1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 7.960 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


universal cylindrical grinding machine mso-cincinnati
with internal grinding attachment

manufacturer: mso-cincinnati
type:  r 57
mach.-nr.: m 25956
year of construction: ??? / 03.2019 tüp.
comm.-nr.: 3990000/009
stock-nr.: 1899

+++ special price: old 9.950,- € | now 7.960,- €
+++ all prices are shown without taxes (net price)


the machine is suitable for:

* external grinding
* internal grinding
* surface grinding
* taper grinding
* chamfering
* angled flat grinding

 
technical data

(according to manufacturer)

centre height: 90 mm
swing-Ø: 180 mm
grinding length: 400 mm

grinding wheel

diameter: 350 mm
bore-Ø: 76 mm
largest width of grinding wheel for plunge grinding: 40 mm
largest total width of a grinding wheel set: 80 mm
largest sum of single widths: 40 mm
grinding wheel speed: 1.650 / 2.150 rpm = 30 m/s

grinding head

largest grinding head hub: 209 mm
largest hub by hand wheel: 67 mm
additional hub: 142 mm
autom. interval feed: 0,005 – 0,020 mm
feed by one revolution of hand wheel: 0,5 mm
feed by one hand wheel graduation mark: 0,005 mm
setting by tip-switch regarding diameter: 0,005 mm

internal grinding attachment

largest distance from front edge spindle headstock to grinding spidnle carrier: 620 mm
bore for carrying the spindle: 60 mm
largest grindable bore: 125 mm / maybe larger

headstock spindle

6 work-piece speeds, adjustable: 80 – 800 rpm
rotatability of headstock spindle against the grinding wheel: 90° / opposite side °45
spindle cone or inner taper of headstock spindle: mk 3

tailstock

inner cone of quill: mk 3
quill travel: 20 mm

table

largest table incline: 14°
largest cone angle: 28°
table speed: 0,0 – 7,0 m/min
rough travel by hand wheel: 1 revolution 20 mm, 1 graduation mark 0,40 mm
fine travel by hand wheel: 1 revolution 2,5 mm, 1 graduation mark 0,05 mm

total connected load: ca. 5 kw
weight: ca. 1.800 kg
standing area: w 1,70 x d 1,50 x h 1,60 m
color: blue / grey-white / red

 
features

* rotatable internal grinding attachment
* manual or automatic operation
* self-feeding up to 0-limit
* grinding wheel fine adjustment
* automatic feed works as piercing feed, without feed, table-dependant feed
* only right / left and right / only left
* upper table for tamper grinding with fine feed and measuring clock
* bedway is lubricated by re-oil
* tailstock can be activated by mechanical lever
* attachment with measuring clock for table pivoting up to 14°
* headstock spindle pivotable up to 90/45°
* grinding head pivotable up to 360°
* grinding head two speeds
* free-standing liquid cooling system, mobile
* splash guards
* grinding wheel flanges with wheels
* internal grinding spindle with cone attachment and extraction threading
* internal cooling through work spindle on work piece during internal grinding
* adjustable straight and radial matching device with quick-fastening lever
* adjustable dressing device for grinding wheel, at tailstock
* adjustable side and diagonal dressing device with scale, for grinding wheel, with quick-release lever
* open lunette, adjustable
* three-chuck-fastening buffer forkhardt Ø 125 mm, with spindle receiver flange (unused)
* fastening clamp device with spindle recevier, fastening clamp set 32 pieces
* grinding thorns for internal grinding in various sizes
* number of retreiving-hearts in various sizes
* number of internal grinding spindles in various sizes
* number of spreading thorns in various sizes


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation. %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! UNIVERSAL CYLINDRICAL GRINDING MACHINE MSO-CINCINNATI WITH INTERNAL GRINDING ATTACHMENT MANUFACTURER: MSO-CINCINNATI TYPE: R 57 MACH.-NR.: M 25956 YEAR OF CONSTRUCTION: ??? / 03.2019 TüP. COMM.-NR.: 3990000/009 STOCK-NR.: 1899 +++ SPECIAL PRICE: OLD 9.950,- € | NOW 7.960,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE IS SUITABLE FOR: * EXTERNAL GRINDING * INTERNAL GRINDING * SURFACE GRINDING * TAPER GRINDING * CHAMFERING * ANGLED FLAT GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) CENTRE HEIGHT: 90 MM SWING-Ø: 180 MM GRINDING LENGTH: 400 MM GRINDING WHEEL DIAMETER: 350 MM BORE-Ø: 76 MM LARGEST WIDTH OF GRINDING WHEEL FOR PLUNGE GRINDING: 40 MM LARGEST TOTAL WIDTH OF A GRINDING WHEEL SET: 80 MM LARGEST SUM OF SINGLE WIDTHS: 40 MM GRINDING WHEEL SPEED: 1.650 / 2.150 RPM = 30 M/S GRINDING HEAD LARGEST GRINDING HEAD HUB: 209 MM LARGEST HUB BY HAND WHEEL: 67 MM ADDITIONAL HUB: 142 MM AUTOM. INTERVAL FEED: 0,005 – 0,020 MM FEED BY ONE REVOLUTION OF HAND WHEEL: 0,5 MM FEED BY ONE HAND WHEEL GRADUATION MARK: 0,005 MM SETTING BY TIP-SWITCH REGARDING DIAMETER: 0,005 MM INTERNAL GRINDING ATTACHMENT LARGEST DISTANCE FROM FRONT EDGE SPINDLE HEADSTOCK TO GRINDING SPIDNLE CARRIER: 620 MM BORE FOR CARRYING THE SPINDLE: 60 MM LARGEST GRINDABLE BORE: 125 MM / MAYBE LARGER HEADSTOCK SPINDLE 6 WORK-PIECE SPEEDS, ADJUSTABLE: 80 – 800 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° / OPPOSITE SIDE °45 SPINDLE CONE OR INNER TAPER OF HEADSTOCK SPINDLE: MK 3 TAILSTOCK INNER CONE OF QUILL: MK 3 QUILL TRAVEL: 20 MM TABLE LARGEST TABLE INCLINE: 14° LARGEST CONE ANGLE: 28° TABLE SPEED: 0,0 – 7,0 M/MIN ROUGH TRAVEL BY HAND WHEEL: 1 REVOLUTION 20 MM, 1 GRADUATION MARK 0,40 MM FINE TRAVEL BY HAND WHEEL: 1 REVOLUTION 2,5 MM, 1 GRADUATION MARK 0,05 MM TOTAL CONNECTED LOAD: CA. 5 KW WEIGHT: CA. 1.800 KG STANDING AREA: W 1,70 X D 1,50 X H 1,60 M COLOR: BLUE / GREY-WHITE / RED FEATURES * ROTATABLE INTERNAL GRINDING ATTACHMENT * MANUAL OR AUTOMATIC OPERATION * SELF-FEEDING UP TO 0-LIMIT * GRINDING WHEEL FINE ADJUSTMENT * AUTOMATIC FEED WORKS AS PIERCING FEED, WITHOUT FEED, TABLE-DEPENDANT FEED * ONLY RIGHT / LEFT AND RIGHT / ONLY LEFT * UPPER TABLE FOR TAMPER GRINDING WITH FINE FEED AND MEASURING CLOCK * BEDWAY IS LUBRICATED BY RE-OIL * TAILSTOCK CAN BE ACTIVATED BY MECHANICAL LEVER * ATTACHMENT WITH MEASURING CLOCK FOR TABLE PIVOTING UP TO 14° * HEADSTOCK SPINDLE PIVOTABLE UP TO 90/45° * GRINDING HEAD PIVOTABLE UP TO 360° * GRINDING HEAD TWO SPEEDS * FREE-STANDING LIQUID COOLING SYSTEM, MOBILE * SPLASH GUARDS * GRINDING WHEEL FLANGES WITH WHEELS * INTERNAL GRINDING SPINDLE WITH CONE ATTACHMENT AND EXTRACTION THREADING * INTERNAL COOLING THROUGH WORK SPINDLE ON WORK PIECE DURING INTERNAL GRINDING * ADJUSTABLE STRAIGHT AND RADIAL MATCHING DEVICE WITH QUICK-FASTENING LEVER * ADJUSTABLE DRESSING DEVICE FOR GRINDING WHEEL, AT TAILSTOCK * ADJUSTABLE SIDE AND DIAGONAL DRESSING DEVICE WITH SCALE, FOR GRINDING WHEEL, WITH QUICK-RELEASE LEVER * OPEN LUNETTE, ADJUSTABLE * THREE-CHUCK-FASTENING BUFFER FORKHARDT Ø 125 MM, WITH SPINDLE RECEIVER FLANGE (UNUSED) * FASTENING CLAMP DEVICE WITH SPINDLE RECEVIER, FASTENING CLAMP SET 32 PIECES * GRINDING THORNS FOR INTERNAL GRINDING IN VARIOUS SIZES * NUMBER OF RETREIVING-HEARTS IN VARIOUS SIZES * NUMBER OF INTERNAL GRINDING SPINDLES IN VARIOUS SIZES * NUMBER OF SPREADING THORNS IN VARIOUS SIZES * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Precio: 3.625 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 2.000.000 €
Ubicación: Land-complete late model power generation plant 

for immediate sale

plant consists of (4) identical 1997 6.5mw generator sets using wartsila vasa 18v32 ln diesel engines as prime movers driving abb hsg 900xs8 type generators generating 26mw total electrical power

including but not limited to the following systems: electric, fuel, lubricating oil, starting compressed air, control air, cooling water, charge air & exhaust gas, flew gas washing, steam, fire alarm & fire-fighting systems

station nominal output: 26 mw

generator nominal output: 8,125 kva 

generator voltage: 11kv+- 5%

frequency: 50 hz

auxiliary voltage: 415 v ac, 110 v dc

fuel type: heavy fuel oil (hfo)/diesel

manufactured 1997; installed and under power 1998

total current operational hours: 59,000+/-
	
in-plant, under power




 COMPLETE LATE MODEL POWER GENERATION PLANT FOR IMMEDIATE SALE PLANT CONSISTS OF (4) IDENTICAL 1997 6.5MW GENERATOR SETS USING WARTSILA VASA 18V32 LN DIESEL ENGINES AS PRIME MOVERS DRIVING ABB HSG 900XS8 TYPE GENERATORS GENERATING 26MW TOTAL ELECTRICAL POWER INCLUDING BUT NOT LIMITED TO THE FOLLOWING SYSTEMS: ELECTRIC, FUEL, LUBRICATING OIL, STARTING COMPRESSED AIR, CONTROL AIR, COOLING WATER, CHARGE AIR & EXHAUST GAS, FLEW GAS WASHING, STEAM, FIRE ALARM & FIRE-FIGHTING SYSTEMS STATION NOMINAL OUTPUT: 26 MW GENERATOR NOMINAL OUTPUT: 8,125 KVA GENERATOR VOLTAGE: 11KV+- 5% FREQUENCY: 50 HZ AUXILIARY VOLTAGE: 415 V AC, 110 V DC FUEL TYPE: HEAVY FUEL OIL (HFO)/DIESEL MANUFACTURED 1997; INSTALLED AND UNDER POWER 1998 TOTAL CURRENT OPERATIONAL HOURS: 59,000+/- IN-PLANT, UNDER POWER
Vendedor: Meco ltd.
Año de construcción: usado
Precio: 27.000 EU€
Ubicación: Land-the machine is a special four-roller winder, intended for folding sheets al m. al. reflector. it has 3 independent lower rollers shortening the time to a minimum roll. the rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. compensation of sagging upper roller is realized by longitudinal beam. all rollers are driven. the spinning process is carried out without slip to prevent scratching of the workpiece. cnc - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. all rolls are chrome-plated and polished. all axes are programmable. the machine has the possibility of rolling difficult elliptical shapes. THE MACHINE IS A SPECIAL FOUR-ROLLER WINDER, INTENDED FOR FOLDING SHEETS AL M. AL. REFLECTOR. IT HAS 3 INDEPENDENT LOWER ROLLERS SHORTENING THE TIME TO A MINIMUM ROLL. THE ROLLERS ARE SUPPORTED BY ADJUSTABLE, BEARINGS SLIDES FOR EASY COMPENSATION OF THE DEFLECTION DEPENDING ON THE THICKNESS AND HARDNESS OF THE MATERIAL. COMPENSATION OF SAGGING UPPER ROLLER IS REALIZED BY LONGITUDINAL BEAM. ALL ROLLERS ARE DRIVEN. THE SPINNING PROCESS IS CARRIED OUT WITHOUT SLIP TO PREVENT SCRATCHING OF THE WORKPIECE. CNC - EQUIPPED WITH AN INTERPOLATION, IT IS A SIMULTANEOUS ROTATION BENDING ROLLS, ALONG WITH THEIR SHIFT. ALL ROLLS ARE CHROME-PLATED AND POLISHED. ALL AXES ARE PROGRAMMABLE. THE MACHINE HAS THE POSSIBILITY OF ROLLING DIFFICULT ELLIPTICAL SHAPES.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: 7.438 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-max. size 46 x 64 cm
age 1979
single sheet feeder
conventional dampening
register system bacher 425 mm
dry sprayer
delivery time: 3 - 4 weeks
ref: he190069a

please ask for price.

we ship and install worldwide! MAX. SIZE 46 X 64 CM AGE 1979 SINGLE SHEET FEEDER CONVENTIONAL DAMPENING REGISTER SYSTEM BACHER 425 MM DRY SPRAYER DELIVERY TIME: 3 - 4 WEEKS REF: HE190069A PLEASE ASK FOR PRICE. WE SHIP AND INSTALL WORLDWIDE!
Vendedor: Altmann Graphische Maschinen GmbH
Año de construcción: usado
Precio: 6.900 EU€
Ubicación: Land-the machine has two tables to the pallet nailing. while nailing pallets on one form, the personnel operating the machine are arranged to another pallet on the second form, and so alternately. such a work system provides full use of the machine to operate. the using of the machine requires two employees. THE MACHINE HAS TWO TABLES TO THE PALLET NAILING. WHILE NAILING PALLETS ON ONE FORM, THE PERSONNEL OPERATING THE MACHINE ARE ARRANGED TO ANOTHER PALLET ON THE SECOND FORM, AND SO ALTERNATELY. SUCH A WORK SYSTEM PROVIDES FULL USE OF THE MACHINE TO OPERATE. THE USING OF THE MACHINE REQUIRES TWO EMPLOYEES.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-ideal csr typ. 201 - 21
wire mesh production line csr 
project jig welding machine
year of manufacture 1996
switch / control cabinet
kva125
made in germany 
control: w/siemens handheld computer control
mounted in enclosed wire cage safety structure 
the coordinate welding machine csr 201 is used for resisting point welding of sheet metal and wire products in stencils:
work-piece dimensions:
length max.1800 mm
width max. 750 mm
nldw7
height max. 200 mm

x-axis for driving the welding unit according to the work piece length, with a base frame, hardened liner guides, serrated toothed rack system and servomotor with incremental encoder, travel max. 1800mm programmable, max. travel speed 1500 mm / s positioning accuracy +/- 0.2mm
y axis
for driving the welding unit according to work piece width, with hardened linear guides, rack system and rotary servo motor with incremental encoder, travel max. 750 mm programmable, max. driving speed 1500mm / s positioning accuracy +/- 0.2mm
c console
for holding the welding cylinder, size 750mm
welding cylinder lower pneumatic cylinder: electrode force 5900n (5bar) stroke 0-50 mm, with mechanical stroke adjustment upper pneumatic cylinder: electrode force 5.900n (5bar), total stroke 210mm
versaweld  IDEAL CSR TYP. 201 - 21 WIRE MESH PRODUCTION LINE CSR PROJECT JIG WELDING MACHINE YEAR OF MANUFACTURE 1996 SWITCH / CONTROL CABINET KVA125 MADE IN GERMANY CONTROL: W/SIEMENS HANDHELD COMPUTER CONTROL MOUNTED IN ENCLOSED WIRE CAGE SAFETY STRUCTURE THE COORDINATE WELDING MACHINE CSR 201 IS USED FOR RESISTING POINT WELDING OF SHEET METAL AND WIRE PRODUCTS IN STENCILS: WORK-PIECE DIMENSIONS: LENGTH MAX.1800 MM WIDTH MAX. 750 MM NLDW7 HEIGHT MAX. 200 MM X-AXIS FOR DRIVING THE WELDING UNIT ACCORDING TO THE WORK PIECE LENGTH, WITH A BASE FRAME, HARDENED LINER GUIDES, SERRATED TOOTHED RACK SYSTEM AND SERVOMOTOR WITH INCREMENTAL ENCODER, TRAVEL MAX. 1800MM PROGRAMMABLE, MAX. TRAVEL SPEED 1500 MM / S POSITIONING ACCURACY +/- 0.2MM Y AXIS FOR DRIVING THE WELDING UNIT ACCORDING TO WORK PIECE WIDTH, WITH HARDENED LINEAR GUIDES, RACK SYSTEM AND ROTARY SERVO MOTOR WITH INCREMENTAL ENCODER, TRAVEL MAX. 750 MM PROGRAMMABLE, MAX. DRIVING SPEED 1500MM / S POSITIONING ACCURACY +/- 0.2MM C CONSOLE FOR HOLDING THE WELDING CYLINDER, SIZE 750MM WELDING CYLINDER LOWER PNEUMATIC CYLINDER: ELECTRODE FORCE 5900N (5BAR) STROKE 0-50 MM, WITH MECHANICAL STROKE ADJUSTMENT UPPER PNEUMATIC CYLINDER: ELECTRODE FORCE 5.900N (5BAR), TOTAL STROKE 210MM VERSAWELD
Vendedor: Silicon plus
Año de construcción: usado
Ubicación: Land-type delta blower gm 4s, no 849591, new 2005, blower (1x) make aerzener maschinenfabrik gmbh, capacity 5,0 m3/min, pressure build up 1 bar, motor 7,5 kw, 400/690 volt, floorspace 1,9x1,0 m, total height 1,3 m, weight 550 kgblowersblowers > blowers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! TYPE DELTA BLOWER GM 4S, NO 849591, NEW 2005, BLOWER (1X) MAKE AERZENER MASCHINENFABRIK GMBH, CAPACITY 5,0 M3/MIN, PRESSURE BUILD UP 1 BAR, MOTOR 7,5 KW, 400/690 VOLT, FLOORSPACE 1,9X1,0 M, TOTAL HEIGHT 1,3 M, WEIGHT 550 KGBLOWERSBLOWERS > BLOWERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-cutting machine ideal 52
with programs
with spare blades
with attachments CUTTING MACHINE IDEAL 52 WITH PROGRAMS WITH SPARE BLADES WITH ATTACHMENTS
Vendedor: D&D Sofort & Schnelldruck
Año de construcción: usado
Ubicación: Land-5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude  \r\ndivider + rounder, type mus - g 5, model 1998\r\n   doughweightrange max. 150 g\r\n    include moulding drum 74 -85 g\r\nintermediate proofer, type zgl5/273/360,\r\n    proofing time approx.10 min.\r\nstamping unit, type fst 5/50\r\nfinal proofer type sg 0,6/1010/950,\r\n    proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm 5 ROWS, CAP. MAX. 8.200 PCS./H, MODEL 1989/1990,\R\NINCLUDE \R\NDIVIDER + ROUNDER, TYPE MUS - G 5, MODEL 1998\R\N DOUGHWEIGHTRANGE MAX. 150 G\R\N INCLUDE MOULDING DRUM 74 -85 G\R\NINTERMEDIATE PROOFER, TYPE ZGL5/273/360,\R\N PROOFING TIME APPROX.10 MIN.\R\NSTAMPING UNIT, TYPE FST 5/50\R\NFINAL PROOFER TYPE SG 0,6/1010/950,\R\N PROOFING TIME APPROX.35 MIN.\R\NAIRCONDITIONING\R\NDEPOSITING DEVICE, WIDTH 600 MM, MAX. LENGTH 800 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-spot & projection welding machine
posiweld by schlatter 
model: orion megaflex 3
with nc controlled x and y axes
+ machine positioning system y
+ rotary indexing table with 2 positions
+ siemens control cabinet
made in switzerland
year 2002
ce norm
power rating max.214kwa
working pressure 5.5bar
belh2f0rgq
axes:
x-1600mm
y-700mm
z1-250mm
z2-120mm
c1-c2 from 0-180°
all axes are driven by ac servomotors
machines are now located in winterlingen/germany
it is from running production.
on stock also 2 ideal mesh welders:
ideal csr 201 project welding machine year 1996
ideal mesh welder pgs 140-12 year 1995  SPOT & PROJECTION WELDING MACHINE POSIWELD BY SCHLATTER MODEL: ORION MEGAFLEX 3 WITH NC CONTROLLED X AND Y AXES + MACHINE POSITIONING SYSTEM Y + ROTARY INDEXING TABLE WITH 2 POSITIONS + SIEMENS CONTROL CABINET MADE IN SWITZERLAND YEAR 2002 CE NORM POWER RATING MAX.214KWA WORKING PRESSURE 5.5BAR BELH2F0RGQ AXES: X-1600MM Y-700MM Z1-250MM Z2-120MM C1-C2 FROM 0-180° ALL AXES ARE DRIVEN BY AC SERVOMOTORS MACHINES ARE NOW LOCATED IN WINTERLINGEN/GERMANY IT IS FROM RUNNING PRODUCTION. ON STOCK ALSO 2 IDEAL MESH WELDERS: IDEAL CSR 201 PROJECT WELDING MACHINE YEAR 1996 IDEAL MESH WELDER PGS 140-12 YEAR 1995
Vendedor: Silicon plus
Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-core d20a, lathe comes from a training workshop (total 3 machines are available of this type) state very well, with
guard / not cleaned off and glass scales and digital display of mitutoyo, central lubrication system, guided tours and refinished, dovetail guides at the flat after scraped, set games.
mechanics tested new, paint, chip wall back, chip tray below, guard with emergency off, tailstock, 3 jaw chuck, little water, chuck key, lighting
tip height 200 mm, centre distance 1000 mm, max.drehdurchmesser 600 mm, over bed 420 mm, over carriage bed width 260 mm, 300 mm,.
sale only to professionals
used, tested - so how you is, can be tested under power and visited
under exclusion of any warranty and guarantee there second-hand machine

free loading on trucks from location, shipment arrangement, placement and set up on request possible
available immediately CORE D20A, LATHE COMES FROM A TRAINING WORKSHOP (TOTAL 3 MACHINES ARE AVAILABLE OF THIS TYPE) STATE VERY WELL, WITH GUARD / NOT CLEANED OFF AND GLASS SCALES AND DIGITAL DISPLAY OF MITUTOYO, CENTRAL LUBRICATION SYSTEM, GUIDED TOURS AND REFINISHED, DOVETAIL GUIDES AT THE FLAT AFTER SCRAPED, SET GAMES. MECHANICS TESTED NEW, PAINT, CHIP WALL BACK, CHIP TRAY BELOW, GUARD WITH EMERGENCY OFF, TAILSTOCK, 3 JAW CHUCK, LITTLE WATER, CHUCK KEY, LIGHTING TIP HEIGHT 200 MM, CENTRE DISTANCE 1000 MM, MAX.DREHDURCHMESSER 600 MM, OVER BED 420 MM, OVER CARRIAGE BED WIDTH 260 MM, 300 MM,. SALE ONLY TO PROFESSIONALS USED, TESTED - SO HOW YOU IS, CAN BE TESTED UNDER POWER AND VISITED UNDER EXCLUSION OF ANY WARRANTY AND GUARANTEE THERE SECOND-HAND MACHINE FREE LOADING ON TRUCKS FROM LOCATION, SHIPMENT ARRANGEMENT, PLACEMENT AND SET UP ON REQUEST POSSIBLE AVAILABLE IMMEDIATELY
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Ubicación: Land-stainless steel construction, hopper contains approx. 240 kg dough, hopper inside teflon coated, knife for cutting the dough, feeding control by fotocell \r\ndimension: h 2850 , w 1450 ,  l  2100 mm\r\ndistance between hopper / floor 1950 mm\r\n STAINLESS STEEL CONSTRUCTION, HOPPER CONTAINS APPROX. 240 KG DOUGH, HOPPER INSIDE TEFLON COATED, KNIFE FOR CUTTING THE DOUGH, FEEDING CONTROL BY FOTOCELL \R\NDIMENSION: H 2850 , W 1450 , L 2100 MM\R\NDISTANCE BETWEEN HOPPER / FLOOR 1950 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-ideal pgs typ.140-12 hft 50-20
mesh welder
year of manufacture 1995
photoelectric sensor
mounted in enclosed wire cage
safety structure, grid housing
adjustable welding cylinder 12 pieces
welding force 10 kn, with control
welding panel, welding programs
machine fencing area dimensions 7.600 x 5.800 x 2000 mm
weight cca 5 ton
including complete safety fencing area IDEAL PGS TYP.140-12 HFT 50-20 MESH WELDER YEAR OF MANUFACTURE 1995 PHOTOELECTRIC SENSOR MOUNTED IN ENCLOSED WIRE CAGE SAFETY STRUCTURE, GRID HOUSING ADJUSTABLE WELDING CYLINDER 12 PIECES WELDING FORCE 10 KN, WITH CONTROL WELDING PANEL, WELDING PROGRAMS MACHINE FENCING AREA DIMENSIONS 7.600 X 5.800 X 2000 MM WEIGHT CCA 5 TON INCLUDING COMPLETE SAFETY FENCING AREA
Vendedor: Silicon plus
Año de construcción: usado
Precio: 46.000 €
Ubicación: Land--year 2000

-only 14 mil. real copies, one single owner

-two colours straight max size 72x102 cms.

-alcolor dampening, baldwin cooling system

-powder spray graphics junior

-electro-mechanical double sheet control 

-electronic side-lay control 

-quick action plate clamps, plate punch

-complete with all standard accessories , excellent conditions

-test and inspection on request
 -YEAR 2000 -ONLY 14 MIL. REAL COPIES, ONE SINGLE OWNER -TWO COLOURS STRAIGHT MAX SIZE 72X102 CMS. -ALCOLOR DAMPENING, BALDWIN COOLING SYSTEM -POWDER SPRAY GRAPHICS JUNIOR -ELECTRO-MECHANICAL DOUBLE SHEET CONTROL -ELECTRONIC SIDE-LAY CONTROL -QUICK ACTION PLATE CLAMPS, PLATE PUNCH -COMPLETE WITH ALL STANDARD ACCESSORIES , EXCELLENT CONDITIONS -TEST AND INSPECTION ON REQUEST
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-dimension of wafer sheets 360 x 450 mm\r\n1.  cut 32 mm \r\n2.  cut 30 mm\r\nstacking height approx. 5 - 80 mm\r\n DIMENSION OF WAFER SHEETS 360 X 450 MM\R\N1. CUT 32 MM \R\N2. CUT 30 MM\R\NSTACKING HEIGHT APPROX. 5 - 80 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-paternoster down stack machine for scantlings, planks or strips stacked length approx. 450-5,000 mm stacked width 800 mm stack height approx. 1,750 mm side stand/support arms 2 piece side stand adjustable up to 1,700 mm
load capacity 100 kg / location performance 20 cycles/min. 
bar magazine 2 piece
 PATERNOSTER DOWN STACK MACHINE FOR SCANTLINGS, PLANKS OR STRIPS STACKED LENGTH APPROX. 450-5,000 MM STACKED WIDTH 800 MM STACK HEIGHT APPROX. 1,750 MM SIDE STAND/SUPPORT ARMS 2 PIECE SIDE STAND ADJUSTABLE UP TO 1,700 MM LOAD CAPACITY 100 KG / LOCATION PERFORMANCE 20 CYCLES/MIN. BAR MAGAZINE 2 PIECE
Vendedor: Dematech s.r.o
Año de construcción: usado
Ubicación: Land-automatic, working width 420 mm, thickness 10 mm,\r\nlubrication system for the knives\r\n AUTOMATIC, WORKING WIDTH 420 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
brush sanding machine / edge grinding machine lã?wer topspin k

2002, very good condition
edge finish machine with an air cushion table.
for the edging. ideally suited for the finish - and intermediate lacquer sanding
brush diameter 220 mm, clamping height 160 mm
brush approx. 200 mm, fore aft approximately 200 mm, adjustable in height 45â°-90 â° swivel
roller speed infinitely variable, with frequency converter 150-1400 rpm
air cushion table with side channel blowers for work and prevent scratches.
table length 4100 mm, width 700 mm
chassis with castors
sanding drum can be fitted by the operator. the sanding paper pad are inserted individually. new system with wider bristle support.
grinding motor 0.75 kw
2 x home pressure compressor for the air cushion table per 0.95 kw miscellaneous new and used abrasive material to the insertion of the brush.

transport dimensions 4100 x 900 x 1000 mm, 250 kg

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: in stock our general terms and conditions apply

BRUSH SANDING MACHINE / EDGE GRINDING MACHINE L�WER TOPSPIN K 2002, VERY GOOD CONDITION EDGE FINISH MACHINE WITH AN AIR CUSHION TABLE. FOR THE EDGING. IDEALLY SUITED FOR THE FINISH - AND INTERMEDIATE LACQUER SANDING BRUSH DIAMETER 220 MM, CLAMPING HEIGHT 160 MM BRUSH APPROX. 200 MM, FORE AFT APPROXIMATELY 200 MM, ADJUSTABLE IN HEIGHT 45°-90 ° SWIVEL ROLLER SPEED INFINITELY VARIABLE, WITH FREQUENCY CONVERTER 150-1400 RPM AIR CUSHION TABLE WITH SIDE CHANNEL BLOWERS FOR WORK AND PREVENT SCRATCHES. TABLE LENGTH 4100 MM, WIDTH 700 MM CHASSIS WITH CASTORS SANDING DRUM CAN BE FITTED BY THE OPERATOR. THE SANDING PAPER PAD ARE INSERTED INDIVIDUALLY. NEW SYSTEM WITH WIDER BRISTLE SUPPORT. GRINDING MOTOR 0.75 KW 2 X HOME PRESSURE COMPRESSOR FOR THE AIR CUSHION TABLE PER 0.95 KW MISCELLANEOUS NEW AND USED ABRASIVE MATERIAL TO THE INSERTION OF THE BRUSH. TRANSPORT DIMENSIONS 4100 X 900 X 1000 MM, 250 KG HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-stainless steel construction, hopper contains approx. 240 kg dough, hopper inside teflon coated, knife for cutting the dough, feeding control by fotocell \r\ndimension: h 2850 , w 1450 ,  l  2100 mm\r\ndistance between hopper / floor 1950 mm\r\n STAINLESS STEEL CONSTRUCTION, HOPPER CONTAINS APPROX. 240 KG DOUGH, HOPPER INSIDE TEFLON COATED, KNIFE FOR CUTTING THE DOUGH, FEEDING CONTROL BY FOTOCELL \R\NDIMENSION: H 2850 , W 1450 , L 2100 MM\R\NDISTANCE BETWEEN HOPPER / FLOOR 1950 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-profile milling and profile grinding machine brandt - arminius, specifically for stair construction

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

a video of the current machine can be sent on request.

ideal machine for stair builders and solid wood processor
5 units:
1 edge grinding unit with 120 mm band, pneumatic belt tension and electro-pneumatic controlled sanding shoe
2 milling units 1, 5kw to radius milling, swiveling
2 units of profile grinding with belt and electro-pneumatic controlled sanding shoe

secure workpiece clamping chain plates and upper pressure roller
workpiece thickness up to approx. 60 mm
adjustable feed speed
easy pull-out workpiece support
machine is currently equipped with milling cutters r8

operating instructions
ce mark
after painted in places
great machine with outstanding sanding results, hardly rework required. ideal for the efficient production of stairs or table tops.

dimensions approx. 4000 x 1300 x 1900mm (lxwxh). weight approx. 1200kg. 

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". PROFILE MILLING AND PROFILE GRINDING MACHINE BRANDT - ARMINIUS, SPECIFICALLY FOR STAIR CONSTRUCTION THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. IDEAL MACHINE FOR STAIR BUILDERS AND SOLID WOOD PROCESSOR 5 UNITS: 1 EDGE GRINDING UNIT WITH 120 MM BAND, PNEUMATIC BELT TENSION AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE 2 MILLING UNITS 1, 5KW TO RADIUS MILLING, SWIVELING 2 UNITS OF PROFILE GRINDING WITH BELT AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE SECURE WORKPIECE CLAMPING CHAIN PLATES AND UPPER PRESSURE ROLLER WORKPIECE THICKNESS UP TO APPROX. 60 MM ADJUSTABLE FEED SPEED EASY PULL-OUT WORKPIECE SUPPORT MACHINE IS CURRENTLY EQUIPPED WITH MILLING CUTTERS R8 OPERATING INSTRUCTIONS CE MARK AFTER PAINTED IN PLACES GREAT MACHINE WITH OUTSTANDING SANDING RESULTS, HARDLY REWORK REQUIRED. IDEAL FOR THE EFFICIENT PRODUCTION OF STAIRS OR TABLE TOPS. DIMENSIONS APPROX. 4000 X 1300 X 1900MM (LXWXH). WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-type muc, 4 rows, doughweightrange 28 - 95 g\r\nmoulding drum 50  -  58 g\r\ncap. approx. 4.800 pcs./h,\r\n TYPE MUC, 4 ROWS, DOUGHWEIGHTRANGE 28 - 95 G\R\NMOULDING DRUM 50 - 58 G\R\NCAP. APPROX. 4.800 PCS./H,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

in or off-line machine especially suited to splitting of perfect bound books when in double production format. comprising; 
infeed conveyors including telescopic unit 
magazine hopper capable of accepting books from a flow line or by manual loading 
automatic feeding of horizontally stacked books 
precise centring of books with adjustable guide rails 
control panel. 
straight delivery conveyor. 
available immediately 
good condition
inspection welcomed
full and complete WE ARE PLEASED TO OFFER: IN OR OFF-LINE MACHINE ESPECIALLY SUITED TO SPLITTING OF PERFECT BOUND BOOKS WHEN IN DOUBLE PRODUCTION FORMAT. COMPRISING; INFEED CONVEYORS INCLUDING TELESCOPIC UNIT MAGAZINE HOPPER CAPABLE OF ACCEPTING BOOKS FROM A FLOW LINE OR BY MANUAL LOADING AUTOMATIC FEEDING OF HORIZONTALLY STACKED BOOKS PRECISE CENTRING OF BOOKS WITH ADJUSTABLE GUIDE RAILS CONTROL PANEL. STRAIGHT DELIVERY CONVEYOR. AVAILABLE IMMEDIATELY GOOD CONDITION INSPECTION WELCOMED FULL AND COMPLETE
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-1 station, stainless steel, propan gas\r\nsizer: w/l  410, d 410, h 210 mm 1 STATION, STAINLESS STEEL, PROPAN GAS\R\NSIZER: W/L 410, D 410, H 210 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-technical data
 tip height 110 mm
 centre distance 300 mm
 swing over cross slide 115 mm
 spindle bore 32 mm
 sled:
 longitudinal travel (z axis) 295 mm
 plan travel (x-axis) 220 mm
 turret slide: number 1
 number of positions revolver 8
 sleeve diameter 35 mm
 spindle retainer: camlock
 spindle speeds:
 continuously variable from 30 rpm to 6000 rpm
 tailstock quill recording:
 morse taper 2 mk
 quill stroke 100 mm
 feeds: continuously variable
 length of 0.1 mm / min up to 5000 mm/min
 map of 0.1 mm / min up to 5000 mm/min
 rapid traverse 10 m / min
 kw spindle motor 5.50
 connection 50 hz 3 x 380 volt
 machine weight 1350 kg
 dimensions machine:
 length 1700 mm
 1942 mm wide
 1774 mm

miscellaneous accessories:
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 c axis with interpolation
 chip conveyor
 tool holder set
 driven tool holders
 collet chucks
 bucher TECHNICAL DATA TIP HEIGHT 110 MM CENTRE DISTANCE 300 MM SWING OVER CROSS SLIDE 115 MM SPINDLE BORE 32 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 295 MM PLAN TRAVEL (X-AXIS) 220 MM TURRET SLIDE: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 SLEEVE DIAMETER 35 MM SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE FROM 30 RPM TO 6000 RPM TAILSTOCK QUILL RECORDING: MORSE TAPER 2 MK QUILL STROKE 100 MM FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0.1 MM / MIN UP TO 5000 MM/MIN MAP OF 0.1 MM / MIN UP TO 5000 MM/MIN RAPID TRAVERSE 10 M / MIN KW SPINDLE MOTOR 5.50 CONNECTION 50 HZ 3 X 380 VOLT MACHINE WEIGHT 1350 KG DIMENSIONS MACHINE: LENGTH 1700 MM 1942 MM WIDE 1774 MM MISCELLANEOUS ACCESSORIES: LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 C AXIS WITH INTERPOLATION CHIP CONVEYOR TOOL HOLDER SET DRIVEN TOOL HOLDERS COLLET CHUCKS BUCHER
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-cap. 80 - 100 flour\r\ndimensions: 80 x 60 x 145 cm\r\nweight:       75 kg \r\n\r\n CAP. 80 - 100 FLOUR\R\NDIMENSIONS: 80 X 60 X 145 CM\R\NWEIGHT: 75 KG \R\N\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMAÃ?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: Â?¬225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: · LENGTH OF THE STREETS: CA 51M · HEIGHT OF THE SHELVES: CA 9, 3 M · SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: § NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS § DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM § SEKTORIERUNG OF THE SHELVES POSSIBLE · CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS · NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / · SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-with hardened steel cone grinder, plastic housing\r\nspeed​​: 330 rpm, continuously adjustable from coarse to fine\r\ncapacity: flakes 250 g / min., finely grinding about 220 g / min.\r\nall cereals and oilseeds, dry herbs and spices:\r\n WITH HARDENED STEEL CONE GRINDER, PLASTIC HOUSING\R\NSPEED​​: 330 RPM, CONTINUOUSLY ADJUSTABLE FROM COARSE TO FINE\R\NCAPACITY: FLAKES 250 G / MIN., FINELY GRINDING ABOUT 220 G / MIN.\R\NALL CEREALS AND OILSEEDS, DRY HERBS AND SPICES:\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machine type lathe - cycle controlled make gildemeister nef type plus 500 year 1998
control type cnc forkhart 315 mm three-back chuck
storage location eersel
country of origin germany delivery immediately cargo basis exw technical details
control heidenhain manual plus rotary diameter 500 mm turning diameter over slide 290 mm turning length 1000 mm plan route 250 mm chuck diameter of 260 mm spindle speeds gear-unit stage 1 80-250 1 rpm 
spindle speeds gear-unit stage 2 20-710 1/min. 
spindle speed gear level 3 80-2800 1/min. 
spindle drive 11 kw torque spindle 100% ed 1050 nm max spindle nose according to din 55027 - size 8 spindle bore 70 mm hollow cone of spindle nose metric 80 spindle diameter in the vord. camp 100 mm feed force longitudinal / plan 10 / 5 kn feed 5 m / min rapid traverse - longitudinal/plan 8 / 6 m / min tool holder multifix c tailstock quill diameter 80 mm tailstock hub 180 mm tailstock spindle mount mt 5 weight - machine 3.20 x 1.75 x 1.85 m additional information
grundig heidenhain manual plus control
 MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE GILDEMEISTER NEF TYPE PLUS 500 YEAR 1998 CONTROL TYPE CNC FORKHART 315 MM THREE-BACK CHUCK STORAGE LOCATION EERSEL COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASIS EXW TECHNICAL DETAILS CONTROL HEIDENHAIN MANUAL PLUS ROTARY DIAMETER 500 MM TURNING DIAMETER OVER SLIDE 290 MM TURNING LENGTH 1000 MM PLAN ROUTE 250 MM CHUCK DIAMETER OF 260 MM SPINDLE SPEEDS GEAR-UNIT STAGE 1 80-250 1 RPM SPINDLE SPEEDS GEAR-UNIT STAGE 2 20-710 1/MIN. SPINDLE SPEED GEAR LEVEL 3 80-2800 1/MIN. SPINDLE DRIVE 11 KW TORQUE SPINDLE 100% ED 1050 NM MAX SPINDLE NOSE ACCORDING TO DIN 55027 - SIZE 8 SPINDLE BORE 70 MM HOLLOW CONE OF SPINDLE NOSE METRIC 80 SPINDLE DIAMETER IN THE VORD. CAMP 100 MM FEED FORCE LONGITUDINAL / PLAN 10 / 5 KN FEED 5 M / MIN RAPID TRAVERSE - LONGITUDINAL/PLAN 8 / 6 M / MIN TOOL HOLDER MULTIFIX C TAILSTOCK QUILL DIAMETER 80 MM TAILSTOCK HUB 180 MM TAILSTOCK SPINDLE MOUNT MT 5 WEIGHT - MACHINE 3.20 X 1.75 X 1.85 M ADDITIONAL INFORMATION GRUNDIG HEIDENHAIN MANUAL PLUS CONTROL
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-for making rustic-square rolls, capacity approx. 7.000 pcs./h \r\ndoughweightrange 40 - 150 g - depends on the dough,\r\nstainless steel coverplates, righthand - operation\r\n2 flour duster at the infeed\r\nwithout electrical control pane FOR MAKING RUSTIC-SQUARE ROLLS, CAPACITY APPROX. 7.000 PCS./H \R\NDOUGHWEIGHTRANGE 40 - 150 G - DEPENDS ON THE DOUGH,\R\NSTAINLESS STEEL COVERPLATES, RIGHTHAND - OPERATION\R\N2 FLOUR DUSTER AT THE INFEED\R\NWITHOUT ELECTRICAL CONTROL PANE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-gildemeister ctx 200 s2
 year: 1998
 heidenhain machine is prepared for the bar magazine.

with many tool box ca. 50!
 workspace
-turndiam over coverage 440 mm
-turndiam 210 mm
 x travel 160 mm
 longitudinal travel z 350 mm
 tool carrier
 -universal disc turret - tool station number 12 vdi 30

tailstock
-quill 50mm
-quill stroke 120 mm
quill recording mk3

machine dimensions - chip conveyor lxwxh 3930x1651x1690mm
-weight approx. 3000kg

 GILDEMEISTER CTX 200 S2 YEAR: 1998 HEIDENHAIN MACHINE IS PREPARED FOR THE BAR MAGAZINE. WITH MANY TOOL BOX CA. 50! WORKSPACE -TURNDIAM OVER COVERAGE 440 MM -TURNDIAM 210 MM X TRAVEL 160 MM LONGITUDINAL TRAVEL Z 350 MM TOOL CARRIER -UNIVERSAL DISC TURRET - TOOL STATION NUMBER 12 VDI 30 TAILSTOCK -QUILL 50MM -QUILL STROKE 120 MM QUILL RECORDING MK3 MACHINE DIMENSIONS - CHIP CONVEYOR LXWXH 3930X1651X1690MM -WEIGHT APPROX. 3000KG
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-cylinder 30 l, cylinder inside stainless steel\r\n          dimensions: d 310 mm, h 400 mm CYLINDER 30 L, CYLINDER INSIDE STAINLESS STEEL\R\N DIMENSIONS: D 310 MM, H 400 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-type	lm 1300
working width of glue rollers (can apply glue on both sides) 1300 mm	
ce mark	
made in denmark in 1995 y.	
transport dimensions	1700x800x1000 mm
weight	 200 kg

 TYPE LM 1300 WORKING WIDTH OF GLUE ROLLERS (CAN APPLY GLUE ON BOTH SIDES) 1300 MM CE MARK MADE IN DENMARK IN 1995 Y. TRANSPORT DIMENSIONS 1700X800X1000 MM WEIGHT 200 KG
Vendedor: MEDIENOS STAKLES, UAB
Año de construcción: usado
Ubicación: Land-semi automatic, working width 400 mm, thickness 10 mm,\r\nlubrication system for the knives SEMI AUTOMATIC, WORKING WIDTH 400 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-3000 x 1500 mm with pallet changer, byloader, updated monitor,
cooler, filter, 5 + 7, 5 cutting head, sick light barrier, on time 63973, cutting time 31200, turbo and glass revision at cutting time 22787 hours.
in really good condition, working in production, can be delivered august 2019, service made in march 2019 
 3000 X 1500 MM WITH PALLET CHANGER, BYLOADER, UPDATED MONITOR, COOLER, FILTER, 5 + 7, 5 CUTTING HEAD, SICK LIGHT BARRIER, ON TIME 63973, CUTTING TIME 31200, TURBO AND GLASS REVISION AT CUTTING TIME 22787 HOURS. IN REALLY GOOD CONDITION, WORKING IN PRODUCTION, CAN BE DELIVERED AUGUST 2019, SERVICE MADE IN MARCH 2019
Vendedor: K N Machinery
Año de construcción: usado
Ubicación: Land-type 28 m / 50 / oil, lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 2,5 - 10 mm\r\ncapacity  220 slices/min. TYPE 28 M / 50 / OIL, LUBRICATION SLICER BLADE\R\NMOON SHAPED BLADE, THICKNESS ADJUSTABLE APPROX. 2,5 - 10 MM\R\NCAPACITY 220 SLICES/MIN.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used dmg gildemeister twin 65 with y-b axis
control siemens 840 d powerline

technical data:
max. swing diameter  mm 250
max. turning diameter  mm 200
spindle distance mm 900

main spindle
max speed min-1 5,000
max bar passage mm 66

counter spindle
max speed min-1 5,000
maximum partial bar passage 66 x 650 mm
travel x-z axis mm 175 / 670
tailstock mounted taper mt 4

2 turrets with driven tools
speed driven tools min-1 4,000

slide 1 (top turret)
travel x - z axis mm 300 / 600
travel y mm +/-40
swing angle b axis (turret) degree -135°/+ 45°

slide 2 (lower turret)
travel path x - z axis mm 180 / 650

accessories:
y axis upper turret
b-axis upper turret
tailstock on counter spindle slide
workpiece - pickup equipment with gripper and conveyor belt
collet chuck on main and sub spindle
short rod feeder
chip conveyor
increased coolant system 20 bar  USED DMG GILDEMEISTER TWIN 65 WITH Y-B AXIS CONTROL SIEMENS 840 D POWERLINE TECHNICAL DATA: MAX. SWING DIAMETER MM 250 MAX. TURNING DIAMETER MM 200 SPINDLE DISTANCE MM 900 MAIN SPINDLE MAX SPEED MIN-1 5,000 MAX BAR PASSAGE MM 66 COUNTER SPINDLE MAX SPEED MIN-1 5,000 MAXIMUM PARTIAL BAR PASSAGE 66 X 650 MM TRAVEL X-Z AXIS MM 175 / 670 TAILSTOCK MOUNTED TAPER MT 4 2 TURRETS WITH DRIVEN TOOLS SPEED DRIVEN TOOLS MIN-1 4,000 SLIDE 1 (TOP TURRET) TRAVEL X - Z AXIS MM 300 / 600 TRAVEL Y MM +/-40 SWING ANGLE B AXIS (TURRET) DEGREE -135°/+ 45° SLIDE 2 (LOWER TURRET) TRAVEL PATH X - Z AXIS MM 180 / 650 ACCESSORIES: Y AXIS UPPER TURRET B-AXIS UPPER TURRET TAILSTOCK ON COUNTER SPINDLE SLIDE WORKPIECE - PICKUP EQUIPMENT WITH GRIPPER AND CONVEYOR BELT COLLET CHUCK ON MAIN AND SUB SPINDLE SHORT ROD FEEDER CHIP CONVEYOR INCREASED COOLANT SYSTEM 20 BAR
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-it is a used seewer rondo kombi dough sheeter sso 68 (stainless steel version) for sale. the machine is in very good condition, works and runs quietly, the bands are new.
technical data:
-strip width 620 mm
- overall width without dough drip tray: 2720 mm
-roller delivery: 4 programs manual can be switched on
- voltage: 400 v, 60 hz
a video can be sent on request.

price on request. IT IS A USED SEEWER RONDO KOMBI DOUGH SHEETER SSO 68 (STAINLESS STEEL VERSION) FOR SALE. THE MACHINE IS IN VERY GOOD CONDITION, WORKS AND RUNS QUIETLY, THE BANDS ARE NEW. TECHNICAL DATA: -STRIP WIDTH 620 MM - OVERALL WIDTH WITHOUT DOUGH DRIP TRAY: 2720 MM -ROLLER DELIVERY: 4 PROGRAMS MANUAL CAN BE SWITCHED ON - VOLTAGE: 400 V, 60 HZ A VIDEO CAN BE SENT ON REQUEST. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-working width 450 mm, thickness 10 mm,\r\nlubrication system for the knives WORKING WIDTH 450 MM, THICKNESS 10 MM,\R\NLUBRICATION SYSTEM FOR THE KNIVES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-3-roller bending machine (8 x 3,500 mm)
sma-ref-6397
category: bending machine
manufacturer: aws schã¤fer
type: srmv 3500/8
year of construction: 1986
rollers: upper roller: 286 mm
bottom roll: 286 mm
side rolls: 232 mm
working range: working width: 3,500 mm
sheet thickness: max 8 mm
on bending: 6 mm
condition: ready to use
location: north rhine-westphalia
dimensions:
weight: 10 t
availability: immediately
terms of delivery: from site
terms of payment: 100% prior to removal/loading 3-ROLLER BENDING MACHINE (8 X 3,500 MM) SMA-REF-6397 CATEGORY: BENDING MACHINE MANUFACTURER: AWS SCHäFER TYPE: SRMV 3500/8 YEAR OF CONSTRUCTION: 1986 ROLLERS: UPPER ROLLER: 286 MM BOTTOM ROLL: 286 MM SIDE ROLLS: 232 MM WORKING RANGE: WORKING WIDTH: 3,500 MM SHEET THICKNESS: MAX 8 MM ON BENDING: 6 MM CONDITION: READY TO USE LOCATION: NORTH RHINE-WESTPHALIA DIMENSIONS: WEIGHT: 10 T AVAILABILITY: IMMEDIATELY TERMS OF DELIVERY: FROM SITE TERMS OF PAYMENT: 100% PRIOR TO REMOVAL/LOADING
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-type allzweck 80,  oil  lubrication slicer blade\r\nmoon shaped blade, thickness adjustable approx. 3 - 15 mm\r\ncapacity  290 slices/min. TYPE ALLZWECK 80, OIL LUBRICATION SLICER BLADE\R\NMOON SHAPED BLADE, THICKNESS ADJUSTABLE APPROX. 3 - 15 MM\R\NCAPACITY 290 SLICES/MIN.
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-4 rolls bending machine (14 x 3,100 mm)
sma-ref-6409
category: bending machine
manufacturer: mg
type: mh 3014c.
year of manufacture: 2007
power: 7,5 kw
rollers:
upper roller: 260 mm
bottom roll: 262 mm
side rolls: 212 mm
workspace:
working width: 3,100 mm max
sheet thickness: 14 mm
special features: addition:
1 upper roller 260 mm
1 upper roller 200 mm
condition: ready to use
under current
location: hessen
dimensions:
4.560 x 1,500 x 1,500 mm
7.5 t
availability: immediately
terms of delivery: from site
terms of payment: 100% prior to removal/loading 4 ROLLS BENDING MACHINE (14 X 3,100 MM) SMA-REF-6409 CATEGORY: BENDING MACHINE MANUFACTURER: MG TYPE: MH 3014C. YEAR OF MANUFACTURE: 2007 POWER: 7,5 KW ROLLERS: UPPER ROLLER: 260 MM BOTTOM ROLL: 262 MM SIDE ROLLS: 212 MM WORKSPACE: WORKING WIDTH: 3,100 MM MAX SHEET THICKNESS: 14 MM SPECIAL FEATURES: ADDITION: 1 UPPER ROLLER 260 MM 1 UPPER ROLLER 200 MM CONDITION: READY TO USE UNDER CURRENT LOCATION: HESSEN DIMENSIONS: 4.560 X 1,500 X 1,500 MM 7.5 T AVAILABILITY: IMMEDIATELY TERMS OF DELIVERY: FROM SITE TERMS OF PAYMENT: 100% PRIOR TO REMOVAL/LOADING
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-type automat, 30 pcs.,  32  -  70 g\r\nmanually head turning backwards\r\n TYPE AUTOMAT, 30 PCS., 32 - 70 G\R\NMANUALLY HEAD TURNING BACKWARDS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-5-axis machining center (new spindle)
sma-ref-6408
category: baz universal
manufacturer: deckel maho
type: dmu 50 evo linear
year of construction: 2005
control: heidenhain itnc 530
spindle:
20-18,000 rpm
25/35 kw
ikz
hsk-a 63
workspace:
x: 500 mm
y: 450 mm
w: 500 mm
4 th axle: 360â°
5-axis: 180 degrees
special features: 30 tool stations
new spindle (â?¬17.000,-)
50 h
condition: ready to use
under current
location: north rhine-westphalia
availability: immediately 5-AXIS MACHINING CENTER (NEW SPINDLE) SMA-REF-6408 CATEGORY: BAZ UNIVERSAL MANUFACTURER: DECKEL MAHO TYPE: DMU 50 EVO LINEAR YEAR OF CONSTRUCTION: 2005 CONTROL: HEIDENHAIN ITNC 530 SPINDLE: 20-18,000 RPM 25/35 KW IKZ HSK-A 63 WORKSPACE: X: 500 MM Y: 450 MM W: 500 MM 4 TH AXLE: 360° 5-AXIS: 180 DEGREES SPECIAL FEATURES: 30 TOOL STATIONS NEW SPINDLE (Â?¬17.000,-) 50 H CONDITION: READY TO USE UNDER CURRENT LOCATION: NORTH RHINE-WESTPHALIA AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-cap. variable 600 - 1800 pcs./h\r\ndoughweightrange approx. 200 to 1250 g\r\nfor wheat - and rye bread CAP. VARIABLE 600 - 1800 PCS./H\R\NDOUGHWEIGHTRANGE APPROX. 200 TO 1250 G\R\NFOR WHEAT - AND RYE BREAD
Vendedor: Thünnesen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more IDE types: