79 ofertas

Año de construcción: usado
Precio: 11.900 €
Ubicación: Land-mandrel bending machine pipe bender bender

-max pipe diameter 90 x 4 mm
-aufgebaute tools ã? 35/49/62 mm
-div dorne selector switch for 8 bending angle
-rohraufschiebelã¤nge 5000 mm overall power consumption approx. 15 kw space requirement approx. 7,0 x 2.8 x 1.6 m
machine weight approx. 8.5 t MANDREL BENDING MACHINE PIPE BENDER BENDER -MAX PIPE DIAMETER 90 X 4 MM -AUFGEBAUTE TOOLS � 35/49/62 MM -DIV DORNE SELECTOR SWITCH FOR 8 BENDING ANGLE -ROHRAUFSCHIEBELäNGE 5000 MM OVERALL POWER CONSUMPTION APPROX. 15 KW SPACE REQUIREMENT APPROX. 7,0 X 2.8 X 1.6 M MACHINE WEIGHT APPROX. 8.5 T
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Ubicación: Land-diameter: 4mm, shaft length: 20mm, wire section: 35mm, performance: 430pieces/min.  DIAMETER: 4MM, SHAFT LENGTH: 20MM, WIRE SECTION: 35MM, PERFORMANCE: 430PIECES/MIN.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-capacity: 120 - 140  hl/h<br />pressure: 7,5  bar    <br />power consumption: 12,45 kw<br />basic construction: mounted on rack<br />equipment: 3 vessels (degassing, carbonisation, mixing), pump, bran & lübbe, nc 32,  impregnating pump (hilge), vacuum pump, remark: 2 components (base material, water/ co2)<br /> CAPACITY: 120 - 140 HL/H
PRESSURE: 7,5 BAR
POWER CONSUMPTION: 12,45 KW
BASIC CONSTRUCTION: MOUNTED ON RACK
EQUIPMENT: 3 VESSELS (DEGASSING, CARBONISATION, MIXING), PUMP, BRAN & LüBBE, NC 32, IMPREGNATING PUMP (HILGE), VACUUM PUMP, REMARK: 2 COMPONENTS (BASE MATERIAL, WATER/ CO2)
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: 250 €
Ubicación: Land-centrifugal pump - used
manufacturer: hilge
type: hygiana 1/2 block. 1.5 kw

dimensions:
length: 45cm, height 26cm, width 25cm

warning: the current list price of a new pump is € 4.379.
retail price € 250. vat  CENTRIFUGAL PUMP - USED MANUFACTURER: HILGE TYPE: HYGIANA 1/2 BLOCK. 1.5 KW DIMENSIONS: LENGTH: 45CM, HEIGHT 26CM, WIDTH 25CM WARNING: THE CURRENT LIST PRICE OF A NEW PUMP IS € 4.379. RETAIL PRICE € 250. VAT
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-heat exchange surface approx.: 40  m²<br />thermal capacity approx.: 1700  kw    <br />equipment: hot water circulation pump (hilge, capacity: 48 m³/h, discharge head 20 m water column), pneumatical control valve (samson), vapour shut-off valve (ebro), condensate serperator, (gestra), vapour outlet vent (awh, length: approx. 6 m)insulation: 50 mm mineral fibre mats, quilted on one side on stainless steel plaiting<br /> HEAT EXCHANGE SURFACE APPROX.: 40 M²
THERMAL CAPACITY APPROX.: 1700 KW
EQUIPMENT: HOT WATER CIRCULATION PUMP (HILGE, CAPACITY: 48 M³/H, DISCHARGE HEAD 20 M WATER COLUMN), PNEUMATICAL CONTROL VALVE (SAMSON), VAPOUR SHUT-OFF VALVE (EBRO), CONDENSATE SERPERATOR, (GESTRA), VAPOUR OUTLET VENT (AWH, LENGTH: APPROX. 6 M)INSULATION: 50 MM MINERAL FIBRE MATS, QUILTED ON ONE SIDE ON STAINLESS STEEL PLAITING
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: 4.600 €
Ubicación: Land-lifting capacity 2000 kg
weight            180 kg 

like new
    LIFTING CAPACITY 2000 KG WEIGHT 180 KG LIKE NEW
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-capacity: 400  hl/h<br />filter area: 34,4  m²<br />operating pressure: 6  bar<br />vessel volume: 2900  l<br />equipment: central discharge shaft designed as a driven axis for pvpp discharge by means of rotation, static element exhaust device for lossless recycling of the regenerated pvpp and for intensive cleaning, outlet manifold with leakage indicatorhydraulic cover lifting device, working platform with rising ladder, sludge pipe for pvpp recirculation, sight dn 150 with halogen lighting<br />accessories: feed pump (hilge, cn ii/60 c - 15 kw, 500 hl at 6 bar), hydraulic drive( 37 kw)<br /> CAPACITY: 400 HL/H
FILTER AREA: 34,4 M²
OPERATING PRESSURE: 6 BAR
VESSEL VOLUME: 2900 L
EQUIPMENT: CENTRAL DISCHARGE SHAFT DESIGNED AS A DRIVEN AXIS FOR PVPP DISCHARGE BY MEANS OF ROTATION, STATIC ELEMENT EXHAUST DEVICE FOR LOSSLESS RECYCLING OF THE REGENERATED PVPP AND FOR INTENSIVE CLEANING, OUTLET MANIFOLD WITH LEAKAGE INDICATORHYDRAULIC COVER LIFTING DEVICE, WORKING PLATFORM WITH RISING LADDER, SLUDGE PIPE FOR PVPP RECIRCULATION, SIGHT DN 150 WITH HALOGEN LIGHTING
ACCESSORIES: FEED PUMP (HILGE, CN II/60 C - 15 KW, 500 HL AT 6 BAR), HYDRAULIC DRIVE( 37 KW)
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land- "SCHOKO" MAKE KASPAR SCHULZ, FOR WORT COOKING, WITH EXPANSION EVAPORATOR / VACUUM TANK WITH FLOW-RATE OF 120 HL/H, 1 BAR, HILGE-WORT PUMP 5,5 KW, VACUUM PUMP 2,35 KW, WATER PUMP, FREQUENCY TRANSFORMER, VAPOUR CONDENSER / PLATE APPARATUS 776 KG/H FROM 70° TO 45° WITH MEASUREING UNITS, 12 AUTOMATIC VALVES, PIPING.
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-number of tanks: 4  pieces      <br />material:  stainless steel<br />equipment: 3 tanks á 82 hl horizontal (manufacturer: laudon), 1 tank of 15 hl standing (manufacturer: laudon), plate heat exchanger (manufacturer: alfa laval)grouped valves with 8 valves, 3 flow meter (manufacturer: endress & hauser, ( 2 of the next to heat exchanger)), 2 pumps (manufacturer: alfa laval), 6 pumps (manufacturer: hilge), 4 dosing pumps, 1 panel,<br /> NUMBER OF TANKS: 4 PIECES
MATERIAL: STAINLESS STEEL
EQUIPMENT: 3 TANKS á 82 HL HORIZONTAL (MANUFACTURER: LAUDON), 1 TANK OF 15 HL STANDING (MANUFACTURER: LAUDON), PLATE HEAT EXCHANGER (MANUFACTURER: ALFA LAVAL)GROUPED VALVES WITH 8 VALVES, 3 FLOW METER (MANUFACTURER: ENDRESS & HAUSER, ( 2 OF THE NEXT TO HEAT EXCHANGER)), 2 PUMPS (MANUFACTURER: ALFA LAVAL), 6 PUMPS (MANUFACTURER: HILGE), 4 DOSING PUMPS, 1 PANEL,
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-e 108 
 
1 cip plant, installed on a big frame
with 3 cip pressure ways, but without tanks
int. nr. b 15
with hilge centrifugal pumps
manufacturer year is 2003
with a small electronic cabinet
with 2 big and with 2 smaller pipe heater
made out of stainless steel, installed in the big frame
with a smal pipe connection plate
with 2 bigger hilge centrifugal pumps, outlet in nw 65
type: hilge euro-hydra-ii-block super
no. 23/02/134/607, 25 m³ against 35 m, 5,5 kw v2a 
measurement of the frame:
l x b x h: 4,10 m x 1,75 m x 2,50 m
bez. vo 1 hergestellt von pat						
please note:
if you want it, we can offer cip tanks in wanted size, 
coming outin the past  from another functions

price up standing point:      8.500,00 euro



   E 108 1 CIP PLANT, INSTALLED ON A BIG FRAME WITH 3 CIP PRESSURE WAYS, BUT WITHOUT TANKS INT. NR. B 15 WITH HILGE CENTRIFUGAL PUMPS MANUFACTURER YEAR IS 2003 WITH A SMALL ELECTRONIC CABINET WITH 2 BIG AND WITH 2 SMALLER PIPE HEATER MADE OUT OF STAINLESS STEEL, INSTALLED IN THE BIG FRAME WITH A SMAL PIPE CONNECTION PLATE WITH 2 BIGGER HILGE CENTRIFUGAL PUMPS, OUTLET IN NW 65 TYPE: HILGE EURO-HYDRA-II-BLOCK SUPER NO. 23/02/134/607, 25 M³ AGAINST 35 M, 5,5 KW V2A MEASUREMENT OF THE FRAME: L X B X H: 4,10 M X 1,75 M X 2,50 M BEZ. VO 1 HERGESTELLT VON PAT PLEASE NOTE: IF YOU WANT IT, WE CAN OFFER CIP TANKS IN WANTED SIZE, COMING OUTIN THE PAST FROM ANOTHER FUNCTIONS PRICE UP STANDING POINT: 8.500,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Ubicación: Land-capacity: 20000  l/h<br />co2 connection pressure: 8 -10  bar    <br />power consumption: 46 kva<br />operation / control:  control voltage 24 v dc<br />equipment: saturation tank (d=750 mm) with fill level detectors as a carbonisation tank, measuring writer (abb), circulatin pumpt (hilge), various ventilssaturation tank (d=750 mm) with fill level detectors as a carbonisation tank<br /> CAPACITY: 20000 L/H
CO2 CONNECTION PRESSURE: 8 -10 BAR
POWER CONSUMPTION: 46 KVA
OPERATION / CONTROL: CONTROL VOLTAGE 24 V DC
EQUIPMENT: SATURATION TANK (D=750 MM) WITH FILL LEVEL DETECTORS AS A CARBONISATION TANK, MEASURING WRITER (ABB), CIRCULATIN PUMPT (HILGE), VARIOUS VENTILSSATURATION TANK (D=750 MM) WITH FILL LEVEL DETECTORS AS A CARBONISATION TANK
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-hilge gmbh (groupe grundfos)
hygiana ii/4 bloc
25 m3/h
   HILGE GMBH (GROUPE GRUNDFOS) HYGIANA II/4 BLOC 25 M3/H
Vendedor: Daniel Diez Industrie Automatisierungs Service
Año de construcción: usado
Ubicación: Land-diameter range 2,6-8 mm<br>shaft length under head 6-50 mm<br>output pieces/min 260<br><h2><a href= DIAMETER RANGE 2,6-8 MM
SHAFT LENGTH UNDER HEAD 6-50 MM
OUTPUT PIECES/MIN 260

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-used, good condition from plant disassembly<br/>  <br/>  1 x hilger and kern / dopag pump 200 pump / pump / lubricant pump<br/>  <br/>  year of manufacture: 03<br/>  <br/>  for 200l drums Ø approx. 600 mm<br/>  <br/>  space lxwxh: 1000 x 700 x 1700 mm<br/>  weight: 300 kg price is plus vat free loaded bearing casting<br/>  <br/>  changes / errors in the specifications and subject to prior sale USED, GOOD CONDITION FROM PLANT DISASSEMBLY

1 X HILGER AND KERN / DOPAG PUMP 200 PUMP / PUMP / LUBRICANT PUMP

YEAR OF MANUFACTURE: 03

FOR 200L DRUMS Ø APPROX. 600 MM

SPACE LXWXH: 1000 X 700 X 1700 MM
WEIGHT: 300 KG PRICE IS PLUS VAT FREE LOADED BEARING CASTING

CHANGES / ERRORS IN THE SPECIFICATIONS AND SUBJECT TO PRIOR SALE
Vendedor: Weigel – Consulting
Año de construcción: usado
Precio: 520 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-centrifugal pump, hile
flow rate 2-8 cbm/h 
delivery height bei 15 m 
capacity, 0,75 kw 
speed 2.900 rpm 
inlet dn 40 
outlet dn 40 
va cover 
 CENTRIFUGAL PUMP, HILE FLOW RATE 2-8 CBM/H DELIVERY HEIGHT BEI 15 M CAPACITY, 0,75 KW SPEED 2.900 RPM INLET DN 40 OUTLET DN 40 VA COVER
Vendedor: GS-INDUSTRIESERVICE
Año de construcción: usado
Ubicación: Land-diameter range 1-4 mm<br>shaft length under head 20 mm<br>max. cutting length 36 mm<br>output- piece/min 460<br><h2><a href= DIAMETER RANGE 1-4 MM
SHAFT LENGTH UNDER HEAD 20 MM
MAX. CUTTING LENGTH 36 MM
OUTPUT- PIECE/MIN 460

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-sorting tracks
maximum thread diameter 8 mm
length under head 8-105 mm
maximum thread length 55 mm
the rolling jaws fixed size: 58 x 35 x 130 m
size of rolling cheeks moving: 58 x 35 x 150 mm
machine weight: 3200 kg
footprint: 1130 x 1110 mm
motor: 3,7 kw    SORTING TRACKS MAXIMUM THREAD DIAMETER 8 MM LENGTH UNDER HEAD 8-105 MM MAXIMUM THREAD LENGTH 55 MM THE ROLLING JAWS FIXED SIZE: 58 X 35 X 130 M SIZE OF ROLLING CHEEKS MOVING: 58 X 35 X 150 MM MACHINE WEIGHT: 3200 KG FOOTPRINT: 1130 X 1110 MM MOTOR: 3,7 KW
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-diameter range 2,6-8 mm<br>shaft length under head 6-80 mm<br>output - pieces/min 200<br><h2><a href= DIAMETER RANGE 2,6-8 MM
SHAFT LENGTH UNDER HEAD 6-80 MM
OUTPUT - PIECES/MIN 200

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-combifilter, make seitz orion, type: of 100-150, for ~120 hl/h, built 1983, in stainless steel, with 17 kieselguhr plates and 15 frames, divert chamber, 79 plates, kieselguhr discharge tub, kieselguhr dosage seitz audos with new s/s control cabinet, flow meter + writer make diessel, hilge beer feeding pump, multi tube heat exchanger. COMBIFILTER, MAKE SEITZ ORION, TYPE: OF 100-150, FOR ~120 HL/H, BUILT 1983, IN STAINLESS STEEL, WITH 17 KIESELGUHR PLATES AND 15 FRAMES, DIVERT CHAMBER, 79 PLATES, KIESELGUHR DISCHARGE TUB, KIESELGUHR DOSAGE SEITZ AUDOS WITH NEW S/S CONTROL CABINET, FLOW METER + WRITER MAKE DIESSEL, HILGE BEER FEEDING PUMP, MULTI TUBE HEAT EXCHANGER.
Vendedor: Hümmer GmbH
Año de construcción: usado
Precio: 2.950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pub brewery

consisting of 

mill 
2 roller mill,

2 vessels brew house
y.o.c.: 1991, capacity: 13,2 hl/sud
stainless steel (v4a), copper clad manually operated, electric heating (heating areas: 2 x
frame, 1 bottom), both vessels with temperature display
2 hilge pumps, type: durietta i-200-5/0,25/4, (q: 2-3 m³/h, h: 5,o m)

3 fermanting tanks
manufacturer: mhg, y.o.c.: 1991, capacity: 15 hl
flat conical, stainless steel, with sampling tap
one tank o fit converts to storage tank

5 storage tanks
manufacturer: mhg, y.o.c.: 1991, capacity: 13 hl
flat conical, stainless steel, with sampling tap

cooling plant
cooling plant with integrated tank and compressor
manufacturer: paul mueller company,
type: 1b*6, volume: 15 hl, capacity: 2,5 kw, voltage 380 v 3 ~ 50 hz, amperage: 12 a
refrigerant r404a, capacity: 7 kg, evaporation temperature: max. 10 °c, min. -10 °c
compressor: type: cm40-4cm/95108, manufacturer: maneurop, operating pressure: 3 bar
accessories: 2 pumps

hot water tank
stainless steel, standing on three feet, with hinged opening, heating areas: 1 bottom and 1 in the lower third of the frame PUB BREWERY CONSISTING OF MILL 2 ROLLER MILL, 2 VESSELS BREW HOUSE Y.O.C.: 1991, CAPACITY: 13,2 HL/SUD STAINLESS STEEL (V4A), COPPER CLAD MANUALLY OPERATED, ELECTRIC HEATING (HEATING AREAS: 2 X FRAME, 1 BOTTOM), BOTH VESSELS WITH TEMPERATURE DISPLAY 2 HILGE PUMPS, TYPE: DURIETTA I-200-5/0,25/4, (Q: 2-3 M³/H, H: 5,O M) 3 FERMANTING TANKS MANUFACTURER: MHG, Y.O.C.: 1991, CAPACITY: 15 HL FLAT CONICAL, STAINLESS STEEL, WITH SAMPLING TAP ONE TANK O FIT CONVERTS TO STORAGE TANK 5 STORAGE TANKS MANUFACTURER: MHG, Y.O.C.: 1991, CAPACITY: 13 HL FLAT CONICAL, STAINLESS STEEL, WITH SAMPLING TAP COOLING PLANT COOLING PLANT WITH INTEGRATED TANK AND COMPRESSOR MANUFACTURER: PAUL MUELLER COMPANY, TYPE: 1B*6, VOLUME: 15 HL, CAPACITY: 2,5 KW, VOLTAGE 380 V 3 ~ 50 HZ, AMPERAGE: 12 A REFRIGERANT R404A, CAPACITY: 7 KG, EVAPORATION TEMPERATURE: MAX. 10 °C, MIN. -10 °C COMPRESSOR: TYPE: CM40-4CM/95108, MANUFACTURER: MANEUROP, OPERATING PRESSURE: 3 BAR ACCESSORIES: 2 PUMPS HOT WATER TANK STAINLESS STEEL, STANDING ON THREE FEET, WITH HINGED OPENING, HEATING AREAS: 1 BOTTOM AND 1 IN THE LOWER THIRD OF THE FRAME
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-hilge durietta i-110-10/2,2 <br/>id5399 HILGE DURIETTA I-110-10/2,2
ID5399
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-we have over 100 known manufacturers such as hilge, tuchenhagen, ksb pumps, ahlborn etc in stock. all pumps are tested in our workshop of the function, density and performance. there are also some brand mono pumps netzsch in stock. here are some sample photos, we will send you the exact collection or photos on request. 

we reserve the right to make changes, misapprehensions and sale.
the price is the net, plus statutory vat (except for terms of payment: 100% prepayment or cash at pick up.)
terms of delivery: from site maxhuette free recharge truck dispatch through forwarding is possible at home and abroad, exact additional cost for this on request.  WE HAVE OVER 100 KNOWN MANUFACTURERS SUCH AS HILGE, TUCHENHAGEN, KSB PUMPS, AHLBORN ETC IN STOCK. ALL PUMPS ARE TESTED IN OUR WORKSHOP OF THE FUNCTION, DENSITY AND PERFORMANCE. THERE ARE ALSO SOME BRAND MONO PUMPS NETZSCH IN STOCK. HERE ARE SOME SAMPLE PHOTOS, WE WILL SEND YOU THE EXACT COLLECTION OR PHOTOS ON REQUEST. WE RESERVE THE RIGHT TO MAKE CHANGES, MISAPPREHENSIONS AND SALE. THE PRICE IS THE NET, PLUS STATUTORY VAT (EXCEPT FOR TERMS OF PAYMENT: 100% PREPAYMENT OR CASH AT PICK UP.) TERMS OF DELIVERY: FROM SITE MAXHUETTE FREE RECHARGE TRUCK DISPATCH THROUGH FORWARDING IS POSSIBLE AT HOME AND ABROAD, EXACT ADDITIONAL COST FOR THIS ON REQUEST.
Vendedor: Albin Halbritter GmbH
Año de construcción: usado
Ubicación: Land-hilge hygia s-i/20a <br/>id5398 HILGE HYGIA S-I/20A
ID5398
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-carbonisation / beer blending

manuf.: haffmanns, 
type: agm 06-549, 
capacity: 120 - 250 hl/h, 
y.o.c.:1996, 
mesuring range: from 0 up to 20° plato (ultra sonic mesurement)
flow rate: water min. 10 - max. 50 hl/h, beer undiluted min. 170 - max. 205
hl/h, beer diluted min. 120 - max. 250 hl/h

consisting of: 
carbonation pump 1,2kw/2800u/m/200-240v-9,5a-345-425v/5,5a, 
membran water degassing unit 
manf.: haffmans, type: hgs-057, capacity: 10-50 hl/h, y.o.c.: 2004, control: s7, chiller manuf.: 
thermowave, type: tl 90 facn, y.o.c.: 2004, 
hight pressure pump
manuf.: hilge, type: hygia ii/80/80/7.5, capacity: 250 hl/h at 4 bar

remark: 2004 upgraded to high gravity unit by manufacturer, plug-in construction with 2x 6 static mixer, co2- content from min. 3,0 up to max. 5,5 g/l CARBONISATION / BEER BLENDING MANUF.: HAFFMANNS, TYPE: AGM 06-549, CAPACITY: 120 - 250 HL/H, Y.O.C.:1996, MESURING RANGE: FROM 0 UP TO 20° PLATO (ULTRA SONIC MESUREMENT) FLOW RATE: WATER MIN. 10 - MAX. 50 HL/H, BEER UNDILUTED MIN. 170 - MAX. 205 HL/H, BEER DILUTED MIN. 120 - MAX. 250 HL/H CONSISTING OF: CARBONATION PUMP 1,2KW/2800U/M/200-240V-9,5A-345-425V/5,5A, MEMBRAN WATER DEGASSING UNIT MANF.: HAFFMANS, TYPE: HGS-057, CAPACITY: 10-50 HL/H, Y.O.C.: 2004, CONTROL: S7, CHILLER MANUF.: THERMOWAVE, TYPE: TL 90 FACN, Y.O.C.: 2004, HIGHT PRESSURE PUMP MANUF.: HILGE, TYPE: HYGIA II/80/80/7.5, CAPACITY: 250 HL/H AT 4 BAR REMARK: 2004 UPGRADED TO HIGH GRAVITY UNIT BY MANUFACTURER, PLUG-IN CONSTRUCTION WITH 2X 6 STATIC MIXER, CO2- CONTENT FROM MIN. 3,0 UP TO MAX. 5,5 G/L
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-diameter range 6 mm<br>shaft length under head 100 mm<br>max. cutting length 130 mm<br>output- piece/min 210<br><h2><a href= DIAMETER RANGE 6 MM
SHAFT LENGTH UNDER HEAD 100 MM
MAX. CUTTING LENGTH 130 MM
OUTPUT- PIECE/MIN 210

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-flash pasteurizer

manufacturer: alfa laval, 
type: clip 8-rh, 
capacity: 200 hl/h, 21 bar, 
y.o.c.: 1997

material: stainless steel, covered, 2 zones, incl. cool-down, control: s 5,
area: 182 m², heating: hot water, regenerative exchanger,
product in advance: from 2 ° c to 69 ° c, product in return: from 72 ° c to 5° c, heat recovery: 96%
heating section: beer from 69 ° c to 72 ° c, hot water (350 hl / h) from 74 °c to 70 ° c,
acessories: beer pump: hilge, type hygiana 2/4a, capacity: 200 hl/h, 11bar,motor 15 kw
pressure boosting pump: hilge: typ hygiana 1/40, 200 hl/h, 3,5 bar, motor
4 kw
magnetic inductive flowmeter, 2 resistance thermometers, 1 hygienic pressure transducer, 2 hygienic pressure transducers for pressure relief control, including control cabinet FLASH PASTEURIZER MANUFACTURER: ALFA LAVAL, TYPE: CLIP 8-RH, CAPACITY: 200 HL/H, 21 BAR, Y.O.C.: 1997 MATERIAL: STAINLESS STEEL, COVERED, 2 ZONES, INCL. COOL-DOWN, CONTROL: S 5, AREA: 182 M², HEATING: HOT WATER, REGENERATIVE EXCHANGER, PRODUCT IN ADVANCE: FROM 2 ° C TO 69 ° C, PRODUCT IN RETURN: FROM 72 ° C TO 5° C, HEAT RECOVERY: 96% HEATING SECTION: BEER FROM 69 ° C TO 72 ° C, HOT WATER (350 HL / H) FROM 74 °C TO 70 ° C, ACESSORIES: BEER PUMP: HILGE, TYPE HYGIANA 2/4A, CAPACITY: 200 HL/H, 11BAR,MOTOR 15 KW PRESSURE BOOSTING PUMP: HILGE: TYP HYGIANA 1/40, 200 HL/H, 3,5 BAR, MOTOR 4 KW MAGNETIC INDUCTIVE FLOWMETER, 2 RESISTANCE THERMOMETERS, 1 HYGIENIC PRESSURE TRANSDUCER, 2 HYGIENIC PRESSURE TRANSDUCERS FOR PRESSURE RELIEF CONTROL, INCLUDING CONTROL CABINET
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-tube diameter: 114 mm<br/>wall strength: 5 mm<br/>bending radius min.: 0 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TUBE DIAMETER: 114 MM
WALL STRENGTH: 5 MM
BENDING RADIUS MIN.: 0 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-centrifugal pump hilge euro-bloc-star
-pump no. 30b / v4.02
-capacity: 7000 l / h - 40m (4 bar)
   CENTRIFUGAL PUMP HILGE EURO-BLOC-STAR -PUMP NO. 30B / V4.02 -CAPACITY: 7000 L / H - 40M (4 BAR)
Vendedor: Mazuba GmbH
Año de construcción: usado
Ubicación: Land-diameter range 5-10 mm<br>shaft length under head 10-150 mm<br>max. cut-off length 180 mm<br>output pieces/min 100<br><h2><a href= DIAMETER RANGE 5-10 MM
SHAFT LENGTH UNDER HEAD 10-150 MM
MAX. CUT-OFF LENGTH 180 MM
OUTPUT PIECES/MIN 100

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-jet-cleaned tube filter (system: standard filterbau) with 176 tubes and 180 m² filtering surface. filter body is devided into 6 chambers each with 44 tube mounts; currently 4 chambers are fully equipped; an extension to 264 tubes / 270 m² filtering surface can easily be realised. 
tube dimensions: 140 mm Ø x 2.410 mm long; required compressed air: 9 - 14 m³/h at 6 bar. pressure tanks manufactured by jeuschede, valves by asco. 
filter body and dust collecting hopper are fully ensulated, the scope of supply contains: radial blower (45 kw / 1.475 rpm elin drive, 20200 m³/h air throughput and variable-inlet guide vane dn 560), dust extraction screw conveyor, silencer, chimney elements and spare parts (support cages, venturi nozzles and air nozzle pipes).
 
available for an additional charge: suitable cyclone for coarse particle separation in stainless steel make. JET-CLEANED TUBE FILTER (SYSTEM: STANDARD FILTERBAU) WITH 176 TUBES AND 180 M² FILTERING SURFACE. FILTER BODY IS DEVIDED INTO 6 CHAMBERS EACH WITH 44 TUBE MOUNTS; CURRENTLY 4 CHAMBERS ARE FULLY EQUIPPED; AN EXTENSION TO 264 TUBES / 270 M² FILTERING SURFACE CAN EASILY BE REALISED. TUBE DIMENSIONS: 140 MM Ø X 2.410 MM LONG; REQUIRED COMPRESSED AIR: 9 - 14 M³/H AT 6 BAR. PRESSURE TANKS MANUFACTURED BY JEUSCHEDE, VALVES BY ASCO. FILTER BODY AND DUST COLLECTING HOPPER ARE FULLY ENSULATED, THE SCOPE OF SUPPLY CONTAINS: RADIAL BLOWER (45 KW / 1.475 RPM ELIN DRIVE, 20200 M³/H AIR THROUGHPUT AND VARIABLE-INLET GUIDE VANE DN 560), DUST EXTRACTION SCREW CONVEYOR, SILENCER, CHIMNEY ELEMENTS AND SPARE PARTS (SUPPORT CAGES, VENTURI NOZZLES AND AIR NOZZLE PIPES). AVAILABLE FOR AN ADDITIONAL CHARGE: SUITABLE CYCLONE FOR COARSE PARTICLE SEPARATION IN STAINLESS STEEL MAKE.
Vendedor: Rau GmbH
Año de construcción: usado
Ubicación: Land-diameter range 1-4 mm<br>shaft length under head 20 mm<br>max. cut-off length 36 mm<br>output pieces/min 460<br><h2><a href= DIAMETER RANGE 1-4 MM
SHAFT LENGTH UNDER HEAD 20 MM
MAX. CUT-OFF LENGTH 36 MM
OUTPUT PIECES/MIN 460

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-pvpp-filter, make schenk, type: hk 6 str, with 6 segments, 5 bar, 340 lt. vessel content, built 1979, with dosage pump; regeneration tank assembled under pvpp-filter on frame, with pump; control cabinet; candle filter, make begerow; hilge-pump.  PVPP-FILTER, MAKE SCHENK, TYPE: HK 6 STR, WITH 6 SEGMENTS, 5 BAR, 340 LT. VESSEL CONTENT, BUILT 1979, WITH DOSAGE PUMP; REGENERATION TANK ASSEMBLED UNDER PVPP-FILTER ON FRAME, WITH PUMP; CONTROL CABINET; CANDLE FILTER, MAKE BEGEROW; HILGE-PUMP.
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-diameter range 2-6 mm<br>shaft length under head 5-50 mm<br>output pieces/min 180<br><h2><a href= DIAMETER RANGE 2-6 MM
SHAFT LENGTH UNDER HEAD 5-50 MM
OUTPUT PIECES/MIN 180

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-centrifugal horizontal filter

manufacturer: schenk
type: dilip/str-50
year of construction: 1998
capacity: 400 hl / h

remark:
used for beer stabilisation with pvpp, filtration area: 34.40 m²

accessories:
pump: type: hilge, cn ii/60 c - 15 kw  CENTRIFUGAL HORIZONTAL FILTER MANUFACTURER: SCHENK TYPE: DILIP/STR-50 YEAR OF CONSTRUCTION: 1998 CAPACITY: 400 HL / H REMARK: USED FOR BEER STABILISATION WITH PVPP, FILTRATION AREA: 34.40 M² ACCESSORIES: PUMP: TYPE: HILGE, CN II/60 C - 15 KW
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-diameter range 5-10 mm<br>shaft length under head 140 mm<br>max. cut-off length 160 mm<br>output pieces/min 115<br><h2><a href= DIAMETER RANGE 5-10 MM
SHAFT LENGTH UNDER HEAD 140 MM
MAX. CUT-OFF LENGTH 160 MM
OUTPUT PIECES/MIN 115

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-flow rate 25 m³ at 5 bar
capacity 11 kw
speed 2.900 rpm.
inlet dn 65 mm
outlet dn 65 mm
va cover
as good as new
 FLOW RATE 25 M³ AT 5 BAR CAPACITY 11 KW SPEED 2.900 RPM. INLET DN 65 MM OUTLET DN 65 MM VA COVER AS GOOD AS NEW
Vendedor: GS-INDUSTRIESERVICE
Año de construcción: usado
Ubicación: Land-diameter range 2,2-8 mm<br>shaft length under head 6-40 mm<br>output pieces/min 250<br><h2><a href= DIAMETER RANGE 2,2-8 MM
SHAFT LENGTH UNDER HEAD 6-40 MM
OUTPUT PIECES/MIN 250

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-flow rate 8 m³
delivery head 25 m
capacity 2,2 kw
speed 2.860 rpm.
inlet dn 30 mm
outlet dn 30 mm
va cover
mobile
 FLOW RATE 8 M³ DELIVERY HEAD 25 M CAPACITY 2,2 KW SPEED 2.860 RPM. INLET DN 30 MM OUTLET DN 30 MM VA COVER MOBILE
Vendedor: GS-INDUSTRIESERVICE
Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 6-12 mm<br>shaft length under head 12-130 mm<br>output pieces/min 150<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 6-12 MM
SHAFT LENGTH UNDER HEAD 12-130 MM
OUTPUT PIECES/MIN 150

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-end suction centrifugal pump
flow rate 50 cbm
delivery head 85 m
capacity 30 kw
speed 2900 rpm
inlet 100 mm
outlet 70 mm
seal water
 END SUCTION CENTRIFUGAL PUMP FLOW RATE 50 CBM DELIVERY HEAD 85 M CAPACITY 30 KW SPEED 2900 RPM INLET 100 MM OUTLET 70 MM SEAL WATER
Vendedor: GS-INDUSTRIESERVICE
Año de construcción: usado
Ubicación: Land-diameter range 1-4 mm<br>shaft length under head 25 mm<br>max. cutting length 39 mm<br>output- piece/min 460<br><h2><a href= DIAMETER RANGE 1-4 MM
SHAFT LENGTH UNDER HEAD 25 MM
MAX. CUTTING LENGTH 39 MM
OUTPUT- PIECE/MIN 460

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-stationary, self-priming centrifugal pump ex execution in bloc design on motor foot STATIONARY, SELF-PRIMING CENTRIFUGAL PUMP EX EXECUTION IN BLOC DESIGN ON MOTOR FOOT
Vendedor: unipo Gebäudemanagement GmbH
Año de construcción: usado
Ubicación: Land-diameter range 6-12 mm<br>shaft length under head 10-130 mm<br>output pieces/min 150<br><h2><a href= DIAMETER RANGE 6-12 MM
SHAFT LENGTH UNDER HEAD 10-130 MM
OUTPUT PIECES/MIN 150

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Ubicación: Land-centrifugal pump

manufacturer: hilge
type: hygia cn ii/60 d

multistage, normal-priming centrifugal pump designed according to criteria of hygiene and food technology. cip and sip capable in accordance with the performance criteria for pumps contained in din 12462.

the pump is used preferably in the brewery and beverage technology, processed milk farms, in food process engineering, in cip cleaning systems, in the pharmaceutical industry, medical technology, and process equipment of the cosmetics industry. further applications are in special systems in the chemicals and manufacturing industries, surface treatment, environmental technologies and in the textile industry.

pumps the design of cn have a bearing housing and are mounted on a base plate. the pump shaft to the motor shaft is connected by a flexible coupling.

hilge euro-hygia ® cn

stationary on base plate in process construction with bearing bracket
coupling and coupling guard
with free shaft end
with base plate CENTRIFUGAL PUMP MANUFACTURER: HILGE TYPE: HYGIA CN II/60 D MULTISTAGE, NORMAL-PRIMING CENTRIFUGAL PUMP DESIGNED ACCORDING TO CRITERIA OF HYGIENE AND FOOD TECHNOLOGY. CIP AND SIP CAPABLE IN ACCORDANCE WITH THE PERFORMANCE CRITERIA FOR PUMPS CONTAINED IN DIN 12462. THE PUMP IS USED PREFERABLY IN THE BREWERY AND BEVERAGE TECHNOLOGY, PROCESSED MILK FARMS, IN FOOD PROCESS ENGINEERING, IN CIP CLEANING SYSTEMS, IN THE PHARMACEUTICAL INDUSTRY, MEDICAL TECHNOLOGY, AND PROCESS EQUIPMENT OF THE COSMETICS INDUSTRY. FURTHER APPLICATIONS ARE IN SPECIAL SYSTEMS IN THE CHEMICALS AND MANUFACTURING INDUSTRIES, SURFACE TREATMENT, ENVIRONMENTAL TECHNOLOGIES AND IN THE TEXTILE INDUSTRY. PUMPS THE DESIGN OF CN HAVE A BEARING HOUSING AND ARE MOUNTED ON A BASE PLATE. THE PUMP SHAFT TO THE MOTOR SHAFT IS CONNECTED BY A FLEXIBLE COUPLING. HILGE EURO-HYGIA ® CN STATIONARY ON BASE PLATE IN PROCESS CONSTRUCTION WITH BEARING BRACKET COUPLING AND COUPLING GUARD WITH FREE SHAFT END WITH BASE PLATE
Vendedor: Tank und Apparate Barth GmbH
Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 6-12 mm<br>shaft length under head 12-130 mm<br>output pieces/min 150<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 6-12 MM
SHAFT LENGTH UNDER HEAD 12-130 MM
OUTPUT PIECES/MIN 150

Vendedor: Helmut Steinfels GmbH & Co. KG

Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-food centrifugal pump, dn 80/65, 11 kw, 400v, 2900 rpm.

price negotiable FOOD CENTRIFUGAL PUMP, DN 80/65, 11 KW, 400V, 2900 RPM. PRICE NEGOTIABLE
Vendedor: Romontec GmbH
Año de construcción: usado
Ubicación: Land-vibratory feeder<br>diameter range 5-10 mm<br>shaft length under head 200 mm<br>max. thread length 108 mm<br>output pieces/min 200<br><h2><a href= VIBRATORY FEEDER
DIAMETER RANGE 5-10 MM
SHAFT LENGTH UNDER HEAD 200 MM
MAX. THREAD LENGTH 108 MM
OUTPUT PIECES/MIN 200

Vendedor: Helmut Steinfels GmbH & Co. KG

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HILGE types: