1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-x way 1020 mm
y way 510 mm
z path 610 mm
control ultimax 4
surface 1020 x 610 mm
toolholder sk 40
tool change unit 24 x
speed 10.000 u / min
drive 15 kw
total power kw
weight approx. 6,5 t the machine
dimensions of the machine 3, 0 x 2, 4 x 2, 6 m
chip conveyor
high pressure coolant
electronic handwheel
internal coolant 20 bar

X WAY 1020 MM Y WAY 510 MM Z PATH 610 MM CONTROL ULTIMAX 4 SURFACE 1020 X 610 MM TOOLHOLDER SK 40 TOOL CHANGE UNIT 24 X SPEED 10.000 U / MIN DRIVE 15 KW TOTAL POWER KW WEIGHT APPROX. 6,5 T THE MACHINE DIMENSIONS OF THE MACHINE 3, 0 X 2, 4 X 2, 6 M CHIP CONVEYOR HIGH PRESSURE COOLANT ELECTRONIC HANDWHEEL INTERNAL COOLANT 20 BAR
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-automatic changing cylinderdistance,\r\ntable:  lenght  1100 mm, width 620 mm\r\nbelt  width  600 mm, AUTOMATIC CHANGING CYLINDERDISTANCE,\R\NTABLE: LENGHT 1100 MM, WIDTH 620 MM\R\NBELT WIDTH 600 MM,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 57.000 €
Ubicación: Land--four colours straight machine max size 37x52 cms.
-year 2001, only 28 mil. impressions
-komorimatic continuous alcohol dampening with aquapress refrigerated recirculation system with alcohol metering
-komori plate changer: semi-automatic plate changing
-pqc control system- control panel with touch screen built on delivery: ink zones, all registers and dampening remote controls, plate cocking
-rollers and blankets automatic washing devices , double size diameter of impression and transfer cylinders
-all chromed cylinders: plate, blanket and impression , non stop delivery
-powder sprayer, max speed 13.000 sh/hour
-stream feeder with low pile delivery , available immediately -FOUR COLOURS STRAIGHT MACHINE MAX SIZE 37X52 CMS. -YEAR 2001, ONLY 28 MIL. IMPRESSIONS -KOMORIMATIC CONTINUOUS ALCOHOL DAMPENING WITH AQUAPRESS REFRIGERATED RECIRCULATION SYSTEM WITH ALCOHOL METERING -KOMORI PLATE CHANGER: SEMI-AUTOMATIC PLATE CHANGING -PQC CONTROL SYSTEM- CONTROL PANEL WITH TOUCH SCREEN BUILT ON DELIVERY: INK ZONES, ALL REGISTERS AND DAMPENING REMOTE CONTROLS, PLATE COCKING -ROLLERS AND BLANKETS AUTOMATIC WASHING DEVICES , DOUBLE SIZE DIAMETER OF IMPRESSION AND TRANSFER CYLINDERS -ALL CHROMED CYLINDERS: PLATE, BLANKET AND IMPRESSION , NON STOP DELIVERY -POWDER SPRAYER, MAX SPEED 13.000 SH/HOUR -STREAM FEEDER WITH LOW PILE DELIVERY , AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-volume scaling, cap. max. 50 cycl/min.,(estimation)\r\nvolume scaling between 450 - 1350 ccm, (depends on the product)\r\ndepositing nozzles changeable,\r\ndiameter of the nozzle approx. 24 mm, hopper approx. 60 l\r\nmade from stainless steel, machine moveable\r\n VOLUME SCALING, CAP. MAX. 50 CYCL/MIN.,(ESTIMATION)\R\NVOLUME SCALING BETWEEN 450 - 1350 CCM, (DEPENDS ON THE PRODUCT)\R\NDEPOSITING NOZZLES CHANGEABLE,\R\NDIAMETER OF THE NOZZLE APPROX. 24 MM, HOPPER APPROX. 60 L\R\NMADE FROM STAINLESS STEEL, MACHINE MOVEABLE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand extrusion press line (not complete)
mfc.:	yoo chang, hyundayheavy ind., sunwoo eng.	built:	2001
force:	1800 mt 	billet dia.:	178 mm – 7”	length: 550 – 750 mm	
scope of supply:	log furnace		log shear	extrusion press	
hydraulic station	dies oven		stretcher
 QTY. 1 SECOND-HAND EXTRUSION PRESS LINE (NOT COMPLETE) MFC.: YOO CHANG, HYUNDAYHEAVY IND., SUNWOO ENG. BUILT: 2001 FORCE: 1800 MT BILLET DIA.: 178 MM – 7” LENGTH: 550 – 750 MM SCOPE OF SUPPLY: LOG FURNACE LOG SHEAR EXTRUSION PRESS HYDRAULIC STATION DIES OVEN STRETCHER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-variable speed\r\ncylinder diameter 2 pcs. 95 mm, grooved, length 620 mm\r\ntemplate with 2 holes d 25 mm, template changeable VARIABLE SPEED\R\NCYLINDER DIAMETER 2 PCS. 95 MM, GROOVED, LENGTH 620 MM\R\NTEMPLATE WITH 2 HOLES D 25 MM, TEMPLATE CHANGEABLE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-3000 x 1500 mm with pallet changer, byloader, updated monitor,
cooler, filter, 5 + 7, 5 cutting head, sick light barrier, on time 63973, cutting time 31200, turbo and glass revision at cutting time 22787 hours.
in really good condition, working in production, can be delivered august 2019, service made in march 2019 
 3000 X 1500 MM WITH PALLET CHANGER, BYLOADER, UPDATED MONITOR, COOLER, FILTER, 5 + 7, 5 CUTTING HEAD, SICK LIGHT BARRIER, ON TIME 63973, CUTTING TIME 31200, TURBO AND GLASS REVISION AT CUTTING TIME 22787 HOURS. IN REALLY GOOD CONDITION, WORKING IN PRODUCTION, CAN BE DELIVERED AUGUST 2019, SERVICE MADE IN MARCH 2019
Vendedor: K N Machinery
Año de construcción: usado
Ubicación: Land-<span style=color: #ff0000;><strong>only about 23000 working hours</strong></span>

<strong><span style=color: #ff0000;>z =426mm !!!</span></strong>

<strong>state: machine visible by client.
</strong>

x-axis travel (mm):500
x-axis travel (mm):350
x-axis travel (mm):426!!
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> ONLY ABOUT 23000 WORKING HOURS Z =426MM !!! STATE: MACHINE VISIBLE BY CLIENT. X-AXIS TRAVEL (MM):500 X-AXIS TRAVEL (MM):350 X-AXIS TRAVEL (MM):426!! WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-press brake manufacturer: trumpf
type: trumabend v 85
year of construction: 1997
control: delem da 65
hours of operation: 25.690 h

bending length: 2050 mm
pressing force: 85 to
stroke: 215 mm
usable height: 385 mm
free stã¤nderduchgang: 1750 mm
throat depth: 410 mm
y rapid speed: 200 mm / s
y operation: 1-11 mm/s
y-return: 135 mm / s
working height: 1050 mm
length: 2680 mm
width: 2100 mm
height: 2885 mm
weight: 9600 kg

robust machine frame as a welded construction in all-steel construction

pressure bar with high flexural strength

electro-hydraulic top drive proportional valves

modern block hydraulic

spherical suspension and angular position of the pressure bar

2-cylinder version y1 / y2

cnc back gauge with rack-pinion drive, for x - and r-axis

safe moving of the stop fingers from the front

self-centering upper sleeve

hardened substation stuff recording

2 piece stop fingers

plunger measuring system with on springback compensation via glass scale

tool change vertical

programmatic substation stuff shift (i axis) for 2 positions

protection cover

cnc crowning

2 quick adjustable support bracket, front

PRESS BRAKE MANUFACTURER: TRUMPF TYPE: TRUMABEND V 85 YEAR OF CONSTRUCTION: 1997 CONTROL: DELEM DA 65 HOURS OF OPERATION: 25.690 H BENDING LENGTH: 2050 MM PRESSING FORCE: 85 TO STROKE: 215 MM USABLE HEIGHT: 385 MM FREE ST&ATILDE;&CURREN;NDERDUCHGANG: 1750 MM THROAT DEPTH: 410 MM Y RAPID SPEED: 200 MM / S Y OPERATION: 1-11 MM/S Y-RETURN: 135 MM / S WORKING HEIGHT: 1050 MM LENGTH: 2680 MM WIDTH: 2100 MM HEIGHT: 2885 MM WEIGHT: 9600 KG ROBUST MACHINE FRAME AS A WELDED CONSTRUCTION IN ALL-STEEL CONSTRUCTION PRESSURE BAR WITH HIGH FLEXURAL STRENGTH ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES MODERN BLOCK HYDRAULIC SPHERICAL SUSPENSION AND ANGULAR POSITION OF THE PRESSURE BAR 2-CYLINDER VERSION Y1 / Y2 CNC BACK GAUGE WITH RACK-PINION DRIVE, FOR X - AND R-AXIS SAFE MOVING OF THE STOP FINGERS FROM THE FRONT SELF-CENTERING UPPER SLEEVE HARDENED SUBSTATION STUFF RECORDING 2 PIECE STOP FINGERS PLUNGER MEASURING SYSTEM WITH ON SPRINGBACK COMPENSATION VIA GLASS SCALE TOOL CHANGE VERTICAL PROGRAMMATIC SUBSTATION STUFF SHIFT (I AXIS) FOR 2 POSITIONS PROTECTION COVER CNC CROWNING 2 QUICK ADJUSTABLE SUPPORT BRACKET, FRONT
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 1700 kg<br/>dimensions (l x w x h) approx.: 3700 x 1700 x 2500 mm<br/>description: cnc boring machine<br> serial number al1 / 001406<br> working width from 70 mm to 900 mm<br> maximum panel length from 200 mm to 3000 mm<br> maximum thickness from 10 mm to 60 mm<br> universal group for interchangeable heads<br> 12 vertical drills<br> 4 hz-x<br> x-axis scoring group<br> ce standards<br> WEIGHT APPROX.: 1700 KG
DIMENSIONS (L X W X H) APPROX.: 3700 X 1700 X 2500 MM
DESCRIPTION: CNC BORING MACHINE
SERIAL NUMBER AL1 / 001406
WORKING WIDTH FROM 70 MM TO 900 MM
MAXIMUM PANEL LENGTH FROM 200 MM TO 3000 MM
MAXIMUM THICKNESS FROM 10 MM TO 60 MM
UNIVERSAL GROUP FOR INTERCHANGEABLE HEADS
12 VERTICAL DRILLS
4 HZ-X
X-AXIS SCORING GROUP
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-press brake
manufacturer: trumpf
type: trumabend v 85
year of construction: 2002
control: delem da 65
hours of operation: 30.702 h

bending length: 2050 mm
pressing force: 85 to
stroke: 215 mm
usable height: 385 mm
free stã¤nderduchgang: 1750 mm
throat depth: 410 mm
y rapid speed: 200 mm / s
y operation: 1-10 mm/s
y-return: 135 mm / s
working height: 1050 mm
length: 2680 mm
width: 2100 mm
height: 2375 mm
weight: 7900 kg

upper drive concept n two cylinder type y1 / y2
electro-hydraulic tappet drive via proportional valve technology
tappet position measuring system with on springback compensation via glass scale
modern block hydraulic
spherical suspension and angular position of the pressure bar
cnc rear stop system
safe finger adjustment from the front
2 piece stop fingers
self-centring, manually, hardened upper sleeve for vertical tool change
hardened, manual recording of substation stuff
programmatic substation stuff shift (i axis) for 2 positions
flat front cover
modern protective cover
ce mark
oil cooler
trailing stop system 4 axes (x, r, z1, z2)
top tool clamping hydraulically and hardened
substation stuff clamp hydraulic
cnc crowning
preparation acb angle measuring system
2 edition console
 PRESS BRAKE MANUFACTURER: TRUMPF TYPE: TRUMABEND V 85 YEAR OF CONSTRUCTION: 2002 CONTROL: DELEM DA 65 HOURS OF OPERATION: 30.702 H BENDING LENGTH: 2050 MM PRESSING FORCE: 85 TO STROKE: 215 MM USABLE HEIGHT: 385 MM FREE ST&ATILDE;&CURREN;NDERDUCHGANG: 1750 MM THROAT DEPTH: 410 MM Y RAPID SPEED: 200 MM / S Y OPERATION: 1-10 MM/S Y-RETURN: 135 MM / S WORKING HEIGHT: 1050 MM LENGTH: 2680 MM WIDTH: 2100 MM HEIGHT: 2375 MM WEIGHT: 7900 KG UPPER DRIVE CONCEPT N TWO CYLINDER TYPE Y1 / Y2 ELECTRO-HYDRAULIC TAPPET DRIVE VIA PROPORTIONAL VALVE TECHNOLOGY TAPPET POSITION MEASURING SYSTEM WITH ON SPRINGBACK COMPENSATION VIA GLASS SCALE MODERN BLOCK HYDRAULIC SPHERICAL SUSPENSION AND ANGULAR POSITION OF THE PRESSURE BAR CNC REAR STOP SYSTEM SAFE FINGER ADJUSTMENT FROM THE FRONT 2 PIECE STOP FINGERS SELF-CENTRING, MANUALLY, HARDENED UPPER SLEEVE FOR VERTICAL TOOL CHANGE HARDENED, MANUAL RECORDING OF SUBSTATION STUFF PROGRAMMATIC SUBSTATION STUFF SHIFT (I AXIS) FOR 2 POSITIONS FLAT FRONT COVER MODERN PROTECTIVE COVER CE MARK OIL COOLER TRAILING STOP SYSTEM 4 AXES (X, R, Z1, Z2) TOP TOOL CLAMPING HYDRAULICALLY AND HARDENED SUBSTATION STUFF CLAMP HYDRAULIC CNC CROWNING PREPARATION ACB ANGLE MEASURING SYSTEM 2 EDITION CONSOLE
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 12.000 €
Ubicación: Land-weight approx.: 7700 kg<br/>dimensions (l x w x h) approx.: 4000 x 4050 x 2450 mm<br/>description: force 30 ton, x-axis stroke -40/1550 m, y-axis stroke -40/1550 mm, max positioning speed x-axis 85 m/min, max positioning speed y-axis 60 m/min, positioning accuracy +/- 0.1 mm, maximum working diameter 100 mm, maximum working thickness 8 mm, maximum sheet weight 150 kg, tool change time 5 sec, c-axis rotation speed 50 rpm, c-axis precision 0.01 °, power 14 kw WEIGHT APPROX.: 7700 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 4050 X 2450 MM
DESCRIPTION: FORCE 30 TON, X-AXIS STROKE -40/1550 M, Y-AXIS STROKE -40/1550 MM, MAX POSITIONING SPEED X-AXIS 85 M/MIN, MAX POSITIONING SPEED Y-AXIS 60 M/MIN, POSITIONING ACCURACY +/- 0.1 MM, MAXIMUM WORKING DIAMETER 100 MM, MAXIMUM WORKING THICKNESS 8 MM, MAXIMUM SHEET WEIGHT 150 KG, TOOL CHANGE TIME 5 SEC, C-AXIS ROTATION SPEED 50 RPM, C-AXIS PRECISION 0.01 °, POWER 14 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-procedures: 1200 x 650 x 500 mm [x x y x z]
table size x 1600 mm
table size y: 1000 mm
maximum workpiece weight: 5000 kg
maximum electrode weight: 100 kg
electrode changer: 12 - fold
c-axis
work pool: 2100 x 1250 x 650 mm
quill arbor: erowa PROCEDURES: 1200 X 650 X 500 MM [X X Y X Z] TABLE SIZE X 1600 MM TABLE SIZE Y: 1000 MM MAXIMUM WORKPIECE WEIGHT: 5000 KG MAXIMUM ELECTRODE WEIGHT: 100 KG ELECTRODE CHANGER: 12 - FOLD C-AXIS WORK POOL: 2100 X 1250 X 650 MM QUILL ARBOR: EROWA
Vendedor: Mac-Tec
Año de construcción: usado
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 600 x 600 x 750 mm<br/>description: multi-function led display for monitoring filter status, prefilter access door for quick filter check / change, mouth suction, tce system, control panel - includes thermal switch and space for additional interface controls, power 0.55 kw WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 600 X 750 MM
DESCRIPTION: MULTI-FUNCTION LED DISPLAY FOR MONITORING FILTER STATUS, PREFILTER ACCESS DOOR FOR QUICK FILTER CHECK / CHANGE, MOUTH SUCTION, TCE SYSTEM, CONTROL PANEL - INCLUDES THERMAL SWITCH AND SPACE FOR ADDITIONAL INTERFACE CONTROLS, POWER 0.55 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mod. e130 cnc yasnac
quick 50 mt
axis travel x400 y300 z300
tool changing positions 12
light chuck
pallet's da 150-450
water through the chuck
2 pallet's 400x300
chuck 10000
attack
bt30
year of construction 2004 MOD. E130 CNC YASNAC QUICK 50 MT AXIS TRAVEL X400 Y300 Z300 TOOL CHANGING POSITIONS 12 LIGHT CHUCK PALLET'S DA 150-450 WATER THROUGH THE CHUCK 2 PALLET'S 400X300 CHUCK 10000 ATTACK BT30 YEAR OF CONSTRUCTION 2004
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 29.000 €
Ubicación: Land-weight approx.: 14000 kg<br/>x-travel: 2400 mm<br/>y-travel: 1200 mm<br/>z-travel: 1000 mm<br/>dimensions (l x w x h) approx.: 4500 x 2250 x 4000 mm<br/>description: brown & sharpe pmm-c coordinate measuring machine<br> <br> measuring software hexagon quindos 7 with v7.10.1363-r-7 license<br> <br> table dimensions lxb [in mm] 4100 x 1600 x 4000<br> pass [in mm] 1400 x 1600<br> measuring range: x= 2400 mm, y= 1200 mm, z= 1000 mm<br> allowed x-table load: 2000 kg<br> resolution: 0,05 micrometer<br> max. postioning speed: 400 mm/sec<br> max. acceleration: 3000 mm/sec²<br> <br> touch system:<br> touch frequency 30 points/min<br> max. scan speed 50 mm/sec<br> data rate up to 500 points/sec<br> touch force 0,01 bis 1,2 n, infinitely selectable<br> <br> measurement uncertainty iso 10 360-2:<br> volumetric measurement lenght uncertainty e: 1,8 + l/300 [micrometer]<br> volumetric touch uncertainty r: 1,5 [micrometer]<br> <br> electrical data:<br> operating voltage 208-500 v +/- 10%, 3 pe<br> frequency 50/60 hz<br> rated capacity 2,4 kva<br> average power consumption approx. 600 va inkl. host computer<br> protection of the machine t 16 a<br> <br> compressed air supply:<br> pressure ? 5,5 bar (? 6,5 bar for table load ? 1500 kg)<br> temperature 20 °c +/- 5°c<br> consumption 250 nl/m<br> <br> for futher technical data see pdf file<br> <br> scope of delivery:<br> - technical documentation incl. operating manual<br> - change racks<br> - 7 probe system incl. probes<br> - quindos 7 v7.10.1363-r-7 license<br> <br> the delivery does not include a pc or monitor<br> <br> the coordinate measuring machine will be dismantled and secured in the axis professionally from hexagon metrology gmbh<br> WEIGHT APPROX.: 14000 KG
X-TRAVEL: 2400 MM
Y-TRAVEL: 1200 MM
Z-TRAVEL: 1000 MM
DIMENSIONS (L X W X H) APPROX.: 4500 X 2250 X 4000 MM
DESCRIPTION: BROWN & SHARPE PMM-C COORDINATE MEASURING MACHINE

MEASURING SOFTWARE HEXAGON QUINDOS 7 WITH V7.10.1363-R-7 LICENSE

TABLE DIMENSIONS LXB [IN MM] 4100 X 1600 X 4000
PASS [IN MM] 1400 X 1600
MEASURING RANGE: X= 2400 MM, Y= 1200 MM, Z= 1000 MM
ALLOWED X-TABLE LOAD: 2000 KG
RESOLUTION: 0,05 MICROMETER
MAX. POSTIONING SPEED: 400 MM/SEC
MAX. ACCELERATION: 3000 MM/SEC²

TOUCH SYSTEM:
TOUCH FREQUENCY 30 POINTS/MIN
MAX. SCAN SPEED 50 MM/SEC
DATA RATE UP TO 500 POINTS/SEC
TOUCH FORCE 0,01 BIS 1,2 N, INFINITELY SELECTABLE

MEASUREMENT UNCERTAINTY ISO 10 360-2:
VOLUMETRIC MEASUREMENT LENGHT UNCERTAINTY E: 1,8 + L/300 [MICROMETER]
VOLUMETRIC TOUCH UNCERTAINTY R: 1,5 [MICROMETER]

ELECTRICAL DATA:
OPERATING VOLTAGE 208-500 V +/- 10%, 3 PE
FREQUENCY 50/60 HZ
RATED CAPACITY 2,4 KVA
AVERAGE POWER CONSUMPTION APPROX. 600 VA INKL. HOST COMPUTER
PROTECTION OF THE MACHINE T 16 A

COMPRESSED AIR SUPPLY:
PRESSURE ? 5,5 BAR (? 6,5 BAR FOR TABLE LOAD ? 1500 KG)
TEMPERATURE 20 °C +/- 5°C
CONSUMPTION 250 NL/M

FOR FUTHER TECHNICAL DATA SEE PDF FILE

SCOPE OF DELIVERY:
- TECHNICAL DOCUMENTATION INCL. OPERATING MANUAL
- CHANGE RACKS
- 7 PROBE SYSTEM INCL. PROBES
- QUINDOS 7 V7.10.1363-R-7 LICENSE

THE DELIVERY DOES NOT INCLUDE A PC OR MONITOR

THE COORDINATE MEASURING MACHINE WILL BE DISMANTLED AND SECURED IN THE AXIS PROFESSIONALLY FROM HEXAGON METROLOGY GMBH
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine was overhauled. two years ago, she got a new main spindle.

z axis should be checked in time.

technical data:

brand: kondia

type: cm

control: heidenhain tnc 410

bj: 1996

x traverse paths 650.0 mm
y travel 350.0 mm
z travel 380.0 mm
type 660.0 mm cnc range length
pallet width 350.0 mm
workpiece weight tool changer 18.0
bt40 spindle cone
spindle turning 6000 rpm

MACHINE WAS OVERHAULED. TWO YEARS AGO, SHE GOT A NEW MAIN SPINDLE. Z AXIS SHOULD BE CHECKED IN TIME. TECHNICAL DATA: BRAND: KONDIA TYPE: CM CONTROL: HEIDENHAIN TNC 410 BJ: 1996 X TRAVERSE PATHS 650.0 MM Y TRAVEL 350.0 MM Z TRAVEL 380.0 MM TYPE 660.0 MM CNC RANGE LENGTH PALLET WIDTH 350.0 MM WORKPIECE WEIGHT TOOL CHANGER 18.0 BT40 SPINDLE CONE SPINDLE TURNING 6000 RPM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: used machinery auction RESALE 8.600 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2300 mm<br/>description: spinner pd cnc lathe spinner pd cnc lathe swinging diameter 300 mm, travel x - 400 mm, z - 400 mm, rapid traverse 12 m / min, main spindle probably 32 mm, speed max. 8000 rpm, spindle nose diameter 100/110 mm, spindle passage 32 mm, pick-off, linear tool carrier without tools, tool changer with 16 tool stations, 8 of which are driven, tool holder vdi 16, max. speed of driven tools 6000 rpm, max. torque 23 nm, control fanuc machine number a1784<br> WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2300 MM
DESCRIPTION: SPINNER PD CNC LATHE SPINNER PD CNC LATHE SWINGING DIAMETER 300 MM, TRAVEL X - 400 MM, Z - 400 MM, RAPID TRAVERSE 12 M / MIN, MAIN SPINDLE PROBABLY 32 MM, SPEED MAX. 8000 RPM, SPINDLE NOSE DIAMETER 100/110 MM, SPINDLE PASSAGE 32 MM, PICK-OFF, LINEAR TOOL CARRIER WITHOUT TOOLS, TOOL CHANGER WITH 16 TOOL STATIONS, 8 OF WHICH ARE DRIVEN, TOOL HOLDER VDI 16, MAX. SPEED OF DRIVEN TOOLS 6000 RPM, MAX. TORQUE 23 NM, CONTROL FANUC MACHINE NUMBER A1784
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 900 €
Ubicación: Land-martin - rigid cutter type t 21, iron stand, milling 30 + 40 mm, circulating oil lubrication, 4 rpm 3000/4500/6000/9000 rpm, motor 5.5 kw - 380 volt, pole changing bar shaper fence with fine adjustment, very good condition, made in germany MARTIN - RIGID CUTTER TYPE T 21, IRON STAND, MILLING 30 + 40 MM, CIRCULATING OIL LUBRICATION, 4 RPM 3000/4500/6000/9000 RPM, MOTOR 5.5 KW - 380 VOLT, POLE CHANGING BAR SHAPER FENCE WITH FINE ADJUSTMENT, VERY GOOD CONDITION, MADE IN GERMANY
Vendedor: voelkel-hightech
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 4000 x 2000 mm<br />-loading height 540 mm<br />-bearing load max. 5,000 kg<br />-full rubber tires<br />-drawbar as interchangeable drawbar<br />-2 pieces car available<br />-prize piece<br />-external dimensions 3020/1250 / h540 mm<br />-eigen weight 1440 kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 4000 X 2000 MM
-LOADING HEIGHT 540 MM
-BEARING LOAD MAX. 5,000 KG
-FULL RUBBER TIRES
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-2 PIECES CAR AVAILABLE
-PRIZE PIECE
-EXTERNAL DIMENSIONS 3020/1250 / H540 MM
-EIGEN WEIGHT 1440 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 4.550 €
Ubicación: Land-screw compressor  kaeser cs121 
screw exchange - 2014 
compressor after service

technical data:

capacity: 12,00 m3/min (12000l/min);
engine: 75 kw;
pressure: 8 bar;
year: 2000
working hours: 14745h  SCREW COMPRESSOR KAESER CS121 SCREW EXCHANGE - 2014 COMPRESSOR AFTER SERVICE TECHNICAL DATA: CAPACITY: 12,00 M3/MIN (12000L/MIN); ENGINE: 75 KW; PRESSURE: 8 BAR; YEAR: 2000 WORKING HOURS: 14745H
Vendedor: P.H.U. Airspaw
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 4000 x 2000 mm<br />-loading height 650 mm<br />-bearing load max. 12,000 kg<br />-full rubber tires<br />-drawbar as interchangeable drawbar<br />-1 piece car available<br />-prize piece<br />-external dimensions 4680/2000 / h650 mm<br />-eigen weight 1440 kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 4000 X 2000 MM
-LOADING HEIGHT 650 MM
-BEARING LOAD MAX. 12,000 KG
-FULL RUBBER TIRES
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-1 PIECE CAR AVAILABLE
-PRIZE PIECE
-EXTERNAL DIMENSIONS 4680/2000 / H650 MM
-EIGEN WEIGHT 1440 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.990 €
Ubicación: Land-table saw ortza se-150 t sliding table 1600 mm
schiebetischanschlag disassembled
with suva protection
saw blades up to 45 â° degree angle-adjustable
subsequently mounted special stop vintage 2003 bã¶sch bazenheid
total size: 1600 x 1250 mm x 1700 mm
weight approx. 770 kg
built in 1974

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        TABLE SAW ORTZA SE-150 T SLIDING TABLE 1600 MM SCHIEBETISCHANSCHLAG DISASSEMBLED WITH SUVA PROTECTION SAW BLADES UP TO 45 &ACIRC;&DEG; DEGREE ANGLE-ADJUSTABLE SUBSEQUENTLY MOUNTED SPECIAL STOP VINTAGE 2003 B&ATILDE;&PARA;SCH BAZENHEID TOTAL SIZE: 1600 X 1250 MM X 1700 MM WEIGHT APPROX. 770 KG BUILT IN 1974 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 6200 x 2480 mm<br />-loading height 915 mm<br />-bearing load max. 50,000 kg<br />-full rubber tires 620/200-410 stb-mh20-a-robust<br />-drawbar as interchangeable drawbar<br />-1 piece car available<br />-prize piece<br />-outer dimensions 6800/2480 / h915 mm<br />-eigen weight kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 6200 X 2480 MM
-LOADING HEIGHT 915 MM
-BEARING LOAD MAX. 50,000 KG
-FULL RUBBER TIRES 620/200-410 STB-MH20-A-ROBUST
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-1 PIECE CAR AVAILABLE
-PRIZE PIECE
-OUTER DIMENSIONS 6800/2480 / H915 MM
-EIGEN WEIGHT KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.490 €
Ubicación: Land-kehl machine / milling machine rex

with suva protection
machine wheels
length: 1100 mm, width 950 mm, height 1900 mm
weight approx. 580 kg
year of construction 1983

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        KEHL MACHINE / MILLING MACHINE REX WITH SUVA PROTECTION MACHINE WHEELS LENGTH: 1100 MM, WIDTH 950 MM, HEIGHT 1900 MM WEIGHT APPROX. 580 KG YEAR OF CONSTRUCTION 1983 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-4 axis machining center<br/>usefull capacity: 3130 x 1250 mm. (divided in 2 fields)<br/>displacement in x: 3995 mm, y: 1976 mm, z1=343 mm z2=185 mm<br/>moving speed: x: 80 m/min, y: 80 m/min, z: 20 m/min<br/>6 supports with vacuum cups, pneumatic clamping<br/>vacuumpump 70 m3/h<br/>6 fences at the rear<br/>6 fences at the front<br/>2 fences left, 2 fences right<br/>1 connection for template<br/>4 rails for panel loading with pneumatic lifting<br/>laser positioning indicator for the vacuum cups<br/>configuration:<br/>main spindle with motor 9 kw, 1250-24000 r/min, air cooled, positioning axis over 360°, hsk63 taper<br/>extension c-axis for flex-5 aggregate<br/>8 position toolchanger moving with the machining unit in x<br/>8 position toolchanger positioned on the right<br/>6 vertical drills in x, 6 in y, 2 independant spindles<br/>6 horizontal drills<br/>grooving saw in x an y<br/>woodwop 7.0 programming software 4 AXIS MACHINING CENTER
USEFULL CAPACITY: 3130 X 1250 MM. (DIVIDED IN 2 FIELDS)
DISPLACEMENT IN X: 3995 MM, Y: 1976 MM, Z1=343 MM Z2=185 MM
MOVING SPEED: X: 80 M/MIN, Y: 80 M/MIN, Z: 20 M/MIN
6 SUPPORTS WITH VACUUM CUPS, PNEUMATIC CLAMPING
VACUUMPUMP 70 M3/H
6 FENCES AT THE REAR
6 FENCES AT THE FRONT
2 FENCES LEFT, 2 FENCES RIGHT
1 CONNECTION FOR TEMPLATE
4 RAILS FOR PANEL LOADING WITH PNEUMATIC LIFTING
LASER POSITIONING INDICATOR FOR THE VACUUM CUPS
CONFIGURATION:
MAIN SPINDLE WITH MOTOR 9 KW, 1250-24000 R/MIN, AIR COOLED, POSITIONING AXIS OVER 360°, HSK63 TAPER
EXTENSION C-AXIS FOR FLEX-5 AGGREGATE
8 POSITION TOOLCHANGER MOVING WITH THE MACHINING UNIT IN X
8 POSITION TOOLCHANGER POSITIONED ON THE RIGHT
6 VERTICAL DRILLS IN X, 6 IN Y, 2 INDEPENDANT SPINDLES
6 HORIZONTAL DRILLS
GROOVING SAW IN X AN Y
WOODWOP 7.0 PROGRAMMING SOFTWARE
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-2008
round Ø 5 to 8 mm
square from 5 to 55 mm
hexagonal from 5 to 65 mm
length of the workpiece from 210 to 1615 mm.
load material 250 kg
changing pieces 27 sec
feedrate 0-500 mm-sec
return speed 1400 mm-sec
6 bar of longitudinal displacement device
good conditions 2008 ROUND Ø 5 TO 8 MM SQUARE FROM 5 TO 55 MM HEXAGONAL FROM 5 TO 65 MM LENGTH OF THE WORKPIECE FROM 210 TO 1615 MM. LOAD MATERIAL 250 KG CHANGING PIECES 27 SEC FEEDRATE 0-500 MM-SEC RETURN SPEED 1400 MM-SEC 6 BAR OF LONGITUDINAL DISPLACEMENT DEVICE GOOD CONDITIONS
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-automatic window production line consisting of the following elements:<br/>- infeed table<br/>- cnc controlled milling machine bima 810f with tool changer 100 positions<br/>- transfer transport<br/>- two profiling machines<br/>- outfeed transport<br/><br/>workpiece dimensions (single processing)<br/>workpiece length: 300mm min, max 5500 mm<br/>workpiece thickness: min 51 mm, max 220 mm<br/>workpiece width: min 37 mm, max 140 mm<br/><br/>workpiece dimensions: (paired processing)<br/>workpiece length: 300mm min, max 5500 mm<br/>workpiece thickness: min 2 x 51 mm, max 2 x 110 mm<br/>workpiece width: min 37 mm, max 140 mm<br/><br/>capacity: 400 to 600 pcs / shift depending on the size and complexity<br/>full description on request AUTOMATIC WINDOW PRODUCTION LINE CONSISTING OF THE FOLLOWING ELEMENTS:
- INFEED TABLE
- CNC CONTROLLED MILLING MACHINE BIMA 810F WITH TOOL CHANGER 100 POSITIONS
- TRANSFER TRANSPORT
- TWO PROFILING MACHINES
- OUTFEED TRANSPORT

WORKPIECE DIMENSIONS (SINGLE PROCESSING)
WORKPIECE LENGTH: 300MM MIN, MAX 5500 MM
WORKPIECE THICKNESS: MIN 51 MM, MAX 220 MM
WORKPIECE WIDTH: MIN 37 MM, MAX 140 MM

WORKPIECE DIMENSIONS: (PAIRED PROCESSING)
WORKPIECE LENGTH: 300MM MIN, MAX 5500 MM
WORKPIECE THICKNESS: MIN 2 X 51 MM, MAX 2 X 110 MM
WORKPIECE WIDTH: MIN 37 MM, MAX 140 MM

CAPACITY: 400 TO 600 PCS / SHIFT DEPENDING ON THE SIZE AND COMPLEXITY
FULL DESCRIPTION ON REQUEST
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-universal milling machine deckel maho dmu 50 t control haidenhein mill-plus
spindle speeds 20-9000 rpm sk 40
traverse path x/y/z 500 mm x 400 mm x 400 mm
16 x tool changer
manual rotary table electr. handwheel,
infrared touch probe ts 631
machine stands with us in the camp under current vorfã¼hrbereit 
 
 UNIVERSAL MILLING MACHINE DECKEL MAHO DMU 50 T CONTROL HAIDENHEIN MILL-PLUS SPINDLE SPEEDS 20-9000 RPM SK 40 TRAVERSE PATH X/Y/Z 500 MM X 400 MM X 400 MM 16 X TOOL CHANGER MANUAL ROTARY TABLE ELECTR. HANDWHEEL, INFRARED TOUCH PROBE TS 631 MACHINE STANDS WITH US IN THE CAMP UNDER CURRENT VORF&ATILDE;&FRAC14;HRBEREIT
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-fixed side at the left<br/>feedspeed 18 - 25 m/min<br/>working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm<br/>panel overhang 30mm<br/>panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)<br/>coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm<br/>coil diameter 830 mm<br/>equipment:<br/>squaring device with 2 motors each 3 kw<br/>edge heating<br/>edge magazine for 2 coils, guillotine for edges up to 3 mm<br/>glueing part a20 with quickmelt application<br/>lateral pressure zone k, 1 driven and 2 after pressing rollers<br/>end trims hl84, 2 motors each 0,8kw <br/>rough trimming, 2 motors 1,5kw<br/>contour trimming, 2 exchange units<br/>profile scraping pn10<br/>flat scrapers fa11<br/>buffing<br/>automation package straight/chamfer:<br/>-automatic adjustment infeed fence<br/>-automatic setting of pressure rollers<br/>-pneumatic setting of end trims<br/>-pneumatic setting of rough trims<br/>-automatic setting of chamfer/radius on the contour trims<br/>-pneumatic setting of profile and flat scraping  units<br/>-electronic height positioning FIXED SIDE AT THE LEFT
FEEDSPEED 18 - 25 M/MIN
WORKING WIDTH MIN 60MM FOR PANEL THICKNESS 22MM, 105MM FOR PANEL THICKNESS 40MM
PANEL OVERHANG 30MM
PANEL THICKNESS 8 - 60 MM IN STEAD OF 12 - 40 MM (WITH LIMITATIONS)
COIL EDGE THICKNESS: 0,3 - 3 MM, STRIPS 0,4 - 20 MM
COIL DIAMETER 830 MM
EQUIPMENT:
SQUARING DEVICE WITH 2 MOTORS EACH 3 KW
EDGE HEATING
EDGE MAGAZINE FOR 2 COILS, GUILLOTINE FOR EDGES UP TO 3 MM
GLUEING PART A20 WITH QUICKMELT APPLICATION
LATERAL PRESSURE ZONE K, 1 DRIVEN AND 2 AFTER PRESSING ROLLERS
END TRIMS HL84, 2 MOTORS EACH 0,8KW
ROUGH TRIMMING, 2 MOTORS 1,5KW
CONTOUR TRIMMING, 2 EXCHANGE UNITS
PROFILE SCRAPING PN10
FLAT SCRAPERS FA11
BUFFING
AUTOMATION PACKAGE STRAIGHT/CHAMFER:
-AUTOMATIC ADJUSTMENT INFEED FENCE
-AUTOMATIC SETTING OF PRESSURE ROLLERS
-PNEUMATIC SETTING OF END TRIMS
-PNEUMATIC SETTING OF ROUGH TRIMS
-AUTOMATIC SETTING OF CHAMFER/RADIUS ON THE CONTOUR TRIMS
-PNEUMATIC SETTING OF PROFILE AND FLAT SCRAPING UNITS
-ELECTRONIC HEIGHT POSITIONING
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-1 5-axis baz dmg-mori
traverse path x/y/z 400 mm x 400 mm x 375 mm
control siemens sinumerik 840 d solution line with reading-mill
motor spindle sk 40 with 20 14 000 rpm
nc rotary table b-axis-5 â° up to + 110 â°
c axis 360 â°
chain magazine with 30 tool stations heat exchangers for spindle and table
infrared touch probe heidenhain ts 649
spã¤nnefã¶rderer, mode 4 electr. handwheel installed software for 3d quick set
 1 5-AXIS BAZ DMG-MORI TRAVERSE PATH X/Y/Z 400 MM X 400 MM X 375 MM CONTROL SIEMENS SINUMERIK 840 D SOLUTION LINE WITH READING-MILL MOTOR SPINDLE SK 40 WITH 20 14 000 RPM NC ROTARY TABLE B-AXIS-5 &ACIRC;&DEG; UP TO + 110 &ACIRC;&DEG; C AXIS 360 &ACIRC;&DEG; CHAIN MAGAZINE WITH 30 TOOL STATIONS HEAT EXCHANGERS FOR SPINDLE AND TABLE INFRARED TOUCH PROBE HEIDENHAIN TS 649 SP&ATILDE;&CURREN;NNEF&ATILDE;&PARA;RDERER, MODE 4 ELECTR. HANDWHEEL INSTALLED SOFTWARE FOR 3D QUICK SET
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-4-axis cnc machine<br/>table capacity: x 4500, y 1250, z 185 mm. <br/>axis stroke:  x 4830, y 1785, z 250 mm.<br/>axis speed: x 70, y 60, z 12 m/min.<br/>equipment:<br/>8 support rails with vacuum cups<br/>1 router, 7,5 kw motor, hsk f63, c-axis <br/>toolchanger with 10 positions <br/>toolchanger with 12 positions<br/>1 horizontal router , 5,5 kw motor<br/>17 vertical spindles<br/>ohrizontal spindles 6 in x direction, 2 in y direction<br/>1 x/y grooving saw  <br/>vacuum pump 100 m3/h 4-AXIS CNC MACHINE
TABLE CAPACITY: X 4500, Y 1250, Z 185 MM.
AXIS STROKE: X 4830, Y 1785, Z 250 MM.
AXIS SPEED: X 70, Y 60, Z 12 M/MIN.
EQUIPMENT:
8 SUPPORT RAILS WITH VACUUM CUPS
1 ROUTER, 7,5 KW MOTOR, HSK F63, C-AXIS
TOOLCHANGER WITH 10 POSITIONS
TOOLCHANGER WITH 12 POSITIONS
1 HORIZONTAL ROUTER , 5,5 KW MOTOR
17 VERTICAL SPINDLES
OHRIZONTAL SPINDLES 6 IN X DIRECTION, 2 IN Y DIRECTION
1 X/Y GROOVING SAW
VACUUM PUMP 100 M3/H
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-machine is geometric in a mint condition
   overhauled
traverse path x/y/z 500 mm x 450 mm x 400 mm
control heidenhain itnc 530
nc rotary table spindle retainer hsk 50e 42 000 rpm
tool changer with 30 seats
electr. handwheel
laser tool measurement in the workroom blum infrared probe mode 4
kã¼hlagregat for spindle cabinet kã¼hlagreggat
machine is in a mint condition geometric
new linear guides in x/y/z axes new kgt incl bearing in z/y new milling spindle (dmg)
all parts original dmg
incl. ca 60 tool holder hsk 50 e
 MACHINE IS GEOMETRIC IN A MINT CONDITION OVERHAULED TRAVERSE PATH X/Y/Z 500 MM X 450 MM X 400 MM CONTROL HEIDENHAIN ITNC 530 NC ROTARY TABLE SPINDLE RETAINER HSK 50E 42 000 RPM TOOL CHANGER WITH 30 SEATS ELECTR. HANDWHEEL LASER TOOL MEASUREMENT IN THE WORKROOM BLUM INFRARED PROBE MODE 4 K&ATILDE;&FRAC14;HLAGREGAT FOR SPINDLE CABINET K&ATILDE;&FRAC14;HLAGREGGAT MACHINE IS IN A MINT CONDITION GEOMETRIC NEW LINEAR GUIDES IN X/Y/Z AXES NEW KGT INCL BEARING IN Z/Y NEW MILLING SPINDLE (DMG) ALL PARTS ORIGINAL DMG INCL. CA 60 TOOL HOLDER HSK 50 E
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-edges up to 3 mm from coil, 6 mm strips<br/>workpiece width min:<br/>when workpiece thickness 12-22mm 70 mm*<br/>when workpiece thickness23-40 mm, 120 mm*<br/>when workpiece thicknesse 41-60mm 150 mm*<br/>*in relation to workpiece length<br/>feed speed 11 m/min<br/>equipment:<br/>pre-milling 2 x 2,2 kw <br/>pre-heating of panel edge<br/>glue aggregate a6<br/>coil edge magazine<br/>pressure zone, central positioning<br/>end trims, chamfer 15°/straight,  2 x 0,18 kw, 12.000 rpm, electro-pneumatic setting central control<br/>top & bottom trimmng, 2 x 0,27 kw, automatic adjustment when switching from straight to angle<br/>corner rounding unit 1 x 0,35 kw, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece length: 250 mm.<br/>profile scraping unit, quick toolchange, edge thickness: max. 3 mm, electro-pneumatic setting by central control<br/>glue scraping unit<br/>buffing, 2 x 0,09 kw<br/>electronic easy control ec 10+<br/>installed options:<br/>-tooling r= 2 mm<br/>-automatic infeed of the edges kdx1210 (fast exchange of coil edges)<br/>-contour trims 4802 with vertical action doing shelves<br/>-multiple tracing on the top/bottom trims (in case of angled workpieces or drilled workpieces)<br/>-special tracing on the profile scrapers EDGES UP TO 3 MM FROM COIL, 6 MM STRIPS
WORKPIECE WIDTH MIN:
WHEN WORKPIECE THICKNESS 12-22MM 70 MM*
WHEN WORKPIECE THICKNESS23-40 MM, 120 MM*
WHEN WORKPIECE THICKNESSE 41-60MM 150 MM*
*IN RELATION TO WORKPIECE LENGTH
FEED SPEED 11 M/MIN
EQUIPMENT:
PRE-MILLING 2 X 2,2 KW
PRE-HEATING OF PANEL EDGE
GLUE AGGREGATE A6
COIL EDGE MAGAZINE
PRESSURE ZONE, CENTRAL POSITIONING
END TRIMS, CHAMFER 15°/STRAIGHT, 2 X 0,18 KW, 12.000 RPM, ELECTRO-PNEUMATIC SETTING CENTRAL CONTROL
TOP & BOTTOM TRIMMNG, 2 X 0,27 KW, AUTOMATIC ADJUSTMENT WHEN SWITCHING FROM STRAIGHT TO ANGLE
CORNER ROUNDING UNIT 1 X 0,35 KW, 12000 RPM, MAX. 3 MM EDGE THICKNESS, WORKPIECE THISCKNESS: MAX. 40 MM, FEEDSPEED 11 M/MIN., MIN WORKPIECE LENGTH: 250 MM.
PROFILE SCRAPING UNIT, QUICK TOOLCHANGE, EDGE THICKNESS: MAX. 3 MM, ELECTRO-PNEUMATIC SETTING BY CENTRAL CONTROL
GLUE SCRAPING UNIT
BUFFING, 2 X 0,09 KW
ELECTRONIC EASY CONTROL EC 10+
INSTALLED OPTIONS:
-TOOLING R= 2 MM
-AUTOMATIC INFEED OF THE EDGES KDX1210 (FAST EXCHANGE OF COIL EDGES)
-CONTOUR TRIMS 4802 WITH VERTICAL ACTION DOING SHELVES
-MULTIPLE TRACING ON THE TOP/BOTTOM TRIMS (IN CASE OF ANGLED WORKPIECES OR DRILLED WORKPIECES)
-SPECIAL TRACING ON THE PROFILE SCRAPERS
Vendedor: Vebim
Año de construcción: usado
Precio: 5.900 €
Ubicación: Land-- control: contour 3 
- travel range: x= 560, y= 500, z= 450 mm 
- table size: 900 x 520 mm 
- spindle speed: 20-5000 u/min 
- tool changer defect 
- front doors missing 
weight ca. 4.500 kg - CONTROL: CONTOUR 3 - TRAVEL RANGE: X= 560, Y= 500, Z= 450 MM - TABLE SIZE: 900 X 520 MM - SPINDLE SPEED: 20-5000 U/MIN - TOOL CHANGER DEFECT - FRONT DOORS MISSING WEIGHT CA. 4.500 KG
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-panel thickness: 12 - 60 mm<br/>feed speed: 18 - 24 m/min<br/>edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood<br/><br/>equipment: <br/>help carriage feeding the panels rectangular<br/>automatic fence at the infeed<br/>squaring device: 2 x 3,0 kw<br/>panel edge pre-heater<br/>hot melt unit: qa34 / a20 <br/>edge magazine <br/>lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers<br/>end trims hl83, programmable change straight/chamfer, 2 motors 0,5 kw<br/>rough trimming: 2 x 1,5 kw<br/>top/bottom fine trimming, tilting, 2 x 0,4 kw<br/>contour trimming fk 13, 2 x 0,4 kw, with 8-fold toolchangers<br/>universal milling motor 4kw <br/>profile scrapers<br/>flat scrapers<br/>buffing unit with oscillation<br/>controlls: homatic nc16 PANEL THICKNESS: 12 - 60 MM
FEED SPEED: 18 - 24 M/MIN
EDGE THICKNESS: 0,4 - 3 MM FOR COIL EDGES, 0,4 - 20 MM FOR STRIPS / SOLID WOOD

EQUIPMENT:
HELP CARRIAGE FEEDING THE PANELS RECTANGULAR
AUTOMATIC FENCE AT THE INFEED
SQUARING DEVICE: 2 X 3,0 KW
PANEL EDGE PRE-HEATER
HOT MELT UNIT: QA34 / A20
EDGE MAGAZINE
LATERAL PRESSURE ROLLERS, THICKNESS PROGRAMMABLE, 1 DRIVEN, 6 NON-DRIVEN ROLLERS
END TRIMS HL83, PROGRAMMABLE CHANGE STRAIGHT/CHAMFER, 2 MOTORS 0,5 KW
ROUGH TRIMMING: 2 X 1,5 KW
TOP/BOTTOM FINE TRIMMING, TILTING, 2 X 0,4 KW
CONTOUR TRIMMING FK 13, 2 X 0,4 KW, WITH 8-FOLD TOOLCHANGERS
UNIVERSAL MILLING MOTOR 4KW
PROFILE SCRAPERS
FLAT SCRAPERS
BUFFING UNIT WITH OSCILLATION
CONTROLLS: HOMATIC NC16
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-hurricane painting booth mod. kg-top-320 - rotation / bj. 2014 / 10,600 x 5700 x 3600 / rotary heat exchanger to the air - heating / cnc siemens - simatic / ceiling filter and floor grilles / hitzregister / air - supply 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at

hurricane spray booth model kg-top 320 - rotation / year 2014 / 10,600 x 5,700 x 3,600 / rotary heat exchanger supply for air - heating / / cnc siemens - simatic / ceiling filter and floor grid / heat register / exhaust air - supply air 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at
 HURRICANE PAINTING BOOTH MOD. KG-TOP-320 - ROTATION / BJ. 2014 / 10,600 X 5700 X 3600 / ROTARY HEAT EXCHANGER TO THE AIR - HEATING / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRILLES / HITZREGISTER / AIR - SUPPLY 30,000 M&ACIRC;&SUP3; H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT HURRICANE SPRAY BOOTH MODEL KG-TOP 320 - ROTATION / YEAR 2014 / 10,600 X 5,700 X 3,600 / ROTARY HEAT EXCHANGER SUPPLY FOR AIR - HEATING / / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRID / HEAT REGISTER / EXHAUST AIR - SUPPLY AIR 30,000 M&ACIRC;&SUP3; H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-edgebanding line consisting of the following elements:<br/>- infeed table profi tb 10/15/20<br/>- single-sided edgebander profi kr10/16/qa<br/>- return conveyor profi zhr10/s<br/><br/>workpiece dimensions (limited by infeed table):<br/>workpiece thickness: 12-60 mm<br/>length min. 250 mm, max 250 mm<br/>width: min. 220 mm, max 1200 mm <br/><br/>workpiece dimensions for edge bander with manual handling:<br/>length min 250 mm, max 4200 mm<br/>width min 55 mm (long side), max 1200 mm<br/><br/>equipment profi kr10/16/qa<br/>- feeding system si14 for length- and crossfeed of the panels<br/>- formatting on portal left of machine, 4 kw motor, max 1300 mm<br/>- spraying station release agent<br/>- pre-milling 2 x 4,5 kw<br/>- a34 gluing station<br/>- magazine a3 for 6 coils and strips<br/>- pressure zone c with 1-driven and 6 idle rollers<br/>- workpiece preheating<br/>- end trims wk 13, 2 motors each 0,8kw <br/>- rough trimming 2 x 0,55 kw<br/>- contour trimming fk11 automatically chamfer / radius with kombitool<br/>- scraping unit pn20 pneumatic adjustment<br/>- finish unit fa11, consisting of:<br/>  glue scrapers<br/>  sprayer cleaning agent<br/>  buffing<br/>controlls pc21<br/>option to change machine programm between 2 panels EDGEBANDING LINE CONSISTING OF THE FOLLOWING ELEMENTS:
- INFEED TABLE PROFI TB 10/15/20
- SINGLE-SIDED EDGEBANDER PROFI KR10/16/QA
- RETURN CONVEYOR PROFI ZHR10/S

WORKPIECE DIMENSIONS (LIMITED BY INFEED TABLE):
WORKPIECE THICKNESS: 12-60 MM
LENGTH MIN. 250 MM, MAX 250 MM
WIDTH: MIN. 220 MM, MAX 1200 MM

WORKPIECE DIMENSIONS FOR EDGE BANDER WITH MANUAL HANDLING:
LENGTH MIN 250 MM, MAX 4200 MM
WIDTH MIN 55 MM (LONG SIDE), MAX 1200 MM

EQUIPMENT PROFI KR10/16/QA
- FEEDING SYSTEM SI14 FOR LENGTH- AND CROSSFEED OF THE PANELS
- FORMATTING ON PORTAL LEFT OF MACHINE, 4 KW MOTOR, MAX 1300 MM
- SPRAYING STATION RELEASE AGENT
- PRE-MILLING 2 X 4,5 KW
- A34 GLUING STATION
- MAGAZINE A3 FOR 6 COILS AND STRIPS
- PRESSURE ZONE C WITH 1-DRIVEN AND 6 IDLE ROLLERS
- WORKPIECE PREHEATING
- END TRIMS WK 13, 2 MOTORS EACH 0,8KW
- ROUGH TRIMMING 2 X 0,55 KW
- CONTOUR TRIMMING FK11 AUTOMATICALLY CHAMFER / RADIUS WITH KOMBITOOL
- SCRAPING UNIT PN20 PNEUMATIC ADJUSTMENT
- FINISH UNIT FA11, CONSISTING OF:
GLUE SCRAPERS
SPRAYER CLEANING AGENT
BUFFING
CONTROLLS PC21
OPTION TO CHANGE MACHINE PROGRAMM BETWEEN 2 PANELS
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-hurricane painting booth mod. kg-top-320 - rotation / bj. 2014 / 10,600 x 5700 x 3600 / rotary heat exchanger to the air - heating / cnc siemens - simatic / ceiling filter and floor grilles / hitzregister / air - supply 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at

hurricane spray booth model kg-top 320 - rotation / year 2014 / 10,600 x 5,700 x 3,600 / rotary heat exchanger supply for air - heating / / cnc siemens - simatic / ceiling filter and floor grid / heat register / exhaust air - supply air 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at
 HURRICANE PAINTING BOOTH MOD. KG-TOP-320 - ROTATION / BJ. 2014 / 10,600 X 5700 X 3600 / ROTARY HEAT EXCHANGER TO THE AIR - HEATING / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRILLES / HITZREGISTER / AIR - SUPPLY 30,000 M&ACIRC;&SUP3; H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT HURRICANE SPRAY BOOTH MODEL KG-TOP 320 - ROTATION / YEAR 2014 / 10,600 X 5,700 X 3,600 / ROTARY HEAT EXCHANGER SUPPLY FOR AIR - HEATING / / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRID / HEAT REGISTER / EXHAUST AIR - SUPPLY AIR 30,000 M&ACIRC;&SUP3; H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-worckpiece thickness: 8-50 mm <br/>edge thickness: coils 0,4-3 (max. 3 x 45 / 1 x 55) mm<br/>feeding speed: 9 m/min. <br/>power installed: 4 kw  <br/>equipment:<br/>bfs control<br/>high-frequency trimming motors <br/>large coil table (800mm diameter) to accommodate 3mm pvc coils <br/>hot-melt granulate glue application system <br/>double-motor end trim unit for precision trimming with tilt range from 0 - 15 degrees, 2 x 0,18 kw <br/>fine trimming unit equipped with digital counter for easy changeover, 2 x 0,27 kw <br/>profile scraping for pvc WORCKPIECE THICKNESS: 8-50 MM
EDGE THICKNESS: COILS 0,4-3 (MAX. 3 X 45 / 1 X 55) MM
FEEDING SPEED: 9 M/MIN.
POWER INSTALLED: 4 KW
EQUIPMENT:
BFS CONTROL
HIGH-FREQUENCY TRIMMING MOTORS
LARGE COIL TABLE (800MM DIAMETER) TO ACCOMMODATE 3MM PVC COILS
HOT-MELT GRANULATE GLUE APPLICATION SYSTEM
DOUBLE-MOTOR END TRIM UNIT FOR PRECISION TRIMMING WITH TILT RANGE FROM 0 - 15 DEGREES, 2 X 0,18 KW
FINE TRIMMING UNIT EQUIPPED WITH DIGITAL COUNTER FOR EASY CHANGEOVER, 2 X 0,27 KW
PROFILE SCRAPING FOR PVC
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-technical data:

brand: micron

type: ume 710

control: heidenhain tnc 360

table: 1200 x 600 mm
procedures:
x: 710 mm
y: 630 mm
w: 500 mm

tool changers: 22 x

year: 1997

rest: see data sheet. TECHNICAL DATA: BRAND: MICRON TYPE: UME 710 CONTROL: HEIDENHAIN TNC 360 TABLE: 1200 X 600 MM PROCEDURES: X: 710 MM Y: 630 MM W: 500 MM TOOL CHANGERS: 22 X YEAR: 1997 REST: SEE DATA SHEET.
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land- 

<span style=color: #ff0000;><b>nice machine coming from swiss watch industry</b></span>

 

 

x-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> &NBSP; NICE MACHINE COMING FROM SWISS WATCH INDUSTRY &NBSP; &NBSP; X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-travel axes: 550 x 850 x 450 mm [ x x y x z ]
table size x: 760 mm
table size y: 1000 mm
electrode changer: 20 - time
c-axis
pinole chuck erowa its 100
control multipulse 64 bit with problackbox
work tank: : 800 x 1100 x 480 mm TRAVEL AXES: 550 X 850 X 450 MM [ X X Y X Z ] TABLE SIZE X: 760 MM TABLE SIZE Y: 1000 MM ELECTRODE CHANGER: 20 - TIME C-AXIS PINOLE CHUCK EROWA ITS 100 CONTROL MULTIPULSE 64 BIT WITH PROBLACKBOX WORK TANK: : 800 X 1100 X 480 MM
Vendedor: Mac-Tec
Año de construcción: usado
Ubicación: Land-x travel:   1020 mm<br/>y travel:    560 mm<br/>z travel:    400 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- x-axis travel:   1020 mm<br/>- y-axis travel:    560 mm<br/>- z-axis travel:    400 mm<br/>- distance spindle nose - table surface (max.):    550 mm<br/>table:  <br/>- table surface (left-right):   1200 mm<br/>- table surface (front-back):    660 mm<br/>- workpiece load (max):    600 kg<br/>milling spindle / head:  <br/>- spindle revolutions (max):  20000 /min<br/>- tool fixture: iso bt 40:        <br/>axis drives:  <br/>- traverse velocity x (min):      1 mm/min<br/>- traverse velocity x (max):  10000 mm/min<br/>- traverse velocity y (min):      1 mm/min<br/>- traverse velocity y (max):  10000 mm/min<br/>- rapid traverse x:  25000 mm/min<br/>- rapid traverse y:  25000 mm/min<br/>- rapid traverse z:  25000 mm/min<br/>tool magazine:  <br/>- number of positions:     20  <br/>- tool diameter max.:     80 mm<br/>- - with free neighbour positions:    130 mm<br/>- tool length max.:    300 mm<br/>- tool weight max.:      8 kg<br/>- tool changing time:    1.8 s<br/>electrical specifications:  <br/>- mains power supply:     41 kva<br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/><br/><br/><br/><br/> X TRAVEL: 1020 MM
Y TRAVEL: 560 MM
Z TRAVEL: 400 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 1020 MM
- Y-AXIS TRAVEL: 560 MM
- Z-AXIS TRAVEL: 400 MM
- DISTANCE SPINDLE NOSE - TABLE SURFACE (MAX.): 550 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1200 MM
- TABLE SURFACE (FRONT-BACK): 660 MM
- WORKPIECE LOAD (MAX): 600 KG
MILLING SPINDLE / HEAD:
- SPINDLE REVOLUTIONS (MAX): 20000 /MIN
- TOOL FIXTURE: ISO BT 40:
AXIS DRIVES:
- TRAVERSE VELOCITY X (MIN): 1 MM/MIN
- TRAVERSE VELOCITY X (MAX): 10000 MM/MIN
- TRAVERSE VELOCITY Y (MIN): 1 MM/MIN
- TRAVERSE VELOCITY Y (MAX): 10000 MM/MIN
- RAPID TRAVERSE X: 25000 MM/MIN
- RAPID TRAVERSE Y: 25000 MM/MIN
- RAPID TRAVERSE Z: 25000 MM/MIN
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 20
- TOOL DIAMETER MAX.: 80 MM
- - WITH FREE NEIGHBOUR POSITIONS: 130 MM
- TOOL LENGTH MAX.: 300 MM
- TOOL WEIGHT MAX.: 8 KG
- TOOL CHANGING TIME: 1.8 S
ELECTRICAL SPECIFICATIONS:
- MAINS POWER SUPPLY: 41 KVA
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-adjustable crimper height.
adjustable infeed position.
quick change infeed pushers.
variable speed control.
handwheel adjustment cut off length via speed variator

used, in good working condition ADJUSTABLE CRIMPER HEIGHT. ADJUSTABLE INFEED POSITION. QUICK CHANGE INFEED PUSHERS. VARIABLE SPEED CONTROL. HANDWHEEL ADJUSTMENT CUT OFF LENGTH VIA SPEED VARIATOR USED, IN GOOD WORKING CONDITION
Vendedor: Rovita
Año de construcción: usado
Ubicación: Land-x-travel: 1.000 mm<br/>y-travel: 500 mm<br/>z-travel: 700 mm<br/>control: cnc 432 <br/>main spindle::  <br/>turning speed range - main spindle: 20 - 3.200 min/-1<br/>power capacity - main spindel: - kw<br/>tool taper: sk 50 <br/>quill stroke: 100 mm<br/>nc-rotary table::  <br/>table diameter: 920 mm<br/>b - axis: 0,001 °<br/>max. table load: ca. 600 kg<br/>feeds::  <br/>feed speeds: 1 - 3.000 mm/min<br/>rapid traverse ( x / y / z ): 6 / 5 / 6 m/min<br/>tool-presetter::  <br/>number of toolpositions: 24 pos.<br/>tool taper: sk 50 <br/>max. tool diameter: 125 / 160 mm<br/>max. tool length: 400 mm<br/>max. tool weight: 12,0 kg<br/>total power requirement: 27 kva<br/>weight of the machine ca.: 7,3 t<br/>dimensions of the machine ca.: 5,0 x 4,0 x 2,5 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>nc-rotary table:  <br/>hydraulic system:  <br/>div. tool holder:  <br/>automatic tool changer:  <br/>tool setting:  <br/>test probe:  <br/>cnc-universal-tool-room-milling- and boringmachine<br/>maho - mh 1000 e   <br/><br/>- 4 axis<br/>- nc-rotary-table<br/><br/><br/><br/><br/> X-TRAVEL: 1.000 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 700 MM
CONTROL: CNC 432
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 20 - 3.200 MIN/-1
POWER CAPACITY - MAIN SPINDEL: - KW
TOOL TAPER: SK 50
QUILL STROKE: 100 MM
NC-ROTARY TABLE::
TABLE DIAMETER: 920 MM
B - AXIS: 0,001 °
MAX. TABLE LOAD: CA. 600 KG
FEEDS::
FEED SPEEDS: 1 - 3.000 MM/MIN
RAPID TRAVERSE ( X / Y / Z ): 6 / 5 / 6 M/MIN
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 24 POS.
TOOL TAPER: SK 50
MAX. TOOL DIAMETER: 125 / 160 MM
MAX. TOOL LENGTH: 400 MM
MAX. TOOL WEIGHT: 12,0 KG
TOTAL POWER REQUIREMENT: 27 KVA
WEIGHT OF THE MACHINE CA.: 7,3 T
DIMENSIONS OF THE MACHINE CA.: 5,0 X 4,0 X 2,5 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
NC-ROTARY TABLE:
HYDRAULIC SYSTEM:
DIV. TOOL HOLDER:
AUTOMATIC TOOL CHANGER:
TOOL SETTING:
TEST PROBE:
CNC-UNIVERSAL-TOOL-ROOM-MILLING- AND BORINGMACHINE
MAHO - MH 1000 E

- 4 AXIS
- NC-ROTARY-TABLE




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-p94 - used approx. 6.6 m³ / 6,600 litres polypropylene tank, pp-tank, standing upright, roofless, open storage tank with flat bottom, in good condition. 

technical details: 
capacity: approx. 6.6 m³ / 6,600 litres 
material: pp-tank, polypropylene tank 
dimensions: Ø approx. 1.90 m   x   height = approx. 2.50 m 

used storage container in good condition. vertically standing tank with a flat bottom, 2 large flanges, as pictured without a roof and open top. the flanges can be changed or shut upon request. 

this container can be used as a storage tank for liquid feed, water, whey and many different media. 

price upon request. 

transport can be arranged at low cost. also we can modify the tank to suit your demands, just ask us. 

it is not possible to update all our advertisements daily. since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. please give us a call or write, so that we can advise you personally. 

more information and offers on our site: 
profi-tanks(dot)de P94 - USED APPROX. 6.6 M³ / 6,600 LITRES POLYPROPYLENE TANK, PP-TANK, STANDING UPRIGHT, ROOFLESS, OPEN STORAGE TANK WITH FLAT BOTTOM, IN GOOD CONDITION. TECHNICAL DETAILS: CAPACITY: APPROX. 6.6 M³ / 6,600 LITRES MATERIAL: PP-TANK, POLYPROPYLENE TANK DIMENSIONS: Ø APPROX. 1.90 M X HEIGHT = APPROX. 2.50 M USED STORAGE CONTAINER IN GOOD CONDITION. VERTICALLY STANDING TANK WITH A FLAT BOTTOM, 2 LARGE FLANGES, AS PICTURED WITHOUT A ROOF AND OPEN TOP. THE FLANGES CAN BE CHANGED OR SHUT UPON REQUEST. THIS CONTAINER CAN BE USED AS A STORAGE TANK FOR LIQUID FEED, WATER, WHEY AND MANY DIFFERENT MEDIA. PRICE UPON REQUEST. TRANSPORT CAN BE ARRANGED AT LOW COST. ALSO WE CAN MODIFY THE TANK TO SUIT YOUR DEMANDS, JUST ASK US. IT IS NOT POSSIBLE TO UPDATE ALL OUR ADVERTISEMENTS DAILY. SINCE OUR INVENTORY IS CHANGING CONTINUOUSLY, IT MAY BE THAT THIS TANK HAS ALREADY BEEN SOLD BUT A SIMILAR ONE IS IN STOCK. PLEASE GIVE US A CALL OR WRITE, SO THAT WE CAN ADVISE YOU PERSONALLY. MORE INFORMATION AND OFFERS ON OUR SITE: PROFI-TANKS(DOT)DE
Vendedor: Profihandels GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 5.800 €
Ubicación: Land-dimensions (l x w x h) approx.: 3500 x 3400 x 5800 mm<br/>description: serial number 31542/03, hanging height max. 2000 mm, hook load max. 2000 kg, with 4 shot blasting wheels, drive power 7.5 kw, opening of the cabin approx. 2000 x 2500 mm, control siemens, operating hours according to counter 13080, self disassembly is possible DIMENSIONS (L X W X H) APPROX.: 3500 X 3400 X 5800 MM
DESCRIPTION: SERIAL NUMBER 31542/03, HANGING HEIGHT MAX. 2000 MM, HOOK LOAD MAX. 2000 KG, WITH 4 SHOT BLASTING WHEELS, DRIVE POWER 7.5 KW, OPENING OF THE CABIN APPROX. 2000 X 2500 MM, CONTROL SIEMENS, OPERATING HOURS ACCORDING TO COUNTER 13080, SELF DISASSEMBLY IS POSSIBLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-5-axis machining center-
fehlmann picomax 825 with erowa pallet automation

control: heidenhein itnc530
year of construction: 2010

procedures/swing areas:
x-axis: 820mm
y-axis: 700mm
z-axis: 450mm
a-axis: 230â° (view compactset 115 â° +/-)
c-axis: 360â° (round table)

rapid traverse:
30 000 mm (linear axes)

spindle speed range: 50-20,000 1/min
interface: hsk63
power: 24kw
torque: 120nm

tool changer:
80 positions (pickup)

facilities: erowa robot easy automation with 10 pallets for workpieces up to 310 x 310 x 300 mm 80 bar ikz 1050 l coolant tank (coolant pressure above m features adjustable)

renishaw omp 40-2 probe

laser tool measurement for d0, 3-80 mm

direct path measurement systems for all axes (xyzac)

actively cooled shaft drives in all axes (xyzac)
actively cooled y carriage

automatic length compensation of main spindle via direct measuring system

5achsen-simultan and spline interpolsation (polynomials 3.grades)

round table with torque drive 5-AXIS MACHINING CENTER- FEHLMANN PICOMAX 825 WITH EROWA PALLET AUTOMATION CONTROL: HEIDENHEIN ITNC530 YEAR OF CONSTRUCTION: 2010 PROCEDURES/SWING AREAS: X-AXIS: 820MM Y-AXIS: 700MM Z-AXIS: 450MM A-AXIS: 230&ACIRC;&DEG; (VIEW COMPACTSET 115 &ACIRC;&DEG; +/-) C-AXIS: 360&ACIRC;&DEG; (ROUND TABLE) RAPID TRAVERSE: 30 000 MM (LINEAR AXES) SPINDLE SPEED RANGE: 50-20,000 1/MIN INTERFACE: HSK63 POWER: 24KW TORQUE: 120NM TOOL CHANGER: 80 POSITIONS (PICKUP) FACILITIES: EROWA ROBOT EASY AUTOMATION WITH 10 PALLETS FOR WORKPIECES UP TO 310 X 310 X 300 MM 80 BAR IKZ 1050 L COOLANT TANK (COOLANT PRESSURE ABOVE M FEATURES ADJUSTABLE) RENISHAW OMP 40-2 PROBE LASER TOOL MEASUREMENT FOR D0, 3-80 MM DIRECT PATH MEASUREMENT SYSTEMS FOR ALL AXES (XYZAC) ACTIVELY COOLED SHAFT DRIVES IN ALL AXES (XYZAC) ACTIVELY COOLED Y CARRIAGE AUTOMATIC LENGTH COMPENSATION OF MAIN SPINDLE VIA DIRECT MEASURING SYSTEM 5ACHSEN-SIMULTAN AND SPLINE INTERPOLSATION (POLYNOMIALS 3.GRADES) ROUND TABLE WITH TORQUE DRIVE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 4000 kg<br/>turning diameter over bed: 520 mm<br/>turning diameter over slide: 300 mm<br/>turning length: 1500 mm<br/>dimensions (l x w x h) approx.: 3400 x 1400 x 1750 mm<br/>turning speed range: 18 - 1800 rpm<br/>spindle bore: 56 mm<br/>description: kern ds 22 a centre lathe. factory number 4248. the machine is equipped with 3-jaw chuck, copying device, quick-change steel holder with 1 insert and machine lamp. further data can be found in the brochure photocopy attached as pdf. the machine is in need of overhaul! WEIGHT APPROX.: 4000 KG
TURNING DIAMETER OVER BED: 520 MM
TURNING DIAMETER OVER SLIDE: 300 MM
TURNING LENGTH: 1500 MM
DIMENSIONS (L X W X H) APPROX.: 3400 X 1400 X 1750 MM
TURNING SPEED RANGE: 18 - 1800 RPM
SPINDLE BORE: 56 MM
DESCRIPTION: KERN DS 22 A CENTRE LATHE. FACTORY NUMBER 4248. THE MACHINE IS EQUIPPED WITH 3-JAW CHUCK, COPYING DEVICE, QUICK-CHANGE STEEL HOLDER WITH 1 INSERT AND MACHINE LAMP. FURTHER DATA CAN BE FOUND IN THE BROCHURE PHOTOCOPY ATTACHED AS PDF. THE MACHINE IS IN NEED OF OVERHAUL!
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)