16 ofertas

Año de construcción: usado
Precio: 159.000 €
Ubicación: Land-new-purchase 2013
condition near mint, not very much used

for removing gold from of electric scrap or other gold plated surfaces
complete process of detachment of the gold covering up the recovery by electrolysis

recycles in 1-shift operation approx. 1-ton boards per day
after saturation of the bath (contains about 5 kg of gold) the gold of  solution- liquid gets gained by electrolysis. the gold is then placed on copper plates NEW-PURCHASE 2013 CONDITION NEAR MINT, NOT VERY MUCH USED FOR REMOVING GOLD FROM OF ELECTRIC SCRAP OR OTHER GOLD PLATED SURFACES COMPLETE PROCESS OF DETACHMENT OF THE GOLD COVERING UP THE RECOVERY BY ELECTROLYSIS RECYCLES IN 1-SHIFT OPERATION APPROX. 1-TON BOARDS PER DAY AFTER SATURATION OF THE BATH (CONTAINS ABOUT 5 KG OF GOLD) THE GOLD OF SOLUTION- LIQUID GETS GAINED BY ELECTROLYSIS. THE GOLD IS THEN PLACED ON COPPER PLATES
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, type al 250 2d, no rvnl136780, new 2014, rotary valve , house material stainless steel , rotor material stainless steel , rotor diameter 250mm, rotor width 310mm, inlet dia.250mm, inlet flange sizes 406x250 stc.350, outlet dia.250mm, outlet flange sizes 406x250 stc.350, daylight 450mm, with motor 1.1 kw, 219-241/380-420volt, rotor speed 25 rpm, outer laying bearings , air purged sealings , capacity 19 ltr/rev, floorspace 1.2x0.6 m, total height 0.45 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, TYPE AL 250 2D, NO RVNL136780, NEW 2014, ROTARY VALVE , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 250MM, ROTOR WIDTH 310MM, INLET DIA.250MM, INLET FLANGE SIZES 406X250 STC.350, OUTLET DIA.250MM, OUTLET FLANGE SIZES 406X250 STC.350, DAYLIGHT 450MM, WITH MOTOR 1.1 KW, 219-241/380-420VOLT, ROTOR SPEED 25 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 19 LTR/REV, FLOORSPACE 1.2X0.6 M, TOTAL HEIGHT 0.45 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- year 1988
- arm capacity 25 ton 
- 3,700 hours of work
- electronic control unit for controlling the 4 stabilisers
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - YEAR 1988 - ARM CAPACITY 25 TON - 3,700 HOURS OF WORK - ELECTRONIC CONTROL UNIT FOR CONTROLLING THE 4 STABILISERS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, no 148765/2a 20dv ax, rotary valve for air transport , house material stainless steel , rotor material stainless steel , rotor diameter dia.175mm, rotor width 200mm, inlet dia.180, inlet flange sizes 315x175 stc.270mm, outlet dia.65mm, outlet flange sizes 140x65 stc.120mm, daylight 340mm, with motor 0.75 kw, 230/400volt, rotor speed 48 rpm, outer laying bearings , air purged sealings , capacity 5.5 ltr/rev, floorspace 1.1x0.35 m, total height 0.35 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, NO 148765/2A 20DV AX, ROTARY VALVE FOR AIR TRANSPORT , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER DIA.175MM, ROTOR WIDTH 200MM, INLET DIA.180, INLET FLANGE SIZES 315X175 STC.270MM, OUTLET DIA.65MM, OUTLET FLANGE SIZES 140X65 STC.120MM, DAYLIGHT 340MM, WITH MOTOR 0.75 KW, 230/400VOLT, ROTOR SPEED 48 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 5.5 LTR/REV, FLOORSPACE 1.1X0.35 M, TOTAL HEIGHT 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- abb transformers (3 units)
- magrini porcelain columns 130 kw (n. 2 units)
- porcelain wall passer
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18. MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - ABB TRANSFORMERS (3 UNITS) - MAGRINI PORCELAIN COLUMNS 130 KW (N. 2 UNITS) - PORCELAIN WALL PASSER MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, no 148765/2a 20dv ax, rotary valve for air transport , house material stainless steel , rotor material stainless steel , rotor diameter dia.175mm, rotor width 200mm, inlet dia.180mm, inlet flange sizes 315x175 stc,270mm, outlet dia.65mm, outlet flange sizes 140x65 stc.120mm, daylight 340mm, with motor 0.75 kw, 230/400volt, rotor speed 48 rpm, outer laying bearings , air purged sealings , capacity 5.5 ltr/rev, floorspace 1.1x0.35 m, total height 0.35 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, NO 148765/2A 20DV AX, ROTARY VALVE FOR AIR TRANSPORT , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER DIA.175MM, ROTOR WIDTH 200MM, INLET DIA.180MM, INLET FLANGE SIZES 315X175 STC,270MM, OUTLET DIA.65MM, OUTLET FLANGE SIZES 140X65 STC.120MM, DAYLIGHT 340MM, WITH MOTOR 0.75 KW, 230/400VOLT, ROTOR SPEED 48 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 5.5 LTR/REV, FLOORSPACE 1.1X0.35 M, TOTAL HEIGHT 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 3.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- about 1.100 m
- widths 1,000 mm and 900 mm
- thickness approx. 10 mm
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - ABOUT 1.100 M - WIDTHS 1,000 MM AND 900 MM - THICKNESS APPROX. 10 MM MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-make dmn-westinghouse, no 148765/2a 20dv ax, rotary valve for air transport , house material stainless steel , rotor material stainless steel , rotor diameter dia.175mm, rotor width 200mm, inlet dia.180mm, inlet flange sizes 315x175 stc.270mm, outlet dia.65mm, outlet flange sizes 140x65 stc.120mm, daylight 340mm, with motor 0.75 kw, 230/400volt, rotor speed 48 rpm, outer laying bearings , air purged sealings , capacity 5.5 ltr/rev, floorspace 1.1x0.35 m, total height 0.35 mrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE DMN-WESTINGHOUSE, NO 148765/2A 20DV AX, ROTARY VALVE FOR AIR TRANSPORT , HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER DIA.175MM, ROTOR WIDTH 200MM, INLET DIA.180MM, INLET FLANGE SIZES 315X175 STC.270MM, OUTLET DIA.65MM, OUTLET FLANGE SIZES 140X65 STC.120MM, DAYLIGHT 340MM, WITH MOTOR 0.75 KW, 230/400VOLT, ROTOR SPEED 48 RPM, OUTER LAYING BEARINGS , AIR PURGED SEALINGS , CAPACITY 5.5 LTR/REV, FLOORSPACE 1.1X0.35 M, TOTAL HEIGHT 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: selogica 

injection unit: 320 s/...
screw diameter: 22 mm 
injection pressure: 2320 bar 
injection volume: 30 ccm 
shot capacity: 25 g 

clamping unit: /500...
clamping force: 50 t 
platen size: 498 x 498 mm 
distance between tie bars: 320 x 320 mm 
mould height: 225 mm 
opening storke: 350 mm 
max.daylight: 575 mm 
ejector stroke: 125 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 3,1 x 1,2 x 1,8 m 
weight: 2250 kg  MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: SELOGICA INJECTION UNIT: 320 S/... SCREW DIAMETER: 22 MM INJECTION PRESSURE: 2320 BAR INJECTION VOLUME: 30 CCM SHOT CAPACITY: 25 G CLAMPING UNIT: /500... CLAMPING FORCE: 50 T PLATEN SIZE: 498 X 498 MM DISTANCE BETWEEN TIE BARS: 320 X 320 MM MOULD HEIGHT: 225 MM OPENING STORKE: 350 MM MAX.DAYLIGHT: 575 MM EJECTOR STROKE: 125 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,1 X 1,2 X 1,8 M WEIGHT: 2250 KG
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3500 mm<br/>stroke: 340 mm<br/>throat: 210 mm<br/>dayligth: 550 mm<br/>weight of the machine ca.: 16 t<br/>dimensions of the machine ca.:  4,00 x 2,40 x 3,18 m<br/>equipment:<br/>- control: dnc90<br/>- 2 movable support arms<br/>- central crowning<br/>- controlled axes: y1, y2, x, x1, z1, z2, r<br/>- upper tool about 3000mm, divided<br/>- block die 3000mm: v6, v32, v10, v36, v16, v24<br/><br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3500 MM
STROKE: 340 MM
THROAT: 210 MM
DAYLIGTH: 550 MM
WEIGHT OF THE MACHINE CA.: 16 T
DIMENSIONS OF THE MACHINE CA.: 4,00 X 2,40 X 3,18 M
EQUIPMENT:
- CONTROL: DNC90
- 2 MOVABLE SUPPORT ARMS
- CENTRAL CROWNING
- CONTROLLED AXES: Y1, Y2, X, X1, Z1, Z2, R
- UPPER TOOL ABOUT 3000MM, DIVIDED
- BLOCK DIE 3000MM: V6, V32, V10, V36, V16, V24





Vendedor: Frech GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 2005 
control unit: unilog b4 

injection unit: .../1330
screw diameter: 55 mm 
injection pressure: 2041 bar 
injection volume: 653 ccm 
shot capacity: 594 g 

clamping unit: hm 270/...
clamping force: 270 t 
platen size: 1020 x 940 mm 
distance between tie bars: 710 x 630 mm 
mould height: 350...650 mm 
opening storke: 425 mm 
max.daylight: 1150 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,7 x 2,4 x 2,2 m 
weight: 12.000 kg 

equipment:
- 2 x core pull on movable wap
- 1 x core pull on fixed wap
- 1 x pneumatic valve MACHINE SPECIFICATION YEAR: 2005 CONTROL UNIT: UNILOG B4 INJECTION UNIT: .../1330 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 2041 BAR INJECTION VOLUME: 653 CCM SHOT CAPACITY: 594 G CLAMPING UNIT: HM 270/... CLAMPING FORCE: 270 T PLATEN SIZE: 1020 X 940 MM DISTANCE BETWEEN TIE BARS: 710 X 630 MM MOULD HEIGHT: 350...650 MM OPENING STORKE: 425 MM MAX.DAYLIGHT: 1150 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,7 X 2,4 X 2,2 M WEIGHT: 12.000 KG EQUIPMENT: - 2 X CORE PULL ON MOVABLE WAP - 1 X CORE PULL ON FIXED WAP - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 2400 mm<br/>y-travel: 1250 mm<br/>z-travel: 1000 mm<br/>control: heidenhain <br/>type: tnc 426 <br/>dayligth: 1200 mm<br/>throat: 1370 mm<br/>table surface area: 4250x1250 mm<br/>workpiece weight: 12000 kg<br/>main drive: 30 kw<br/>spindle diameter: 130 mm<br/>turning speeds: 40-3150 u/min<br/>milling-head swivable   +/-: 45 °<br/>spindle taper iso: 50 <br/>total power requirement:  kw<br/>weight of the machine ca.: 50 t<br/>dimensions of the machine ca.: 5,52x9,26x4,7 m<br/><br/><br/><br/><br/> X-TRAVEL: 2400 MM
Y-TRAVEL: 1250 MM
Z-TRAVEL: 1000 MM
CONTROL: HEIDENHAIN
TYPE: TNC 426
DAYLIGTH: 1200 MM
THROAT: 1370 MM
TABLE SURFACE AREA: 4250X1250 MM
WORKPIECE WEIGHT: 12000 KG
MAIN DRIVE: 30 KW
SPINDLE DIAMETER: 130 MM
TURNING SPEEDS: 40-3150 U/MIN
MILLING-HEAD SWIVABLE +/-: 45 °
SPINDLE TAPER ISO: 50
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 50 T
DIMENSIONS OF THE MACHINE CA.: 5,52X9,26X4,7 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-ceiling lights and other electrical components certified atex
mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- atex ceiling lights (about 75 units)
- atex headlights (approx. 10 units)
- atex electrical components
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
 CEILING LIGHTS AND OTHER ELECTRICAL COMPONENTS CERTIFIED ATEX MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - ATEX CEILING LIGHTS (ABOUT 75 UNITS) - ATEX HEADLIGHTS (APPROX. 10 UNITS) - ATEX ELECTRICAL COMPONENTS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-pressure: 40 t<br/>chamfer lenght: 1250 mm<br/>distance between columns: 1050 mm<br/>column arm: 200 mm<br/>table width: 140 mm<br/>ram stroke max. - stepless: 100 mm/sec<br/>dayligth: 300 mm<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 2.000 kg.<br/>range l-w-h: 1,6 x 1,25 x 1,98 m<br/><br/><br/><br/><br/> PRESSURE: 40 T
CHAMFER LENGHT: 1250 MM
DISTANCE BETWEEN COLUMNS: 1050 MM
COLUMN ARM: 200 MM
TABLE WIDTH: 140 MM
RAM STROKE MAX. - STEPLESS: 100 MM/SEC
DAYLIGTH: 300 MM
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 2.000 KG.
RANGE L-W-H: 1,6 X 1,25 X 1,98 M




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
brand: westinghouse siemens
about 20 units
from 30 to 100 kw
1 from 400 kw
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18. MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. BRAND: WESTINGHOUSE SIEMENS ABOUT 20 UNITS FROM 30 TO 100 KW 1 FROM 400 KW MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-sheet width: 2020 mm<br/>plate thickness: 1,5 mm<br/>daylight opening: 100 mm<br/>bending angle: 135 °<br/>weight of the machine ca.: 1.300 kg<br/>dimensions of the machine ca.: 3000x800x1420 mm<br/><br/><br/><br/><br/> SHEET WIDTH: 2020 MM
PLATE THICKNESS: 1,5 MM
DAYLIGHT OPENING: 100 MM
BENDING ANGLE: 135 °
WEIGHT OF THE MACHINE CA.: 1.300 KG
DIMENSIONS OF THE MACHINE CA.: 3000X800X1420 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- nr. 6 large gearboxes (transmission ratio 1/14)
- nr. 3 medium size and others small size
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - NR. 6 LARGE GEARBOXES (TRANSMISSION RATIO 1/14) - NR. 3 MEDIUM SIZE AND OTHERS SMALL SIZE MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>chamfer lenght:3600 mm<br/>distance between columns:3050 mm<br/>arm length:300 mm<br/>table height:950 mm<br/>daylight opening:655 mm<br/>stroke:315 mm<br/>ajustment speed:125 mm/sec<br/>return speed:69 mm/sec<br/>working feed:10 mm/sec<br/>total power requirement:18,5 kw<br/>weight of the machine ca.:15,0 t<br/>dimensions of the machine ca.:5,0 x 2,1 x 3,2 m<br/><br/> PRESSURE:160 T
CHAMFER LENGHT:3600 MM
DISTANCE BETWEEN COLUMNS:3050 MM
ARM LENGTH:300 MM
TABLE HEIGHT:950 MM
DAYLIGHT OPENING:655 MM
STROKE:315 MM
AJUSTMENT SPEED:125 MM/SEC
RETURN SPEED:69 MM/SEC
WORKING FEED:10 MM/SEC
TOTAL POWER REQUIREMENT:18,5 KW
WEIGHT OF THE MACHINE CA.:15,0 T
DIMENSIONS OF THE MACHINE CA.:5,0 X 2,1 X 3,2 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-new or reconditioned disassembled pumps - gaskets and packing
mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- about 20 units' of various capacities
- 1 sea water immersion pump with spare parts
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18. NEW OR RECONDITIONED DISASSEMBLED PUMPS - GASKETS AND PACKING MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - ABOUT 20 UNITS' OF VARIOUS CAPACITIES - 1 SEA WATER IMMERSION PUMP WITH SPARE PARTS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-capacity: 8  brews/day<br />outcast wort: 150  hl<br />grist: 2500  kg  <br />operation / control:  control: not available anymore<br />equipment: mash tun, lauter tun, pre run vessel, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage<br />accessories: wet mill, lauter wort heater, vapor condenser, spent grain silo, cip, brew water tank, hot water tank<br /> CAPACITY: 8 BREWS/DAY
OUTCAST WORT: 150 HL
GRIST: 2500 KG
OPERATION / CONTROL: CONTROL: NOT AVAILABLE ANYMORE
EQUIPMENT: MASH TUN, LAUTER TUN, PRE RUN VESSEL, LOW PRESSURE COOKING WORT COPPER-WHIRLPOOL SYSTEM WITH EXTERNAL WORT BOILING SYSTEM, ADDITIONAL WHIRLPOOL, TRUB COLLECTING UNIT, HOP DOSAGE
ACCESSORIES: WET MILL, LAUTER WORT HEATER, VAPOR CONDENSER, SPENT GRAIN SILO, CIP, BREW WATER TANK, HOT WATER TANK
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-300 tons tie-bar-less imm built in 2008 with cc 200 control, integrated engel robot erc 33/2-f, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. plastizising screw bimetalic.

technical details	
daylight max	1.300 mm
min. mould hight	400 mm
year of building	2008
working hours	73506
injection pressure	1.616/2.053 bar
injection volumen	511 cm3
nominal capacity of pump motor	45 kw
travel opening	900 mm
screw diameter	55 mm
platen size	1.100 x 1.000 mm
clamping force	3.000 kn 300 TONS TIE-BAR-LESS IMM BUILT IN 2008 WITH CC 200 CONTROL, INTEGRATED ENGEL ROBOT ERC 33/2-F, CRANE FOR MOULD FIXING (2TONS), 16 HOT CHANEL, ACCUMULATOR FOR FAST INJECTION AND PARALLEL MOVEMENTS. 2 CORE PULLER FIX PLATEN, FLOW METER, TRANSPORT BELT. PLASTIZISING SCREW BIMETALIC. TECHNICAL DETAILS DAYLIGHT MAX 1.300 MM MIN. MOULD HIGHT 400 MM YEAR OF BUILDING 2008 WORKING HOURS 73506 INJECTION PRESSURE 1.616/2.053 BAR INJECTION VOLUMEN 511 CM3 NOMINAL CAPACITY OF PUMP MOTOR 45 KW TRAVEL OPENING 900 MM SCREW DIAMETER 55 MM PLATEN SIZE 1.100 X 1.000 MM CLAMPING FORCE 3.000 KN
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-veneer jointing guillotine, hydraulic\r\nbrand: casati\r\ntype: to/cc 3600\r\nnew machine\r\n\r\ntechnical data:\r\n\r\ncutting length: 3.600 mm\r\ndaylight opening of the clamping beam: 100 mm\r\nmax. rear feed width 800 mm\r\nmin. rear feed width 25 mm\r\nhydraulic unit motor power 10 ps\r\nrear feed motor power 0,5 ps\r\n\r\nequipped with:\r\n- motordriven feed of the back fence\r\n- cutting edge light\r\n- millimeter counter\r\n- manual and automatic working cycle. the operator can choose between: \r\nmanual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle)\r\n- hydraulic control valve of speed and pressure of knife beam and clamping beam\r\n- central system of lubrication\r\n- knife made with special steel\r\n- angular fence\r\n- photocells and guards as per ec rules\r\n\r\noptions for an extra charge\r\n- photo cells and guards per ec rules\r\n- absolute electron. read-out + partial read-out\r\n\r\nmachine is also available in cutting length:\r\n1.300, 1.450 , 2.600, 2.800, 3.200, 4.000, 4.400 mm\r\n VENEER JOINTING GUILLOTINE, HYDRAULIC\R\NBRAND: CASATI\R\NTYPE: TO/CC 3600\R\NNEW MACHINE\R\N\R\NTECHNICAL DATA:\R\N\R\NCUTTING LENGTH: 3.600 MM\R\NDAYLIGHT OPENING OF THE CLAMPING BEAM: 100 MM\R\NMAX. REAR FEED WIDTH 800 MM\R\NMIN. REAR FEED WIDTH 25 MM\R\NHYDRAULIC UNIT MOTOR POWER 10 PS\R\NREAR FEED MOTOR POWER 0,5 PS\R\N\R\NEQUIPPED WITH:\R\N- MOTORDRIVEN FEED OF THE BACK FENCE\R\N- CUTTING EDGE LIGHT\R\N- MILLIMETER COUNTER\R\N- MANUAL AND AUTOMATIC WORKING CYCLE. THE OPERATOR CAN CHOOSE BETWEEN: \R\NMANUAL WORKING CYCLE (SEPARATED CONTROLS FOR EACH PHASE OF THE WORKING CYCLE) OR AUTOMATIC WORKING CYCLE (ONE ONLY PUSH-BUTTON CONTROL FOR THE WHOLE CYCLE)\R\N- HYDRAULIC CONTROL VALVE OF SPEED AND PRESSURE OF KNIFE BEAM AND CLAMPING BEAM\R\N- CENTRAL SYSTEM OF LUBRICATION\R\N- KNIFE MADE WITH SPECIAL STEEL\R\N- ANGULAR FENCE\R\N- PHOTOCELLS AND GUARDS AS PER EC RULES\R\N\R\NOPTIONS FOR AN EXTRA CHARGE\R\N- PHOTO CELLS AND GUARDS PER EC RULES\R\N- ABSOLUTE ELECTRON. READ-OUT + PARTIAL READ-OUT\R\N\R\NMACHINE IS ALSO AVAILABLE IN CUTTING LENGTH:\R\N1.300, 1.450 , 2.600, 2.800, 3.200, 4.000, 4.400 MM\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- about 50 units
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - ABOUT 50 UNITS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-new hot press, hydraulically\r\nbrand: italpresse \r\ntype xl/6 30-13 pe\r\n\r\n- electrical - heating plates: 3000 x 1300 mm \r\n- total pressure: 120 to. \r\n- number of hot plates: 2 pc. \r\n- number of floors: 1 pc. \r\n- stroke: 350 mm \r\n- day light opening: 350 mm \r\n- all-round feeding \r\n- number of cylinders: 6 pc. \r\n- diameter of cylinder: 85 mm \r\n- power consumption (hydraulic unit): 3 kw\r\n- electric hot plates of solid hard aluminium with installed heating elements \r\n- heating power 22 kw \r\n- high pressure isolation plates  \r\n- operating temperature: 90° c. \r\n- max. temperature: 120° c. \r\n- supply: 400v/50 hz \r\n- safety accordance with ce standard \r\n\r\nstandard equipment:\r\n- movement of the press table with rack and pinion parallel guidance at two corners of the press table made from self-lubricating material \r\n- electronic control unit for controlling and monitoring the machine \r\n- digital timer for setting the pressing time and automatic opening \r\n- digital input and monitoring of the pressing pressure \r\n- timer for programming the starting time of heater\r\n- digital display of diagnosis and fault messages \r\n- safety circuit with two-hand control \r\n- emergency strip wire \r\n- safety holder for the lower press table \r\n\r\noptional for an extra charge:\r\n- opening / cylinder stroke 600 mm \r\n- electrical inactivation of the left cylinder bank \r\n- additional charge for ?gold-anodised? heating plates\r\n NEW HOT PRESS, HYDRAULICALLY\R\NBRAND: ITALPRESSE \R\NTYPE XL/6 30-13 PE\R\N\R\N- ELECTRICAL - HEATING PLATES: 3000 X 1300 MM \R\N- TOTAL PRESSURE: 120 TO. \R\N- NUMBER OF HOT PLATES: 2 PC. \R\N- NUMBER OF FLOORS: 1 PC. \R\N- STROKE: 350 MM \R\N- DAY LIGHT OPENING: 350 MM \R\N- ALL-ROUND FEEDING \R\N- NUMBER OF CYLINDERS: 6 PC. \R\N- DIAMETER OF CYLINDER: 85 MM \R\N- POWER CONSUMPTION (HYDRAULIC UNIT): 3 KW\R\N- ELECTRIC HOT PLATES OF SOLID HARD ALUMINIUM WITH INSTALLED HEATING ELEMENTS \R\N- HEATING POWER 22 KW \R\N- HIGH PRESSURE ISOLATION PLATES \R\N- OPERATING TEMPERATURE: 90° C. \R\N- MAX. TEMPERATURE: 120° C. \R\N- SUPPLY: 400V/50 HZ \R\N- SAFETY ACCORDANCE WITH CE STANDARD \R\N\R\NSTANDARD EQUIPMENT:\R\N- MOVEMENT OF THE PRESS TABLE WITH RACK AND PINION PARALLEL GUIDANCE AT TWO CORNERS OF THE PRESS TABLE MADE FROM SELF-LUBRICATING MATERIAL \R\N- ELECTRONIC CONTROL UNIT FOR CONTROLLING AND MONITORING THE MACHINE \R\N- DIGITAL TIMER FOR SETTING THE PRESSING TIME AND AUTOMATIC OPENING \R\N- DIGITAL INPUT AND MONITORING OF THE PRESSING PRESSURE \R\N- TIMER FOR PROGRAMMING THE STARTING TIME OF HEATER\R\N- DIGITAL DISPLAY OF DIAGNOSIS AND FAULT MESSAGES \R\N- SAFETY CIRCUIT WITH TWO-HAND CONTROL \R\N- EMERGENCY STRIP WIRE \R\N- SAFETY HOLDER FOR THE LOWER PRESS TABLE \R\N\R\NOPTIONAL FOR AN EXTRA CHARGE:\R\N- OPENING / CYLINDER STROKE 600 MM \R\N- ELECTRICAL INACTIVATION OF THE LEFT CYLINDER BANK \R\N- ADDITIONAL CHARGE FOR ?GOLD-ANODISED? HEATING PLATES\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 4.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- pneumatic valves
- electric valves
- larger manual valves 2 MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - PNEUMATIC VALVES - ELECTRIC VALVES - LARGER MANUAL VALVES 2" UP TO ABOUT 10" (OF WHICH ABOUT 30 ARE LIST900 STEEL VALVES) - SPARE PARTS FOR VALVES - SAFETY VALVES MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-sheet width: 1030 mm<br/>plate thickness: 3,0 mm<br/>daylight opening:  mm<br/>total power requirement: 2,0 kva<br/>control: pos 400 <br/>weight: 1.010 kg<br/>dimensions: 2.000x1.500x1.633 mm<br/><br/><br/><br/><br/> SHEET WIDTH: 1030 MM
PLATE THICKNESS: 3,0 MM
DAYLIGHT OPENING: MM
TOTAL POWER REQUIREMENT: 2,0 KVA
CONTROL: POS 400
WEIGHT: 1.010 KG
DIMENSIONS: 2.000X1.500X1.633 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
about 15 coils of unipolar single braided electric cables with different sections (from 20 mm² to 200 mm²)
also present optical fiber
see photos for details
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. ABOUT 15 COILS OF UNIPOLAR SINGLE BRAIDED ELECTRIC CABLES WITH DIFFERENT SECTIONS (FROM 20 MM² TO 200 MM²) ALSO PRESENT OPTICAL FIBER SEE PHOTOS FOR DETAILS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), floorspace 0,8x0,5 m, total height 0,5 m, weight 120 kg, rotary valve (1x), house material stainless steel , rotor material stainless steel , rotor diameter 320mm, rotor width 280mm, inlet 250x290mm, inlet flange sizes 305x350mm, outlet dia. 250mm, daylight 450mm, with motor ± 0,55 kwrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), FLOORSPACE 0,8X0,5 M, TOTAL HEIGHT 0,5 M, WEIGHT 120 KG, ROTARY VALVE (1X), HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 320MM, ROTOR WIDTH 280MM, INLET 250X290MM, INLET FLANGE SIZES 305X350MM, OUTLET DIA. 250MM, DAYLIGHT 450MM, WITH MOTOR ± 0,55 KWROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
cantilever mesct3. 
load capacity: 65.500 kg
excluding shelves with reels
metalsistem shelving, year 2008
shoulder capacity: dan 14000
shelf load capacity: 2000 kg
the withdrawal can be made only after the removal of the material above.
many lots will be on sale, a complete catalogue of which is published on our website or you can contact us at 030 7751645 during office hours 9-13, 14:18.
 MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. CANTILEVER MESCT3. LOAD CAPACITY: 65.500 KG EXCLUDING SHELVES WITH REELS METALSISTEM SHELVING, YEAR 2008 SHOULDER CAPACITY: DAN 14000 SHELF LOAD CAPACITY: 2000 KG THE WITHDRAWAL CAN BE MADE ONLY AFTER THE REMOVAL OF THE MATERIAL ABOVE. MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR YOU CAN CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), floorspace 0,8x0,5 m, total height 0,5 m, weight 120 kg, rotary valve (1x), house material stainless steel , rotor material stainless steel , rotor diameter 320mm, rotor width 280mm, inlet 250x290mm, inlet flange sizes 305x350mm, outlet dia. 250mm, daylight 450mm, with motor ± 0,55 kwrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), FLOORSPACE 0,8X0,5 M, TOTAL HEIGHT 0,5 M, WEIGHT 120 KG, ROTARY VALVE (1X), HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 320MM, ROTOR WIDTH 280MM, INLET 250X290MM, INLET FLANGE SIZES 305X350MM, OUTLET DIA. 250MM, DAYLIGHT 450MM, WITH MOTOR ± 0,55 KWROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-diesel generator power plant 106 mw with wartsila 7x18v46 hfo
 
this 106 mw power plant was delivered by wartsila in year 2000, operation started in 2001 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated from 50700 to 69000 hours in base load power production this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works are carried out strictly in accordance with wartsila manuals, 60 000 hour maintenance is carried out to 3 units. no any unexpected breakdowns has happened. delivery contains complete functioning power plant with 110 kv switchyard, buildings and day tank yard. power plant is currently in standby mode, in excellent condition it has all service records and complete original documentation available at site.
 
main plant characteristics at current site conditions:
 
net power output at site: 106 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
shaft output: iso 16 290 kwm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
 
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c
internal electric consump: 2.5 % at full load, up to 4% at low load   DIESEL GENERATOR POWER PLANT 106 MW WITH WARTSILA 7X18V46 HFO THIS 106 MW POWER PLANT WAS DELIVERED BY WARTSILA IN YEAR 2000, OPERATION STARTED IN 2001 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED FROM 50700 TO 69000 HOURS IN BASE LOAD POWER PRODUCTION THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS ARE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS, 60 000 HOUR MAINTENANCE IS CARRIED OUT TO 3 UNITS. NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT WITH 110 KV SWITCHYARD, BUILDINGS AND DAY TANK YARD. POWER PLANT IS CURRENTLY IN STANDBY MODE, IN EXCELLENT CONDITION IT HAS ALL SERVICE RECORDS AND COMPLETE ORIGINAL DOCUMENTATION AVAILABLE AT SITE. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: NET POWER OUTPUT AT SITE: 106 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM SHAFT OUTPUT: ISO 16 290 KWM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C INTERNAL ELECTRIC CONSUMP: 2.5 % AT FULL LOAD, UP TO 4% AT LOW LOAD
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), floorspace 0,8x0,5 m, total height 0,5 m, weight 120 kg, rotary valve (1x), house material stainless steel , rotor material stainless steel , rotor diameter 320mm, rotor width 280mm, inlet 250x290mm, inlet flange sizes 305x350mm, outlet dia. 250mm, daylight 450mm, with motor ± 0,55 kwrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), FLOORSPACE 0,8X0,5 M, TOTAL HEIGHT 0,5 M, WEIGHT 120 KG, ROTARY VALVE (1X), HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 320MM, ROTOR WIDTH 280MM, INLET 250X290MM, INLET FLANGE SIZES 305X350MM, OUTLET DIA. 250MM, DAYLIGHT 450MM, WITH MOTOR ± 0,55 KWROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products   INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make unknown, manufacturer plate is missing, floorspace 0,8x0,7 m, total height 0,5 m, extra specifications - housing jacketed (working pressure unknown) , rotary valve (1x), house material stainless steel , rotor material stainless steel , rotor diameter 200mm, rotor width 170mm, lock depth 10mm, inlet 185x110mm, inlet flange sizes 280x200mm, daylight 385mm, with motor 0,55 kw, 230/400 voltrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, MANUFACTURER PLATE IS MISSING, FLOORSPACE 0,8X0,7 M, TOTAL HEIGHT 0,5 M, EXTRA SPECIFICATIONS - HOUSING JACKETED (WORKING PRESSURE UNKNOWN) , ROTARY VALVE (1X), HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 200MM, ROTOR WIDTH 170MM, LOCK DEPTH 10MM, INLET 185X110MM, INLET FLANGE SIZES 280X200MM, DAYLIGHT 385MM, WITH MOTOR 0,55 KW, 230/400 VOLTROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-wrap-around labeling machine krones canmatic 960-28 52800 bph

this machine was installed in 2005 and it is still running and available in september 2016. total running hours today being around 40 000. the labeler is currently working with 0.5, 0.6 and 1.5 liter pet bottles with pre-cut wrap-around polypropylene labels. label material is polypropylene which was attached with two stripes of hot glue on both end of the label. labeler has one precut label feeding station and two hot glue stations and 28 container stations. container rotating is made with teethed plastic belt.

technical data
machine manufacturer: krones ag
manufacturer's type: canmatic 960 - 28
year of manufacturing: 2005
operating hours approx 40 000
label type polypropylene, wrap-around
container table pitch 960 mm
number of container tables 28
glue hot glue, leading and trailing edge gluing
rated output: 52800 bph
alignment: parallel arrangement
electric power 460 v / 60 hz   WRAP-AROUND LABELING MACHINE KRONES CANMATIC 960-28 52800 BPH THIS MACHINE WAS INSTALLED IN 2005 AND IT IS STILL RUNNING AND AVAILABLE IN SEPTEMBER 2016. TOTAL RUNNING HOURS TODAY BEING AROUND 40 000. THE LABELER IS CURRENTLY WORKING WITH 0.5, 0.6 AND 1.5 LITER PET BOTTLES WITH PRE-CUT WRAP-AROUND POLYPROPYLENE LABELS. LABEL MATERIAL IS POLYPROPYLENE WHICH WAS ATTACHED WITH TWO STRIPES OF HOT GLUE ON BOTH END OF THE LABEL. LABELER HAS ONE PRECUT LABEL FEEDING STATION AND TWO HOT GLUE STATIONS AND 28 CONTAINER STATIONS. CONTAINER ROTATING IS MADE WITH TEETHED PLASTIC BELT. TECHNICAL DATA MACHINE MANUFACTURER: KRONES AG MANUFACTURER'S TYPE: CANMATIC 960 - 28 YEAR OF MANUFACTURING: 2005 OPERATING HOURS APPROX 40 000 LABEL TYPE POLYPROPYLENE, WRAP-AROUND CONTAINER TABLE PITCH 960 MM NUMBER OF CONTAINER TABLES 28 GLUE HOT GLUE, LEADING AND TRAILING EDGE GLUING RATED OUTPUT: 52800 BPH ALIGNMENT: PARALLEL ARRANGEMENT ELECTRIC POWER 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make unknown, manufacturer plate is missing, floorspace 0,8x0,7 m, total height 0,5 m, weight 250 kg, rotary valve (1x), house material stainless steel , rotor material stainless steel , rotor diameter 200mm, rotor width 170mm, lock depth 10mm, inlet dia. 165mm, inlet flange sizes dia. 285mm, outlet 200x100mm, daylight 490mm, with motor 0,55 kw, 230/400 volt, extra specifications - housing jacketed (working pressure unknown)rotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, MANUFACTURER PLATE IS MISSING, FLOORSPACE 0,8X0,7 M, TOTAL HEIGHT 0,5 M, WEIGHT 250 KG, ROTARY VALVE (1X), HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 200MM, ROTOR WIDTH 170MM, LOCK DEPTH 10MM, INLET DIA. 165MM, INLET FLANGE SIZES DIA. 285MM, OUTLET 200X100MM, DAYLIGHT 490MM, WITH MOTOR 0,55 KW, 230/400 VOLT, EXTRA SPECIFICATIONS - HOUSING JACKETED (WORKING PRESSURE UNKNOWN)ROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-wartsila 52 mw chp power plant with 6 x 20v34sg gas generators - 2005

complete running power plant with 6 units of wartsila 20v34sg spark ignited natural gas engine driven generators. plant has the heat recovery boilers which can produce 6 x 4.5 t/h low pressure steam. the main equipment was delivered and commissioned by wartsila in year 2006 and 2008 and today the units have approx 40 000 - 50 000 operating hours depending on unit. the equipment is in good operational condition but the engines need a 46 000 hour overhaul.

generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.

the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power

main technical data at full load and current site conditions:
installed power 52 300 kw at 31.5 kv, 50 hz
plant steam output 6 x 5 tons/h at 14 bar
fuel: natural gas
engines: 6 x w20v34sg, running at 750 rpm
alternators: 6 x abb 12 162 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2005
operating hours: approx 50000 /unit
original heat rate (at alt.) 8188 kj/kwhe (44.0 %)
plant own consumption: 1200 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: in good operational   WARTSILA 52 MW CHP POWER PLANT WITH 6 X 20V34SG GAS GENERATORS - 2005 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 20V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. PLANT HAS THE HEAT RECOVERY BOILERS WHICH CAN PRODUCE 6 X 4.5 T/H LOW PRESSURE STEAM. THE MAIN EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2006 AND 2008 AND TODAY THE UNITS HAVE APPROX 40 000 - 50 000 OPERATING HOURS DEPENDING ON UNIT. THE EQUIPMENT IS IN GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 46 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER 52 300 KW AT 31.5 KV, 50 HZ PLANT STEAM OUTPUT 6 X 5 TONS/H AT 14 BAR FUEL: NATURAL GAS ENGINES: 6 X W20V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X ABB 12 162 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2005 OPERATING HOURS: APPROX 50000 /UNIT ORIGINAL HEAT RATE (AT ALT.) 8188 KJ/KWHE (44.0 %) PLANT OWN CONSUMPTION: 1200 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: IN GOOD OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make unknown, floorspace 0,7x0,6 m, total height 0,5 m, weight 150 kg, rotary valve (1x), house material stainless steel , rotor material stainless steel , rotor diameter 200mm, rotor width 200mm, lock sizes 230x110x95mm, inlet 200x200mm, inlet flange sizes 265x265mm, daylight ± 450mm, with motor ± 0,25 kwrotating valvesrotary valves > rotating valves what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE UNKNOWN, FLOORSPACE 0,7X0,6 M, TOTAL HEIGHT 0,5 M, WEIGHT 150 KG, ROTARY VALVE (1X), HOUSE MATERIAL STAINLESS STEEL , ROTOR MATERIAL STAINLESS STEEL , ROTOR DIAMETER 200MM, ROTOR WIDTH 200MM, LOCK SIZES 230X110X95MM, INLET 200X200MM, INLET FLANGE SIZES 265X265MM, DAYLIGHT ± 450MM, WITH MOTOR ± 0,25 KWROTATING VALVESROTARY VALVES > ROTATING VALVES WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-wartsila 41 mw single cycle power plant with 6 x 16v34sg gas generators - 2008
 
complete running power plant with 6 units of wartsila 16v34sg spark ignited natural gas engine driven generators. the equipment was delivered and commissioned by wartsila in year 2008 and today the units have approx 25 000 operating hours. the equipment is in very good operational condition but the engines need a 24 000 hour overhaul.
 
generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.
 
the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power
 
main technical data at full load and current site conditions:
 
installed power: 41 820 kw at 31.5 kv, 50 hz
fuel: natural gas
engines: 6 x w16v34sg, running at 750 rpm
alternators: 6 x akv 8712 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2008
operating hours: approx 25000 /unit
original heat rate (at alt. term) 8140 kj/kwhe (44.2 %)
plant own consumption: 836 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: very good, operational   WARTSILA 41 MW SINGLE CYCLE POWER PLANT WITH 6 X 16V34SG GAS GENERATORS - 2008 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 16V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. THE EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2008 AND TODAY THE UNITS HAVE APPROX 25 000 OPERATING HOURS. THE EQUIPMENT IS IN VERY GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 24 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER: 41 820 KW AT 31.5 KV, 50 HZ FUEL: NATURAL GAS ENGINES: 6 X W16V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X AKV 8712 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2008 OPERATING HOURS: APPROX 25000 /UNIT ORIGINAL HEAT RATE (AT ALT. TERM) 8140 KJ/KWHE (44.2 %) PLANT OWN CONSUMPTION: 836 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: VERY GOOD, OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 25.300 €
Ubicación: Land-: 2.000 mm<br/>: 40 to<br/>: 100 mm<br/>: 310 mm<br/>: 6 kw<br/>: 38 l<br/>: 1.750 mm<br/>: 950 mm<br/>: 1.900 mm<br/>: 1.640 kg<br/>motorized back gauge with push button and mechanical counter<br/>bending depth adjustment by push buttons, with digital read out<br/>intermediate pieces for the upper beam clamping<br/>upper tool 1010/75/r0,8/105  1x835 mm + 1x835 mm sectioned<br/>die 2009/85° (v16/22/35/50 mm) 1x835 mm + 1x835 mm sectioned<br/>2 sheet support arms<br/>oilfilling<br/>foot pedal<br/>according to ce rules<br/>users manual in german<br/><br/>(photo shows model hol-40e 1250)<br/><br/>bending length: 2.000 mm<br/>bending force: 40 to <br/>upper tool: ja <br/>lower tool: ja<br/>back gauge: 5 - 420 mm<br/>stroke: 100 mm<br/>daylight opening: 310 mm<br/>motor: 6 kw<br/>oilank: 38 l<br/>speed: 10 mm/s<br/>retraction speed: 12 mm/s<br/>back gauge speed: 40 mm/s<br/>accuracy jacking beam: +/- 0,02 mm<br/>accuracy back gauge: +/- 0,05 mm<br/>length: 1.750 mm <br/>width: 950 mm <br/>heigth: 1.900 mm<br/>weight: 1.640 kg<br/><br/><br/><br/> : 2.000 MM
: 40 TO
: 100 MM
: 310 MM
: 6 KW
: 38 L
: 1.750 MM
: 950 MM
: 1.900 MM
: 1.640 KG
MOTORIZED BACK GAUGE WITH PUSH BUTTON AND MECHANICAL COUNTER
BENDING DEPTH ADJUSTMENT BY PUSH BUTTONS, WITH DIGITAL READ OUT
INTERMEDIATE PIECES FOR THE UPPER BEAM CLAMPING
UPPER TOOL 1010/75/R0,8/105  1X835 MM + 1X835 MM SECTIONED
DIE 2009/85° (V16/22/35/50 MM) 1X835 MM + 1X835 MM SECTIONED
2 SHEET SUPPORT ARMS
OILFILLING
FOOT PEDAL
ACCORDING TO CE RULES
USERS MANUAL IN GERMAN

(PHOTO SHOWS MODEL HOL-40E 1250)

BENDING LENGTH: 2.000 MM
BENDING FORCE: 40 TO
UPPER TOOL: JA
LOWER TOOL: JA
BACK GAUGE: 5 - 420 MM
STROKE: 100 MM
DAYLIGHT OPENING: 310 MM
MOTOR: 6 KW
OILANK: 38 L
SPEED: 10 MM/S
RETRACTION SPEED: 12 MM/S
BACK GAUGE SPEED: 40 MM/S
ACCURACY JACKING BEAM: +/- 0,02 MM
ACCURACY BACK GAUGE: +/- 0,05 MM
LENGTH: 1.750 MM
WIDTH: 950 MM
HEIGTH: 1.900 MM
WEIGHT: 1.640 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
many lots will be on sale, of which a complete catalogue is published on our website or you can contact us at 030 7751645 during office hours 9-13, 14
 MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. MANY LOTS WILL BE ON SALE, OF WHICH A COMPLETE CATALOGUE IS PUBLISHED ON OUR WEBSITE OR YOU CAN CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: 20.100 €
Ubicación: Land-: 800 mm<br/>: 40 to<br/>: 100 mm<br/>: 310 mm<br/>: 6 kw<br/>: 38 l<br/>: 1.750 mm<br/>: 950 mm<br/>: 1.900 mm<br/>: 1.640 kg<br/>motorized back gauge with push button and mechanical counter<br/>bending depth adjustment by push buttons, with digital read out<br/>intermediate pieces for the upper beam clamping<br/>upper tool 1010/75/r0,8/105  1x835 mm + 1x835 mm sectioned<br/>die 2009/85° (v16/22/35/50 mm) 1x835 mm + 1x835 mm sectioned<br/>2 sheet support arms<br/>oilfilling<br/>foot pedal<br/>according to ce rules<br/>users manual in german<br/><br/>(photo shows model hol-40e 1250)<br/><br/>bending length: 1.250 mm<br/>bending force: 40 to <br/>upper tool: ja <br/>lower tool: ja<br/>back gauge: 5 - 420 mm<br/>stroke: 100 mm<br/>daylight opening: 310 mm<br/>motor: 6 kw<br/>oilank: 38 l<br/>speed: 10 mm/s<br/>retraction speed: 12 mm/s<br/>back gauge speed: 40 mm/s<br/>accuracy jacking beam: +/- 0,02 mm<br/>accuracy back gauge: +/- 0,05 mm<br/>length: 1.750 mm <br/>width: 950 mm <br/>heigth: 1.900 mm<br/>weight: 1.640 kg<br/><br/><br/><br/> : 800 MM
: 40 TO
: 100 MM
: 310 MM
: 6 KW
: 38 L
: 1.750 MM
: 950 MM
: 1.900 MM
: 1.640 KG
MOTORIZED BACK GAUGE WITH PUSH BUTTON AND MECHANICAL COUNTER
BENDING DEPTH ADJUSTMENT BY PUSH BUTTONS, WITH DIGITAL READ OUT
INTERMEDIATE PIECES FOR THE UPPER BEAM CLAMPING
UPPER TOOL 1010/75/R0,8/105  1X835 MM + 1X835 MM SECTIONED
DIE 2009/85° (V16/22/35/50 MM) 1X835 MM + 1X835 MM SECTIONED
2 SHEET SUPPORT ARMS
OILFILLING
FOOT PEDAL
ACCORDING TO CE RULES
USERS MANUAL IN GERMAN

(PHOTO SHOWS MODEL HOL-40E 1250)

BENDING LENGTH: 1.250 MM
BENDING FORCE: 40 TO
UPPER TOOL: JA
LOWER TOOL: JA
BACK GAUGE: 5 - 420 MM
STROKE: 100 MM
DAYLIGHT OPENING: 310 MM
MOTOR: 6 KW
OILANK: 38 L
SPEED: 10 MM/S
RETRACTION SPEED: 12 MM/S
BACK GAUGE SPEED: 40 MM/S
ACCURACY JACKING BEAM: +/- 0,02 MM
ACCURACY BACK GAUGE: +/- 0,05 MM
LENGTH: 1.750 MM
WIDTH: 950 MM
HEIGTH: 1.900 MM
WEIGHT: 1.640 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-this inline heuft ebi was made in year 2007 and relocated in 2011. today it is still installed but not in use nor connected to the power. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. the capacity of this inline ebi is min 50 000 bph and equipment is in very good condition.

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on aglass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft inline ebi with reflexx image processing
capacity: up to 70 000 bph
reliability: 99.9 % detection   THIS INLINE HEUFT EBI WAS MADE IN YEAR 2007 AND RELOCATED IN 2011. TODAY IT IS STILL INSTALLED BUT NOT IN USE NOR CONNECTED TO THE POWER. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. THE CAPACITY OF THIS INLINE EBI IS MIN 50 000 BPH AND EQUIPMENT IS IN VERY GOOD CONDITION. THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON AGLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING CAPACITY: UP TO 70 000 BPH RELIABILITY: 99.9 % DETECTION
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 21.700 €
Ubicación: Land-: 1.250 mm<br/>: 40 to<br/>: 100 mm<br/>: 310 mm<br/>: 6 kw<br/>: 38 l<br/>: 1.750 mm<br/>: 950 mm<br/>: 1.900 mm<br/>: 1.640 kg<br/>motorized back gauge with push button and mechanical counter<br/>bending depth adjustment by push buttons, with digital read out<br/>intermediate pieces for the upper beam clamping<br/>upper tool 1010/75/r0,8/105  1x835 mm + 1x835 mm sectioned<br/>die 2009/85° (v16/22/35/50 mm) 1x835 mm + 1x835 mm sectioned<br/>2 sheet support arms<br/>oilfilling<br/>foot pedal<br/>according to ce rules<br/>users manual in german<br/> <br/><br/>bending length: 1.250 mm<br/>bending force: 40 to <br/>upper tool: ja <br/>lower tool: ja<br/>back gauge: 5 - 420 mm<br/>stroke: 100 mm<br/>daylight opening: 310 mm<br/>motor: 6 kw<br/>oilank: 38 l<br/>speed: 10 mm/s<br/>retraction speed: 12 mm/s<br/>back gauge speed: 40 mm/s<br/>accuracy jacking beam: +/- 0,02 mm<br/>accuracy back gauge: +/- 0,05 mm<br/>length: 1.750 mm <br/>width: 950 mm <br/>heigth: 1.900 mm<br/>weight: 1.640 kg<br/><br/><br/><br/> : 1.250 MM
: 40 TO
: 100 MM
: 310 MM
: 6 KW
: 38 L
: 1.750 MM
: 950 MM
: 1.900 MM
: 1.640 KG
MOTORIZED BACK GAUGE WITH PUSH BUTTON AND MECHANICAL COUNTER
BENDING DEPTH ADJUSTMENT BY PUSH BUTTONS, WITH DIGITAL READ OUT
INTERMEDIATE PIECES FOR THE UPPER BEAM CLAMPING
UPPER TOOL 1010/75/R0,8/105  1X835 MM + 1X835 MM SECTIONED
DIE 2009/85° (V16/22/35/50 MM) 1X835 MM + 1X835 MM SECTIONED
2 SHEET SUPPORT ARMS
OILFILLING
FOOT PEDAL
ACCORDING TO CE RULES
USERS MANUAL IN GERMAN


BENDING LENGTH: 1.250 MM
BENDING FORCE: 40 TO
UPPER TOOL: JA
LOWER TOOL: JA
BACK GAUGE: 5 - 420 MM
STROKE: 100 MM
DAYLIGHT OPENING: 310 MM
MOTOR: 6 KW
OILANK: 38 L
SPEED: 10 MM/S
RETRACTION SPEED: 12 MM/S
BACK GAUGE SPEED: 40 MM/S
ACCURACY JACKING BEAM: +/- 0,02 MM
ACCURACY BACK GAUGE: +/- 0,05 MM
LENGTH: 1.750 MM
WIDTH: 950 MM
HEIGTH: 1.900 MM
WEIGHT: 1.640 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-brewhouse huppmann 410 hl / brew - approx 1 m hl / year

brewhouse made by huppmann in year 2000, 410 hl/brew, with a mash filter, made by nordon in year 1997. it is complete line, in good condition, not dismantled, it is possible to test the equipment. the brewhouse is controlled by pc.

installed mash filter nordon improves the performance of brewing process (compare to filer tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change.

capacity: mash tank - 410 hl/brew, malt 9 tn. per brew, 12 brews per day
bottle neck is mash tank. brewhouse capacity can be doubled by installation of second mash tank.

list of equipment:
- mash tank huppmann, 410 hl, 4200 mm diameter, malt 9 tons per brew, capacity 12 brews per day, year 2002
- mash tank heat exchanger, api schmidt-bretten type: si 108 sbl, year 2000
- ferments dosing system by prominent with 3 x 500 liter pvc tanks
- mash filter nordon, 53 plates, 1997
- wort collecting tank, horizontal, 410 hl
- wort kettle huppmann, 930 hl, 5200 mm diameter, the heating boiler surface - 55 m2, 2002. boiling of the wort runs at high pressure that allows to reach temperature of 104 - 106 c,
- hop dosing tanks, huppmann 3 x 235 liters, year 1998
- heat exchanger of wort kettle, apv type k55,year 1998
- whirlpool huppmann, 650 hl, diameter 5800 mm, year 2002
- press-filter buffer tanks, huppmann, 1999
- tank for collecting protein
- piping, pumps, valves, etc.
- computer control system of brewhouse based on the pc.   BREWHOUSE HUPPMANN 410 HL / BREW - APPROX 1 M HL / YEAR BREWHOUSE MADE BY HUPPMANN IN YEAR 2000, 410 HL/BREW, WITH A MASH FILTER, MADE BY NORDON IN YEAR 1997. IT IS COMPLETE LINE, IN GOOD CONDITION, NOT DISMANTLED, IT IS POSSIBLE TO TEST THE EQUIPMENT. THE BREWHOUSE IS CONTROLLED BY PC. INSTALLED MASH FILTER NORDON IMPROVES THE PERFORMANCE OF BREWING PROCESS (COMPARE TO FILER TANK) AND ALLOWS THE USE IN THE PRODUCTION LOW QUALITY (DUSTY) MALT AND THE FILTRATION SPEED AND QUALITY DO NOT CHANGE. CAPACITY: MASH TANK - 410 HL/BREW, MALT 9 TN. PER BREW, 12 BREWS PER DAY BOTTLE NECK IS MASH TANK. BREWHOUSE CAPACITY CAN BE DOUBLED BY INSTALLATION OF SECOND MASH TANK. LIST OF EQUIPMENT: - MASH TANK HUPPMANN, 410 HL, 4200 MM DIAMETER, MALT 9 TONS PER BREW, CAPACITY 12 BREWS PER DAY, YEAR 2002 - MASH TANK HEAT EXCHANGER, API SCHMIDT-BRETTEN TYPE: SI 108 SBL, YEAR 2000 - FERMENTS DOSING SYSTEM BY PROMINENT WITH 3 X 500 LITER PVC TANKS - MASH FILTER NORDON, 53 PLATES, 1997 - WORT COLLECTING TANK, HORIZONTAL, 410 HL - WORT KETTLE HUPPMANN, 930 HL, 5200 MM DIAMETER, THE HEATING BOILER SURFACE - 55 M2, 2002. BOILING OF THE WORT RUNS AT HIGH PRESSURE THAT ALLOWS TO REACH TEMPERATURE OF 104 - 106 C, - HOP DOSING TANKS, HUPPMANN 3 X 235 LITERS, YEAR 1998 - HEAT EXCHANGER OF WORT KETTLE, APV TYPE K55,YEAR 1998 - WHIRLPOOL HUPPMANN, 650 HL, DIAMETER 5800 MM, YEAR 2002 - PRESS-FILTER BUFFER TANKS, HUPPMANN, 1999 - TANK FOR COLLECTING PROTEIN - PIPING, PUMPS, VALVES, ETC. - COMPUTER CONTROL SYSTEM OF BREWHOUSE BASED ON THE PC.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 23.300 €
Ubicación: Land-: 1.500 mm<br/>: 40 to<br/>: 100 mm<br/>: 310 mm<br/>: 6 kw<br/>: 38 l<br/>: 1.750 mm<br/>: 950 mm<br/>: 1.900 mm<br/>: 1.640 kg<br/>motorized back gauge with push button and mechanical counter<br/>bending depth adjustment by push buttons, with digital read out<br/>intermediate pieces for the upper beam clamping<br/>upper tool 1010/75/r0,8/105  1x835 mm + 1x835 mm sectioned<br/>die 2009/85° (v16/22/35/50 mm) 1x835 mm + 1x835 mm sectioned<br/>2 sheet support arms<br/>oilfilling<br/>foot pedal<br/>according to ce rules<br/>users manual in german<br/><br/>(photo shows model hol-40e 1250)<br/><br/>bending length: 1.500 mm<br/>bending force: 40 to <br/>upper tool: ja <br/>lower tool: ja<br/>back gauge: 5 - 420 mm<br/>stroke: 100 mm<br/>daylight opening: 310 mm<br/>motor: 6 kw<br/>oilank: 38 l<br/>speed: 10 mm/s<br/>retraction speed: 12 mm/s<br/>back gauge speed: 40 mm/s<br/>accuracy jacking beam: +/- 0,02 mm<br/>accuracy back gauge: +/- 0,05 mm<br/>length: 1.750 mm <br/>width: 950 mm <br/>heigth: 1.900 mm<br/>weight: 1.640 kg<br/><br/><br/><br/> : 1.500 MM
: 40 TO
: 100 MM
: 310 MM
: 6 KW
: 38 L
: 1.750 MM
: 950 MM
: 1.900 MM
: 1.640 KG
MOTORIZED BACK GAUGE WITH PUSH BUTTON AND MECHANICAL COUNTER
BENDING DEPTH ADJUSTMENT BY PUSH BUTTONS, WITH DIGITAL READ OUT
INTERMEDIATE PIECES FOR THE UPPER BEAM CLAMPING
UPPER TOOL 1010/75/R0,8/105  1X835 MM + 1X835 MM SECTIONED
DIE 2009/85° (V16/22/35/50 MM) 1X835 MM + 1X835 MM SECTIONED
2 SHEET SUPPORT ARMS
OILFILLING
FOOT PEDAL
ACCORDING TO CE RULES
USERS MANUAL IN GERMAN

(PHOTO SHOWS MODEL HOL-40E 1250)

BENDING LENGTH: 1.500 MM
BENDING FORCE: 40 TO
UPPER TOOL: JA
LOWER TOOL: JA
BACK GAUGE: 5 - 420 MM
STROKE: 100 MM
DAYLIGHT OPENING: 310 MM
MOTOR: 6 KW
OILANK: 38 L
SPEED: 10 MM/S
RETRACTION SPEED: 12 MM/S
BACK GAUGE SPEED: 40 MM/S
ACCURACY JACKING BEAM: +/- 0,02 MM
ACCURACY BACK GAUGE: +/- 0,05 MM
LENGTH: 1.750 MM
WIDTH: 950 MM
HEIGTH: 1.900 MM
WEIGHT: 1.640 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-beer mash filter press nortek hd 800 hl /h
 
this mash filter was manufactured by belgium nordon in year 1998 and it is still installed in st.petersburg, russia. it was filtrating mash from two mash kettles, each 410 hl/brew, 12 brews per day. the equipment is in good condition.
 
capacity: 9 ton malt in one brew, 12 brews per day, one brew 410 hl > 4920 hl/day
manufacturer: nordon, france
manufacturing year: 1998
filter plates: 53 plates, plate size 2 x 2 m
 
the scope of suply:
- automatic norden mash filter
- set of automatic valves &equipments
- set of instrumentation
- air thrust system
- control valves for sparge water
- spend grains screw & expeller
- additional abv & instrumentation
- mash pump
- control & power cabinet
- wort buffer tank

total net weight: 32 020 kg.
total gross weight: 37 660 kg.   BEER MASH FILTER PRESS NORTEK HD 800 HL /H THIS MASH FILTER WAS MANUFACTURED BY BELGIUM NORDON IN YEAR 1998 AND IT IS STILL INSTALLED IN ST.PETERSBURG, RUSSIA. IT WAS FILTRATING MASH FROM TWO MASH KETTLES, EACH 410 HL/BREW, 12 BREWS PER DAY. THE EQUIPMENT IS IN GOOD CONDITION. CAPACITY: 9 TON MALT IN ONE BREW, 12 BREWS PER DAY, ONE BREW 410 HL > 4920 HL/DAY MANUFACTURER: NORDON, FRANCE MANUFACTURING YEAR: 1998 FILTER PLATES: 53 PLATES, PLATE SIZE 2 X 2 M THE SCOPE OF SUPLY: - AUTOMATIC NORDEN MASH FILTER - SET OF AUTOMATIC VALVES &EQUIPMENTS - SET OF INSTRUMENTATION - AIR THRUST SYSTEM - CONTROL VALVES FOR SPARGE WATER - SPEND GRAINS SCREW & EXPELLER - ADDITIONAL ABV & INSTRUMENTATION - MASH PUMP - CONTROL & POWER CABINET - WORT BUFFER TANK TOTAL NET WEIGHT: 32 020 KG. TOTAL GROSS WEIGHT: 37 660 KG.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-x-travel:3000 mm<br/>y-travel:1000 mm<br/>z-travel:1500 mm<br/>t-slot (width-distance-quantity):22h8x7 stk. mm<br/>table area:3100x1050 mm<br/>max. table load:8000 kg<br/>spindle taper:50 sk<br/>spindle speeds:3500 1/min.<br/>spindle motor:15/18,5 kw<br/>feed:1~8000 mm/min<br/>rapid speed:10 m/min<br/>positioning accuracy:jis 6338;±0,005mm / 300mm vdi 3441:p0,014mm <br/>repeating accuracy:jis 6338:±0,003mm  vdi3441:ps0,01 mm <br/>total power requirement:35 kva<br/>weight of the machine ca.:13,5 t<br/>dimensions of the machine ca.:7670x4325 (lxt) mm<br/>universal milling head:2,5° auto <br/>linear scales in x-y-z axes:von heidenhain; mit ausblasvorrichtung <br/>chip conveyor:schneckenausführung vorne/hinten <br/>ce-design: <br/>cnc control:heidenhain 640 <br/>rs232 terminal interface port: <br/>tools: <br/>levellig elements: <br/>halogen lamp: <br/>alarming lamp: <br/>technical documentation: <br/>ce-certificate: <br/>3 chip conveyor: <br/><br/>trade term : f.o.b. taiwan port  shipment : within 14 days after receipt of your down payment payment : 30% down payment by swift transfer, 70% by irrevocable & sight l/c in our favor packing : by seaworthy package warranty:  12 months validity : 60 days X-TRAVEL:3000 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:1500 MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8X7 STK. MM
TABLE AREA:3100X1050 MM
MAX. TABLE LOAD:8000 KG
SPINDLE TAPER:50 SK
SPINDLE SPEEDS:3500 1/MIN.
SPINDLE MOTOR:15/18,5 KW
FEED:1~8000 MM/MIN
RAPID SPEED:10 M/MIN
POSITIONING ACCURACY:JIS 6338;±0,005MM / 300MM VDI 3441:P0,014MM
REPEATING ACCURACY:JIS 6338:±0,003MM VDI3441:PS0,01 MM
TOTAL POWER REQUIREMENT:35 KVA
WEIGHT OF THE MACHINE CA.:13,5 T
DIMENSIONS OF THE MACHINE CA.:7670X4325 (LXT) MM
UNIVERSAL MILLING HEAD:2,5° AUTO
LINEAR SCALES IN X-Y-Z AXES:VON HEIDENHAIN; MIT AUSBLASVORRICHTUNG
CHIP CONVEYOR:SCHNECKENAUSFüHRUNG VORNE/HINTEN
CE-DESIGN:
CNC CONTROL:HEIDENHAIN 640
RS232 TERMINAL INTERFACE PORT:
TOOLS:
LEVELLIG ELEMENTS:
HALOGEN LAMP:
ALARMING LAMP:
TECHNICAL DOCUMENTATION:
CE-CERTIFICATE:
3 CHIP CONVEYOR:

TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY SEAWORTHY PACKAGE WARRANTY: 12 MONTHS VALIDITY : 60 DAYS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-trane cooling compressor 964 kw
 
compressors are made by trane in year 2006 and they are semi hermetic, helical rotary liquid compressors with capacity of 964 kw capacity at 5c cooling media (water-glycol solution) outlet. compressor is controlled with modern micro processor controlled adaptive control system type ch. 530 equipment are dismantled in the beginning of 2013, excellent condition and are today ready for immediate delivery.
 
our technical specifications:
•made by trane france in year 2006
•operating hours approx 15000
•1 helical rotary liquid compressors, type trane rthd e3, with evaporator type g3 and condensate type g3
•drive with direct motors 4 x 288 kw/380 v / 50 hz
•cooling capacity 964 kw at 5 degree of celsius or 450 rt
•refrigerant freon 12 (r132 a) filling capacity 318 kg/unit   TRANE COOLING COMPRESSOR 964 KW COMPRESSORS ARE MADE BY TRANE IN YEAR 2006 AND THEY ARE SEMI HERMETIC, HELICAL ROTARY LIQUID COMPRESSORS WITH CAPACITY OF 964 KW CAPACITY AT 5C COOLING MEDIA (WATER-GLYCOL SOLUTION) OUTLET. COMPRESSOR IS CONTROLLED WITH MODERN MICRO PROCESSOR CONTROLLED ADAPTIVE CONTROL SYSTEM TYPE CH. 530 EQUIPMENT ARE DISMANTLED IN THE BEGINNING OF 2013, EXCELLENT CONDITION AND ARE TODAY READY FOR IMMEDIATE DELIVERY. OUR TECHNICAL SPECIFICATIONS: •MADE BY TRANE FRANCE IN YEAR 2006 •OPERATING HOURS APPROX 15000 •1 HELICAL ROTARY LIQUID COMPRESSORS, TYPE TRANE RTHD E3, WITH EVAPORATOR TYPE G3 AND CONDENSATE TYPE G3 •DRIVE WITH DIRECT MOTORS 4 X 288 KW/380 V / 50 HZ •COOLING CAPACITY 964 KW AT 5 DEGREE OF CELSIUS OR 450 RT •REFRIGERANT FREON 12 (R132 A) FILLING CAPACITY 318 KG/UNIT
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-x-travel:4000 mm<br/>y-travel:1000 mm<br/>z-travel:950 (opt.1500) mm<br/>t-slot (width-distance-quantity):22h8x7 stk. mm<br/>table area:3600x1000 mm<br/>max. table load:9000 kg<br/>spindle taper:50 sk<br/>spindle speeds:3500 (5000 opt.) 1/min.<br/>spindle motor:15/18,5 (22/26 opt) kw<br/>feed:1~8000 mm/min<br/>rapid speed:10 m/min<br/>positioning accuracy:jis 6338;±0,005mm / 300mm vdi 3441:p0,014mm <br/>repeating accuracy:jis 6338:±0,003mm  vdi3441:ps0,01 mm <br/>total power requirement:40 kva<br/>weight of the machine ca.:23,6 t<br/>dimensions of the machine ca.: m<br/>universal milling head:manuell <br/>linear scales in x-y-z axes:von heidenhain; mit ausblasvorrichtung von  <br/>chip conveyor:schneckenausführung vorne/hinten <br/>ce-design: <br/>cnc control:siemens/fanuc/heidenhain <br/>rs232 terminal interface port: <br/>tools: <br/>levellig elements: <br/>halogen lamp: <br/>alarming lamp: <br/>technical documentation: <br/>ce-certificate: <br/><br/>trade term : f.o.b. taiwan port  shipment : within 14 days after receipt of your down payment payment : 30% down payment by swift transfer, 70% by irrevocable & sight l/c in our favor packing : by seaworthy package warranty:  12 months validity : 60 days X-TRAVEL:4000 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:950 (OPT.1500) MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8X7 STK. MM
TABLE AREA:3600X1000 MM
MAX. TABLE LOAD:9000 KG
SPINDLE TAPER:50 SK
SPINDLE SPEEDS:3500 (5000 OPT.) 1/MIN.
SPINDLE MOTOR:15/18,5 (22/26 OPT) KW
FEED:1~8000 MM/MIN
RAPID SPEED:10 M/MIN
POSITIONING ACCURACY:JIS 6338;±0,005MM / 300MM VDI 3441:P0,014MM
REPEATING ACCURACY:JIS 6338:±0,003MM VDI3441:PS0,01 MM
TOTAL POWER REQUIREMENT:40 KVA
WEIGHT OF THE MACHINE CA.:23,6 T
DIMENSIONS OF THE MACHINE CA.: M
UNIVERSAL MILLING HEAD:MANUELL
LINEAR SCALES IN X-Y-Z AXES:VON HEIDENHAIN; MIT AUSBLASVORRICHTUNG VON
CHIP CONVEYOR:SCHNECKENAUSFüHRUNG VORNE/HINTEN
CE-DESIGN:
CNC CONTROL:SIEMENS/FANUC/HEIDENHAIN
RS232 TERMINAL INTERFACE PORT:
TOOLS:
LEVELLIG ELEMENTS:
HALOGEN LAMP:
ALARMING LAMP:
TECHNICAL DOCUMENTATION:
CE-CERTIFICATE:

TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENT PAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER, 70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVOR PACKING : BY SEAWORTHY PACKAGE WARRANTY: 12 MONTHS VALIDITY : 60 DAYS
Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)