13 ofertas

Año de construcción: usado
Ubicación: Land-the dsna coarse grinding machine is designed to demould the layer of wood on one side of the element in order to obtain a specific thickness and the corresponding surface roughness. to obtain straightness, the bottom surface of the element should be prepared on the planer.

the thickness of the planed layer and the feed speed depend on the width of the planed element and the desired surface smoothness.

the machine tool is designed only for working with central or individual sawdust extraction.

product description

the compact body of the welded construction guarantees good work of the mechanisms placed in it. top cover - openable enables quick and easy access to all points of adjustment and lubrication of knife and feed shaft subassembly mechanisms. the knife shaft is embedded in rolling bearings. the feed rollers are driven by a geared motor through a chain transmission. the cast iron machine table is guided in the vertical guides of the machine tool body.

the desired thickness of the workpiece is obtained by adjusting the table in relation to the knife shaft. to improve machine safety, the machine tool has: all rotating parts protected, anti-throw pawls to protect the machine from rejecting the workpiece. in addition, to increase safety during adjustment, sharpening and replacement of blades, the machine tool is equipped with a device that prevents turning on the machine tool when the top cover is open. the main drive motor has an electromechanical brake, which makes it possible to stop the machine quickly.

technical data

parameter dimension
bej8gnqj0y
maximum planing width mm 630
min. thickness of planed material mm 3
maximum thickness of planed material mm 250
the maximum thickness of the planed layer mm 6
the minimum length of the workpiece mm 330
cutting speed m / s 30
feed speed
- and

- ii

m / min
m / s
m / min
m / s
6
0.1
12
0.2
diameter of the suction stub of the chip suction mm 160
the speed of the air in the vacuum system m / s 24
air demand m3 / h 1750
main engine power kw 7.5
power of the motor thrust kw 0.8 / 1.1
lifting power kw 0.75
weight of the machine tool kg 1050
dimensions:
- length
- width
- height
mm
mm
mm
1200
1250
1180
attention! the choice of cutting parameters depends on the size of the workpiece and the quality requirements of the machining. THE DSNA COARSE GRINDING MACHINE IS DESIGNED TO DEMOULD THE LAYER OF WOOD ON ONE SIDE OF THE ELEMENT IN ORDER TO OBTAIN A SPECIFIC THICKNESS AND THE CORRESPONDING SURFACE ROUGHNESS. TO OBTAIN STRAIGHTNESS, THE BOTTOM SURFACE OF THE ELEMENT SHOULD BE PREPARED ON THE PLANER. THE THICKNESS OF THE PLANED LAYER AND THE FEED SPEED DEPEND ON THE WIDTH OF THE PLANED ELEMENT AND THE DESIRED SURFACE SMOOTHNESS. THE MACHINE TOOL IS DESIGNED ONLY FOR WORKING WITH CENTRAL OR INDIVIDUAL SAWDUST EXTRACTION. PRODUCT DESCRIPTION THE COMPACT BODY OF THE WELDED CONSTRUCTION GUARANTEES GOOD WORK OF THE MECHANISMS PLACED IN IT. TOP COVER - OPENABLE ENABLES QUICK AND EASY ACCESS TO ALL POINTS OF ADJUSTMENT AND LUBRICATION OF KNIFE AND FEED SHAFT SUBASSEMBLY MECHANISMS. THE KNIFE SHAFT IS EMBEDDED IN ROLLING BEARINGS. THE FEED ROLLERS ARE DRIVEN BY A GEARED MOTOR THROUGH A CHAIN TRANSMISSION. THE CAST IRON MACHINE TABLE IS GUIDED IN THE VERTICAL GUIDES OF THE MACHINE TOOL BODY. THE DESIRED THICKNESS OF THE WORKPIECE IS OBTAINED BY ADJUSTING THE TABLE IN RELATION TO THE KNIFE SHAFT. TO IMPROVE MACHINE SAFETY, THE MACHINE TOOL HAS: ALL ROTATING PARTS PROTECTED, ANTI-THROW PAWLS TO PROTECT THE MACHINE FROM REJECTING THE WORKPIECE. IN ADDITION, TO INCREASE SAFETY DURING ADJUSTMENT, SHARPENING AND REPLACEMENT OF BLADES, THE MACHINE TOOL IS EQUIPPED WITH A DEVICE THAT PREVENTS TURNING ON THE MACHINE TOOL WHEN THE TOP COVER IS OPEN. THE MAIN DRIVE MOTOR HAS AN ELECTROMECHANICAL BRAKE, WHICH MAKES IT POSSIBLE TO STOP THE MACHINE QUICKLY. TECHNICAL DATA PARAMETER DIMENSION BEJ8GNQJ0Y MAXIMUM PLANING WIDTH MM 630 MIN. THICKNESS OF PLANED MATERIAL MM 3 MAXIMUM THICKNESS OF PLANED MATERIAL MM 250 THE MAXIMUM THICKNESS OF THE PLANED LAYER MM 6 THE MINIMUM LENGTH OF THE WORKPIECE MM 330 CUTTING SPEED M / S 30 FEED SPEED - AND - II M / MIN M / S M / MIN M / S 6 0.1 12 0.2 DIAMETER OF THE SUCTION STUB OF THE CHIP SUCTION MM 160 THE SPEED OF THE AIR IN THE VACUUM SYSTEM M / S 24 AIR DEMAND M3 / H 1750 MAIN ENGINE POWER KW 7.5 POWER OF THE MOTOR THRUST KW 0.8 / 1.1 LIFTING POWER KW 0.75 WEIGHT OF THE MACHINE TOOL KG 1050 DIMENSIONS: - LENGTH - WIDTH - HEIGHT MM MM MM 1200 1250 1180 ATTENTION! THE CHOICE OF CUTTING PARAMETERS DEPENDS ON THE SIZE OF THE WORKPIECE AND THE QUALITY REQUIREMENTS OF THE MACHINING.
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-planer thicknesser triangular jarome dseb-40

-machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-working width 400 mm
-the height of the unilateral 200 mm
-trzystronnie height 100 mm

-main motor 4 kw
-the engine heads 2 x 4 kw
-height adjustment engine 0.37 kw
-feed motor 0.75 kw

-electrical height adjustment
-4 shaft with knives
– three upper shafts extending
-three shafts in the countertop

-three types of feed rate
-spindle diameter 30 mm
-full adjustment spindles
-nozzle diameter 1x200mm + 2x120mm

overall dimensions of the machine:

-length of 200 cm
-width 90 cm
-height 160 cm

-weight of ~ 900 kg PLANER THICKNESSER TRIANGULAR JAROME DSEB-40 -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -WORKING WIDTH 400 MM -THE HEIGHT OF THE UNILATERAL 200 MM -TRZYSTRONNIE HEIGHT 100 MM -MAIN MOTOR 4 KW -THE ENGINE HEADS 2 X 4 KW -HEIGHT ADJUSTMENT ENGINE 0.37 KW -FEED MOTOR 0.75 KW -ELECTRICAL HEIGHT ADJUSTMENT -4 SHAFT WITH KNIVES – THREE UPPER SHAFTS EXTENDING -THREE SHAFTS IN THE COUNTERTOP -THREE TYPES OF FEED RATE -SPINDLE DIAMETER 30 MM -FULL ADJUSTMENT SPINDLES -NOZZLE DIAMETER 1X200MM + 2X120MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH OF 200 CM -WIDTH 90 CM -HEIGHT 160 CM -WEIGHT OF ~ 900 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land--in stock
-after reviewing the technical
-concrete

technical parameters:

-shaft width 51 cm
-3-shaft with knives

-max workpiece thickness on grubo?ciówce 20 cm
-max workpiece thickness on the heads side 3-sided 8 cm

from:

-the catch
-introductory shaft gear, pulling
-pressure
-shaft strugaj?cy
-pressure
-outlet shaft smooth, pulling
-pressure

-engine 5, 5kw
-2 types of feed rate

* from the bottom:

-adjustable rollers in the lower countertop

* rear:

– the spindle side 2:
-spindle height 11 cm
-max spindle spacing 50 cm
-spindle diameter 30 mm

-adjusting the spindles right/left,
-skirting boards incorporate in countertop
-engine 2x3kw
-diameter exhaust-3x10cm

overall dimensions:

-h 56 -IN STOCK -AFTER REVIEWING THE TECHNICAL -CONCRETE TECHNICAL PARAMETERS: -SHAFT WIDTH 51 CM -3-SHAFT WITH KNIVES -MAX WORKPIECE THICKNESS ON GRUBO?CIóWCE 20 CM -MAX WORKPIECE THICKNESS ON THE HEADS SIDE 3-SIDED 8 CM FROM: -THE CATCH -INTRODUCTORY SHAFT GEAR, PULLING -PRESSURE -SHAFT STRUGAJ?CY -PRESSURE -OUTLET SHAFT SMOOTH, PULLING -PRESSURE -ENGINE 5, 5KW -2 TYPES OF FEED RATE * FROM THE BOTTOM: -ADJUSTABLE ROLLERS IN THE LOWER COUNTERTOP * REAR: – THE SPINDLE SIDE 2: -SPINDLE HEIGHT 11 CM -MAX SPINDLE SPACING 50 CM -SPINDLE DIAMETER 30 MM -ADJUSTING THE SPINDLES RIGHT/LEFT, -SKIRTING BOARDS INCORPORATE IN COUNTERTOP -ENGINE 2X3KW -DIAMETER EXHAUST-3X10CM OVERALL DIMENSIONS: -H 56 "LENGTH WIDTH 150 CM -HEIGHT 155 CM -WEIGHT 1070 KG PLANER TRIANGULAR TO MACHINING WOODEN ELEMENTS SIMULTANEOUSLY FROM THREE SIDES, GIVING SPECIFIC DIMENSIONS, SHAPES AND SMOOTH.
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-planer triangular kofama jarome 51

-in stock
-after reviewing the technical
-ideal for dry and wet wood

technical parameters:

-shaft width 51 cm
-4-shaft with knives

-max workpiece thickness on grubo?ciówce 20 cm
-max workpiece thickness on the heads side 3-sided 8 cm

from:

-the catch
-introductory shaft gear, pulling
-pressure

-shaft strugaj?cy
-pressure
-outlet shaft smooth, pulling
-pressure

-engine 5, 5kw
-2 types of feed rate

* from the bottom:

-adjustable rollers in the lower countertop

* rear:

– the spindle side 2:
-spindle height 13 cm
-max spindle spacing 50 cm
-spindle diameter 30 mm

-spindle adjustment left/right, up/down
-skirting boards incorporate in countertop
-engine 2x3kw
-diameter exhaust-3x10cm

overall dimensions:

-h 56 PLANER TRIANGULAR KOFAMA JAROME 51 -IN STOCK -AFTER REVIEWING THE TECHNICAL -IDEAL FOR DRY AND WET WOOD TECHNICAL PARAMETERS: -SHAFT WIDTH 51 CM -4-SHAFT WITH KNIVES -MAX WORKPIECE THICKNESS ON GRUBO?CIóWCE 20 CM -MAX WORKPIECE THICKNESS ON THE HEADS SIDE 3-SIDED 8 CM FROM: -THE CATCH -INTRODUCTORY SHAFT GEAR, PULLING -PRESSURE -SHAFT STRUGAJ?CY -PRESSURE -OUTLET SHAFT SMOOTH, PULLING -PRESSURE -ENGINE 5, 5KW -2 TYPES OF FEED RATE * FROM THE BOTTOM: -ADJUSTABLE ROLLERS IN THE LOWER COUNTERTOP * REAR: – THE SPINDLE SIDE 2: -SPINDLE HEIGHT 13 CM -MAX SPINDLE SPACING 50 CM -SPINDLE DIAMETER 30 MM -SPINDLE ADJUSTMENT LEFT/RIGHT, UP/DOWN -SKIRTING BOARDS INCORPORATE IN COUNTERTOP -ENGINE 2X3KW -DIAMETER EXHAUST-3X10CM OVERALL DIMENSIONS: -H 56 "LENGTH WIDTH 150 CM -HEIGHT 155 CM -WEIGHT 1070KG PLANER TRIANGULAR TO MACHINING WOODEN ELEMENTS SIMULTANEOUSLY FROM THREE SIDES, GIVING SPECIFIC DIMENSIONS, SHAPES AND SMOOTH.
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-surface planer jarome dsvc-40

-machine in stock
-after reviewing the technical
-production of polish

technical parameters:

-planing width 400 mm
maximum chip thickness 8 mm
-cutting speed m/s 29
-motor power 4 kw

-feeding table length 1640 mm
-the receiving table length 1250 mm
-the total length of the tables 2890 mm

-four knives
-shaft diameter 110 mm
-brake
-desktop

– setting the guide 0 SURFACE PLANER JAROME DSVC-40 -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -PRODUCTION OF POLISH TECHNICAL PARAMETERS: -PLANING WIDTH 400 MM MAXIMUM CHIP THICKNESS 8 MM -CUTTING SPEED M/S 29 -MOTOR POWER 4 KW -FEEDING TABLE LENGTH 1640 MM -THE RECEIVING TABLE LENGTH 1250 MM -THE TOTAL LENGTH OF THE TABLES 2890 MM -FOUR KNIVES -SHAFT DIAMETER 110 MM -BRAKE -DESKTOP – SETTING THE GUIDE 0 "-45" -DIMENSION GUIDE 1270 MM X 150 MM -DIAMETER MM 140 -THE MINIMUM AIR TRANSPORT SPEED M/S 19 -INTAKE AIR SAWDUST M3/H 1100 OVERALL DIMENSIONS -THE LENGTH OF THE 2950MM -WIDTH: 1300 MM -HEIGHT 1280 MM -WEIGHT 800 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-production machine polish jarome
-shaft width 410 mm
-4 knives

-the diameter of the cutterhead 125 mm

-table adjustable up/down

– maximum planing height 180 mm
-the length of the table tops 1950 mm
-two adjustable tops
-adjustable rollers in the lower countertop

-4 types of speed 7/10/14/20 m/min
-main motor 4 kw
-feed motor 1.5 kw

-drilling machine
-table top cross-430 mm x 230 mm
-eccentric clamp

overall dimensions:

-length of 200 cm
-width 130 cm
-height 120 cm
-weight 950kg

the main features of the machine:

* robust construction
* for both dry and wet wood
* production of polish reputable brand jarome-leader among manufacturers of planers
the commendable
* for each professional -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -PRODUCTION MACHINE POLISH JAROME -SHAFT WIDTH 410 MM -4 KNIVES -THE DIAMETER OF THE CUTTERHEAD 125 MM -TABLE ADJUSTABLE UP/DOWN – MAXIMUM PLANING HEIGHT 180 MM -THE LENGTH OF THE TABLE TOPS 1950 MM -TWO ADJUSTABLE TOPS -ADJUSTABLE ROLLERS IN THE LOWER COUNTERTOP -4 TYPES OF SPEED 7/10/14/20 M/MIN -MAIN MOTOR 4 KW -FEED MOTOR 1.5 KW -DRILLING MACHINE -TABLE TOP CROSS-430 MM X 230 MM -ECCENTRIC CLAMP OVERALL DIMENSIONS: -LENGTH OF 200 CM -WIDTH 130 CM -HEIGHT 120 CM -WEIGHT 950KG THE MAIN FEATURES OF THE MACHINE: * ROBUST CONSTRUCTION * FOR BOTH DRY AND WET WOOD * PRODUCTION OF POLISH REPUTABLE BRAND JAROME-LEADER AMONG MANUFACTURERS OF PLANERS THE COMMENDABLE * FOR EACH PROFESSIONAL
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-milling machine for jarome dfoa type-ii

-in stock
-production of polish
-year of manufacture 2004
-an unpainted

spindle dfoa-ii is designed for cutting of excess edge on workpiece thickness straight or curved.

zaokleinowany the side must be perpendicular to the surface, it can also be for 0-45 ° or rounded radius r 15 to 20.

the treatment is made by using the team shape cutters using the relevant part of the cutting edge of the blade.

to the routers, you can additionally install polishing towel snap-in designed for smoothing and snap-in is used for cutting off and zafrezowywania corners of the workpieces.

technical parameters:

-the cutter left Ø70xØ16 × 20
-cutter right Ø70xØ16 × 20

also included:

-truncate/mill
-corner cutter Ø78xØ15
-ball Ø160xØ30 × 3.2

-min. width 50 mm of the workpieces
-the thickness of the workpieces 16-40 mm
-thickness of edging 0.5-3 mm

-min. inner radius curved piece 90 mm
– max. the depth of the inner select 150 mm

-cutter speed 12000 ppm
-burnishing speed 1500 ppm
-rotational speed of the balls and corner cutter 3000/min

-supply voltage 3 x 400 v, 50 hz
-air working pressure 0.5 mpa

-squeegee diameter 60 mm
-intake air sawdust 250 m ³/h

dimensions unfolded:

-length of 1200 mm
width 850mm
-height 1350 mm

-weight 150 kg MILLING MACHINE FOR JAROME DFOA TYPE-II -IN STOCK -PRODUCTION OF POLISH -YEAR OF MANUFACTURE 2004 -AN UNPAINTED SPINDLE DFOA-II IS DESIGNED FOR CUTTING OF EXCESS EDGE ON WORKPIECE THICKNESS STRAIGHT OR CURVED. ZAOKLEINOWANY THE SIDE MUST BE PERPENDICULAR TO THE SURFACE, IT CAN ALSO BE FOR 0-45 ° OR ROUNDED RADIUS R 15 TO 20. THE TREATMENT IS MADE BY USING THE TEAM SHAPE CUTTERS USING THE RELEVANT PART OF THE CUTTING EDGE OF THE BLADE. TO THE ROUTERS, YOU CAN ADDITIONALLY INSTALL POLISHING TOWEL SNAP-IN DESIGNED FOR SMOOTHING AND SNAP-IN IS USED FOR CUTTING OFF AND ZAFREZOWYWANIA CORNERS OF THE WORKPIECES. TECHNICAL PARAMETERS: -THE CUTTER LEFT Ø70XØ16 × 20 -CUTTER RIGHT Ø70XØ16 × 20 ALSO INCLUDED: -TRUNCATE/MILL -CORNER CUTTER Ø78XØ15 -BALL Ø160XØ30 × 3.2 -MIN. WIDTH 50 MM OF THE WORKPIECES -THE THICKNESS OF THE WORKPIECES 16-40 MM -THICKNESS OF EDGING 0.5-3 MM -MIN. INNER RADIUS CURVED PIECE 90 MM – MAX. THE DEPTH OF THE INNER SELECT 150 MM -CUTTER SPEED 12000 PPM -BURNISHING SPEED 1500 PPM -ROTATIONAL SPEED OF THE BALLS AND CORNER CUTTER 3000/MIN -SUPPLY VOLTAGE 3 X 400 V, 50 HZ -AIR WORKING PRESSURE 0.5 MPA -SQUEEGEE DIAMETER 60 MM -INTAKE AIR SAWDUST 250 M ³/H DIMENSIONS UNFOLDED: -LENGTH OF 1200 MM WIDTH 850MM -HEIGHT 1350 MM -WEIGHT 150 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-thicknesser unilateral jaroma dsna 63
jarome producer
model / type of dsna 63 machine
production year 2005
category of machines thicknesser unilateral
location

gorzów wlkp.
conditions of delivery

own receipt
cost of delivery

customer cover
start type

to be agreed
description
comments

producer jaroma jarocin
model / type of dsna-63 machine
production year 2004
category of machines thicknesser, one-sided location

gorzów wlkp.
conditions of delivery

own receipt
cost of delivery

to be agreed
start type

to be agreed
description
comments

destiny

the dsna coarse grinding machine is designed to demould the layer of wood on one side of the element in order to obtain a specific thickness and the corresponding surface roughness. to obtain straightness, the bottom surface of the element should be prepared on the planer.

the thickness of the planed layer and the feed speed depend on the width of the planed element and the desired surface smoothness.

the machine tool is designed only for working with central or individual sawdust extraction.

product description

the compact body of the welded construction guarantees good work of the mechanisms placed in it. top cover - openable enables quick and easy access to all points of adjustment and lubrication of knife and feed shaft subassembly mechanisms. the knife shaft is embedded in rolling bearings. the feed rollers are driven by a geared motor through a chain transmission. the cast iron machine table is guided in the vertical guides of the machine tool body.

the desired thickness of the workpiece is obtained by adjusting the table in relation to the knife shaft. to improve machine safety, the machine tool has: all rotating parts protected, anti-throw pawls to protect the machine from rejecting the workpiece. in addition, to increase safety during adjustment, sharpening and replacement of blades, the machine tool is equipped with a device that prevents turning on the machine tool when the top cover is open. the main drive motor has an electromechanical brake, which makes it possible to stop the machine quickly.

technical data

parameter dimension
maximum planing width mm 630
min. thickness of planed material mm 3
maximum thickness of planed material mm 250
the maximum thickness of the planed layer mm 6
the minimum length of the workpiece mm 330
cutting speed m / s 30
feed speed
- and

- ii

m / min
m / s
m / min
m / s
6
0.1
12
0.2
diameter of the suction stub of the chip suction mm 160
the speed of the air in the vacuum system m / s 24
air demand m3 / h 1750
main engine power kw 7.5
power of the motor thrust kw 0.8 / 1.1
lifting power kw 0.75
weight of the machine tool kg 1050
dimensions:
- length
- width
- height
mm
mm
mm
1200
1250
1180
attention! the choice of cutting parameters depends on the size of the workpiece and the quality requirements of the machining. THICKNESSER UNILATERAL JAROMA DSNA 63 JAROME PRODUCER MODEL / TYPE OF DSNA 63 MACHINE PRODUCTION YEAR 2005 CATEGORY OF MACHINES THICKNESSER UNILATERAL LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN RECEIPT COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS PRODUCER JAROMA JAROCIN MODEL / TYPE OF DSNA-63 MACHINE PRODUCTION YEAR 2004 CATEGORY OF MACHINES THICKNESSER, ONE-SIDED LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN RECEIPT COST OF DELIVERY TO BE AGREED START TYPE TO BE AGREED DESCRIPTION COMMENTS DESTINY THE DSNA COARSE GRINDING MACHINE IS DESIGNED TO DEMOULD THE LAYER OF WOOD ON ONE SIDE OF THE ELEMENT IN ORDER TO OBTAIN A SPECIFIC THICKNESS AND THE CORRESPONDING SURFACE ROUGHNESS. TO OBTAIN STRAIGHTNESS, THE BOTTOM SURFACE OF THE ELEMENT SHOULD BE PREPARED ON THE PLANER. THE THICKNESS OF THE PLANED LAYER AND THE FEED SPEED DEPEND ON THE WIDTH OF THE PLANED ELEMENT AND THE DESIRED SURFACE SMOOTHNESS. THE MACHINE TOOL IS DESIGNED ONLY FOR WORKING WITH CENTRAL OR INDIVIDUAL SAWDUST EXTRACTION. PRODUCT DESCRIPTION THE COMPACT BODY OF THE WELDED CONSTRUCTION GUARANTEES GOOD WORK OF THE MECHANISMS PLACED IN IT. TOP COVER - OPENABLE ENABLES QUICK AND EASY ACCESS TO ALL POINTS OF ADJUSTMENT AND LUBRICATION OF KNIFE AND FEED SHAFT SUBASSEMBLY MECHANISMS. THE KNIFE SHAFT IS EMBEDDED IN ROLLING BEARINGS. THE FEED ROLLERS ARE DRIVEN BY A GEARED MOTOR THROUGH A CHAIN TRANSMISSION. THE CAST IRON MACHINE TABLE IS GUIDED IN THE VERTICAL GUIDES OF THE MACHINE TOOL BODY. THE DESIRED THICKNESS OF THE WORKPIECE IS OBTAINED BY ADJUSTING THE TABLE IN RELATION TO THE KNIFE SHAFT. TO IMPROVE MACHINE SAFETY, THE MACHINE TOOL HAS: ALL ROTATING PARTS PROTECTED, ANTI-THROW PAWLS TO PROTECT THE MACHINE FROM REJECTING THE WORKPIECE. IN ADDITION, TO INCREASE SAFETY DURING ADJUSTMENT, SHARPENING AND REPLACEMENT OF BLADES, THE MACHINE TOOL IS EQUIPPED WITH A DEVICE THAT PREVENTS TURNING ON THE MACHINE TOOL WHEN THE TOP COVER IS OPEN. THE MAIN DRIVE MOTOR HAS AN ELECTROMECHANICAL BRAKE, WHICH MAKES IT POSSIBLE TO STOP THE MACHINE QUICKLY. TECHNICAL DATA PARAMETER DIMENSION MAXIMUM PLANING WIDTH MM 630 MIN. THICKNESS OF PLANED MATERIAL MM 3 MAXIMUM THICKNESS OF PLANED MATERIAL MM 250 THE MAXIMUM THICKNESS OF THE PLANED LAYER MM 6 THE MINIMUM LENGTH OF THE WORKPIECE MM 330 CUTTING SPEED M / S 30 FEED SPEED - AND - II M / MIN M / S M / MIN M / S 6 0.1 12 0.2 DIAMETER OF THE SUCTION STUB OF THE CHIP SUCTION MM 160 THE SPEED OF THE AIR IN THE VACUUM SYSTEM M / S 24 AIR DEMAND M3 / H 1750 MAIN ENGINE POWER KW 7.5 POWER OF THE MOTOR THRUST KW 0.8 / 1.1 LIFTING POWER KW 0.75 WEIGHT OF THE MACHINE TOOL KG 1050 DIMENSIONS: - LENGTH - WIDTH - HEIGHT MM MM MM 1200 1250 1180 ATTENTION! THE CHOICE OF CUTTING PARAMETERS DEPENDS ON THE SIZE OF THE WORKPIECE AND THE QUALITY REQUIREMENTS OF THE MACHINING.
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-universal jaroma dckg edbander with premills 
jarome producer
model / machine type dckg
year of production 2007
machine category. one-sided edgebander

location

gorzów wlkp.
conditions of delivery

own receipt
cost of delivery

customer cover
start type

to be agreed
description
comments

the gckg edgebander is designed for unilateral banding of narrow furniture elements. in addition, the edge bander allows you to perform basic machining operations such as:

- cutting off the periphery at the front and the back of the element and the preliminary milling of the first two cutting station

- milling excess edging height

- removal of the corrugated surface created during milling (scraping) of the edges of pvc and abs

- milling (rounding) corners

- smoothing (polishing) the machined edges

the natural and plastic edgings that can be used for processing include: standotron, veneer, pvc / abs tape with a maximum thickness of 3 mm, wood elements with a maximum thickness of 5 mm (when machining wood attachments, cutters are not used to round the corners) .  UNIVERSAL JAROMA DCKG EDBANDER WITH PREMILLS JAROME PRODUCER MODEL / MACHINE TYPE DCKG YEAR OF PRODUCTION 2007 MACHINE CATEGORY. ONE-SIDED EDGEBANDER LOCATION GORZóW WLKP. CONDITIONS OF DELIVERY OWN RECEIPT COST OF DELIVERY CUSTOMER COVER START TYPE TO BE AGREED DESCRIPTION COMMENTS THE GCKG EDGEBANDER IS DESIGNED FOR UNILATERAL BANDING OF NARROW FURNITURE ELEMENTS. IN ADDITION, THE EDGE BANDER ALLOWS YOU TO PERFORM BASIC MACHINING OPERATIONS SUCH AS: - CUTTING OFF THE PERIPHERY AT THE FRONT AND THE BACK OF THE ELEMENT AND THE PRELIMINARY MILLING OF THE FIRST TWO CUTTING STATION - MILLING EXCESS EDGING HEIGHT - REMOVAL OF THE CORRUGATED SURFACE CREATED DURING MILLING (SCRAPING) OF THE EDGES OF PVC AND ABS - MILLING (ROUNDING) CORNERS - SMOOTHING (POLISHING) THE MACHINED EDGES THE NATURAL AND PLASTIC EDGINGS THAT CAN BE USED FOR PROCESSING INCLUDE: STANDOTRON, VENEER, PVC / ABS TAPE WITH A MAXIMUM THICKNESS OF 3 MM, WOOD ELEMENTS WITH A MAXIMUM THICKNESS OF 5 MM (WHEN MACHINING WOOD ATTACHMENTS, CUTTERS ARE NOT USED TO ROUND THE CORNERS) .
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-type: dsmb 63<br>used machine <br>working width: 630mm <br>maxworking height: 230mm <br>4-blade shaft <br>segmented platen <br>feed roller: steel<br>outfeed roller: steel<br>electrictable stroke<br>feed speeds: 7 / 14 min <br>power: 5,5kw <br>year of construction: 1985<br>location: warehouse / 82281 herrnzell TYPE: DSMB 63
USED MACHINE
WORKING WIDTH: 630MM
MAXWORKING HEIGHT: 230MM
4-BLADE SHAFT
SEGMENTED PLATEN
FEED ROLLER: STEEL
OUTFEED ROLLER: STEEL
ELECTRICTABLE STROKE
FEED SPEEDS: 7 / 14 MIN
POWER: 5,5KW
YEAR OF CONSTRUCTION: 1985
LOCATION: WAREHOUSE / 82281 HERRNZELL
Vendedor: Graf Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-slotting machine with side table jaroma

spindle moulder with side table jaroma dcsv + sp

     manufacturer: jaroma
     machine type: spindle moulder with side table
     model: dcsv + sp
     year of production: 1998
     net price
     vat

description

spindle moulder with replaceable spindle and trolley with pneumatic clamping   SLOTTING MACHINE WITH SIDE TABLE JAROMA SPINDLE MOULDER WITH SIDE TABLE JAROMA DCSV + SP MANUFACTURER: JAROMA MACHINE TYPE: SPINDLE MOULDER WITH SIDE TABLE MODEL: DCSV + SP YEAR OF PRODUCTION: 1998 NET PRICE VAT DESCRIPTION SPINDLE MOULDER WITH REPLACEABLE SPINDLE AND TROLLEY WITH PNEUMATIC CLAMPING
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-planer-thickness jaroma jarocin dykb-5, with drill

planer-thickness jaroma jarocin dykb-5, with drill

     manufacturer: jaroma jarocin
     machine type: planer-thicknesser
     model: dykb-5, with drill
     year of production: 1972
in addition, horizontal drill
engine power kw 5,5
after a major overhaul
perfect condition
cutting width mm 420
knife shaft 4
table length total 2200mm
cast iron body   PLANER-THICKNESS JAROMA JAROCIN DYKB-5, WITH DRILL PLANER-THICKNESS JAROMA JAROCIN DYKB-5, WITH DRILL MANUFACTURER: JAROMA JAROCIN MACHINE TYPE: PLANER-THICKNESSER MODEL: DYKB-5, WITH DRILL YEAR OF PRODUCTION: 1972 IN ADDITION, HORIZONTAL DRILL ENGINE POWER KW 5,5 AFTER A MAJOR OVERHAUL PERFECT CONDITION CUTTING WIDTH MM 420 KNIFE SHAFT 4 TABLE LENGTH TOTAL 2200MM CAST IRON BODY
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Precio: 4.350 €
Ubicación: Land-type dccd
min. workpiece width 70 mm
max. workpiece width 2000 mm
min. length of the workpiece 120 mm
workpiece thickness 10-40 mm
tape thickness 0,4-3 mm
feed rate 9 m/min
spindle moulder speed 12000 rev/min
polishing spindle speed 1500 rev/min
working air pressure 0,6 mpa
required amount of air 0,05 m3 / min
sucked air velocity 22 m / s
sucked air quantity 630 m3 / h
electricity consumption 4.2 kw
made in poland in 2007 y.
  TYPE DCCD MIN. WORKPIECE WIDTH 70 MM MAX. WORKPIECE WIDTH 2000 MM MIN. LENGTH OF THE WORKPIECE 120 MM WORKPIECE THICKNESS 10-40 MM TAPE THICKNESS 0,4-3 MM FEED RATE 9 M/MIN SPINDLE MOULDER SPEED 12000 REV/MIN POLISHING SPINDLE SPEED 1500 REV/MIN WORKING AIR PRESSURE 0,6 MPA REQUIRED AMOUNT OF AIR 0,05 M3 / MIN SUCKED AIR VELOCITY 22 M / S SUCKED AIR QUANTITY 630 M3 / H ELECTRICITY CONSUMPTION 4.2 KW MADE IN POLAND IN 2007 Y.
Vendedor: MEDIENOS STAKLES, UAB
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more JAROMA types: