137 ofertas

Año de construcción: usado
Ubicación: Land-year 12/2000 
install in 2001 
max web width: 48” (1219,2 mm) 
impression cylinder circumference: 69” (1752,6 mm) 
product size: 219 x 304,8 mm 
21 million impressions 
equipped : 
2 meg auto-pastes 
two web guide unit with double timson indeed unit. 
2 units blanket to blanket print units 
timpson brush dampening system 
technotrans cooling devices 
1 folder type m3c/4-2d 
stitching system streamliner 2000 
ink agitators 
ink remote control system with console 
grafikontrol system 
plate bender 
stacker gämmerler kl 250 delivery 
from 21 grams to 120 grams paper 
the press is like new  YEAR 12/2000 INSTALL IN 2001 MAX WEB WIDTH: 48” (1219,2 MM) IMPRESSION CYLINDER CIRCUMFERENCE: 69” (1752,6 MM) PRODUCT SIZE: 219 X 304,8 MM 21 MILLION IMPRESSIONS EQUIPPED : 2 MEG AUTO-PASTES TWO WEB GUIDE UNIT WITH DOUBLE TIMSON INDEED UNIT. 2 UNITS BLANKET TO BLANKET PRINT UNITS TIMPSON BRUSH DAMPENING SYSTEM TECHNOTRANS COOLING DEVICES 1 FOLDER TYPE M3C/4-2D STITCHING SYSTEM STREAMLINER 2000 INK AGITATORS INK REMOTE CONTROL SYSTEM WITH CONSOLE GRAFIKONTROL SYSTEM PLATE BENDER STACKER GäMMERLER KL 250 DELIVERY FROM 21 GRAMS TO 120 GRAMS PAPER THE PRESS IS LIKE NEW
Vendedor: ICD
Año de construcción: usado
Ubicación: Land-fixed side at the left<br/>feedspeed 18 - 25 m/min<br/>working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm<br/>panel overhang 30mm<br/>panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations)<br/>coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm<br/>coil diameter 830 mm<br/>equipment:<br/>squaring device with 2 motors each 3 kw<br/>edge heating<br/>edge magazine for 2 coils, guillotine for edges up to 3 mm<br/>glueing part a20 with quickmelt application<br/>lateral pressure zone k, 1 driven and 2 after pressing rollers<br/>end trims hl84, 2 motors each 0,8kw <br/>rough trimming, 2 motors 1,5kw<br/>contour trimming, 2 exchange units<br/>profile scraping pn10<br/>flat scrapers fa11<br/>buffing<br/>automation package straight/chamfer:<br/>-automatic adjustment infeed fence<br/>-automatic setting of pressure rollers<br/>-pneumatic setting of end trims<br/>-pneumatic setting of rough trims<br/>-automatic setting of chamfer/radius on the contour trims<br/>-pneumatic setting of profile and flat scraping  units<br/>-electronic height positioning FIXED SIDE AT THE LEFT
FEEDSPEED 18 - 25 M/MIN
WORKING WIDTH MIN 60MM FOR PANEL THICKNESS 22MM, 105MM FOR PANEL THICKNESS 40MM
PANEL OVERHANG 30MM
PANEL THICKNESS 8 - 60 MM IN STEAD OF 12 - 40 MM (WITH LIMITATIONS)
COIL EDGE THICKNESS: 0,3 - 3 MM, STRIPS 0,4 - 20 MM
COIL DIAMETER 830 MM
EQUIPMENT:
SQUARING DEVICE WITH 2 MOTORS EACH 3 KW
EDGE HEATING
EDGE MAGAZINE FOR 2 COILS, GUILLOTINE FOR EDGES UP TO 3 MM
GLUEING PART A20 WITH QUICKMELT APPLICATION
LATERAL PRESSURE ZONE K, 1 DRIVEN AND 2 AFTER PRESSING ROLLERS
END TRIMS HL84, 2 MOTORS EACH 0,8KW
ROUGH TRIMMING, 2 MOTORS 1,5KW
CONTOUR TRIMMING, 2 EXCHANGE UNITS
PROFILE SCRAPING PN10
FLAT SCRAPERS FA11
BUFFING
AUTOMATION PACKAGE STRAIGHT/CHAMFER:
-AUTOMATIC ADJUSTMENT INFEED FENCE
-AUTOMATIC SETTING OF PRESSURE ROLLERS
-PNEUMATIC SETTING OF END TRIMS
-PNEUMATIC SETTING OF ROUGH TRIMS
-AUTOMATIC SETTING OF CHAMFER/RADIUS ON THE CONTOUR TRIMS
-PNEUMATIC SETTING OF PROFILE AND FLAT SCRAPING UNITS
-ELECTRONIC HEIGHT POSITIONING
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-as new standard eia: â?¬ 2,500 frame: aluminium fork: suntour - nex p hlo, 63mm travel stem: neco alu height, stem mts-c533-5/iso-c handlebar: comfort handlebar magix mhb a6353 25, 4 mm, width 660 mm circuit: shimano deore 10 fold, rapid fire crank: mpf drive brem sen: magura hs-11 tires: schwalbe marathon green guard, puncture protection level 5 rims: ryde rival 19 hubs: shimano hb-m3050 qr sidestand: hebie rear stand e fix 40 ksa 40 26 "-28" saddle: velo gel saddle tour uni, suspension seatpost kalloy lighting: front: axa blue led, hint en: akkuintegriert display: mpf i4u, lcd display, separate control unit e-drive system: mpf drive 5.3 250w battery: mpf slim 500wh castle: axa u-lock (1 key battery lock system) performance: on average, the battery will last for around 80-110 kilometres (according to area) AS NEW STANDARD EIA: &ACIRC;?&NOT; 2,500 FRAME: ALUMINIUM FORK: SUNTOUR - NEX P HLO, 63MM TRAVEL STEM: NECO ALU HEIGHT, STEM MTS-C533-5/ISO-C HANDLEBAR: COMFORT HANDLEBAR MAGIX MHB A6353 25, 4 MM, WIDTH 660 MM CIRCUIT: SHIMANO DEORE 10 FOLD, RAPID FIRE CRANK: MPF DRIVE BREM SEN: MAGURA HS-11 TIRES: SCHWALBE MARATHON GREEN GUARD, PUNCTURE PROTECTION LEVEL 5 RIMS: RYDE RIVAL 19 HUBS: SHIMANO HB-M3050 QR SIDESTAND: HEBIE REAR STAND E FIX 40 KSA 40 26 "-28" SADDLE: VELO GEL SADDLE TOUR UNI, SUSPENSION SEATPOST KALLOY LIGHTING: FRONT: AXA BLUE LED, HINT EN: AKKUINTEGRIERT DISPLAY: MPF I4U, LCD DISPLAY, SEPARATE CONTROL UNIT E-DRIVE SYSTEM: MPF DRIVE 5.3 250W BATTERY: MPF SLIM 500WH CASTLE: AXA U-LOCK (1 KEY BATTERY LOCK SYSTEM) PERFORMANCE: ON AVERAGE, THE BATTERY WILL LAST FOR AROUND 80-110 KILOMETRES (ACCORDING TO AREA)
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-single sided edge bander with hot melt, fixed side at the right, pre-milling unit<br/>edge thickness: 0,4 to 3 mm<br/>workpiece thickness: max 50 mm<br/>min workpiece length 150 mm<br/>feedspeed 22 m/min<br/>workpiece transport by chain, top pressures with rubber rollers<br/>sound enclosure over all trimming motors<br/>equipment:<br/>pre-milling with 2 shapers, motors 1,5kw<br/>glue pot for both eva and pur glue<br/>pressure zone with segmented pressure shoe<br/>end trims k3, motors 0,2kw, 0° and 3° tilting<br/>rough trimming, motors 0,7kw<br/>top/bottom radius trimming, tilting, automatic positioning, motors 0,3kw<br/>postform trimming unit akf, 2-axis cnc controlled, motors 0,35kw<br/>radius scraping unit zk<br/>glue scrapers zk-f<br/>buffing unit<br/>(return conveyor not included) SINGLE SIDED EDGE BANDER WITH HOT MELT, FIXED SIDE AT THE RIGHT, PRE-MILLING UNIT
EDGE THICKNESS: 0,4 TO 3 MM
WORKPIECE THICKNESS: MAX 50 MM
MIN WORKPIECE LENGTH 150 MM
FEEDSPEED 22 M/MIN
WORKPIECE TRANSPORT BY CHAIN, TOP PRESSURES WITH RUBBER ROLLERS
SOUND ENCLOSURE OVER ALL TRIMMING MOTORS
EQUIPMENT:
PRE-MILLING WITH 2 SHAPERS, MOTORS 1,5KW
GLUE POT FOR BOTH EVA AND PUR GLUE
PRESSURE ZONE WITH SEGMENTED PRESSURE SHOE
END TRIMS K3, MOTORS 0,2KW, 0° AND 3° TILTING
ROUGH TRIMMING, MOTORS 0,7KW
TOP/BOTTOM RADIUS TRIMMING, TILTING, AUTOMATIC POSITIONING, MOTORS 0,3KW
POSTFORM TRIMMING UNIT AKF, 2-AXIS CNC CONTROLLED, MOTORS 0,35KW
RADIUS SCRAPING UNIT ZK
GLUE SCRAPERS ZK-F
BUFFING UNIT
(RETURN CONVEYOR NOT INCLUDED)
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-as new standard eia: â?¬ 2,500 frame: aluminium fork: suntour - nex p hlo, 63mm travel stem: neco alu height, stem mts-c533-5/iso-c handlebar: comfort handlebar magix mhb a6353 25, 4 mm, width 660 mm circuit: shimano deore 10 fold, rapid fire crank: mpf drive brem sen: magura hs-11 tires: schwalbe marathon green guard, puncture protection level 5 rims: ryde rival 19 hubs: shimano hb-m3050 qr sidestand: hebie rear stand e fix 40 ksa 40 26 "-28" saddle: velo gel saddle tour uni, suspension seatpost kalloy lighting: front: axa blue led, hint en: akkuintegriert display: mpf i4u, lcd display, separate control unit e-drive system: mpf drive 5.3 250w battery: mpf slim 500wh castle: axa u-lock (1 key battery lock system) performance: on average, the battery will last for around 80-110 kilometres (according to area) AS NEW STANDARD EIA: &ACIRC;?&NOT; 2,500 FRAME: ALUMINIUM FORK: SUNTOUR - NEX P HLO, 63MM TRAVEL STEM: NECO ALU HEIGHT, STEM MTS-C533-5/ISO-C HANDLEBAR: COMFORT HANDLEBAR MAGIX MHB A6353 25, 4 MM, WIDTH 660 MM CIRCUIT: SHIMANO DEORE 10 FOLD, RAPID FIRE CRANK: MPF DRIVE BREM SEN: MAGURA HS-11 TIRES: SCHWALBE MARATHON GREEN GUARD, PUNCTURE PROTECTION LEVEL 5 RIMS: RYDE RIVAL 19 HUBS: SHIMANO HB-M3050 QR SIDESTAND: HEBIE REAR STAND E FIX 40 KSA 40 26 "-28" SADDLE: VELO GEL SADDLE TOUR UNI, SUSPENSION SEATPOST KALLOY LIGHTING: FRONT: AXA BLUE LED, HINT EN: AKKUINTEGRIERT DISPLAY: MPF I4U, LCD DISPLAY, SEPARATE CONTROL UNIT E-DRIVE SYSTEM: MPF DRIVE 5.3 250W BATTERY: MPF SLIM 500WH CASTLE: AXA U-LOCK (1 KEY BATTERY LOCK SYSTEM) PERFORMANCE: ON AVERAGE, THE BATTERY WILL LAST FOR AROUND 80-110 KILOMETRES (ACCORDING TO AREA)
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-panel feed with chain, feed speed 8 and 16 m/min<br/>top pressures with rollers<br/>coil edges 0,3 to 3 mm, strips 0,3 to 13 mm.<br/>edges up to 66 mm height<br/>panel thickness 6 to 60 mm (limited to max. 45 mm for the end trims)<br/>equipment:<br/>1906 glueing unit with hot melt cartridges<br/>1901 edge magazine with guillotine for coil edges<br/>1926 pressure rollers, pneum. loaded, 1 driven, 3 non-driven rollers<br/>1916mf end trims, front and rear, motors 0,45 kw, straight and chamfer<br/>1942 top and bottom frims, motors 0,6 kw, tilting<br/>1942m multi-function top and bottom frims, motors 0,6 kw, tilting<br/>1944 buffing with oscillation<br/>sound enclosure PANEL FEED WITH CHAIN, FEED SPEED 8 AND 16 M/MIN
TOP PRESSURES WITH ROLLERS
COIL EDGES 0,3 TO 3 MM, STRIPS 0,3 TO 13 MM.
EDGES UP TO 66 MM HEIGHT
PANEL THICKNESS 6 TO 60 MM (LIMITED TO MAX. 45 MM FOR THE END TRIMS)
EQUIPMENT:
1906 GLUEING UNIT WITH HOT MELT CARTRIDGES
1901 EDGE MAGAZINE WITH GUILLOTINE FOR COIL EDGES
1926 PRESSURE ROLLERS, PNEUM. LOADED, 1 DRIVEN, 3 NON-DRIVEN ROLLERS
1916MF END TRIMS, FRONT AND REAR, MOTORS 0,45 KW, STRAIGHT AND CHAMFER
1942 TOP AND BOTTOM FRIMS, MOTORS 0,6 KW, TILTING
1942M MULTI-FUNCTION TOP AND BOTTOM FRIMS, MOTORS 0,6 KW, TILTING
1944 BUFFING WITH OSCILLATION
SOUND ENCLOSURE
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-unisex electric bike mint standard rrp: â?¬ 2,500 frame: aluminium fork: suntour - nex p hlo, 63 mm travel stem: neco alu height, stem mts-c533-5/iso-c handlebar: comfort handlebar magix mhb a6353 25, 4 mm, width 660 mm circuit: shimano deore 10 fold, rapid fire crank: mpf drive brake: magura hs-11 tires: schwalbe marathon green guard, puncture protection level 5 rims: ryde rival 19 hubs: shimano hb-m3050 qr sidestand: hebie rear stand e fix 40 ksa 40 26 UNISEX ELECTRIC BIKE MINT STANDARD RRP: &ACIRC;?&NOT; 2,500 FRAME: ALUMINIUM FORK: SUNTOUR - NEX P HLO, 63 MM TRAVEL STEM: NECO ALU HEIGHT, STEM MTS-C533-5/ISO-C HANDLEBAR: COMFORT HANDLEBAR MAGIX MHB A6353 25, 4 MM, WIDTH 660 MM CIRCUIT: SHIMANO DEORE 10 FOLD, RAPID FIRE CRANK: MPF DRIVE BRAKE: MAGURA HS-11 TIRES: SCHWALBE MARATHON GREEN GUARD, PUNCTURE PROTECTION LEVEL 5 RIMS: RYDE RIVAL 19 HUBS: SHIMANO HB-M3050 QR SIDESTAND: HEBIE REAR STAND E FIX 40 KSA 40 26
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-edges: coil edges 0,4 - 3 mm<br/>panel thickness: 6 - 45 mm<br/>equipment:<br/>1902 edge magazine<br/>1906 holt melt unit with cartridges<br/>1902 lateral pressure rollers<br/>1973 mf end trimming, motor 0,3 kw<br/>1942m multi-function top and bottom frims, motors 0,6 kw, tilting EDGES: COIL EDGES 0,4 - 3 MM
PANEL THICKNESS: 6 - 45 MM
EQUIPMENT:
1902 EDGE MAGAZINE
1906 HOLT MELT UNIT WITH CARTRIDGES
1902 LATERAL PRESSURE ROLLERS
1973 MF END TRIMMING, MOTOR 0,3 KW
1942M MULTI-FUNCTION TOP AND BOTTOM FRIMS, MOTORS 0,6 KW, TILTING
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-marangoni tyre curing press
ngt1800
suitable for curing 17.5/r25 to 20.5/r25 otr
fully operational with the crane
stand-alone curing unit
works on steam
year 1980
380 volts
6.2kw
dims: 2.9m wide x 2.54m deep 
weight 12900kgs MARANGONI TYRE CURING PRESS NGT1800 SUITABLE FOR CURING 17.5/R25 TO 20.5/R25 OTR FULLY OPERATIONAL WITH THE CRANE STAND-ALONE CURING UNIT WORKS ON STEAM YEAR 1980 380 VOLTS 6.2KW DIMS: 2.9M WIDE X 2.54M DEEP WEIGHT 12900KGS
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-edges up to 3 mm from coil, 6 mm strips<br/>workpiece width min:<br/>when workpiece thickness 12-22mm 70 mm*<br/>when workpiece thickness23-40 mm, 120 mm*<br/>when workpiece thicknesse 41-60mm 150 mm*<br/>*in relation to workpiece length<br/>feed speed 11 m/min<br/>equipment:<br/>pre-milling 2 x 2,2 kw <br/>pre-heating of panel edge<br/>glue aggregate a6<br/>coil edge magazine<br/>pressure zone, central positioning<br/>end trims, chamfer 15°/straight,  2 x 0,18 kw, 12.000 rpm, electro-pneumatic setting central control<br/>top & bottom trimmng, 2 x 0,27 kw, automatic adjustment when switching from straight to angle<br/>corner rounding unit 1 x 0,35 kw, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece length: 250 mm.<br/>profile scraping unit, quick toolchange, edge thickness: max. 3 mm, electro-pneumatic setting by central control<br/>glue scraping unit<br/>buffing, 2 x 0,09 kw<br/>electronic easy control ec 10+<br/>installed options:<br/>-tooling r= 2 mm<br/>-automatic infeed of the edges kdx1210 (fast exchange of coil edges)<br/>-contour trims 4802 with vertical action doing shelves<br/>-multiple tracing on the top/bottom trims (in case of angled workpieces or drilled workpieces)<br/>-special tracing on the profile scrapers EDGES UP TO 3 MM FROM COIL, 6 MM STRIPS
WORKPIECE WIDTH MIN:
WHEN WORKPIECE THICKNESS 12-22MM 70 MM*
WHEN WORKPIECE THICKNESS23-40 MM, 120 MM*
WHEN WORKPIECE THICKNESSE 41-60MM 150 MM*
*IN RELATION TO WORKPIECE LENGTH
FEED SPEED 11 M/MIN
EQUIPMENT:
PRE-MILLING 2 X 2,2 KW
PRE-HEATING OF PANEL EDGE
GLUE AGGREGATE A6
COIL EDGE MAGAZINE
PRESSURE ZONE, CENTRAL POSITIONING
END TRIMS, CHAMFER 15°/STRAIGHT, 2 X 0,18 KW, 12.000 RPM, ELECTRO-PNEUMATIC SETTING CENTRAL CONTROL
TOP & BOTTOM TRIMMNG, 2 X 0,27 KW, AUTOMATIC ADJUSTMENT WHEN SWITCHING FROM STRAIGHT TO ANGLE
CORNER ROUNDING UNIT 1 X 0,35 KW, 12000 RPM, MAX. 3 MM EDGE THICKNESS, WORKPIECE THISCKNESS: MAX. 40 MM, FEEDSPEED 11 M/MIN., MIN WORKPIECE LENGTH: 250 MM.
PROFILE SCRAPING UNIT, QUICK TOOLCHANGE, EDGE THICKNESS: MAX. 3 MM, ELECTRO-PNEUMATIC SETTING BY CENTRAL CONTROL
GLUE SCRAPING UNIT
BUFFING, 2 X 0,09 KW
ELECTRONIC EASY CONTROL EC 10+
INSTALLED OPTIONS:
-TOOLING R= 2 MM
-AUTOMATIC INFEED OF THE EDGES KDX1210 (FAST EXCHANGE OF COIL EDGES)
-CONTOUR TRIMS 4802 WITH VERTICAL ACTION DOING SHELVES
-MULTIPLE TRACING ON THE TOP/BOTTOM TRIMS (IN CASE OF ANGLED WORKPIECES OR DRILLED WORKPIECES)
-SPECIAL TRACING ON THE PROFILE SCRAPERS
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-scholz steam autoclave
year 1979
7 bar pressure 
internal dims: 1.5m diam. x 2.6mm long 
temperature 150deg c
10 x steam connectors 
indirect steam 
full rail system 
machine overhauled 2016/17
full safety certification available 
complete with control panel  SCHOLZ STEAM AUTOCLAVE YEAR 1979 7 BAR PRESSURE INTERNAL DIMS: 1.5M DIAM. X 2.6MM LONG TEMPERATURE 150DEG C 10 X STEAM CONNECTORS INDIRECT STEAM FULL RAIL SYSTEM MACHINE OVERHAULED 2016/17 FULL SAFETY CERTIFICATION AVAILABLE COMPLETE WITH CONTROL PANEL
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-panel thickness: 12 - 60 mm<br/>feed speed: 18 - 24 m/min<br/>edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood<br/><br/>equipment: <br/>help carriage feeding the panels rectangular<br/>automatic fence at the infeed<br/>squaring device: 2 x 3,0 kw<br/>panel edge pre-heater<br/>hot melt unit: qa34 / a20 <br/>edge magazine <br/>lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers<br/>end trims hl83, programmable change straight/chamfer, 2 motors 0,5 kw<br/>rough trimming: 2 x 1,5 kw<br/>top/bottom fine trimming, tilting, 2 x 0,4 kw<br/>contour trimming fk 13, 2 x 0,4 kw, with 8-fold toolchangers<br/>universal milling motor 4kw <br/>profile scrapers<br/>flat scrapers<br/>buffing unit with oscillation<br/>controlls: homatic nc16 PANEL THICKNESS: 12 - 60 MM
FEED SPEED: 18 - 24 M/MIN
EDGE THICKNESS: 0,4 - 3 MM FOR COIL EDGES, 0,4 - 20 MM FOR STRIPS / SOLID WOOD

EQUIPMENT:
HELP CARRIAGE FEEDING THE PANELS RECTANGULAR
AUTOMATIC FENCE AT THE INFEED
SQUARING DEVICE: 2 X 3,0 KW
PANEL EDGE PRE-HEATER
HOT MELT UNIT: QA34 / A20
EDGE MAGAZINE
LATERAL PRESSURE ROLLERS, THICKNESS PROGRAMMABLE, 1 DRIVEN, 6 NON-DRIVEN ROLLERS
END TRIMS HL83, PROGRAMMABLE CHANGE STRAIGHT/CHAMFER, 2 MOTORS 0,5 KW
ROUGH TRIMMING: 2 X 1,5 KW
TOP/BOTTOM FINE TRIMMING, TILTING, 2 X 0,4 KW
CONTOUR TRIMMING FK 13, 2 X 0,4 KW, WITH 8-FOLD TOOLCHANGERS
UNIVERSAL MILLING MOTOR 4KW
PROFILE SCRAPERS
FLAT SCRAPERS
BUFFING UNIT WITH OSCILLATION
CONTROLLS: HOMATIC NC16
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-scholz steam autoclave 
open steam 
year: 1981
options : electric door and rollers
internal dims: Ø 2540mm / 2600mm deep
direct steam
temperature 170degc 
fully electric door 
no panel 
overall dims: 4000mm high / 3300mm wide /  ± 4000mm long   SCHOLZ STEAM AUTOCLAVE OPEN STEAM YEAR: 1981 OPTIONS : ELECTRIC DOOR AND ROLLERS INTERNAL DIMS: Ø 2540MM / 2600MM DEEP DIRECT STEAM TEMPERATURE 170DEGC FULLY ELECTRIC DOOR NO PANEL OVERALL DIMS: 4000MM HIGH / 3300MM WIDE / ± 4000MM LONG
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-edgebanding line consisting of the following elements:<br/>- infeed table profi tb 10/15/20<br/>- single-sided edgebander profi kr10/16/qa<br/>- return conveyor profi zhr10/s<br/><br/>workpiece dimensions (limited by infeed table):<br/>workpiece thickness: 12-60 mm<br/>length min. 250 mm, max 250 mm<br/>width: min. 220 mm, max 1200 mm <br/><br/>workpiece dimensions for edge bander with manual handling:<br/>length min 250 mm, max 4200 mm<br/>width min 55 mm (long side), max 1200 mm<br/><br/>equipment profi kr10/16/qa<br/>- feeding system si14 for length- and crossfeed of the panels<br/>- formatting on portal left of machine, 4 kw motor, max 1300 mm<br/>- spraying station release agent<br/>- pre-milling 2 x 4,5 kw<br/>- a34 gluing station<br/>- magazine a3 for 6 coils and strips<br/>- pressure zone c with 1-driven and 6 idle rollers<br/>- workpiece preheating<br/>- end trims wk 13, 2 motors each 0,8kw <br/>- rough trimming 2 x 0,55 kw<br/>- contour trimming fk11 automatically chamfer / radius with kombitool<br/>- scraping unit pn20 pneumatic adjustment<br/>- finish unit fa11, consisting of:<br/>  glue scrapers<br/>  sprayer cleaning agent<br/>  buffing<br/>controlls pc21<br/>option to change machine programm between 2 panels EDGEBANDING LINE CONSISTING OF THE FOLLOWING ELEMENTS:
- INFEED TABLE PROFI TB 10/15/20
- SINGLE-SIDED EDGEBANDER PROFI KR10/16/QA
- RETURN CONVEYOR PROFI ZHR10/S

WORKPIECE DIMENSIONS (LIMITED BY INFEED TABLE):
WORKPIECE THICKNESS: 12-60 MM
LENGTH MIN. 250 MM, MAX 250 MM
WIDTH: MIN. 220 MM, MAX 1200 MM

WORKPIECE DIMENSIONS FOR EDGE BANDER WITH MANUAL HANDLING:
LENGTH MIN 250 MM, MAX 4200 MM
WIDTH MIN 55 MM (LONG SIDE), MAX 1200 MM

EQUIPMENT PROFI KR10/16/QA
- FEEDING SYSTEM SI14 FOR LENGTH- AND CROSSFEED OF THE PANELS
- FORMATTING ON PORTAL LEFT OF MACHINE, 4 KW MOTOR, MAX 1300 MM
- SPRAYING STATION RELEASE AGENT
- PRE-MILLING 2 X 4,5 KW
- A34 GLUING STATION
- MAGAZINE A3 FOR 6 COILS AND STRIPS
- PRESSURE ZONE C WITH 1-DRIVEN AND 6 IDLE ROLLERS
- WORKPIECE PREHEATING
- END TRIMS WK 13, 2 MOTORS EACH 0,8KW
- ROUGH TRIMMING 2 X 0,55 KW
- CONTOUR TRIMMING FK11 AUTOMATICALLY CHAMFER / RADIUS WITH KOMBITOOL
- SCRAPING UNIT PN20 PNEUMATIC ADJUSTMENT
- FINISH UNIT FA11, CONSISTING OF:
GLUE SCRAPERS
SPRAYER CLEANING AGENT
BUFFING
CONTROLLS PC21
OPTION TO CHANGE MACHINE PROGRAMM BETWEEN 2 PANELS
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-5-axis cnc - controlled tool and cutter grinder
make walter of tuebingen, type helitronic vision,year of 2013, cnc fanuc 31 ia5

technical data:
working range: longitudinal traverse (x- axis) 480 mm, vertical traverse (y-axis) 320 mm, cross traverse (z-axis) 700 mm, rotary table swivelling range (c-axis) +/- 200°, work head spindle iso 50, max. diameter of workpiece 320 mm, max. length of workpiece for peripheral grinding 370 mm, max. length of workpiece for face grinding 320 mm, max. length of workpiece for peripheral grinding 370 mm; max. dia. wheel 200 mm, peak performance grinding spindle 30 kw, grinding spindle speed 0 - 10.000 rpm. connected load approx. 35 kw (400 volts / 50 hz), weight approx. 7100 kg, dimensions w x d x h = 3649 x 2490 x 22301 mm, colour grey ral 7035 / 7043.

accessories:
eco loader for up to 120 cylindrical tools 3 - 32 mm, 
a axis for cylindrical grinding, speed 0-750 rpm,
toolstudio standard and advanced license,
software toolstudio option drills,
software toolstudio option profile light,
software package 1 (cylindrical mills)
software package 2 (tapered mills)
software package 3 (drills)
software package 16 (warmup program)
software package ims (automatic calibration x, y and z axes to loader),
direct drives in all axes with integrated cooling,
complete hydraulic package with device and hydraulic preparation, 
automatic hydraulic actuated steady rest,
probe for exact positioning of the workpiece,
frequency controlled pump 7-20 bar,
2 grinding wheel mounts.

    5-AXIS CNC - CONTROLLED TOOL AND CUTTER GRINDER MAKE WALTER OF TUEBINGEN, TYPE HELITRONIC VISION,YEAR OF 2013, CNC FANUC 31 IA5 TECHNICAL DATA: WORKING RANGE: LONGITUDINAL TRAVERSE (X- AXIS) 480 MM, VERTICAL TRAVERSE (Y-AXIS) 320 MM, CROSS TRAVERSE (Z-AXIS) 700 MM, ROTARY TABLE SWIVELLING RANGE (C-AXIS) +/- 200°, WORK HEAD SPINDLE ISO 50, MAX. DIAMETER OF WORKPIECE 320 MM, MAX. LENGTH OF WORKPIECE FOR PERIPHERAL GRINDING 370 MM, MAX. LENGTH OF WORKPIECE FOR FACE GRINDING 320 MM, MAX. LENGTH OF WORKPIECE FOR PERIPHERAL GRINDING 370 MM; MAX. DIA. WHEEL 200 MM, PEAK PERFORMANCE GRINDING SPINDLE 30 KW, GRINDING SPINDLE SPEED 0 - 10.000 RPM. CONNECTED LOAD APPROX. 35 KW (400 VOLTS / 50 HZ), WEIGHT APPROX. 7100 KG, DIMENSIONS W X D X H = 3649 X 2490 X 22301 MM, COLOUR GREY RAL 7035 / 7043. ACCESSORIES: ECO LOADER FOR UP TO 120 CYLINDRICAL TOOLS 3 - 32 MM, A AXIS FOR CYLINDRICAL GRINDING, SPEED 0-750 RPM, TOOLSTUDIO STANDARD AND ADVANCED LICENSE, SOFTWARE TOOLSTUDIO OPTION DRILLS, SOFTWARE TOOLSTUDIO OPTION PROFILE LIGHT, SOFTWARE PACKAGE 1 (CYLINDRICAL MILLS) SOFTWARE PACKAGE 2 (TAPERED MILLS) SOFTWARE PACKAGE 3 (DRILLS) SOFTWARE PACKAGE 16 (WARMUP PROGRAM) SOFTWARE PACKAGE IMS (AUTOMATIC CALIBRATION X, Y AND Z AXES TO LOADER), DIRECT DRIVES IN ALL AXES WITH INTEGRATED COOLING, COMPLETE HYDRAULIC PACKAGE WITH DEVICE AND HYDRAULIC PREPARATION, AUTOMATIC HYDRAULIC ACTUATED STEADY REST, PROBE FOR EXACT POSITIONING OF THE WORKPIECE, FREQUENCY CONTROLLED PUMP 7-20 BAR, 2 GRINDING WHEEL MOUNTS.
Vendedor: SuS Schleiftechnik und Maschinenhandel GmbH
Año de construcción: usado
Precio: 54.500 €
Ubicación: Land-einseitige kantenanleimmaschine\r\nfabrikat: biesse\r\ntyp: stream b1/8.5\r\nbaujahr: 2007\r\n\r\nmit werkstückrückführung\r\n\r\nstandard ausrüstung grundmaschine\r\n- riemenoberdruck mit doppel- v -profil\r\n- elektronische höheneinstellung des oberdrucks\r\n- inverter für die vorschubkettengeschwindigkeit\r\n- eigener inverter für jedes aggregat\r\n- pc benutzeroberfläche windows xp\r\n- statistik-software mit exportmöglichkeit in excel\r\n- unbegrenzte log-dateien \r\n- absaugvorrichtung eingebaut im maschinenbett\r\n\r\nwerkstückauflage\r\nin der breite verstellbare hilfsauflage bestehend aus einem aluminiumprofil mit nicht angetriebenen rollen.\r\n\r\nnc-steuerung\r\n\r\neigenschaften\r\n- betriebssystem windows xp professionell\r\n- sintra maschinensteuerung mit windows xp oberfläche\r\n- positionierung der achsen (maschine rüsten)\r\n- elektronische verstellung der vorschubgeschwindigkeit\r\n- elektronische verstellung des oberdrucks\r\n\r\nfügefräsaggregat\r\nfräsaggregat bestehend aus 2 gegenläufigen fräser mit vertikaler achse.\r\n- drehzahl werkzeug min. 9.000 u/min\r\n- motorleistung min. 3,5 + 3,5 kw\r\n- welle (d. x länge) min. 30 x 50 mm\r\nnc-gesteuerter tastschuh am ersten motor um die stärke des abtrages automatisch verstellen zu können\r\n\r\ninfrarotheizlampe\r\n2 infrarotheizlampen, eine oben eine unten zur vorwärmung der werkstückkante die angeleimt wird.\r\n\r\nleimauftragsstation\r\nanleimstation für gerade kanten aus melaminharz, abs, pvc, pp, furnier\r\nmit thermoplastischen eva- klebstoffen\r\n- patentiertes high- melt system, leimwalze und leimschale getrennt\r\n- schnellwechselsystem der leimschale durch einfaches heraus-schwenken aus dem aggregat\r\n- leimwalze und schale komplett teflonbeschichtet\r\n- leimmengendosierung einfach einstellbar\r\n- elektronische synchronlauf der leimwalze mit plattenvorschub\r\n- granulatbehälter mit schleuse direkt an der aufschmelzeinheit\r\n- kantenüberwachung mittels fotozelle\r\n- automatische kantenwechsel nc-gesteuert\r\ndruckzone:\r\n- 1 angetriebene rolle d= 150 mm\r\n- 3 freilaufende rollen d= 65 mm\r\n\r\ntechnische daten:\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n- kantenquerschnitt kappschere min. 135\r\n- werkstückstärke min. 10 mm max. 60 mm\r\n- kantenhöhe min. 15 mm max. 65 mm\r\n- minimale kantenlänge min. 150 mm\r\n\r\nnc y-achse für druckzone\r\ndie verstellung der druckzone erfolgt motorisiert und wird über die steuerung eingestellt.\r\n\r\nz-achse für kantenzuführung\r\nautomatische höhenverstellung der kantenzuführung, in position zur angetriebenen andruckrolle.\r\n\r\nzwölffach kantenmagazin\r\nkantenmagazin für 12 rollenkanten\r\ndie kantenrollen werden vertikal in das magazin hineingestellt und über eine fotozelle wird das ende der rolle überwacht.\r\ndie auswahl der kante erfolgt von der steuerung und bei hinterlegung des gleichen kantentype wird automatisch beim ende der rolle auf die andere gewechselt.\r\n\r\nkappaggregat it90-s\r\nkappagggregat, komplett mit 2 motoren für anleimstärken bis 3 mm.\r\nneigung der motoren an der vertikalachse von 0° auf 25° mit automatischer schwenkung.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 rqm\r\n- motorleistung min. 0,3 + 0,3 kw\r\n- vorschubgeschwindigkeit min. 28 mt/min\r\n- kantendicke min. 0,3 mm max. 3 mm\r\n- werkstückdicke min. 10 mm max. 60 mm\r\n\r\ntastschuh mit 3 positionen für kappaggregat it90\r\n3 unabhängig voneinander einstellbare anschläge pro sägewagen zum verstellen des y-tastschuhes.\r\ndie auswahl des anschlages erfolgt elektropneumatisch und wird vom pc aus gesteuert.\r\n\r\nvorfräsaggregat rs10\r\ndas aggregat ist mit zwei übereinander angeordneten motoren ausgestattet.\r\nbeide motoren sind mit vertikalen tastrollen ausgestattet.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorlesitung 1,3 + 1,3 kw\r\n\r\nfeinfräsaggregat rf40 - fase 25°\r\njeder motor ist komplett mit horizontalem und vertikalem taster und auf schlitten schwenkbar.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,65 + 0,65 kw\r\n\r\nmultifunktionsfräsaggregat ar30\r\nfür feinfräsen und eckenkopieren an werkstücken mit (abs/pvc/pp) kanten bis 3 mm stärke.\r\neckenkopieren ist an geraden sowie an profilierten kanten als auch an soft- und postformingplatten 90° und 180° werkstücke.\r\nfeinfräsen in hoher qualität\r\n\r\nautomatisches umrüsten von dünn- auf dickkante\r\nes ist möglich das aggregat vom bedienpult aus automatisch von dünnkante (0,4 mm) auf dickkante (3,0 mm) umzustellen.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,35 + 0,35 kw\r\n- vorschubgeschwindigkeit max. 18 m/min.\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n\r\n4 pneumatische festpunkte für seitentaster ar30\r\nnc gesteuerte festpunkte zum verstellen des seitentasters zum bearbeiten von 3 dünnkanten und 2 dickkanten\r\n\r\nautomatisches werkzeugwechselmagazin \r\nautomatischen werkzeugwechsel mit einem 5-fach magazin\r\n\r\nprofilziehklingenaggregat rb40\r\nzur nachbearbeitung für abs/pvc/pp kanten.\r\nenthält eine obere und eine untere einheit mit vertikalen und horizontalen kopierscheiben.\r\nautomatis EINSEITIGE KANTENANLEIMMASCHINE\R\NFABRIKAT: BIESSE\R\NTYP: STREAM B1/8.5\R\NBAUJAHR: 2007\R\N\R\NMIT WERKSTüCKRüCKFüHRUNG\R\N\R\NSTANDARD AUSRüSTUNG GRUNDMASCHINE\R\N- RIEMENOBERDRUCK MIT DOPPEL- V -PROFIL\R\N- ELEKTRONISCHE HöHENEINSTELLUNG DES OBERDRUCKS\R\N- INVERTER FüR DIE VORSCHUBKETTENGESCHWINDIGKEIT\R\N- EIGENER INVERTER FüR JEDES AGGREGAT\R\N- PC BENUTZEROBERFLäCHE WINDOWS XP\R\N- STATISTIK-SOFTWARE MIT EXPORTMöGLICHKEIT IN EXCEL\R\N- UNBEGRENZTE LOG-DATEIEN \R\N- ABSAUGVORRICHTUNG EINGEBAUT IM MASCHINENBETT\R\N\R\NWERKSTüCKAUFLAGE\R\NIN DER BREITE VERSTELLBARE HILFSAUFLAGE BESTEHEND AUS EINEM ALUMINIUMPROFIL MIT NICHT ANGETRIEBENEN ROLLEN.\R\N\R\NNC-STEUERUNG\R\N\R\NEIGENSCHAFTEN\R\N- BETRIEBSSYSTEM WINDOWS XP PROFESSIONELL\R\N- SINTRA MASCHINENSTEUERUNG MIT WINDOWS XP OBERFLäCHE\R\N- POSITIONIERUNG DER ACHSEN (MASCHINE RüSTEN)\R\N- ELEKTRONISCHE VERSTELLUNG DER VORSCHUBGESCHWINDIGKEIT\R\N- ELEKTRONISCHE VERSTELLUNG DES OBERDRUCKS\R\N\R\NFüGEFRäSAGGREGAT\R\NFRäSAGGREGAT BESTEHEND AUS 2 GEGENLäUFIGEN FRäSER MIT VERTIKALER ACHSE.\R\N- DREHZAHL WERKZEUG MIN. 9.000 U/MIN\R\N- MOTORLEISTUNG MIN. 3,5 + 3,5 KW\R\N- WELLE (D. X LäNGE) MIN. 30 X 50 MM\R\NNC-GESTEUERTER TASTSCHUH AM ERSTEN MOTOR UM DIE STäRKE DES ABTRAGES AUTOMATISCH VERSTELLEN ZU KöNNEN\R\N\R\NINFRAROTHEIZLAMPE\R\N2 INFRAROTHEIZLAMPEN, EINE OBEN EINE UNTEN ZUR VORWäRMUNG DER WERKSTüCKKANTE DIE ANGELEIMT WIRD.\R\N\R\NLEIMAUFTRAGSSTATION\R\NANLEIMSTATION FüR GERADE KANTEN AUS MELAMINHARZ, ABS, PVC, PP, FURNIER\R\NMIT THERMOPLASTISCHEN EVA- KLEBSTOFFEN\R\N- PATENTIERTES HIGH- MELT SYSTEM, LEIMWALZE UND LEIMSCHALE GETRENNT\R\N- SCHNELLWECHSELSYSTEM DER LEIMSCHALE DURCH EINFACHES HERAUS-SCHWENKEN AUS DEM AGGREGAT\R\N- LEIMWALZE UND SCHALE KOMPLETT TEFLONBESCHICHTET\R\N- LEIMMENGENDOSIERUNG EINFACH EINSTELLBAR\R\N- ELEKTRONISCHE SYNCHRONLAUF DER LEIMWALZE MIT PLATTENVORSCHUB\R\N- GRANULATBEHäLTER MIT SCHLEUSE DIREKT AN DER AUFSCHMELZEINHEIT\R\N- KANTENüBERWACHUNG MITTELS FOTOZELLE\R\N- AUTOMATISCHE KANTENWECHSEL NC-GESTEUERT\R\NDRUCKZONE:\R\N- 1 ANGETRIEBENE ROLLE D= 150 MM\R\N- 3 FREILAUFENDE ROLLEN D= 65 MM\R\N\R\NTECHNISCHE DATEN:\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N- KANTENQUERSCHNITT KAPPSCHERE MIN. 135\R\N- WERKSTüCKSTäRKE MIN. 10 MM MAX. 60 MM\R\N- KANTENHöHE MIN. 15 MM MAX. 65 MM\R\N- MINIMALE KANTENLäNGE MIN. 150 MM\R\N\R\NNC Y-ACHSE FüR DRUCKZONE\R\NDIE VERSTELLUNG DER DRUCKZONE ERFOLGT MOTORISIERT UND WIRD üBER DIE STEUERUNG EINGESTELLT.\R\N\R\NZ-ACHSE FüR KANTENZUFüHRUNG\R\NAUTOMATISCHE HöHENVERSTELLUNG DER KANTENZUFüHRUNG, IN POSITION ZUR ANGETRIEBENEN ANDRUCKROLLE.\R\N\R\NZWöLFFACH KANTENMAGAZIN\R\NKANTENMAGAZIN FüR 12 ROLLENKANTEN\R\NDIE KANTENROLLEN WERDEN VERTIKAL IN DAS MAGAZIN HINEINGESTELLT UND üBER EINE FOTOZELLE WIRD DAS ENDE DER ROLLE üBERWACHT.\R\NDIE AUSWAHL DER KANTE ERFOLGT VON DER STEUERUNG UND BEI HINTERLEGUNG DES GLEICHEN KANTENTYPE WIRD AUTOMATISCH BEIM ENDE DER ROLLE AUF DIE ANDERE GEWECHSELT.\R\N\R\NKAPPAGGREGAT IT90-S\R\NKAPPAGGGREGAT, KOMPLETT MIT 2 MOTOREN FüR ANLEIMSTäRKEN BIS 3 MM.\R\NNEIGUNG DER MOTOREN AN DER VERTIKALACHSE VON 0° AUF 25° MIT AUTOMATISCHER SCHWENKUNG.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 RQM\R\N- MOTORLEISTUNG MIN. 0,3 + 0,3 KW\R\N- VORSCHUBGESCHWINDIGKEIT MIN. 28 MT/MIN\R\N- KANTENDICKE MIN. 0,3 MM MAX. 3 MM\R\N- WERKSTüCKDICKE MIN. 10 MM MAX. 60 MM\R\N\R\NTASTSCHUH MIT 3 POSITIONEN FüR KAPPAGGREGAT IT90\R\N3 UNABHäNGIG VONEINANDER EINSTELLBARE ANSCHLäGE PRO SäGEWAGEN ZUM VERSTELLEN DES Y-TASTSCHUHES.\R\NDIE AUSWAHL DES ANSCHLAGES ERFOLGT ELEKTROPNEUMATISCH UND WIRD VOM PC AUS GESTEUERT.\R\N\R\NVORFRäSAGGREGAT RS10\R\NDAS AGGREGAT IST MIT ZWEI üBEREINANDER ANGEORDNETEN MOTOREN AUSGESTATTET.\R\NBEIDE MOTOREN SIND MIT VERTIKALEN TASTROLLEN AUSGESTATTET.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLESITUNG 1,3 + 1,3 KW\R\N\R\NFEINFRäSAGGREGAT RF40 - FASE 25°\R\NJEDER MOTOR IST KOMPLETT MIT HORIZONTALEM UND VERTIKALEM TASTER UND AUF SCHLITTEN SCHWENKBAR.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,65 + 0,65 KW\R\N\R\NMULTIFUNKTIONSFRäSAGGREGAT AR30\R\NFüR FEINFRäSEN UND ECKENKOPIEREN AN WERKSTüCKEN MIT (ABS/PVC/PP) KANTEN BIS 3 MM STäRKE.\R\NECKENKOPIEREN IST AN GERADEN SOWIE AN PROFILIERTEN KANTEN ALS AUCH AN SOFT- UND POSTFORMINGPLATTEN 90° UND 180° WERKSTüCKE.\R\NFEINFRäSEN IN HOHER QUALITäT\R\N\R\NAUTOMATISCHES UMRüSTEN VON DüNN- AUF DICKKANTE\R\NES IST MöGLICH DAS AGGREGAT VOM BEDIENPULT AUS AUTOMATISCH VON DüNNKANTE (0,4 MM) AUF DICKKANTE (3,0 MM) UMZUSTELLEN.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,35 + 0,35 KW\R\N- VORSCHUBGESCHWINDIGKEIT MAX. 18 M/MIN.\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N\R\N4 PNEUMATISCHE FESTPUNKTE FüR SEITENTASTER AR30\R\NNC GESTEUERTE FESTPUNKTE ZUM VERSTELLEN DES SEITENTASTERS ZUM BEARBEITEN VON 3 DüNNKANTEN UND 2 DICKKANTEN\R\N\R\NAUTOMATISCHES WERKZEUGWECHSELMAGAZIN \R\NAUTOMATISCHEN WERKZEUGWECHSEL MIT EINEM 5-FACH MAGAZIN\R\N\R\NPROFILZIEHKLINGENAGGREGAT RB40\R\NZUR NACHBEARBEITUNG FüR ABS/PVC/PP KANTEN.\R\NENTHäLT EINE OBERE UND EINE UNTERE EINHEIT MIT VERTIKALEN UND HORIZONTALEN KOPIERSCHEIBEN.\R\NAUTOMATIS
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-net length ± 18.300 mm
net width ± 1.970 mm
max. product height ± 85 mm
3 evaporators
motor compressors not included (required capacity ± 224 kw)
dimensions cell (not included) (l x w x h) : ± 18.300 x 3.580 x 3.447 mm
evaporation temperature: - 42°c 
medium : ammonia/freon
 NET LENGTH ± 18.300 MM NET WIDTH ± 1.970 MM MAX. PRODUCT HEIGHT ± 85 MM 3 EVAPORATORS MOTOR COMPRESSORS NOT INCLUDED (REQUIRED CAPACITY ± 224 KW) DIMENSIONS CELL (NOT INCLUDED) (L X W X H) : ± 18.300 X 3.580 X 3.447 MM EVAPORATION TEMPERATURE: - 42°C MEDIUM : AMMONIA/FREON
Vendedor: Barsso NV
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 67 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 1450 mm<br/>description: sanding unit with motor lafert ims 80 s6 - 0,55kw WEIGHT APPROX.: 67 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 1450 MM
DESCRIPTION: SANDING UNIT WITH MOTOR LAFERT IMS 80 S6 - 0,55KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tyre changer - beissbarth servomat ms 67-766670000

technical data:
-pneumatic system pressure of 12 bar max
-power supply 400v / 50 hz
-3.9 a
-maximum 1,200 kpa
-year of construction: 2007
-dimensions (w x h x d) 1,040 x 1.990 x 1,400 mm
-weight: 420 kg
-painting blue ral 5015, grey ral 7011

-private sale without warranty without warranty of
-picking up local

high-performance hydraulic unit for 1.4 t bead breaker force, high speed, precise response secure firefox of both tyre beads in one operation - even in the toughest run-flat tyres. additional support arm to the leadership of the tyre bead in the deep bed thanks to optimally positioned rollers - from the workspace swivel ease of assembly and disassembly is running with pneumatic bead presser. comfortable and safe: standard pneumatic lift for heavy suv and light truck wheels center centering flange for optimum and easy clamping of wheels, removable for clamping closed rims no slipping of the rim, no problem with hanging out tyre beads left and right rotation in two different rotation speeds standard reifenschnellbefã¼llung button. very simple and precise control of all devices via a central control unit.

source: beissbarth gmbh product management TYRE CHANGER - BEISSBARTH SERVOMAT MS 67-766670000 TECHNICAL DATA: -PNEUMATIC SYSTEM PRESSURE OF 12 BAR MAX -POWER SUPPLY 400V / 50 HZ -3.9 A -MAXIMUM 1,200 KPA -YEAR OF CONSTRUCTION: 2007 -DIMENSIONS (W X H X D) 1,040 X 1.990 X 1,400 MM -WEIGHT: 420 KG -PAINTING BLUE RAL 5015, GREY RAL 7011 -PRIVATE SALE WITHOUT WARRANTY WITHOUT WARRANTY OF -PICKING UP LOCAL HIGH-PERFORMANCE HYDRAULIC UNIT FOR 1.4 T BEAD BREAKER FORCE, HIGH SPEED, PRECISE RESPONSE SECURE FIREFOX OF BOTH TYRE BEADS IN ONE OPERATION - EVEN IN THE TOUGHEST RUN-FLAT TYRES. ADDITIONAL SUPPORT ARM TO THE LEADERSHIP OF THE TYRE BEAD IN THE DEEP BED THANKS TO OPTIMALLY POSITIONED ROLLERS - FROM THE WORKSPACE SWIVEL EASE OF ASSEMBLY AND DISASSEMBLY IS RUNNING WITH PNEUMATIC BEAD PRESSER. COMFORTABLE AND SAFE: STANDARD PNEUMATIC LIFT FOR HEAVY SUV AND LIGHT TRUCK WHEELS CENTER CENTERING FLANGE FOR OPTIMUM AND EASY CLAMPING OF WHEELS, REMOVABLE FOR CLAMPING CLOSED RIMS NO SLIPPING OF THE RIM, NO PROBLEM WITH HANGING OUT TYRE BEADS LEFT AND RIGHT ROTATION IN TWO DIFFERENT ROTATION SPEEDS STANDARD REIFENSCHNELLBEF&ATILDE;&FRAC14;LLUNG BUTTON. VERY SIMPLE AND PRECISE CONTROL OF ALL DEVICES VIA A CENTRAL CONTROL UNIT. SOURCE: BEISSBARTH GMBH PRODUCT MANAGEMENT
Vendedor: Schutt-KARL GmbH
Año de construcción: usado
Precio: 499 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 1996
drucklstg.: 75 to.
gr. hole diameter: 28 mm in 10 mm st. steel - with sonderwkz. = 100 mm 6 mm
st. steel
throat depth: 510 mm
total power consumption: 5,7 kw / 400 v
machine weight: 1700 kg

equipment / accessories:

foot switch
machine lamp

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the hole punch before making a purchase in our factory under power.
 YEAR OF CONSTRUCTION: 1996 DRUCKLSTG.: 75 TO. GR. HOLE DIAMETER: 28 MM IN 10 MM ST. STEEL - WITH SONDERWKZ. = 100 MM 6 MM ST. STEEL THROAT DEPTH: 510 MM TOTAL POWER CONSUMPTION: 5,7 KW / 400 V MACHINE WEIGHT: 1700 KG EQUIPMENT / ACCESSORIES: FOOT SWITCH MACHINE LAMP ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE HOLE PUNCH BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 499 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Precio: 16.500 €
Ubicación: Land-system description:

"eurotower" sheet warehouse system, built in the year 2016 contains five trolley are consumed with the "euro flat" steel pallets by forklift at the bottom.
then these stock levels as a drawer can be pulled out to single sheet by crane and a vacuum device to remove.
the top height is 1,600 mm.
the pallets are used at front by forklift. also the manual excerpt front via swivel track walls.
the total depth with open rail doors is 3,650 mm. in the closed condition, the total depth is 2.150 mm.
the head support of the drawer block is used as additional storage space for a euro flat.
above it are 13 collar bracket storage levels for storing additional pallets by forklift.
the head support of the attachment can also be used as additional storage space.
the total height of the shelving is 6.390 mm.
the trade grid of upper storage levels is 300 mm with an inside compartment height of 200 mm.
the lower drawer levels as well as the upper collar iron levels can be adjusted in the connector pitch of 75 mm.
the shelf the system-integrated crane column for the connection of a 6 m long wall slewing crane with a side of himself. load capacity of 500 kg.

the euro flats have a capacity of 3,000 kg and a level of 100 mm for the 3.000 x 1.500 mm sheet format.
the palettes contain side attacks and two stack stanchions on the long sides.
these attacks, the pallets are 5 x stackable and the plate package is secured during transport.
thus, the pallets are also suitable for truck transportation and can be exchanged with the sheet metal suppliers, to work completely wood-free.

is the range of machines with automatic sheet feeder is turned off, the attacks can be found to have no interference contours around the plate package.
the pallets are hot-dip galvanized and can be turned off so well out there.
4,060 mm to the overall width of the system.

the system is currently installed for illustrative purposes
in the room schramberg / rottweil.
for the removal and the reinstallation, 5,000 to 5,500 (without transport) should be considered with a cost of approximately â?¬.
there are the costs, which the manufacturer has called => that!
of course, the buyer can also break down and rebuild
with its own cost calculation! 

if you have questions we are gladly available! SYSTEM DESCRIPTION: "EUROTOWER" SHEET WAREHOUSE SYSTEM, BUILT IN THE YEAR 2016 CONTAINS FIVE TROLLEY ARE CONSUMED WITH THE "EURO FLAT" STEEL PALLETS BY FORKLIFT AT THE BOTTOM. THEN THESE STOCK LEVELS AS A DRAWER CAN BE PULLED OUT TO SINGLE SHEET BY CRANE AND A VACUUM DEVICE TO REMOVE. THE TOP HEIGHT IS 1,600 MM. THE PALLETS ARE USED AT FRONT BY FORKLIFT. ALSO THE MANUAL EXCERPT FRONT VIA SWIVEL TRACK WALLS. THE TOTAL DEPTH WITH OPEN RAIL DOORS IS 3,650 MM. IN THE CLOSED CONDITION, THE TOTAL DEPTH IS 2.150 MM. THE HEAD SUPPORT OF THE DRAWER BLOCK IS USED AS ADDITIONAL STORAGE SPACE FOR A EURO FLAT. ABOVE IT ARE 13 COLLAR BRACKET STORAGE LEVELS FOR STORING ADDITIONAL PALLETS BY FORKLIFT. THE HEAD SUPPORT OF THE ATTACHMENT CAN ALSO BE USED AS ADDITIONAL STORAGE SPACE. THE TOTAL HEIGHT OF THE SHELVING IS 6.390 MM. THE TRADE GRID OF UPPER STORAGE LEVELS IS 300 MM WITH AN INSIDE COMPARTMENT HEIGHT OF 200 MM. THE LOWER DRAWER LEVELS AS WELL AS THE UPPER COLLAR IRON LEVELS CAN BE ADJUSTED IN THE CONNECTOR PITCH OF 75 MM. THE SHELF THE SYSTEM-INTEGRATED CRANE COLUMN FOR THE CONNECTION OF A 6 M LONG WALL SLEWING CRANE WITH A SIDE OF HIMSELF. LOAD CAPACITY OF 500 KG. THE EURO FLATS HAVE A CAPACITY OF 3,000 KG AND A LEVEL OF 100 MM FOR THE 3.000 X 1.500 MM SHEET FORMAT. THE PALETTES CONTAIN SIDE ATTACKS AND TWO STACK STANCHIONS ON THE LONG SIDES. THESE ATTACKS, THE PALLETS ARE 5 X STACKABLE AND THE PLATE PACKAGE IS SECURED DURING TRANSPORT. THUS, THE PALLETS ARE ALSO SUITABLE FOR TRUCK TRANSPORTATION AND CAN BE EXCHANGED WITH THE SHEET METAL SUPPLIERS, TO WORK COMPLETELY WOOD-FREE. IS THE RANGE OF MACHINES WITH AUTOMATIC SHEET FEEDER IS TURNED OFF, THE ATTACKS CAN BE FOUND TO HAVE NO INTERFERENCE CONTOURS AROUND THE PLATE PACKAGE. THE PALLETS ARE HOT-DIP GALVANIZED AND CAN BE TURNED OFF SO WELL OUT THERE. 4,060 MM TO THE OVERALL WIDTH OF THE SYSTEM. THE SYSTEM IS CURRENTLY INSTALLED FOR ILLUSTRATIVE PURPOSES IN THE ROOM SCHRAMBERG / ROTTWEIL. FOR THE REMOVAL AND THE REINSTALLATION, 5,000 TO 5,500 (WITHOUT TRANSPORT) SHOULD BE CONSIDERED WITH A COST OF APPROXIMATELY &ACIRC;?&NOT;. THERE ARE THE COSTS, WHICH THE MANUFACTURER HAS CALLED => THAT! OF COURSE, THE BUYER CAN ALSO BREAK DOWN AND REBUILD WITH ITS OWN COST CALCULATION! IF YOU HAVE QUESTIONS WE ARE GLADLY AVAILABLE!
Vendedor: P.+ K. Lager- und Betriebseinrichtungen GmbH & Co. KG
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: cazeneuve 
model: maxica 590 
application type: turning 
machine type: lathes 
availability: immediately 
production year: 2001 
location: the netherlands 
origin country: france 
production hours: 7500

general data
measurements width: 3620 mm 
measurements depth: 1400 mm 
measurements height: 1830 mm 
machine weight: 2800 kg

control unit
brand: siemens
model: sinumerik 808d

movement
x-axis movement: 282 mm 
z-axis movement: 950 mm

workpiece
workpiece drm: 583 mm

media
main electronic connection: 380 v

additional equipment
1: software 3d taster (special rims)

see full technical specifications of this machine at: abc://bit.ly/2fxxghw
 OVERVIEW BRAND: CAZENEUVE MODEL: MAXICA 590 APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2001 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: FRANCE PRODUCTION HOURS: 7500 GENERAL DATA MEASUREMENTS WIDTH: 3620 MM MEASUREMENTS DEPTH: 1400 MM MEASUREMENTS HEIGHT: 1830 MM MACHINE WEIGHT: 2800 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 808D MOVEMENT X-AXIS MOVEMENT: 282 MM Z-AXIS MOVEMENT: 950 MM WORKPIECE WORKPIECE DRM: 583 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V ADDITIONAL EQUIPMENT 1: SOFTWARE 3D TASTER (SPECIAL RIMS) SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2FXXGHW
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-type of machine: hole punching machine,
manufacturer: ims,
model: phy 75,
year of construction: 1996
condition: good,.
type of offer: used machine,
  .,.	
technical data:.
performance in mm: 75 t, diameter 28 x 20 mm,.
drive type: el / hydr.,.
drive: 5.7 kw,
throat depth: 510 mm, diameter 100 x 6 mm,.
weight: 1650 kg
  .,.
the machine is in a good shape and ready for operation. it can be visited and demonstrated at our location.,.
  .,.
we will be pleased if you take an interest in our offer. .,.

 TYPE OF MACHINE: HOLE PUNCHING MACHINE, MANUFACTURER: IMS, MODEL: PHY 75, YEAR OF CONSTRUCTION: 1996 CONDITION: GOOD,. TYPE OF OFFER: USED MACHINE, .,. TECHNICAL DATA:. PERFORMANCE IN MM: 75 T, DIAMETER 28 X 20 MM,. DRIVE TYPE: EL / HYDR.,. DRIVE: 5.7 KW, THROAT DEPTH: 510 MM, DIAMETER 100 X 6 MM,. WEIGHT: 1650 KG .,. THE MACHINE IS IN A GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. .,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER. .,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: ims
model: hy 120
application type: punching 
machine type: punching machines 
availability: immediately 
production year: 2001
location: the netherlands
origin country: italy
production hours: 45000

general data
measurements width: 1950 mm 
measurements depth: 850 mm 
measurements height: 2300 mm 
machine weight: 2100 kg

main drive
punching force: 1200 kn

movement
x-axis movement: 600 mm

max material thickness
steel: 40 mm

media
main electronic connection: 380 v

see full technical specifications of this machine at:
abc://bit.ly/2zxeyr1 OVERVIEW BRAND: IMS MODEL: HY 120 APPLICATION TYPE: PUNCHING MACHINE TYPE: PUNCHING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2001 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: ITALY PRODUCTION HOURS: 45000 GENERAL DATA MEASUREMENTS WIDTH: 1950 MM MEASUREMENTS DEPTH: 850 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 2100 KG MAIN DRIVE PUNCHING FORCE: 1200 KN MOVEMENT X-AXIS MOVEMENT: 600 MM MAX MATERIAL THICKNESS STEEL: 40 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2ZXEYR1
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand 6-hi copper foil rolling mill
mfc.:	cnpt, ims, vollmer, siemens, abb	built:	2014	
type:	6-hi-reversing	
incoming width:	450?650 mm		rolling force:	1200 kn
entry thickness:	approx. 0.3 mm	deviation:	longitude: ±1.5%	traverse: ±1%
exit thickness:		min. 0.009 mm	passline height:	+900 mm
overlapping:		?±0.5 mm		telescoping:	?2 mm		flatness:	?15 i
qty. 2 ims gauge meters			agc system supplied by cnpt 	
1 vollmer shapemeter roll 		1 cnpt shapemeter roll
rolling speed:	max. 600 m/min	threading speed:	12 m/min
 QTY. 1 SECOND-HAND 6-HI COPPER FOIL ROLLING MILL MFC.: CNPT, IMS, VOLLMER, SIEMENS, ABB BUILT: 2014 TYPE: 6-HI-REVERSING INCOMING WIDTH: 450?650 MM ROLLING FORCE: 1200 KN ENTRY THICKNESS: APPROX. 0.3 MM DEVIATION: LONGITUDE: ±1.5% TRAVERSE: ±1% EXIT THICKNESS: MIN. 0.009 MM PASSLINE HEIGHT: +900 MM OVERLAPPING: ?±0.5 MM TELESCOPING: ?2 MM FLATNESS: ?15 I QTY. 2 IMS GAUGE METERS AGC SYSTEM SUPPLIED BY CNPT 1 VOLLMER SHAPEMETER ROLL 1 CNPT SHAPEMETER ROLL ROLLING SPEED: MAX. 600 M/MIN THREADING SPEED: 12 M/MIN
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: 750 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-control system: imsnc	
machine hours: 22410 hours	
laser power: 3 kw with the option to increase to 5 kw	
worktable: 3100 x 1600 mm	
with 2 cutting heads	
maximum cutting performance:	
soft structural steel: 20 mm	
stainless steel: 12 mm	
aluminum: 10 mm	
bronze: 10 mm	
copper: 3 mm	
processor-controlled ac actuators with irc	
positioning:	
60000 mm / min in one axis	
80000 mm / min in both axes	
positioning accuracy: +/- 0:03 mm according to din 28 206	
repeat position: +/- 0:03 mm according to din 28 206	
acceleration: 3: 5 m / s2	
drives:	
high-precision gearbox - double-sided portal drive drive motors: maintenance-free	 CONTROL SYSTEM: IMSNC MACHINE HOURS: 22410 HOURS LASER POWER: 3 KW WITH THE OPTION TO INCREASE TO 5 KW WORKTABLE: 3100 X 1600 MM WITH 2 CUTTING HEADS MAXIMUM CUTTING PERFORMANCE: SOFT STRUCTURAL STEEL: 20 MM STAINLESS STEEL: 12 MM ALUMINUM: 10 MM BRONZE: 10 MM COPPER: 3 MM PROCESSOR-CONTROLLED AC ACTUATORS WITH IRC POSITIONING: 60000 MM / MIN IN ONE AXIS 80000 MM / MIN IN BOTH AXES POSITIONING ACCURACY: +/- 0:03 MM ACCORDING TO DIN 28 206 REPEAT POSITION: +/- 0:03 MM ACCORDING TO DIN 28 206 ACCELERATION: 3: 5 M / S2 DRIVES: HIGH-PRECISION GEARBOX - DOUBLE-SIDED PORTAL DRIVE DRIVE MOTORS: MAINTENANCE-FREE
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 500 €
Ubicación: Land-DE Germany, 23626 Ratekau
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-meccanoplastica grinder 1200t
manifacturer: meccanoplastica
type: 1200t.
construction year 1995.
infeed 1195x330 mm.
cutting chamber 1215 x 215 mm.
suitable for thermoformed trims and such.
screen with 9 mm. holes others available on request.
totally reconditioned.
suitable for thermoformed trims and such.
screen with 9 mm. holes others available on request.
totally reconditioned. MECCANOPLASTICA GRINDER 1200T MANIFACTURER: MECCANOPLASTICA TYPE: 1200T. CONSTRUCTION YEAR 1995. INFEED 1195X330 MM. CUTTING CHAMBER 1215 X 215 MM. SUITABLE FOR THERMOFORMED TRIMS AND SUCH. SCREEN WITH 9 MM. HOLES OTHERS AVAILABLE ON REQUEST. TOTALLY RECONDITIONED. SUITABLE FOR THERMOFORMED TRIMS AND SUCH. SCREEN WITH 9 MM. HOLES OTHERS AVAILABLE ON REQUEST. TOTALLY RECONDITIONED.
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: used machinery auction RESALE 5.000 €
Ubicación: Land-weight approx.: 3800 kg<br/>dimensions (l x w x h) approx.: 7000 x 1100 x 1100 mm<br/>description: imf drum twister type stranding line 710 mm very recent and excellent condition drum twisting line used before for stranding yarns onto 710 mm spools, prior closing operation.  the line is composed of: - 800 mm central pay-off, rotating type - die holder - 710 mm rotating drum twister - line shaft with 11 kw motor - electrical cabinet flange diameter 710 mm  oaw 500 mm  bobbin holding on shaft  loading system from top  central pay-off dia. 915 mm  oaw 600 mm  loading between pintles  tension setting cord brake  drive line shaft  die holder longitudinally adjustable  capstan: double wheel  number of grooves 4  capstan dia. 200 mm groove dia 35 mm  cable passage diameter 25 mm on take-up  main drive: ac motor 5,5 kw 955 rpm  transmission of bobbin: through gears and chains  winding force mechanical clutch  electrical cabinet: available  electronic lenze ac drive WEIGHT APPROX.: 3800 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 1100 X 1100 MM
DESCRIPTION: IMF DRUM TWISTER TYPE STRANDING LINE 710 MM VERY RECENT AND EXCELLENT CONDITION DRUM TWISTING LINE USED BEFORE FOR STRANDING YARNS ONTO 710 MM SPOOLS, PRIOR CLOSING OPERATION. THE LINE IS COMPOSED OF: - 800 MM CENTRAL PAY-OFF, ROTATING TYPE - DIE HOLDER - 710 MM ROTATING DRUM TWISTER - LINE SHAFT WITH 11 KW MOTOR - ELECTRICAL CABINET FLANGE DIAMETER 710 MM OAW 500 MM BOBBIN HOLDING ON SHAFT LOADING SYSTEM FROM TOP CENTRAL PAY-OFF DIA. 915 MM OAW 600 MM LOADING BETWEEN PINTLES TENSION SETTING CORD BRAKE DRIVE LINE SHAFT DIE HOLDER LONGITUDINALLY ADJUSTABLE CAPSTAN: DOUBLE WHEEL NUMBER OF GROOVES 4 CAPSTAN DIA. 200 MM GROOVE DIA 35 MM CABLE PASSAGE DIAMETER 25 MM ON TAKE-UP MAIN DRIVE: AC MOTOR 5,5 KW 955 RPM TRANSMISSION OF BOBBIN: THROUGH GEARS AND CHAINS WINDING FORCE MECHANICAL CLUTCH ELECTRICAL CABINET: AVAILABLE ELECTRONIC LENZE AC DRIVE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-globe trim saw (compensation saw) for plywood, built 2006herstellung: globe machinery u.s. (for the plywood industry) globe deals since its foundation in 1917 with improving plywood machines, a tradition that the up to date with a comprehensive machine park for material processing fortsetzt.vom dryer outlet to the finished produkt.die globe cross-cut saws (in north america as) GLOBE TRIM SAW (COMPENSATION SAW) FOR PLYWOOD, BUILT 2006HERSTELLUNG: GLOBE MACHINERY U.S. (FOR THE PLYWOOD INDUSTRY) GLOBE DEALS SINCE ITS FOUNDATION IN 1917 WITH IMPROVING PLYWOOD MACHINES, A TRADITION THAT THE UP TO DATE WITH A COMPREHENSIVE MACHINE PARK FOR MATERIAL PROCESSING FORTSETZT.VOM DRYER OUTLET TO THE FINISHED PRODUKT.DIE GLOBE CROSS-CUT SAWS (IN NORTH AMERICA AS)
Vendedor: Chicagowood Malax
Año de construcción: usado
Precio: used machinery auction RESALE 9.800 €
Ubicación: Land-weight approx.: 7100 kg<br/>dimensions (l x w x h) approx.: 10000 x 1500 x 1950 mm<br/>description: 1 x imf planetary closing line 6 x 710 mm, synth. ropes excellent condition planetary cage designed for closing synthetic ropes or light products in a 1+6 construction, for diameter up to 60 mm.  the cage is designed for holding 710 mm bobbin.  the line is composed of:  - planetary cage 6 x 710 mm with ac motor - die holder - double wheel capstan 600 mm - 60 mm groove - take-up 1100 mm, shaft type - electrical cabinet - many gears number of bobbins 6 (3+3)  flange diameter 710 mm  oaw 500 mm (incl. brake track)  bobbin holding on shaft  tension control cord (on bobbin track)  product diameter: 8 to 60 mm  passage on each cradle 28 mm dia.  rotation speed: 50 tpm  central tube 150 mm  backtwist type: gears, on back  underrollers 300 mm steel  width 75 mm  capstan: double wheel (4+5)  diameter 600 mm (bottom groove)  groove dia. 60 mm lay-length change change gears  drive: ac motor 11kw 1450 rpm  trasmission timing belt  reducer sz die holder available  take-up:  flange diameter 1100 mm x 800 mm  bobbin holding on shaft 70 mm  winding tension mechanical friction  traverse system: screw/cam type system  electrical cabinet: available  electronic lenze drive (ac drive)  power supply 380 v 50 hz  support of cage on frame, no foundation  total length 9 m WEIGHT APPROX.: 7100 KG
DIMENSIONS (L X W X H) APPROX.: 10000 X 1500 X 1950 MM
DESCRIPTION: 1 X IMF PLANETARY CLOSING LINE 6 X 710 MM, SYNTH. ROPES EXCELLENT CONDITION PLANETARY CAGE DESIGNED FOR CLOSING SYNTHETIC ROPES OR LIGHT PRODUCTS IN A 1+6 CONSTRUCTION, FOR DIAMETER UP TO 60 MM. THE CAGE IS DESIGNED FOR HOLDING 710 MM BOBBIN. THE LINE IS COMPOSED OF: - PLANETARY CAGE 6 X 710 MM WITH AC MOTOR - DIE HOLDER - DOUBLE WHEEL CAPSTAN 600 MM - 60 MM GROOVE - TAKE-UP 1100 MM, SHAFT TYPE - ELECTRICAL CABINET - MANY GEARS NUMBER OF BOBBINS 6 (3+3) FLANGE DIAMETER 710 MM OAW 500 MM (INCL. BRAKE TRACK) BOBBIN HOLDING ON SHAFT TENSION CONTROL CORD (ON BOBBIN TRACK) PRODUCT DIAMETER: 8 TO 60 MM PASSAGE ON EACH CRADLE 28 MM DIA. ROTATION SPEED: 50 TPM CENTRAL TUBE 150 MM BACKTWIST TYPE: GEARS, ON BACK UNDERROLLERS 300 MM STEEL WIDTH 75 MM CAPSTAN: DOUBLE WHEEL (4+5) DIAMETER 600 MM (BOTTOM GROOVE) GROOVE DIA. 60 MM LAY-LENGTH CHANGE CHANGE GEARS DRIVE: AC MOTOR 11KW 1450 RPM TRASMISSION TIMING BELT REDUCER SZ DIE HOLDER AVAILABLE TAKE-UP: FLANGE DIAMETER 1100 MM X 800 MM BOBBIN HOLDING ON SHAFT 70 MM WINDING TENSION MECHANICAL FRICTION TRAVERSE SYSTEM: SCREW/CAM TYPE SYSTEM ELECTRICAL CABINET: AVAILABLE ELECTRONIC LENZE DRIVE (AC DRIVE) POWER SUPPLY 380 V 50 HZ SUPPORT OF CAGE ON FRAME, NO FOUNDATION TOTAL LENGTH 9 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-mir horizontal injection moulding machine
type: mpo 135/500
year 2000
mould thickness 60mm
screw diam. 50mm
theoretical injection capacity 412cm3
injection rate 175cm3/sec
injection pressure 1480 bar
rpm screw rotation 240 min-1
cylinder heating power 10.5kw
temperature control zones 3 = 1 n
approaching carriage force 45kn
clamp unit
mould closing force 1335kn
moving platen stroke 520mm
max. daylight between platens 720mm
mould height min-max. 200mm
platen dims. h x l: 640 x 640 mm
distance between tie-bars 420 x 420 mm
tie-bar dims: 75mm
hydraulic ejection force 22kn
hydraulic ejection stroke 115mm
general data
motor pump power 15kw
max. power 26kw
oil tank capacity 240 dm3
with silicone stuffer MIR HORIZONTAL INJECTION MOULDING MACHINE TYPE: MPO 135/500 YEAR 2000 MOULD THICKNESS 60MM SCREW DIAM. 50MM THEORETICAL INJECTION CAPACITY 412CM3 INJECTION RATE 175CM3/SEC INJECTION PRESSURE 1480 BAR RPM SCREW ROTATION 240 MIN-1 CYLINDER HEATING POWER 10.5KW TEMPERATURE CONTROL ZONES 3 = 1 N APPROACHING CARRIAGE FORCE 45KN CLAMP UNIT MOULD CLOSING FORCE 1335KN MOVING PLATEN STROKE 520MM MAX. DAYLIGHT BETWEEN PLATENS 720MM MOULD HEIGHT MIN-MAX. 200MM PLATEN DIMS. H X L: 640 X 640 MM DISTANCE BETWEEN TIE-BARS 420 X 420 MM TIE-BAR DIMS: 75MM HYDRAULIC EJECTION FORCE 22KN HYDRAULIC EJECTION STROKE 115MM GENERAL DATA MOTOR PUMP POWER 15KW MAX. POWER 26KW OIL TANK CAPACITY 240 DM3 WITH SILICONE STUFFER
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 3000 mm<br/>gear width: 1200 mm<br/>max. module: 34 <br/>min. module: 2 <br/>root circle diameter: 150 mm<br/>tip circle diameter: 3000 mm<br/>no. of teeth: 5 - 1000 <br/>max. helix angle: +/- 35 °<br/>pressure angle: 14 / 31 °<br/>workpiece weight: 20.000 kg<br/>stroke length max.: 1250 mm<br/>double strokes/min.: 80 - 350 stück<br/>rotary table diameter: 2000 mm<br/>boring diameter: 600/710 mm<br/>grinding wheel size: 270/350 x 127 x 40-63 mm<br/>electrics - voltage/frequency: 400 / 50 v/hz<br/>control: schleicher promodul-u <br/>total power requirement: 45 kw<br/>weight of the machine ca.: 85 t<br/>dimensions of the machine ca.: 9 x 11 x 4,8 m<br/>gear grinding machine equipped with:<br/>- cnc control schleicher promodul u<br/>with direct input of all gear parameters with appropriate software or <br/>subprograms for the automatic cycle with all delivery options.<br/><br/>- internal and external grinding head (exchangeable)<br/>- zeiss / höfler measuring device on the machine (höfler tps software for spur <br/>and helical gears)<br/>- width balancing device mounted on the grinding head, moved over the lever <br/>system and template, the height crowning is generated by the cnc 2-axis <br/>dressing device.<br/>- grinding slide inclinable up to 35 °, this makes it possible to grind <br/>straight and helical gears cone-shaped as well as to grind zr-rims u.zr-scraper <br/>wheels.<br/>- profile correction possible by appropriate dressing using the built-up cnc <br/>2-axis dresser with driven diamond disc.<br/>- all-round splash guard with sliding doors, oil cooler, exhauster, separate <br/>control cabinet and sep. hydraulics, stairs and platforms,<br/><br/>machine has a defect in the control cpu (burned out) - therefore, an exchange / <br/>modernization of the controller is appropriate<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 3000 MM
GEAR WIDTH: 1200 MM
MAX. MODULE: 34
MIN. MODULE: 2
ROOT CIRCLE DIAMETER: 150 MM
TIP CIRCLE DIAMETER: 3000 MM
NO. OF TEETH: 5 - 1000
MAX. HELIX ANGLE: +/- 35 °
PRESSURE ANGLE: 14 / 31 °
WORKPIECE WEIGHT: 20.000 KG
STROKE LENGTH MAX.: 1250 MM
DOUBLE STROKES/MIN.: 80 - 350 STüCK
ROTARY TABLE DIAMETER: 2000 MM
BORING DIAMETER: 600/710 MM
GRINDING WHEEL SIZE: 270/350 X 127 X 40-63 MM
ELECTRICS - VOLTAGE/FREQUENCY: 400 / 50 V/HZ
CONTROL: SCHLEICHER PROMODUL-U
TOTAL POWER REQUIREMENT: 45 KW
WEIGHT OF THE MACHINE CA.: 85 T
DIMENSIONS OF THE MACHINE CA.: 9 X 11 X 4,8 M
GEAR GRINDING MACHINE EQUIPPED WITH:
- CNC CONTROL SCHLEICHER PROMODUL U
WITH DIRECT INPUT OF ALL GEAR PARAMETERS WITH APPROPRIATE SOFTWARE OR
SUBPROGRAMS FOR THE AUTOMATIC CYCLE WITH ALL DELIVERY OPTIONS.

