1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-profile milling and profile grinding machine brandt - arminius, specifically for stair construction

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

a video of the current machine can be sent on request.

ideal machine for stair builders and solid wood processor
5 units:
1 edge grinding unit with 120 mm band, pneumatic belt tension and electro-pneumatic controlled sanding shoe
2 milling units 1, 5kw to radius milling, swiveling
2 units of profile grinding with belt and electro-pneumatic controlled sanding shoe

secure workpiece clamping chain plates and upper pressure roller
workpiece thickness up to approx. 60 mm
adjustable feed speed
easy pull-out workpiece support
machine is currently equipped with milling cutters r8

operating instructions
ce mark
after painted in places
great machine with outstanding sanding results, hardly rework required. ideal for the efficient production of stairs or table tops.

dimensions approx. 4000 x 1300 x 1900mm (lxwxh). weight approx. 1200kg. 

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". PROFILE MILLING AND PROFILE GRINDING MACHINE BRANDT - ARMINIUS, SPECIFICALLY FOR STAIR CONSTRUCTION THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. IDEAL MACHINE FOR STAIR BUILDERS AND SOLID WOOD PROCESSOR 5 UNITS: 1 EDGE GRINDING UNIT WITH 120 MM BAND, PNEUMATIC BELT TENSION AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE 2 MILLING UNITS 1, 5KW TO RADIUS MILLING, SWIVELING 2 UNITS OF PROFILE GRINDING WITH BELT AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE SECURE WORKPIECE CLAMPING CHAIN PLATES AND UPPER PRESSURE ROLLER WORKPIECE THICKNESS UP TO APPROX. 60 MM ADJUSTABLE FEED SPEED EASY PULL-OUT WORKPIECE SUPPORT MACHINE IS CURRENTLY EQUIPPED WITH MILLING CUTTERS R8 OPERATING INSTRUCTIONS CE MARK AFTER PAINTED IN PLACES GREAT MACHINE WITH OUTSTANDING SANDING RESULTS, HARDLY REWORK REQUIRED. IDEAL FOR THE EFFICIENT PRODUCTION OF STAIRS OR TABLE TOPS. DIMENSIONS APPROX. 4000 X 1300 X 1900MM (LXWXH). WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 26.500 €
Ubicación: Land-; accessories: leistung (brief):81, bereifung (v):15.5-25l2, bereifung (h):15.5-25l2, allrad, kabine, diesel; lift height[mm]: 1250; maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):81, BEREIFUNG (V):15.5-25L2, BEREIFUNG (H):15.5-25L2, ALLRAD, KABINE, DIESEL; LIFT HEIGHT[MM]: 1250; MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

total number of impressions / hours:	38,037hrs 
max speed rating (sheets / hr)	5,000 
sheet size / print size (max / min)	1260 x 840mm max, 500 x 350mm min 
platen force generated – tonne	500 tonnes 
substrate types (paper / board / corrugate)	board 
substrate handling devices and type:	
non-stop feeder / delivery:	yes, but no nonstop swords available 
pile height (with / without non-stop) - feeder	
pile height (with / without non-stop) - delivery	
sheet slow-down device	yes 
anti-static system	yes 
honeycomb plates	3 honeycombs, 6 plates 
number of foil spindle sets in machine	3 
foil streams (max number)	6 
foil reel size (diameter min / max )	30mm / 215mm 
foil reel width (width min / max )	50mm min / 1260mm max 
foil waste removal system & type	hunkler baler 
control console	
honeycomb transporter 
3 honeycombs in total 
6 plates 
foil spindle devices 13 
lifting devices	crane 

estimated overall weight (tonne)	22 tons 
length (m)	9 
width (m)	6 
height (m)	2.8 
total power consumption (volt/phase/amps)	440/3/56 (75a switched supply) 
in production 
good condition 
inspection welcome 
full and complete WE ARE PLEASED TO OFFER: TOTAL NUMBER OF IMPRESSIONS / HOURS: 38,037HRS MAX SPEED RATING (SHEETS / HR) 5,000 SHEET SIZE / PRINT SIZE (MAX / MIN) 1260 X 840MM MAX, 500 X 350MM MIN PLATEN FORCE GENERATED – TONNE 500 TONNES SUBSTRATE TYPES (PAPER / BOARD / CORRUGATE) BOARD SUBSTRATE HANDLING DEVICES AND TYPE: NON-STOP FEEDER / DELIVERY: YES, BUT NO NONSTOP SWORDS AVAILABLE PILE HEIGHT (WITH / WITHOUT NON-STOP) - FEEDER PILE HEIGHT (WITH / WITHOUT NON-STOP) - DELIVERY SHEET SLOW-DOWN DEVICE YES ANTI-STATIC SYSTEM YES HONEYCOMB PLATES 3 HONEYCOMBS, 6 PLATES NUMBER OF FOIL SPINDLE SETS IN MACHINE 3 FOIL STREAMS (MAX NUMBER) 6 FOIL REEL SIZE (DIAMETER MIN / MAX ) 30MM / 215MM FOIL REEL WIDTH (WIDTH MIN / MAX ) 50MM MIN / 1260MM MAX FOIL WASTE REMOVAL SYSTEM & TYPE HUNKLER BALER CONTROL CONSOLE HONEYCOMB TRANSPORTER 3 HONEYCOMBS IN TOTAL 6 PLATES FOIL SPINDLE DEVICES 13 LIFTING DEVICES CRANE ESTIMATED OVERALL WEIGHT (TONNE) 22 TONS LENGTH (M) 9 WIDTH (M) 6 HEIGHT (M) 2.8 TOTAL POWER CONSUMPTION (VOLT/PHASE/AMPS) 440/3/56 (75A SWITCHED SUPPLY) IN PRODUCTION GOOD CONDITION INSPECTION WELCOME FULL AND COMPLETE
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 800 mm<br/>z-travel: 800 mm<br/>control: heidenhain mill plus it <br/>table surface area: Ø 900 x 700 mm<br/>milling-head swivable   +/-: +30/-120 °<br/>tool adaptor: hsk 63 <br/>turning speeds: 18.000 u/min<br/>power capacity - milling spindle: 35 kw<br/>: 40 st.<br/>table load: 1,4 t<br/>dimensions (hxwxd): 5,0 x 4,25 x 3,1 m<br/>total power requirement: 70 kva<br/>weight of the machine ca.: 9,0 t<br/>5- axis universal machining centre with swiveling head and round table<br/><br/>- round table Ø 900 x 700 mm<br/>- swiveling head (full axis)<br/>- 3d- probe heidenhain ts 641<br/>- blum laser tool setter<br/>- chip conveyor<br/>- internal coolant with filter<br/>- air blast trought spindle<br/>- mode 4 (manual working with open door)<br/>- ext .elec. hand wheel<br/><br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 800 MM
CONTROL: HEIDENHAIN MILL PLUS IT
TABLE SURFACE AREA: Ø 900 X 700 MM
MILLING-HEAD SWIVABLE +/-: +30/-120 °
TOOL ADAPTOR: HSK 63
TURNING SPEEDS: 18.000 U/MIN
POWER CAPACITY - MILLING SPINDLE: 35 KW
: 40 ST.
TABLE LOAD: 1,4 T
DIMENSIONS (HXWXD): 5,0 X 4,25 X 3,1 M
TOTAL POWER REQUIREMENT: 70 KVA
WEIGHT OF THE MACHINE CA.: 9,0 T
5- AXIS UNIVERSAL MACHINING CENTRE WITH SWIVELING HEAD AND ROUND TABLE

- ROUND TABLE Ø 900 X 700 MM
- SWIVELING HEAD (FULL AXIS)
- 3D- PROBE HEIDENHAIN TS 641
- BLUM LASER TOOL SETTER
- CHIP CONVEYOR
- INTERNAL COOLANT WITH FILTER
- AIR BLAST TROUGHT SPINDLE
- MODE 4 (MANUAL WORKING WITH OPEN DOOR)
- EXT .ELEC. HAND WHEEL





Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-technical data
 tip height 110 mm
 centre distance 300 mm
 swing over cross slide 115 mm
 spindle bore 32 mm
 sled:
 longitudinal travel (z axis) 295 mm
 plan travel (x-axis) 220 mm
 turret slide: number 1
 number of positions revolver 8
 sleeve diameter 35 mm
 spindle retainer: camlock
 spindle speeds:
 continuously variable from 30 rpm to 6000 rpm
 tailstock quill recording:
 morse taper 2 mk
 quill stroke 100 mm
 feeds: continuously variable
 length of 0.1 mm / min up to 5000 mm/min
 map of 0.1 mm / min up to 5000 mm/min
 rapid traverse 10 m / min
 kw spindle motor 5.50
 connection 50 hz 3 x 380 volt
 machine weight 1350 kg
 dimensions machine:
 length 1700 mm
 1942 mm wide
 1774 mm

miscellaneous accessories:
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 c axis with interpolation
 chip conveyor
 tool holder set
 driven tool holders
 collet chucks
 bucher TECHNICAL DATA TIP HEIGHT 110 MM CENTRE DISTANCE 300 MM SWING OVER CROSS SLIDE 115 MM SPINDLE BORE 32 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 295 MM PLAN TRAVEL (X-AXIS) 220 MM TURRET SLIDE: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 SLEEVE DIAMETER 35 MM SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE FROM 30 RPM TO 6000 RPM TAILSTOCK QUILL RECORDING: MORSE TAPER 2 MK QUILL STROKE 100 MM FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0.1 MM / MIN UP TO 5000 MM/MIN MAP OF 0.1 MM / MIN UP TO 5000 MM/MIN RAPID TRAVERSE 10 M / MIN KW SPINDLE MOTOR 5.50 CONNECTION 50 HZ 3 X 380 VOLT MACHINE WEIGHT 1350 KG DIMENSIONS MACHINE: LENGTH 1700 MM 1942 MM WIDE 1774 MM MISCELLANEOUS ACCESSORIES: LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 C AXIS WITH INTERPOLATION CHIP CONVEYOR TOOL HOLDER SET DRIVEN TOOL HOLDERS COLLET CHUCKS BUCHER
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-x-travel: 1250 mm<br/>y-travel: 880 mm<br/>z-travel: 800 mm<br/>control: heidenhain mill plus it <br/>table surface area: 1500 x 1050 mm<br/>tool adaptor: sk 40 <br/>turning speeds: 18.000 u/min<br/>power capacity - milling spindle:  kw<br/>: 30 st.<br/>table load: 2,5 t<br/>dimensions (hxwxd): 7,0 x 3,0 x 3,0 m<br/>total power requirement: 70 kva<br/>weight of the machine ca.: 12,5 t<br/>-cnc -machining centre with atc<br/><br/>-  heidenhain mill plus it                <br/>-  internal coolant                        <br/>- 600 l coolant tank<br/>- chip conveyor<br/>- ext. hand wheel<br/>- manual head<br/>- tool measuring heidenhain tt 130<br/><br/>- air blast trought spindle<br/>- mode 4 (manual working with open door)<br/>- ext .elec. hand wheel<br/><br/><br/><br/><br/><br/> X-TRAVEL: 1250 MM
Y-TRAVEL: 880 MM
Z-TRAVEL: 800 MM
CONTROL: HEIDENHAIN MILL PLUS IT
TABLE SURFACE AREA: 1500 X 1050 MM
TOOL ADAPTOR: SK 40
TURNING SPEEDS: 18.000 U/MIN
POWER CAPACITY - MILLING SPINDLE: KW
: 30 ST.
TABLE LOAD: 2,5 T
DIMENSIONS (HXWXD): 7,0 X 3,0 X 3,0 M
TOTAL POWER REQUIREMENT: 70 KVA
WEIGHT OF THE MACHINE CA.: 12,5 T
-CNC -MACHINING CENTRE WITH ATC

- HEIDENHAIN MILL PLUS IT
- INTERNAL COOLANT
- 600 L COOLANT TANK
- CHIP CONVEYOR
- EXT. HAND WHEEL
- MANUAL HEAD
- TOOL MEASURING HEIDENHAIN TT 130

- AIR BLAST TROUGHT SPINDLE
- MODE 4 (MANUAL WORKING WITH OPEN DOOR)
- EXT .ELEC. HAND WHEEL





Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMA&ATILDE;?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: &ACIRC;?&NOT;225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: &ACIRC;&MIDDOT; LENGTH OF THE STREETS: CA 51M &ACIRC;&MIDDOT; HEIGHT OF THE SHELVES: CA 9, 3 M &ACIRC;&MIDDOT; SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: &ACIRC;&SECT; NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS &ACIRC;&SECT; DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM &ACIRC;&SECT; SEKTORIERUNG OF THE SHELVES POSSIBLE &ACIRC;&MIDDOT; CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS &ACIRC;&MIDDOT; NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / &ACIRC;&MIDDOT; SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-number of milling spindles: 1 st.<br/>fence: ja ja /nein<br/>workpiece: ja <br/>crosscutting milling machine stegherr, type ksf-mini<br/><br/><br/>special milling machine for the efficient production of crossbar joints.<br/><br/>the cross-grain milling machine ksf-mini is the product of great experience of <br/>the company<br/>stegherr in the construction of this special milling machine for cross-rung <br/>joints.<br/><br/>with the ksf-mini all can be found in practice<br/>cross joint connections<br/>be produced quickly and accurately. also already profiled sprouts<br/>can be<br/>on the ksf-mini edit. the precise milling is achieved because the<br/>workpiece in<br/>a clamping is handled on three sides.<br/><br/>the tool drive takes place via two three-phase motors, the tension of<br/>workpieces pneumatic.<br/><br/>the profile cutter is designed for the web width. the saw blades, which are the<br/>flatten out,<br/>are adjustable by intermediate rings to the dimensions of the profile cutter.<br/><br/>the swivel device is free of play.<br/><br/>the machine is designed for a maximum workpiece cross section of 56 x 46<br/>mm.<br/><br/>motor 2.2 kw, 380 v 50 hz<br/><br/>pneumatic pressure 6 bar<br/><br/>included:<br/><br/>- footswitch operation<br/>- table base<br/>- ruler<br/>- 2 saw blades<br/>- 1 profile cutter<br/><br/>(technical data according to the manufacturer, without guarantee!)<br/><br/><br/><br/><br/> NUMBER OF MILLING SPINDLES: 1 ST.
FENCE: JA JA /NEIN
WORKPIECE: JA
CROSSCUTTING MILLING MACHINE STEGHERR, TYPE KSF-MINI


SPECIAL MILLING MACHINE FOR THE EFFICIENT PRODUCTION OF CROSSBAR JOINTS.

THE CROSS-GRAIN MILLING MACHINE KSF-MINI IS THE PRODUCT OF GREAT EXPERIENCE OF
THE COMPANY
STEGHERR IN THE CONSTRUCTION OF THIS SPECIAL MILLING MACHINE FOR CROSS-RUNG
JOINTS.

WITH THE KSF-MINI ALL CAN BE FOUND IN PRACTICE
CROSS JOINT CONNECTIONS
BE PRODUCED QUICKLY AND ACCURATELY. ALSO ALREADY PROFILED SPROUTS
CAN BE
ON THE KSF-MINI EDIT. THE PRECISE MILLING IS ACHIEVED BECAUSE THE
WORKPIECE IN
A CLAMPING IS HANDLED ON THREE SIDES.

THE TOOL DRIVE TAKES PLACE VIA TWO THREE-PHASE MOTORS, THE TENSION OF
WORKPIECES PNEUMATIC.

THE PROFILE CUTTER IS DESIGNED FOR THE WEB WIDTH. THE SAW BLADES, WHICH ARE THE
FLATTEN OUT,
ARE ADJUSTABLE BY INTERMEDIATE RINGS TO THE DIMENSIONS OF THE PROFILE CUTTER.

THE SWIVEL DEVICE IS FREE OF PLAY.

THE MACHINE IS DESIGNED FOR A MAXIMUM WORKPIECE CROSS SECTION OF 56 X 46
MM.

MOTOR 2.2 KW, 380 V 50 HZ

PNEUMATIC PRESSURE 6 BAR

INCLUDED:

- FOOTSWITCH OPERATION
- TABLE BASE
- RULER
- 2 SAW BLADES
- 1 PROFILE CUTTER

(TECHNICAL DATA ACCORDING TO THE MANUFACTURER, WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-3000 x 1500 mm with pallet changer, byloader, updated monitor,
cooler, filter, 5 + 7, 5 cutting head, sick light barrier, on time 63973, cutting time 31200, turbo and glass revision at cutting time 22787 hours.
in really good condition, working in production, can be delivered august 2019, service made in march 2019 
 3000 X 1500 MM WITH PALLET CHANGER, BYLOADER, UPDATED MONITOR, COOLER, FILTER, 5 + 7, 5 CUTTING HEAD, SICK LIGHT BARRIER, ON TIME 63973, CUTTING TIME 31200, TURBO AND GLASS REVISION AT CUTTING TIME 22787 HOURS. IN REALLY GOOD CONDITION, WORKING IN PRODUCTION, CAN BE DELIVERED AUGUST 2019, SERVICE MADE IN MARCH 2019
Vendedor: K N Machinery
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 60/50 mm<br/>control: ja <br/>!! machine is still in use !!<br/><br/>window system gubisch est-h 2000<br/><br/><br/>ablängsäge<br/>----------------<br/>engine 3 kw<br/>speed: 3,000 rpm<br/>saw blade diameter: 400 mm<br/>flange diameter: 80 mm<br/>adjustment: horizontal: manual after mechanical display<br/>adjustment range: 0 - 120 mm<br/><br/>length stop<br/>----------------------<br/>length 3,250 mm, by hand<br/><br/>slot spindle<br/>-------------------<br/>engine 9.2 kw<br/>spindle speed: 4,500 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 300 mm<br/>spindle stroke vertical: 3 x 100 mm for iv 68 - iv 92<br/>tool diameter: max. 400 / min 240 mm<br/>adjustment: horizontal u. vertically in the u-hub<br/>adjustment range: vertical 210 mm under table<br/>number of tools: 3 tool sets a 100 mm<br/><br/>shortest workpieces: 320 mm + spigot<br/><br/><br/>clamping table<br/>----------------------<br/><br/>on ball guide bushes and roller guides<br/><br/>swivel range: yes, 60 degrees in both directions<br/>speeds: 0-28 m / min. infinitely variable, 4 speed ranges<br/>type of counter-timber: counter-disc for 6 tool contour contours, the<br/>be automatically controlled for the intended tool sets.<br/>handover: automatically<br/>mode of operation: individual production, frame-by-frame production and mass <br/>production possible<br/><br/>longitudinal profiling<br/>----------------------<br/><br/>1. profile spindle with synchronous dipping automatic<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>equal and counter run for tear-free refolding<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>2. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>3. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 240 mm<br/><br/>4. spindle glass bead sawing unit, horizontally above<br/>-------------------------------------------------- --------------------<br/>engine 3 kw<br/>revolutions: 3000 rpm<br/>adjustment: horizontal high-low<br/>circle diameter: 250 mm<br/>clamping flange holder: 60 mm diameter<br/>pneumatic glazing bead strip with non-return valve<br/><br/>other features<br/>-------------------------<br/>umfälzeinrichtung<br/>lubricant pump man.<br/>outfeed roller<br/>support rail, swing-out as frame support, from 500 mm to 1000 mm<br/>to fold over<br/><br/>12 inch screen control<br/><br/>option:<br/>********<br/>used window tools oppold iv 68/78 wood 13er achsmaß<br/>bore: 60/50<br/>140 drainage edge<br/>slot: zero 322<br/><br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 60/50 MM
CONTROL: JA
!! MACHINE IS STILL IN USE !!

WINDOW SYSTEM GUBISCH EST-H 2000


ABLäNGSäGE
----------------
ENGINE 3 KW
SPEED: 3,000 RPM
SAW BLADE DIAMETER: 400 MM
FLANGE DIAMETER: 80 MM
ADJUSTMENT: HORIZONTAL: MANUAL AFTER MECHANICAL DISPLAY
ADJUSTMENT RANGE: 0 - 120 MM

LENGTH STOP
----------------------
LENGTH 3,250 MM, BY HAND

SLOT SPINDLE
-------------------
ENGINE 9.2 KW
SPINDLE SPEED: 4,500 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 300 MM
SPINDLE STROKE VERTICAL: 3 X 100 MM FOR IV 68 - IV 92
TOOL DIAMETER: MAX. 400 / MIN 240 MM
ADJUSTMENT: HORIZONTAL U. VERTICALLY IN THE U-HUB
ADJUSTMENT RANGE: VERTICAL 210 MM UNDER TABLE
NUMBER OF TOOLS: 3 TOOL SETS A 100 MM

SHORTEST WORKPIECES: 320 MM + SPIGOT


CLAMPING TABLE
----------------------

ON BALL GUIDE BUSHES AND ROLLER GUIDES

SWIVEL RANGE: YES, 60 DEGREES IN BOTH DIRECTIONS
SPEEDS: 0-28 M / MIN. INFINITELY VARIABLE, 4 SPEED RANGES
TYPE OF COUNTER-TIMBER: COUNTER-DISC FOR 6 TOOL CONTOUR CONTOURS, THE
BE AUTOMATICALLY CONTROLLED FOR THE INTENDED TOOL SETS.
HANDOVER: AUTOMATICALLY
MODE OF OPERATION: INDIVIDUAL PRODUCTION, FRAME-BY-FRAME PRODUCTION AND MASS
PRODUCTION POSSIBLE

LONGITUDINAL PROFILING
----------------------

1. PROFILE SPINDLE WITH SYNCHRONOUS DIPPING AUTOMATIC
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
EQUAL AND COUNTER RUN FOR TEAR-FREE REFOLDING
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

2. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

3. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 240 MM

4. SPINDLE GLASS BEAD SAWING UNIT, HORIZONTALLY ABOVE
-------------------------------------------------- --------------------
ENGINE 3 KW
REVOLUTIONS: 3000 RPM
ADJUSTMENT: HORIZONTAL HIGH-LOW
CIRCLE DIAMETER: 250 MM
CLAMPING FLANGE HOLDER: 60 MM DIAMETER
PNEUMATIC GLAZING BEAD STRIP WITH NON-RETURN VALVE

OTHER FEATURES
-------------------------
UMFäLZEINRICHTUNG
LUBRICANT PUMP MAN.
OUTFEED ROLLER
SUPPORT RAIL, SWING-OUT AS FRAME SUPPORT, FROM 500 MM TO 1000 MM
TO FOLD OVER

12 INCH SCREEN CONTROL

OPTION:
********
USED WINDOW TOOLS OPPOLD IV 68/78 WOOD 13ER ACHSMAß
BORE: 60/50
140 DRAINAGE EDGE
SLOT: ZERO 322


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-model year: 2012
working tonnage: 200.000 tons
in a good condition, no maintenance is required

please contact us for more detailed information MODEL YEAR: 2012 WORKING TONNAGE: 200.000 TONS IN A GOOD CONDITION, NO MAINTENANCE IS REQUIRED PLEASE CONTACT US FOR MORE DETAILED INFORMATION
Vendedor: Scandinavian & UK Machines
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-model year: 2016
working tonnage: 300.000 tons

in a good condition, no maintenance is required
please contact for more detailed information  MODEL YEAR: 2016 WORKING TONNAGE: 300.000 TONS IN A GOOD CONDITION, NO MAINTENANCE IS REQUIRED PLEASE CONTACT FOR MORE DETAILED INFORMATION
Vendedor: Scandinavian & UK Machines
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 37.500 €
Ubicación: Land-quick coupler mechanically lenhoff ms 21
23.7 to
hammer grapple
betankungspume
 QUICK COUPLER MECHANICALLY LENHOFF MS 21 23.7 TO HAMMER GRAPPLE BETANKUNGSPUME
Vendedor: Carsten Schneider GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.060 €
Ubicación: Land-we offer for sale: used pallet racks,

manufacturer: jungheinrich type: b

scope of delivery: for 84 pitches

15 stand, height approx. 2,250 x 1,100 mm

56 runs, approx. 1,900 x k130 mm

112 pins for trusses

30 ground anchor m 12 mm

technical data:

shelf height of 2,250 mm

shelf depth 1,100 mm

payload field 6,000 kg

load capacity per 3,000 kg pair of traverse

manufacturer jungheinrich type: b

blue border color

color of the bars yellow
 

shipping:
cheaper shipping with several low-cost carriers can. 

please ask the freight specifying your postcode and location, as well as the desired quantity.

the eth ericus transport - u. handelsges. m.b.h exclusively used pallet racks to professionally installed offers you
a testing stand according to din en 15635.

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

eth professional shelf since 1983. 
WE OFFER FOR SALE: USED PALLET RACKS, MANUFACTURER: JUNGHEINRICH TYPE: B SCOPE OF DELIVERY: FOR 84 PITCHES 15 STAND, HEIGHT APPROX. 2,250 X 1,100 MM 56 RUNS, APPROX. 1,900 X K130 MM 112 PINS FOR TRUSSES 30 GROUND ANCHOR M 12 MM TECHNICAL DATA: SHELF HEIGHT OF 2,250 MM SHELF DEPTH 1,100 MM PAYLOAD FIELD 6,000 KG LOAD CAPACITY PER 3,000 KG PAIR OF TRAVERSE MANUFACTURER JUNGHEINRICH TYPE: B BLUE BORDER COLOR COLOR OF THE BARS YELLOW SHIPPING: CHEAPER SHIPPING WITH SEVERAL LOW-COST CARRIERS CAN. PLEASE ASK THE FREIGHT SPECIFYING YOUR POSTCODE AND LOCATION, AS WELL AS THE DESIRED QUANTITY. THE ETH ERICUS TRANSPORT - U. HANDELSGES. M.B.H EXCLUSIVELY USED PALLET RACKS TO PROFESSIONALLY INSTALLED OFFERS YOU A TESTING STAND ACCORDING TO DIN EN 15635. WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 mm
	-space requirement approx.	         b t 810 x 570 x h 1260 mm
-weight approx.					  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 x 20 mm
	-space requirement approx.	 		 b t 810 x 570 x h 1260 mm
-weight approx.					  	  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 X 20 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-press brake
manufacturer: trumpf
type: trumabend v 130 x
year of construction: 2001
control: delem da 65
hours of operation: 18.510 h

bending length: 3060 mm
pressing force: to 130
stroke: 365 mm
usable height: 535 mm
free stã¤nderduchgang: 2690 mm
throat depth: 410 mm
y rapid speed: 200 mm / s
y operation: 1-10 mm/s
y-return: 135 mm / s
working height: 1050 mm
length: 2680 mm
width: 2060 mm
height: 2885 mm
: weight 12950

robust machine frame as a welded construction in all-steel construction
pressure bar with high flexural strength
electro-hydraulic top drive proportional valves
modern block hydraulic
cnc back gauge with rack and pinion ritizelantrieb, for x - and r-axis,
risk free move the stop fingers from the front
upper tool holder "modufix", manual
substation train recording for ev matrices, clamp manual,
shift can be programmed
safety devices
2d-grafiksteuerung da 69ts with 12-inch grayscale screen
electrical equipment for three-phase 400v / 50 hz
cnc crowning
increase height and stroke to the 150 mm to 535 mm
advanced material handling
2 piece quick adjustable support bracket, front
bending help, 1-bending aid arm
extension table right
extension table left
table extension in x for basic and supplementary table
park position right, 190 mm long
advanced tool holder and angle measurement system
hydraulic top tool holder "modufix"
substation stuff recording for single-v matrices with hydraulic clamping
machine-side preparation for acb angle sensor
stages of development stop system
6-axis back gauge x 1 / x 2, r1/r2, z1/z2
stages of development control
additional foot switch

PRESS BRAKE MANUFACTURER: TRUMPF TYPE: TRUMABEND V 130 X YEAR OF CONSTRUCTION: 2001 CONTROL: DELEM DA 65 HOURS OF OPERATION: 18.510 H BENDING LENGTH: 3060 MM PRESSING FORCE: TO 130 STROKE: 365 MM USABLE HEIGHT: 535 MM FREE ST&ATILDE;&CURREN;NDERDUCHGANG: 2690 MM THROAT DEPTH: 410 MM Y RAPID SPEED: 200 MM / S Y OPERATION: 1-10 MM/S Y-RETURN: 135 MM / S WORKING HEIGHT: 1050 MM LENGTH: 2680 MM WIDTH: 2060 MM HEIGHT: 2885 MM : WEIGHT 12950 ROBUST MACHINE FRAME AS A WELDED CONSTRUCTION IN ALL-STEEL CONSTRUCTION PRESSURE BAR WITH HIGH FLEXURAL STRENGTH ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES MODERN BLOCK HYDRAULIC CNC BACK GAUGE WITH RACK AND PINION RITIZELANTRIEB, FOR X - AND R-AXIS, RISK FREE MOVE THE STOP FINGERS FROM THE FRONT UPPER TOOL HOLDER "MODUFIX", MANUAL SUBSTATION TRAIN RECORDING FOR EV MATRICES, CLAMP MANUAL, SHIFT CAN BE PROGRAMMED SAFETY DEVICES 2D-GRAFIKSTEUERUNG DA 69TS WITH 12-INCH GRAYSCALE SCREEN ELECTRICAL EQUIPMENT FOR THREE-PHASE 400V / 50 HZ CNC CROWNING INCREASE HEIGHT AND STROKE TO THE 150 MM TO 535 MM ADVANCED MATERIAL HANDLING 2 PIECE QUICK ADJUSTABLE SUPPORT BRACKET, FRONT BENDING HELP, 1-BENDING AID ARM EXTENSION TABLE RIGHT EXTENSION TABLE LEFT TABLE EXTENSION IN X FOR BASIC AND SUPPLEMENTARY TABLE PARK POSITION RIGHT, 190 MM LONG ADVANCED TOOL HOLDER AND ANGLE MEASUREMENT SYSTEM HYDRAULIC TOP TOOL HOLDER "MODUFIX" SUBSTATION STUFF RECORDING FOR SINGLE-V MATRICES WITH HYDRAULIC CLAMPING MACHINE-SIDE PREPARATION FOR ACB ANGLE SENSOR STAGES OF DEVELOPMENT STOP SYSTEM 6-AXIS BACK GAUGE X 1 / X 2, R1/R2, Z1/Z2 STAGES OF DEVELOPMENT CONTROL ADDITIONAL FOOT SWITCH
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-press brake manufacturer: trumpf
type: trumabend v 85
year of construction: 1997
control: delem da 65
hours of operation: 25.690 h

bending length: 2050 mm
pressing force: 85 to
stroke: 215 mm
usable height: 385 mm
free stã¤nderduchgang: 1750 mm
throat depth: 410 mm
y rapid speed: 200 mm / s
y operation: 1-11 mm/s
y-return: 135 mm / s
working height: 1050 mm
length: 2680 mm
width: 2100 mm
height: 2885 mm
weight: 9600 kg

robust machine frame as a welded construction in all-steel construction

pressure bar with high flexural strength

electro-hydraulic top drive proportional valves

modern block hydraulic

spherical suspension and angular position of the pressure bar

2-cylinder version y1 / y2

cnc back gauge with rack-pinion drive, for x - and r-axis

safe moving of the stop fingers from the front

self-centering upper sleeve

hardened substation stuff recording

2 piece stop fingers

plunger measuring system with on springback compensation via glass scale

tool change vertical

programmatic substation stuff shift (i axis) for 2 positions

protection cover

cnc crowning

2 quick adjustable support bracket, front

PRESS BRAKE MANUFACTURER: TRUMPF TYPE: TRUMABEND V 85 YEAR OF CONSTRUCTION: 1997 CONTROL: DELEM DA 65 HOURS OF OPERATION: 25.690 H BENDING LENGTH: 2050 MM PRESSING FORCE: 85 TO STROKE: 215 MM USABLE HEIGHT: 385 MM FREE ST&ATILDE;&CURREN;NDERDUCHGANG: 1750 MM THROAT DEPTH: 410 MM Y RAPID SPEED: 200 MM / S Y OPERATION: 1-11 MM/S Y-RETURN: 135 MM / S WORKING HEIGHT: 1050 MM LENGTH: 2680 MM WIDTH: 2100 MM HEIGHT: 2885 MM WEIGHT: 9600 KG ROBUST MACHINE FRAME AS A WELDED CONSTRUCTION IN ALL-STEEL CONSTRUCTION PRESSURE BAR WITH HIGH FLEXURAL STRENGTH ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES MODERN BLOCK HYDRAULIC SPHERICAL SUSPENSION AND ANGULAR POSITION OF THE PRESSURE BAR 2-CYLINDER VERSION Y1 / Y2 CNC BACK GAUGE WITH RACK-PINION DRIVE, FOR X - AND R-AXIS SAFE MOVING OF THE STOP FINGERS FROM THE FRONT SELF-CENTERING UPPER SLEEVE HARDENED SUBSTATION STUFF RECORDING 2 PIECE STOP FINGERS PLUNGER MEASURING SYSTEM WITH ON SPRINGBACK COMPENSATION VIA GLASS SCALE TOOL CHANGE VERTICAL PROGRAMMATIC SUBSTATION STUFF SHIFT (I AXIS) FOR 2 POSITIONS PROTECTION COVER CNC CROWNING 2 QUICK ADJUSTABLE SUPPORT BRACKET, FRONT
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-press brake
manufacturer: trumpf
type: trumabend v 85
year of construction: 2002
control: delem da 65
hours of operation: 30.702 h

bending length: 2050 mm
pressing force: 85 to
stroke: 215 mm
usable height: 385 mm
free stã¤nderduchgang: 1750 mm
throat depth: 410 mm
y rapid speed: 200 mm / s
y operation: 1-10 mm/s
y-return: 135 mm / s
working height: 1050 mm
length: 2680 mm
width: 2100 mm
height: 2375 mm
weight: 7900 kg

upper drive concept n two cylinder type y1 / y2
electro-hydraulic tappet drive via proportional valve technology
tappet position measuring system with on springback compensation via glass scale
modern block hydraulic
spherical suspension and angular position of the pressure bar
cnc rear stop system
safe finger adjustment from the front
2 piece stop fingers
self-centring, manually, hardened upper sleeve for vertical tool change
hardened, manual recording of substation stuff
programmatic substation stuff shift (i axis) for 2 positions
flat front cover
modern protective cover
ce mark
oil cooler
trailing stop system 4 axes (x, r, z1, z2)
top tool clamping hydraulically and hardened
substation stuff clamp hydraulic
cnc crowning
preparation acb angle measuring system
2 edition console
 PRESS BRAKE MANUFACTURER: TRUMPF TYPE: TRUMABEND V 85 YEAR OF CONSTRUCTION: 2002 CONTROL: DELEM DA 65 HOURS OF OPERATION: 30.702 H BENDING LENGTH: 2050 MM PRESSING FORCE: 85 TO STROKE: 215 MM USABLE HEIGHT: 385 MM FREE ST&ATILDE;&CURREN;NDERDUCHGANG: 1750 MM THROAT DEPTH: 410 MM Y RAPID SPEED: 200 MM / S Y OPERATION: 1-10 MM/S Y-RETURN: 135 MM / S WORKING HEIGHT: 1050 MM LENGTH: 2680 MM WIDTH: 2100 MM HEIGHT: 2375 MM WEIGHT: 7900 KG UPPER DRIVE CONCEPT N TWO CYLINDER TYPE Y1 / Y2 ELECTRO-HYDRAULIC TAPPET DRIVE VIA PROPORTIONAL VALVE TECHNOLOGY TAPPET POSITION MEASURING SYSTEM WITH ON SPRINGBACK COMPENSATION VIA GLASS SCALE MODERN BLOCK HYDRAULIC SPHERICAL SUSPENSION AND ANGULAR POSITION OF THE PRESSURE BAR CNC REAR STOP SYSTEM SAFE FINGER ADJUSTMENT FROM THE FRONT 2 PIECE STOP FINGERS SELF-CENTRING, MANUALLY, HARDENED UPPER SLEEVE FOR VERTICAL TOOL CHANGE HARDENED, MANUAL RECORDING OF SUBSTATION STUFF PROGRAMMATIC SUBSTATION STUFF SHIFT (I AXIS) FOR 2 POSITIONS FLAT FRONT COVER MODERN PROTECTIVE COVER CE MARK OIL COOLER TRAILING STOP SYSTEM 4 AXES (X, R, Z1, Z2) TOP TOOL CLAMPING HYDRAULICALLY AND HARDENED SUBSTATION STUFF CLAMP HYDRAULIC CNC CROWNING PREPARATION ACB ANGLE MEASURING SYSTEM 2 EDITION CONSOLE
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand extrusion press line
mfc.:	clecim, rexroth, oilgear, eri, omav, auburtin	
type:	horizontal front loading press
built:	1986		continuously modernised!	stopped production in 2009
force:	3000 mt		pressure:	300 bar
billet dia.:	9.5” can be modified to 9”	billet length:	540 – 1080 mm
automation	plc siemens s7-400 cpu to control press and furnace
plc siemens s5-135 cpu to control profile exit table and traction bench plc pb400 merlin to control roller table, cold saw, stacker, spacer feeder.
scope of supply:	feeding system	billet furnace		hot shear
	extrusion press	run-out table		double puller		hot saw
	stretcher 	finishing saw           stacker
  QTY. 1 SECOND-HAND EXTRUSION PRESS LINE MFC.: CLECIM, REXROTH, OILGEAR, ERI, OMAV, AUBURTIN TYPE: HORIZONTAL FRONT LOADING PRESS BUILT: 1986 CONTINUOUSLY MODERNISED! STOPPED PRODUCTION IN 2009 FORCE: 3000 MT PRESSURE: 300 BAR BILLET DIA.: 9.5” CAN BE MODIFIED TO 9” BILLET LENGTH: 540 – 1080 MM AUTOMATION PLC SIEMENS S7-400 CPU TO CONTROL PRESS AND FURNACE PLC SIEMENS S5-135 CPU TO CONTROL PROFILE EXIT TABLE AND TRACTION BENCH PLC PB400 MERLIN TO CONTROL ROLLER TABLE, COLD SAW, STACKER, SPACER FEEDER. SCOPE OF SUPPLY: FEEDING SYSTEM BILLET FURNACE HOT SHEAR EXTRUSION PRESS RUN-OUT TABLE DOUBLE PULLER HOT SAW STRETCHER FINISHING SAW STACKER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-procedures: 1200 x 650 x 500 mm [x x y x z]
table size x 1600 mm
table size y: 1000 mm
maximum workpiece weight: 5000 kg
maximum electrode weight: 100 kg
electrode changer: 12 - fold
c-axis
work pool: 2100 x 1250 x 650 mm
quill arbor: erowa PROCEDURES: 1200 X 650 X 500 MM [X X Y X Z] TABLE SIZE X 1600 MM TABLE SIZE Y: 1000 MM MAXIMUM WORKPIECE WEIGHT: 5000 KG MAXIMUM ELECTRODE WEIGHT: 100 KG ELECTRODE CHANGER: 12 - FOLD C-AXIS WORK POOL: 2100 X 1250 X 650 MM QUILL ARBOR: EROWA
Vendedor: Mac-Tec
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mod. e130 cnc yasnac
quick 50 mt
axis travel x400 y300 z300
tool changing positions 12
light chuck
pallet's da 150-450
water through the chuck
2 pallet's 400x300
chuck 10000
attack
bt30
year of construction 2004 MOD. E130 CNC YASNAC QUICK 50 MT AXIS TRAVEL X400 Y300 Z300 TOOL CHANGING POSITIONS 12 LIGHT CHUCK PALLET'S DA 150-450 WATER THROUGH THE CHUCK 2 PALLET'S 400X300 CHUCK 10000 ATTACK BT30 YEAR OF CONSTRUCTION 2004
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1000 x 900 x 1250 mm<br/>description: pur w.puffe premelting unit<br> serial number 320200483/001<br> voltage 400 v<br> 23,000 watt<br> ce standards WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 900 X 1250 MM
DESCRIPTION: PUR W.PUFFE PREMELTING UNIT
SERIAL NUMBER 320200483/001
VOLTAGE 400 V
23,000 WATT
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine was overhauled. two years ago, she got a new main spindle.

z axis should be checked in time.

technical data:

brand: kondia

type: cm

control: heidenhain tnc 410

bj: 1996

x traverse paths 650.0 mm
y travel 350.0 mm
z travel 380.0 mm
type 660.0 mm cnc range length
pallet width 350.0 mm
workpiece weight tool changer 18.0
bt40 spindle cone
spindle turning 6000 rpm

MACHINE WAS OVERHAULED. TWO YEARS AGO, SHE GOT A NEW MAIN SPINDLE. Z AXIS SHOULD BE CHECKED IN TIME. TECHNICAL DATA: BRAND: KONDIA TYPE: CM CONTROL: HEIDENHAIN TNC 410 BJ: 1996 X TRAVERSE PATHS 650.0 MM Y TRAVEL 350.0 MM Z TRAVEL 380.0 MM TYPE 660.0 MM CNC RANGE LENGTH PALLET WIDTH 350.0 MM WORKPIECE WEIGHT TOOL CHANGER 18.0 BT40 SPINDLE CONE SPINDLE TURNING 6000 RPM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 900 €
Ubicación: Land-martin - rigid cutter type t 21, iron stand, milling 30 + 40 mm, circulating oil lubrication, 4 rpm 3000/4500/6000/9000 rpm, motor 5.5 kw - 380 volt, pole changing bar shaper fence with fine adjustment, very good condition, made in germany MARTIN - RIGID CUTTER TYPE T 21, IRON STAND, MILLING 30 + 40 MM, CIRCULATING OIL LUBRICATION, 4 RPM 3000/4500/6000/9000 RPM, MOTOR 5.5 KW - 380 VOLT, POLE CHANGING BAR SHAPER FENCE WITH FINE ADJUSTMENT, VERY GOOD CONDITION, MADE IN GERMANY
Vendedor: voelkel-hightech
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 11 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 11 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-- powder booth: pbs variocolor 
- space powder booth b/t/h: 11 x 4 x 7 m
- powder guns: 3 automatic mast 
- manual spray guns: 2 pieces
- mast: 2 pcs. with size detection 
- workpiece size w x d x h: 1000 x (x) x 2500 mm 

- cyclone: pbs b/t/h 7/2/2 m 
- cyclone : with recovery 
- fire-fighting system: sts 
- final filter: level under powder booth 
- space final filter w/d/h: 11 x 8 x 2.5 m

details:
cabine, cyclone, powder centre, recovery, final filter (manufacturer pbs), application consisting of 6 automatic pistols and 2 hand pistols (manufacturer wagner), fire-fighting system (manufacturer sts)    - POWDER BOOTH: PBS VARIOCOLOR - SPACE POWDER BOOTH B/T/H: 11 X 4 X 7 M - POWDER GUNS: 3 AUTOMATIC MAST - MANUAL SPRAY GUNS: 2 PIECES - MAST: 2 PCS. WITH SIZE DETECTION - WORKPIECE SIZE W X D X H: 1000 X (X) X 2500 MM - CYCLONE: PBS B/T/H 7/2/2 M - CYCLONE : WITH RECOVERY - FIRE-FIGHTING SYSTEM: STS - FINAL FILTER: LEVEL UNDER POWDER BOOTH - SPACE FINAL FILTER W/D/H: 11 X 8 X 2.5 M DETAILS: CABINE, CYCLONE, POWDER CENTRE, RECOVERY, FINAL FILTER (MANUFACTURER PBS), APPLICATION CONSISTING OF 6 AUTOMATIC PISTOLS AND 2 HAND PISTOLS (MANUFACTURER WAGNER), FIRE-FIGHTING SYSTEM (MANUFACTURER STS)
Vendedor: Alfred Feldmann Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 11 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 11 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.300 €
Ubicación: Land- we offer for sale:

pallet racks for 960 sites

manufacturer: euro stock

material:

19 uprights, approx. 6,200 x 1,000 mm

69 uprights, approx. 7,000 x 1,000 mm

480 traverses approximately 2,900 x k140 mm

960 pins 176 ground anchor m 12 mm

technical data:

frame elevation 6,200-7.000 mm

shelf depth 1000 mm

load range 933 kg

payload field 8,500 kg

payload specialist 2,800 kg

frame blue

beams blue

in stock: 21698 harsefeld

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983.  WE OFFER FOR SALE: PALLET RACKS FOR 960 SITES MANUFACTURER: EURO STOCK MATERIAL: 19 UPRIGHTS, APPROX. 6,200 X 1,000 MM 69 UPRIGHTS, APPROX. 7,000 X 1,000 MM 480 TRAVERSES APPROXIMATELY 2,900 X K140 MM 960 PINS 176 GROUND ANCHOR M 12 MM TECHNICAL DATA: FRAME ELEVATION 6,200-7.000 MM SHELF DEPTH 1000 MM LOAD RANGE 933 KG PAYLOAD FIELD 8,500 KG PAYLOAD SPECIALIST 2,800 KG FRAME BLUE BEAMS BLUE IN STOCK: 21698 HARSEFELD WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 11 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 11 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.550 €
Ubicación: Land-screw compressor  kaeser cs121 
screw exchange - 2014 
compressor after service

technical data:

capacity: 12,00 m3/min (12000l/min);
engine: 75 kw;
pressure: 8 bar;
year: 2000
working hours: 14745h  SCREW COMPRESSOR KAESER CS121 SCREW EXCHANGE - 2014 COMPRESSOR AFTER SERVICE TECHNICAL DATA: CAPACITY: 12,00 M3/MIN (12000L/MIN); ENGINE: 75 KW; PRESSURE: 8 BAR; YEAR: 2000 WORKING HOURS: 14745H
Vendedor: P.H.U. Airspaw
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 110 kg<br/>dimensions (l x w x h) approx.: 1000 x 900 x 1000 mm<br/>description: nordson mc 24 premelting unit<br> serial number lu06d03037<br> voltage 400 v<br> maximum pressure 16 bar<br> ce standards WEIGHT APPROX.: 110 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 900 X 1000 MM
DESCRIPTION: NORDSON MC 24 PREMELTING UNIT
SERIAL NUMBER LU06D03037
VOLTAGE 400 V
MAXIMUM PRESSURE 16 BAR
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.990 €
Ubicación: Land-table saw ortza se-150 t sliding table 1600 mm
schiebetischanschlag disassembled
with suva protection
saw blades up to 45 â° degree angle-adjustable
subsequently mounted special stop vintage 2003 bã¶sch bazenheid
total size: 1600 x 1250 mm x 1700 mm
weight approx. 770 kg
built in 1974

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        TABLE SAW ORTZA SE-150 T SLIDING TABLE 1600 MM SCHIEBETISCHANSCHLAG DISASSEMBLED WITH SUVA PROTECTION SAW BLADES UP TO 45 &ACIRC;&DEG; DEGREE ANGLE-ADJUSTABLE SUBSEQUENTLY MOUNTED SPECIAL STOP VINTAGE 2003 B&ATILDE;&PARA;SCH BAZENHEID TOTAL SIZE: 1600 X 1250 MM X 1700 MM WEIGHT APPROX. 770 KG BUILT IN 1974 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 11 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 11 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.490 €
Ubicación: Land-kehl machine / milling machine rex

with suva protection
machine wheels
length: 1100 mm, width 950 mm, height 1900 mm
weight approx. 580 kg
year of construction 1983

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        KEHL MACHINE / MILLING MACHINE REX WITH SUVA PROTECTION MACHINE WHEELS LENGTH: 1100 MM, WIDTH 950 MM, HEIGHT 1900 MM WEIGHT APPROX. 580 KG YEAR OF CONSTRUCTION 1983 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 11 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 11 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-5 linear axes 
2 linear axes 
2 axles c
bar loader iemca miniboss 325
year 2001
work oil
cnc fanuc
fixed rear machining 
passage headstock bar 20 mm 5 LINEAR AXES 2 LINEAR AXES 2 AXLES C BAR LOADER IEMCA MINIBOSS 325 YEAR 2001 WORK OIL CNC FANUC FIXED REAR MACHINING PASSAGE HEADSTOCK BAR 20 MM
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 9 kg<br/>dimensions (l x w x h) approx.: 800x400x400 mm<br/>description: 2 pieces, details see pictures WEIGHT APPROX.: 9 KG
DIMENSIONS (L X W X H) APPROX.: 800X400X400 MM
DESCRIPTION: 2 PIECES, DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HAN types: