266 ofertas

Año de construcción: usado
Ubicación: Land-used 150 kva generator set consists of a deutz f8l413f engine and a stamford c408 generator.

please contact us regarding pricing and availability. USED 150 KVA GENERATOR SET CONSISTS OF A DEUTZ F8L413F ENGINE AND A STAMFORD C408 GENERATOR. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1950 x 850 x 1350 mm<br/>description: turning diameter over bed: 420mm turning diameter over slide rest: 250mm turning length: 1000mm turning dia. in gap: 580mm speeds: 45 - 1800u/min centre height: 210mm spindle bore: 52mm tailstock quill taper mt: 4 total power requirement: 4,4kw 3-axis digital display 4-fold steel holder 3-jaw chuck 200mm 4-jaw plate chuck 250mm clamping disc 350mm standing and moving bezel coolant system chip tray and splash guard wall WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1950 X 850 X 1350 MM
DESCRIPTION: TURNING DIAMETER OVER BED: 420MM TURNING DIAMETER OVER SLIDE REST: 250MM TURNING LENGTH: 1000MM TURNING DIA. IN GAP: 580MM SPEEDS: 45 - 1800U/MIN CENTRE HEIGHT: 210MM SPINDLE BORE: 52MM TAILSTOCK QUILL TAPER MT: 4 TOTAL POWER REQUIREMENT: 4,4KW 3-AXIS DIGITAL DISPLAY 4-FOLD STEEL HOLDER 3-JAW CHUCK 200MM 4-JAW PLATE CHUCK 250MM CLAMPING DISC 350MM STANDING AND MOVING BEZEL COOLANT SYSTEM CHIP TRAY AND SPLASH GUARD WALL
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 24.999 €
Ubicación: Land-emergency unit 865 hours only
in 40 ft container complete unit EMERGENCY UNIT 865 HOURS ONLY IN 40 FT CONTAINER COMPLETE UNIT
Vendedor: Techno-Commerce GmbH
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 45 mm<br/>throat: 350 mm<br/>bore stroke: 125 mm<br/>spindle taper: sk 40 <br/>spindle turning speed range: 75 - 3200 u/min<br/>: 650 mm<br/>: 350 mm<br/>table surface area: 900 x 250 mm<br/>connected load frequency: 400 v<br/>diameter of hob: max. 80 mm<br/>total power requirement: 1,1/1,5 kw<br/>weight of the machine ca.: 0,65 t<br/>dimensions of the machine ca.: 1,2 x 1.2 x 1,5 m<br/>drilling and milling machine<br/>- cross support<br/>- cabinet<br/>- swivel spindle head left / right 90 °<br/>- feed via hand crank<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 45 MM
THROAT: 350 MM
BORE STROKE: 125 MM
SPINDLE TAPER: SK 40
SPINDLE TURNING SPEED RANGE: 75 - 3200 U/MIN
: 650 MM
: 350 MM
TABLE SURFACE AREA: 900 X 250 MM
CONNECTED LOAD FREQUENCY: 400 V
DIAMETER OF HOB: MAX. 80 MM
TOTAL POWER REQUIREMENT: 1,1/1,5 KW
WEIGHT OF THE MACHINE CA.: 0,65 T
DIMENSIONS OF THE MACHINE CA.: 1,2 X 1.2 X 1,5 M
DRILLING AND MILLING MACHINE
- CROSS SUPPORT
- CABINET
- SWIVEL SPINDLE HEAD LEFT / RIGHT 90 °
- FEED VIA HAND CRANK




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 24.999 €
Ubicación: Land-emergency unit 760 hours only
700 kva 400 v
weight 5,6 t
 EMERGENCY UNIT 760 HOURS ONLY 700 KVA 400 V WEIGHT 5,6 T
Vendedor: Techno-Commerce GmbH
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 40 mm<br/>throat: 290 mm<br/>bore stroke: 130 mm<br/>spindle taper: sk 40 <br/>spindle turning speed range: 75 - 3200 u/min<br/>: 500 mm<br/>: 230 mm<br/>table surface area: 720 x 210 mm<br/>connected load frequency: 400 v<br/>diameter of hob: max. 80 mm<br/>total power requirement: 1,1 kw<br/>weight of the machine ca.: 0,35 t<br/>dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m<br/>drilling and milling machine<br/>- cross support<br/>- cabinet<br/>- swivel spindle head left / right 90 °<br/>- feed via hand crank<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 40 MM
THROAT: 290 MM
BORE STROKE: 130 MM
SPINDLE TAPER: SK 40
SPINDLE TURNING SPEED RANGE: 75 - 3200 U/MIN
: 500 MM
: 230 MM
TABLE SURFACE AREA: 720 X 210 MM
CONNECTED LOAD FREQUENCY: 400 V
DIAMETER OF HOB: MAX. 80 MM
TOTAL POWER REQUIREMENT: 1,1 KW
WEIGHT OF THE MACHINE CA.: 0,35 T
DIMENSIONS OF THE MACHINE CA.: 1,1 X 0,9 X 1,2 M
DRILLING AND MILLING MACHINE
- CROSS SUPPORT
- CABINET
- SWIVEL SPINDLE HEAD LEFT / RIGHT 90 °
- FEED VIA HAND CRANK




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 65.000 
Ubicación: Land-generator catterpillar  
caterpillar 3412 
in contenaire 40 ft  included double skin of 15 m3 containers 20 feet.
engine : 3412 sta2
alternator : sr4
hours : only 500 
kva : 800 
year :2003
serial num : 1ez
good condition   available now 
price ex works france 65  000€  € loaded on truck

 GENERATOR CATTERPILLAR CATERPILLAR 3412 IN CONTENAIRE 40 FT INCLUDED DOUBLE SKIN OF 15 M3 CONTAINERS 20 FEET. ENGINE : 3412 STA2 ALTERNATOR : SR4 HOURS : ONLY 500 KVA : 800 YEAR :2003 SERIAL NUM : 1EZ GOOD CONDITION AVAILABLE NOW PRICE EX WORKS FRANCE 65 000€ € LOADED ON TRUCK
Vendedor: Mondial Energy Services
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 40 mm<br/>throat: 290 mm<br/>bore stroke: 130 mm<br/>spindle taper: sk 40 <br/>spindle turning speed range: 70 - 3200 u/min<br/>: 520 mm<br/>: 230 mm<br/>table surface area: 730 x 210 mm<br/>connected load frequency: 400 v<br/>total power requirement: 1,1/1,5 kw<br/>weight of the machine ca.: 0,32 t<br/>dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m<br/>drilling and milling machine<br/>- cross support<br/>- cabinet<br/>- swivel spindle head left / right 90 °<br/>- feed via hand crank<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 40 MM
THROAT: 290 MM
BORE STROKE: 130 MM
SPINDLE TAPER: SK 40
SPINDLE TURNING SPEED RANGE: 70 - 3200 U/MIN
: 520 MM
: 230 MM
TABLE SURFACE AREA: 730 X 210 MM
CONNECTED LOAD FREQUENCY: 400 V
TOTAL POWER REQUIREMENT: 1,1/1,5 KW
WEIGHT OF THE MACHINE CA.: 0,32 T
DIMENSIONS OF THE MACHINE CA.: 1,1 X 0,9 X 1,15 M
DRILLING AND MILLING MACHINE
- CROSS SUPPORT
- CABINET
- SWIVEL SPINDLE HEAD LEFT / RIGHT 90 °
- FEED VIA HAND CRANK




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 32.000 
Ubicación: Land-for sale perkins 800 kva only 100 hours year 2000 soundproof  FOR SALE PERKINS 800 KVA ONLY 100 HOURS YEAR 2000 SOUNDPROOF
Vendedor: Mondial Energy Services
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 50 mm<br/>throat: 360 mm<br/>bore stroke: 150 mm<br/>spindle turning speed range: 120 - 3000 u/min<br/>spindle taper: sk 40 <br/>: 650 mm<br/>: 320 mm<br/>vertical adjustment: 500 mm<br/>table surface area: 1000 x 300 mm<br/>connected load frequency: 400 v<br/>diameter of hob: max. 80 mm<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 0,85 t<br/>dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m<br/>new model industrial drilling and milling machine with manual transmission and <br/>high speed range. the prism guide in the z-axis ensures a high degree of <br/>precision even in the most difficult milling jobs.<br/><br/>domestic equipments:<br/>? automatic feed in x-axis<br/>? 3-axis digital display<br/>? motorized z-axis<br/>? feed in quill<br/>? left-right-run high<br/>? tapping attachment<br/>? gear head swiveling<br/>? coolant system<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 50 MM
THROAT: 360 MM
BORE STROKE: 150 MM
SPINDLE TURNING SPEED RANGE: 120 - 3000 U/MIN
SPINDLE TAPER: SK 40
: 650 MM
: 320 MM
VERTICAL ADJUSTMENT: 500 MM
TABLE SURFACE AREA: 1000 X 300 MM
CONNECTED LOAD FREQUENCY: 400 V
DIAMETER OF HOB: MAX. 80 MM
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 0,85 T
DIMENSIONS OF THE MACHINE CA.: 1,25 X 1.5 X 2,3 M
NEW MODEL INDUSTRIAL DRILLING AND MILLING MACHINE WITH MANUAL TRANSMISSION AND
HIGH SPEED RANGE. THE PRISM GUIDE IN THE Z-AXIS ENSURES A HIGH DEGREE OF
PRECISION EVEN IN THE MOST DIFFICULT MILLING JOBS.

DOMESTIC EQUIPMENTS:
? AUTOMATIC FEED IN X-AXIS
? 3-AXIS DIGITAL DISPLAY
? MOTORIZED Z-AXIS
? FEED IN QUILL
? LEFT-RIGHT-RUN HIGH
? TAPPING ATTACHMENT
? GEAR HEAD SWIVELING
? COOLANT SYSTEM




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 10 €
Ubicación: Land-brette 1400x1100x50
1500 pieces
price for 1 piece
0048609130000 BRETTE 1400X1100X50 1500 PIECES PRICE FOR 1 PIECE 0048609130000
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 40 mm<br/>throat: 290 mm<br/>bore stroke: 115 mm<br/>spindle taper: sk 40 <br/>spindle turning speed range: 70 - 3200 u/min<br/>: 350 mm<br/>: 130 mm<br/>table surface area: 590 x 190 mm<br/>connected load frequency: 400 v<br/>diameter of hob: max. 80 mm<br/>feed: 0,1 - 0,18 - 0,26 mm/u<br/>total power requirement: 1,1 kw<br/>weight of the machine ca.: 0,4 t<br/>dimensions of the machine ca.: 0,7 x 0,95 x 1,75 m<br/>drilling and milling machine<br/>- cross support<br/>- cabinet<br/>- swivel spindle head left / right 90 °<br/>- feed via hand crank<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 40 MM
THROAT: 290 MM
BORE STROKE: 115 MM
SPINDLE TAPER: SK 40
SPINDLE TURNING SPEED RANGE: 70 - 3200 U/MIN
: 350 MM
: 130 MM
TABLE SURFACE AREA: 590 X 190 MM
CONNECTED LOAD FREQUENCY: 400 V
DIAMETER OF HOB: MAX. 80 MM
FEED: 0,1 - 0,18 - 0,26 MM/U
TOTAL POWER REQUIREMENT: 1,1 KW
WEIGHT OF THE MACHINE CA.: 0,4 T
DIMENSIONS OF THE MACHINE CA.: 0,7 X 0,95 X 1,75 M
DRILLING AND MILLING MACHINE
- CROSS SUPPORT
- CABINET
- SWIVEL SPINDLE HEAD LEFT / RIGHT 90 °
- FEED VIA HAND CRANK




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 19.900 
Ubicación: Land-
ostertag machine :
2 vibrators on the stamp
4 vibrators on the mould
4 moulds
0048609130000 OSTERTAG MACHINE : 2 VIBRATORS ON THE STAMP 4 VIBRATORS ON THE MOULD 4 MOULDS 0048609130000
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-cutting diameter:350 mm<br/>saw band length:3750 mm<br/>cutting width:380 mm<br/>capacity 90 degrees: square:335 mm<br/>:380 x 260 <br/>dimensions of saw-band:3750 x 34 x 1,1 mm<br/>band speed:20 - 90 m/min<br/>tilting area:90 bis +60 grad<br/>table height:870 mm<br/>total power requirement:3,0 kw<br/>weight of the machine ca.:1,2 t<br/>dimensions of the machine ca.:2,0 x 2,0 x 1,5 m<br/><br/> CUTTING DIAMETER:350 MM
SAW BAND LENGTH:3750 MM
CUTTING WIDTH:380 MM
CAPACITY 90 DEGREES: SQUARE:335 MM
:380 X 260
DIMENSIONS OF SAW-BAND:3750 X 34 X 1,1 MM
BAND SPEED:20 - 90 M/MIN
TILTING AREA:90 BIS +60 GRAD
TABLE HEIGHT:870 MM
TOTAL POWER REQUIREMENT:3,0 KW
WEIGHT OF THE MACHINE CA.:1,2 T
DIMENSIONS OF THE MACHINE CA.:2,0 X 2,0 X 1,5 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-a line for filling and packaging creams:

1. inpucker for jars , type: fes201, producer: groninger, year:2009
2. filler plus 1 mobile hopper, type: dfv 4005, producer: groninger, year: 2005
3. capper, type: mcs202l, producer: groninger, year: 2005
4. unscrambler cap, type:zsk1200 ,producer: groninger, year: 2008
5. container and elevator cap, type: de120, producer: groninger, year: 1994
6. labelling cap, type: gamma, producer: promark, year: 2010
7. depucker, type: omikron, producer: promark, year: 2010
8. labelling base label,type: gamma, producer: promark, year: 2010
9. labelling wrap label,type: gamma, producer: promark, year: 2010
10. printer, type: smart datex10, producer:markem, year: 2008
11. inpucker, type: paxinpacker, producer: unilogo, year: 2010
12. cartoning machine, type:avv, producer: cam, year: 2009
13. mechanical turning  carton, festo, year: 2011
14. overwrapper , type:bfb3701,producer: ima, year: 2008
15. shipper sealing  unit, type:sm11-s, producer: siat, year: 2005                       A LINE FOR FILLING AND PACKAGING CREAMS: 1. INPUCKER FOR JARS , TYPE: FES201, PRODUCER: GRONINGER, YEAR:2009 2. FILLER PLUS 1 MOBILE HOPPER, TYPE: DFV 4005, PRODUCER: GRONINGER, YEAR: 2005 3. CAPPER, TYPE: MCS202L, PRODUCER: GRONINGER, YEAR: 2005 4. UNSCRAMBLER CAP, TYPE:ZSK1200 ,PRODUCER: GRONINGER, YEAR: 2008 5. CONTAINER AND ELEVATOR CAP, TYPE: DE120, PRODUCER: GRONINGER, YEAR: 1994 6. LABELLING CAP, TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 7. DEPUCKER, TYPE: OMIKRON, PRODUCER: PROMARK, YEAR: 2010 8. LABELLING BASE LABEL,TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 9. LABELLING WRAP LABEL,TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 10. PRINTER, TYPE: SMART DATEX10, PRODUCER:MARKEM, YEAR: 2008 11. INPUCKER, TYPE: PAXINPACKER, PRODUCER: UNILOGO, YEAR: 2010 12. CARTONING MACHINE, TYPE:AVV, PRODUCER: CAM, YEAR: 2009 13. MECHANICAL TURNING  CARTON, FESTO, YEAR: 2011 14. OVERWRAPPER , TYPE:BFB3701,PRODUCER: IMA, YEAR: 2008 15. SHIPPER SEALING  UNIT, TYPE:SM11-S, PRODUCER: SIAT, YEAR: 2005                      
Vendedor: Biovesta
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 40 mm<br/>throat: 360 mm<br/>bore stroke: 200 mm<br/>spindle taper mt: 4 mk<br/>table:: 445 x 435 mm<br/>column diameter: 180 mm<br/>turning speeds: 50 - 2200 u/min<br/>feeds: 0,08 - 0,50 mm/u<br/>total power requirement: 3,0 kw<br/>weight of the machine ca.: 705 kg.<br/>range l-w-h: 1,15 x 0,7 x 2,36 mm<br/>high-quality drill press for industrial use.<br/>the machine is also suitable for multi-shift operation.<br/>automatic quill feed,<br/>digital depth display,<br/>coolant device, led operating light,<br/>electric table drive,<br/>german operating manual,<br/>ce declaration of conformity<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 40 MM
THROAT: 360 MM
BORE STROKE: 200 MM
SPINDLE TAPER MT: 4 MK
TABLE:: 445 X 435 MM
COLUMN DIAMETER: 180 MM
TURNING SPEEDS: 50 - 2200 U/MIN
FEEDS: 0,08 - 0,50 MM/U
TOTAL POWER REQUIREMENT: 3,0 KW
WEIGHT OF THE MACHINE CA.: 705 KG.
RANGE L-W-H: 1,15 X 0,7 X 2,36 MM
HIGH-QUALITY DRILL PRESS FOR INDUSTRIAL USE.
THE MACHINE IS ALSO SUITABLE FOR MULTI-SHIFT OPERATION.
AUTOMATIC QUILL FEED,
DIGITAL DEPTH DISPLAY,
COOLANT DEVICE, LED OPERATING LIGHT,
ELECTRIC TABLE DRIVE,
GERMAN OPERATING MANUAL,
CE DECLARATION OF CONFORMITY




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-please let me introduce to you the following diesel engine generator  x 2sets:

diesel engine:
daihatsu
year:2003
type: 6dk-36
2895kw
 
generator:
nishishiba
type: ntakl
year: 2003
3-phase
3300v
2750kwe
50hz

attached are pictures for your reference.
do not hesitate to contact us with any other queries.  PLEASE LET ME INTRODUCE TO YOU THE FOLLOWING DIESEL ENGINE GENERATOR X 2SETS: DIESEL ENGINE: DAIHATSU YEAR:2003 TYPE: 6DK-36 2895KW GENERATOR: NISHISHIBA TYPE: NTAKL YEAR: 2003 3-PHASE 3300V 2750KWE 50HZ ATTACHED ARE PICTURES FOR YOUR REFERENCE. DO NOT HESITATE TO CONTACT US WITH ANY OTHER QUERIES.
Vendedor: Heeyas Limited London
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 420 mm<br/>turning diameter over slide rest: 250 mm<br/>turning length: 1000 mm<br/>turning diameter in the gap: 580 mm<br/>turning speeds: 45 - 1800 u/min<br/>centre height: 210 mm<br/>spindle bore: 52 mm<br/>tailstock quill taper mt: 4 mk<br/>total power requirement: 4,4 kw<br/>weight of the machine ca.: 1,5 t<br/>dimensions: 1,95 x 0,85 x 1,35 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 420 MM
TURNING DIAMETER OVER SLIDE REST: 250 MM
TURNING LENGTH: 1000 MM
TURNING DIAMETER IN THE GAP: 580 MM
TURNING SPEEDS: 45 - 1800 U/MIN
CENTRE HEIGHT: 210 MM
SPINDLE BORE: 52 MM
TAILSTOCK QUILL TAPER MT: 4 MK
TOTAL POWER REQUIREMENT: 4,4 KW
WEIGHT OF THE MACHINE CA.: 1,5 T
DIMENSIONS: 1,95 X 0,85 X 1,35 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-1250 kw cummins super silent enclosed diesel power packages
fifteen (15) cummins qsk45 diesel engine, stamford generator, 1250 kw, 50 hz/60 hz, dual frequency, 20 ft. super silent soundproof isolated enclosed packages, lots of options with these power packages. built in fuel tanks, integrated exhaust system, integrated radiator water cooled system, control system, synchronization system to connect with the main power or other generator sets, certified for shipping world wide as a normal shipping container. excellent condition, priced for immediate sale. contact us for more information before they are sold.
1250 KW CUMMINS SUPER SILENT ENCLOSED DIESEL POWER PACKAGES FIFTEEN (15) CUMMINS QSK45 DIESEL ENGINE, STAMFORD GENERATOR, 1250 KW, 50 HZ/60 HZ, DUAL FREQUENCY, 20 FT. SUPER SILENT SOUNDPROOF ISOLATED ENCLOSED PACKAGES, LOTS OF OPTIONS WITH THESE POWER PACKAGES. BUILT IN FUEL TANKS, INTEGRATED EXHAUST SYSTEM, INTEGRATED RADIATOR WATER COOLED SYSTEM, CONTROL SYSTEM, SYNCHRONIZATION SYSTEM TO CONNECT WITH THE MAIN POWER OR OTHER GENERATOR SETS, CERTIFIED FOR SHIPPING WORLD WIDE AS A NORMAL SHIPPING CONTAINER. EXCELLENT CONDITION, PRICED FOR IMMEDIATE SALE. CONTACT US FOR MORE INFORMATION BEFORE THEY ARE SOLD.
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 660 mm<br/>turning diameter over slide rest: 420 mm<br/>turning diameter in the gap: 840 mm<br/>turning length: 2000 mm<br/>turning speed range: 36-1600 u/min<br/>spindle bore: 103 mm<br/>longitudinal feeds: 0,063-2,52 mm/u<br/>face feeds: 0,027-1,07 mm/u<br/>metric threading: 1-14 mm<br/>pinole diameter: 75 mm<br/>quill travel: 150 mm<br/>quill: mk 5 <br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 2.600 kg<br/>dimensions of the machine ca.: 3700x1000x1450 mm<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 660 MM
TURNING DIAMETER OVER SLIDE REST: 420 MM
TURNING DIAMETER IN THE GAP: 840 MM
TURNING LENGTH: 2000 MM
TURNING SPEED RANGE: 36-1600 U/MIN
SPINDLE BORE: 103 MM
LONGITUDINAL FEEDS: 0,063-2,52 MM/U
FACE FEEDS: 0,027-1,07 MM/U
METRIC THREADING: 1-14 MM
PINOLE DIAMETER: 75 MM
QUILL TRAVEL: 150 MM
QUILL: MK 5
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 2.600 KG
DIMENSIONS OF THE MACHINE CA.: 3700X1000X1450 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-unused
several units available UNUSED SEVERAL UNITS AVAILABLE
Vendedor: Flanders surplus NV
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 660 mm<br/>turning diameter over slide rest: 420 mm<br/>turning length: 2000 mm<br/>turning diameter in the gap: 840 mm<br/>turning speeds: 36 - 1600 u/min<br/>centre height: 330 mm<br/>spindle bore: 1ß3 mm<br/>tailstock quill taper mt: 5 mk<br/>tailstock travel: 150 mm<br/>tailstock quill diameter: 75 mm<br/>total power requirement: 11 kw<br/>weight of the machine ca.: 3,2 t<br/>dimensions of the machine ca.: 3,6 x 1,1 x 1,45 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 660 MM
TURNING DIAMETER OVER SLIDE REST: 420 MM
TURNING LENGTH: 2000 MM
TURNING DIAMETER IN THE GAP: 840 MM
TURNING SPEEDS: 36 - 1600 U/MIN
CENTRE HEIGHT: 330 MM
SPINDLE BORE: 1ß3 MM
TAILSTOCK QUILL TAPER MT: 5 MK
TAILSTOCK TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 75 MM
TOTAL POWER REQUIREMENT: 11 KW
WEIGHT OF THE MACHINE CA.: 3,2 T
DIMENSIONS OF THE MACHINE CA.: 3,6 X 1,1 X 1,45 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-concrete stone molds for garden and landscape
rectangle 60x40cm solid brick, rectangular 30x40cm half stone
board size (minimum) 1400x950mm CONCRETE STONE MOLDS FOR GARDEN AND LANDSCAPE RECTANGLE 60X40CM SOLID BRICK, RECTANGULAR 30X40CM HALF STONE BOARD SIZE (MINIMUM) 1400X950MM
Vendedor: Stöcker Beton GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1000 mm<br/>y-travel: 300 mm<br/>z-travel: 400 mm<br/>table-size: 1320 x 360 mm<br/>spindle taper iso: 40 <br/>spindle turning speed range: 58 - 1800 u/min<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 2,3 t<br/>dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m<br/><br/><br/><br/><br/> X-TRAVEL: 1000 MM
Y-TRAVEL: 300 MM
Z-TRAVEL: 400 MM
TABLE-SIZE: 1320 X 360 MM
SPINDLE TAPER ISO: 40
SPINDLE TURNING SPEED RANGE: 58 - 1800 U/MIN
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 2,3 T
DIMENSIONS OF THE MACHINE CA.: 2,1 X 2,1 X 1,95 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-omag tronic concrete block / pavingstone machine, 1996.

the package incl: elevator system 10 stages. lowerator. pallet feeding device. cuber unit. pallet magazine. pallet turning device. cleaning brush. stacking device. complete finger car system. foil wrapping device. many moulds!! super price for quick response!! can be seen after appointment.

amexpo consult
merkurvej 31
9370 hals - denmark
phone: +45 29251017 OMAG TRONIC CONCRETE BLOCK / PAVINGSTONE MACHINE, 1996. THE PACKAGE INCL: ELEVATOR SYSTEM 10 STAGES. LOWERATOR. PALLET FEEDING DEVICE. CUBER UNIT. PALLET MAGAZINE. PALLET TURNING DEVICE. CLEANING BRUSH. STACKING DEVICE. COMPLETE FINGER CAR SYSTEM. FOIL WRAPPING DEVICE. MANY MOULDS!! SUPER PRICE FOR QUICK RESPONSE!! CAN BE SEEN AFTER APPOINTMENT. AMEXPO CONSULT MERKURVEJ 31 9370 HALS - DENMARK PHONE: +45 29251017
Vendedor: Amexpo Consult
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 500 mm<br/>turning diameter over slide rest: 300 mm<br/>turning length: 1500 mm<br/>turning diameter in the gap: 710 mm<br/>turning speeds: 36 - 1600 u/min<br/>centre height: 250 mm<br/>spindle bore: 100 mm<br/>tailstock quill taper mt: 5 mk<br/>tailstock travel: 150 mm<br/>tailstock quill diameter: 75 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 3,45 t<br/>dimensions of the machine ca.: 3,1 x 1,1 x 1,4 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 500 MM
TURNING DIAMETER OVER SLIDE REST: 300 MM
TURNING LENGTH: 1500 MM
TURNING DIAMETER IN THE GAP: 710 MM
TURNING SPEEDS: 36 - 1600 U/MIN
CENTRE HEIGHT: 250 MM
SPINDLE BORE: 100 MM
TAILSTOCK QUILL TAPER MT: 5 MK
TAILSTOCK TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 75 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 3,45 T
DIMENSIONS OF THE MACHINE CA.: 3,1 X 1,1 X 1,4 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 150.000 USD
Ubicación: Land-there are presently 63 containerized cummins generator sets. diesel fuel. stamford alternator. 20 ft sound proof container with paralleling controls. fuel tank.

-26 units powered by kta50-g3 engine rated 1140kw 400v 1500 rpm. they are capable dual frequency 50/60 hz.

year of manufacture 2010 with less than 1500 hours since new.

-37 units powered by qsk45 engine rated 1000 kw 400v 1500 rpm. they are capable dual frequency 50/60 hz.

year of manufacture 2011 with less than 1800 hours since new. stamford alternator. 20 ft sound proof container with paralleling controls. fuel tank.

price per unit: usd $150,000

THERE ARE PRESENTLY 63 CONTAINERIZED CUMMINS GENERATOR SETS. DIESEL FUEL. STAMFORD ALTERNATOR. 20 FT SOUND PROOF CONTAINER WITH PARALLELING CONTROLS. FUEL TANK. -26 UNITS POWERED BY KTA50-G3 ENGINE RATED 1140KW 400V 1500 RPM. THEY ARE CAPABLE DUAL FREQUENCY 50/60 HZ. YEAR OF MANUFACTURE 2010 WITH LESS THAN 1500 HOURS SINCE NEW. -37 UNITS POWERED BY QSK45 ENGINE RATED 1000 KW 400V 1500 RPM. THEY ARE CAPABLE DUAL FREQUENCY 50/60 HZ. YEAR OF MANUFACTURE 2011 WITH LESS THAN 1800 HOURS SINCE NEW. STAMFORD ALTERNATOR. 20 FT SOUND PROOF CONTAINER WITH PARALLELING CONTROLS. FUEL TANK. PRICE PER UNIT: USD $150,000
Vendedor: MPC ENGINEERING GMBH
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 32 mm<br/>throat: 320 mm<br/>bore stroke: 155 mm<br/>spindle taper mt: 4 mk<br/>table:: 500 x 420 mm<br/>column diameter: 120 mm<br/>turning speeds: 125 - 3030 u/min<br/>feeds: 0,1 - 0,2 - 0,3 mm/u<br/>total power requirement: 1,2 kw<br/>weight of the machine ca.: 540 kg.<br/>range l-w-h: 0,8 x 0,55 x 2,2 mm<br/>? machine base for clamping high workpieces<br/>? digital depth gauge<br/>? gearbox swivels 180 °<br/>? silent running through geärtete, ground oil-cooled gears<br/>? tapping function<br/>? electromagnetic clutch for drill feed<br/>? automatic feed<br/>? electric drive for table height adjustment<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 32 MM
THROAT: 320 MM
BORE STROKE: 155 MM
SPINDLE TAPER MT: 4 MK
TABLE:: 500 X 420 MM
COLUMN DIAMETER: 120 MM
TURNING SPEEDS: 125 - 3030 U/MIN
FEEDS: 0,1 - 0,2 - 0,3 MM/U
TOTAL POWER REQUIREMENT: 1,2 KW
WEIGHT OF THE MACHINE CA.: 540 KG.
RANGE L-W-H: 0,8 X 0,55 X 2,2 MM
? MACHINE BASE FOR CLAMPING HIGH WORKPIECES
? DIGITAL DEPTH GAUGE
? GEARBOX SWIVELS 180 °
? SILENT RUNNING THROUGH GEäRTETE, GROUND OIL-COOLED GEARS
? TAPPING FUNCTION
? ELECTROMAGNETIC CLUTCH FOR DRILL FEED
? AUTOMATIC FEED
? ELECTRIC DRIVE FOR TABLE HEIGHT ADJUSTMENT




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-brand new two sets available 
year built 2016
rpm 900
kw 1040
generator
kw 980
volts 450
hz 60 BRAND NEW TWO SETS AVAILABLE YEAR BUILT 2016 RPM 900 KW 1040 GENERATOR KW 980 VOLTS 450 HZ 60
Vendedor: Heeyas Limited London
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 330 mm<br/>turning diameter over slide rest: 210 mm<br/>turning length: 635 mm<br/>turning diameter in the gap: 480 mm<br/>turning speeds: 58 - 2500 u/min<br/>centre height: 167 mm<br/>spindle bore: 40 mm<br/>tailstock quill taper mt: 3 mk<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 0,8 t<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 330 MM
TURNING DIAMETER OVER SLIDE REST: 210 MM
TURNING LENGTH: 635 MM
TURNING DIAMETER IN THE GAP: 480 MM
TURNING SPEEDS: 58 - 2500 U/MIN
CENTRE HEIGHT: 167 MM
SPINDLE BORE: 40 MM
TAILSTOCK QUILL TAPER MT: 3 MK
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 0,8 T
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land- the machine can produce all elements of up to 500mm on a vibrating table with dimensions not exceeding 1000mm x 1000. elements of up to 800mm without vibrating table directly on the floor.machine for the produce paving stones, curbs, edges, lawns, bricks, palisades . it has a completely new automatic control warranty. includes 3 different molds for palisades, lawn garden. THE MACHINE CAN PRODUCE ALL ELEMENTS OF UP TO 500MM ON A VIBRATING TABLE WITH DIMENSIONS NOT EXCEEDING 1000MM X 1000. ELEMENTS OF UP TO 800MM WITHOUT VIBRATING TABLE DIRECTLY ON THE FLOOR.MACHINE FOR THE PRODUCE PAVING STONES, CURBS, EDGES, LAWNS, BRICKS, PALISADES . IT HAS A COMPLETELY NEW AUTOMATIC CONTROL WARRANTY. INCLUDES 3 DIFFERENT MOLDS FOR PALISADES, LAWN GARDEN.
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-width of the strips: 75 mm<br/>band length: 2000 mm<br/>band speed: 15 / 30 m/sek.<br/>work height max.: 600 - 1200 mm<br/>total power requirement: 2,4 / 3,0 kw<br/>weight of the machine ca.: 0,125 t<br/>dimensions of the machine ca.: 1,15 x 0,65 x 0,67 m<br/><br/><br/><br/><br/> WIDTH OF THE STRIPS: 75 MM
BAND LENGTH: 2000 MM
BAND SPEED: 15 / 30 M/SEK.
WORK HEIGHT MAX.: 600 - 1200 MM
TOTAL POWER REQUIREMENT: 2,4 / 3,0 KW
WEIGHT OF THE MACHINE CA.: 0,125 T
DIMENSIONS OF THE MACHINE CA.: 1,15 X 0,65 X 0,67 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-block making machine masa 9000. 4 moulds, 800 production boards 1400x950, control cabinet. 0048609130000 BLOCK MAKING MACHINE MASA 9000. 4 MOULDS, 800 PRODUCTION BOARDS 1400X950, CONTROL CABINET. 0048609130000
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 40 mm<br/>throat: 370 mm<br/>bore stroke: 200 mm<br/>spindle taper mt: 4 mk<br/>table:: 580 x 460 mm<br/>column diameter: 160 mm<br/>turning speeds: 75 - 2020 u/min<br/>feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/u<br/>total power requirement: 1,5 kw<br/>weight of the machine ca.: 700 kg.<br/>range l-w-h: 1,1 x 0,6 x 2,35 mm<br/>? machine base for clamping high workpieces<br/>? digital depth gauge<br/>? gearbox swivels 180 °<br/>? silent running through geärtete, ground oil-cooled gears<br/>? tapping function<br/>? electromagnetic clutch for drill feed<br/>? automatic feed<br/>? electric drive for table height adjustment<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 40 MM
THROAT: 370 MM
BORE STROKE: 200 MM
SPINDLE TAPER MT: 4 MK
TABLE:: 580 X 460 MM
COLUMN DIAMETER: 160 MM
TURNING SPEEDS: 75 - 2020 U/MIN
FEEDS: 0,1 - 0,2 - 0,3 - 0,4 MM/U
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 700 KG.
RANGE L-W-H: 1,1 X 0,6 X 2,35 MM
? MACHINE BASE FOR CLAMPING HIGH WORKPIECES
? DIGITAL DEPTH GAUGE
? GEARBOX SWIVELS 180 °
? SILENT RUNNING THROUGH GEäRTETE, GROUND OIL-COOLED GEARS
? TAPPING FUNCTION
? ELECTROMAGNETIC CLUTCH FOR DRILL FEED
? AUTOMATIC FEED
? ELECTRIC DRIVE FOR TABLE HEIGHT ADJUSTMENT




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 16.500 €
Ubicación: Land-vibrating table baumgartner. year of manufacture 2000. the table was not used. hydraulic station, control cabinet, feeders. the table has 12 vibrators. working area of 7 m x 2.5 m. if you have any questions feel free to contact us. 609130000 VIBRATING TABLE BAUMGARTNER. YEAR OF MANUFACTURE 2000. THE TABLE WAS NOT USED. HYDRAULIC STATION, CONTROL CABINET, FEEDERS. THE TABLE HAS 12 VIBRATORS. WORKING AREA OF 7 M X 2.5 M. IF YOU HAVE ANY QUESTIONS FEEL FREE TO CONTACT US. 609130000
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 360 mm<br/>turning diameter over slide rest: 220 mm<br/>turning length: 1000 mm<br/>turning diameter in the gap: 506 mm<br/>turning speeds: 36 45 - 1800- 1600 u/min<br/>centre height: 180 mm<br/>spindle bore: 38 mm<br/>tailstock quill taper mt: 3 <br/>total power requirement: 2,4 kw<br/>weight of the machine ca.: 0,9 t<br/>dimensions of the machine ca.: 1,9 x 0,8 x 1,2 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 360 MM
TURNING DIAMETER OVER SLIDE REST: 220 MM
TURNING LENGTH: 1000 MM
TURNING DIAMETER IN THE GAP: 506 MM
TURNING SPEEDS: 36 45 - 1800- 1600 U/MIN
CENTRE HEIGHT: 180 MM
SPINDLE BORE: 38 MM
TAILSTOCK QUILL TAPER MT: 3
TOTAL POWER REQUIREMENT: 2,4 KW
WEIGHT OF THE MACHINE CA.: 0,9 T
DIMENSIONS OF THE MACHINE CA.: 1,9 X 0,8 X 1,2 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-dudik bucket for concrete 1m3 capacity. track 25m. if you have any questions, please contact me.0048 609130000 DUDIK BUCKET FOR CONCRETE 1M3 CAPACITY. TRACK 25M. IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT ME.0048 609130000
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 410 mm<br/>turning diameter over slide rest: 240 mm<br/>turning length: 1000 mm<br/>turning diameter in the gap: 530 mm<br/>turning speeds: 65 - 1810 u/min<br/>centre height: 205 mm<br/>spindle bore: 52 mm<br/>tailstock quill taper mt: 4 <br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 0,9 t<br/>dimensions of the machine ca.: 1,9 x 0,8 x 1,3 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 410 MM
TURNING DIAMETER OVER SLIDE REST: 240 MM
TURNING LENGTH: 1000 MM
TURNING DIAMETER IN THE GAP: 530 MM
TURNING SPEEDS: 65 - 1810 U/MIN
CENTRE HEIGHT: 205 MM
SPINDLE BORE: 52 MM
TAILSTOCK QUILL TAPER MT: 4
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 0,9 T
DIMENSIONS OF THE MACHINE CA.: 1,9 X 0,8 X 1,3 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 11.000 €
Ubicación: Land-schindler bushhammering machine
year 1996
type st-90
belt wide 90 cm
speed belt and height adjustable
good working condition

dismantled ready for loading SCHINDLER BUSHHAMMERING MACHINE YEAR 1996 TYPE ST-90 BELT WIDE 90 CM SPEED BELT AND HEIGHT ADJUSTABLE GOOD WORKING CONDITION DISMANTLED READY FOR LOADING
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 330 mm<br/>turning diameter over slide rest: 178 mm<br/>turning length: 1000 mm<br/>turning diameter in the gap: 450 mm<br/>turning speeds: 70 - 2000 u/min<br/>centre height: 165 mm<br/>spindle bore: 38 mm<br/>tailstock quill taper mt: 3 <br/>total power requirement: 1,1 kw<br/>weight of the machine ca.: 0,5 t<br/>dimensions of the machine ca.: 1,9 x 0,72 x 1,4 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 330 MM
TURNING DIAMETER OVER SLIDE REST: 178 MM
TURNING LENGTH: 1000 MM
TURNING DIAMETER IN THE GAP: 450 MM
TURNING SPEEDS: 70 - 2000 U/MIN
CENTRE HEIGHT: 165 MM
SPINDLE BORE: 38 MM
TAILSTOCK QUILL TAPER MT: 3
TOTAL POWER REQUIREMENT: 1,1 KW
WEIGHT OF THE MACHINE CA.: 0,5 T
DIMENSIONS OF THE MACHINE CA.: 1,9 X 0,72 X 1,4 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-m?otkownica henke. processing system of paving. very good condition. location germany. 0048 609130000 M?OTKOWNICA HENKE. PROCESSING SYSTEM OF PAVING. VERY GOOD CONDITION. LOCATION GERMANY. 0048 609130000
Vendedor: P.H. ALPHA
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 250 mm<br/>turning diameter over slide rest: 130 mm<br/>turning length: 700 mm<br/>turning speeds: 115 - 1620 u/min<br/>centre height: 125 mm<br/>spindle bore: 27 mm<br/>tailstock quill taper mt: 2 <br/>tailstock quill stroke: 40 mm<br/>metric threading: 0,2 - 3,5 mm<br/>thread - inch: 8 - 56 inch.<br/>thread - module: 0,2 - 12,5 mm<br/>swival range +/-: oberschlitten 45 °<br/>total power requirement: 0,75 kw<br/>weight of the machine ca.: 0,15 t<br/>dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m<br/>equipped with<br/>- 2-axis digital measuring system with position indicator<br/>- manufactured according to din 8606<br/>- 27 mm spindle passage<br/>- adjustable guideways by adjustable strips<br/>- strong engine with 0.75 kw<br/>- high resolution of the axis spindles for exact positioning<br/><br/>delivery:<br/>3-jaw chuck 100 mm, change gear set, splash guard 3-axis<br/>digital measuring system fully assembled.<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 250 MM
TURNING DIAMETER OVER SLIDE REST: 130 MM
TURNING LENGTH: 700 MM
TURNING SPEEDS: 115 - 1620 U/MIN
CENTRE HEIGHT: 125 MM
SPINDLE BORE: 27 MM
TAILSTOCK QUILL TAPER MT: 2
TAILSTOCK QUILL STROKE: 40 MM
METRIC THREADING: 0,2 - 3,5 MM
THREAD - INCH: 8 - 56 INCH.
THREAD - MODULE: 0,2 - 12,5 MM
SWIVAL RANGE +/-: OBERSCHLITTEN 45 °
TOTAL POWER REQUIREMENT: 0,75 KW
WEIGHT OF THE MACHINE CA.: 0,15 T
DIMENSIONS OF THE MACHINE CA.: 1,41 X 0,61 X 0,41 M
EQUIPPED WITH
- 2-AXIS DIGITAL MEASURING SYSTEM WITH POSITION INDICATOR
- MANUFACTURED ACCORDING TO DIN 8606
- 27 MM SPINDLE PASSAGE
- ADJUSTABLE GUIDEWAYS BY ADJUSTABLE STRIPS
- STRONG ENGINE WITH 0.75 KW
- HIGH RESOLUTION OF THE AXIS SPINDLES FOR EXACT POSITIONING

DELIVERY:
3-JAW CHUCK 100 MM, CHANGE GEAR SET, SPLASH GUARD 3-AXIS
DIGITAL MEASURING SYSTEM FULLY ASSEMBLED.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 19.000 
Ubicación: Land-groupe électrogène sdmo insonorisé  de 450 kva 

moteur volvo type : twd 1630 g
année : 2001
heures  seulement  108 
 GROUPE éLECTROGèNE SDMO INSONORISé DE 450 KVA MOTEUR VOLVO TYPE : TWD 1630 G ANNéE : 2001 HEURES SEULEMENT 108
Vendedor: Mondial Energy Services
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 420 mm<br/>turning diameter over slide rest: 250 mm<br/>turning length: 1000 mm<br/>turning diameter in the gap: 580 mm<br/>turning speeds: 45 - 1800 u/min<br/>centre height: 210 mm<br/>spindle bore: 52 mm<br/>tailstock quill taper mt: 4 <br/>total power requirement: 4,4 kw<br/>weight of the machine ca.: 1,6 t<br/>dimensions of the machine ca.: 1,94 x 0,85 x 1,32 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 420 MM
TURNING DIAMETER OVER SLIDE REST: 250 MM
TURNING LENGTH: 1000 MM
TURNING DIAMETER IN THE GAP: 580 MM
TURNING SPEEDS: 45 - 1800 U/MIN
CENTRE HEIGHT: 210 MM
SPINDLE BORE: 52 MM
TAILSTOCK QUILL TAPER MT: 4
TOTAL POWER REQUIREMENT: 4,4 KW
WEIGHT OF THE MACHINE CA.: 1,6 T
DIMENSIONS OF THE MACHINE CA.: 1,94 X 0,85 X 1,32 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 460 mm<br/>turning diameter over slide rest: 290 mm<br/>turning length: 1000 mm<br/>turning diameter in the gap: 700 mm<br/>turning speeds: 25 - 1800 u/min<br/>centre height: 230 mm<br/>spindle bore: 80 mm<br/>tailstock quill taper mt: 5 mk<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 2,35 t<br/>dimensions of the machine ca.: 2,31 x 1,0 x 1,25 m<br/>center lathe with<br/>- 3-jaw chuck f 315<br/>- fixed tailstock top<br/>- multifix holder<br/>- 2-axis digital display<br/>- fixed lynette 180 mm<br/>- coolant system<br/>- rapid traverse<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 460 MM
TURNING DIAMETER OVER SLIDE REST: 290 MM
TURNING LENGTH: 1000 MM
TURNING DIAMETER IN THE GAP: 700 MM
TURNING SPEEDS: 25 - 1800 U/MIN
CENTRE HEIGHT: 230 MM
SPINDLE BORE: 80 MM
TAILSTOCK QUILL TAPER MT: 5 MK
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 2,35 T
DIMENSIONS OF THE MACHINE CA.: 2,31 X 1,0 X 1,25 M
CENTER LATHE WITH
- 3-JAW CHUCK F 315
- FIXED TAILSTOCK TOP
- MULTIFIX HOLDER
- 2-AXIS DIGITAL DISPLAY
- FIXED LYNETTE 180 MM
- COOLANT SYSTEM
- RAPID TRAVERSE




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: container technical data motor: motor manufacturers: mtu engine type: 18 v 2000 g motor no.: 539 100 cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm fuel: fuel oil en 590 technical  data generator: generator manufacturer: rwe piller gmbh generator type: semi-detached 102 80/5 gene. no.: 9503008214/2004 generator power: 1100 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: automatic start functions: emergency operation switch: generator switch 3 pin delivery: fitted tank: execution: internertank, stand tank litres: 950 use: state: get well n built: 2005 delivery: immediately verl operating hours: 416 location: verl - germany stock number: 1094 
 EXECUTION: UNIT TYPE: STATIONARY VERSION: CONTAINER TECHNICAL DATA MOTOR: MOTOR MANUFACTURERS: MTU ENGINE TYPE: 18 V 2000 G MOTOR NO.: 539 100 COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM FUEL: FUEL OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: RWE PILLER GMBH GENERATOR TYPE: SEMI-DETACHED 102 80/5 GENE. NO.: 9503008214/2004 GENERATOR POWER: 1100 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTOMATIC START FUNCTIONS: EMERGENCY OPERATION SWITCH: GENERATOR SWITCH 3 PIN DELIVERY: FITTED TANK: EXECUTION: INTERNERTANK, STAND TANK LITRES: 950 USE: STATE: GET WELL N BUILT: 2005 DELIVERY: IMMEDIATELY VERL OPERATING HOURS: 416 LOCATION: VERL - GERMANY STOCK NUMBER: 1094
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Ubicación: Land-capacity 90 degrees: round: 350 mm<br/>capacity 90 degrees: square: 335 mm<br/>: 380 x 260 <br/>saw band length: 3750 x 34 x 1,1 mm mm<br/>table height: 870 mm<br/>band speed: 20 - 90 m/min<br/>total power requirement: 3 kw<br/>weight of the machine ca.: 1,2 t<br/>dimensions of the machine ca.: 1,95 x 1,95 x 1,5 m<br/><br/><br/><br/><br/> CAPACITY 90 DEGREES: ROUND: 350 MM
CAPACITY 90 DEGREES: SQUARE: 335 MM
: 380 X 260
SAW BAND LENGTH: 3750 X 34 X 1,1 MM MM
TABLE HEIGHT: 870 MM
BAND SPEED: 20 - 90 M/MIN
TOTAL POWER REQUIREMENT: 3 KW
WEIGHT OF THE MACHINE CA.: 1,2 T
DIMENSIONS OF THE MACHINE CA.: 1,95 X 1,95 X 1,5 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-for caterpillar 3516 std 2000 kva year 1990 hours 8000  FOR CATERPILLAR 3516 STD 2000 KVA YEAR 1990 HOURS 8000
Vendedor: Mondial Energy Services
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 30 mm<br/>throat: 260 mm<br/>bore stroke: 135 mm<br/>spindle taper mt: 3 mk<br/>table:: 420 x 350 mm<br/>column diameter: 135 mm<br/>turning speeds: 125 - 3030 u/min<br/>feeds: 0,1 - 0,2 - 0,3 mm/u<br/>total power requirement: 1,1 kw<br/>weight of the machine ca.: 380 kg.<br/>range l-w-h: 0,9 x 0,55 x 2,2 mm<br/>? machine base for clamping high workpieces<br/>? digital depth gauge<br/>? gearbox swivels 180 °<br/>? silent running through geärtete, ground oil-cooled gears<br/>? tapping function<br/>? electromagnetic clutch for drill feed<br/>? automatic feed<br/>? electric drive for table height adjustment<br/><br/><br/><br/><br/> BORE CAPACITY IN STEEL (DIAMETER): 30 MM
THROAT: 260 MM
BORE STROKE: 135 MM
SPINDLE TAPER MT: 3 MK
TABLE:: 420 X 350 MM
COLUMN DIAMETER: 135 MM
TURNING SPEEDS: 125 - 3030 U/MIN
FEEDS: 0,1 - 0,2 - 0,3 MM/U
TOTAL POWER REQUIREMENT: 1,1 KW
WEIGHT OF THE MACHINE CA.: 380 KG.
RANGE L-W-H: 0,9 X 0,55 X 2,2 MM
? MACHINE BASE FOR CLAMPING HIGH WORKPIECES
? DIGITAL DEPTH GAUGE
? GEARBOX SWIVELS 180 °
? SILENT RUNNING THROUGH GEäRTETE, GROUND OIL-COOLED GEARS
? TAPPING FUNCTION
? ELECTROMAGNETIC CLUTCH FOR DRILL FEED
? AUTOMATIC FEED
? ELECTRIC DRIVE FOR TABLE HEIGHT ADJUSTMENT




Vendedor: WMT GmbH & Co. KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KAMI types: