1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-2-spindle copy milling machine
sma-ref-6411
category: metal window construction machines
manufacturer: elumatec
type: kf 78 / 60
year of construction: 1992
spindle: 1 vertical milling motor
1 horizontal milling motor
6,000 / 12,000 rev/min
condition: ready to use
under current
location: north rhine-westphalia
dimensions: weight: 230 kg
availability: immediately 2-SPINDLE COPY MILLING MACHINE SMA-REF-6411 CATEGORY: METAL WINDOW CONSTRUCTION MACHINES MANUFACTURER: ELUMATEC TYPE: KF 78 / 60 YEAR OF CONSTRUCTION: 1992 SPINDLE: 1 VERTICAL MILLING MOTOR 1 HORIZONTAL MILLING MOTOR 6,000 / 12,000 REV/MIN CONDITION: READY TO USE UNDER CURRENT LOCATION: NORTH RHINE-WESTPHALIA DIMENSIONS: WEIGHT: 230 KG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 600 mm<br/>grinding width: 375 mm<br/>workpiece height: 375 mm<br/>table load: 0,60 t<br/>table surface area: 900x350 mm<br/>table adjustment - longitudinal: max.800 mm<br/>table feed: 2 - 30 m/min<br/>cross travel: 360 mm<br/>cross feed: regelbar 0,3 mm<br/>vertical feed: 180 mm/min<br/>grinding spindle speed: 1440 / 2900 u/min<br/>grinding wheel motor: 3,70 / 4,70 kw<br/>grinding wheel size: 300 x 50 x 76,2 mm<br/>rapid traverse cross: 1200 mm/min<br/>table drive: 3 kw<br/>crossrail -rapid travel: 1200 mm/min<br/>control:  <br/>total power requirement: 12,00 kw<br/>weight of the machine ca.: 3,30 t<br/>dimensions of the machine ca.: 4,00 x 3,00 x h2,5 m<br/><br/><br/><br/><br/><br/> GRINDING LENGTH: 600 MM
GRINDING WIDTH: 375 MM
WORKPIECE HEIGHT: 375 MM
TABLE LOAD: 0,60 T
TABLE SURFACE AREA: 900X350 MM
TABLE ADJUSTMENT - LONGITUDINAL: MAX.800 MM
TABLE FEED: 2 - 30 M/MIN
CROSS TRAVEL: 360 MM
CROSS FEED: REGELBAR 0,3 MM
VERTICAL FEED: 180 MM/MIN
GRINDING SPINDLE SPEED: 1440 / 2900 U/MIN
GRINDING WHEEL MOTOR: 3,70 / 4,70 KW
GRINDING WHEEL SIZE: 300 X 50 X 76,2 MM
RAPID TRAVERSE CROSS: 1200 MM/MIN
TABLE DRIVE: 3 KW
CROSSRAIL -RAPID TRAVEL: 1200 MM/MIN
CONTROL:
TOTAL POWER REQUIREMENT: 12,00 KW
WEIGHT OF THE MACHINE CA.: 3,30 T
DIMENSIONS OF THE MACHINE CA.: 4,00 X 3,00 X H2,5 M





Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-the cable peeling machine rc 3000 is suited to recycle all types of electric cable with pvc and rubber coat. it's a robust stand-alone.
features: large peeling area, easy adjustment.
the machine has its own cutting system for thin cable (approx. 1-12 mm) and a horizontal two blade cutting system for cable 12-115 mm diameter.

technical data
diameter cable: 1 mm to 115 mm
number of blades: 3
cutting speed: 19-35 m / min (kabelabhã¤ngig)
drive: electric motor 2,2 kw / 400 v / 50 hz
dimensions: l 800 mm x w 670 mm x h 1,470 mm
weight: approx. 370 kg
  THE CABLE PEELING MACHINE RC 3000 IS SUITED TO RECYCLE ALL TYPES OF ELECTRIC CABLE WITH PVC AND RUBBER COAT. IT'S A ROBUST STAND-ALONE. FEATURES: LARGE PEELING AREA, EASY ADJUSTMENT. THE MACHINE HAS ITS OWN CUTTING SYSTEM FOR THIN CABLE (APPROX. 1-12 MM) AND A HORIZONTAL TWO BLADE CUTTING SYSTEM FOR CABLE 12-115 MM DIAMETER. TECHNICAL DATA DIAMETER CABLE: 1 MM TO 115 MM NUMBER OF BLADES: 3 CUTTING SPEED: 19-35 M / MIN (KABELABH&ATILDE;&CURREN;NGIG) DRIVE: ELECTRIC MOTOR 2,2 KW / 400 V / 50 HZ DIMENSIONS: L 800 MM X W 670 MM X H 1,470 MM WEIGHT: APPROX. 370 KG
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-cutting diameter: 120 mm<br/>saw blade diameter: 370 mm<br/>stroke: 180 x 100 mm<br/>vice: 190 mm<br/>capacity 45 degrees: i horizontal: 125x95 mm<br/>capacity 45 degrees: round: 110 mm<br/>capacity 90 degrees: flat: 180x95 mm<br/>capacity 60 degrees: flat: 90x95 mm<br/>capacity 60 degrees: round: 90 mm<br/>dimensions of saw-blade: 370x32x2,5 mm<br/>engine output: 5,6 kw<br/>weight: 640 kg<br/>range l-w-h: 0,9 x 1,5 x 1,91 m<br/><br/><br/><br/><br/> CUTTING DIAMETER: 120 MM
SAW BLADE DIAMETER: 370 MM
STROKE: 180 X 100 MM
VICE: 190 MM
CAPACITY 45 DEGREES: I HORIZONTAL: 125X95 MM
CAPACITY 45 DEGREES: ROUND: 110 MM
CAPACITY 90 DEGREES: FLAT: 180X95 MM
CAPACITY 60 DEGREES: FLAT: 90X95 MM
CAPACITY 60 DEGREES: ROUND: 90 MM
DIMENSIONS OF SAW-BLADE: 370X32X2,5 MM
ENGINE OUTPUT: 5,6 KW
WEIGHT: 640 KG
RANGE L-W-H: 0,9 X 1,5 X 1,91 M




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: 4.250 €
Ubicación: Land-saw blade diameter: 420 mm cutting length 410 mm (90 â°)
cutting height 170 mm (90 â°) miter range horizontal: 45 â°-90 â°-25 â°
miter range vertical: 90 â°-45 â° (left)
digital display of pan and tilt angle
oil brake
pneumatic lubrication of saw blade
pneumatic locking brake for the pan
inclination using hand crank
belvbpmvgz
weight: approx. 140 kg  SAW BLADE DIAMETER: 420 MM CUTTING LENGTH 410 MM (90 &ACIRC;&DEG;) CUTTING HEIGHT 170 MM (90 &ACIRC;&DEG;) MITER RANGE HORIZONTAL: 45 &ACIRC;&DEG;-90 &ACIRC;&DEG;-25 &ACIRC;&DEG; MITER RANGE VERTICAL: 90 &ACIRC;&DEG;-45 &ACIRC;&DEG; (LEFT) DIGITAL DISPLAY OF PAN AND TILT ANGLE OIL BRAKE PNEUMATIC LUBRICATION OF SAW BLADE PNEUMATIC LOCKING BRAKE FOR THE PAN INCLINATION USING HAND CRANK BELVBPMVGZ WEIGHT: APPROX. 140 KG
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 4.500 €
Ubicación: Land-weight approx.: 11000 kg<br/>control: pc83 <br/>dimensions (l x w x h) approx.: 20000 x 2500 x 2700 mm<br/>c-axis: ja / yes <br/>software: woodwop <br/>working length x-axis: max. 5800 mm<br/>working width y-axis: max. 1480 mm<br/>main spindle: 12 kw<br/>tool changer: 12-fach / 12-fold <br/>vacuum pump: 100 cbm/h<br/>drilling head vertical x-axis: 6 piece<br/>drilling head vertical y-axis: 7 piece<br/>drilling head horizontal x-axis: 2 piece<br/>drilling head horizontal y-axis: 2 piece<br/>edge gluing unit: ja / yes <br/>travelling way z-axis: 535 mm<br/>path-feed rate max. x-axis: 80 m/min<br/>path-feed rate max. y-axis: 80 m/min<br/>path-feed rate max. z-axis: 30 m/min<br/>description: <b>well maintained and best equipped homag optimat baz 32/50/g cnc machining centre with edge gluing unit as 2nd y-axis.</b><br> <br> <b>technical data:</b><br> - workpiece length max. 5.800 mm<br> - workpiece length max. 2.200 mm pendulum operation<br> - workpiece width max. 1.480 mm milling with tools Ø 20 mm<br> - workpiece width max. 1.400 mm with edge gluing unit<br> - workpiece width max. 1.300 mm all aggregates<br> - edge gluing unit 360 degree as 2nd y-axis with 3-fold edge magazine<br> <b>aggregate für den werkzeugwechsler:</b><br> - blow nozzle<br> - chop saw<br> - flush trimming 1 stück<br> - drilling unit 4-spindle horizontal<br> <br> <b>(further tools and units for the tool changer are not included within delivery. transportation of the dismantled machine requires a transport rack supplied by homag which incurs costs of eur 4,000,-- plus vat. after the transport rack has been returned to surplex, this amount minus a value deduction of 10 % will be refunded.)</b> WEIGHT APPROX.: 11000 KG
CONTROL: PC83
DIMENSIONS (L X W X H) APPROX.: 20000 X 2500 X 2700 MM
C-AXIS: JA / YES
SOFTWARE: WOODWOP
WORKING LENGTH X-AXIS: MAX. 5800 MM
WORKING WIDTH Y-AXIS: MAX. 1480 MM
MAIN SPINDLE: 12 KW
TOOL CHANGER: 12-FACH / 12-FOLD
VACUUM PUMP: 100 CBM/H
DRILLING HEAD VERTICAL X-AXIS: 6 PIECE
DRILLING HEAD VERTICAL Y-AXIS: 7 PIECE
DRILLING HEAD HORIZONTAL X-AXIS: 2 PIECE
DRILLING HEAD HORIZONTAL Y-AXIS: 2 PIECE
EDGE GLUING UNIT: JA / YES
TRAVELLING WAY Z-AXIS: 535 MM
PATH-FEED RATE MAX. X-AXIS: 80 M/MIN
PATH-FEED RATE MAX. Y-AXIS: 80 M/MIN
PATH-FEED RATE MAX. Z-AXIS: 30 M/MIN
DESCRIPTION: WELL MAINTAINED AND BEST EQUIPPED HOMAG OPTIMAT BAZ 32/50/G CNC MACHINING CENTRE WITH EDGE GLUING UNIT AS 2ND Y-AXIS.

TECHNICAL DATA:
- WORKPIECE LENGTH MAX. 5.800 MM
- WORKPIECE LENGTH MAX. 2.200 MM PENDULUM OPERATION
- WORKPIECE WIDTH MAX. 1.480 MM MILLING WITH TOOLS Ø 20 MM
- WORKPIECE WIDTH MAX. 1.400 MM WITH EDGE GLUING UNIT
- WORKPIECE WIDTH MAX. 1.300 MM ALL AGGREGATES
- EDGE GLUING UNIT 360 DEGREE AS 2ND Y-AXIS WITH 3-FOLD EDGE MAGAZINE
AGGREGATE FüR DEN WERKZEUGWECHSLER:
- BLOW NOZZLE
- CHOP SAW
- FLUSH TRIMMING 1 STüCK
- DRILLING UNIT 4-SPINDLE HORIZONTAL

(FURTHER TOOLS AND UNITS FOR THE TOOL CHANGER ARE NOT INCLUDED WITHIN DELIVERY. TRANSPORTATION OF THE DISMANTLED MACHINE REQUIRES A TRANSPORT RACK SUPPLIED BY HOMAG WHICH INCURS COSTS OF EUR 4,000,-- PLUS VAT. AFTER THE TRANSPORT RACK HAS BEEN RETURNED TO SURPLEX, THIS AMOUNT MINUS A VALUE DEDUCTION OF 10 % WILL BE REFUNDED.)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-sedin
machine name  vertical turret lathe
manufacturer: sedin  
model: vtl 1512
location: mumbai
year of manufacturing: na
technical specification: 
table diameter: 1120 mm
max. work-piece:
diameter: 1250 mm height: 1000 mm weight: 3200 kg
table speeds range per 1 min: 5-250 tool dimensions: 25×40
max. horizontal travel of the vertical ram: 775 mm
max. vertical travel of the vertical ram: 700 mm
max. horizontal travel of the horizontal ram: 630 mm
max. vertical travel of the horizontal ram: 1000 mm
max. turning angle of the vertical ram: 45 degrees
cross rail:
travel: 660 mm speed: 400 mm/min
main motor power: 30 kw
overall dimensions: 2750×2975×4100 mm
machine weight: 16500 kg SEDIN MACHINE NAME VERTICAL TURRET LATHE MANUFACTURER: SEDIN MODEL: VTL 1512 LOCATION: MUMBAI YEAR OF MANUFACTURING: NA TECHNICAL SPECIFICATION: TABLE DIAMETER: 1120 MM MAX. WORK-PIECE: DIAMETER: 1250 MM HEIGHT: 1000 MM WEIGHT: 3200 KG TABLE SPEEDS RANGE PER 1 MIN: 5-250 TOOL DIMENSIONS: 25×40 MAX. HORIZONTAL TRAVEL OF THE VERTICAL RAM: 775 MM MAX. VERTICAL TRAVEL OF THE VERTICAL RAM: 700 MM MAX. HORIZONTAL TRAVEL OF THE HORIZONTAL RAM: 630 MM MAX. VERTICAL TRAVEL OF THE HORIZONTAL RAM: 1000 MM MAX. TURNING ANGLE OF THE VERTICAL RAM: 45 DEGREES CROSS RAIL: TRAVEL: 660 MM SPEED: 400 MM/MIN MAIN MOTOR POWER: 30 KW OVERALL DIMENSIONS: 2750×2975×4100 MM MACHINE WEIGHT: 16500 KG
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2016<br/>hours of operation 1,937 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories:<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider.  to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 1,937 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2016
HOURS OF OPERATION 1,937 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES:
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 1,937 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-master-collapse saw
sma-ref-6363
category: saw mill sawing and cutting
manufacturer: baljer & zembrod
type: ers
year of built: unknown
workspace:
1,200 x 6,000 mm
larger diameter possible
saws: horizontal stihl chainsaw
condition:
ready for use
documentation available
location: hessen
availability: immediately
terms of delivery:
from site
free truck loading
terms of payment: 100% prior to removal/loading MASTER-COLLAPSE SAW SMA-REF-6363 CATEGORY: SAW MILL SAWING AND CUTTING MANUFACTURER: BALJER & ZEMBROD TYPE: ERS YEAR OF BUILT: UNKNOWN WORKSPACE: 1,200 X 6,000 MM LARGER DIAMETER POSSIBLE SAWS: HORIZONTAL STIHL CHAINSAW CONDITION: READY FOR USE DOCUMENTATION AVAILABLE LOCATION: HESSEN AVAILABILITY: IMMEDIATELY TERMS OF DELIVERY: FROM SITE FREE TRUCK LOADING TERMS OF PAYMENT: 100% PRIOR TO REMOVAL/LOADING
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer bollegraaf<br/>typ hbc 80 ak<br/>year of construction 1997<br/>stand  02/2019 operating hours counter 42,555 hours, the counter was probably replaced, the machine has run more hours, exact status not known.<br/>press power main press 78 tons<br/>press power of pre-press 45 tons<br/>feed channel 1,500 x 1,100 mm<br/>filling volume 2.9 m³<br/>theoretic cycle time 22 sec.<br/>throughput rate under operating conditions 300 up to 450 m³/hour<br/>bale size 1,100 x 720 mm, length variable<br/>driving motor 45 kw<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 10 tons/hour<br/>bulk weight of 50 kg/cbm  approx. 18 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 30 tons/hour<br/>throughput rate with ruffler  approx. 20 tons/hour<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 900 l<br/>sps controller (manuf., type) siemens s5-100 u<br/>operating panel (manuf., type)  siemens simatic op7 <br/>transport dimensions only baler 10,690 x 2,320 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/><br/>condition of the baler:<br/>the press comes from a production plant, was regularly maintained and repaired. in 2017 were invested 32.000,- ? and in 2018 more than 48.000,- ?  in the maintenance and repair of the machine.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER BOLLEGRAAF
TYP HBC 80 AK
YEAR OF CONSTRUCTION 1997
STAND 02/2019 OPERATING HOURS COUNTER 42,555 HOURS, THE COUNTER WAS PROBABLY REPLACED, THE MACHINE HAS RUN MORE HOURS, EXACT STATUS NOT KNOWN.
PRESS POWER MAIN PRESS 78 TONS
PRESS POWER OF PRE-PRESS 45 TONS
FEED CHANNEL 1,500 X 1,100 MM
FILLING VOLUME 2.9 M³
THEORETIC CYCLE TIME 22 SEC.
THROUGHPUT RATE UNDER OPERATING CONDITIONS 300 UP TO 450 M³/HOUR
BALE SIZE 1,100 X 720 MM, LENGTH VARIABLE
DRIVING MOTOR 45 KW
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 10 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 18 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 30 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/HOUR
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 900 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S5-100 U
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC OP7
TRANSPORT DIMENSIONS ONLY BALER 10,690 X 2,320 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS

CONDITION OF THE BALER:
THE PRESS COMES FROM A PRODUCTION PLANT, WAS REGULARLY MAINTAINED AND REPAIRED. IN 2017 WERE INVESTED 32.000,- ? AND IN 2018 MORE THAN 48.000,- ? IN THE MAINTENANCE AND REPAIR OF THE MACHINE.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-booklet maker new generation from horizon with the following specification:

vac 100 a tower
stitcher folder spf-200 a totaliser: 1.944 037
fore edge trimmer fc 200 a 
sheet feeder hof- 30
short delivery

still in production. available: 04 / 2019

can ship worldwide!


 BOOKLET MAKER NEW GENERATION FROM HORIZON WITH THE FOLLOWING SPECIFICATION: VAC 100 A TOWER STITCHER FOLDER SPF-200 A TOTALISER: 1.944 037 FORE EDGE TRIMMER FC 200 A SHEET FEEDER HOF- 30 SHORT DELIVERY STILL IN PRODUCTION. AVAILABLE: 04 / 2019 CAN SHIP WORLDWIDE!
Vendedor: TISKSTROJ - CORUM
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer bollegraaf<br/>typ hbc 80 k<br/>year of construction 2010<br/>hours of operation 33,931 hours<br/>press power main press 86 tons by 275 bar<br/>press power of pre-press max. 42 tons<br/>feed channel 1,485 x 1,100 mm<br/>filling volume 2.9 m³<br/>theoretic cycle time 22 sec.<br/>theoretic throughput capacity up to 450 m³/hour<br/>bale size 1,100 x 720 mm, lenght variable<br/>driving motor 45 kw<br/>connected load 60 kw<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 13 tons/hour<br/>bulk weight of 50 kg/cbm  approx. 20 tons/hour<br/>bulk weight of 100 kg/cbm  approx. 30 tons/hour<br/>throughput rate with ruffler  approx. 20 tons/hour<br/>bale weight 550 up to 750 kg, depends on material<br/>volume hydraulic oil tank 830 l<br/>sps controller (manuf., type) schneider<br/>operating panel (manuf., type) schneider magnelis<br/>transport dimensions only baler 10,900 x 2,320 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 24 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER BOLLEGRAAF
TYP HBC 80 K
YEAR OF CONSTRUCTION 2010
HOURS OF OPERATION 33,931 HOURS
PRESS POWER MAIN PRESS 86 TONS BY 275 BAR
PRESS POWER OF PRE-PRESS MAX. 42 TONS
FEED CHANNEL 1,485 X 1,100 MM
FILLING VOLUME 2.9 M³
THEORETIC CYCLE TIME 22 SEC.
THEORETIC THROUGHPUT CAPACITY UP TO 450 M³/HOUR
BALE SIZE 1,100 X 720 MM, LENGHT VARIABLE
DRIVING MOTOR 45 KW
CONNECTED LOAD 60 KW
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 13 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 20 TONS/HOUR
BULK WEIGHT OF 100 KG/CBM APPROX. 30 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/HOUR
BALE WEIGHT 550 UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 830 L
SPS CONTROLLER (MANUF., TYPE) SCHNEIDER
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGNELIS
TRANSPORT DIMENSIONS ONLY BALER 10,900 X 2,320 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 24 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-cutting length: 5300mm, max. horizontal/ vertical cutting height: 2000/ 2100mm, max. plate height: 2100mm, speed: 0-20m/min, saw blade diameter: 300mm, bore: 30mm, width: 1750mm, height: 3050mm.  CUTTING LENGTH: 5300MM, MAX. HORIZONTAL/ VERTICAL CUTTING HEIGHT: 2000/ 2100MM, MAX. PLATE HEIGHT: 2100MM, SPEED: 0-20M/MIN, SAW BLADE DIAMETER: 300MM, BORE: 30MM, WIDTH: 1750MM, HEIGHT: 3050MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-manufacturer hsm<br/>type vk 75 / 1600<br/>year of construction 1998<br/>hours of operation 54,412 hours<br/>press power main press 75 tons<br/>specific press capacity 99,2 n/cm²<br/>feed channel 720 x 1,600 mm (w x l)<br/>capacity per cycle time 1,21 m³<br/>theoretic cycle time 14,4 sec.<br/>theoretic  throughput rate 339 m³/h<br/>bale size 720 x 1,050 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 55 kw, 500v, 50 hz, 79 a<br/>connected load 64 kw, 500 v, 98 a<br/>tying system 5-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 6,8 tons/h<br/>bulk weight of 50 kg/cbm up to 16,9 tons/h<br/>bale weight up to 620 kg/bale, depends on material<br/>volume hydraulic oil tank 1,250 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic multi panel<br/>transport dimensions only baler 6,180 x 2,250 x 3,260 mm (l x w x h)<br/>machine weight baler approx. 15,5 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 75 / 1600
YEAR OF CONSTRUCTION 1998
HOURS OF OPERATION 54,412 HOURS
PRESS POWER MAIN PRESS 75 TONS
SPECIFIC PRESS CAPACITY 99,2 N/CM²
FEED CHANNEL 720 X 1,600 MM (W X L)
CAPACITY PER CYCLE TIME 1,21 M³
THEORETIC CYCLE TIME 14,4 SEC.
THEORETIC THROUGHPUT RATE 339 M³/H
BALE SIZE 720 X 1,050 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 55 KW, 500V, 50 HZ, 79 A
CONNECTED LOAD 64 KW, 500 V, 98 A
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 6,8 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 16,9 TONS/H
BALE WEIGHT UP TO 620 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,250 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 3,260 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15,5 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-pneumatic dovetail cutter / nutfrã¤smaschine hoffmann type pu 2 vh, milling group for a keyway per working cycle vertically or horizontally, foot switch, engine: 1.7 kw, year 2004, passage height: 250 mm, depth vertical / horizontal: 180 mm / 250 mm, incl. roller conveyor. PNEUMATIC DOVETAIL CUTTER / NUTFR&ATILDE;&CURREN;SMASCHINE HOFFMANN TYPE PU 2 VH, MILLING GROUP FOR A KEYWAY PER WORKING CYCLE VERTICALLY OR HORIZONTALLY, FOOT SWITCH, ENGINE: 1.7 KW, YEAR 2004, PASSAGE HEIGHT: 250 MM, DEPTH VERTICAL / HORIZONTAL: 180 MM / 250 MM, INCL. ROLLER CONVEYOR.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 140 k<br/>year of construction 1999<br/>working hours 83,877 hours<br/>press power main press 140 tons<br/>press power of pre-press 70 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 4,34 cbm<br/>theoretic cycle time 16 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 2 x 75 kw<br/>connected load 209 kw<br/>tying system 5 fold vertical, 5 fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 30 tons/h<br/>bulk weight of 50 kg/cbm approx. 46 tons/h<br/>bulk weight of 100 kg/cbm approx. 82 tons/h<br/>bale weight 850 up to 1,500 kg<br/>baler dimensions built up with hopper approx.13,200 x 2,750 x 5,020    mm (l x w x h)<br/>transport dimensions only baler approx.1,200 x 2,750 x 3,400 mm (l x w x h)<br/>machine weight baler approx. 43 tons<br/> <br/>comments: one of the two pumps is defective. the plc has already been renewed and replaced with a schneider magnelis touch panel. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.<br/>documentation (manual, ce, electr./hydr.-drawings, etc.) the technical documentation is complete. MANUFACTURER BOLLEGRAAF
TYPE HBC 140 K
YEAR OF CONSTRUCTION 1999
WORKING HOURS 83,877 HOURS
PRESS POWER MAIN PRESS 140 TONS
PRESS POWER OF PRE-PRESS 70 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 4,34 CBM
THEORETIC CYCLE TIME 16 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 75 KW
CONNECTED LOAD 209 KW
TYING SYSTEM 5 FOLD VERTICAL, 5 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 30 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 46 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 82 TONS/H
BALE WEIGHT 850 UP TO 1,500 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.13,200 X 2,750 X 5,020 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX.1,200 X 2,750 X 3,400 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 43 TONS

COMMENTS: ONE OF THE TWO PUMPS IS DEFECTIVE. THE PLC HAS ALREADY BEEN RENEWED AND REPLACED WITH A SCHNEIDER MAGNELIS TOUCH PANEL. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS, ETC.) THE TECHNICAL DOCUMENTATION IS COMPLETE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-5-axes cnc working center - cms avant 1b/560-px5
year of manufacturing 2006
ce standard
no. 5 axes controlled
axes strokes: x=5600mm y=2350mm z=720mm b=+/-120° c=+/-270°
working area 5220x1520 mm
px5 5-axes unit - hsk63f collect - power 12 kw (16,3 hp) - liquid cooled - max rotation 24000 rpm - pneumatic brakes on b and c axes
no. 3 tool changer disks on y carriage with no. 16 positions each (no. 48 total positions)
vertical and horizontal drilling unit with 7+2+2 pences
working table with no. 8 schmalz clamps/cups support - no. 8+2 frontal/lateral reference stops - no. 8 bars for pieces lifting
motorized belt for chips extraction
no. 12 suction cups 145x35x150h mm - no. 12 suction cups 145x145x150h mm - no. 10 vertical clamps h 150 mm - n. 2 horizontal clamps
no. 2 vacuum pump 250 m3/h each
automatic lubrication
cnc osai serie 10/510i with panel control on movable carriege
air conditioner for electric cabinet
frontal bumper + surrounding metal fences 
tools and toolholders not included
user and mantainance manuals
area of installed machine 10000x6500x3800h mm
total power supply 45kva
machine tested (video available upon request) 5-AXES CNC WORKING CENTER - CMS AVANT 1B/560-PX5 YEAR OF MANUFACTURING 2006 CE STANDARD NO. 5 AXES CONTROLLED AXES STROKES: X=5600MM Y=2350MM Z=720MM B=+/-120° C=+/-270° WORKING AREA 5220X1520 MM PX5 5-AXES UNIT - HSK63F COLLECT - POWER 12 KW (16,3 HP) - LIQUID COOLED - MAX ROTATION 24000 RPM - PNEUMATIC BRAKES ON B AND C AXES NO. 3 TOOL CHANGER DISKS ON Y CARRIAGE WITH NO. 16 POSITIONS EACH (NO. 48 TOTAL POSITIONS) VERTICAL AND HORIZONTAL DRILLING UNIT WITH 7+2+2 PENCES WORKING TABLE WITH NO. 8 SCHMALZ CLAMPS/CUPS SUPPORT - NO. 8+2 FRONTAL/LATERAL REFERENCE STOPS - NO. 8 BARS FOR PIECES LIFTING MOTORIZED BELT FOR CHIPS EXTRACTION NO. 12 SUCTION CUPS 145X35X150H MM - NO. 12 SUCTION CUPS 145X145X150H MM - NO. 10 VERTICAL CLAMPS H 150 MM - N. 2 HORIZONTAL CLAMPS NO. 2 VACUUM PUMP 250 M3/H EACH AUTOMATIC LUBRICATION CNC OSAI SERIE 10/510I WITH PANEL CONTROL ON MOVABLE CARRIEGE AIR CONDITIONER FOR ELECTRIC CABINET FRONTAL BUMPER + SURROUNDING METAL FENCES TOOLS AND TOOLHOLDERS NOT INCLUDED USER AND MANTAINANCE MANUALS AREA OF INSTALLED MACHINE 10000X6500X3800H MM TOTAL POWER SUPPLY 45KVA MACHINE TESTED (VIDEO AVAILABLE UPON REQUEST)
Vendedor: Artuso Trading & Tech s.r.l.
Año de construcción: usado
Precio: 29.500 €
Ubicación: Land-manufacturer hsm<br/>type vk 4012<br/>year of construction 2003<br/>hours of operation 18,158 hours<br/>quantity of pressed bales 71,479 bales<br/>press power main press 45 tons<br/>specific press capacity 69,4 n/cm²<br/>feed channel 820 x 1,250 mm (w x l)<br/>capacity per cycle time 0,81 m³<br/>theoretic cycle time 17 sec.<br/>theoretic  throughput rate 174 m³/h<br/>bale size 900 x 720 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 15 kw<br/>connected load 18 kw, 500 v, 50 hz, 30 a<br/>tying system 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3,5 tons/h<br/>bulk weight of 50 kg/cbm up to 8,7 tons/h<br/>bale weight up to 400 kg/bale, depends on material<br/>volume hydraulic oil tank 300 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic hmi<br/>transport dimensions only baler 6,180 x 2,250 x 2,350 mm (l x w x h)<br/>machine weight baler approx. 7 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 4012
YEAR OF CONSTRUCTION 2003
HOURS OF OPERATION 18,158 HOURS
QUANTITY OF PRESSED BALES 71,479 BALES
PRESS POWER MAIN PRESS 45 TONS
SPECIFIC PRESS CAPACITY 69,4 N/CM²
FEED CHANNEL 820 X 1,250 MM (W X L)
CAPACITY PER CYCLE TIME 0,81 M³
THEORETIC CYCLE TIME 17 SEC.
THEORETIC THROUGHPUT RATE 174 M³/H
BALE SIZE 900 X 720 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 15 KW
CONNECTED LOAD 18 KW, 500 V, 50 HZ, 30 A
TYING SYSTEM 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3,5 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 8,7 TONS/H
BALE WEIGHT UP TO 400 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 300 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC HMI
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 2,350 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 7 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-offer this horizontal press by a length with approx 300 cm, as shown in the photos.
external hydraulic pump / pump is older than the press please do you me ab 2500, - â?¬ offer, also like to telephone cally under 0176 27 44 64 14
 OFFER THIS HORIZONTAL PRESS BY A LENGTH WITH APPROX 300 CM, AS SHOWN IN THE PHOTOS. EXTERNAL HYDRAULIC PUMP / PUMP IS OLDER THAN THE PRESS PLEASE DO YOU ME AB 2500, - &ACIRC;?&NOT; OFFER, ALSO LIKE TO TELEPHONE CALLY UNDER 0176 27 44 64 14
Vendedor: Herr Venjacob
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer europress<br/>typ 6500 v5 h3<br/>year of construction 2009<br/>hours of operation 15,334 hours, stand january <br/>quantity of pressed bales 138,097 bales, stand january<br/>press power main press 120 tons<br/>specific press capacity 142 kg/cm²<br/>feed channel 1,650 x 1,100 mm (l x w)<br/>filling volume 3 m³<br/>capacity per cycle time 1,58 m³<br/>bale size 730 x 1,100 length variable<br/>driving motor 75 kw (1 x 30 kw + 1 x 45 kw, individually switchable)<br/>connected load 83 kw<br/>current consumption 150 a<br/>tying system 5-fold vertical, 3-fold horizontal, fully automatic (the uppermost horizontal needle channel is blocked)<br/>bale weight 450 to 900 kg, depending on bale length and material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  siemens s7-200<br/>operating panel (manuf., type)  siemens touchscreen<br/>baler dimensions built up with hopper 13,465 x 5,200 x 5,074 mm<br/>transport dimensions only baler 9,965 x 2,500 x 2,900 mm (l x w x h)<br/>machine weight baler approx. 38 tons<br/><br/>technical data conveyor belt<br/>manufacturer<br/>typ kgf 1600<br/>year of construction 2009<br/>driving motor 7,5 kw<br/>belt speed 0,3 m/sec.<br/>centre distance 13,550 mm<br/>length feeding conveyor 6.100 mm<br/>length elevating conveyor 9.507 mm<br/>length goose neck 1,002 mm<br/>grade 30°<br/>effecting width 1,600 mm<br/>height drive axle over ground 4,000 mm<br/>height of side wall feeding conv. 600 mm<br/>height of side wall elevating conv. 800 mm<br/>pit dimensions 10,030 x 2,460 x 1,250 mm (l x w x d)<br/>weight approx. 28 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  the press with conveyor belt is currently still in operation, the replacement with a new system is planned for the 2nd quarter of this year. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER EUROPRESS
TYP 6500 V5 H3
YEAR OF CONSTRUCTION 2009
HOURS OF OPERATION 15,334 HOURS, STAND JANUARY
QUANTITY OF PRESSED BALES 138,097 BALES, STAND JANUARY
PRESS POWER MAIN PRESS 120 TONS
SPECIFIC PRESS CAPACITY 142 KG/CM²
FEED CHANNEL 1,650 X 1,100 MM (L X W)
FILLING VOLUME 3 M³
CAPACITY PER CYCLE TIME 1,58 M³
BALE SIZE 730 X 1,100 LENGTH VARIABLE
DRIVING MOTOR 75 KW (1 X 30 KW + 1 X 45 KW, INDIVIDUALLY SWITCHABLE)
CONNECTED LOAD 83 KW
CURRENT CONSUMPTION 150 A
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC (THE UPPERMOST HORIZONTAL NEEDLE CHANNEL IS BLOCKED)
BALE WEIGHT 450 TO 900 KG, DEPENDING ON BALE LENGTH AND MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S7-200
OPERATING PANEL (MANUF., TYPE) SIEMENS TOUCHSCREEN
BALER DIMENSIONS BUILT UP WITH HOPPER 13,465 X 5,200 X 5,074 MM
TRANSPORT DIMENSIONS ONLY BALER 9,965 X 2,500 X 2,900 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 38 TONS

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER
TYP KGF 1600
YEAR OF CONSTRUCTION 2009
DRIVING MOTOR 7,5 KW
BELT SPEED 0,3 M/SEC.
CENTRE DISTANCE 13,550 MM
LENGTH FEEDING CONVEYOR 6.100 MM
LENGTH ELEVATING CONVEYOR 9.507 MM
LENGTH GOOSE NECK 1,002 MM
GRADE 30°
EFFECTING WIDTH 1,600 MM
HEIGHT DRIVE AXLE OVER GROUND 4,000 MM
HEIGHT OF SIDE WALL FEEDING CONV. 600 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
PIT DIMENSIONS 10,030 X 2,460 X 1,250 MM (L X W X D)
WEIGHT APPROX. 28 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. THE PRESS WITH CONVEYOR BELT IS CURRENTLY STILL IN OPERATION, THE REPLACEMENT WITH A NEW SYSTEM IS PLANNED FOR THE 2ND QUARTER OF THIS YEAR. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-tos	
machine name  horizontal boring machine
manufacturer  tos 
model  h 100a
location  transit
year of manufacturing na 
technical specification 
spindle diameter: 100mm 
spindle taper : iso 45
spindle travel : 900mm 
spindle speed : 1120 rpm
table size : 1250mm x 1250mm max 
table capacity : 6,600lb
x travel, cross : 1250mm 
y travel, vertical : 1200mm
z travel, longitudinal : 1800mm TOS MACHINE NAME HORIZONTAL BORING MACHINE MANUFACTURER TOS MODEL H 100A LOCATION TRANSIT YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION SPINDLE DIAMETER: 100MM SPINDLE TAPER : ISO 45 SPINDLE TRAVEL : 900MM SPINDLE SPEED : 1120 RPM TABLE SIZE : 1250MM X 1250MM MAX TABLE CAPACITY : 6,600LB X TRAVEL, CROSS : 1250MM Y TRAVEL, VERTICAL : 1200MM Z TRAVEL, LONGITUDINAL : 1800MM
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 110<br/>year of construction 2005<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 cbm<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 75 kw<br/>tying system  5-fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 16 tons/h<br/>bulk weight of 50 kg/cbm approx. 25 tons/h<br/>bulk weight of 100 kg/cbm approx. 47 tons/h<br/>bale weight 850 up to 1.400 kg<br/>hydralicoil 1,200 l<br/>baler dimensions built up with hopper approx.11,750 x 2,250 x 6,690   mm (l x w x h)<br/>transport dimensions only baler approx.11,750 x 2,250 x 3,150   mm (l x w x h)<br/>machine weight baler 36 tons<br/>comments this machine has a 5-fold horizontal binding system for difficult to press materials such as pet bottles and residual waste. in addition, the baler is equipped with a perforator for pet bottles.<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 110
YEAR OF CONSTRUCTION 2005
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 CBM
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 75 KW
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 47 TONS/H
BALE WEIGHT 850 UP TO 1.400 KG
HYDRALICOIL 1,200 L
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX.11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX.11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER 36 TONS
COMMENTS THIS MACHINE HAS A 5-FOLD HORIZONTAL BINDING SYSTEM FOR DIFFICULT TO PRESS MATERIALS SUCH AS PET BOTTLES AND RESIDUAL WASTE. IN ADDITION, THE BALER IS EQUIPPED WITH A PERFORATOR FOR PET BOTTLES.
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-travel in x 850 mm
travel in y: 330 mm
travel in z 440 mm
table size: 1240 x 335 mm
tool holder: sk 40
speed range: 56-2800 rpm
total power: 4 kw / 400 v
machine weight: 2000 kg

equipment / accessories:

3 axis digital display with screen
adjustable hand control panel
horizontal milling equipment
1 lg. milling
5 tool holder sk 40
coolant system
pivotable milling head with drilling tailstock
documentation

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before making a purchase in our factory under power.
 TRAVEL IN X 850 MM TRAVEL IN Y: 330 MM TRAVEL IN Z 440 MM TABLE SIZE: 1240 X 335 MM TOOL HOLDER: SK 40 SPEED RANGE: 56-2800 RPM TOTAL POWER: 4 KW / 400 V MACHINE WEIGHT: 2000 KG EQUIPMENT / ACCESSORIES: 3 AXIS DIGITAL DISPLAY WITH SCREEN ADJUSTABLE HAND CONTROL PANEL HORIZONTAL MILLING EQUIPMENT 1 LG. MILLING 5 TOOL HOLDER SK 40 COOLANT SYSTEM PIVOTABLE MILLING HEAD WITH DRILLING TAILSTOCK DOCUMENTATION ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>typ hbc 100 k<br/>year of construction 2000<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 19 sec.<br/>bale size 1,100 x 720 mm<br/>driving motor 75 kw<br/>tying system 5 fold vertical, 3 fold horizontal, fully automated<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx.. 16 tons/h<br/>bulk weight of 50 kg/cbm  approx.. 25 tons/h<br/>bulk weight of 100 kg/cbm  approx.. 47 tons/h<br/>bale weight 550 up to 880 kg, depends on material and bale lenght<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch<br/>baler dimensions built up with hopper 11,750 x 2,250 x 6,690 mm (l x w x h)<br/>transport dimensions only baler 11.750 x 2.250 x 3.150 mm (l x w x h)<br/>machine weight baler approx. 35 tons<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBC 100 K
YEAR OF CONSTRUCTION 2000
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 19 SEC.
BALE SIZE 1,100 X 720 MM
DRIVING MOTOR 75 KW
TYING SYSTEM 5 FOLD VERTICAL, 3 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX.. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX.. 25 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX.. 47 TONS/H
BALE WEIGHT 550 UP TO 880 KG, DEPENDS ON MATERIAL AND BALE LENGHT
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH
BALER DIMENSIONS BUILT UP WITH HOPPER 11,750 X 2,250 X 6,690 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 11.750 X 2.250 X 3.150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 35 TONS

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-manufacturer macpresse<br/>typ 111/1<br/>year of construction 2008<br/>press power main press 170 tons<br/>specific press capacity 14 kg/cm²<br/>feed channel 1,800 x 1,020 mm<br/>filling volume 2,5 cm³<br/>theoretic  throughput rate 750 m³/h<br/>bale size 1,100 x 1,100 mm<br/>driving motor 2 x 75 kw<br/>tying system 5 fold horizontal, full automatic<br/>throughput rate at a approx. 30 up to 35 tons/h, depends on material<br/>volume hydraulic oil tank 3,000 l<br/>baler dimensions built up with hopper 11,460 x 5,945 x 4,055 mm (l x w x h)<br/>machine weight baler approx. 40 tons<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER MACPRESSE
TYP 111/1
YEAR OF CONSTRUCTION 2008
PRESS POWER MAIN PRESS 170 TONS
SPECIFIC PRESS CAPACITY 14 KG/CM²
FEED CHANNEL 1,800 X 1,020 MM
FILLING VOLUME 2,5 CM³
THEORETIC THROUGHPUT RATE 750 M³/H
BALE SIZE 1,100 X 1,100 MM
DRIVING MOTOR 2 X 75 KW
TYING SYSTEM 5 FOLD HORIZONTAL, FULL AUTOMATIC
THROUGHPUT RATE AT A APPROX. 30 UP TO 35 TONS/H, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 3,000 L
BALER DIMENSIONS BUILT UP WITH HOPPER 11,460 X 5,945 X 4,055 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 40 TONS

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

in or off-line machine especially suited to splitting of perfect bound books when in double production format. comprising; 
infeed conveyors including telescopic unit 
magazine hopper capable of accepting books from a flow line or by manual loading 
automatic feeding of horizontally stacked books 
precise centring of books with adjustable guide rails 
control panel. 
straight delivery conveyor. 
available immediately 
good condition
inspection welcomed
full and complete WE ARE PLEASED TO OFFER: IN OR OFF-LINE MACHINE ESPECIALLY SUITED TO SPLITTING OF PERFECT BOUND BOOKS WHEN IN DOUBLE PRODUCTION FORMAT. COMPRISING; INFEED CONVEYORS INCLUDING TELESCOPIC UNIT MAGAZINE HOPPER CAPABLE OF ACCEPTING BOOKS FROM A FLOW LINE OR BY MANUAL LOADING AUTOMATIC FEEDING OF HORIZONTALLY STACKED BOOKS PRECISE CENTRING OF BOOKS WITH ADJUSTABLE GUIDE RAILS CONTROL PANEL. STRAIGHT DELIVERY CONVEYOR. AVAILABLE IMMEDIATELY GOOD CONDITION INSPECTION WELCOMED FULL AND COMPLETE
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2014<br/>hours of operation 6,518 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories :<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider. to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 6,518 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2014
HOURS OF OPERATION 6,518 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES :
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 6,518 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-muller lagenfeld laconda model 631 year 1990 
-horizontal collator with 7 stations 
-flat pile feeder, high pile, sizes 10x14 to 35x50 cms. 
-double automatic feed check, double manual feeding station, preselection counter 
-jogging table, compressors stiching & folding unit (with front-cut) type 91 year 1991, with four deluxe g5 heads MULLER LAGENFELD LACONDA MODEL 631 YEAR 1990 -HORIZONTAL COLLATOR WITH 7 STATIONS -FLAT PILE FEEDER, HIGH PILE, SIZES 10X14 TO 35X50 CMS. -DOUBLE AUTOMATIC FEED CHECK, DOUBLE MANUAL FEEDING STATION, PRESELECTION COUNTER -JOGGING TABLE, COMPRESSORS STICHING & FOLDING UNIT (WITH FRONT-CUT) TYPE 91 YEAR 1991, WITH FOUR DELUXE G5 HEADS
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer paal<br/>typ konti 275 e/k<br/>year of construction 2007<br/>hours of operation approx. 8,000 hours<br/>press power main press 80 tons at 300 bar<br/>specific press capacity 9,7 kg/cm²<br/>feed channel 1,600 x 1.020 mm (l x w)<br/>throughput capacity under operating conditions 350 m³/hour<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 75 kw<br/>connected load 99 kw<br/>rated current 180 a<br/>tying system 4-fold vertical, 3-fold horizontal, fully automatic<br/>bale weight up to 750 kg, depends on material<br/>volume hydraulic oil tank 2,100 l<br/>sps controller (manuf., type) siemens simatic s7-300<br/>operating panel (manuf., type) siemens multi panel<br/>transport dimensions only baler 11,152 x 2,152 x 3,000 mm (l x w x h)<br/>machine weight baler approx. 21 tons<br/><br/>condition of the baler:<br/>the press is currently in operation until the 17th calendar week and will then be replaced by a new press. with only approx. 8.000 operating hours the machine is in a really good condition and ready for immediate use.<br/><br/>scope of delivery:<br/>baling press, wire drawing stations (without wire), bale chute and machine documentation. the conveyor belt is not for sale and is therefore not included in the scope of delivery.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available. dismantling and loading is the responsibility of the buyer. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER PAAL
TYP KONTI 275 E/K
YEAR OF CONSTRUCTION 2007
HOURS OF OPERATION APPROX. 8,000 HOURS
PRESS POWER MAIN PRESS 80 TONS AT 300 BAR
SPECIFIC PRESS CAPACITY 9,7 KG/CM²
FEED CHANNEL 1,600 X 1.020 MM (L X W)
THROUGHPUT CAPACITY UNDER OPERATING CONDITIONS 350 M³/HOUR
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 75 KW
CONNECTED LOAD 99 KW
RATED CURRENT 180 A
TYING SYSTEM 4-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATIC
BALE WEIGHT UP TO 750 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 2,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7-300
OPERATING PANEL (MANUF., TYPE) SIEMENS MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,152 X 2,152 X 3,000 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 21 TONS

CONDITION OF THE BALER:
THE PRESS IS CURRENTLY IN OPERATION UNTIL THE 17TH CALENDAR WEEK AND WILL THEN BE REPLACED BY A NEW PRESS. WITH ONLY APPROX. 8.000 OPERATING HOURS THE MACHINE IS IN A REALLY GOOD CONDITION AND READY FOR IMMEDIATE USE.

SCOPE OF DELIVERY:
BALING PRESS, WIRE DRAWING STATIONS (WITHOUT WIRE), BALE CHUTE AND MACHINE DOCUMENTATION. THE CONVEYOR BELT IS NOT FOR SALE AND IS THEREFORE NOT INCLUDED IN THE SCOPE OF DELIVERY.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. DISMANTLING AND LOADING IS THE RESPONSIBILITY OF THE BUYER. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand extrusion press line
mfc.:	clecim, rexroth, oilgear, eri, omav, auburtin	
type:	horizontal front loading press
built:	1986		continuously modernised!	stopped production in 2009
force:	3000 mt		pressure:	300 bar
billet dia.:	9.5” can be modified to 9”	billet length:	540 – 1080 mm
automation	plc siemens s7-400 cpu to control press and furnace
plc siemens s5-135 cpu to control profile exit table and traction bench plc pb400 merlin to control roller table, cold saw, stacker, spacer feeder.
scope of supply:	feeding system	billet furnace		hot shear
	extrusion press	run-out table		double puller		hot saw
	stretcher 	finishing saw           stacker
  QTY. 1 SECOND-HAND EXTRUSION PRESS LINE MFC.: CLECIM, REXROTH, OILGEAR, ERI, OMAV, AUBURTIN TYPE: HORIZONTAL FRONT LOADING PRESS BUILT: 1986 CONTINUOUSLY MODERNISED! STOPPED PRODUCTION IN 2009 FORCE: 3000 MT PRESSURE: 300 BAR BILLET DIA.: 9.5” CAN BE MODIFIED TO 9” BILLET LENGTH: 540 – 1080 MM AUTOMATION PLC SIEMENS S7-400 CPU TO CONTROL PRESS AND FURNACE PLC SIEMENS S5-135 CPU TO CONTROL PROFILE EXIT TABLE AND TRACTION BENCH PLC PB400 MERLIN TO CONTROL ROLLER TABLE, COLD SAW, STACKER, SPACER FEEDER. SCOPE OF SUPPLY: FEEDING SYSTEM BILLET FURNACE HOT SHEAR EXTRUSION PRESS RUN-OUT TABLE DOUBLE PULLER HOT SAW STRETCHER FINISHING SAW STACKER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: 29.500 €
Ubicación: Land-manufacturer paal<br/>typ konti 600 d/k<br/>year of contruction  2001<br/>press power main press 145 tons<br/>feeding volume 3,45 cbm<br/>feed channel 2,000 x 1,020 mm (l x w) <br/>bale size  1,080 x 1,100 mm<br/>driving motor 3 x 45 kw<br/>connected load 171 kw / 320 a<br/>tying system 5-fold vertical, 4-fold horizontal, fully automated<br/>throughput rates under operating conditions 540 cbm/h<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 16,5 tons/h<br/>bulk weight of 50 kg/cbm approx. 27 tons/h<br/>bulk weight of 100 kg/cbm approx. 40 tons/h<br/>bale weight 800 up to 1,250 kg<br/>volume oil tank 3,100 l<br/>plc system siemens s7 300<br/>transport dimensions  approx. 14,365 x 2,600 x 3,640 mm (l x w x h)<br/>machine weight approx. 32 tons<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 600 D/K
YEAR OF CONTRUCTION 2001
PRESS POWER MAIN PRESS 145 TONS
FEEDING VOLUME 3,45 CBM
FEED CHANNEL 2,000 X 1,020 MM (L X W)
BALE SIZE 1,080 X 1,100 MM
DRIVING MOTOR 3 X 45 KW
CONNECTED LOAD 171 KW / 320 A
TYING SYSTEM 5-FOLD VERTICAL, 4-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATES UNDER OPERATING CONDITIONS 540 CBM/H
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 16,5 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 27 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 40 TONS/H
BALE WEIGHT 800 UP TO 1,250 KG
VOLUME OIL TANK 3,100 L
PLC SYSTEM SIEMENS S7 300
TRANSPORT DIMENSIONS APPROX. 14,365 X 2,600 X 3,640 MM (L X W X H)
MACHINE WEIGHT APPROX. 32 TONS

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-code: 0572
brand: biesse
model: rover 18

cnc working center with 3 controlled axis

technical data:
working range x axis  mm  2310 mm - y axis  mm 710  -   stroke  z axis   mm 90  
n ° 6 worktables
boring unit composed of  n° 12 vertical spindles - n° 4 horizontal spindles - motor power  hp 2,3
router hp 7,5 - max speed 24.000 rpm
disc cutter diameter 120 - motor hp 2,3
vacuum pump
working pressure 6 bar
overall dimensions machine:  mm 3700 x 1400 x 1600 h
overall dimensions electrical panel: mm 800 x 650 x 2000 h
machine weight 2300 kg



  CODE: 0572 BRAND: BIESSE MODEL: ROVER 18 CNC WORKING CENTER WITH 3 CONTROLLED AXIS TECHNICAL DATA: WORKING RANGE X AXIS MM 2310 MM - Y AXIS MM 710 - STROKE Z AXIS MM 90 N ° 6 WORKTABLES BORING UNIT COMPOSED OF N° 12 VERTICAL SPINDLES - N° 4 HORIZONTAL SPINDLES - MOTOR POWER HP 2,3 ROUTER HP 7,5 - MAX SPEED 24.000 RPM DISC CUTTER DIAMETER 120 - MOTOR HP 2,3 VACUUM PUMP WORKING PRESSURE 6 BAR OVERALL DIMENSIONS MACHINE: MM 3700 X 1400 X 1600 H OVERALL DIMENSIONS ELECTRICAL PANEL: MM 800 X 650 X 2000 H MACHINE WEIGHT 2300 KG
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-manufacturer paal<br/>typ konti 700 f/k<br/>year of construction 2009<br/>hours of operation approx. 44.000 h<br/>press power main press 170 tons<br/>specific press capacity 14 kg/cm²<br/>feed channel 2,000 x 1,020 mm (l x w)<br/>capacity per cycle time 3,45 cbm<br/>throughput rate under operating conditions 650 cbm/h<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 3 x 75 kw<br/>connected load 255 kw<br/>tying system 5 fold vertical, 4 fold horizontal, fully automated<br/>throughput rate  <br/>bulk weight of 30 kg/cbm approx. 16 tons/h<br/>bulk weight of 50 kg/cbm approx. 26 tons/h<br/>bulk weight of 100 kg/cbm approx. 39 tons/h<br/>throughput rate with ruffler approx. 20 tons/h<br/>bale weight 650 up to 950 kg<br/>baler dimensions built up with hopper approx. 14,365 x 2,600 x 5,760 mm (l x w x h)<br/>transport dimensions only baler approx. 14,365 x 2,600 x 3,640 mm (l x w x h)<br/>machine weight baler 47 tons<br/>accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.) chain belt conveyor<br/>comments inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER PAAL
TYP KONTI 700 F/K
YEAR OF CONSTRUCTION 2009
HOURS OF OPERATION APPROX. 44.000 H
PRESS POWER MAIN PRESS 170 TONS
SPECIFIC PRESS CAPACITY 14 KG/CM²
FEED CHANNEL 2,000 X 1,020 MM (L X W)
CAPACITY PER CYCLE TIME 3,45 CBM
THROUGHPUT RATE UNDER OPERATING CONDITIONS 650 CBM/H
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 3 X 75 KW
CONNECTED LOAD 255 KW
TYING SYSTEM 5 FOLD VERTICAL, 4 FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE
BULK WEIGHT OF 30 KG/CBM APPROX. 16 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 26 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 39 TONS/H
THROUGHPUT RATE WITH RUFFLER APPROX. 20 TONS/H
BALE WEIGHT 650 UP TO 950 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 14,365 X 2,600 X 5,760 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 14,365 X 2,600 X 3,640 MM (L X W X H)
MACHINE WEIGHT BALER 47 TONS
ACCESSORIES (RUFFLER, PRE-COMPRESSOR, PERFORATOR, CONVEYOR BELT, ETC.) CHAIN BELT CONVEYOR
COMMENTS INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-2006
control siemens sinumerik 810 d
swing diameter 220 mm
turning length 480 mm
diameter on the cross slide max. 290 mm
max. part weight of about 25 kg
distance between spindles 720 mm
main spindle:
max. speed ??6,300 rpm / -1
main spindle power 10 kw
max. torque 53 nm
head spindle din 55026 / kk4
bearing diameter 70 mm
spindle bore 32.5 mm
diameter max bar. 32 mm
max. 220 mm diameter mandrel
axis 0,01 ° c
counter:
max. speed ??6,300 rpm / -1
drive power - 10 kw counter
max. torque 45 nm
head spindle din 55026 / kk4
bearing diameter 70 mm
max. core diameter 200 mm
axis 0,01 ° c
travel:
axis x: 160 / z: 510 mm
number of turrets: 2
number of tool stations 12 pos.
number of driven tool stations 12 pos.
speed ??range max. 6,000 min -1
drive power - 5 kw
max. torque 12 nm
tool holders vdi 25 din 69880
tool square 16 x 16 mm
advancement 0-24000 mm / min
fast x traversa: 20 / z: 24 m / min
c axis rapid 100 min / -1
force feed x: 4 / z: 4 kn
total power required 25 kva
complete documentation
cooling system
chip conveyor
axis 0,01 ° c
interface for bar feeder iemca boss 332 e 2006 CONTROL SIEMENS SINUMERIK 810 D SWING DIAMETER 220 MM TURNING LENGTH 480 MM DIAMETER ON THE CROSS SLIDE MAX. 290 MM MAX. PART WEIGHT OF ABOUT 25 KG DISTANCE BETWEEN SPINDLES 720 MM MAIN SPINDLE: MAX. SPEED ??6,300 RPM / -1 MAIN SPINDLE POWER 10 KW MAX. TORQUE 53 NM HEAD SPINDLE DIN 55026 / KK4 BEARING DIAMETER 70 MM SPINDLE BORE 32.5 MM DIAMETER MAX BAR. 32 MM MAX. 220 MM DIAMETER MANDREL AXIS 0,01 ° C COUNTER: MAX. SPEED ??6,300 RPM / -1 DRIVE POWER - 10 KW COUNTER MAX. TORQUE 45 NM HEAD SPINDLE DIN 55026 / KK4 BEARING DIAMETER 70 MM MAX. CORE DIAMETER 200 MM AXIS 0,01 ° C TRAVEL: AXIS X: 160 / Z: 510 MM NUMBER OF TURRETS: 2 NUMBER OF TOOL STATIONS 12 POS. NUMBER OF DRIVEN TOOL STATIONS 12 POS. SPEED ??RANGE MAX. 6,000 MIN -1 DRIVE POWER - 5 KW MAX. TORQUE 12 NM TOOL HOLDERS VDI 25 DIN 69880 TOOL SQUARE 16 X 16 MM ADVANCEMENT 0-24000 MM / MIN FAST X TRAVERSA: 20 / Z: 24 M / MIN C AXIS RAPID 100 MIN / -1 FORCE FEED X: 4 / Z: 4 KN TOTAL POWER REQUIRED 25 KVA COMPLETE DOCUMENTATION COOLING SYSTEM CHIP CONVEYOR AXIS 0,01 ° C INTERFACE FOR BAR FEEDER IEMCA BOSS 332 E
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-manufacturer boa<br/>typ impress d130-110-b-5/5-1.6<br/>year of construction 2009<br/>hours of operation 15,576  hours<br/>press power main press 127 tons<br/>specific press capacity 10,5 kg/cm²<br/>working pressure 280 bar<br/>feed channel 1,620 x 1,000 mm (l x w)<br/>press volume / cycle 4,1 cbm<br/>throughput rate under operating conditions up to 865 cbm/h<br/>cycle time under operating conditions 22 sec.<br/>press stroke 2,900 mm<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 2 x 55 kw<br/>connected load 132 kw<br/>tying system 5-fold vertical, 5-fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 17 tons/h<br/>bulk weight of 50 kg/cbm approx. 29 tons/h<br/>bulk weight of 100 kg/cbm approx. 37 tons/h<br/>bulk weight of 150 kg/cbm approx. 51 tons/h<br/>bale weight until 1,200 kg<br/>volume hydraulic oil tank 2,100 l<br/>sps controller (manuf., type) siemens s 7<br/>operating panel (manuf., type) siemens toughscreen<br/>baler dimensions built up with hopper approx. 11,310 x 2,759 x 6,913 mm (l x w x h)<br/>machine weight baler approx. 50 tons<br/>comments: the machine can be inspected after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOA
TYP IMPRESS D130-110-B-5/5-1.6
YEAR OF CONSTRUCTION 2009
HOURS OF OPERATION 15,576 HOURS
PRESS POWER MAIN PRESS 127 TONS
SPECIFIC PRESS CAPACITY 10,5 KG/CM²
WORKING PRESSURE 280 BAR
FEED CHANNEL 1,620 X 1,000 MM (L X W)
PRESS VOLUME / CYCLE 4,1 CBM
THROUGHPUT RATE UNDER OPERATING CONDITIONS UP TO 865 CBM/H
CYCLE TIME UNDER OPERATING CONDITIONS 22 SEC.
PRESS STROKE 2,900 MM
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 55 KW
CONNECTED LOAD 132 KW
TYING SYSTEM 5-FOLD VERTICAL, 5-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 17 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 29 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 37 TONS/H
BULK WEIGHT OF 150 KG/CBM APPROX. 51 TONS/H
BALE WEIGHT UNTIL 1,200 KG
VOLUME HYDRAULIC OIL TANK 2,100 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S 7
OPERATING PANEL (MANUF., TYPE) SIEMENS TOUGHSCREEN
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 11,310 X 2,759 X 6,913 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 50 TONS
COMMENTS: THE MACHINE CAN BE INSPECTED AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-maximum turning diameter 560 mm
maximum turning length 978 mm
step 116.5 mm bar
x-axis 357 mm
z axis 1105 mm
tours 2000
spindle line asa 11
c axis
turret 12 driven tools
2001
cnc fanuc 18i-t
mechanical gearbox range
presetting
evacuator chips MAXIMUM TURNING DIAMETER 560 MM MAXIMUM TURNING LENGTH 978 MM STEP 116.5 MM BAR X-AXIS 357 MM Z AXIS 1105 MM TOURS 2000 SPINDLE LINE ASA 11 C AXIS TURRET 12 DRIVEN TOOLS 2001 CNC FANUC 18I-T MECHANICAL GEARBOX RANGE PRESETTING EVACUATOR CHIPS
Vendedor: Industrialbay
Año de construcción: usado
Precio: 22.500 €
Ubicación: Land-manufacturer lindemann<br/>typ bimax 12/110 k<br/>year of construction 1993<br/>hours of operation 34.887 h<br/>press power main press 120 tons<br/>press power free stamper 24 tons<br/>specific press capacity 9,91 kg/cm²<br/>feed channel 2,000 / 1,400 x 1,040 mm (l x w)<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 3 x 45 kw<br/>tying system 5-fold vertical, 3-fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 10 up tp 12 tons/h<br/>bulk weight of 50 kg/cbm approx. 18 up to 26 tons/h<br/>bulk weight of 100 kg/cbm approx. 28 up to 40 tons/h<br/>bale weight 650 up to 950 kg<br/>volume hydraulic oil tank 2,500 l<br/>transport dimensions only baler approx. 11,800 x 2,400 x 3,550 mm (l x w x h)<br/>machine weight baler 35 tons<br/>accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.)  ruffler, 15 kw<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER LINDEMANN
TYP BIMAX 12/110 K
YEAR OF CONSTRUCTION 1993
HOURS OF OPERATION 34.887 H
PRESS POWER MAIN PRESS 120 TONS
PRESS POWER FREE STAMPER 24 TONS
SPECIFIC PRESS CAPACITY 9,91 KG/CM²
FEED CHANNEL 2,000 / 1,400 X 1,040 MM (L X W)
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 3 X 45 KW
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 10 UP TP 12 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 18 UP TO 26 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 28 UP TO 40 TONS/H
BALE WEIGHT 650 UP TO 950 KG
VOLUME HYDRAULIC OIL TANK 2,500 L
TRANSPORT DIMENSIONS ONLY BALER APPROX. 11,800 X 2,400 X 3,550 MM (L X W X H)
MACHINE WEIGHT BALER 35 TONS
ACCESSORIES (RUFFLER, PRE-COMPRESSOR, PERFORATOR, CONVEYOR BELT, ETC.) RUFFLER, 15 KW

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-model:           horizon bq 470 eva hotmelt
age:               2014
counter:        ca. 1,35 mio.    
paper size: max: 320 x 320 mm; min: 105 x 145 mm
envelope format: max. 660 x 320mm; min. 225x135mm
book thickness: 1mm - 65mm
envelope strength: 80-300 gsm
cover stack height: max. 150 mm 
location: germany
available: 4 - 2019
equipment: 4-clamp perfect binder, cover feeder with suction air, hotmelt back and sides  glue unit, horizon touch & work, with automatic setting gauge for book thickness measurement, timer for glue pot

  MODEL: HORIZON BQ 470 EVA HOTMELT AGE: 2014 COUNTER: CA. 1,35 MIO. PAPER SIZE: MAX: 320 X 320 MM; MIN: 105 X 145 MM ENVELOPE FORMAT: MAX. 660 X 320MM; MIN. 225X135MM BOOK THICKNESS: 1MM - 65MM ENVELOPE STRENGTH: 80-300 GSM COVER STACK HEIGHT: MAX. 150 MM LOCATION: GERMANY AVAILABLE: 4 - 2019 EQUIPMENT: 4-CLAMP PERFECT BINDER, COVER FEEDER WITH SUCTION AIR, HOTMELT BACK AND SIDES GLUE UNIT, HORIZON TOUCH & WORK, WITH AUTOMATIC SETTING GAUGE FOR BOOK THICKNESS MEASUREMENT, TIMER FOR GLUE POT
Vendedor: Graphischer Maschinenhandel
Año de construcción: usado
Precio: 17.900 €
Ubicación: Land-manufacturer boa<br/>typ 181.(6).r.p.<br/>year of construction 1994<br/>press power main press  78,5 to<br/>press power of pre-press 1 und 2  41,7 / 47,2 tons<br/>feed channel 1,620 x 1,080  mm (l x w)<br/>capacity per cycle time 2,5 cbm<br/>bale size 1,100 x 800 mm (w x h) length adjustable<br/>driving motor 55 kw<br/>connected load 70 kw<br/>tying system 4-fold vertical, 2-fold horizontal, fully automated<br/>bale weight approx. 500 up to 600 kg<br/><br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOA
TYP 181.(6).R.P.
YEAR OF CONSTRUCTION 1994
PRESS POWER MAIN PRESS 78,5 TO
PRESS POWER OF PRE-PRESS 1 UND 2 41,7 / 47,2 TONS
FEED CHANNEL 1,620 X 1,080 MM (L X W)
CAPACITY PER CYCLE TIME 2,5 CBM
BALE SIZE 1,100 X 800 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 55 KW
CONNECTED LOAD 70 KW
TYING SYSTEM 4-FOLD VERTICAL, 2-FOLD HORIZONTAL, FULLY AUTOMATED
BALE WEIGHT APPROX. 500 UP TO 600 KG

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land--booklet making system horizon vac-100 a-spf 20-fc 20 
-year 2004 - 3,9 mil. copies
-collator vac-100 a with 10 stations 
-stitching and folding spf-20 
-frontcutter ( trimmer ) fc-20 
-standard delivery- jogger 
-size max: 350 x 500 mm 
-size min: 120 x 148 mm 
-collating speed: up to 9.500 sh/hour 
-machine dimensions: 800x950x1960 mms. 
-max block thickness: 55 mms. - paper from 40 to 280 grms/sqm. 
-air feeder, computerized setup, digital counter, double sheet control, speed variator 
-damages free,all manuals and accessories, available immediately
  -BOOKLET MAKING SYSTEM HORIZON VAC-100 A-SPF 20-FC 20 -YEAR 2004 - 3,9 MIL. COPIES -COLLATOR VAC-100 A WITH 10 STATIONS -STITCHING AND FOLDING SPF-20 -FRONTCUTTER ( TRIMMER ) FC-20 -STANDARD DELIVERY- JOGGER -SIZE MAX: 350 X 500 MM -SIZE MIN: 120 X 148 MM -COLLATING SPEED: UP TO 9.500 SH/HOUR -MACHINE DIMENSIONS: 800X950X1960 MMS. -MAX BLOCK THICKNESS: 55 MMS. - PAPER FROM 40 TO 280 GRMS/SQM. -AIR FEEDER, COMPUTERIZED SETUP, DIGITAL COUNTER, DOUBLE SHEET CONTROL, SPEED VARIATOR -DAMAGES FREE,ALL MANUALS AND ACCESSORIES, AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Precio: 58.800 €
Ubicación: Land-; power [ps]: 336; front tyre size: 800/65-32; rear tyre size: 18.4-26; rear tyres remaining: 30; front tyres remaining: 80; accessories: automatischer mähbalkenheber, betriebsstunden:2163, motorhersteller:john deere, bordcomputer / monitor, beleuchtung/warntafeln, durchsatzkontrolle, häcksler, haspelhorizontalverstellung, hydrostatischer antrieb, kabine, pendelausgleich, reversiereinrichtu; working width [cm]: 750 ; POWER [PS]: 336; FRONT TYRE SIZE: 800/65-32; REAR TYRE SIZE: 18.4-26; REAR TYRES REMAINING: 30; FRONT TYRES REMAINING: 80; ACCESSORIES: AUTOMATISCHER MäHBALKENHEBER, BETRIEBSSTUNDEN:2163, MOTORHERSTELLER:JOHN DEERE, BORDCOMPUTER / MONITOR, BELEUCHTUNG/WARNTAFELN, DURCHSATZKONTROLLE, HäCKSLER, HASPELHORIZONTALVERSTELLUNG, HYDROSTATISCHER ANTRIEB, KABINE, PENDELAUSGLEICH, REVERSIEREINRICHTU; WORKING WIDTH [CM]: 750
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-type of machine: universal milling machine,.
manufacturer: auerbach.
model: f315.
year of construction: 1992.
condition: very good,.
type of offer: used machine,
     ,.	
technical data:.
table: 1240 x 335 mm.
paths:.
x = 850 mm,. 
y = 330 mm,
z = 440 mm,.
spindle speed: 56-2800 rpm,.
spindle retainer: sk 40.
drive: 4.0 kw.
comment:.
3-axis digital display screen.
horizontal milling facility.
1 long milling arbor.
5 short sk40 tool holders.
coolant system.
operating instructions.
weight: 2000 kg,
     ,.	
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location.,.
    ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: UNIVERSAL MILLING MACHINE,. MANUFACTURER: AUERBACH. MODEL: F315. YEAR OF CONSTRUCTION: 1992. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. TABLE: 1240 X 335 MM. PATHS:. X = 850 MM,. Y = 330 MM, Z = 440 MM,. SPINDLE SPEED: 56-2800 RPM,. SPINDLE RETAINER: SK 40. DRIVE: 4.0 KW. COMMENT:. 3-AXIS DIGITAL DISPLAY SCREEN. HORIZONTAL MILLING FACILITY. 1 LONG MILLING ARBOR. 5 SHORT SK40 TOOL HOLDERS. COOLANT SYSTEM. OPERATING INSTRUCTIONS. WEIGHT: 2000 KG, ,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 300 mm<br/>y-travel: 150 mm<br/>z-travel: 300 mm<br/>table surface area: 600 x 210 mm<br/>table tiltable and swivelling +/-: 40 grad<br/>milling head -swivable +/-: 40 °<br/>tool taper: mk4 <br/>turning speed range: 60 - 1900 u/min<br/>feeds - longitudinal: 0- 475 mm/min<br/>electrics - voltage/frequency: 380/50 v/hz<br/>total power requirement: 1,90 kw<br/>weight of the machine ca.: 0,70 t<br/>machine comes with tiltable table<br/>device for horizontal milling (no arbor),<br/>several mk4 toolholders, vice. <br/><br/><br/><br/><br/> X-TRAVEL: 300 MM
Y-TRAVEL: 150 MM
Z-TRAVEL: 300 MM
TABLE SURFACE AREA: 600 X 210 MM
TABLE TILTABLE AND SWIVELLING +/-: 40 GRAD
MILLING HEAD -SWIVABLE +/-: 40 °
TOOL TAPER: MK4
TURNING SPEED RANGE: 60 - 1900 U/MIN
FEEDS - LONGITUDINAL: 0- 475 MM/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 380/50 V/HZ
TOTAL POWER REQUIREMENT: 1,90 KW
WEIGHT OF THE MACHINE CA.: 0,70 T
MACHINE COMES WITH TILTABLE TABLE
DEVICE FOR HORIZONTAL MILLING (NO ARBOR),
SEVERAL MK4 TOOLHOLDERS, VICE.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-surface grinding machine horizontal

manufacturer: elb
 type: sw 6 va 1 ha
 year of construction: 1978

bohqgp0u
 l x w x h: approx. 2500 x 2000 x 2400 mm
 weight: approx. 3500 kg
 good condition control: conventional
 range of grinding: grinding length: approx. 600 mm
 grinding width: approx. 300 mm grinding height: approx. 400 mm electric - magnetic support surface: approx. 600 x 300 mm spindle very quiet running SURFACE GRINDING MACHINE HORIZONTAL MANUFACTURER: ELB TYPE: SW 6 VA 1 HA YEAR OF CONSTRUCTION: 1978 BOHQGP0U L X W X H: APPROX. 2500 X 2000 X 2400 MM WEIGHT: APPROX. 3500 KG GOOD CONDITION CONTROL: CONVENTIONAL RANGE OF GRINDING: GRINDING LENGTH: APPROX. 600 MM GRINDING WIDTH: APPROX. 300 MM GRINDING HEIGHT: APPROX. 400 MM ELECTRIC - MAGNETIC SUPPORT SURFACE: APPROX. 600 X 300 MM SPINDLE VERY QUIET RUNNING
Vendedor: RM-Industrieservice Lager und Büro
Año de construcción: usado
Ubicación: Land-grinding length: 410 mm<br/>grinding width: 150 mm<br/>workpiece height: 300 mm<br/>table-size: 350 x 150 mm<br/>longitudinal stroke: ca. 250 mm<br/>table adjustment - longitudinal: 410 m/min<br/>cross feed: 0,02 m/min<br/>magnetic plate size: 350 x 150 mm<br/>pitch min/max: 0,02 mm<br/>total power requirement: 1,8 kw<br/>weight of the machine ca.: 0,75 t<br/>magnetical clamping plate, several grinding discs with a couple of flanges <br/><br/><br/><br/><br/> GRINDING LENGTH: 410 MM
GRINDING WIDTH: 150 MM
WORKPIECE HEIGHT: 300 MM
TABLE-SIZE: 350 X 150 MM
LONGITUDINAL STROKE: CA. 250 MM
TABLE ADJUSTMENT - LONGITUDINAL: 410 M/MIN
CROSS FEED: 0,02 M/MIN
MAGNETIC PLATE SIZE: 350 X 150 MM
PITCH MIN/MAX: 0,02 MM
TOTAL POWER REQUIREMENT: 1,8 KW
WEIGHT OF THE MACHINE CA.: 0,75 T
MAGNETICAL CLAMPING PLATE, SEVERAL GRINDING DISCS WITH A COUPLE OF FLANGES




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:

-mot 3. driven roller - hydr. delivery of the two bottom rollers + the two setup roles / lead role
-the machine is 240 n / mmâ² strength of the material / yield point horizontally or vertically can be used-
/ re max torque 25
-bending performance: - flat stock - upright 80 x 20 mm ã? 800 mm - flat 140 x 30 mm ã? 700 mm
-hea 120 ã? 1000 mm
-tubular 88.9 x 3, 2 ã? 1000 mm
-bending speed 0-5 m / min
-roll diameter 290 mm
-shaft diameter 90 mm
-drive 400 v / 9,2 kw
-with:-analogue actual value indicators
-standart bending set for flat and angle material - div. tube roller sets 28; 48.3; 
	-weight approx.						2000 kg
	-space requirement approx.		            b h 1600 x 1300 x 1400 mm    
 TECHNICAL DATA: -MOT 3. DRIVEN ROLLER - HYDR. DELIVERY OF THE TWO BOTTOM ROLLERS + THE TWO SETUP ROLES / LEAD ROLE -THE MACHINE IS 240 N / MM&ACIRC;&SUP2; STRENGTH OF THE MATERIAL / YIELD POINT HORIZONTALLY OR VERTICALLY CAN BE USED- / RE MAX TORQUE 25 -BENDING PERFORMANCE: - FLAT STOCK - UPRIGHT 80 X 20 MM &ATILDE;? 800 MM - FLAT 140 X 30 MM &ATILDE;? 700 MM -HEA 120 &ATILDE;? 1000 MM -TUBULAR 88.9 X 3, 2 &ATILDE;? 1000 MM -BENDING SPEED 0-5 M / MIN -ROLL DIAMETER 290 MM -SHAFT DIAMETER 90 MM -DRIVE 400 V / 9,2 KW -WITH:-ANALOGUE ACTUAL VALUE INDICATORS -STANDART BENDING SET FOR FLAT AND ANGLE MATERIAL - DIV. TUBE ROLLER SETS 28; 48.3; -WEIGHT APPROX. 2000 KG -SPACE REQUIREMENT APPROX. B H 1600 X 1300 X 1400 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 1 st.<br/>control: cnc <br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 1 ST.
CONTROL: CNC




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-technical data:

-faceplate horizontal + vertical motorized swivel
-load capacity 5000 kg
-projection up to middle of the clamping plates approx.			2250 mm
-face plate dimension mm
-torque chuck 7250 n/m
-torque mounting arm 13000 n/m
-rated speed clamping plate approx.				   0.9 1/min
-support arm speed approx.					   0.8 1/min
-min. height in horizontal position approx.		  650 mm
-max height in horizontal position approx.		2030 mm
-right + left rotation
-e. remote switch - welding current transmission 500 a
-drive: approx.					       400 v / 5.0 kw - space requirement approx.      	     b 1500 x h t 4000 x 3500 mm
-weight approx.					8500 kg	
 TECHNICAL DATA: -FACEPLATE HORIZONTAL + VERTICAL MOTORIZED SWIVEL -LOAD CAPACITY 5000 KG -PROJECTION UP TO MIDDLE OF THE CLAMPING PLATES APPROX. 2250 MM -FACE PLATE DIMENSION MM -TORQUE CHUCK 7250 N/M -TORQUE MOUNTING ARM 13000 N/M -RATED SPEED CLAMPING PLATE APPROX. 0.9 1/MIN -SUPPORT ARM SPEED APPROX. 0.8 1/MIN -MIN. HEIGHT IN HORIZONTAL POSITION APPROX. 650 MM -MAX HEIGHT IN HORIZONTAL POSITION APPROX. 2030 MM -RIGHT + LEFT ROTATION -E. REMOTE SWITCH - WELDING CURRENT TRANSMISSION 500 A -DRIVE: APPROX. 400 V / 5.0 KW - SPACE REQUIREMENT APPROX. B 1500 X H T 4000 X 3500 MM -WEIGHT APPROX. 8500 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 60/50 mm<br/>control: ja <br/>!! machine is still in use !!<br/><br/>window system gubisch est-h 2000<br/><br/><br/>ablängsäge<br/>----------------<br/>engine 3 kw<br/>speed: 3,000 rpm<br/>saw blade diameter: 400 mm<br/>flange diameter: 80 mm<br/>adjustment: horizontal: manual after mechanical display<br/>adjustment range: 0 - 120 mm<br/><br/>length stop<br/>----------------------<br/>length 3,250 mm, by hand<br/><br/>slot spindle<br/>-------------------<br/>engine 9.2 kw<br/>spindle speed: 4,500 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 300 mm<br/>spindle stroke vertical: 3 x 100 mm for iv 68 - iv 92<br/>tool diameter: max. 400 / min 240 mm<br/>adjustment: horizontal u. vertically in the u-hub<br/>adjustment range: vertical 210 mm under table<br/>number of tools: 3 tool sets a 100 mm<br/><br/>shortest workpieces: 320 mm + spigot<br/><br/><br/>clamping table<br/>----------------------<br/><br/>on ball guide bushes and roller guides<br/><br/>swivel range: yes, 60 degrees in both directions<br/>speeds: 0-28 m / min. infinitely variable, 4 speed ranges<br/>type of counter-timber: counter-disc for 6 tool contour contours, the<br/>be automatically controlled for the intended tool sets.<br/>handover: automatically<br/>mode of operation: individual production, frame-by-frame production and mass <br/>production possible<br/><br/>longitudinal profiling<br/>----------------------<br/><br/>1. profile spindle with synchronous dipping automatic<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>equal and counter run for tear-free refolding<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>2. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>3. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 240 mm<br/><br/>4. spindle glass bead sawing unit, horizontally above<br/>-------------------------------------------------- --------------------<br/>engine 3 kw<br/>revolutions: 3000 rpm<br/>adjustment: horizontal high-low<br/>circle diameter: 250 mm<br/>clamping flange holder: 60 mm diameter<br/>pneumatic glazing bead strip with non-return valve<br/><br/>other features<br/>-------------------------<br/>umfälzeinrichtung<br/>lubricant pump man.<br/>outfeed roller<br/>support rail, swing-out as frame support, from 500 mm to 1000 mm<br/>to fold over<br/><br/>12 inch screen control<br/><br/>option:<br/>********<br/>used window tools oppold iv 68/78 wood 13er achsmaß<br/>bore: 60/50<br/>140 drainage edge<br/>slot: zero 322<br/><br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 60/50 MM
CONTROL: JA
!! MACHINE IS STILL IN USE !!

WINDOW SYSTEM GUBISCH EST-H 2000


ABLäNGSäGE
----------------
ENGINE 3 KW
SPEED: 3,000 RPM
SAW BLADE DIAMETER: 400 MM
FLANGE DIAMETER: 80 MM
ADJUSTMENT: HORIZONTAL: MANUAL AFTER MECHANICAL DISPLAY
ADJUSTMENT RANGE: 0 - 120 MM

LENGTH STOP
----------------------
LENGTH 3,250 MM, BY HAND

SLOT SPINDLE
-------------------
ENGINE 9.2 KW
SPINDLE SPEED: 4,500 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 300 MM
SPINDLE STROKE VERTICAL: 3 X 100 MM FOR IV 68 - IV 92
TOOL DIAMETER: MAX. 400 / MIN 240 MM
ADJUSTMENT: HORIZONTAL U. VERTICALLY IN THE U-HUB
ADJUSTMENT RANGE: VERTICAL 210 MM UNDER TABLE
NUMBER OF TOOLS: 3 TOOL SETS A 100 MM

SHORTEST WORKPIECES: 320 MM + SPIGOT


CLAMPING TABLE
----------------------

ON BALL GUIDE BUSHES AND ROLLER GUIDES

SWIVEL RANGE: YES, 60 DEGREES IN BOTH DIRECTIONS
SPEEDS: 0-28 M / MIN. INFINITELY VARIABLE, 4 SPEED RANGES
TYPE OF COUNTER-TIMBER: COUNTER-DISC FOR 6 TOOL CONTOUR CONTOURS, THE
BE AUTOMATICALLY CONTROLLED FOR THE INTENDED TOOL SETS.
HANDOVER: AUTOMATICALLY
MODE OF OPERATION: INDIVIDUAL PRODUCTION, FRAME-BY-FRAME PRODUCTION AND MASS
PRODUCTION POSSIBLE

LONGITUDINAL PROFILING
----------------------

1. PROFILE SPINDLE WITH SYNCHRONOUS DIPPING AUTOMATIC
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
EQUAL AND COUNTER RUN FOR TEAR-FREE REFOLDING
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

2. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

3. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 240 MM

4. SPINDLE GLASS BEAD SAWING UNIT, HORIZONTALLY ABOVE
-------------------------------------------------- --------------------
ENGINE 3 KW
REVOLUTIONS: 3000 RPM
ADJUSTMENT: HORIZONTAL HIGH-LOW
CIRCLE DIAMETER: 250 MM
CLAMPING FLANGE HOLDER: 60 MM DIAMETER
PNEUMATIC GLAZING BEAD STRIP WITH NON-RETURN VALVE

OTHER FEATURES
-------------------------
UMFäLZEINRICHTUNG
LUBRICANT PUMP MAN.
OUTFEED ROLLER
SUPPORT RAIL, SWING-OUT AS FRAME SUPPORT, FROM 500 MM TO 1000 MM
TO FOLD OVER

12 INCH SCREEN CONTROL

OPTION:
********
USED WINDOW TOOLS OPPOLD IV 68/78 WOOD 13ER ACHSMAß
BORE: 60/50
140 DRAINAGE EDGE
SLOT: ZERO 322


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)