1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-year built: approx 1980
blade length: 300 mm
cutting width: 290 mm
gr. material thickness: 80 x 10 mm
machine weight: 250 kg

equipment / accessories
pneumatic release for continuous operation
foot switch
machine base

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the snips in advance under power.
 YEAR BUILT: APPROX 1980 BLADE LENGTH: 300 MM CUTTING WIDTH: 290 MM GR. MATERIAL THICKNESS: 80 X 10 MM MACHINE WEIGHT: 250 KG EQUIPMENT / ACCESSORIES PNEUMATIC RELEASE FOR CONTINUOUS OPERATION FOOT SWITCH MACHINE BASE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE SNIPS IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx3dk12231; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX3DK12231; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 3.250 €
Ubicación: Land-flott column drilling machine
type sb 25 st / r1
mk 3
keyless chuck
digital displays for speed and depth
normal / dauerbohrleistung 25/30 mm
spindle stroke / drilling depth 125 mm
throat depth 260 mm
size 420 x 340 mm stepless speed
table height adjustment
checked
operating instructions FLOTT COLUMN DRILLING MACHINE TYPE SB 25 ST / R1 MK 3 KEYLESS CHUCK DIGITAL DISPLAYS FOR SPEED AND DEPTH NORMAL / DAUERBOHRLEISTUNG 25/30 MM SPINDLE STROKE / DRILLING DEPTH 125 MM THROAT DEPTH 260 MM SIZE 420 X 340 MM STEPLESS SPEED TABLE HEIGHT ADJUSTMENT CHECKED OPERATING INSTRUCTIONS
Vendedor: Optimal Maschinen UG (haftungsbeschränkt)
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx7dk13277; rear tyres remaining: 60; front tyres remaining: 60; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX7DK13277; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-force: 5500 kn (550t)
closing speed: 885 mm / s
form width min / max: 300/850
distance between columns: 830x830 mm
post diameter: 150mm FORCE: 5500 KN (550T) CLOSING SPEED: 885 MM / S FORM WIDTH MIN / MAX: 300/850 DISTANCE BETWEEN COLUMNS: 830X830 MM POST DIAMETER: 150MM
Vendedor: BASTA machinery
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-; gross weight [kg]: 2300; registration number: uj1dl22nx4dk12449; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 200 ; GROSS WEIGHT [KG]: 2300; REGISTRATION NUMBER: UJ1DL22NX4DK12449; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 200
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-technical data
 tip height 110 mm
 centre distance 300 mm
 swing over cross slide 115 mm
 spindle bore 32 mm
 sled:
 longitudinal travel (z axis) 295 mm
 plan travel (x-axis) 220 mm
 turret slide: number 1
 number of positions revolver 8
 sleeve diameter 35 mm
 spindle retainer: camlock
 spindle speeds:
 continuously variable from 30 rpm to 6000 rpm
 tailstock quill recording:
 morse taper 2 mk
 quill stroke 100 mm
 feeds: continuously variable
 length of 0.1 mm / min up to 5000 mm/min
 map of 0.1 mm / min up to 5000 mm/min
 rapid traverse 10 m / min
 kw spindle motor 5.50
 connection 50 hz 3 x 380 volt
 machine weight 1350 kg
 dimensions machine:
 length 1700 mm
 1942 mm wide
 1774 mm

miscellaneous accessories:
 lighting
 coolant system
 splash guard cabin complete
 central lubrication system
 electronic handwheel
 interface rs 232
 c axis with interpolation
 chip conveyor
 tool holder set
 driven tool holders
 collet chucks
 bucher TECHNICAL DATA TIP HEIGHT 110 MM CENTRE DISTANCE 300 MM SWING OVER CROSS SLIDE 115 MM SPINDLE BORE 32 MM SLED: LONGITUDINAL TRAVEL (Z AXIS) 295 MM PLAN TRAVEL (X-AXIS) 220 MM TURRET SLIDE: NUMBER 1 NUMBER OF POSITIONS REVOLVER 8 SLEEVE DIAMETER 35 MM SPINDLE RETAINER: CAMLOCK SPINDLE SPEEDS: CONTINUOUSLY VARIABLE FROM 30 RPM TO 6000 RPM TAILSTOCK QUILL RECORDING: MORSE TAPER 2 MK QUILL STROKE 100 MM FEEDS: CONTINUOUSLY VARIABLE LENGTH OF 0.1 MM / MIN UP TO 5000 MM/MIN MAP OF 0.1 MM / MIN UP TO 5000 MM/MIN RAPID TRAVERSE 10 M / MIN KW SPINDLE MOTOR 5.50 CONNECTION 50 HZ 3 X 380 VOLT MACHINE WEIGHT 1350 KG DIMENSIONS MACHINE: LENGTH 1700 MM 1942 MM WIDE 1774 MM MISCELLANEOUS ACCESSORIES: LIGHTING COOLANT SYSTEM SPLASH GUARD CABIN COMPLETE CENTRAL LUBRICATION SYSTEM ELECTRONIC HANDWHEEL INTERFACE RS 232 C AXIS WITH INTERPOLATION CHIP CONVEYOR TOOL HOLDER SET DRIVEN TOOL HOLDERS COLLET CHUCKS BUCHER
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Precio: 26.500 €
Ubicación: Land-; accessories: leistung (brief):81, bereifung (v):15.5-25l2, bereifung (h):15.5-25l2, allrad, kabine, diesel; lift height[mm]: 1250; maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):81, BEREIFUNG (V):15.5-25L2, BEREIFUNG (H):15.5-25L2, ALLRAD, KABINE, DIESEL; LIFT HEIGHT[MM]: 1250; MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 225.000 €
Ubicación: Land-autom. shelf stock or akl, 7.584 shelf plots, 250 kg load capacity, tablarmaã?e 1.230 mm x 620 mm x 150 mm / 250 mm - used -:
 
price from site: â?¬225.000.-(net) plus montages etc.!
 
 
2-g shelf warehouse with just deep storage and conveyor systems for the connection of 2 jobs
 
manufacturer: tgw, a-4600 wels
type: shelf storage
year of construction / operation: 07.2007
 description:
â·         length of the streets: ca 51m
â·         height of the shelves: ca 9, 3 m
â·         sprinkler system: no
 stacker cranes
o number: 2
o type: stratus, lifting: spectra
 rack system
o number shelf location: 7.584
specialist load: 250 kg
o shelves:
⧠number of shelves: 5.280 pcs., galvanized steel (2mmm), smooth ground on 2 opposite sides with bar code tags
⧠dimensions: 1.230mm x 620mm x 150mm / 250mm
⧠sektorierung of the shelves possible
â·         conveyor: 1 cross reverse thrust car of the two streets and two jobs connects
â·         number of jobs: 2 - concurrent use of paging possible /
â·         system performance:
o rack serving unit: based on 76 and paging / h in the double play
 condition: good
available: from approximately april 2020!
location: austria
 
more photos on request! AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMAÃ?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: Â?¬225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: · LENGTH OF THE STREETS: CA 51M · HEIGHT OF THE SHELVES: CA 9, 3 M · SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: § NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS § DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM § SEKTORIERUNG OF THE SHELVES POSSIBLE · CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS · NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / · SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 25.800 €
Ubicación: Land-; rear tyres remaining: 60; front tyres remaining: 60; accessories: leistung (brief):75, bereifung (v):405/70-24, bereifung (h):405/70-24, allrad, kabine, diesel, teleskoparm (längenverstellung) ; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; ACCESSORIES: LEISTUNG (BRIEF):75, BEREIFUNG (V):405/70-24, BEREIFUNG (H):405/70-24, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-machine type lathe - cycle controlled make gildemeister nef type plus 500 year 1998
control type cnc forkhart 315 mm three-back chuck
storage location eersel
country of origin germany delivery immediately cargo basis exw technical details
control heidenhain manual plus rotary diameter 500 mm turning diameter over slide 290 mm turning length 1000 mm plan route 250 mm chuck diameter of 260 mm spindle speeds gear-unit stage 1 80-250 1 rpm 
spindle speeds gear-unit stage 2 20-710 1/min. 
spindle speed gear level 3 80-2800 1/min. 
spindle drive 11 kw torque spindle 100% ed 1050 nm max spindle nose according to din 55027 - size 8 spindle bore 70 mm hollow cone of spindle nose metric 80 spindle diameter in the vord. camp 100 mm feed force longitudinal / plan 10 / 5 kn feed 5 m / min rapid traverse - longitudinal/plan 8 / 6 m / min tool holder multifix c tailstock quill diameter 80 mm tailstock hub 180 mm tailstock spindle mount mt 5 weight - machine 3.20 x 1.75 x 1.85 m additional information
grundig heidenhain manual plus control
 MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE GILDEMEISTER NEF TYPE PLUS 500 YEAR 1998 CONTROL TYPE CNC FORKHART 315 MM THREE-BACK CHUCK STORAGE LOCATION EERSEL COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASIS EXW TECHNICAL DETAILS CONTROL HEIDENHAIN MANUAL PLUS ROTARY DIAMETER 500 MM TURNING DIAMETER OVER SLIDE 290 MM TURNING LENGTH 1000 MM PLAN ROUTE 250 MM CHUCK DIAMETER OF 260 MM SPINDLE SPEEDS GEAR-UNIT STAGE 1 80-250 1 RPM SPINDLE SPEEDS GEAR-UNIT STAGE 2 20-710 1/MIN. SPINDLE SPEED GEAR LEVEL 3 80-2800 1/MIN. SPINDLE DRIVE 11 KW TORQUE SPINDLE 100% ED 1050 NM MAX SPINDLE NOSE ACCORDING TO DIN 55027 - SIZE 8 SPINDLE BORE 70 MM HOLLOW CONE OF SPINDLE NOSE METRIC 80 SPINDLE DIAMETER IN THE VORD. CAMP 100 MM FEED FORCE LONGITUDINAL / PLAN 10 / 5 KN FEED 5 M / MIN RAPID TRAVERSE - LONGITUDINAL/PLAN 8 / 6 M / MIN TOOL HOLDER MULTIFIX C TAILSTOCK QUILL DIAMETER 80 MM TAILSTOCK HUB 180 MM TAILSTOCK SPINDLE MOUNT MT 5 WEIGHT - MACHINE 3.20 X 1.75 X 1.85 M ADDITIONAL INFORMATION GRUNDIG HEIDENHAIN MANUAL PLUS CONTROL
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Precio: 26.700 €
Ubicación: Land-; accessories: leistung (brief):86, bereifung (v):460/70-24, bereifung (h):460/70-24, allrad, kabine, klimaanlage - manuell, schnellwechselrahmen, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):86, BEREIFUNG (V):460/70-24, BEREIFUNG (H):460/70-24, ALLRAD, KABINE, KLIMAANLAGE - MANUELL, SCHNELLWECHSELRAHMEN, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-machine specification

year: 2012 
control unit: unilog b6s 
robot: wittmann w737 

injection unit: .../750
screw diameter: 45 mm 
injection pressure: 2116 bar 
injection volume: 358 ccm 
shot capacity: 325 g 

clamping unit: tm 180/...
clamping force: 180 t 
platen size: 900 x 900 mm 
distance between tie bars: 570 x 520 mm 
mould height: 325 mm 
opening storke: 650 mm 
max.daylight: 975 mm 
ejector stroke: 200 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,9 x 1,6x 2,2 m 
weight: 7.300 kg 

equipment:
- 4 x hotrunner controller
- 3 x pneumatic valve
- 1 x core pull
- accumulator MACHINE SPECIFICATION YEAR: 2012 CONTROL UNIT: UNILOG B6S ROBOT: WITTMANN W737 INJECTION UNIT: .../750 SCREW DIAMETER: 45 MM INJECTION PRESSURE: 2116 BAR INJECTION VOLUME: 358 CCM SHOT CAPACITY: 325 G CLAMPING UNIT: TM 180/... CLAMPING FORCE: 180 T PLATEN SIZE: 900 X 900 MM DISTANCE BETWEEN TIE BARS: 570 X 520 MM MOULD HEIGHT: 325 MM OPENING STORKE: 650 MM MAX.DAYLIGHT: 975 MM EJECTOR STROKE: 200 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,9 X 1,6X 2,2 M WEIGHT: 7.300 KG EQUIPMENT: - 4 X HOTRUNNER CONTROLLER - 3 X PNEUMATIC VALVE - 1 X CORE PULL - ACCUMULATOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-; accessories: leistung (brief):57, bereifung (v):405/70-20, bereifung (h):405/70-20, allrad, kabine, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):57, BEREIFUNG (V):405/70-20, BEREIFUNG (H):405/70-20, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-gildemeister ctx 200 s2
 year: 1998
 heidenhain machine is prepared for the bar magazine.

with many tool box ca. 50!
 workspace
-turndiam over coverage 440 mm
-turndiam 210 mm
 x travel 160 mm
 longitudinal travel z 350 mm
 tool carrier
 -universal disc turret - tool station number 12 vdi 30

tailstock
-quill 50mm
-quill stroke 120 mm
quill recording mk3

machine dimensions - chip conveyor lxwxh 3930x1651x1690mm
-weight approx. 3000kg

 GILDEMEISTER CTX 200 S2 YEAR: 1998 HEIDENHAIN MACHINE IS PREPARED FOR THE BAR MAGAZINE. WITH MANY TOOL BOX CA. 50! WORKSPACE -TURNDIAM OVER COVERAGE 440 MM -TURNDIAM 210 MM X TRAVEL 160 MM LONGITUDINAL TRAVEL Z 350 MM TOOL CARRIER -UNIVERSAL DISC TURRET - TOOL STATION NUMBER 12 VDI 30 TAILSTOCK -QUILL 50MM -QUILL STROKE 120 MM QUILL RECORDING MK3 MACHINE DIMENSIONS - CHIP CONVEYOR LXWXH 3930X1651X1690MM -WEIGHT APPROX. 3000KG
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Precio: 27.500 €
Ubicación: Land-; accessories: leistung (brief):75, bereifung (v):17.5lr24, bereifung (h):17.5lr24, allrad, kabine, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 2600 ; ACCESSORIES: LEISTUNG (BRIEF):75, BEREIFUNG (V):17.5LR24, BEREIFUNG (H):17.5LR24, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 2600
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-machine specification

year: 2012 
control unit: unilog b6s 

injection unit: .../750
screw diameter: 45 mm 
injection pressure: 2116 bar 
injection volume: 358 ccm 
shot capacity: 325,7 g 

clamping unit: tm 240/...
clamping force: 240 t 
distance between tie bars: 570 x 570 mm 
mould height: 250...600 mm 
opening storke: 530 mm 
max.daylight: 1130 mm 
ejector stroke: 180 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5, 4 x 1,8 x 2,4 m 
weight: 10.000 kg 

equipment:
- 4 x hotrunner controller
- 3 x pneumatic valve
- 1 x core pull
- accumulator MACHINE SPECIFICATION YEAR: 2012 CONTROL UNIT: UNILOG B6S INJECTION UNIT: .../750 SCREW DIAMETER: 45 MM INJECTION PRESSURE: 2116 BAR INJECTION VOLUME: 358 CCM SHOT CAPACITY: 325,7 G CLAMPING UNIT: TM 240/... CLAMPING FORCE: 240 T DISTANCE BETWEEN TIE BARS: 570 X 570 MM MOULD HEIGHT: 250...600 MM OPENING STORKE: 530 MM MAX.DAYLIGHT: 1130 MM EJECTOR STROKE: 180 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5, 4 X 1,8 X 2,4 M WEIGHT: 10.000 KG EQUIPMENT: - 4 X HOTRUNNER CONTROLLER - 3 X PNEUMATIC VALVE - 1 X CORE PULL - ACCUMULATOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-; accessories: leistung (brief):88, bereifung (v):460/70r24, bereifung (h):460/70r24, arbeitsscheinwerfer 4x vorn, allrad, kabine, klimaanlage - manuell, schnellwechselrahmen, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3300 ; ACCESSORIES: LEISTUNG (BRIEF):88, BEREIFUNG (V):460/70R24, BEREIFUNG (H):460/70R24, ARBEITSSCHEINWERFER 4X VORN, ALLRAD, KABINE, KLIMAANLAGE - MANUELL, SCHNELLWECHSELRAHMEN, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3300
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-bending length 4100 /3150 mm, 200 ton, stroke 350 mm,.
was 197 mm cybelec dnc 900 225 mm, table control
y1, y2, x 1, x 2, y1, y2, r, automatic adt, hydr clamping, aut. clamping of 5-50 mm of the table, lift sheet in front, acc tool box with tools. to list,
light barrier fgs, 900 nowly overhauled with new sealings and valves in cylinder.
really good condition

l w h 4700 x 2500 x 3080 weight 14500 kg
 BENDING LENGTH 4100 /3150 MM, 200 TON, STROKE 350 MM,. WAS 197 MM CYBELEC DNC 900 225 MM, TABLE CONTROL Y1, Y2, X 1, X 2, Y1, Y2, R, AUTOMATIC ADT, HYDR CLAMPING, AUT. CLAMPING OF 5-50 MM OF THE TABLE, LIFT SHEET IN FRONT, ACC TOOL BOX WITH TOOLS. TO LIST, LIGHT BARRIER FGS, 900 NOWLY OVERHAULED WITH NEW SEALINGS AND VALVES IN CYLINDER. REALLY GOOD CONDITION L W H 4700 X 2500 X 3080 WEIGHT 14500 KG
Vendedor: K N Machinery
Año de construcción: usado
Precio: 26.800 €
Ubicación: Land-; rear tyres remaining: 70; front tyres remaining: 70; accessories: leistung (brief):73, bereifung (v):15.5-24, bereifung (h):15.5-24, allrad, kabine, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; ACCESSORIES: LEISTUNG (BRIEF):73, BEREIFUNG (V):15.5-24, BEREIFUNG (H):15.5-24, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-used dmg gildemeister twin 65 with y-b axis
control siemens 840 d powerline

technical data:
max. swing diameter  mm 250
max. turning diameter  mm 200
spindle distance mm 900

main spindle
max speed min-1 5,000
max bar passage mm 66

counter spindle
max speed min-1 5,000
maximum partial bar passage 66 x 650 mm
travel x-z axis mm 175 / 670
tailstock mounted taper mt 4

2 turrets with driven tools
speed driven tools min-1 4,000

slide 1 (top turret)
travel x - z axis mm 300 / 600
travel y mm +/-40
swing angle b axis (turret) degree -135°/+ 45°

slide 2 (lower turret)
travel path x - z axis mm 180 / 650

accessories:
y axis upper turret
b-axis upper turret
tailstock on counter spindle slide
workpiece - pickup equipment with gripper and conveyor belt
collet chuck on main and sub spindle
short rod feeder
chip conveyor
increased coolant system 20 bar  USED DMG GILDEMEISTER TWIN 65 WITH Y-B AXIS CONTROL SIEMENS 840 D POWERLINE TECHNICAL DATA: MAX. SWING DIAMETER MM 250 MAX. TURNING DIAMETER MM 200 SPINDLE DISTANCE MM 900 MAIN SPINDLE MAX SPEED MIN-1 5,000 MAX BAR PASSAGE MM 66 COUNTER SPINDLE MAX SPEED MIN-1 5,000 MAXIMUM PARTIAL BAR PASSAGE 66 X 650 MM TRAVEL X-Z AXIS MM 175 / 670 TAILSTOCK MOUNTED TAPER MT 4 2 TURRETS WITH DRIVEN TOOLS SPEED DRIVEN TOOLS MIN-1 4,000 SLIDE 1 (TOP TURRET) TRAVEL X - Z AXIS MM 300 / 600 TRAVEL Y MM +/-40 SWING ANGLE B AXIS (TURRET) DEGREE -135°/+ 45° SLIDE 2 (LOWER TURRET) TRAVEL PATH X - Z AXIS MM 180 / 650 ACCESSORIES: Y AXIS UPPER TURRET B-AXIS UPPER TURRET TAILSTOCK ON COUNTER SPINDLE SLIDE WORKPIECE - PICKUP EQUIPMENT WITH GRIPPER AND CONVEYOR BELT COLLET CHUCK ON MAIN AND SUB SPINDLE SHORT ROD FEEDER CHIP CONVEYOR INCREASED COOLANT SYSTEM 20 BAR
Vendedor: GEMATEC GmbH
Año de construcción: usado
Precio: 6.800 €
Ubicación: Land-bore diameter: 8 mm<br/>number of heads horizontal: 5 st.<br/>number of heads vertical: 3 st.<br/>control: ja <br/>! machine is still in use and can be visited!<br/><br/>to sell on behalf of the customer!<br/><br/>1 stegherr drilling center type bz<br/>**************************************<br/>the machine has 3 aggregate slides, of which aggregate slides<br/>1 fixed and unit slides 2 and 3 via the control to preset values<br/>be positioned.<br/><br/>unit carriage 1 (fixed) equipped with:<br/>-------------------------------------------------- -<br/><br/>a) 1 drilling unit for drilling the front side of the workpieces with<br/>  triple drill head, drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- speed ??of the drilling spindles: approx. 4000 rpm<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>  3 dowels, arranged like drill head, driving in max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 top bandbohraggregat arranged from above, with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glueing and dividing unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °<br/>  for converting the drilling unit from end to longitudinal operation<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>aggregate carriage 2<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>the aggregate carriage is equipped with:<br/><br/>a) drilling unit with 3 individually retrievable spindles for drilling the<br/>  fighter, rung and post drilling patterns on the long side of the workpiece<br/>  or the dowel holes on the workpiece ends.<br/>- drilling distance: 28/41 mm<br/>- drilling stroke for each spindle: max. 80 mm<br/>- speed: about 4000 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>b) drilling unit for lock plate hole, equipped with:<br/><br/>- simple boring head<br/>- fixed in height - distance from workpiece support: 51 mm<br/>- drill diameter: 2.5 mm<br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/><br/>c) drilling unit for mounting holes:<br/><br/>- drilling stroke: max. 80 mm<br/>- speed: about 4500 rpm<br/>- engine power: approx. 1.1 kw<br/>- mechanically fixed in height - distance from workpiece support: 31 mm<br/><br/>d) workpiece support table<br/>  with pneumatic workpiece clamping device and mounted topfandbohraggregat<br/>- can be disconnected voom unit carriage (pneumatic) and the<br/>  aggregate slides can each over this point left or right<br/>  bohraufgabenausführen. this is horizontal from each one<br/>  arranged aggregate possible until the end of the workpiece<br/><br/>e) topfandbohraggregat arranged from above with triple drill head<br/>  for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>aggregate carriage 3<br/><br/>servo axis in x direction, this turns on program on the<br/>workpiece length.<br/><br/>a) 1 drilling unit for drilling the front side of the wersktücke with triple <br/>drill head<br/>- drilling distance: 28/41 mm<br/>- drilling spindles individually retrievable<br/>- drilling stroke: max. 80 mm<br/>- drehzhal the drill spindles: about 4000 u / min<br/>- engine power: approx. 1.1 kw<br/>- chip extraction: diameter 160 mm<br/>- suction hose upwards<br/><br/>b) 1 stainless steel high pressure glue nozzle<br/>- legemount adjustable via program<br/>- glue monitoring via program<br/><br/>c) 1 dowel driving head for dowel diameter 8 mm, dowel length 60 mm<br/>- feeding and separation of the dowels via vibratory conveyors<br/>- 3 dowels, arranged like drill head, driving max. 3 dowels<br/>  in one operation<br/>- workpiece stop, lowered via pneumatic cylinder, around the workpiece<br/>  to strike exactly<br/><br/>d) 1 topfbandbohraggregat arranged from above<br/>  with triple drill head for roto pot bore<br/>- drilling stroke: max. 80 mm<br/>- engine power: approx. 1.1 kw<br/>- speed: about 4500 rpm<br/><br/>e) 1 carriage with controlled axis (x)<br/>  for moving the drilling, glue and dowel unit to the programmed<br/>  drilling positions<br/>- swivel axis, swivel range 90 °, for converting the drilling unit of<br/>  forehead-on longitudinal operation.<br/>  here, the entire axis (x) is also swiveled around this axis<br/>  to be used for longitudinal operation<br/><br/>the entire unit can be positioned in the x-axis via a servomotor and<br/>can thus reach any position on the workpiece and there the programmed<br/>doing work.<br/><br/>workpiece length scanning, so that the end holes are at the exact distance from<br/>external dimensions can be set.<br/>drilling unit automatically corrects any length deviations on the workpiece<br/>within a certain tolerance range.<br/><br/>for workpieces longer than 3 m, this workpiece must be in two working lengths<br/>be processed.<br/><br/>technical specifications:<br/><br/>- max. workpiece length: 3000 mm<br/>- min. workpiece length: 320 mm<br/>- workpiece thickness: 40-80 mm<br/>- workpiece clamping: pneumatic<br/>- workpiece loading or unloading: manually<br/>- all travel paths run on high-precision linear guides<br/>- 4 electronically program controlled axes (ball screw operation<br/>  or rack)<br/>- high-pressure glue system in stainless steel<br/>- glue monitoring via program<br/>- leichenge adjustable via control<br/>- 1 dowel vibration conveyor (large version) for anchor diameter 8 mm,<br/>  dowel length 60 mm<br/>- six-track dowel separation and feed (3x for right, 3x for left)<br/><br/>machine power is about 4 parts per minute. this is an average,<br/>which in individual cases may vary slightly upwards or downwards.<br/><br/>control of the machine<br/><br/>- pc / plc control based on windows<br/>- pc in industrial design with floppy disk drive, keyboard and<br/>  15farbbild flat monitor<br/>- user friendly machine program<br/>- high storage capacity<br/>- graphic blocks for visualization of the programmed drilling patterns<br/>program with error indication, i. errors that occur in the program flow<br/>  can be displayed on the screen and can thereby<br/>  be localized faster and corrected.<br/><br/>- extraction: 3 x diameter 160 upwards<br/>- extraction speed: approx. 25 m / s<br/><br/>the machine is online-enabled<br/><br/><br/>(techn. data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: 8 MM
NUMBER OF HEADS HORIZONTAL: 5 ST.
NUMBER OF HEADS VERTICAL: 3 ST.
CONTROL: JA
! MACHINE IS STILL IN USE AND CAN BE VISITED!

TO SELL ON BEHALF OF THE CUSTOMER!

1 STEGHERR DRILLING CENTER TYPE BZ
**************************************
THE MACHINE HAS 3 AGGREGATE SLIDES, OF WHICH AGGREGATE SLIDES
1 FIXED AND UNIT SLIDES 2 AND 3 VIA THE CONTROL TO PRESET VALUES
BE POSITIONED.

UNIT CARRIAGE 1 (FIXED) EQUIPPED WITH:
-------------------------------------------------- -

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WORKPIECES WITH
TRIPLE DRILL HEAD, DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- SPEED ??OF THE DRILLING SPINDLES: APPROX. 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING IN MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOP BANDBOHRAGGREGAT ARRANGED FROM ABOVE, WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUEING AND DIVIDING UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °
FOR CONVERTING THE DRILLING UNIT FROM END TO LONGITUDINAL OPERATION
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

AGGREGATE CARRIAGE 2

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

THE AGGREGATE CARRIAGE IS EQUIPPED WITH:

A) DRILLING UNIT WITH 3 INDIVIDUALLY RETRIEVABLE SPINDLES FOR DRILLING THE
FIGHTER, RUNG AND POST DRILLING PATTERNS ON THE LONG SIDE OF THE WORKPIECE
OR THE DOWEL HOLES ON THE WORKPIECE ENDS.
- DRILLING DISTANCE: 28/41 MM
- DRILLING STROKE FOR EACH SPINDLE: MAX. 80 MM
- SPEED: ABOUT 4000 RPM
- ENGINE POWER: APPROX. 1.1 KW

B) DRILLING UNIT FOR LOCK PLATE HOLE, EQUIPPED WITH:

- SIMPLE BORING HEAD
- FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 51 MM
- DRILL DIAMETER: 2.5 MM
- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW

C) DRILLING UNIT FOR MOUNTING HOLES:

- DRILLING STROKE: MAX. 80 MM
- SPEED: ABOUT 4500 RPM
- ENGINE POWER: APPROX. 1.1 KW
- MECHANICALLY FIXED IN HEIGHT - DISTANCE FROM WORKPIECE SUPPORT: 31 MM

D) WORKPIECE SUPPORT TABLE
WITH PNEUMATIC WORKPIECE CLAMPING DEVICE AND MOUNTED TOPFANDBOHRAGGREGAT
- CAN BE DISCONNECTED VOOM UNIT CARRIAGE (PNEUMATIC) AND THE
AGGREGATE SLIDES CAN EACH OVER THIS POINT LEFT OR RIGHT
BOHRAUFGABENAUSFüHREN. THIS IS HORIZONTAL FROM EACH ONE
ARRANGED AGGREGATE POSSIBLE UNTIL THE END OF THE WORKPIECE

E) TOPFANDBOHRAGGREGAT ARRANGED FROM ABOVE WITH TRIPLE DRILL HEAD
FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

AGGREGATE CARRIAGE 3

SERVO AXIS IN X DIRECTION, THIS TURNS ON PROGRAM ON THE
WORKPIECE LENGTH.

A) 1 DRILLING UNIT FOR DRILLING THE FRONT SIDE OF THE WERSKTüCKE WITH TRIPLE
DRILL HEAD
- DRILLING DISTANCE: 28/41 MM
- DRILLING SPINDLES INDIVIDUALLY RETRIEVABLE
- DRILLING STROKE: MAX. 80 MM
- DREHZHAL THE DRILL SPINDLES: ABOUT 4000 U / MIN
- ENGINE POWER: APPROX. 1.1 KW
- CHIP EXTRACTION: DIAMETER 160 MM
- SUCTION HOSE UPWARDS

B) 1 STAINLESS STEEL HIGH PRESSURE GLUE NOZZLE
- LEGEMOUNT ADJUSTABLE VIA PROGRAM
- GLUE MONITORING VIA PROGRAM

C) 1 DOWEL DRIVING HEAD FOR DOWEL DIAMETER 8 MM, DOWEL LENGTH 60 MM
- FEEDING AND SEPARATION OF THE DOWELS VIA VIBRATORY CONVEYORS
- 3 DOWELS, ARRANGED LIKE DRILL HEAD, DRIVING MAX. 3 DOWELS
IN ONE OPERATION
- WORKPIECE STOP, LOWERED VIA PNEUMATIC CYLINDER, AROUND THE WORKPIECE
TO STRIKE EXACTLY

D) 1 TOPFBANDBOHRAGGREGAT ARRANGED FROM ABOVE
WITH TRIPLE DRILL HEAD FOR ROTO POT BORE
- DRILLING STROKE: MAX. 80 MM
- ENGINE POWER: APPROX. 1.1 KW
- SPEED: ABOUT 4500 RPM

E) 1 CARRIAGE WITH CONTROLLED AXIS (X)
FOR MOVING THE DRILLING, GLUE AND DOWEL UNIT TO THE PROGRAMMED
DRILLING POSITIONS
- SWIVEL AXIS, SWIVEL RANGE 90 °, FOR CONVERTING THE DRILLING UNIT OF
FOREHEAD-ON LONGITUDINAL OPERATION.
HERE, THE ENTIRE AXIS (X) IS ALSO SWIVELED AROUND THIS AXIS
TO BE USED FOR LONGITUDINAL OPERATION

THE ENTIRE UNIT CAN BE POSITIONED IN THE X-AXIS VIA A SERVOMOTOR AND
CAN THUS REACH ANY POSITION ON THE WORKPIECE AND THERE THE PROGRAMMED
DOING WORK.

WORKPIECE LENGTH SCANNING, SO THAT THE END HOLES ARE AT THE EXACT DISTANCE FROM
EXTERNAL DIMENSIONS CAN BE SET.
DRILLING UNIT AUTOMATICALLY CORRECTS ANY LENGTH DEVIATIONS ON THE WORKPIECE
WITHIN A CERTAIN TOLERANCE RANGE.

FOR WORKPIECES LONGER THAN 3 M, THIS WORKPIECE MUST BE IN TWO WORKING LENGTHS
BE PROCESSED.

TECHNICAL SPECIFICATIONS:

- MAX. WORKPIECE LENGTH: 3000 MM
- MIN. WORKPIECE LENGTH: 320 MM
- WORKPIECE THICKNESS: 40-80 MM
- WORKPIECE CLAMPING: PNEUMATIC
- WORKPIECE LOADING OR UNLOADING: MANUALLY
- ALL TRAVEL PATHS RUN ON HIGH-PRECISION LINEAR GUIDES
- 4 ELECTRONICALLY PROGRAM CONTROLLED AXES (BALL SCREW OPERATION
OR RACK)
- HIGH-PRESSURE GLUE SYSTEM IN STAINLESS STEEL
- GLUE MONITORING VIA PROGRAM
- LEICHENGE ADJUSTABLE VIA CONTROL
- 1 DOWEL VIBRATION CONVEYOR (LARGE VERSION) FOR ANCHOR DIAMETER 8 MM,
DOWEL LENGTH 60 MM
- SIX-TRACK DOWEL SEPARATION AND FEED (3X FOR RIGHT, 3X FOR LEFT)

MACHINE POWER IS ABOUT 4 PARTS PER MINUTE. THIS IS AN AVERAGE,
WHICH IN INDIVIDUAL CASES MAY VARY SLIGHTLY UPWARDS OR DOWNWARDS.

CONTROL OF THE MACHINE

- PC / PLC CONTROL BASED ON WINDOWS
- PC IN INDUSTRIAL DESIGN WITH FLOPPY DISK DRIVE, KEYBOARD AND
15FARBBILD FLAT MONITOR
- USER FRIENDLY MACHINE PROGRAM
- HIGH STORAGE CAPACITY
- GRAPHIC BLOCKS FOR VISUALIZATION OF THE PROGRAMMED DRILLING PATTERNS
PROGRAM WITH ERROR INDICATION, I. ERRORS THAT OCCUR IN THE PROGRAM FLOW
CAN BE DISPLAYED ON THE SCREEN AND CAN THEREBY
BE LOCALIZED FASTER AND CORRECTED.

- EXTRACTION: 3 X DIAMETER 160 UPWARDS
- EXTRACTION SPEED: APPROX. 25 M / S

THE MACHINE IS ONLINE-ENABLED


(TECHN. DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-model year: 2012
working tonnage: 200.000 tons
in a good condition, no maintenance is required

please contact us for more detailed information MODEL YEAR: 2012 WORKING TONNAGE: 200.000 TONS IN A GOOD CONDITION, NO MAINTENANCE IS REQUIRED PLEASE CONTACT US FOR MORE DETAILED INFORMATION
Vendedor: Scandinavian & UK Machines
Año de construcción: usado
Ubicación: Land-material width: 2500 mm<br/>material thickness: 3 - 16 mm<br/>no. of straightening rolls: 5 <br/>straightening roll diameter: 160 mm<br/>barrel length: 2580 mm<br/>no. of auxiliary rolls: 2 <br/>auxiliary roll diameter: 260 mm<br/>distance of straigthening rolls: 175 mm<br/>straightening feed: 6,3 / 10 m/min<br/>main drive motor: 32 kw<br/>height over floor: 2,35 m<br/>total height of machine: 3,13 m<br/>total power requirement: 40 kw<br/>weight of the machine ca.: 18,9 t<br/><br/><br/><br/><br/> MATERIAL WIDTH: 2500 MM
MATERIAL THICKNESS: 3 - 16 MM
NO. OF STRAIGHTENING ROLLS: 5
STRAIGHTENING ROLL DIAMETER: 160 MM
BARREL LENGTH: 2580 MM
NO. OF AUXILIARY ROLLS: 2
AUXILIARY ROLL DIAMETER: 260 MM
DISTANCE OF STRAIGTHENING ROLLS: 175 MM
STRAIGHTENING FEED: 6,3 / 10 M/MIN
MAIN DRIVE MOTOR: 32 KW
HEIGHT OVER FLOOR: 2,35 M
TOTAL HEIGHT OF MACHINE: 3,13 M
TOTAL POWER REQUIREMENT: 40 KW
WEIGHT OF THE MACHINE CA.: 18,9 T




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-model year: 2016
working tonnage: 300.000 tons

in a good condition, no maintenance is required
please contact for more detailed information  MODEL YEAR: 2016 WORKING TONNAGE: 300.000 TONS IN A GOOD CONDITION, NO MAINTENANCE IS REQUIRED PLEASE CONTACT FOR MORE DETAILED INFORMATION
Vendedor: Scandinavian & UK Machines
Año de construcción: usado
Ubicación: Land-pressure: 40 t<br/>chamfer lenght: 1250 mm<br/>distance between columns: 1050 mm<br/>column arm: 200 mm<br/>table width: 140 mm<br/>ram stroke max. - stepless: 100 mm/sec<br/>dayligth: 300 mm<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 2.000 kg.<br/>range l-w-h: 1,6 x 1,25 x 1,98 m<br/><br/><br/><br/><br/> PRESSURE: 40 T
CHAMFER LENGHT: 1250 MM
DISTANCE BETWEEN COLUMNS: 1050 MM
COLUMN ARM: 200 MM
TABLE WIDTH: 140 MM
RAM STROKE MAX. - STEPLESS: 100 MM/SEC
DAYLIGTH: 300 MM
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 2.000 KG.
RANGE L-W-H: 1,6 X 1,25 X 1,98 M




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-man b&w 48/60 cylinder heads, complete with all fittings.

connecting rods, cylinder liners, pistons, fuel pumps,

turbochargers, water pumps, oil pumps 

are also available with us.   MAN B&W 48/60 CYLINDER HEADS, COMPLETE WITH ALL FITTINGS. CONNECTING RODS, CYLINDER LINERS, PISTONS, FUEL PUMPS, TURBOCHARGERS, WATER PUMPS, OIL PUMPS ARE ALSO AVAILABLE WITH US.
Vendedor: DEPA MARINE
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 6570 kg<br/>throat: 2070/1170 mm<br/>boring diameter: 50/65 mm<br/>dimensions (l x w x h) approx.: 5740 x 4540 x 3440 mm<br/>bed plate surface area: 2610 x 1050 x 260 mm<br/>turning speed range: 16 - 800 rpm<br/>spindle taper: morse 5 <br/>feed range: 0,05 - 0,5 mm/r<br/>description: <h3>kovosvit vom 50 radial drilling machine</h3> <br> - machine no.: 150220020<br> <u>technical data:</u><br> <br> <h3>main dimensions:</h3> <br> - largest/smallest outreach from the shell surface to the spindle axis: 2070/1170 mm<br> - largest/smallest radius at spindle limit positions: 2270/1370 mm<br> - largest/smallest ground clearance of the spindle head in vertical position (with inserted spindle): 1555/305 mm<br> - carriage track on the bed guide: 1200 mm<br> - sheath diameter: 400 mm<br> <br> <h3>spindle:</h3> <br> - spindle head diameter: 75 mm<br> - spindle cone: morse 5<br> - spindle stroke: 350 mm<br> - number of spindle speed steps: 15<br> - highest spindle torque: 450 nm<br> <br> <h3>drive:</h3> <br> - drilling motor (power/speed): 4/1425 kw/n. min/-1<br> - hoist motor: 2.2/1420 kw/n. min/-1<br> - sledge travel motor: 1.1/1420 kw/n. min/-1<br> - total power consumption of the machine: 13 kva<br> WEIGHT APPROX.: 6570 KG
THROAT: 2070/1170 MM
BORING DIAMETER: 50/65 MM
DIMENSIONS (L X W X H) APPROX.: 5740 X 4540 X 3440 MM
BED PLATE SURFACE AREA: 2610 X 1050 X 260 MM
TURNING SPEED RANGE: 16 - 800 RPM
SPINDLE TAPER: MORSE 5
FEED RANGE: 0,05 - 0,5 MM/R
DESCRIPTION:

KOVOSVIT VOM 50 RADIAL DRILLING MACHINE


- MACHINE NO.: 150220020
TECHNICAL DATA:

MAIN DIMENSIONS:


- LARGEST/SMALLEST OUTREACH FROM THE SHELL SURFACE TO THE SPINDLE AXIS: 2070/1170 MM
- LARGEST/SMALLEST RADIUS AT SPINDLE LIMIT POSITIONS: 2270/1370 MM
- LARGEST/SMALLEST GROUND CLEARANCE OF THE SPINDLE HEAD IN VERTICAL POSITION (WITH INSERTED SPINDLE): 1555/305 MM
- CARRIAGE TRACK ON THE BED GUIDE: 1200 MM
- SHEATH DIAMETER: 400 MM

SPINDLE:


- SPINDLE HEAD DIAMETER: 75 MM
- SPINDLE CONE: MORSE 5
- SPINDLE STROKE: 350 MM
- NUMBER OF SPINDLE SPEED STEPS: 15
- HIGHEST SPINDLE TORQUE: 450 NM

DRIVE:


- DRILLING MOTOR (POWER/SPEED): 4/1425 KW/N. MIN/-1
- HOIST MOTOR: 2.2/1420 KW/N. MIN/-1
- SLEDGE TRAVEL MOTOR: 1.1/1420 KW/N. MIN/-1
- TOTAL POWER CONSUMPTION OF THE MACHINE: 13 KVA
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-powder spray booth composed of: 
- booth lxwxh: 6200 x 2450 x 3250 mm 
- passage wxh: 800 x 1600 mm 
- 2x fire-extinguishing system 
- 2x cleaner + filter 
- 2x lift frame with 4 pistols 
- 2x zyklon 
- 8x powder cart 
- electric cabinet POWDER SPRAY BOOTH COMPOSED OF: - BOOTH LXWXH: 6200 X 2450 X 3250 MM - PASSAGE WXH: 800 X 1600 MM - 2X FIRE-EXTINGUISHING SYSTEM - 2X CLEANER + FILTER - 2X LIFT FRAME WITH 4 PISTOLS - 2X ZYKLON - 8X POWDER CART - ELECTRIC CABINET
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 1000 kg<br/>dimensions (l x w x h) approx.: 1600 x 1000 x 1800 mm<br/>description: casadei r36 router<br> serial number 89-19-10<br> working table size 1000 x 800 mm<br> distance between axis-column: 900 mm<br> hydraulic vertical axis<br> motor power 7 kw<br> 2 working speeds: 10.000 - 20.000 rpm<br> pedal operated WEIGHT APPROX.: 1000 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1000 X 1800 MM
DESCRIPTION: CASADEI R36 ROUTER
SERIAL NUMBER 89-19-10
WORKING TABLE SIZE 1000 X 800 MM
DISTANCE BETWEEN AXIS-COLUMN: 900 MM
HYDRAULIC VERTICAL AXIS
MOTOR POWER 7 KW
2 WORKING SPEEDS: 10.000 - 20.000 RPM
PEDAL OPERATED
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.060 €
Ubicación: Land-we offer for sale: used pallet racks,

manufacturer: jungheinrich type: b

scope of delivery: for 84 pitches

15 stand, height approx. 2,250 x 1,100 mm

56 runs, approx. 1,900 x k130 mm

112 pins for trusses

30 ground anchor m 12 mm

technical data:

shelf height of 2,250 mm

shelf depth 1,100 mm

payload field 6,000 kg

load capacity per 3,000 kg pair of traverse

manufacturer jungheinrich type: b

blue border color

color of the bars yellow
 

shipping:
cheaper shipping with several low-cost carriers can. 

please ask the freight specifying your postcode and location, as well as the desired quantity.

the eth ericus transport - u. handelsges. m.b.h exclusively used pallet racks to professionally installed offers you
a testing stand according to din en 15635.

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

eth professional shelf since 1983. 
WE OFFER FOR SALE: USED PALLET RACKS, MANUFACTURER: JUNGHEINRICH TYPE: B SCOPE OF DELIVERY: FOR 84 PITCHES 15 STAND, HEIGHT APPROX. 2,250 X 1,100 MM 56 RUNS, APPROX. 1,900 X K130 MM 112 PINS FOR TRUSSES 30 GROUND ANCHOR M 12 MM TECHNICAL DATA: SHELF HEIGHT OF 2,250 MM SHELF DEPTH 1,100 MM PAYLOAD FIELD 6,000 KG LOAD CAPACITY PER 3,000 KG PAIR OF TRAVERSE MANUFACTURER JUNGHEINRICH TYPE: B BLUE BORDER COLOR COLOR OF THE BARS YELLOW SHIPPING: CHEAPER SHIPPING WITH SEVERAL LOW-COST CARRIERS CAN. PLEASE ASK THE FREIGHT SPECIFYING YOUR POSTCODE AND LOCATION, AS WELL AS THE DESIRED QUANTITY. THE ETH ERICUS TRANSPORT - U. HANDELSGES. M.B.H EXCLUSIVELY USED PALLET RACKS TO PROFESSIONALLY INSTALLED OFFERS YOU A TESTING STAND ACCORDING TO DIN EN 15635. WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1000 x 1550 x 1700 mm<br/>description: kenbill router<br> serial number 0306012<br> table dimensions 1000 x 900 mm<br> tiltable table<br> vertical travel of the table approx. 150 mm<br> motor power 5 hp<br> 2 working speeds 10,000 - 20,000 rpm<br> pedal operated<br> distance between axis-column 750 mm<br> ce standards WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 1550 X 1700 MM
DESCRIPTION: KENBILL ROUTER
SERIAL NUMBER 0306012
TABLE DIMENSIONS 1000 X 900 MM
TILTABLE TABLE
VERTICAL TRAVEL OF THE TABLE APPROX. 150 MM
MOTOR POWER 5 HP
2 WORKING SPEEDS 10,000 - 20,000 RPM
PEDAL OPERATED
DISTANCE BETWEEN AXIS-COLUMN 750 MM
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 mm
	-space requirement approx.	         b t 810 x 570 x h 1260 mm
-weight approx.					  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 3200 kg<br/>dimensions (l x w x h) approx.: 2400 x 1800 x 2200 mm<br/>description: taci-ilma punching machine<br> serial number 110 a<br> maximum pressing pressure 30 tn<br> hits per minute: 36<br> maximum working width 2500 mm<br> measures of the working table 2650 x 500 mm<br> distance between frontal and rear punches: 200 mm<br> opening from 8 to 160 mm<br> WEIGHT APPROX.: 3200 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 1800 X 2200 MM
DESCRIPTION: TACI-ILMA PUNCHING MACHINE
SERIAL NUMBER 110 A
MAXIMUM PRESSING PRESSURE 30 TN
HITS PER MINUTE: 36
MAXIMUM WORKING WIDTH 2500 MM
MEASURES OF THE WORKING TABLE 2650 X 500 MM
DISTANCE BETWEEN FRONTAL AND REAR PUNCHES: 200 MM
OPENING FROM 8 TO 160 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 x 20 mm
	-space requirement approx.	 		 b t 810 x 570 x h 1260 mm
-weight approx.					  	  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 X 20 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 2800 x 2000 x 2500 mm<br/>description: ips loader machiner<br> serial number dpm-30607/01<br> it has 3 loading columns<br> distance between columns: 450 mm - 1050 mm (total distance 1500 mm)<br> number of supports per column: 17 pcs.<br> distance between supports 220 mm<br> width of the supports 175 mm<br> length of the rear cargo straps 1350 mm<br> total installed power 3,5 bar<br> maximum working pressure 6 bar<br> ce standards WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 2800 X 2000 X 2500 MM
DESCRIPTION: IPS LOADER MACHINER
SERIAL NUMBER DPM-30607/01
IT HAS 3 LOADING COLUMNS
DISTANCE BETWEEN COLUMNS: 450 MM - 1050 MM (TOTAL DISTANCE 1500 MM)
NUMBER OF SUPPORTS PER COLUMN: 17 PCS.
DISTANCE BETWEEN SUPPORTS 220 MM
WIDTH OF THE SUPPORTS 175 MM
LENGTH OF THE REAR CARGO STRAPS 1350 MM
TOTAL INSTALLED POWER 3,5 BAR
MAXIMUM WORKING PRESSURE 6 BAR
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-heliot tubular padder, model exp 146, year 1991

entrance from rotating platform
detwister
two padders, one for even, one for impregnation
exit by folder HELIOT TUBULAR PADDER, MODEL EXP 146, YEAR 1991 ENTRANCE FROM ROTATING PLATFORM DETWISTER TWO PADDERS, ONE FOR EVEN, ONE FOR IMPREGNATION EXIT BY FOLDER
Vendedor: Inautex
Año de construcción: usado
Precio: used machinery auction RESALE 5.000 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 6500 x 1500 x 2500 mm<br/>description: anthropomorphic handling robot<br> serial number 2006013<br> 4 controlled axes<br> loading capacity 35 kg<br> operating radius approx. of 2500 mm<br> rotation approx. of 350 °<br> maximum travel distance approx. 6500 mm<br> brushless motors<br> numerical control with 17 color screen<br> iso programming language<br> total power 6 kw<br> ce standards WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 6500 X 1500 X 2500 MM
DESCRIPTION: ANTHROPOMORPHIC HANDLING ROBOT
SERIAL NUMBER 2006013
4 CONTROLLED AXES
LOADING CAPACITY 35 KG
OPERATING RADIUS APPROX. OF 2500 MM
ROTATION APPROX. OF 350 °
MAXIMUM TRAVEL DISTANCE APPROX. 6500 MM
BRUSHLESS MOTORS
NUMERICAL CONTROL WITH 17 COLOR SCREEN
ISO PROGRAMMING LANGUAGE
TOTAL POWER 6 KW
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control fanuc o-tc, feeder fmb minimag 3 m.
maximum rotating diameter. 12.7 mm
max speed 12000 rpm.
longitudinal stroke z 1 160 mm
rapid traverse 30 m / min.
maximum thrust force 125 dan
radial stroke x 1 85 mm
weight approx. 2 t
tool holder schlitten1: fixed tool holder 5
accessories: coolant system. CONTROL FANUC O-TC, FEEDER FMB MINIMAG 3 M. MAXIMUM ROTATING DIAMETER. 12.7 MM MAX SPEED 12000 RPM. LONGITUDINAL STROKE Z 1 160 MM RAPID TRAVERSE 30 M / MIN. MAXIMUM THRUST FORCE 125 DAN RADIAL STROKE X 1 85 MM WEIGHT APPROX. 2 T TOOL HOLDER SCHLITTEN1: FIXED TOOL HOLDER 5 ACCESSORIES: COOLANT SYSTEM.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 28.000 €
Ubicación: Land-weight approx.: 50000 kg<br/>dimensions (l x w x h) approx.: 5000 x 5000 x 3000 mm<br/>description: clansman dynamics c5010-e3s manipulator - vertical arm length 2000mm - horizontal arm lenght 2450mm - operating capacity 4000kg throughout envelope from 50 to 125 degrees and 5000 - 8000 kg from 62.5 to 112.5 degrees - speeds: slew 30 deg/sec. vertical 0.6 m/sec. horizontal 0,6 m/sec. - wrist w5000: capacity 7500 kg with grips vertical, 3000 kg for full 90 degree movement: yaw 145°, axis 5 (pitch) 90°, axis 6 (roll) 360° continous at 90°/sec - gripper g5000: payload 4000 kg, grip fource 12 ton, grip opening 0 - 2000 mm, throat depth 1000 mm - motor size 75 kw the manipulator is mounted on a carriage with pantograph and track. operation stationary is possible after conversion. it is possible to purchase the complete busbar and tracks. the manipulator must be disassembled into 3 parts for transport. WEIGHT APPROX.: 50000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 5000 X 3000 MM
DESCRIPTION: CLANSMAN DYNAMICS C5010-E3S MANIPULATOR - VERTICAL ARM LENGTH 2000MM - HORIZONTAL ARM LENGHT 2450MM - OPERATING CAPACITY 4000KG THROUGHOUT ENVELOPE FROM 50 TO 125 DEGREES AND 5000 - 8000 KG FROM 62.5 TO 112.5 DEGREES - SPEEDS: SLEW 30 DEG/SEC. VERTICAL 0.6 M/SEC. HORIZONTAL 0,6 M/SEC. - WRIST W5000: CAPACITY 7500 KG WITH GRIPS VERTICAL, 3000 KG FOR FULL 90 DEGREE MOVEMENT: YAW 145°, AXIS 5 (PITCH) 90°, AXIS 6 (ROLL) 360° CONTINOUS AT 90°/SEC - GRIPPER G5000: PAYLOAD 4000 KG, GRIP FOURCE 12 TON, GRIP OPENING 0 - 2000 MM, THROAT DEPTH 1000 MM - MOTOR SIZE 75 KW THE MANIPULATOR IS MOUNTED ON A CARRIAGE WITH PANTOGRAPH AND TRACK. OPERATION STATIONARY IS POSSIBLE AFTER CONVERSION. IT IS POSSIBLE TO PURCHASE THE COMPLETE BUSBAR AND TRACKS. THE MANIPULATOR MUST BE DISASSEMBLED INTO 3 PARTS FOR TRANSPORT.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
cnc multi-axis turning - milling center with portal machine's group: cnc turning and milling center
manufacturer: okuma
type: lt 25 m 2pcs 300 year of build: 1999
control: osp 7000 l with igf one touch
power-on hours: 80239 h
cutting time: 16516 h
country of origin: japan
delivery time: please enquire
cargo base: exw

technical data rotary diameter: 300 mm
turning length: 300 mm
control: osp 7000 l with igf one touch
distance between centers: 1524 mm
swing over bed: 500 mm

main spindle:

speed range - main spindle: 30-3800 u / min
drive power - main spindle: 22 kw
spindle bore: 65 mm part hollow voltage c-axis: 0.001 â°

counter spindle:

rpm - spindle: 30-3.000 u/min
drive performance - counter spindle: 22 kw
c-axis: 0.001 â°

turret:

number of turret: 2
number of tool stations: 2 x 12 positions
number of driven tool stations: 2 x 12 positions
speed range - angetr. number of tool stations: 50 â?? 4500 min-1
m power tools: 3,7 kw
max torque: 22.5 nm
chuck: vdi 40
total power consumption: 60.2 kva
machine weight approx.  : 13 t
space requirement approx.

additional features - chip conveyor

-coolant system with high pressure

-interface extraction system - interface for rod loader

-interface for portal

-renishaw measurement switch on upper turret for workpiece measuring - tool measuring 2 x (touch setter) manual

-automatic doors - preparation oil mist extraction - loading and enladeportal pneumotec with stack magazine psm 100 with safety fence

-separate measuring station - various tool holder + powered holder - 2 x hydraulic 3-jaw power chuck - chuck + measuring sensor blow with air - documentation 

 CNC MULTI-AXIS TURNING - MILLING CENTER WITH PORTAL MACHINE'S GROUP: CNC TURNING AND MILLING CENTER MANUFACTURER: OKUMA TYPE: LT 25 M 2PCS 300 YEAR OF BUILD: 1999 CONTROL: OSP 7000 L WITH IGF ONE TOUCH POWER-ON HOURS: 80239 H CUTTING TIME: 16516 H COUNTRY OF ORIGIN: JAPAN DELIVERY TIME: PLEASE ENQUIRE CARGO BASE: EXW TECHNICAL DATA ROTARY DIAMETER: 300 MM TURNING LENGTH: 300 MM CONTROL: OSP 7000 L WITH IGF ONE TOUCH DISTANCE BETWEEN CENTERS: 1524 MM SWING OVER BED: 500 MM MAIN SPINDLE: SPEED RANGE - MAIN SPINDLE: 30-3800 U / MIN DRIVE POWER - MAIN SPINDLE: 22 KW SPINDLE BORE: 65 MM PART HOLLOW VOLTAGE C-AXIS: 0.001 &ACIRC;&DEG; COUNTER SPINDLE: RPM - SPINDLE: 30-3.000 U/MIN DRIVE PERFORMANCE - COUNTER SPINDLE: 22 KW C-AXIS: 0.001 &ACIRC;&DEG; TURRET: NUMBER OF TURRET: 2 NUMBER OF TOOL STATIONS: 2 X 12 POSITIONS NUMBER OF DRIVEN TOOL STATIONS: 2 X 12 POSITIONS SPEED RANGE - ANGETR. NUMBER OF TOOL STATIONS: 50 &ACIRC;?? 4500 MIN-1 M POWER TOOLS: 3,7 KW MAX TORQUE: 22.5 NM CHUCK: VDI 40 TOTAL POWER CONSUMPTION: 60.2 KVA MACHINE WEIGHT APPROX. : 13 T SPACE REQUIREMENT APPROX. ADDITIONAL FEATURES - CHIP CONVEYOR -COOLANT SYSTEM WITH HIGH PRESSURE -INTERFACE EXTRACTION SYSTEM - INTERFACE FOR ROD LOADER -INTERFACE FOR PORTAL -RENISHAW MEASUREMENT SWITCH ON UPPER TURRET FOR WORKPIECE MEASURING - TOOL MEASURING 2 X (TOUCH SETTER) MANUAL -AUTOMATIC DOORS - PREPARATION OIL MIST EXTRACTION - LOADING AND ENLADEPORTAL PNEUMOTEC WITH STACK MAGAZINE PSM 100 WITH SAFETY FENCE -SEPARATE MEASURING STATION - VARIOUS TOOL HOLDER + POWERED HOLDER - 2 X HYDRAULIC 3-JAW POWER CHUCK - CHUCK + MEASURING SENSOR BLOW WITH AIR - DOCUMENTATION
Vendedor: RG-Tools GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 68 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: hettich blue max fs 8 drilling machine<br> serial number 2742<br> working table size 800 x 330 mm<br> 8 drilling spindles (3 + 5)<br> maximum drilling depth 13 mm<br> distance between spindles: 32 mm<br> 2 pneumatic clamps<br> motor power 1,6 kw<br> air pressure 6 bar<br> pedal operated<br> tools included WEIGHT APPROX.: 68 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: HETTICH BLUE MAX FS 8 DRILLING MACHINE
SERIAL NUMBER 2742
WORKING TABLE SIZE 800 X 330 MM
8 DRILLING SPINDLES (3 + 5)
MAXIMUM DRILLING DEPTH 13 MM
DISTANCE BETWEEN SPINDLES: 32 MM
2 PNEUMATIC CLAMPS
MOTOR POWER 1,6 KW
AIR PRESSURE 6 BAR
PEDAL OPERATED
TOOLS INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-iseki txg 23 a, compact tractor with choiceable four-wheel drive, 17.5 kw / 23 hp 3 cyl.-diesel engine water cooled, displacement 1123 cm, hydrostatic drive 2 levels up to 15 km/h with einpedalpedienung, differential lock, pto front, center, rear, front power lift with mounting triangle front and rear three point linkage cat. i, hydraulic control unit (cross trigger) - 2 hydraulic connections front and 2 hydra ulk connections rear, power steering. registration documents included. attachments are available.

- jodau local, environmental & green care technology -
pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...  ISEKI TXG 23 A, COMPACT TRACTOR WITH CHOICEABLE FOUR-WHEEL DRIVE, 17.5 KW / 23 HP 3 CYL.-DIESEL ENGINE WATER COOLED, DISPLACEMENT 1123 CM, HYDROSTATIC DRIVE 2 LEVELS UP TO 15 KM/H WITH EINPEDALPEDIENUNG, DIFFERENTIAL LOCK, PTO FRONT, CENTER, REAR, FRONT POWER LIFT WITH MOUNTING TRIANGLE FRONT AND REAR THREE POINT LINKAGE CAT. I, HYDRAULIC CONTROL UNIT (CROSS TRIGGER) - 2 HYDRAULIC CONNECTIONS FRONT AND 2 HYDRA ULK CONNECTIONS REAR, POWER STEERING. REGISTRATION DOCUMENTS INCLUDED. ATTACHMENTS ARE AVAILABLE. - JODAU LOCAL, ENVIRONMENTAL & GREEN CARE TECHNOLOGY - PRE-OWNED EQUIPMENT & SPORTS SQUARE CARE, GARDEN & LANDSCAPE CONSTRUCTION, CEMETERY TECHNOLOGY & WINTER MAINTENANCE, REVERSING OPERATIONS & DECOMMISSIONING, ENVIRONMENTAL CARE, MOTORS AND MORE...
Vendedor: JODAU - Kommunaltechnik
Año de construcción: usado
Precio: used machinery auction RESALE 3.400 €
Ubicación: Land-weight approx.: 625 kg<br/>dimensions (l x w x h) approx.: 2900 x 980 x 1500 mm<br/>description: berle automatic drill and hinge inserter<br> serial number 2106043<br> 2 drilling and insertion heads<br> minimum distance between heads 220 mm<br> maximum distance between heads 2200 mm<br> power of the drilling motors 1,5 kw - 2815 rpm<br> total installed power 3 kw<br> ce standards WEIGHT APPROX.: 625 KG
DIMENSIONS (L X W X H) APPROX.: 2900 X 980 X 1500 MM
DESCRIPTION: BERLE AUTOMATIC DRILL AND HINGE INSERTER
SERIAL NUMBER 2106043
2 DRILLING AND INSERTION HEADS
MINIMUM DISTANCE BETWEEN HEADS 220 MM
MAXIMUM DISTANCE BETWEEN HEADS 2200 MM
POWER OF THE DRILLING MOTORS 1,5 KW - 2815 RPM
TOTAL INSTALLED POWER 3 KW
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year built 2001
diameter rotation on the bar 420 mm 
diameter admitted on the sled 300 mm 
maximum distance between centers 500 mm
maximum turning diameter 200 mm 
bar capacity - diameter 51 mm 
spindle nose attack asa 2 - 6 YEAR BUILT 2001 DIAMETER ROTATION ON THE BAR 420 MM DIAMETER ADMITTED ON THE SLED 300 MM MAXIMUM DISTANCE BETWEEN CENTERS 500 MM MAXIMUM TURNING DIAMETER 200 MM BAR CAPACITY - DIAMETER 51 MM SPINDLE NOSE ATTACK ASA 2 - 6 " SPINDLE SPEEDS 25-4000 REV / MIN MOTOR POWER MAIN SPINDLE 9/11 KW 12 POSITIONS TURRET X AXIS TRAVEL 170 MM TRAVEL Z-AXIS 400 MM GROUP TAILSTOCK 350 MM TAILSTOCK QUILL STROKE 60 MM FANUC OT NET WEIGHT 5500 KG 3640X1850X2000 MM DIMENSIONS EVACUATOR CHIPS PRESETTING
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1400 x 700 x 2200 mm<br/>description: with 3 existing tool adapters, 1 for tool holders of 70/40 mm (cone), 1 of 105/60 mm (cone), 1 x item number 0301727, with zoller control 6050 and zoller quick reference manual. WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 700 X 2200 MM
DESCRIPTION: WITH 3 EXISTING TOOL ADAPTERS, 1 FOR TOOL HOLDERS OF 70/40 MM (CONE), 1 OF 105/60 MM (CONE), 1 X ITEM NUMBER 0301727, WITH ZOLLER CONTROL 6050 AND ZOLLER QUICK REFERENCE MANUAL.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-- powder booth: pbs variocolor 
- space powder booth b/t/h: 11 x 4 x 7 m
- powder guns: 3 automatic mast 
- manual spray guns: 2 pieces
- mast: 2 pcs. with size detection 
- workpiece size w x d x h: 1000 x (x) x 2500 mm 

- cyclone: pbs b/t/h 7/2/2 m 
- cyclone : with recovery 
- fire-fighting system: sts 
- final filter: level under powder booth 
- space final filter w/d/h: 11 x 8 x 2.5 m

details:
cabine, cyclone, powder centre, recovery, final filter (manufacturer pbs), application consisting of 6 automatic pistols and 2 hand pistols (manufacturer wagner), fire-fighting system (manufacturer sts)    - POWDER BOOTH: PBS VARIOCOLOR - SPACE POWDER BOOTH B/T/H: 11 X 4 X 7 M - POWDER GUNS: 3 AUTOMATIC MAST - MANUAL SPRAY GUNS: 2 PIECES - MAST: 2 PCS. WITH SIZE DETECTION - WORKPIECE SIZE W X D X H: 1000 X (X) X 2500 MM - CYCLONE: PBS B/T/H 7/2/2 M - CYCLONE : WITH RECOVERY - FIRE-FIGHTING SYSTEM: STS - FINAL FILTER: LEVEL UNDER POWDER BOOTH - SPACE FINAL FILTER W/D/H: 11 X 8 X 2.5 M DETAILS: CABINE, CYCLONE, POWDER CENTRE, RECOVERY, FINAL FILTER (MANUFACTURER PBS), APPLICATION CONSISTING OF 6 AUTOMATIC PISTOLS AND 2 HAND PISTOLS (MANUFACTURER WAGNER), FIRE-FIGHTING SYSTEM (MANUFACTURER STS)
Vendedor: Alfred Feldmann Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 8.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 2500 x 2200 x 2000 mm<br/>description: kunzmann wf 4/3 haidenhein milling machine<br> <br> travel x = 400 mm, y = 320 mm, z = 400 mm, distance spindle head to table edge max. 160 mm, distance spindle centre to table edge max. 320 mm, max. travel spindle length workpiece weight 250 kg, clamping surface 650 x 350 mm, number of grooves 5<br> <b>without machine vice</b> WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 2500 X 2200 X 2000 MM
DESCRIPTION: KUNZMANN WF 4/3 HAIDENHEIN MILLING MACHINE

TRAVEL X = 400 MM, Y = 320 MM, Z = 400 MM, DISTANCE SPINDLE HEAD TO TABLE EDGE MAX. 160 MM, DISTANCE SPINDLE CENTRE TO TABLE EDGE MAX. 320 MM, MAX. TRAVEL SPINDLE LENGTH WORKPIECE WEIGHT 250 KG, CLAMPING SURFACE 650 X 350 MM, NUMBER OF GROOVES 5
WITHOUT MACHINE VICE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.300 €
Ubicación: Land- we offer for sale:

pallet racks for 960 sites

manufacturer: euro stock

material:

19 uprights, approx. 6,200 x 1,000 mm

69 uprights, approx. 7,000 x 1,000 mm

480 traverses approximately 2,900 x k140 mm

960 pins 176 ground anchor m 12 mm

technical data:

frame elevation 6,200-7.000 mm

shelf depth 1000 mm

load range 933 kg

payload field 8,500 kg

payload specialist 2,800 kg

frame blue

beams blue

in stock: 21698 harsefeld

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983.  WE OFFER FOR SALE: PALLET RACKS FOR 960 SITES MANUFACTURER: EURO STOCK MATERIAL: 19 UPRIGHTS, APPROX. 6,200 X 1,000 MM 69 UPRIGHTS, APPROX. 7,000 X 1,000 MM 480 TRAVERSES APPROXIMATELY 2,900 X K140 MM 960 PINS 176 GROUND ANCHOR M 12 MM TECHNICAL DATA: FRAME ELEVATION 6,200-7.000 MM SHELF DEPTH 1000 MM LOAD RANGE 933 KG PAYLOAD FIELD 8,500 KG PAYLOAD SPECIALIST 2,800 KG FRAME BLUE BEAMS BLUE IN STOCK: 21698 HARSEFELD WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 1010 x 60 x 720 mm<br/>description: - maximum pressure 10bar<br> - motor power 7,5 kw<br> - motor speed 1125 u./min.<br> - delivery quantity 896 l/min<br> WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 1010 X 60 X 720 MM
DESCRIPTION: - MAXIMUM PRESSURE 10BAR
- MOTOR POWER 7,5 KW
- MOTOR SPEED 1125 U./MIN.
- DELIVERY QUANTITY 896 L/MIN
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)