56 ofertas

Año de construcción: usado
Ubicación: Land-travel axes: 550 x 850 x 450 mm [ x x y x z ]
table size x: 760 mm
table size y: 1000 mm
electrode changer: 20 - time
c-axis
pinole chuck erowa its 100
control multipulse 64 bit with problackbox
work tank: : 800 x 1100 x 480 mm TRAVEL AXES: 550 X 850 X 450 MM [ X X Y X Z ] TABLE SIZE X: 760 MM TABLE SIZE Y: 1000 MM ELECTRODE CHANGER: 20 - TIME C-AXIS PINOLE CHUCK EROWA ITS 100 CONTROL MULTIPULSE 64 BIT WITH PROBLACKBOX WORK TANK: : 800 X 1100 X 480 MM
Vendedor: Mac-Tec
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 1870 x 1100 x 1100 mm<br/>description: ingersoll-rand screw compressor<br> serial number 93 m37 e 71122<br> maximum working pressure 9,8 bar<br> total power 44,5 kw<br> capacity 5,2 m3/min<br> ce standards WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 1870 X 1100 X 1100 MM
DESCRIPTION: INGERSOLL-RAND SCREW COMPRESSOR
SERIAL NUMBER 93 M37 E 71122
MAXIMUM WORKING PRESSURE 9,8 BAR
TOTAL POWER 44,5 KW
CAPACITY 5,2 M3/MIN
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks    COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 2700 kg<br/>dimensions (l x w x h) approx.: 2800 x 1350 x 1750 mm<br/>description: ingersoll-rand screw compressor<br> serial number 2360483<br> maximum working pressure 8,5 bar<br> total power 104 kw - 1485 rpm<br> capacity 15,3 m3/min<br> ce standards WEIGHT APPROX.: 2700 KG
DIMENSIONS (L X W X H) APPROX.: 2800 X 1350 X 1750 MM
DESCRIPTION: INGERSOLL-RAND SCREW COMPRESSOR
SERIAL NUMBER 2360483
MAXIMUM WORKING PRESSURE 8,5 BAR
TOTAL POWER 104 KW - 1485 RPM
CAPACITY 15,3 M3/MIN
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-jig - ingersoll gantry500 in top condition
technically and visually in a very good condition
-fully functional, well-maintained facility, with lots of accessories
-masch.nr.: 573...
-year of production 1998
-generator 70 amps - multi pulse
-- 32-bit cnc control
-traverse paths: x = 525 x 400 x = y z = 375 mm
-elektrodenwechsler-20 x magazine changer - disc changer
-working capacity: b = 750 x t = 650 x h = 420 mm
-auflageflã¤che-work table: b = 730 x d = 630 mm
-load table: 1000 kg
-dielectric supply: integr. cartridge filter system
-co2 fire-extinguishing
-certified plant next check 11/19 / next battery change 12/21
-with extraction system
-with lots of accessories
-software multiprog version 4.1.4.0.
-with hardware
-price on request  JIG - INGERSOLL GANTRY500 IN TOP CONDITION TECHNICALLY AND VISUALLY IN A VERY GOOD CONDITION -FULLY FUNCTIONAL, WELL-MAINTAINED FACILITY, WITH LOTS OF ACCESSORIES -MASCH.NR.: 573... -YEAR OF PRODUCTION 1998 -GENERATOR 70 AMPS - MULTI PULSE -- 32-BIT CNC CONTROL -TRAVERSE PATHS: X = 525 X 400 X = Y Z = 375 MM -ELEKTRODENWECHSLER-20 X MAGAZINE CHANGER - DISC CHANGER -WORKING CAPACITY: B = 750 X T = 650 X H = 420 MM -AUFLAGEFL&ATILDE;&CURREN;CHE-WORK TABLE: B = 730 X D = 630 MM -LOAD TABLE: 1000 KG -DIELECTRIC SUPPLY: INTEGR. CARTRIDGE FILTER SYSTEM -CO2 FIRE-EXTINGUISHING -CERTIFIED PLANT NEXT CHECK 11/19 / NEXT BATTERY CHANGE 12/21 -WITH EXTRACTION SYSTEM -WITH LOTS OF ACCESSORIES -SOFTWARE MULTIPROG VERSION 4.1.4.0. -WITH HARDWARE -PRICE ON REQUEST
Vendedor: USTA-Graphische Maschinen Service & Handel
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 300 kg<br/>dimensions (l x w x h) approx.: 1420 x 1240 x 750 mm<br/>description: - serial no.: 2121995<br> - max. discharge pressure: 10 bar<br> - power consumption of compressor: 5,5 kw<br> - speed: 2880 rpm<br> - voltage: 400 v, 50 hz<br> - read off operating hours: 10887 WEIGHT APPROX.: 300 KG
DIMENSIONS (L X W X H) APPROX.: 1420 X 1240 X 750 MM
DESCRIPTION: - SERIAL NO.: 2121995
- MAX. DISCHARGE PRESSURE: 10 BAR
- POWER CONSUMPTION OF COMPRESSOR: 5,5 KW
- SPEED: 2880 RPM
- VOLTAGE: 400 V, 50 HZ
- READ OFF OPERATING HOURS: 10887
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
procedures:
[x x y x z] 650 x 550 x 500 mm
 
number of axles: 3 control: andron win xp spindle recording: hsk a 63 spindle speed: 24000 rpm
table size x 850 mm
table size y: 700 mm
tool changers: 23 - x PROCEDURES: [X X Y X Z] 650 X 550 X 500 MM NUMBER OF AXLES: 3 CONTROL: ANDRON WIN XP SPINDLE RECORDING: HSK A 63 SPINDLE SPEED: 24000 RPM TABLE SIZE X 850 MM TABLE SIZE Y: 700 MM TOOL CHANGERS: 23 - X
Vendedor: Mac-Tec
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 12 kg<br/>dimensions (l x w x h) approx.: 400 x 300 x 50 mm<br/>description: - in different versions<br> - partly new and partly used<br> - approx. 35 small packets WEIGHT APPROX.: 12 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 300 X 50 MM
DESCRIPTION: - IN DIFFERENT VERSIONS
- PARTLY NEW AND PARTLY USED
- APPROX. 35 SMALL PACKETS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-screw compressor - ingersoll rand ssr ml 15
motor power 15 kw (20 hp)
output pressure 7,5 bar SCREW COMPRESSOR - INGERSOLL RAND SSR ML 15 MOTOR POWER 15 KW (20 HP) OUTPUT PRESSURE 7,5 BAR
Vendedor: Artuso Trading & Tech s.r.l.
Año de construcción: usado
Precio: used machinery auction RESALE 40 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 300 x 140 x 140 mm<br/>description: - presumable for testing of roundness WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 140 X 140 MM
DESCRIPTION: - PRESUMABLE FOR TESTING OF ROUNDNESS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ingersoll rand compressor 
brand ingersoll rand 
model up5 - 7 - 10 
year 2007
ingersoll rand datasheet
model: up5 - 7 - 10
max. pressure: 10 bar
kw: 8.2
rpm/min: 2900
volts: 400
phase/hz: 3/50
weight: 295 kg 
for more information contact us at 030 725026 or visit our website.
from monday to friday from 8:30 to 13:00 and from 14:00 to 19:00.

price on request INGERSOLL RAND COMPRESSOR BRAND INGERSOLL RAND MODEL UP5 - 7 - 10 YEAR 2007 INGERSOLL RAND DATASHEET MODEL: UP5 - 7 - 10 MAX. PRESSURE: 10 BAR KW: 8.2 RPM/MIN: 2900 VOLTS: 400 PHASE/HZ: 3/50 WEIGHT: 295 KG FOR MORE INFORMATION CONTACT US AT 030 725026 OR VISIT OUR WEBSITE. FROM MONDAY TO FRIDAY FROM 8:30 TO 13:00 AND FROM 14:00 TO 19:00. PRICE ON REQUEST
Vendedor: Remarketin Way s.r.l,
Año de construcción: usado
Precio: used machinery auction RESALE 1.300 €
Ubicación: Land-weight approx.: 1375 kg<br/>dimensions (l x w x h) approx.: 2300 x 1000 x 1900 mm<br/>description: motor power: 75 hp. pressure: 10 bar.<br> ref. : z143002 WEIGHT APPROX.: 1375 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 1000 X 1900 MM
DESCRIPTION: MOTOR POWER: 75 HP. PRESSURE: 10 BAR.
REF. : Z143002
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 7.800 €
Ubicación: Land-jig ingersoll ig750 bj1992; travel 500 x 700 x 350 with 6-fold electrode changer for erowa its copper + graphite electrodes. JIG INGERSOLL IG750 BJ1992; TRAVEL 500 X 700 X 350 WITH 6-FOLD ELECTRODE CHANGER FOR EROWA ITS COPPER + GRAPHITE ELECTRODES.
Vendedor: alesco GmbH
Año de construcción: usado
Precio: 55 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-make: ingersoll
model: rand centac air compressor
year: 2003
condition: used
machine type: other 
location of machine: uk 
condition info: good working order

machine details
ingersoll rand centac (c50mx4)


v-507136/1-2

2003

1050kw


5000 cfm MAKE: INGERSOLL MODEL: RAND CENTAC AIR COMPRESSOR YEAR: 2003 CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: UK CONDITION INFO: GOOD WORKING ORDER MACHINE DETAILS INGERSOLL RAND CENTAC (C50MX4) V-507136/1-2 2003 1050KW 5000 CFM
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-table-size: unbkt. mm<br/>workpiece height: unbkt. mm<br/>three-axis-real value indicator:  0<br/><br/><br/><br/><br/> TABLE-SIZE: UNBKT. MM
WORKPIECE HEIGHT: UNBKT. MM
THREE-AXIS-REAL VALUE INDICATOR: 0




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-2-cylinder mitsubishi, weight: approx. 1250 kg, in need of repair 2-CYLINDER MITSUBISHI, WEIGHT: APPROX. 1250 KG, IN NEED OF REPAIR
Vendedor: ENDERS Produktion GmbH
Año de construcción: usado
Ubicación: Land-table length: 630 mm<br/>table width: 750 mm<br/>ampere: 70 a<br/>travel x / y / z: 525 x 650 x 420 mm<br/>weight of the machine ca.: 4,8 t<br/>dimensions of the machine ca.: 2,20 x 2.150 x 2.450 m<br/><br/><br/><br/><br/> TABLE LENGTH: 630 MM
TABLE WIDTH: 750 MM
AMPERE: 70 A
TRAVEL X / Y / Z: 525 X 650 X 420 MM
WEIGHT OF THE MACHINE CA.: 4,8 T
DIMENSIONS OF THE MACHINE CA.: 2,20 X 2.150 X 2.450 M




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land-20 x dornier airjets, year 1997/ 1998 / 1999
 

type: lwv4 / s

nominal width: 2100 mm

dobby: electronic dobby staubli type 2580 rs for max. 16 frames

accessories per machine:

4 x weft accumulators

6 x heald frames

1,5 x warp beams

1,5 x cloth rolls

 

also included 1 x compressor ingersoll rand compressor installation suitable for up to 30 looms

  20 X DORNIER AIRJETS, YEAR 1997/ 1998 / 1999 TYPE: LWV4 / S NOMINAL WIDTH: 2100 MM DOBBY: ELECTRONIC DOBBY STAUBLI TYPE 2580 RS FOR MAX. 16 FRAMES ACCESSORIES PER MACHINE: 4 X WEFT ACCUMULATORS 6 X HEALD FRAMES 1,5 X WARP BEAMS 1,5 X CLOTH ROLLS ALSO INCLUDED 1 X COMPRESSOR INGERSOLL RAND COMPRESSOR INSTALLATION SUITABLE FOR UP TO 30 LOOMS
Vendedor: American Traders
Año de construcción: usado
Ubicación: Land-x-travel: 17900 mm<br/>y-travel: 2900 mm<br/>z-travel: 2900 mm<br/>clamping surface table 1: 10400 x 2540 mm<br/>clamping surface table 2: 6000 x 2540 mm<br/>clamping surface table 1+2 , coupled: 17000 x 2540 mm<br/>distance table - lower edge spindle: 3048 mm<br/>column daylight: 2945 mm<br/>spindle motor: 2 x 86/70 kw<br/>table load: 80 t<br/>diameter of quill: 305 mm<br/>quill stroke: 380 mm<br/>spindle taper metric: 100 <br/>total power requirement: 370 kw<br/>weight of the machine ca.: 260 t<br/>dimensions of the machine ca.: 36,6 x 10,5 x 8,1 m<br/>- electrics modernized in 2001 (incl. new drive controllers)<br/>- 2 milling heads on crossrail<br/>- 2 side milling heads<br/>- crossrail with vertical adjustment<br/>- angular milling heads<br/>- x-axis drive by worm and worm-rack system<br/><br/><br/><br/><br/><br/> X-TRAVEL: 17900 MM
Y-TRAVEL: 2900 MM
Z-TRAVEL: 2900 MM
CLAMPING SURFACE TABLE 1: 10400 X 2540 MM
CLAMPING SURFACE TABLE 2: 6000 X 2540 MM
CLAMPING SURFACE TABLE 1+2 , COUPLED: 17000 X 2540 MM
DISTANCE TABLE - LOWER EDGE SPINDLE: 3048 MM
COLUMN DAYLIGHT: 2945 MM
SPINDLE MOTOR: 2 X 86/70 KW
TABLE LOAD: 80 T
DIAMETER OF QUILL: 305 MM
QUILL STROKE: 380 MM
SPINDLE TAPER METRIC: 100
TOTAL POWER REQUIREMENT: 370 KW
WEIGHT OF THE MACHINE CA.: 260 T
DIMENSIONS OF THE MACHINE CA.: 36,6 X 10,5 X 8,1 M
- ELECTRICS MODERNIZED IN 2001 (INCL. NEW DRIVE CONTROLLERS)
- 2 MILLING HEADS ON CROSSRAIL
- 2 SIDE MILLING HEADS
- CROSSRAIL WITH VERTICAL ADJUSTMENT
- ANGULAR MILLING HEADS
- X-AXIS DRIVE BY WORM AND WORM-RACK SYSTEM





Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Ubicación: Land-air compressor AIR COMPRESSOR
Vendedor: occasionmachines
Año de construcción: usado
Ubicación: Land-x-travel: 16500 mm<br/>y-travel: 6000 mm<br/>z-travel: 600 mm<br/>w-axis: 2915 mm<br/>surface area: 16460 x 4875 mm<br/>table load: 200 t<br/>distance between columns: 5590 mm<br/>distance table - lower edge spindle: 45 - 3580 mm<br/>spindle diameter: 152 mm<br/>spindle motor: 30 kw<br/>spindle taper iso: 50 <br/>spindle turning speed range: 25 - 600 u/min<br/>feed in x - axis: 6,3 m/min<br/>feed in y - axis: 3 m/min<br/>control: siemens 840c <br/>total power requirement:  kw<br/>weight of the machine ca.: 300 t<br/>dimensions of the machine ca.: 30 x 10 x 9 m<br/>- 1995 retrofitted with cnc control siemens 840 c<br/>- universal milling heads<br/>- 2 milling heads on crossrail with ram-section 420 x 420 mm<br/>- crossrail movement by ac motor and with hydr. clamping<br/>- measuring system for x- and y-axis via rack/shaft<br/>- column movement by double rack/pinion<br/>- floor plate<br/><br/><br/><br/><br/><br/><br/> X-TRAVEL: 16500 MM
Y-TRAVEL: 6000 MM
Z-TRAVEL: 600 MM
W-AXIS: 2915 MM
SURFACE AREA: 16460 X 4875 MM
TABLE LOAD: 200 T
DISTANCE BETWEEN COLUMNS: 5590 MM
DISTANCE TABLE - LOWER EDGE SPINDLE: 45 - 3580 MM
SPINDLE DIAMETER: 152 MM
SPINDLE MOTOR: 30 KW
SPINDLE TAPER ISO: 50
SPINDLE TURNING SPEED RANGE: 25 - 600 U/MIN
FEED IN X - AXIS: 6,3 M/MIN
FEED IN Y - AXIS: 3 M/MIN
CONTROL: SIEMENS 840C
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 300 T
DIMENSIONS OF THE MACHINE CA.: 30 X 10 X 9 M
- 1995 RETROFITTED WITH CNC CONTROL SIEMENS 840 C
- UNIVERSAL MILLING HEADS
- 2 MILLING HEADS ON CROSSRAIL WITH RAM-SECTION 420 X 420 MM
- CROSSRAIL MOVEMENT BY AC MOTOR AND WITH HYDR. CLAMPING
- MEASURING SYSTEM FOR X- AND Y-AXIS VIA RACK/SHAFT
- COLUMN MOVEMENT BY DOUBLE RACK/PINION
- FLOOR PLATE






Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Ubicación: Land-year 2010 control eagle pc-nc-dialog2 x 32 bit
-high speed jumpmax.  18.000 mm / min.
-speed x, y, z max 5,000 mm / min.
-multiprog powertec technological logieren programming on pc/nc
-powertec easy burn quick programming manual control unit
-manual edm with powertec-handheld
-interfaces ethernet and usb generator power eagle, 60 amp travel (x, y, z) 550 x 850 x 450 mm bowl (w x d x h) 800 x 1100 x 480 mm
lifting containers work table (b x t) 760 x 1000 mm capacity 2,000 kg electrode changer 20-fold pick-up plate magazine accessories: co2 fire-extinguishing, integr. cartridge filter system-16 mâ² status: completely overhauled during the overhaul of machine images
 YEAR 2010 CONTROL EAGLE PC-NC-DIALOG2 X 32 BIT -HIGH SPEED JUMPMAX. 18.000 MM / MIN. -SPEED X, Y, Z MAX 5,000 MM / MIN. -MULTIPROG POWERTEC TECHNOLOGICAL LOGIEREN PROGRAMMING ON PC/NC -POWERTEC EASY BURN QUICK PROGRAMMING MANUAL CONTROL UNIT -MANUAL EDM WITH POWERTEC-HANDHELD -INTERFACES ETHERNET AND USB GENERATOR POWER EAGLE, 60 AMP TRAVEL (X, Y, Z) 550 X 850 X 450 MM BOWL (W X D X H) 800 X 1100 X 480 MM LIFTING CONTAINERS WORK TABLE (B X T) 760 X 1000 MM CAPACITY 2,000 KG ELECTRODE CHANGER 20-FOLD PICK-UP PLATE MAGAZINE ACCESSORIES: CO2 FIRE-EXTINGUISHING, INTEGR. CARTRIDGE FILTER SYSTEM-16 M&ACIRC;&SUP2; STATUS: COMPLETELY OVERHAULED DURING THE OVERHAUL OF MACHINE IMAGES
Vendedor: MS-Schöllchen Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 4000 mm<br/>y-travel: 3000 mm<br/>z-travel: 1200 mm<br/>c-axis: 360 °<br/>b-axis: 360 °<br/>table load: 35 t<br/>spindle taper: iso 50 <br/>spindle turning speed range: 10 - 4000 u/min<br/>spindle motor: 37/50 kw<br/>feeds longditudinal/cross/vertical: 1 - 10000 mm/min<br/>rapid travel x/y/z: 15000 mm/min<br/>spindle diameter in front bearing: 140 mm<br/>distance table - lower edge spindle: 1200 mm<br/>surface area: 3500 x 1800 mm<br/>distance between columns: 2300 mm<br/>max. torque on the spindle: 2650 nm<br/>control: fidia m20 <br/>max. torque on the spindle: 2650 nm<br/>total power requirement: 100 kw<br/>weight of the machine ca.: 70 t<br/>dimensions of the machine ca.: 10,9 x 7,2 x 5,8 m<br/>- machine with cnc control for 5-axis simultanous operation fidia m20<br/>- head changer for nutator head 2-axis nc, spindle extension<br/>- spindle box with 3 gear steps<br/>- tool changer for 40 tools<br/>- coolant through spindle 20 bar<br/>- hydrostatic table guideways with worm drive<br/>- double chip convejor with coolant device<br/>- oil and liquid cooler<br/><br/><br/><br/><br/><br/> X-TRAVEL: 4000 MM
Y-TRAVEL: 3000 MM
Z-TRAVEL: 1200 MM
C-AXIS: 360 °
B-AXIS: 360 °
TABLE LOAD: 35 T
SPINDLE TAPER: ISO 50
SPINDLE TURNING SPEED RANGE: 10 - 4000 U/MIN
SPINDLE MOTOR: 37/50 KW
FEEDS LONGDITUDINAL/CROSS/VERTICAL: 1 - 10000 MM/MIN
RAPID TRAVEL X/Y/Z: 15000 MM/MIN
SPINDLE DIAMETER IN FRONT BEARING: 140 MM
DISTANCE TABLE - LOWER EDGE SPINDLE: 1200 MM
SURFACE AREA: 3500 X 1800 MM
DISTANCE BETWEEN COLUMNS: 2300 MM
MAX. TORQUE ON THE SPINDLE: 2650 NM
CONTROL: FIDIA M20
MAX. TORQUE ON THE SPINDLE: 2650 NM
TOTAL POWER REQUIREMENT: 100 KW
WEIGHT OF THE MACHINE CA.: 70 T
DIMENSIONS OF THE MACHINE CA.: 10,9 X 7,2 X 5,8 M
- MACHINE WITH CNC CONTROL FOR 5-AXIS SIMULTANOUS OPERATION FIDIA M20
- HEAD CHANGER FOR NUTATOR HEAD 2-AXIS NC, SPINDLE EXTENSION
- SPINDLE BOX WITH 3 GEAR STEPS
- TOOL CHANGER FOR 40 TOOLS
- COOLANT THROUGH SPINDLE 20 BAR
- HYDROSTATIC TABLE GUIDEWAYS WITH WORM DRIVE
- DOUBLE CHIP CONVEJOR WITH COOLANT DEVICE
- OIL AND LIQUID COOLER





Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Ubicación: Land-
major textile knitting  plant liquidation 
(please your intrest with confirmed target price immedaitely)

 
 
knitting
12
monarch fil 8aeq, 30 MAJOR TEXTILE KNITTING PLANT LIQUIDATION (PLEASE YOUR INTREST WITH CONFIRMED TARGET PRICE IMMEDAITELY) KNITTING 12 MONARCH FIL 8AEQ, 30", 4-18 CUT, 8-24 CUT, 84 FEED 2 MONARCH FIL 8AEQ, 30", 18 CUT, 84 FEED, 50 % LYCRA 10 MONARCH FIM 108A, 30", 24 CUT, 108 FEED 1 MONARCH FDR RIB, 26", 14 CUT, 52 FEED 3 MONARCH RIB, 26", 14 CUT, 52 FEED, LYCRA 1 MONARCH RIB, 20", 14 CUT, 40 FEED 1 MONARCH SEC ELECTRONIC STRIPER, 30", 16 CUT, 36 FEED 6 MONARCH FXC4S, 30', 20 CUT, 122 FEED 4 MONARCH RACE, 30", 28 CUT, 122 CUT 1 MONARCH STEP JACK, 30", 20 CUT, 72 FEED 14 MONARCH RXDF, 30", 122 FEED, 3-24 CUT, 6-22 CUT, 5-18 CUT, 24 MONARCH RX4S, 26", 104 FD, 2-28 CUT, 4-24 CUT, 9-18 CUT, 9-22 CUT, 7 MONARCH FXC 4S, 26", 20 CUT, 104 FD. 6 MONARCH RX4S, 26", 20 CUT, 104 FD. 8 MONARCH RX WSY STRIPER, 30", 48 FEED, 5-16 CUT, 1-18 CUT, 1-28 CUT FLAT KNITTING 2 PROTTI PV94 DOUBLELOCK, 240 CM, 12 GAUGE 6 PROTTI PT222, 213 CM, 12 CUT 9 PROTTI PT242 JACQUARD, 218 CM, 12 CUT 35 STOLL JBOMB, 150 CM, 160 CM & 180 CM, 12 GAUGE DYEING 1 GASTON JET DYE, 80 LB., 1996, M6000 CONTROLLER 4 SCLAVOS JET DYE, VENUS HT3, 3 PORT, 1000 LBS., 50 PSI, 1999, UPDATED RECORE CONTROLS, 2014-15 3 GASTON FUTURA, 2 PORT, 1000 LBS., 53 PSI, BARCO CONTROLS, 1987 1 GASTON FUTURA JET DYE, SINGLE TUBE, 160 LBS,, 1992, M3000 CONTROLLER 4 RECORE DYE MACHINE CONTROLLERS, 2012-14 6 THEN AIRFLOW, 1200 LBS., 3 STRAND/3 PORTS, 1988 1 THEN AIRFLOW, 400 LBS., 1 PORT, 1987 3 ARGANTHAN JET DYE, 80 LBS. EACH, 60 PSI, 1982-80 1 ARGANTHAN JET DYE, 400 LBS., 60 PSI, 1982 11 ARGANTHAN JET DYE, 4 PORTS, 1000 LBS., 60 PSI, 1980 7 GASTON 824 JET DYE, 5-3 PORT, 2-2 PORT 200 STAINLESS MIXING TANKS WITH MIXERS, 50 TO 250 GAL. 200 DYEHOUSE TRUCKS, 72" X 42" WIDE X 35" DP. FINISHING 1 SANTEX SANTASTRECH PLUS 120, 48" WIDE, 120 CM, BALLOON EXTRACTOR, 5 TO 60 YPM, 1994 1 SANTEX SANTASHRINK DRYER, 220 CM WIDE, WITH PIN TENTER ENTRY, 1994, 6K/220 GAS IR SRS + SPR+FOUL+CUT, GAS FIRED, 6 CHAMBERS, 2400 LBS./HOUR EVAPORATION CAPACITY, 6.1 MIL BTU/HR 1 TUBETEX DRYER #6 GAS FIRED DRUM, ENTRY WITH 3- FABCON PADDERS 1 BIANCO SLITTER, 86" WIDE, BIANCO SLITTER HEAD (UPDATED 2015), ROPE SQUEEZE, DETWISTER, FOLDER, STAINLESS STEEL 1 BIANCO SLITTER, 86" WIDE, OPENER AND DETWISTER, 2 SCROLLED ROLLS, FLAT FOLDER 1 STENTEX TENTER STENTOTHERM 3300, 1995, 2400 MM MAX. WORKING WIDTH, UNWIND, J BOX, DOGAL UNCURLER, 2 SANTEX PADDERS, 102" WIDE, BIANCO WEFT STRAIGHTNER, E & L GUIDERS, LOW PROFILE GAS FIRED 12 ZONES, 1 KRANTZ SYNCRO SHRINK CONVEYOR DRYER, 100" WIDE BELT 2 FAMATEX TENTER #1 & #2 3 TUBE TEX DRUM DRYERS, 48" WIDE & 72" WIDE 1 FABCON DRUM DRYER, 8 ZONE 5 TUBULAR INSPECTION MACHINES 6 6 FABCON TUBULAR GULLWING TUBULAR COMPACTORS, 52" WIDE FABCON & TUBETEX TUBULAR CALENDARS, 50" & 60" WIDE 1 ARGATHEN BLEACH RANGE, 10 SECTION, 2200 LBS. HOUR. 1 JEMCO BLEACH RANGE, MODEL III 2000 CBR, 2,000 LBS. HOUR, 1995 1 CURTIS & MARBLE, PLASTIC ROLL WRAPPING 1 BESPOKE DYE MIXING SYSTEM, YEAR 2000, 16 PUMPS, 2 MODEL SRD EXACT WEIGH LIQUID CHEMICAL COLLECTING, MIXING, BATCH WEIGHING, 2 IR DUAL HEAD CENTRIFUGAL PUMP, METTLER INTERGRATED SCALE 1 TUBE TEX, DRUM DRYER 1999, WITH 3 TUBE TEX TUBULAR PADDERS 1 1 MONFORTS KNITGOODS TOPTEX 92" WIDE, OPEN WIDTH RUBBER BELT COMPACTOR, KOMBI BATCHER, STEAM HEATED MAIN CYLINDER, 1990 FABCON OPEN PIN TENTER, 90" WIDE X 20' LONG, STEAMING SECTION, BATCHER 1 LABORATORY: RAITECH QUICKWASH, DATACOLOR 500, MILNOR WASHER, HUEBSCH DRYER 50 LB., PLUS MANY MORE ITEMS 25 MERROW SEWING MACHINES, WITH TABLE AND MOTOR 2 GARDNER DENVER AIR COMPRESSOR, 60 HP 1 GARDNER DENVER AIR COMPRESSOR, 200 HP 3 INGERSOLL-RAND SCREW COMPRESSOR, 2- 250 HP, 1-150 HP 3 PROPANE STORAGE TANKS, 30,000 GALLON, WITH MIXER 4 STAINLESS STEEL OUTSIDE TANKS, 6000 GAL TO 10,000 GAL. 3 WASTE BALERS, VERTICAL STYLE 2 CLEAVER BROOKS PACKAGE BOILERS, 800 HP, 1988 + 1989, DEARATOR SYSTEM PLEASE CONTACT US FOR FURTHER INFORMATION .
Vendedor: American Traders
Año de construcción: usado
Ubicación: Land-1 electrical torque wrench with controler for variable speed adjustment and balancer<br>torque range: 1.7 to 10.4 in.-lb. / 2.0 to 12 kgf.cm<br>500-700 rpm<br> <br>in total are 10 torque wrenches available with controler and 9 balancer. models available are:<br> <br>ingersoll rand el1007bc-esd 24v with controler ec24e-esd - 5 pieces<br>ingersoll rand el1512s with controler ec34es-2 - 2 controlers with 4 screwdrivers<br>doga d0250 esd with controler doga xs-38d - 1 piece.<br> <br> 1 ELECTRICAL TORQUE WRENCH WITH CONTROLER FOR VARIABLE SPEED ADJUSTMENT AND BALANCER
TORQUE RANGE: 1.7 TO 10.4 IN.-LB. / 2.0 TO 12 KGF.CM
500-700 RPM

IN TOTAL ARE 10 TORQUE WRENCHES AVAILABLE WITH CONTROLER AND 9 BALANCER. MODELS AVAILABLE ARE:

INGERSOLL RAND EL1007BC-ESD 24V WITH CONTROLER EC24E-ESD - 5 PIECES
INGERSOLL RAND EL1512S WITH CONTROLER EC34ES-2 - 2 CONTROLERS WITH 4 SCREWDRIVERS
DOGA D0250 ESD WITH CONTROLER DOGA XS-38D - 1 PIECE.

Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Precio: 400 €
Ubicación: Land-we offer:<br/>  <br/>  temperature control device wittmann tempro basic/c 415/240 v 3 ~ 7 kw<br/>  <br/>  info from the net:<br/>  single circuit temperature control unit (90 ° c). indirect cooling with same heat exchanger as well as same submersible pump with high capacity as at the tempro primus-c; 90. by default with leak stop operation and switch to the suction during die changes.<br/>  <br/>  the device was acquired in the context of the acquisition of an insolvent company. it is not in use and stored<br/>  <br/>  manufacturer: wittmann robot systems gmbh nuremberg<br/>  series: tempro-primus/c; 90<br/>  type: t4a3a1s00_01_00<br/>  year of construction: 100/2008<br/>  no. tp00000190<br/>  connection: 3 x 415v 11a 7kw<br/>  dimensions: h = approx. 670 mm, t = 500 mm, b = 260 mm<br/>  <br/>  condition: used unchecked<br/>  <br/>  the plant is located currently at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer for the transportation of the specified site of the purchased machine responsible.<br/>  <br/>  -3 pieces temperature control device digicolor thermonorm x-2000 3 ~ 400v escorts 7 kw<br/>  -air circulation dryer arburg thermolift 100 380v 5, 35 kw<br/>  -chiller of air cooled chillers climaserv gfc f 260 st 260 kw refrigeration capacity<br/>  -jig ingersoll gantry 500<br/>  -compressed air diaphragm pump type pump depa dl 50 with print gap control<br/>  -conditioning bath tt-100 kb-u tool-temp ag ch 3 ~ 380v 12 kw<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -150 x u steel profile (3 packets) 15x30x15x2, 5 x ca. 3000mm...<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15kw<br/>  -geyer h<br/> [...] WE OFFER:

TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO BASIC/C 415/240 V 3 ~ 7 KW

INFO FROM THE NET:
SINGLE CIRCUIT TEMPERATURE CONTROL UNIT (90 ° C). INDIRECT COOLING WITH SAME HEAT EXCHANGER AS WELL AS SAME SUBMERSIBLE PUMP WITH HIGH CAPACITY AS AT THE TEMPRO PRIMUS-C; 90. BY DEFAULT WITH LEAK STOP OPERATION AND SWITCH TO THE SUCTION DURING DIE CHANGES.

THE DEVICE WAS ACQUIRED IN THE CONTEXT OF THE ACQUISITION OF AN INSOLVENT COMPANY. IT IS NOT IN USE AND STORED

MANUFACTURER: WITTMANN ROBOT SYSTEMS GMBH NUREMBERG
SERIES: TEMPRO-PRIMUS/C; 90
TYPE: T4A3A1S00_01_00
YEAR OF CONSTRUCTION: 100/2008
NO. TP00000190
CONNECTION: 3 X 415V 11A 7KW
DIMENSIONS: H = APPROX. 670 MM, T = 500 MM, B = 260 MM

CONDITION: USED UNCHECKED

THE PLANT IS LOCATED CURRENTLY AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE RESPONSIBLE.

-3 PIECES TEMPERATURE CONTROL DEVICE DIGICOLOR THERMONORM X-2000 3 ~ 400V ESCORTS 7 KW
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380V 5, 35 KW
-CHILLER OF AIR COOLED CHILLERS CLIMASERV GFC F 260 ST 260 KW REFRIGERATION CAPACITY
-JIG INGERSOLL GANTRY 500
-COMPRESSED AIR DIAPHRAGM PUMP TYPE PUMP DEPA DL 50 WITH PRINT GAP CONTROL
-CONDITIONING BATH TT-100 KB-U TOOL-TEMP AG CH 3 ~ 380V 12 KW
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-150 X U STEEL PROFILE (3 PACKETS) 15X30X15X2, 5 X CA. 3000MM...
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15KW
-GEYER H
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-x-travel: 5600 mm<br/>y-travel: 3617 mm<br/>z-travel: 828 mm<br/>control: siemens 840 c <br/>rapide traverse: 12000 mm/min<br/>max. torque on the spindle: 1750 nm <br/>tool taper: sk 50 <br/>turning speeds: max. 2500 u/min<br/>gear box: 3 x <br/>distance between columns: 2650 mm<br/>screw conveyor self-made<br/><br/>4 - axis portal processing center with 5-sided machining, pallet changer and <br/>tool<br/>arena with kuka robot sk50 with storage space for 270 tools<br/><br/>automatic head change<br/><br/>max./min. distance at angle head spindle center> table - with pallet: max. 979<br/>mm / min. 151 mm, without pallet: max. 1.231 mm / min. 403 mm<br/><br/>max./min. distance vertical head spindle nose> table - with pallet: max. 1080<br/>mm / min. 252 mm, without pallet: max. 1.330 mm / min. 502 mm<br/><br/>table size / pallet size length / width / height - 2 pallets of 5,000 x 2,000 x<br/>200 mm 3d system<br/>without pallet - 2 tables with 2,000 x 1,250 mm, distance 700 mm with t-slots<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> X-TRAVEL: 5600 MM
Y-TRAVEL: 3617 MM
Z-TRAVEL: 828 MM
CONTROL: SIEMENS 840 C
RAPIDE TRAVERSE: 12000 MM/MIN
MAX. TORQUE ON THE SPINDLE: 1750 NM
TOOL TAPER: SK 50
TURNING SPEEDS: MAX. 2500 U/MIN
GEAR BOX: 3 X
DISTANCE BETWEEN COLUMNS: 2650 MM
SCREW CONVEYOR SELF-MADE

4 - AXIS PORTAL PROCESSING CENTER WITH 5-SIDED MACHINING, PALLET CHANGER AND
TOOL
ARENA WITH KUKA ROBOT SK50 WITH STORAGE SPACE FOR 270 TOOLS

AUTOMATIC HEAD CHANGE

MAX./MIN. DISTANCE AT ANGLE HEAD SPINDLE CENTER> TABLE - WITH PALLET: MAX. 979
MM / MIN. 151 MM, WITHOUT PALLET: MAX. 1.231 MM / MIN. 403 MM

MAX./MIN. DISTANCE VERTICAL HEAD SPINDLE NOSE> TABLE - WITH PALLET: MAX. 1080
MM / MIN. 252 MM, WITHOUT PALLET: MAX. 1.330 MM / MIN. 502 MM

TABLE SIZE / PALLET SIZE LENGTH / WIDTH / HEIGHT - 2 PALLETS OF 5,000 X 2,000 X
200 MM 3D SYSTEM
WITHOUT PALLET - 2 TABLES WITH 2,000 X 1,250 MM, DISTANCE 700 MM WITH T-SLOTS



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-we offer:<br/>  <br/>  conveyor belt conveyor 210 x 30 x 40 / 90 cm 24 m / min adjustable on 1 stand band is operational.<br/>  <br/>  manufacturer: wini<br/>  type: unknown<br/>  martin no.<br/>  year of built: unknown<br/>  band dimensions: 200 x 30 cm ribs every 40cm<br/>  mass system: 200 x 50 cm<br/>  height: 40-90 cm<br/>  angle: adjustable<br/>  belt speed: 24 m / min<br/>  mobile: no only movable<br/>  connection: 400v 50 hz<br/>  gear motor: lenze 180 w<br/>  weight 150 kg<br/>  <br/>  state. used see photos, ready to be used, as is,<br/>  <br/>  next conveyor belts on sale.<br/>  <br/>  the conveyor is currently still at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer is responsible for the transportation of the specified site of the purchased machine.<br/>  <br/>  furthermore we offer:<br/>  <br/>  -belt conveyor belt conveyor 1250 x 370 mm of drehzahlsteueung with hot air blower hotwind 3400 w<br/>  -conveyor belt conveyors mtf nl ie 010 255x30x100cm clocked...<br/>  -conveyor belt conveyors salama 1000/400 l mobile 230v 120w<br/>  -conveyor belt conveyors mtf gl ie 010 200x26x110cm clocked...<br/>  -jig ingersoll gantry 500 + control & cooling<br/>  -bagger autobag hs 100 excel<br/>  -temperature control device digicolor thermonorm x-2000 3 ~ 400v escorts 7 kw<br/>  -ring spanner set stahlwille/garant 41.36 34, 32, 30, 27 mm<br/>  -150 x steel 15 x 30 x 15 x 2.5 x u profile (3 packets) ca. 3000 mm...<br/>  -air circulation dryer arburg thermolift 100 380 v 5, 35 kw<br/>  -conditioning bath tt-100 kb-u tool-temp ag ch 3 ~ 380v 12 kw<br/>  -lackie WE OFFER:

CONVEYOR BELT CONVEYOR 210 X 30 X 40 / 90 CM 24 M / MIN ADJUSTABLE ON 1 STAND BAND IS OPERATIONAL.

MANUFACTURER: WINI
TYPE: UNKNOWN
MARTIN NO.
YEAR OF BUILT: UNKNOWN
BAND DIMENSIONS: 200 X 30 CM RIBS EVERY 40CM
MASS SYSTEM: 200 X 50 CM
HEIGHT: 40-90 CM
ANGLE: ADJUSTABLE
BELT SPEED: 24 M / MIN
MOBILE: NO ONLY MOVABLE
CONNECTION: 400V 50 HZ
GEAR MOTOR: LENZE 180 W
WEIGHT 150 KG

STATE. USED SEE PHOTOS, READY TO BE USED, AS IS,

NEXT CONVEYOR BELTS ON SALE.

THE CONVEYOR IS CURRENTLY STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

FURTHERMORE WE OFFER:

-BELT CONVEYOR BELT CONVEYOR 1250 X 370 MM OF DREHZAHLSTEUEUNG WITH HOT AIR BLOWER HOTWIND 3400 W
-CONVEYOR BELT CONVEYORS MTF NL IE 010 255X30X100CM CLOCKED...
-CONVEYOR BELT CONVEYORS SALAMA 1000/400 L MOBILE 230V 120W
-CONVEYOR BELT CONVEYORS MTF GL IE 010 200X26X110CM CLOCKED...
-JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
-BAGGER AUTOBAG HS 100 EXCEL
-TEMPERATURE CONTROL DEVICE DIGICOLOR THERMONORM X-2000 3 ~ 400V ESCORTS 7 KW
-RING SPANNER SET STAHLWILLE/GARANT 41.36 34, 32, 30, 27 MM
-150 X STEEL 15 X 30 X 15 X 2.5 X U PROFILE (3 PACKETS) CA. 3000 MM...
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380 V 5, 35 KW
-CONDITIONING BATH TT-100 KB-U TOOL-TEMP AG CH 3 ~ 380V 12 KW
-LACKIE
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-pipe end facing& beveling machinefaceplate dia: 600 mm facingdia tube: max 400 mm cuttingalso b11 3595 - q01 3595 PIPE END FACING& BEVELING MACHINEFACEPLATE DIA: 600 MM FACINGDIA TUBE: MAX 400 MM CUTTINGALSO B11 3595 - Q01 3595
Vendedor: APT International
Año de construcción: usado
Precio: 590 €
Ubicación: Land-we offer:<br/>  <br/>  convection dryers arburg thermolift 100 380 v 5.35 kw<br/>  <br/>  the air dryer is operational. you are übernmommen in the context of a wake-up acquisition. due to a geschäfsumstelllung and or new acquisition for our clients they needed more teacher spreading.<br/>  <br/>  manufacturer: arburg<br/>  type: thermolit 100<br/>  number: 202187 and others<br/>  year of construction: 1979<br/>  total weight approx. 200 kg<br/>  connection:<br/>  voltage: 380 3 ~.<br/>  heating: 4,5 kw<br/>  blower: 0,85 kw<br/>  <br/>  state. well, ready for operation, see photos<br/>  <br/>  the dryer is still at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer is responsible for the transportation of the specified site of the purchased machine.<br/>  <br/>  5 further identical present.<br/>  <br/>  furthermore we offer:<br/>  -jig ingersoll gantry 500 + control & cooling<br/>  -temperature control device wittmann tempro primus c90 380v 3 ~ 7 kw<br/>  -conveyor belt conveyors of mtf bflvs ca. 35x215cm h = 10 / 155cm 6m / min<br/>  -injection moulding machine arburg allrounder 305-210-700 + angußp. klocke<br/>  -air circulation dryer arburg thermolift 100 380 v 5.35 kw<br/>  -8 workshop car guaranteed gedore heyco without content<br/>  -belt conveyor belt conveyor speed control with hot air blower hotwind 3400 w 1250 x 370 mm<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -electric heater wilms el 15 380v ~ 15 kw 900 m³/h<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -geyer house connection box type: kh00 - a 3x500v 20-50 a<br/>  -sea container 20 ft<br/> [...] WE OFFER:

CONVECTION DRYERS ARBURG THERMOLIFT 100 380 V 5.35 KW

THE AIR DRYER IS OPERATIONAL. YOU ARE üBERNMOMMEN IN THE CONTEXT OF A WAKE-UP ACQUISITION. DUE TO A GESCHäFSUMSTELLLUNG AND OR NEW ACQUISITION FOR OUR CLIENTS THEY NEEDED MORE TEACHER SPREADING.

MANUFACTURER: ARBURG
TYPE: THERMOLIT 100
NUMBER: 202187 AND OTHERS
YEAR OF CONSTRUCTION: 1979
TOTAL WEIGHT APPROX. 200 KG
CONNECTION:
VOLTAGE: 380 3 ~.
HEATING: 4,5 KW
BLOWER: 0,85 KW

STATE. WELL, READY FOR OPERATION, SEE PHOTOS

THE DRYER IS STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

5 FURTHER IDENTICAL PRESENT.

FURTHERMORE WE OFFER:
-JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
-TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO PRIMUS C90 380V 3 ~ 7 KW
-CONVEYOR BELT CONVEYORS OF MTF BFLVS CA. 35X215CM H = 10 / 155CM 6M / MIN
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 305-210-700 + ANGUßP. KLOCKE
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380 V 5.35 KW
-8 WORKSHOP CAR GUARANTEED GEDORE HEYCO WITHOUT CONTENT
-BELT CONVEYOR BELT CONVEYOR SPEED CONTROL WITH HOT AIR BLOWER HOTWIND 3400 W 1250 X 370 MM
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-ELECTRIC HEATER WILMS EL 15 380V ~ 15 KW 900 M³/H
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-GEYER HOUSE CONNECTION BOX TYPE: KH00 - A 3X500V 20-50 A
-SEA CONTAINER 20 FT
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-
Vendedor: APT International
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-we offer:<br/>  <br/>  jig ingersoll gantry 500 + control & cooling<br/>  without magnetic plate and tool holders<br/>  <br/>  the machine was acquired as part of a takeover of an insolvent company. it is now sold based on a geschäfsumstelllung/umstrukturioerung for our customers. the machine worked up to the production setting. it was located on the site. she is still electrically switched on. software is deinstallie through longer life, must be installed (available).<br/>  <br/>  the system includes the control cabinet muli pulse and cooling mta the jig<br/>  <br/>  manufacturer: ingersoll hansen<br/>  no. 573031<br/>  type: gantry 500<br/>  year of construction: 1996<br/>  dimensions mm:: 2200 x 2150 x 2540<br/>  area m ²: 5.9<br/>  weight: 4800 kg<br/>  connection: 400v 3 ~, 12 a, 50 hz, 8.5 kva<br/>  control voltage: 24 v dc<br/>  <br/>  work tank: lifting tray 750 x 650 x 420 mm<br/>  dieelikrikumhöhe: max 30 mm<br/>  <br/>  work head<br/>  max. load: 100 kg<br/>  maximum distance tool carrier plate/working table: 575 mm<br/>  <br/>  integrated c axis<br/>  speed adjustable: 1.20 1/min<br/>  resolution: 0.001 mm<br/>  capacity: 50 kg<br/>  <br/>  work table<br/>  surface: 730 x 630 mm<br/>  capacity: 1000 kg<br/>  <br/>  procedures<br/>  x y z: 525 x 400 x 375 mm<br/>  y (exchange of electrodes): 675 mm<br/>  <br/>  multi pulse control<br/>  cnc - dialog: 32 bit cnc<br/>  drive: digital ac servo motors<br/>  maximum travel speed: 2000 mm / min<br/>  <br/>  dielectric supply<br/>  filter system: cartridge<br/>  filter area: 4 m²<br/>  capacity: 400 l<br/>  <br/>  electrode changing system: pick.up-plate off WE OFFER:

JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
WITHOUT MAGNETIC PLATE AND TOOL HOLDERS

THE MACHINE WAS ACQUIRED AS PART OF A TAKEOVER OF AN INSOLVENT COMPANY. IT IS NOW SOLD BASED ON A GESCHäFSUMSTELLLUNG/UMSTRUKTURIOERUNG FOR OUR CUSTOMERS. THE MACHINE WORKED UP TO THE PRODUCTION SETTING. IT WAS LOCATED ON THE SITE. SHE IS STILL ELECTRICALLY SWITCHED ON. SOFTWARE IS DEINSTALLIE THROUGH LONGER LIFE, MUST BE INSTALLED (AVAILABLE).

THE SYSTEM INCLUDES THE CONTROL CABINET MULI PULSE AND COOLING MTA THE JIG

MANUFACTURER: INGERSOLL HANSEN
NO. 573031
TYPE: GANTRY 500
YEAR OF CONSTRUCTION: 1996
DIMENSIONS MM:: 2200 X 2150 X 2540
AREA M ²: 5.9
WEIGHT: 4800 KG
CONNECTION: 400V 3 ~, 12 A, 50 HZ, 8.5 KVA
CONTROL VOLTAGE: 24 V DC

WORK TANK: LIFTING TRAY 750 X 650 X 420 MM
DIEELIKRIKUMHöHE: MAX 30 MM

WORK HEAD
MAX. LOAD: 100 KG
MAXIMUM DISTANCE TOOL CARRIER PLATE/WORKING TABLE: 575 MM

INTEGRATED C AXIS
SPEED ADJUSTABLE: 1.20 1/MIN
RESOLUTION: 0.001 MM
CAPACITY: 50 KG

WORK TABLE
SURFACE: 730 X 630 MM
CAPACITY: 1000 KG

PROCEDURES
X Y Z: 525 X 400 X 375 MM
Y (EXCHANGE OF ELECTRODES): 675 MM

MULTI PULSE CONTROL
CNC - DIALOG: 32 BIT CNC
DRIVE: DIGITAL AC SERVO MOTORS
MAXIMUM TRAVEL SPEED: 2000 MM / MIN

DIELECTRIC SUPPLY
FILTER SYSTEM: CARTRIDGE
FILTER AREA: 4 M²
CAPACITY: 400 L

ELECTRODE CHANGING SYSTEM: PICK.UP-PLATE OFF
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 16.900 €
Ubicación: Land-we offer:<br/>  <br/>  jig ingersoll gantry 500 + control & cooling<br/>  without magnetic plate and tool holders<br/>  <br/>  the machine was acquired as part of a takeover of an insolvent company. it is now sold based on a geschäfsumstelllung/umstrukturioerung for our customers. the machine worked up to the production setting. it was located on the site. she is still electrically switched on. software is deinstallie through longer life, must be installed (available).<br/>  <br/>  the system includes the control cabinet muli pulse and cooling mta the jig<br/>  <br/>  manufacturer: ingersoll hansen<br/>  no. 573031<br/>  type: gantry 500<br/>  year of construction: 1996<br/>  dimensions mm:: 2200 x 2150 x 2540<br/>  area m ²: 5.9<br/>  weight: 4800 kg<br/>  connection: 400v 3 ~, 12 a, 50 hz, 8.5 kva<br/>  control voltage: 24 v dc<br/>  <br/>  work tank: lifting tray 750 x 650 x 420 mm<br/>  dieelikrikumhöhe: max 30 mm<br/>  <br/>  work head<br/>  max. load: 100 kg<br/>  maximum distance tool carrier plate/working table: 575 mm<br/>  <br/>  integrated c axis<br/>  speed adjustable: 1.20 1/min<br/>  resolution: 0.001 mm<br/>  capacity: 50 kg<br/>  <br/>  work table<br/>  surface: 730 x 630 mm<br/>  capacity: 1000 kg<br/>  <br/>  procedures<br/>  x y z: 525 x 400 x 375 mm<br/>  y (exchange of electrodes): 675 mm<br/>  <br/>  multi pulse control<br/>  cnc - dialog: 32 bit cnc<br/>  drive: digital ac servo motors<br/>  maximum travel speed: 2000 mm / min<br/>  <br/>  dielectric supply<br/>  filter system: cartridge<br/>  filter area: 4 m²<br/>  capacity: 400 l<br/>  <br/>  electrode changing system: pick.up-plate off WE OFFER:

JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
WITHOUT MAGNETIC PLATE AND TOOL HOLDERS

THE MACHINE WAS ACQUIRED AS PART OF A TAKEOVER OF AN INSOLVENT COMPANY. IT IS NOW SOLD BASED ON A GESCHäFSUMSTELLLUNG/UMSTRUKTURIOERUNG FOR OUR CUSTOMERS. THE MACHINE WORKED UP TO THE PRODUCTION SETTING. IT WAS LOCATED ON THE SITE. SHE IS STILL ELECTRICALLY SWITCHED ON. SOFTWARE IS DEINSTALLIE THROUGH LONGER LIFE, MUST BE INSTALLED (AVAILABLE).

THE SYSTEM INCLUDES THE CONTROL CABINET MULI PULSE AND COOLING MTA THE JIG

MANUFACTURER: INGERSOLL HANSEN
NO. 573031
TYPE: GANTRY 500
YEAR OF CONSTRUCTION: 1996
DIMENSIONS MM:: 2200 X 2150 X 2540
AREA M ²: 5.9
WEIGHT: 4800 KG
CONNECTION: 400V 3 ~, 12 A, 50 HZ, 8.5 KVA
CONTROL VOLTAGE: 24 V DC

WORK TANK: LIFTING TRAY 750 X 650 X 420 MM
DIEELIKRIKUMHöHE: MAX 30 MM

WORK HEAD
MAX. LOAD: 100 KG
MAXIMUM DISTANCE TOOL CARRIER PLATE/WORKING TABLE: 575 MM

INTEGRATED C AXIS
SPEED ADJUSTABLE: 1.20 1/MIN
RESOLUTION: 0.001 MM
CAPACITY: 50 KG

WORK TABLE
SURFACE: 730 X 630 MM
CAPACITY: 1000 KG

PROCEDURES
X Y Z: 525 X 400 X 375 MM
Y (EXCHANGE OF ELECTRODES): 675 MM

MULTI PULSE CONTROL
CNC - DIALOG: 32 BIT CNC
DRIVE: DIGITAL AC SERVO MOTORS
MAXIMUM TRAVEL SPEED: 2000 MM / MIN

DIELECTRIC SUPPLY
FILTER SYSTEM: CARTRIDGE
FILTER AREA: 4 M²
CAPACITY: 400 L

ELECTRODE CHANGING SYSTEM: PICK.UP-PLATE OFF
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 250 €
Ubicación: Land-we offer<br/>  from a business resolution<br/>  <br/>  oil drip pan, collecting sump with grating - 200 l vol. see photo for 2 x 200 l barrels<br/>  <br/>  manufacturer: unknown<br/>  <br/>  usage area<br/>  for the safe storage of up to two 200 l barrels<br/>  application<br/>  approved for the storage of substances hazardous to water (water hazard class 1-3), combustible or inflammable liquids<br/>  <br/>  capacity - 2 x 200 l barrels<br/>  grating - hot-dip galvanized, removable<br/>  execution - steel, painted<br/>  collection volume - 200 l<br/>  dimensions - approx. 1200 x 800 x 350 mm<br/>  load approx. 850 kg / m ²<br/>  integrated with 4 pcs fork bags (running-in width 270 mm) for safe transport<br/>  <br/>  sale of the site in halle (exw) by appointment.<br/>  <br/>  condition: almost like new, see photos hasn\'t been used yet,<br/>  <br/>  furthermore we offer:<br/>  <br/>  -jig ingersoll gantry 500 + control & cooling<br/>  -vigor tool trolley gedore heyco without content<br/>  -ring spanner set stahlwille/garant 21 pcs 7-36 mm<br/>  -thermostat uiversal different bälz & son / pma ever<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -bench bench bench 334 x 90 x 87 cm 40 mm plate<br/>  -pressure air pump diaphragm pump graco president 205038 airless<br/>  -bench 292x90x87cm plate: 40 mm<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -office desk with castors metra könig & neurath<br/>  -grundfos magna 65-60 f 340 mm energiesparpumpe / circulation pump with shut-off valve<br/>  -spritzg WE OFFER
FROM A BUSINESS RESOLUTION

OIL DRIP PAN, COLLECTING SUMP WITH GRATING - 200 L VOL. SEE PHOTO FOR 2 X 200 L BARRELS

MANUFACTURER: UNKNOWN

USAGE AREA
FOR THE SAFE STORAGE OF UP TO TWO 200 L BARRELS
APPLICATION
APPROVED FOR THE STORAGE OF SUBSTANCES HAZARDOUS TO WATER (WATER HAZARD CLASS 1-3), COMBUSTIBLE OR INFLAMMABLE LIQUIDS

CAPACITY - 2 X 200 L BARRELS
GRATING - HOT-DIP GALVANIZED, REMOVABLE
EXECUTION - STEEL, PAINTED
COLLECTION VOLUME - 200 L
DIMENSIONS - APPROX. 1200 X 800 X 350 MM
LOAD APPROX. 850 KG / M ²
INTEGRATED WITH 4 PCS FORK BAGS (RUNNING-IN WIDTH 270 MM) FOR SAFE TRANSPORT

SALE OF THE SITE IN HALLE (EXW) BY APPOINTMENT.

CONDITION: ALMOST LIKE NEW, SEE PHOTOS HASN\'T BEEN USED YET,

FURTHERMORE WE OFFER:

-JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
-VIGOR TOOL TROLLEY GEDORE HEYCO WITHOUT CONTENT
-RING SPANNER SET STAHLWILLE/GARANT 21 PCS 7-36 MM
-THERMOSTAT UIVERSAL DIFFERENT BäLZ & SON / PMA EVER
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-BENCH BENCH BENCH 334 X 90 X 87 CM 40 MM PLATE
-PRESSURE AIR PUMP DIAPHRAGM PUMP GRACO PRESIDENT 205038 AIRLESS
-BENCH 292X90X87CM PLATE: 40 MM
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-OFFICE DESK WITH CASTORS METRA KöNIG & NEURATH
-GRUNDFOS MAGNA 65-60 F 340 MM ENERGIESPARPUMPE / CIRCULATION PUMP WITH SHUT-OFF VALVE
-SPRITZG
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 500 €
Ubicación: Land-we offer:<br/>  <br/>  temperature control device remak tp w 150 9.0 ew/ep 4000v 3 ~ 9 kw<br/>  <br/>  the device was acquired in the context of the acquisition of an insolvent company. be. it is not in use and stored.<br/>  <br/>  manufacturer: remak clean home now tap<br/>  type: tp w 150 9.0 ew/ep 400v 3 ~ 9 kw<br/>  no. 36000427/02<br/>  year of built: 07/99<br/>  heating power: escorts 9.0 kw<br/>  connection: 3 x 400v 50 hz with si<br/>  dimensions: approx. 600 mm, h =, t = 1000 mm, b = 235 mm<br/>  weight: approx. 50 kg<br/>  <br/>  condition: used unchecked<br/>  <br/>  the plant is located currently at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer transport from the specified location of the store-bought machine responsible.<br/>  <br/>  furthermore we offer:<br/>  <br/>  -temperature control device wittmann tempro primus c90 380v 3 ~ 7 kw<br/>  -conveyor belt conveyors of mtf bflvs ca. 35x215cm h = 10 / 155cm 6m / min<br/>  -injection moulding machine arburg allrounder 305-210-700 + angußp. klocke<br/>  -air circulation dryer arburg thermolift 100 380 v 5.35 kw<br/>  -8 workshop car guaranteed gedore heyco without content<br/>  -jig ingersoll gantry 500 + control & cooling<br/>  -ring spanner set stahlwille/garant 41.36 34, 32, 30, 27 mm<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -150 x u steel profile (3 packets) 15x30x15x2, 5 x ca. 3000 mm...<br/>  -industry standing wide 128 x 61 x 95 cm<br/>  -electric heater wilms el 15 380v ~ 15 kw 900 m³/h<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -geyer house connection box type: kh00 - a 3x500v 20-50 a<br/>  -sea container 20 ft 26.6<br/> [...] WE OFFER:

TEMPERATURE CONTROL DEVICE REMAK TP W 150 9.0 EW/EP 4000V 3 ~ 9 KW

THE DEVICE WAS ACQUIRED IN THE CONTEXT OF THE ACQUISITION OF AN INSOLVENT COMPANY. BE. IT IS NOT IN USE AND STORED.

MANUFACTURER: REMAK CLEAN HOME NOW TAP
TYPE: TP W 150 9.0 EW/EP 400V 3 ~ 9 KW
NO. 36000427/02
YEAR OF BUILT: 07/99
HEATING POWER: ESCORTS 9.0 KW
CONNECTION: 3 X 400V 50 HZ WITH SI
DIMENSIONS: APPROX. 600 MM, H =, T = 1000 MM, B = 235 MM
WEIGHT: APPROX. 50 KG

CONDITION: USED UNCHECKED

THE PLANT IS LOCATED CURRENTLY AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER TRANSPORT FROM THE SPECIFIED LOCATION OF THE STORE-BOUGHT MACHINE RESPONSIBLE.

FURTHERMORE WE OFFER:

-TEMPERATURE CONTROL DEVICE WITTMANN TEMPRO PRIMUS C90 380V 3 ~ 7 KW
-CONVEYOR BELT CONVEYORS OF MTF BFLVS CA. 35X215CM H = 10 / 155CM 6M / MIN
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 305-210-700 + ANGUßP. KLOCKE
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380 V 5.35 KW
-8 WORKSHOP CAR GUARANTEED GEDORE HEYCO WITHOUT CONTENT
-JIG INGERSOLL GANTRY 500 + CONTROL & COOLING
-RING SPANNER SET STAHLWILLE/GARANT 41.36 34, 32, 30, 27 MM
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-150 X U STEEL PROFILE (3 PACKETS) 15X30X15X2, 5 X CA. 3000 MM...
-INDUSTRY STANDING WIDE 128 X 61 X 95 CM
-ELECTRIC HEATER WILMS EL 15 380V ~ 15 KW 900 M³/H
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-GEYER HOUSE CONNECTION BOX TYPE: KH00 - A 3X500V 20-50 A
-SEA CONTAINER 20 FT 26.6
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-year of construction: 1994
control mode: erocom 30
hours of operation: 34766 std
traverse paths: x 550 mm
y axis 850 mm
z axis 450 mm
table size: 700x500mm
bowl: 840mm b = l = 630 mm h = 340 mm
workpiece weight max: 1000 kg
distance table - quill: 150 550 mm
resolution of the axes x, y, z: 0.001 mm
c-axis: 0.001 â°
rotation speed: 22 rpm
working current (validation): 25 a
feed range: 1000 mm / min
maximum electrode weight: 50 kg
electrode places magazine: 22
machine weight: 3, 4t
spindle cooling: yes
-machine space requirement approx.: 3 m x3m x 2, 65 m

accessories:
â?¢ probe renishaw4c1429 with system 3r recording
â?¢ alignment block system 3r c846360
â?¢ clamping block for milling machine system 3r
â?¢ approximately 30 electrode holder (various versions)
â?¢ all documents fully available
machine is fully functional, still in operation and can at any time
rootstyle are. YEAR OF CONSTRUCTION: 1994 CONTROL MODE: EROCOM 30 HOURS OF OPERATION: 34766 STD TRAVERSE PATHS: X 550 MM Y AXIS 850 MM Z AXIS 450 MM TABLE SIZE: 700X500MM BOWL: 840MM B = L = 630 MM H = 340 MM WORKPIECE WEIGHT MAX: 1000 KG DISTANCE TABLE - QUILL: 150 550 MM RESOLUTION OF THE AXES X, Y, Z: 0.001 MM C-AXIS: 0.001 &ACIRC;&DEG; ROTATION SPEED: 22 RPM WORKING CURRENT (VALIDATION): 25 A FEED RANGE: 1000 MM / MIN MAXIMUM ELECTRODE WEIGHT: 50 KG ELECTRODE PLACES MAGAZINE: 22 MACHINE WEIGHT: 3, 4T SPINDLE COOLING: YES -MACHINE SPACE REQUIREMENT APPROX.: 3 M X3M X 2, 65 M ACCESSORIES: &ACIRC;?&CENT; PROBE RENISHAW4C1429 WITH SYSTEM 3R RECORDING &ACIRC;?&CENT; ALIGNMENT BLOCK SYSTEM 3R C846360 &ACIRC;?&CENT; CLAMPING BLOCK FOR MILLING MACHINE SYSTEM 3R &ACIRC;?&CENT; APPROXIMATELY 30 ELECTRODE HOLDER (VARIOUS VERSIONS) &ACIRC;?&CENT; ALL DOCUMENTS FULLY AVAILABLE MACHINE IS FULLY FUNCTIONAL, STILL IN OPERATION AND CAN AT ANY TIME ROOTSTYLE ARE.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 1.700 €
Ubicación: Land-; ready for operation ; READY FOR OPERATION
Vendedor: Komplett-Konzept Verwertungs GmbH
Año de construcción: usado
Ubicación: Land-
older jig for spare parts

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  OLDER JIG FOR SPARE PARTS CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: used machinery auction RESALE 75.000 €
Ubicación: Land-painting line with activated carbon system for emission cleaning; with thermal-insulating walls and internal lighting system; size approx. 15,00x5,00x5,00h mt; shotblasting line with a PAINTING LINE WITH ACTIVATED CARBON SYSTEM FOR EMISSION CLEANING; WITH THERMAL-INSULATING WALLS AND INTERNAL LIGHTING SYSTEM; SIZE APPROX. 15,00X5,00X5,00H MT; SHOTBLASTING LINE WITH A "SA3" SANDING LEVEL; WITH AUTOMATIC ABRASIVE RECOVERY SYSTEM AND FUMES AND DUSTS SUCTION/ABATEMENT PLANT, WITH INTERNAL LIGHTING SYSTEM; SIZE APPROX. 15,00X5,00X5,00H MT; WITH N.4 IRON TROLLEYS ON WHEELS FOR HANDLING OF SEMIFINISHED PRODUCTS, SIZE APPROX. 4,00X2,70X0,80H MT EACH ONE; WITH "INGERSOLL RAND" COMPRESSOR AND DRYER (METAL FRAME AND SHOT BAGS NOT INCLUDED)
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-ingersoll
ig 1000 / erologic
year of manufacture 1995 control plt iv - cnc generator power 60 amp - erologic travel (x, y, z) 700 x 475 x 400 mm electrode changer 9-speed pick-up linear changer bowl (w x d x h) 990 x 745 x 500 mm workpiece clamping table (b x t) 900 x 650 mm 
capacity 2.000 kg accessories co2 fire-extinguishing, integr. cartridge filter system status overtaken price on request 
  INGERSOLL IG 1000 / EROLOGIC YEAR OF MANUFACTURE 1995 CONTROL PLT IV - CNC GENERATOR POWER 60 AMP - EROLOGIC TRAVEL (X, Y, Z) 700 X 475 X 400 MM ELECTRODE CHANGER 9-SPEED PICK-UP LINEAR CHANGER BOWL (W X D X H) 990 X 745 X 500 MM WORKPIECE CLAMPING TABLE (B X T) 900 X 650 MM CAPACITY 2.000 KG ACCESSORIES CO2 FIRE-EXTINGUISHING, INTEGR. CARTRIDGE FILTER SYSTEM STATUS OVERTAKEN PRICE ON REQUEST
Vendedor: MS-Schöllchen Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-in full working order IN FULL WORKING ORDER
Vendedor: CzeMar-Serwis
Año de construcción: usado
Ubicación: Land-quantity: 2, operating pressure: 7bar min., connected load: 5.5kw, capacity: 0.48m³/min, frequency: 50hz, weight: 513kg, length: 1315mm, width: 731mm, height: 835mm.   QUANTITY: 2, OPERATING PRESSURE: 7BAR MIN., CONNECTED LOAD: 5.5KW, CAPACITY: 0.48M³/MIN, FREQUENCY: 50HZ, WEIGHT: 513KG, LENGTH: 1315MM, WIDTH: 731MM, HEIGHT: 835MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-operating pressure: 7bar min., connected load: 11kw, capacity: 0.48m³/min, frequency: 50hz, weight: 513kg, length: 2059mm, width: 731mm, height: 1460mm.  OPERATING PRESSURE: 7BAR MIN., CONNECTED LOAD: 11KW, CAPACITY: 0.48M³/MIN, FREQUENCY: 50HZ, WEIGHT: 513KG, LENGTH: 2059MM, WIDTH: 731MM, HEIGHT: 1460MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-working pressure: 7.5bar max., input shaft power: 22kw, motor speed: 1470r/min, voltage: 400v, phase: 3, frequency: 50hz, gross mass: 540kg.  WORKING PRESSURE: 7.5BAR MAX., INPUT SHAFT POWER: 22KW, MOTOR SPEED: 1470R/MIN, VOLTAGE: 400V, PHASE: 3, FREQUENCY: 50HZ, GROSS MASS: 540KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-year of construction 1998 generator 70 amps - multi pulse control mitsubishi - 32 bit cnc travel (x, y, z) 550 x 850 x 450 mm bowl (w x d x h) 800 x 1100 x 450 mm workpiece clamping table (b x t) 760 x 1000 mm accessories co2 fire-extinguishing, 20 x plate changers, integr. cartridge filter unit, status: completely overhauled price on request 
 YEAR OF CONSTRUCTION 1998 GENERATOR 70 AMPS - MULTI PULSE CONTROL MITSUBISHI - 32 BIT CNC TRAVEL (X, Y, Z) 550 X 850 X 450 MM BOWL (W X D X H) 800 X 1100 X 450 MM WORKPIECE CLAMPING TABLE (B X T) 760 X 1000 MM ACCESSORIES CO2 FIRE-EXTINGUISHING, 20 X PLATE CHANGERS, INTEGR. CARTRIDGE FILTER UNIT, STATUS: COMPLETELY OVERHAULED PRICE ON REQUEST
Vendedor: MS-Schöllchen Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Precio: 5.200 €
Ubicación: Land-power:45kw
volume flow:1,9-6,5m3/min
pressure:10bar  POWER:45KW VOLUME FLOW:1,9-6,5M3/MIN PRESSURE:10BAR
Vendedor: CzeMar-Serwis
Año de construcción: usado
Ubicación: Land-year 1999 generator 70 amps - multi pulse control mitsubishi - 32 bit cnc travel (x, y, z) 525 x 400 x 375 mm bowl (w x d x h) 750 x 650 x 420 mm work table (wxd) 730 x 630 mm accessories rear derailleur, integr. cartridge filter unit, co2 fire extinguishing status outdated warranty - price on request 
 YEAR 1999 GENERATOR 70 AMPS - MULTI PULSE CONTROL MITSUBISHI - 32 BIT CNC TRAVEL (X, Y, Z) 525 X 400 X 375 MM BOWL (W X D X H) 750 X 650 X 420 MM WORK TABLE (WXD) 730 X 630 MM ACCESSORIES REAR DERAILLEUR, INTEGR. CARTRIDGE FILTER UNIT, CO2 FIRE EXTINGUISHING STATUS OUTDATED WARRANTY - PRICE ON REQUEST
Vendedor: MS-Schöllchen Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-manufacturers including bosch, stanley, cleco, ingersoll rand, atlas copco (straight screwdrivers, pneumatic pneumatic ratchet ratchet tongs, impulse screwdriver automatic, ratchet wrenches, torque wrench angle screwdrivers, pneumatic screwdriver). blind rivet pliers, rivet tool, blind mother tong, bã¶llhoff, bollhoff, gesipa, oetiker, etc.

inquiries, levy also individually possible. MANUFACTURERS INCLUDING BOSCH, STANLEY, CLECO, INGERSOLL RAND, ATLAS COPCO (STRAIGHT SCREWDRIVERS, PNEUMATIC PNEUMATIC RATCHET RATCHET TONGS, IMPULSE SCREWDRIVER AUTOMATIC, RATCHET WRENCHES, TORQUE WRENCH ANGLE SCREWDRIVERS, PNEUMATIC SCREWDRIVER). BLIND RIVET PLIERS, RIVET TOOL, BLIND MOTHER TONG, B&ATILDE;&PARA;LLHOFF, BOLLHOFF, GESIPA, OETIKER, ETC. INQUIRIES, LEVY ALSO INDIVIDUALLY POSSIBLE.
Vendedor: Gebrauchttechnik Alexander Paulus
Año de construcción: usado
Ubicación: Land-year of construction 1997 generator 70 amps - multi pulse control mitsubishi - 32 bit cnc travel (x, y, z) 525 x 400 x 375 mm electrode changer 20 plate changer bowl (w x d x h) 750 x 650 x 420 mm (w x d) desk 730 x 630 mm capacity 1000 kg accessories integr. obsolete cartridge filter system, co2 fire extinguishing status 
 YEAR OF CONSTRUCTION 1997 GENERATOR 70 AMPS - MULTI PULSE CONTROL MITSUBISHI - 32 BIT CNC TRAVEL (X, Y, Z) 525 X 400 X 375 MM ELECTRODE CHANGER 20 PLATE CHANGER BOWL (W X D X H) 750 X 650 X 420 MM (W X D) DESK 730 X 630 MM CAPACITY 1000 KG ACCESSORIES INTEGR. OBSOLETE CARTRIDGE FILTER SYSTEM, CO2 FIRE EXTINGUISHING STATUS
Vendedor: MS-Schöllchen Werkzeugmaschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)