spanish flag
venda máquinaria o mercancías excedentes
RESALE.BIZ
plaza para máquinaria usada en América
america map

ingersol rand máquina usada para la venta en RESALE.BIZ
todas las categorias

atrás back
página de inicio > palabras clave ingersol rand > resultados
6 artículos ordenados por
Número Categoría Foto Fabricante | Modelo
Tipo de maquinaria
Año Precio País Contacto
 página 1 
121866952 821  

KODAK Trendsetter 5067 Q VLF (2.8V) para la venta
CTP Systems (large format)


Trendsetter 5067 Q VLF (2.8V) year od manufcture: 2003 Laserhours 2126 Desk Top Dell Precision Tower 5810 with Windows 7 Kodak Print Console XPO software Located Colombia Available now. Machine would be dismant ...
máquina usada
 
Trendsetter 5067 Q VLF (2.8V) year od manufcture: 2003 Laserhours 2126 Desk Top Dell Precision Tower 5810 with Windows 7 Kodak Print Console XPO software Located Colombia Available now. Machine would be dismanteled and loked by Kodak Service
2003
Precio  
  CO   solicitar
121000387 103

INGERSOLL 120 x 144 x 24 ft para la venta
Horizontal Floor Type Milling And Boring Machines


120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210 This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and ...

 
120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210 This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and traverse movement. The bed has a finished pad on the left-hand side so that a bedwing and outboard support can be added to the machine when required. Capacity: Vertical distance from table to centerline of spindle 0-144" Length of table feed and traverse 24' Length of quill travel from face of head 0-24" Bed (3 ways): Width across travel ways 112" Overall length, approx. 52.5' Table: Working surface width 120" Working surface length 24' Overall length 26' • Power operated lock • Johnson Drive • T-slots & Pin holes Housing: Width across housing ways 90" Head: • Movement on housing is made through two (2) elevating screws. • Hand-operated locks • Contains a quill which carries the spindle • Spindle is driven by a 100 HP adjustable speed drive DC motor through gearing • Flywheel on spindle drive Spindle: • The spindle is equipped with a No. 450 taper, 4-12" in diameter at the large end, ¾" diameter taper per foot Quill: Spindle quill diameter 22" Power and hand adjustment 24" • Power adjustment is independent of table and head movement • Hand operated lock Spindle Speeds: Spindle speed, approx. 10-130 RPM • The spindle has three (3) ranges of speed. Medium starts at 14 RPM, and high-speed range is full capacity of the 100 hp drive motor. Feed Distribution: • The machine is arranged with two (2) 2-Motor feed boxes, one for the head feed and one for the table Feed & Traverse Rates: Feed Rapid Traverse Table ¾" – 36" per minute 20 ft. per min Head ¼" – 12" per minute 8 ft. per min • Quill is equipped with an electronic feed motor providing feed and traverse movements ranging from ¾" – 24" a minute Full Lubrication for all areas: Motors and Electrical Equipment: Qty. Description 1 Main Motor 100 hp, 5751725 RPM, 230 volts, DC, drive motor 2 Feed Motor 7-12 hp, 5752300 RPM, DC 2 Head & Table Drive Motors 40 hp, AC, foot mounted traverse motors 2 Lubricating Pump Motors ½ hp, AC, 1 Quill Adjust Motor 3 hp, 11502300 RPM, DC, 652300 FPM 1 Coolant Pump Motor 2 hp 1 Table Clamp Motor 15 ft. lb., 1800 RPM, Shell type Electrics: • 230 volts, DC • 440 volts, AC • The DC motors receive DC power from a 900 kW MG Set driven by a 150 hp motor Machine controls: • The machine is primarily controlled via a portable pendant with the following : 1. Start and stop drive motor 2. Start, stop, reverse, jog, feed, fast feed and traverse table 3. Clamp table 4. Start, stop, reverse, jog, feed, fast feed and traverse bed • The control cabinet mounted on the operators platform contains the following: -Hand operated rheostats for increasing or decreasing the feed rates -Stop and start buttons for chip conveyor, coolant pump motor and lube pump motor. Coolant Chip Conveyor Net weight - 330,000 lbs (2) Hydraulic Clamping Fixtures: • Fixtures consists of two complete clamping units, each unit including a housing, clamping rail and supporting brackets. • Adjustable Clamping Rail – to clamp various die block widths • Housing is located on the table in one of two positions; one for blocks from 14" to 27" thick, and a second for blocks 27" to 40" thick • Each fixture is equipped with pendant operated through push buttons and selector switches Capacity – the fixture is adjustable for holding the following sizes of die blocks: -Thickness – 14" – 40" -Width – 36" – 90" -Length – 58" – 21-12 ft. -Electrics – 440 volt, 3 phase, 60 cycle, AC as follows: -(1) 7-12" HP AC motor for adjusting crossrail -(1) 5 HP AC motor for driving the hydraulic pump motor -Weight – estimated weight of each fixture and its parts is 140,000 lbs -Magnetic Clamping on each fixture as follows: -Fixture 1 – Sundstrand magnetic Control, 480 v AC - 244 DC -Fixture 2 – Neutrofier II Magnetic Control, 280400 AC – 244 DC -72" x 10" Magnetic face on each fixture -Travel: -Vertical travel – 64" -Hydraulic Unit: -Vickers Note: Maximum recommended weight on table is 740,000 lbs. If one fixture is used then reduce by 140,000 lbs. If two fixtures are used then reduce by 280,000 lbs. The machine was originally designed to perform general face milling operations on die blocks. It is currently installed under power at a NorthEast USA plant where it may be inspected on request. We will sell the Clamping Units separately.
 
Precio  
  US   solicitar
96038923 106

BRUDERER BSTA 180U para la venta
High Speed Presses


One used Bruderer BSTA 180U precision high speed punching press. Year of manufacture 1999. Swiss origin. Electric drive with frequency inverter. PLC controls. 18 metric tons nominal capacity (180 kN) 8 to 40 mm vari ...
máquina usada
 
One used Bruderer BSTA 180U precision high speed punching press. Year of manufacture 1999. Swiss origin. Electric drive with frequency inverter. PLC controls. 18 metric tons nominal capacity (180 kN) 8 to 40 mm variable stroke. Speed range 100-1400 SPM max. Bolster area 480 x 374 mm. Max tool loading width 359 mm L-R. BBV 19085 roll feed mounted on right-hand side. Max width of strip 160 mm. Max feed length variable up to 85 mm max. Feed angle 180°. End of strip monitoring electronic. Digital feed length display. Power supply 480 Volt, 60 Hz. Weight of machine approx 1850 kgs. Oil cooler. Spring feet dampers. Safety guardsdoors front and rear. Complete with acoustic enclosure
1999
Precio  
  US   solicitar
25651003 109

INGERSOLL-RAND TS-140 para la venta
Compressed Air Dryers


General Characteristics entrada de aire max 60º Presión max del aire 12 Bar 14 m3 minuto Electric Characteristics Included Accessories Filtro de entrada Input filter Year 2005 Dimensions and ...

 
General Characteristics entrada de aire max 60º Presión max del aire 12 Bar 14 m3 minuto Electric Characteristics Included Accessories Filtro de entrada Input filter Year 2005 Dimensions and Weight high 1.011 mm. Long 917 mm. weight 140 Kg. width 670 mm. other Features NO Manufacture 2446350001
 
Precio  
  ES   solicitar
125017082 1900

INGERSOLL-RAND MH55 SS para la venta
Screw compressor


Weight approx.: 1200 kgDimensions (l x w x h) approx.: 2000 x 1000 x 1850 mmDescription: Serial no. 2321289, motor power 75 HP, 33000 working hours
máquina usada
 
Weight approx.: 1200 kgDimensions (l x w x h) approx.: 2000 x 1000 x 1850 mmDescription: Serial no. 2321289, motor power 75 HP, 33000 working hours
2001
used machinery auction RESALE 3,000 €  
  ES   solicitar
123862839 2000

FICEP LAPFT Grandezza 200 para la venta
Production Line


Weight approx.: 20000 kgDimensions (l x w x h) approx.: 43000 x 5500 x 5000 mmDescription: With a material density of 45 kg mm²: -cutting force up to 250 t for L-profiles from 60 x 60 x 6 mm to 200 x 200 x 16 mm, -pun ...
máquina usada
 
Weight approx.: 20000 kgDimensions (l x w x h) approx.: 43000 x 5500 x 5000 mmDescription: With a material density of 45 kg mm²: -cutting force up to 250 t for L-profiles from 60 x 60 x 6 mm to 200 x 200 x 16 mm, -punching force up to 72 t for punch hole diameter max. 30 mm, material thickness max. 16 mm
1993
Precio  
  ES   solicitar
 página 1