- INTERNAL AND EXTERNAL GRINDING HEAD (EXCHANGEABLE)
- ZEISS / HöFLER MEASURING DEVICE ON THE MACHINE (HöFLER TPS SOFTWARE FOR SPUR
AND HELICAL GEARS)
- WIDTH BALANCING DEVICE MOUNTED ON THE GRINDING HEAD, MOVED OVER THE LEVER
SYSTEM AND TEMPLATE, THE HEIGHT CROWNING IS GENERATED BY THE CNC 2-AXIS
DRESSING DEVICE.
- GRINDING SLIDE INCLINABLE UP TO 35 °, THIS MAKES IT POSSIBLE TO GRIND
STRAIGHT AND HELICAL GEARS CONE-SHAPED AS WELL AS TO GRIND ZR-RIMS U.ZR-SCRAPER
WHEELS.
- PROFILE CORRECTION POSSIBLE BY APPROPRIATE DRESSING USING THE BUILT-UP CNC
2-AXIS DRESSER WITH DRIVEN DIAMOND DISC.
- ALL-ROUND SPLASH GUARD WITH SLIDING DOORS, OIL COOLER, EXHAUSTER, SEPARATE
CONTROL CABINET AND SEP. HYDRAULICS, STAIRS AND PLATFORMS,

MACHINE HAS A DEFECT IN THE CONTROL CPU (BURNED OUT) - THEREFORE, AN EXCHANGE /
MODERNIZATION OF THE CONTROLLER IS APPROPRIATE




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-the forging hammer lasco kh 315 can still be viewed under power.

a buyer of the machine gets free of charge:
-direct spring support
-spare parts worth about 11,000 eur

we bought the machine from presstrade in 2006.

then it was overhauled by hok maschinenbau gmbh:
-controller modification - new plc control system, control cabinet, foot switch with double pedal and two top switches to slow down and for the security module, oscilator, deep hole control bar, flange with cap on the tax staff drilled new piston rod for control bar,
-rework schabotte usage
-drive completely cleaned
-main valve - housing renewed, replaced piston
-hydraulic cylinders - honed cylinder tube
-control - valve on slow/slow cover - new, beat valve / rise - new, bosch valve - new filter screen - new steering pump - new
-hydraulic pump - axial disk - new, main spindle seat top and main spindle seat ground, below--cylindrical clean bushings new right spindle seat top, right spindle seat bottom, left spindle seat top, left spindle seat make, top, cylindrical clean polished, bushings make new
-management system - sleeve top - new guide bush down - new, safety ball, piston rod - new, piston - new, piston nuts - new
-cooling - new water cooling (air coolers, circulating pump, in-line filter)
-heating - new electric heater with flange connection on the tank lid
-hammer bear - after milling the guiding surfaces, for milling of die fugue, as well as radii and joint relief, repositioning radius in the rock hole, federal bear lock plate welded up, relaxed and refinish, clean out spindle hole bear lock plate and bush bear castle wedges shrink, - new buffer plate - turn bronze welding and customize bear castle rubbers on the new bore dimension in the hammer bear, aluminium - new, new, - drive fastening - intermediate rubber - new meggiflex - new,
-bar blocks - shims - new store plates, rails - new
-headstock - pass bar - new, rubber swing metal bars - new
-main engine - new storage, electrical winding checks
    THE FORGING HAMMER LASCO KH 315 CAN STILL BE VIEWED UNDER POWER. A BUYER OF THE MACHINE GETS FREE OF CHARGE: -DIRECT SPRING SUPPORT -SPARE PARTS WORTH ABOUT 11,000 EUR WE BOUGHT THE MACHINE FROM PRESSTRADE IN 2006. THEN IT WAS OVERHAULED BY HOK MASCHINENBAU GMBH: -CONTROLLER MODIFICATION - NEW PLC CONTROL SYSTEM, CONTROL CABINET, FOOT SWITCH WITH DOUBLE PEDAL AND TWO TOP SWITCHES TO SLOW DOWN AND FOR THE SECURITY MODULE, OSCILATOR, DEEP HOLE CONTROL BAR, FLANGE WITH CAP ON THE TAX STAFF DRILLED NEW PISTON ROD FOR CONTROL BAR, -REWORK SCHABOTTE USAGE -DRIVE COMPLETELY CLEANED -MAIN VALVE - HOUSING RENEWED, REPLACED PISTON -HYDRAULIC CYLINDERS - HONED CYLINDER TUBE -CONTROL - VALVE ON SLOW/SLOW COVER - NEW, BEAT VALVE / RISE - NEW, BOSCH VALVE - NEW FILTER SCREEN - NEW STEERING PUMP - NEW -HYDRAULIC PUMP - AXIAL DISK - NEW, MAIN SPINDLE SEAT TOP AND MAIN SPINDLE SEAT GROUND, BELOW--CYLINDRICAL CLEAN BUSHINGS NEW RIGHT SPINDLE SEAT TOP, RIGHT SPINDLE SEAT BOTTOM, LEFT SPINDLE SEAT TOP, LEFT SPINDLE SEAT MAKE, TOP, CYLINDRICAL CLEAN POLISHED, BUSHINGS MAKE NEW -MANAGEMENT SYSTEM - SLEEVE TOP - NEW GUIDE BUSH DOWN - NEW, SAFETY BALL, PISTON ROD - NEW, PISTON - NEW, PISTON NUTS - NEW -COOLING - NEW WATER COOLING (AIR COOLERS, CIRCULATING PUMP, IN-LINE FILTER) -HEATING - NEW ELECTRIC HEATER WITH FLANGE CONNECTION ON THE TANK LID -HAMMER BEAR - AFTER MILLING THE GUIDING SURFACES, FOR MILLING OF DIE FUGUE, AS WELL AS RADII AND JOINT RELIEF, REPOSITIONING RADIUS IN THE ROCK HOLE, FEDERAL BEAR LOCK PLATE WELDED UP, RELAXED AND REFINISH, CLEAN OUT SPINDLE HOLE BEAR LOCK PLATE AND BUSH BEAR CASTLE WEDGES SHRINK, - NEW BUFFER PLATE - TURN BRONZE WELDING AND CUSTOMIZE BEAR CASTLE RUBBERS ON THE NEW BORE DIMENSION IN THE HAMMER BEAR, ALUMINIUM - NEW, NEW, - DRIVE FASTENING - INTERMEDIATE RUBBER - NEW MEGGIFLEX - NEW, -BAR BLOCKS - SHIMS - NEW STORE PLATES, RAILS - NEW -HEADSTOCK - PASS BAR - NEW, RUBBER SWING METAL BARS - NEW -MAIN ENGINE - NEW STORAGE, ELECTRICAL WINDING CHECKS
Vendedor: KUZNIA Sulkowice SA
Año de construcción: usado
Ubicación: Land-pressure:     40 t<br/>throat:        mm<br/>stroke:        mm<br/>--------------------------------------------------:  <br/>press design:  <br/>- drive system: eccentric / crank:        <br/>- openings in uprights: yes:        <br/>- opening in table: yes:        <br/>press forces:  <br/>- total force (nominal):     40 to<br/>press table:  <br/>- table surface (left-right):    600 mm<br/>- table surface (front-back):    360 mm<br/>- height above floor level:    800 mm<br/>- opening in bed (diameter):    110 mm<br/>slide:  <br/>- slide force:     40 to<br/>- table surface (left-right):    270 mm<br/>- table surface (front-back):    175 mm<br/>- stroke rate (max.):    145 /min<br/>slide (mechan. press):  <br/>- slide adjustment:     65 mm<br/>- stroke max.:     75 mm<br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:    350 mm<br/>electrical specifications:  <br/>- total power consumption:    2.2 kw<br/>dimensions / weights:  <br/>- space requirements -left/right-:    1.1 mm<br/>- space requirements -front/back-:    1.2 mm<br/>- total height:    2.1 mm<br/>- total weight approx.:   1500 kg<br/>attachments (presses):  <br/>- 2-hand engagement: yes:        <br/>- acc. to actual accident protection regulation: y:        <br/>- european ce standards: yes:        <br/><br/><br/><br/><br/> PRESSURE: 40 T
THROAT: MM
STROKE: MM
--------------------------------------------------:
PRESS DESIGN:
- DRIVE SYSTEM: ECCENTRIC / CRANK:
- OPENINGS IN UPRIGHTS: YES:
- OPENING IN TABLE: YES:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 40 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 600 MM
- TABLE SURFACE (FRONT-BACK): 360 MM
- HEIGHT ABOVE FLOOR LEVEL: 800 MM
- OPENING IN BED (DIAMETER): 110 MM
SLIDE:
- SLIDE FORCE: 40 TO
- TABLE SURFACE (LEFT-RIGHT): 270 MM
- TABLE SURFACE (FRONT-BACK): 175 MM
- STROKE RATE (MAX.): 145 /MIN
SLIDE (MECHAN. PRESS):
- SLIDE ADJUSTMENT: 65 MM
- STROKE MAX.: 75 MM
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 350 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 2.2 KW
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 1.1 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 1.2 MM
- TOTAL HEIGHT: 2.1 MM
- TOTAL WEIGHT APPROX.: 1500 KG
ATTACHMENTS (PRESSES):
- 2-HAND ENGAGEMENT: YES:
- ACC. TO ACTUAL ACCIDENT PROTECTION REGULATION: Y:
- EUROPEAN CE STANDARDS: YES:




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-i have to sell these 2 tires with rims  I HAVE TO SELL THESE 2 TIRES WITH RIMS
Vendedor: Denninger
Año de construcción: usado
Ubicación: Land-manufacturer: 5 achs leimspritzanlage, type: superfici, year: 2000, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 3500, min.-max. workpiece height in mm: 10-100, working widht max mm: 1300, einlauband: 3500, enststaubung: 2 bürsten mit ioniesierung, spraying heads - total: 1, zuluftfilterdecke: yes, abdunstrockner mm : 7500, düesentrockner 1 mm temperatur: ca. 45, 5 axis machine: yes, stainless steel design: yes, spraying stations: 1, working widht mm: 1500, feeding speed m/min: 3-5, lichte durchlaufhöhe mm: 100, dry exhauster: yes, transport system paper: yes, lackierpistolen: 2, materialförderpumpen: krautzberger, spraying heads - total: 1, work piece cleaning: yes, work piece detection: yes, conveyour system: band, year :2000 MANUFACTURER: 5 ACHS LEIMSPRITZANLAGE, TYPE: SUPERFICI, YEAR: 2000, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 3500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, WORKING WIDHT MAX MM: 1300, EINLAUBAND: 3500, ENSTSTAUBUNG: 2 BüRSTEN MIT IONIESIERUNG, SPRAYING HEADS - TOTAL: 1, ZULUFTFILTERDECKE: YES, ABDUNSTROCKNER MM : 7500, DüESENTROCKNER 1 MM TEMPERATUR: CA. 45, 5 AXIS MACHINE: YES, STAINLESS STEEL DESIGN: YES, SPRAYING STATIONS: 1, WORKING WIDHT MM: 1500, FEEDING SPEED M/MIN: 3-5, LICHTE DURCHLAUFHöHE MM: 100, DRY EXHAUSTER: YES, TRANSPORT SYSTEM PAPER: YES, LACKIERPISTOLEN: 2, MATERIALFöRDERPUMPEN: KRAUTZBERGER, SPRAYING HEADS - TOTAL: 1, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, YEAR :2000
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-used tires from dumpers and heavy loaders
well-known manufacturers such as goodyear, dunlop, michelin, continental
different sizes e.g. 18.00 r25, 14.00-24, 21.00 r35, 33.25-35
conditions and tread depth see photos
available with or without rims USED TIRES FROM DUMPERS AND HEAVY LOADERS WELL-KNOWN MANUFACTURERS SUCH AS GOODYEAR, DUNLOP, MICHELIN, CONTINENTAL DIFFERENT SIZES E.G. 18.00 R25, 14.00-24, 21.00 R35, 33.25-35 CONDITIONS AND TREAD DEPTH SEE PHOTOS AVAILABLE WITH OR WITHOUT RIMS
Vendedor: ENDERS Produktion GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 5.700 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 1100 x 1200 x 2200 mm<br/>description: 155 strokes / min 1 , adjustable stroke 0-60 mm, table 500 x 310 mm, slide adjustment 50 mm, flywheel 155 rpm,<br> without mold WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 1200 X 2200 MM
DESCRIPTION: 155 STROKES / MIN 1 , ADJUSTABLE STROKE 0-60 MM, TABLE 500 X 310 MM, SLIDE ADJUSTMENT 50 MM, FLYWHEEL 155 RPM,
WITHOUT MOLD
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 55.000 €
Ubicación: Land-
table size l: 12000 mm, table size w: 3000 mm, max. plate size l: 12000 mm, 
max. plate size w: 3000 mm, dimension l: 15100 mm, dimension w: 5000 mm, dimension h: 2500 mm, with 4 cutting heads; with 2 high pressure pumps “resato” type pje-8-4000, max. working pressure 3800 bar, 7.6 l/min; control system “microstep” type imsnc, with digital control panel msnc ro2, standalone control panel; 4 allfi abrassive tanks; water treatment tank 

TABLE SIZE L: 12000 MM, TABLE SIZE W: 3000 MM, MAX. PLATE SIZE L: 12000 MM, MAX. PLATE SIZE W: 3000 MM, DIMENSION L: 15100 MM, DIMENSION W: 5000 MM, DIMENSION H: 2500 MM, WITH 4 CUTTING HEADS; WITH 2 HIGH PRESSURE PUMPS “RESATO” TYPE PJE-8-4000, MAX. WORKING PRESSURE 3800 BAR, 7.6 L/MIN; CONTROL SYSTEM “MICROSTEP” TYPE IMSNC, WITH DIGITAL CONTROL PANEL MSNC RO2, STANDALONE CONTROL PANEL; 4 ALLFI ABRASSIVE TANKS; WATER TREATMENT TANK
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-manufacturer: hoffman dübelfix, type: dea , year: 1995, control: hand, beleimwerkzeuge: 1, dovel insertion: yes, dovel diameter mm: 6 x 30, niederdruckleimsystem: yes, year :1995 MANUFACTURER: HOFFMAN D&UUML;BELFIX, TYPE: DEA , YEAR: 1995, CONTROL: HAND, BELEIMWERKZEUGE: 1, DOVEL INSERTION: YES, DOVEL DIAMETER MM: 6 X 30, NIEDERDRUCKLEIMSYSTEM: YES, YEAR :1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 40.000 €
Ubicación: Land-cutting speed: 420 m/min, track width: 3900 mm, table size l: 12000 mm, table size w: 3500 mm, brand and model plasma unit: hypertherm hpr 260xd agc, max. cutting thickness: 150 mm, dimension l: 16500 mm, dimension w: 5500 mm, dimension h: 2600 mm

with bevel cutting head 50° (5-axis nc controlled); control system “microstep” type imsnc, 1 standalone control panel, 2 digital control panels msnc ro2; cabinet with various a.o. nozzles; (plasma power unit and 2 control cabinetslocated at 1st floor) (incl. new support strips for table)
CUTTING SPEED: 420 M/MIN, TRACK WIDTH: 3900 MM, TABLE SIZE L: 12000 MM, TABLE SIZE W: 3500 MM, BRAND AND MODEL PLASMA UNIT: HYPERTHERM HPR 260XD AGC, MAX. CUTTING THICKNESS: 150 MM, DIMENSION L: 16500 MM, DIMENSION W: 5500 MM, DIMENSION H: 2600 MM WITH BEVEL CUTTING HEAD 50° (5-AXIS NC CONTROLLED); CONTROL SYSTEM “MICROSTEP” TYPE IMSNC, 1 STANDALONE CONTROL PANEL, 2 DIGITAL CONTROL PANELS MSNC RO2; CABINET WITH VARIOUS A.O. NOZZLES; (PLASMA POWER UNIT AND 2 CONTROL CABINETSLOCATED AT 1ST FLOOR) (INCL. NEW SUPPORT STRIPS FOR TABLE)
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-manufacturer: franke, type: verleimstern, press fields: 4, press pad: 6 / feld, press length mm: 2100, press depth mm: 730, cylinders per field: 6, MANUFACTURER: FRANKE, TYPE: VERLEIMSTERN, PRESS FIELDS: 4, PRESS PAD: 6 / FELD, PRESS LENGTH MM: 2100, PRESS DEPTH MM: 730, CYLINDERS PER FIELD: 6,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more IMS types: