35 ofertas

Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-side forklifts including long freight traverse used less than 700 hours - -:
 
price from site: â?¬13.500.-(net)!
 
manufacturer: om fantuzzi
type: sf 40 l, sideloader mv sf 4000.
year of construction: 1992
hours of operation: only 695 hours
load capacity: 4000 kg
platform width: 1400 mm
lastschwerpkt. 700 mm
platform height: 800 mm
dimensions
length 3700 mm
width 2080 mm
telescopic mast:
lifting height: 4000 mm
height: 2950 mm
free lift: 800 mm
tyres: 27.10 - 12 - pr 14
engine iveco diesel 8141 i,.
44 kw/60 hp at 3000 rpm
rexroth - hydrostatic, transmission
with power shift - inching
axis hurth - rear axle, with internal multi-disk brake in oil bath.
lighting protection proper lighting system with iron bars.
cabin 3-sided glazed
wide carriage ak - ak 5000 mm
residual capacity 3200 kg
weight: 6.000 kg
condition: good, regular maintenance
available: available now
location: room offenburg, germany (black forest)
 
more data are available as pdf - shipping like on request!
  SIDE FORKLIFTS INCLUDING LONG FREIGHT TRAVERSE USED LESS THAN 700 HOURS - -: PRICE FROM SITE: Â?¬13.500.-(NET)! MANUFACTURER: OM FANTUZZI TYPE: SF 40 L, SIDELOADER MV SF 4000. YEAR OF CONSTRUCTION: 1992 HOURS OF OPERATION: ONLY 695 HOURS LOAD CAPACITY: 4000 KG PLATFORM WIDTH: 1400 MM LASTSCHWERPKT. 700 MM PLATFORM HEIGHT: 800 MM DIMENSIONS LENGTH 3700 MM WIDTH 2080 MM TELESCOPIC MAST: LIFTING HEIGHT: 4000 MM HEIGHT: 2950 MM FREE LIFT: 800 MM TYRES: 27.10 - 12 - PR 14 ENGINE IVECO DIESEL 8141 I,. 44 KW/60 HP AT 3000 RPM REXROTH - HYDROSTATIC, TRANSMISSION WITH POWER SHIFT - INCHING AXIS HURTH - REAR AXLE, WITH INTERNAL MULTI-DISK BRAKE IN OIL BATH. LIGHTING PROTECTION PROPER LIGHTING SYSTEM WITH IRON BARS. CABIN 3-SIDED GLAZED WIDE CARRIAGE AK - AK 5000 MM RESIDUAL CAPACITY 3200 KG WEIGHT: 6.000 KG CONDITION: GOOD, REGULAR MAINTENANCE AVAILABLE: AVAILABLE NOW LOCATION: ROOM OFFENBURG, GERMANY (BLACK FOREST) MORE DATA ARE AVAILABLE AS PDF - SHIPPING LIKE ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 2750 x 1800 x 2200 mm<br/>description: max. length of the piece 1400 mm. milling travel 400 mm. height centres 165 mm. table 2250 x 520 mm., internal reference 210.255 WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 2750 X 1800 X 2200 MM
DESCRIPTION: MAX. LENGTH OF THE PIECE 1400 MM. MILLING TRAVEL 400 MM. HEIGHT CENTRES 165 MM. TABLE 2250 X 520 MM., INTERNAL REFERENCE 210.255
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 600 €
Ubicación: Land-traverse paths x-y-z: 70 - 100-30 mm<br/>  table: 500 x 275 mm<br/>  table clamping surface: 360 x 160 mm<br/>  speed range: recording: collets<br/>  accessories: coolant system, collet chucks<br/>  power requirements: condition: good<br/>  weight: approx.  0.3 t<br/>  dimensions: 700 x 1,000 x 1,200 mm TRAVERSE PATHS X-Y-Z: 70 - 100-30 MM
TABLE: 500 X 275 MM
TABLE CLAMPING SURFACE: 360 X 160 MM
SPEED RANGE: RECORDING: COLLETS
ACCESSORIES: COOLANT SYSTEM, COLLET CHUCKS
POWER REQUIREMENTS: CONDITION: GOOD
WEIGHT: APPROX. 0.3 T
DIMENSIONS: 700 X 1,000 X 1,200 MM
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Año de construcción: usado
Ubicación: Land-max. wheel diameter: mm<br/>gear width: mm<br/>max. module: <br/>min. module: <br/>total power requirement: kw<br/>weight of the machine ca.:6 t<br/>dimensions of the machine ca.:3,0 x 2,6 x 2,7 m<br/><br/> MAX. WHEEL DIAMETER: MM
GEAR WIDTH: MM
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.:6 T
DIMENSIONS OF THE MACHINE CA.:3,0 X 2,6 X 2,7 M

Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 9.000 €
Ubicación: Land-weight approx.: 6200 kg<br/>dimensions (l x w x h) approx.: 1930 x 2000 x 1900 mm<br/>description: work gear outside diameter min/max 190/550 mm. face width (parallel shaving) min 250 mm. work gerar pitch, module (dp) min/max 1/10. external shaving diameter min/max 175/260 mm. main drive motor 3 kw WEIGHT APPROX.: 6200 KG
DIMENSIONS (L X W X H) APPROX.: 1930 X 2000 X 1900 MM
DESCRIPTION: WORK GEAR OUTSIDE DIAMETER MIN/MAX 190/550 MM. FACE WIDTH (PARALLEL SHAVING) MIN 250 MM. WORK GERAR PITCH, MODULE (DP) MIN/MAX 1/10. EXTERNAL SHAVING DIAMETER MIN/MAX 175/260 MM. MAIN DRIVE MOTOR 3 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-at Austria, 4407 Steyr-Gleink
Vendedor: AUER
Año de construcción: usado
Ubicación: Land-workpiece diameter: 125 mm<br/>module: 4 <br/>control: siemens 840 <br/>x-axis: 105 mm<br/>y-axis: 40 mm<br/>z-axis: 500 mm<br/>total power requirement: 47 kva<br/>weight of the machine ca.: 5,5 t<br/>dimensions of the machine ca.: 2,6x2,1x3,1 m<br/>with measuring and palletizing system from hörzer & fehrenbach<br/><br/>for pinion (shaft parts)<br/>workpiece diameter: 17-39.5 mm<br/>component height: approx. 6-15 mm<br/>oblique as well as straight toothed<br/><br/><br/><br/><br/> WORKPIECE DIAMETER: 125 MM
MODULE: 4
CONTROL: SIEMENS 840
X-AXIS: 105 MM
Y-AXIS: 40 MM
Z-AXIS: 500 MM
TOTAL POWER REQUIREMENT: 47 KVA
WEIGHT OF THE MACHINE CA.: 5,5 T
DIMENSIONS OF THE MACHINE CA.: 2,6X2,1X3,1 M
WITH MEASURING AND PALLETIZING SYSTEM FROM HöRZER & FEHRENBACH

FOR PINION (SHAFT PARTS)
WORKPIECE DIAMETER: 17-39.5 MM
COMPONENT HEIGHT: APPROX. 6-15 MM
OBLIQUE AS WELL AS STRAIGHT TOOTHED




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-groove width 16 mm<br/> x-travel 400 mm<br/> table length 1260 mm<br/> table width 375 mm<br/> total power requirement 4 kw<br/> weight of the machine ca. 3 t<br/> dimensions of the machine ca. 1,8 x 1,4 x 1,8 m GROOVE WIDTH 16 MM
X-TRAVEL 400 MM
TABLE LENGTH 1260 MM
TABLE WIDTH 375 MM
TOTAL POWER REQUIREMENT 4 KW
WEIGHT OF THE MACHINE CA. 3 T
DIMENSIONS OF THE MACHINE CA. 1,8 X 1,4 X 1,8 M
Vendedor: G. Folmer Industriebedarf
Año de construcción: usado
Ubicación: Land-workpiece diameter: 125 mm<br/>module: 4 <br/>control: siemens 840 <br/>x-axis: 105 mm<br/>y-axis: 40 mm<br/>z-axis: 500 mm<br/>total power requirement: 47 kva<br/>weight of the machine ca.: 5,5 t<br/>dimensions of the machine ca.: 2,6x2,1x3,1 m<br/>with measuring and palletizing system from hörzer & fehrenbach<br/><br/>for gearwheels (bore receiver)<br/>workpiece diameter: 17-39.5 mm<br/>component height: approx. 6-15 mm<br/>oblique as well as straight toothed<br/><br/><br/><br/><br/> WORKPIECE DIAMETER: 125 MM
MODULE: 4
CONTROL: SIEMENS 840
X-AXIS: 105 MM
Y-AXIS: 40 MM
Z-AXIS: 500 MM
TOTAL POWER REQUIREMENT: 47 KVA
WEIGHT OF THE MACHINE CA.: 5,5 T
DIMENSIONS OF THE MACHINE CA.: 2,6X2,1X3,1 M
WITH MEASURING AND PALLETIZING SYSTEM FROM HöRZER & FEHRENBACH

FOR GEARWHEELS (BORE RECEIVER)
WORKPIECE DIAMETER: 17-39.5 MM
COMPONENT HEIGHT: APPROX. 6-15 MM
OBLIQUE AS WELL AS STRAIGHT TOOTHED




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 150 mm<br/>gear width: 50 mm<br/>max. module: 4 <br/>min. module: 1 <br/>tailstock travel: 25/70 mm<br/>max. tool diameter: 175 mm<br/>turning speed range - stepless: 50-250 u/min<br/>total power requirement: 8 kw<br/>weight of the machine ca.: 2,5 t<br/>dimensions of the machine ca.: 3,2x2,2x2,9 m<br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 150 MM
GEAR WIDTH: 50 MM
MAX. MODULE: 4
MIN. MODULE: 1
TAILSTOCK TRAVEL: 25/70 MM
MAX. TOOL DIAMETER: 175 MM
TURNING SPEED RANGE - STEPLESS: 50-250 U/MIN
TOTAL POWER REQUIREMENT: 8 KW
WEIGHT OF THE MACHINE CA.: 2,5 T
DIMENSIONS OF THE MACHINE CA.: 3,2X2,2X2,9 M





Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-table diameter: 265 mm<br/>table load: 100 kg<br/>table height: 110 mm<br/>number of t-slots: 8 <br/>t-slot - width: 12 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,03 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TABLE DIAMETER: 265 MM
TABLE LOAD: 100 KG
TABLE HEIGHT: 110 MM
NUMBER OF T-SLOTS: 8
T-SLOT - WIDTH: 12 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,03 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-groove width: 16 mm<br/>x-travel: 16-200 mm<br/>table length: 1500 mm<br/>table width: 375 mm<br/>milling spindle: iso 40 <br/>max. clampable toolpiece shaft diameter: 30 mm<br/>max. useable hobs, normal diameter: 40 mm<br/>distance between milling spindle and table: 150-250 mm<br/>axial move. of milling spindle (auto./manual): 120 mm<br/>vertical adjust. of milling slide (manual): 100 mm<br/>weight of the machine ca.: 3,1 t<br/>dimensions of the machine ca.:  2,00x1,40x2,40 m<br/>k4 - techdetail uk:  3 x 0,012-0,05 mm/u<br/>k4 - techdetail uk: 250 mm<br/>k4 - techdetail uk: 0,11 kw<br/>k4 - techdetail uk: 0,6/1,1 kw<br/>k4 - techdetail uk: 16x60 mm<br/>k4 - techdetail uk: 0,85 kw<br/>k4 - techdetail uk: 0-2,0 mm<br/>k4 - techdetail uk: 12 x 280 - 3550 u/min<br/>condition:  ready for production<br/>the machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. roughing and finishing can be done in one single clamping.<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> GROOVE WIDTH: 16 MM
X-TRAVEL: 16-200 MM
TABLE LENGTH: 1500 MM
TABLE WIDTH: 375 MM
MILLING SPINDLE: ISO 40
MAX. CLAMPABLE TOOLPIECE SHAFT DIAMETER: 30 MM
MAX. USEABLE HOBS, NORMAL DIAMETER: 40 MM
DISTANCE BETWEEN MILLING SPINDLE AND TABLE: 150-250 MM
AXIAL MOVE. OF MILLING SPINDLE (AUTO./MANUAL): 120 MM
VERTICAL ADJUST. OF MILLING SLIDE (MANUAL): 100 MM
WEIGHT OF THE MACHINE CA.: 3,1 T
DIMENSIONS OF THE MACHINE CA.: 2,00X1,40X2,40 M
K4 - TECHDETAIL UK: 3 X 0,012-0,05 MM/U
K4 - TECHDETAIL UK: 250 MM
K4 - TECHDETAIL UK: 0,11 KW
K4 - TECHDETAIL UK: 0,6/1,1 KW
K4 - TECHDETAIL UK: 16X60 MM
K4 - TECHDETAIL UK: 0,85 KW
K4 - TECHDETAIL UK: 0-2,0 MM
K4 - TECHDETAIL UK: 12 X 280 - 3550 U/MIN
CONDITION: READY FOR PRODUCTION
THE MACHINE IS SUITABLE FOR THE MANUFACTURE OF FLUTES AND SLOTS USING UNDERSIZE CUTTERS WITH HYDRAULIC ADJUSTMENT. ROUGHING AND FINISHING CAN BE DONE IN ONE SINGLE CLAMPING.












Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 0 mm<br/>max. number of teeth: 0 <br/>max. module:  <br/>min. module:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>cnc controlled milling machine for synchronous rings<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 0 MM
MAX. NUMBER OF TEETH: 0
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
CNC CONTROLLED MILLING MACHINE FOR SYNCHRONOUS RINGS



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
advance min / max.  45/125 golpe/min  
cone spindle  iso 40  
dividing head angle  110º  
module  8  
nº avances del husillo  4  
spindel nr.  1  
spindle speed min / max.  250/2800 r.p.m.  
spindle speeds no.  8  
Ø maximum  300 mm  
electrical characteristics  
total power  3 kw  
voltage  220/380v  
dimensions and weights  
high  1450 mm  
long  1850 mm  
weight  1500 kg  
width  1400 mm  
other features  
included accessories  tiranta para piezas neumaticas y electricas  
no. manufacturing  13773  
 GENERAL CHARACTERISTICS ADVANCE MIN / MAX. 45/125 GOLPE/MIN CONE SPINDLE ISO 40 DIVIDING HEAD ANGLE 110º MODULE 8 Nº AVANCES DEL HUSILLO 4 SPINDEL NR. 1 SPINDLE SPEED MIN / MAX. 250/2800 R.P.M. SPINDLE SPEEDS NO. 8 Ø MAXIMUM 300 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 3 KW VOLTAGE 220/380V DIMENSIONS AND WEIGHTS HIGH 1450 MM LONG 1850 MM WEIGHT 1500 KG WIDTH 1400 MM OTHER FEATURES INCLUDED ACCESSORIES TIRANTA PARA PIEZAS NEUMATICAS Y ELECTRICAS NO. MANUFACTURING 13773
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 280 mm<br/>max. number of teeth: 100 <br/>max. module: 6 <br/>min. module: 1 <br/>total power requirement: 6 kw<br/>weight of the machine ca.: 2500 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 280 MM
MAX. NUMBER OF TEETH: 100
MAX. MODULE: 6
MIN. MODULE: 1
TOTAL POWER REQUIREMENT: 6 KW
WEIGHT OF THE MACHINE CA.: 2500 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
cutter Ø max / min  260/180 mm  
Ø max. / min. workpiece  550 / 20 mm.  
cutter length max / min  30/20 mm  
maximum length workpiece  250 mm  
module  8  
electrical characteristics  
total power  6,5 kw.  
voltage  220/380 w.  
dimensions and weights  
high  2200 mm  
long  1650 mm  
weight  6.500 kg.  
width  1450 mm  
other features  
included accessories  centrifugadora de virutas, variador de velocidad para el afeitador, 2 puntos 1 hidráulico para Ø pequeño y otro manual para Ø hasta 550mm /centrifuge chips, variable speed for shaver, 2 points for small or 1 hydraulic and a manual for Ø up to 550mm  
no. manufacturing  18705  
url youtube  abc://youtu.be/4ksyjrnpp5e  
year  1967  
 GENERAL CHARACTERISTICS CUTTER Ø MAX / MIN 260/180 MM Ø MAX. / MIN. WORKPIECE 550 / 20 MM. CUTTER LENGTH MAX / MIN 30/20 MM MAXIMUM LENGTH WORKPIECE 250 MM MODULE 8 ELECTRICAL CHARACTERISTICS TOTAL POWER 6,5 KW. VOLTAGE 220/380 W. DIMENSIONS AND WEIGHTS HIGH 2200 MM LONG 1650 MM WEIGHT 6.500 KG. WIDTH 1450 MM OTHER FEATURES INCLUDED ACCESSORIES CENTRIFUGADORA DE VIRUTAS, VARIADOR DE VELOCIDAD PARA EL AFEITADOR, 2 PUNTOS 1 HIDRáULICO PARA Ø PEQUEñO Y OTRO MANUAL PARA Ø HASTA 550MM /CENTRIFUGE CHIPS, VARIABLE SPEED FOR SHAVER, 2 POINTS FOR SMALL OR 1 HYDRAULIC AND A MANUAL FOR Ø UP TO 550MM NO. MANUFACTURING 18705 URL YOUTUBE ABC://YOUTU.BE/4KSYJRNPP5E YEAR 1967
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. grinding diameter: 400 mm<br/>grinding width: 0 mm<br/>max. module:  <br/>min. module:  <br/>total power requirement: 3 kw<br/>weight of the machine ca.: 4,2 t<br/>dimensions of the machine ca.:  m<br/>shaver cutter Ø, min./max.	64 - 320	mm<br/>module range	1 - 12<br/>shaver cutter width, max.	40	mm<br/><br/>no. of teeth	13 - 240<br/>pitch block Ø	73 - 320	mm<br/><br/>speeds of workpiece slide	5 / 20 / 30 / 40	teeth per min.<br/>grinding slide speed	690	rpm<br/>grinding slide Ø	762	mm<br/><br/>grinding wheel swivelling (pressure angle)	5 - 21	°<br/>grinding slide swivelling (helical angle)	2 x 35	°<br/>grinding slide adjustment, vertical	240	mm<br/><br/>cutting speed	1 / 0.5 / 0.25	m/min<br/><br/>spindle drive	1.1 	kw<br/>total electrical load, approx.	3 kw  -  500 v  -  50	hz<br/>weight, approx.	4,200	kg<br/><br/>accessories / special features    <br/>*	machine is suitable for grinding internal and external shaver cutters.  it is also suitable for master gears as well as cutters for gear shapers.<br/><br/>unfortunately the machine does not have many accessories.  it would therefore be a good investment as a second machine if you already have suitable accessories available.<br/><br/><br/><br/> MAX. GRINDING DIAMETER: 400 MM
GRINDING WIDTH: 0 MM
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: 3 KW
WEIGHT OF THE MACHINE CA.: 4,2 T
DIMENSIONS OF THE MACHINE CA.: M
SHAVER CUTTER Ø, MIN./MAX. 64 - 320 MM
MODULE RANGE 1 - 12
SHAVER CUTTER WIDTH, MAX. 40 MM

NO. OF TEETH 13 - 240
PITCH BLOCK Ø 73 - 320 MM

SPEEDS OF WORKPIECE SLIDE 5 / 20 / 30 / 40 TEETH PER MIN.
GRINDING SLIDE SPEED 690 RPM
GRINDING SLIDE Ø 762 MM

GRINDING WHEEL SWIVELLING (PRESSURE ANGLE) 5 - 21 °
GRINDING SLIDE SWIVELLING (HELICAL ANGLE) 2 X 35 °
GRINDING SLIDE ADJUSTMENT, VERTICAL 240 MM

CUTTING SPEED 1 / 0.5 / 0.25 M/MIN

SPINDLE DRIVE 1.1 KW
TOTAL ELECTRICAL LOAD, APPROX. 3 KW - 500 V - 50 HZ
WEIGHT, APPROX. 4,200 KG

ACCESSORIES / SPECIAL FEATURES
* MACHINE IS SUITABLE FOR GRINDING INTERNAL AND EXTERNAL SHAVER CUTTERS. IT IS ALSO SUITABLE FOR MASTER GEARS AS WELL AS CUTTERS FOR GEAR SHAPERS.

UNFORTUNATELY THE MACHINE DOES NOT HAVE MANY ACCESSORIES. IT WOULD THEREFORE BE A GOOD INVESTMENT AS A SECOND MACHINE IF YOU ALREADY HAVE SUITABLE ACCESSORIES AVAILABLE.



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
cutter Ø max / min  260/175 mm  
Ø max. / min. workpiece  220/20 mm  
cutter length max / min  30/20 mm  
maximum length workpiece  150 mm  
brand cnc  siemens  
model cnc  810 d  
module  6  
electrical characteristics  
total power  15 kva  
voltage  220/380 w.  
dimensions and weights  
high  2.100 mm  
long  1.695 mm  
weight  6.300 kg  
width  1.560 mm  
other features  
included accessories  cargador/descargador automático de piezas, contrapunto hidráuliuco  
no. manufacturing  18509  
 GENERAL CHARACTERISTICS CUTTER Ø MAX / MIN 260/175 MM Ø MAX. / MIN. WORKPIECE 220/20 MM CUTTER LENGTH MAX / MIN 30/20 MM MAXIMUM LENGTH WORKPIECE 150 MM BRAND CNC SIEMENS MODEL CNC 810 D MODULE 6 ELECTRICAL CHARACTERISTICS TOTAL POWER 15 KVA VOLTAGE 220/380 W. DIMENSIONS AND WEIGHTS HIGH 2.100 MM LONG 1.695 MM WEIGHT 6.300 KG WIDTH 1.560 MM OTHER FEATURES INCLUDED ACCESSORIES CARGADOR/DESCARGADOR AUTOMáTICO DE PIEZAS, CONTRAPUNTO HIDRáULIUCO NO. MANUFACTURING 18509
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. grinding diameter: 80 - 400 mm<br/>grinding width: 40 mm<br/>max. module: 16 <br/>min. module: 1 <br/>turning speeds: 690 u/min<br/>total power requirement: 5 kw<br/>weight of the machine ca.: 4,2 t<br/><br/><br/><br/><br/> MAX. GRINDING DIAMETER: 80 - 400 MM
GRINDING WIDTH: 40 MM
MAX. MODULE: 16
MIN. MODULE: 1
TURNING SPEEDS: 690 U/MIN
TOTAL POWER REQUIREMENT: 5 KW
WEIGHT OF THE MACHINE CA.: 4,2 T




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  320 mm  
module  6  
hobbing length  210 mm  
minimum number milling teeth  9  
table features  
Ø table  225 mm  
electrical characteristics  
total power  15,4 kw  
voltage  220/380 v  
dimensions and weights  
high  2400 mm  
long  2400 mm  
weight  7200 kg  
width  1800 mm  
other features  
included accessories  cargador automático por 24 piezas norma ce, transportador de virutas magnético, ciclo dos pases unitronics plc, variador de velocidad para la herramienta, accionamiento de velocidad variable para el avance /autoloader for 24 pieces standard ce, magnetic chip conveyor, cycle two passes unitronics plc, speed variator for tool, variable speed drive for advance /  
no. manufacturing  19.163  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 320 MM MODULE 6 HOBBING LENGTH 210 MM MINIMUM NUMBER MILLING TEETH 9 TABLE FEATURES Ø TABLE 225 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 15,4 KW VOLTAGE 220/380 V DIMENSIONS AND WEIGHTS HIGH 2400 MM LONG 2400 MM WEIGHT 7200 KG WIDTH 1800 MM OTHER FEATURES INCLUDED ACCESSORIES CARGADOR AUTOMáTICO POR 24 PIEZAS NORMA CE, TRANSPORTADOR DE VIRUTAS MAGNéTICO, CICLO DOS PASES UNITRONICS PLC, VARIADOR DE VELOCIDAD PARA LA HERRAMIENTA, ACCIONAMIENTO DE VELOCIDAD VARIABLE PARA EL AVANCE /AUTOLOADER FOR 24 PIECES STANDARD CE, MAGNETIC CHIP CONVEYOR, CYCLE TWO PASSES UNITRONICS PLC, SPEED VARIATOR FOR TOOL, VARIABLE SPEED DRIVE FOR ADVANCE / NO. MANUFACTURING 19.163
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-diameter:500 mm<br/>workpiece weight:30 kg<br/>test dia. min.:200 mm<br/>total power requirement:0,03 kw<br/>weight of the machine ca.:1000 kg<br/>dimensions of the machine ca.:1x0,5x1,06 m<br/><br/> DIAMETER:500 MM
WORKPIECE WEIGHT:30 KG
TEST DIA. MIN.:200 MM
TOTAL POWER REQUIREMENT:0,03 KW
WEIGHT OF THE MACHINE CA.:1000 KG
DIMENSIONS OF THE MACHINE CA.:1X0,5X1,06 M

Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
Ø max. gear  320 mm.  
module  6  
hobbing length  210 mm.  
minimum number milling teeth  9  
table features  
Ø table  225 mm.  
electrical characteristics  
total power  15,4 kw.  
voltage  220/380 v.  
dimensions and weights  
high  2.400 mm.  
long  2.400 mm.  
weight  7.200 kg.  
width  1.800 mm.  
other features  
included accessories  siffting automático.  
no. manufacturing  19157  
year  1975  
 GENERAL CHARACTERISTICS Ø MAX. GEAR 320 MM. MODULE 6 HOBBING LENGTH 210 MM. MINIMUM NUMBER MILLING TEETH 9 TABLE FEATURES Ø TABLE 225 MM. ELECTRICAL CHARACTERISTICS TOTAL POWER 15,4 KW. VOLTAGE 220/380 V. DIMENSIONS AND WEIGHTS HIGH 2.400 MM. LONG 2.400 MM. WEIGHT 7.200 KG. WIDTH 1.800 MM. OTHER FEATURES INCLUDED ACCESSORIES SIFFTING AUTOMáTICO. NO. MANUFACTURING 19157 YEAR 1975
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-general characteristics  
stroke longitudinal  400 mm  
transversal stroke  200 mm  
vertical stroke  400 mm  
feeds min / max  9 / 760 mm/min  
number of speeds  9  
spindle speed min / max  180 / 2800 rpm  
table features  
surface of the table  1.240 x 300 mm  
electrical characteristics  
main motor power  2,2 kw  
total power  4 kw  
voltage  220/380 v  
dimensions and weights  
high  1.850 mm  
long  1.700 mm  
weight  1.900 kg  
width  1.600 mm  
other features  
included accessories  visualizador de cotas, divisor vertical, mandrinador automático /dro, vertical divider, automatic mandrinador  
no. manufacturing  16763  
url youtube  abc://youtu.be/k9e2xhf4asw  
 GENERAL CHARACTERISTICS STROKE LONGITUDINAL 400 MM TRANSVERSAL STROKE 200 MM VERTICAL STROKE 400 MM FEEDS MIN / MAX 9 / 760 MM/MIN NUMBER OF SPEEDS 9 SPINDLE SPEED MIN / MAX 180 / 2800 RPM TABLE FEATURES SURFACE OF THE TABLE 1.240 X 300 MM ELECTRICAL CHARACTERISTICS MAIN MOTOR POWER 2,2 KW TOTAL POWER 4 KW VOLTAGE 220/380 V DIMENSIONS AND WEIGHTS HIGH 1.850 MM LONG 1.700 MM WEIGHT 1.900 KG WIDTH 1.600 MM OTHER FEATURES INCLUDED ACCESSORIES VISUALIZADOR DE COTAS, DIVISOR VERTICAL, MANDRINADOR AUTOMáTICO /DRO, VERTICAL DIVIDER, AUTOMATIC MANDRINADOR NO. MANUFACTURING 16763 URL YOUTUBE ABC://YOUTU.BE/K9E2XHF4ASW
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-cnc gear honing machine suitable for gehaertetene zahnraede.
module. 1-6
wheel diameter: 250 mm CNC GEAR HONING MACHINE SUITABLE FOR GEHAERTETENE ZAHNRAEDE. MODULE. 1-6 WHEEL DIAMETER: 250 MM
Vendedor: SENER MASCHINEN
Año de construcción: usado
Ubicación: Land-external diameter of gear shaver min.-max. 80 ? 400 mm.
admitted module min.-max. 1 ? 16 number of grinding teeth min.-max. 15 ? 240 travel of tool holder carrier 200 mm. grinding wheel revolutions 690 r.p.m. vertical rotation of grinding wheel holder head 5º - 21º horizontal rotation of grinding wheel holder head 50º to left and right. grinding wheel diameter 762 mm. weight 4200 kg.    EXTERNAL DIAMETER OF GEAR SHAVER MIN.-MAX. 80 ? 400 MM. ADMITTED MODULE MIN.-MAX. 1 ? 16 NUMBER OF GRINDING TEETH MIN.-MAX. 15 ? 240 TRAVEL OF TOOL HOLDER CARRIER 200 MM. GRINDING WHEEL REVOLUTIONS 690 R.P.M. VERTICAL ROTATION OF GRINDING WHEEL HOLDER HEAD 5º - 21º HORIZONTAL ROTATION OF GRINDING WHEEL HOLDER HEAD 50º TO LEFT AND RIGHT. GRINDING WHEEL DIAMETER 762 MM. WEIGHT 4200 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-external diameter of gear shaver min.-max. 80 ? 400 mm.
admitted module min.-max. 1 ? 16
number of grinding teeth min.-max. 15 ? 240
travel of tool holder carrier 200 mm.
grinding wheel revolutions 690 r.p.m.
vertical rotation of grinding wheel holder head 5º - 21º
horizontal rotation of grinding wheel holder head 35º to left and right.
grinding wheel diameter 762 mm.
weight 4200 kg.     EXTERNAL DIAMETER OF GEAR SHAVER MIN.-MAX. 80 ? 400 MM. ADMITTED MODULE MIN.-MAX. 1 ? 16 NUMBER OF GRINDING TEETH MIN.-MAX. 15 ? 240 TRAVEL OF TOOL HOLDER CARRIER 200 MM. GRINDING WHEEL REVOLUTIONS 690 R.P.M. VERTICAL ROTATION OF GRINDING WHEEL HOLDER HEAD 5º - 21º HORIZONTAL ROTATION OF GRINDING WHEEL HOLDER HEAD 35º TO LEFT AND RIGHT. GRINDING WHEEL DIAMETER 762 MM. WEIGHT 4200 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-max. work piece diameter 250 mm. 
módule 8 
machine weight 9.500 kg.    MAX. WORK PIECE DIAMETER 250 MM. MóDULE 8 MACHINE WEIGHT 9.500 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-de Germany, 97318 Kitzingen
Vendedor: SENER MASCHINEN
Año de construcción: usado
Ubicación: Land-shaving cutter grinding machine hurth, type srs 402
year of manufacture 1988. almost unused.
type of control- conventional 
max. grinding diameter 400 mm 
grinding width 75 mm  
module 6-14 
root circle dia. min. 64 mm 
number of teeth 13 - 300 
roll diameter -toolpieces 73 / 380 mm 
max. helix angle +/- 50 /55 ° 
pressure angle 5 / 24 ° 
dimensions of grinding wheel 660 / 762 mm 
grinding wheel speeds 400- 1000 u/min 
total power requirement 10 kva 
weight of the machine ca. 5 t 
dimensions of the machine ca. 2 x 2,25 x 2,45 m SHAVING CUTTER GRINDING MACHINE HURTH, TYPE SRS 402 YEAR OF MANUFACTURE 1988. ALMOST UNUSED. TYPE OF CONTROL- CONVENTIONAL MAX. GRINDING DIAMETER 400 MM GRINDING WIDTH 75 MM MODULE 6-14 ROOT CIRCLE DIA. MIN. 64 MM NUMBER OF TEETH 13 - 300 ROLL DIAMETER -TOOLPIECES 73 / 380 MM MAX. HELIX ANGLE +/- 50 /55 ° PRESSURE ANGLE 5 / 24 ° DIMENSIONS OF GRINDING WHEEL 660 / 762 MM GRINDING WHEEL SPEEDS 400- 1000 U/MIN TOTAL POWER REQUIREMENT 10 KVA WEIGHT OF THE MACHINE CA. 5 T DIMENSIONS OF THE MACHINE CA. 2 X 2,25 X 2,45 M
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Precio: 11.000 €
Ubicación: Land-[nothing to translate] [NOTHING TO TRANSLATE]
Vendedor: SENER MASCHINEN
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)