1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-n very good technical condition.
built in 2007.
control: heidenhain cnc pilot 4290.
maximum turning diameter: 445 mm, length 1000 mm, maximum diameter 380 mm, clamping feed 3000 mm.
12 tools of which 6 x drive.
working hours: 7855
machine weight: 9.000 kg N VERY GOOD TECHNICAL CONDITION. BUILT IN 2007. CONTROL: HEIDENHAIN CNC PILOT 4290. MAXIMUM TURNING DIAMETER: 445 MM, LENGTH 1000 MM, MAXIMUM DIAMETER 380 MM, CLAMPING FEED 3000 MM. 12 TOOLS OF WHICH 6 X DRIVE. WORKING HOURS: 7855 MACHINE WEIGHT: 9.000 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-1 station, stainless steel, propan gas\r\nsizer: w/l  410, d 410, h 210 mm 1 STATION, STAINLESS STEEL, PROPAN GAS\R\NSIZER: W/L 410, D 410, H 210 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 23.000 €
Ubicación: Land-m machine type machining center - universal make matec type 30 l year 1996 control type cnc storage switzerland origin state of baden - wã¼rttemberg delivery time upon request of freight basis exw p
technical details

x trail 2000 mm y way 420 mm z trail 500 mm control heidenhain tnc 407 table dimensions 2500 x 630 mm slot number 7 t-18 h8 grooves 100 mm speed range mm t - slot distance 6000 rpm power at 40% / 100% ed 30 / 17 kw torque at 40% / 100% ed 190 / 120 nm  
feed x/y/z 30 m/min tool length of 350 mm max tool weight of max 10 kg tool diameter 70 mm tool diameter with free nebenpl. 130 mm tool holder sk 40 tool magazine with 36 seats total power 45 kw machine weight 10 tons of space requirement approx. 5 x 2.7 x 3 m additional information

electronic handwheel, chip conveyor,
 sk 40 6000 rpm
 8 schraubtsoeke arnold and werzeughalter sk 40
 good machine
 M MACHINE TYPE MACHINING CENTER - UNIVERSAL MAKE MATEC TYPE 30 L YEAR 1996 CONTROL TYPE CNC STORAGE SWITZERLAND ORIGIN STATE OF BADEN - WüRTTEMBERG DELIVERY TIME UPON REQUEST OF FREIGHT BASIS EXW P TECHNICAL DETAILS X TRAIL 2000 MM Y WAY 420 MM Z TRAIL 500 MM CONTROL HEIDENHAIN TNC 407 TABLE DIMENSIONS 2500 X 630 MM SLOT NUMBER 7 T-18 H8 GROOVES 100 MM SPEED RANGE MM T - SLOT DISTANCE 6000 RPM POWER AT 40% / 100% ED 30 / 17 KW TORQUE AT 40% / 100% ED 190 / 120 NM FEED X/Y/Z 30 M/MIN TOOL LENGTH OF 350 MM MAX TOOL WEIGHT OF MAX 10 KG TOOL DIAMETER 70 MM TOOL DIAMETER WITH FREE NEBENPL. 130 MM TOOL HOLDER SK 40 TOOL MAGAZINE WITH 36 SEATS TOTAL POWER 45 KW MACHINE WEIGHT 10 TONS OF SPACE REQUIREMENT APPROX. 5 X 2.7 X 3 M ADDITIONAL INFORMATION ELECTRONIC HANDWHEEL, CHIP CONVEYOR, SK 40 6000 RPM 8 SCHRAUBTSOEKE ARNOLD AND WERZEUGHALTER SK 40 GOOD MACHINE
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-x-travel: 2400 mm<br/>y-travel: 1250 mm<br/>z-travel: 1000 mm<br/>control: heidenhain <br/>type: tnc 426 <br/>dayligth: 1200 mm<br/>throat: 1370 mm<br/>table surface area: 4250x1250 mm<br/>workpiece weight: 12000 kg<br/>main drive: 30 kw<br/>spindle diameter: 130 mm<br/>turning speeds: 40-3150 u/min<br/>milling-head swivable   +/-: 45 °<br/>spindle taper iso: 50 <br/>total power requirement:  kw<br/>weight of the machine ca.: 50 t<br/>dimensions of the machine ca.: 5,52x9,26x4,7 m<br/><br/><br/><br/><br/> X-TRAVEL: 2400 MM
Y-TRAVEL: 1250 MM
Z-TRAVEL: 1000 MM
CONTROL: HEIDENHAIN
TYPE: TNC 426
DAYLIGTH: 1200 MM
THROAT: 1370 MM
TABLE SURFACE AREA: 4250X1250 MM
WORKPIECE WEIGHT: 12000 KG
MAIN DRIVE: 30 KW
SPINDLE DIAMETER: 130 MM
TURNING SPEEDS: 40-3150 U/MIN
MILLING-HEAD SWIVABLE +/-: 45 °
SPINDLE TAPER ISO: 50
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 50 T
DIMENSIONS OF THE MACHINE CA.: 5,52X9,26X4,7 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-46 plate cylinder 
alcohol dampening unit 
weko powder t 6
anti-static eltex
weko dba double sheet control
bacher register system
plus version
                               46 PLATE CYLINDER ALCOHOL DAMPENING UNIT WEKO POWDER T 6 ANTI-STATIC ELTEX WEKO DBA DOUBLE SHEET CONTROL BACHER REGISTER SYSTEM PLUS VERSION
Vendedor: Schaefer Printing Machine e. K.
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 730 x 730 x 1000 mm<br/>description: - content consisting of: indexable inserts, dowel pins, sk 50 tool holders with tools (approx. 18 pieces) inclusive one heidenhain ts 220 measuring probe WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 730 X 730 X 1000 MM
DESCRIPTION: - CONTENT CONSISTING OF: INDEXABLE INSERTS, DOWEL PINS, SK 50 TOOL HOLDERS WITH TOOLS (APPROX. 18 PIECES) INCLUSIVE ONE HEIDENHAIN TS 220 MEASURING PROBE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-quick-action plate clamping bar
powder sprayer
plus version QUICK-ACTION PLATE CLAMPING BAR POWDER SPRAYER PLUS VERSION
Vendedor: Schaefer Printing Machine e. K.
Año de construcción: usado
Ubicación: Land-x-travel: 1.250 mm<br/>y-travel: 880 mm<br/>z-travel: 800 mm<br/>control: tnc 430  heidenhain<br/>main spindle::  <br/>turning speed range - main spindle: max. 12.000 min/-1<br/>power capacity - main spindel: 15 / 10 kw<br/>max. torque: 500 nm<br/>tool taper: sk 40 <br/>work table::  <br/>table surface area: 1.500 x 1.050 mm<br/>max. table load: 2.500 kg<br/>number of t-slots: 10 <br/>t-slot - width: 18 h7 mm<br/>t-slot - distance: 100 mm<br/>tool-presetter::  <br/>number of toolpositions: 60 pos.<br/>max. tool diameter: 80 mm<br/>max. tool-dia with free toolbox: 160 mm<br/>max. tool length: 315 mm<br/>max. tool weight: 8 kg<br/>max. total weight: 100 kg<br/>feeds::  <br/>rapid traverse ( x / y / z ): 15 m/min<br/>feed speeds: 10.000 mm/min<br/>total power requirement: 29 kva<br/>weight of the machine ca.: 10,0 t<br/>dimensions of the machine ca.: 7,0 x 5,0 x 3,3 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>automatic tool changer:  <br/>elektr. hand wheel:  <br/>cnc - machining center vertical<br/>deckel maho - dmu 125 t<br/><br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 1.250 MM
Y-TRAVEL: 880 MM
Z-TRAVEL: 800 MM
CONTROL: TNC 430 HEIDENHAIN
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: MAX. 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 15 / 10 KW
MAX. TORQUE: 500 NM
TOOL TAPER: SK 40
WORK TABLE::
TABLE SURFACE AREA: 1.500 X 1.050 MM
MAX. TABLE LOAD: 2.500 KG
NUMBER OF T-SLOTS: 10
T-SLOT - WIDTH: 18 H7 MM
T-SLOT - DISTANCE: 100 MM
TOOL-PRESETTER::
NUMBER OF TOOLPOSITIONS: 60 POS.
MAX. TOOL DIAMETER: 80 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 160 MM
MAX. TOOL LENGTH: 315 MM
MAX. TOOL WEIGHT: 8 KG
MAX. TOTAL WEIGHT: 100 KG
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 15 M/MIN
FEED SPEEDS: 10.000 MM/MIN
TOTAL POWER REQUIREMENT: 29 KVA
WEIGHT OF THE MACHINE CA.: 10,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 5,0 X 3,3 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
AUTOMATIC TOOL CHANGER:
ELEKTR. HAND WHEEL:
CNC - MACHINING CENTER VERTICAL
DECKEL MAHO - DMU 125 T







Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-quick-action plate clamping
powder sprayer   QUICK-ACTION PLATE CLAMPING POWDER SPRAYER
Vendedor: Schaefer Printing Machine e. K.
Año de construcción: usado
Ubicación: Land-turning diameter: max. 420 mm<br/>turning length: max. 630 mm<br/>control: turn-plus  heidenhain<br/>greates pass round over bed: 570 mm<br/>swing dia. over traverse guideway: 420 mm<br/>axis stroke::  <br/>x-travel: 220 mm<br/>y-axis: +/-40 mm<br/>z-travel: 635 mm<br/>main spindle::  <br/>turning speed range - main spindle: 25 - 5.000 min/-1<br/>power capacity - main spindel: 21 kw<br/>max. torque: 240 nm<br/>max. chucking diameter: 250 mm<br/>spindle nose: 170h5 <br/>spindle bearing diameter: 120 mm<br/>spindle bore: 79 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: ( - ) mm<br/>c-axis: 0,04 °<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>number of driven toolspositions: 6 pos.<br/>power capacity - driven tool-stations: 1,4 kw<br/>tool taper: 30mm  din 69880<br/>tailstock::  <br/>diameter of quill: 80 mm<br/>tailstock: 550 mm<br/>taper of center: mk 4 <br/>clamping capacity: 1,5 kn<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 5,4 t<br/>dimensions of the machine ca.: 4,0 x 2,5 x 2,0 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>tailstock:  <br/>parts catcher:  <br/>bar feeder interface:  <br/>hydraulic system:  <br/>c-axis:  <br/>y-axis:  <br/>tool drive mechanisum:  <br/>turret:  <br/>cnc-turning- and millingcenter<br/>gildemeister - ctx 400 e<br/><br/>- tool-drive<br/>- c-axis<br/>- y-axis<br/>- tailstock<br/>- without chuck / without tools<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 420 MM
TURNING LENGTH: MAX. 630 MM
CONTROL: TURN-PLUS HEIDENHAIN
GREATES PASS ROUND OVER BED: 570 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 420 MM
AXIS STROKE::
X-TRAVEL: 220 MM
Y-AXIS: +/-40 MM
Z-TRAVEL: 635 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 25 - 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 21 KW
MAX. TORQUE: 240 NM
MAX. CHUCKING DIAMETER: 250 MM
SPINDLE NOSE: 170H5
SPINDLE BEARING DIAMETER: 120 MM
SPINDLE BORE: 79 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: ( - ) MM
C-AXIS: 0,04 °
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
POWER CAPACITY - DRIVEN TOOL-STATIONS: 1,4 KW
TOOL TAPER: 30MM DIN 69880
TAILSTOCK::
DIAMETER OF QUILL: 80 MM
TAILSTOCK: 550 MM
TAPER OF CENTER: MK 4
CLAMPING CAPACITY: 1,5 KN
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 5,4 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 2,5 X 2,0 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
TAILSTOCK:
PARTS CATCHER:
BAR FEEDER INTERFACE:
HYDRAULIC SYSTEM:
C-AXIS:
Y-AXIS:
TOOL DRIVE MECHANISUM:
TURRET:
CNC-TURNING- AND MILLINGCENTER
GILDEMEISTER - CTX 400 E

- TOOL-DRIVE
- C-AXIS
- Y-AXIS
- TAILSTOCK
- WITHOUT CHUCK / WITHOUT TOOLS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-varnkompac dampening
quick locking plate clamp
double sheet control: electrical
powder spray weko t 6
plus version         VARNKOMPAC DAMPENING QUICK LOCKING PLATE CLAMP DOUBLE SHEET CONTROL: ELECTRICAL POWDER SPRAY WEKO T 6 PLUS VERSION
Vendedor: Schaefer Printing Machine e. K.
Año de construcción: usado
Ubicación: Land-x-axis: 2000 mm<br/>y-axis: 1200 mm<br/>z-axis: 800 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc control heidenhain tnc430<br/>12-fold automatic tool changer<br/>electronical hand wheel<br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>verfahrweg x / x-travel    2000    mm<br/>verfahrweg y / y-travel    1200    mm<br/>verfahrweg z / z-travel    800    mm<br/>abstand spindelstirn ? tisch / distance between spindle nose - table    900    <br/>mm<br/>tischgröße / table size    2300 x 1600    mm<br/>werkzeugschaft / spindle taper    sk40    <br/>drehzahlbereich / spindle speed     30-18000    upm /rpm<br/>anzahl der werkzeugplätze / tool places in atc    12    <br/>eilgang / rapid feed    30    m/min<br/>antriebsleistung spindel 100% ed / drive capacity spindle 100% ed     21    kw<br/>gewicht der maschine ca. / weight ca.    20000    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> X-AXIS: 2000 MM
Y-AXIS: 1200 MM
Z-AXIS: 800 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROL HEIDENHAIN TNC430
12-FOLD AUTOMATIC TOOL CHANGER
ELECTRONICAL HAND WHEEL
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
VERFAHRWEG X / X-TRAVEL 2000 MM
VERFAHRWEG Y / Y-TRAVEL 1200 MM
VERFAHRWEG Z / Z-TRAVEL 800 MM
ABSTAND SPINDELSTIRN ? TISCH / DISTANCE BETWEEN SPINDLE NOSE - TABLE 900
MM
TISCHGRößE / TABLE SIZE 2300 X 1600 MM
WERKZEUGSCHAFT / SPINDLE TAPER SK40
DREHZAHLBEREICH / SPINDLE SPEED 30-18000 UPM /RPM
ANZAHL DER WERKZEUGPLäTZE / TOOL PLACES IN ATC 12
EILGANG / RAPID FEED 30 M/MIN
ANTRIEBSLEISTUNG SPINDEL 100% ED / DRIVE CAPACITY SPINDLE 100% ED 21 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 20000 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-control heidenhain... tnc 620
clamping table surface... 1800 x 700mm
x axis... 1600mm
y axis... 750mm
z axis... 900mm
maximum table load... 3000kg
iso 50
spindle speed... 0-4000 rpm
power of main engine... 20/30kw
magazine places... 24
feed... 10000mm / min
rapid traverse axis x... 16m / min
rapid traverse axis y... 16m / min
rapid traverse axis z... 12m / min
the weight of the machine... 13000kg

in very good condition, possible to try out under power.  CONTROL HEIDENHAIN... TNC 620 CLAMPING TABLE SURFACE... 1800 X 700MM X AXIS... 1600MM Y AXIS... 750MM Z AXIS... 900MM MAXIMUM TABLE LOAD... 3000KG ISO 50 SPINDLE SPEED... 0-4000 RPM POWER OF MAIN ENGINE... 20/30KW MAGAZINE PLACES... 24 FEED... 10000MM / MIN RAPID TRAVERSE AXIS X... 16M / MIN RAPID TRAVERSE AXIS Y... 16M / MIN RAPID TRAVERSE AXIS Z... 12M / MIN THE WEIGHT OF THE MACHINE... 13000KG IN VERY GOOD CONDITION, POSSIBLE TO TRY OUT UNDER POWER.
Vendedor: Herr Radek Procházka
Año de construcción: usado
Precio: used machinery auction RESALE 3.650 €
Ubicación: Land-weight approx.: 2400 kg<br/>dimensions (l x w x h) approx.: 2410 x 2695 x 2000 mm<br/>description: mikron wf 21 d toolroom mill<br> control: heidenhain tnc 355<br> travels x/y/z: 450/400/400 mm<br> table size: 800 x 460 mm<br> speed range: 40-4000 r/min<br> feeds: 2-3000 mm/min<br> rapid traverse x/y: 6000 mm/min<br> rapid traverse z 5000 mm/min<br> tool holder: iso 40<br> connected load: 8,7 kw<br> WEIGHT APPROX.: 2400 KG
DIMENSIONS (L X W X H) APPROX.: 2410 X 2695 X 2000 MM
DESCRIPTION: MIKRON WF 21 D TOOLROOM MILL
CONTROL: HEIDENHAIN TNC 355
TRAVELS X/Y/Z: 450/400/400 MM
TABLE SIZE: 800 X 460 MM
SPEED RANGE: 40-4000 R/MIN
FEEDS: 2-3000 MM/MIN
RAPID TRAVERSE X/Y: 6000 MM/MIN
RAPID TRAVERSE Z 5000 MM/MIN
TOOL HOLDER: ISO 40
CONNECTED LOAD: 8,7 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-used dmg dmu 50 evolution linear - 5 axis machining center universal
new spindle !!!

control heidenhain itnc 530

technical specifications:

travels
x-way 500 mm
y-way 450 mm
z-way 400 mm
swivel range b: 108 °
turning range c: 360 °
rapid traverse 24 m / min
feed force 4.8 kn
feed rate 1 - 24,000 mm / min
main spindle
speed ??range: 20 - 18,000 rpm
drive power: 35/25 kw
max. torque: 30 nm
table clamping surface 500 x 380 mm
max. table load 200 kg
t-slots 5x 14 x 63 mm
tools
number of tool positions 30 pos. USED DMG DMU 50 EVOLUTION LINEAR - 5 AXIS MACHINING CENTER UNIVERSAL NEW SPINDLE !!! CONTROL HEIDENHAIN ITNC 530 TECHNICAL SPECIFICATIONS: TRAVELS X-WAY 500 MM Y-WAY 450 MM Z-WAY 400 MM SWIVEL RANGE B: 108 ° TURNING RANGE C: 360 ° RAPID TRAVERSE 24 M / MIN FEED FORCE 4.8 KN FEED RATE 1 - 24,000 MM / MIN MAIN SPINDLE SPEED ??RANGE: 20 - 18,000 RPM DRIVE POWER: 35/25 KW MAX. TORQUE: 30 NM TABLE CLAMPING SURFACE 500 X 380 MM MAX. TABLE LOAD 200 KG T-SLOTS 5X 14 X 63 MM TOOLS NUMBER OF TOOL POSITIONS 30 POS.
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 2200 kg<br/>dimensions (l x w x h) approx.: 2900 x 2650 x 2000 mm<br/>description: mikron wf 21 c toolroom mill<br> control: heidenhain tnc 155(contouring control)<br> travels x/y/z: 400/400/400 mm<br> table size: 700 x 350 mm<br> speed range: 31-3150 r/min<br> feeds: 2-3000 mm/min<br> rapid traverse x/y: 6000 mm/min<br> rapid traverse z 5000 mm/min<br> tool holder: iso 40<br> connected load: 8,7 kw<br> WEIGHT APPROX.: 2200 KG
DIMENSIONS (L X W X H) APPROX.: 2900 X 2650 X 2000 MM
DESCRIPTION: MIKRON WF 21 C TOOLROOM MILL
CONTROL: HEIDENHAIN TNC 155(CONTOURING CONTROL)
TRAVELS X/Y/Z: 400/400/400 MM
TABLE SIZE: 700 X 350 MM
SPEED RANGE: 31-3150 R/MIN
FEEDS: 2-3000 MM/MIN
RAPID TRAVERSE X/Y: 6000 MM/MIN
RAPID TRAVERSE Z 5000 MM/MIN
TOOL HOLDER: ISO 40
CONNECTED LOAD: 8,7 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general information:
control heidenhain tnc620
traverse paths x 760 mm y 460 mm z 460 mm
hours of operation 23.798 h

workspace:
min. distance of spindle nose 120 mm
maximum distance spindle nose 580 mm

axes:
feed / rapid traverse 36 m / min

spindle:
maximum speed 12,000 rpm
chuck sk40

tool magazine:
number of tool stations 32
maximum tool length 300 mm
maximum tool weight 7 kg

dimensions and weight:
2,590 mm x 1,700 mm x 2,825 mm weight approx. 4,000 kg GENERAL INFORMATION: CONTROL HEIDENHAIN TNC620 TRAVERSE PATHS X 760 MM Y 460 MM Z 460 MM HOURS OF OPERATION 23.798 H WORKSPACE: MIN. DISTANCE OF SPINDLE NOSE 120 MM MAXIMUM DISTANCE SPINDLE NOSE 580 MM AXES: FEED / RAPID TRAVERSE 36 M / MIN SPINDLE: MAXIMUM SPEED 12,000 RPM CHUCK SK40 TOOL MAGAZINE: NUMBER OF TOOL STATIONS 32 MAXIMUM TOOL LENGTH 300 MM MAXIMUM TOOL WEIGHT 7 KG DIMENSIONS AND WEIGHT: 2,590 MM X 1,700 MM X 2,825 MM WEIGHT APPROX. 4,000 KG
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: Land-weight approx.: 8570 kg<br/>dimensions (l x w x h) approx.: 4950 x 2240 x 2450 mm<br/>description: fabrication no. 2376, working spindle diameter 105 mm, milling spindle holder iso 60, drilling spindle holder iso 50, table travel x 800 mm, y 800 mm, z 1500 mm, quill stroke 500 mm, distance between spindle centre and clamping surface from 0 up to 800 mm, table 1000 x 850 mm, feed rates from 0,03 up to 6 mm/r, spindle speed from 3,2 up to 1500 rpm, facing slide and 4-axis-digital read out heidenhain for x, y, z and facing slide, separate control cabinet, size: 820 x 400 x 1850 mm, coolant unit, machine light, large german documentation. for further data, please refer to the copy of the machine card and a leafelet attached as pdf. WEIGHT APPROX.: 8570 KG
DIMENSIONS (L X W X H) APPROX.: 4950 X 2240 X 2450 MM
DESCRIPTION: FABRICATION NO. 2376, WORKING SPINDLE DIAMETER 105 MM, MILLING SPINDLE HOLDER ISO 60, DRILLING SPINDLE HOLDER ISO 50, TABLE TRAVEL X 800 MM, Y 800 MM, Z 1500 MM, QUILL STROKE 500 MM, DISTANCE BETWEEN SPINDLE CENTRE AND CLAMPING SURFACE FROM 0 UP TO 800 MM, TABLE 1000 X 850 MM, FEED RATES FROM 0,03 UP TO 6 MM/R, SPINDLE SPEED FROM 3,2 UP TO 1500 RPM, FACING SLIDE AND 4-AXIS-DIGITAL READ OUT HEIDENHAIN FOR X, Y, Z AND FACING SLIDE, SEPARATE CONTROL CABINET, SIZE: 820 X 400 X 1850 MM, COOLANT UNIT, MACHINE LIGHT, LARGE GERMAN DOCUMENTATION. FOR FURTHER DATA, PLEASE REFER TO THE COPY OF THE MACHINE CARD AND A LEAFELET ATTACHED AS PDF.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tool room milling machine lid fp4m
07-07-237
shipping time: immediately

number: 07-07-237

manufacturer: lid
type: fp 4 m

machine data
construction year: ca 1988
l x w x h: ca. 2300 x 1800 x 1800 mm
weight: 1750 kg

very good condition

technical data
digital display: 3 - axle digital display heidenhain

procedures:
x - axis: 500 mm
y - axis: 400 mm
z - axis: 400 mm

table size: approx. 700 x 400 mm

spindle:
speed range: approx. 50-2500 rpm

spindle taper: iso 40

power: approx. 6,0 kw

feeds & express ducts: in all 3 axes

feed range: approx. 8-630 mm / min

speed: approx. 3.0 m / min

accessories
â?¢ vertical & horizontal - trimmer
â?¢ angle milling head
â?¢ drilling tailstock (stroke: 120 mm)
â?¢ coolant system
â?¢ complete machine documentation
â?¢ various wrenches
â?¢ horizontal - spindle cap
â?¢ safety handwheels
â?¢ central lubrication
â?¢ emergency
â?¢ tiltable control panel
â?¢ spindle brake

other accessories on request
price and other specifications on request TOOL ROOM MILLING MACHINE LID FP4M 07-07-237 SHIPPING TIME: IMMEDIATELY NUMBER: 07-07-237 MANUFACTURER: LID TYPE: FP 4 M MACHINE DATA CONSTRUCTION YEAR: CA 1988 L X W X H: CA. 2300 X 1800 X 1800 MM WEIGHT: 1750 KG VERY GOOD CONDITION TECHNICAL DATA DIGITAL DISPLAY: 3 - AXLE DIGITAL DISPLAY HEIDENHAIN PROCEDURES: X - AXIS: 500 MM Y - AXIS: 400 MM Z - AXIS: 400 MM TABLE SIZE: APPROX. 700 X 400 MM SPINDLE: SPEED RANGE: APPROX. 50-2500 RPM SPINDLE TAPER: ISO 40 POWER: APPROX. 6,0 KW FEEDS & EXPRESS DUCTS: IN ALL 3 AXES FEED RANGE: APPROX. 8-630 MM / MIN SPEED: APPROX. 3.0 M / MIN ACCESSORIES &ACIRC;?&CENT; VERTICAL & HORIZONTAL - TRIMMER &ACIRC;?&CENT; ANGLE MILLING HEAD &ACIRC;?&CENT; DRILLING TAILSTOCK (STROKE: 120 MM) &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; HORIZONTAL - SPINDLE CAP &ACIRC;?&CENT; SAFETY HANDWHEELS &ACIRC;?&CENT; CENTRAL LUBRICATION &ACIRC;?&CENT; EMERGENCY &ACIRC;?&CENT; TILTABLE CONTROL PANEL &ACIRC;?&CENT; SPINDLE BRAKE OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-weight approx.: 3800 kg<br/>dimensions (l x w x h) approx.: 4000 x 1525 x 1750 mm<br/>description: centre height over flat track 240 mm, max. swing diameter over bed 500 mm, over support 285 mm, bed witdth 360 mm, distance between centres 1500 mm, spindle head according to din 5527 size 6, spindle diameter at front bearing 100 mm, diameter of spindle bore 62 mm, 24 spindle speed from 11,2 up to 2240 rpm, 60 longitudinal feeds from 0,06 up to 56 mm/r, 60 cross feeds from 0,03 up to 28 mm/r, 60 metrical thread pitches from 0,25 up to 224 mm, 60 zoll threads from 112 up to 0,125 gears to 1, 1 fixed and 1 rotating steady rest, opening of fixed steady rest approx. 120 mm, 1 pallet of accessories, 25 multifix quick-change steel holder inserts, 6 sets of jaws, mainly base jaws and soft top jaws, digital read out heidenhain for multifix ground holder size b, clamping device protection, chip protection wall, central lubrication, machine light, 3-jaw chuck forkardt f 315, german documentation WEIGHT APPROX.: 3800 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 1525 X 1750 MM
DESCRIPTION: CENTRE HEIGHT OVER FLAT TRACK 240 MM, MAX. SWING DIAMETER OVER BED 500 MM, OVER SUPPORT 285 MM, BED WITDTH 360 MM, DISTANCE BETWEEN CENTRES 1500 MM, SPINDLE HEAD ACCORDING TO DIN 5527 SIZE 6, SPINDLE DIAMETER AT FRONT BEARING 100 MM, DIAMETER OF SPINDLE BORE 62 MM, 24 SPINDLE SPEED FROM 11,2 UP TO 2240 RPM, 60 LONGITUDINAL FEEDS FROM 0,06 UP TO 56 MM/R, 60 CROSS FEEDS FROM 0,03 UP TO 28 MM/R, 60 METRICAL THREAD PITCHES FROM 0,25 UP TO 224 MM, 60 ZOLL THREADS FROM 112 UP TO 0,125 GEARS TO 1, 1 FIXED AND 1 ROTATING STEADY REST, OPENING OF FIXED STEADY REST APPROX. 120 MM, 1 PALLET OF ACCESSORIES, 25 MULTIFIX QUICK-CHANGE STEEL HOLDER INSERTS, 6 SETS OF JAWS, MAINLY BASE JAWS AND SOFT TOP JAWS, DIGITAL READ OUT HEIDENHAIN FOR MULTIFIX GROUND HOLDER SIZE B, CLAMPING DEVICE PROTECTION, CHIP PROTECTION WALL, CENTRAL LUBRICATION, MACHINE LIGHT, 3-JAW CHUCK FORKARDT F 315, GERMAN DOCUMENTATION
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tool room milling machine cover fp 4
mk 07-07-224
shipping time: immediately

number: 07-07-224

manufacturer: lid
type: fp 4 mk

machine data
construction year: ca 1994
l x w x h: ca. 2300 x 1800 x 1800 mm
weight: 1750 kg

very good condition

figure similar!

technical data
digital display: 3 - axes - active - digital display heidenhain

procedures:
x - axis: 500 mm
y - axis: 400 mm
z - axis: 400 mm
table size: approx. 700 x 400 mm

spindle:
speed range: approx. 50-2500 rpm

spindle taper: iso 40

power: approx. 6,0 kw

tool clamping: automatically

feeds & express ducts: in all 3 axes

feed range: approx. 8-630 mm / min

speed: approx. 3.0 m / min

accessories
â?¢ vertical & horizontal - trimmer
â?¢ angle milling head
â?¢ drilling tailstock (stroke: 120 mm)
â?¢ coolant system
â?¢ complete machine documentation
â?¢ various wrenches
â?¢ horizontal - spindle cap
â?¢ safety handwheels
â?¢ central lubrication
â?¢ emergency
â?¢ tiltable control panel
â?¢ spindle brake

other accessories on request
price and other specifications on request TOOL ROOM MILLING MACHINE COVER FP 4 MK 07-07-224 SHIPPING TIME: IMMEDIATELY NUMBER: 07-07-224 MANUFACTURER: LID TYPE: FP 4 MK MACHINE DATA CONSTRUCTION YEAR: CA 1994 L X W X H: CA. 2300 X 1800 X 1800 MM WEIGHT: 1750 KG VERY GOOD CONDITION FIGURE SIMILAR! TECHNICAL DATA DIGITAL DISPLAY: 3 - AXES - ACTIVE - DIGITAL DISPLAY HEIDENHAIN PROCEDURES: X - AXIS: 500 MM Y - AXIS: 400 MM Z - AXIS: 400 MM TABLE SIZE: APPROX. 700 X 400 MM SPINDLE: SPEED RANGE: APPROX. 50-2500 RPM SPINDLE TAPER: ISO 40 POWER: APPROX. 6,0 KW TOOL CLAMPING: AUTOMATICALLY FEEDS & EXPRESS DUCTS: IN ALL 3 AXES FEED RANGE: APPROX. 8-630 MM / MIN SPEED: APPROX. 3.0 M / MIN ACCESSORIES &ACIRC;?&CENT; VERTICAL & HORIZONTAL - TRIMMER &ACIRC;?&CENT; ANGLE MILLING HEAD &ACIRC;?&CENT; DRILLING TAILSTOCK (STROKE: 120 MM) &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; HORIZONTAL - SPINDLE CAP &ACIRC;?&CENT; SAFETY HANDWHEELS &ACIRC;?&CENT; CENTRAL LUBRICATION &ACIRC;?&CENT; EMERGENCY &ACIRC;?&CENT; TILTABLE CONTROL PANEL &ACIRC;?&CENT; SPINDLE BRAKE OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-weight approx.: 7300 kg<br/>dimensions (l x w x h) approx.: 5000 x 2800 x 2550 mm<br/>description: swing diameter over bed 840 mm, over support 515 mm, turning diameter at gap 900 mm, centre height 400 mm, centre length 2000 mm, 24 main spindle speeds from 7,1 up to 1400 rpm, spindle bore 100 mm, with forkardt 3-jaw chuck f 400 and several jaws, 4-fold steel holder, coolant unit, machine light, foldable chuck protection, live centre, face plate 800 mm diameter with additional jaws, heidenhain digital read out for longitudinal and cross axis, drive power 22 kw, with large set of clamping jaws, with documentation WEIGHT APPROX.: 7300 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2800 X 2550 MM
DESCRIPTION: SWING DIAMETER OVER BED 840 MM, OVER SUPPORT 515 MM, TURNING DIAMETER AT GAP 900 MM, CENTRE HEIGHT 400 MM, CENTRE LENGTH 2000 MM, 24 MAIN SPINDLE SPEEDS FROM 7,1 UP TO 1400 RPM, SPINDLE BORE 100 MM, WITH FORKARDT 3-JAW CHUCK F 400 AND SEVERAL JAWS, 4-FOLD STEEL HOLDER, COOLANT UNIT, MACHINE LIGHT, FOLDABLE CHUCK PROTECTION, LIVE CENTRE, FACE PLATE 800 MM DIAMETER WITH ADDITIONAL JAWS, HEIDENHAIN DIGITAL READ OUT FOR LONGITUDINAL AND CROSS AXIS, DRIVE POWER 22 KW, WITH LARGE SET OF CLAMPING JAWS, WITH DOCUMENTATION
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-* heidelberg cd 74-4 + l-c year of manufacture: 2006
print number: 65 million 
cp 2000 center
axis control
autoplate
alcolor
preset anlger + plus delivery
cpl. laundry facilities
xo delivery
ir-dryer
very good condition!
available now!
 * HEIDELBERG CD 74-4 + L-C YEAR OF MANUFACTURE: 2006 PRINT NUMBER: 65 MILLION CP 2000 CENTER AXIS CONTROL AUTOPLATE ALCOLOR PRESET ANLGER + PLUS DELIVERY CPL. LAUNDRY FACILITIES XO DELIVERY IR-DRYER VERY GOOD CONDITION! AVAILABLE NOW!
Vendedor: Bavarian graphics
Año de construcción: usado
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 5500 x 1400 x 1850 mm<br/>description: max. swing diameter over bed 480 mm, over bed slide 295 mm, spindle head according to din 55022 size 6, spindle bore 56 mm, tailstock taper mk 4, 90 up to 500 rpm, 5,5 kw, with inner thread-wirbelwhirling device burgsmÜller hw 1, 3-jaw chuck forkardt f 315, fixed steady rest for workpiece opening approx. 130 mm, machine light, rearward chip protection, rapid traverse, threading gauge, additional tool cabinet lista with 2 sliding doors, content of accessories for inner thread-whirling device, cabinet dimensions 1430 x 650 x 1100 mm, german documentation. for further data, please refer to the copy of the machine card attached as pdf. WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 5500 X 1400 X 1850 MM
DESCRIPTION: MAX. SWING DIAMETER OVER BED 480 MM, OVER BED SLIDE 295 MM, SPINDLE HEAD ACCORDING TO DIN 55022 SIZE 6, SPINDLE BORE 56 MM, TAILSTOCK TAPER MK 4, 90 UP TO 500 RPM, 5,5 KW, WITH INNER THREAD-WIRBELWHIRLING DEVICE BURGSMÜLLER HW 1, 3-JAW CHUCK FORKARDT F 315, FIXED STEADY REST FOR WORKPIECE OPENING APPROX. 130 MM, MACHINE LIGHT, REARWARD CHIP PROTECTION, RAPID TRAVERSE, THREADING GAUGE, ADDITIONAL TOOL CABINET LISTA WITH 2 SLIDING DOORS, CONTENT OF ACCESSORIES FOR INNER THREAD-WHIRLING DEVICE, CABINET DIMENSIONS 1430 X 650 X 1100 MM, GERMAN DOCUMENTATION. FOR FURTHER DATA, PLEASE REFER TO THE COPY OF THE MACHINE CARD ATTACHED AS PDF.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-* heidelberg cd 102-4 + lx
year of construction: 2008
print number: 130 million
prinect press center
wall screen
autoplate, alcolor vario, technotrans combi star
preset plus investors + delivery
ink unit temperature control
tresu paint factory
air star, dry star 3000m coating star,.
can wash star, static star
x 2 display (160cm)
1 x ir / dryer...
 * HEIDELBERG CD 102-4 + LX YEAR OF CONSTRUCTION: 2008 PRINT NUMBER: 130 MILLION PRINECT PRESS CENTER WALL SCREEN AUTOPLATE, ALCOLOR VARIO, TECHNOTRANS COMBI STAR PRESET PLUS INVESTORS + DELIVERY INK UNIT TEMPERATURE CONTROL TRESU PAINT FACTORY AIR STAR, DRY STAR 3000M COATING STAR,. CAN WASH STAR, STATIC STAR X 2 DISPLAY (160CM) 1 X IR / DRYER...
Vendedor: Bavarian graphics
Año de construcción: usado
Ubicación: Land-weight approx.: 10880 kg<br/>dimensions (l x w x h) approx.: 9580 x 1900 x 1800 mm<br/>description: fabrication no. 16464, swing diameter over bed 1015 mm, max. swing diameter over slide 780 mm, turning length 6000 mm, max. turning diameter at gap 1065 mm, spindle head according to din 55022 size 11, spindle bore 120 mm, tailstock taper mk 6, tailstock quill adjustment 325 mm, feed in upper support, face plate 950 mm, machine light, digital read out heidenhain for longitudinal- and cross axis, one fixed and one open steady rest, opening of fixed steady rest approx. 380 mm, 4-fold steel holder, 3,6 up to 1000 rpm, slide rapid traverse 3200 mm/min, 3-jaw chuck, diameter: 500 mm, wooden table dimensions: 800 x 850 x 900 mm with jaws, drill bar, german documentation. for further data, please refer to the copy of the machine card attached as pdf. WEIGHT APPROX.: 10880 KG
DIMENSIONS (L X W X H) APPROX.: 9580 X 1900 X 1800 MM
DESCRIPTION: FABRICATION NO. 16464, SWING DIAMETER OVER BED 1015 MM, MAX. SWING DIAMETER OVER SLIDE 780 MM, TURNING LENGTH 6000 MM, MAX. TURNING DIAMETER AT GAP 1065 MM, SPINDLE HEAD ACCORDING TO DIN 55022 SIZE 11, SPINDLE BORE 120 MM, TAILSTOCK TAPER MK 6, TAILSTOCK QUILL ADJUSTMENT 325 MM, FEED IN UPPER SUPPORT, FACE PLATE 950 MM, MACHINE LIGHT, DIGITAL READ OUT HEIDENHAIN FOR LONGITUDINAL- AND CROSS AXIS, ONE FIXED AND ONE OPEN STEADY REST, OPENING OF FIXED STEADY REST APPROX. 380 MM, 4-FOLD STEEL HOLDER, 3,6 UP TO 1000 RPM, SLIDE RAPID TRAVERSE 3200 MM/MIN, 3-JAW CHUCK, DIAMETER: 500 MM, WOODEN TABLE DIMENSIONS: 800 X 850 X 900 MM WITH JAWS, DRILL BAR, GERMAN DOCUMENTATION. FOR FURTHER DATA, PLEASE REFER TO THE COPY OF THE MACHINE CARD ATTACHED AS PDF.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 17.000 €
Ubicación: Land-ref. 226
heidelberg  mozp-h
format 48x65, year 1991, alcohol dampening, baldwin, weko, perfecting 1-1, cp tronic, high pile delivery, price: 17 000 eur fca
 REF. 226 HEIDELBERG MOZP-H FORMAT 48X65, YEAR 1991, ALCOHOL DAMPENING, BALDWIN, WEKO, PERFECTING 1-1, CP TRONIC, HIGH PILE DELIVERY, PRICE: 17 000 EUR FCA
Vendedor: TM Machinery
Año de construcción: usado
Ubicación: Land-weight approx.: 5200 kg<br/>dimensions (l x w x h) approx.: 3000 x 2950 x 2550 mm<br/>description: table clamping surface 400 x 1600 mm, max. table load 1600 kg, table movement longitudinal 1170 mm, cross 510 mm, vertical 400 mm, tool holder iso 50 (tgl 7836), max. cutter head diameter 315 mm, 18 main spindle speeds from 45 up to 2240 rpm, feet rates continuously longitudinal and cross 3 up to 2000 mm/min, vertical 1,5 up to 1000 mm/min, rapid traverse longitudinal and cross 10000 mm/min, vertical 5000 mm/min, with point- and linear control heidenhain tnc 131, lateral slewable vertical milling head, counter holder for horizontal milling, machine light, swivel arm for vertical milling head and german documentation for machine and control system, 2 tool cabinets, 1 x with 2 sliding doors, each 1440 x 800 x 1030 mm, each with 7 and 8 drawers WEIGHT APPROX.: 5200 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2950 X 2550 MM
DESCRIPTION: TABLE CLAMPING SURFACE 400 X 1600 MM, MAX. TABLE LOAD 1600 KG, TABLE MOVEMENT LONGITUDINAL 1170 MM, CROSS 510 MM, VERTICAL 400 MM, TOOL HOLDER ISO 50 (TGL 7836), MAX. CUTTER HEAD DIAMETER 315 MM, 18 MAIN SPINDLE SPEEDS FROM 45 UP TO 2240 RPM, FEET RATES CONTINUOUSLY LONGITUDINAL AND CROSS 3 UP TO 2000 MM/MIN, VERTICAL 1,5 UP TO 1000 MM/MIN, RAPID TRAVERSE LONGITUDINAL AND CROSS 10000 MM/MIN, VERTICAL 5000 MM/MIN, WITH POINT- AND LINEAR CONTROL HEIDENHAIN TNC 131, LATERAL SLEWABLE VERTICAL MILLING HEAD, COUNTER HOLDER FOR HORIZONTAL MILLING, MACHINE LIGHT, SWIVEL ARM FOR VERTICAL MILLING HEAD AND GERMAN DOCUMENTATION FOR MACHINE AND CONTROL SYSTEM, 2 TOOL CABINETS, 1 X WITH 2 SLIDING DOORS, EACH 1440 X 800 X 1030 MM, EACH WITH 7 AND 8 DRAWERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mcfv 100, vertical machining center 3 axes

brand spas
model mcfv 100
date of construction: 1996 - nb. hours: 20412
digital control: heidenhain tnc 407
races: x: 1020 mm / y: 600 mm / z: 635 mm x/y/z advances speed: 0 - 8000 mm/min
rapids 30 m/min
table: 1270 x 605 mm
maximum load: 900 kg
spindle taper: iso 40 spindle max speed: 8000 u/min spindle motor power: 11 kw
tool changers: 2 x 20 slots
the 8000 kg machine mass
floor space: 2700 x 2215 mm

features without visible - available unless sold - commitment in operation by appointment
 MCFV 100, VERTICAL MACHINING CENTER 3 AXES BRAND SPAS MODEL MCFV 100 DATE OF CONSTRUCTION: 1996 - NB. HOURS: 20412 DIGITAL CONTROL: HEIDENHAIN TNC 407 RACES: X: 1020 MM / Y: 600 MM / Z: 635 MM X/Y/Z ADVANCES SPEED: 0 - 8000 MM/MIN RAPIDS 30 M/MIN TABLE: 1270 X 605 MM MAXIMUM LOAD: 900 KG SPINDLE TAPER: ISO 40 SPINDLE MAX SPEED: 8000 U/MIN SPINDLE MOTOR POWER: 11 KW TOOL CHANGERS: 2 X 20 SLOTS THE 8000 KG MACHINE MASS FLOOR SPACE: 2700 X 2215 MM FEATURES WITHOUT VISIBLE - AVAILABLE UNLESS SOLD - COMMITMENT IN OPERATION BY APPOINTMENT
Vendedor: ETS AMANN SARL
Año de construcción: usado
Ubicación: Land-x-travel:1800 mm<br/>y-travel:2000 mm<br/>z-travel:1100 mm<br/>table-size:d 1700 x 1400 mm<br/>table load capacity:5000 kg<br/>tool taper:sk 50 <br/>spindle drive:30 / 20 kw<br/>turning speed range - stepless:8000 1/min<br/>numbers of positions in the tool changer:60 <br/>control:tnc 430 heidenhain <br/>weight of the machine ca.:39 t<br/>transport dimensions lxwxh:ca. 6 x 3,4 x 3,4 m<br/>space requirements approx. lxwxh:8,5 x 9,5 x 4,2 m<br/><br/>5-axis cnc universal maching center, simultaneously, nc-rotary table 1.700 x 1.400mm (360000 x 0,001° indexing), universal milling head with controlled b-axis (0,001°), mode 4 automaticaly changing  hsc - spindle with tool taper hsk 32  3d probe infrared heidenhain, chipconveyor, blum-laser, flush-gun, oilmist suction, upgraded with internal coolant supply, price without is eur 249.000,--,  approx. 88.500h \ X-TRAVEL:1800 MM
Y-TRAVEL:2000 MM
Z-TRAVEL:1100 MM
TABLE-SIZE:D 1700 X 1400 MM
TABLE LOAD CAPACITY:5000 KG
TOOL TAPER:SK 50
SPINDLE DRIVE:30 / 20 KW
TURNING SPEED RANGE - STEPLESS:8000 1/MIN
NUMBERS OF POSITIONS IN THE TOOL CHANGER:60
CONTROL:TNC 430 HEIDENHAIN
WEIGHT OF THE MACHINE CA.:39 T
TRANSPORT DIMENSIONS LXWXH:CA. 6 X 3,4 X 3,4 M
SPACE REQUIREMENTS APPROX. LXWXH:8,5 X 9,5 X 4,2 M

5-AXIS CNC UNIVERSAL MACHING CENTER, SIMULTANEOUSLY, NC-ROTARY TABLE 1.700 X 1.400MM (360000 X 0,001° INDEXING), UNIVERSAL MILLING HEAD WITH CONTROLLED B-AXIS (0,001°), MODE 4 AUTOMATICALY CHANGING HSC - SPINDLE WITH TOOL TAPER HSK 32 3D PROBE INFRARED HEIDENHAIN, CHIPCONVEYOR, BLUM-LASER, FLUSH-GUN, OILMIST SUCTION, UPGRADED WITH INTERNAL COOLANT SUPPLY, PRICE WITHOUT IS EUR 249.000,--, APPROX. 88.500H \"MACHINE ON\", APPROX. 39.300H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-tos trencin mc 100 v specifications machining center:
year of construction: 1997
control heidenhain tnc 410
x × y × z racing: 1016 x 610 x 508 [mm]
the table surface: 1100 x 600 [mm]
spindle cones: iso 40 tool magazine: 40 tools
spindle speed: 8000 rpm
dimensions of the machine: 2260 x 3280 x 2400 mm
group of irrigation with filtration paper
mass of the machine: 6000 kg

price: consult us. 
machine visible on features - available unless sold - appointment without commitment.
 TOS TRENCIN MC 100 V SPECIFICATIONS MACHINING CENTER: YEAR OF CONSTRUCTION: 1997 CONTROL HEIDENHAIN TNC 410 X × Y × Z RACING: 1016 X 610 X 508 [MM] THE TABLE SURFACE: 1100 X 600 [MM] SPINDLE CONES: ISO 40 TOOL MAGAZINE: 40 TOOLS SPINDLE SPEED: 8000 RPM DIMENSIONS OF THE MACHINE: 2260 X 3280 X 2400 MM GROUP OF IRRIGATION WITH FILTRATION PAPER MASS OF THE MACHINE: 6000 KG PRICE: CONSULT US. MACHINE VISIBLE ON FEATURES - AVAILABLE UNLESS SOLD - APPOINTMENT WITHOUT COMMITMENT.
Vendedor: ETS AMANN SARL
Año de construcción: usado
Ubicación: Land-x-travel:3000 mm<br/>y-travel:800 mm<br/>z-travel:600 mm<br/>:800 mm<br/>working area:800x1770 mm<br/>:970 mm<br/>distance spindle nose and table:110 mm<br/>table load:1200 kg<br/>spindle taper:40 bt/sk<br/>spindle speeds:15.000 1/min<br/>spindle drive:33 kw<br/>addendum angle max.:120 grad<br/>rapid speed:12/24/24/24 m/min<br/>feed range:1 - 10000 mm/min<br/>tool piece magazine with:24 stk.<br/>diameter of tools max.:150 mm mm<br/>workpiece length:300 mm<br/>weight of tools max.:7 kg<br/>positioning accuracy:± 0.001 mm<br/>repeatability:± 0.001 mm<br/>tool changing time:2,5 sec<br/>coolant capacity:550 l<br/>:rollentyp, linearführungen <br/>base area:7200x3900x3200 mm<br/>cnc controller:heidenhain tnc- 620 <br/>:cnc gesteuert <br/>: <br/>automatically power off:m30 <br/>: <br/>automatic lubrication system: <br/>: <br/>rigid tapping: <br/>heat exchanger for electr. cabinet: <br/>: <br/>tool box:mit hilfswerkzeugen <br/>atc:24 pos fach<br/>chip conveyor - auger:auf der rückseite des tisches <br/>leveling elements: <br/>ce-design: <br/>: <br/>complete cooling system: <br/>workshop light: <br/>: <br/>alarm stack light:3-farbig <br/>: <br/>: <br/>electric 400v, 50 hz, 3 phases: <br/>:20 bar<br/>atc:30  fach<br/>: <br/>: <br/>chip conveyor and trolley: <br/>: <br/>: <br/>cnc controls from:siemens <br/>tool measuring system:renishaw ts-27r  <br/>:sowie 2 tage schulung <br/><br/>traveling column 5 axis machining center X-TRAVEL:3000 MM
Y-TRAVEL:800 MM
Z-TRAVEL:600 MM
:800 MM
WORKING AREA:800X1770 MM
:970 MM
DISTANCE SPINDLE NOSE AND TABLE:110 MM
TABLE LOAD:1200 KG
SPINDLE TAPER:40 BT/SK
SPINDLE SPEEDS:15.000 1/MIN
SPINDLE DRIVE:33 KW
ADDENDUM ANGLE MAX.:120 GRAD
RAPID SPEED:12/24/24/24 M/MIN
FEED RANGE:1 - 10000 MM/MIN
TOOL PIECE MAGAZINE WITH:24 STK.
DIAMETER OF TOOLS MAX.:150 MM MM
WORKPIECE LENGTH:300 MM
WEIGHT OF TOOLS MAX.:7 KG
POSITIONING ACCURACY:± 0.001 MM
REPEATABILITY:± 0.001 MM
TOOL CHANGING TIME:2,5 SEC
COOLANT CAPACITY:550 L
:ROLLENTYP, LINEARFüHRUNGEN
BASE AREA:7200X3900X3200 MM
CNC CONTROLLER:HEIDENHAIN TNC- 620
:CNC GESTEUERT
:
AUTOMATICALLY POWER OFF:M30
:
AUTOMATIC LUBRICATION SYSTEM:
:
RIGID TAPPING:
HEAT EXCHANGER FOR ELECTR. CABINET:
:
TOOL BOX:MIT HILFSWERKZEUGEN
ATC:24 POS FACH
CHIP CONVEYOR - AUGER:AUF DER RüCKSEITE DES TISCHES
LEVELING ELEMENTS:
CE-DESIGN:
:
COMPLETE COOLING SYSTEM:
WORKSHOP LIGHT:
:
ALARM STACK LIGHT:3-FARBIG
:
:
ELECTRIC 400V, 50 HZ, 3 PHASES:
:20 BAR
ATC:30 FACH
:
:
CHIP CONVEYOR AND TROLLEY:
:
:
CNC CONTROLS FROM:SIEMENS
TOOL MEASURING SYSTEM:RENISHAW TS-27R
:SOWIE 2 TAGE SCHULUNG

TRAVELING COLUMN 5 AXIS MACHINING CENTER
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-table size 2500x800 mm
x travel 2500 mm
y travel 800 mm
z travel 800 mm
spindle taper bt50
max spindle speed 2500 rpm
controller heidenhain tnc-426 d TABLE SIZE 2500X800 MM X TRAVEL 2500 MM Y TRAVEL 800 MM Z TRAVEL 800 MM SPINDLE TAPER BT50 MAX SPINDLE SPEED 2500 RPM CONTROLLER HEIDENHAIN TNC-426 D
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-x-travel:315 mm<br/>y-travel:180 mm<br/>z-travel:320 mm<br/>table surface area:600 x 250 mm<br/>spindle taper mt:40 sk <br/>feed:10 - 470 mm/min<br/>total power requirement:5,1 kw<br/>quill stroke:60,0 mm<br/>speeds:45 - 1950 u/min<br/>weight of the machine ca.:1,3 t<br/>dimensions of the machine ca.:1 x 1,4 x 1,8 m<br/><br/>* cnc control by dr. heidenhain tnc 355 * machine was used only for demonstration in a school X-TRAVEL:315 MM
Y-TRAVEL:180 MM
Z-TRAVEL:320 MM
TABLE SURFACE AREA:600 X 250 MM
SPINDLE TAPER MT:40 SK
FEED:10 - 470 MM/MIN
TOTAL POWER REQUIREMENT:5,1 KW
QUILL STROKE:60,0 MM
SPEEDS:45 - 1950 U/MIN
WEIGHT OF THE MACHINE CA.:1,3 T
DIMENSIONS OF THE MACHINE CA.:1 X 1,4 X 1,8 M

* CNC CONTROL BY DR. HEIDENHAIN TNC 355 * MACHINE WAS USED ONLY FOR DEMONSTRATION IN A SCHOOL
Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-moving column milling factory eumach 5-axis

make: eumach
type: tvmc - 2000-5 xc
b: 2013/14
control: heidenhain 530 i - option 2 x: 2320 mm
y: 770 mm
z: 770 mm
b: +/-120â°
(a). 360 x 0.001 (round table, 500 mm) drive: 36 kw
spindle: bt 40 speed: 14 000 rpm
magazine: 50 x

ancillary equipment

laser tool breakage renishaw probe rmp 60
glass scales xyz ikz 20 bar
chip conveyor
weight machine: 22 000 kg  
 MOVING COLUMN MILLING FACTORY EUMACH 5-AXIS MAKE: EUMACH TYPE: TVMC - 2000-5 XC B: 2013/14 CONTROL: HEIDENHAIN 530 I - OPTION 2 X: 2320 MM Y: 770 MM Z: 770 MM B: +/-120&ACIRC;&DEG; (A). 360 X 0.001 (ROUND TABLE, 500 MM) DRIVE: 36 KW SPINDLE: BT 40 SPEED: 14 000 RPM MAGAZINE: 50 X ANCILLARY EQUIPMENT LASER TOOL BREAKAGE RENISHAW PROBE RMP 60 GLASS SCALES XYZ IKZ 20 BAR CHIP CONVEYOR WEIGHT MACHINE: 22 000 KG
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Ubicación: Land-travel -x axis: 700 mm<br/>travel -y axis: 660 mm<br/>travel -z axis: 480 mm<br/>control: heidenhain itnc 530 <br/>spindle speed max.: 15.000 min -1<br/>spindle taper: sk 40 <br/>tool piece magazine with: 48 <br/>weight of the machine ca.: 10 t<br/>5-axis simultaneous machining center quaser mv204cu<br/><br/>accessories:<br/><br/>- miscellaneous tool holders<br/>- probe<br/><br/><br/><br/><br/> TRAVEL -X AXIS: 700 MM
TRAVEL -Y AXIS: 660 MM
TRAVEL -Z AXIS: 480 MM
CONTROL: HEIDENHAIN ITNC 530
SPINDLE SPEED MAX.: 15.000 MIN -1
SPINDLE TAPER: SK 40
TOOL PIECE MAGAZINE WITH: 48
WEIGHT OF THE MACHINE CA.: 10 T
5-AXIS SIMULTANEOUS MACHINING CENTER QUASER MV204CU

ACCESSORIES:

- MISCELLANEOUS TOOL HOLDERS
- PROBE




Vendedor: STEINHAND GmbH
Año de construcción: usado
Ubicación: Land-control heidenhain type tnc355, travels x / y / z 710 x 500 x 400 mm, tool holder type sk40
de:
cnc-universal-fräsmaschine, fabr. micron, typ wf510/tnc355, ser.-nr. 5511905, steuerung, fabr. heidenhain, typ tnc355, verfahrwege x/y/z 710 x 500 x 400 mm, werkzeugaufnahme, typ sk4
 CONTROL HEIDENHAIN TYPE TNC355, TRAVELS X / Y / Z 710 X 500 X 400 MM, TOOL HOLDER TYPE SK40 DE: CNC-UNIVERSAL-FRäSMASCHINE, FABR. MICRON, TYP WF510/TNC355, SER.-NR. 5511905, STEUERUNG, FABR. HEIDENHAIN, TYP TNC355, VERFAHRWEGE X/Y/Z 710 X 500 X 400 MM, WERKZEUGAUFNAHME, TYP SK4
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 2700 x 2500 x 2500 mm<br/>description: - machine no.: 5322<br> - travel of x-axis: 1000 mm<br> - travel of y-axis: 600 mm<br> - travel of z-axis: 500 mm<br> - quill stroke: 63 mm<br> - distance between spindle centre and clamping surface min./max.: 60/560 mm<br> - max. workpiece weight: 630 kg<br> - clamping surface: 1300 x 700 mm<br> - number of t-slots: 7<br> - t-slot width: 18 mm<br> - distance between t-slots: 90 mm<br> - tool holder: sk 50<br> - spindle diameter: 100 mm<br> - max. torque value: 710 nm<br> - feed rate in all axes x/y/z: 2000 mm/min<br> - rapid travers in all axes x/y/z: 7 m/min<br> - max. feed force in all axes x/y/z: 12000 n<br> - with heidenhain tnc 355 cnc-path control system<br> - included in delivery is a big lot of machine accessories, consisting of three machine vices, three dividing attachments, several spare jaws as well as many sk 50 tool holders which are mainly equipped with tools. the exact range can not be specified. it is approx. 75 pieces<br> - the machine has to be picked up on 13th or 14th of may 2019 WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 2500 X 2500 MM
DESCRIPTION: - MACHINE NO.: 5322
- TRAVEL OF X-AXIS: 1000 MM
- TRAVEL OF Y-AXIS: 600 MM
- TRAVEL OF Z-AXIS: 500 MM
- QUILL STROKE: 63 MM
- DISTANCE BETWEEN SPINDLE CENTRE AND CLAMPING SURFACE MIN./MAX.: 60/560 MM
- MAX. WORKPIECE WEIGHT: 630 KG
- CLAMPING SURFACE: 1300 X 700 MM
- NUMBER OF T-SLOTS: 7
- T-SLOT WIDTH: 18 MM
- DISTANCE BETWEEN T-SLOTS: 90 MM
- TOOL HOLDER: SK 50
- SPINDLE DIAMETER: 100 MM
- MAX. TORQUE VALUE: 710 NM
- FEED RATE IN ALL AXES X/Y/Z: 2000 MM/MIN
- RAPID TRAVERS IN ALL AXES X/Y/Z: 7 M/MIN
- MAX. FEED FORCE IN ALL AXES X/Y/Z: 12000 N
- WITH HEIDENHAIN TNC 355 CNC-PATH CONTROL SYSTEM
- INCLUDED IN DELIVERY IS A BIG LOT OF MACHINE ACCESSORIES, CONSISTING OF THREE MACHINE VICES, THREE DIVIDING ATTACHMENTS, SEVERAL SPARE JAWS AS WELL AS MANY SK 50 TOOL HOLDERS WHICH ARE MAINLY EQUIPPED WITH TOOLS. THE EXACT RANGE CAN NOT BE SPECIFIED. IT IS APPROX. 75 PIECES
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR 14TH OF MAY 2019
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-center height / width 230 x 1,000 mm, digital axis plc, manufacture heidenhain, storage shelf incl. content
de:
  CENTER HEIGHT / WIDTH 230 X 1,000 MM, DIGITAL AXIS PLC, MANUFACTURE HEIDENHAIN, STORAGE SHELF INCL. CONTENT DE:
Vendedor: Hilco
Año de construcción: usado
Precio: used machinery auction RESALE 2.800 €
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 8000 x 2450 x 2500 mm<br/>description: koch bl 51 nc 36/5000 drilling center was rebuilt in 2013 and equipped with new heidenhain controls.<br> <br> the machine was used in a door production for the processing of block frames.<br> <br> - workpiece length max. approx. 4800 mm<br> - workpiece thickness max. approx. 100 mm<br> <br> - 4 drills horizontal: 1 drill fixed, 3 drills 7 - 9 ° adjustable<br> - 3 cutters horizontally<br> - 3 cutters vertical<br> - 1 feeler unit<br> - left / right run.<br> <br> assembly size: length 8000 mm / width 3500 mm WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 2450 X 2500 MM
DESCRIPTION: KOCH BL 51 NC 36/5000 DRILLING CENTER WAS REBUILT IN 2013 AND EQUIPPED WITH NEW HEIDENHAIN CONTROLS.

THE MACHINE WAS USED IN A DOOR PRODUCTION FOR THE PROCESSING OF BLOCK FRAMES.

- WORKPIECE LENGTH MAX. APPROX. 4800 MM
- WORKPIECE THICKNESS MAX. APPROX. 100 MM

- 4 DRILLS HORIZONTAL: 1 DRILL FIXED, 3 DRILLS 7 - 9 ° ADJUSTABLE
- 3 CUTTERS HORIZONTALLY
- 3 CUTTERS VERTICAL
- 1 FEELER UNIT
- LEFT / RIGHT RUN.

ASSEMBLY SIZE: LENGTH 8000 MM / WIDTH 3500 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-easyplate

clasic centre

powder star ap 110

baldwin refrigeration device

auto washers

easyplate semi-automatic plate loading

weko powder sprayer
  EASYPLATE CLASIC CENTRE POWDER STAR AP 110 BALDWIN REFRIGERATION DEVICE AUTO WASHERS EASYPLATE SEMI-AUTOMATIC PLATE LOADING WEKO POWDER SPRAYER
Vendedor: 4print
Año de construcción: usado
Ubicación: Land-x-travel:500 mm<br/>y-travel:450 mm<br/>z-travel:400 mm<br/>turning speeds:20 -18.000 1/min<br/>control:siemens 840dsl shopmill <br/>tool change unit:30 pos.<br/>tool taper:hsk 63 <br/>rapid traverse:30 m/min<br/>spindle:25/35 kw<br/>torque:130 <br/>round-swivelling table:630 x 500 mm<br/>table load:200 / 300 kg<br/>total power requirement:31 kva<br/>weight of the machine ca.:4,5 t<br/>dimensions of the machine ca.:3,1 x 2,4 x 2,6 m<br/><br/>5-axis simultaneously machining center, nc-round-swivelling table -5 / +110°, touch probe infrared heidenhain ts 649, internal coolant supply 20 bar, airblast outside, el. handwheel, prepared for 3d quickset, no chipconveyor  approx. 25.000h \ X-TRAVEL:500 MM
Y-TRAVEL:450 MM
Z-TRAVEL:400 MM
TURNING SPEEDS:20 -18.000 1/MIN
CONTROL:SIEMENS 840DSL SHOPMILL
TOOL CHANGE UNIT:30 POS.
TOOL TAPER:HSK 63
RAPID TRAVERSE:30 M/MIN
SPINDLE:25/35 KW
TORQUE:130
ROUND-SWIVELLING TABLE:630 X 500 MM
TABLE LOAD:200 / 300 KG
TOTAL POWER REQUIREMENT:31 KVA
WEIGHT OF THE MACHINE CA.:4,5 T
DIMENSIONS OF THE MACHINE CA.:3,1 X 2,4 X 2,6 M

5-AXIS SIMULTANEOUSLY MACHINING CENTER, NC-ROUND-SWIVELLING TABLE -5 / +110°, TOUCH PROBE INFRARED HEIDENHAIN TS 649, INTERNAL COOLANT SUPPLY 20 BAR, AIRBLAST OUTSIDE, EL. HANDWHEEL, PREPARED FOR 3D QUICKSET, NO CHIPCONVEYOR APPROX. 25.000H \"MACHINE ON\", APPROX. 14.500H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-heidelberg cylinder s technical details of max. paper size 540x720 mm location europe complete and in working condition  HEIDELBERG CYLINDER S TECHNICAL DETAILS OF MAX. PAPER SIZE 540X720 MM LOCATION EUROPE COMPLETE AND IN WORKING CONDITION
Vendedor: Gutenberg Grafishe Machines B.V.
Año de construcción: usado
Ubicación: Land-size: 360 x 520 mm<br/>impression: 31 mio.<br/> <br/>equipments:<br/>plus version<br/>continuous-feed damping system SIZE: 360 X 520 MM
IMPRESSION: 31 MIO.

EQUIPMENTS:
PLUS VERSION
CONTINUOUS-FEED DAMPING SYSTEM
Vendedor: Graphische Okkasionen Karakus
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-x,y,z travel 635,510,460 mm
table size 790x560 mm
control unit heidenhain tnc620
spindle speed 8000 rpm
spindle taper sk40
number of tools in magazine 20
power on time 31.000 h
spindle running time 20.100 h  X,Y,Z TRAVEL 635,510,460 MM TABLE SIZE 790X560 MM CONTROL UNIT HEIDENHAIN TNC620 SPINDLE SPEED 8000 RPM SPINDLE TAPER SK40 NUMBER OF TOOLS IN MAGAZINE 20 POWER ON TIME 31.000 H SPINDLE RUNNING TIME 20.100 H
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), floorspace 0,8x0,5 m, total height 1,7 m, cyclone (1x), material stainless steel , diameter 500mm, cylindrical height 500mm, conical height 750mm, dished top , inlet dia. 50mm, air outlet dia. 50mm, solids outlet dia. 100mmcyclonesdust separators > cyclones what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), FLOORSPACE 0,8X0,5 M, TOTAL HEIGHT 1,7 M, CYCLONE (1X), MATERIAL STAINLESS STEEL , DIAMETER 500MM, CYLINDRICAL HEIGHT 500MM, CONICAL HEIGHT 750MM, DISHED TOP , INLET DIA. 50MM, AIR OUTLET DIA. 50MM, SOLIDS OUTLET DIA. 100MMCYCLONESDUST SEPARATORS > CYCLONES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-rundstapleraleger with folding unit
infeed width: 82 cm
serial no.: fh. hac0-00759 RUNDSTAPLERALEGER WITH FOLDING UNIT INFEED WIDTH: 82 CM SERIAL NO.: FH. HAC0-00759
Vendedor: Raoul Acakpo Oura
Año de construcción: usado
Ubicación: Land-x-travel: 860 mm<br/>y-travel: 640 mm<br/>z-travel: 680 mm<br/>control: heidenhain tnc 155 <br/>table-size: 1000 x 600 mm<br/>spindle turning speed range: 4000 u/min<br/>spindle: 22 kw<br/>extra information:<br/><br/>4th axis:<br/>- c axis<br/>- diameter in the divider: 35 mm<br/>- 4-axis digital path control<br/><br/>electronic handwheel:<br/>- hr 250<br/>------------------------------------------------------------<br/>the machine is in a well-maintained condition,<br/>works in switzerland and can<br/>be inspected at any time under power.<br/><br/><br/><br/><br/> X-TRAVEL: 860 MM
Y-TRAVEL: 640 MM
Z-TRAVEL: 680 MM
CONTROL: HEIDENHAIN TNC 155
TABLE-SIZE: 1000 X 600 MM
SPINDLE TURNING SPEED RANGE: 4000 U/MIN
SPINDLE: 22 KW
EXTRA INFORMATION:

4TH AXIS:
- C AXIS
- DIAMETER IN THE DIVIDER: 35 MM
- 4-AXIS DIGITAL PATH CONTROL

ELECTRONIC HANDWHEEL:
- HR 250
------------------------------------------------------------
THE MACHINE IS IN A WELL-MAINTAINED CONDITION,
WORKS IN SWITZERLAND AND CAN
BE INSPECTED AT ANY TIME UNDER POWER.




Vendedor: STEINHAND GmbH
Año de construcción: usado
Ubicación: Land-printery from one place in germany as package for sale:

manufacturer: heidelberger
model: quickmaster
2 colors.
automatic plate feeder, inserter.
year: 2008
well maintained.
 
manufacturer: heidelberger
model: tiegel
roll set (4pcs) new
year: approx. 1970

cutting machine
manufacturer: polar mohr
model: type e 92
incl. 5 knives
top condition, regular maintenance
year: 1995

folding machine
manufacturer: multipli
model: 35 by mb
year of construction approx. 2008
have new rollers in

fälzelgerät
matador
electrical

drilling machine
manufacturer: citoborma
model: 280 b
2 heads

stapling machine multinak s
2 stitching heads
 
platesetter
manufacturer: sack
for 50x70
with vanity unit and 10 drawers.

various cabinets

package price: on request PRINTERY FROM ONE PLACE IN GERMANY AS PACKAGE FOR SALE: MANUFACTURER: HEIDELBERGER MODEL: QUICKMASTER 2 COLORS. AUTOMATIC PLATE FEEDER, INSERTER. YEAR: 2008 WELL MAINTAINED. MANUFACTURER: HEIDELBERGER MODEL: TIEGEL ROLL SET (4PCS) NEW YEAR: APPROX. 1970 CUTTING MACHINE MANUFACTURER: POLAR MOHR MODEL: TYPE E 92 INCL. 5 KNIVES TOP CONDITION, REGULAR MAINTENANCE YEAR: 1995 FOLDING MACHINE MANUFACTURER: MULTIPLI MODEL: 35 BY MB YEAR OF CONSTRUCTION APPROX. 2008 HAVE NEW ROLLERS IN FäLZELGERäT MATADOR ELECTRICAL DRILLING MACHINE MANUFACTURER: CITOBORMA MODEL: 280 B 2 HEADS STAPLING MACHINE MULTINAK S 2 STITCHING HEADS PLATESETTER MANUFACTURER: SACK FOR 50X70 WITH VANITY UNIT AND 10 DRAWERS. VARIOUS CABINETS PACKAGE PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-x-travel: 1.400 mm<br/>y-travel: 600 mm<br/>z-travel: 600 mm<br/>control: itnc 530  heidenhain<br/>distance spindlenose and center of table: 125 - 725 mm<br/>main spindle::  <br/>max. rpm: 10.000 min/-1<br/>power capacity - main spindel: 22 / 35 kw<br/>tool taper: sk 40 <br/>work table::  <br/>table surface area: 1.500 x 650 mm<br/>max. table load: 1.400 kg<br/>tool magazin::  <br/>number of toolpositions: 40 pos.<br/>tool taper: sk 40 <br/>max. tool length: 250 mm<br/>max. tool diameter: 130 mm<br/>max. tool diameter: 200 mm<br/>max. tool weight: 15,0 kg<br/>feeds::  <br/>rapid traverse ( x / y / z ): 24 / 24 / 20 m/min<br/>feed speeds: 0,001 - 15.000 mm/min<br/>total power requirement: 50 kva<br/>weight of the machine ca.: 8,0 t<br/>dimensions of the machine ca.: 5,5 x 4,5 x 2,8 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>high pressure coolant: 20 bar <br/>through spindle coolant:  <br/>signal-light:  <br/>spindle oil cooler:  <br/>automatic tool changer:  <br/>test probe: m&h irp 25.50 <br/>elektr. hand wheel:  <br/>cnc-machiningcenter vertical<br/>awea - bm 1460<br/><br/>- without clamping-elements<br/><br/><br/><br/><br/> X-TRAVEL: 1.400 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 600 MM
CONTROL: ITNC 530 HEIDENHAIN
DISTANCE SPINDLENOSE AND CENTER OF TABLE: 125 - 725 MM
MAIN SPINDLE::
MAX. RPM: 10.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 22 / 35 KW
TOOL TAPER: SK 40
WORK TABLE::
TABLE SURFACE AREA: 1.500 X 650 MM
MAX. TABLE LOAD: 1.400 KG
TOOL MAGAZIN::
NUMBER OF TOOLPOSITIONS: 40 POS.
TOOL TAPER: SK 40
MAX. TOOL LENGTH: 250 MM
MAX. TOOL DIAMETER: 130 MM
MAX. TOOL DIAMETER: 200 MM
MAX. TOOL WEIGHT: 15,0 KG
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 24 / 24 / 20 M/MIN
FEED SPEEDS: 0,001 - 15.000 MM/MIN
TOTAL POWER REQUIREMENT: 50 KVA
WEIGHT OF THE MACHINE CA.: 8,0 T
DIMENSIONS OF THE MACHINE CA.: 5,5 X 4,5 X 2,8 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
HIGH PRESSURE COOLANT: 20 BAR
THROUGH SPINDLE COOLANT:
SIGNAL-LIGHT:
SPINDLE OIL COOLER:
AUTOMATIC TOOL CHANGER:
TEST PROBE: M&H IRP 25.50
ELEKTR. HAND WHEEL:
CNC-MACHININGCENTER VERTICAL
AWEA - BM 1460

- WITHOUT CLAMPING-ELEMENTS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HEID types: