1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 7.960 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 20% !!!


universal cylindrical grinding machine mso-cincinnati
with internal grinding attachment

manufacturer: mso-cincinnati
type:  r 57
mach.-nr.: m 25956
year of construction: ??? / 03.2019 tüp.
comm.-nr.: 3990000/009
stock-nr.: 1899

+++ special price: old 9.950,- € | now 7.960,- €
+++ all prices are shown without taxes (net price)


the machine is suitable for:

* external grinding
* internal grinding
* surface grinding
* taper grinding
* chamfering
* angled flat grinding

 
technical data

(according to manufacturer)

centre height: 90 mm
swing-Ø: 180 mm
grinding length: 400 mm

grinding wheel

diameter: 350 mm
bore-Ø: 76 mm
largest width of grinding wheel for plunge grinding: 40 mm
largest total width of a grinding wheel set: 80 mm
largest sum of single widths: 40 mm
grinding wheel speed: 1.650 / 2.150 rpm = 30 m/s

grinding head

largest grinding head hub: 209 mm
largest hub by hand wheel: 67 mm
additional hub: 142 mm
autom. interval feed: 0,005 – 0,020 mm
feed by one revolution of hand wheel: 0,5 mm
feed by one hand wheel graduation mark: 0,005 mm
setting by tip-switch regarding diameter: 0,005 mm

internal grinding attachment

largest distance from front edge spindle headstock to grinding spidnle carrier: 620 mm
bore for carrying the spindle: 60 mm
largest grindable bore: 125 mm / maybe larger

headstock spindle

6 work-piece speeds, adjustable: 80 – 800 rpm
rotatability of headstock spindle against the grinding wheel: 90° / opposite side °45
spindle cone or inner taper of headstock spindle: mk 3

tailstock

inner cone of quill: mk 3
quill travel: 20 mm

table

largest table incline: 14°
largest cone angle: 28°
table speed: 0,0 – 7,0 m/min
rough travel by hand wheel: 1 revolution 20 mm, 1 graduation mark 0,40 mm
fine travel by hand wheel: 1 revolution 2,5 mm, 1 graduation mark 0,05 mm

total connected load: ca. 5 kw
weight: ca. 1.800 kg
standing area: w 1,70 x d 1,50 x h 1,60 m
color: blue / grey-white / red

 
features

* rotatable internal grinding attachment
* manual or automatic operation
* self-feeding up to 0-limit
* grinding wheel fine adjustment
* automatic feed works as piercing feed, without feed, table-dependant feed
* only right / left and right / only left
* upper table for tamper grinding with fine feed and measuring clock
* bedway is lubricated by re-oil
* tailstock can be activated by mechanical lever
* attachment with measuring clock for table pivoting up to 14°
* headstock spindle pivotable up to 90/45°
* grinding head pivotable up to 360°
* grinding head two speeds
* free-standing liquid cooling system, mobile
* splash guards
* grinding wheel flanges with wheels
* internal grinding spindle with cone attachment and extraction threading
* internal cooling through work spindle on work piece during internal grinding
* adjustable straight and radial matching device with quick-fastening lever
* adjustable dressing device for grinding wheel, at tailstock
* adjustable side and diagonal dressing device with scale, for grinding wheel, with quick-release lever
* open lunette, adjustable
* three-chuck-fastening buffer forkhardt Ø 125 mm, with spindle receiver flange (unused)
* fastening clamp device with spindle recevier, fastening clamp set 32 pieces
* grinding thorns for internal grinding in various sizes
* number of retreiving-hearts in various sizes
* number of internal grinding spindles in various sizes
* number of spreading thorns in various sizes


* if the year of construction has a “tüp.”-date, that means the machine has been electrically and technically inspected by us on that date.
* if the year of construction has a “tüb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
* if the year of construction is marked “*”, it is the information the prior owner relayed to us or our own estimation. %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 20% !!! UNIVERSAL CYLINDRICAL GRINDING MACHINE MSO-CINCINNATI WITH INTERNAL GRINDING ATTACHMENT MANUFACTURER: MSO-CINCINNATI TYPE: R 57 MACH.-NR.: M 25956 YEAR OF CONSTRUCTION: ??? / 03.2019 TüP. COMM.-NR.: 3990000/009 STOCK-NR.: 1899 +++ SPECIAL PRICE: OLD 9.950,- € | NOW 7.960,- € +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) THE MACHINE IS SUITABLE FOR: * EXTERNAL GRINDING * INTERNAL GRINDING * SURFACE GRINDING * TAPER GRINDING * CHAMFERING * ANGLED FLAT GRINDING TECHNICAL DATA (ACCORDING TO MANUFACTURER) CENTRE HEIGHT: 90 MM SWING-Ø: 180 MM GRINDING LENGTH: 400 MM GRINDING WHEEL DIAMETER: 350 MM BORE-Ø: 76 MM LARGEST WIDTH OF GRINDING WHEEL FOR PLUNGE GRINDING: 40 MM LARGEST TOTAL WIDTH OF A GRINDING WHEEL SET: 80 MM LARGEST SUM OF SINGLE WIDTHS: 40 MM GRINDING WHEEL SPEED: 1.650 / 2.150 RPM = 30 M/S GRINDING HEAD LARGEST GRINDING HEAD HUB: 209 MM LARGEST HUB BY HAND WHEEL: 67 MM ADDITIONAL HUB: 142 MM AUTOM. INTERVAL FEED: 0,005 – 0,020 MM FEED BY ONE REVOLUTION OF HAND WHEEL: 0,5 MM FEED BY ONE HAND WHEEL GRADUATION MARK: 0,005 MM SETTING BY TIP-SWITCH REGARDING DIAMETER: 0,005 MM INTERNAL GRINDING ATTACHMENT LARGEST DISTANCE FROM FRONT EDGE SPINDLE HEADSTOCK TO GRINDING SPIDNLE CARRIER: 620 MM BORE FOR CARRYING THE SPINDLE: 60 MM LARGEST GRINDABLE BORE: 125 MM / MAYBE LARGER HEADSTOCK SPINDLE 6 WORK-PIECE SPEEDS, ADJUSTABLE: 80 – 800 RPM ROTATABILITY OF HEADSTOCK SPINDLE AGAINST THE GRINDING WHEEL: 90° / OPPOSITE SIDE °45 SPINDLE CONE OR INNER TAPER OF HEADSTOCK SPINDLE: MK 3 TAILSTOCK INNER CONE OF QUILL: MK 3 QUILL TRAVEL: 20 MM TABLE LARGEST TABLE INCLINE: 14° LARGEST CONE ANGLE: 28° TABLE SPEED: 0,0 – 7,0 M/MIN ROUGH TRAVEL BY HAND WHEEL: 1 REVOLUTION 20 MM, 1 GRADUATION MARK 0,40 MM FINE TRAVEL BY HAND WHEEL: 1 REVOLUTION 2,5 MM, 1 GRADUATION MARK 0,05 MM TOTAL CONNECTED LOAD: CA. 5 KW WEIGHT: CA. 1.800 KG STANDING AREA: W 1,70 X D 1,50 X H 1,60 M COLOR: BLUE / GREY-WHITE / RED FEATURES * ROTATABLE INTERNAL GRINDING ATTACHMENT * MANUAL OR AUTOMATIC OPERATION * SELF-FEEDING UP TO 0-LIMIT * GRINDING WHEEL FINE ADJUSTMENT * AUTOMATIC FEED WORKS AS PIERCING FEED, WITHOUT FEED, TABLE-DEPENDANT FEED * ONLY RIGHT / LEFT AND RIGHT / ONLY LEFT * UPPER TABLE FOR TAMPER GRINDING WITH FINE FEED AND MEASURING CLOCK * BEDWAY IS LUBRICATED BY RE-OIL * TAILSTOCK CAN BE ACTIVATED BY MECHANICAL LEVER * ATTACHMENT WITH MEASURING CLOCK FOR TABLE PIVOTING UP TO 14° * HEADSTOCK SPINDLE PIVOTABLE UP TO 90/45° * GRINDING HEAD PIVOTABLE UP TO 360° * GRINDING HEAD TWO SPEEDS * FREE-STANDING LIQUID COOLING SYSTEM, MOBILE * SPLASH GUARDS * GRINDING WHEEL FLANGES WITH WHEELS * INTERNAL GRINDING SPINDLE WITH CONE ATTACHMENT AND EXTRACTION THREADING * INTERNAL COOLING THROUGH WORK SPINDLE ON WORK PIECE DURING INTERNAL GRINDING * ADJUSTABLE STRAIGHT AND RADIAL MATCHING DEVICE WITH QUICK-FASTENING LEVER * ADJUSTABLE DRESSING DEVICE FOR GRINDING WHEEL, AT TAILSTOCK * ADJUSTABLE SIDE AND DIAGONAL DRESSING DEVICE WITH SCALE, FOR GRINDING WHEEL, WITH QUICK-RELEASE LEVER * OPEN LUNETTE, ADJUSTABLE * THREE-CHUCK-FASTENING BUFFER FORKHARDT Ø 125 MM, WITH SPINDLE RECEIVER FLANGE (UNUSED) * FASTENING CLAMP DEVICE WITH SPINDLE RECEVIER, FASTENING CLAMP SET 32 PIECES * GRINDING THORNS FOR INTERNAL GRINDING IN VARIOUS SIZES * NUMBER OF RETREIVING-HEARTS IN VARIOUS SIZES * NUMBER OF INTERNAL GRINDING SPINDLES IN VARIOUS SIZES * NUMBER OF SPREADING THORNS IN VARIOUS SIZES * IF THE YEAR OF CONSTRUCTION HAS A “TüP.”-DATE, THAT MEANS THE MACHINE HAS BEEN ELECTRICALLY AND TECHNICALLY INSPECTED BY US ON THAT DATE. * IF THE YEAR OF CONSTRUCTION HAS A “TüB.”-DATE, THAT MEANS THE MACHINE HAS BEEN PARTIALLY OVERHAULED ON THAT DATE ACCORDING TO THE PRIOR OWNER. * IF THE YEAR OF CONSTRUCTION IS MARKED “*”, IT IS THE INFORMATION THE PRIOR OWNER RELAYED TO US OR OUR OWN ESTIMATION.
Vendedor: ProHa Maschinen
Año de construcción: usado
Precio: 32.700 €
Ubicación: Land-; power [ps]: 105; front tyre size: 480/65-24; rear tyre size: 540/65-38; rear tyres remaining: 80; front tyres remaining: 70; accessories: klimaanlage, luftgefederter sitz, diesel; top speed [km/h]: 40 ; POWER [PS]: 105; FRONT TYRE SIZE: 480/65-24; REAR TYRE SIZE: 540/65-38; REAR TYRES REMAINING: 80; FRONT TYRES REMAINING: 70; ACCESSORIES: KLIMAANLAGE, LUFTGEFEDERTER SITZ, DIESEL; TOP SPEED [KM/H]: 40
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-
gluing machine hall la 1500

used, functional
machine wheels
2 rubber-lined rollers 1500 mm length
rubber flooring in very good condition
clearance height 100 mm
drive approx. 1 kwt
electric cable with plug

transport dimensions: 2000x90xx1600 mm, 350 kg

delivery: from stock offering is aimed only at trader
heavy equipment and machinery and equipment are sold without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale
terms of delivery: from site
the owl maschinenhandel gmbh general terms and conditions apply, see on our homepage  GLUING MACHINE HALL LA 1500 USED, FUNCTIONAL MACHINE WHEELS 2 RUBBER-LINED ROLLERS 1500 MM LENGTH RUBBER FLOORING IN VERY GOOD CONDITION CLEARANCE HEIGHT 100 MM DRIVE APPROX. 1 KWT ELECTRIC CABLE WITH PLUG TRANSPORT DIMENSIONS: 2000X90XX1600 MM, 350 KG DELIVERY: FROM STOCK OFFERING IS AIMED ONLY AT TRADER HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT ARE SOLD WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE TERMS OF DELIVERY: FROM SITE THE OWL MASCHINENHANDEL GMBH GENERAL TERMS AND CONDITIONS APPLY, SEE ON OUR HOMEPAGE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-x way 1020 mm
y way 510 mm
z path 610 mm
control ultimax 4
surface 1020 x 610 mm
toolholder sk 40
tool change unit 24 x
speed 10.000 u / min
drive 15 kw
total power kw
weight approx. 6,5 t the machine
dimensions of the machine 3, 0 x 2, 4 x 2, 6 m
chip conveyor
high pressure coolant
electronic handwheel
internal coolant 20 bar

X WAY 1020 MM Y WAY 510 MM Z PATH 610 MM CONTROL ULTIMAX 4 SURFACE 1020 X 610 MM TOOLHOLDER SK 40 TOOL CHANGE UNIT 24 X SPEED 10.000 U / MIN DRIVE 15 KW TOTAL POWER KW WEIGHT APPROX. 6,5 T THE MACHINE DIMENSIONS OF THE MACHINE 3, 0 X 2, 4 X 2, 6 M CHIP CONVEYOR HIGH PRESSURE COOLANT ELECTRONIC HANDWHEEL INTERNAL COOLANT 20 BAR
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-type muc, 4 rows, doughweightrange 28 - 95 g\r\nmoulding drum 50  -  58 g\r\ncap. approx. 4.800 pcs./h,\r\n TYPE MUC, 4 ROWS, DOUGHWEIGHTRANGE 28 - 95 G\R\NMOULDING DRUM 50 - 58 G\R\NCAP. APPROX. 4.800 PCS./H,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 57.000 €
Ubicación: Land--four colours straight machine max size 37x52 cms.
-year 2001, only 28 mil. impressions
-komorimatic continuous alcohol dampening with aquapress refrigerated recirculation system with alcohol metering
-komori plate changer: semi-automatic plate changing
-pqc control system- control panel with touch screen built on delivery: ink zones, all registers and dampening remote controls, plate cocking
-rollers and blankets automatic washing devices , double size diameter of impression and transfer cylinders
-all chromed cylinders: plate, blanket and impression , non stop delivery
-powder sprayer, max speed 13.000 sh/hour
-stream feeder with low pile delivery , available immediately -FOUR COLOURS STRAIGHT MACHINE MAX SIZE 37X52 CMS. -YEAR 2001, ONLY 28 MIL. IMPRESSIONS -KOMORIMATIC CONTINUOUS ALCOHOL DAMPENING WITH AQUAPRESS REFRIGERATED RECIRCULATION SYSTEM WITH ALCOHOL METERING -KOMORI PLATE CHANGER: SEMI-AUTOMATIC PLATE CHANGING -PQC CONTROL SYSTEM- CONTROL PANEL WITH TOUCH SCREEN BUILT ON DELIVERY: INK ZONES, ALL REGISTERS AND DAMPENING REMOTE CONTROLS, PLATE COCKING -ROLLERS AND BLANKETS AUTOMATIC WASHING DEVICES , DOUBLE SIZE DIAMETER OF IMPRESSION AND TRANSFER CYLINDERS -ALL CHROMED CYLINDERS: PLATE, BLANKET AND IMPRESSION , NON STOP DELIVERY -POWDER SPRAYER, MAX SPEED 13.000 SH/HOUR -STREAM FEEDER WITH LOW PILE DELIVERY , AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-double-foil, l-sealer 400 x 500 mm,\r\ntime for temperatur, conveyor + sealing adjustable\r\nelectrical power: 220 v, 1500 watt\r\ntotal size: 1200 mm x 740 x 1000 DOUBLE-FOIL, L-SEALER 400 X 500 MM,\R\NTIME FOR TEMPERATUR, CONVEYOR + SEALING ADJUSTABLE\R\NELECTRICAL POWER: 220 V, 1500 WATT\R\NTOTAL SIZE: 1200 MM X 740 X 1000
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-include \r\nmultimatic muc, 4 rows, cap. approx. 6.800 pcs./h\r\n  doughweightrange 28 - 84 g\r\n  include 1 moulding drum \r\nmoulder elr 680 w\r\nsetting machine aln-k 630\r\n    max. setting length  1000 mm\r\n INCLUDE \R\NMULTIMATIC MUC, 4 ROWS, CAP. APPROX. 6.800 PCS./H\R\N DOUGHWEIGHTRANGE 28 - 84 G\R\N INCLUDE 1 MOULDING DRUM \R\NMOULDER ELR 680 W\R\NSETTING MACHINE ALN-K 630\R\N MAX. SETTING LENGTH 1000 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
brush sanding machine / edge grinding machine lã?wer topspin k

2002, very good condition
edge finish machine with an air cushion table.
for the edging. ideally suited for the finish - and intermediate lacquer sanding
brush diameter 220 mm, clamping height 160 mm
brush approx. 200 mm, fore aft approximately 200 mm, adjustable in height 45â°-90 â° swivel
roller speed infinitely variable, with frequency converter 150-1400 rpm
air cushion table with side channel blowers for work and prevent scratches.
table length 4100 mm, width 700 mm
chassis with castors
sanding drum can be fitted by the operator. the sanding paper pad are inserted individually. new system with wider bristle support.
grinding motor 0.75 kw
2 x home pressure compressor for the air cushion table per 0.95 kw miscellaneous new and used abrasive material to the insertion of the brush.

transport dimensions 4100 x 900 x 1000 mm, 250 kg

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: in stock our general terms and conditions apply

BRUSH SANDING MACHINE / EDGE GRINDING MACHINE L�WER TOPSPIN K 2002, VERY GOOD CONDITION EDGE FINISH MACHINE WITH AN AIR CUSHION TABLE. FOR THE EDGING. IDEALLY SUITED FOR THE FINISH - AND INTERMEDIATE LACQUER SANDING BRUSH DIAMETER 220 MM, CLAMPING HEIGHT 160 MM BRUSH APPROX. 200 MM, FORE AFT APPROXIMATELY 200 MM, ADJUSTABLE IN HEIGHT 45°-90 ° SWIVEL ROLLER SPEED INFINITELY VARIABLE, WITH FREQUENCY CONVERTER 150-1400 RPM AIR CUSHION TABLE WITH SIDE CHANNEL BLOWERS FOR WORK AND PREVENT SCRATCHES. TABLE LENGTH 4100 MM, WIDTH 700 MM CHASSIS WITH CASTORS SANDING DRUM CAN BE FITTED BY THE OPERATOR. THE SANDING PAPER PAD ARE INSERTED INDIVIDUALLY. NEW SYSTEM WITH WIDER BRISTLE SUPPORT. GRINDING MOTOR 0.75 KW 2 X HOME PRESSURE COMPRESSOR FOR THE AIR CUSHION TABLE PER 0.95 KW MISCELLANEOUS NEW AND USED ABRASIVE MATERIAL TO THE INSERTION OF THE BRUSH. TRANSPORT DIMENSIONS 4100 X 900 X 1000 MM, 250 KG HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: IN STOCK OUR GENERAL TERMS AND CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-2 fans ensure a uniform climate\r\ncapacity sufficient for a proofing-chamber max. 12 m³\r\nsteamer 400 v, 3 kw\r\nheating  400 v, 1,5 kw\r\ntotal electrical power:  4,5 kw / 400 v /\r\nheating temp. + air moisture adjustable 2 FANS ENSURE A UNIFORM CLIMATE\R\NCAPACITY SUFFICIENT FOR A PROOFING-CHAMBER MAX. 12 M³\R\NSTEAMER 400 V, 3 KW\R\NHEATING 400 V, 1,5 KW\R\NTOTAL ELECTRICAL POWER: 4,5 KW / 400 V /\R\NHEATING TEMP. + AIR MOISTURE ADJUSTABLE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 

total number of impressions / hours:	38,037hrs 
max speed rating (sheets / hr)	5,000 
sheet size / print size (max / min)	1260 x 840mm max, 500 x 350mm min 
platen force generated – tonne	500 tonnes 
substrate types (paper / board / corrugate)	board 
substrate handling devices and type:	
non-stop feeder / delivery:	yes, but no nonstop swords available 
pile height (with / without non-stop) - feeder	
pile height (with / without non-stop) - delivery	
sheet slow-down device	yes 
anti-static system	yes 
honeycomb plates	3 honeycombs, 6 plates 
number of foil spindle sets in machine	3 
foil streams (max number)	6 
foil reel size (diameter min / max )	30mm / 215mm 
foil reel width (width min / max )	50mm min / 1260mm max 
foil waste removal system & type	hunkler baler 
control console	
honeycomb transporter 
3 honeycombs in total 
6 plates 
foil spindle devices 13 
lifting devices	crane 

estimated overall weight (tonne)	22 tons 
length (m)	9 
width (m)	6 
height (m)	2.8 
total power consumption (volt/phase/amps)	440/3/56 (75a switched supply) 
in production 
good condition 
inspection welcome 
full and complete WE ARE PLEASED TO OFFER: TOTAL NUMBER OF IMPRESSIONS / HOURS: 38,037HRS MAX SPEED RATING (SHEETS / HR) 5,000 SHEET SIZE / PRINT SIZE (MAX / MIN) 1260 X 840MM MAX, 500 X 350MM MIN PLATEN FORCE GENERATED – TONNE 500 TONNES SUBSTRATE TYPES (PAPER / BOARD / CORRUGATE) BOARD SUBSTRATE HANDLING DEVICES AND TYPE: NON-STOP FEEDER / DELIVERY: YES, BUT NO NONSTOP SWORDS AVAILABLE PILE HEIGHT (WITH / WITHOUT NON-STOP) - FEEDER PILE HEIGHT (WITH / WITHOUT NON-STOP) - DELIVERY SHEET SLOW-DOWN DEVICE YES ANTI-STATIC SYSTEM YES HONEYCOMB PLATES 3 HONEYCOMBS, 6 PLATES NUMBER OF FOIL SPINDLE SETS IN MACHINE 3 FOIL STREAMS (MAX NUMBER) 6 FOIL REEL SIZE (DIAMETER MIN / MAX ) 30MM / 215MM FOIL REEL WIDTH (WIDTH MIN / MAX ) 50MM MIN / 1260MM MAX FOIL WASTE REMOVAL SYSTEM & TYPE HUNKLER BALER CONTROL CONSOLE HONEYCOMB TRANSPORTER 3 HONEYCOMBS IN TOTAL 6 PLATES FOIL SPINDLE DEVICES 13 LIFTING DEVICES CRANE ESTIMATED OVERALL WEIGHT (TONNE) 22 TONS LENGTH (M) 9 WIDTH (M) 6 HEIGHT (M) 2.8 TOTAL POWER CONSUMPTION (VOLT/PHASE/AMPS) 440/3/56 (75A SWITCHED SUPPLY) IN PRODUCTION GOOD CONDITION INSPECTION WELCOME FULL AND COMPLETE
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-volume scaling, cap. max. 50 cycl/min.,(estimation)\r\nvolume scaling between 450 - 1350 ccm, (depends on the product)\r\ndepositing nozzles changeable,\r\ndiameter of the nozzle approx. 24 mm, hopper approx. 60 l\r\nmade from stainless steel, machine moveable\r\n VOLUME SCALING, CAP. MAX. 50 CYCL/MIN.,(ESTIMATION)\R\NVOLUME SCALING BETWEEN 450 - 1350 CCM, (DEPENDS ON THE PRODUCT)\R\NDEPOSITING NOZZLES CHANGEABLE,\R\NDIAMETER OF THE NOZZLE APPROX. 24 MM, HOPPER APPROX. 60 L\R\NMADE FROM STAINLESS STEEL, MACHINE MOVEABLE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMAÃ?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: Â?¬225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: · LENGTH OF THE STREETS: CA 51M · HEIGHT OF THE SHELVES: CA 9, 3 M · SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: § NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS § DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM § SEKTORIERUNG OF THE SHELVES POSSIBLE · CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS · NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / · SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-infeed 6 clock / outfeed 12 clock, cap. max. 5000 pcs./h, \r\ndougweightrange approx.. 400 to 1800 g (estimation)\r\nmoulding length approx. 4100 mm\r\ncone +  tracks are teflonised\r\ninclude oiling system, fan and hot air INFEED 6 CLOCK / OUTFEED 12 CLOCK, CAP. MAX. 5000 PCS./H, \R\NDOUGWEIGHTRANGE APPROX.. 400 TO 1800 G (ESTIMATION)\R\NMOULDING LENGTH APPROX. 4100 MM\R\NCONE + TRACKS ARE TEFLONISED\R\NINCLUDE OILING SYSTEM, FAN AND HOT AIR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-bending length 4100 /3150 mm, 200 ton, stroke 350 mm,.
was 197 mm cybelec dnc 900 225 mm, table control
y1, y2, x 1, x 2, y1, y2, r, automatic adt, hydr clamping, aut. clamping of 5-50 mm of the table, lift sheet in front, acc tool box with tools. to list,
light barrier fgs, 900 nowly overhauled with new sealings and valves in cylinder.
really good condition

l w h 4700 x 2500 x 3080 weight 14500 kg
 BENDING LENGTH 4100 /3150 MM, 200 TON, STROKE 350 MM,. WAS 197 MM CYBELEC DNC 900 225 MM, TABLE CONTROL Y1, Y2, X 1, X 2, Y1, Y2, R, AUTOMATIC ADT, HYDR CLAMPING, AUT. CLAMPING OF 5-50 MM OF THE TABLE, LIFT SHEET IN FRONT, ACC TOOL BOX WITH TOOLS. TO LIST, LIGHT BARRIER FGS, 900 NOWLY OVERHAULED WITH NEW SEALINGS AND VALVES IN CYLINDER. REALLY GOOD CONDITION L W H 4700 X 2500 X 3080 WEIGHT 14500 KG
Vendedor: K N Machinery
Año de construcción: usado
Ubicación: Land-film developing machine g + j ml 400; completely overhauled; infeed width 400 mm; daylight cassette; new circulation pumps; new regeneration pump; new temperature sensor; new heaters.

film processor g + j ml 400; rebuilt; working width 400mm; daylight cassette; new pumps; new temperature sensor; new heaters. FILM DEVELOPING MACHINE G + J ML 400; COMPLETELY OVERHAULED; INFEED WIDTH 400 MM; DAYLIGHT CASSETTE; NEW CIRCULATION PUMPS; NEW REGENERATION PUMP; NEW TEMPERATURE SENSOR; NEW HEATERS. FILM PROCESSOR G + J ML 400; REBUILT; WORKING WIDTH 400MM; DAYLIGHT CASSETTE; NEW PUMPS; NEW TEMPERATURE SENSOR; NEW HEATERS.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Ubicación: Land-moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone,  plastic tracks, \r\ninclude fan + hot air MOVEABLE, CAP. MAX. 2000 PCS./H, \R\NDOUGWEIGHTRANGE APPROX.. 300 TO 1500 G (ESTIMATION)\R\NALU - CONE, PLASTIC TRACKS, \R\NINCLUDE FAN + HOT AIR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-control fanuc o-tc, feeder fmb minimag 3 m.
maximum rotating diameter. 12.7 mm
max speed 12000 rpm.
longitudinal stroke z 1 160 mm
rapid traverse 30 m / min.
maximum thrust force 125 dan
radial stroke x 1 85 mm
weight approx. 2 t
tool holder schlitten1: fixed tool holder 5
accessories: coolant system. CONTROL FANUC O-TC, FEEDER FMB MINIMAG 3 M. MAXIMUM ROTATING DIAMETER. 12.7 MM MAX SPEED 12000 RPM. LONGITUDINAL STROKE Z 1 160 MM RAPID TRAVERSE 30 M / MIN. MAXIMUM THRUST FORCE 125 DAN RADIAL STROKE X 1 85 MM WEIGHT APPROX. 2 T TOOL HOLDER SCHLITTEN1: FIXED TOOL HOLDER 5 ACCESSORIES: COOLANT SYSTEM.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone,  plastic tracks, \r\ninclude fan + hot air MOVEABLE, CAP. MAX. 2000 PCS./H, \R\NDOUGWEIGHTRANGE APPROX.. 300 TO 1500 G (ESTIMATION)\R\NALU - CONE, PLASTIC TRACKS, \R\NINCLUDE FAN + HOT AIR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 11.300 €
Ubicación: Land- we offer for sale:

pallet racks for 960 sites

manufacturer: euro stock

material:

19 uprights, approx. 6,200 x 1,000 mm

69 uprights, approx. 7,000 x 1,000 mm

480 traverses approximately 2,900 x k140 mm

960 pins 176 ground anchor m 12 mm

technical data:

frame elevation 6,200-7.000 mm

shelf depth 1000 mm

load range 933 kg

payload field 8,500 kg

payload specialist 2,800 kg

frame blue

beams blue

in stock: 21698 harsefeld

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983.  WE OFFER FOR SALE: PALLET RACKS FOR 960 SITES MANUFACTURER: EURO STOCK MATERIAL: 19 UPRIGHTS, APPROX. 6,200 X 1,000 MM 69 UPRIGHTS, APPROX. 7,000 X 1,000 MM 480 TRAVERSES APPROXIMATELY 2,900 X K140 MM 960 PINS 176 GROUND ANCHOR M 12 MM TECHNICAL DATA: FRAME ELEVATION 6,200-7.000 MM SHELF DEPTH 1000 MM LOAD RANGE 933 KG PAYLOAD FIELD 8,500 KG PAYLOAD SPECIALIST 2,800 KG FRAME BLUE BEAMS BLUE IN STOCK: 21698 HARSEFELD WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Ubicación: Land-cap. 900 - 1200 pcs./h, 3000 pcs. a 150 g\r\n1000 pcs.  a 1000 g, doughweightrange 50 - 2000 g \r\nmoulding-lenght up to 750 mm (estimation)\r\n CAP. 900 - 1200 PCS./H, 3000 PCS. A 150 G\R\N1000 PCS. A 1000 G, DOUGHWEIGHTRANGE 50 - 2000 G \R\NMOULDING-LENGHT UP TO 750 MM (ESTIMATION)\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-kodak magnus 800 quantum f-speed
year 2007
with autoloader
with plateprocessor
with punch
with rip prinergy evo
price: on request KODAK MAGNUS 800 QUANTUM F-SPEED YEAR 2007 WITH AUTOLOADER WITH PLATEPROCESSOR WITH PUNCH WITH RIP PRINERGY EVO PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-infeed 3 clock / outfeed 12 clock, cap. max. 5000 pcs./h, \r\ndougweightrange approx.. 400 to 1600 g (estimation)\r\nmoulding length approx. 4100 mm\r\ncone +  tracks are teflonised\r\ninclude fan + hot air, moveable\r\n INFEED 3 CLOCK / OUTFEED 12 CLOCK, CAP. MAX. 5000 PCS./H, \R\NDOUGWEIGHTRANGE APPROX.. 400 TO 1600 G (ESTIMATION)\R\NMOULDING LENGTH APPROX. 4100 MM\R\NCONE + TRACKS ARE TEFLONISED\R\NINCLUDE FAN + HOT AIR, MOVEABLE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 1.010 €
Ubicación: Land-we offer for sale:

-file storage - archive shelving shelving rack

dismantling: central warehouse mainz kastel
 

technical details:

plug-in system fa. zippel

year of construction: 2006

condition (as new)

1 double shelf series 2 x 10 m

shelving rack file shelf archive shelf for approximately 1,440 din a4 folder

dimensions:

22 stand, approximately 1,950 x 300 mm

120 shelves, approximately 1,000 x 300 mm (6 floors in the box)

264 floor hooks

4 crosses shelf loads: floor load:

a single series 60 kg (evenly distributed load)

one double row 120 kg (evenly distributed load)
field loads:

single-sided shelves up to 360 kg

double sided shelves up to 720 kg
regalmaã?e:

shelf height approx. 1,950 mm

ground width approx. 1.000 mm

soil depth for a single range approx. 300 mm

soil depth in a double row approx. 600 mm
shelf colors:

shelf stand galvanized / zinc-plated shelves

file racks must be secured exceeding the height-depth ratio of 5:1 against tipping over. 
WE OFFER FOR SALE: -FILE STORAGE - ARCHIVE SHELVING SHELVING RACK DISMANTLING: CENTRAL WAREHOUSE MAINZ KASTEL TECHNICAL DETAILS: PLUG-IN SYSTEM FA. ZIPPEL YEAR OF CONSTRUCTION: 2006 CONDITION (AS NEW) 1 DOUBLE SHELF SERIES 2 X 10 M SHELVING RACK FILE SHELF ARCHIVE SHELF FOR APPROXIMATELY 1,440 DIN A4 FOLDER DIMENSIONS: 22 STAND, APPROXIMATELY 1,950 X 300 MM 120 SHELVES, APPROXIMATELY 1,000 X 300 MM (6 FLOORS IN THE BOX) 264 FLOOR HOOKS 4 CROSSES SHELF LOADS: FLOOR LOAD: A SINGLE SERIES 60 KG (EVENLY DISTRIBUTED LOAD) ONE DOUBLE ROW 120 KG (EVENLY DISTRIBUTED LOAD) FIELD LOADS: SINGLE-SIDED SHELVES UP TO 360 KG DOUBLE SIDED SHELVES UP TO 720 KG REGALMAÃ?E: SHELF HEIGHT APPROX. 1,950 MM GROUND WIDTH APPROX. 1.000 MM SOIL DEPTH FOR A SINGLE RANGE APPROX. 300 MM SOIL DEPTH IN A DOUBLE ROW APPROX. 600 MM SHELF COLORS: SHELF STAND GALVANIZED / ZINC-PLATED SHELVES FILE RACKS MUST BE SECURED EXCEEDING THE HEIGHT-DEPTH RATIO OF 5:1 AGAINST TIPPING OVER.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Ubicación: Land-cap. approx. 20 - 60 strokes/min. (estimation)\r\nworking width max. 600 mm, input by a \r\nchain for plates 600 x 700 mm CAP. APPROX. 20 - 60 STROKES/MIN. (ESTIMATION)\R\NWORKING WIDTH MAX. 600 MM, INPUT BY A \R\NCHAIN FOR PLATES 600 X 700 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-round cutting capacity mm 420
capacity square cut mm 420 x 420
working height 900 mm
development blade mm 6050 x 41 x 1.3
help synchronous blade in the vise
 flywheels diameter 720 mm
clamping width mm 10/420
single roundup advancement 680 mm
cutting speed 12 to 50 m / min or 24 to 100 m / min
machine weight 3600 kg
minimal lubrication system included
year built 2/94 ROUND CUTTING CAPACITY MM 420 CAPACITY SQUARE CUT MM 420 X 420 WORKING HEIGHT 900 MM DEVELOPMENT BLADE MM 6050 X 41 X 1.3 HELP SYNCHRONOUS BLADE IN THE VISE FLYWHEELS DIAMETER 720 MM CLAMPING WIDTH MM 10/420 SINGLE ROUNDUP ADVANCEMENT 680 MM CUTTING SPEED 12 TO 50 M / MIN OR 24 TO 100 M / MIN MACHINE WEIGHT 3600 KG MINIMAL LUBRICATION SYSTEM INCLUDED YEAR BUILT 2/94
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-hurricane painting booth mod. kg-top-320 - rotation / bj. 2014 / 10,600 x 5700 x 3600 / rotary heat exchanger to the air - heating / cnc siemens - simatic / ceiling filter and floor grilles / hitzregister / air - supply 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at

hurricane spray booth model kg-top 320 - rotation / year 2014 / 10,600 x 5,700 x 3,600 / rotary heat exchanger supply for air - heating / / cnc siemens - simatic / ceiling filter and floor grid / heat register / exhaust air - supply air 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at
 HURRICANE PAINTING BOOTH MOD. KG-TOP-320 - ROTATION / BJ. 2014 / 10,600 X 5700 X 3600 / ROTARY HEAT EXCHANGER TO THE AIR - HEATING / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRILLES / HITZREGISTER / AIR - SUPPLY 30,000 M³ H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT HURRICANE SPRAY BOOTH MODEL KG-TOP 320 - ROTATION / YEAR 2014 / 10,600 X 5,700 X 3,600 / ROTARY HEAT EXCHANGER SUPPLY FOR AIR - HEATING / / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRID / HEAT REGISTER / EXHAUST AIR - SUPPLY AIR 30,000 M³ H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-dough weights up to 300 g  ( 11 oz ) estimation\r\nworking width  300 mm\r\nextra long molding device\r\n DOUGH WEIGHTS UP TO 300 G ( 11 OZ ) ESTIMATION\R\NWORKING WIDTH 300 MM\R\NEXTRA LONG MOLDING DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hurricane painting booth mod. kg-top-320 - rotation / bj. 2014 / 10,600 x 5700 x 3600 / rotary heat exchanger to the air - heating / cnc siemens - simatic / ceiling filter and floor grilles / hitzregister / air - supply 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at

hurricane spray booth model kg-top 320 - rotation / year 2014 / 10,600 x 5,700 x 3,600 / rotary heat exchanger supply for air - heating / / cnc siemens - simatic / ceiling filter and floor grid / heat register / exhaust air - supply air 30,000 mâ³ h. / 45 kw / mint condition
fe.gi.maschinen.sbg.at
 HURRICANE PAINTING BOOTH MOD. KG-TOP-320 - ROTATION / BJ. 2014 / 10,600 X 5700 X 3600 / ROTARY HEAT EXCHANGER TO THE AIR - HEATING / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRILLES / HITZREGISTER / AIR - SUPPLY 30,000 M³ H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT HURRICANE SPRAY BOOTH MODEL KG-TOP 320 - ROTATION / YEAR 2014 / 10,600 X 5,700 X 3,600 / ROTARY HEAT EXCHANGER SUPPLY FOR AIR - HEATING / / CNC SIEMENS - SIMATIC / CEILING FILTER AND FLOOR GRID / HEAT REGISTER / EXHAUST AIR - SUPPLY AIR 30,000 M³ H. / 45 KW / MINT CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-infeed 3 clock / outfeed 12 clock, cap. max. 5000 pcs./h, \r\ndougweightrange approx.. 400 to 1600 g (estimation)\r\nmoulding length approx. 4300 mm\r\ncone +  tracks are teflonised\r\ninclude fan + hot air, moveable INFEED 3 CLOCK / OUTFEED 12 CLOCK, CAP. MAX. 5000 PCS./H, \R\NDOUGWEIGHTRANGE APPROX.. 400 TO 1600 G (ESTIMATION)\R\NMOULDING LENGTH APPROX. 4300 MM\R\NCONE + TRACKS ARE TEFLONISED\R\NINCLUDE FAN + HOT AIR, MOVEABLE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 100 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- bimak 
- mod. 40 tf/c
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18. MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - BIMAK - MOD. 40 TF/C MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-with integrated crescent-roll-\r\nmachine with infeed conveyor and centering\r\ntype lwt 3/600  eb 2/200  40 j,\r\nfabr. kasper-universum, stainless steel\r\ncap. max. 2.500 pcs. /h, doughweight  15 to 250 g,\r\n(its an estimation - it depends from the dough, doughweight, worker)  \r\nmoulding machine working width 400 mm\r\nmachine with 2 moulding levels + 2 pressure plates\r\nmoulding belt 600 mm\r\nupper pressure plate   1000 x 585 mm\r\nbelow  pressure plate 1460 x 490 mm\r\nproduct range:  pretzels, beer sticks, salt sticks, baguettes, WITH INTEGRATED CRESCENT-ROLL-\R\NMACHINE WITH INFEED CONVEYOR AND CENTERING\R\NTYPE LWT 3/600 EB 2/200 40 J,\R\NFABR. KASPER-UNIVERSUM, STAINLESS STEEL\R\NCAP. MAX. 2.500 PCS. /H, DOUGHWEIGHT 15 TO 250 G,\R\N(ITS AN ESTIMATION - IT DEPENDS FROM THE DOUGH, DOUGHWEIGHT, WORKER) \R\NMOULDING MACHINE WORKING WIDTH 400 MM\R\NMACHINE WITH 2 MOULDING LEVELS + 2 PRESSURE PLATES\R\NMOULDING BELT 600 MM\R\NUPPER PRESSURE PLATE 1000 X 585 MM\R\NBELOW PRESSURE PLATE 1460 X 490 MM\R\NPRODUCT RANGE: PRETZELS, BEER STICKS, SALT STICKS, BAGUETTES,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe spu20cnc
manufacturer kovosvit, sezimovo ã?stã­
1995 go 2004
control systems sinumeric 810 t (the system was already on the machine, the machine was intended for export), the machine constants are backed up on cd
siemens indramat drives
facilities:
tool head with 12 positions duplomatic
chip conveyor
tailstock (live approximately 40%, not used)
aerosol extractor from the filter crap workspace
chuck 250 mmcnc lathe spu20cnc
manufacturer kovosvit, sezimovo ã?stã­
1995 go 2004
control systems sinumeric 810 t (the system was already on the machine, the machine was intended for export), the machine constants are backed up on cd
siemens indramat drives
facilities:
tool head with 12 positions duplomatic
chip conveyor
tailstock (live approximately 40%, not used)
aerosol extractor from the filter crap workspace
chuck 250 mm CNC LATHE SPU20CNC MANUFACTURER KOVOSVIT, SEZIMOVO �STí 1995 GO 2004 CONTROL SYSTEMS SINUMERIC 810 T (THE SYSTEM WAS ALREADY ON THE MACHINE, THE MACHINE WAS INTENDED FOR EXPORT), THE MACHINE CONSTANTS ARE BACKED UP ON CD SIEMENS INDRAMAT DRIVES FACILITIES: TOOL HEAD WITH 12 POSITIONS DUPLOMATIC CHIP CONVEYOR TAILSTOCK (LIVE APPROXIMATELY 40%, NOT USED) AEROSOL EXTRACTOR FROM THE FILTER CRAP WORKSPACE CHUCK 250 MMCNC LATHE SPU20CNC MANUFACTURER KOVOSVIT, SEZIMOVO �STí 1995 GO 2004 CONTROL SYSTEMS SINUMERIC 810 T (THE SYSTEM WAS ALREADY ON THE MACHINE, THE MACHINE WAS INTENDED FOR EXPORT), THE MACHINE CONSTANTS ARE BACKED UP ON CD SIEMENS INDRAMAT DRIVES FACILITIES: TOOL HEAD WITH 12 POSITIONS DUPLOMATIC CHIP CONVEYOR TAILSTOCK (LIVE APPROXIMATELY 40%, NOT USED) AEROSOL EXTRACTOR FROM THE FILTER CRAP WORKSPACE CHUCK 250 MM
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Precio: 18.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 39.000 €
Ubicación: Land-spindles: 6, spindle arrangement: down - right - left - top - down - uni, working width: 230 mm, height: 120 mm, incl. suction tubes. SPINDLES: 6, SPINDLE ARRANGEMENT: DOWN - RIGHT - LEFT - TOP - DOWN - UNI, WORKING WIDTH: 230 MM, HEIGHT: 120 MM, INCL. SUCTION TUBES.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Precio: 26.700 €
Ubicación: Land-; accessories: leistung (brief):86, bereifung (v):460/70-24, bereifung (h):460/70-24, allrad, kabine, klimaanlage - manuell, schnellwechselrahmen, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):86, BEREIFUNG (V):460/70-24, BEREIFUNG (H):460/70-24, ALLRAD, KABINE, KLIMAANLAGE - MANUELL, SCHNELLWECHSELRAHMEN, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-gildemeister mehrspindeldrehautomat
6- spindler
typ as 48-6

abgreifeinrichtung
rückwertige bearbeitung
spaenefoerderer
iemca pra lademagazin

oelnebelabscheider GILDEMEISTER MEHRSPINDELDREHAUTOMAT 6- SPINDLER TYP AS 48-6 ABGREIFEINRICHTUNG RüCKWERTIGE BEARBEITUNG SPAENEFOERDERER IEMCA PRA LADEMAGAZIN OELNEBELABSCHEIDER
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-; accessories: leistung (brief):88, bereifung (v):460/70r24, bereifung (h):460/70r24, arbeitsscheinwerfer 4x vorn, allrad, kabine, klimaanlage - manuell, schnellwechselrahmen, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3300 ; ACCESSORIES: LEISTUNG (BRIEF):88, BEREIFUNG (V):460/70R24, BEREIFUNG (H):460/70R24, ARBEITSSCHEINWERFER 4X VORN, ALLRAD, KABINE, KLIMAANLAGE - MANUELL, SCHNELLWECHSELRAHMEN, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3300
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-schã¼tte multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
"" (special) to: 100/63 mm

number of independent cross slide: 6
total / working ways middle and upper carriage up: 32/20 mm
lower carriage up: 40/25 mm

spindle diameter: 224 mm
main time min/max: 0.36/150 sec.
productive time min./max.: 0.45/0.80 sec.

spindle speed from / to: 900-5000 u/min
2. area: 355-2000 u/min

nominal power of the motor: 15 kw
power supply: 50 kva
the drive motor speed: 1500 rpm
length * width (standard execution) 3705 * 1320 mm
incl. rod guide (standard execution) 6335 mm

approximate weight without rod guide and accessories: 4.6 to.
the rod guide approximately: 0.5 to.
total without accessories approx. to 5.1.
(all information according to manufacturer)

beiuyg98hw
equipment:
sub unit with rear processing
thread cutter gearbox with electric clutch
gewindescheidspindel
additional longitudinal slide on location: 1, 2 + 4, 5
discharge
hydraulic part tray in pos 6
force and farmer c02 fire equipment (non-operating)

electrical:

siemens s5 control
camshaft gear: mahani seperate control panel / control panel on the operating side and back
waheed clear text display
electrically prepared for bar loader (n)

other:
prepared for decentralized oil mist separator

machine is in our showroom under power! SCHüTTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 250 mm<br/>description: protective screens for spindle moulder axis<br> for further information see photos. WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 250 MM
DESCRIPTION: PROTECTIVE SCREENS FOR SPINDLE MOULDER AXIS
FOR FURTHER INFORMATION SEE PHOTOS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-schuette multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
SCHUETTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 650 kg<br/>dimensions (l x w x h) approx.: 4200 x 1350 x 1600 mm<br/>description: bini 90 long belt sander<br> serial number gi0077<br> working table size 3000 x 1270 mm<br> approximate working height 400 mm<br> automatic lifting / lowering of the table<br> safety belt protector<br> motor power 5,5 hp<br> ce standards WEIGHT APPROX.: 650 KG
DIMENSIONS (L X W X H) APPROX.: 4200 X 1350 X 1600 MM
DESCRIPTION: BINI 90 LONG BELT SANDER
SERIAL NUMBER GI0077
WORKING TABLE SIZE 3000 X 1270 MM
APPROXIMATE WORKING HEIGHT 400 MM
AUTOMATIC LIFTING / LOWERING OF THE TABLE
SAFETY BELT PROTECTOR
MOTOR POWER 5,5 HP
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-glass heating furnace gt1411, year 2008

this furnace is used for heat treating of glass. the electric heaters heat up flat glass to desired temperature and the glass can be coated or treated in the coating section. the glass panel is then held in the annealing section for desired time and temperature. the loading and unloading of glass panels is done manually onto and from the roller tables. the conveyers are bushing rubber rollers to prevent the glass from scratching. the rollers are driven individually by frequency motors.

the furnace body is insulated with aluminum silicate for high efficiency. ceramic quartz rollers with low thermal expansion rate are used in heating, coating and front annealing section, and a stainless steel roller wrapped with ropes is used in lower annealing section. the furnace is equipped with an so2 gas feeding device. the feeding of gas lubricates and protects the lower surface of the glass during the production cycle.

the complete delivery includes loading and unloading tables, furnace, control system and auxiliary facilities.

make: qinhuangdao tucheng glass technology co, china
model: gt1411
year: 2008
capacity: 4.0 – 8.5 m/min clear sheet glass
top temperature: 600 - 630 °c
electricity: 250 kw, 380 v, 3-phase
dimensions: 8.0 x 2.9 x 2.4 m (lxwxh)
weight: 10 tons
temperature controller: omron ej1
control plc: siemens simatic s7-300   GLASS HEATING FURNACE GT1411, YEAR 2008 THIS FURNACE IS USED FOR HEAT TREATING OF GLASS. THE ELECTRIC HEATERS HEAT UP FLAT GLASS TO DESIRED TEMPERATURE AND THE GLASS CAN BE COATED OR TREATED IN THE COATING SECTION. THE GLASS PANEL IS THEN HELD IN THE ANNEALING SECTION FOR DESIRED TIME AND TEMPERATURE. THE LOADING AND UNLOADING OF GLASS PANELS IS DONE MANUALLY ONTO AND FROM THE ROLLER TABLES. THE CONVEYERS ARE BUSHING RUBBER ROLLERS TO PREVENT THE GLASS FROM SCRATCHING. THE ROLLERS ARE DRIVEN INDIVIDUALLY BY FREQUENCY MOTORS. THE FURNACE BODY IS INSULATED WITH ALUMINUM SILICATE FOR HIGH EFFICIENCY. CERAMIC QUARTZ ROLLERS WITH LOW THERMAL EXPANSION RATE ARE USED IN HEATING, COATING AND FRONT ANNEALING SECTION, AND A STAINLESS STEEL ROLLER WRAPPED WITH ROPES IS USED IN LOWER ANNEALING SECTION. THE FURNACE IS EQUIPPED WITH AN SO2 GAS FEEDING DEVICE. THE FEEDING OF GAS LUBRICATES AND PROTECTS THE LOWER SURFACE OF THE GLASS DURING THE PRODUCTION CYCLE. THE COMPLETE DELIVERY INCLUDES LOADING AND UNLOADING TABLES, FURNACE, CONTROL SYSTEM AND AUXILIARY FACILITIES. MAKE: QINHUANGDAO TUCHENG GLASS TECHNOLOGY CO, CHINA MODEL: GT1411 YEAR: 2008 CAPACITY: 4.0 – 8.5 M/MIN CLEAR SHEET GLASS TOP TEMPERATURE: 600 - 630 °C ELECTRICITY: 250 KW, 380 V, 3-PHASE DIMENSIONS: 8.0 X 2.9 X 2.4 M (LXWXH) WEIGHT: 10 TONS TEMPERATURE CONTROLLER: OMRON EJ1 CONTROL PLC: SIEMENS SIMATIC S7-300
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-weight approx.: 1350 kg<br/>dimensions (l x w x h) approx.: 5000 x 1700 x 1500 mm<br/>description: automatic press for doors ramarch<br> serial number 67607<br> minimum working capacity 300 x 200 x 15 mm<br> maximum working capacity 2000 x 650 x 50 mm<br> maximum transversal thrust 1000 kg<br> maximum longitudinal thrust 1000 kg<br> conveying speed: 8-30 m / min<br> adjustable clamping time: 0-999 sec.<br> approximate time for each automatic cycle: 15 sec.<br> total installed power 2 kw<br> working pressure 7 bar<br> ce standards WEIGHT APPROX.: 1350 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 1700 X 1500 MM
DESCRIPTION: AUTOMATIC PRESS FOR DOORS RAMARCH
SERIAL NUMBER 67607
MINIMUM WORKING CAPACITY 300 X 200 X 15 MM
MAXIMUM WORKING CAPACITY 2000 X 650 X 50 MM
MAXIMUM TRANSVERSAL THRUST 1000 KG
MAXIMUM LONGITUDINAL THRUST 1000 KG
CONVEYING SPEED: 8-30 M / MIN
ADJUSTABLE CLAMPING TIME: 0-999 SEC.
APPROXIMATE TIME FOR EACH AUTOMATIC CYCLE: 15 SEC.
TOTAL INSTALLED POWER 2 KW
WORKING PRESSURE 7 BAR
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-automatic sleeving machine krones sleevematic m2, 30.000 bph, year 2008
  
this krones sleevematic is an inline machine for shrink sleeves, built in 2008. it has been running only approximately 600 hours and is excellent condition. last major maintenance has been done prior to the machines stop and regular cleanings, inspections and lubrications are still performed. it works on one way and returnable glass bottles. it is currently installed and connected – power up test can be performed. it is available immediately and due to the very low running hours and regular maintenance it is in excellent condition. the delivery includes a sleeving machine, shrink tunnel, bottle dryer and control cabinets with siemens simatic plc
  
make: krones
type: sleevematic m 2
manufacturing year 2008
capacity: up to 30.000 bph
bottle size used: 355 ml glass
running hours: 600 hrs approx.
shrink tunnel 9 sections
type/serial: k-795-144
electricity: 400 v/ 50 hz or 460 v / 60 hz   AUTOMATIC SLEEVING MACHINE KRONES SLEEVEMATIC M2, 30.000 BPH, YEAR 2008 THIS KRONES SLEEVEMATIC IS AN INLINE MACHINE FOR SHRINK SLEEVES, BUILT IN 2008. IT HAS BEEN RUNNING ONLY APPROXIMATELY 600 HOURS AND IS EXCELLENT CONDITION. LAST MAJOR MAINTENANCE HAS BEEN DONE PRIOR TO THE MACHINES STOP AND REGULAR CLEANINGS, INSPECTIONS AND LUBRICATIONS ARE STILL PERFORMED. IT WORKS ON ONE WAY AND RETURNABLE GLASS BOTTLES. IT IS CURRENTLY INSTALLED AND CONNECTED – POWER UP TEST CAN BE PERFORMED. IT IS AVAILABLE IMMEDIATELY AND DUE TO THE VERY LOW RUNNING HOURS AND REGULAR MAINTENANCE IT IS IN EXCELLENT CONDITION. THE DELIVERY INCLUDES A SLEEVING MACHINE, SHRINK TUNNEL, BOTTLE DRYER AND CONTROL CABINETS WITH SIEMENS SIMATIC PLC MAKE: KRONES TYPE: SLEEVEMATIC M 2 MANUFACTURING YEAR 2008 CAPACITY: UP TO 30.000 BPH BOTTLE SIZE USED: 355 ML GLASS RUNNING HOURS: 600 HRS APPROX. SHRINK TUNNEL 9 SECTIONS TYPE/SERIAL: K-795-144 ELECTRICITY: 400 V/ 50 HZ OR 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 1800 kg<br/>dimensions (l x w x h) approx.: 5400 x 1200 x 1900 mm<br/>description: unilateral edgebander brandt optimat kd 84 c<br> serial number 0-261-03-7784<br> maximum working thickness 50 mm<br> composition:<br> hot melt gluing group with 4 pressing rollers<br> end trimming group (motor power 0.35 kw-11,000 rpm)<br> edge trimming group (motor power 0,55 kw-11,170 rpm)<br> rounding unit group (motor power 0.35 kw-11,000 rpm)<br> scrapping group<br> brushing group (engine power 0,37 kw)<br> speed ??variator<br> ce standards WEIGHT APPROX.: 1800 KG
DIMENSIONS (L X W X H) APPROX.: 5400 X 1200 X 1900 MM
DESCRIPTION: UNILATERAL EDGEBANDER BRANDT OPTIMAT KD 84 C
SERIAL NUMBER 0-261-03-7784
MAXIMUM WORKING THICKNESS 50 MM
COMPOSITION:
HOT MELT GLUING GROUP WITH 4 PRESSING ROLLERS
END TRIMMING GROUP (MOTOR POWER 0.35 KW-11,000 RPM)
EDGE TRIMMING GROUP (MOTOR POWER 0,55 KW-11,170 RPM)
ROUNDING UNIT GROUP (MOTOR POWER 0.35 KW-11,000 RPM)
SCRAPPING GROUP
BRUSHING GROUP (ENGINE POWER 0,37 KW)
SPEED ??VARIATOR
CE STANDARDS
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)