35 ofertas

Año de construcción: usado
Ubicación: Land-hartmann presse mod. acp-u-e64-1250-me / bj 68-2003 / 64 t / 260 bar / table 1250 mm / height 500 / hub 250 / 300 stand projection / 7.5 kw / digital mod. dnc 60 / akas security system / good condition
fe.gi.maschinen.sbg.at

hartmann press mod. acp-u-e64-1250-me / year 68 2003 / 64 t / 260 bar / table 1250 mm / install height 500 stroke 250 stator projection 300 / 7.5 kw / digital mod. dnc 60 / / akas safety system / good condition fe.gi.maschinen.sbg.at HARTMANN PRESSE MOD. ACP-U-E64-1250-ME / BJ 68-2003 / 64 T / 260 BAR / TABLE 1250 MM / HEIGHT 500 / HUB 250 / 300 STAND PROJECTION / 7.5 KW / DIGITAL MOD. DNC 60 / AKAS SECURITY SYSTEM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT HARTMANN PRESS MOD. ACP-U-E64-1250-ME / YEAR 68 2003 / 64 T / 260 BAR / TABLE 1250 MM / INSTALL HEIGHT 500 STROKE 250 STATOR PROJECTION 300 / 7.5 KW / DIGITAL MOD. DNC 60 / / AKAS SAFETY SYSTEM / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Precio: 190 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-single-sided edge banding machine with pull-out workpiece support, end trimming unit and combi-unit.

power consumption: 400 v / 50 hz / 3 ph / 7 kw
compressed air supply: 6 bar
dimensions: approx. 4,000 x 1.300 (1,780) x 1520 mm
edition extendable to 800 mm
working height: 820 mm
roller plate 㸠700 mm
 SINGLE-SIDED EDGE BANDING MACHINE WITH PULL-OUT WORKPIECE SUPPORT, END TRIMMING UNIT AND COMBI-UNIT. POWER CONSUMPTION: 400 V / 50 HZ / 3 PH / 7 KW COMPRESSED AIR SUPPLY: 6 BAR DIMENSIONS: APPROX. 4,000 X 1.300 (1,780) X 1520 MM EDITION EXTENDABLE TO 800 MM WORKING HEIGHT: 820 MM ROLLER PLATE ø 700 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: 120 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-power 380v 7kw
heated infeed fence
glue tank
tracking/opposite
4 st. pinch rollers
butting saw unit with 1 blade
caps scissors up to 3 mm
flush trimming unit / rounding
suction connector 160 mm
electrical converters POWER 380V 7KW HEATED INFEED FENCE GLUE TANK TRACKING/OPPOSITE 4 ST. PINCH ROLLERS BUTTING SAW UNIT WITH 1 BLADE CAPS SCISSORS UP TO 3 MM FLUSH TRIMMING UNIT / ROUNDING SUCTION CONNECTOR 160 MM ELECTRICAL CONVERTERS
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: 170 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 17.000 €
Ubicación: Land-fast clipper with a conveyer belt for use behind a horizontal flow wrapper
50 per / min
revised in 2018 FAST CLIPPER WITH A CONVEYER BELT FOR USE BEHIND A HORIZONTAL FLOW WRAPPER 50 PER / MIN REVISED IN 2018
Vendedor: Kremers Verpackungsmaschinen Vertrieb und Service GmbH & Co.
Año de construcción: usado
Precio: 60 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 17.000 €
Ubicación: Land-fast clipper for use behind a vertical pillow-pack machine
50 per / min
revised in 2018
 FAST CLIPPER FOR USE BEHIND A VERTICAL PILLOW-PACK MACHINE 50 PER / MIN REVISED IN 2018
Vendedor: Kremers Verpackungsmaschinen Vertrieb und Service GmbH & Co.
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-packaging machine 
with in feed for sliced or complete breads
with integrated clip device with date printer
suitable for plastic or paper bags 
product size: l: 100-400 mm, b: up to 230 mm, h: 30-150 mm
capacity up to 25 packages / min
complete stainless covered

on request we will send you an offer you!  PACKAGING MACHINE WITH IN FEED FOR SLICED OR COMPLETE BREADS WITH INTEGRATED CLIP DEVICE WITH DATE PRINTER SUITABLE FOR PLASTIC OR PAPER BAGS PRODUCT SIZE: L: 100-400 MM, B: UP TO 230 MM, H: 30-150 MM CAPACITY UP TO 25 PACKAGES / MIN COMPLETE STAINLESS COVERED ON REQUEST WE WILL SEND YOU AN OFFER YOU!
Vendedor: Bakers Good GmbH & Co. KG
Año de construcción: usado
Precio: 320 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-packaging-clipping machine hartmann, weight 600kg, dimensions 1800x1060x1900mm PACKAGING-CLIPPING MACHINE HARTMANN, WEIGHT 600KG, DIMENSIONS 1800X1060X1900MM
Vendedor: Interfaces doo
Año de construcción: usado
Precio: 140 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-used bread bun line konig, vmi, gouet, hartmann, denestech

capacity: 15.000 pieces per hour (depending on product)
weight range: 35-70 gram
year: 1999
out of production, still in line

dough preparation

vmi bowl lift, model: elevateur
max. capacity: 500 kg (dough + bowl)
make-up

könig rex automat, model kgn
divider, rounder (6 rows)
intermediate proofer (5-6 min)
long moulder
retracting system
tray handling

gouet tray transport conveyors
proofing

gouet proofing system
including clima unit
average proofing time: 2 hours
proofing: 40°c at 90% humidity
egg yolk spraying unit including storage tank
waterjet scoring unit
baking

gouet tunnel oven, model: ligne ft
indirect gas heated
2 burners
length: 16 m
width: 2,5 m
indirect heated cyclotherm system
wiremesh belt
average baking time: 12 minutes
needle depanner
cooling

gouet cooler
including climate unit
cooling time controllable per level (earlier discharge)
10 levels
including infeed elevator
including discharge elevator
transport conveyors
packaging

loma systems metal detector
transfer conveyors to packaging
hartmann automat gbk 220 bagger
denestech cup de-nesting unit

controls: schneider  USED BREAD BUN LINE KONIG, VMI, GOUET, HARTMANN, DENESTECH CAPACITY: 15.000 PIECES PER HOUR (DEPENDING ON PRODUCT) WEIGHT RANGE: 35-70 GRAM YEAR: 1999 OUT OF PRODUCTION, STILL IN LINE DOUGH PREPARATION VMI BOWL LIFT, MODEL: ELEVATEUR MAX. CAPACITY: 500 KG (DOUGH + BOWL) MAKE-UP KöNIG REX AUTOMAT, MODEL KGN DIVIDER, ROUNDER (6 ROWS) INTERMEDIATE PROOFER (5-6 MIN) LONG MOULDER RETRACTING SYSTEM TRAY HANDLING GOUET TRAY TRANSPORT CONVEYORS PROOFING GOUET PROOFING SYSTEM INCLUDING CLIMA UNIT AVERAGE PROOFING TIME: 2 HOURS PROOFING: 40°C AT 90% HUMIDITY EGG YOLK SPRAYING UNIT INCLUDING STORAGE TANK WATERJET SCORING UNIT BAKING GOUET TUNNEL OVEN, MODEL: LIGNE FT INDIRECT GAS HEATED 2 BURNERS LENGTH: 16 M WIDTH: 2,5 M INDIRECT HEATED CYCLOTHERM SYSTEM WIREMESH BELT AVERAGE BAKING TIME: 12 MINUTES NEEDLE DEPANNER COOLING GOUET COOLER INCLUDING CLIMATE UNIT COOLING TIME CONTROLLABLE PER LEVEL (EARLIER DISCHARGE) 10 LEVELS INCLUDING INFEED ELEVATOR INCLUDING DISCHARGE ELEVATOR TRANSPORT CONVEYORS PACKAGING LOMA SYSTEMS METAL DETECTOR TRANSFER CONVEYORS TO PACKAGING HARTMANN AUTOMAT GBK 220 BAGGER DENESTECH CUP DE-NESTING UNIT CONTROLS: SCHNEIDER
Vendedor: In.Ha.TEC Vertrieb & Service UG
Año de construcción: usado
Precio: 320 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-6 elements height 3000 mm width 1250 mm thickness 72 mm  6 ELEMENTS HEIGHT 3000 MM WIDTH 1250 MM THICKNESS 72 MM
Vendedor: Warzecha GmbH - Gebrauchtmaschinen Bodensee
Año de construcción: usado
Precio: 490 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 4.000 €
Ubicación: Land-clip (clipping unit) device for vertical filling machines (machines).
geeignte to the sealing of vertical filled bulk bag packs. the unit is mounted on castors and equipped with pulse-controlled self-propelled. dei loading can be done manually or through a vertical packaging machine.
a synchronization with the packaging machine is nichtnerforderlich.
dimensions: length ca 1070 mm
width approx.  670cmm incl. clip role approximately 1100 mm
height: 605mm
product dimensions (bag):
length/height 95-300mm
wide/pressure gauge: max 240 mm
performance: approx. 40 pack / min (product dependant)
power 0, 6kw / 2 amp
pictures below are from the original prospectus

CLIP (CLIPPING UNIT) DEVICE FOR VERTICAL FILLING MACHINES (MACHINES). GEEIGNTE TO THE SEALING OF VERTICAL FILLED BULK BAG PACKS. THE UNIT IS MOUNTED ON CASTORS AND EQUIPPED WITH PULSE-CONTROLLED SELF-PROPELLED. DEI LOADING CAN BE DONE MANUALLY OR THROUGH A VERTICAL PACKAGING MACHINE. A SYNCHRONIZATION WITH THE PACKAGING MACHINE IS NICHTNERFORDERLICH. DIMENSIONS: LENGTH CA 1070 MM WIDTH APPROX. 670CMM INCL. CLIP ROLE APPROXIMATELY 1100 MM HEIGHT: 605MM PRODUCT DIMENSIONS (BAG): LENGTH/HEIGHT 95-300MM WIDE/PRESSURE GAUGE: MAX 240 MM PERFORMANCE: APPROX. 40 PACK / MIN (PRODUCT DEPENDANT) POWER 0, 6KW / 2 AMP PICTURES BELOW ARE FROM THE ORIGINAL PROSPECTUS
Vendedor: EDORA Gewürze Eduard Dornberg GmbH & Co.KG
Año de construcción: usado
Precio: 80 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-pillow-pack machine altamat (german manufacturer), stainless steel version, with optima sd auger filler for powders and fine products;
-incl. 2 screw sets (d 40 x 40, d 25 x 25);
-for block bottom bags/stand-up pouches in 3 formats (50x30mm, 60x40mm, 100x60mm height /. variable) as well as for flat bag (width 8 cm or 10 cm, height variable)
-incl. dispenser by bbk
-gassing system provided (such as for oxygen and c02)
-incl. slope conveyor
-optinal: hartmann-clipper to attach clips to the sealed bag
-machine is selling from oct 2017 until end of sept. in operation,
-machine is fully functional
-sale without metal detector and check-weigher
-tendency to control possible, i.e. connection to check weigher
-bj = commissioning 1997 1996,
 PILLOW-PACK MACHINE ALTAMAT (GERMAN MANUFACTURER), STAINLESS STEEL VERSION, WITH OPTIMA SD AUGER FILLER FOR POWDERS AND FINE PRODUCTS; -INCL. 2 SCREW SETS (D 40 X 40, D 25 X 25); -FOR BLOCK BOTTOM BAGS/STAND-UP POUCHES IN 3 FORMATS (50X30MM, 60X40MM, 100X60MM HEIGHT /. VARIABLE) AS WELL AS FOR FLAT BAG (WIDTH 8 CM OR 10 CM, HEIGHT VARIABLE) -INCL. DISPENSER BY BBK -GASSING SYSTEM PROVIDED (SUCH AS FOR OXYGEN AND C02) -INCL. SLOPE CONVEYOR -OPTINAL: HARTMANN-CLIPPER TO ATTACH CLIPS TO THE SEALED BAG -MACHINE IS SELLING FROM OCT 2017 UNTIL END OF SEPT. IN OPERATION, -MACHINE IS FULLY FUNCTIONAL -SALE WITHOUT METAL DETECTOR AND CHECK-WEIGHER -TENDENCY TO CONTROL POSSIBLE, I.E. CONNECTION TO CHECK WEIGHER -BJ = COMMISSIONING 1997 1996,
Vendedor: EDORA Gewürze Eduard Dornberg GmbH & Co.KG
Año de construcción: usado
Precio: 140 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land--planetary mixer
-performance approximately 40-55 cbm / h
-mixer tank 1.500 ltr.
-e-motor 45 kw
-mixing arms 2 rotating mixing arms with 2 scrapers
-lining cast tiles
-emptying electric / hydraulic. flap opening
-weighing system to 4 weighing cells, digital display with plc
-on 3-axle semi-trailer
-power unit 125 kva -PLANETARY MIXER -PERFORMANCE APPROXIMATELY 40-55 CBM / H -MIXER TANK 1.500 LTR. -E-MOTOR 45 KW -MIXING ARMS 2 ROTATING MIXING ARMS WITH 2 SCRAPERS -LINING CAST TILES -EMPTYING ELECTRIC / HYDRAULIC. FLAP OPENING -WEIGHING SYSTEM TO 4 WEIGHING CELLS, DIGITAL DISPLAY WITH PLC -ON 3-AXLE SEMI-TRAILER -POWER UNIT 125 KVA
Vendedor: ENDERS Produktion GmbH
Año de construcción: usado
Precio: 320 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-worm conveyors stainless went long 1500 to 14000 mm width 210 to 300 mm.
very good condition. WORM CONVEYORS STAINLESS WENT LONG 1500 TO 14000 MM WIDTH 210 TO 300 MM. VERY GOOD CONDITION.
Vendedor: Tecnova service Sarl
Año de construcción: usado
Precio: 190 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-centrifugal fan, hartmann offenbach
type heb 06 566 no. 508 916
flow rate m³/min 2.1
pressure mm ws 500
built in 1953
   CENTRIFUGAL FAN, HARTMANN OFFENBACH TYPE HEB 06 566 NO. 508 916 FLOW RATE M³/MIN 2.1 PRESSURE MM WS 500 BUILT IN 1953
Vendedor: Herr Kurt Hinst
Año de construcción: usado
Precio: 80 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-article number: ma615
manufacturer: hartmann
type: acp 10-30-dnc
year of construction: 1992
machine number: 02592
bending length [mm]: 3000
press power [to]: 100
control: cybelec dnc-74pse
weight [kg]: ca. 10000
power supply: 380 v
accessories:
operating instructions
wiring diagrams ARTICLE NUMBER: MA615 MANUFACTURER: HARTMANN TYPE: ACP 10-30-DNC YEAR OF CONSTRUCTION: 1992 MACHINE NUMBER: 02592 BENDING LENGTH [MM]: 3000 PRESS POWER [TO]: 100 CONTROL: CYBELEC DNC-74PSE WEIGHT [KG]: CA. 10000 POWER SUPPLY: 380 V ACCESSORIES: OPERATING INSTRUCTIONS WIRING DIAGRAMS
Vendedor: Ulrich Müller Maschinenhandel
Año de construcción: usado
Precio: 120 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 50.000 €
Ubicación: Land-reconditioned weinbrenner shear tsv 6/3050

built in 1982
machine number: 628 t

backgauge: up to 2,000 mm travels with high attachment

in 2012/2013 by engineering hartmann, wilnsdorf overhauled. 
since then only for test cuts. selling due to purchase of a 16 mm scissors.

work carried out:
total renewal of hydraulic control for the functions: cut, clamp material and cutting angle adjustment via the central control unit. new piping, hocgdruckverschraubungen and new high-pressure hoses
hydraukikzylinder: cleaned, replaced seals and screws
holders cleaned, new seals fitted
finger protection device before the clamps (screw-down unbreakable makrolonscheibe)

scissors knife re-sharpened and set

cutting light

new wiring, new electrical cabinet with siemens s7 300, 18 position switches for scissors ot/ut, min/max stop, cutting angle, blade gap

touch panel functions pump drive, holders, scissors, trailing stop adjustment, cutting angle adjustment, cutting gap adjustment

sanded, primed and repainted
 RECONDITIONED WEINBRENNER SHEAR TSV 6/3050 BUILT IN 1982 MACHINE NUMBER: 628 T BACKGAUGE: UP TO 2,000 MM TRAVELS WITH HIGH ATTACHMENT IN 2012/2013 BY ENGINEERING HARTMANN, WILNSDORF OVERHAULED. SINCE THEN ONLY FOR TEST CUTS. SELLING DUE TO PURCHASE OF A 16 MM SCISSORS. WORK CARRIED OUT: TOTAL RENEWAL OF HYDRAULIC CONTROL FOR THE FUNCTIONS: CUT, CLAMP MATERIAL AND CUTTING ANGLE ADJUSTMENT VIA THE CENTRAL CONTROL UNIT. NEW PIPING, HOCGDRUCKVERSCHRAUBUNGEN AND NEW HIGH-PRESSURE HOSES HYDRAUKIKZYLINDER: CLEANED, REPLACED SEALS AND SCREWS HOLDERS CLEANED, NEW SEALS FITTED FINGER PROTECTION DEVICE BEFORE THE CLAMPS (SCREW-DOWN UNBREAKABLE MAKROLONSCHEIBE) SCISSORS KNIFE RE-SHARPENED AND SET CUTTING LIGHT NEW WIRING, NEW ELECTRICAL CABINET WITH SIEMENS S7 300, 18 POSITION SWITCHES FOR SCISSORS OT/UT, MIN/MAX STOP, CUTTING ANGLE, BLADE GAP TOUCH PANEL FUNCTIONS PUMP DRIVE, HOLDERS, SCISSORS, TRAILING STOP ADJUSTMENT, CUTTING ANGLE ADJUSTMENT, CUTTING GAP ADJUSTMENT SANDED, PRIMED AND REPAINTED
Vendedor: hpulcas GmbH
Año de construcción: usado
Ubicación: Land-pressure: 110 t<br/>chamfer lenght: 3050 mm<br/>distance between columns: 2550 mm<br/>column arm: 300 mm<br/>dayligth: 450 mm<br/>ram stroke range: 200 mm<br/>back stop - adjustable: 600 mm<br/>pressure: 265 bar<br/>engine output: 16,6 kw<br/>oil volume: 300 ltr.<br/>weight: 8.700 kg.<br/><br/><br/><br/><br/> PRESSURE: 110 T
CHAMFER LENGHT: 3050 MM
DISTANCE BETWEEN COLUMNS: 2550 MM
COLUMN ARM: 300 MM
DAYLIGTH: 450 MM
RAM STROKE RANGE: 200 MM
BACK STOP - ADJUSTABLE: 600 MM
PRESSURE: 265 BAR
ENGINE OUTPUT: 16,6 KW
OIL VOLUME: 300 LTR.
WEIGHT: 8.700 KG.




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-we have for sale  a vacuun evaporation plant:

the plant consists of:

-3-stage vacuum evaporation system vv 75 kdb,

-down-flow evaporator  condest 	13 k-niro

technical details available upon request.


vacuum evaporation is a process which has been used by the large-scale chemical industry for decades. using vacuum evaporation systems allowed ? for the first time ? utilizing the advantages of this process also in small and medium-scale applications. vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection
they are used to treat under vacuum aqueous solutions which contain pollutants. the typical operating parameters are an absolute pressure of approx. 50...100 mbar and a boiling temperature of approx. 60...85 °c related to water. in practice one should expect a boiling temperature of approx. 60 °c to 85 °c depending on the composition and concentration of the product. it is not possible to evaporate products which contain large quantities of solvents with a boiling temperature lower than that of water. for products inclined to foaming, normally the relevant precautions must be initiated in terms of the systems and equipment. the same is applicable to highly aggressive media. in such cases, the vacuum evaporation system can be provided with a halar coat in the boiling chamber and a hastelloy and/or graphite heat exchanger.


typical fields of application include: 

?	recover of electrolytes from electroplating
 
?	keeping a uniform rinsing water quality in static rinsing tanks
 
?	volume reduction of sewage waters which are damaging to environment prior to (external) waste disposal
 
?	separation of oil/water emulsions in the metal processing industry (drilling and sliding grinding emulsions, and the like)
 
?	volume reduction of photographic sewage water prior to incineration and/or waste disposal

?	concentration of peg containing water

the advantages of the vacuum evaporation process include:

?	gentle product handling

?	low operating and maintenance expenditure

?	low power consumption due to operation with integrated heat pump (approx. 5 kw heating output per kw of electric drive capacity of refrigerating compressor) 

?	fully automatic operation

?	also suitable for highly aggressive and chloride containing media due to the use of high acid-resistant materials

?	heat recovery possible for larger systems. using heat recovery it is possible to generate industrial or heating water with a temperature of up to approx. 50 °c. 
   WE HAVE FOR SALE A VACUUN EVAPORATION PLANT: THE PLANT CONSISTS OF: -3-STAGE VACUUM EVAPORATION SYSTEM VV 75 KDB, -DOWN-FLOW EVAPORATOR CONDEST 13 K-NIRO TECHNICAL DETAILS AVAILABLE UPON REQUEST. VACUUM EVAPORATION IS A PROCESS WHICH HAS BEEN USED BY THE LARGE-SCALE CHEMICAL INDUSTRY FOR DECADES. USING VACUUM EVAPORATION SYSTEMS ALLOWED ? FOR THE FIRST TIME ? UTILIZING THE ADVANTAGES OF THIS PROCESS ALSO IN SMALL AND MEDIUM-SCALE APPLICATIONS. VACUUM EVAPORATION SYSTEMS HAVE BEEN DEVELOPED SPECIFICALLY FOR THE METAL MACHINING INDUSTRY AS WELL AS FOR APPLICATIONS IN THE FIELD OF ENVIRONMENTAL PROTECTION THEY ARE USED TO TREAT UNDER VACUUM AQUEOUS SOLUTIONS WHICH CONTAIN POLLUTANTS. THE TYPICAL OPERATING PARAMETERS ARE AN ABSOLUTE PRESSURE OF APPROX. 50...100 MBAR AND A BOILING TEMPERATURE OF APPROX. 60...85 °C RELATED TO WATER. IN PRACTICE ONE SHOULD EXPECT A BOILING TEMPERATURE OF APPROX. 60 °C TO 85 °C DEPENDING ON THE COMPOSITION AND CONCENTRATION OF THE PRODUCT. IT IS NOT POSSIBLE TO EVAPORATE PRODUCTS WHICH CONTAIN LARGE QUANTITIES OF SOLVENTS WITH A BOILING TEMPERATURE LOWER THAN THAT OF WATER. FOR PRODUCTS INCLINED TO FOAMING, NORMALLY THE RELEVANT PRECAUTIONS MUST BE INITIATED IN TERMS OF THE SYSTEMS AND EQUIPMENT. THE SAME IS APPLICABLE TO HIGHLY AGGRESSIVE MEDIA. IN SUCH CASES, THE VACUUM EVAPORATION SYSTEM CAN BE PROVIDED WITH A HALAR COAT IN THE BOILING CHAMBER AND A HASTELLOY AND/OR GRAPHITE HEAT EXCHANGER. TYPICAL FIELDS OF APPLICATION INCLUDE: ? RECOVER OF ELECTROLYTES FROM ELECTROPLATING ? KEEPING A UNIFORM RINSING WATER QUALITY IN STATIC RINSING TANKS ? VOLUME REDUCTION OF SEWAGE WATERS WHICH ARE DAMAGING TO ENVIRONMENT PRIOR TO (EXTERNAL) WASTE DISPOSAL ? SEPARATION OF OIL/WATER EMULSIONS IN THE METAL PROCESSING INDUSTRY (DRILLING AND SLIDING GRINDING EMULSIONS, AND THE LIKE) ? VOLUME REDUCTION OF PHOTOGRAPHIC SEWAGE WATER PRIOR TO INCINERATION AND/OR WASTE DISPOSAL ? CONCENTRATION OF PEG CONTAINING WATER THE ADVANTAGES OF THE VACUUM EVAPORATION PROCESS INCLUDE: ? GENTLE PRODUCT HANDLING ? LOW OPERATING AND MAINTENANCE EXPENDITURE ? LOW POWER CONSUMPTION DUE TO OPERATION WITH INTEGRATED HEAT PUMP (APPROX. 5 KW HEATING OUTPUT PER KW OF ELECTRIC DRIVE CAPACITY OF REFRIGERATING COMPRESSOR) ? FULLY AUTOMATIC OPERATION ? ALSO SUITABLE FOR HIGHLY AGGRESSIVE AND CHLORIDE CONTAINING MEDIA DUE TO THE USE OF HIGH ACID-RESISTANT MATERIALS ? HEAT RECOVERY POSSIBLE FOR LARGER SYSTEMS. USING HEAT RECOVERY IT IS POSSIBLE TO GENERATE INDUSTRIAL OR HEATING WATER WITH A TEMPERATURE OF UP TO APPROX. 50 °C.
Vendedor: AssistEquipment AS
Año de construcción: usado
Ubicación: Land-cutting diameter: 260 mm<br/>saw band length: 3700 mm<br/>cutting width: 400 mm<br/>cutting speed: 20 - 180 m/min<br/>cutting range rectangle: 400 x 155 / 300 x 220 mm<br/>capacity 90 degrees: square: 250 x 250 mm<br/>capacity 45 degrees: round: 170 mm<br/>capacy 45°: rectangle: 160 x 145 / 120 x 240 mm<br/>work height max.: 710 mm<br/>total power requirement: 1,5 kw<br/>weight of the machine ca.: 390 kg<br/>dimensions of the machine ca.: 1,8 x 0,65 m<br/>electric 380 volt:  <br/>cooling equipment:  <br/>material support:  <br/>positioning rod:  <br/>horizontal band saw with drive via worm gear and wide v-belt variator with 1.5 <br/>kw motor, mechanical belt tension, manual liftingof the saw after cutting, <br/>hydr. support cylinder, regulating valve for stopping or changing the feed, <br/>vise jaws for 45 ° miter.<br/>machine dealer with own stock of 2500 m² and certification of the database<br/>machineseeker.<br/><br/><br/><br/><br/> CUTTING DIAMETER: 260 MM
SAW BAND LENGTH: 3700 MM
CUTTING WIDTH: 400 MM
CUTTING SPEED: 20 - 180 M/MIN
CUTTING RANGE RECTANGLE: 400 X 155 / 300 X 220 MM
CAPACITY 90 DEGREES: SQUARE: 250 X 250 MM
CAPACITY 45 DEGREES: ROUND: 170 MM
CAPACY 45°: RECTANGLE: 160 X 145 / 120 X 240 MM
WORK HEIGHT MAX.: 710 MM
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 390 KG
DIMENSIONS OF THE MACHINE CA.: 1,8 X 0,65 M
ELECTRIC 380 VOLT:
COOLING EQUIPMENT:
MATERIAL SUPPORT:
POSITIONING ROD:
HORIZONTAL BAND SAW WITH DRIVE VIA WORM GEAR AND WIDE V-BELT VARIATOR WITH 1.5
KW MOTOR, MECHANICAL BELT TENSION, MANUAL LIFTINGOF THE SAW AFTER CUTTING,
HYDR. SUPPORT CYLINDER, REGULATING VALVE FOR STOPPING OR CHANGING THE FEED,
VISE JAWS FOR 45 ° MITER.
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-roll diameter: 400 mm<br/>throat: 385 mm<br/>workpiece height: 250 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 380 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> ROLL DIAMETER: 400 MM
THROAT: 385 MM
WORKPIECE HEIGHT: 250 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 380 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HARTMANN types: