31 ofertas

Año de construcción: usado
Precio: 20 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 125 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 125 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 95 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 35 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 750 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 160 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 220 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 35 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 65 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 65 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 65 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 520 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 65 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 70 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 160 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 70 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 20 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-sheet width: 3000 mm<br/>plate thickness: 10 mm<br/>distance between columns: 3240 mm<br/>column arm: 250 mm<br/>cutting angle: 2 °<br/>down holder: 14 <br/>cutting strokes max.: 13/19 p.min.<br/>table height: 850 mm<br/>quantity of oil: 230 l<br/>main drive: 22 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 10 t<br/>dimensions of the machine ca.: 4,35 x 3,1 x 2,2 m<br/>hydraulic plate shear -  hgm line<br/>---------------------------------------------------------------------------------------<br/>standard equipment:                                       <br/><br/>* electr. adjustment of back stop by ball screw spindles 1000 mm<br/>* tip-up of limit stop for long sheets<br/>* elgo positioning control for back stop <br/>* rapid cutting gap adjustment<br/>* cutting gap lighting <br/>* stepless cutting length adjustment<br/>* blade with 4 cutting edges<br/>* 1 side stop in front for right angular cuts, with measuring tape and tilt stop<br/>* 2 table extensions in front with measuring tape an tilt stop<br/>* ball bearing transport rolls in table surface<br/>* light barrier behind the machine<br/>* 2 cutting speeds<br/>* ce-marking (safety devices)<br/>* painting: light grey ral 7035 / sapphire blue ral 5003 <br/>* 12 month guarantee on single shift working<br/>* listing price of this machine: euro 34.900,-- + forwarding freight<br/><br/>options:<br/><br/>-  single axis-positioning control elgo 9521 with program memory and manual<br/>   operating for back stop and motorical cutting gap adjustment<br/>   eur  2.100,--<br/>-  cnc-control delem dac 360 with lcd display for back stop and<br/>   cutting gap adjustment, with programming funciton for stroke limit, axis position,           100 programm steps, postion correction, chain measurements, pull-back,<br/>   step repetation, product counter (cybelec dnc 61 g optional)<br/>   euro 3.400,--<br/>- pneumatic sheet holder<br/>  euro 2.900,--<br/>- tiltable finger protection<br/>  euro 1.000,--<br/>- angular stop 0° - 180° <br/>   eur 300,--<br/>- extended column arm 500 mm<br/>  euro 2.400,--<br/>- light barrier for finger protection instead of proteciton grid<br/>  euro 600,--<br/>* extension front support arms 1500/2000/3000 mm<br/>  eur  150,--/300,--/600,--<br/><br/>mvd machines are being manufactured since more than 30 years. equipt with components of well know mostly western european manufacturers like bosch, rexroth, hoerbiger, cybelec, delem, elgo , siemens, wila,<br/>telemechanique, fiessler, unimec etc.<br/><br/><br/><br/> SHEET WIDTH: 3000 MM
PLATE THICKNESS: 10 MM
DISTANCE BETWEEN COLUMNS: 3240 MM
COLUMN ARM: 250 MM
CUTTING ANGLE: 2 °
DOWN HOLDER: 14
CUTTING STROKES MAX.: 13/19 P.MIN.
TABLE HEIGHT: 850 MM
QUANTITY OF OIL: 230 L
MAIN DRIVE: 22 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 10 T
DIMENSIONS OF THE MACHINE CA.: 4,35 X 3,1 X 2,2 M
HYDRAULIC PLATE SHEAR - HGM LINE
---------------------------------------------------------------------------------------
STANDARD EQUIPMENT:

* ELECTR. ADJUSTMENT OF BACK STOP BY BALL SCREW SPINDLES 1000 MM
* TIP-UP OF LIMIT STOP FOR LONG SHEETS
* ELGO POSITIONING CONTROL FOR BACK STOP
* RAPID CUTTING GAP ADJUSTMENT
* CUTTING GAP LIGHTING
* STEPLESS CUTTING LENGTH ADJUSTMENT
* BLADE WITH 4 CUTTING EDGES
* 1 SIDE STOP IN FRONT FOR RIGHT ANGULAR CUTS, WITH MEASURING TAPE AND TILT STOP
* 2 TABLE EXTENSIONS IN FRONT WITH MEASURING TAPE AN TILT STOP
* BALL BEARING TRANSPORT ROLLS IN TABLE SURFACE
* LIGHT BARRIER BEHIND THE MACHINE
* 2 CUTTING SPEEDS
* CE-MARKING (SAFETY DEVICES)
* PAINTING: LIGHT GREY RAL 7035 / SAPPHIRE BLUE RAL 5003
* 12 MONTH GUARANTEE ON SINGLE SHIFT WORKING
* LISTING PRICE OF THIS MACHINE: EURO 34.900,-- + FORWARDING FREIGHT

OPTIONS:

- SINGLE AXIS-POSITIONING CONTROL ELGO 9521 WITH PROGRAM MEMORY AND MANUAL
OPERATING FOR BACK STOP AND MOTORICAL CUTTING GAP ADJUSTMENT
EUR 2.100,--
- CNC-CONTROL DELEM DAC 360 WITH LCD DISPLAY FOR BACK STOP AND
CUTTING GAP ADJUSTMENT, WITH PROGRAMMING FUNCITON FOR STROKE LIMIT, AXIS POSITION, 100 PROGRAMM STEPS, POSTION CORRECTION, CHAIN MEASUREMENTS, PULL-BACK,
STEP REPETATION, PRODUCT COUNTER (CYBELEC DNC 61 G OPTIONAL)
EURO 3.400,--
- PNEUMATIC SHEET HOLDER
EURO 2.900,--
- TILTABLE FINGER PROTECTION
EURO 1.000,--
- ANGULAR STOP 0° - 180°
EUR 300,--
- EXTENDED COLUMN ARM 500 MM
EURO 2.400,--
- LIGHT BARRIER FOR FINGER PROTECTION INSTEAD OF PROTECITON GRID
EURO 600,--
* EXTENSION FRONT SUPPORT ARMS 1500/2000/3000 MM
EUR 150,--/300,--/600,--

MVD MACHINES ARE BEING MANUFACTURED SINCE MORE THAN 30 YEARS. EQUIPT WITH COMPONENTS OF WELL KNOW MOSTLY WESTERN EUROPEAN MANUFACTURERS LIKE BOSCH, REXROTH, HOERBIGER, CYBELEC, DELEM, ELGO , SIEMENS, WILA,
TELEMECHANIQUE, FIESSLER, UNIMEC ETC.



Vendedor: EKW Werkzeugmaschinen AG & Co. KG
Año de construcción: usado
Ubicación: Land-sheet width: 3100 mm<br/>plate thickness: 6,0 mm<br/>distance between columns: 3150 mm<br/>thickness at niro-steel: 4,0 mm<br/>cutting angle: 1,2 °<br/>no. of strokes: 20 hub/min<br/>: 14 st.<br/>main drive: 15 kw<br/>back stop - adjustable: 1000 mm<br/>cutting gap adjustment: 0,05 - 0,8 mm<br/>quantity of oil: ~150 l<br/>total power requirement:  kw<br/>weight of the machine ca.: 5,65 t<br/>dimensions of the machine ca.: 3,9 x 2,4 x 1,64 m<br/>* cybelec cybtouch 6 program control with big, luminous and contrasty<br/>  full-touchscreen, easycut for single cuts, easy and clear display wit big keys  <br/>* back stop adjustment by ball screw spindles 1000 mm - controlled by<br/>  cybtouch<br/>* side stop in front with scale, t-slot tilt cams for right angular cuts<br/>  l cuts =1000 mm<br/>* 2 bearing arms in front 1000 mm<br/>* ball screws and side stop and bearing arms for easy moving of   sheets<br/>* quick cutting gap adjustment<br/>* cutting length limit<br/>* cutting line illumination<br/>* tiltable finger protection<br/>* movable foot switch<br/>* siemens electronic device<br/>* bosch/hoerbiger hydraulic system<br/>* safety light barrier at back side<br/>* ce-conformity declaration<br/>* 12 month guarantee<br/>* oil fill (if desired): 500 euro<br/>* locally instruction/ start-up (if desired): 850 euro<br/><br/><br/><br/> SHEET WIDTH: 3100 MM
PLATE THICKNESS: 6,0 MM
DISTANCE BETWEEN COLUMNS: 3150 MM
THICKNESS AT NIRO-STEEL: 4,0 MM
CUTTING ANGLE: 1,2 °
NO. OF STROKES: 20 HUB/MIN
: 14 ST.
MAIN DRIVE: 15 KW
BACK STOP - ADJUSTABLE: 1000 MM
CUTTING GAP ADJUSTMENT: 0,05 - 0,8 MM
QUANTITY OF OIL: ~150 L
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 5,65 T
DIMENSIONS OF THE MACHINE CA.: 3,9 X 2,4 X 1,64 M
* CYBELEC CYBTOUCH 6 PROGRAM CONTROL WITH BIG, LUMINOUS AND CONTRASTY
FULL-TOUCHSCREEN, EASYCUT FOR SINGLE CUTS, EASY AND CLEAR DISPLAY WIT BIG KEYS
* BACK STOP ADJUSTMENT BY BALL SCREW SPINDLES 1000 MM - CONTROLLED BY
CYBTOUCH
* SIDE STOP IN FRONT WITH SCALE, T-SLOT TILT CAMS FOR RIGHT ANGULAR CUTS
L CUTS =1000 MM
* 2 BEARING ARMS IN FRONT 1000 MM
* BALL SCREWS AND SIDE STOP AND BEARING ARMS FOR EASY MOVING OF SHEETS
* QUICK CUTTING GAP ADJUSTMENT
* CUTTING LENGTH LIMIT
* CUTTING LINE ILLUMINATION
* TILTABLE FINGER PROTECTION
* MOVABLE FOOT SWITCH
* SIEMENS ELECTRONIC DEVICE
* BOSCH/HOERBIGER HYDRAULIC SYSTEM
* SAFETY LIGHT BARRIER AT BACK SIDE
* CE-CONFORMITY DECLARATION
* 12 MONTH GUARANTEE
* OIL FILL (IF DESIRED): 500 EURO
* LOCALLY INSTRUCTION/ START-UP (IF DESIRED): 850 EURO



Vendedor: EKW Werkzeugmaschinen AG & Co. KG
Año de construcción: usado
Ubicación: Land-sheet width: 3100 mm<br/>plate thickness: 6 mm<br/>voltage: 380 v<br/>control: cybelec cybtouch 6 <br/>down holder: 14 stück<br/>cutting angle: 1,2 °<br/>total power requirement: 11 kw<br/>weight of the machine ca.: 5700 kg<br/>dimensions of the machine ca.: 4000x2100x1640 mm<br/>accessories / equipment:<br/>- cybelec cybtouch touch screen controller<br/>- nc controller for backgauge, gap adjustment, number of pieces,<br/>cutting length<br/>- 1 side stop with scale, t-groove and tilting cam<br/>- 2 front support arms<br/>- cut line lighting<br/>- cutting gap adjustment<br/>- cutting length limit<br/>- folding finger guard with limit switch<br/>- motorized back gauge 1.000 mm travel<br/>- ball screws<br/>- photocell behind the machine<br/>- ball rolls in the table<br/>- siemens electrical system<br/>- bosch / hoerbiger hydraulic system<br/>- footswitch<br/>- ce mark / declaration of conformity<br/>- operating manual: machine and control in german<br/><br/><br/><br/><br/> SHEET WIDTH: 3100 MM
PLATE THICKNESS: 6 MM
VOLTAGE: 380 V
CONTROL: CYBELEC CYBTOUCH 6
DOWN HOLDER: 14 STüCK
CUTTING ANGLE: 1,2 °
TOTAL POWER REQUIREMENT: 11 KW
WEIGHT OF THE MACHINE CA.: 5700 KG
DIMENSIONS OF THE MACHINE CA.: 4000X2100X1640 MM
ACCESSORIES / EQUIPMENT:
- CYBELEC CYBTOUCH TOUCH SCREEN CONTROLLER
- NC CONTROLLER FOR BACKGAUGE, GAP ADJUSTMENT, NUMBER OF PIECES,
CUTTING LENGTH
- 1 SIDE STOP WITH SCALE, T-GROOVE AND TILTING CAM
- 2 FRONT SUPPORT ARMS
- CUT LINE LIGHTING
- CUTTING GAP ADJUSTMENT
- CUTTING LENGTH LIMIT
- FOLDING FINGER GUARD WITH LIMIT SWITCH
- MOTORIZED BACK GAUGE 1.000 MM TRAVEL
- BALL SCREWS
- PHOTOCELL BEHIND THE MACHINE
- BALL ROLLS IN THE TABLE
- SIEMENS ELECTRICAL SYSTEM
- BOSCH / HOERBIGER HYDRAULIC SYSTEM
- FOOTSWITCH
- CE MARK / DECLARATION OF CONFORMITY
- OPERATING MANUAL: MACHINE AND CONTROL IN GERMAN




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 2100 mm<br/>plate thickness: 6 mm<br/>cutting angle: 1,2 °<br/>down holder: 12 <br/>no. of strokes: 28 hub/min<br/>control: cybelec cybtouch <br/>engine output: 15 kw<br/>back stop - adjustable: 1000 mm<br/>table height: 800 mm<br/>weight: 4500 kg<br/>dimensions: 3010x2100x1640 mm<br/>domestic equipments:<br/>- cybelec cybtouch touch screen controller<br/>- nc controller for backgauge,<br/>   cutting gap adjustment, number of pieces, chop length<br/>- automatic kerf adjustment<br/>- 1 side stop<br/>- 2 front support arms<br/>- cut line lighting<br/>- cutting length limit<br/>- folding finger guard with limit switch<br/>- motorized back gauge, travel = 1000 mm<br/>- ball rollers in the front support table<br/>- bosch / hoerbiger hydraulic system<br/>- siemens electrical system<br/>- photocell behind the machine<br/>- footswitch<br/>- ce mark / declaration of conformity<br/><br/><br/><br/><br/> SHEET WIDTH: 2100 MM
PLATE THICKNESS: 6 MM
CUTTING ANGLE: 1,2 °
DOWN HOLDER: 12
NO. OF STROKES: 28 HUB/MIN
CONTROL: CYBELEC CYBTOUCH
ENGINE OUTPUT: 15 KW
BACK STOP - ADJUSTABLE: 1000 MM
TABLE HEIGHT: 800 MM
WEIGHT: 4500 KG
DIMENSIONS: 3010X2100X1640 MM
DOMESTIC EQUIPMENTS:
- CYBELEC CYBTOUCH TOUCH SCREEN CONTROLLER
- NC CONTROLLER FOR BACKGAUGE,
   CUTTING GAP ADJUSTMENT, NUMBER OF PIECES, CHOP LENGTH
- AUTOMATIC KERF ADJUSTMENT
- 1 SIDE STOP
- 2 FRONT SUPPORT ARMS
- CUT LINE LIGHTING
- CUTTING LENGTH LIMIT
- FOLDING FINGER GUARD WITH LIMIT SWITCH
- MOTORIZED BACK GAUGE, TRAVEL = 1000 MM
- BALL ROLLERS IN THE FRONT SUPPORT TABLE
- BOSCH / HOERBIGER HYDRAULIC SYSTEM
- SIEMENS ELECTRICAL SYSTEM
- PHOTOCELL BEHIND THE MACHINE
- FOOTSWITCH
- CE MARK / DECLARATION OF CONFORMITY




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 3100 mm<br/>plate thickness: 13 mm<br/>thickness at niro-steel: 8 mm<br/>control: cybelec cybtouch <br/>down holder: 14 stück<br/>cutting angle: 2,0° °<br/>total power requirement: 22 kw<br/>no. of strokes: 11 hub/min<br/>voltage: 380 v<br/>weight of the machine ca.: 12.100 kg<br/>dimensions of the machine ca.: 4000x2240x2235 mm<br/>accessories / equipment:<br/>- cybelec-cybtouch control panel with digital display for backgauge<br/>- hydr. cutting gap adjustment via control<br/>- 1 side stop<br/>- 4 front lifting arms<br/>- cut line lighting<br/>- cutting gap adjustment<br/>- cutting length limit<br/>- ball rolls in the table<br/>- motorized back gauge 1.000 mm travel with recirculating ball screws,<br/>   automatically start at the end of the stop<br/>- shear knives for stainless steel cuts as standard<br/>- photocell behind the machine<br/>- siemens electrical system<br/>- bosch / hoerbiger hydraulic system<br/>- footswitch<br/>- operating instructions in german<br/><br/><br/><br/><br/> SHEET WIDTH: 3100 MM
PLATE THICKNESS: 13 MM
THICKNESS AT NIRO-STEEL: 8 MM
CONTROL: CYBELEC CYBTOUCH
DOWN HOLDER: 14 STüCK
CUTTING ANGLE: 2,0° °
TOTAL POWER REQUIREMENT: 22 KW
NO. OF STROKES: 11 HUB/MIN
VOLTAGE: 380 V
WEIGHT OF THE MACHINE CA.: 12.100 KG
DIMENSIONS OF THE MACHINE CA.: 4000X2240X2235 MM
ACCESSORIES / EQUIPMENT:
- CYBELEC-CYBTOUCH CONTROL PANEL WITH DIGITAL DISPLAY FOR BACKGAUGE
- HYDR. CUTTING GAP ADJUSTMENT VIA CONTROL
- 1 SIDE STOP
- 4 FRONT LIFTING ARMS
- CUT LINE LIGHTING
- CUTTING GAP ADJUSTMENT
- CUTTING LENGTH LIMIT
- BALL ROLLS IN THE TABLE
- MOTORIZED BACK GAUGE 1.000 MM TRAVEL WITH RECIRCULATING BALL SCREWS,
   AUTOMATICALLY START AT THE END OF THE STOP
- SHEAR KNIVES FOR STAINLESS STEEL CUTS AS STANDARD
- PHOTOCELL BEHIND THE MACHINE
- SIEMENS ELECTRICAL SYSTEM
- BOSCH / HOERBIGER HYDRAULIC SYSTEM
- FOOTSWITCH
- OPERATING INSTRUCTIONS IN GERMAN




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 3100 mm<br/>plate thickness: 13,0 mm<br/>thickness at niro-steel: 8,0 mm<br/>down holder: 14 stück<br/>no. of strokes: 11 - 20 hub/min<br/>oil volume: 310 ltr.<br/>cutting angle: 0,05 - 2,0 °<br/>throat: 350 mm<br/>table height: 900 mm<br/>total power requirement: 22,0 kw<br/>weight of the machine ca.: 13.300 kg<br/>range l-w-h: 5.110 x  2.570 x 2.400 mm<br/>linear guided sheet with scissors<br/>cutting angle and blade gap adjustment<br/>on cnc<br/>-------------------------------------------------- ----<br/>facilities:<br/>- cybelec - dnc 61 g control for cutting angle-<br/>   kerf and adjustable back stop and<br/>   select the cut length free ride, back gauge<br/>- back gauge controller 1000 mm travel<br/>   folded with ball screws, at the end<br/>- digital display f the backgauge<br/>- 2 support<br/>- 1 side stop with t-slot and tilting cam<br/>- cutting length adjustment<br/>- line lighting<br/>- stainless steel knife<br/>- ball rolls in the table<br/>- hinged finger guard with limit switch<br/>- footswitch<br/>- fissler light cabinet behind the machine<br/>- siemens electrical system<br/>- bosch / hoerbiger hydraulic system<br/>- ce-zeichen/konformitätserklärung<br/>- demand-manual: engine & control in german<br/><br/><br/><br/><br/> SHEET WIDTH: 3100 MM
PLATE THICKNESS: 13,0 MM
THICKNESS AT NIRO-STEEL: 8,0 MM
DOWN HOLDER: 14 STüCK
NO. OF STROKES: 11 - 20 HUB/MIN
OIL VOLUME: 310 LTR.
CUTTING ANGLE: 0,05 - 2,0 °
THROAT: 350 MM
TABLE HEIGHT: 900 MM
TOTAL POWER REQUIREMENT: 22,0 KW
WEIGHT OF THE MACHINE CA.: 13.300 KG
RANGE L-W-H: 5.110 X 2.570 X 2.400 MM
LINEAR GUIDED SHEET WITH SCISSORS
CUTTING ANGLE AND BLADE GAP ADJUSTMENT
ON CNC
-------------------------------------------------- ----
FACILITIES:
- CYBELEC - DNC 61 G CONTROL FOR CUTTING ANGLE-
KERF AND ADJUSTABLE BACK STOP AND
SELECT THE CUT LENGTH FREE RIDE, BACK GAUGE
- BACK GAUGE CONTROLLER 1000 MM TRAVEL
FOLDED WITH BALL SCREWS, AT THE END
- DIGITAL DISPLAY F THE BACKGAUGE
- 2 SUPPORT
- 1 SIDE STOP WITH T-SLOT AND TILTING CAM
- CUTTING LENGTH ADJUSTMENT
- LINE LIGHTING
- STAINLESS STEEL KNIFE
- BALL ROLLS IN THE TABLE
- HINGED FINGER GUARD WITH LIMIT SWITCH
- FOOTSWITCH
- FISSLER LIGHT CABINET BEHIND THE MACHINE
- SIEMENS ELECTRICAL SYSTEM
- BOSCH / HOERBIGER HYDRAULIC SYSTEM
- CE-ZEICHEN/KONFORMITäTSERKLäRUNG
- DEMAND-MANUAL: ENGINE & CONTROL IN GERMAN




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-pressure: 40 t<br/>chamfer lenght: 1270 mm<br/>distance between columns: 1050 mm<br/>column arm: 350 mm<br/>dayligth: 387 mm<br/>max. ram stroke: 170 mm<br/>feed down: 140 mm/sec<br/>feed up: 170 mm/sec<br/>pressing speed: 17 mm/sec<br/>main drive: 5,5 kw<br/>table height: 850 mm<br/>back stop - adjustable: 800 mm<br/>adjustment speed: 230 mm/min<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 3,22 to.<br/>dimensions of the machine ca.: 2,15 x 2,3 x 1,65 m<br/>* 2d graphic  cnc-control cybelec dnc 600 s (axis y1+y2, x)<br/>* back stop adjustment by ball screw spindles x-axis (cnc)<br/>* stop finger height adjustment r-axis (manuel)<br/>* stop finger longitudinal adjustment z-axis (manuel)<br/>* akas - laser-safety system manufacture fiessler<br/>* quick clamping of upper tools<br/>* upper tool - goats foot die (hardend) rolleri p 97 / 85° / r 0,8<br/>* universal die block with 4 v-openings 16/22/35/50 mm (hardend) rolleri m 460 r <br/>* sick light barrier behind the machine<br/>* movable double foot switch<br/>* protective cover for both cylinders<br/>* 2 in front and over the whole length easy movable bearing consols<br/>  with quick clamping - even adjustable in height<br/>* siemens - electro device<br/>* bosch/hoerbiger hydraulic device<br/>* ce-conformity declaration<br/>* 12 month guarantee<br/>* oil fill (if desired): euro 500,--<br/>* instruction/start-up locally (if desired) euro 850,--<br/><br/>machine inspectable under power at our showroom.<br/><br/><br/><br/> PRESSURE: 40 T
CHAMFER LENGHT: 1270 MM
DISTANCE BETWEEN COLUMNS: 1050 MM
COLUMN ARM: 350 MM
DAYLIGTH: 387 MM
MAX. RAM STROKE: 170 MM
FEED DOWN: 140 MM/SEC
FEED UP: 170 MM/SEC
PRESSING SPEED: 17 MM/SEC
MAIN DRIVE: 5,5 KW
TABLE HEIGHT: 850 MM
BACK STOP - ADJUSTABLE: 800 MM
ADJUSTMENT SPEED: 230 MM/MIN
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 3,22 TO.
DIMENSIONS OF THE MACHINE CA.: 2,15 X 2,3 X 1,65 M
* 2D GRAPHIC CNC-CONTROL CYBELEC DNC 600 S (AXIS Y1+Y2, X)
* BACK STOP ADJUSTMENT BY BALL SCREW SPINDLES X-AXIS (CNC)
* STOP FINGER HEIGHT ADJUSTMENT R-AXIS (MANUEL)
* STOP FINGER LONGITUDINAL ADJUSTMENT Z-AXIS (MANUEL)
* AKAS - LASER-SAFETY SYSTEM MANUFACTURE FIESSLER
* QUICK CLAMPING OF UPPER TOOLS
* UPPER TOOL - GOATS FOOT DIE (HARDEND) ROLLERI P 97 / 85° / R 0,8
* UNIVERSAL DIE BLOCK WITH 4 V-OPENINGS 16/22/35/50 MM (HARDEND) ROLLERI M 460 R
* SICK LIGHT BARRIER BEHIND THE MACHINE
* MOVABLE DOUBLE FOOT SWITCH
* PROTECTIVE COVER FOR BOTH CYLINDERS
* 2 IN FRONT AND OVER THE WHOLE LENGTH EASY MOVABLE BEARING CONSOLS
WITH QUICK CLAMPING - EVEN ADJUSTABLE IN HEIGHT
* SIEMENS - ELECTRO DEVICE
* BOSCH/HOERBIGER HYDRAULIC DEVICE
* CE-CONFORMITY DECLARATION
* 12 MONTH GUARANTEE
* OIL FILL (IF DESIRED): EURO 500,--
* INSTRUCTION/START-UP LOCALLY (IF DESIRED) EURO 850,--

MACHINE INSPECTABLE UNDER POWER AT OUR SHOWROOM.



Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-pressure: 2 x 220 t<br/>chamfer lenght: 2 x 4100 mm<br/>distance between columns: 2 x 3600 mm<br/>column arm: 410 mm<br/>ram stroke speed: 180 mm/sec<br/>return speed: 185 mm/sec<br/>work speed: 10,0 mm/sec<br/>work stroke: 275 mm<br/>dayligth: 550 mm<br/>oil volume: 2 x 300 ltr.<br/>table height: 900 mm<br/>table width: 160 mm<br/>back stop - adjustable: 800 mm<br/>total power requirement: 2 x 18,5 kw<br/>weight: 2 x 14.500 kg<br/>range l-w-h: 2 x 5150x2400x3000 mm<br/>tandem high-speed hydr. press brake with increased<br/>installation height and enlarged cylinder stroke<br/>-------------------------------------------------- ----------<br/>amenities:<br/>- cybelec - cnc control model modeva 12 s<br/>- controlled axes:<br/>   y1 - y2 - x - r and cnc crowning<br/>- back gauge with r-axis = 250 mm<br/>controlled motorized anti deflection by cnc -<br/>- rehfuss-top tool roleri ps 135-85 r08-<br/>- universalmatrizenblock 60x60 mm with<br/>   4vs in the die shoe<br/>- sick photoelectric sensor behind the machine<br/>- hoerbiger hydraulic system<br/>- siemens-electric plant<br/>- sick photoelectric sensor in front of the machine<br/>- 2 front support arms / sliding system<br/>- double foot switch<br/>- ce mark / declaration of conformity<br/>. - demand -stationary manual: engine & control in german<br/>- safety manual: press brake <br/><br/><br/><br/><br/> PRESSURE: 2 X 220 T
CHAMFER LENGHT: 2 X 4100 MM
DISTANCE BETWEEN COLUMNS: 2 X 3600 MM
COLUMN ARM: 410 MM
RAM STROKE SPEED: 180 MM/SEC
RETURN SPEED: 185 MM/SEC
WORK SPEED: 10,0 MM/SEC
WORK STROKE: 275 MM
DAYLIGTH: 550 MM
OIL VOLUME: 2 X 300 LTR.
TABLE HEIGHT: 900 MM
TABLE WIDTH: 160 MM
BACK STOP - ADJUSTABLE: 800 MM
TOTAL POWER REQUIREMENT: 2 X 18,5 KW
WEIGHT: 2 X 14.500 KG
RANGE L-W-H: 2 X 5150X2400X3000 MM
TANDEM HIGH-SPEED HYDR. PRESS BRAKE WITH INCREASED
INSTALLATION HEIGHT AND ENLARGED CYLINDER STROKE
-------------------------------------------------- ----------
AMENITIES:
- CYBELEC - CNC CONTROL MODEL MODEVA 12 S
- CONTROLLED AXES:
Y1 - Y2 - X - R AND CNC CROWNING
- BACK GAUGE WITH R-AXIS = 250 MM
CONTROLLED MOTORIZED ANTI DEFLECTION BY CNC -
- REHFUSS-TOP TOOL ROLERI PS 135-85 R08-
- UNIVERSALMATRIZENBLOCK 60X60 MM WITH
4VS IN THE DIE SHOE
- SICK PHOTOELECTRIC SENSOR BEHIND THE MACHINE
- HOERBIGER HYDRAULIC SYSTEM
- SIEMENS-ELECTRIC PLANT
- SICK PHOTOELECTRIC SENSOR IN FRONT OF THE MACHINE
- 2 FRONT SUPPORT ARMS / SLIDING SYSTEM
- DOUBLE FOOT SWITCH
- CE MARK / DECLARATION OF CONFORMITY
. - DEMAND -STATIONARY MANUAL: ENGINE & CONTROL IN GERMAN
- SAFETY MANUAL: PRESS BRAKE




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-pressure: 320 t<br/>chamfer lenght: 4100 mm<br/>distance between columns: 3600 mm<br/>column arm: 410 mm<br/>ram stroke speed: 140 mm/sec<br/>return speed: 150 mm/sec<br/>work speed: 10,5 mm/sec<br/>work stroke: 375 mm<br/>dayligth: 650 mm<br/>table height: 900 mm<br/>table width: 220 mm<br/>oil volume: 400 ltr.<br/>voltage: 400 volt<br/>total power requirement: 30,0 kw<br/>weight: 22.600 kg<br/>dimensions (hxwxd): 5.350 x 2.450 x 3.150 mm<br/>high-speed hydr.-abkantpresse mit vergrößerter <br/>einbauhöhe und vergrößertem zylinderhub<br/>------------------------------------------------------------<br/>ausstattung:<br/>- delem - cnc steuerung da 66 t mit touchscreen bildschirm<br/>- 6 gesteuterte achsen : y1 - y2 - x - r - z1 und z2 <br/>  sowie cnc-bombierung <br/>- gesteuerter hinteranschlag  <br/>  x-achse = 800 mm<br/>  r-achse = 250 mm<br/>  über kugelumlaufspindel<br/>- rehfuß-oberwerkzeug roleri 135.85.r08<br/>- universalmatrizenblock 180 x 180 mm <br/>   bestell nr. 1071.12.02.00 <br/>- sick- lichtschranke hinter d. maschine<br/>- bosch/hoerbiger hydraulikanlage<br/>- siemens - elektroanlage<br/>- fissler akas - laserschutzeinrichtung vor d. maschine<br/>- 2 vordere auflegearme sliding-system auf kugelrollen<br/>- doppelfußtaster<br/>- ce-zeichen / konformitätserklärung<br/>- bed.-handbuch : maschine u. steuerung auf deutsch<br/>- sicherheitshandbuch : abkantpressen<br/>-------------------------------------<br/>* maschinenvideo unter www.ab-maschinen.de *<br/><br/><br/><br/> PRESSURE: 320 T
CHAMFER LENGHT: 4100 MM
DISTANCE BETWEEN COLUMNS: 3600 MM
COLUMN ARM: 410 MM
RAM STROKE SPEED: 140 MM/SEC
RETURN SPEED: 150 MM/SEC
WORK SPEED: 10,5 MM/SEC
WORK STROKE: 375 MM
DAYLIGTH: 650 MM
TABLE HEIGHT: 900 MM
TABLE WIDTH: 220 MM
OIL VOLUME: 400 LTR.
VOLTAGE: 400 VOLT
TOTAL POWER REQUIREMENT: 30,0 KW
WEIGHT: 22.600 KG
DIMENSIONS (HXWXD): 5.350 X 2.450 X 3.150 MM
HIGH-SPEED HYDR.-ABKANTPRESSE MIT VERGRößERTER
EINBAUHöHE UND VERGRößERTEM ZYLINDERHUB
------------------------------------------------------------
AUSSTATTUNG:
- DELEM - CNC STEUERUNG DA 66 T MIT TOUCHSCREEN BILDSCHIRM
- 6 GESTEUTERTE ACHSEN : Y1 - Y2 - X - R - Z1 UND Z2
SOWIE CNC-BOMBIERUNG
- GESTEUERTER HINTERANSCHLAG
X-ACHSE = 800 MM
R-ACHSE = 250 MM
üBER KUGELUMLAUFSPINDEL
- REHFUß-OBERWERKZEUG ROLERI 135.85.R08
- UNIVERSALMATRIZENBLOCK 180 X 180 MM
BESTELL NR. 1071.12.02.00
- SICK- LICHTSCHRANKE HINTER D. MASCHINE
- BOSCH/HOERBIGER HYDRAULIKANLAGE
- SIEMENS - ELEKTROANLAGE
- FISSLER AKAS - LASERSCHUTZEINRICHTUNG VOR D. MASCHINE
- 2 VORDERE AUFLEGEARME SLIDING-SYSTEM AUF KUGELROLLEN
- DOPPELFUßTASTER
- CE-ZEICHEN / KONFORMITäTSERKLäRUNG
- BED.-HANDBUCH : MASCHINE U. STEUERUNG AUF DEUTSCH
- SICHERHEITSHANDBUCH : ABKANTPRESSEN
-------------------------------------
* MASCHINENVIDEO UNTER WWW.AB-MASCHINEN.DE *



Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>chamfer lenght:2600 mm<br/>distance between columns:2200 mm<br/>column arm:410 mm<br/>ram stroke speed:200 mm/sec<br/>return speed:155 mm/sec<br/>working speed:9,5 mm/sec<br/>work stroke:275 mm<br/>oil volume:150 l<br/>dayligth:530 mm<br/>table height:900 mm<br/>table width:90 mm<br/>total power requirement:7,5 kw<br/>weight of the machine ca.:7000 kg<br/>dimensions of the machine ca.:3750 x 1950 x 2800 mm<br/><br/>1 brand new, hydraulic ermak power-bend falcon 26.100 cnc press brake, directly from the factory, with following equipment: - motorized back gauge with r-axis  x = 800 mm  r = 250 mm (+2 stop fingers on ball screws) - 2 front support arms (with t-slot and cam) - controlled axis y1-y2-x-r- c-crowning system - elektr. crowning system controlled with cnc - top tool with quick-clamping system - 4v universal die-block - bosch/hoerbiger hydraulic system - siemens electronic - sick light barrier - fissler akas laser-light barrier - swivable control panel - double foot switch - ce mark / conformity declaration - operation manual PRESSURE:100 T
CHAMFER LENGHT:2600 MM
DISTANCE BETWEEN COLUMNS:2200 MM
COLUMN ARM:410 MM
RAM STROKE SPEED:200 MM/SEC
RETURN SPEED:155 MM/SEC
WORKING SPEED:9,5 MM/SEC
WORK STROKE:275 MM
OIL VOLUME:150 L
DAYLIGTH:530 MM
TABLE HEIGHT:900 MM
TABLE WIDTH:90 MM
TOTAL POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:7000 KG
DIMENSIONS OF THE MACHINE CA.:3750 X 1950 X 2800 MM

1 BRAND NEW, HYDRAULIC ERMAK POWER-BEND FALCON 26.100 CNC PRESS BRAKE, DIRECTLY FROM THE FACTORY, WITH FOLLOWING EQUIPMENT: - MOTORIZED BACK GAUGE WITH R-AXIS X = 800 MM R = 250 MM (+2 STOP FINGERS ON BALL SCREWS) - 2 FRONT SUPPORT ARMS (WITH T-SLOT AND CAM) - CONTROLLED AXIS Y1-Y2-X-R- C-CROWNING SYSTEM - ELEKTR. CROWNING SYSTEM CONTROLLED WITH CNC - TOP TOOL WITH QUICK-CLAMPING SYSTEM - 4V UNIVERSAL DIE-BLOCK - BOSCH/HOERBIGER HYDRAULIC SYSTEM - SIEMENS ELECTRONIC - SICK LIGHT BARRIER - FISSLER AKAS LASER-LIGHT BARRIER - SWIVABLE CONTROL PANEL - DOUBLE FOOT SWITCH - CE MARK / CONFORMITY DECLARATION - OPERATION MANUAL
Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pressure:320 t<br/>chamfer lenght:4100 mm<br/>distance between columns:3600 mm<br/>column arm:410 mm<br/>ram stroke speed:140 mm/sec<br/>return speed:150 mm/sec<br/>working speed:10,5 mm/sec<br/>work stroke:375 mm<br/>dayligth:650 mm<br/>table height:900 mm<br/>table width:220 mm<br/>oil volume:400 l<br/>voltage:400 v<br/>total power requirement:30 kw<br/>weight of the machine ca.:22600 kg<br/>dimensions of the machine ca.:5350 x 2450 x 3150 mm<br/><br/>1 brandnew ermak speed-bend 4.320 hydr. press brake, directly from the factory, with delem da 66 t cnc control and following equipment: - controlled back gauge with r-axis  x = 800 mm  r = 250 mm - finger adjustment z1 + z2 through ball screw - 2 front support arms  - controlled axis y1-y2-x-r-z1-z2 + cnc-crowning system4 - top tool  - 4v universal die-block - bosch/hoerbiger hydraulic system - siemens electronic - sick light barrier - fissler akas laser-light barrier - double foot switch - ce mark / conformity declaration - operation manual PRESSURE:320 T
CHAMFER LENGHT:4100 MM
DISTANCE BETWEEN COLUMNS:3600 MM
COLUMN ARM:410 MM
RAM STROKE SPEED:140 MM/SEC
RETURN SPEED:150 MM/SEC
WORKING SPEED:10,5 MM/SEC
WORK STROKE:375 MM
DAYLIGTH:650 MM
TABLE HEIGHT:900 MM
TABLE WIDTH:220 MM
OIL VOLUME:400 L
VOLTAGE:400 V
TOTAL POWER REQUIREMENT:30 KW
WEIGHT OF THE MACHINE CA.:22600 KG
DIMENSIONS OF THE MACHINE CA.:5350 X 2450 X 3150 MM

1 BRANDNEW ERMAK SPEED-BEND 4.320 HYDR. PRESS BRAKE, DIRECTLY FROM THE FACTORY, WITH DELEM DA 66 T CNC CONTROL AND FOLLOWING EQUIPMENT: - CONTROLLED BACK GAUGE WITH R-AXIS X = 800 MM R = 250 MM - FINGER ADJUSTMENT Z1 + Z2 THROUGH BALL SCREW - 2 FRONT SUPPORT ARMS - CONTROLLED AXIS Y1-Y2-X-R-Z1-Z2 + CNC-CROWNING SYSTEM4 - TOP TOOL - 4V UNIVERSAL DIE-BLOCK - BOSCH/HOERBIGER HYDRAULIC SYSTEM - SIEMENS ELECTRONIC - SICK LIGHT BARRIER - FISSLER AKAS LASER-LIGHT BARRIER - DOUBLE FOOT SWITCH - CE MARK / CONFORMITY DECLARATION - OPERATION MANUAL
Vendedor: SALING Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HOERBIGER types: