70 ofertas

Año de construcción: usado
Precio: 3.600 €
Ubicación: Land-: 50 mm<br/>: 155 mm<br/>: 1,5 kw<br/>: 1.050 mm<br/>: 750 mm<br/>: 1.450 mm<br/>: 390 kg<br/>2 mech. driven rolls <br/>strong cast steel construction <br/>shafts made of special steel, hardened and ground <br/>top roll manual adjustable <br/>hardened universal rolls <br/>lateral rolls adjustable in 1 axis <br/>horizontal and vertical operation <br/>double foot pedal for for- and backward drive <br/>machine and equipment according to the ce regulations <br/>user manual in german and english <br/><br/>we have more than 210 references!<br/><br/>shaft diameter: 50 mm <br/>roll diameter: 155<br/>driven roll: 2 <br/>motor power: 1,5 kw <br/>speed: 4,5 m/min <br/>bending capacity (section / min. diameter):<br/>flat steel vertical position: 60x10 mm / 500 mm, 40x10 mm / 400 mm <br/>flat steel horizontal position: 100x15 mm / 450 mm, 60 x 10 mm / 350 mm<br/>square bar: 35x35 mm / 900 mm, 20x20 mm / 300 mm<br/>round bar: Ø 35 mm / 600 mm, Ø 30 mm / 400 mm<br/>tube: Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2",x2,9 mm / 1.000 mm, 1",x2,3 mm / 350 mm <br/>form tube vertical position: 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm <br/>form tube square: 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm  <br/>angle leg outside: 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm  <br/>angle leg inside: 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm<br/>length: 1.050 mm <br/>width: 750 mm <br/>heigth: 1.450 mm<br/>weight: 390 kg<br/><br/><br/><br/> : 50 MM
: 155 MM
: 1,5 KW
: 1.050 MM
: 750 MM
: 1.450 MM
: 390 KG
2 MECH. DRIVEN ROLLS 
STRONG CAST STEEL CONSTRUCTION 
SHAFTS MADE OF SPECIAL STEEL, HARDENED AND GROUND 
TOP ROLL MANUAL ADJUSTABLE 
HARDENED UNIVERSAL ROLLS 
LATERAL ROLLS ADJUSTABLE IN 1 AXIS 
HORIZONTAL AND VERTICAL OPERATION 
DOUBLE FOOT PEDAL FOR FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

WE HAVE MORE THAN 210 REFERENCES!

SHAFT DIAMETER: 50 MM
ROLL DIAMETER: 155
DRIVEN ROLL: 2
MOTOR POWER: 1,5 KW
SPEED: 4,5 M/MIN
BENDING CAPACITY (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 60X10 MM / 500 MM, 40X10 MM / 400 MM
FLAT STEEL HORIZONTAL POSITION: 100X15 MM / 450 MM, 60 X 10 MM / 350 MM
SQUARE BAR: 35X35 MM / 900 MM, 20X20 MM / 300 MM
ROUND BAR: Ø 35 MM / 600 MM, Ø 30 MM / 400 MM
TUBE: Ø 70X2 MM / 1.000 MM, Ø 30X2 MM / 500 MM, 2",X2,9 MM / 1.000 MM, 1",X2,3 MM / 350 MM
FORM TUBE VERTICAL POSITION: 70X30X2 MM / 1.200 MM, 50X40X3 MM / 1.200 MM
FORM TUBE SQUARE: 50X50X3 MM / 1.700 MM, 40X40X3 MM / 600 MM
ANGLE LEG OUTSIDE: 50X50X5 MM / 800 MM, 40X40X5 MM / 600 MM
ANGLE LEG INSIDE: 50X50X6 MM / 1.000 MM, 30X30X3 MM / 500 MM
LENGTH: 1.050 MM
WIDTH: 750 MM
HEIGTH: 1.450 MM
WEIGHT: 390 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-: 1.000 mm<br/>: 150 to<br/>: 4- v<br/>: 11 kw<br/>: 300 mm<br/>: 610 mm<br/>: 1.020 mm<br/>: 8 mm<br/>: 600 x 1.020 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.110 mm<br/>: 1.000 mm<br/>: 2.450 mm<br/>: 2.400 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.000 mm <br/>bending force: 150 to <br/>upper tool: cranked <br/>lower tool: 4-v <br/>motor power: 11 kw <br/>stroke: 300 mm <br/>distance ram-table: 610 mm <br/>distance between columns: 1.020 mm <br/>working speed: 5 mm/s <br/>rapid speed: down 9 mm/s up 10 mm/s <br/>bending capacity: 8 mm <br/>table: 600 x 1.020 mm <br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.110 mm <br/>width: 1.000 mm <br/>heigth: 2.450 mm<br/>weight: 2.400 kg<br/><br/><br/><br/> : 1.000 MM
: 150 TO
: 4- V
: 11 KW
: 300 MM
: 610 MM
: 1.020 MM
: 8 MM
: 600 X 1.020 MM
: 100 MM
: 190 MM
: 2.110 MM
: 1.000 MM
: 2.450 MM
: 2.400 KG
2 GUIDINGS 
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS 
UPPER AND LOWER PRESSBRAKE TOOL 
MANOMETER 
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED 
PISTON STOPS IN EVERY POSITION 
MANUEL AND 2 HAND WORKING 
TISCH HöHENVERSTELLBAR 
ACCORDING TO CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.000 MM
BENDING FORCE: 150 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 610 MM
DISTANCE BETWEEN COLUMNS: 1.020 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 8 MM
TABLE: 600 X 1.020 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.110 MM
WIDTH: 1.000 MM
HEIGTH: 2.450 MM
WEIGHT: 2.400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 33.700 €
Ubicación: Land-: 10 mm<br/>: 8 mm<br/>: 6 mm<br/>: 2.050 mm<br/>: 220 mm<br/>: 220 mm<br/>: 160 mm<br/>: 3.700 mm<br/>: 1.200 mm<br/>: 1.400 mm<br/>: 7,5 kw<br/>: 4.500 kg<br/>standard equipment<br/><br/>fully hydraulic drive of upper roll and lower roll<br/>hydraulic infeed of lower and side roll<br/>digital read-out of lower and side rolls position<br/>conical bending device<br/>hydraulic load relieving of upper roll<br/>hydraulic drop-end bearing  <br/>hardened rolls <br/>2 working speeds<br/>central lubrication system<br/>protection against overload<br/>moveable control pane <br/>user manual in german and english <br/>machine and equipment according to the ce regulations <br/><br/>optional equipment<br/><br/>ground and polished rolls<br/>infinitely adustable speed of rolls<br/>hydraulic/mechanic adjustable upper and lateral supports<br/>aut. material withdrawal<br/>changeable upper roll for especially narrow bending radii<br/><br/>important issues at conical bending: <br/><br/>the max. sheet metal thickness is equivalent to 50 % of nominal capacity <br/>the cone length can be max. 30 % ore must be more than 60 % of roll length <br/>hardened rolls are recommended<br/><br/>(sample photo)<br/><br/>bending capacity without pre-bending at 5x upper tool diam.: 10 mm<br/>bending capacity with pre-bending at 5x upper tool diam.: 8 mm<br/>bending capacity with pre-bending at 1,5x upper tool diam.: 6 mm<br/>bending length: 2.050 mm<br/>upper roll diameter: 220 mm <br/>lower roll diameter: 220 mm  <br/>side roll diameter: 160 mm<br/>working speed: 1,5-6 m/min<br/>length: 3.700 mm <br/>width: 1.200 mm <br/>heigth: 1.400 mm <br/>motor power: 7,5 kw<br/>weight: 4.500 kg<br/><br/><br/><br/> : 10 MM
: 8 MM
: 6 MM
: 2.050 MM
: 220 MM
: 220 MM
: 160 MM
: 3.700 MM
: 1.200 MM
: 1.400 MM
: 7,5 KW
: 4.500 KG
STANDARD EQUIPMENT

FULLY HYDRAULIC DRIVE OF UPPER ROLL AND LOWER ROLL
HYDRAULIC INFEED OF LOWER AND SIDE ROLL
DIGITAL READ-OUT OF LOWER AND SIDE ROLLS POSITION
CONICAL BENDING DEVICE
HYDRAULIC LOAD RELIEVING OF UPPER ROLL
HYDRAULIC DROP-END BEARING 
HARDENED ROLLS
2 WORKING SPEEDS
CENTRAL LUBRICATION SYSTEM
PROTECTION AGAINST OVERLOAD
MOVEABLE CONTROL PANE
USER MANUAL IN GERMAN AND ENGLISH 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

OPTIONAL EQUIPMENT

GROUND AND POLISHED ROLLS
INFINITELY ADUSTABLE SPEED OF ROLLS
HYDRAULIC/MECHANIC ADJUSTABLE UPPER AND LATERAL SUPPORTS
AUT. MATERIAL WITHDRAWAL
CHANGEABLE UPPER ROLL FOR ESPECIALLY NARROW BENDING RADII

IMPORTANT ISSUES AT CONICAL BENDING:

THE MAX. SHEET METAL THICKNESS IS EQUIVALENT TO 50 % OF NOMINAL CAPACITY 
THE CONE LENGTH CAN BE MAX. 30 % ORE MUST BE MORE THAN 60 % OF ROLL LENGTH 
HARDENED ROLLS ARE RECOMMENDED

(SAMPLE PHOTO)

BENDING CAPACITY WITHOUT PRE-BENDING AT 5X UPPER TOOL DIAM.: 10 MM
BENDING CAPACITY WITH PRE-BENDING AT 5X UPPER TOOL DIAM.: 8 MM
BENDING CAPACITY WITH PRE-BENDING AT 1,5X UPPER TOOL DIAM.: 6 MM
BENDING LENGTH: 2.050 MM
UPPER ROLL DIAMETER: 220 MM
LOWER ROLL DIAMETER: 220 MM
SIDE ROLL DIAMETER: 160 MM
WORKING SPEED: 1,5-6 M/MIN
LENGTH: 3.700 MM
WIDTH: 1.200 MM
HEIGTH: 1.400 MM
MOTOR POWER: 7,5 KW
WEIGHT: 4.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 3.980 €
Ubicación: Land-: 1,5 mm<br/>: 1.270 mm<br/>: 75 mm<br/>: 1,5 kw<br/>: 1.830 mm<br/>: 700 mm<br/>: 1.160 mm<br/>: 400 kg<br/>asymetric rolls <br/>2 rolls driven by brakemotor <br/>lateral roll adjustable by raster lever<br/>tiltable upper roll <br/>double foot pedal for forward and reverse revs <br/>longitudinal grooves in lower and lateral roll<br/>hardened rolls<br/>user manual in german<br/><br/>bending capacity: 1,5 mm  <br/>bending length: 1.270 mm <br/>roll diameter: 75 mm <br/>motor power: 1,5 kw <br/>length: 1.830 mm <br/>width: 700 mm <br/>heigth: 1.160 mm<br/>weight: 400 kg<br/><br/><br/><br/> : 1,5 MM
: 1.270 MM
: 75 MM
: 1,5 KW
: 1.830 MM
: 700 MM
: 1.160 MM
: 400 KG
ASYMETRIC ROLLS 
2 ROLLS DRIVEN BY BRAKEMOTOR 
LATERAL ROLL ADJUSTABLE BY RASTER LEVER
TILTABLE UPPER ROLL
DOUBLE FOOT PEDAL FOR FORWARD AND REVERSE REVS 
LONGITUDINAL GROOVES IN LOWER AND LATERAL ROLL
HARDENED ROLLS
USER MANUAL IN GERMAN

BENDING CAPACITY: 1,5 MM
BENDING LENGTH: 1.270 MM
ROLL DIAMETER: 75 MM
MOTOR POWER: 1,5 KW
LENGTH: 1.830 MM
WIDTH: 700 MM
HEIGTH: 1.160 MM
WEIGHT: 400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 10.700 €
Ubicación: Land-: 100 to<br/>: 5,5 kw<br/>: 300 mm<br/>: 1.570 mm<br/>: 220 x 160 mm<br/>: 2.560 mm<br/>: 1.000 mm<br/>: 2.480 mm<br/>: 1.755 kg<br/>horizontal movable cylinder by handwheel<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo shows mod. hdk 1570/150)<br/><br/>bending force: 100 to<br/>motor power: 5,5 kw<br/>stroke: 300 mm<br/>distance between columns:	1.570 mm<br/>piston Ø: 220 x 160 mm<br/>advance speed: 8 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.560 mm<br/>width: 1.000 mm<br/>heigth: 2.480 mm<br/>weight: 1.755 kg<br/><br/><br/><br/> : 100 TO
: 5,5 KW
: 300 MM
: 1.570 MM
: 220 X 160 MM
: 2.560 MM
: 1.000 MM
: 2.480 MM
: 1.755 KG
HORIZONTAL MOVABLE CYLINDER BY HANDWHEEL
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. HDK 1570/150)

BENDING FORCE: 100 TO
MOTOR POWER: 5,5 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.570 MM
PISTON Ø: 220 X 160 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.560 MM
WIDTH: 1.000 MM
HEIGTH: 2.480 MM
WEIGHT: 1.755 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-: 180 / 1.000 mm<br/>: 2 mm<br/>: 700 mm<br/>: 280 mm<br/>: 1,1 kw<br/>: 1.400 mm<br/>: 400 mm<br/>: 1.150 mm<br/>: 360 kg<br/>gearbox motor with brake <br/>footpedal <br/>central lubrication<br/><br/>min / max diameter: 180 / 1.000 mm<br/>maximum thickness: 2 mm<br/>gap: 700 mm<br/>motor: 1,1 kw<br/>speed:  7,5 m/min<br/>gap on blade side:  280 mm<br/>length: 1.400 mm<br/>width: 400 mm<br/>height: 1.150 mm<br/>weight: 360 kg<br/><br/><br/><br/> : 180 / 1.000 MM
: 2 MM
: 700 MM
: 280 MM
: 1,1 KW
: 1.400 MM
: 400 MM
: 1.150 MM
: 360 KG
GEARBOX MOTOR WITH BRAKE
FOOTPEDAL
CENTRAL LUBRICATION

MIN / MAX DIAMETER: 180 / 1.000 MM
MAXIMUM THICKNESS: 2 MM
GAP: 700 MM
MOTOR: 1,1 KW
SPEED: 7,5 M/MIN
GAP ON BLADE SIDE: 280 MM
LENGTH: 1.400 MM
WIDTH: 400 MM
HEIGHT: 1.150 MM
WEIGHT: 360 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-: 3 mm<br/>: 2 mm<br/>: 1.050 mm<br/>: 90 mm<br/>: 1,1 kw<br/>: 1.630 mm<br/>: 700 mm<br/>: 1.200 mm<br/>: 480 kg<br/>asymetric rolls <br/>2 rolls driven by brakemotor <br/>lateral roll adjustable by handwheel <br/>tiltable upper roll <br/>conical rolling device <br/>double foot pedal for forward and reverse revs <br/>longitudinal grooves in lower and lateral roll <br/>hardent rolls<br/>user manual in german<br/><br/>(sample photo)<br/><br/>bending capacity: 3 mm<br/>prebending: 2 mm<br/>bending length: 1.050 mm<br/>roll diameter: 90 mm<br/>motor power: 1,1 kw<br/>rolling speed: 6 m/min<br/>length: 1.630 mm<br/>width: 700 mm<br/>heigth: 1.200 mm<br/>weight: 480 kg<br/><br/><br/><br/> : 3 MM
: 2 MM
: 1.050 MM
: 90 MM
: 1,1 KW
: 1.630 MM
: 700 MM
: 1.200 MM
: 480 KG
ASYMETRIC ROLLS 
2 ROLLS DRIVEN BY BRAKEMOTOR 
LATERAL ROLL ADJUSTABLE BY HANDWHEEL 
TILTABLE UPPER ROLL 
CONICAL ROLLING DEVICE 
DOUBLE FOOT PEDAL FOR FORWARD AND REVERSE REVS 
LONGITUDINAL GROOVES IN LOWER AND LATERAL ROLL
HARDENT ROLLS
USER MANUAL IN GERMAN

(SAMPLE PHOTO)

BENDING CAPACITY: 3 MM
PREBENDING: 2 MM
BENDING LENGTH: 1.050 MM
ROLL DIAMETER: 90 MM
MOTOR POWER: 1,1 KW
ROLLING SPEED: 6 M/MIN
LENGTH: 1.630 MM
WIDTH: 700 MM
HEIGTH: 1.200 MM
WEIGHT: 480 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 39.900 €
Ubicación: Land-: 10 mm<br/>: 8 mm<br/>: 6 mm<br/>: 2.550 mm<br/>: 245 mm<br/>: 245 mm<br/>: 180 mm<br/>: 4.500 mm<br/>: 1.500 mm<br/>: 1.500 mm<br/>: 7,5 kw<br/>: 6.600 kg<br/>standard equipment<br/><br/>fully hydraulic drive of upper roll and lower roll<br/>hydraulic infeed of lower and side roll<br/>digital read-out of lower and side rolls position<br/>conical bending device<br/>hydraulic load relieving of upper roll<br/>hydraulic drop-end bearing  <br/>hardened rolls <br/>2 working speeds<br/>central lubrication system<br/>protection against overload<br/>moveable control pane <br/>user manual in german and english <br/>machine and equipment according to the ce regulations <br/><br/>optional equipment<br/><br/>ground and polished rolls<br/>infinitely adustable speed of rolls<br/>hydraulic/mechanic adjustable upper and lateral supports<br/>aut. material withdrawal<br/>changeable upper roll for especially narrow bending radii<br/><br/>important issues at conical bending: <br/><br/>the max. sheet metal thickness is equivalent to 50 % of nominal capacity <br/>the cone length can be max. 30 % ore must be more than 60 % of roll length <br/>hardened rolls are recommended<br/><br/>(sample photo)<br/><br/>bending capacity without pre-bending at 5x upper tool diam.: 10 mm<br/>bending capacity with pre-bending at 5x upper tool diam.: 8 mm<br/>bending capacity with pre-bending at 1,5x upper tool diam.: 6 mm<br/>bending length: 2.550 mm<br/>upper roll diameter: 245 mm <br/>lower roll diameter: 245 mm <br/>side roll diameter: 180 mm<br/>working speed: 1,5-6 m/min<br/>length: 4.500 mm <br/>width: 1.500 mm <br/>heigth: 1.500 mm <br/>motor power: 7,5 kw<br/>weight: 6.600 kg<br/><br/><br/><br/> : 10 MM
: 8 MM
: 6 MM
: 2.550 MM
: 245 MM
: 245 MM
: 180 MM
: 4.500 MM
: 1.500 MM
: 1.500 MM
: 7,5 KW
: 6.600 KG
STANDARD EQUIPMENT

FULLY HYDRAULIC DRIVE OF UPPER ROLL AND LOWER ROLL
HYDRAULIC INFEED OF LOWER AND SIDE ROLL
DIGITAL READ-OUT OF LOWER AND SIDE ROLLS POSITION
CONICAL BENDING DEVICE
HYDRAULIC LOAD RELIEVING OF UPPER ROLL
HYDRAULIC DROP-END BEARING 
HARDENED ROLLS
2 WORKING SPEEDS
CENTRAL LUBRICATION SYSTEM
PROTECTION AGAINST OVERLOAD
MOVEABLE CONTROL PANE
USER MANUAL IN GERMAN AND ENGLISH 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

OPTIONAL EQUIPMENT

GROUND AND POLISHED ROLLS
INFINITELY ADUSTABLE SPEED OF ROLLS
HYDRAULIC/MECHANIC ADJUSTABLE UPPER AND LATERAL SUPPORTS
AUT. MATERIAL WITHDRAWAL
CHANGEABLE UPPER ROLL FOR ESPECIALLY NARROW BENDING RADII

IMPORTANT ISSUES AT CONICAL BENDING:

THE MAX. SHEET METAL THICKNESS IS EQUIVALENT TO 50 % OF NOMINAL CAPACITY 
THE CONE LENGTH CAN BE MAX. 30 % ORE MUST BE MORE THAN 60 % OF ROLL LENGTH 
HARDENED ROLLS ARE RECOMMENDED

(SAMPLE PHOTO)

BENDING CAPACITY WITHOUT PRE-BENDING AT 5X UPPER TOOL DIAM.: 10 MM
BENDING CAPACITY WITH PRE-BENDING AT 5X UPPER TOOL DIAM.: 8 MM
BENDING CAPACITY WITH PRE-BENDING AT 1,5X UPPER TOOL DIAM.: 6 MM
BENDING LENGTH: 2.550 MM
UPPER ROLL DIAMETER: 245 MM
LOWER ROLL DIAMETER: 245 MM
SIDE ROLL DIAMETER: 180 MM
WORKING SPEED: 1,5-6 M/MIN
LENGTH: 4.500 MM
WIDTH: 1.500 MM
HEIGTH: 1.500 MM
MOTOR POWER: 7,5 KW
WEIGHT: 6.600 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 28.800 €
Ubicación: Land-: 60 to<br/>: 236 bar<br/>: 750 x 500 mm<br/>: 500 x 430 mm<br/>: 100 mm<br/>: 250 mm<br/>: 450 mm<br/>: 7,5 kw<br/>: 1.820 mm<br/>: 960 mm<br/>: 2.400 mm<br/>: 4.000 kg<br/>front light guard <br/>pressure adjustment<br/>2-hand operating<br/>t-slots in table and ram<br/>stroke adjustment<br/>2 ram round guidings<br/>according to ",ce", regulation<br/>(sample photo)<br/><br/>press force: 60 to<br/>hydraulic pressure: 236 bar<br/>table: 750 x 500 mm<br/>ram dimension: 500 x 430 mm<br/>hole in table: 100 mm<br/>stroke: 250 mm<br/>distance ram-table: 450 mm<br/>rapid speed: 26 mm/s<br/>working speed: 8,5 mm/s<br/>return speed: 47 mm/s<br/>motor: 7,5 kw<br/>length: 1.820 mm<br/>width: 960 mm<br/>heigth: 2.400 mm<br/>weight: 4.000 kg<br/><br/><br/><br/> : 60 TO
: 236 BAR
: 750 X 500 MM
: 500 X 430 MM
: 100 MM
: 250 MM
: 450 MM
: 7,5 KW
: 1.820 MM
: 960 MM
: 2.400 MM
: 4.000 KG
FRONT LIGHT GUARD
PRESSURE ADJUSTMENT
2-HAND OPERATING
T-SLOTS IN TABLE AND RAM
STROKE ADJUSTMENT
2 RAM ROUND GUIDINGS
ACCORDING TO ",CE", REGULATION
(SAMPLE PHOTO)

PRESS FORCE: 60 TO
HYDRAULIC PRESSURE: 236 BAR
TABLE: 750 X 500 MM
RAM DIMENSION: 500 X 430 MM
HOLE IN TABLE: 100 MM
STROKE: 250 MM
DISTANCE RAM-TABLE: 450 MM
RAPID SPEED: 26 MM/S
WORKING SPEED: 8,5 MM/S
RETURN SPEED: 47 MM/S
MOTOR: 7,5 KW
LENGTH: 1.820 MM
WIDTH: 960 MM
HEIGTH: 2.400 MM
WEIGHT: 4.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 48.100 €
Ubicación: Land-: 10 mm<br/>: 8 mm<br/>: 6 mm<br/>: 3.100 mm<br/>: 260 mm<br/>: 260 mm<br/>: 200 mm<br/>: 5.000 mm<br/>: 1.600 mm<br/>: 1.700 mm<br/>: 7,5 kw<br/>: 7.900 kg<br/>standard equipment<br/><br/>fully hydraulic drive of upper roll and lower roll<br/>hydraulic infeed of lower and side roll<br/>digital read-out of lower and side rolls position<br/>conical bending device<br/>hydraulic load relieving of upper roll<br/>hydraulic drop-end bearing  <br/>hardened rolls <br/>2 working speeds<br/>central lubrication system<br/>protection against overload<br/>moveable control pane <br/>user manual in german and english <br/>machine and equipment according to the ce regulations <br/><br/>optional equipment<br/><br/>ground and polished rolls<br/>infinitely adustable speed of rolls<br/>hydraulic/mechanic adjustable upper and lateral supports<br/>aut. material withdrawal<br/>changeable upper roll for especially narrow bending radii<br/><br/>important issues at conical bending: <br/><br/>the max. sheet metal thickness is equivalent to 50 % of nominal capacity <br/>the cone length can be max. 30 % ore must be more than 60 % of roll length <br/>hardened rolls are recommended<br/><br/>(sample photo)<br/><br/>bending capacity without pre-bending at 5x upper tool diam.: 10 mm<br/>bending capacity with pre-bending at 5x upper tool diam.: 8 mm<br/>bending capacity with pre-bending at 1,5x upper tool diam.: 6 mm<br/>bending length: 3.100 mm<br/>upper roll diameter: 260 mm <br/>lower roll diameter: 260 mm <br/>side roll diameter: 200 mm<br/>working speed: 1,5-6 m/min<br/>length: 5.000 mm <br/>width: 1.600 mm <br/>heigth: 1.700 mm <br/>motor power: 7,5 kw<br/>weight: 7.900 kg<br/><br/><br/><br/> : 10 MM
: 8 MM
: 6 MM
: 3.100 MM
: 260 MM
: 260 MM
: 200 MM
: 5.000 MM
: 1.600 MM
: 1.700 MM
: 7,5 KW
: 7.900 KG
STANDARD EQUIPMENT

FULLY HYDRAULIC DRIVE OF UPPER ROLL AND LOWER ROLL
HYDRAULIC INFEED OF LOWER AND SIDE ROLL
DIGITAL READ-OUT OF LOWER AND SIDE ROLLS POSITION
CONICAL BENDING DEVICE
HYDRAULIC LOAD RELIEVING OF UPPER ROLL
HYDRAULIC DROP-END BEARING 
HARDENED ROLLS
2 WORKING SPEEDS
CENTRAL LUBRICATION SYSTEM
PROTECTION AGAINST OVERLOAD
MOVEABLE CONTROL PANE
USER MANUAL IN GERMAN AND ENGLISH 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

OPTIONAL EQUIPMENT

GROUND AND POLISHED ROLLS
INFINITELY ADUSTABLE SPEED OF ROLLS
HYDRAULIC/MECHANIC ADJUSTABLE UPPER AND LATERAL SUPPORTS
AUT. MATERIAL WITHDRAWAL
CHANGEABLE UPPER ROLL FOR ESPECIALLY NARROW BENDING RADII

IMPORTANT ISSUES AT CONICAL BENDING:

THE MAX. SHEET METAL THICKNESS IS EQUIVALENT TO 50 % OF NOMINAL CAPACITY 
THE CONE LENGTH CAN BE MAX. 30 % ORE MUST BE MORE THAN 60 % OF ROLL LENGTH 
HARDENED ROLLS ARE RECOMMENDED

(SAMPLE PHOTO)

BENDING CAPACITY WITHOUT PRE-BENDING AT 5X UPPER TOOL DIAM.: 10 MM
BENDING CAPACITY WITH PRE-BENDING AT 5X UPPER TOOL DIAM.: 8 MM
BENDING CAPACITY WITH PRE-BENDING AT 1,5X UPPER TOOL DIAM.: 6 MM
BENDING LENGTH: 3.100 MM
UPPER ROLL DIAMETER: 260 MM
LOWER ROLL DIAMETER: 260 MM
SIDE ROLL DIAMETER: 200 MM
WORKING SPEED: 1,5-6 M/MIN
LENGTH: 5.000 MM
WIDTH: 1.600 MM
HEIGTH: 1.700 MM
MOTOR POWER: 7,5 KW
WEIGHT: 7.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-: 100 to<br/>: 5,5 kw<br/>: 300 mm<br/>: 1.070 mm<br/>: 220 x 160 mm<br/>: 2.110 mm<br/>: 1.000 mm<br/>: 2.430 mm<br/>: 1.500 kg<br/>horizontal adjustable cylinder with clamping lever<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 100 to<br/>motor power: 5,5 kw<br/>stroke: 300 mm<br/>distance between columns: 1.070 mm<br/>piston Ø: 220 x 160 mm<br/>advance speed: 8 mm/s<br/>working speed:	5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.110 mm<br/>width: 1.000 mm<br/>heigth: 2.430 mm<br/>weight: 1.500 kg<br/><br/><br/><br/> : 100 TO
: 5,5 KW
: 300 MM
: 1.070 MM
: 220 X 160 MM
: 2.110 MM
: 1.000 MM
: 2.430 MM
: 1.500 KG
HORIZONTAL ADJUSTABLE CYLINDER WITH CLAMPING LEVER
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 100 TO
MOTOR POWER: 5,5 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.070 MM
PISTON Ø: 220 X 160 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.110 MM
WIDTH: 1.000 MM
HEIGTH: 2.430 MM
WEIGHT: 1.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.300 €
Ubicación: Land-: 80 to<br/>: 5,5 kw<br/>: 250 mm<br/>: 1040 mm<br/>: 200 x 120 mm<br/>: 575 mm<br/>: 865 mm<br/>: 1.710 mm<br/>: 700 mm<br/>: 2.100 mm<br/>: 835 kg<br/>horizontal adjustable cylinder with clamping lever<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>bending force: 80 to<br/>motor power: 5,5 kw<br/>stroke: 250 mm<br/>distance between columns: 1.040 mm<br/>piston Ø: 200 x 120 mm<br/>advance speed: 8 mm/s<br/>working speed:	5 mm/s<br/>return speed: 10 mm/s<br/>lateral adjustment area of cylinder: 575 mm<br/>max. distance cylinder bottom edge - table: 865 mm<br/>length: 1.710 mm<br/>width: 700 mm<br/>heigth: 2.100 mm<br/>weight: 835 kg<br/><br/><br/><br/> : 80 TO
: 5,5 KW
: 250 MM
: 1040 MM
: 200 X 120 MM
: 575 MM
: 865 MM
: 1.710 MM
: 700 MM
: 2.100 MM
: 835 KG
HORIZONTAL ADJUSTABLE CYLINDER WITH CLAMPING LEVER
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

BENDING FORCE: 80 TO
MOTOR POWER: 5,5 KW
STROKE: 250 MM
DISTANCE BETWEEN COLUMNS: 1.040 MM
PISTON Ø: 200 X 120 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LATERAL ADJUSTMENT AREA OF CYLINDER: 575 MM
MAX. DISTANCE CYLINDER BOTTOM EDGE - TABLE: 865 MM
LENGTH: 1.710 MM
WIDTH: 700 MM
HEIGTH: 2.100 MM
WEIGHT: 835 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-: 1.500 mm<br/>: 100 to<br/>: 4- v<br/>: 7,5 kw<br/>: 300 mm<br/>: 680 mm<br/>: 1.520 mm<br/>: 6 mm<br/>: 500 x 1.520 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.275 mm<br/>: 2.500 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.500 mm<br/>bending force: 100 to<br/>upper tool: cranked<br/>lower tool: 4-v<br/>motor power: 7,5 kw<br/>stroke: 300 mm<br/>distance ram-table: 680 mm<br/>distance between columns: 1.520 mm<br/>working speed: 5 mm/s<br/>rapid speed: down 9 mm/s up 10 mm/s<br/>bending capacity: 6 mm<br/>table: 500 x 1.520 mm<br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.630 mm<br/>width: 1.000 mm<br/>heigth: 2.275 mm<br/>weight: 2.500 kg<br/><br/><br/><br/> : 1.500 MM
: 100 TO
: 4- V
: 7,5 KW
: 300 MM
: 680 MM
: 1.520 MM
: 6 MM
: 500 X 1.520 MM
: 100 MM
: 190 MM
: 2.630 MM
: 1.000 MM
: 2.275 MM
: 2.500 KG
2 GUIDINGS
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS
UPPER AND LOWER PRESSBRAKE TOOL
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION
MANUEL AND 2 HAND WORKING
TISCH HöHENVERSTELLBAR
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.500 MM
BENDING FORCE: 100 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 7,5 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 680 MM
DISTANCE BETWEEN COLUMNS: 1.520 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 6 MM
TABLE: 500 X 1.520 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.275 MM
WEIGHT: 2.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-: 35 mm<br/>: 137 mm<br/>: 137 mm<br/>: 1,1 kw<br/>: 1.050 mm<br/>: 500 mm<br/>: 1.250 mm<br/>: 350 kg<br/>3 mech. driven rolls (brake motor)<br/>hardened and ground shafts<br/>lower rolls hydraulic adjustable <br/>horizontal and vertical operation<br/>standard set of rolls <br/>foot pedal for for- and backward drive<br/>2 digital readouts<br/>control panel<br/>machine and equipment according to the ce regulations <br/>user manual in german and english<br/><br/>we have more than 210 references!<br/><br/>shaft diameter: 35 mm<br/>roll diameter: 137 mm<br/>driven roll: 3<br/>motor power: 1,1 kw<br/>speed: 7 m/min<br/>bending capacity (section / min. diameter):	<br/>flat steel vertical position: 35x8 mm / 300 mm<br/>flat steel horizontal position: 50x12 mm / 400 mm<br/>square bar: 18x18 mm / 250 mm<br/>round bar: dm. 22 mm / 200 mm<br/>tube: dm. 40x1,5 mm / 500 mm<br/>form tube vertical position:	30x15x2,5 mm / 500 mm<br/>form tube square: 25x25x2 mm / 450 mm<br/>angle leg outside: 30x15x2,5 mm / 500 mm<br/>angle leg inside:	530x30x4 mm / 550 mm<br/>length: 1.050 mm<br/>width: 500 mm<br/>heigth: 1.250 mm<br/>weight: 350 kg<br/><br/><br/><br/> : 35 MM
: 137 MM
: 137 MM
: 1,1 KW
: 1.050 MM
: 500 MM
: 1.250 MM
: 350 KG
3 MECH. DRIVEN ROLLS (BRAKE MOTOR)
HARDENED AND GROUND SHAFTS
LOWER ROLLS HYDRAULIC ADJUSTABLE
HORIZONTAL AND VERTICAL OPERATION
STANDARD SET OF ROLLS
FOOT PEDAL FOR FOR- AND BACKWARD DRIVE
2 DIGITAL READOUTS
CONTROL PANEL
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

WE HAVE MORE THAN 210 REFERENCES!

SHAFT DIAMETER: 35 MM
ROLL DIAMETER: 137 MM
DRIVEN ROLL: 3
MOTOR POWER: 1,1 KW
SPEED: 7 M/MIN
BENDING CAPACITY (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 35X8 MM / 300 MM
FLAT STEEL HORIZONTAL POSITION: 50X12 MM / 400 MM
SQUARE BAR: 18X18 MM / 250 MM
ROUND BAR: DM. 22 MM / 200 MM
TUBE: DM. 40X1,5 MM / 500 MM
FORM TUBE VERTICAL POSITION: 30X15X2,5 MM / 500 MM
FORM TUBE SQUARE: 25X25X2 MM / 450 MM
ANGLE LEG OUTSIDE: 30X15X2,5 MM / 500 MM
ANGLE LEG INSIDE: 530X30X4 MM / 550 MM
LENGTH: 1.050 MM
WIDTH: 500 MM
HEIGTH: 1.250 MM
WEIGHT: 350 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-: 1.500 mm<br/>: 150 to<br/>: 4- v<br/>: 11 kw<br/>: 300 mm<br/>: 610 mm<br/>: 1.520 mm<br/>: 8 mm<br/>: 600 x 1.520 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.450 mm<br/>: 3.100 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.500 mm<br/>bending force: 150 to<br/>upper tool: cranked<br/>lower tool: 4-v<br/>motor power: 11 kw<br/>stroke: 300 mm<br/>distance ram-table: 610 mm<br/>distance between columns: 1.520 mm<br/>working speed: 5 mm/s<br/>rapid speed: down 9 mm/s up 10 mm/s<br/>bending capacity: 8 mm<br/>table: 600 x 1.520 mm<br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.630 mm<br/>width: 1.000 mm<br/>heigth: 2.450 mm<br/>weight: 3.100 kg<br/><br/><br/><br/> : 1.500 MM
: 150 TO
: 4- V
: 11 KW
: 300 MM
: 610 MM
: 1.520 MM
: 8 MM
: 600 X 1.520 MM
: 100 MM
: 190 MM
: 2.630 MM
: 1.000 MM
: 2.450 MM
: 3.100 KG
2 GUIDINGS
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS
UPPER AND LOWER PRESSBRAKE TOOL
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION
MANUEL AND 2 HAND WORKING
TISCH HöHENVERSTELLBAR
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.500 MM
BENDING FORCE: 150 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 610 MM
DISTANCE BETWEEN COLUMNS: 1.520 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 8 MM
TABLE: 600 X 1.520 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.450 MM
WEIGHT: 3.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 24.700 €
Ubicación: Land-: 100 mm<br/>: 315 mm<br/>: 7,5 kw<br/>: 1.465 mm<br/>: 2.000 mm<br/>: 1.700 mm<br/>: 4.000 ~  kg<br/>3 hydr. driven rolls <br/>strong welded steel construction <br/>lower rolls hydr. adjustable <br/>digital read-out for lower rolls positions on seperate control panel <br/>lateral rolls adjustable in 3 axes <br/>horizontal and vertical operation <br/>for- and backward drive <br/>machine and equipment according to the ce regulations <br/><br/>we have more than 210 references!<br/><br/>shaft diameter: 100 mm <br/>roll diameter: 315 mm <br/>driven roll: 3 <br/>motor power: 7,5 kw <br/>speed: 7 m/min. <br/>bending capacities (section / min. diameter): <br/>flat steel vertical position: 100x20 mm / 800 mm, 30x10 mm / 400 mm<br/>flat steel horizontal position: 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm<br/>square bar: 60x60 mm / 750 mm, 15x15 mm / 400 mm<br/>round bar:	Ø 75 mm / 800 mm, Ø 15 mm / 450 mm<br/>tube:	Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4",x6,02 / 1.000 mm, Ø 1/2",x2,77 / 450 mm<br/>form tube vertical position:	100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm<br/>form tube horizontal position: 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm<br/>angle leg outside: 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm<br/>angle leg inside:	100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm<br/>upn leg outside:	upn 180 / 900 mm, upn 30 / 400 mm<br/>upn leg inside: upn 180 / 1.000 mm, upn 30 / 400 mm<br/>ipn horizontal position: ipn 180 / 1.000 mm, ipn 80 / 400 mm<br/>length: 1.465 mm <br/>width: 2.000 mm <br/>heigth: 1.700 mm <br/>weight: ~ 4.000 kg<br/><br/><br/><br/> : 100 MM
: 315 MM
: 7,5 KW
: 1.465 MM
: 2.000 MM
: 1.700 MM
: 4.000 ~ KG
3 HYDR. DRIVEN ROLLS 
STRONG WELDED STEEL CONSTRUCTION 
LOWER ROLLS HYDR. ADJUSTABLE 
DIGITAL READ-OUT FOR LOWER ROLLS POSITIONS ON SEPERATE CONTROL PANEL 
LATERAL ROLLS ADJUSTABLE IN 3 AXES 
HORIZONTAL AND VERTICAL OPERATION 
FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

WE HAVE MORE THAN 210 REFERENCES!

SHAFT DIAMETER: 100 MM
ROLL DIAMETER: 315 MM
DRIVEN ROLL: 3
MOTOR POWER: 7,5 KW
SPEED: 7 M/MIN.
BENDING CAPACITIES (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 100X20 MM / 800 MM, 30X10 MM / 400 MM
FLAT STEEL HORIZONTAL POSITION: 200X30 MM / 1.200 MM, 160X35 MM / 800 MM, 80X5 MM / 400 MM
SQUARE BAR: 60X60 MM / 750 MM, 15X15 MM / 400 MM
ROUND BAR: Ø 75 MM / 800 MM, Ø 15 MM / 450 MM
TUBE: Ø 125X2,5 MM / 1.400 MM, Ø 15X1 MM / 450 MM, Ø 4",X6,02 / 1.000 MM, Ø 1/2",X2,77 / 450 MM
FORM TUBE VERTICAL POSITION: 100X40X4 MM / 1.300 MM, 25X15X2 MM / 450 MM
FORM TUBE HORIZONTAL POSITION: 80X80X5 MM / 1.500 MM, 25X25X2 MM / 450 MM
ANGLE LEG OUTSIDE: 100X100X12 MM / 1.000 MM, 40X40X4 MM / 700 MM
ANGLE LEG INSIDE: 100X100X10 MM / 1.000 MM, 40X40X4 MM / 550 MM
UPN LEG OUTSIDE: UPN 180 / 900 MM, UPN 30 / 400 MM
UPN LEG INSIDE: UPN 180 / 1.000 MM, UPN 30 / 400 MM
IPN HORIZONTAL POSITION: IPN 180 / 1.000 MM, IPN 80 / 400 MM
LENGTH: 1.465 MM
WIDTH: 2.000 MM
HEIGTH: 1.700 MM
WEIGHT: ~ 4.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-: 3 mm<br/>: 2 mm<br/>: 1.050 mm<br/>: 90 mm<br/>: 1,1 kw<br/>: 1.630 mm<br/>: 700 mm<br/>: 1.200 mm<br/>: 480 kg<br/>asymetric rolls <br/>2 rolls driven by brakemotor <br/>lateral roll adjustable by handwheel <br/>tiltable upper roll <br/>conical rolling device <br/>double foot pedal for forward and reverse revs <br/>longitudinal grooves in lower and lateral roll <br/>user manual in german<br/><br/>extra: hardent rolls euro 600,--<br/><br/>bending capacity: 3 mm <br/>prebending: 2 mm <br/>bending length: 1.050 mm <br/>roll diameter: 90 mm <br/>motor power: 1,1 kw <br/>rolling speed: 6 m/min <br/>length: 1.630 mm <br/>width: 700 mm <br/>heigth: 1.200 mm<br/>weight: 480 kg<br/><br/><br/><br/> : 3 MM
: 2 MM
: 1.050 MM
: 90 MM
: 1,1 KW
: 1.630 MM
: 700 MM
: 1.200 MM
: 480 KG
ASYMETRIC ROLLS 
2 ROLLS DRIVEN BY BRAKEMOTOR 
LATERAL ROLL ADJUSTABLE BY HANDWHEEL 
TILTABLE UPPER ROLL 
CONICAL ROLLING DEVICE 
DOUBLE FOOT PEDAL FOR FORWARD AND REVERSE REVS 
LONGITUDINAL GROOVES IN LOWER AND LATERAL ROLL 
USER MANUAL IN GERMAN

EXTRA: HARDENT ROLLS EURO 600,--

BENDING CAPACITY: 3 MM
PREBENDING: 2 MM
BENDING LENGTH: 1.050 MM
ROLL DIAMETER: 90 MM
MOTOR POWER: 1,1 KW
ROLLING SPEED: 6 M/MIN
LENGTH: 1.630 MM
WIDTH: 700 MM
HEIGTH: 1.200 MM
WEIGHT: 480 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-: 1.500 mm<br/>: 150 to<br/>: 4- v<br/>: 11 kw<br/>: 300 mm<br/>: 610 mm<br/>: 1.520 mm<br/>: 8 mm<br/>: 600 x 1.520 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.450 mm<br/>: 3.100 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.500 mm<br/>bending force: 150 to<br/>upper tool: cranked<br/>lower tool: 4-v<br/>motor power: 11 kw<br/>stroke: 300 mm<br/>distance ram-table: 610 mm<br/>distance between columns: 1.520 mm<br/>working speed: 5 mm/s<br/>rapid speed: down 9 mm/s up 10 mm/s<br/>bending capacity: 8 mm<br/>table: 600 x 1.520 mm<br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.630 mm<br/>width: 1.000 mm<br/>heigth: 2.450 mm<br/>weight: 3.100 kg<br/><br/><br/><br/> : 1.500 MM
: 150 TO
: 4- V
: 11 KW
: 300 MM
: 610 MM
: 1.520 MM
: 8 MM
: 600 X 1.520 MM
: 100 MM
: 190 MM
: 2.630 MM
: 1.000 MM
: 2.450 MM
: 3.100 KG
2 GUIDINGS
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS
UPPER AND LOWER PRESSBRAKE TOOL
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION
MANUEL AND 2 HAND WORKING
TISCH HöHENVERSTELLBAR
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.500 MM
BENDING FORCE: 150 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 610 MM
DISTANCE BETWEEN COLUMNS: 1.520 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 8 MM
TABLE: 600 X 1.520 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.450 MM
WEIGHT: 3.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-: 80 mm<br/>: 245 mm<br/>: 4 kw<br/>: 1.450 mm<br/>: 1.000 mm<br/>: 1.400 mm<br/>: 1.700 ~  kg<br/>3 motor driven rolls <br/>strong welded steel construction <br/>lower rolls hydr. adjustable <br/>digital read-out for lower rolls positions on seperate control panel <br/>lateral rolls adjustable in 3 axes <br/>horizontal and vertical operation <br/>for- and backward drive <br/>machine and equipment according to the ce regulations <br/> <br/>we have more than 210 references!<br/><br/>shaft diameter: 80 mm <br/>roll diameter: 245 mm <br/>driven roll: 3 <br/>motor power: 5 kw <br/>speed: 6 m/min. <br/>bending capacities (section / min. diameter): <br/>flat steel vertical position: 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300<br/>flat steel horizontal position: 125x25 mm / 600 mm, 60x5 mm / 300 mm<br/>square bar: 45x45 mm / 500 mm, 15x15 mm / 380 mm<br/>round bar:	Ø 50 mm / 500 mm, Ø 15 mm / 380 mm<br/>tube:	Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3",x5,48 / 800 mm, Ø 1/2",x2,77 / 380 mm<br/>form tube vertical position:	80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm<br/>form tube horizontal position: 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm<br/>angle leg outside: 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm<br/>angle leg inside:	70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm<br/>upn leg outside: upn 140 / 1600 mm, upn 120 / 900 mm, upn 100 / 800 mm<br/>upn leg inside: upn 140 / 1.600 mm, upn 120 / 1000 mm, upn 100 / 800 mm<br/>ipn horizontal position: ipn 120 / 600 mm, ipn 80 / 400 mm<br/>length: 1.450 mm<br/>width: 1.000 mm<br/>heigth: 1.400 mm<br/>weight: ~ 1.700 kg<br/><br/><br/><br/> : 80 MM
: 245 MM
: 4 KW
: 1.450 MM
: 1.000 MM
: 1.400 MM
: 1.700 ~ KG
3 MOTOR DRIVEN ROLLS
STRONG WELDED STEEL CONSTRUCTION
LOWER ROLLS HYDR. ADJUSTABLE
DIGITAL READ-OUT FOR LOWER ROLLS POSITIONS ON SEPERATE CONTROL PANEL
LATERAL ROLLS ADJUSTABLE IN 3 AXES
HORIZONTAL AND VERTICAL OPERATION
FOR- AND BACKWARD DRIVE
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

WE HAVE MORE THAN 210 REFERENCES!

SHAFT DIAMETER: 80 MM
ROLL DIAMETER: 245 MM
DRIVEN ROLL: 3
MOTOR POWER: 5 KW
SPEED: 6 M/MIN.
BENDING CAPACITIES (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 100X20 MM / 2000 MM, 80X20 MM / 800 MM, 30X10 / 300
FLAT STEEL HORIZONTAL POSITION: 125X25 MM / 600 MM, 60X5 MM / 300 MM
SQUARE BAR: 45X45 MM / 500 MM, 15X15 MM / 380 MM
ROUND BAR: Ø 50 MM / 500 MM, Ø 15 MM / 380 MM
TUBE: Ø 100X2,5 MM / 1.200 MM, Ø 15X1 MM / 380 MM, Ø 3",X5,48 / 800 MM, Ø 1/2",X2,77 / 380 MM
FORM TUBE VERTICAL POSITION: 80X25X3 MM / 800 MM, 25X15X2 MM / 350 MM
FORM TUBE HORIZONTAL POSITION: 70X70X3 MM / 1.300 MM, 25X25X2 MM / 350 MM
ANGLE LEG OUTSIDE: 80X80X8 MM / 800 MM, 30X30X3 MM / 400 MM
ANGLE LEG INSIDE: 70X70X7 MM / 700 MM, 30X30X3 MM / 450 MM
UPN LEG OUTSIDE: UPN 140 / 1600 MM, UPN 120 / 900 MM, UPN 100 / 800 MM
UPN LEG INSIDE: UPN 140 / 1.600 MM, UPN 120 / 1000 MM, UPN 100 / 800 MM
IPN HORIZONTAL POSITION: IPN 120 / 600 MM, IPN 80 / 400 MM
LENGTH: 1.450 MM
WIDTH: 1.000 MM
HEIGTH: 1.400 MM
WEIGHT: ~ 1.700 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 9.000 €
Ubicación: Land-: 150 to<br/>: 11 kw<br/>: 300 mm<br/>: 1.070 mm<br/>: 280 x 200 mm<br/>: 2.110 mm<br/>: 1.000 mm<br/>: 2.480 mm<br/>: 1.870 kg<br/>horizontal adjustable cylinder with clamping lever<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 150 to<br/>motor power: 11 kw<br/>stroke: 300 mm<br/>distance between columns: 1.070 mm<br/>piston Ø: 280 x 200 mm<br/>advance speed: 9 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.110 mm<br/>width: 1.000 mm<br/>heigth: 2.480 mm<br/>weight: 1.870 kg<br/><br/><br/><br/> : 150 TO
: 11 KW
: 300 MM
: 1.070 MM
: 280 X 200 MM
: 2.110 MM
: 1.000 MM
: 2.480 MM
: 1.870 KG
HORIZONTAL ADJUSTABLE CYLINDER WITH CLAMPING LEVER
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 150 TO
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.070 MM
PISTON Ø: 280 X 200 MM
ADVANCE SPEED: 9 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.110 MM
WIDTH: 1.000 MM
HEIGTH: 2.480 MM
WEIGHT: 1.870 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 15.400 €
Ubicación: Land-: 150 to<br/>: 11 kw<br/>: 300 mm<br/>: 610 mm<br/>: 1.520 mm<br/>: 600 x 1.520 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.470 mm<br/>: 3.200 kg<br/>2 guidings <br/>upper plate with t-slots<br/>table plate with t-slots<br/>manometer<br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>table height adjustable<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 150 to <br/>motor power: 11 kw <br/>stroke: 300 mm <br/>distance ram-table: 610 mm <br/>distance between columns: 1.520 mm <br/>working speed: 5 mm/s <br/>rapid speed: down 9 mm/s up 10 mm/s <br/>table: 600 x 1.520 mm <br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.630 mm <br/>width: 1.000 mm <br/>heigth: 2.470 mm<br/>weight: 3.200 kg<br/><br/><br/><br/> : 150 TO
: 11 KW
: 300 MM
: 610 MM
: 1.520 MM
: 600 X 1.520 MM
: 100 MM
: 190 MM
: 2.630 MM
: 1.000 MM
: 2.470 MM
: 3.200 KG
2 GUIDINGS 
UPPER PLATE WITH T-SLOTS
TABLE PLATE WITH T-SLOTS
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION 
MANUEL AND 2 HAND WORKING
TABLE HEIGHT ADJUSTABLE
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 150 TO
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 610 MM
DISTANCE BETWEEN COLUMNS: 1.520 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
TABLE: 600 X 1.520 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.470 MM
WEIGHT: 3.200 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 10.400 €
Ubicación: Land-: 150 to<br/>: 11 kw<br/>: 300 mm<br/>: 1.570 mm<br/>: 280 x 200 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.480 mm<br/>: 2.100 kg<br/>horizontal adjustable cylinder with clamping lever<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 150 to<br/>motor power: 11 kw<br/>stroke: 300 mm<br/>distance between columns: 1.570 mm<br/>piston Ø: 280 x 200 mm<br/>advance speed: 9 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.630 mm<br/>width: 1.000 mm<br/>heigth: 2.480 mm<br/>weight: 2.100 kg<br/><br/><br/><br/> : 150 TO
: 11 KW
: 300 MM
: 1.570 MM
: 280 X 200 MM
: 2.630 MM
: 1.000 MM
: 2.480 MM
: 2.100 KG
HORIZONTAL ADJUSTABLE CYLINDER WITH CLAMPING LEVER
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 150 TO
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.570 MM
PISTON Ø: 280 X 200 MM
ADVANCE SPEED: 9 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.480 MM
WEIGHT: 2.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 8.600 €
Ubicación: Land-: 150 to<br/>: 11 kw<br/>: 300 mm<br/>: 1.070 mm<br/>: 280 x 200 mm<br/>: 2.050 mm<br/>: 1.000 mm<br/>: 2.270 mm<br/>: 1.870 kg<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo shows mod. hdk 1070/100)<br/><br/>bending force: 150 to<br/>motor power: 11 kw<br/>stroke: 300 mm<br/>distance between columns:	1.070 mm<br/>piston Ø: 280 x 200 mm<br/>advance speed:	9 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.050 mm<br/>width: 1.000 mm<br/>heigth: 2.270 mm<br/>weight: 1.870 kg<br/><br/><br/><br/> : 150 TO
: 11 KW
: 300 MM
: 1.070 MM
: 280 X 200 MM
: 2.050 MM
: 1.000 MM
: 2.270 MM
: 1.870 KG
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. HDK 1070/100)

BENDING FORCE: 150 TO
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.070 MM
PISTON Ø: 280 X 200 MM
ADVANCE SPEED: 9 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.050 MM
WIDTH: 1.000 MM
HEIGTH: 2.270 MM
WEIGHT: 1.870 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 8.400 €
Ubicación: Land-: 100 to<br/>: 11 kw<br/>: 300 mm<br/>: 1.570 mm<br/>: 220 x 160 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.430 mm<br/>: 1.600 kg<br/>horizontal adjustable cylinder with clamping lever<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 100 to<br/>motor power: 11 kw<br/>stroke: 300 mm<br/>distance between columns: 1.570 mm<br/>piston Ø: 220 x 160 mm<br/>advance speed: 8 mm/s<br/>working speed:	5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.630 mm<br/>width: 1.000 mm<br/>heigth: 2.430 mm<br/>weight: 1.600 kg<br/><br/><br/><br/> : 100 TO
: 11 KW
: 300 MM
: 1.570 MM
: 220 X 160 MM
: 2.630 MM
: 1.000 MM
: 2.430 MM
: 1.600 KG
HORIZONTAL ADJUSTABLE CYLINDER WITH CLAMPING LEVER
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 100 TO
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.570 MM
PISTON Ø: 220 X 160 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.430 MM
WEIGHT: 1.600 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 7.600 €
Ubicación: Land-: 100 to<br/>: 5,5 kw<br/>: 300 mm<br/>: 1.570 mm<br/>: 220 x 160 mm<br/>: 2.500 mm<br/>: 1.000 mm<br/>: 2.200 mm<br/>: 1.600 kg<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo shows mod. hdk 1070/100)<br/><br/>bending force: 100 to<br/>motor power: 5,5 kw<br/>stroke: 300 mm<br/>distance between columns: 1.570 mm<br/>piston Ø: 220 x 160 mm<br/>advance speed: 8 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.500 mm<br/>width: 1.000 mm<br/>heigth: 2.200 mm<br/>weight: 1.600 kg<br/><br/><br/><br/> : 100 TO
: 5,5 KW
: 300 MM
: 1.570 MM
: 220 X 160 MM
: 2.500 MM
: 1.000 MM
: 2.200 MM
: 1.600 KG
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. HDK 1070/100)

BENDING FORCE: 100 TO
MOTOR POWER: 5,5 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.570 MM
PISTON Ø: 220 X 160 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.500 MM
WIDTH: 1.000 MM
HEIGTH: 2.200 MM
WEIGHT: 1.600 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 5.400 €
Ubicación: Land-: 4,0 mm<br/>: 200 mm<br/>: 2,2 kw<br/>: 126 mm<br/>: 1.700 mm<br/>: 570 mm<br/>: 1.200 mm<br/>: 500 kg<br/>adjustable idle roll <br/>steel shafts with bronze bushings <br/>reduction motor with brake system <br/>movement of rolls with foot pedal <br/>complete with stand <br/>4 set of standard rolls <br/>built according to ec safety directives <br/>user manual in german and english<br/><br/>sheet thickness:	4,0 mm<br/>gap: 200 mm<br/>motor: 2,2 kw<br/>number of tools:	 4<br/>rolls diameter: 126 mm<br/>revs:	 16 r.p.m.<br/>length: 1.700 mm<br/>width: 570 mm<br/>height: 1.200 mm<br/>weight: 500 kg<br/><br/><br/><br/> : 4,0 MM
: 200 MM
: 2,2 KW
: 126 MM
: 1.700 MM
: 570 MM
: 1.200 MM
: 500 KG
ADJUSTABLE IDLE ROLL
STEEL SHAFTS WITH BRONZE BUSHINGS
REDUCTION MOTOR WITH BRAKE SYSTEM
MOVEMENT OF ROLLS WITH FOOT PEDAL
COMPLETE WITH STAND
4 SET OF STANDARD ROLLS
BUILT ACCORDING TO EC SAFETY DIRECTIVES
USER MANUAL IN GERMAN AND ENGLISH

SHEET THICKNESS: 4,0 MM
GAP: 200 MM
MOTOR: 2,2 KW
NUMBER OF TOOLS: 4
ROLLS DIAMETER: 126 MM
REVS: 16 R.P.M.
LENGTH: 1.700 MM
WIDTH: 570 MM
HEIGHT: 1.200 MM
WEIGHT: 500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 38.500 €
Ubicación: Land-: 150 to<br/>: 244 bar<br/>: 1100 x 700 mm<br/>: 750 x 500 mm<br/>: 120 mm<br/>: 300 mm<br/>: 500 mm<br/>: 7,5 kw<br/>: 2.300 mm<br/>: 1.400 mm<br/>: 2.750 mm<br/>: 7.700 kg<br/>front light guard <br/>pressure adjustment<br/>2-hand operating<br/>t-slots in table and ram<br/>stroke adjustment<br/>2 ram round guidings<br/>according to ",ce", regulation<br/>(sample photo)<br/> <br/><br/>press force: 150 to<br/>hydraulic pressure: 244 bar<br/>table: 1100 x 700 mm<br/>ram dimension: 750 x 500 mm<br/>hole in table: 120 mm<br/>stroke: 300 mm<br/>distance ram-table: 500 mm<br/>rapid speed: 10 mm/s<br/>working speed: 3,5 mm/s<br/>return speed: 22 mm/s<br/>motor: 7,5 kw<br/>length: 2.300 mm<br/>width: 1.400 mm<br/>heigth: 2.750 mm<br/>weight: 7.700 kg<br/><br/><br/><br/> : 150 TO
: 244 BAR
: 1100 X 700 MM
: 750 X 500 MM
: 120 MM
: 300 MM
: 500 MM
: 7,5 KW
: 2.300 MM
: 1.400 MM
: 2.750 MM
: 7.700 KG
FRONT LIGHT GUARD
PRESSURE ADJUSTMENT
2-HAND OPERATING
T-SLOTS IN TABLE AND RAM
STROKE ADJUSTMENT
2 RAM ROUND GUIDINGS
ACCORDING TO ",CE", REGULATION
(SAMPLE PHOTO)
 

PRESS FORCE: 150 TO
HYDRAULIC PRESSURE: 244 BAR
TABLE: 1100 X 700 MM
RAM DIMENSION: 750 X 500 MM
HOLE IN TABLE: 120 MM
STROKE: 300 MM
DISTANCE RAM-TABLE: 500 MM
RAPID SPEED: 10 MM/S
WORKING SPEED: 3,5 MM/S
RETURN SPEED: 22 MM/S
MOTOR: 7,5 KW
LENGTH: 2.300 MM
WIDTH: 1.400 MM
HEIGTH: 2.750 MM
WEIGHT: 7.700 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 12.100 €
Ubicación: Land-: 1.000 mm<br/>: 100 to<br/>: 4- v<br/>: 7,5 kw<br/>: 300 mm<br/>: 680 mm<br/>: 1.020 mm<br/>: 6 mm<br/>: 500 x 1.020 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.110 mm<br/>: 1.000 mm<br/>: 2.275 mm<br/>: 1.900 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.000 mm<br/>bending force: 100 to<br/>upper tool: cranked<br/>lower tool: 4-v<br/>motor power: 7,5 kw<br/>stroke: 300 mm<br/>distance ram-table: 680 mm<br/>distance between columns: 	1.020 mm<br/>working speed: 5 mm/s<br/>rapid speed: down 9 mm/s up 10 mm/s<br/>bending capacity: 6 mm<br/>table: 500 x 1.020 mm<br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.110 mm<br/>width: 1.000 mm<br/>heigth: 2.275 mm<br/>weight: 1.900 kg<br/><br/><br/><br/> : 1.000 MM
: 100 TO
: 4- V
: 7,5 KW
: 300 MM
: 680 MM
: 1.020 MM
: 6 MM
: 500 X 1.020 MM
: 100 MM
: 190 MM
: 2.110 MM
: 1.000 MM
: 2.275 MM
: 1.900 KG
2 GUIDINGS
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS
UPPER AND LOWER PRESSBRAKE TOOL
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION
MANUEL AND 2 HAND WORKING
TISCH HöHENVERSTELLBAR
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.000 MM
BENDING FORCE: 100 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 7,5 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 680 MM
DISTANCE BETWEEN COLUMNS: 1.020 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 6 MM
TABLE: 500 X 1.020 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.110 MM
WIDTH: 1.000 MM
HEIGTH: 2.275 MM
WEIGHT: 1.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 39.900 €
Ubicación: Land-: 16 mm<br/>: 13 mm<br/>: 10 mm<br/>: 2.050 mm<br/>: 260 mm<br/>: 260 mm<br/>: 200 mm<br/>: 4.000 mm<br/>: 1.600 mm<br/>: 1.700 mm<br/>: 7,5 kw<br/>: 6.500 kg<br/>standard equipment<br/><br/>fully hydraulic drive of upper roll and lower roll<br/>hydraulic infeed of lower and side roll<br/>digital read-out of lower and side rolls position<br/>conical bending device<br/>hydraulic load relieving of upper roll<br/>hydraulic drop-end bearing  <br/>hardened rolls <br/>2 working speeds<br/>central lubrication system<br/>protection against overload<br/>moveable control pane <br/>user manual in german and english <br/>machine and equipment according to the ce regulations <br/><br/>optional equipment<br/><br/>ground and polished rolls<br/>infinitely adustable speed of rolls<br/>hydraulic/mechanic adjustable upper and lateral supports<br/>aut. material withdrawal<br/>changeable upper roll for especially narrow bending radii<br/><br/>important issues at conical bending: <br/><br/>the max. sheet metal thickness is equivalent to 50 % of nominal capacity <br/>the cone length can be max. 30 % ore must be more than 60 % of roll length <br/>hardened rolls are recommended<br/><br/>(sample photo)<br/><br/>bending capacity without pre-bending at 5x upper tool diam.: 16 mm<br/>bending capacity with pre-bending at 5x upper tool diam.: 13 mm<br/>bending capacity with pre-bending at 1,5x upper tool diam.: 10 mm<br/>bending length: 2.050 mm<br/>upper roll diameter: 260 mm <br/>lower roll diameter: 260 mm  <br/>side roll diameter: 200 mm<br/>working speed: 1,5-6 m/min<br/>length: 4.000 mm <br/>width: 1.600 mm <br/>heigth: 1.700 mm <br/>motor power: 7,5 kw<br/>weight: 6.500 kg<br/><br/><br/><br/> : 16 MM
: 13 MM
: 10 MM
: 2.050 MM
: 260 MM
: 260 MM
: 200 MM
: 4.000 MM
: 1.600 MM
: 1.700 MM
: 7,5 KW
: 6.500 KG
STANDARD EQUIPMENT

FULLY HYDRAULIC DRIVE OF UPPER ROLL AND LOWER ROLL
HYDRAULIC INFEED OF LOWER AND SIDE ROLL
DIGITAL READ-OUT OF LOWER AND SIDE ROLLS POSITION
CONICAL BENDING DEVICE
HYDRAULIC LOAD RELIEVING OF UPPER ROLL
HYDRAULIC DROP-END BEARING 
HARDENED ROLLS
2 WORKING SPEEDS
CENTRAL LUBRICATION SYSTEM
PROTECTION AGAINST OVERLOAD
MOVEABLE CONTROL PANE
USER MANUAL IN GERMAN AND ENGLISH 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

OPTIONAL EQUIPMENT

GROUND AND POLISHED ROLLS
INFINITELY ADUSTABLE SPEED OF ROLLS
HYDRAULIC/MECHANIC ADJUSTABLE UPPER AND LATERAL SUPPORTS
AUT. MATERIAL WITHDRAWAL
CHANGEABLE UPPER ROLL FOR ESPECIALLY NARROW BENDING RADII

IMPORTANT ISSUES AT CONICAL BENDING:

THE MAX. SHEET METAL THICKNESS IS EQUIVALENT TO 50 % OF NOMINAL CAPACITY 
THE CONE LENGTH CAN BE MAX. 30 % ORE MUST BE MORE THAN 60 % OF ROLL LENGTH 
HARDENED ROLLS ARE RECOMMENDED

(SAMPLE PHOTO)

BENDING CAPACITY WITHOUT PRE-BENDING AT 5X UPPER TOOL DIAM.: 16 MM
BENDING CAPACITY WITH PRE-BENDING AT 5X UPPER TOOL DIAM.: 13 MM
BENDING CAPACITY WITH PRE-BENDING AT 1,5X UPPER TOOL DIAM.: 10 MM
BENDING LENGTH: 2.050 MM
UPPER ROLL DIAMETER: 260 MM
LOWER ROLL DIAMETER: 260 MM
SIDE ROLL DIAMETER: 200 MM
WORKING SPEED: 1,5-6 M/MIN
LENGTH: 4.000 MM
WIDTH: 1.600 MM
HEIGTH: 1.700 MM
MOTOR POWER: 7,5 KW
WEIGHT: 6.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-: 30 to<br/>: 3 kw<br/>: 200 mm<br/>: 775 mm<br/>: 125 x 80 mm<br/>: 1.500 mm<br/>: 700 mm<br/>: 1.800 mm<br/>: 400 kg<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo shows mod. hdpm 1040/60)<br/><br/>bending force: 30 to<br/>motor power: 3 kw<br/>stroke: 200 mm<br/>distance between columns: 775 mm<br/>piston Ø: 125 x 80 mm<br/>advance speed: 7,5 mm/s<br/>working speed:	5 mm/s<br/>return speed: 10 mm/s<br/>length: 1.500 mm<br/>width: 700 mm<br/>heigth: 1.800 mm<br/>weight: 400 kg<br/><br/><br/><br/> : 30 TO
: 3 KW
: 200 MM
: 775 MM
: 125 X 80 MM
: 1.500 MM
: 700 MM
: 1.800 MM
: 400 KG
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. HDPM 1040/60)

BENDING FORCE: 30 TO
MOTOR POWER: 3 KW
STROKE: 200 MM
DISTANCE BETWEEN COLUMNS: 775 MM
PISTON Ø: 125 X 80 MM
ADVANCE SPEED: 7,5 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 1.500 MM
WIDTH: 700 MM
HEIGTH: 1.800 MM
WEIGHT: 400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 12.100 €
Ubicación: Land-: 1.000 mm<br/>: 100 to<br/>: 4- v<br/>: 7,5 kw<br/>: 300 mm<br/>: 680 mm<br/>: 1.020 mm<br/>: 6 mm<br/>: 500 x 1.020 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.110 mm<br/>: 1.000 mm<br/>: 2.275 mm<br/>: 1.900 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.000 mm <br/>bending force: 100 to <br/>upper tool: cranked <br/>lower tool: 4-v <br/>motor power: 7,5 kw <br/>stroke: 300 mm <br/>distance ram-table: 680 mm <br/>distance between columns: 1.020 mm <br/>working speed: 5 mm/s <br/>rapid speed: down 9 mm/s up 10 mm/s <br/>bending capacity: 6 mm <br/>table: 500 x 1.020 mm <br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.110 mm <br/>width: 1.000 mm <br/>heigth: 2.275 mm<br/>weight: 1.900 kg<br/><br/><br/><br/> : 1.000 MM
: 100 TO
: 4- V
: 7,5 KW
: 300 MM
: 680 MM
: 1.020 MM
: 6 MM
: 500 X 1.020 MM
: 100 MM
: 190 MM
: 2.110 MM
: 1.000 MM
: 2.275 MM
: 1.900 KG
2 GUIDINGS 
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS 
UPPER AND LOWER PRESSBRAKE TOOL 
MANOMETER 
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED 
PISTON STOPS IN EVERY POSITION 
MANUEL AND 2 HAND WORKING 
TISCH HöHENVERSTELLBAR 
ACCORDING TO CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.000 MM
BENDING FORCE: 100 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 7,5 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 680 MM
DISTANCE BETWEEN COLUMNS: 1.020 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 6 MM
TABLE: 500 X 1.020 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.110 MM
WIDTH: 1.000 MM
HEIGTH: 2.275 MM
WEIGHT: 1.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 5.900 €
Ubicación: Land-: 80 to<br/>: 5,5 kw<br/>: 250 mm<br/>: 1.040 mm<br/>: 200 x 120 mm<br/>: 1.810 mm<br/>: 750 mm<br/>: 2.100 mm<br/>: 835 kg<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo shows mod. hdpm 1040/60)<br/><br/>bending force: 80 to<br/>motor power: 5,5 kw<br/>stroke: 250 mm<br/>distance between columns: 1.040 mm<br/>piston Ø: 200 x 120 mm<br/>advance speed: 8 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 1.810 mm<br/>width: 750 mm<br/>heigth: 2.100 mm<br/>weight: 835 kg<br/><br/><br/><br/> : 80 TO
: 5,5 KW
: 250 MM
: 1.040 MM
: 200 X 120 MM
: 1.810 MM
: 750 MM
: 2.100 MM
: 835 KG
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. HDPM 1040/60)

BENDING FORCE: 80 TO
MOTOR POWER: 5,5 KW
STROKE: 250 MM
DISTANCE BETWEEN COLUMNS: 1.040 MM
PISTON Ø: 200 X 120 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 1.810 MM
WIDTH: 750 MM
HEIGTH: 2.100 MM
WEIGHT: 835 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.100 €
Ubicación: Land-: 60 to<br/>: 4 kw<br/>: 250 mm<br/>: 1.040 mm<br/>: 180 x 120 mm<br/>: 1.710 mm<br/>: 700 mm<br/>: 2.100 mm<br/>: 800 kg<br/>horizontal adjustable cylinder with clamping lever<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 60 to<br/>motor power: 4 kw<br/>stroke: 250 mm<br/>distance between columns: 1.040 mm<br/>piston Ø: 180 x 120 mm<br/>advance speed: 8 mm/s<br/>working speed: 4 mm/s<br/>return speed: 10 mm/s<br/>length: 1.710 mm<br/>width: 700 mm<br/>heigth: 2.100 mm<br/>weight: 800 kg<br/><br/><br/><br/> : 60 TO
: 4 KW
: 250 MM
: 1.040 MM
: 180 X 120 MM
: 1.710 MM
: 700 MM
: 2.100 MM
: 800 KG
HORIZONTAL ADJUSTABLE CYLINDER WITH CLAMPING LEVER
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 60 TO
MOTOR POWER: 4 KW
STROKE: 250 MM
DISTANCE BETWEEN COLUMNS: 1.040 MM
PISTON Ø: 180 X 120 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 4 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 1.710 MM
WIDTH: 700 MM
HEIGTH: 2.100 MM
WEIGHT: 800 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 19.300 €
Ubicación: Land-: 200 to<br/>: 15 kw<br/>: 300 mm<br/>: 1.900 mm<br/>: 320 x 210 mm<br/>: 2.460 mm<br/>: 1.600 mm<br/>: 2.700 mm<br/>: 4.800 kg<br/>horizontal movable cylinder by handwheel<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo shows mod. hdk 1570/150)<br/><br/>bending force: 200 to<br/>motor power: 15 kw<br/>stroke: 300 mm<br/>distance between columns:	1.900 mm<br/>piston Ø: 320 x 210 mm<br/>advance speed: 10 mm/s<br/>working speed: 5 mm/s<br/>return speed: 20 mm/s<br/>length: 2.460 mm<br/>width: 1.600 mm<br/>heigth: 2.700 mm<br/>weight: 4.800 kg<br/><br/><br/><br/> : 200 TO
: 15 KW
: 300 MM
: 1.900 MM
: 320 X 210 MM
: 2.460 MM
: 1.600 MM
: 2.700 MM
: 4.800 KG
HORIZONTAL MOVABLE CYLINDER BY HANDWHEEL
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. HDK 1570/150)

BENDING FORCE: 200 TO
MOTOR POWER: 15 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.900 MM
PISTON Ø: 320 X 210 MM
ADVANCE SPEED: 10 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 20 MM/S
LENGTH: 2.460 MM
WIDTH: 1.600 MM
HEIGTH: 2.700 MM
WEIGHT: 4.800 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 12.900 €
Ubicación: Land-: 40 to<br/>: 250 mm<br/>: 4 kw<br/>: 120 / 370 mm<br/>: 55 / 63 mm<br/>: 120 mm<br/>: 70 lt<br/>: 1.150 mm<br/>: 700 mm<br/>: 950 mm<br/>: 920 kg<br/>hydraulik system under the table <br/>stroke adjustment possible under pressure <br/>2-hand and foot pedal operating <br/>central lubrication <br/>pressbrake tool<br/><br/>press force: 40 to<br/>stroke: 250 mm<br/>approach speed: 1,750 mm/min<br/>working speed: 470 mm/min<br/>return speed: 2,000 mm/min<br/>motor: 4 kw<br/>dist. betw. pins min/max: 120 / 370 mm<br/>pin diameter fixed/moveable: 55 / 63 mm<br/>height of pins: 120 mm<br/>oil tank: 70 lt<br/>length: 1,150 mm<br/>width: 700 mm<br/>height: 950 mm<br/>weight: 920 kg<br/><br/><br/><br/> : 40 TO
: 250 MM
: 4 KW
: 120 / 370 MM
: 55 / 63 MM
: 120 MM
: 70 LT
: 1.150 MM
: 700 MM
: 950 MM
: 920 KG
HYDRAULIK SYSTEM UNDER THE TABLE
STROKE ADJUSTMENT POSSIBLE UNDER PRESSURE
2-HAND AND FOOT PEDAL OPERATING
CENTRAL LUBRICATION
PRESSBRAKE TOOL

PRESS FORCE: 40 TO
STROKE: 250 MM
APPROACH SPEED: 1,750 MM/MIN
WORKING SPEED: 470 MM/MIN
RETURN SPEED: 2,000 MM/MIN
MOTOR: 4 KW
DIST. BETW. PINS MIN/MAX: 120 / 370 MM
PIN DIAMETER FIXED/MOVEABLE: 55 / 63 MM
HEIGHT OF PINS: 120 MM
OIL TANK: 70 LT
LENGTH: 1,150 MM
WIDTH: 700 MM
HEIGHT: 950 MM
WEIGHT: 920 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 5.300 €
Ubicación: Land-: 30 to<br/>: 3 kw<br/>: 200 mm<br/>: 775 mm<br/>: 125 x 80 mm<br/>: 1.500 mm<br/>: 700 mm<br/>: 1.800 mm<br/>: 400 kg<br/>horizontal adjustable cylinder with clamping lever<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 30 to<br/>motor power: 3 kw<br/>stroke: 200 mm<br/>distance between columns: 775 mm<br/>piston Ø: 125 x 80 mm<br/>advance speed: 7,5 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 1.500 mm<br/>width: 700 mm<br/>heigth: 1.800 mm<br/>weight: 400 kg<br/><br/><br/><br/> : 30 TO
: 3 KW
: 200 MM
: 775 MM
: 125 X 80 MM
: 1.500 MM
: 700 MM
: 1.800 MM
: 400 KG
HORIZONTAL ADJUSTABLE CYLINDER WITH CLAMPING LEVER
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 30 TO
MOTOR POWER: 3 KW
STROKE: 200 MM
DISTANCE BETWEEN COLUMNS: 775 MM
PISTON Ø: 125 X 80 MM
ADVANCE SPEED: 7,5 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 1.500 MM
WIDTH: 700 MM
HEIGTH: 1.800 MM
WEIGHT: 400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 10.400 €
Ubicación: Land-: 60 mm<br/>: 215 mm<br/>: 215 mm<br/>: 1,5 kw<br/>: 1.000 mm<br/>: 1.400 mm<br/>: 1.650 mm<br/>: 950 kg<br/>3 mech. driven rolls (brake motor)<br/>hardened shafts  <br/>top roll hydraulic adjustable <br/>hardened universal rolls <br/>lateral rolls adjustable in 1 axis <br/>horizontal and vertical operation <br/>double foot pedal for for- and backward drive <br/>machine and equipment according to the ce regulations <br/>user manual in german and english<br/><br/>we have more than 260 references!<br/><br/>shaft diameter: 60 mm <br/>top roll diameter: 215 mm<br/>lower roll diameter: 215 mm<br/>driven roll: 3 <br/>motor power:  1,5 kw <br/>speed: 4 m/min  <br/>bending capacity (section / min. diameter):<br/>flat steel vertical position: 80x20 mm / 1200 mm, 40x10 mm / 400 mm<br/>flat steel horizontal position: 120x25 mm / 600 mm, 50 x 10 mm / 400 mm<br/>square bar: 50x50 mm / 800 mm, 20x20 mm / 400 mm <br/>round bar: Ø 50 mm / 800 mm, Ø 20 mm / 400 mm<br/>tube: Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3",x3,2 mm / 1600 mm, 1",x2,6 mm / 500 mm<br/>form tube vertical position: 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm<br/>form tube square: 70x3 mm / 1600 mm, 40x2 mm / 500 mm <br/>angle leg outside: 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm  <br/>angle leg inside: 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm<br/>length: 1.000 mm<br/>width: 1.400 mm<br/>heigth: 1.650 mm<br/>weight: 950 kg<br/><br/><br/><br/> : 60 MM
: 215 MM
: 215 MM
: 1,5 KW
: 1.000 MM
: 1.400 MM
: 1.650 MM
: 950 KG
3 MECH. DRIVEN ROLLS (BRAKE MOTOR)
HARDENED SHAFTS  
TOP ROLL HYDRAULIC ADJUSTABLE 
HARDENED UNIVERSAL ROLLS 
LATERAL ROLLS ADJUSTABLE IN 1 AXIS 
HORIZONTAL AND VERTICAL OPERATION 
DOUBLE FOOT PEDAL FOR FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

WE HAVE MORE THAN 260 REFERENCES!

SHAFT DIAMETER: 60 MM
TOP ROLL DIAMETER: 215 MM
LOWER ROLL DIAMETER: 215 MM
DRIVEN ROLL: 3
MOTOR POWER: 1,5 KW
SPEED: 4 M/MIN
BENDING CAPACITY (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 80X20 MM / 1200 MM, 40X10 MM / 400 MM
FLAT STEEL HORIZONTAL POSITION: 120X25 MM / 600 MM, 50 X 10 MM / 400 MM
SQUARE BAR: 50X50 MM / 800 MM, 20X20 MM / 400 MM
ROUND BAR: Ø 50 MM / 800 MM, Ø 20 MM / 400 MM
TUBE: Ø 100X2 MM / 1600 MM, Ø 60X2 MM / 500 MM, 3",X3,2 MM / 1600 MM, 1",X2,6 MM / 500 MM
FORM TUBE VERTICAL POSITION: 80X40X3 MM / 1400 MM, 40X20X2 MM / 500 MM
FORM TUBE SQUARE: 70X3 MM / 1600 MM, 40X2 MM / 500 MM
ANGLE LEG OUTSIDE: 70X70X7 MM / 1000 MM, 40X40X5 MM / 500 MM
ANGLE LEG INSIDE: 70X70X7 MM / 1200 MM, 40X40X5 MM / 600 MM
LENGTH: 1.000 MM
WIDTH: 1.400 MM
HEIGTH: 1.650 MM
WEIGHT: 950 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-: 1.000 mm<br/>: 150 to<br/>: 4- v<br/>: 11 kw<br/>: 300 mm<br/>: 610 mm<br/>: 1.020 mm<br/>: 8 mm<br/>: 600 x 1.020 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.110 mm<br/>: 1.000 mm<br/>: 2.450 mm<br/>: 2.400 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.000 mm <br/>bending force: 150 to <br/>upper tool: cranked <br/>lower tool: 4-v <br/>motor power: 11 kw <br/>stroke: 300 mm <br/>distance ram-table: 610 mm <br/>distance between columns: 1.020 mm <br/>working speed: 5 mm/s <br/>rapid speed: down 9 mm/s up 10 mm/s <br/>bending capacity: 8 mm <br/>table: 600 x 1.020 mm <br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.110 mm <br/>width: 1.000 mm <br/>heigth: 2.450 mm<br/>weight: 2.400 kg<br/><br/><br/><br/> : 1.000 MM
: 150 TO
: 4- V
: 11 KW
: 300 MM
: 610 MM
: 1.020 MM
: 8 MM
: 600 X 1.020 MM
: 100 MM
: 190 MM
: 2.110 MM
: 1.000 MM
: 2.450 MM
: 2.400 KG
2 GUIDINGS 
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS 
UPPER AND LOWER PRESSBRAKE TOOL 
MANOMETER 
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED 
PISTON STOPS IN EVERY POSITION 
MANUEL AND 2 HAND WORKING 
TISCH HöHENVERSTELLBAR 
ACCORDING TO CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.000 MM
BENDING FORCE: 150 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 11 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 610 MM
DISTANCE BETWEEN COLUMNS: 1.020 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 8 MM
TABLE: 600 X 1.020 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.110 MM
WIDTH: 1.000 MM
HEIGTH: 2.450 MM
WEIGHT: 2.400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-: 3 mm<br/>: 2 mm<br/>: 1.050 mm<br/>: 90 mm<br/>: 2.080 mm<br/>: 700 mm<br/>: 1.250 mm<br/>: 410 kg<br/>asymetric rolls <br/>2 rolls driven by handwheel<br/>lateral roll adjustable by handwheel <br/>tiltable upper roll <br/>conical rolling device <br/>longitudinal grooves in lower and lateral roll <br/>user manual in german<br/><br/>extra: hardened rolls euro 600,--<br/><br/><br/>(sample photo shows mod. rs 1270 x 90)<br/><br/>bending capacity: 3 mm <br/>prebending: 2 mm <br/>bending length: 1.050 mm <br/>roll diameter: 90 mm<br/>length: 2.080 mm <br/>width: 700 mm <br/>heigth: 1.250 mm<br/>weight: 410 kg<br/><br/><br/><br/> : 3 MM
: 2 MM
: 1.050 MM
: 90 MM
: 2.080 MM
: 700 MM
: 1.250 MM
: 410 KG
ASYMETRIC ROLLS 
2 ROLLS DRIVEN BY HANDWHEEL
LATERAL ROLL ADJUSTABLE BY HANDWHEEL 
TILTABLE UPPER ROLL 
CONICAL ROLLING DEVICE
LONGITUDINAL GROOVES IN LOWER AND LATERAL ROLL 
USER MANUAL IN GERMAN

EXTRA: HARDENED ROLLS EURO 600,--


(SAMPLE PHOTO SHOWS MOD. RS 1270 X 90)

BENDING CAPACITY: 3 MM
PREBENDING: 2 MM
BENDING LENGTH: 1.050 MM
ROLL DIAMETER: 90 MM
LENGTH: 2.080 MM
WIDTH: 700 MM
HEIGTH: 1.250 MM
WEIGHT: 410 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 20.000 €
Ubicación: Land-: 90 mm<br/>: 260 mm<br/>: 5,5 kw<br/>: 1.700 mm<br/>: 1.450 mm<br/>: 1.200 mm<br/>: 2.800 ~  kg<br/>4 roll machine<br/>3 hydraulic driven rolls <br/>strong welded steel construction <br/>bottom and lateral rolls hydr. adjustable <br/>seperate control panel with digital readout<br/>horizontal and vertical operation <br/>for- and backward drive <br/>machine and equipment according to the ce regulations <br/> <br/>we have more than 260 references!<br/><br/>shaft diameter: 90 mm <br/>roll diameter: 260 mm <br/>driven roll: 3 <br/>motor power: 5,5 kw<br/>speed: 6,37 m/min. <br/>bending capacities (section / min. diameter): <br/>flat steel vertical position: 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 mm / 300 mm<br/>flat steel horizontal position: 125x25 mm / 600 mm, 60x5 mm / 300 mm<br/>square bar: 45x45 mm / 500 mm, 15x15 mm / 380 mm<br/>round bar:	Ø 50 mm / 500 mm, Ø 15 mm / 380 mm<br/>tube:	Ø 100x2,5 mm / 1200 mm, Ø 15x1,5 mm / 380 mm, Ø 3?x5,48 / 800 mm, Ø 1/2?x2,77 / 380 mm<br/>form tube vertical position:	80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm<br/>form tube horizontal position: 70x3 mm / 1300 mm, 25x2 mm / 400 mm<br/>angle leg outside: 80x80x8 mm / 800 mm, 30x30x3 mm /450 mm<br/>angle leg inside:	70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm<br/>upn leg outside: upn 140 / 1600 mm, upn 120 / 900, upn 100 / 600<br/>upn leg inside: upn 140 / 1600 mm, upn 120 / 1000, upn 100 / 800<br/>ipn horizontal position: ipn 120 / 600 mm, upn 80 / 400<br/>length: 1.700 mm<br/>width: 1.450 mm<br/>heigth: 1.200 mm<br/>weight: ~ 2.800 kg<br/><br/><br/><br/> : 90 MM
: 260 MM
: 5,5 KW
: 1.700 MM
: 1.450 MM
: 1.200 MM
: 2.800 ~ KG
4 ROLL MACHINE
3 HYDRAULIC DRIVEN ROLLS
STRONG WELDED STEEL CONSTRUCTION
BOTTOM AND LATERAL ROLLS HYDR. ADJUSTABLE
SEPERATE CONTROL PANEL WITH DIGITAL READOUT
HORIZONTAL AND VERTICAL OPERATION
FOR- AND BACKWARD DRIVE
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

WE HAVE MORE THAN 260 REFERENCES!

SHAFT DIAMETER: 90 MM
ROLL DIAMETER: 260 MM
DRIVEN ROLL: 3
MOTOR POWER: 5,5 KW
SPEED: 6,37 M/MIN.
BENDING CAPACITIES (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 100X20 MM / 2000 MM, 80X20 MM / 800 MM, 30X10 MM / 300 MM
FLAT STEEL HORIZONTAL POSITION: 125X25 MM / 600 MM, 60X5 MM / 300 MM
SQUARE BAR: 45X45 MM / 500 MM, 15X15 MM / 380 MM
ROUND BAR: Ø 50 MM / 500 MM, Ø 15 MM / 380 MM
TUBE: Ø 100X2,5 MM / 1200 MM, Ø 15X1,5 MM / 380 MM, Ø 3?X5,48 / 800 MM, Ø 1/2?X2,77 / 380 MM
FORM TUBE VERTICAL POSITION: 80X25X3 MM / 800 MM, 25X15X2 MM / 350 MM
FORM TUBE HORIZONTAL POSITION: 70X3 MM / 1300 MM, 25X2 MM / 400 MM
ANGLE LEG OUTSIDE: 80X80X8 MM / 800 MM, 30X30X3 MM /450 MM
ANGLE LEG INSIDE: 70X70X7 MM / 700 MM, 30X30X3 MM / 450 MM
UPN LEG OUTSIDE: UPN 140 / 1600 MM, UPN 120 / 900, UPN 100 / 600
UPN LEG INSIDE: UPN 140 / 1600 MM, UPN 120 / 1000, UPN 100 / 800
IPN HORIZONTAL POSITION: IPN 120 / 600 MM, UPN 80 / 400
LENGTH: 1.700 MM
WIDTH: 1.450 MM
HEIGTH: 1.200 MM
WEIGHT: ~ 2.800 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 32.500 €
Ubicación: Land-: 100 to<br/>: 263 bar<br/>: 1100 x 600 mm<br/>: 680 x 420 mm<br/>: 120 mm<br/>: 300 mm<br/>: 500 mm<br/>: 7,5 kw<br/>: 1.900 mm<br/>: 1.300 mm<br/>: 2.750 mm<br/>: 5.400 kg<br/>front light guard <br/>pressure adjustment<br/>2-hand operating<br/>t-slots in table and ram<br/>stroke adjustment<br/>2 ram round guidings<br/>according to ",ce", regulation<br/> <br/><br/>press force: 100 to<br/>hydraulic pressure: 263 bar<br/>table: 1100 x 600 mm<br/>ram dimension: 680 x 420 mm<br/>hole in table: 120 mm<br/>stroke: 300 mm<br/>distance ram-table: 500 mm<br/>rapid speed: 17,5 mm/s<br/>working speed: 5,5 mm/s<br/>return speed: 37 mm/s<br/>motor: 7,5 kw<br/>length: 1.900 mm<br/>width: 1.300 mm<br/>heigth: 2.750 mm<br/>weight: 5.400 kg<br/><br/><br/><br/> : 100 TO
: 263 BAR
: 1100 X 600 MM
: 680 X 420 MM
: 120 MM
: 300 MM
: 500 MM
: 7,5 KW
: 1.900 MM
: 1.300 MM
: 2.750 MM
: 5.400 KG
FRONT LIGHT GUARD
PRESSURE ADJUSTMENT
2-HAND OPERATING
T-SLOTS IN TABLE AND RAM
STROKE ADJUSTMENT
2 RAM ROUND GUIDINGS
ACCORDING TO ",CE", REGULATION
 

PRESS FORCE: 100 TO
HYDRAULIC PRESSURE: 263 BAR
TABLE: 1100 X 600 MM
RAM DIMENSION: 680 X 420 MM
HOLE IN TABLE: 120 MM
STROKE: 300 MM
DISTANCE RAM-TABLE: 500 MM
RAPID SPEED: 17,5 MM/S
WORKING SPEED: 5,5 MM/S
RETURN SPEED: 37 MM/S
MOTOR: 7,5 KW
LENGTH: 1.900 MM
WIDTH: 1.300 MM
HEIGTH: 2.750 MM
WEIGHT: 5.400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 11.600 €
Ubicación: Land-: 100 to<br/>: 7,5 kw<br/>: 300 mm<br/>: 680 mm<br/>: 1.020 mm<br/>: 500 x 1.020 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.110 mm<br/>: 1.000 mm<br/>: 2.350 mm<br/>: 1.985 kg<br/>2 guidings <br/>upper plate with t-slots<br/>table plate with t-slots<br/>manometer<br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>table height adjustable<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 100 to <br/>motor power: 7,5 kw <br/>stroke: 300 mm <br/>distance ram-table: 680 mm <br/>distance between columns: 1.020 mm <br/>working speed: 5 mm/s <br/>rapid speed: down 8 mm/s up 10 mm/s <br/>table: 500 x 1.020 mm <br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.110 mm <br/>width: 1.000 mm <br/>heigth: 2.350 mm<br/>weight: 1.985 kg<br/><br/><br/><br/> : 100 TO
: 7,5 KW
: 300 MM
: 680 MM
: 1.020 MM
: 500 X 1.020 MM
: 100 MM
: 190 MM
: 2.110 MM
: 1.000 MM
: 2.350 MM
: 1.985 KG
2 GUIDINGS 
UPPER PLATE WITH T-SLOTS
TABLE PLATE WITH T-SLOTS
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION 
MANUEL AND 2 HAND WORKING
TABLE HEIGHT ADJUSTABLE
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 100 TO
MOTOR POWER: 7,5 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 680 MM
DISTANCE BETWEEN COLUMNS: 1.020 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 8 MM/S UP 10 MM/S
TABLE: 500 X 1.020 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.110 MM
WIDTH: 1.000 MM
HEIGTH: 2.350 MM
WEIGHT: 1.985 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-: 1.500 mm<br/>: 100 to<br/>: 4- v<br/>: 7,5 kw<br/>: 300 mm<br/>: 680 mm<br/>: 1.520 mm<br/>: 6 mm<br/>: 500 x 1.520 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.275 mm<br/>: 2.500 kg<br/>2 guidings <br/>big upper tool holder and table with t-slots <br/>upper and lower pressbrake tool <br/>manometer <br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>tisch höhenverstellbar <br/>according to ce regulations <br/>user manual in german and english<br/><br/>(sample photos)<br/><br/>bending length: 1.500 mm<br/>bending force: 100 to<br/>upper tool: cranked<br/>lower tool: 4-v<br/>motor power: 7,5 kw<br/>stroke: 300 mm<br/>distance ram-table: 680 mm<br/>distance between columns: 1.520 mm<br/>working speed: 5 mm/s<br/>rapid speed: down 9 mm/s up 10 mm/s<br/>bending capacity: 6 mm<br/>table: 500 x 1.520 mm<br/>hole in table: 100 mm<br/>hole distance: 190 mm<br/>length: 2.630 mm<br/>width: 1.000 mm<br/>heigth: 2.275 mm<br/>weight: 2.500 kg<br/><br/><br/><br/> : 1.500 MM
: 100 TO
: 4- V
: 7,5 KW
: 300 MM
: 680 MM
: 1.520 MM
: 6 MM
: 500 X 1.520 MM
: 100 MM
: 190 MM
: 2.630 MM
: 1.000 MM
: 2.275 MM
: 2.500 KG
2 GUIDINGS
BIG UPPER TOOL HOLDER AND TABLE WITH T-SLOTS
UPPER AND LOWER PRESSBRAKE TOOL
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION
MANUEL AND 2 HAND WORKING
TISCH HöHENVERSTELLBAR
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

BENDING LENGTH: 1.500 MM
BENDING FORCE: 100 TO
UPPER TOOL: CRANKED
LOWER TOOL: 4-V
MOTOR POWER: 7,5 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 680 MM
DISTANCE BETWEEN COLUMNS: 1.520 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 9 MM/S UP 10 MM/S
BENDING CAPACITY: 6 MM
TABLE: 500 X 1.520 MM
HOLE IN TABLE: 100 MM
HOLE DISTANCE: 190 MM
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.275 MM
WEIGHT: 2.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.900 €
Ubicación: Land-: 50 mm<br/>: 152 mm<br/>: 162 mm<br/>: 1,1 kw<br/>: 810 mm<br/>: 950 mm<br/>: 1500 mm<br/>: 500 kg<br/>3 mech. driven rolls (brake motor)<br/>hardened shafts  <br/>top roll hydraulic adjustable <br/>hardened universal rolls <br/>lateral rolls adjustable in 1 axis <br/>horizontal and vertical operation <br/>double foot pedal for for- and backward drive <br/>machine and equipment according to the ce regulations <br/>user manual in german and english<br/><br/>we have more than 210 references!<br/><br/>shaft diameter: 50 mm <br/>top roll diameter: 152 mm <br/>driven roll: 3 <br/>motor power: 1,1 kw <br/>speed: 4,5 m/min  <br/>bending capacity (section / min. diameter):<br/>flat steel vertical position: 60x10 mm / 600 mm, 20x10 mm / 300 mm <br/>flat steel horizontal position: 100x15 mm / 600 mm, 50 x 10 mm / 300 mm <br/>square bar: 35x35 mm / 600 mm, 15x15 mm / 300 mm <br/>round bar: dm. 35 mm / 600 mm, dm. 20 mm / 300 mm <br/>tube: dm. 70x2 mm / 1200 mm, dm. 25x1,5 mm / 400 mm, 2",x2,9 mm / 1000 mm, 1/2",x2,3 mm / 350 mm<br/>form tube vertical position: 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm <br/>form tube square: 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm <br/>angle leg outside: 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm <br/>angle leg inside: 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm<br/>length: 810 mm<br/>width: 950 mm<br/>heigth: 1500 mm<br/>weight: 500 kg<br/><br/><br/><br/> : 50 MM
: 152 MM
: 162 MM
: 1,1 KW
: 810 MM
: 950 MM
: 1500 MM
: 500 KG
3 MECH. DRIVEN ROLLS (BRAKE MOTOR)
HARDENED SHAFTS  
TOP ROLL HYDRAULIC ADJUSTABLE 
HARDENED UNIVERSAL ROLLS 
LATERAL ROLLS ADJUSTABLE IN 1 AXIS 
HORIZONTAL AND VERTICAL OPERATION 
DOUBLE FOOT PEDAL FOR FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

WE HAVE MORE THAN 210 REFERENCES!

SHAFT DIAMETER: 50 MM
TOP ROLL DIAMETER: 152 MM
DRIVEN ROLL: 3
MOTOR POWER: 1,1 KW
SPEED: 4,5 M/MIN
BENDING CAPACITY (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 60X10 MM / 600 MM, 20X10 MM / 300 MM
FLAT STEEL HORIZONTAL POSITION: 100X15 MM / 600 MM, 50 X 10 MM / 300 MM
SQUARE BAR: 35X35 MM / 600 MM, 15X15 MM / 300 MM
ROUND BAR: DM. 35 MM / 600 MM, DM. 20 MM / 300 MM
TUBE: DM. 70X2 MM / 1200 MM, DM. 25X1,5 MM / 400 MM, 2",X2,9 MM / 1000 MM, 1/2",X2,3 MM / 350 MM
FORM TUBE VERTICAL POSITION: 70X30X3 MM / 1500 MM, 30X15X2 MM / 400 MM
FORM TUBE SQUARE: 50X50X3 MM / 1600 MM, 20X20X2 MM / 400 MM
ANGLE LEG OUTSIDE: 50X50X6 MM / 600 MM, 30X30X3 MM / 400 MM
ANGLE LEG INSIDE: 50X50X6 MM / 900 MM, 30X30X3 MM / 600 MM
LENGTH: 810 MM
WIDTH: 950 MM
HEIGTH: 1500 MM
WEIGHT: 500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 34.800 €
Ubicación: Land-: 120 mm<br/>: 390 mm<br/>: 15 kw<br/>: 2.000 mm<br/>: 1.650 mm<br/>: 1.900 mm<br/>: 4.770 kg<br/>3 rolls driven (hydromotor and planetary gearbox)<br/>shafts made of special steel, hardened and ground <br/>hydraulic adjustment of the 2 lower rolls <br/>hardened universal rolls <br/>lateral rolls hydraulic adjustable in 3 axes <br/>horizontal and vertical operation <br/>mobile operating panel<br/>2 working speeds<br/>digital read out (3 axes)<br/>machine and equipment according to the ce regulations <br/>user manual in german and english<br/><br/>we have more than 210 references!<br/><br/>wellendurchmesser: 120 mm <br/>rollendurchmesser: 390 mm <br/>angetriebene walzen: 3 <br/>motorleistung: 15 kw <br/>geschwindigkeit:  2 / 7,5 u/min <br/>bending capacity (section / min. diameter):<br/>flat steel vertical position: 125x25 mm / 1.200 mm, 30x10 mm / 500 mm <br/>flat steel horizontal position: 200x50 mm / 1.000 mm, 100x10 mm / 500 mm <br/>square bar: 65x65 mm / 750 mm, 20x20 mm / 500 mm <br/>round bar: Ø 80 mm / 850 mm, Ø 20 mm / 500 mm <br/>tube: Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5",x6,35 / 1.500 mm, Ø 3/4",x2,87 / 500 mm<br/>form tube vertical position: 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm <br/>form tube horizontal position: 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm <br/>angle leg outside: 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm <br/>angle leg inside: 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm <br/>upn leg outside: upn 220 / 1.000 mm,  upn 180/800 mm, upn 40/500 mm<br/>upn leg inside: upn 220 / 1.200 mm, upn 180 / 900 mm, upn 40 / 600 mm<br/>ipn horizontal position: ipn 220 / 1.000 mm, ipn 80 / 500 mm<br/>ipn vertical position: ipn 160 / 5.000 mm, ipn 140 / 4.000 mm, ipn 80 / 1.200 mm<br/>length: 2.000 mm <br/>width: 1.650 mm <br/>height: 1.900 mm <br/>weight: 4.770 kg<br/><br/><br/><br/> : 120 MM
: 390 MM
: 15 KW
: 2.000 MM
: 1.650 MM
: 1.900 MM
: 4.770 KG
3 ROLLS DRIVEN (HYDROMOTOR AND PLANETARY GEARBOX)
SHAFTS MADE OF SPECIAL STEEL, HARDENED AND GROUND 
HYDRAULIC ADJUSTMENT OF THE 2 LOWER ROLLS 
HARDENED UNIVERSAL ROLLS 
LATERAL ROLLS HYDRAULIC ADJUSTABLE IN 3 AXES 
HORIZONTAL AND VERTICAL OPERATION 
MOBILE OPERATING PANEL
2 WORKING SPEEDS
DIGITAL READ OUT (3 AXES)
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

WE HAVE MORE THAN 210 REFERENCES!

WELLENDURCHMESSER: 120 MM
ROLLENDURCHMESSER: 390 MM
ANGETRIEBENE WALZEN: 3
MOTORLEISTUNG: 15 KW
GESCHWINDIGKEIT: 2 / 7,5 U/MIN
BENDING CAPACITY (SECTION / MIN. DIAMETER):
FLAT STEEL VERTICAL POSITION: 125X25 MM / 1.200 MM, 30X10 MM / 500 MM
FLAT STEEL HORIZONTAL POSITION: 200X50 MM / 1.000 MM, 100X10 MM / 500 MM
SQUARE BAR: 65X65 MM / 750 MM, 20X20 MM / 500 MM
ROUND BAR: Ø 80 MM / 850 MM, Ø 20 MM / 500 MM
TUBE: Ø 160X4 MM / 2.800 MM, Ø 140X3 MM / 1.500 MM, Ø 50X2 MM / 500 MM, Ø 5",X6,35 / 1.500 MM, Ø 3/4",X2,87 / 500 MM
FORM TUBE VERTICAL POSITION: 120X40X4 MM / 1.800 MM, 30X20X3 MM / 500 MM
FORM TUBE HORIZONTAL POSITION: 90X90X5 MM / 1.800 MM, 30X30X3 MM / 500 MM
ANGLE LEG OUTSIDE: 120X120X12 MM / 1.200 MM, 40X40X4 MM / 600 MM
ANGLE LEG INSIDE: 100X100X10 MM / 1.200 MM, 40X40X4 MM / 600 MM
UPN LEG OUTSIDE: UPN 220 / 1.000 MM, UPN 180/800 MM, UPN 40/500 MM
UPN LEG INSIDE: UPN 220 / 1.200 MM, UPN 180 / 900 MM, UPN 40 / 600 MM
IPN HORIZONTAL POSITION: IPN 220 / 1.000 MM, IPN 80 / 500 MM
IPN VERTICAL POSITION: IPN 160 / 5.000 MM, IPN 140 / 4.000 MM, IPN 80 / 1.200 MM
LENGTH: 2.000 MM
WIDTH: 1.650 MM
HEIGHT: 1.900 MM
WEIGHT: 4.770 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 55.700 €
Ubicación: Land-: 150 to<br/>: 254 bar<br/>: 1200 x 750 mm<br/>: 950 x 650 mm<br/>: 120 mm<br/>: 500 mm<br/>: 750 mm<br/>: 11 kw<br/>: 540 x 720 mm<br/>: 2.225 mm<br/>: 1.600 mm<br/>: 3.850 mm<br/>: 10.000 kg<br/>light curtain<br/>cushion<br/>manual and automatic working <br/>manual stroke adjustment by camshaft switch<br/>maintenance free self lubricating 4-fold ram guiding<br/>polster plate with t-slots <br/>according to ",ce", rules<br/>(sample photo)<br/><br/>press force: 150 to<br/>hydraulic pressure: 254 bar<br/>table: 1200 x 750 mm<br/>ram dimension: 900 x 600 mm<br/>hole in table: 120 mm<br/>stroke: 500 mm<br/>distance ram-table: 750 mm<br/>rapid speed: 100 mm/s<br/>working speed: 5,5 mm/s<br/>return speed: 165 mm/s<br/>motor: 11 kw<br/>cushion: force 32 to, stroke 200 mm, pressure 160 bar, return speed 40 mm/s<br/>dimension: 540 x 720 mm<br/>length: 2.225 mm<br/>width: 1.600 mm<br/>heigth: 3.850 mm<br/>weight: 10.000 kg<br/><br/><br/><br/> : 150 TO
: 254 BAR
: 1200 X 750 MM
: 950 X 650 MM
: 120 MM
: 500 MM
: 750 MM
: 11 KW
: 540 X 720 MM
: 2.225 MM
: 1.600 MM
: 3.850 MM
: 10.000 KG
LIGHT CURTAIN
CUSHION
MANUAL AND AUTOMATIC WORKING
MANUAL STROKE ADJUSTMENT BY CAMSHAFT SWITCH
MAINTENANCE FREE SELF LUBRICATING 4-FOLD RAM GUIDING
POLSTER PLATE WITH T-SLOTS
ACCORDING TO ",CE", RULES
(SAMPLE PHOTO)

PRESS FORCE: 150 TO
HYDRAULIC PRESSURE: 254 BAR
TABLE: 1200 X 750 MM
RAM DIMENSION: 900 X 600 MM
HOLE IN TABLE: 120 MM
STROKE: 500 MM
DISTANCE RAM-TABLE: 750 MM
RAPID SPEED: 100 MM/S
WORKING SPEED: 5,5 MM/S
RETURN SPEED: 165 MM/S
MOTOR: 11 KW
CUSHION: FORCE 32 TO, STROKE 200 MM, PRESSURE 160 BAR, RETURN SPEED 40 MM/S
DIMENSION: 540 X 720 MM
LENGTH: 2.225 MM
WIDTH: 1.600 MM
HEIGTH: 3.850 MM
WEIGHT: 10.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 13.000 €
Ubicación: Land-: 100 to<br/>: 7,5 kw<br/>: 300 mm<br/>: 680 mm<br/>: 1.520 mm<br/>: 500 x 1.520 mm<br/>: 100 mm<br/>: 190 mm<br/>: 2.630 mm<br/>: 1.000 mm<br/>: 2.350 mm<br/>: 2.500 kg<br/>2 guidings <br/>upper plate with t-slots<br/>table plate with t-slots<br/>manometer<br/>rapid down move with automtic change to working speed <br/>piston stops in every position <br/>manuel and 2 hand working <br/>table height adjustable<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo)<br/><br/>bending force: 100 to <br/>motor power: 7,5 kw <br/>stroke: 300 mm <br/>distance ram-table: 680 mm <br/>distance between columns: 1.520 mm <br/>working speed: 5 mm/s <br/>rapid speed: down 8 mm/s up 10 mm/s <br/>table: 500 x 1.520 mm <br/>hole in table: 190 mm <br/>length: 2.630 mm <br/>width: 1.000 mm <br/>heigth: 2.350 mm<br/>weight: 2.500 kg<br/><br/><br/><br/> : 100 TO
: 7,5 KW
: 300 MM
: 680 MM
: 1.520 MM
: 500 X 1.520 MM
: 100 MM
: 190 MM
: 2.630 MM
: 1.000 MM
: 2.350 MM
: 2.500 KG
2 GUIDINGS 
UPPER PLATE WITH T-SLOTS
TABLE PLATE WITH T-SLOTS
MANOMETER
RAPID DOWN MOVE WITH AUTOMTIC CHANGE TO WORKING SPEED
PISTON STOPS IN EVERY POSITION 
MANUEL AND 2 HAND WORKING
TABLE HEIGHT ADJUSTABLE
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO)

BENDING FORCE: 100 TO
MOTOR POWER: 7,5 KW
STROKE: 300 MM
DISTANCE RAM-TABLE: 680 MM
DISTANCE BETWEEN COLUMNS: 1.520 MM
WORKING SPEED: 5 MM/S
RAPID SPEED: DOWN 8 MM/S UP 10 MM/S
TABLE: 500 X 1.520 MM
HOLE IN TABLE: 190 MM
LENGTH: 2.630 MM
WIDTH: 1.000 MM
HEIGTH: 2.350 MM
WEIGHT: 2.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 71.100 €
Ubicación: Land-: 25 mm<br/>: 20 mm<br/>: 20 mm<br/>: 16 mm<br/>: 2.550 mm<br/>: 350 mm<br/>: 350 mm<br/>: 260 mm<br/>: 5.500 mm<br/>: 2.000 mm<br/>: 1.900 mm<br/>: 22 kw<br/>: 13.000 kg<br/>standard equipment<br/><br/>fully hydraulic drive of upper- and side rolls<br/>hydraulic infeed of lower- and side rolls<br/>digital read-out of lower and side rolls position<br/>conical bending device<br/>hydraulic load relieving of upper roll<br/>hydraulic drop-end bearing  <br/>hardened rolls <br/>2 working speeds<br/>central lubrication system<br/>protection against overload<br/>moveable control pane <br/>user manual in german and english <br/>machine and equipment according to the ce regulations <br/><br/>optional equipment<br/><br/>ground and polished rolls<br/>infinitely adustable speed of rolls<br/>hydraulic/mechanic adjustable upper and lateral supports<br/>aut. material withdrawal<br/>changeable upper roll for especially narrow bending radii<br/><br/>important issues at conical bending: <br/><br/>the max. sheet metal thickness is equivalent to 50 % of nominal capacity <br/>the cone length can be max. 30 % ore must be more than 60 % of roll length <br/>hardened rolls are recommended<br/><br/>(sample photo)<br/><br/>bending capacity without pre-bending at 5x upper tool diam.:  25 mm<br/>bending capacity with pre-bending at 5x upper tool diam.:  20 mm<br/>bending capacity without pre-bending at 1,5x upper tool diam.: 20 mm<br/>bending capacity with pre-bending at 1,5x upper tool diam.: 16 mm<br/>bending length: 2.550 mm<br/>upper roll diameter: 350 mm  <br/>lower roll diameter: 350 mm  <br/>side roll diameter: 260 mm<br/>working speed: 1,5-5 m/min<br/>length: 5.500 mm<br/>width: 2.000 mm <br/>heigth: 1.900 mm  <br/>motor power: 22 kw<br/>weight: 13.000 kg<br/><br/><br/><br/> : 25 MM
: 20 MM
: 20 MM
: 16 MM
: 2.550 MM
: 350 MM
: 350 MM
: 260 MM
: 5.500 MM
: 2.000 MM
: 1.900 MM
: 22 KW
: 13.000 KG
STANDARD EQUIPMENT

FULLY HYDRAULIC DRIVE OF UPPER- AND SIDE ROLLS
HYDRAULIC INFEED OF LOWER- AND SIDE ROLLS
DIGITAL READ-OUT OF LOWER AND SIDE ROLLS POSITION
CONICAL BENDING DEVICE
HYDRAULIC LOAD RELIEVING OF UPPER ROLL
HYDRAULIC DROP-END BEARING 
HARDENED ROLLS
2 WORKING SPEEDS
CENTRAL LUBRICATION SYSTEM
PROTECTION AGAINST OVERLOAD
MOVEABLE CONTROL PANE
USER MANUAL IN GERMAN AND ENGLISH 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

OPTIONAL EQUIPMENT

GROUND AND POLISHED ROLLS
INFINITELY ADUSTABLE SPEED OF ROLLS
HYDRAULIC/MECHANIC ADJUSTABLE UPPER AND LATERAL SUPPORTS
AUT. MATERIAL WITHDRAWAL
CHANGEABLE UPPER ROLL FOR ESPECIALLY NARROW BENDING RADII

IMPORTANT ISSUES AT CONICAL BENDING:

THE MAX. SHEET METAL THICKNESS IS EQUIVALENT TO 50 % OF NOMINAL CAPACITY 
THE CONE LENGTH CAN BE MAX. 30 % ORE MUST BE MORE THAN 60 % OF ROLL LENGTH 
HARDENED ROLLS ARE RECOMMENDED

(SAMPLE PHOTO)

BENDING CAPACITY WITHOUT PRE-BENDING AT 5X UPPER TOOL DIAM.: 25 MM
BENDING CAPACITY WITH PRE-BENDING AT 5X UPPER TOOL DIAM.: 20 MM
BENDING CAPACITY WITHOUT PRE-BENDING AT 1,5X UPPER TOOL DIAM.: 20 MM
BENDING CAPACITY WITH PRE-BENDING AT 1,5X UPPER TOOL DIAM.: 16 MM
BENDING LENGTH: 2.550 MM
UPPER ROLL DIAMETER: 350 MM
LOWER ROLL DIAMETER: 350 MM
SIDE ROLL DIAMETER: 260 MM
WORKING SPEED: 1,5-5 M/MIN
LENGTH: 5.500 MM
WIDTH: 2.000 MM
HEIGTH: 1.900 MM
MOTOR POWER: 22 KW
WEIGHT: 13.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-: 30 to<br/>: 244 bar<br/>: 700 x 450 mm<br/>: 500 x 380 mm<br/>: 80 mm<br/>: 200 mm<br/>: 400 mm<br/>: 7,5 kw<br/>: 1.680 mm<br/>: 850 mm<br/>: 2.250 mm<br/>: 2.950 kg<br/>front light guard <br/>pressure adjustment<br/>2-hand operating<br/>t-slots in table and ram<br/>stroke adjustment<br/>2 ram round guidings<br/>according to ",ce", regulation<br/>(sample photo)<br/><br/>press force: 30 to<br/>hydraulic pressure: 244 bar<br/>table: 700 x 450 mm<br/>ram dimension: 500 x 380 mm<br/>hole in table: 80 mm<br/>stroke: 200 mm<br/>distance ram-table: 400 mm<br/>rapid speed: 54 mm/s<br/>working speed: 18 mm/s<br/>return speed: 90 mm/s<br/>motor: 7,5 kw<br/>length: 1.680 mm<br/>width: 850 mm<br/>heigth: 2.250 mm<br/>weight: 2.950 kg<br/><br/><br/><br/> : 30 TO
: 244 BAR
: 700 X 450 MM
: 500 X 380 MM
: 80 MM
: 200 MM
: 400 MM
: 7,5 KW
: 1.680 MM
: 850 MM
: 2.250 MM
: 2.950 KG
FRONT LIGHT GUARD
PRESSURE ADJUSTMENT
2-HAND OPERATING
T-SLOTS IN TABLE AND RAM
STROKE ADJUSTMENT
2 RAM ROUND GUIDINGS
ACCORDING TO ",CE", REGULATION
(SAMPLE PHOTO)

PRESS FORCE: 30 TO
HYDRAULIC PRESSURE: 244 BAR
TABLE: 700 X 450 MM
RAM DIMENSION: 500 X 380 MM
HOLE IN TABLE: 80 MM
STROKE: 200 MM
DISTANCE RAM-TABLE: 400 MM
RAPID SPEED: 54 MM/S
WORKING SPEED: 18 MM/S
RETURN SPEED: 90 MM/S
MOTOR: 7,5 KW
LENGTH: 1.680 MM
WIDTH: 850 MM
HEIGTH: 2.250 MM
WEIGHT: 2.950 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 46.200 €
Ubicación: Land-: 150 to<br/>: 254 bar<br/>: 1200 x 750 mm<br/>: 950 x 650 mm<br/>: 120 mm<br/>: 300 mm<br/>: 550 mm<br/>: 165 mm<br/>: 11 kw<br/>: 2.225 mm<br/>: 1.600 mm<br/>: 3.650 mm<br/>: 8.200 kg<br/>light curtain<br/>manual and automatic working <br/>manual stroke adjustment by camshaft switch<br/>maintenance free self lubricating 4-fold ram guiding<br/>polster plate with t-slots <br/>according to ",ce", rules<br/>(sample photo)<br/><br/>press force: 150 to<br/>hydraulic pressure: 254 bar<br/>table: 1200 x 750 mm<br/>ram dimension: 950 x 650 mm<br/>hole in table: 120 mm<br/>stroke: 300 mm<br/>distance ram-table: 550 mm<br/>rapid speed: 100 mm/s<br/>working speed: 5,5 mm/s<br/>return speed: 165 mm<br/>motor: 11 kw<br/>length: 2.225 mm<br/>width: 1.600 mm<br/>heigth: 3.650 mm<br/>weight: 8.200 kg<br/><br/><br/><br/> : 150 TO
: 254 BAR
: 1200 X 750 MM
: 950 X 650 MM
: 120 MM
: 300 MM
: 550 MM
: 165 MM
: 11 KW
: 2.225 MM
: 1.600 MM
: 3.650 MM
: 8.200 KG
LIGHT CURTAIN
MANUAL AND AUTOMATIC WORKING
MANUAL STROKE ADJUSTMENT BY CAMSHAFT SWITCH
MAINTENANCE FREE SELF LUBRICATING 4-FOLD RAM GUIDING
POLSTER PLATE WITH T-SLOTS
ACCORDING TO ",CE", RULES
(SAMPLE PHOTO)

PRESS FORCE: 150 TO
HYDRAULIC PRESSURE: 254 BAR
TABLE: 1200 X 750 MM
RAM DIMENSION: 950 X 650 MM
HOLE IN TABLE: 120 MM
STROKE: 300 MM
DISTANCE RAM-TABLE: 550 MM
RAPID SPEED: 100 MM/S
WORKING SPEED: 5,5 MM/S
RETURN SPEED: 165 MM
MOTOR: 11 KW
LENGTH: 2.225 MM
WIDTH: 1.600 MM
HEIGTH: 3.650 MM
WEIGHT: 8.200 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HESSE types: