11 ofertas

Año de construcción: usado
Ubicación: Land-nominal force: 100t, max. istallation height: 435mm, stroke adjustment: 150mm, ram surface: 600x340mm, table dimensions: 580x450mm, connected load: 11kw.  NOMINAL FORCE: 100T, MAX. ISTALLATION HEIGHT: 435MM, STROKE ADJUSTMENT: 150MM, RAM SURFACE: 600X340MM, TABLE DIMENSIONS: 580X450MM, CONNECTED LOAD: 11KW.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure:400 t<br/>stroke:400 mm<br/>table surface area:980 x 960 mm<br/>dimensions:2100 x 2120 x 3600 mm<br/>total power requirement:55 kw<br/>weight of the machine ca.:21 t<br/>daylight opening:630 mm<br/>column daylight:1000 mm<br/>stand round side:370 mm<br/>ram head width:980 mm<br/>plunger depth:950 mm<br/>t-slots h 12     650:28 mm<br/>adjustable pressure retention time :0-6 sec<br/>table height above ground level:850 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>macrolone protective disc at the front, above c 4000: <br/>painting: struck varnish according to ral clay according to specification: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>oil cooling as a water heat exchanger thermostatically controlled:2760 ?<br/>oil cooling as an air cooler:3960 ?<br/>sync control to link the press to feeding devices:710 ?<br/>press control as memory programmable control, type s7-1500 with siemens control display kp700:10980 ?<br/>pressure setting via kp 700:3780 ?<br/>dritrolled relief for operation with tool springs:1980 ?<br/><br/> PRESSURE:400 T
STROKE:400 MM
TABLE SURFACE AREA:980 X 960 MM
DIMENSIONS:2100 X 2120 X 3600 MM
TOTAL POWER REQUIREMENT:55 KW
WEIGHT OF THE MACHINE CA.:21 T
DAYLIGHT OPENING:630 MM
COLUMN DAYLIGHT:1000 MM
STAND ROUND SIDE:370 MM
RAM HEAD WIDTH:980 MM
PLUNGER DEPTH:950 MM
T-SLOTS H 12 650:28 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
MACROLONE PROTECTIVE DISC AT THE FRONT, ABOVE C 4000:
PAINTING: STRUCK VARNISH ACCORDING TO RAL CLAY ACCORDING TO SPECIFICATION:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2760 ?
OIL COOLING AS AN AIR COOLER:3960 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:710 ?
PRESS CONTROL AS MEMORY PROGRAMMABLE CONTROL, TYPE S7-1500 WITH SIEMENS CONTROL DISPLAY KP700:10980 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1980 ?

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-operating voltage: 380/400 volts, power: 1,1 kw, force 5 kn, safety distance: 100 mm, min., stopping factory 10 mm, max.

errors excepted!      OPERATING VOLTAGE: 380/400 VOLTS, POWER: 1,1 KW, FORCE 5 KN, SAFETY DISTANCE: 100 MM, MIN., STOPPING FACTORY 10 MM, MAX. ERRORS EXCEPTED!
Vendedor: Ingenieurbüro Lenhart
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>stroke:300 mm<br/>table surface area:1000 x 700 mm<br/>dimensions:2500 x 2500 x 3400 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:10 t<br/>daylight opening:600 mm<br/>column daylight:1100 mm<br/>stand round side:300 mm<br/>ram head width:1000 mm<br/>plunger depth:650 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:40 mm<br/>table height above ground level:850 mm<br/>table fall through hole:80 mm<br/>two user manuals with awf card and complete electrical and hydraulic plans: <br/>mechanical fixed stop, hand adjustable:100 mm<br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>lacquering: structural varnish according to ral 7035: <br/><br/> PRESSURE:160 T
STROKE:300 MM
TABLE SURFACE AREA:1000 X 700 MM
DIMENSIONS:2500 X 2500 X 3400 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:10 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1100 MM
STAND ROUND SIDE:300 MM
RAM HEAD WIDTH:1000 MM
PLUNGER DEPTH:650 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:40 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:80 MM
TWO USER MANUALS WITH AWF CARD AND COMPLETE ELECTRICAL AND HYDRAULIC PLANS:
MECHANICAL FIXED STOP, HAND ADJUSTABLE:100 MM
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
LACQUERING: STRUCTURAL VARNISH ACCORDING TO RAL 7035:

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-operating voltage: 380/400 v, power: 1.5 kw, force 5 kn, clearance: 180 mm, min., trailing plant 12 mm, max.

errors excepted!      OPERATING VOLTAGE: 380/400 V, POWER: 1.5 KW, FORCE 5 KN, CLEARANCE: 180 MM, MIN., TRAILING PLANT 12 MM, MAX. ERRORS EXCEPTED!
Vendedor: Ingenieurbüro Lenhart
Año de construcción: usado
Ubicación: Land-pressure:200 t<br/>stroke:300 mm<br/>table surface area:1800 x 1000 mm<br/>dimensions:2800 x 2140 x 3600 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:24 t<br/>daylight opening:600 mm<br/>column daylight:1850 mm<br/>stand round side:400 mm<br/>ram head width:1850 mm<br/>plunger depth:820 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>table height over floor, with pit for drawing pillow:850 mm<br/>table height over hallway, without pit for pull pillow:1150 mm<br/>hole pattern for drawing pillows:94 x Ø 30 mm<br/>plunger bore, Ø h7:60 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>painting: struck varnish according to ral clay according to specification: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>sick-light curtain control leuze mlc 750-protection range height 750 mm: <br/>makrolon-protective glass front, above the light barrier: <br/>electric control: plc, siemens model s7: <br/>oil cooling as a water heat exchanger thermostatically controlled:2760 ?<br/>oil cooling as an air cooler:3960 ?<br/>sync control to link the press to feeding devices:710 ?<br/>pressure setting via kp 700:3780 ?<br/>dritrolled relief for operation with tool springs:1980 ?<br/>pressure setting via kp 700:3780 ?<br/>draw pressure setting table via kp700:3780 ?<br/>draw pressure setting progressive/degressive:1960 <br/><br/> PRESSURE:200 T
STROKE:300 MM
TABLE SURFACE AREA:1800 X 1000 MM
DIMENSIONS:2800 X 2140 X 3600 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:24 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1850 MM
STAND ROUND SIDE:400 MM
RAM HEAD WIDTH:1850 MM
PLUNGER DEPTH:820 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
TABLE HEIGHT OVER FLOOR, WITH PIT FOR DRAWING PILLOW:850 MM
TABLE HEIGHT OVER HALLWAY, WITHOUT PIT FOR PULL PILLOW:1150 MM
HOLE PATTERN FOR DRAWING PILLOWS:94 X Ø 30 MM
PLUNGER BORE, Ø H7:60 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
PAINTING: STRUCK VARNISH ACCORDING TO RAL CLAY ACCORDING TO SPECIFICATION:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
SICK-LIGHT CURTAIN CONTROL LEUZE MLC 750-PROTECTION RANGE HEIGHT 750 MM:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE LIGHT BARRIER:
ELECTRIC CONTROL: PLC, SIEMENS MODEL S7:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2760 ?
OIL COOLING AS AN AIR COOLER:3960 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:710 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1980 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRAW PRESSURE SETTING TABLE VIA KP700:3780 ?
DRAW PRESSURE SETTING PROGRESSIVE/DEGRESSIVE:1960

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>stroke:300 mm<br/>table surface area:700 x 700 mm<br/>dimensions:1700 x 1600 x 3500 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:9,5 t<br/>daylight opening:600 mm<br/>column daylight:750 mm<br/>stand round side:220 mm<br/>ram head width:700 mm<br/>plunger depth:560 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:50 mm<br/>table height above ground level:850 mm<br/>table fall through hole:360 x 180 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>two-hand security circuit: <br/>sick-light curtain control c-4000 standard 600 protection range height 600 mm: <br/>makrolon-protective glass front, above the fgs: <br/>painting: strucktur lacquer according to ral 6011: <br/><br/> PRESSURE:160 T
STROKE:300 MM
TABLE SURFACE AREA:700 X 700 MM
DIMENSIONS:1700 X 1600 X 3500 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:9,5 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:750 MM
STAND ROUND SIDE:220 MM
RAM HEAD WIDTH:700 MM
PLUNGER DEPTH:560 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:50 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:360 X 180 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
TWO-HAND SECURITY CIRCUIT:
SICK-LIGHT CURTAIN CONTROL C-4000 STANDARD 600 PROTECTION RANGE HEIGHT 600 MM:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE FGS:
PAINTING: STRUCKTUR LACQUER ACCORDING TO RAL 6011:

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-pressure:65 t<br/>stroke:300 mm<br/>table surface area:730 x 440 mm<br/>dimensions:1500 x 1400 x 3100 mm<br/>total power requirement:11 kw<br/>weight of the machine ca.:4,5 t<br/>daylight opening:550 mm<br/>column daylight:800 mm<br/>stand round side:150 mm<br/>ram head width:730 mm<br/>plunger depth:370 mm<br/>t-slots h 12     650:18 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:50 mm<br/>table height above ground level:850 mm<br/>table fall through hole:350 x 125 mm<br/>table diarrhound hole with orbiting milling:380 x 155 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>two-hand security circuit: <br/>sick-light curtain control c-4000 standard 600 protection range height 600 mm: <br/>makrolon-protective glass front, above the fgs: <br/>painting: strucktur lacquer according to ral 6011: <br/>tension lock in the pestle plate: <br/><br/> PRESSURE:65 T
STROKE:300 MM
TABLE SURFACE AREA:730 X 440 MM
DIMENSIONS:1500 X 1400 X 3100 MM
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:4,5 T
DAYLIGHT OPENING:550 MM
COLUMN DAYLIGHT:800 MM
STAND ROUND SIDE:150 MM
RAM HEAD WIDTH:730 MM
PLUNGER DEPTH:370 MM
T-SLOTS H 12 650:18 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:50 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:350 X 125 MM
TABLE DIARRHOUND HOLE WITH ORBITING MILLING:380 X 155 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
TWO-HAND SECURITY CIRCUIT:
SICK-LIGHT CURTAIN CONTROL C-4000 STANDARD 600 PROTECTION RANGE HEIGHT 600 MM:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE FGS:
PAINTING: STRUCKTUR LACQUER ACCORDING TO RAL 6011:
TENSION LOCK IN THE PESTLE PLATE:

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-pressure:300 t<br/>stroke:150 mm<br/>table surface area:830 x 920 mm<br/>dimensions:1800 x 2120 x 3760 mm<br/>total power requirement:55 kw<br/>weight of the machine ca.:20 t<br/>daylight opening:600  mm<br/>column daylight:850 mm<br/>stand round side:400 mm<br/>ram head width:820 mm<br/>plunger depth:850 mm<br/>t-slots h 12     650:28 mm<br/>adjustable pressure retention time :0-6 sec<br/>table height above ground level:850 mm<br/>table fall through hole:300 x 320 mm<br/>siemens control system: <br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>macrolone protective disc at the front, above c 4000: <br/>painting: struck varnish according to ral clay according to specification: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>oil cooling as a water heat exchanger thermostatically controlled:2760 ?<br/>oil cooling as an air cooler:3960 ?<br/>sync control to link the press to feeding devices:710 ?<br/>press control as memory programmable control, type s7-1500 with siemens control display kp700:10980 ?<br/>pressure setting via kp 700:3780 ?<br/>dritrolled relief for operation with tool springs:1980 ?<br/><br/> PRESSURE:300 T
STROKE:150 MM
TABLE SURFACE AREA:830 X 920 MM
DIMENSIONS:1800 X 2120 X 3760 MM
TOTAL POWER REQUIREMENT:55 KW
WEIGHT OF THE MACHINE CA.:20 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:850 MM
STAND ROUND SIDE:400 MM
RAM HEAD WIDTH:820 MM
PLUNGER DEPTH:850 MM
T-SLOTS H 12 650:28 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE FALL THROUGH HOLE:300 X 320 MM
SIEMENS CONTROL SYSTEM:
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
MACROLONE PROTECTIVE DISC AT THE FRONT, ABOVE C 4000:
PAINTING: STRUCK VARNISH ACCORDING TO RAL CLAY ACCORDING TO SPECIFICATION:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2760 ?
OIL COOLING AS AN AIR COOLER:3960 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:710 ?
PRESS CONTROL AS MEMORY PROGRAMMABLE CONTROL, TYPE S7-1500 WITH SIEMENS CONTROL DISPLAY KP700:10980 ?
PRESSURE SETTING VIA KP 700:3780 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1980 ?

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-pressure:200 t<br/>stroke:300 mm<br/>table surface area:1000 x 650 mm<br/>dimensions:1700 x 1300 x 3200 mm<br/>total power requirement:30 kw<br/>weight of the machine ca.:7 t<br/>daylight opening:600 mm<br/>column daylight:1050 mm<br/>stand round side:250 mm<br/>ram head width:720 mm<br/>plunger depth:560 mm<br/>t-slots h 12     650:22 mm<br/>adjustable pressure retention time :0-6 sec<br/>plunger bore, Ø h7:50 mm<br/>pulling power pullet cushion:500 kn<br/>pull surface pull cushion:600 x 350 mm<br/>hub pull cushion:100 mm<br/>table height above ground level:850 mm<br/>table diarrhea hole Ø, + hole image:250 mm<br/>mechanical fixed stop, hand adjustable: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/>two-hand security circuit: <br/>foot single hub shift: <br/>engine hours counter: <br/>pulling cushion under the press table: <br/>sick light curtain control c-4000 standard 750 protective range height 750 mm: <br/>macrolone protective disc at the front, above c 4000: <br/>lacquering: structural varnish according to ral 7035: <br/>oil cooling as a water heat exchanger thermostatically controlled:2980 ?<br/>oil cooling as an air cooler:3360 ?<br/>sync control to link the press to feeding devices:760 ?<br/>dritrolled relief for operation with tool springs:1120 ?<br/>foot switch with plug:185 ?<br/>blowout device with adjustable blowing time:710 ?<br/>waldmann-machine light:195 ?<br/>press control as s7-1500 memory programmable control while maintaining lifting settings:4860 ?<br/>press control as a memory programmable s7-1500 control with siemens control display kp700:12860 ?<br/>pressure setting main cylinder via kp700 (only possible in conjunction with pos. 44):3570 ?<br/>pressure setting pulpit cushions via kp700 (only possible in conjunction with pos. 44):3570 ?<br/><br/> PRESSURE:200 T
STROKE:300 MM
TABLE SURFACE AREA:1000 X 650 MM
DIMENSIONS:1700 X 1300 X 3200 MM
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:7 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1050 MM
STAND ROUND SIDE:250 MM
RAM HEAD WIDTH:720 MM
PLUNGER DEPTH:560 MM
T-SLOTS H 12 650:22 MM
ADJUSTABLE PRESSURE RETENTION TIME :0-6 SEC
PLUNGER BORE, Ø H7:50 MM
PULLING POWER PULLET CUSHION:500 KN
PULL SURFACE PULL CUSHION:600 X 350 MM
HUB PULL CUSHION:100 MM
TABLE HEIGHT ABOVE GROUND LEVEL:850 MM
TABLE DIARRHEA HOLE Ø, + HOLE IMAGE:250 MM
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:
TWO-HAND SECURITY CIRCUIT:
FOOT SINGLE HUB SHIFT:
ENGINE HOURS COUNTER:
PULLING CUSHION UNDER THE PRESS TABLE:
SICK LIGHT CURTAIN CONTROL C-4000 STANDARD 750 PROTECTIVE RANGE HEIGHT 750 MM:
MACROLONE PROTECTIVE DISC AT THE FRONT, ABOVE C 4000:
LACQUERING: STRUCTURAL VARNISH ACCORDING TO RAL 7035:
OIL COOLING AS A WATER HEAT EXCHANGER THERMOSTATICALLY CONTROLLED:2980 ?
OIL COOLING AS AN AIR COOLER:3360 ?
SYNC CONTROL TO LINK THE PRESS TO FEEDING DEVICES:760 ?
DRITROLLED RELIEF FOR OPERATION WITH TOOL SPRINGS:1120 ?
FOOT SWITCH WITH PLUG:185 ?
BLOWOUT DEVICE WITH ADJUSTABLE BLOWING TIME:710 ?
WALDMANN-MACHINE LIGHT:195 ?
PRESS CONTROL AS S7-1500 MEMORY PROGRAMMABLE CONTROL WHILE MAINTAINING LIFTING SETTINGS:4860 ?
PRESS CONTROL AS A MEMORY PROGRAMMABLE S7-1500 CONTROL WITH SIEMENS CONTROL DISPLAY KP700:12860 ?
PRESSURE SETTING MAIN CYLINDER VIA KP700 (ONLY POSSIBLE IN CONJUNCTION WITH POS. 44):3570 ?
PRESSURE SETTING PULPIT CUSHIONS VIA KP700 (ONLY POSSIBLE IN CONJUNCTION WITH POS. 44):3570 ?

Vendedor: Hidrobrasil GmbH
Año de construcción: usado
Ubicación: Land-pressure:200 t<br/>stroke:300 mm<br/>table surface area:1800 x 1000 mm<br/>dimensions:ca. 2800 x 2140 x 3600 mm<br/>total power requirement:30 kw<br/>pressure power:300 bar<br/>weight of the machine ca.:24 t<br/>daylight opening:600  mm<br/>column daylight:1850 mm<br/>stand round side:400 mm<br/>table height over floor, with pit for drawing pillow:850 mm<br/>table height over hallway, without pit for pull pillow:1150 mm<br/>ram head width:1850 mm<br/>plunger depth:820 mm<br/>t-slots h 12     650:22 mm<br/>hole pattern for drawing pillows:94 x Ø30 mm<br/>plunger bore, Ø h7:60 mm<br/>adjustable pressure retention time : sec<br/>siemens control system: <br/>mechanical fixed stop, hand adjustable: <br/>sick-light curtain control leuze mlc 750-protection range height 750 mm: <br/>start-up lock-restart lock: <br/>lockable operating mode selector switch: <br/>set-up-tap, sensitive in slow motion: <br/>non-contacting limit switches for stroke setting: <br/>hub switching selectable off-or pressure-dependent: <br/>adjustable pressure adjustment via handwheel with disc scale and pressure gauge for press force disp: <br/>electric stroke counter: <br/>control lights: <br/>makrolon-protective glass front, above the light barrier: <br/>automatic backflow control: <br/>guard grille for rear and lateral stand passages: <br/><br/> PRESSURE:200 T
STROKE:300 MM
TABLE SURFACE AREA:1800 X 1000 MM
DIMENSIONS:CA. 2800 X 2140 X 3600 MM
TOTAL POWER REQUIREMENT:30 KW
PRESSURE POWER:300 BAR
WEIGHT OF THE MACHINE CA.:24 T
DAYLIGHT OPENING:600 MM
COLUMN DAYLIGHT:1850 MM
STAND ROUND SIDE:400 MM
TABLE HEIGHT OVER FLOOR, WITH PIT FOR DRAWING PILLOW:850 MM
TABLE HEIGHT OVER HALLWAY, WITHOUT PIT FOR PULL PILLOW:1150 MM
RAM HEAD WIDTH:1850 MM
PLUNGER DEPTH:820 MM
T-SLOTS H 12 650:22 MM
HOLE PATTERN FOR DRAWING PILLOWS:94 X Ø30 MM
PLUNGER BORE, Ø H7:60 MM
ADJUSTABLE PRESSURE RETENTION TIME : SEC
SIEMENS CONTROL SYSTEM:
MECHANICAL FIXED STOP, HAND ADJUSTABLE:
SICK-LIGHT CURTAIN CONTROL LEUZE MLC 750-PROTECTION RANGE HEIGHT 750 MM:
START-UP LOCK-RESTART LOCK:
LOCKABLE OPERATING MODE SELECTOR SWITCH:
SET-UP-TAP, SENSITIVE IN SLOW MOTION:
NON-CONTACTING LIMIT SWITCHES FOR STROKE SETTING:
HUB SWITCHING SELECTABLE OFF-OR PRESSURE-DEPENDENT:
ADJUSTABLE PRESSURE ADJUSTMENT VIA HANDWHEEL WITH DISC SCALE AND PRESSURE GAUGE FOR PRESS FORCE DISP:
ELECTRIC STROKE COUNTER:
CONTROL LIGHTS:
MAKROLON-PROTECTIVE GLASS FRONT, ABOVE THE LIGHT BARRIER:
AUTOMATIC BACKFLOW CONTROL:
GUARD GRILLE FOR REAR AND LATERAL STAND PASSAGES:

Vendedor: Hidrobrasil GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more SCHOEN types: