18 ofertas

Año de construcción: usado
Ubicación: Land-capacity:
max grinding length: 609 mm
max grinding width: 203 mm
distance between table and grinding wheel: 357mm
(max. with new wheel)
maximum wheel size: 250 x 25 x 76 mm
grinding wheel speed: 1000-3200u/min
bdpdtlrbnz
table feed x axis: hydraulic drive speed: 1-25 m / min process speed overdrive: 100-75% table typing speed: 1-6 m / min from radio passes (max.): 99 wheel delivery y-axis / cross feed z-axis: 
gleichstromservomotor with linear feedback programmable increment (min): 0.001 mm speed: 0,06-3000 mm / min from radio passages, lower carriage (max.): 99 electronic handwheel, switchable: 0.001 mm; 0.01 mm or 0.1 mm steps control system : osai-from 8600 nc number controlled axis: 2 data entry manual, or remote input electrical data: three-phase mains voltage: 380/440 v, 50 hz, 16 a control voltage: 110 v grinding spindle stock motor: 2.2 (2.9 kw) including: 1pc sav electric permanent magnet abm serves: 600 x 200 mm type: 243.70.-600 x 200 s-no.: 50298 built: 2007 voltage: 360 v 3 piece already installed 1 piece dresser already grinding wheel incl. 1 grinding wheel flange mounted grinding wheel dimensions: 230 x 25 x 76 mm 1 pcs band filter system with coolant system and 1 piece filter paper roll broken on 1 piece installation, operating, maintenance and programming instructions CAPACITY: MAX GRINDING LENGTH: 609 MM MAX GRINDING WIDTH: 203 MM DISTANCE BETWEEN TABLE AND GRINDING WHEEL: 357MM (MAX. WITH NEW WHEEL) MAXIMUM WHEEL SIZE: 250 X 25 X 76 MM GRINDING WHEEL SPEED: 1000-3200U/MIN BDPDTLRBNZ TABLE FEED X AXIS: HYDRAULIC DRIVE SPEED: 1-25 M / MIN PROCESS SPEED OVERDRIVE: 100-75% TABLE TYPING SPEED: 1-6 M / MIN FROM RADIO PASSES (MAX.): 99 WHEEL DELIVERY Y-AXIS / CROSS FEED Z-AXIS: GLEICHSTROMSERVOMOTOR WITH LINEAR FEEDBACK PROGRAMMABLE INCREMENT (MIN): 0.001 MM SPEED: 0,06-3000 MM / MIN FROM RADIO PASSAGES, LOWER CARRIAGE (MAX.): 99 ELECTRONIC HANDWHEEL, SWITCHABLE: 0.001 MM; 0.01 MM OR 0.1 MM STEPS CONTROL SYSTEM : OSAI-FROM 8600 NC NUMBER CONTROLLED AXIS: 2 DATA ENTRY MANUAL, OR REMOTE INPUT ELECTRICAL DATA: THREE-PHASE MAINS VOLTAGE: 380/440 V, 50 HZ, 16 A CONTROL VOLTAGE: 110 V GRINDING SPINDLE STOCK MOTOR: 2.2 (2.9 KW) INCLUDING: 1PC SAV ELECTRIC PERMANENT MAGNET ABM SERVES: 600 X 200 MM TYPE: 243.70.-600 X 200 S-NO.: 50298 BUILT: 2007 VOLTAGE: 360 V 3 PIECE ALREADY INSTALLED 1 PIECE DRESSER ALREADY GRINDING WHEEL INCL. 1 GRINDING WHEEL FLANGE MOUNTED GRINDING WHEEL DIMENSIONS: 230 X 25 X 76 MM 1 PCS BAND FILTER SYSTEM WITH COOLANT SYSTEM AND 1 PIECE FILTER PAPER ROLL BROKEN ON 1 PIECE INSTALLATION, OPERATING, MAINTENANCE AND PROGRAMMING INSTRUCTIONS
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 21.000 €
Ubicación: Land-weight approx.: 2700 kg<br/>grinding length: 1000 mm<br/>grinding diameter: 254 mm<br/>dimensions (l x w x h) approx.: 3300 x 1800 x 1800 mm<br/>workpiece weight max.: 100 kg<br/>description: jones & shipman 1300 x /1000 cylindrical grinder<br> <br> headstock workpiece:<br> - speeds: 30/450 r/min<br> - centre height: 127 mm<br> - swing angle right/left: 15°/90°<br> <br> wheelhead (x-axis):<br> - infeed total: 245 mm<br> - max. programmable Ø-infeed rate: 100 mm/min<br> - max. traverse speed: 5000 - 10000 mm/min<br> - min. programmable increment (Ø): 0,001 mm<br> - swivel range right/left, 190°/45°<br> external wheels:<br> - size of grinding wheel left: 350 x 50 x 127 mm<br> - size of grinding wheel right: 300 x 25 x 127 mm<br> - spindle speeds: 1775, 2068, 2400 r/min<br> - motor power: 4 kw<br> internal wheel:<br> - size 19 x 38 mm<br> - spindle speeds: 10500, 16500, 24000 u/min<br> - motor power: 2,2 kw<br> <br> table (z-achse):<br> - max. grinding length between centers: 1000 mm<br> - max. travers speed: 5000 mm/min<br> - min. programmable increment: 0,001 mm<br> - table swiveling right a. left (internal angle): 10° u. 16°<br> WEIGHT APPROX.: 2700 KG
GRINDING LENGTH: 1000 MM
GRINDING DIAMETER: 254 MM
DIMENSIONS (L X W X H) APPROX.: 3300 X 1800 X 1800 MM
WORKPIECE WEIGHT MAX.: 100 KG
DESCRIPTION: JONES & SHIPMAN 1300 X /1000 CYLINDRICAL GRINDER

HEADSTOCK WORKPIECE:
- SPEEDS: 30/450 R/MIN
- CENTRE HEIGHT: 127 MM
- SWING ANGLE RIGHT/LEFT: 15°/90°

WHEELHEAD (X-AXIS):
- INFEED TOTAL: 245 MM
- MAX. PROGRAMMABLE Ø-INFEED RATE: 100 MM/MIN
- MAX. TRAVERSE SPEED: 5000 - 10000 MM/MIN
- MIN. PROGRAMMABLE INCREMENT (Ø): 0,001 MM
- SWIVEL RANGE RIGHT/LEFT, 190°/45°
EXTERNAL WHEELS:
- SIZE OF GRINDING WHEEL LEFT: 350 X 50 X 127 MM
- SIZE OF GRINDING WHEEL RIGHT: 300 X 25 X 127 MM
- SPINDLE SPEEDS: 1775, 2068, 2400 R/MIN
- MOTOR POWER: 4 KW
INTERNAL WHEEL:
- SIZE 19 X 38 MM
- SPINDLE SPEEDS: 10500, 16500, 24000 U/MIN
- MOTOR POWER: 2,2 KW

TABLE (Z-ACHSE):
- MAX. GRINDING LENGTH BETWEEN CENTERS: 1000 MM
- MAX. TRAVERS SPEED: 5000 MM/MIN
- MIN. PROGRAMMABLE INCREMENT: 0,001 MM
- TABLE SWIVELING RIGHT A. LEFT (INTERNAL ANGLE): 10° U. 16°
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-make: jones & shipman
model: 1600
condition: used
machine type: mill 
location of machine: united kingdom 
width: 470mm 
height: 1900mm 
service details: no history

machine details
jones & shipman 1600 cone centre lapping machine. with wheel dresser, tailstock and vee support. 

new dol and emergency stop.  new polycarbonate installed in front guard  MAKE: JONES & SHIPMAN MODEL: 1600 CONDITION: USED MACHINE TYPE: MILL LOCATION OF MACHINE: UNITED KINGDOM WIDTH: 470MM HEIGHT: 1900MM SERVICE DETAILS: NO HISTORY MACHINE DETAILS JONES & SHIPMAN 1600 CONE CENTRE LAPPING MACHINE. WITH WHEEL DRESSER, TAILSTOCK AND VEE SUPPORT. NEW DOL AND EMERGENCY STOP. NEW POLYCARBONATE INSTALLED IN FRONT GUARD
Vendedor: CNC Management Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 15.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 2300 x 2600 x 2500 mm<br/>description: jones & shipman tech master 634 grinding machine serial number z21009. magnetic chuck size 600x300 mm. yaskawa regulators. automatic diamond wheelfeed. vertical and trasversal capability WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 2600 X 2500 MM
DESCRIPTION: JONES & SHIPMAN TECH MASTER 634 GRINDING MACHINE SERIAL NUMBER Z21009. MAGNETIC CHUCK SIZE 600X300 MM. YASKAWA REGULATORS. AUTOMATIC DIAMOND WHEELFEED. VERTICAL AND TRASVERSAL CAPABILITY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-jones-shipman roll grinder
the model we can offer is 1053
working swing diameter: 10”
grinding length between centres 60”
5” work centre height JONES-SHIPMAN ROLL GRINDER THE MODEL WE CAN OFFER IS 1053 WORKING SWING DIAMETER: 10” GRINDING LENGTH BETWEEN CENTRES 60” 5” WORK CENTRE HEIGHT
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-grinding length:    400 mm<br/>grinding width:    163 mm<br/>workpiece height:        mm<br/>--------------------------------------------------:  <br/>working range surface grinding:  <br/>- grinding length:    400 mm<br/>- grinding width:    163 mm<br/>- vertical travel:    200 mm<br/>table (surface grinding):  <br/>- magnetic table: yes:        <br/>magnetic table:  <br/>- length:    350 mm<br/>- width:    150 mm<br/>- height:     50 mm<br/>spindlestock grinding spindle:  <br/>- x-axis travel:    483 mm<br/>- y-axis travel:    171 mm<br/>- z-axis travel:    179 mm<br/>- spindle revolutions (max):   2800 /min<br/>grinding tool:  <br/>- type of grinding tool: wheel:        <br/>- diameter (max):    178 mm<br/>- borehole: diameter:     32 mm<br/>- width:     13 mm<br/>electrical specifications:  <br/>- total power consumption:    1.5 kw<br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   1650 mm<br/>- space requirements -front/back-:    825 mm<br/>- total weight approx.:    800 kg<br/>machine can be inspected in operation<br/>https://youtu.be/eb1ymznaenw<br/><br/><br/><br/><br/> GRINDING LENGTH: 400 MM
GRINDING WIDTH: 163 MM
WORKPIECE HEIGHT: MM
--------------------------------------------------:
WORKING RANGE SURFACE GRINDING:
- GRINDING LENGTH: 400 MM
- GRINDING WIDTH: 163 MM
- VERTICAL TRAVEL: 200 MM
TABLE (SURFACE GRINDING):
- MAGNETIC TABLE: YES:
MAGNETIC TABLE:
- LENGTH: 350 MM
- WIDTH: 150 MM
- HEIGHT: 50 MM
SPINDLESTOCK GRINDING SPINDLE:
- X-AXIS TRAVEL: 483 MM
- Y-AXIS TRAVEL: 171 MM
- Z-AXIS TRAVEL: 179 MM
- SPINDLE REVOLUTIONS (MAX): 2800 /MIN
GRINDING TOOL:
- TYPE OF GRINDING TOOL: WHEEL:
- DIAMETER (MAX): 178 MM
- BOREHOLE: DIAMETER: 32 MM
- WIDTH: 13 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 1.5 KW
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 1650 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 825 MM
- TOTAL WEIGHT APPROX.: 800 KG
MACHINE CAN BE INSPECTED IN OPERATION
HTTPS://YOUTU.BE/EB1YMZNAENW




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-weight approx.: 945 kg<br/>dimensions (l x w x h) approx.: 1100 x 1300 x 1900 mm<br/>description: height 660.4 mm. stroke lenght 76.2 mm. distance between spindle/columns 241.3 mm. spindle speed 940 rpm. min diameter 6.35 mm. max diameter 25.4 mm. max depth 76.2 mm WEIGHT APPROX.: 945 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 1300 X 1900 MM
DESCRIPTION: HEIGHT 660.4 MM. STROKE LENGHT 76.2 MM. DISTANCE BETWEEN SPINDLE/COLUMNS 241.3 MM. SPINDLE SPEED 940 RPM. MIN DIAMETER 6.35 MM. MAX DIAMETER 25.4 MM. MAX DEPTH 76.2 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-centre distance: 650 mm<br/>centre height: 160 mm<br/>grinding diameter: 300 mm<br/>width of grinding wheel: 457 mm<br/>grinding wheel diameter: 50 mm<br/>stroke length max.: 750 mm<br/>traversing speed: 12 m/min<br/>table - swivable: 16 - 18 grad<br/>max. torque: 27 nm<br/>grinding wheel width x diameter: 457x50 mm<br/>grinding wheel hole diameter: 203,2 mm<br/>grinding wheel - swivable: 190 / 45 °<br/>grinding wheel adjustment: 260 mm<br/>grinding wheel speed: 6 m/min<br/>control: ge fanuc power mate<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 5 t<br/>dimensions of the machine ca.: 4,1x2,6x2,2 m<br/><br/><br/><br/><br/> CENTRE DISTANCE: 650 MM
CENTRE HEIGHT: 160 MM
GRINDING DIAMETER: 300 MM
WIDTH OF GRINDING WHEEL: 457 MM
GRINDING WHEEL DIAMETER: 50 MM
STROKE LENGTH MAX.: 750 MM
TRAVERSING SPEED: 12 M/MIN
TABLE - SWIVABLE: 16 - 18 GRAD
MAX. TORQUE: 27 NM
GRINDING WHEEL WIDTH X DIAMETER: 457X50 MM
GRINDING WHEEL HOLE DIAMETER: 203,2 MM
GRINDING WHEEL - SWIVABLE: 190 / 45 °
GRINDING WHEEL ADJUSTMENT: 260 MM
GRINDING WHEEL SPEED: 6 M/MIN
CONTROL: GE FANUC POWER MATE
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 5 T
DIMENSIONS OF THE MACHINE CA.: 4,1X2,6X2,2 M




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-grinding length:    400 mm<br/>grinding width:    163 mm<br/>workpiece height:        mm<br/>--------------------------------------------------:  <br/>working range surface grinding:  <br/>- grinding length:    400 mm<br/>- grinding width:    163 mm<br/>- vertical travel:    200 mm<br/>table (surface grinding):  <br/>- magnetic table: yes:        <br/>magnetic table:  <br/>- length:    350 mm<br/>- width:    150 mm<br/>- height:     50 mm<br/>spindlestock grinding spindle:  <br/>- x-axis travel:    483 mm<br/>- y-axis travel:    171 mm<br/>- z-axis travel:    279 mm<br/>- spindle revolutions (max):   2800 /min<br/>grinding tool:  <br/>- type of grinding tool: wheel:        <br/>- diameter (max):    178 mm<br/>- borehole: diameter:     32 mm<br/>- width:     13 mm<br/>electrical specifications:  <br/>- total power consumption:    1.5 kw<br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   1650 mm<br/>- space requirements -front/back-:    825 mm<br/>- total weight approx.:    800 kg<br/>last overhaul: 2018<br/>electrical and mechanical reconstruction of the machine<br/>delivery time: 4-5 months from order confirmation<br/><br/><br/><br/><br/> GRINDING LENGTH: 400 MM
GRINDING WIDTH: 163 MM
WORKPIECE HEIGHT: MM
--------------------------------------------------:
WORKING RANGE SURFACE GRINDING:
- GRINDING LENGTH: 400 MM
- GRINDING WIDTH: 163 MM
- VERTICAL TRAVEL: 200 MM
TABLE (SURFACE GRINDING):
- MAGNETIC TABLE: YES:
MAGNETIC TABLE:
- LENGTH: 350 MM
- WIDTH: 150 MM
- HEIGHT: 50 MM
SPINDLESTOCK GRINDING SPINDLE:
- X-AXIS TRAVEL: 483 MM
- Y-AXIS TRAVEL: 171 MM
- Z-AXIS TRAVEL: 279 MM
- SPINDLE REVOLUTIONS (MAX): 2800 /MIN
GRINDING TOOL:
- TYPE OF GRINDING TOOL: WHEEL:
- DIAMETER (MAX): 178 MM
- BOREHOLE: DIAMETER: 32 MM
- WIDTH: 13 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 1.5 KW
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 1650 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 825 MM
- TOTAL WEIGHT APPROX.: 800 KG
LAST OVERHAUL: 2018
ELECTRICAL AND MECHANICAL RECONSTRUCTION OF THE MACHINE
DELIVERY TIME: 4-5 MONTHS FROM ORDER CONFIRMATION




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 152 mm<br/>grinding length: 457 mm<br/>centre height: - mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1,72 t<br/>dimensions of the machine ca.:  m<br/>tailstock:  <br/><br/><br/><br/><br/> GRINDING DIAMETER: 152 MM
GRINDING LENGTH: 457 MM
CENTRE HEIGHT: - MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1,72 T
DIMENSIONS OF THE MACHINE CA.: M
TAILSTOCK:




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-grinding diameter: 152 mm<br/>grinding length: - mm<br/>centre height: - mm<br/>table movement: 280 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1,53 t<br/>dimensions of the machine ca.:  m<br/>equipment:<br/>1 piece flange including grinding wheel<br/><br/><br/><br/><br/> GRINDING DIAMETER: 152 MM
GRINDING LENGTH: - MM
CENTRE HEIGHT: - MM
TABLE MOVEMENT: 280 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1,53 T
DIMENSIONS OF THE MACHINE CA.: M
EQUIPMENT:
1 PIECE FLANGE INCLUDING GRINDING WHEEL




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-grinding length: 483 mm<br/>grinding width: 171 mm<br/>workpiece height: 406 mm<br/>table surface area: 457 x 152 mm<br/>grinding wheel size: 200 x 19 x 31,75 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1 t<br/>dimensions: 1,65 x 1,17 x 1,88 m<br/><br/><br/><br/><br/> GRINDING LENGTH: 483 MM
GRINDING WIDTH: 171 MM
WORKPIECE HEIGHT: 406 MM
TABLE SURFACE AREA: 457 X 152 MM
GRINDING WHEEL SIZE: 200 X 19 X 31,75 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1 T
DIMENSIONS: 1,65 X 1,17 X 1,88 M




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-grinding length: 450 mm<br/>grinding width: 150 mm<br/>workpiece height: 350 mm<br/>grinding spindle speed: 2640 u/min<br/>grinding wheel size: 200 x 20 x 31,75 mm<br/>table speed -stepless-: 1 - 25 m/min<br/>vertical feeds:: 0,06 - 3000 mm/hub<br/>grinding wheel motor: 1,5 kw<br/>control: osai allen-bradley 8600 v <br/>total power requirement:  kw<br/>weight of the machine ca.: 1,5 t<br/>dimensions: 1,5 x 1,4 x 2,02 m<br/>accessories: permanent magnetic plate 450 x 150 mm, grinding wheel with flange,<br/>             wheel trueing attachment, extraction, wet grinding attachment<br/><br/><br/><br/><br/> GRINDING LENGTH: 450 MM
GRINDING WIDTH: 150 MM
WORKPIECE HEIGHT: 350 MM
GRINDING SPINDLE SPEED: 2640 U/MIN
GRINDING WHEEL SIZE: 200 X 20 X 31,75 MM
TABLE SPEED -STEPLESS-: 1 - 25 M/MIN
VERTICAL FEEDS:: 0,06 - 3000 MM/HUB
GRINDING WHEEL MOTOR: 1,5 KW
CONTROL: OSAI ALLEN-BRADLEY 8600 V
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1,5 T
DIMENSIONS: 1,5 X 1,4 X 2,02 M
ACCESSORIES: PERMANENT MAGNETIC PLATE 450 X 150 MM, GRINDING WHEEL WITH FLANGE,
WHEEL TRUEING ATTACHMENT, EXTRACTION, WET GRINDING ATTACHMENT




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-<br>grinding length: 609 mm<br>grinding width: 200 mm<br>grinding height: 305 mm<br>wheel diameter: 254 mm <br>jones shipman 1400<br />
surface grinding machine <br />
technical data<br />
grinding length	609 	mm <br />
grinding width	200 	mm <br />
grinding height	305 	mm <br />
execution:	 	 <br />
    hydraulic	 	 <br />
max. distance from table	 	 <br />
    to spindle-centreline	510 	mm <br />
longitudinal travel (x-axis)	483 	mm <br />
transversal travel (y axis)	171 	mm <br />
table speeds:	 	 <br />
    stepless	 	 <br />
       from	1 	m/min <br />
       up to	25 	m/min <br />
automatic vertical feed:	 	 <br />
    from	0.001 	mm <br />
    up to	0.0125 	mm <br />
vertical rapid traverse	0.3 	m/min <br />
diameter of grinding wheel	254 	mm <br />
width of the grinding wheel	25 	mm <br />
wheel int. diameter	76.2 	mm <br />
grinding wheel speeds:	 	 <br />
       from	2480 	rpm <br />
voltage 50 hz 3x	380 	volt 
GRINDING LENGTH: 609 MM
GRINDING WIDTH: 200 MM
GRINDING HEIGHT: 305 MM
WHEEL DIAMETER: 254 MM
JONES SHIPMAN 1400
SURFACE GRINDING MACHINE&NBSP;
TECHNICAL DATA
GRINDING LENGTH 609 MM&NBSP;
GRINDING WIDTH 200 MM&NBSP;
GRINDING HEIGHT 305 MM&NBSP;
EXECUTION: &NBSP;
&NBSP; &NBSP; HYDRAULIC &NBSP;
MAX. DISTANCE FROM TABLE &NBSP;
&NBSP; &NBSP; TO SPINDLE-CENTRELINE 510 MM&NBSP;
LONGITUDINAL TRAVEL (X-AXIS) 483 MM&NBSP;
TRANSVERSAL TRAVEL (Y AXIS) 171 MM&NBSP;
TABLE SPEEDS: &NBSP;
&NBSP; &NBSP; STEPLESS &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 1 M/MIN&NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;UP TO 25 M/MIN&NBSP;
AUTOMATIC VERTICAL FEED: &NBSP;
&NBSP; &NBSP; FROM 0.001 MM&NBSP;
&NBSP; &NBSP; UP TO 0.0125 MM&NBSP;
VERTICAL RAPID TRAVERSE 0.3 M/MIN&NBSP;
DIAMETER OF GRINDING WHEEL 254 MM&NBSP;
WIDTH OF THE GRINDING WHEEL 25 MM&NBSP;
WHEEL INT. DIAMETER 76.2 MM&NBSP;
GRINDING WHEEL SPEEDS: &NBSP;
&NBSP; &NBSP; &NBSP; &NBSP;FROM 2480 RPM&NBSP;
VOLTAGE 50 HZ 3X 380 VOLT&NBSP;
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-<br>grinding length (mm) 483<br>grinding width (mm) 171<br>grinding height (mm) 406<br>wheel diameter (mm) 200<br>
GRINDING LENGTH (MM) 483
GRINDING WIDTH (MM) 171
GRINDING HEIGHT (MM) 406
WHEEL DIAMETER (MM) 200
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-alen bradley osai<br>grinding length (mm) 609<br>grinding width (mm) 609<br>grinding height (mm) <br>wheel diameter (mm) 250<br> ALEN BRADLEY OSAI
GRINDING LENGTH (MM) 609
GRINDING WIDTH (MM) 609
GRINDING HEIGHT (MM)
WHEEL DIAMETER (MM) 250
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-alen bradley osai<br>grinding length (mm) 457<br>grinding width (mm) 152<br>grinding height (mm) <br>wheel diameter (mm) 200<br> ALEN BRADLEY OSAI
GRINDING LENGTH (MM) 457
GRINDING WIDTH (MM) 152
GRINDING HEIGHT (MM)
WHEEL DIAMETER (MM) 200
Vendedor: Muller Machines SA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more JONES types: