1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 57.000 €
Ubicación: Land--four colours straight machine max size 37x52 cms.
-year 2001, only 28 mil. impressions
-komorimatic continuous alcohol dampening with aquapress refrigerated recirculation system with alcohol metering
-komori plate changer: semi-automatic plate changing
-pqc control system- control panel with touch screen built on delivery: ink zones, all registers and dampening remote controls, plate cocking
-rollers and blankets automatic washing devices , double size diameter of impression and transfer cylinders
-all chromed cylinders: plate, blanket and impression , non stop delivery
-powder sprayer, max speed 13.000 sh/hour
-stream feeder with low pile delivery , available immediately -FOUR COLOURS STRAIGHT MACHINE MAX SIZE 37X52 CMS. -YEAR 2001, ONLY 28 MIL. IMPRESSIONS -KOMORIMATIC CONTINUOUS ALCOHOL DAMPENING WITH AQUAPRESS REFRIGERATED RECIRCULATION SYSTEM WITH ALCOHOL METERING -KOMORI PLATE CHANGER: SEMI-AUTOMATIC PLATE CHANGING -PQC CONTROL SYSTEM- CONTROL PANEL WITH TOUCH SCREEN BUILT ON DELIVERY: INK ZONES, ALL REGISTERS AND DAMPENING REMOTE CONTROLS, PLATE COCKING -ROLLERS AND BLANKETS AUTOMATIC WASHING DEVICES , DOUBLE SIZE DIAMETER OF IMPRESSION AND TRANSFER CYLINDERS -ALL CHROMED CYLINDERS: PLATE, BLANKET AND IMPRESSION , NON STOP DELIVERY -POWDER SPRAYER, MAX SPEED 13.000 SH/HOUR -STREAM FEEDER WITH LOW PILE DELIVERY , AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-cnc control, control panel, machining center<br /><br />-constructed from a cnc lathe make: okuma type: lb15<br />-complete unit<br />-dimensions 790/600 / h495 mm<br />-weight 79 kg CNC CONTROL, CONTROL PANEL, MACHINING CENTER

-CONSTRUCTED FROM A CNC LATHE MAKE: OKUMA TYPE: LB15
-COMPLETE UNIT
-DIMENSIONS 790/600 / H495 MM
-WEIGHT 79 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-max. 100 kg dough, 1 speed\r\nprotective device, stationary\r\nbowl  +  doughhook was tinned MAX. 100 KG DOUGH, 1 SPEED\R\NPROTECTIVE DEVICE, STATIONARY\R\NBOWL + DOUGHHOOK WAS TINNED
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-max. size 46 x 64 cm
age 1979
single sheet feeder
conventional dampening
register system bacher 425 mm
dry sprayer
delivery time: 3 - 4 weeks
ref: he190069a

please ask for price.

we ship and install worldwide! MAX. SIZE 46 X 64 CM AGE 1979 SINGLE SHEET FEEDER CONVENTIONAL DAMPENING REGISTER SYSTEM BACHER 425 MM DRY SPRAYER DELIVERY TIME: 3 - 4 WEEKS REF: HE190069A PLEASE ASK FOR PRICE. WE SHIP AND INSTALL WORLDWIDE!
Vendedor: Altmann Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-max. 75 kg flour, 2 speeds, 2 timers\r\nstainless steel bowls + spiral, safety device\r\n MAX. 75 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWLS + SPIRAL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-core d20a, lathe comes from a training workshop (total 3 machines are available of this type) state very well, with
guard / not cleaned off and glass scales and digital display of mitutoyo, central lubrication system, guided tours and refinished, dovetail guides at the flat after scraped, set games.
mechanics tested new, paint, chip wall back, chip tray below, guard with emergency off, tailstock, 3 jaw chuck, little water, chuck key, lighting
tip height 200 mm, centre distance 1000 mm, max.drehdurchmesser 600 mm, over bed 420 mm, over carriage bed width 260 mm, 300 mm,.
sale only to professionals
used, tested - so how you is, can be tested under power and visited
under exclusion of any warranty and guarantee there second-hand machine

free loading on trucks from location, shipment arrangement, placement and set up on request possible
available immediately CORE D20A, LATHE COMES FROM A TRAINING WORKSHOP (TOTAL 3 MACHINES ARE AVAILABLE OF THIS TYPE) STATE VERY WELL, WITH GUARD / NOT CLEANED OFF AND GLASS SCALES AND DIGITAL DISPLAY OF MITUTOYO, CENTRAL LUBRICATION SYSTEM, GUIDED TOURS AND REFINISHED, DOVETAIL GUIDES AT THE FLAT AFTER SCRAPED, SET GAMES. MECHANICS TESTED NEW, PAINT, CHIP WALL BACK, CHIP TRAY BELOW, GUARD WITH EMERGENCY OFF, TAILSTOCK, 3 JAW CHUCK, LITTLE WATER, CHUCK KEY, LIGHTING TIP HEIGHT 200 MM, CENTRE DISTANCE 1000 MM, MAX.DREHDURCHMESSER 600 MM, OVER BED 420 MM, OVER CARRIAGE BED WIDTH 260 MM, 300 MM,. SALE ONLY TO PROFESSIONALS USED, TESTED - SO HOW YOU IS, CAN BE TESTED UNDER POWER AND VISITED UNDER EXCLUSION OF ANY WARRANTY AND GUARANTEE THERE SECOND-HAND MACHINE FREE LOADING ON TRUCKS FROM LOCATION, SHIPMENT ARRANGEMENT, PLACEMENT AND SET UP ON REQUEST POSSIBLE AVAILABLE IMMEDIATELY
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Ubicación: Land-max. 50 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl + spiral, safety device\r\n MAX. 50 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL + SPIRAL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-ideal pgs typ.140-12 hft 50-20
mesh welder
year of manufacture 1995
photoelectric sensor
mounted in enclosed wire cage
safety structure, grid housing
adjustable welding cylinder 12 pieces
welding force 10 kn, with control
welding panel, welding programs
machine fencing area dimensions 7.600 x 5.800 x 2000 mm
weight cca 5 ton
including complete safety fencing area IDEAL PGS TYP.140-12 HFT 50-20 MESH WELDER YEAR OF MANUFACTURE 1995 PHOTOELECTRIC SENSOR MOUNTED IN ENCLOSED WIRE CAGE SAFETY STRUCTURE, GRID HOUSING ADJUSTABLE WELDING CYLINDER 12 PIECES WELDING FORCE 10 KN, WITH CONTROL WELDING PANEL, WELDING PROGRAMS MACHINE FENCING AREA DIMENSIONS 7.600 X 5.800 X 2000 MM WEIGHT CCA 5 TON INCLUDING COMPLETE SAFETY FENCING AREA
Vendedor: Silicon plus
Año de construcción: usado
Ubicación: Land-5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude  \r\ndivider + rounder, type mus - g 5, model 1998\r\n   doughweightrange max. 150 g\r\n    include moulding drum 74 -85 g\r\nintermediate proofer, type zgl5/273/360,\r\n    proofing time approx.10 min.\r\nstamping unit, type fst 5/50\r\nfinal proofer type sg 0,6/1010/950,\r\n    proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm 5 ROWS, CAP. MAX. 8.200 PCS./H, MODEL 1989/1990,\R\NINCLUDE \R\NDIVIDER + ROUNDER, TYPE MUS - G 5, MODEL 1998\R\N DOUGHWEIGHTRANGE MAX. 150 G\R\N INCLUDE MOULDING DRUM 74 -85 G\R\NINTERMEDIATE PROOFER, TYPE ZGL5/273/360,\R\N PROOFING TIME APPROX.10 MIN.\R\NSTAMPING UNIT, TYPE FST 5/50\R\NFINAL PROOFER TYPE SG 0,6/1010/950,\R\N PROOFING TIME APPROX.35 MIN.\R\NAIRCONDITIONING\R\NDEPOSITING DEVICE, WIDTH 600 MM, MAX. LENGTH 800 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
many thanks for your interest in our machinery, please find below our offer:

manufacturer:	mondomix bv niederlande
type:		va 15l
year:		approx. 1998
output:		150 - 450kg/h
volume	2,1 liter
electrical:	4 kw, 380 v, 50 hz, 3 ph
dimensions:	2410 x 650 x 1750 mm
wight:		500kg
different:	continuous aerator

we offer this machine in 'as is' condition, without warranty 

ex warehouse hess. lichtenau, unpacked

 MANY THANKS FOR YOUR INTEREST IN OUR MACHINERY, PLEASE FIND BELOW OUR OFFER: MANUFACTURER: MONDOMIX BV NIEDERLANDE TYPE: VA 15L YEAR: APPROX. 1998 OUTPUT: 150 - 450KG/H VOLUME 2,1 LITER ELECTRICAL: 4 KW, 380 V, 50 HZ, 3 PH DIMENSIONS: 2410 X 650 X 1750 MM WIGHT: 500KG DIFFERENT: CONTINUOUS AERATOR WE OFFER THIS MACHINE IN 'AS IS' CONDITION, WITHOUT WARRANTY EX WAREHOUSE HESS. LICHTENAU, UNPACKED
Vendedor: Peter Heidenreich Maschinenhandel
Año de construcción: usado
Ubicación: Land-stainless steel construction, hopper contains approx. 240 kg dough, hopper inside teflon coated, knife for cutting the dough, feeding control by fotocell \r\ndimension: h 2850 , w 1450 ,  l  2100 mm\r\ndistance between hopper / floor 1950 mm\r\n STAINLESS STEEL CONSTRUCTION, HOPPER CONTAINS APPROX. 240 KG DOUGH, HOPPER INSIDE TEFLON COATED, KNIFE FOR CUTTING THE DOUGH, FEEDING CONTROL BY FOTOCELL \R\NDIMENSION: H 2850 , W 1450 , L 2100 MM\R\NDISTANCE BETWEEN HOPPER / FLOOR 1950 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
  complete kimkay  bread plant

   manufacture of year :2015 COMPLETE KIMKAY BREAD PLANT MANUFACTURE OF YEAR :2015
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-max. 180 kg dough, 2 speeds, 2 timers\r\ninclude 2 moveable bowls stainless steel\r\nsafety device MAX. 180 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NINCLUDE 2 MOVEABLE BOWLS STAINLESS STEEL\R\NSAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
brush sanding machine / edge grinding machine lã?wer topspin k

2002, very good condition
edge finish machine with an air cushion table.
for the edging. ideally suited for the finish - and intermediate lacquer sanding
brush diameter 220 mm, clamping height 160 mm
brush approx. 200 mm, fore aft approximately 200 mm, adjustable in height 45â°-90 â° swivel
roller speed infinitely variable, with frequency converter 150-1400 rpm
air cushion table with side channel blowers for work and prevent scratches.
table length 4100 mm, width 700 mm
chassis with castors
sanding drum can be fitted by the operator. the sanding paper pad are inserted individually. new system with wider bristle support.
grinding motor 0.75 kw
2 x home pressure compressor for the air cushion table per 0.95 kw miscellaneous new and used abrasive material to the insertion of the brush.

transport dimensions 4100 x 900 x 1000 mm, 250 kg

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: in stock our general terms and conditions apply

BRUSH SANDING MACHINE / EDGE GRINDING MACHINE L&ATILDE;?WER TOPSPIN K 2002, VERY GOOD CONDITION EDGE FINISH MACHINE WITH AN AIR CUSHION TABLE. FOR THE EDGING. IDEALLY SUITED FOR THE FINISH - AND INTERMEDIATE LACQUER SANDING BRUSH DIAMETER 220 MM, CLAMPING HEIGHT 160 MM BRUSH APPROX. 200 MM, FORE AFT APPROXIMATELY 200 MM, ADJUSTABLE IN HEIGHT 45&ACIRC;&DEG;-90 &ACIRC;&DEG; SWIVEL ROLLER SPEED INFINITELY VARIABLE, WITH FREQUENCY CONVERTER 150-1400 RPM AIR CUSHION TABLE WITH SIDE CHANNEL BLOWERS FOR WORK AND PREVENT SCRATCHES. TABLE LENGTH 4100 MM, WIDTH 700 MM CHASSIS WITH CASTORS SANDING DRUM CAN BE FITTED BY THE OPERATOR. THE SANDING PAPER PAD ARE INSERTED INDIVIDUALLY. NEW SYSTEM WITH WIDER BRISTLE SUPPORT. GRINDING MOTOR 0.75 KW 2 X HOME PRESSURE COMPRESSOR FOR THE AIR CUSHION TABLE PER 0.95 KW MISCELLANEOUS NEW AND USED ABRASIVE MATERIAL TO THE INSERTION OF THE BRUSH. TRANSPORT DIMENSIONS 4100 X 900 X 1000 MM, 250 KG HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-dimension of wafer sheets 360 x 450 mm\r\n1.  cut 32 mm \r\n2.  cut 30 mm\r\nstacking height approx. 5 - 80 mm\r\n DIMENSION OF WAFER SHEETS 360 X 450 MM\R\N1. CUT 32 MM \R\N2. CUT 30 MM\R\NSTACKING HEIGHT APPROX. 5 - 80 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-profile milling and profile grinding machine brandt - arminius, specifically for stair construction

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

a video of the current machine can be sent on request.

ideal machine for stair builders and solid wood processor
5 units:
1 edge grinding unit with 120 mm band, pneumatic belt tension and electro-pneumatic controlled sanding shoe
2 milling units 1, 5kw to radius milling, swiveling
2 units of profile grinding with belt and electro-pneumatic controlled sanding shoe

secure workpiece clamping chain plates and upper pressure roller
workpiece thickness up to approx. 60 mm
adjustable feed speed
easy pull-out workpiece support
machine is currently equipped with milling cutters r8

operating instructions
ce mark
after painted in places
great machine with outstanding sanding results, hardly rework required. ideal for the efficient production of stairs or table tops.

dimensions approx. 4000 x 1300 x 1900mm (lxwxh). weight approx. 1200kg. 

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". PROFILE MILLING AND PROFILE GRINDING MACHINE BRANDT - ARMINIUS, SPECIFICALLY FOR STAIR CONSTRUCTION THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. IDEAL MACHINE FOR STAIR BUILDERS AND SOLID WOOD PROCESSOR 5 UNITS: 1 EDGE GRINDING UNIT WITH 120 MM BAND, PNEUMATIC BELT TENSION AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE 2 MILLING UNITS 1, 5KW TO RADIUS MILLING, SWIVELING 2 UNITS OF PROFILE GRINDING WITH BELT AND ELECTRO-PNEUMATIC CONTROLLED SANDING SHOE SECURE WORKPIECE CLAMPING CHAIN PLATES AND UPPER PRESSURE ROLLER WORKPIECE THICKNESS UP TO APPROX. 60 MM ADJUSTABLE FEED SPEED EASY PULL-OUT WORKPIECE SUPPORT MACHINE IS CURRENTLY EQUIPPED WITH MILLING CUTTERS R8 OPERATING INSTRUCTIONS CE MARK AFTER PAINTED IN PLACES GREAT MACHINE WITH OUTSTANDING SANDING RESULTS, HARDLY REWORK REQUIRED. IDEAL FOR THE EFFICIENT PRODUCTION OF STAIRS OR TABLE TOPS. DIMENSIONS APPROX. 4000 X 1300 X 1900MM (LXWXH). WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 6.250 €
Ubicación: Land-hebrock edge banding machine - fahrbar-
type euro 2000
year of construction 2005 - top condition!
control panel at eye level
flush cut
flush cut
min. length of workpiece approx. 200 mm
max edge thickness 3/8 mm
gs-marking out training workshop
checked  HEBROCK EDGE BANDING MACHINE - FAHRBAR- TYPE EURO 2000 YEAR OF CONSTRUCTION 2005 - TOP CONDITION! CONTROL PANEL AT EYE LEVEL FLUSH CUT FLUSH CUT MIN. LENGTH OF WORKPIECE APPROX. 200 MM MAX EDGE THICKNESS 3/8 MM GS-MARKING OUT TRAINING WORKSHOP CHECKED
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Ubicación: Land-max. 75 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl, safety  device\r\n MAX. 75 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

total number of impressions / hours:	38,037hrs 
max speed rating (sheets / hr)	5,000 
sheet size / print size (max / min)	1260 x 840mm max, 500 x 350mm min 
platen force generated – tonne	500 tonnes 
substrate types (paper / board / corrugate)	board 
substrate handling devices and type:	
non-stop feeder / delivery:	yes, but no nonstop swords available 
pile height (with / without non-stop) - feeder	
pile height (with / without non-stop) - delivery	
sheet slow-down device	yes 
anti-static system	yes 
honeycomb plates	3 honeycombs, 6 plates 
number of foil spindle sets in machine	3 
foil streams (max number)	6 
foil reel size (diameter min / max )	30mm / 215mm 
foil reel width (width min / max )	50mm min / 1260mm max 
foil waste removal system & type	hunkler baler 
control console	
honeycomb transporter 
3 honeycombs in total 
6 plates 
foil spindle devices 13 
lifting devices	crane 

estimated overall weight (tonne)	22 tons 
length (m)	9 
width (m)	6 
height (m)	2.8 
total power consumption (volt/phase/amps)	440/3/56 (75a switched supply) 
in production 
good condition 
inspection welcome 
full and complete WE ARE PLEASED TO OFFER: TOTAL NUMBER OF IMPRESSIONS / HOURS: 38,037HRS MAX SPEED RATING (SHEETS / HR) 5,000 SHEET SIZE / PRINT SIZE (MAX / MIN) 1260 X 840MM MAX, 500 X 350MM MIN PLATEN FORCE GENERATED – TONNE 500 TONNES SUBSTRATE TYPES (PAPER / BOARD / CORRUGATE) BOARD SUBSTRATE HANDLING DEVICES AND TYPE: NON-STOP FEEDER / DELIVERY: YES, BUT NO NONSTOP SWORDS AVAILABLE PILE HEIGHT (WITH / WITHOUT NON-STOP) - FEEDER PILE HEIGHT (WITH / WITHOUT NON-STOP) - DELIVERY SHEET SLOW-DOWN DEVICE YES ANTI-STATIC SYSTEM YES HONEYCOMB PLATES 3 HONEYCOMBS, 6 PLATES NUMBER OF FOIL SPINDLE SETS IN MACHINE 3 FOIL STREAMS (MAX NUMBER) 6 FOIL REEL SIZE (DIAMETER MIN / MAX ) 30MM / 215MM FOIL REEL WIDTH (WIDTH MIN / MAX ) 50MM MIN / 1260MM MAX FOIL WASTE REMOVAL SYSTEM & TYPE HUNKLER BALER CONTROL CONSOLE HONEYCOMB TRANSPORTER 3 HONEYCOMBS IN TOTAL 6 PLATES FOIL SPINDLE DEVICES 13 LIFTING DEVICES CRANE ESTIMATED OVERALL WEIGHT (TONNE) 22 TONS LENGTH (M) 9 WIDTH (M) 6 HEIGHT (M) 2.8 TOTAL POWER CONSUMPTION (VOLT/PHASE/AMPS) 440/3/56 (75A SWITCHED SUPPLY) IN PRODUCTION GOOD CONDITION INSPECTION WELCOME FULL AND COMPLETE
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-max. 120 kg dough, 2 speeds, 2 timers\r\nstainless steel bowl\r\n MAX. 120 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-technical data
 tip height 110 mm
 centre distance 300 mm
 swing over cross slide 115 mm
 spindle bore 32 mm
 sled:
 longitudinal travel (z axis) 295 mm
 plan travel (x-axis) 220 mm
 turret slide: number 1
 number of positions revolver 8
 sleeve diameter 35 mm
 spindle retainer: camlock
 spindle speeds:
 continuously variable from 30 rpm to 6000 rpm
 tailstock quill recording:
 morse taper 2 mk
 quill stroke 100 mm
 feeds: continuously variable
 length of 0.1 mm / min up to 5000 mm/min
 map of 0.1 mm / min up to 5000 mm/min
 rapid traverse 10 m / min
 kw spindle motor 5.50
 connection 50 hz 3 x 380 volt
 machine weight 1350 kg
 dimensions machine:
 length 1700 mm
 1942 mm wide
 1774 mm

miscellaneous accessories:
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 c axis with interpolation
 chip conveyor
 tool holder set
 driven tool holders
 collet chucks
 bucher TECHNICAL DATA TIP HEIGHT 110 MM CENTRE DISTANCE 300 MM SWING OVER CROSS SLIDE 115 MM SPINDLE BORE 32 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 295 MM PLAN TRAVEL (X-AXIS) 220 MM TURRET SLIDE: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 SLEEVE DIAMETER 35 MM SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE FROM 30 RPM TO 6000 RPM TAILSTOCK QUILL RECORDING: MORSE TAPER 2 MK QUILL STROKE 100 MM FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0.1 MM / MIN UP TO 5000 MM/MIN MAP OF 0.1 MM / MIN UP TO 5000 MM/MIN RAPID TRAVERSE 10 M / MIN KW SPINDLE MOTOR 5.50 CONNECTION 50 HZ 3 X 380 VOLT MACHINE WEIGHT 1350 KG DIMENSIONS MACHINE: LENGTH 1700 MM 1942 MM WIDE 1774 MM MISCELLANEOUS ACCESSORIES: LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 C AXIS WITH INTERPOLATION CHIP CONVEYOR TOOL HOLDER SET DRIVEN TOOL HOLDERS COLLET CHUCKS BUCHER
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-max. 120 kg dough, 2 speeds, 2 timers\r\nspiral + bowl made from stainless steel , \r\nsafety device\r\n MAX. 120 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NSPIRAL + BOWL MADE FROM STAINLESS STEEL , \R\NSAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-it is a used koma monocell freezer room uvr - 15 21 / mono ii (year 2006) for sale. the freezer room is fully functional and is to end march still in operation.
on request, the cell can be removed also.
exterior dimensions: width: 1, 65 m, depth: 2. 40 m, height: 2, 90 m
internal dimensions: width: 1. 50 m, depth: 1, 90 m, height: 2, 00 m
door size: 90 cm x 200 cm

price on request.  IT IS A USED KOMA MONOCELL FREEZER ROOM UVR - 15 21 / MONO II (YEAR 2006) FOR SALE. THE FREEZER ROOM IS FULLY FUNCTIONAL AND IS TO END MARCH STILL IN OPERATION. ON REQUEST, THE CELL CAN BE REMOVED ALSO. EXTERIOR DIMENSIONS: WIDTH: 1, 65 M, DEPTH: 2. 40 M, HEIGHT: 2, 90 M INTERNAL DIMENSIONS: WIDTH: 1. 50 M, DEPTH: 1, 90 M, HEIGHT: 2, 00 M DOOR SIZE: 90 CM X 200 CM PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-max. 125 kg flour, 2 speeds, 2 timers, \r\ninclude 2 moveable bowls stainless steel\r\nsafety device, MAX. 125 KG FLOUR, 2 SPEEDS, 2 TIMERS, \R\NINCLUDE 2 MOVEABLE BOWLS STAINLESS STEEL\R\NSAFETY DEVICE,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMA&ATILDE;?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: &ACIRC;?&NOT;225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: &ACIRC;&MIDDOT; LENGTH OF THE STREETS: CA 51M &ACIRC;&MIDDOT; HEIGHT OF THE SHELVES: CA 9, 3 M &ACIRC;&MIDDOT; SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: &ACIRC;&SECT; NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS &ACIRC;&SECT; DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM &ACIRC;&SECT; SEKTORIERUNG OF THE SHELVES POSSIBLE &ACIRC;&MIDDOT; CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS &ACIRC;&MIDDOT; NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / &ACIRC;&MIDDOT; SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-machine type lathe - cycle controlled make gildemeister nef type plus 500 year 1998
control type cnc forkhart 315 mm three-back chuck
storage location eersel
country of origin germany delivery immediately cargo basis exw technical details
control heidenhain manual plus rotary diameter 500 mm turning diameter over slide 290 mm turning length 1000 mm plan route 250 mm chuck diameter of 260 mm spindle speeds gear-unit stage 1 80-250 1 rpm 
spindle speeds gear-unit stage 2 20-710 1/min. 
spindle speed gear level 3 80-2800 1/min. 
spindle drive 11 kw torque spindle 100% ed 1050 nm max spindle nose according to din 55027 - size 8 spindle bore 70 mm hollow cone of spindle nose metric 80 spindle diameter in the vord. camp 100 mm feed force longitudinal / plan 10 / 5 kn feed 5 m / min rapid traverse - longitudinal/plan 8 / 6 m / min tool holder multifix c tailstock quill diameter 80 mm tailstock hub 180 mm tailstock spindle mount mt 5 weight - machine 3.20 x 1.75 x 1.85 m additional information
grundig heidenhain manual plus control
 MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE GILDEMEISTER NEF TYPE PLUS 500 YEAR 1998 CONTROL TYPE CNC FORKHART 315 MM THREE-BACK CHUCK STORAGE LOCATION EERSEL COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASIS EXW TECHNICAL DETAILS CONTROL HEIDENHAIN MANUAL PLUS ROTARY DIAMETER 500 MM TURNING DIAMETER OVER SLIDE 290 MM TURNING LENGTH 1000 MM PLAN ROUTE 250 MM CHUCK DIAMETER OF 260 MM SPINDLE SPEEDS GEAR-UNIT STAGE 1 80-250 1 RPM SPINDLE SPEEDS GEAR-UNIT STAGE 2 20-710 1/MIN. SPINDLE SPEED GEAR LEVEL 3 80-2800 1/MIN. SPINDLE DRIVE 11 KW TORQUE SPINDLE 100% ED 1050 NM MAX SPINDLE NOSE ACCORDING TO DIN 55027 - SIZE 8 SPINDLE BORE 70 MM HOLLOW CONE OF SPINDLE NOSE METRIC 80 SPINDLE DIAMETER IN THE VORD. CAMP 100 MM FEED FORCE LONGITUDINAL / PLAN 10 / 5 KN FEED 5 M / MIN RAPID TRAVERSE - LONGITUDINAL/PLAN 8 / 6 M / MIN TOOL HOLDER MULTIFIX C TAILSTOCK QUILL DIAMETER 80 MM TAILSTOCK HUB 180 MM TAILSTOCK SPINDLE MOUNT MT 5 WEIGHT - MACHINE 3.20 X 1.75 X 1.85 M ADDITIONAL INFORMATION GRUNDIG HEIDENHAIN MANUAL PLUS CONTROL
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-stainless steel construction, hopper contains approx. 240 kg dough, hopper inside teflon coated, knife for cutting the dough, feeding control by fotocell \r\ndimension: h 2850 , w 1450 ,  l  2100 mm\r\ndistance between hopper / floor 1950 mm\r\n STAINLESS STEEL CONSTRUCTION, HOPPER CONTAINS APPROX. 240 KG DOUGH, HOPPER INSIDE TEFLON COATED, KNIFE FOR CUTTING THE DOUGH, FEEDING CONTROL BY FOTOCELL \R\NDIMENSION: H 2850 , W 1450 , L 2100 MM\R\NDISTANCE BETWEEN HOPPER / FLOOR 1950 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2012 
control unit: unilog b6s 
robot: wittmann w737 

injection unit: .../750
screw diameter: 45 mm 
injection pressure: 2116 bar 
injection volume: 358 ccm 
shot capacity: 325 g 

clamping unit: tm 180/...
clamping force: 180 t 
platen size: 900 x 900 mm 
distance between tie bars: 570 x 520 mm 
mould height: 325 mm 
opening storke: 650 mm 
max.daylight: 975 mm 
ejector stroke: 200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,9 x 1,6x 2,2 m 
weight: 7.300 kg 

equipment:
- 4 x hotrunner controller
- 3 x pneumatic valve
- 1 x core pull
- accumulator MACHINE SPECIFICATION YEAR: 2012 CONTROL UNIT: UNILOG B6S ROBOT: WITTMANN W737 INJECTION UNIT: .../750 SCREW DIAMETER: 45 MM INJECTION PRESSURE: 2116 BAR INJECTION VOLUME: 358 CCM SHOT CAPACITY: 325 G CLAMPING UNIT: TM 180/... CLAMPING FORCE: 180 T PLATEN SIZE: 900 X 900 MM DISTANCE BETWEEN TIE BARS: 570 X 520 MM MOULD HEIGHT: 325 MM OPENING STORKE: 650 MM MAX.DAYLIGHT: 975 MM EJECTOR STROKE: 200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,9 X 1,6X 2,2 M WEIGHT: 7.300 KG EQUIPMENT: - 4 X HOTRUNNER CONTROLLER - 3 X PNEUMATIC VALVE - 1 X CORE PULL - ACCUMULATOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-max. 120 kg dough, 2 speeds, 2 timers,\r\nmoveable bowl, include 2 aluminium - bowls MAX. 120 KG DOUGH, 2 SPEEDS, 2 TIMERS,\R\NMOVEABLE BOWL, INCLUDE 2 ALUMINIUM - BOWLS
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-it is a used koma freezer with refrigeration type h 6 (year 2010) for sale. this is fully functional and is to end march still in operation.
on request, the cell can be removed also.
exterior dimensions: width: 3, 80 m, depth: 1, 10 m, height: 2, 06 m
for plate dimensions: 60cm x 80cm

price on request. IT IS A USED KOMA FREEZER WITH REFRIGERATION TYPE H 6 (YEAR 2010) FOR SALE. THIS IS FULLY FUNCTIONAL AND IS TO END MARCH STILL IN OPERATION. ON REQUEST, THE CELL CAN BE REMOVED ALSO. EXTERIOR DIMENSIONS: WIDTH: 3, 80 M, DEPTH: 1, 10 M, HEIGHT: 2, 06 M FOR PLATE DIMENSIONS: 60CM X 80CM PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-type muc, 4 rows, doughweightrange 28 - 95 g\r\nmoulding drum 50  -  58 g\r\ncap. approx. 4.800 pcs./h,\r\n TYPE MUC, 4 ROWS, DOUGHWEIGHTRANGE 28 - 95 G\R\NMOULDING DRUM 50 - 58 G\R\NCAP. APPROX. 4.800 PCS./H,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-gildemeister ctx 200 s2
 year: 1998
 heidenhain machine is prepared for the bar magazine.

with many tool box ca. 50!
 workspace
-turndiam over coverage 440 mm
-turndiam 210 mm
 x travel 160 mm
 longitudinal travel z 350 mm
 tool carrier
 -universal disc turret - tool station number 12 vdi 30

tailstock
-quill 50mm
-quill stroke 120 mm
quill recording mk3

machine dimensions - chip conveyor lxwxh 3930x1651x1690mm
-weight approx. 3000kg

 GILDEMEISTER CTX 200 S2 YEAR: 1998 HEIDENHAIN MACHINE IS PREPARED FOR THE BAR MAGAZINE. WITH MANY TOOL BOX CA. 50! WORKSPACE -TURNDIAM OVER COVERAGE 440 MM -TURNDIAM 210 MM X TRAVEL 160 MM LONGITUDINAL TRAVEL Z 350 MM TOOL CARRIER -UNIVERSAL DISC TURRET - TOOL STATION NUMBER 12 VDI 30 TAILSTOCK -QUILL 50MM -QUILL STROKE 120 MM QUILL RECORDING MK3 MACHINE DIMENSIONS - CHIP CONVEYOR LXWXH 3930X1651X1690MM -WEIGHT APPROX. 3000KG
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-aluminium frame with design for 9 x 4 = 36 berliner, \r\ndimension: 830 x 470 x 75 mm\r\n6 frames with trolley ALUMINIUM FRAME WITH DESIGN FOR 9 X 4 = 36 BERLINER, \R\NDIMENSION: 830 X 470 X 75 MM\R\N6 FRAMES WITH TROLLEY
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2012 
control unit: unilog b6s 

injection unit: .../750
screw diameter: 45 mm 
injection pressure: 2116 bar 
injection volume: 358 ccm 
shot capacity: 325,7 g 

clamping unit: tm 240/...
clamping force: 240 t 
distance between tie bars: 570 x 570 mm 
mould height: 250...600 mm 
opening storke: 530 mm 
max.daylight: 1130 mm 
ejector stroke: 180 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5, 4 x 1,8 x 2,4 m 
weight: 10.000 kg 

equipment:
- 4 x hotrunner controller
- 3 x pneumatic valve
- 1 x core pull
- accumulator MACHINE SPECIFICATION YEAR: 2012 CONTROL UNIT: UNILOG B6S INJECTION UNIT: .../750 SCREW DIAMETER: 45 MM INJECTION PRESSURE: 2116 BAR INJECTION VOLUME: 358 CCM SHOT CAPACITY: 325,7 G CLAMPING UNIT: TM 240/... CLAMPING FORCE: 240 T DISTANCE BETWEEN TIE BARS: 570 X 570 MM MOULD HEIGHT: 250...600 MM OPENING STORKE: 530 MM MAX.DAYLIGHT: 1130 MM EJECTOR STROKE: 180 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5, 4 X 1,8 X 2,4 M WEIGHT: 10.000 KG EQUIPMENT: - 4 X HOTRUNNER CONTROLLER - 3 X PNEUMATIC VALVE - 1 X CORE PULL - ACCUMULATOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-max. 180 kg dough, 2 speeds, timer\r\ninclude 2 moveable bowls stainless steel\r\nsafety device,\r\n MAX. 180 KG DOUGH, 2 SPEEDS, TIMER\R\NINCLUDE 2 MOVEABLE BOWLS STAINLESS STEEL\R\NSAFETY DEVICE,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-it is a used koma monocell freezer room uvr 21 30 mono ii (year 2002) for sale. the freezer compartment is fully functional and is to end march still in operation.
on request, the cell can be removed also.
exterior dimensions: width: 3, 25 m, depth: 2. 34 m, height: 2. 67 m
internal dimensions: width: 2, 90 m, depth: 2, 10 m, height: 2, 00 m
door size: 90 cm x 200 cm
 
price on request.   IT IS A USED KOMA MONOCELL FREEZER ROOM UVR 21 30 MONO II (YEAR 2002) FOR SALE. THE FREEZER COMPARTMENT IS FULLY FUNCTIONAL AND IS TO END MARCH STILL IN OPERATION. ON REQUEST, THE CELL CAN BE REMOVED ALSO. EXTERIOR DIMENSIONS: WIDTH: 3, 25 M, DEPTH: 2. 34 M, HEIGHT: 2. 67 M INTERNAL DIMENSIONS: WIDTH: 2, 90 M, DEPTH: 2, 10 M, HEIGHT: 2, 00 M DOOR SIZE: 90 CM X 200 CM PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-max. 120 kg dough, 2 speeds, 2 timers\r\nstainless steel bowl, saftey device MAX. 120 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFTEY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-it is a used koma monocell freezer room uvr mono (year 1997) for sale. the freezer compartment is fully functional and is to end march still in operation.
on request, the cell can be removed also.
exterior dimensions: width: 3. 77 m, depth: 2. 40 m, height: 2, 90 m
internal dimensions: width: 3, 25 m, depth: 2, 10 m, height: 2, 00 m
door dimensions: 90 cm x 200 cm

price on request.  IT IS A USED KOMA MONOCELL FREEZER ROOM UVR MONO (YEAR 1997) FOR SALE. THE FREEZER COMPARTMENT IS FULLY FUNCTIONAL AND IS TO END MARCH STILL IN OPERATION. ON REQUEST, THE CELL CAN BE REMOVED ALSO. EXTERIOR DIMENSIONS: WIDTH: 3. 77 M, DEPTH: 2. 40 M, HEIGHT: 2, 90 M INTERNAL DIMENSIONS: WIDTH: 3, 25 M, DEPTH: 2, 10 M, HEIGHT: 2, 00 M DOOR DIMENSIONS: 90 CM X 200 CM PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-max. 80 kg dough, 2 speeds, 2 timers\r\nstainless steel bowl, safety device\r\n MAX. 80 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-it is a used koma fermentation breaker for sale. the fermentation breaker is fully functional and is to end march still in operation.
on request, the cell can be removed also.
exterior dimensions: width: 1, 96 m, depth: 2, 00 m, height: 2. 53 m
internal dimensions: width: 1.70 m, depth: 1, 84 m, height: 2, 00 m
double door dimensions: width: 1, 48 m, height: 2, 00 m

price on request.  IT IS A USED KOMA FERMENTATION BREAKER FOR SALE. THE FERMENTATION BREAKER IS FULLY FUNCTIONAL AND IS TO END MARCH STILL IN OPERATION. ON REQUEST, THE CELL CAN BE REMOVED ALSO. EXTERIOR DIMENSIONS: WIDTH: 1, 96 M, DEPTH: 2, 00 M, HEIGHT: 2. 53 M INTERNAL DIMENSIONS: WIDTH: 1.70 M, DEPTH: 1, 84 M, HEIGHT: 2, 00 M DOUBLE DOOR DIMENSIONS: WIDTH: 1, 48 M, HEIGHT: 2, 00 M PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-double-foil, l-sealer 400 x 500 mm,\r\ntime for temperatur, conveyor + sealing adjustable\r\nelectrical power: 220 v, 1500 watt\r\ntotal size: 1200 mm x 740 x 1000 DOUBLE-FOIL, L-SEALER 400 X 500 MM,\R\NTIME FOR TEMPERATUR, CONVEYOR + SEALING ADJUSTABLE\R\NELECTRICAL POWER: 220 V, 1500 WATT\R\NTOTAL SIZE: 1200 MM X 740 X 1000
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-type	lm 1300
working width of glue rollers (can apply glue on both sides) 1300 mm	
ce mark	
made in denmark in 1995 y.	
transport dimensions	1700x800x1000 mm
weight	 200 kg

 TYPE LM 1300 WORKING WIDTH OF GLUE ROLLERS (CAN APPLY GLUE ON BOTH SIDES) 1300 MM CE MARK MADE IN DENMARK IN 1995 Y. TRANSPORT DIMENSIONS 1700X800X1000 MM WEIGHT 200 KG
Vendedor: MEDIENOS STAKLES, UAB
Año de construcción: usado
Ubicación: Land-cap. 80 - 100 flour\r\ndimensions: 80 x 60 x 145 cm\r\nweight:       75 kg \r\n\r\n CAP. 80 - 100 FLOUR\R\NDIMENSIONS: 80 X 60 X 145 CM\R\NWEIGHT: 75 KG \R\N\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-3000 x 1500 mm with pallet changer, byloader, updated monitor,
cooler, filter, 5 + 7, 5 cutting head, sick light barrier, on time 63973, cutting time 31200, turbo and glass revision at cutting time 22787 hours.
in really good condition, working in production, can be delivered august 2019, service made in march 2019 
 3000 X 1500 MM WITH PALLET CHANGER, BYLOADER, UPDATED MONITOR, COOLER, FILTER, 5 + 7, 5 CUTTING HEAD, SICK LIGHT BARRIER, ON TIME 63973, CUTTING TIME 31200, TURBO AND GLASS REVISION AT CUTTING TIME 22787 HOURS. IN REALLY GOOD CONDITION, WORKING IN PRODUCTION, CAN BE DELIVERED AUGUST 2019, SERVICE MADE IN MARCH 2019
Vendedor: K N Machinery
Año de construcción: usado
Ubicación: Land-moveable, dimensions boxes: 60 x 80 cm, dimensions rack: 62 x 83 x 180 cm\r\n MOVEABLE, DIMENSIONS BOXES: 60 X 80 CM, DIMENSIONS RACK: 62 X 83 X 180 CM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-it is a used cooling room for sale. the refrigerator is fully functional and is to end march still in operation. the evaporator and the cooling unit were replaced 6 months ago.
on request, the cell can be removed also.
exterior dimensions: width: 1.70 m, depth: 2, 00 m, height: 2.10 m
internal dimensions: width: 1. 50 m, depth: 1, 80 m, height: 1. 90 m
door size: 70 cm, height: 190 cm

price on request.  IT IS A USED COOLING ROOM FOR SALE. THE REFRIGERATOR IS FULLY FUNCTIONAL AND IS TO END MARCH STILL IN OPERATION. THE EVAPORATOR AND THE COOLING UNIT WERE REPLACED 6 MONTHS AGO. ON REQUEST, THE CELL CAN BE REMOVED ALSO. EXTERIOR DIMENSIONS: WIDTH: 1.70 M, DEPTH: 2, 00 M, HEIGHT: 2.10 M INTERNAL DIMENSIONS: WIDTH: 1. 50 M, DEPTH: 1, 80 M, HEIGHT: 1. 90 M DOOR SIZE: 70 CM, HEIGHT: 190 CM PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-max. 100 kg flour, approx. 150 kg dough\r\n2 speeds, 2 timers, safety  device\r\n MAX. 100 KG FLOUR, APPROX. 150 KG DOUGH\R\N2 SPEEDS, 2 TIMERS, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more IM types: