28 ofertas

Año de construcción: usado
Ubicación: Land-falcon 2000 FALCON 2000
Vendedor: Iberus Woodworking Machinery
Año de construcción: usado
Precio: 21.900 €
Ubicación: Land-: 3.000x1.300 mm<br/>pressure: 90 t<br/>heating capacity: 22 kw<br/><br/><br/><br/><br/> : 3.000X1.300 MM
PRESSURE: 90 T
HEATING CAPACITY: 22 KW




Vendedor: Rauscher & Reyhing GmbH
Año de construcción: usado
Ubicación: Land-bar clamp  italpresse model falcon/2000 at ce norms.
- working sizes mm 3000x1700
- working cycle manual / semiautomatic / automatic
- temporizer of pressure cycle
- double regulation of hydraulic pressure (vertical and horizontal)
- hydraulic unit kw 3 , volt 380 BAR CLAMP ITALPRESSE MODEL FALCON/2000 AT CE NORMS. - WORKING SIZES MM 3000X1700 - WORKING CYCLE MANUAL / SEMIAUTOMATIC / AUTOMATIC - TEMPORIZER OF PRESSURE CYCLE - DOUBLE REGULATION OF HYDRAULIC PRESSURE (VERTICAL AND HORIZONTAL) - HYDRAULIC UNIT KW 3 , VOLT 380
Vendedor: Baldin SRL
Año de construcción: usado
Ubicación: Land-new hot press, hydraulically\r\nbrand: italpresse \r\ntype xl/6 30-13 pe\r\n\r\n- electrical - heating plates: 3000 x 1300 mm \r\n- total pressure: 120 to. \r\n- number of hot plates: 2 pc. \r\n- number of floors: 1 pc. \r\n- stroke: 350 mm \r\n- day light opening: 350 mm \r\n- all-round feeding \r\n- number of cylinders: 6 pc. \r\n- diameter of cylinder: 85 mm \r\n- power consumption (hydraulic unit): 3 kw\r\n- electric hot plates of solid hard aluminium with installed heating elements \r\n- heating power 22 kw \r\n- high pressure isolation plates  \r\n- operating temperature: 90° c. \r\n- max. temperature: 120° c. \r\n- supply: 400v/50 hz \r\n- safety accordance with ce standard \r\n\r\nstandard equipment:\r\n- movement of the press table with rack and pinion parallel guidance at two corners of the press table made from self-lubricating material \r\n- electronic control unit for controlling and monitoring the machine \r\n- digital timer for setting the pressing time and automatic opening \r\n- digital input and monitoring of the pressing pressure \r\n- timer for programming the starting time of heater\r\n- digital display of diagnosis and fault messages \r\n- safety circuit with two-hand control \r\n- emergency strip wire \r\n- safety holder for the lower press table \r\n\r\noptional for an extra charge:\r\n- opening / cylinder stroke 600 mm \r\n- electrical inactivation of the left cylinder bank \r\n- additional charge for ?gold-anodised? heating plates\r\n NEW HOT PRESS, HYDRAULICALLY\R\NBRAND: ITALPRESSE \R\NTYPE XL/6 30-13 PE\R\N\R\N- ELECTRICAL - HEATING PLATES: 3000 X 1300 MM \R\N- TOTAL PRESSURE: 120 TO. \R\N- NUMBER OF HOT PLATES: 2 PC. \R\N- NUMBER OF FLOORS: 1 PC. \R\N- STROKE: 350 MM \R\N- DAY LIGHT OPENING: 350 MM \R\N- ALL-ROUND FEEDING \R\N- NUMBER OF CYLINDERS: 6 PC. \R\N- DIAMETER OF CYLINDER: 85 MM \R\N- POWER CONSUMPTION (HYDRAULIC UNIT): 3 KW\R\N- ELECTRIC HOT PLATES OF SOLID HARD ALUMINIUM WITH INSTALLED HEATING ELEMENTS \R\N- HEATING POWER 22 KW \R\N- HIGH PRESSURE ISOLATION PLATES \R\N- OPERATING TEMPERATURE: 90° C. \R\N- MAX. TEMPERATURE: 120° C. \R\N- SUPPLY: 400V/50 HZ \R\N- SAFETY ACCORDANCE WITH CE STANDARD \R\N\R\NSTANDARD EQUIPMENT:\R\N- MOVEMENT OF THE PRESS TABLE WITH RACK AND PINION PARALLEL GUIDANCE AT TWO CORNERS OF THE PRESS TABLE MADE FROM SELF-LUBRICATING MATERIAL \R\N- ELECTRONIC CONTROL UNIT FOR CONTROLLING AND MONITORING THE MACHINE \R\N- DIGITAL TIMER FOR SETTING THE PRESSING TIME AND AUTOMATIC OPENING \R\N- DIGITAL INPUT AND MONITORING OF THE PRESSING PRESSURE \R\N- TIMER FOR PROGRAMMING THE STARTING TIME OF HEATER\R\N- DIGITAL DISPLAY OF DIAGNOSIS AND FAULT MESSAGES \R\N- SAFETY CIRCUIT WITH TWO-HAND CONTROL \R\N- EMERGENCY STRIP WIRE \R\N- SAFETY HOLDER FOR THE LOWER PRESS TABLE \R\N\R\NOPTIONAL FOR AN EXTRA CHARGE:\R\N- OPENING / CYLINDER STROKE 600 MM \R\N- ELECTRICAL INACTIVATION OF THE LEFT CYLINDER BANK \R\N- ADDITIONAL CHARGE FOR ?GOLD-ANODISED? HEATING PLATES\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 18.000 €
Ubicación: Land-italpresse brand 
model al300 
year 1974 
datasheet
horizontal die-casting press with loader and lubricator
closing power 350 ton
max injection power 40 ton
central extraction power 18 ton
height max. moulds 750 mm
minimum height of moulds 250 mm
moving plane stroke 500 mm 
central extraction stroke 130 mm
table dimensions 960x960 mm
distance within columns 580x580 mm 
motor power 18,5 kw
printable area max cm2 845 
metal pressure kg/cm2 400 
total weight of the press 14,8 ton 
overall dimensions 1450x6100x1900 h mm 
for more information contact us at 030 725026 or visit our website.
from monday to friday from 8:30 to 13:00 and from 14:00 to 19:00.
  ITALPRESSE BRAND MODEL AL300 YEAR 1974 DATASHEET HORIZONTAL DIE-CASTING PRESS WITH LOADER AND LUBRICATOR CLOSING POWER 350 TON MAX INJECTION POWER 40 TON CENTRAL EXTRACTION POWER 18 TON HEIGHT MAX. MOULDS 750 MM MINIMUM HEIGHT OF MOULDS 250 MM MOVING PLANE STROKE 500 MM CENTRAL EXTRACTION STROKE 130 MM TABLE DIMENSIONS 960X960 MM DISTANCE WITHIN COLUMNS 580X580 MM MOTOR POWER 18,5 KW PRINTABLE AREA MAX CM2 845 METAL PRESSURE KG/CM2 400 TOTAL WEIGHT OF THE PRESS 14,8 TON OVERALL DIMENSIONS 1450X6100X1900 H MM FOR MORE INFORMATION CONTACT US AT 030 725026 OR VISIT OUR WEBSITE. FROM MONDAY TO FRIDAY FROM 8:30 TO 13:00 AND FROM 14:00 TO 19:00.
Vendedor: Remarketin Way s.r.l,
Año de construcción: usado
Precio: used machinery auction RESALE 5.750 €
Ubicación: Land-weight approx.: 6000 kg<br/>dimensions (l x w x h) approx.: 4000 x 2100 x 2300 mm<br/>description: press area 3200 x 1600 mm, max. press opening 400 mm, 8 press cylinders diemeter appro. 80 mm, press force 160 t WEIGHT APPROX.: 6000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2100 X 2300 MM
DESCRIPTION: PRESS AREA 3200 X 1600 MM, MAX. PRESS OPENING 400 MM, 8 PRESS CYLINDERS DIEMETER APPRO. 80 MM, PRESS FORCE 160 T
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-hot press - italpresse scf 4
platens dimension 2500x1300 mm
opening stroke 400 mm
no. 4 cylinders diameter 80 mm
total vertical pressure 80 tons
4+2 side cylinders for blackboard panel processing
hydraulic pump motor power 3 hp
boiler not included  HOT PRESS - ITALPRESSE SCF 4 PLATENS DIMENSION 2500X1300 MM OPENING STROKE 400 MM NO. 4 CYLINDERS DIAMETER 80 MM TOTAL VERTICAL PRESSURE 80 TONS 4+2 SIDE CYLINDERS FOR BLACKBOARD PANEL PROCESSING HYDRAULIC PUMP MOTOR POWER 3 HP BOILER NOT INCLUDED
Vendedor: Artuso Trading & Tech s.r.l.
Año de construcción: usado
Precio: used machinery auction RESALE 380 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 3700 x 800 x 2700 mm<br/>description: ? hydraulic frame press, hydraulic frame clamp<br> ? serial number 50191291<br> ? max. workpiece dimensions approx. 3000 x 1300 mm<br> ? 2 vertical hydraulic pressure cylinders, diameter 60 mm<br> ? 2 horizontal hydraulic pressure cylinders, diameter 35 mm<br> ? hydraulic pump motor power 2.20 kw-1410 rpm WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 3700 X 800 X 2700 MM
DESCRIPTION: ? HYDRAULIC FRAME PRESS, HYDRAULIC FRAME CLAMP
? SERIAL NUMBER 50191291
? MAX. WORKPIECE DIMENSIONS APPROX. 3000 X 1300 MM
? 2 VERTICAL HYDRAULIC PRESSURE CYLINDERS, DIAMETER 60 MM
? 2 HORIZONTAL HYDRAULIC PRESSURE CYLINDERS, DIAMETER 35 MM
? HYDRAULIC PUMP MOTOR POWER 2.20 KW-1410 RPM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-code: 0492
brand: italpresse
model: r/4 - ce standard 

automatic glue spreader with 4 rollers - ce  standard

technical data: 
working lenght  mm 1400
max working thickness  mm 100
working speed  mt/min 22
n°2 varnishing rollers diameter mm 210  covered in syntetic rubber acid-proof   
n°2  dosing rollers  diameter mm 185  covered in ebonite 
automatic roller washing
safety protections
overall dimensions : mm 2100 x 1000 x 1550 h
weight kg 1000



 CODE: 0492 BRAND: ITALPRESSE MODEL: R/4 - CE STANDARD AUTOMATIC GLUE SPREADER WITH 4 ROLLERS - CE STANDARD TECHNICAL DATA: WORKING LENGHT MM 1400 MAX WORKING THICKNESS MM 100 WORKING SPEED MT/MIN 22 N°2 VARNISHING ROLLERS DIAMETER MM 210 COVERED IN SYNTETIC RUBBER ACID-PROOF N°2 DOSING ROLLERS DIAMETER MM 185 COVERED IN EBONITE AUTOMATIC ROLLER WASHING SAFETY PROTECTIONS OVERALL DIMENSIONS : MM 2100 X 1000 X 1550 H WEIGHT KG 1000
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: used machinery auction RESALE 420 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 3500 x 1000 x 2800 mm<br/>description: ? hydraulic frame press, hydraulic frame clamp<br> ? serial number 2562<br> ? max. workpiece dimensions approx. 2900 x 1750 mm<br> ? 3 vertical hydraulic pressure cylinders, diameter 30 mm<br> ? 2 horizontal hydraulic pressure cylinders, diameter 25 mm<br> ? hydraulic pump motor power 1.50 kw WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 1000 X 2800 MM
DESCRIPTION: ? HYDRAULIC FRAME PRESS, HYDRAULIC FRAME CLAMP
? SERIAL NUMBER 2562
? MAX. WORKPIECE DIMENSIONS APPROX. 2900 X 1750 MM
? 3 VERTICAL HYDRAULIC PRESSURE CYLINDERS, DIAMETER 30 MM
? 2 HORIZONTAL HYDRAULIC PRESSURE CYLINDERS, DIAMETER 25 MM
? HYDRAULIC PUMP MOTOR POWER 1.50 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-code: 0015
brand: italpresse
model: v/2

mechanical press for cold gluing

equipped with a motor that is operated by a switch with automatic return.
this switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press.
this system allows for maximum pressure with minimum effort
platen dimension mm 2500 x 1200
opening mm 650
pressure screw n°2
installed power hp 0,75
overall dimensions: mm 2850 x 1200 x 1650 h 
weight kg 880



    CODE: 0015 BRAND: ITALPRESSE MODEL: V/2 MECHANICAL PRESS FOR COLD GLUING EQUIPPED WITH A MOTOR THAT IS OPERATED BY A SWITCH WITH AUTOMATIC RETURN. THIS SWITCH CONTROLS THE MOVEMENTS OF THE MOBILE PLATEN TOWARDS OR AWAY FROM THE PANELS, WHILE THE REQUIRED PRESSURE AND THE RELEASE ARE CONTROLLED BY A HANDWHEEL, WHICH IS ON THE SIDE OF THE PRESS. THIS SYSTEM ALLOWS FOR MAXIMUM PRESSURE WITH MINIMUM EFFORT PLATEN DIMENSION MM 2500 X 1200 OPENING MM 650 PRESSURE SCREW N°2 INSTALLED POWER HP 0,75 OVERALL DIMENSIONS: MM 2850 X 1200 X 1650 H WEIGHT KG 880
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 3600 x 800 x 2400 mm<br/>description: ? hydraulic frame press, hydraulic frame clamp<br> ? serial number 24820988<br> ? max. workpiece dimensions approx. 3000 x 1300 mm<br> ? 2 vertical hydraulic pressure cylinders, diameter 40 mm<br> ? 2 horizontal hydraulic pressure cylinders, diameter 35 mm WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 3600 X 800 X 2400 MM
DESCRIPTION: ? HYDRAULIC FRAME PRESS, HYDRAULIC FRAME CLAMP
? SERIAL NUMBER 24820988
? MAX. WORKPIECE DIMENSIONS APPROX. 3000 X 1300 MM
? 2 VERTICAL HYDRAULIC PRESSURE CYLINDERS, DIAMETER 40 MM
? 2 HORIZONTAL HYDRAULIC PRESSURE CYLINDERS, DIAMETER 35 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-code: 0348
brand: italpresse
model: falcon/2000 - ce standard 

hydraulic clamp press for frames   - ce  standard 

usable working measurements:

max mm 3500 x 2500
min mm 250 x 340
total thrust tonn 19
control unit power  kw 3
stroke of vertical cylinders mm 1300
stroke of horizontal cylinders mm 1450
adjustable 3-position  supporting cross piece
mobile button panel
pressing timer 
bar with pins  for louvre windows
overall dimensions : mm 4300 x 1200 x 3300 h
weight kg 1850


   CODE: 0348 BRAND: ITALPRESSE MODEL: FALCON/2000 - CE STANDARD HYDRAULIC CLAMP PRESS FOR FRAMES - CE STANDARD USABLE WORKING MEASUREMENTS: MAX MM 3500 X 2500 MIN MM 250 X 340 TOTAL THRUST TONN 19 CONTROL UNIT POWER KW 3 STROKE OF VERTICAL CYLINDERS MM 1300 STROKE OF HORIZONTAL CYLINDERS MM 1450 ADJUSTABLE 3-POSITION SUPPORTING CROSS PIECE MOBILE BUTTON PANEL PRESSING TIMER BAR WITH PINS FOR LOUVRE WINDOWS OVERALL DIMENSIONS : MM 4300 X 1200 X 3300 H WEIGHT KG 1850
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: used machinery auction RESALE 1.400 €
Ubicación: Land-weight approx.: 2800 kg<br/>dimensions (l x w x h) approx.: 3500 x 2000 x 2100 mm<br/>description: hot press - italpresse scf/4<br> tabletops size 2500 x 1300 mm<br> 4+2 horizontal push cylinders<br> total push 80 tons<br> 4 vertical cylinders Ø 80 mm<br> control unit engine 3 kw (4 hp)<br> boiler not included WEIGHT APPROX.: 2800 KG
DIMENSIONS (L X W X H) APPROX.: 3500 X 2000 X 2100 MM
DESCRIPTION: HOT PRESS - ITALPRESSE SCF/4
TABLETOPS SIZE 2500 X 1300 MM
4+2 HORIZONTAL PUSH CYLINDERS
TOTAL PUSH 80 TONS
4 VERTICAL CYLINDERS Ø 80 MM
CONTROL UNIT ENGINE 3 KW (4 HP)
BOILER NOT INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pressing line italpresse mod. mark/c with 4500x1400 mm. worktop, diathermic oil heating, pressure 5 kg/cm, consisting of:-suction system for handling and loading goods
-motorized roller
-two-roller-spreading brand osama ce
-roll way from spreading
-conveyor for the press
-hot press with diathermic oil italpresse, brand
-unloading conveyor swing.
plant used. PRESSING LINE ITALPRESSE MOD. MARK/C WITH 4500X1400 MM. WORKTOP, DIATHERMIC OIL HEATING, PRESSURE 5 KG/CM, CONSISTING OF:-SUCTION SYSTEM FOR HANDLING AND LOADING GOODS -MOTORIZED ROLLER -TWO-ROLLER-SPREADING BRAND OSAMA CE -ROLL WAY FROM SPREADING -CONVEYOR FOR THE PRESS -HOT PRESS WITH DIATHERMIC OIL ITALPRESSE, BRAND -UNLOADING CONVEYOR SWING. PLANT USED.
Vendedor: Bi.Pa. s.r.l.
Año de construcción: usado
Ubicación: Land-platen sizes: 3 x 1,3 m.<br/>max. opening: 51 cm<br/>platens not heated<br/>4 upstroke rams, diam. 70 mm<br/>total pressure ca. 35 tons<br/>specific pressure on 80% of total surface ca. 1 kg/cm2 PLATEN SIZES: 3 X 1,3 M.
MAX. OPENING: 51 CM
PLATENS NOT HEATED
4 UPSTROKE RAMS, DIAM. 70 MM
TOTAL PRESSURE CA. 35 TONS
SPECIFIC PRESSURE ON 80% OF TOTAL SURFACE CA. 1 KG/CM2
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-heating plate press<br/>  <br/>  dimensions of 3000 x 1300 mm plates<br/>  number of heating plates 2<br/>  number of floors floor opening plate design 1<br/>  make of the electric hotplate hotplate buses-germany<br/>  consists of two components: a) aluminium electric heating plate b) iso printing plate.<br/>  both components are screwed together and can be replaced independently. the plates on the table are fastened back by spring-mounted hook bolts. this enables the trouble-free expansion of the aluminium heating plate and the press is this nailed and screw-free.<br/>  the aluminium heating plate consists of two special plan rolled aluminum plates, which are glued to tanzflaechig with each other.<br/>  <br/>  in the bottom aluminium plate is full bleed<br/>  a heating system incorporated.<br/>  the bottom aluminium plate thickness 6 mm<br/>  the upper aluminium deck plate thickness 3 mm<br/>  to the energy use efficiently to be able, is isolated by the iso - the pressure plate to the press table and the electric hot plate. still, the iso plate bridges the distances between of the individual modes of the press table to each other.<br/>  the iso printing plate consists of a waterproof solid panels and insulation<br/>  the waterproof solid plate thickness 38 mm<br/>  the insulation thickness 3 mm<br/>  heating system: electric heating wires<br/>  -heating system<br/>  the heating wire is often through special fibreglass and teflon insulation; new HEATING PLATE PRESS

DIMENSIONS OF 3000 X 1300 MM PLATES
NUMBER OF HEATING PLATES 2
NUMBER OF FLOORS FLOOR OPENING PLATE DESIGN 1
MAKE OF THE ELECTRIC HOTPLATE HOTPLATE BUSES-GERMANY
CONSISTS OF TWO COMPONENTS: A) ALUMINIUM ELECTRIC HEATING PLATE B) ISO PRINTING PLATE.
BOTH COMPONENTS ARE SCREWED TOGETHER AND CAN BE REPLACED INDEPENDENTLY. THE PLATES ON THE TABLE ARE FASTENED BACK BY SPRING-MOUNTED HOOK BOLTS. THIS ENABLES THE TROUBLE-FREE EXPANSION OF THE ALUMINIUM HEATING PLATE AND THE PRESS IS THIS NAILED AND SCREW-FREE.
THE ALUMINIUM HEATING PLATE CONSISTS OF TWO SPECIAL PLAN ROLLED ALUMINUM PLATES, WHICH ARE GLUED TO TANZFLAECHIG WITH EACH OTHER.

IN THE BOTTOM ALUMINIUM PLATE IS FULL BLEED
A HEATING SYSTEM INCORPORATED.
THE BOTTOM ALUMINIUM PLATE THICKNESS 6 MM
THE UPPER ALUMINIUM DECK PLATE THICKNESS 3 MM
TO THE ENERGY USE EFFICIENTLY TO BE ABLE, IS ISOLATED BY THE ISO - THE PRESSURE PLATE TO THE PRESS TABLE AND THE ELECTRIC HOT PLATE. STILL, THE ISO PLATE BRIDGES THE DISTANCES BETWEEN OF THE INDIVIDUAL MODES OF THE PRESS TABLE TO EACH OTHER.
THE ISO PRINTING PLATE CONSISTS OF A WATERPROOF SOLID PANELS AND INSULATION
THE WATERPROOF SOLID PLATE THICKNESS 38 MM
THE INSULATION THICKNESS 3 MM
HEATING SYSTEM: ELECTRIC HEATING WIRES
-HEATING SYSTEM
THE HEATING WIRE IS OFTEN THROUGH SPECIAL FIBREGLASS AND TEFLON INSULATION; NEW
Vendedor: PRATTES Maschinen-Handels GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 1 kg<br/>dimensions (l x w x h) approx.: 27200 x 2450 x 2600 mm<br/>description: <b>composite panel production line consisting of the components of the manufacturers laweco, tilleke, italpresse, kraft, ott, kuper <,/ b>,<br> <br>  <u>the machine is designed for the following parameters:</u><br> <br> - laminate size max. approx. 4250 x 1320 mm<br> - maximum plate size approx. 4200 x 1300 mm<br> - plate size at least approx. 2800 x 1300 mm<br> - panel thickness 8 - 38 mm<br> - laminate thickness approx. 0.8 mm<br> - laminate protrusion at least 5 mm per side<br> - stacking height for loading table: max. 600 mm including protective board<br> - stacking height for press throughput maximum 420 mm (equivalent to 20 plates a 19 mm thickness and cover layers)<br> <br>  <u>the machine consists of the following components (see also floor plan):</u><br> <br>  <u>pos 20 laweco lifting platform with driven roller conveyor</u><br> <br> - platform size: 1350 x 5000 mm<br> - stroke: 620 mm<br> - including two forklift recesses, medium size 940 mm<br> - capacity: 3 t<br> - operating pressure with hydraulic unit: 215 bar<br> - motor 400 volt, 50 hz: 1,1 kw<br> - with fixed, driven roller conveyor<br> - roll width: 1250 mm<br> - roll diameter: 90 mm<br> - geared motor 0.75 kw<br> <br>  <u>pos 30 tilleke brushing machine rh 1800</u><br> <br> - working width: 1800 mm<br> - working height 985 mm<br> - passage height: 50 mm<br> - with each 1 top and bottom brush rollers<br> - 2 motors 380 v, 50 hz: 2.5 kw<br> - infinitely variable feed rate: 0.55 kw<br> - 2 extractors on top, diameter: 150 mm<br> - 1 exhaust below, diameter: 150 mm<br> <br>    <u>pos 40 40 italpresse 4-roller glue application machine</u><br> <br> - for one and two-sided glue application<br> - roll length: 1400 mm<br> - application width: 1350 mm<br> - passage height approx. 80 mm<br> - 2 rubberized application rollers<br> - 2 metering rollers<br> - feed infinitely variable<br> - working height: approx. WEIGHT APPROX.: 1 KG
DIMENSIONS (L X W X H) APPROX.: 27200 X 2450 X 2600 MM
DESCRIPTION: COMPOSITE PANEL PRODUCTION LINE CONSISTING OF THE COMPONENTS OF THE MANUFACTURERS LAWECO, TILLEKE, ITALPRESSE, KRAFT, OTT, KUPER <,/ B>,

THE MACHINE IS DESIGNED FOR THE FOLLOWING PARAMETERS:

- LAMINATE SIZE MAX. APPROX. 4250 X 1320 MM
- MAXIMUM PLATE SIZE APPROX. 4200 X 1300 MM
- PLATE SIZE AT LEAST APPROX. 2800 X 1300 MM
- PANEL THICKNESS 8 - 38 MM
- LAMINATE THICKNESS APPROX. 0.8 MM
- LAMINATE PROTRUSION AT LEAST 5 MM PER SIDE
- STACKING HEIGHT FOR LOADING TABLE: MAX. 600 MM INCLUDING PROTECTIVE BOARD
- STACKING HEIGHT FOR PRESS THROUGHPUT MAXIMUM 420 MM (EQUIVALENT TO 20 PLATES A 19 MM THICKNESS AND COVER LAYERS)

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS (SEE ALSO FLOOR PLAN):

POS 20 LAWECO LIFTING PLATFORM WITH DRIVEN ROLLER CONVEYOR

- PLATFORM SIZE: 1350 X 5000 MM
- STROKE: 620 MM
- INCLUDING TWO FORKLIFT RECESSES, MEDIUM SIZE 940 MM
- CAPACITY: 3 T
- OPERATING PRESSURE WITH HYDRAULIC UNIT: 215 BAR
- MOTOR 400 VOLT, 50 HZ: 1,1 KW
- WITH FIXED, DRIVEN ROLLER CONVEYOR
- ROLL WIDTH: 1250 MM
- ROLL DIAMETER: 90 MM
- GEARED MOTOR 0.75 KW

POS 30 TILLEKE BRUSHING MACHINE RH 1800

- WORKING WIDTH: 1800 MM
- WORKING HEIGHT 985 MM
- PASSAGE HEIGHT: 50 MM
- WITH EACH 1 TOP AND BOTTOM BRUSH ROLLERS
- 2 MOTORS 380 V, 50 HZ: 2.5 KW
- INFINITELY VARIABLE FEED RATE: 0.55 KW
- 2 EXTRACTORS ON TOP, DIAMETER: 150 MM
- 1 EXHAUST BELOW, DIAMETER: 150 MM

POS 40 40 ITALPRESSE 4-ROLLER GLUE APPLICATION MACHINE

- FOR ONE AND TWO-SIDED GLUE APPLICATION
- ROLL LENGTH: 1400 MM
- APPLICATION WIDTH: 1350 MM
- PASSAGE HEIGHT APPROX. 80 MM
- 2 RUBBERIZED APPLICATION ROLLERS
- 2 METERING ROLLERS
- FEED INFINITELY VARIABLE
- WORKING HEIGHT: APPROX.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.800 €
Ubicación: Land-type sbh4x24
working length. max 4500mm
working height max 2800 mm
5 cylinders (3 from the top and 2 from the side)
made in italy
weight 2000 kg

 TYPE SBH4X24 WORKING LENGTH. MAX 4500MM WORKING HEIGHT MAX 2800 MM 5 CYLINDERS (3 FROM THE TOP AND 2 FROM THE SIDE) MADE IN ITALY WEIGHT 2000 KG
Vendedor: MEDIENOS STAKLES, UAB
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-rahmenverleimpresse \r\nfabrikat: italpresse\r\ntyp: sr/holt h\r\nbaujahr: 1977 RAHMENVERLEIMPRESSE \R\NFABRIKAT: ITALPRESSE\R\NTYP: SR/HOLT H\R\NBAUJAHR: 1977
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-calibrating sanding machine type italpresse sirio rkrt

max. working width mm. 1100
machine composed by n.02 belts ( 1 motor hp 15 ) :
1° belts : calibrating roller diam.mm.180 shore 80
2° belts : combi : roller + pad 
belt size mm.1150 x 1900
volt. 380/50
CALIBRATING SANDING MACHINE TYPE ITALPRESSE SIRIO RKRT MAX. WORKING WIDTH MM. 1100 MACHINE COMPOSED BY N.02 BELTS ( 1 MOTOR HP 15 ) : 1° BELTS : CALIBRATING ROLLER DIAM.MM.180 SHORE 80 2° BELTS : COMBI : ROLLER + PAD BELT SIZE MM.1150 X 1900 VOLT. 380/50
Vendedor: IMALL
Año de construcción: usado
Ubicación: Land-through-feed press\r\nmade: italpresse\r\ntyp: storm/s 14-30\r\nyear: 2007\r\n\r\n1. driven disc roller conveyor\r\ndimensions 1400x3000mm\r\n\r\n2. receipt and loading belt\r\ndimensions 1400x3500mm\r\n\r\n3. through-feed press\r\nplate dimensions: 1400x3000mm\r\n2 pcs. hot plates\r\nheating medium: thermal oil\r\ncylinder stroke and floor opening 140mm\r\nloading side 1400mm\r\n\r\nelectropneumatic vibrator of upper mylar foil\r\nelectronic flatness control\r\ncompressed air device in the lower press table\r\nelectric thermal oil boiler boiler 36 kw\r\n\r\n4: outfeed roller conveyor\r\ndimensions 1400x330mm\r\n\r\n\r\n note: \r\n the technical data and descriptions are copy of the order confirmation at that time. data is for information and is not binding. \r\n THROUGH-FEED PRESS\R\NMADE: ITALPRESSE\R\NTYP: STORM/S 14-30\R\NYEAR: 2007\R\N\R\N1. DRIVEN DISC ROLLER CONVEYOR\R\NDIMENSIONS 1400X3000MM\R\N\R\N2. RECEIPT AND LOADING BELT\R\NDIMENSIONS 1400X3500MM\R\N\R\N3. THROUGH-FEED PRESS\R\NPLATE DIMENSIONS: 1400X3000MM\R\N2 PCS. HOT PLATES\R\NHEATING MEDIUM: THERMAL OIL\R\NCYLINDER STROKE AND FLOOR OPENING 140MM\R\NLOADING SIDE 1400MM\R\N\R\NELECTROPNEUMATIC VIBRATOR OF UPPER MYLAR FOIL\R\NELECTRONIC FLATNESS CONTROL\R\NCOMPRESSED AIR DEVICE IN THE LOWER PRESS TABLE\R\NELECTRIC THERMAL OIL BOILER BOILER 36 KW\R\N\R\N4: OUTFEED ROLLER CONVEYOR\R\NDIMENSIONS 1400X330MM\R\N\R\N\R\N NOTE: \R\N THE TECHNICAL DATA AND DESCRIPTIONS ARE COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATA IS FOR INFORMATION AND IS NOT BINDING. \R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: italpresse, year: 2000, type: lock form ss air , work piece width min-max mm: 1330, min.-max. workpiece length in mm: 2680, min.-max. workpiece height in mm: 55, heating system: elektrisch, max. temperature °c: 150, placing table: 2, size of heating plate mm: 1450 x 2800, pin system: no, multifunktionsrahmen: yes, automatical glue supply: yes, year :2000 MANUFACTURER: ITALPRESSE, YEAR: 2000, TYPE: LOCK FORM SS AIR , WORK PIECE WIDTH MIN-MAX MM: 1330, MIN.-MAX. WORKPIECE LENGTH IN MM: 2680, MIN.-MAX. WORKPIECE HEIGHT IN MM: 55, HEATING SYSTEM: ELEKTRISCH, MAX. TEMPERATURE &DEG;C: 150, PLACING TABLE: 2, SIZE OF HEATING PLATE MM: 1450 X 2800, PIN SYSTEM: NO, MULTIFUNKTIONSRAHMEN: YES, AUTOMATICAL GLUE SUPPLY: YES, YEAR :2000
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: italpresse, year: 2002, type: lock form ss air , work piece width min-max mm: 1330, min.-max. workpiece length in mm: 2680, min.-max. workpiece height in mm: 55, heating system: elektrisch, max. temperature °c: 150, placing table: yes, size of heating plate mm: 1450 x 2800, pressing cylinder: 2, pin system: yes, automatical glue supply: yes, year :2002 MANUFACTURER: ITALPRESSE, YEAR: 2002, TYPE: LOCK FORM SS AIR , WORK PIECE WIDTH MIN-MAX MM: 1330, MIN.-MAX. WORKPIECE LENGTH IN MM: 2680, MIN.-MAX. WORKPIECE HEIGHT IN MM: 55, HEATING SYSTEM: ELEKTRISCH, MAX. TEMPERATURE &DEG;C: 150, PLACING TABLE: YES, SIZE OF HEATING PLATE MM: 1450 X 2800, PRESSING CYLINDER: 2, PIN SYSTEM: YES, AUTOMATICAL GLUE SUPPLY: YES, YEAR :2002
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: italpresse, year: 2005, type: lock form ss air , work piece width min-max mm: 1330, min.-max. workpiece length in mm: 2680, min.-max. workpiece height in mm: 55, heating system: elektrisch, max. temperature °c: 150, placing table: 2, size of heating plate mm: 1450 x 2800, pin system: no, multifunktionsrahmen: yes, automatical glue supply: yes, year :2005 MANUFACTURER: ITALPRESSE, YEAR: 2005, TYPE: LOCK FORM SS AIR , WORK PIECE WIDTH MIN-MAX MM: 1330, MIN.-MAX. WORKPIECE LENGTH IN MM: 2680, MIN.-MAX. WORKPIECE HEIGHT IN MM: 55, HEATING SYSTEM: ELEKTRISCH, MAX. TEMPERATURE &DEG;C: 150, PLACING TABLE: 2, SIZE OF HEATING PLATE MM: 1450 X 2800, PIN SYSTEM: NO, MULTIFUNKTIONSRAHMEN: YES, AUTOMATICAL GLUE SUPPLY: YES, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-technical data:press length: 1500 mmpress hight: 100 mmprocessing: pneumatic TECHNICAL DATA:PRESS LENGTH: 1500 MMPRESS HIGHT: 100 MMPROCESSING: PNEUMATIC
Vendedor: Mercator S.R.L.
Año de construcción: usado
Ubicación: Land-technical specifications:working width mm: 3000working height mm: 1500 TECHNICAL SPECIFICATIONS:WORKING WIDTH MM: 3000WORKING HEIGHT MM: 1500
Vendedor: Mercator S.R.L.
Año de construcción: usado
Ubicación: Land-technical specifications:working width mm: 3000working height mm: 1500 TECHNICAL SPECIFICATIONS:WORKING WIDTH MM: 3000WORKING HEIGHT MM: 1500
Vendedor: Mercator S.R.L.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)