41 ofertas

Año de construcción: usado
Ubicación: Land-1,650 to husky injection molding machine built in 2002 in excellent condition!
with robot husky and many extras! can be seen under power! 1,650 TO HUSKY INJECTION MOLDING MACHINE BUILT IN 2002 IN EXCELLENT CONDITION! WITH ROBOT HUSKY AND MANY EXTRAS! CAN BE SEEN UNDER POWER!
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-working width: 1250 mm<br/>maximum length of workpieces 3500 mm<br/>feed speed 2.4 - 7.5 m / min<br/><br/>finishing line consisting of the following elements:<br/>- infeed conveyor<br/>- brush sander with 4 transversal brusches<br/>- brush sander with 2 longitudinal brushes<br/>- dust removal with brush and blowers<br/>- spray cabin rotoclean g8<br/>   rotating arm with 8 pistols<br/>   workpiece recognition for saving paint<br/>   workpiece transport with steel belts<br/>   recuperation and cleaning steel belts<br/>   air cleaning with water curtain<br/>- 3 lacquer pumps graco 015.085<br/>- 7 pumps for color stain graco husky 515<br/>- intermediate conveyor<br/>- cross transport with rods and overhead hot air dryer<br/>- intermediate conveyor<br/>- drying tunnel with ir lamps<br/>- uv dryer with 2 lamps<br/>- outfeed conveyor WORKING WIDTH: 1250 MM
MAXIMUM LENGTH OF WORKPIECES 3500 MM
FEED SPEED 2.4 - 7.5 M / MIN

FINISHING LINE CONSISTING OF THE FOLLOWING ELEMENTS:
- INFEED CONVEYOR
- BRUSH SANDER WITH 4 TRANSVERSAL BRUSCHES
- BRUSH SANDER WITH 2 LONGITUDINAL BRUSHES
- DUST REMOVAL WITH BRUSH AND BLOWERS
- SPRAY CABIN ROTOCLEAN G8
   ROTATING ARM WITH 8 PISTOLS
   WORKPIECE RECOGNITION FOR SAVING PAINT
   WORKPIECE TRANSPORT WITH STEEL BELTS
   RECUPERATION AND CLEANING STEEL BELTS
   AIR CLEANING WITH WATER CURTAIN
- 3 LACQUER PUMPS GRACO 015.085
- 7 PUMPS FOR COLOR STAIN GRACO HUSKY 515
- INTERMEDIATE CONVEYOR
- CROSS TRANSPORT WITH RODS AND OVERHEAD HOT AIR DRYER
- INTERMEDIATE CONVEYOR
- DRYING TUNNEL WITH IR LAMPS
- UV DRYER WITH 2 LAMPS
- OUTFEED CONVEYOR
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-injection molding machine husky hylectric h300 for pet bottle closures
 
two complete pet bottle cap production lines both equipped with husky hylectric h300 injection molding machines. both production lines include italian plastic systems made granule pneumatic transport, mixing and feeding systems as well as green box made cap cooling drums. equipment was manufactured in year 2006 is designed to produce 28 mm pet caps according to standard light bpf 28 mm at speed of 36 000 caps / hour. both machines were stopped in 2014 but are still installed and powered.
 
technical data
 
machine #1 type: husky h300, rs95/80, ser. ?2853225
manufacturing year 2006, total operating hours 44918
mold no1 corvaglia 64 cavity no 28-22-21-1 air cooled

machine #2 type: husky h300, rs80/70, ser. ?3372564
manufacturing year 2006, total operating hours 57790
mold no 2 corvaglia 64 cavity no 103-a-st water cooled

cap format bpf 28 mm
cycle time: 6.3 seconds
capacity 36 000 cap / h
control system: beckfoff industrial pc
mmi polaris ttc 2100 with touch screen   INJECTION MOLDING MACHINE HUSKY HYLECTRIC H300 FOR PET BOTTLE CLOSURES TWO COMPLETE PET BOTTLE CAP PRODUCTION LINES BOTH EQUIPPED WITH HUSKY HYLECTRIC H300 INJECTION MOLDING MACHINES. BOTH PRODUCTION LINES INCLUDE ITALIAN PLASTIC SYSTEMS MADE GRANULE PNEUMATIC TRANSPORT, MIXING AND FEEDING SYSTEMS AS WELL AS GREEN BOX MADE CAP COOLING DRUMS. EQUIPMENT WAS MANUFACTURED IN YEAR 2006 IS DESIGNED TO PRODUCE 28 MM PET CAPS ACCORDING TO STANDARD LIGHT BPF 28 MM AT SPEED OF 36 000 CAPS / HOUR. BOTH MACHINES WERE STOPPED IN 2014 BUT ARE STILL INSTALLED AND POWERED. TECHNICAL DATA MACHINE #1 TYPE: HUSKY H300, RS95/80, SER. ?2853225 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 44918 MOLD NO1 CORVAGLIA 64 CAVITY NO 28-22-21-1 AIR COOLED MACHINE #2 TYPE: HUSKY H300, RS80/70, SER. ?3372564 MANUFACTURING YEAR 2006, TOTAL OPERATING HOURS 57790 MOLD NO 2 CORVAGLIA 64 CAVITY NO 103-A-ST WATER COOLED CAP FORMAT BPF 28 MM CYCLE TIME: 6.3 SECONDS CAPACITY 36 000 CAP / H CONTROL SYSTEM: BECKFOFF INDUSTRIAL PC MMI POLARIS TTC 2100 WITH TOUCH SCREEN
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 650 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-injection molding machine for pet preforms, husky g 600 pet, year 2000
 
this is a complete preform production line from granule feeding to readymade pet bottle preform conveyor. the equipment was made by husky injection molding systems s. a. (spain) on year 2000 and started to manufacture in 2001. the human-machine interface is an ibm-compatible pc. the nominal capacity of 19000 preform with weight 44 gram for 1.5-liter pet bottles. neck format is light bpf . equipment is on good condition and ready for delivery.
 
the delivery includes:
- injection molding machine g 600 pet p120/130 e 140 husky
- dispenser of the dye mdt3/c piovan
- air conditioner piovan
- water circulation pump gp 1art 1x37 piovan
- vacuum pump f316 / 2 piovan
- granulate desiccant ds 531 piovan
- cooler rpn 1500 piovan
- in / out conveyors
- control instrumentation and control box
 
manufacturer: husky injection molding systems s. a.
manufacturers type: g 600 pet p/120/130 e140
manufacturer year: 2000
capacity: 19000 preforms/hour
number of molds: 96
current preform size: 44 grams for 1.5-liter pet
clamping force: 600 tons
clamping cycle time: 15 seconds
current neck format: light bpf   INJECTION MOLDING MACHINE FOR PET PREFORMS, HUSKY G 600 PET, YEAR 2000 THIS IS A COMPLETE PREFORM PRODUCTION LINE FROM GRANULE FEEDING TO READYMADE PET BOTTLE PREFORM CONVEYOR. THE EQUIPMENT WAS MADE BY HUSKY INJECTION MOLDING SYSTEMS S. A. (SPAIN) ON YEAR 2000 AND STARTED TO MANUFACTURE IN 2001. THE HUMAN-MACHINE INTERFACE IS AN IBM-COMPATIBLE PC. THE NOMINAL CAPACITY OF 19000 PREFORM WITH WEIGHT 44 GRAM FOR 1.5-LITER PET BOTTLES. NECK FORMAT IS LIGHT BPF . EQUIPMENT IS ON GOOD CONDITION AND READY FOR DELIVERY. THE DELIVERY INCLUDES: - INJECTION MOLDING MACHINE G 600 PET P120/130 E 140 HUSKY - DISPENSER OF THE DYE MDT3/C PIOVAN - AIR CONDITIONER PIOVAN - WATER CIRCULATION PUMP GP 1ART 1X37 PIOVAN - VACUUM PUMP F316 / 2 PIOVAN - GRANULATE DESICCANT DS 531 PIOVAN - COOLER RPN 1500 PIOVAN - IN / OUT CONVEYORS - CONTROL INSTRUMENTATION AND CONTROL BOX MANUFACTURER: HUSKY INJECTION MOLDING SYSTEMS S. A. MANUFACTURERS TYPE: G 600 PET P/120/130 E140 MANUFACTURER YEAR: 2000 CAPACITY: 19000 PREFORMS/HOUR NUMBER OF MOLDS: 96 CURRENT PREFORM SIZE: 44 GRAMS FOR 1.5-LITER PET CLAMPING FORCE: 600 TONS CLAMPING CYCLE TIME: 15 SECONDS CURRENT NECK FORMAT: LIGHT BPF
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-closing pressure: 36500 kn<br/>clamping plate: 3480 x 3090 mm<br/>cylinder head volume: 14152 cm³<br/>injection pressure: 1925 bar<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> CLOSING PRESSURE: 36500 KN
CLAMPING PLATE: 3480 X 3090 MM
CYLINDER HEAD VOLUME: 14152 CM³
INJECTION PRESSURE: 1925 BAR



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-injection moulding machine for preforms
hypet 400 hpp 4.0 p120/120 ee 120
96 cavities
preform weight (max): 11,3 g
neck type: 29/25
 INJECTION MOULDING MACHINE FOR PREFORMS HYPET 400 HPP 4.0 P120/120 EE 120 96 CAVITIES PREFORM WEIGHT (MAX): 11,3 G NECK TYPE: 29/25
Vendedor: MachinePoint
Año de construcción: usado
Ubicación: Land-screw size:115 mm<br/>injection shot weight in polysterol:5858 g<br/>clamping force:20000 kn<br/>: <br/>injection unit: <br/>screw size:115 mm<br/>max. swept volumne:6.232 cm³<br/>injection shot weight in polysterol:5.858 g/ps<br/>injection pressure:2.205 bar<br/>clamping unit: <br/>closing pressure:2.000 t<br/>tie bar distance:1.900  x 1.500 mm<br/>mould hight - min.:1.000 mm<br/>mould hight - max.:1.700 mm<br/>opening stroke:2.600 mm<br/>control: <br/>microprocessor control:polaris <br/>screen text:deutsch / german <br/>manual:deutsch / german <br/>equipment: <br/>robot interface: <br/>core pull:4 <br/>without hopper / without water distributor:ohne <br/>other datas: <br/>pump drive power:233,2 kw<br/>pump drive rating: a<br/>cilinder heating capacity:78 kw<br/>cilinder heating capacity: a<br/>capacity hot runner: a<br/>dimension clamping unit l x w x h: m<br/>dimension injection unit l x w x h: m<br/>:14,3 x 4,3 x 3,6 m<br/>total weight:111.000 kg<br/><br/> payment terms: 50% with order, 50% prior to delivery SCREW SIZE:115 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:5858 G
CLAMPING FORCE:20000 KN
:
INJECTION UNIT:
SCREW SIZE:115 MM
MAX. SWEPT VOLUMNE:6.232 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:5.858 G/PS
INJECTION PRESSURE:2.205 BAR
CLAMPING UNIT:
CLOSING PRESSURE:2.000 T
TIE BAR DISTANCE:1.900 X 1.500 MM
MOULD HIGHT - MIN.:1.000 MM
MOULD HIGHT - MAX.:1.700 MM
OPENING STROKE:2.600 MM
CONTROL:
MICROPROCESSOR CONTROL:POLARIS
SCREEN TEXT:DEUTSCH / GERMAN
MANUAL:DEUTSCH / GERMAN
EQUIPMENT:
ROBOT INTERFACE:
CORE PULL:4
WITHOUT HOPPER / WITHOUT WATER DISTRIBUTOR:OHNE
OTHER DATAS:
PUMP DRIVE POWER:233,2 KW
PUMP DRIVE RATING: A
CILINDER HEATING CAPACITY:78 KW
CILINDER HEATING CAPACITY: A
CAPACITY HOT RUNNER: A
DIMENSION CLAMPING UNIT L X W X H: M
DIMENSION INJECTION UNIT L X W X H: M
:14,3 X 4,3 X 3,6 M
TOTAL WEIGHT:111.000 KG

PAYMENT TERMS: 50% WITH ORDER, 50% PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Año de construcción: usado
Ubicación: Land-fully refurbished and ready to install calzoni motor for husky lx300 & xl300 ton pet machines

riva calzoni oleodinamica
mr3600
pn (bar) 250
made in italy

more than one available
exworks miami and south america
call for details
optimisense FULLY REFURBISHED AND READY TO INSTALL CALZONI MOTOR FOR HUSKY LX300 & XL300 TON PET MACHINES RIVA CALZONI OLEODINAMICA MR3600 PN (BAR) 250 MADE IN ITALY MORE THAN ONE AVAILABLE EXWORKS MIAMI AND SOUTH AMERICA CALL FOR DETAILS OPTIMISENSE
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-fully refurbished and ready to install calzoni motor for husky sx600 ton pet machine

riva calzoni oleodinamica
mr6500m
pn (bar) 250
made in italy

more than one available
exworks miami and south america
call for details
optimisense   FULLY REFURBISHED AND READY TO INSTALL CALZONI MOTOR FOR HUSKY SX600 TON PET MACHINE RIVA CALZONI OLEODINAMICA MR6500M PN (BAR) 250 MADE IN ITALY MORE THAN ONE AVAILABLE EXWORKS MIAMI AND SOUTH AMERICA CALL FOR DETAILS OPTIMISENSE
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-for sale once in a lifetime 13800 working hours hypet 300
year 2006 husky pet 72 cavities hypet 300ton model p100/110 e120

full system
water chiler, resin dryer, dehumidifier, and complete mold 72 cavities pco 26g with hot runner
dismantle, commissioning and startup also available upon request
400v 50hz
availability: immediate
exworks asia
only 13800 hours on it, almost 20 months   FOR SALE ONCE IN A LIFETIME 13800 WORKING HOURS HYPET 300 YEAR 2006 HUSKY PET 72 CAVITIES HYPET 300TON MODEL P100/110 E120 FULL SYSTEM WATER CHILER, RESIN DRYER, DEHUMIDIFIER, AND COMPLETE MOLD 72 CAVITIES PCO 26G WITH HOT RUNNER DISMANTLE, COMMISSIONING AND STARTUP ALSO AVAILABLE UPON REQUEST 400V 50HZ AVAILABILITY: IMMEDIATE EXWORKS ASIA ONLY 13800 HOURS ON IT, ALMOST 20 MONTHS
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-preform-injection molding system with the capacity to also produce heavier preforms (up to 55 g) on 72-cavity-tooling with the biggest injection unit on board available for this platform (extruder screw diam.140 mm. 
the PREFORM-INJECTION MOLDING SYSTEM WITH THE CAPACITY TO ALSO PRODUCE HEAVIER PREFORMS (UP TO 55 G) ON 72-CAVITY-TOOLING WITH THE BIGGEST INJECTION UNIT ON BOARD AVAILABLE FOR THIS PLATFORM (EXTRUDER SCREW DIAM.140 MM. THE "PACKAGE"INCLUDES: ONE RESIN DRYING AND DEHUMIDIFYING COMBO: DRYPACK, MODEL DP1100/11, WITH 6,500-L-SILO DESIGNED AND MADE BY EISBAER-TROCKENTECHNIK GMBH. THE COMBINATION NEEDS LESS POWER AND LESS SPACE AND IS EASIER TO SET UP.
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-preform injection molding machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g pet). complete process package includes: motan-resin dryer and eisbaer-dehumidifyer.maintained at top level availability (maintenance log) up to last shot before decommissioning in november. equipment set up for shipment in glocon. 32, 48 and 72-cav.-molds available. PREFORM INJECTION MOLDING MACHINE SIZED FOR PREFORM MOLDING TOOLS OF UP TO 72 CAVITIES @ 45 G UNIT WEIGHT. EQUIPPED WITH LARGE INJECTION UNIT (120-MM-EXTRUDER, 110-MM-SHOOTING POT FOR MAX.SHOTWEIGHT OF 3.344 G PET). COMPLETE PROCESS PACKAGE INCLUDES: MOTAN-RESIN DRYER AND EISBAER-DEHUMIDIFYER.MAINTAINED AT TOP LEVEL AVAILABILITY (MAINTENANCE LOG) UP TO LAST SHOT BEFORE DECOMMISSIONING IN NOVEMBER. EQUIPMENT SET UP FOR SHIPMENT IN GLOCON. 32, 48 AND 72-CAV.-MOLDS AVAILABLE.
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-preform injection molding machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g pet). complete process package includes: motan-resin dryer and eisbaer-dehumidifyer.maintained at top level availability (maintenance log) up to last shot before decommissioning in november. equipment set up for shipment in glocon. 32, 48 and 72-cav.-molds available.
  PREFORM INJECTION MOLDING MACHINE SIZED FOR PREFORM MOLDING TOOLS OF UP TO 72 CAVITIES @ 45 G UNIT WEIGHT. EQUIPPED WITH LARGE INJECTION UNIT (120-MM-EXTRUDER, 110-MM-SHOOTING POT FOR MAX.SHOTWEIGHT OF 3.344 G PET). COMPLETE PROCESS PACKAGE INCLUDES: MOTAN-RESIN DRYER AND EISBAER-DEHUMIDIFYER.MAINTAINED AT TOP LEVEL AVAILABILITY (MAINTENANCE LOG) UP TO LAST SHOT BEFORE DECOMMISSIONING IN NOVEMBER. EQUIPMENT SET UP FOR SHIPMENT IN GLOCON. 32, 48 AND 72-CAV.-MOLDS AVAILABLE.
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-husky used pet preform mold in good working order
cavities 48
neck finish pco 28mm 1816
weight: 52.10 grams
48 cav hot runner: also available (contact us)   HUSKY USED PET PREFORM MOLD IN GOOD WORKING ORDER CAVITIES 48 NECK FINISH PCO 28MM 1816 WEIGHT: 52.10 GRAMS 48 CAV HOT RUNNER: ALSO AVAILABLE (CONTACT US)
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-husky used pet preform mold in good working order
cavities 48
neck finish pco 28mm 1816
weight: 43.02 grams
48 cav hot runner: also available (contact us) HUSKY USED PET PREFORM MOLD IN GOOD WORKING ORDER CAVITIES 48 NECK FINISH PCO 28MM 1816 WEIGHT: 43.02 GRAMS 48 CAV HOT RUNNER: ALSO AVAILABLE (CONTACT US)
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-husky used pet preform mold in good working order
cavities 48
neck finish pco 28mm 1816
weight:27.71 grams
48 cav hot runner: also available (contact us)
  HUSKY USED PET PREFORM MOLD IN GOOD WORKING ORDER CAVITIES 48 NECK FINISH PCO 28MM 1816 WEIGHT:27.71 GRAMS 48 CAV HOT RUNNER: ALSO AVAILABLE (CONTACT US)
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-thermoformeusse pozzo 
format : 700x500mm
année : 1995
emboutissage: 280 mm
équipée d'un massicot

elle est adaptée au prototypage, petites et moyennes series
utilisation de toutes les matières thermoformables

machine pour la production de pièces plastiques comme :
-emballage legers, blisters
emballages pharmaceutiques
emballages alimentaires
plateaux de manutention
callages techniques et robotiques
presentoirs pour plv
capots de machines
skin pack


illig, kiefel, arburg, battenfeld, billion, demag, dk, engel, fischer, husky, ads, krauss maffei, margarit, negri bossi, netstal, sandretto, windsor, amut, andouard, baston, samafor, tecnova, vobau, illig, cb concept, automa, bekum, krupp, magic, mag, putian, sipa,uniloy comec etc.

snvi energy graphic sasu
siÈge social : 22 rue du camp - 93230 romainville - france 
tel : 01 57 14 99 19 / mobile : 06 88 07 09 64  

 THERMOFORMEUSSE POZZO FORMAT : 700X500MM ANNéE : 1995 EMBOUTISSAGE: 280 MM éQUIPéE D'UN MASSICOT ELLE EST ADAPTéE AU PROTOTYPAGE, PETITES ET MOYENNES SERIES UTILISATION DE TOUTES LES MATIèRES THERMOFORMABLES MACHINE POUR LA PRODUCTION DE PIèCES PLASTIQUES COMME : -EMBALLAGE LEGERS, BLISTERS EMBALLAGES PHARMACEUTIQUES EMBALLAGES ALIMENTAIRES PLATEAUX DE MANUTENTION CALLAGES TECHNIQUES ET ROBOTIQUES PRESENTOIRS POUR PLV CAPOTS DE MACHINES SKIN PACK ILLIG, KIEFEL, ARBURG, BATTENFELD, BILLION, DEMAG, DK, ENGEL, FISCHER, HUSKY, ADS, KRAUSS MAFFEI, MARGARIT, NEGRI BOSSI, NETSTAL, SANDRETTO, WINDSOR, AMUT, ANDOUARD, BASTON, SAMAFOR, TECNOVA, VOBAU, ILLIG, CB CONCEPT, AUTOMA, BEKUM, KRUPP, MAGIC, MAG, PUTIAN, SIPA,UNILOY COMEC ETC. SNVI ENERGY GRAPHIC SASU SIÈGE SOCIAL : 22 RUE DU CAMP - 93230 ROMAINVILLE - FRANCE TEL : 01 57 14 99 19 / MOBILE : 06 88 07 09 64
Vendedor: SNVI ENERGY
Año de construcción: usado
Ubicación: Land-edible oil preform mould
cavities: 32
product 1,5 liters 
neck finish 29mm
working hours: 43.843 hours
preform weight: 41 grams + core set for 36 grams
husky gline and xline compatible   EDIBLE OIL PREFORM MOULD CAVITIES: 32 PRODUCT 1,5 LITERS NECK FINISH 29MM WORKING HOURS: 43.843 HOURS PREFORM WEIGHT: 41 GRAMS + CORE SET FOR 36 GRAMS HUSKY GLINE AND XLINE COMPATIBLE
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-edible oil preform mould
cavities: 32 
product 1 liter 
neck finish 36mm
working hours: 20.207 hours
preform weight: 31.5 grams
husky gline and xline compatible  EDIBLE OIL PREFORM MOULD CAVITIES: 32 PRODUCT 1 LITER NECK FINISH 36MM WORKING HOURS: 20.207 HOURS PREFORM WEIGHT: 31.5 GRAMS HUSKY GLINE AND XLINE COMPATIBLE
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-edible oil preform mould
cavities: 32
product 1.5 liters 
neck finish 36mm
working hours: 51.486 hours
preform weight: 42 grams
husky gline and xline compatible   EDIBLE OIL PREFORM MOULD CAVITIES: 32 PRODUCT 1.5 LITERS NECK FINISH 36MM WORKING HOURS: 51.486 HOURS PREFORM WEIGHT: 42 GRAMS HUSKY GLINE AND XLINE COMPATIBLE
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-husky hypet 300 72-cavity preform injection moulding system, year 2007

consisting of:
* husky hypet 300 p100/110 e120 preform injection moulding machine
* plastic systems resin dryer
* plastic systems material hopper
* plastic systems mould dehumidifier
* plastic systems material vacuum blower
* plastic systems outfeed conveyor
* 72-cavity husky hot runner

working hours: tbc.

system is in good working condition, well maintained and can be inspected in production until february 2019.
 HUSKY HYPET 300 72-CAVITY PREFORM INJECTION MOULDING SYSTEM, YEAR 2007 CONSISTING OF: * HUSKY HYPET 300 P100/110 E120 PREFORM INJECTION MOULDING MACHINE * PLASTIC SYSTEMS RESIN DRYER * PLASTIC SYSTEMS MATERIAL HOPPER * PLASTIC SYSTEMS MOULD DEHUMIDIFIER * PLASTIC SYSTEMS MATERIAL VACUUM BLOWER * PLASTIC SYSTEMS OUTFEED CONVEYOR * 72-CAVITY HUSKY HOT RUNNER WORKING HOURS: TBC. SYSTEM IS IN GOOD WORKING CONDITION, WELL MAINTAINED AND CAN BE INSPECTED IN PRODUCTION UNTIL FEBRUARY 2019.
Vendedor: IPR-PETMachinery
Año de construcción: usado
Ubicación: Land-injection molding machine for pet preforms, husky g 600 pet 
  
this is a complete preform production line from granule feeding to readymade pet bottle preform conveyor. the equipment was made by spanish husky injection molding systems s.a on year 2005 and it has a nominal capacity of 18600 preform with weight 44 gram for 1.5 liter pet bottles. neck format is 28 mm light bpf - see attached preform format. 
  
the equipment was upgraded on 2012 with complete new hmi control panel which contains ibm compatible pc, new software and complete machine went through thorough service by husky. the line was closed in 2014 and has kept installed and in warm condition.  equipment is in very good operational condition. 
  
the delivery includes 
- granule feeding system with a box tipper, hoper and air conveying system 
- granule drying and handling system 
- injection molding machine 
- mold cooling compressors and evaporative coolers 
- hot runner 
- 3-sectional robot 
 
technical data:
 
manufacturer:                         husky injection molding systems s.a
machine type:                        g 600 pet p/120/130 e140
manufacturing year:               2005 
total operating hours:            60312  
clamping force:                     600 tons
mold for:                                96 preforms 
clamping cycle:                     18 seconds
nominal capacity                   18600 preforms/hour  
current mold for                    44 gram 1.5 liter pet
current neck format:              light bpf – 28 mm     
 
 INJECTION MOLDING MACHINE FOR PET PREFORMS, HUSKY G 600 PET THIS IS A COMPLETE PREFORM PRODUCTION LINE FROM GRANULE FEEDING TO READYMADE PET BOTTLE PREFORM CONVEYOR. THE EQUIPMENT WAS MADE BY SPANISH HUSKY INJECTION MOLDING SYSTEMS S.A ON YEAR 2005 AND IT HAS A NOMINAL CAPACITY OF 18600 PREFORM WITH WEIGHT 44 GRAM FOR 1.5 LITER PET BOTTLES. NECK FORMAT IS 28 MM LIGHT BPF - SEE ATTACHED PREFORM FORMAT. THE EQUIPMENT WAS UPGRADED ON 2012 WITH COMPLETE NEW HMI CONTROL PANEL WHICH CONTAINS IBM COMPATIBLE PC, NEW SOFTWARE AND COMPLETE MACHINE WENT THROUGH THOROUGH SERVICE BY HUSKY. THE LINE WAS CLOSED IN 2014 AND HAS KEPT INSTALLED AND IN WARM CONDITION. EQUIPMENT IS IN VERY GOOD OPERATIONAL CONDITION. THE DELIVERY INCLUDES - GRANULE FEEDING SYSTEM WITH A BOX TIPPER, HOPER AND AIR CONVEYING SYSTEM - GRANULE DRYING AND HANDLING SYSTEM - INJECTION MOLDING MACHINE - MOLD COOLING COMPRESSORS AND EVAPORATIVE COOLERS - HOT RUNNER - 3-SECTIONAL ROBOT TECHNICAL DATA: MANUFACTURER: HUSKY INJECTION MOLDING SYSTEMS S.A MACHINE TYPE: G 600 PET P/120/130 E140 MANUFACTURING YEAR: 2005 TOTAL OPERATING HOURS: 60312 CLAMPING FORCE: 600 TONS MOLD FOR: 96 PREFORMS CLAMPING CYCLE: 18 SECONDS NOMINAL CAPACITY 18600 PREFORMS/HOUR CURRENT MOLD FOR 44 GRAM 1.5 LITER PET CURRENT NECK FORMAT: LIGHT BPF – 28 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-injection molding machine husky t 225
year of construction: 1988
clamping force: 2250 kn INJECTION MOLDING MACHINE HUSKY T 225 YEAR OF CONSTRUCTION: 1988 CLAMPING FORCE: 2250 KN
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-husky moog servo valve hpn 4952777 
compatible with later hypet & hylectric injection molding machines, hypets 4.0 & 5.0, used in working order
6 months warranty
(1) piece in stock HUSKY MOOG SERVO VALVE HPN 4952777 COMPATIBLE WITH LATER HYPET & HYLECTRIC INJECTION MOLDING MACHINES, HYPETS 4.0 & 5.0, USED IN WORKING ORDER 6 MONTHS WARRANTY (1) PIECE IN STOCK
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-high-productivity second hand 48-cavity mold  for production of one-piece 28-mm-screw closures for pet-bottles with pco1881-neck finish – mold consists of plates made of high resistance and special steel. hotrunner by  husky. 
the threaded cores, injection inserts and central extractors are manufactured in special copper alloy. the balance of the elements of which the cavities consist are made of special steel resistant to forces from top performance and consistent functionality.
the efficient internal cooling system facilitates optimal heat transfer/exchange between the components of the cavity and the plastics mass of the closure and thus  - supported by the high speed capacity of the bmb kw 28pi/2200 - achieves cycle times of below 5 s
 HIGH-PRODUCTIVITY SECOND HAND 48-CAVITY MOLD FOR PRODUCTION OF ONE-PIECE 28-MM-SCREW CLOSURES FOR PET-BOTTLES WITH PCO1881-NECK FINISH – MOLD CONSISTS OF PLATES MADE OF HIGH RESISTANCE AND SPECIAL STEEL. HOTRUNNER BY HUSKY. THE THREADED CORES, INJECTION INSERTS AND CENTRAL EXTRACTORS ARE MANUFACTURED IN SPECIAL COPPER ALLOY. THE BALANCE OF THE ELEMENTS OF WHICH THE CAVITIES CONSIST ARE MADE OF SPECIAL STEEL RESISTANT TO FORCES FROM TOP PERFORMANCE AND CONSISTENT FUNCTIONALITY. THE EFFICIENT INTERNAL COOLING SYSTEM FACILITATES OPTIMAL HEAT TRANSFER/EXCHANGE BETWEEN THE COMPONENTS OF THE CAVITY AND THE PLASTICS MASS OF THE CLOSURE AND THUS - SUPPORTED BY THE HIGH SPEED CAPACITY OF THE BMB KW 28PI/2200 - ACHIEVES CYCLE TIMES OF BELOW 5 S
Vendedor: GloCon TST GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: husky
model: e2700 rs140/140
iuclid: 2700 tonnes
manufacturing year: 1996
max pressure: 1495
intensification: 9236
screw diameter inches: 5.51
max stroke: 23.62 inches
max injection speed: 3.9 inches
tie bars hxv: 1700
the vertical bar: 2150
hxv;: 2600x3050
die height: 1000-1900
daylight: 2900
clamp style: hydraulic quick mould change    MANUFACTURER: HUSKY MODEL: E2700 RS140/140 IUCLID: 2700 TONNES MANUFACTURING YEAR: 1996 MAX PRESSURE: 1495 INTENSIFICATION: 9236 SCREW DIAMETER INCHES: 5.51 MAX STROKE: 23.62 INCHES MAX INJECTION SPEED: 3.9 INCHES TIE BARS HXV: 1700 THE VERTICAL BAR: 2150 HXV;: 2600X3050 DIE HEIGHT: 1000-1900 DAYLIGHT: 2900 CLAMP STYLE: HYDRAULIC QUICK MOULD CHANGE
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-husky g600 96-cavity pet preform injection moulding system, year 2003

consisting of:
* husky g600 p120/130 e140 preform injection moulding machine
* 3-stage husky take out robot
* pet resin dryer and hopper
* 96 cavity preform mould for 20-22g 38mm 3-start preforms
– pitch 152×60

technical details:
– max. shot weight : 5,575 cm3 – 5,076 gm
– max. throughput : 840 kg/h
– working hours : 24,200 hrs (end december 2017)

in good condition. system will be available in week 30, 2018. can be inspected in production until then. HUSKY G600 96-CAVITY PET PREFORM INJECTION MOULDING SYSTEM, YEAR 2003 CONSISTING OF: * HUSKY G600 P120/130 E140 PREFORM INJECTION MOULDING MACHINE * 3-STAGE HUSKY TAKE OUT ROBOT * PET RESIN DRYER AND HOPPER * 96 CAVITY PREFORM MOULD FOR 20-22G 38MM 3-START PREFORMS – PITCH 152×60 TECHNICAL DETAILS: – MAX. SHOT WEIGHT : 5,575 CM3 – 5,076 GM – MAX. THROUGHPUT : 840 KG/H – WORKING HOURS : 24,200 HRS (END DECEMBER 2017) IN GOOD CONDITION. SYSTEM WILL BE AVAILABLE IN WEEK 30, 2018. CAN BE INSPECTED IN PRODUCTION UNTIL THEN.
Vendedor: IPR-PETMachinery
Año de construcción: usado
Ubicación: Land-*specification
-clamping force : 3150 ton
-screw diameter : 150/120mm
-injection weight : 12720/6450?g
-daylight : 5500mm
-clamping stroke : 3600mm
-tie abr distance : 2240 x 1800mm
-manufactured year : 2012
 *SPECIFICATION -CLAMPING FORCE : 3150 TON -SCREW DIAMETER : 150/120MM -INJECTION WEIGHT : 12720/6450?G -DAYLIGHT : 5500MM -CLAMPING STROKE : 3600MM -TIE ABR DISTANCE : 2240 X 1800MM -MANUFACTURED YEAR : 2012
Vendedor: TMS CO.,LTD
Año de construcción: usado
Ubicación: Land-xycom hmi 9450 husky hpn 705922 husky xline machines as xl300 lx300 sx500 sx600  and others. exworks miami usa 
contact us: j.plaul@optimisense 
whatsapp +5491157143569 
usa mobile +1.305.831.8888 XYCOM HMI 9450 HUSKY HPN 705922 HUSKY XLINE MACHINES AS XL300 LX300 SX500 SX600 AND OTHERS. EXWORKS MIAMI USA CONTACT US: J.PLAUL@OPTIMISENSE WHATSAPP +5491157143569 USA MOBILE +1.305.831.8888
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-husky hpn 726619

for sale xycom 9960 operator station hmi for husky g-line, index-line & others pet preforms injection molding machines. 
exworks miami usa 

contact us: j.plaul@optimisense 
whatsapp +5491157143569 
us mobile +1.305.831.8888 
skype: optimisense 

for more info and pictures join our fb group husky used pet preforms related machinery  HUSKY HPN 726619 FOR SALE XYCOM 9960 OPERATOR STATION HMI FOR HUSKY G-LINE, INDEX-LINE & OTHERS PET PREFORMS INJECTION MOLDING MACHINES. EXWORKS MIAMI USA CONTACT US: J.PLAUL@OPTIMISENSE WHATSAPP +5491157143569 US MOBILE +1.305.831.8888 SKYPE: OPTIMISENSE FOR MORE INFO AND PICTURES JOIN OUR FB GROUP HUSKY USED PET PREFORMS RELATED MACHINERY
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-the color shading in hardware consisting of automatic auricolor so tinting machine, large quantities of pasta to administer two lv-dosing units, pc-based control unit, as well as equipment for intersections between lines. shading equipment is made in accordance with the standards en 50014 and en 50016 and meets the explosion classification eex p ii t3. (the device is equipped with a fan, supply and exhaust pipes and pressure sensor to achieve a permanent vacuum supply to the pipe and well-ventilated.)

1 pack of tinting station lv-s18519
-contains 10 pieces 20-liter and 10 liter stainless steel tanks for 15
-the pump return 0.8 litres/min
-automatic nozzle shut-off
-ohjauselectroniikka sa801, sa903 and sa704

2 x lv-dosing units
with frame structure
-tank capacity 150 litres
-pasta hl4625, 0.37 kw pump viking – approx. 5 l/min, eex rated
-blade mixer helical motor, inverter, vem rmi63 0.37 kw to approx. 20 fl, rpm
-pasta with the surface of the upper and lower limits of the sensors
-mass flow meter for micro motion fo 50 sr. 11 sz, eex-rated
-mass flow meter elite remote rf 79739 (d) 4ebc
-tank fill pump husky 515, pneumatic

1 piece control unit which belongs to the fujitsu scenic pc, fujitsu 15 THE COLOR SHADING IN HARDWARE CONSISTING OF AUTOMATIC AURICOLOR SO TINTING MACHINE, LARGE QUANTITIES OF PASTA TO ADMINISTER TWO LV-DOSING UNITS, PC-BASED CONTROL UNIT, AS WELL AS EQUIPMENT FOR INTERSECTIONS BETWEEN LINES. SHADING EQUIPMENT IS MADE IN ACCORDANCE WITH THE STANDARDS EN 50014 AND EN 50016 AND MEETS THE EXPLOSION CLASSIFICATION EEX P II T3. (THE DEVICE IS EQUIPPED WITH A FAN, SUPPLY AND EXHAUST PIPES AND PRESSURE SENSOR TO ACHIEVE A PERMANENT VACUUM SUPPLY TO THE PIPE AND WELL-VENTILATED.) 1 PACK OF TINTING STATION LV-S18519 -CONTAINS 10 PIECES 20-LITER AND 10 LITER STAINLESS STEEL TANKS FOR 15 -THE PUMP RETURN 0.8 LITRES/MIN -AUTOMATIC NOZZLE SHUT-OFF -OHJAUSELECTRONIIKKA SA801, SA903 AND SA704 2 X LV-DOSING UNITS WITH FRAME STRUCTURE -TANK CAPACITY 150 LITRES -PASTA HL4625, 0.37 KW PUMP VIKING – APPROX. 5 L/MIN, EEX RATED -BLADE MIXER HELICAL MOTOR, INVERTER, VEM RMI63 0.37 KW TO APPROX. 20 FL, RPM -PASTA WITH THE SURFACE OF THE UPPER AND LOWER LIMITS OF THE SENSORS -MASS FLOW METER FOR MICRO MOTION FO 50 SR. 11 SZ, EEX-RATED -MASS FLOW METER ELITE REMOTE RF 79739 (D) 4EBC -TANK FILL PUMP HUSKY 515, PNEUMATIC 1 PIECE CONTROL UNIT WHICH BELONGS TO THE FUJITSU SCENIC PC, FUJITSU 15 "DISPLAY, AND DISPENCE MANAGER – SOFTWARE THE HARDWARE MANUFACTURED BY CPS COLOR GROUP IN 2001, COROB OY, IN THE FRAMEWORK OF THE SERVICE CONTRACT OF THE DEVICE IS MAINTAINED IN ULVILA AND IT IS IN VERY GOOD CONDITION.
Vendedor: KKT oy
Año de construcción: usado
Ubicación: Land-husky hylectric 400 ton injection molding system 
model hl400 rs95/85 - aug 2004
(2) machines available, same model and year. 
working hours 70.000
robot krauss maffei lr-s 150 (optional)
400 volts 50 hz / polaris hmi
distance between columns height - width (mm): 920mm x 920mm
mold thickness min - max (mm): 500mm / 1120mm
mold max opening (mm): 1300mm
screw diameter (mm): 85mm
excellent condition, can be inspected on production. 

reasonable offers will be considered, with or without robots.
              HUSKY HYLECTRIC 400 TON INJECTION MOLDING SYSTEM MODEL HL400 RS95/85 - AUG 2004 (2) MACHINES AVAILABLE, SAME MODEL AND YEAR. WORKING HOURS 70.000 ROBOT KRAUSS MAFFEI LR-S 150 (OPTIONAL) 400 VOLTS 50 HZ / POLARIS HMI DISTANCE BETWEEN COLUMNS HEIGHT - WIDTH (MM): 920MM X 920MM MOLD THICKNESS MIN - MAX (MM): 500MM / 1120MM MOLD MAX OPENING (MM): 1300MM SCREW DIAMETER (MM): 85MM EXCELLENT CONDITION, CAN BE INSPECTED ON PRODUCTION. REASONABLE OFFERS WILL BE CONSIDERED, WITH OR WITHOUT ROBOTS.
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land- moog valve by husky injection molding machine, with open/close block, used, functional MOOG VALVE BY HUSKY INJECTION MOLDING MACHINE, WITH OPEN/CLOSE BLOCK, USED, FUNCTIONAL
Vendedor: Herr Peter Dango
Año de construcción: usado
Ubicación: Land-treif husky ce dual purpose cutting machine, precise dicing and cutting with one machine, automatic start-up device, cut dices, strips, slices and portions.

the machine is currently in the refurbishment and you are very welcome to test the machine at our office in koblenz, germany. 

 TREIF HUSKY CE DUAL PURPOSE CUTTING MACHINE, PRECISE DICING AND CUTTING WITH ONE MACHINE, AUTOMATIC START-UP DEVICE, CUT DICES, STRIPS, SLICES AND PORTIONS. THE MACHINE IS CURRENTLY IN THE REFURBISHMENT AND YOU ARE VERY WELCOME TO TEST THE MACHINE AT OUR OFFICE IN KOBLENZ, GERMANY.
Vendedor: DL Leasing 1988 GmbH & Co. KG
Año de construcción: usado
Precio: 3.000 €
Ubicación: Land-motor loher anwa-250me-04f
no. 3225457 in the b34
50 hz 74hp kw 74/100 hp
380/400 v 440 / 460
100/97 a 86/114
0.87/0.88 0.88 cosp
1478/1482 / min 1780/1773
ip54, 495kg
used

from husky injection moulding machine gl225rs 60/50 MOTOR LOHER ANWA-250ME-04F NO. 3225457 IN THE B34 50 HZ 74HP KW 74/100 HP 380/400 V 440 / 460 100/97 A 86/114 0.87/0.88 0.88 COSP 1478/1482 / MIN 1780/1773 IP54, 495KG USED FROM HUSKY INJECTION MOULDING MACHINE GL225RS 60/50
Vendedor: Joko Spezialtiefbau
Año de construcción: usado
Precio: 4.000 €
Ubicación: Land-hydraulic pump combination - lande er unpowered
manufacturer brueninghaus hydromatik
hpn 716099
l a 10v 071dr/31r
psc12k07-s0420
part-no. 00979.110
year of construction 1998
179 bar
used

from husky injection moulding machine gl225rs60/50 HYDRAULIC PUMP COMBINATION - LANDE ER UNPOWERED MANUFACTURER BRUENINGHAUS HYDROMATIK HPN 716099 L A 10V 071DR/31R PSC12K07-S0420 PART-NO. 00979.110 YEAR OF CONSTRUCTION 1998 179 BAR USED FROM HUSKY INJECTION MOULDING MACHINE GL225RS60/50
Vendedor: Joko Spezialtiefbau
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-hydraulic radial engine
manufacturer denison/calzoni
type mr300d - f1n1n2s2nx
0401 / 46529, 742056
250 bar
used

from husky injection moulding machine type gl225 rs60/50 HYDRAULIC RADIAL ENGINE MANUFACTURER DENISON/CALZONI TYPE MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 BAR USED FROM HUSKY INJECTION MOULDING MACHINE TYPE GL225 RS60/50
Vendedor: Joko Spezialtiefbau
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-hydraulic radial engine manufacturer calzoni
mr. 3000-f1n1n2s2nx
0401 / 46528, 656592
250 bar
used

husky injection moulding machine, type gl225rs60/50 HYDRAULIC RADIAL ENGINE MANUFACTURER CALZONI MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 BAR USED HUSKY INJECTION MOULDING MACHINE, TYPE GL225RS60/50
Vendedor: Joko Spezialtiefbau
Año de construcción: usado
Ubicación: Land-used injection molding machine with siemens controller,
manufacturer of husky

data plate:
load supply no. 1 400v
207 a, 50 hz, 3 p + n + pe system
biggest motor 110 a
total load heating 90 a
short circuit intermittent performance 35 ka
load supply nr 2

type of machine: lx225 rs60/50

relay individually on request.

the machine can be visited like after consultation with us. USED INJECTION MOLDING MACHINE WITH SIEMENS CONTROLLER, MANUFACTURER OF HUSKY DATA PLATE: LOAD SUPPLY NO. 1 400V 207 A, 50 HZ, 3 P + N + PE SYSTEM BIGGEST MOTOR 110 A TOTAL LOAD HEATING 90 A SHORT CIRCUIT INTERMITTENT PERFORMANCE 35 KA LOAD SUPPLY NR 2 TYPE OF MACHINE: LX225 RS60/50 RELAY INDIVIDUALLY ON REQUEST. THE MACHINE CAN BE VISITED LIKE AFTER CONSULTATION WITH US.
Vendedor: Joko Spezialtiefbau
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-used injection molding machine,
manufacturer of husky injection systems ltd.
type: gl225rs60/50
year of constr.: 23.04.1998
400 v, 96 a greatest engine, 42 a total load heating
functional

the machine can be visited like us.

price: 8.000,00 plus vat, from stock
sale even after parts possible USED INJECTION MOLDING MACHINE, MANUFACTURER OF HUSKY INJECTION SYSTEMS LTD. TYPE: GL225RS60/50 YEAR OF CONSTR.: 23.04.1998 400 V, 96 A GREATEST ENGINE, 42 A TOTAL LOAD HEATING FUNCTIONAL THE MACHINE CAN BE VISITED LIKE US. PRICE: 8.000,00 PLUS VAT, FROM STOCK SALE EVEN AFTER PARTS POSSIBLE
Vendedor: Joko Spezialtiefbau
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HUSKY types: