3452 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-core d20a, lathe comes from a training workshop (total 3 machines are available of this type) state very well, with
guard / not cleaned off and glass scales and digital display of mitutoyo, central lubrication system, guided tours and refinished, dovetail guides at the flat after scraped, set games.
mechanics tested new, paint, chip wall back, chip tray below, guard with emergency off, tailstock, 3 jaw chuck, little water, chuck key, lighting
tip height 200 mm, centre distance 1000 mm, max.drehdurchmesser 600 mm, over bed 420 mm, over carriage bed width 260 mm, 300 mm,.
sale only to professionals
used, tested - so how you is, can be tested under power and visited
under exclusion of any warranty and guarantee there second-hand machine

free loading on trucks from location, shipment arrangement, placement and set up on request possible
available immediately CORE D20A, LATHE COMES FROM A TRAINING WORKSHOP (TOTAL 3 MACHINES ARE AVAILABLE OF THIS TYPE) STATE VERY WELL, WITH GUARD / NOT CLEANED OFF AND GLASS SCALES AND DIGITAL DISPLAY OF MITUTOYO, CENTRAL LUBRICATION SYSTEM, GUIDED TOURS AND REFINISHED, DOVETAIL GUIDES AT THE FLAT AFTER SCRAPED, SET GAMES. MECHANICS TESTED NEW, PAINT, CHIP WALL BACK, CHIP TRAY BELOW, GUARD WITH EMERGENCY OFF, TAILSTOCK, 3 JAW CHUCK, LITTLE WATER, CHUCK KEY, LIGHTING TIP HEIGHT 200 MM, CENTRE DISTANCE 1000 MM, MAX.DREHDURCHMESSER 600 MM, OVER BED 420 MM, OVER CARRIAGE BED WIDTH 260 MM, 300 MM,. SALE ONLY TO PROFESSIONALS USED, TESTED - SO HOW YOU IS, CAN BE TESTED UNDER POWER AND VISITED UNDER EXCLUSION OF ANY WARRANTY AND GUARANTEE THERE SECOND-HAND MACHINE FREE LOADING ON TRUCKS FROM LOCATION, SHIPMENT ARRANGEMENT, PLACEMENT AND SET UP ON REQUEST POSSIBLE AVAILABLE IMMEDIATELY
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Ubicación: Land-automatic input belt -width 500 mm - speeds variabel\r\nlongitudinal + diagonal cutting\r\nmax. cutting height 75 mm, cap. ca. 150 cakes/h\r\n AUTOMATIC INPUT BELT -WIDTH 500 MM - SPEEDS VARIABEL\R\NLONGITUDINAL + DIAGONAL CUTTING\R\NMAX. CUTTING HEIGHT 75 MM, CAP. CA. 150 CAKES/H\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
  complete kimkay  bread plant

   manufacture of year :2015 COMPLETE KIMKAY BREAD PLANT MANUFACTURE OF YEAR :2015
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-longitudinal + diagonal cutting possible\r\nit is an auxiliary for a precise and accurately defined cut of bakery products on trays. LONGITUDINAL + DIAGONAL CUTTING POSSIBLE\R\NIT IS AN AUXILIARY FOR A PRECISE AND ACCURATELY DEFINED CUT OF BAKERY PRODUCTS ON TRAYS.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-ctx dz331 new continuous furnace

-for baking and cooking

-by infrared panels

-versatile applicable

-digital display

-93 â° c to 509 â° temperature

-1.00-60.00 minutes baking time.

-bandwidth 457 mm CTX DZ331 NEW CONTINUOUS FURNACE -FOR BAKING AND COOKING -BY INFRARED PANELS -VERSATILE APPLICABLE -DIGITAL DISPLAY -93 ° C TO 509 ° TEMPERATURE -1.00-60.00 MINUTES BAKING TIME. -BANDWIDTH 457 MM
Vendedor: BÄCKEREI-TECHNIK DIETER ZEH KG
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-hubkneter

make: kemper

model: f 30 sl (50 kg of dough)

-overtaken top

-with warranty HUBKNETER MAKE: KEMPER MODEL: F 30 SL (50 KG OF DOUGH) -OVERTAKEN TOP -WITH WARRANTY
Vendedor: BÄCKEREI-TECHNIK DIETER ZEH KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 6570 kg<br/>throat: 2070/1170 mm<br/>boring diameter: 50/65 mm<br/>dimensions (l x w x h) approx.: 5740 x 4540 x 3440 mm<br/>bed plate surface area: 2610 x 1050 x 260 mm<br/>turning speed range: 16 - 800 rpm<br/>spindle taper: morse 5 <br/>feed range: 0,05 - 0,5 mm/r<br/>description: <h3>kovosvit vom 50 radial drilling machine</h3> <br> - machine no.: 150220020<br> <u>technical data:</u><br> <br> <h3>main dimensions:</h3> <br> - largest/smallest outreach from the shell surface to the spindle axis: 2070/1170 mm<br> - largest/smallest radius at spindle limit positions: 2270/1370 mm<br> - largest/smallest ground clearance of the spindle head in vertical position (with inserted spindle): 1555/305 mm<br> - carriage track on the bed guide: 1200 mm<br> - sheath diameter: 400 mm<br> <br> <h3>spindle:</h3> <br> - spindle head diameter: 75 mm<br> - spindle cone: morse 5<br> - spindle stroke: 350 mm<br> - number of spindle speed steps: 15<br> - highest spindle torque: 450 nm<br> <br> <h3>drive:</h3> <br> - drilling motor (power/speed): 4/1425 kw/n. min/-1<br> - hoist motor: 2.2/1420 kw/n. min/-1<br> - sledge travel motor: 1.1/1420 kw/n. min/-1<br> - total power consumption of the machine: 13 kva<br> WEIGHT APPROX.: 6570 KG
THROAT: 2070/1170 MM
BORING DIAMETER: 50/65 MM
DIMENSIONS (L X W X H) APPROX.: 5740 X 4540 X 3440 MM
BED PLATE SURFACE AREA: 2610 X 1050 X 260 MM
TURNING SPEED RANGE: 16 - 800 RPM
SPINDLE TAPER: MORSE 5
FEED RANGE: 0,05 - 0,5 MM/R
DESCRIPTION:

KOVOSVIT VOM 50 RADIAL DRILLING MACHINE


- MACHINE NO.: 150220020
TECHNICAL DATA:

MAIN DIMENSIONS:


- LARGEST/SMALLEST OUTREACH FROM THE SHELL SURFACE TO THE SPINDLE AXIS: 2070/1170 MM
- LARGEST/SMALLEST RADIUS AT SPINDLE LIMIT POSITIONS: 2270/1370 MM
- LARGEST/SMALLEST GROUND CLEARANCE OF THE SPINDLE HEAD IN VERTICAL POSITION (WITH INSERTED SPINDLE): 1555/305 MM
- CARRIAGE TRACK ON THE BED GUIDE: 1200 MM
- SHEATH DIAMETER: 400 MM

SPINDLE:


- SPINDLE HEAD DIAMETER: 75 MM
- SPINDLE CONE: MORSE 5
- SPINDLE STROKE: 350 MM
- NUMBER OF SPINDLE SPEED STEPS: 15
- HIGHEST SPINDLE TORQUE: 450 NM

DRIVE:


- DRILLING MOTOR (POWER/SPEED): 4/1425 KW/N. MIN/-1
- HOIST MOTOR: 2.2/1420 KW/N. MIN/-1
- SLEDGE TRAVEL MOTOR: 1.1/1420 KW/N. MIN/-1
- TOTAL POWER CONSUMPTION OF THE MACHINE: 13 KVA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-hubkneter

make; diosna

model: d 200a plus (200 kg of dough)

-flour dust cover, aushebekopf

-with 2 boilers

-top reconditioned light paint damage,

-warranty HUBKNETER MAKE; DIOSNA MODEL: D 200A PLUS (200 KG OF DOUGH) -FLOUR DUST COVER, AUSHEBEKOPF -WITH 2 BOILERS -TOP RECONDITIONED LIGHT PAINT DAMAGE, -WARRANTY
Vendedor: BÄCKEREI-TECHNIK DIETER ZEH KG
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 790 kg<br/>dimensions (l x w x h) approx.: 1100 x 1000 x 1500 mm<br/>description: zumberk 50 tn 12 spindle moulder<br> working table size 1000 x 900 mm<br> front carriage size 1000 x 270<br> sliding front carriage<br> axis diameter 50 mm<br> working speeds: 2<br> manual rising / lowering of the axis<br> motor power 4 kw<br> <, with automatic 2-wheeled feeder<br> feeding speeds: 8-10-16-20 m / min WEIGHT APPROX.: 790 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 1000 X 1500 MM
DESCRIPTION: ZUMBERK 50 TN 12 SPINDLE MOULDER
WORKING TABLE SIZE 1000 X 900 MM
FRONT CARRIAGE SIZE 1000 X 270
SLIDING FRONT CARRIAGE
AXIS DIAMETER 50 MM
WORKING SPEEDS: 2
MANUAL RISING / LOWERING OF THE AXIS
MOTOR POWER 4 KW
<, WITH AUTOMATIC 2-WHEELED FEEDER
FEEDING SPEEDS: 8-10-16-20 M / MIN
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-5 hl quantities 6 hl tank capacity steam jacket heating in the lauter tun and mash tank in addition electric heating for operation of the mash tank with 400v 32amp / 20kw heating elements (heating coil can be removed)
agitator in the mash tank e.g. for syrup making iced tea, etc.
hack work from marc function whirpoolfunktion sight glass in the pipes
lauter sight glass cip system ring nozzle anschwã¤nzen water
8cm mineral wool insulation steel sheet 3 mm inner tank
steel sheet 2 mm panel lasergeschnittenen lautering plate (removable)
marc lech to the off grains manholes with sight glass 2 x 0, 7kw agitator motors
adjustable kallotenfuss working platform between two tanks
plate cooler cooler spice 6 m 2 wort aeration eckrohrsieb(hopfensieb)
seasoning 2 x 5 m milk pipe dn 50 hose pump
stainless steel 304 l
 5 HL QUANTITIES 6 HL TANK CAPACITY STEAM JACKET HEATING IN THE LAUTER TUN AND MASH TANK IN ADDITION ELECTRIC HEATING FOR OPERATION OF THE MASH TANK WITH 400V 32AMP / 20KW HEATING ELEMENTS (HEATING COIL CAN BE REMOVED) AGITATOR IN THE MASH TANK E.G. FOR SYRUP MAKING ICED TEA, ETC. HACK WORK FROM MARC FUNCTION WHIRPOOLFUNKTION SIGHT GLASS IN THE PIPES LAUTER SIGHT GLASS CIP SYSTEM RING NOZZLE ANSCHW&ATILDE;&CURREN;NZEN WATER 8CM MINERAL WOOL INSULATION STEEL SHEET 3 MM INNER TANK STEEL SHEET 2 MM PANEL LASERGESCHNITTENEN LAUTERING PLATE (REMOVABLE) MARC LECH TO THE OFF GRAINS MANHOLES WITH SIGHT GLASS 2 X 0, 7KW AGITATOR MOTORS ADJUSTABLE KALLOTENFUSS WORKING PLATFORM BETWEEN TWO TANKS PLATE COOLER COOLER SPICE 6 M 2 WORT AERATION ECKROHRSIEB(HOPFENSIEB) SEASONING 2 X 5 M MILK PIPE DN 50 HOSE PUMP STAINLESS STEEL 304 L
Vendedor: Kraft-Bier GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 28.000 €
Ubicación: Land-weight approx.: 50000 kg<br/>dimensions (l x w x h) approx.: 5000 x 5000 x 3000 mm<br/>description: clansman dynamics c5010-e3s manipulator - vertical arm length 2000mm - horizontal arm lenght 2450mm - operating capacity 4000kg throughout envelope from 50 to 125 degrees and 5000 - 8000 kg from 62.5 to 112.5 degrees - speeds: slew 30 deg/sec. vertical 0.6 m/sec. horizontal 0,6 m/sec. - wrist w5000: capacity 7500 kg with grips vertical, 3000 kg for full 90 degree movement: yaw 145°, axis 5 (pitch) 90°, axis 6 (roll) 360° continous at 90°/sec - gripper g5000: payload 4000 kg, grip fource 12 ton, grip opening 0 - 2000 mm, throat depth 1000 mm - motor size 75 kw the manipulator is mounted on a carriage with pantograph and track. operation stationary is possible after conversion. it is possible to purchase the complete busbar and tracks. the manipulator must be disassembled into 3 parts for transport. WEIGHT APPROX.: 50000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 5000 X 3000 MM
DESCRIPTION: CLANSMAN DYNAMICS C5010-E3S MANIPULATOR - VERTICAL ARM LENGTH 2000MM - HORIZONTAL ARM LENGHT 2450MM - OPERATING CAPACITY 4000KG THROUGHOUT ENVELOPE FROM 50 TO 125 DEGREES AND 5000 - 8000 KG FROM 62.5 TO 112.5 DEGREES - SPEEDS: SLEW 30 DEG/SEC. VERTICAL 0.6 M/SEC. HORIZONTAL 0,6 M/SEC. - WRIST W5000: CAPACITY 7500 KG WITH GRIPS VERTICAL, 3000 KG FOR FULL 90 DEGREE MOVEMENT: YAW 145°, AXIS 5 (PITCH) 90°, AXIS 6 (ROLL) 360° CONTINOUS AT 90°/SEC - GRIPPER G5000: PAYLOAD 4000 KG, GRIP FOURCE 12 TON, GRIP OPENING 0 - 2000 MM, THROAT DEPTH 1000 MM - MOTOR SIZE 75 KW THE MANIPULATOR IS MOUNTED ON A CARRIAGE WITH PANTOGRAPH AND TRACK. OPERATION STATIONARY IS POSSIBLE AFTER CONVERSION. IT IS POSSIBLE TO PURCHASE THE COMPLETE BUSBAR AND TRACKS. THE MANIPULATOR MUST BE DISASSEMBLED INTO 3 PARTS FOR TRANSPORT.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-5 floors with final provers, automatic loading - and furnace conveyor unloader: hinge plates band width: 2 m band length: 7 m baking surface: approx. 70 m â²
built in 2005 with new control by 2014 
 5 FLOORS WITH FINAL PROVERS, AUTOMATIC LOADING - AND FURNACE CONVEYOR UNLOADER: HINGE PLATES BAND WIDTH: 2 M BAND LENGTH: 7 M BAKING SURFACE: APPROX. 70 M &ACIRC;&SUP2; BUILT IN 2005 WITH NEW CONTROL BY 2014
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 3300 x 2400 x 1800 mm<br/>description: sliding table saw lazzari mega<br> serial number lc 1696<br> carriage length 3200 mm<br> carriage width 400 mm<br> aluminum carriage<br> scoring saw group<br> scoring saw motor power 0.75 kw<br> maximum diameter of the main saw 450 mm<br> telescopic arm with control<br> automatic elevation of the saw<br> <, automatic inclination of the saw<br> motor power 5,5 kw<br> 3 working speeds at 2800 - 3800 - 5000 rpm<br> ce standards WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 3300 X 2400 X 1800 MM
DESCRIPTION: SLIDING TABLE SAW LAZZARI MEGA
SERIAL NUMBER LC 1696
CARRIAGE LENGTH 3200 MM
CARRIAGE WIDTH 400 MM
ALUMINUM CARRIAGE
SCORING SAW GROUP
SCORING SAW MOTOR POWER 0.75 KW
MAXIMUM DIAMETER OF THE MAIN SAW 450 MM
TELESCOPIC ARM WITH CONTROL
AUTOMATIC ELEVATION OF THE SAW
<, AUTOMATIC INCLINATION OF THE SAW
MOTOR POWER 5,5 KW
3 WORKING SPEEDS AT 2800 - 3800 - 5000 RPM
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-sell diosna spv spiral kneading machine, without boiler 160 ad.

SELL DIOSNA SPV SPIRAL KNEADING MACHINE, WITHOUT BOILER 160 AD.
Vendedor: Bäckereimaschinen An - und Verkauf
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-serial number: 3001 <br/>weight approx.: 3000 kg<br/>cutting length: 3200 mm<br/>dimensions (l x w x h) approx.: 8000x2400x2400 mm<br/>cutting height: 50 mm<br/>main motor: 5,5 kw<br/>scoring saw: 1,1 kw<br/>cutting depth: 2850 mm<br/>clamps piece: 5 ( 70/250/400/1610/2850mm) piece<br/>main saw blade: 250 mm<br/>scoring saw blade: 125 mm<br/>saw carriage speed forward: 15/30 m/min<br/>saw carriage speed reverse: 15/30 m/min<br/>program fence speed forward: 24 m/min<br/>program fence speed reverse: 24 m/min<br/>description: panhans euro 5 panel saw<br> - table dimensions: 1400 x 400 mm SERIAL NUMBER: 3001
WEIGHT APPROX.: 3000 KG
CUTTING LENGTH: 3200 MM
DIMENSIONS (L X W X H) APPROX.: 8000X2400X2400 MM
CUTTING HEIGHT: 50 MM
MAIN MOTOR: 5,5 KW
SCORING SAW: 1,1 KW
CUTTING DEPTH: 2850 MM
CLAMPS PIECE: 5 ( 70/250/400/1610/2850MM) PIECE
MAIN SAW BLADE: 250 MM
SCORING SAW BLADE: 125 MM
SAW CARRIAGE SPEED FORWARD: 15/30 M/MIN
SAW CARRIAGE SPEED REVERSE: 15/30 M/MIN
PROGRAM FENCE SPEED FORWARD: 24 M/MIN
PROGRAM FENCE SPEED REVERSE: 24 M/MIN
DESCRIPTION: PANHANS EURO 5 PANEL SAW
- TABLE DIMENSIONS: 1400 X 400 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-  4 cleaning heads, 1 filling head 60 keg/h, 30, 50 din keg
    with aussenwascher 4 CLEANING HEADS, 1 FILLING HEAD 60 KEG/H, 30, 50 DIN KEG WITH AUSSENWASCHER
Vendedor: Brauereiservice Uwe Metzler
Año de construcción: usado
Ubicación: Land-serial number: 0-240-06-3128 <br/>weight approx.: 5000 kg<br/>cutting length: 4200 mm<br/>control: cadmatic optimat <br/>dimensions (l x w x h) approx.: 13000 x2400x2400 mm<br/>main motor: 13,5 kw<br/>scoring saw: 2,2 kw<br/>cutting depth: 4200 mm<br/>saw blade protection: 85 mm<br/>max. opening of clamps: 85 mm<br/>clamps piece: 7 ( 50/250/450/1050/1850/2650/3450) piece<br/>main saw blade: 380 mm<br/>air table: 4 (2810x650 mm) <br/>saw carriage speed forward: 5-70 m/min<br/>saw carriage speed reverse: 70 m/min<br/>program fence speed forward: 25 m/min<br/>program fence speed reverse: 40 m/min<br/>description: <b><u>holzma hpp 81/42-cad panel saw</u></b><br> <br> <u>further machine details:</u><br> - with label program for cadmatic<br> - with label printer type solo 80<br> - data transfer on-line (rs232)<br> - on-line data transfer from machine control to econo-lift<br> <br> <b>machine will be delivered without the holzma econo-lift and side air table</b><br> SERIAL NUMBER: 0-240-06-3128
WEIGHT APPROX.: 5000 KG
CUTTING LENGTH: 4200 MM
CONTROL: CADMATIC OPTIMAT
DIMENSIONS (L X W X H) APPROX.: 13000 X2400X2400 MM
MAIN MOTOR: 13,5 KW
SCORING SAW: 2,2 KW
CUTTING DEPTH: 4200 MM
SAW BLADE PROTECTION: 85 MM
MAX. OPENING OF CLAMPS: 85 MM
CLAMPS PIECE: 7 ( 50/250/450/1050/1850/2650/3450) PIECE
MAIN SAW BLADE: 380 MM
AIR TABLE: 4 (2810X650 MM)
SAW CARRIAGE SPEED FORWARD: 5-70 M/MIN
SAW CARRIAGE SPEED REVERSE: 70 M/MIN
PROGRAM FENCE SPEED FORWARD: 25 M/MIN
PROGRAM FENCE SPEED REVERSE: 40 M/MIN
DESCRIPTION: HOLZMA HPP 81/42-CAD PANEL SAW

FURTHER MACHINE DETAILS:
- WITH LABEL PROGRAM FOR CADMATIC
- WITH LABEL PRINTER TYPE SOLO 80
- DATA TRANSFER ON-LINE (RS232)
- ON-LINE DATA TRANSFER FROM MACHINE CONTROL TO ECONO-LIFT

MACHINE WILL BE DELIVERED WITHOUT THE HOLZMA ECONO-LIFT AND SIDE AIR TABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-a used meat cutter is sold by k + g wetter
type sm 65 stl
bowl contents 65 l
adjustable knife speed
with a rotary handle can be is infinitely regulate the speed of the knife, by the slow mixing up to the maximum speed, A USED MEAT CUTTER IS SOLD BY K + G WETTER TYPE SM 65 STL BOWL CONTENTS 65 L ADJUSTABLE KNIFE SPEED WITH A ROTARY HANDLE CAN BE IS INFINITELY REGULATE THE SPEED OF THE KNIFE, BY THE SLOW MIXING UP TO THE MAXIMUM SPEED,
Vendedor: An-und Verkauf von Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 4000 x 2000 mm<br />-loading height 540 mm<br />-bearing load max. 5,000 kg<br />-full rubber tires<br />-drawbar as interchangeable drawbar<br />-2 pieces car available<br />-prize piece<br />-external dimensions 3020/1250 / h540 mm<br />-eigen weight 1440 kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 4000 X 2000 MM
-LOADING HEIGHT 540 MM
-BEARING LOAD MAX. 5,000 KG
-FULL RUBBER TIRES
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-2 PIECES CAR AVAILABLE
-PRIZE PIECE
-EXTERNAL DIMENSIONS 3020/1250 / H540 MM
-EIGEN WEIGHT 1440 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-adjustable crimper height.
adjustable infeed position.
quick change infeed pushers.
variable speed control.
handwheel adjustment cut off length via speed variator

used, in good working condition ADJUSTABLE CRIMPER HEIGHT. ADJUSTABLE INFEED POSITION. QUICK CHANGE INFEED PUSHERS. VARIABLE SPEED CONTROL. HANDWHEEL ADJUSTMENT CUT OFF LENGTH VIA SPEED VARIATOR USED, IN GOOD WORKING CONDITION
Vendedor: Rovita
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 4000 x 2000 mm<br />-loading height 650 mm<br />-bearing load max. 12,000 kg<br />-full rubber tires<br />-drawbar as interchangeable drawbar<br />-1 piece car available<br />-prize piece<br />-external dimensions 4680/2000 / h650 mm<br />-eigen weight 1440 kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 4000 X 2000 MM
-LOADING HEIGHT 650 MM
-BEARING LOAD MAX. 12,000 KG
-FULL RUBBER TIRES
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-1 PIECE CAR AVAILABLE
-PRIZE PIECE
-EXTERNAL DIMENSIONS 4680/2000 / H650 MM
-EIGEN WEIGHT 1440 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-it is a used wiesheu store oven (year 2011) on a mobile frame for sale. the oven is fully functional and in good condition. for trays 60 x 40.

price on request. IT IS A USED WIESHEU STORE OVEN (YEAR 2011) ON A MOBILE FRAME FOR SALE. THE OVEN IS FULLY FUNCTIONAL AND IN GOOD CONDITION. FOR TRAYS 60 X 40. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 6200 x 2480 mm<br />-loading height 915 mm<br />-bearing load max. 50,000 kg<br />-full rubber tires 620/200-410 stb-mh20-a-robust<br />-drawbar as interchangeable drawbar<br />-1 piece car available<br />-prize piece<br />-outer dimensions 6800/2480 / h915 mm<br />-eigen weight kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 6200 X 2480 MM
-LOADING HEIGHT 915 MM
-BEARING LOAD MAX. 50,000 KG
-FULL RUBBER TIRES 620/200-410 STB-MH20-A-ROBUST
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-1 PIECE CAR AVAILABLE
-PRIZE PIECE
-OUTER DIMENSIONS 6800/2480 / H915 MM
-EIGEN WEIGHT KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-used stainless steel silo
last purpose: food

volume: 1200l
type: standing materials (media contact): stainless steel v2a
design: single-walled
bottom: conical bottom
topsoil: fully removable / screwed / hinged lid
working pressure according to the nameplate: atm

dimensions tank:

inside diameter: 1130mm
outside diameter: 1150 mm
cyl. height: 990mm
distance from drain to the ground: 260 mm
total height: 2010 mm
width: 1190x1190mm
height of the frame: 85mm

materials:

interior: stainless steel 1.4301 / v2a
exterior: stainless steel 1.4301 / v2a

facilities:

completely removable top shelf / screwed / hinged lid
outlet: dn 50 USED STAINLESS STEEL SILO LAST PURPOSE: FOOD VOLUME: 1200L TYPE: STANDING MATERIALS (MEDIA CONTACT): STAINLESS STEEL V2A DESIGN: SINGLE-WALLED BOTTOM: CONICAL BOTTOM TOPSOIL: FULLY REMOVABLE / SCREWED / HINGED LID WORKING PRESSURE ACCORDING TO THE NAMEPLATE: ATM DIMENSIONS TANK: INSIDE DIAMETER: 1130MM OUTSIDE DIAMETER: 1150 MM CYL. HEIGHT: 990MM DISTANCE FROM DRAIN TO THE GROUND: 260 MM TOTAL HEIGHT: 2010 MM WIDTH: 1190X1190MM HEIGHT OF THE FRAME: 85MM MATERIALS: INTERIOR: STAINLESS STEEL 1.4301 / V2A EXTERIOR: STAINLESS STEEL 1.4301 / V2A FACILITIES: COMPLETELY REMOVABLE TOP SHELF / SCREWED / HINGED LID OUTLET: DN 50
Vendedor: Inox Behälter GmbH
Año de construcción: usado
Ubicación: Land-double panel saw with central carriage, manually operated<br/>max working width: 3 m.<br/>max. stroke of carriage: 2,5 m. (usefull)<br/>width adj. by handwheel<br/>2 main motors 4,4 kw and 2 scoring motors 0,75 kw,<br/> incl. freq. converter 50/100 hz<br/>sawing units are tilting (handwheel) DOUBLE PANEL SAW WITH CENTRAL CARRIAGE, MANUALLY OPERATED
MAX WORKING WIDTH: 3 M.
MAX. STROKE OF CARRIAGE: 2,5 M. (USEFULL)
WIDTH ADJ. BY HANDWHEEL
2 MAIN MOTORS 4,4 KW AND 2 SCORING MOTORS 0,75 KW,
INCL. FREQ. CONVERTER 50/100 HZ
SAWING UNITS ARE TILTING (HANDWHEEL)
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-vegetable peeling machine dito-sama t10 VEGETABLE PEELING MACHINE DITO-SAMA T10
Vendedor: Voglauer Gschwandtner & Zwilling GmbH
Año de construcción: usado
Ubicación: Land-capacity: 4200 mm x 2200 mm.<br/>sawblade height: 135 mm.<br/>main saw motor 21 kw / scoring motor 1.9 kw<br/>saw-carriage speed: 6-150 m / min, returnspeed 150 m / min <br/>programm fence speed: 80 m / min (limited to 25 m / min)<br/>8 grippers, centers 65/165/265/465/1065/1965/2865/3765 mm.<br/>rotatable air cushion table in front of the machine 4200 x 2200 mm<br/>control: mcs evolution 2.0<br/>hardware: windows xp - tft display<br/>software: graphical representation of the saw plan<br/>online connection for data transfer with external optimization (eg ardis)<br/>connection with automatic warehouse<br/>panels are placed directly behind the saw by means of an automatic warehouse<br/>roller conveyor behind cutting line length 9m60 CAPACITY: 4200 MM X 2200 MM.
SAWBLADE HEIGHT: 135 MM.
MAIN SAW MOTOR 21 KW / SCORING MOTOR 1.9 KW
SAW-CARRIAGE SPEED: 6-150 M / MIN, RETURNSPEED 150 M / MIN
PROGRAMM FENCE SPEED: 80 M / MIN (LIMITED TO 25 M / MIN)
8 GRIPPERS, CENTERS 65/165/265/465/1065/1965/2865/3765 MM.
ROTATABLE AIR CUSHION TABLE IN FRONT OF THE MACHINE 4200 X 2200 MM
CONTROL: MCS EVOLUTION 2.0
HARDWARE: WINDOWS XP - TFT DISPLAY
SOFTWARE: GRAPHICAL REPRESENTATION OF THE SAW PLAN
ONLINE CONNECTION FOR DATA TRANSFER WITH EXTERNAL OPTIMIZATION (EG ARDIS)
CONNECTION WITH AUTOMATIC WAREHOUSE
PANELS ARE PLACED DIRECTLY BEHIND THE SAW BY MEANS OF AN AUTOMATIC WAREHOUSE
ROLLER CONVEYOR BEHIND CUTTING LINE LENGTH 9M60
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-
complete westfalia  milk  clarifier separator
year 2015
capacity is : 15,000kg/h

working condations

 COMPLETE WESTFALIA MILK CLARIFIER SEPARATOR YEAR 2015 CAPACITY IS : 15,000KG/H WORKING CONDATIONS
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-capacity: 3100 mm x 2200 mm.<br/>sawblade height: 135 mm.<br/>main saw motor 32 kw / scoring motor 1.9 kw<br/>saw-carriage speed: 6-150 m / min, returnspeed 150 m / min <br/>programm fence speed: 80 m / min (limited to 25 m / min)<br/>10 grippers, centers 65/165/265/365/465/765/1065/1365/1965/2865 mm.<br/>rotatable air cushion table in front of the machine 3200 x 2200 mm<br/>control: mcs evolution 2.0<br/>hardware: windows xp - tft display<br/>software: graphical representation of the saw plan<br/>online connection for data transfer with external optimization (eg ardis)<br/>connection with automatic warehouse<br/>panels are placed directly behind the saw by means of an automatic warehouse<br/>roller conveyor behind cutting line length 9m60 CAPACITY: 3100 MM X 2200 MM.
SAWBLADE HEIGHT: 135 MM.
MAIN SAW MOTOR 32 KW / SCORING MOTOR 1.9 KW
SAW-CARRIAGE SPEED: 6-150 M / MIN, RETURNSPEED 150 M / MIN
PROGRAMM FENCE SPEED: 80 M / MIN (LIMITED TO 25 M / MIN)
10 GRIPPERS, CENTERS 65/165/265/365/465/765/1065/1365/1965/2865 MM.
ROTATABLE AIR CUSHION TABLE IN FRONT OF THE MACHINE 3200 X 2200 MM
CONTROL: MCS EVOLUTION 2.0
HARDWARE: WINDOWS XP - TFT DISPLAY
SOFTWARE: GRAPHICAL REPRESENTATION OF THE SAW PLAN
ONLINE CONNECTION FOR DATA TRANSFER WITH EXTERNAL OPTIMIZATION (EG ARDIS)
CONNECTION WITH AUTOMATIC WAREHOUSE
PANELS ARE PLACED DIRECTLY BEHIND THE SAW BY MEANS OF AN AUTOMATIC WAREHOUSE
ROLLER CONVEYOR BEHIND CUTTING LINE LENGTH 9M60
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-5-axis machining center-
fehlmann picomax 825 with erowa pallet automation

control: heidenhein itnc530
year of construction: 2010

procedures/swing areas:
x-axis: 820mm
y-axis: 700mm
z-axis: 450mm
a-axis: 230â° (view compactset 115 â° +/-)
c-axis: 360â° (round table)

rapid traverse:
30 000 mm (linear axes)

spindle speed range: 50-20,000 1/min
interface: hsk63
power: 24kw
torque: 120nm

tool changer:
80 positions (pickup)

facilities: erowa robot easy automation with 10 pallets for workpieces up to 310 x 310 x 300 mm 80 bar ikz 1050 l coolant tank (coolant pressure above m features adjustable)

renishaw omp 40-2 probe

laser tool measurement for d0, 3-80 mm

direct path measurement systems for all axes (xyzac)

actively cooled shaft drives in all axes (xyzac)
actively cooled y carriage

automatic length compensation of main spindle via direct measuring system

5achsen-simultan and spline interpolsation (polynomials 3.grades)

round table with torque drive 5-AXIS MACHINING CENTER- FEHLMANN PICOMAX 825 WITH EROWA PALLET AUTOMATION CONTROL: HEIDENHEIN ITNC530 YEAR OF CONSTRUCTION: 2010 PROCEDURES/SWING AREAS: X-AXIS: 820MM Y-AXIS: 700MM Z-AXIS: 450MM A-AXIS: 230&ACIRC;&DEG; (VIEW COMPACTSET 115 &ACIRC;&DEG; +/-) C-AXIS: 360&ACIRC;&DEG; (ROUND TABLE) RAPID TRAVERSE: 30 000 MM (LINEAR AXES) SPINDLE SPEED RANGE: 50-20,000 1/MIN INTERFACE: HSK63 POWER: 24KW TORQUE: 120NM TOOL CHANGER: 80 POSITIONS (PICKUP) FACILITIES: EROWA ROBOT EASY AUTOMATION WITH 10 PALLETS FOR WORKPIECES UP TO 310 X 310 X 300 MM 80 BAR IKZ 1050 L COOLANT TANK (COOLANT PRESSURE ABOVE M FEATURES ADJUSTABLE) RENISHAW OMP 40-2 PROBE LASER TOOL MEASUREMENT FOR D0, 3-80 MM DIRECT PATH MEASUREMENT SYSTEMS FOR ALL AXES (XYZAC) ACTIVELY COOLED SHAFT DRIVES IN ALL AXES (XYZAC) ACTIVELY COOLED Y CARRIAGE AUTOMATIC LENGTH COMPENSATION OF MAIN SPINDLE VIA DIRECT MEASURING SYSTEM 5ACHSEN-SIMULTAN AND SPLINE INTERPOLSATION (POLYNOMIALS 3.GRADES) ROUND TABLE WITH TORQUE DRIVE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-rear loading<br/>max cutting length: 4400 mm<br/>max cutting height: 125 mm<br/>main saw diameter430 mm<br/>main saw motor power 20 hp<br/>scoring saw diamet 200 mm<br/>scoring saw mot 2 hp<br/>clamps: 7 pcs<br/>saw carriage feed speed 0 – 100 m/min<br/>elevator with roller conveyor at the back of the machine REAR LOADING
MAX CUTTING LENGTH: 4400 MM
MAX CUTTING HEIGHT: 125 MM
MAIN SAW DIAMETER430 MM
MAIN SAW MOTOR POWER 20 HP
SCORING SAW DIAMET 200 MM
SCORING SAW MOT 2 HP
CLAMPS: 7 PCS
SAW CARRIAGE FEED SPEED 0 – 100 M/MIN
ELEVATOR WITH ROLLER CONVEYOR AT THE BACK OF THE MACHINE
Vendedor: Vebim
Año de construcción: usado
Precio: 22.000 €
Ubicación: Land-a vacuum filler is sold by the company frey

type: f-line f190

construction year: 2013

-with intestinal clamp

-with casing machine

-fill, portion, turn off

-filling power 3.600 kg / h

-machine housing and hopper made of stainless steel

-touch screen controls

-lift for 200 l buggies A VACUUM FILLER IS SOLD BY THE COMPANY FREY TYPE: F-LINE F190 CONSTRUCTION YEAR: 2013 -WITH INTESTINAL CLAMP -WITH CASING MACHINE -FILL, PORTION, TURN OFF -FILLING POWER 3.600 KG / H -MACHINE HOUSING AND HOPPER MADE OF STAINLESS STEEL -TOUCH SCREEN CONTROLS -LIFT FOR 200 L BUGGIES
Vendedor: An-und Verkauf von Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-notching machine for doors, windows and furniture doors<br/>machine has got 3 milling tools driven by 1 motor of 3 hp (3000 rpm)<br/>max. timber section: 45 x 45 mm<br/>max. length between 2 notches: 600 mm<br/>automatic cycle, timber is transported by a carriage with stroke of 600 mm<br/>motor hydr: 1 hp<br/> NOTCHING MACHINE FOR DOORS, WINDOWS AND FURNITURE DOORS
MACHINE HAS GOT 3 MILLING TOOLS DRIVEN BY 1 MOTOR OF 3 HP (3000 RPM)
MAX. TIMBER SECTION: 45 X 45 MM
MAX. LENGTH BETWEEN 2 NOTCHES: 600 MM
AUTOMATIC CYCLE, TIMBER IS TRANSPORTED BY A CARRIAGE WITH STROKE OF 600 MM
MOTOR HYDR: 1 HP
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-cryovac oldrivers furukawa

type: fvv12-220sb

efficiency: 10-45 bags/minute

bags dimensions: width: 80-220 mm/length: 150 mm x 300 mm

water consumption: 3 l/min

vacuum pump 630 m3/h
 CRYOVAC OLDRIVERS FURUKAWA TYPE: FVV12-220SB EFFICIENCY: 10-45 BAGS/MINUTE BAGS DIMENSIONS: WIDTH: 80-220 MM/LENGTH: 150 MM X 300 MM WATER CONSUMPTION: 3 L/MIN VACUUM PUMP 630 M3/H
Vendedor: BmgTrade
Año de construcción: usado
Ubicación: Land-right hand machine<br/>cut off saw, 2,2kw<br/>2 x horizontal spindles, 2 x 2,2 kw<br/>1 x vertical spindle with 200 mm length, 50 mm diameter, 5,5 kw<br/>manual carriage RIGHT HAND MACHINE
CUT OFF SAW, 2,2KW
2 X HORIZONTAL SPINDLES, 2 X 2,2 KW
1 X VERTICAL SPINDLE WITH 200 MM LENGTH, 50 MM DIAMETER, 5,5 KW
MANUAL CARRIAGE
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-schã¼tte multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
"" (special) to: 100/63 mm

number of independent cross slide: 6
total / working ways middle and upper carriage up: 32/20 mm
lower carriage up: 40/25 mm

spindle diameter: 224 mm
main time min/max: 0.36/150 sec.
productive time min./max.: 0.45/0.80 sec.

spindle speed from / to: 900-5000 u/min
2. area: 355-2000 u/min

nominal power of the motor: 15 kw
power supply: 50 kva
the drive motor speed: 1500 rpm
length * width (standard execution) 3705 * 1320 mm
incl. rod guide (standard execution) 6335 mm

approximate weight without rod guide and accessories: 4.6 to.
the rod guide approximately: 0.5 to.
total without accessories approx. to 5.1.
(all information according to manufacturer)

beiuyg98hw
equipment:
sub unit with rear processing
thread cutter gearbox with electric clutch
gewindescheidspindel
additional longitudinal slide on location: 1, 2 + 4, 5
discharge
hydraulic part tray in pos 6
force and farmer c02 fire equipment (non-operating)

electrical:

siemens s5 control
camshaft gear: mahani seperate control panel / control panel on the operating side and back
waheed clear text display
electrically prepared for bar loader (n)

other:
prepared for decentralized oil mist separator

machine is in our showroom under power! SCH&ATILDE;&FRAC14;TTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-carriage 3m20<br/>sawblade tilting: -45° /90°<br/>main saw: 5,5 kw<br/>speed adjustable: 3000, 4000, 5000tr/min<br/>sawblade rise, fall and tilt motorised with digital read-out<br/>scorer: 0,75kw<br/>scorer with motorised positioning aside and in height<br/>led light at danger zone for scorer<br/>cnc controlled fence up to 1m35<br/>cross fence with length correction digit l<br/>extension for cross fence<br/>twin mitre fence duplex up to 1m35<br/>front support roller<br/>max sawblade diameter 450mm CARRIAGE 3M20
SAWBLADE TILTING: -45° /90°
MAIN SAW: 5,5 KW
SPEED ADJUSTABLE: 3000, 4000, 5000TR/MIN
SAWBLADE RISE, FALL AND TILT MOTORISED WITH DIGITAL READ-OUT
SCORER: 0,75KW
SCORER WITH MOTORISED POSITIONING ASIDE AND IN HEIGHT
LED LIGHT AT DANGER ZONE FOR SCORER
CNC CONTROLLED FENCE UP TO 1M35
CROSS FENCE WITH LENGTH CORRECTION DIGIT L
EXTENSION FOR CROSS FENCE
TWIN MITRE FENCE DUPLEX UP TO 1M35
FRONT SUPPORT ROLLER
MAX SAWBLADE DIAMETER 450MM
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-schuette multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
SCHUETTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-cutting length 4300mm<br/>cutting width  4300mm<br/>sawblade height 125mm<br/>main motor 13.5kw<br/>scoring 2.2kw<br/>feed speed of saw carriage 5-100m/min forward, 100 m/min return<br/>programmable fence with 7 grippers<br/>main sawbalde diameter 450mm<br/>4 air tables of 2160 x 650<br/>powerloc system for main saw and scoring saw<br/>cadmatic controlls<br/>dust extraction: 1 x diameter 200 mm, 1 x diameter 160 mm<br/>air speed required: 28 m/s CUTTING LENGTH 4300MM
CUTTING WIDTH 4300MM
SAWBLADE HEIGHT 125MM
MAIN MOTOR 13.5KW
SCORING 2.2KW
FEED SPEED OF SAW CARRIAGE 5-100M/MIN FORWARD, 100 M/MIN RETURN
PROGRAMMABLE FENCE WITH 7 GRIPPERS
MAIN SAWBALDE DIAMETER 450MM
4 AIR TABLES OF 2160 X 650
POWERLOC SYSTEM FOR MAIN SAW AND SCORING SAW
CADMATIC CONTROLLS
DUST EXTRACTION: 1 X DIAMETER 200 MM, 1 X DIAMETER 160 MM
AIR SPEED REQUIRED: 28 M/S
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-ionized air can rinser trans-tech hysek 120 000 cph
 
this german built trans-tech can rinser with 2x bmh empty can inverters was built and installed in 2011. it is in excellent conditions. it comes with a 180 degree can twister on the top part, the ionized air rinser (with pumps and treatment) and a 180 degree upright twister on the bottom of the rinser. the platform and supports are included. the equipment is installed and in use, and can be inspected in operation.
 
make: trans-tech hysek and bmh feed gear
manufacturing year: 2011
capacity: up to 2.000 can per minute (120 000 cph)
running hours: less than 8.000 hrs
container handling: 8oz – 66mm diameter / 87mm height
350ml – 66 mm diameter / 122 mm height
473ml – 66 mm diameter / 157 mm height
10.5oz – 57 mm diameter / 138 mm heigth
electricity: 460 v / 60 hz   IONIZED AIR CAN RINSER TRANS-TECH HYSEK 120 000 CPH THIS GERMAN BUILT TRANS-TECH CAN RINSER WITH 2X BMH EMPTY CAN INVERTERS WAS BUILT AND INSTALLED IN 2011. IT IS IN EXCELLENT CONDITIONS. IT COMES WITH A 180 DEGREE CAN TWISTER ON THE TOP PART, THE IONIZED AIR RINSER (WITH PUMPS AND TREATMENT) AND A 180 DEGREE UPRIGHT TWISTER ON THE BOTTOM OF THE RINSER. THE PLATFORM AND SUPPORTS ARE INCLUDED. THE EQUIPMENT IS INSTALLED AND IN USE, AND CAN BE INSPECTED IN OPERATION. MAKE: TRANS-TECH HYSEK AND BMH FEED GEAR MANUFACTURING YEAR: 2011 CAPACITY: UP TO 2.000 CAN PER MINUTE (120 000 CPH) RUNNING HOURS: LESS THAN 8.000 HRS CONTAINER HANDLING: 8OZ – 66MM DIAMETER / 87MM HEIGHT 350ML – 66 MM DIAMETER / 122 MM HEIGHT 473ML – 66 MM DIAMETER / 157 MM HEIGHT 10.5OZ – 57 MM DIAMETER / 138 MM HEIGTH ELECTRICITY: 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-cutting capacity: 4300 mm x 4300 mm.<br/>sawblade height: 125 mm.<br/>main motor 13,5 kw / scoring motor 2,2 kw<br/>saw-carriage speed: 1-150 m/min. returnspeed 150 m/min.<br/>programm fence speed: 90 m/min (limited to 25 m/min)<br/>7 grippers, centers 75/275/475/1075/1825/2625/3425 mm.<br/>machine control: cadmatic 4 – professional<br/>hardware: windows xp (us) tft display<br/>software showing cutting plans 2-d/3-d, graphic malfunction diagnostics by video.<br/><br/>econolift:<br/>automatic panel feed through a front-mounted lifting table <br/>plate dimensions max. 4200 x 2200 mm<br/>max load: 7 tons<br/>construction year 2002 CUTTING CAPACITY: 4300 MM X 4300 MM.
SAWBLADE HEIGHT: 125 MM.
MAIN MOTOR 13,5 KW / SCORING MOTOR 2,2 KW
SAW-CARRIAGE SPEED: 1-150 M/MIN. RETURNSPEED 150 M/MIN.
PROGRAMM FENCE SPEED: 90 M/MIN (LIMITED TO 25 M/MIN)
7 GRIPPERS, CENTERS 75/275/475/1075/1825/2625/3425 MM.
MACHINE CONTROL: CADMATIC 4 – PROFESSIONAL
HARDWARE: WINDOWS XP (US) TFT DISPLAY
SOFTWARE SHOWING CUTTING PLANS 2-D/3-D, GRAPHIC MALFUNCTION DIAGNOSTICS BY VIDEO.

ECONOLIFT:
AUTOMATIC PANEL FEED THROUGH A FRONT-MOUNTED LIFTING TABLE
PLATE DIMENSIONS MAX. 4200 X 2200 MM
MAX LOAD: 7 TONS
CONSTRUCTION YEAR 2002
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-rinser for glass and pet bottles, fully automatic wab adv 12 000 bph
 
the rinser was made by italian wab in year 2003 and it has capacity of 12 000 bph this machine has a special grip which allows to work with both pet and glass bottles. it is designed to rinse bottles inside with water or specific detergents with adjustable concentration. as an option, machine is equipped with rinsing water filtration system which protects and avoids dirty water penetration in to rinsing system. for easy operation and format change, machine is equipped with electronic carousel height adjustment. the rinser in dismantled and in good condition.
 
technical description
 
suitable for: glass and pet bottles
manufacturer: wab (italy)
manufacturing year: 2003
model: adv 1r+1s 7-35-125-107
number of rinsing heads: 35
maximum pitch: 125 mm
capacity: 12 000 bph
used for bottle sizes: 350 - 1000 ml
bottle diameters used: 58.2 - 79.5 mm
botlle heights used: 214 - 355 mm
rinsing temperature min: 10 c - max 40 c degrees
serial nr: c646/35 adv
electricity: 220v / 50 hz
installed power: 9,5 kva   RINSER FOR GLASS AND PET BOTTLES, FULLY AUTOMATIC WAB ADV 12 000 BPH THE RINSER WAS MADE BY ITALIAN WAB IN YEAR 2003 AND IT HAS CAPACITY OF 12 000 BPH THIS MACHINE HAS A SPECIAL GRIP WHICH ALLOWS TO WORK WITH BOTH PET AND GLASS BOTTLES. IT IS DESIGNED TO RINSE BOTTLES INSIDE WITH WATER OR SPECIFIC DETERGENTS WITH ADJUSTABLE CONCENTRATION. AS AN OPTION, MACHINE IS EQUIPPED WITH RINSING WATER FILTRATION SYSTEM WHICH PROTECTS AND AVOIDS DIRTY WATER PENETRATION IN TO RINSING SYSTEM. FOR EASY OPERATION AND FORMAT CHANGE, MACHINE IS EQUIPPED WITH ELECTRONIC CAROUSEL HEIGHT ADJUSTMENT. THE RINSER IN DISMANTLED AND IN GOOD CONDITION. TECHNICAL DESCRIPTION SUITABLE FOR: GLASS AND PET BOTTLES MANUFACTURER: WAB (ITALY) MANUFACTURING YEAR: 2003 MODEL: ADV 1R+1S 7-35-125-107 NUMBER OF RINSING HEADS: 35 MAXIMUM PITCH: 125 MM CAPACITY: 12 000 BPH USED FOR BOTTLE SIZES: 350 - 1000 ML BOTTLE DIAMETERS USED: 58.2 - 79.5 MM BOTLLE HEIGHTS USED: 214 - 355 MM RINSING TEMPERATURE MIN: 10 C - MAX 40 C DEGREES SERIAL NR: C646/35 ADV ELECTRICITY: 220V / 50 HZ INSTALLED POWER: 9,5 KVA
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-panel thickness: 12 - 60 mm<br/>feed speed: 18 - 24 m/min<br/>edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood<br/><br/>equipment: <br/>help carriage feeding the panels rectangular<br/>automatic fence at the infeed<br/>squaring device: 2 x 3,0 kw<br/>panel edge pre-heater<br/>hot melt unit: qa34 / a20 <br/>edge magazine <br/>lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers<br/>end trims hl83, programmable change straight/chamfer, 2 motors 0,5 kw<br/>rough trimming: 2 x 1,5 kw<br/>top/bottom fine trimming, tilting, 2 x 0,4 kw<br/>contour trimming fk 13, 2 x 0,4 kw, with 8-fold toolchangers<br/>universal milling motor 4kw <br/>profile scrapers<br/>flat scrapers<br/>buffing unit with oscillation<br/>controlls: homatic nc16 PANEL THICKNESS: 12 - 60 MM
FEED SPEED: 18 - 24 M/MIN
EDGE THICKNESS: 0,4 - 3 MM FOR COIL EDGES, 0,4 - 20 MM FOR STRIPS / SOLID WOOD

EQUIPMENT:
HELP CARRIAGE FEEDING THE PANELS RECTANGULAR
AUTOMATIC FENCE AT THE INFEED
SQUARING DEVICE: 2 X 3,0 KW
PANEL EDGE PRE-HEATER
HOT MELT UNIT: QA34 / A20
EDGE MAGAZINE
LATERAL PRESSURE ROLLERS, THICKNESS PROGRAMMABLE, 1 DRIVEN, 6 NON-DRIVEN ROLLERS
END TRIMS HL83, PROGRAMMABLE CHANGE STRAIGHT/CHAMFER, 2 MOTORS 0,5 KW
ROUGH TRIMMING: 2 X 1,5 KW
TOP/BOTTOM FINE TRIMMING, TILTING, 2 X 0,4 KW
CONTOUR TRIMMING FK 13, 2 X 0,4 KW, WITH 8-FOLD TOOLCHANGERS
UNIVERSAL MILLING MOTOR 4KW
PROFILE SCRAPERS
FLAT SCRAPERS
BUFFING UNIT WITH OSCILLATION
CONTROLLS: HOMATIC NC16
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-tunnel pasteurizer double deck sasib pama 6512 dr, 90.000 bph
 
this is two deck design tunnel pasteurizer was made by sasib (now sidel) in 1998 and it was refurbished in 2012. this pasteurizer features the walking beam conveyor system, which is very reliable when handling fragile bottles and when working in high temperatures. the pasteurizer has total of 7 zones and it is two deck design. in- and out-feed conveyors are included in the delivery.
 
technical information
manufacturer: sasib beverage s.p.a.
type: pama 6512 dr
manufacturing year: 1998
number of zones: 7
capacity: 0.20 liters 2 x 47 000 bph
capacity: 0.66 liters 2 x 45 000 bph
control plc: siemens simatic s7 with touch screen
serial nr.: paf 194   TUNNEL PASTEURIZER DOUBLE DECK SASIB PAMA 6512 DR, 90.000 BPH THIS IS TWO DECK DESIGN TUNNEL PASTEURIZER WAS MADE BY SASIB (NOW SIDEL) IN 1998 AND IT WAS REFURBISHED IN 2012. THIS PASTEURIZER FEATURES THE WALKING BEAM CONVEYOR SYSTEM, WHICH IS VERY RELIABLE WHEN HANDLING FRAGILE BOTTLES AND WHEN WORKING IN HIGH TEMPERATURES. THE PASTEURIZER HAS TOTAL OF 7 ZONES AND IT IS TWO DECK DESIGN. IN- AND OUT-FEED CONVEYORS ARE INCLUDED IN THE DELIVERY. TECHNICAL INFORMATION MANUFACTURER: SASIB BEVERAGE S.P.A. TYPE: PAMA 6512 DR MANUFACTURING YEAR: 1998 NUMBER OF ZONES: 7 CAPACITY: 0.20 LITERS 2 X 47 000 BPH CAPACITY: 0.66 LITERS 2 X 45 000 BPH CONTROL PLC: SIEMENS SIMATIC S7 WITH TOUCH SCREEN SERIAL NR.: PAF 194
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 320 mm<br/>turning diameter over slide rest: 198 mm<br/>turning length: 650 mm<br/>turning speed range: 20 - 3000 u/min<br/>feeds - longitudinal: 0,02 - 0,63 mm/u<br/>feeds - cross: 0,32 x längsvorschub mm/u<br/>3-jaw-chuck diameter: max.165 mm<br/>centre height: 160 mm<br/>spindle bore: 40 mm<br/>spindle head: 55027 <br/>motor power: 2,4/ 3 kw<br/>voltage: 400 v<br/>: 4 kw<br/>weight: 700 kg<br/>range l-w-h: ca. 1600 - 900 - 1390 mm<br/>mechanic: very good:  <br/>optical condition: very good:  <br/>the machine can be viewed under current.:  <br/>89 160 1588<br/>380 v - 50 hz colour: green<br/>accessories:<br/>* 3 axis heidenhain digital display vrz 773<br/>* multifix tool holder size a with 6 inlets<br/>* punch point - revolving (new)<br/>* punch point - fix<br/>* bison 3-jaw  chuck 160 mm<br/>* pliers tubing<br/>* cooling equipment<br/>* machine shoes<br/>* protection from shavings waste folding, electrically controlled<br/><br/>* operating manual, spare parts list, wiring diagramm, operation keys<br/><br/><br/>the machine has been tested in our repair department including electrical<br/>testing report!<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 320 MM
TURNING DIAMETER OVER SLIDE REST: 198 MM
TURNING LENGTH: 650 MM
TURNING SPEED RANGE: 20 - 3000 U/MIN
FEEDS - LONGITUDINAL: 0,02 - 0,63 MM/U
FEEDS - CROSS: 0,32 X LäNGSVORSCHUB MM/U
3-JAW-CHUCK DIAMETER: MAX.165 MM
CENTRE HEIGHT: 160 MM
SPINDLE BORE: 40 MM
SPINDLE HEAD: 55027
MOTOR POWER: 2,4/ 3 KW
VOLTAGE: 400 V
: 4 KW
WEIGHT: 700 KG
RANGE L-W-H: CA. 1600 - 900 - 1390 MM
MECHANIC: VERY GOOD:
OPTICAL CONDITION: VERY GOOD:
THE MACHINE CAN BE VIEWED UNDER CURRENT.:
89 160 1588
380 V - 50 HZ COLOUR: GREEN
ACCESSORIES:
* 3 AXIS HEIDENHAIN DIGITAL DISPLAY VRZ 773
* MULTIFIX TOOL HOLDER SIZE A WITH 6 INLETS
* PUNCH POINT - REVOLVING (NEW)
* PUNCH POINT - FIX
* BISON 3-JAW CHUCK 160 MM
* PLIERS TUBING
* COOLING EQUIPMENT
* MACHINE SHOES
* PROTECTION FROM SHAVINGS WASTE FOLDING, ELECTRICALLY CONTROLLED

* OPERATING MANUAL, SPARE PARTS LIST, WIRING DIAGRAMM, OPERATION KEYS


THE MACHINE HAS BEEN TESTED IN OUR REPAIR DEPARTMENT INCLUDING ELECTRICAL
TESTING REPORT!




Vendedor: Ralf Schmeißer Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-1 x crane end carriage made by nehles<br> <br>length: appr. 2.40 m<br>capacity: 9 tons <br> <br>like new 1 X CRANE END CARRIAGE MADE BY NEHLES

LENGTH: APPR. 2.40 M
CAPACITY: 9 TONS

LIKE NEW
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-holac

type: aut 30 he

efficiency up to 2800 kg/h

installed power: 7.5 kw

one cutting set:

integrated loader  HOLAC TYPE: AUT 30 HE EFFICIENCY UP TO 2800 KG/H INSTALLED POWER: 7.5 KW ONE CUTTING SET: INTEGRATED LOADER
Vendedor: BmgTrade
Año de construcción: usado
Precio: 2.700 €
Ubicación: Land-: 38 x 1,5 mm<br/>: 38 x 1,5 mm<br/>: 35 x 3 mm<br/>: 30 x 2 mm<br/>: 35 x 1,5 mm<br/>: 42 x 1,5 mm<br/>: 42 x 1,5 mm<br/>: 50 x 2 mm<br/>: 50 x 2 mm<br/>: 50 x 4 mm<br/>: 20 mm<br/>: 180 °<br/>: 300 mm<br/>: 245 mm<br/>: 320 mm<br/>: 23 kg<br/>demomachine<br/><br/>digital preseting of bending angle 0 - 180° <br/>one phase motor 220 v/ 900 watt <br/>electrical motor brake <br/>overload signal lamp <br/>stand made of cast iron <br/>prepared for fixing on a tripod (not included)<br/>90° bending in 6 sec.<br/><br/>options aigainst additional price:<br/><br/>tripod ? 170,-<br/><br/>machine with tool kit for tubes   md070mkgs  ? 3.400,-<br/>½?gas r46,  ¾?gas r56,  1?gas r82<br/><br/>maximum tube diameter: <br/>standard steel tube: 38 x 1,5 mm<br/>gas tube: 1", x 3,4<br/>furniture tube:	38 x 1,5 mm<br/>st35 hydraulic tube: 35 x 3 mm<br/>stainless steel tube aisi304-316: 30 x 2 mm<br/>stainless steel tube aisi308 (food industry): 35 x 1,5 mm<br/>soft brass: 42 x 1,5 mm<br/>hard copper and aluminium: 42 x 1,5 mm<br/>soft copper: 50 x 2 mm<br/>conduit-tubes (taz): 50 x 2 mm<br/>mepla, gebereit and similar tubes: 50 x 4 mm<br/>round bar: 20 mm <br/>maximum bending angle: 180° <br/>motor: 220v / 0,9 kw <br/>length: 300 mm <br/>width: 245 mm <br/>height: 320 mm  <br/>weight: 23 kg<br/><br/><br/><br/> : 38 X 1,5 MM
: 38 X 1,5 MM
: 35 X 3 MM
: 30 X 2 MM
: 35 X 1,5 MM
: 42 X 1,5 MM
: 42 X 1,5 MM
: 50 X 2 MM
: 50 X 2 MM
: 50 X 4 MM
: 20 MM
: 180 °
: 300 MM
: 245 MM
: 320 MM
: 23 KG
DEMOMACHINE

DIGITAL PRESETING OF BENDING ANGLE 0 - 180° 
ONE PHASE MOTOR 220 V/ 900 WATT 
ELECTRICAL MOTOR BRAKE 
OVERLOAD SIGNAL LAMP 
STAND MADE OF CAST IRON 
PREPARED FOR FIXING ON A TRIPOD (NOT INCLUDED)
90° BENDING IN 6 SEC.

OPTIONS AIGAINST ADDITIONAL PRICE:

TRIPOD ? 170,-

MACHINE WITH TOOL KIT FOR TUBES   MD070MKGS ? 3.400,-
½?GAS R46,  ¾?GAS R56,  1?GAS R82

MAXIMUM TUBE DIAMETER:
STANDARD STEEL TUBE: 38 X 1,5 MM
GAS TUBE: 1", X 3,4
FURNITURE TUBE: 38 X 1,5 MM
ST35 HYDRAULIC TUBE: 35 X 3 MM
STAINLESS STEEL TUBE AISI304-316: 30 X 2 MM
STAINLESS STEEL TUBE AISI308 (FOOD INDUSTRY): 35 X 1,5 MM
SOFT BRASS: 42 X 1,5 MM
HARD COPPER AND ALUMINIUM: 42 X 1,5 MM
SOFT COPPER: 50 X 2 MM
CONDUIT-TUBES (TAZ): 50 X 2 MM
MEPLA, GEBEREIT AND SIMILAR TUBES: 50 X 4 MM
ROUND BAR: 20 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR: 220V / 0,9 KW
LENGTH: 300 MM
WIDTH: 245 MM
HEIGHT: 320 MM
WEIGHT: 23 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more IAG types: