95 ofertas

Año de construcción: usado
Ubicación: Land-x-axis: 700 mm
y-axis: 550 mm
z-axis: 450 mm
axes speed rapidly 40m / min
speed advancing work 0-20mt / min
table 900x550 mm
maximum weight on the table 700 kg
spindle speeds 42.000rpm
spindle taper hsk 40e
rapid speed 40 m / min
installed power 28 kw
heidenhain atek hs plus X-AXIS: 700 MM Y-AXIS: 550 MM Z-AXIS: 450 MM AXES SPEED RAPIDLY 40M / MIN SPEED ADVANCING WORK 0-20MT / MIN TABLE 900X550 MM MAXIMUM WEIGHT ON THE TABLE 700 KG SPINDLE SPEEDS 42.000RPM SPINDLE TAPER HSK 40E RAPID SPEED 40 M / MIN INSTALLED POWER 28 KW HEIDENHAIN ATEK HS PLUS
Vendedor: Industrialbay
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 4 st.<br/>spindle diameter: 60/50 mm<br/>control: ja <br/>!! machine is still in use !!<br/><br/>window system gubisch est-h 2000<br/><br/><br/>ablängsäge<br/>----------------<br/>engine 3 kw<br/>speed: 3,000 rpm<br/>saw blade diameter: 400 mm<br/>flange diameter: 80 mm<br/>adjustment: horizontal: manual after mechanical display<br/>adjustment range: 0 - 120 mm<br/><br/>length stop<br/>----------------------<br/>length 3,250 mm, by hand<br/><br/>slot spindle<br/>-------------------<br/>engine 9.2 kw<br/>spindle speed: 4,500 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 300 mm<br/>spindle stroke vertical: 3 x 100 mm for iv 68 - iv 92<br/>tool diameter: max. 400 / min 240 mm<br/>adjustment: horizontal u. vertically in the u-hub<br/>adjustment range: vertical 210 mm under table<br/>number of tools: 3 tool sets a 100 mm<br/><br/>shortest workpieces: 320 mm + spigot<br/><br/><br/>clamping table<br/>----------------------<br/><br/>on ball guide bushes and roller guides<br/><br/>swivel range: yes, 60 degrees in both directions<br/>speeds: 0-28 m / min. infinitely variable, 4 speed ranges<br/>type of counter-timber: counter-disc for 6 tool contour contours, the<br/>be automatically controlled for the intended tool sets.<br/>handover: automatically<br/>mode of operation: individual production, frame-by-frame production and mass <br/>production possible<br/><br/>longitudinal profiling<br/>----------------------<br/><br/>1. profile spindle with synchronous dipping automatic<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>equal and counter run for tear-free refolding<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>2. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 100 - 240 mm<br/><br/>3. profile spindle<br/>--------------------<br/>engine 9.2 kw<br/>spindle speed 6,000 rpm<br/>spindle diameter: 50 mm<br/>spindle length: 200 mm<br/>spindle stroke vertical: 2 x 100 mm for iv 68 - iv 92<br/>circle diameter: 240 mm<br/><br/>4. spindle glass bead sawing unit, horizontally above<br/>-------------------------------------------------- --------------------<br/>engine 3 kw<br/>revolutions: 3000 rpm<br/>adjustment: horizontal high-low<br/>circle diameter: 250 mm<br/>clamping flange holder: 60 mm diameter<br/>pneumatic glazing bead strip with non-return valve<br/><br/>other features<br/>-------------------------<br/>umfälzeinrichtung<br/>lubricant pump man.<br/>outfeed roller<br/>support rail, swing-out as frame support, from 500 mm to 1000 mm<br/>to fold over<br/><br/>12 inch screen control<br/><br/>option:<br/>********<br/>used window tools oppold iv 68/78 wood 13er achsmaß<br/>bore: 60/50<br/>140 drainage edge<br/>slot: zero 322<br/><br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 60/50 MM
CONTROL: JA
!! MACHINE IS STILL IN USE !!

WINDOW SYSTEM GUBISCH EST-H 2000


ABLäNGSäGE
----------------
ENGINE 3 KW
SPEED: 3,000 RPM
SAW BLADE DIAMETER: 400 MM
FLANGE DIAMETER: 80 MM
ADJUSTMENT: HORIZONTAL: MANUAL AFTER MECHANICAL DISPLAY
ADJUSTMENT RANGE: 0 - 120 MM

LENGTH STOP
----------------------
LENGTH 3,250 MM, BY HAND

SLOT SPINDLE
-------------------
ENGINE 9.2 KW
SPINDLE SPEED: 4,500 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 300 MM
SPINDLE STROKE VERTICAL: 3 X 100 MM FOR IV 68 - IV 92
TOOL DIAMETER: MAX. 400 / MIN 240 MM
ADJUSTMENT: HORIZONTAL U. VERTICALLY IN THE U-HUB
ADJUSTMENT RANGE: VERTICAL 210 MM UNDER TABLE
NUMBER OF TOOLS: 3 TOOL SETS A 100 MM

SHORTEST WORKPIECES: 320 MM + SPIGOT


CLAMPING TABLE
----------------------

ON BALL GUIDE BUSHES AND ROLLER GUIDES

SWIVEL RANGE: YES, 60 DEGREES IN BOTH DIRECTIONS
SPEEDS: 0-28 M / MIN. INFINITELY VARIABLE, 4 SPEED RANGES
TYPE OF COUNTER-TIMBER: COUNTER-DISC FOR 6 TOOL CONTOUR CONTOURS, THE
BE AUTOMATICALLY CONTROLLED FOR THE INTENDED TOOL SETS.
HANDOVER: AUTOMATICALLY
MODE OF OPERATION: INDIVIDUAL PRODUCTION, FRAME-BY-FRAME PRODUCTION AND MASS
PRODUCTION POSSIBLE

LONGITUDINAL PROFILING
----------------------

1. PROFILE SPINDLE WITH SYNCHRONOUS DIPPING AUTOMATIC
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
EQUAL AND COUNTER RUN FOR TEAR-FREE REFOLDING
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

2. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

3. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 240 MM

4. SPINDLE GLASS BEAD SAWING UNIT, HORIZONTALLY ABOVE
-------------------------------------------------- --------------------
ENGINE 3 KW
REVOLUTIONS: 3000 RPM
ADJUSTMENT: HORIZONTAL HIGH-LOW
CIRCLE DIAMETER: 250 MM
CLAMPING FLANGE HOLDER: 60 MM DIAMETER
PNEUMATIC GLAZING BEAD STRIP WITH NON-RETURN VALVE

OTHER FEATURES
-------------------------
UMFäLZEINRICHTUNG
LUBRICANT PUMP MAN.
OUTFEED ROLLER
SUPPORT RAIL, SWING-OUT AS FRAME SUPPORT, FROM 500 MM TO 1000 MM
TO FOLD OVER

12 INCH SCREEN CONTROL

OPTION:
********
USED WINDOW TOOLS OPPOLD IV 68/78 WOOD 13ER ACHSMAß
BORE: 60/50
140 DRAINAGE EDGE
SLOT: ZERO 322


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-max. pressure: 	50 tons 	
year of production: 2001
unit pressure: 	5.2 kg/cm² 	
productivity: 	2 bale/h.
bale dimensions: 1200x800x1200 mm 	
price: 	to inquiry
 bale weight: 	ca. 500 kg 	  	 
supply: 	400 v/ 7,5 kw 	  	 

 
the machine is fully operational after service and after premium paint renovation.

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 MAX. PRESSURE: 50 TONS YEAR OF PRODUCTION: 2001 UNIT PRESSURE: 5.2 KG/CM² PRODUCTIVITY: 2 BALE/H. BALE DIMENSIONS: 1200X800X1200 MM PRICE: TO INQUIRY BALE WEIGHT: CA. 500 KG SUPPLY: 400 V/ 7,5 KW THE MACHINE IS FULLY OPERATIONAL AFTER SERVICE AND AFTER PREMIUM PAINT RENOVATION. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-sheet width: 6050 mm<br/>plate thickness: 6,0 mm<br/>down holder: 25 stück<br/>engine output: 37,5 kw<br/><br/><br/><br/><br/> SHEET WIDTH: 6050 MM
PLATE THICKNESS: 6,0 MM
DOWN HOLDER: 25 STüCK
ENGINE OUTPUT: 37,5 KW




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-horizontal 4-head welding machine santos se-hsm-40/26 compact plus with buffer station p-260-wst - diagonal and parallelfã¼ge four head welding machine
-front door welding with or without pre-assembled threshold
-welding frame combinations
-welding of large sizes of adjustable
-schweiã?maã?e of maximum 4.000 mm x 2,600 mm
-schweiã?maã?e of min. 330 mm x 320 mm
-weld seam limitation 0.2 mm â?? 2.00 mm
-welding machine with seal retainer
-operating system windows
-space: approximately 4 m x 16 m
-the machine was dismantled by the santos service properly and is ready for pick up. the correct installation of the machine can be offered. 
-price on request  HORIZONTAL 4-HEAD WELDING MACHINE SANTOS SE-HSM-40/26 COMPACT PLUS WITH BUFFER STATION P-260-WST - DIAGONAL AND PARALLELF&ATILDE;&FRAC14;GE FOUR HEAD WELDING MACHINE -FRONT DOOR WELDING WITH OR WITHOUT PRE-ASSEMBLED THRESHOLD -WELDING FRAME COMBINATIONS -WELDING OF LARGE SIZES OF ADJUSTABLE -SCHWEI&ATILDE;?MA&ATILDE;?E OF MAXIMUM 4.000 MM X 2,600 MM -SCHWEI&ATILDE;?MA&ATILDE;?E OF MIN. 330 MM X 320 MM -WELD SEAM LIMITATION 0.2 MM &ACIRC;?? 2.00 MM -WELDING MACHINE WITH SEAL RETAINER -OPERATING SYSTEM WINDOWS -SPACE: APPROXIMATELY 4 M X 16 M -THE MACHINE WAS DISMANTLED BY THE SANTOS SERVICE PROPERLY AND IS READY FOR PICK UP. THE CORRECT INSTALLATION OF THE MACHINE CAN BE OFFERED. -PRICE ON REQUEST
Vendedor: M. Hille Import & Export technischer Anlagen
Año de construcción: usado
Ubicación: Land-amtec shrinktunnel-pof-m (high speed)<br><br>shrinktunnel suitable to be combined with amtec shrink wrapper speed shrink 35m. high speed shrinking with 0-20 m/min for pof (polyolefin) film. <br><br>- specifications: max. packaging size: l(customized)xw400xh250mm | tunnel size: l1500xw500xh300mm | power: 380v, max. 16kw | machine dimensions and weight: l1800xw990xh1300mm, 650kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SHRINKTUNNEL-POF-M (HIGH SPEED)

SHRINKTUNNEL SUITABLE TO BE COMBINED WITH AMTEC SHRINK WRAPPER SPEED SHRINK 35M. HIGH SPEED SHRINKING WITH 0-20 M/MIN FOR POF (POLYOLEFIN) FILM.

- SPECIFICATIONS: MAX. PACKAGING SIZE: L(CUSTOMIZED)XW400XH250MM | TUNNEL SIZE: L1500XW500XH300MM | POWER: 380V, MAX. 16KW | MACHINE DIMENSIONS AND WEIGHT: L1800XW990XH1300MM, 650KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-cutting width: 2x15   mm 	
year of production: 	2005
productivity: 	app  35 -40 sheet (din a4, 70g/m²) 	
price: 	to inquiry
supply: 400 v/2,2 kw 	
security leve: 	din 66399
p-4/o-3/t-4/e-3/f-1 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939   CUTTING WIDTH: 2X15 MM YEAR OF PRODUCTION: 2005 PRODUCTIVITY: APP 35 -40 SHEET (DIN A4, 70G/M²) PRICE: TO INQUIRY SUPPLY: 400 V/2,2 KW SECURITY LEVE: DIN 66399 P-4/O-3/T-4/E-3/F-1 ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Precio: used machinery auction RESALE 14.000 €
Ubicación: Land-weight approx.: 5500 kg<br/>dimensions (l x w x h) approx.: 2000 x 2400 x 2450 mm<br/>description: max workpiece size ø 230 x 350 mm, table diameter 156 mm, (3-r system), maximum table weight 25 kg, displacement x / y / z 400/450/350 mm, b shaft swivel table +/- 110 °, c axis table turning 360 °, feed and rapid traverse up to 40 m / min, spindle pick-up hsk e 40, spindle speed 100-42000 rpm, 68 tool slots, heidenhain itnc 530 control WEIGHT APPROX.: 5500 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 2400 X 2450 MM
DESCRIPTION: MAX WORKPIECE SIZE ø 230 X 350 MM, TABLE DIAMETER 156 MM, (3-R SYSTEM), MAXIMUM TABLE WEIGHT 25 KG, DISPLACEMENT X / Y / Z 400/450/350 MM, B SHAFT SWIVEL TABLE +/- 110 °, C AXIS TABLE TURNING 360 °, FEED AND RAPID TRAVERSE UP TO 40 M / MIN, SPINDLE PICK-UP HSK E 40, SPINDLE SPEED 100-42000 RPM, 68 TOOL SLOTS, HEIDENHAIN ITNC 530 CONTROL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-â?¢ manufacturer: hsm
â?¢ type: 75 vl
â?¢ length: 1.10 m
â?¢ width: 0,85 m
â?¢ height: 2.20 m
â?¢ pressure: 9 to.
â?¢ year of construction: 1998
â?¢ with rust stains, see photo
â?¢ missing 2 rolls
&ACIRC;?&CENT; MANUFACTURER: HSM &ACIRC;?&CENT; TYPE: 75 VL &ACIRC;?&CENT; LENGTH: 1.10 M &ACIRC;?&CENT; WIDTH: 0,85 M &ACIRC;?&CENT; HEIGHT: 2.20 M &ACIRC;?&CENT; PRESSURE: 9 TO. &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 1998 &ACIRC;?&CENT; WITH RUST STAINS, SEE PHOTO &ACIRC;?&CENT; MISSING 2 ROLLS
Vendedor: USEDmarket GmbH
Año de construcción: usado
Ubicación: Land-manufacturer hsm<br/>type vk 4012<br/>year of construction 2003<br/>hours of operation 18,158 hours<br/>quantity of pressed bales 71,479 bales<br/>press power main press 45 tons<br/>specific press capacity 69,4 n/cm²<br/>feed channel 820 x 1,250 mm (w x l)<br/>capacity per cycle time 0,81 m³<br/>theoretic cycle time 17 sec.<br/>theoretic  throughput rate 174 m³/h<br/>bale size 900 x 720 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 15 kw<br/>connected load 18 kw, 500 v, 50 hz, 30 a<br/>tying system 3-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3,5 tons/h<br/>bulk weight of 50 kg/cbm up to 8,7 tons/h<br/>bale weight up to 400 kg/bale, depends on material<br/>volume hydraulic oil tank 300 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic hmi<br/>transport dimensions only baler 6,180 x 2,250 x 2,350 mm (l x w x h)<br/>machine weight baler approx. 7 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 4012
YEAR OF CONSTRUCTION 2003
HOURS OF OPERATION 18,158 HOURS
QUANTITY OF PRESSED BALES 71,479 BALES
PRESS POWER MAIN PRESS 45 TONS
SPECIFIC PRESS CAPACITY 69,4 N/CM²
FEED CHANNEL 820 X 1,250 MM (W X L)
CAPACITY PER CYCLE TIME 0,81 M³
THEORETIC CYCLE TIME 17 SEC.
THEORETIC THROUGHPUT RATE 174 M³/H
BALE SIZE 900 X 720 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 15 KW
CONNECTED LOAD 18 KW, 500 V, 50 HZ, 30 A
TYING SYSTEM 3-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3,5 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 8,7 TONS/H
BALE WEIGHT UP TO 400 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 300 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC HMI
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 2,350 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 7 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-
Vendedor: HORST WOLFF Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-manufacturer hsm<br/>type vk 75 / 1600<br/>year of construction 1998<br/>hours of operation 54,412 hours<br/>press power main press 75 tons<br/>specific press capacity 99,2 n/cm²<br/>feed channel 720 x 1,600 mm (w x l)<br/>capacity per cycle time 1,21 m³<br/>theoretic cycle time 14,4 sec.<br/>theoretic  throughput rate 339 m³/h<br/>bale size 720 x 1,050 x 600 up to 1,200 mm (w x h x l)<br/>driving motor 55 kw, 500v, 50 hz, 79 a<br/>connected load 64 kw, 500 v, 98 a<br/>tying system 5-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 6,8 tons/h<br/>bulk weight of 50 kg/cbm up to 16,9 tons/h<br/>bale weight up to 620 kg/bale, depends on material<br/>volume hydraulic oil tank 1,250 l<br/>sps controller (manuf., type) siemens simatic s7 300<br/>operating panel (manuf., type)  siemens simatic multi panel<br/>transport dimensions only baler 6,180 x 2,250 x 3,260 mm (l x w x h)<br/>machine weight baler approx. 15,5 tons<br/>condition of the baler:<br/>the machine is in good condition, has been regularly serviced and is ready for immediate use.<br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER HSM
TYPE VK 75 / 1600
YEAR OF CONSTRUCTION 1998
HOURS OF OPERATION 54,412 HOURS
PRESS POWER MAIN PRESS 75 TONS
SPECIFIC PRESS CAPACITY 99,2 N/CM²
FEED CHANNEL 720 X 1,600 MM (W X L)
CAPACITY PER CYCLE TIME 1,21 M³
THEORETIC CYCLE TIME 14,4 SEC.
THEORETIC THROUGHPUT RATE 339 M³/H
BALE SIZE 720 X 1,050 X 600 UP TO 1,200 MM (W X H X L)
DRIVING MOTOR 55 KW, 500V, 50 HZ, 79 A
CONNECTED LOAD 64 KW, 500 V, 98 A
TYING SYSTEM 5-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 6,8 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 16,9 TONS/H
BALE WEIGHT UP TO 620 KG/BALE, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,250 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7 300
OPERATING PANEL (MANUF., TYPE) SIEMENS SIMATIC MULTI PANEL
TRANSPORT DIMENSIONS ONLY BALER 6,180 X 2,250 X 3,260 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15,5 TONS
CONDITION OF THE BALER:
THE MACHINE IS IN GOOD CONDITION, HAS BEEN REGULARLY SERVICED AND IS READY FOR IMMEDIATE USE.
COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-hsm vertical baling press, type v-press 1160 eco plus, press power ca. 54 t, motor power 7,5 kw, constructed in 2005
technical specifications
manufacturer hsm gmbh & co. kg
type v-press 1160 eco plus
year of construction 2005
operation houers 8 h
press power approx. 54 t
motor power 7,5 kw
loading aperture 1195 x 650 mm
bale weights up to 550 kg (depending on material)
max. bale size 1200 x 1100 x 1200 mm (l x w x h)
hourly output in bales  1-2
press chamber size 1195 x 1100 x 1640 mm (w x d x h)
machine dimensions 1737 x 1568 x 2986 mm (w x d x h)
strapping 4-fold
machine weight approx. 2250 kg HSM VERTICAL BALING PRESS, TYPE V-PRESS 1160 ECO PLUS, PRESS POWER CA. 54 T, MOTOR POWER 7,5 KW, CONSTRUCTED IN 2005 TECHNICAL SPECIFICATIONS MANUFACTURER HSM GMBH & CO. KG TYPE V-PRESS 1160 ECO PLUS YEAR OF CONSTRUCTION 2005 OPERATION HOUERS 8 H PRESS POWER APPROX. 54 T MOTOR POWER 7,5 KW LOADING APERTURE 1195 X 650 MM BALE WEIGHTS UP TO 550 KG (DEPENDING ON MATERIAL) MAX. BALE SIZE 1200 X 1100 X 1200 MM (L X W X H) HOURLY OUTPUT IN BALES 1-2 PRESS CHAMBER SIZE 1195 X 1100 X 1640 MM (W X D X H) MACHINE DIMENSIONS 1737 X 1568 X 2986 MM (W X D X H) STRAPPING 4-FOLD MACHINE WEIGHT APPROX. 2250 KG
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2014<br/>hours of operation 6,518 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories :<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider. to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 6,518 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2014
HOURS OF OPERATION 6,518 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES :
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 6,518 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-cutting width: 3,9 x 50  mm 	
year of production: 2001
productivity: app 40 sheet (din a4, 70g/m²) 	
price: 	to inquiry
supply: 2300 v / 1.6 kw 	
security leve: 	din 66399 p-3

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939   CUTTING WIDTH: 3,9 X 50 MM YEAR OF PRODUCTION: 2001 PRODUCTIVITY: APP 40 SHEET (DIN A4, 70G/M²) PRICE: TO INQUIRY SUPPLY: 2300 V / 1.6 KW SECURITY LEVE: DIN 66399 P-3 ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2016<br/>hours of operation 1,937 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories:<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider.  to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 1,937 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2016
HOURS OF OPERATION 1,937 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES:
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 1,937 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-max. pressure: 9 tons 	
year of production: 2001
unit pressure: 	1.87 kg/cm² 	
productivity: 3 bale/h., ca. 300kg/h
bale dimensions: 800x600x700 mm 	
price: 	to inquiry
bale weight: ca. 80-120 kg 	  	 
supply: 400 v/ 2.2 kw 	  	 

 
the machine is fully operational and after service.

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939   MAX. PRESSURE: 9 TONS YEAR OF PRODUCTION: 2001 UNIT PRESSURE: 1.87 KG/CM² PRODUCTIVITY: 3 BALE/H., CA. 300KG/H BALE DIMENSIONS: 800X600X700 MM PRICE: TO INQUIRY BALE WEIGHT: CA. 80-120 KG SUPPLY: 400 V/ 2.2 KW THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-de Germany, 46325 Borken
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-max. pressure: 	16 tons 	
year of production: 	1994
unit pressure: 	2.86 kg/cm² 	
productivity: 	3 bale/h.
bale dimensions: 800x700x(800-1000) mm 	
price: 	to inquiry
bale weight: ca. 200 kg 	  	 
supply: 	400 v/7,5 kw 	  	 

 
the price includes paint renovation and all repairs necessary to deliver a fully functioning machine. 


englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  MAX. PRESSURE: 16 TONS YEAR OF PRODUCTION: 1994 UNIT PRESSURE: 2.86 KG/CM² PRODUCTIVITY: 3 BALE/H. BALE DIMENSIONS: 800X700X(800-1000) MM PRICE: TO INQUIRY BALE WEIGHT: CA. 200 KG SUPPLY: 400 V/7,5 KW THE PRICE INCLUDES PAINT RENOVATION AND ALL REPAIRS NECESSARY TO DELIVER A FULLY FUNCTIONING MACHINE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-1 mehrzweck-flächen-schleifautomat\r\nheesemann\r\ntype: hsm .3 qlkld\r\nschleifbreite 1.300 mm\r\nneumaschine\r\n\r\nständeraufbau mit transportbett\r\nmit durchgehendem transportteppich, vorschubgeschwindigkeit 3  - 15 m/min. frequenzgeregelt, konstante arbeitshöhe 880 mm, maschinenoberteil entsprechend der werkstückdicke (3 - 160 mm) motorisch verstellbar,  integrierte schaltschränke. \r\n\r\n1 andruckwalze (Ø 50 mm), pendelnd, im einlauf der maschine, inkl. Übermaßkontrolle\r\n\r\n1 industrie-pc 7\r\n7-zoll-tft color-display, 800 x 480 punktauflösung, 512 mb micro-sd-flash-karte, betriebssystem windows embedded compact 7, touch-screen-ausführung, anzeige produktions- und stillstandzeiten. ethernet-anschluss möglich. mit programmspeicher für 100 programme, werte für motorgeschwindigkeiten, schleifbeginn, schleifende, schleifkantenintensität und schleifdruck werden gespeichert und nach wahl des programms automatisch eingestellt. \r\n\r\n1 querschleifaggregat\r\nschleifbandabmessungen:4.800 x 150 mm\r\nbandgeschwindigkeit:2,0 - 20 m/s\r\nantriebsleistung:15 kw frequenzumformer\r\nstufenlose einstellung der schleifbandgeschwindigkeiten, in verbindung mit zusätzlichem rotor zur bandausblasung, verschleißfreie bremseinrichtung, drucklamellenbandsystem, bandabstrahleinrichtung werkstückabhängig gesteuert, abschaltbar.\r\n\r\n1 längsschleifaggregat\r\nschleifbandabmessungen: 2.620 x 1.350 mm\r\nbandgeschwindigkeiten: 1,8 - 18 m/s\r\nantriebsleistung: 15 kw frequenzumformer\r\nstufenlose einstellung der schleifbandgeschwindigkeiten, verschleißfreie bremseinrichtung, automatischer ausgleich von eventuell unterschiedlichen bandkantenlängen, einschl. schleifbandabstrahleinrichtung.\r\neinschl. gleich-und gegenlauf;\r\nvordere kalibrierumlenkwalze Ø98 mm, glatt, über terminal zuschaltbar. \r\n1 längsschleifaggregat mit drucklamellenbandsystem\r\nschleifbandabmessungen: 2.620 x 1.350 mm\r\nbandgeschwindigkeiten: 1,8 - 9 m/s (bis 18 m/s ohne drucklamellenband)\r\nantriebsleistung: 15 kw frequenzumformer\r\nstufenlose einstellung der schleifbandgeschwindigkeiten, verschleißfreie bremseinrichtung, automatischer ausgleich von eventuell unterschiedlichen bandkantenlängen, schleifband im gegenlauf arbeitend, exzentrisch verstellbare antriebswalzen, die es ermöglichen, das aggregat für unterschiedliche drucklamellenbanddicken sowie den einsatz des aggregates ohne drucklamellenband einzustellen. einschl. schleifbandabstrahleinrichtung.\r\n\r\n3 druckbalken mit computergesteuertem selektiv - druckregelungssystem csd® (10 jahre gewährleistung)\r\nmit stufenloser druckanpassung der einzelnen andruckelemente, für freie, mehrgleisige beschickung. abstand der steuerrollen 21 mm. werkstücktoleranzaus­gleich bis 2 mm durch wartungsfreie andruckmagnete. arbeitsbreite sowie schleifbeginn und -ende des druckbalkens werden elektronisch gesteuert. während ein werkstück durch die maschine läuft, ermöglichen die andruckelemente mittels elektrischer hubmagnete eine stufenlose regulierung der andruckkraft jedes einzelnen druckschuhs. diese innovative csd®-technologie garantiert jederzeit einen proportional gleichen druck im hinblick auf die auflagefläche des druckschuhs auf dem werkstück. durch diese stufenlose, dynamische steuerung der andruckkraft ist das risiko des durchschleifens an den kanten so gut wie ausgeschlossen. außerdem ist das elektromagnetische csd®-system wartungsfrei, da kein verschmutzen wie bei pneumatikelementen möglich ist. \r\n\r\n1 bürstenwalzenaggregat\r\nhöhenverstellbar, einschl. absaughaube\r\nbürstenbesatz: fibre\r\ndurchmesser: 120 mm\r\nantriebsleistung: 0,75 kw\r\n\r\n1 werkstücksaugspannanlage\r\nfür den sicheren transport von werkstücken kürzer als 500 mm in vorschubrichtung, einschl.  integrierter ventilator, antriebsleistung 2,2 kw \r\n\r\nenergymanagement-system ems\r\n\r\nbandauflageseite: links \r\nterminal: frontseite links \r\nbetriebsspannung: 400 volt, 50 hz\r\n\r\n\r\nbeschreibung und bilder zeigen beispielhaft die maschinenserie. tatsächliche konfiguration kann nach kundenwunsch angepasst werden.\r\n\r\n 1 MEHRZWECK-FLäCHEN-SCHLEIFAUTOMAT\R\NHEESEMANN\R\NTYPE: HSM .3 QLKLD\R\NSCHLEIFBREITE 1.300 MM\R\NNEUMASCHINE\R\N\R\NSTäNDERAUFBAU MIT TRANSPORTBETT\R\NMIT DURCHGEHENDEM TRANSPORTTEPPICH, VORSCHUBGESCHWINDIGKEIT 3 - 15 M/MIN. FREQUENZGEREGELT, KONSTANTE ARBEITSHöHE 880 MM, MASCHINENOBERTEIL ENTSPRECHEND DER WERKSTüCKDICKE (3 - 160 MM) MOTORISCH VERSTELLBAR, INTEGRIERTE SCHALTSCHRäNKE. \R\N\R\N1 ANDRUCKWALZE (Ø 50 MM), PENDELND, IM EINLAUF DER MASCHINE, INKL. ÜBERMAßKONTROLLE\R\N\R\N1 INDUSTRIE-PC 7\R\N7-ZOLL-TFT COLOR-DISPLAY, 800 X 480 PUNKTAUFLöSUNG, 512 MB MICRO-SD-FLASH-KARTE, BETRIEBSSYSTEM WINDOWS EMBEDDED COMPACT 7, TOUCH-SCREEN-AUSFüHRUNG, ANZEIGE PRODUKTIONS- UND STILLSTANDZEITEN. ETHERNET-ANSCHLUSS MöGLICH. MIT PROGRAMMSPEICHER FüR 100 PROGRAMME, WERTE FüR MOTORGESCHWINDIGKEITEN, SCHLEIFBEGINN, SCHLEIFENDE, SCHLEIFKANTENINTENSITäT UND SCHLEIFDRUCK WERDEN GESPEICHERT UND NACH WAHL DES PROGRAMMS AUTOMATISCH EINGESTELLT. \R\N\R\N1 QUERSCHLEIFAGGREGAT\R\NSCHLEIFBANDABMESSUNGEN:4.800 X 150 MM\R\NBANDGESCHWINDIGKEIT:2,0 - 20 M/S\R\NANTRIEBSLEISTUNG:15 KW FREQUENZUMFORMER\R\NSTUFENLOSE EINSTELLUNG DER SCHLEIFBANDGESCHWINDIGKEITEN, IN VERBINDUNG MIT ZUSäTZLICHEM ROTOR ZUR BANDAUSBLASUNG, VERSCHLEIßFREIE BREMSEINRICHTUNG, DRUCKLAMELLENBANDSYSTEM, BANDABSTRAHLEINRICHTUNG WERKSTüCKABHäNGIG GESTEUERT, ABSCHALTBAR.\R\N\R\N1 LäNGSSCHLEIFAGGREGAT\R\NSCHLEIFBANDABMESSUNGEN: 2.620 X 1.350 MM\R\NBANDGESCHWINDIGKEITEN: 1,8 - 18 M/S\R\NANTRIEBSLEISTUNG: 15 KW FREQUENZUMFORMER\R\NSTUFENLOSE EINSTELLUNG DER SCHLEIFBANDGESCHWINDIGKEITEN, VERSCHLEIßFREIE BREMSEINRICHTUNG, AUTOMATISCHER AUSGLEICH VON EVENTUELL UNTERSCHIEDLICHEN BANDKANTENLäNGEN, EINSCHL. SCHLEIFBANDABSTRAHLEINRICHTUNG.\R\NEINSCHL. GLEICH-UND GEGENLAUF;\R\NVORDERE KALIBRIERUMLENKWALZE Ø98 MM, GLATT, üBER TERMINAL ZUSCHALTBAR. \R\N1 LäNGSSCHLEIFAGGREGAT MIT DRUCKLAMELLENBANDSYSTEM\R\NSCHLEIFBANDABMESSUNGEN: 2.620 X 1.350 MM\R\NBANDGESCHWINDIGKEITEN: 1,8 - 9 M/S (BIS 18 M/S OHNE DRUCKLAMELLENBAND)\R\NANTRIEBSLEISTUNG: 15 KW FREQUENZUMFORMER\R\NSTUFENLOSE EINSTELLUNG DER SCHLEIFBANDGESCHWINDIGKEITEN, VERSCHLEIßFREIE BREMSEINRICHTUNG, AUTOMATISCHER AUSGLEICH VON EVENTUELL UNTERSCHIEDLICHEN BANDKANTENLäNGEN, SCHLEIFBAND IM GEGENLAUF ARBEITEND, EXZENTRISCH VERSTELLBARE ANTRIEBSWALZEN, DIE ES ERMöGLICHEN, DAS AGGREGAT FüR UNTERSCHIEDLICHE DRUCKLAMELLENBANDDICKEN SOWIE DEN EINSATZ DES AGGREGATES OHNE DRUCKLAMELLENBAND EINZUSTELLEN. EINSCHL. SCHLEIFBANDABSTRAHLEINRICHTUNG.\R\N\R\N3 DRUCKBALKEN MIT COMPUTERGESTEUERTEM SELEKTIV - DRUCKREGELUNGSSYSTEM CSD® (10 JAHRE GEWäHRLEISTUNG)\R\NMIT STUFENLOSER DRUCKANPASSUNG DER EINZELNEN ANDRUCKELEMENTE, FüR FREIE, MEHRGLEISIGE BESCHICKUNG. ABSTAND DER STEUERROLLEN 21 MM. WERKSTüCKTOLERANZAUS­GLEICH BIS 2 MM DURCH WARTUNGSFREIE ANDRUCKMAGNETE. ARBEITSBREITE SOWIE SCHLEIFBEGINN UND -ENDE DES DRUCKBALKENS WERDEN ELEKTRONISCH GESTEUERT. WäHREND EIN WERKSTüCK DURCH DIE MASCHINE LäUFT, ERMöGLICHEN DIE ANDRUCKELEMENTE MITTELS ELEKTRISCHER HUBMAGNETE EINE STUFENLOSE REGULIERUNG DER ANDRUCKKRAFT JEDES EINZELNEN DRUCKSCHUHS. DIESE INNOVATIVE CSD®-TECHNOLOGIE GARANTIERT JEDERZEIT EINEN PROPORTIONAL GLEICHEN DRUCK IM HINBLICK AUF DIE AUFLAGEFLäCHE DES DRUCKSCHUHS AUF DEM WERKSTüCK. DURCH DIESE STUFENLOSE, DYNAMISCHE STEUERUNG DER ANDRUCKKRAFT IST DAS RISIKO DES DURCHSCHLEIFENS AN DEN KANTEN SO GUT WIE AUSGESCHLOSSEN. AUßERDEM IST DAS ELEKTROMAGNETISCHE CSD®-SYSTEM WARTUNGSFREI, DA KEIN VERSCHMUTZEN WIE BEI PNEUMATIKELEMENTEN MöGLICH IST. \R\N\R\N1 BüRSTENWALZENAGGREGAT\R\NHöHENVERSTELLBAR, EINSCHL. ABSAUGHAUBE\R\NBüRSTENBESATZ: FIBRE\R\NDURCHMESSER: 120 MM\R\NANTRIEBSLEISTUNG: 0,75 KW\R\N\R\N1 WERKSTüCKSAUGSPANNANLAGE\R\NFüR DEN SICHEREN TRANSPORT VON WERKSTüCKEN KüRZER ALS 500 MM IN VORSCHUBRICHTUNG, EINSCHL. INTEGRIERTER VENTILATOR, ANTRIEBSLEISTUNG 2,2 KW \R\N\R\NENERGYMANAGEMENT-SYSTEM EMS\R\N\R\NBANDAUFLAGESEITE: LINKS \R\NTERMINAL: FRONTSEITE LINKS \R\NBETRIEBSSPANNUNG: 400 VOLT, 50 HZ\R\N\R\N\R\NBESCHREIBUNG UND BILDER ZEIGEN BEISPIELHAFT DIE MASCHINENSERIE. TATSäCHLICHE KONFIGURATION KANN NACH KUNDENWUNSCH ANGEPASST WERDEN.\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hsm 500.1 vl (no.46) vertical bale press, 7,5 kw, press power 50 t, constructed in year 2001, feed channel 1.150 x 565 mm
technical specifications
manufacturer hsm pressen, germany
type 500.1 vl
serial no. 220045550
int.-no.46
year of construction 2001
pressing power 50 t 
drive power 7,5 kw / 400 v / 50 hz
connection cee 32 a / 6h
feed channel  1.150 x 565 mm (w x h)
loading height 1.090 mm
max. bale size approx. 1.200 x 800 x 1.000 – 1.200 mm (w x d x h)
bale weight approx. 380 – 500 kg
press chamber dimensions 1.200 x 800 x 1.520 mm (w x d x h)
pressing time incl. return stroke 35 sec.
transport dimensions (with submerged cylinder) 1.824 x 1.213 x 2.300 mm (w x d x h)
external dimensions 1.824 x 1.213 x 2.987 mm (w x d x h)
weight approx. 1.995 kg HSM 500.1 VL (NO.46) VERTICAL BALE PRESS, 7,5 KW, PRESS POWER 50 T, CONSTRUCTED IN YEAR 2001, FEED CHANNEL 1.150 X 565 MM TECHNICAL SPECIFICATIONS MANUFACTURER HSM PRESSEN, GERMANY TYPE 500.1 VL SERIAL NO. 220045550 INT.-NO.46 YEAR OF CONSTRUCTION 2001 PRESSING POWER 50 T DRIVE POWER 7,5 KW / 400 V / 50 HZ CONNECTION CEE 32 A / 6H FEED CHANNEL 1.150 X 565 MM (W X H) LOADING HEIGHT 1.090 MM MAX. BALE SIZE APPROX. 1.200 X 800 X 1.000 – 1.200 MM (W X D X H) BALE WEIGHT APPROX. 380 – 500 KG PRESS CHAMBER DIMENSIONS 1.200 X 800 X 1.520 MM (W X D X H) PRESSING TIME INCL. RETURN STROKE 35 SEC. TRANSPORT DIMENSIONS (WITH SUBMERGED CYLINDER) 1.824 X 1.213 X 2.300 MM (W X D X H) EXTERNAL DIMENSIONS 1.824 X 1.213 X 2.987 MM (W X D X H) WEIGHT APPROX. 1.995 KG
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 700 mm<br/>y-travel: 550 mm<br/>z-travel: 450 mm<br/>control: 50 <br/>spindle turning speed range: 3000 - 42000 u/min<br/>weight of the machine ca.: 6,5 t<br/>dimensions of the machine ca.: 4,0 x 2,9 x 3,1 m<br/>tool taper: hsk 40 e <br/>tool change unit: 12 <br/>control: heidenhain atek hs plus<br/><br/><br/><br/><br/> X-TRAVEL: 700 MM
Y-TRAVEL: 550 MM
Z-TRAVEL: 450 MM
CONTROL: 50
SPINDLE TURNING SPEED RANGE: 3000 - 42000 U/MIN
WEIGHT OF THE MACHINE CA.: 6,5 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 2,9 X 3,1 M
TOOL TAPER: HSK 40 E
TOOL CHANGE UNIT: 12
CONTROL: HEIDENHAIN ATEK HS PLUS




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hsm 500.1 vl (no.45) vertical bale press, 7,5 kw, press power 50 t, constructed in year 2001, feed channel 1.150 x 565 mm
technical specifications
manufacturer hsm pressen, germany
type 500.1 vl
serial no. 220110154
int.-no.45
year of construction 2001
pressing power 50 t 
drive power 7,5 kw / 400 v / 50 hz
connection cee 32 a / 6h
feed channel  1.150 x 565 mm (w x h)
loading height 1.090 mm
max. bale size approx. 1.200 x 800 x 1.000 – 1.200 mm (w x d x h)
bale weight approx. 380 – 500 kg
press chamber dimensions 1.200 x 800 x 1.520 mm (w x d x h)
pressing time incl. return stroke 35 sec.
transport dimensions (with submerged cylinder) 1.824 x 1.213 x 2.300 mm (w x d x h)
external dimensions 1.824 x 1.213 x 2.987 mm (w x d x h)
weight approx. 1.995 kg HSM 500.1 VL (NO.45) VERTICAL BALE PRESS, 7,5 KW, PRESS POWER 50 T, CONSTRUCTED IN YEAR 2001, FEED CHANNEL 1.150 X 565 MM TECHNICAL SPECIFICATIONS MANUFACTURER HSM PRESSEN, GERMANY TYPE 500.1 VL SERIAL NO. 220110154 INT.-NO.45 YEAR OF CONSTRUCTION 2001 PRESSING POWER 50 T DRIVE POWER 7,5 KW / 400 V / 50 HZ CONNECTION CEE 32 A / 6H FEED CHANNEL 1.150 X 565 MM (W X H) LOADING HEIGHT 1.090 MM MAX. BALE SIZE APPROX. 1.200 X 800 X 1.000 – 1.200 MM (W X D X H) BALE WEIGHT APPROX. 380 – 500 KG PRESS CHAMBER DIMENSIONS 1.200 X 800 X 1.520 MM (W X D X H) PRESSING TIME INCL. RETURN STROKE 35 SEC. TRANSPORT DIMENSIONS (WITH SUBMERGED CYLINDER) 1.824 X 1.213 X 2.300 MM (W X D X H) EXTERNAL DIMENSIONS 1.824 X 1.213 X 2.987 MM (W X D X H) WEIGHT APPROX. 1.995 KG
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 700 mm<br/>y-travel: 550 mm<br/>z-travel: 450 mm<br/>control: heidenhain <br/>tool taper: hsk 40e <br/>surface area: 900 x 550 mm<br/>weight of the machine ca.: 6,5 t<br/><br/><br/><br/><br/> X-TRAVEL: 700 MM
Y-TRAVEL: 550 MM
Z-TRAVEL: 450 MM
CONTROL: HEIDENHAIN
TOOL TAPER: HSK 40E
SURFACE AREA: 900 X 550 MM
WEIGHT OF THE MACHINE CA.: 6,5 T




Vendedor: Hop Machines
Año de construcción: usado
Ubicación: Land-year of construction: 2000
the machine has made only about 1500 pressed bales!

manual wrapper

suitable for: paper, cardboard, foil, some plastics, as pse...

force of pressure: 80 kn

sizes of the indenting: lxwxh: 730 x 645 x 690 mm

bale weight (depending on the material) approx. 70 kg

dimensions lxwxh bales: 645x500x 505 mm

400 v / 50 hz; output: 4 kw

good condition! YEAR OF CONSTRUCTION: 2000 THE MACHINE HAS MADE ONLY ABOUT 1500 PRESSED BALES! MANUAL WRAPPER SUITABLE FOR: PAPER, CARDBOARD, FOIL, SOME PLASTICS, AS PSE... FORCE OF PRESSURE: 80 KN SIZES OF THE INDENTING: LXWXH: 730 X 645 X 690 MM BALE WEIGHT (DEPENDING ON THE MATERIAL) APPROX. 70 KG DIMENSIONS LXWXH BALES: 645X500X 505 MM 400 V / 50 HZ; OUTPUT: 4 KW GOOD CONDITION!
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-x travel:    400 mm<br/>y travel:    450 mm<br/>z travel:    350 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- number of processing axes (excl parallel axes):      3  <br/>- .. among of them simultaneous cnc axes:      3  <br/>- x-axis travel:    400 mm<br/>- y-axis travel:    450 mm<br/>- z-axis travel:    350 mm<br/>milling spindle / head:  <br/>- spindle type: vertical:        <br/>- spindle revolutions (max):  42000 /min<br/>- tool fixture: hsk a40:        <br/>tool magazine:  <br/>- number of positions:     68  <br/>electrical specifications:  <br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- total weight approx.:   6500 kg<br/>attachments:  <br/>- zero-point workholding system: yes:        <br/>- central lubrication system: yes:        <br/>- chip conveyor: yes:        <br/>- closed cabin: yes:        <br/>- european ce standards: yes:        <br/>spindle hours 1600h (changed)<br/><br/>- machine mostly only 1 shift operation<br/>- very good condition<br/><br/>domestic equipments:<br/>- steptec spindle<br/>- incl. spindle cooling<br/>- parotec clamping system (base plate)<br/>- hsk 40, 5 pieces with collets are included<br/>- incl. blum wz-survey<br/>- external cooling and minimum quantity lubrication<br/>- 3d taster<br/><br/><br/><br/><br/> X TRAVEL: 400 MM
Y TRAVEL: 450 MM
Z TRAVEL: 350 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- NUMBER OF PROCESSING AXES (EXCL PARALLEL AXES): 3
- .. AMONG OF THEM SIMULTANEOUS CNC AXES: 3
- X-AXIS TRAVEL: 400 MM
- Y-AXIS TRAVEL: 450 MM
- Z-AXIS TRAVEL: 350 MM
MILLING SPINDLE / HEAD:
- SPINDLE TYPE: VERTICAL:
- SPINDLE REVOLUTIONS (MAX): 42000 /MIN
- TOOL FIXTURE: HSK A40:
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 68
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 6500 KG
ATTACHMENTS:
- ZERO-POINT WORKHOLDING SYSTEM: YES:
- CENTRAL LUBRICATION SYSTEM: YES:
- CHIP CONVEYOR: YES:
- CLOSED CABIN: YES:
- EUROPEAN CE STANDARDS: YES:
SPINDLE HOURS 1600H (CHANGED)

- MACHINE MOSTLY ONLY 1 SHIFT OPERATION
- VERY GOOD CONDITION

DOMESTIC EQUIPMENTS:
- STEPTEC SPINDLE
- INCL. SPINDLE COOLING
- PAROTEC CLAMPING SYSTEM (BASE PLATE)
- HSK 40, 5 PIECES WITH COLLETS ARE INCLUDED
- INCL. BLUM WZ-SURVEY
- EXTERNAL COOLING AND MINIMUM QUANTITY LUBRICATION
- 3D TASTER




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-max. pressure: 9 tons 	
year of production:  1995
unit pressure: 	1.87 kg/cm² 	
productivity: 	3 bale/h., ca. 300kg/h
bale dimensions: 800x600x700 mm 	
price: 	to inquiry
bale weight: 	ca. 80-120 kg 	  	 
supply: 400 v/ 2.2 kw 	  	 

 
the machine is fully operational and after service. premium paint renovation - subcharge of 595 eur


englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939    MAX. PRESSURE: 9 TONS YEAR OF PRODUCTION: 1995 UNIT PRESSURE: 1.87 KG/CM² PRODUCTIVITY: 3 BALE/H., CA. 300KG/H BALE DIMENSIONS: 800X600X700 MM PRICE: TO INQUIRY BALE WEIGHT: CA. 80-120 KG SUPPLY: 400 V/ 2.2 KW THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. PREMIUM PAINT RENOVATION - SUBCHARGE OF 595 EUR ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-pressing force: 200kn, bale dimensions: 700x812x600-1200mm, opening dimensions: 600x620mm, bale weight: 130kg, connected load: 13.2kw, length: 5525mm, width: 2535mm, height: 2250mm, weight: 4.5t, hydraulic tubes were renewed in 2015, last inspection in 2016.  PRESSING FORCE: 200KN, BALE DIMENSIONS: 700X812X600-1200MM, OPENING DIMENSIONS: 600X620MM, BALE WEIGHT: 130KG, CONNECTED LOAD: 13.2KW, LENGTH: 5525MM, WIDTH: 2535MM, HEIGHT: 2250MM, WEIGHT: 4.5T, HYDRAULIC TUBES WERE RENEWED IN 2015, LAST INSPECTION IN 2016.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel:600 mm<br/>y-travel:600 mm<br/>z-travel:500 mm<br/>total power requirement:39 kw<br/>weight of the machine ca.:10 t<br/>dimensions of the machine ca.:25 m<br/>b-axis:+30 / -10 °<br/>c-axis:n x 360 °<br/>feed in x/y/z - axis:60/60/60 m/min<br/>spindle speed max.:42.000 u/min<br/>tool taper:hsk-e40 <br/>max. torque on the spindle:6,5 / 8,8 <br/>spindle:10 / 13,5 kw<br/>tool change unit:atc 168 <br/><br/> X-TRAVEL:600 MM
Y-TRAVEL:600 MM
Z-TRAVEL:500 MM
TOTAL POWER REQUIREMENT:39 KW
WEIGHT OF THE MACHINE CA.:10 T
DIMENSIONS OF THE MACHINE CA.:25 M
B-AXIS:+30 / -10 °
C-AXIS:N X 360 °
FEED IN X/Y/Z - AXIS:60/60/60 M/MIN
SPINDLE SPEED MAX.:42.000 U/MIN
TOOL TAPER:HSK-E40
MAX. TORQUE ON THE SPINDLE:6,5 / 8,8
SPINDLE:10 / 13,5 KW
TOOL CHANGE UNIT:ATC 168

Vendedor: VIG CNC & Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-procedures:
[x x y x z] 800 x 600 x 500 mm
 
hsc machine
number of axles: 5 control: heidenhain of itnc 530 spindle retainer: hsk e 40 spindle speed: 42000 rpm
power: 12 kw
torque: 4,20 nm
chip conveyor
b-axis: + 30 / -110 â°
c-axis: 360â°
step tec spindle
automation erowa robot px
150 x its 50 and 32 x its 148
laser measurement PROCEDURES: [X X Y X Z] 800 X 600 X 500 MM HSC MACHINE NUMBER OF AXLES: 5 CONTROL: HEIDENHAIN OF ITNC 530 SPINDLE RETAINER: HSK E 40 SPINDLE SPEED: 42000 RPM POWER: 12 KW TORQUE: 4,20 NM CHIP CONVEYOR B-AXIS: + 30 / -110 &ACIRC;&DEG; C-AXIS: 360&ACIRC;&DEG; STEP TEC SPINDLE AUTOMATION EROWA ROBOT PX 150 X ITS 50 AND 32 X ITS 148 LASER MEASUREMENT
Vendedor: Mac-Tec
Año de construcción: usado
Ubicación: Land-<br/><br/>system 3r transformer linear   transformer:  1500 mm extension    115 kg  rail length:  6,5 m gripper:   -for dynafix pallets    -for dynafix macro (wire and sink edm pallets and tool holder) pallets&tool holders: -19 pcs dynafix pallets in rack magazine and 2 with calibration ring, ball and bar(280x280)    -10 wireedm macro pallets in rotary magazine    - about 30 3r-tool holders for sinkedm in rotary magazin    -pneumatic chuck adapter dynafix-macro  gfms mikron 5 axis hsm 600 lp   tool magazine:    atc 168 tool holder:   hsk-e40 (measuring probe and a lot of tool holders) spindle:    42.000 rpm working time:   approx. 9000 h zero-point clamping system:   dynafix  cmm nikon metrology altera 10.7.6.   zero-point clamping system:   dynafix, dynafix-macro, system 3r full compatibility automation software  gfms agiecharmilles cut 200ms  workpiece height:   220 mm travel x / y / z:   350 / 220 / 220 mm max. size of workpiece lxwxh: 1000 /550 / 220 mm max. workpiece weight:  750 kg front door:   820 mm normal level above floor:  1000 mm operating hours:   15552 h generator activity:   1641 h  gfms agiecharmilles form 200 macrostandard & macrohighperformance 10pcs macro collet holders 23pcs macro pallet+holders +different kind of holders  aquaclean ac - 1.3 - 2 - rt - ld - robot  a washing machine intended for cleaning, rinsing and air-drying metal components placed on a pallet. the unit consists of an insulated cabinet with a lifting door, fixed spraying system and a rotating fixture for the pallets. the unit is automatically loaded by the robot.  all machines are in very good condition and from the year of construction 2014 and younger.  dismantling, reassembly and commissioning can be offered on demand and organized by specialists.  you can certainly understand that offers are sent exclusively to interested parties, stating the company data and a telephone number.   inspection appointments can, of course be organized on request for customer with serious interest.  if the economic situation permits, then this is certainly one of the few favorable opportunities for a leap into the future.

SYSTEM 3R TRANSFORMER LINEAR TRANSFORMER: 1500 MM EXTENSION 115 KG RAIL LENGTH: 6,5 M GRIPPER: -FOR DYNAFIX PALLETS -FOR DYNAFIX MACRO (WIRE AND SINK EDM PALLETS AND TOOL HOLDER) PALLETS&TOOL HOLDERS: -19 PCS DYNAFIX PALLETS IN RACK MAGAZINE AND 2 WITH CALIBRATION RING, BALL AND BAR(280X280) -10 WIREEDM MACRO PALLETS IN ROTARY MAGAZINE - ABOUT 30 3R-TOOL HOLDERS FOR SINKEDM IN ROTARY MAGAZIN -PNEUMATIC CHUCK ADAPTER DYNAFIX-MACRO GFMS MIKRON 5 AXIS HSM 600 LP TOOL MAGAZINE: ATC 168 TOOL HOLDER: HSK-E40 (MEASURING PROBE AND A LOT OF TOOL HOLDERS) SPINDLE: 42.000 RPM WORKING TIME: APPROX. 9000 H ZERO-POINT CLAMPING SYSTEM: DYNAFIX CMM NIKON METROLOGY ALTERA 10.7.6. ZERO-POINT CLAMPING SYSTEM: DYNAFIX, DYNAFIX-MACRO, SYSTEM 3R FULL COMPATIBILITY AUTOMATION SOFTWARE GFMS AGIECHARMILLES CUT 200MS WORKPIECE HEIGHT: 220 MM TRAVEL X / Y / Z: 350 / 220 / 220 MM MAX. SIZE OF WORKPIECE LXWXH: 1000 /550 / 220 MM MAX. WORKPIECE WEIGHT: 750 KG FRONT DOOR: 820 MM NORMAL LEVEL ABOVE FLOOR: 1000 MM OPERATING HOURS: 15552 H GENERATOR ACTIVITY: 1641 H GFMS AGIECHARMILLES FORM 200 MACROSTANDARD & MACROHIGHPERFORMANCE 10PCS MACRO COLLET HOLDERS 23PCS MACRO PALLET+HOLDERS +DIFFERENT KIND OF HOLDERS AQUACLEAN AC - 1.3 - 2 - RT - LD - ROBOT A WASHING MACHINE INTENDED FOR CLEANING, RINSING AND AIR-DRYING METAL COMPONENTS PLACED ON A PALLET. THE UNIT CONSISTS OF AN INSULATED CABINET WITH A LIFTING DOOR, FIXED SPRAYING SYSTEM AND A ROTATING FIXTURE FOR THE PALLETS. THE UNIT IS AUTOMATICALLY LOADED BY THE ROBOT. ALL MACHINES ARE IN VERY GOOD CONDITION AND FROM THE YEAR OF CONSTRUCTION 2014 AND YOUNGER. DISMANTLING, REASSEMBLY AND COMMISSIONING CAN BE OFFERED ON DEMAND AND ORGANIZED BY SPECIALISTS. YOU CAN CERTAINLY UNDERSTAND THAT OFFERS ARE SENT EXCLUSIVELY TO INTERESTED PARTIES, STATING THE COMPANY DATA AND A TELEPHONE NUMBER. INSPECTION APPOINTMENTS CAN, OF COURSE BE ORGANIZED ON REQUEST FOR CUSTOMER WITH SERIOUS INTEREST. IF THE ECONOMIC SITUATION PERMITS, THEN THIS IS CERTAINLY ONE OF THE FEW FAVORABLE OPPORTUNITIES FOR A LEAP INTO THE FUTURE.
Vendedor: VIG CNC & Werkzeugmaschinen
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-technical specification of 
hsm 30 baler

price: 8000 euro’s (net) 

technical details:
 
pressure power: 30 tonnes
engine: 11 kw
dimensions of the machine: 5410 x 2380 x 1300 mm
bale dimensions: 100 x 80 x 50-120 cm
inlet size: 160 x 80 cm
bale weight: 150 – 500 kg
weight of the machine: 3,5 tonnes
binding: 4 wires, horizontally 
full eject of produced bale

all the systems of the machine were checked and the device is ready to work - it works with no problems. 

in case of further questions, please contact us!
 TECHNICAL SPECIFICATION OF HSM 30 BALER PRICE: 8000 EURO’S (NET) TECHNICAL DETAILS: PRESSURE POWER: 30 TONNES ENGINE: 11 KW DIMENSIONS OF THE MACHINE: 5410 X 2380 X 1300 MM BALE DIMENSIONS: 100 X 80 X 50-120 CM INLET SIZE: 160 X 80 CM BALE WEIGHT: 150 – 500 KG WEIGHT OF THE MACHINE: 3,5 TONNES BINDING: 4 WIRES, HORIZONTALLY FULL EJECT OF PRODUCED BALE ALL THE SYSTEMS OF THE MACHINE WERE CHECKED AND THE DEVICE IS READY TO WORK - IT WORKS WITH NO PROBLEMS. IN CASE OF FURTHER QUESTIONS, PLEASE CONTACT US!
Vendedor: Bartontech
Año de construcción: usado
Ubicación: Land-x-travel:800 mm<br/>y-travel:599 mm<br/>z-travel:500 mm<br/>total power requirement:32 kw<br/>weight of the machine ca.:ca. 10 t<br/>spindle speed max.:36.000 u/min<br/>tool magazin::36 <br/>tool taper:hsk e-40 <br/>number of axles:3 st.<br/>magnetic-table:3 stück<br/>mode of operation:4 <br/>pallet table size:ica 600x250 mm<br/>working spindel hours:4895 h<br/>aps (advanced process system): <br/>itc intelligent thermal control: <br/>kinematicsopt: <br/>: bar<br/>air trough spindle: <br/>:blum-laser <br/><br/> X-TRAVEL:800 MM
Y-TRAVEL:599 MM
Z-TRAVEL:500 MM
TOTAL POWER REQUIREMENT:32 KW
WEIGHT OF THE MACHINE CA.:CA. 10 T
SPINDLE SPEED MAX.:36.000 U/MIN
TOOL MAGAZIN::36
TOOL TAPER:HSK E-40
NUMBER OF AXLES:3 ST.
MAGNETIC-TABLE:3 STüCK
MODE OF OPERATION:4
PALLET TABLE SIZE:ICA 600X250 MM
WORKING SPINDEL HOURS:4895 H
APS (ADVANCED PROCESS SYSTEM):
ITC INTELLIGENT THERMAL CONTROL:
KINEMATICSOPT:
: BAR
AIR TROUGH SPINDLE:
:BLUM-LASER

Vendedor: VIG CNC & Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-automatic baler
 
manufacturer: hsm
 
type: vk 4012
 
year of construction: 2005 


specifications: 
pressing force: 45 t
channel format: 720 x 900 mm (w x h)
setting: 4 x horizontal
filler: 1.000 x 650 mm
power: 22 kw
with superchargers

throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h
bale dimensions: approx. 720 x 900 x length (600-1.200) mm

including funnel in special execution for the purpose of manual loading   AUTOMATIC BALER MANUFACTURER: HSM TYPE: VK 4012 YEAR OF CONSTRUCTION: 2005 SPECIFICATIONS: PRESSING FORCE: 45 T CHANNEL FORMAT: 720 X 900 MM (W X H) SETTING: 4 X HORIZONTAL FILLER: 1.000 X 650 MM POWER: 22 KW WITH SUPERCHARGERS THROUGHPUT CAPACITY AT 40 KG/M³ BULK DENSITY: MAXIMUM APPROX. 12.8 T/H BALE DIMENSIONS: APPROX. 720 X 900 X LENGTH (600-1.200) MM INCLUDING FUNNEL IN SPECIAL EXECUTION FOR THE PURPOSE OF MANUAL LOADING
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: biesse 5 achsmaschine, type: arrow ft-5 achsmaschine, year: 2007, control: xp 600, working range x: 2 x 1600 , working range y-axis: 2600, working range z: 300, c axis: yes, b-axis: yes, pendulum processing: yes, number of milling spindles: 1, tool adaption system: hsk 63f, milling engine 1 hours power: 12, rpm 1): ca. 24000, number of tools per tool-magazine: 10, vertical drills-x: 18, horizontal drills-x: 3, number of tables: 2, raster table: yes, 2 station allocation: yes, stops in the table rear: yes, vacuum pumps m³/h: 2 x 250, drill vertical: 3, saw unit: 120 mm, portal machine: yes, werkstückspannsystem: vakuum, schnittstelle dxf: yes, zentralschnierung: yes, available: sofort, free text: wassergekühlte spindel, year :2007 MANUFACTURER: BIESSE 5 ACHSMASCHINE, TYPE: ARROW FT-5 ACHSMASCHINE, YEAR: 2007, CONTROL: XP 600, WORKING RANGE X: 2 X 1600 , WORKING RANGE Y-AXIS: 2600, WORKING RANGE Z: 300, C AXIS: YES, B-AXIS: YES, PENDULUM PROCESSING: YES, NUMBER OF MILLING SPINDLES: 1, TOOL ADAPTION SYSTEM: HSK 63F, MILLING ENGINE 1 HOURS POWER: 12, RPM 1): CA. 24000, NUMBER OF TOOLS PER TOOL-MAGAZINE: 10, VERTICAL DRILLS-X: 18, HORIZONTAL DRILLS-X: 3, NUMBER OF TABLES: 2, RASTER TABLE: YES, 2 STATION ALLOCATION: YES, STOPS IN THE TABLE REAR: YES, VACUUM PUMPS M&SUP3;/H: 2 X 250, DRILL VERTICAL: 3, SAW UNIT: 120 MM, PORTAL MACHINE: YES, WERKST&UUML;CKSPANNSYSTEM: VAKUUM, SCHNITTSTELLE DXF: YES, ZENTRALSCHNIERUNG: YES, AVAILABLE: SOFORT, FREE TEXT: WASSERGEK&UUML;HLTE SPINDEL, YEAR :2007
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cutting width: 3,8 x 50  mm 	
year of production: 1995
supply: 400 v/ 4 kw 	
price: 	to inquiry
security leve: 	din 66399 o-2/p-3/t-3/e-2/

the machine is fully operational and after service. 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939
  CUTTING WIDTH: 3,8 X 50 MM YEAR OF PRODUCTION: 1995 SUPPLY: 400 V/ 4 KW PRICE: TO INQUIRY SECURITY LEVE: DIN 66399 O-2/P-3/T-3/E-2/ THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-x-travel: 2000 mm<br/>y-travel: 1000 mm<br/>z-travel: 800 mm<br/>spindle turning speed range: 4  stufen    von <br/>spindle turning speed range: 20 - 3150 u/min<br/>spindle taper: sk 60 + sk 50 <br/>milling head -swivable +/-: 45 °<br/>copying travel - horizontal/cross: 300 mm<br/>copying travel face: 200 mm<br/>distance spindle /table: 200 bis 1000 mm<br/>table surface area: 4400 x 1000 mm<br/>distance spindle center to column: 1120 mm<br/>table load capacity: 8000 kp<br/>total power requirement: 30 kw<br/>weight of the machine ca.: 56 t<br/>dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m<br/>machine is in an excellent condition, continuously maintained by the manufacturer<br/>? control d + r, extended with hsm<br/>? droop & rein  - copy control type kc<br/>? hf spindle tdm hk 12-02, 15000 rpm<br/><br/><br/><br/><br/> X-TRAVEL: 2000 MM
Y-TRAVEL: 1000 MM
Z-TRAVEL: 800 MM
SPINDLE TURNING SPEED RANGE: 4 STUFEN VON
SPINDLE TURNING SPEED RANGE: 20 - 3150 U/MIN
SPINDLE TAPER: SK 60 + SK 50
MILLING HEAD -SWIVABLE +/-: 45 °
COPYING TRAVEL - HORIZONTAL/CROSS: 300 MM
COPYING TRAVEL FACE: 200 MM
DISTANCE SPINDLE /TABLE: 200 BIS 1000 MM
TABLE SURFACE AREA: 4400 X 1000 MM
DISTANCE SPINDLE CENTER TO COLUMN: 1120 MM
TABLE LOAD CAPACITY: 8000 KP
TOTAL POWER REQUIREMENT: 30 KW
WEIGHT OF THE MACHINE CA.: 56 T
DIMENSIONS OF THE MACHINE CA.: 7,5 X 5,0 X 4,4 M
MACHINE IS IN AN EXCELLENT CONDITION, CONTINUOUSLY MAINTAINED BY THE MANUFACTURER
? CONTROL D + R, EXTENDED WITH HSM
? DROOP & REIN - COPY CONTROL TYPE KC
? HF SPINDLE TDM HK 12-02, 15000 RPM




Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-cnc milling machine

manufacturer: micron type: hsm 700 v year of construction: 1999
control: heidenhain atek spindle micron 2018 changed
hours of operation: approx. 1000 h / year

traverse paths: x - 700 mm y - axis axis 580 mm z - axis 550 mm

accessories: clamping pliers pictures

documents are available.

machine is ready for use and can be tested. 

!!!! machine is delivered until the end of 2019.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 

 CNC MILLING MACHINE MANUFACTURER: MICRON TYPE: HSM 700 V YEAR OF CONSTRUCTION: 1999 CONTROL: HEIDENHAIN ATEK SPINDLE MICRON 2018 CHANGED HOURS OF OPERATION: APPROX. 1000 H / YEAR TRAVERSE PATHS: X - 700 MM Y - AXIS AXIS 580 MM Z - AXIS 550 MM ACCESSORIES: CLAMPING PLIERS PICTURES DOCUMENTS ARE AVAILABLE. MACHINE IS READY FOR USE AND CAN BE TESTED. !!!! MACHINE IS DELIVERED UNTIL THE END OF 2019. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-hydraulic automatic hack-saw<br>6 sawing-speeds<br>cooling<br>sawblade: 700x55x2,5 mm<br>3,2 kw<br>380 v<br>weight: 2,5 to HYDRAULIC AUTOMATIC HACK-SAW
6 SAWING-SPEEDS
COOLING
SAWBLADE: 700X55X2,5 MM
3,2 KW
380 V
WEIGHT: 2,5 TO
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-max. pressure: 	16 tons 	
year of production: 1992
unit pressure: 	2.08 kg/cm² 	
productivity: 	3 bale/h., ca. 500kg/h
bale dimensions: 1100x700x950 mm 
price: 	to inquiry
bale weight: ca. 150-250 kg 	  	 
supply: 	400 v/4 kw 	  	 


the machine is fully operational and after service. premium paint renovation - subcharge of 595 eur


englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 MAX. PRESSURE: 16 TONS YEAR OF PRODUCTION: 1992 UNIT PRESSURE: 2.08 KG/CM² PRODUCTIVITY: 3 BALE/H., CA. 500KG/H BALE DIMENSIONS: 1100X700X950 MM PRICE: TO INQUIRY BALE WEIGHT: CA. 150-250 KG SUPPLY: 400 V/4 KW THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. PREMIUM PAINT RENOVATION - SUBCHARGE OF 595 EUR ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-air filter system, circa 8000 mm x 1200 mm x 1200 mm, comefri fan type tlz 450a 11kw, 3x shut-off valves ari type fr1.2 2000n, circulation pump grundfos, various manual shut-off valves, asser pump aquella gs 690, various piping, superposed ventilation channel approx. 9000 mm x 1000 AIR FILTER SYSTEM, CIRCA 8000 MM X 1200 MM X 1200 MM, COMEFRI FAN TYPE TLZ 450A 11KW, 3X SHUT-OFF VALVES ARI TYPE FR1.2 2000N, CIRCULATION PUMP GRUNDFOS, VARIOUS MANUAL SHUT-OFF VALVES, ASSER PUMP AQUELLA GS 690, VARIOUS PIPING, SUPERPOSED VENTILATION CHANNEL APPROX. 9000 MM X 1000
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-max. pressure: 	14 tons 	
year of production: 	1993
unit pressure: 	2.92 kg/cm² 	
productivity: 	3 bale/h., ca. 400kg/h
bale dimensions: 800x600(600-1000) mm 	
price: 	to inquiry
bale weight: ca. 100-200 kg 	  	 
supply: 	380v/7,5kw 	  	 

 
the machine is fully operational and after service. premium paint renovation - subcharge of 750 eur


englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 MAX. PRESSURE: 14 TONS YEAR OF PRODUCTION: 1993 UNIT PRESSURE: 2.92 KG/CM² PRODUCTIVITY: 3 BALE/H., CA. 400KG/H BALE DIMENSIONS: 800X600(600-1000) MM PRICE: TO INQUIRY BALE WEIGHT: CA. 100-200 KG SUPPLY: 380V/7,5KW THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. PREMIUM PAINT RENOVATION - SUBCHARGE OF 750 EUR ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-heidenhain itnc 530<br>longitudinal travel (x-axis) (mm) 400<br>transversal travel (y-axis) (mm)  240<br>vertical travel (z-axis) (mm) 350<br>spindle taper <br>pos atc 68<br> HEIDENHAIN ITNC 530
LONGITUDINAL TRAVEL (X-AXIS) (MM) 400
TRANSVERSAL TRAVEL (Y-AXIS) (MM) 240
VERTICAL TRAVEL (Z-AXIS) (MM) 350
SPINDLE TAPER
POS ATC 68
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-sausage ripper fa. heinrich with conveyor band  SAUSAGE RIPPER FA. HEINRICH WITH CONVEYOR BAND
Vendedor: HFM Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-<br>longitudinal travel (x-axis) (mm) 700<br>transversal travel (y-axis) (mm)  500<br>vertical travel (z-axis) (mm) 550<br>spindle taper <br>pos atc 12<br>
LONGITUDINAL TRAVEL (X-AXIS) (MM) 700
TRANSVERSAL TRAVEL (Y-AXIS) (MM) 500
VERTICAL TRAVEL (Z-AXIS) (MM) 550
SPINDLE TAPER
POS ATC 12
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-cutting width: 6 x 40-53 mm 	
year of production: 	2007
supply:	400 v / 9,2 kw 
security leve: din 66399 	
p4 din 66399-1
f2 din 66399-1 pkt. 5.2

brand new cutting blades

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 CUTTING WIDTH: 6 X 40-53 MM YEAR OF PRODUCTION: 2007 SUPPLY: 400 V / 9,2 KW SECURITY LEVE: DIN 66399 P4 DIN 66399-1 F2 DIN 66399-1 PKT. 5.2 BRAND NEW CUTTING BLADES ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-cutting width: 3.8 mm 	
year of production: 1999
productivity: 	app 100 sheet (din a4, 70g/m²) 
cutting speed: 	354mm/s 
security leve: din 66399 	p2
supply: 400 v / 4 kw 	  	 

 
the price includes paint renovation and all repairs necessary to deliver a fully functioning machine. 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  CUTTING WIDTH: 3.8 MM YEAR OF PRODUCTION: 1999 PRODUCTIVITY: APP 100 SHEET (DIN A4, 70G/M²) CUTTING SPEED: 354MM/S SECURITY LEVE: DIN 66399 P2 SUPPLY: 400 V / 4 KW THE PRICE INCLUDES PAINT RENOVATION AND ALL REPAIRS NECESSARY TO DELIVER A FULLY FUNCTIONING MACHINE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-max. pressure: 8 tons 	
year of production: 1999
unit pressure: 	2.46 kg/cm² 	
productivity: 3 bale/h.
bale dimensions: 650x500x500 mm
bale weight: 	ca. 50 kg 	  	 
supply: 400 v/ 4 kw 	  	 

the price includes all repairs necessary to deliver a fully functioning machine. 

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 MAX. PRESSURE: 8 TONS YEAR OF PRODUCTION: 1999 UNIT PRESSURE: 2.46 KG/CM² PRODUCTIVITY: 3 BALE/H. BALE DIMENSIONS: 650X500X500 MM BALE WEIGHT: CA. 50 KG SUPPLY: 400 V/ 4 KW THE PRICE INCLUDES ALL REPAIRS NECESSARY TO DELIVER A FULLY FUNCTIONING MACHINE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-max. pressure: 9 tons 	
year of production:  1991
unit pressure: 36 tons/m² 	  	 
cross-section of the channel: 500 x 500  mm 	
filling inlet: 400 x 450 mm
supply: 400 v/ 3,5 kw 	
bale tying: manual

shredders
cutting width: 3,8 x 40  mm 	
year of production: 1991
supply: 400 v / 7,5 kw 	
security leve: 	
p4 din 66399-1
f2 din 66399-1 pkt. 5.2

 
the machine is fully operational and after service.
premium paint renovation - subcharge

kontakt:
englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939 
 MAX. PRESSURE: 9 TONS YEAR OF PRODUCTION: 1991 UNIT PRESSURE: 36 TONS/M² CROSS-SECTION OF THE CHANNEL: 500 X 500 MM FILLING INLET: 400 X 450 MM SUPPLY: 400 V/ 3,5 KW BALE TYING: MANUAL SHREDDERS CUTTING WIDTH: 3,8 X 40 MM YEAR OF PRODUCTION: 1991 SUPPLY: 400 V / 7,5 KW SECURITY LEVE: P4 DIN 66399-1 F2 DIN 66399-1 PKT. 5.2 THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. PREMIUM PAINT RENOVATION - SUBCHARGE KONTAKT: ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)