41 ofertas

Año de construcción: 1999
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Center height: 1127mm, center distance: 2200mm, max. turning length: 2200mm, max. swing over bed/ sledge: 670/ 490mm, max. table load: 600kg, spindle diameter: 160mm, spindle bore: 115mm, max. torque: 1944Nm, quill cone: MK5, quill diameter: 125mm, controls: SIEMENS 840D, length: 8600mm, width: 2500mm, height: 2200mm, weight: 12t, including two bezels 20-165 and 50-310, lathe center in need of repair, tail stock is slightly deviating. more

Año de construcción: 2001
Ubicación: Germany
Vendedor: ProdEq Trading GmbH

WORKING RANGE -CUBIC-: - number of processing axes (excl parallel axes): 5 - X-axis travel: 7000 mm - Y-axis travel: 5100 mm - Z-axis travel: 1500 mm - rotating range A-axis from: 105 ° - rotating range A-axis up to: -95 ° - rotating range C-axis from: 0 ° - rotating range C-axis up to: 4320 ° - distance spindle nose - table surface (max.): 2160 mm PORTAL / BRIDGE: - distance between columns: 3220 mm TABLE: - table surface (left-right): 3000 mm - table surface (front-back): 6000 mm - workpiece load (max): 72000 kg MILLING SPINDLE / HEAD: - spindle type: orthogonal head: - - mode of operation: automatic: - - positioning/indexing: 360 ° - spindle revolutions (m ... more

Año de construcción: 1964
Ubicación: Land-DE Germany, 59846 Sundern
Vendedor: Czech Industrie Service

Tip height: 511 / 550 mm Centre distance: 4300 mm Spindle bore: 95 mm Speed range: 11.2-560 RPM Total power consumption: 10 / 15 KW / 380 V Machine weight: 6000 kg Accessories / equipment: automatic feed in the upper support 3 - jaw Chuck 500 mm Face plate 900 mm festst. Lynette 300 mm 4 way Toolpost mitlfd. Lathe Machine lamp All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Any serious prospective buyer has the opportunity to test the machine before making a purchase in our factory under power. more

Año de construcción: 1954
Ubicación: 46342 Velen
Vendedor: WMT GmbH & Co. KG

turning diameter over bed: 520 mm turning diameter over slide rest: 330 mm turning length: 1000 mm turning diameter in the gap: 800 mm spindle bore: 70 mm turning speed range: 22,4 - 1120 U/min taper in tailstock-quill: MK5 voltage: 380 V total power requirement: 5,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 5,2 x 1,2 x 1,2 m - Quick Change Tool Holder - 3-jaw chuck 315mm - Lynette 240mm - Rotating tailstock center - Emergency stop device more

Año de construcción: usado
Ubicación: Land-pt PT Marinha Grande
Vendedor: occasionmachines

AROUND HEYLIGENSTAEDT MECHANIC 2 m BETWEEN POINTS more

Año de construcción: 1963
Ubicación: 46342 Velen
Vendedor: WMT GmbH & Co. KG

swing diameter: 800 mm centre height: 400 mm turning diameter over slide: 340 mm turning dia. in gap: 1160 mm turning length: 4000 mm turning speed range: 4 - 710 U/min tailstock taper MT: 5 total power requirement: 11 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1,7 x 3,7 x 1,6 m Sliding bed lathe with: - Digital display - Multifix steel holder size C with 2 pcs. Cassettes - Faceplate 800mm - 2 pcs. Lynetten 240mm and 470mm - Coolant system more

Año de construcción: 1961
Ubicación: NRW
Vendedor: AS Maschinenhandel

1 used heavy lathe Manufacturer: HEYLIGENSTAEDT Type: 63 en Year of construction: 1961 Turning diameter max: 1250 mm Turning length: 10000 mm with 2 heads and drilling tailstock more

Año de construcción: usado
Ubicación: 46342 Velen
Vendedor: WMT GmbH & Co. KG

swing diameter: 800 mm centre height: 400 mm turning diameter over slide: 340 mm turning dia. in gap: 1400 mm turning length: 1500 mm turning speed range: 4 - 710 U/min tailstock taper MT: 5 total power requirement: 11 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,5 x 1,7 x 1,7 m Sliding bed lathe - geometrically revised in 1998. - Digital display is missing, but 3 length measuring systems installed - Forkardt 3-jaw chuck 315mm - Coolant device more

Año de construcción: 1961
Ubicación: Land-De Germany, 41334 Nettetal
Vendedor: CBW Böhmer Werkzeugmaschinen

1 used heavy lathe manufacturer: HEYLIGENSTAEDT type: 63 en BJ. 1961 Turning diameter max: 1250 mm Turning length: 10000 mm Machine is in very good condition with 2 heads and drilling tailstock Steady rests Total weight. 40000kg more

Año de construcción: 2005
Ubicación: Werksstandort, unter Strom
Vendedor: STEINHAND GmbH

x-travel: 4000 mm y-travel: 2000 mm z-travel: 1000 mm w-axis: 2000 mm b-axis: 360 ° Control: SIMUMERIK 840D spindle distance: 2000 mm The mahcine is in a very well maintained condition and can be viewed under power at any time! more

Año de construcción: usado
Ubicación: Land-DE Germany, 61352 Bad Homburg
Vendedor: tuerer machinery brokers & consulting

REF.-No. 00497 description of conditioning of NC - lathe manufacturer Heyligenstaedt model Heynumat 5 UK / 800 year 1997 control Siemens 840C turning length 800 mm tailstock Quill diameter 100mmPinolenhub 140mmZMD riding haltingly setting 1111mmZ1FD93mmMaschinengröÃ?en = TWS rechtsMax. Swing over bed (before the TWS discs) 640mmMax. Swing over bed slide 450mmMax. Turning diameter 330 mm maximum circuit of the tools under StromVerkaufsgrund 640 mmMit Chuck JAWS is 1 new ErsatzfensterscheibeZustandAnlage new machine purchase due date system must get out now, because the space is needed more

Año de construcción: 1998
Ubicación: Tönisvorst
Vendedor: SK Maschinen-Service GmbH

turning diameter: 770 mm turning length: 1000 mm control: SIEMENS Sinumerik 840 C greates pass round over bed: 920 mm swing diameter over bed slide: 675 mm spindle diameter in front bearing: 200 mm spindle bore: 125 mm spindle head: DIN 55021 Gr. 15 turning speeds - automatic switchable: 5-1800 U/min worktool system: TWS rechts tool taper: DIN 69880 total power requirement: 60 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 6x3x3 m chip conveyor: - machine was completely overhauled in 1998 by Messrs. Heyligenstaedt and equipped with a SIEMENS Sinumerik 840C for 2 axis + main spindel - chip conveyor with wet turning! - C-axis indexing 2,5 ° - driven tools, 1250 U/min,  ... more

Año de construcción: 1964
Ubicación: Carl-Zeiss-Str. 8-10, 63165 Muehlheim/Main, DE
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH

Tip height: 511/550 mm, Centre distance: 4300 mm, Spindle bore: 95 mm, Spindle speed: 11.2-560 U/min. Drive: 10.0 / 15.0 kW. Weight: 6000 kg more

Año de construcción: 1997
Ubicación: Land-CH Switzerland, 9527 Niederhelfenschwil
Vendedor: ProdEq Trading GmbH

turning diameter: mm turning length: mm control: --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 1 - number of turrets: 1 - live positions: yes: WORKING RANGE TURNING: - swing diameter (max): 670 mm - turning diameter (max): 340 mm - worpiece length max.: 800 mm MAIN SPINDLE: - spindle revolutions (min): 25 /min - spindle revolutions (max): 5000 /min - drive power S6 40%: 50 kW - drive power S6 40%: 37 kW - spindle torque S6 40%: 372 Nm - spindle torque S1 100%: 276 Nm - spindle diameter: 120 mm - spindle bore diameter: 83 mm X/Z SLIDE: - Z-axis travel: 878 mm - X-axis travel: 270 mm - rapid traverse Z: 15000 mm/min  ... more

Año de construcción: 1968
Precio: 4.500 €
Ubicación: Niedersachsen
Vendedor: WTS Maschinenhandels KG

maximum turning diameter D 600 x 150 mm long Alternatively D 375 x 1000 mm long, hydraulic copying device tailstock, rapid traverse for x and z axis, 4 x tool holders, coolant system more

Año de construcción: usado
Ubicación: 0
Vendedor: Markus Hirsch GmbH

turning diameter over bed: 2000 mm turning diameter over slide rest: 1500 mm turning length: 10000 mm speed: 1,4 - 71 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 1961
Ubicación: Land-DE Germany, 51149 Köln
Vendedor: AS Maschinenhandel

1 used heavy lathe manufacturer: HEYLIGENSTAEDT Type: 63 en BJ. 1961 Turning diameter max: 1250 mm Turning length: 10000 mm with 2 heads and drilling tailstock more

Año de construcción: 1960
Ubicación: Willich
Vendedor: Markus Hirsch GmbH

turning diameter over bed: 1050 mm turning diameter over slide rest: 730 mm turning length: 4300 mm bed width: 670 mm turning speeds: 3,75-800 U/min Rapid travel: spindle passage: 110 mm turning diameter in the gap: 1115 mm length of gap: 600 mm powered upper support: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 1958
Ubicación: 01587-Riesa
Vendedor: Brand GmbH

Heyligenstaedt 650ES - L + Z plan lathe head lathe L-1250 used Ã?-1300 mm. Manufacturer: Heyligenstaedt Type: 650ES / 650-ES BJ.: 1958 maximum turning length 1250 mm maximum turning diameter 1300 mm Tip height: 650 mm 4-jaw hub Ã? 1200 mm Rotating JAWS individually adjustable with removable bed approx. 400 mm Turns: 5, 7, 10, 14, 20, 28, 40, 56, 79, 112, 160, 224 RPM with guidance and spindle Motor Perske DN2312/4 380 V, 15 kW; 1450 RPM. ! Electrical equipment needs to be replaced! Total approx. 3700 x 1900 H 1750 mm Sightseeing in our warehouse in Riesa possible. Changes and errors in the technical data, information and prices and subject to prior sale ... more

Año de construcción: 1961
Ubicación: Willich
Vendedor: Markus Hirsch GmbH

turning diameter over bed: 1200 mm turning diameter over slide rest: 860 mm turning length: 9300 mm turning diameter in the gap: 1300 mm length of gap: 650 mm faceplate: 1000 mm Spindle diameter: 105 mm turning speeds: 1,7-355 U/min Rest: 2 Rapid travel: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 2005
Ubicación: Land-de DE
Vendedor: Innovac GmbH

X-travel: 4000mm, y-travel: 2000mm, z-travel: 1000mm, W-travel: 2000mm, tool mount: DIN 69871-AD50, rapid traverse: 40m/min, feed force: 20000N, rotational speed: 4000-5000/min, torque: 1850Nm, spindle power: 42kW, angle head power: 34kW, angle head rotational speed: 2500/min, angle head torque: 1500Nm, table dimensions 1/2: 1500x2000/ 1000x1500mm, table load 1/ 2: 10t, magazine and loading module slots: 192 plus 18, max. tool length: 850mm, tool diameter: 125-250mm, tool weight: 100kg, control: Simatic S7, including switch module, milling slide and pallet changer. more

Año de construcción: 1969
Ubicación: Deutschland
Vendedor: Markus Hirsch GmbH

longitudinal travel: 2600 mm vertical movement: 700 mm cross travel: 1400 mm table-size: 3000 x 1600 mm spindle drive: 15 kW speeds: 40 - 2000 U/min feeds: 5 - 1000 mm/min rapid traverse: 3750 mm/min voltage: 380 V total power requirement: 50 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 7,3 x 4,63 x 4,28 m Spindle: 125 mm Control: Heidenhain Atek Machine was reconditioned and retrofitted with FIDIA CNC F1 UNO 234 in 1999. We supply a multiple spindle adapter head and a complete vertical milling unit along with that machine. more

Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-es ES San Sebastian
Vendedor: Maquinaria Industrial Donosti Sl

Distance between centers: 5500mm. Swing: 720mm. Swing over carriage: 480mm. Swing over gap: 1020mm. Spindle: 85mm. Motor power: 15kw. Equipped with chuck. Equipped with steady rest. Dimensions: 7200x1500x1400mm Weight: 6000Kgs. more

Año de construcción: usado
Ubicación: Willich
Vendedor: Markus Hirsch GmbH

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: total power requirement: kW weight of the machine ca.: t more

Año de construcción: 1996
Precio: 9.800 €
Ubicación: Land-de DE
Vendedor: Czech Industrie Service

Year of construction: 1996 Max Drehdurchm. over bed slide: 420 mm Max Drehdurchm. bed: 500 mm Max Umlaufdurchm. bed: 640 mm maximum turning length: 500 mm Speed range: 9-2240 UpM Total power: 75 KW / 380 Volt Machine weight: 8500 kg Accessories / equipment: CNC control Siemens Sinumerik 820 T 12 x turret - Schaftdurchm.: 50 mm 3 bake 400 mm power operated chucks various inserts for tool turret various recordings Coolant system All technical specifications have been created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine before making a purchase in our plant in Hesse under power. more

Año de construcción: 1995
Ubicación: Deutschland
Vendedor: Markus Hirsch GmbH

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m more

Año de construcción: 1958
Ubicación: Land-de DE Wiesbaden
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe more

Año de construcción: 1995
Ubicación: Nürnberg
Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

greates pass round over bed: 890 mm turning length: 3958 mm control: SIN840C longitudinal stroke: 3.958 mm face stroke: 525 y-axis: +/- 140 mm feed X/Z-axis: 0,5 - 5.000 mm/min rapid traverse x + z axis: 15,00 m/min power feed longitudinal: 22.000 N power feed plane: 10.000 N greates pass round over bed: 890 mm swing diameter over slide rest: 810 mm turning speed range: 5 - 1.800 U/min spindle drive: 50 / 69 kW spindle bore: 122 mm spindle diameter in front bearing: 200 mm spindle head: DIN55026-A15 Driven tool turning speed: 0 - 3.850 1/min. drive motor for milling spindle: 22,00 kW number of tools: 36 tool taper: CAPTO C8 tool diameter: 160 mm tool length - max.: 450 mm weight of tools max ... more

Año de construcción: usado
Precio: 27.500 GBP
Ubicación: Land-uk UK
Vendedor: GM Machinery Limited

Serial No. 581001807 Centre height 500 mm Swing over bed 1,000 mm Swing over cross slide 762 mm Distance between centres 8,000 mm Spindle speeds 2.35 ? 500 rpm Spindle bore 101 mm Equipment 1000mm dia 4 jaw chuck Quick change toolpost with toolholders 2 x 500mm capacity fixed steadies 1 x 700mm capacity fixed steady Additional saddle Coolant more

Año de construcción: 1994
Ubicación: Standort
Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

turning diameter: 500 mm turning length: 2200 mm control: SIN880T swing over bed: 670 mm swing diameter over bed slide: 490 mm cross movement. (x-axis): 350 mm longitudinal traverse (z-axis): 2.318 mm feed X/Z-axis: 0,50 - 5.000 mm/min rapid traverse: 15,00 m/min spindle turning speed range: 2 - 3.550 U/min spindle drive: 37,00 / 53,00 kW spindle diameter in front bearing: 160 mm spindle bore: 115 mm chucking diameter: max. 500 mm Spindle head DIN55026 - Size: 11 tailstock quill taper MT: 5 diameter of quill: 125 mm quill stroke: 140 mm tool turret with 12 positions: tool holder: DIN 69880 Shank diameter: 50 mm steady for max. workpiece diameter from: 260 mm total power requirement: 60,00 k ... more

Año de construcción: usado
Ubicación: Land-ch CH Baden
Vendedor: DREYER-EXPORT

Centre lathe conventionally manufacturer: HEYLIGNESTAEDT Germany machine type: 400 Ea / 30 / 5500 top height: 405 mms top width: 5,500 mms incl. various accessories wide giving on inquiry more

Año de construcción: 1998
Ubicación: Deutschland
Vendedor: Knops Werkzeugmaschinen

turning diameter: 340 mm turning length: 800 mm control: Heidenhain Pilot 3190 Turn Plus total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The machine was 2018 geometrically and mechanically reconditioned and is available immediately. A set of standard turning tool holders is included. TECHNICAL SPECIFICATIONS Working range: Machine nominal length (NL) 800 Distance of turning spindle flange-tailstock center mm 987 Swing diameter over bed slide / bed mm 460/670 Turning diameter above bed carriage mm 340 Work spindle (Variant I, direct drive): Diameter in front bearing mm 120 Bore through mm 83 Spindle head DIN 55026 Form A size 8 Total speed range 1 /  ... more

Año de construcción: 1990
Ubicación: Metzingen
Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

turning diameter: 900 mm turning length: 5000 mm control: SIEMENS Sinumerik 3 T total power requirement: 85 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m more

Año de construcción: 1972
Ubicación: D - 77815 Bühl
Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH

turning diameter over bed: 880 mm turning diameter over slide rest: 660 mm turning length: 5000 mm centre height: 440 mm spindle bore: 95 mm spindle turning speed range: 9 - 450 U/min spindle nose: DIN 55022 Gr. 11 bed width: 630 mm max. workpiece weight between centres: 3550 kg workpiece weight flying up to 250 mm max.: 1600 kg upper slide travel: 330 mm spindle drive: 22 kW total power requirement: 28 kW weight of the machine ca.: 9,7 t dimensions: 7,8 x 1,5 x 1,82 m - with rapid feed in carriage - Accessories: 3-jaw chuck 500 mmø, MULTIFIX-tool post, DRO on 2 axis ACU-RITE, solid steady, running centre more

Año de construcción: 1973
Ubicación: D - 77815 Bühl
Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH

turning diameter over bed: 1100 mm turning diameter over slide rest: 820 mm turning length: 7500 mm workpiece length - max.: 9000 mm centre height: 560 mm spindle bore: 100 mm workpiece weight: max. 10.000 kg turning speed range: 5 - 1000 U/min feeds - longitudinal: 0,5 - 400 mm/min feeds - cross: 0,5 - 400 mm/min creep feed: 4 mm/min rapid travel - longitudinal/face: 3,5 / 1,4 m/min tailstock quill diameter: 200 mm tailstock quill adjustment: motorisch 375 mm tailstock taper MT: 6 bed width: 850 mm bed height over floor: 650 mm total power requirement: 48,5 kW weight of the machine ca.: 20 t dimensions of machine: 11,46 x 1,9 x 2,5 m - with rapid feed in carriage - Accessories: 4- jaw chuc ... more

Año de construcción: 1963
Ubicación: Land-de DE Germany, 46342 Velen-Ramsdorf
Vendedor: Surplex GmbH

Weight approx.: 7000 kg Dimensions (l x w x h) approx.: 6200 x 1600 x 1700 mm Description: Sliding bed lathe with: - Digital display - Multifix steel holder size C with 2 pcs. Cassettes - Faceplate 800mm - 2 pcs. Lynetten 240mm and 470mm - Coolant system Circulation diameter 800 mm Center height 400 mm Turning diameter over support 340 mm Turning diameter in the crank 1160 mm Turning length 4000 mm Speed range 4 - 710 rpm Tailstock mount MK 5 Total power requirement 11 kW Machine weight approx. 7.0 t Dimensions approx. 6.2 x 1.6 x 1.7 m more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Turning diameter: 930 mm Turning length: 5000 mm Turret positions: 12 CNC Brand: NUM CNC Model: 1060 Make Heyligenstaedt Type Heynumat 3U x 5000 Year 1976 / 1989 NUM 1060 Centre height (mm) Swing = 930 Center distance (mm) DBC = 5000 Spindle bore Bore = 125 Slamt bed machine12 Position Vdi turretchip conveyor full length more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Center height: 0 mm Center distance: 2000 mm Spindle bore: 0 mm Make Heyligenstaedt Type 900 ESa Year 60 er Heyligenstaedt Facing lathe Centre height (mm)Swing bed = 1.780 4 chuck = 1.500 Spindle boreTurn length = 2.000 Turning speed = 180 Rpm Main power = 25 kW more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Turning diameter: 1120 mm Turning length: 6000 mm Turret positions: 0 CNC Brand: NUM CNC Model: 760 MACH-id   3414 MAKE   Heyligenstaedt TYPE   ND 560 YEAR   1968 SPECIFICATIONS Swing over bed Ø  1.120 mm Control   NUM 760 Swing in the gap Ø  760 mm Distance between centres   6.000 mm Work piece weight   16.000 kg Spindle speeds / ranges   900 Rpm Heyligenstaedt cnc lathe more

Año de construcción: 1996
Ubicación: D - Hessen
Vendedor:

; good more

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)