91 ofertas

Año de construcción: usado
Ubicación: Land-overview of aggregate loading:
-release agent spraying unit
-trimming unit
-gluing part a20 with 2 wheels
-trimming unit hl84
-milling unit
-contour trimming unit fk11 manual
-profile scraper pn10
-finish unit

1 base machine:
-feed ⦠18 - 25 m / min
-feed up with fk11 ⦠20 m / min
-working height ⦠950 mm
-pneumatic connection ⦠7-8 bar
-total length ⦠7755 mm

2. workpiece and kantenparmeter:
-workpiece width min:
-at work-piece thickness 12-22 mm ⦠60 mm *.
-for panel thickness 23-40 mm ⦠105 mm *.
* depending on the length of the workpiece
-workpiece overhang ⦠30 mm
-workpiece thickness ⦠12-40 mm
(workpiece thickness optional) ⦠8-60 mm
-edge material role ⦠0.3-3 mm
-edge cross section max: â¦
-for pvc ⦠135 mm â²
-for veneer ⦠100 mmâ²
-roll diameter max. ⦠830 mm
-edge material strip ⦠0.4-20 mm
-edge cross section max: â¦
-in strip ⦠900 mmâ²

3. aggregate loading:

3.1 release agent spraying unit top/bottom:

3.2 trimming unit:
-2 motors 3 kw, 150 hz., 9000 rpm
-electro-pneumatic control of both motors

3.3 a20 gluing unit with 2 roles:
consisting of:
workpiece preheating
quickmelt order unit
quick clamping system
magazine 2 roles manually
pressure zone c.

3.4 caps unit chamfer/straight hl84/0.8 kw:
-2 motors per 0.8 kw, 200 hz., 12000 rpm
-engines manually swiveling the chamfer caps

3.5 preliminary milling unit 1.5 kw:
-2 motors one above the other with x 1,5 kw, 200 hz.
and, 12000 1/min
-height with the upper pressure
-working in the opposite direction
-swivel range +/-1 degree

3.6 form milling aggregate fk 11 manual

i - change head kit manually adjustable
-2 exchange heads
-for manual adjustment on the different
edge thicknesses for chamfer milling or the
manual setup of chamfer milling on
radius milling
-maximum thickness of edges of chamfer radius tool:
-r 1.5 = 0.6 mm
-r 2.0 = 0.8 mm
-if r 3.0 = 1.0 mm
-chamfer angle 15 degrees

3.7 profile scraper pn10:
-to the chamfering or rounding of machined
pvc edge

3.8 finishaggregat, consisting of:
-glue joint scraper
-schwabbelaggregat

4. power control pc 22:

other accessories

carriage
folding for the rectangular insertion of workpieces at unilateral editing.
workpiece dimension 500 x 1600 mm

workpiece thickness 60 mm site. 40 mm
-preparation of the base machine and all
units up to the fã¼geaggregat! 
for workpiece thickness 60 mm
at reduced speed
up to 20 m / min.

workpiece thickness 8 mm
-preparation of the basic machine for
workpiece thickness of min. 8 mm instead of 12 mm
-only longitudinal processing without copying it corners
and possible without profile scraper
only for workpieces without top layer projection.

automation package chamfer/radius
-automatic adjustment infeed fence
-automatic adjustment of compression zone
-pneumatic adjustment of straigt on
straight line caps
-pneumatic adjustment of the cap motors
to flush - or ã?bestandskappen
-pneumatic adjustment before milling unit
to flush - or excess of jurisdiction milling
-automatic adjustment of straigt on
radius milling shape milling
-pneumatic adjustment pn10 and fa11
to the side driving away from the
workspace
-electronic height adjustment

workpiece management for fk device
with additional clamping workpiece length
min. 120 mm 
 OVERVIEW OF AGGREGATE LOADING: -RELEASE AGENT SPRAYING UNIT -TRIMMING UNIT -GLUING PART A20 WITH 2 WHEELS -TRIMMING UNIT HL84 -MILLING UNIT -CONTOUR TRIMMING UNIT FK11 MANUAL -PROFILE SCRAPER PN10 -FINISH UNIT 1 BASE MACHINE: -FEED ¦ 18 - 25 M / MIN -FEED UP WITH FK11 ¦ 20 M / MIN -WORKING HEIGHT ¦ 950 MM -PNEUMATIC CONNECTION ¦ 7-8 BAR -TOTAL LENGTH ¦ 7755 MM 2. WORKPIECE AND KANTENPARMETER: -WORKPIECE WIDTH MIN: -AT WORK-PIECE THICKNESS 12-22 MM ¦ 60 MM *. -FOR PANEL THICKNESS 23-40 MM ¦ 105 MM *. * DEPENDING ON THE LENGTH OF THE WORKPIECE -WORKPIECE OVERHANG ¦ 30 MM -WORKPIECE THICKNESS ¦ 12-40 MM (WORKPIECE THICKNESS OPTIONAL) ¦ 8-60 MM -EDGE MATERIAL ROLE ¦ 0.3-3 MM -EDGE CROSS SECTION MAX: ¦ -FOR PVC ¦ 135 MM ² -FOR VENEER ¦ 100 MM² -ROLL DIAMETER MAX. ¦ 830 MM -EDGE MATERIAL STRIP ¦ 0.4-20 MM -EDGE CROSS SECTION MAX: ¦ -IN STRIP ¦ 900 MM² 3. AGGREGATE LOADING: 3.1 RELEASE AGENT SPRAYING UNIT TOP/BOTTOM: 3.2 TRIMMING UNIT: -2 MOTORS 3 KW, 150 HZ., 9000 RPM -ELECTRO-PNEUMATIC CONTROL OF BOTH MOTORS 3.3 A20 GLUING UNIT WITH 2 ROLES: CONSISTING OF: WORKPIECE PREHEATING QUICKMELT ORDER UNIT QUICK CLAMPING SYSTEM MAGAZINE 2 ROLES MANUALLY PRESSURE ZONE C. 3.4 CAPS UNIT CHAMFER/STRAIGHT HL84/0.8 KW: -2 MOTORS PER 0.8 KW, 200 HZ., 12000 RPM -ENGINES MANUALLY SWIVELING THE CHAMFER CAPS 3.5 PRELIMINARY MILLING UNIT 1.5 KW: -2 MOTORS ONE ABOVE THE OTHER WITH X 1,5 KW, 200 HZ. AND, 12000 1/MIN -HEIGHT WITH THE UPPER PRESSURE -WORKING IN THE OPPOSITE DIRECTION -SWIVEL RANGE +/-1 DEGREE 3.6 FORM MILLING AGGREGATE FK 11 MANUAL I - CHANGE HEAD KIT MANUALLY ADJUSTABLE -2 EXCHANGE HEADS -FOR MANUAL ADJUSTMENT ON THE DIFFERENT EDGE THICKNESSES FOR CHAMFER MILLING OR THE MANUAL SETUP OF CHAMFER MILLING ON RADIUS MILLING -MAXIMUM THICKNESS OF EDGES OF CHAMFER RADIUS TOOL: -R 1.5 = 0.6 MM -R 2.0 = 0.8 MM -IF R 3.0 = 1.0 MM -CHAMFER ANGLE 15 DEGREES 3.7 PROFILE SCRAPER PN10: -TO THE CHAMFERING OR ROUNDING OF MACHINED PVC EDGE 3.8 FINISHAGGREGAT, CONSISTING OF: -GLUE JOINT SCRAPER -SCHWABBELAGGREGAT 4. POWER CONTROL PC 22: OTHER ACCESSORIES CARRIAGE FOLDING FOR THE RECTANGULAR INSERTION OF WORKPIECES AT UNILATERAL EDITING. WORKPIECE DIMENSION 500 X 1600 MM WORKPIECE THICKNESS 60 MM SITE. 40 MM -PREPARATION OF THE BASE MACHINE AND ALL UNITS UP TO THE FüGEAGGREGAT! FOR WORKPIECE THICKNESS 60 MM AT REDUCED SPEED UP TO 20 M / MIN. WORKPIECE THICKNESS 8 MM -PREPARATION OF THE BASIC MACHINE FOR WORKPIECE THICKNESS OF MIN. 8 MM INSTEAD OF 12 MM -ONLY LONGITUDINAL PROCESSING WITHOUT COPYING IT CORNERS AND POSSIBLE WITHOUT PROFILE SCRAPER ONLY FOR WORKPIECES WITHOUT TOP LAYER PROJECTION. AUTOMATION PACKAGE CHAMFER/RADIUS -AUTOMATIC ADJUSTMENT INFEED FENCE -AUTOMATIC ADJUSTMENT OF COMPRESSION ZONE -PNEUMATIC ADJUSTMENT OF STRAIGT ON STRAIGHT LINE CAPS -PNEUMATIC ADJUSTMENT OF THE CAP MOTORS TO FLUSH - OR �BESTANDSKAPPEN -PNEUMATIC ADJUSTMENT BEFORE MILLING UNIT TO FLUSH - OR EXCESS OF JURISDICTION MILLING -AUTOMATIC ADJUSTMENT OF STRAIGT ON RADIUS MILLING SHAPE MILLING -PNEUMATIC ADJUSTMENT PN10 AND FA11 TO THE SIDE DRIVING AWAY FROM THE WORKSPACE -ELECTRONIC HEIGHT ADJUSTMENT WORKPIECE MANAGEMENT FOR FK DEVICE WITH ADDITIONAL CLAMPING WORKPIECE LENGTH MIN. 120 MM
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-capacity: 30000  bottles/h      <br />formats:  longneck-, steini-, vichy- 0,33 l bottles / 0,5 longneck-, nrw- 0,5 l bottles<br />operation / control:  siemens s7<br />equipment: short tobe filler with pre evacuation, 88 filling valves, 20 crown stamps<br /> CAPACITY: 30000 BOTTLES/H
FORMATS: LONGNECK-, STEINI-, VICHY- 0,33 L BOTTLES / 0,5 LONGNECK-, NRW- 0,5 L BOTTLES
OPERATION / CONTROL: SIEMENS S7
EQUIPMENT: SHORT TOBE FILLER WITH PRE EVACUATION, 88 FILLING VALVES, 20 CROWN STAMPS
Vendedor: VBW Asset Trade Weihenstephan GmbH
Año de construcción: usado
Ubicación: Land-motor power 4 kw
aggregate swivel (not tiltable)
machine table 4,200 x 450 mm,
with roles in the table. MOTOR POWER 4 KW AGGREGATE SWIVEL (NOT TILTABLE) MACHINE TABLE 4,200 X 450 MM, WITH ROLES IN THE TABLE.
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 3400 x 2100 x 1850 mm<br/>description: 5.5 kw, scorer 45° swivelling, table length 3200 mm, electrically adjustable rip fence, electronic control panel, digital side fence WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 3400 X 2100 X 1850 MM
DESCRIPTION: 5.5 KW, SCORER 45° SWIVELLING, TABLE LENGTH 3200 MM, ELECTRICALLY ADJUSTABLE RIP FENCE, ELECTRONIC CONTROL PANEL, DIGITAL SIDE FENCE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-output: 36,000 bottles/h, container dimensions: 204.5-332x56.5-84.5mm, controls: siemens s5, length: 4000mm, width: 3700mm, height: 2350mm, weight: 13t.   OUTPUT: 36,000 BOTTLES/H, CONTAINER DIMENSIONS: 204.5-332X56.5-84.5MM, CONTROLS: SIEMENS S5, LENGTH: 4000MM, WIDTH: 3700MM, HEIGHT: 2350MM, WEIGHT: 13T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 300 mm<br/>gear width: 700 mm<br/>max. module: 10 <br/>min. module: 1 <br/>control: simatic s5-130 k <br/>total power requirement: 15 kw<br/>weight of the machine ca.: 6,5 t<br/>dimensions of the machine ca.: 4,0 x 3,5 x 2,0 m<br/>profile grinding machine!<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 300 MM
GEAR WIDTH: 700 MM
MAX. MODULE: 10
MIN. MODULE: 1
CONTROL: SIMATIC S5-130 K
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 6,5 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 3,5 X 2,0 M
PROFILE GRINDING MACHINE!




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition

technical parameters:

-motor 4 kw
-blade diameter 350 mm
-spindle diameter 30 mm
-diameter 100 mm
-possibility of cutting 4 items at once
-the dimension of the brick max 120 mm x 120 mm
-height adjustable pad
-height brick 80 mm-140 mm

overall dimensions of the machine:
-length: 130 cm
-width 80 cm
-height 140 cm
-weight ~ 400 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION TECHNICAL PARAMETERS: -MOTOR 4 KW -BLADE DIAMETER 350 MM -SPINDLE DIAMETER 30 MM -DIAMETER 100 MM -POSSIBILITY OF CUTTING 4 ITEMS AT ONCE -THE DIMENSION OF THE BRICK MAX 120 MM X 120 MM -HEIGHT ADJUSTABLE PAD -HEIGHT BRICK 80 MM-140 MM OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 130 CM -WIDTH 80 CM -HEIGHT 140 CM -WEIGHT ~ 400 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-bündigfräsmaschine mit kappeinrichtung\r\nhersteller: brandt\r\ntyp: f10 ek11\r\nbaujahr: 1990\r\n\r\ntechnische daten:\r\nzum gleichzeitigen oberen und unteren bündigfräsen von überstehenden kantenmaterialien an\r\ngeraden kanten sowie geschweiften werkstücken mit innen- und außenradien\r\n\r\nbestückung mit anschlagschienen für gerade kanten und zentrischen auflaufringen für formteile\r\n\r\nwerkstückdicke: ca. 12 ? 60 mm\r\nwerkstückbreite: min. ca. 30 mm\r\ninnenradius: min. ca. 45 mm\r\nkantendicke: max. ca. 1 mm\r\nfräsmotoren: 2 x 0,26 kw\r\nelektrik: 380 v, 3 ph., 50hz\r\npneumatikanschluss: 4 bar\r\narbeitshöhe: 850 mm\r\n\r\nkappeinrichtung zum exakten kappen von kantenmaterialüberständen an werkstücken mit geraden\r\nund geschweiften kanten an f10 angebaut\r\n\r\nwerkstückdicke: ca. 10 ? 60 mm\r\nkantenmaterialdicke: max. 1 mm\r\nkappwerkzeug durchm.: 100 x 32 x3 mm, z = 20\r\nantrieb: 1 x ac-motor, über zahnriehmen auf werkzeugwelle\r\nleistung: 0,37 kw\r\ndrehzahl: 3000 upm\r\nelektrik: 380 v, 50 hz, 3 ph.\r\ngewicht: 150 kg\r\n\r\n BüNDIGFRäSMASCHINE MIT KAPPEINRICHTUNG\R\NHERSTELLER: BRANDT\R\NTYP: F10 EK11\R\NBAUJAHR: 1990\R\N\R\NTECHNISCHE DATEN:\R\NZUM GLEICHZEITIGEN OBEREN UND UNTEREN BüNDIGFRäSEN VON üBERSTEHENDEN KANTENMATERIALIEN AN\R\NGERADEN KANTEN SOWIE GESCHWEIFTEN WERKSTüCKEN MIT INNEN- UND AUßENRADIEN\R\N\R\NBESTüCKUNG MIT ANSCHLAGSCHIENEN FüR GERADE KANTEN UND ZENTRISCHEN AUFLAUFRINGEN FüR FORMTEILE\R\N\R\NWERKSTüCKDICKE: CA. 12 ? 60 MM\R\NWERKSTüCKBREITE: MIN. CA. 30 MM\R\NINNENRADIUS: MIN. CA. 45 MM\R\NKANTENDICKE: MAX. CA. 1 MM\R\NFRäSMOTOREN: 2 X 0,26 KW\R\NELEKTRIK: 380 V, 3 PH., 50HZ\R\NPNEUMATIKANSCHLUSS: 4 BAR\R\NARBEITSHöHE: 850 MM\R\N\R\NKAPPEINRICHTUNG ZUM EXAKTEN KAPPEN VON KANTENMATERIALüBERSTäNDEN AN WERKSTüCKEN MIT GERADEN\R\NUND GESCHWEIFTEN KANTEN AN F10 ANGEBAUT\R\N\R\NWERKSTüCKDICKE: CA. 10 ? 60 MM\R\NKANTENMATERIALDICKE: MAX. 1 MM\R\NKAPPWERKZEUG DURCHM.: 100 X 32 X3 MM, Z = 20\R\NANTRIEB: 1 X AC-MOTOR, üBER ZAHNRIEHMEN AUF WERKZEUGWELLE\R\NLEISTUNG: 0,37 KW\R\NDREHZAHL: 3000 UPM\R\NELEKTRIK: 380 V, 50 HZ, 3 PH.\R\NGEWICHT: 150 KG\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-rotary saw to pallet pads
-machine in stock
-after reviewing the technical
-very good condition
-year of manufacture 2010

technical parameters:
-main engine 5.2 kw
-blade diameter 400 mm

the parameters of the cut blocks:
-width: 65-80 mm
-length: 10-150 mm
-cutting height 80-140 mm
-9 magazines on raw material

-system working carousel
-speed control on the inverter

overall dimensions of the machine:
– length 170 cm
-width: 135 cm
-height 205 cm
-weight 450 kg
  ROTARY SAW TO PALLET PADS -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE 2010 TECHNICAL PARAMETERS: -MAIN ENGINE 5.2 KW -BLADE DIAMETER 400 MM THE PARAMETERS OF THE CUT BLOCKS: -WIDTH: 65-80 MM -LENGTH: 10-150 MM -CUTTING HEIGHT 80-140 MM -9 MAGAZINES ON RAW MATERIAL -SYSTEM WORKING CAROUSEL -SPEED CONTROL ON THE INVERTER OVERALL DIMENSIONS OF THE MACHINE: – LENGTH 170 CM -WIDTH: 135 CM -HEIGHT 205 CM -WEIGHT 450 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: 450 €
Ubicación: Land-untertischkappsäge\r\nfabrikat: kaltenbach\r\ntyp: tl 250 s\r\n\r\nsägeblatt: Ø 250 x 3,0 x 30, z=60\r\nschnitthöhe: ca. 60 mm\r\nwinkelverstellung: manuell\r\nhöhenverstellung: manuell\r\nschwenkbar: 0 - 45°\r\nauflagetisch: ca. 1320 x 130 mm\r\n\r\nmotor: 1 kw, 50 hz, 220 v\r\nip 54\r\n\r\nhinweis:\r\ndie technischen daten und beschreibungen sind abschrift der damaligen auftragsbestätigung. daten dienen zur information und sind nicht verbindlich.\r\n UNTERTISCHKAPPSäGE\R\NFABRIKAT: KALTENBACH\R\NTYP: TL 250 S\R\N\R\NSäGEBLATT: Ø 250 X 3,0 X 30, Z=60\R\NSCHNITTHöHE: CA. 60 MM\R\NWINKELVERSTELLUNG: MANUELL\R\NHöHENVERSTELLUNG: MANUELL\R\NSCHWENKBAR: 0 - 45°\R\NAUFLAGETISCH: CA. 1320 X 130 MM\R\N\R\NMOTOR: 1 KW, 50 HZ, 220 V\R\NIP 54\R\N\R\NHINWEIS:\R\NDIE TECHNISCHEN DATEN UND BESCHREIBUNGEN SIND ABSCHRIFT DER DAMALIGEN AUFTRAGSBESTäTIGUNG. DATEN DIENEN ZUR INFORMATION UND SIND NICHT VERBINDLICH.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-electronic cut-off saw bottene model r550 at movable stroke, composed by:
- motorized rollers conveyor for loading, length 4 mt, useful width about 350mm
- machine body with:
* blade d=550mm, cutting actioning with double push-button actioned from the worker
* electronic programming, computer installed new from bottene manufacturer on september 2018
- motorized rollers conveyor for unloading, length about 7 mt, useful width about 350mm, with:
* movable stroke at electronic managing
* 15 side unloader with motorized chains + idle wheels supports
* possibility to select 3 unloading zone, from working cycle programming
overall dimensions when installed about mt 12 x 2
machine body heigth h=2,3 mt about
heigth of working plane from floor h=1230 mm
machine at ce norms. ELECTRONIC CUT-OFF SAW BOTTENE MODEL R550 AT MOVABLE STROKE, COMPOSED BY: - MOTORIZED ROLLERS CONVEYOR FOR LOADING, LENGTH 4 MT, USEFUL WIDTH ABOUT 350MM - MACHINE BODY WITH: * BLADE D=550MM, CUTTING ACTIONING WITH DOUBLE PUSH-BUTTON ACTIONED FROM THE WORKER * ELECTRONIC PROGRAMMING, COMPUTER INSTALLED NEW FROM BOTTENE MANUFACTURER ON SEPTEMBER 2018 - MOTORIZED ROLLERS CONVEYOR FOR UNLOADING, LENGTH ABOUT 7 MT, USEFUL WIDTH ABOUT 350MM, WITH: * MOVABLE STROKE AT ELECTRONIC MANAGING * 15 SIDE UNLOADER WITH MOTORIZED CHAINS + IDLE WHEELS SUPPORTS * POSSIBILITY TO SELECT 3 UNLOADING ZONE, FROM WORKING CYCLE PROGRAMMING OVERALL DIMENSIONS WHEN INSTALLED ABOUT MT 12 X 2 MACHINE BODY HEIGTH H=2,3 MT ABOUT HEIGTH OF WORKING PLANE FROM FLOOR H=1230 MM MACHINE AT CE NORMS.
Vendedor: Baldin SRL
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-ecken-kappsäge\r\nfabrikat: schleicher \r\ntyp: mod 07\r\n\r\nvon fa. panhans generalüberholt\r\n2 sägeaggregate, winkel einstellbar ECKEN-KAPPSäGE\R\NFABRIKAT: SCHLEICHER \R\NTYP: MOD 07\R\N\R\NVON FA. PANHANS GENERALüBERHOLT\R\N2 SäGEAGGREGATE, WINKEL EINSTELLBAR
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-one page edge banding machine, right version
to glue height max. 60 mm thickness 0.4-20 mm cap scissors up to thickness 3 mm glue system roller above the glue pot 8 l aggregates: gluing, pneumatic cap scissors, doppelkappsaege, before milling, precision milling, schleifagregat
magazine plate for role and bar legal machine sliding chain top pressure with compound v-belt 70 mm wide upper pressure setting manually with siko meter 4-roller pressure zone trimming unit with 2 motors levelling milling unit with 2 motors of up and down groping shankar raesaggregat with 2 motors from the top and sides groping schleifmagregat oscillation
feed gear adjustable roller rail frequency converter 165 volt, 300 hz hf motors 165 volt, 18000 rpm length approx. 5230 mm depth approx. 1100 mm weight 2900 kg

ONE PAGE EDGE BANDING MACHINE, RIGHT VERSION TO GLUE HEIGHT MAX. 60 MM THICKNESS 0.4-20 MM CAP SCISSORS UP TO THICKNESS 3 MM GLUE SYSTEM ROLLER ABOVE THE GLUE POT 8 L AGGREGATES: GLUING, PNEUMATIC CAP SCISSORS, DOPPELKAPPSAEGE, BEFORE MILLING, PRECISION MILLING, SCHLEIFAGREGAT MAGAZINE PLATE FOR ROLE AND BAR LEGAL MACHINE SLIDING CHAIN TOP PRESSURE WITH COMPOUND V-BELT 70 MM WIDE UPPER PRESSURE SETTING MANUALLY WITH SIKO METER 4-ROLLER PRESSURE ZONE TRIMMING UNIT WITH 2 MOTORS LEVELLING MILLING UNIT WITH 2 MOTORS OF UP AND DOWN GROPING SHANKAR RAESAGGREGAT WITH 2 MOTORS FROM THE TOP AND SIDES GROPING SCHLEIFMAGREGAT OSCILLATION FEED GEAR ADJUSTABLE ROLLER RAIL FREQUENCY CONVERTER 165 VOLT, 300 HZ HF MOTORS 165 VOLT, 18000 RPM LENGTH APPROX. 5230 MM DEPTH APPROX. 1100 MM WEIGHT 2900 KG
Vendedor: Dematech s.r.o
Año de construcción: usado
Precio: 1.650 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.980 €
Ubicación: Land-metal cutting saw kaltenbach rk 630

with hydr. feed
for steels up to 80 kg / mm2
l x w x h: 80 x 80 x 210 cm
weight approx. 1000 kg
built in 1978

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12        METAL CUTTING SAW KALTENBACH RK 630 WITH HYDR. FEED FOR STEELS UP TO 80 KG / MM2 L X W X H: 80 X 80 X 210 CM WEIGHT APPROX. 1000 KG BUILT IN 1978 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-kapselaufsetzer pvc kappen 2000 flaschen <br/>id5422 KAPSELAUFSETZER PVC KAPPEN 2000 FLASCHEN
ID5422
Vendedor: Seegräber GmbH
Año de construcción: usado
Precio: 1.070 €
Ubicación: Land-schneidlstg. about 90 â°: 80 mm
schneidlstg. approximately 45 â°: left = 65 mm / right = 58 mm
schneidlstg. vkt. 90 â°: 65 mm
schneidlstg. vkt. 45 â°: left = 55 mm / right = 45 mm
schneidlstg. flat 90 â°: 80 x 55 mm
schneidlstg. flat 45 â°: left = 60 x 55 mm / right = 55 x 45 mm
sã¤geblattdurchm.: 250 mm
total power: 1.1 kw / 400 v
machine weight: approx. 100 kg

equipment / accessories:

1 standard saw blade 250 mm
coolant system
solid base
centrically exciting vise
ergonomically shaped handles for saws without effort
switch in the handle
angle scale for precise work
bevel from - 45 â° to + 45 â°
eccentric clamp for quick conversion to miter
factory warranty

all technical data has been to the best of our knowledge and vorhandenre documents; expressly reserved by mistake.
each bidder has the option to test the machine in advance under current.
 SCHNEIDLSTG. ABOUT 90 &ACIRC;&DEG;: 80 MM SCHNEIDLSTG. APPROXIMATELY 45 &ACIRC;&DEG;: LEFT = 65 MM / RIGHT = 58 MM SCHNEIDLSTG. VKT. 90 &ACIRC;&DEG;: 65 MM SCHNEIDLSTG. VKT. 45 &ACIRC;&DEG;: LEFT = 55 MM / RIGHT = 45 MM SCHNEIDLSTG. FLAT 90 &ACIRC;&DEG;: 80 X 55 MM SCHNEIDLSTG. FLAT 45 &ACIRC;&DEG;: LEFT = 60 X 55 MM / RIGHT = 55 X 45 MM S&ATILDE;&CURREN;GEBLATTDURCHM.: 250 MM TOTAL POWER: 1.1 KW / 400 V MACHINE WEIGHT: APPROX. 100 KG EQUIPMENT / ACCESSORIES: 1 STANDARD SAW BLADE 250 MM COOLANT SYSTEM SOLID BASE CENTRICALLY EXCITING VISE ERGONOMICALLY SHAPED HANDLES FOR SAWS WITHOUT EFFORT SWITCH IN THE HANDLE ANGLE SCALE FOR PRECISE WORK BEVEL FROM - 45 &ACIRC;&DEG; TO + 45 &ACIRC;&DEG; ECCENTRIC CLAMP FOR QUICK CONVERSION TO MITER FACTORY WARRANTY ALL TECHNICAL DATA HAS BEEN TO THE BEST OF OUR KNOWLEDGE AND VORHANDENRE DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH BIDDER HAS THE OPTION TO TEST THE MACHINE IN ADVANCE UNDER CURRENT.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-kapselaufsetzer pvc kappen 2000 flaschen <br/>id5450 KAPSELAUFSETZER PVC KAPPEN 2000 FLASCHEN
ID5450
Vendedor: Seegräber GmbH
Año de construcción: usado
Ubicación: Land-wã¤lzfrã¤serschleifmachine-kapp as 203
 germany built. 1968 no. 3.485 / 263-08-04 series
 tool grinding machine centre distance: approx. 350 mm
 tip height: approx. 85-120 mm
 grinding wheel diameter up to 200 mm
 the spindle speed: 3000-6000 rpm
 schleifspindelkpopf swiveling
 arbeitsablauf-hydraulik-manual + automatic
 the machine is in very good used condition with very good accessories and grinding dust extraction W&ATILDE;&CURREN;LZFR&ATILDE;&CURREN;SERSCHLEIFMACHINE-KAPP AS 203 GERMANY BUILT. 1968 NO. 3.485 / 263-08-04 SERIES TOOL GRINDING MACHINE CENTRE DISTANCE: APPROX. 350 MM TIP HEIGHT: APPROX. 85-120 MM GRINDING WHEEL DIAMETER UP TO 200 MM THE SPINDLE SPEED: 3000-6000 RPM SCHLEIFSPINDELKPOPF SWIVELING ARBEITSABLAUF-HYDRAULIK-MANUAL + AUTOMATIC THE MACHINE IS IN VERY GOOD USED CONDITION WITH VERY GOOD ACCESSORIES AND GRINDING DUST EXTRACTION
Vendedor: Maschinen Stumpf GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: metabo, type: kappsäge ks216 m lasercut, diamete saw blade max mm: 216, engine main saw kw: 1,35, MANUFACTURER: METABO, TYPE: KAPPSäGE KS216 M LASERCUT, DIAMETE SAW BLADE MAX MM: 216, ENGINE MAIN SAW KW: 1,35,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-winter under table saw cutmax 600 (as new!)
-cutting height 200 x 200 mm
-table size 1150 x 660 mm
-saw blades 㸠600 mm
-engine 10 kw / 400 v
-speed 2400 rpm
-cutting speed is 40 cycles/min.
-compressed air connection 8 bar
-suction nozzle 㸠120 mm
-safety two hand control
-ce conformity
-includes 1.5 m roll train left and right
-dimensions l = 1360,b = 900, h = 1450 mm
-weight 560 kg
year of build 2016
 WINTER UNDER TABLE SAW CUTMAX 600 (AS NEW!) -CUTTING HEIGHT 200 X 200 MM -TABLE SIZE 1150 X 660 MM -SAW BLADES &ATILDE;&CEDIL; 600 MM -ENGINE 10 KW / 400 V -SPEED 2400 RPM -CUTTING SPEED IS 40 CYCLES/MIN. -COMPRESSED AIR CONNECTION 8 BAR -SUCTION NOZZLE &ATILDE;&CEDIL; 120 MM -SAFETY TWO HAND CONTROL -CE CONFORMITY -INCLUDES 1.5 M ROLL TRAIN LEFT AND RIGHT -DIMENSIONS L = 1360,B = 900, H = 1450 MM -WEIGHT 560 KG YEAR OF BUILD 2016
Vendedor: Maschinendrehpunkt
Año de construcción: usado
Ubicación: Land-manufacturer: kappsäge, year: ca.1995, cutting depth mm: 130, slewing range degrees: 45-90-45, kw output saw motor: 4,7 ampere, saw blade diameter mm: 220, free text: inkl.tisch, year :ca.1995 MANUFACTURER: KAPPSäGE, YEAR: CA.1995, CUTTING DEPTH MM: 130, SLEWING RANGE DEGREES: 45-90-45, KW OUTPUT SAW MOTOR: 4,7 AMPERE, SAW BLADE DIAMETER MM: 220, FREE TEXT: INKL.TISCH, YEAR :CA.1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-with round belt conveyor soco system, speed: 10-20m/min, conveyor width: 400-600mm.  WITH ROUND BELT CONVEYOR SOCO SYSTEM, SPEED: 10-20M/MIN, CONVEYOR WIDTH: 400-600MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: homag, type: kfr 21 und kfl 21 inkl.winkelübergabe, year: 1999, control: 2 x nc 21, program: homatic, system comprising of: 2 kantenmaschine mit winklelübergabe, kantenmaschine mit doppelenprofiler teil: 2 zerspaner + fügen, getrennte kette: yes, laserverleimteil: no, kantenstärke min-max mm: 0,5-3, work piece width min-max mm: 45, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-45, strips min/max mm: no, machine no 1: kfr 21, ma 1 arbeitsbreite min-max: 250-2800 mm, ma 1 kantenmaterialstärke min-max mm: 0,5-3,0, ma 1 fügefräsen: yes, ma 1 schutzfräsen: yes, ma 1 feinfräsen: yes, ma 1 nuten: yes, ma 1 verleimteil gerade: yes, ma 1 vorfräsen: yes, ma 1 radiusfräsen 1: yes, ma 1 radiusziehklinge: yes, ma 1 flachziehklinge: yes, ma 1 schwabbeln: yes, ma 1 nuten: yes, angular transfer: yes, machine 2: kfl, ma 2 kantenstärke 0,5-3 mm: yes, ma 2 verleimteil gerade: yes, ma 2 kappen: yes, ma 2 andruckzone : yes, ma 2 radiusfräsen 1: yes, ma 2 eckenkopierfräsen: fk 13, ma 2 radiusziehklinge: yes, ma 2 flachziehklinge: yes, ma 2 schwabbeln: yes, verkettung: yes, free text: kantenmagazine  2 12-fach/ motrische/vorschmelzer, year :1999 MANUFACTURER: HOMAG, TYPE: KFR 21 UND KFL 21 INKL.WINKELüBERGABE, YEAR: 1999, CONTROL: 2 X NC 21, PROGRAM: HOMATIC, SYSTEM COMPRISING OF: 2 KANTENMASCHINE MIT WINKLELüBERGABE, KANTENMASCHINE MIT DOPPELENPROFILER TEIL: 2 ZERSPANER + FüGEN, GETRENNTE KETTE: YES, LASERVERLEIMTEIL: NO, KANTENSTäRKE MIN-MAX MM: 0,5-3, WORK PIECE WIDTH MIN-MAX MM: 45, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-45, STRIPS MIN/MAX MM: NO, MACHINE NO 1: KFR 21, MA 1 ARBEITSBREITE MIN-MAX: 250-2800 MM, MA 1 KANTENMATERIALSTäRKE MIN-MAX MM: 0,5-3,0, MA 1 FüGEFRäSEN: YES, MA 1 SCHUTZFRäSEN: YES, MA 1 FEINFRäSEN: YES, MA 1 NUTEN: YES, MA 1 VERLEIMTEIL GERADE: YES, MA 1 VORFRäSEN: YES, MA 1 RADIUSFRäSEN 1: YES, MA 1 RADIUSZIEHKLINGE: YES, MA 1 FLACHZIEHKLINGE: YES, MA 1 SCHWABBELN: YES, MA 1 NUTEN: YES, ANGULAR TRANSFER: YES, MACHINE 2: KFL, MA 2 KANTENSTäRKE 0,5-3 MM: YES, MA 2 VERLEIMTEIL GERADE: YES, MA 2 KAPPEN: YES, MA 2 ANDRUCKZONE : YES, MA 2 RADIUSFRäSEN 1: YES, MA 2 ECKENKOPIERFRäSEN: FK 13, MA 2 RADIUSZIEHKLINGE: YES, MA 2 FLACHZIEHKLINGE: YES, MA 2 SCHWABBELN: YES, VERKETTUNG: YES, FREE TEXT: KANTENMAGAZINE 2 12-FACH/ MOTRISCHE/VORSCHMELZER, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-production 25.000 cups/h
format 125gr 
product: yogurt PRODUCTION 25.000 CUPS/H FORMAT 125GR PRODUCT: YOGURT
Vendedor: MachinePoint
Año de construcción: usado
Ubicación: Land-type: kf 64/14/qe/35/ii+500, control: nc 21, program: yes, year: 2002, min-max edge material mm: 0,4-3,0, work piece width min-max mm: 275, min.-max. workpiece length in mm: 450-3500, min.-max. workpiece height in mm: 12-40, werkstücküberstand mm: 42 mm, min-max feed m/min: 10-40, soft forming: tonnenprofil/r 14, zerspanereinheit : yes, fräsen tastend oben und unten stück: yes, ritzen zerspanen: yes, profifräsen stück: 1, fräsen tastend von oben stück: yes, schmelzklebersoftformingaggregat hl 34: yes, schmelzklebersoftformingaggregat: yes, rollenmagazin : 2, mehrfachdruckzone  6-fach: yes, kappaggregat hl 05: yes, bündifräsen: yes, radiusfräsen oben unten: yes, nutfrässaggregat gesteuert: yes, achsenverstellung : x/z, radiusfräsen 2 oben unten: yes, corner tracing type: ff 12, 4 motors: yes, arbeitshöhe bis mm kettenoberkante mm: 890, pneumatikanschluß bar: 6, einelegehilfe: verlängerte kette, fase/radiusschleifaggregat : 2, profilschleifaggregat 2: 1, pressure zone exchange system: yes, strip magazin: no, glue system granulate/cartridge: granulat, top pressure belt/roller: band, centre support: ja, noise enclosure: yes, year :2002 TYPE: KF 64/14/QE/35/II+500, CONTROL: NC 21, PROGRAM: YES, YEAR: 2002, MIN-MAX EDGE MATERIAL MM: 0,4-3,0, WORK PIECE WIDTH MIN-MAX MM: 275, MIN.-MAX. WORKPIECE LENGTH IN MM: 450-3500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 12-40, WERKST&UUML;CK&UUML;BERSTAND MM: 42 MM, MIN-MAX FEED M/MIN: 10-40, SOFT FORMING: TONNENPROFIL/R 14, ZERSPANEREINHEIT : YES, FR&AUML;SEN TASTEND OBEN UND UNTEN ST&UUML;CK: YES, RITZEN ZERSPANEN: YES, PROFIFR&AUML;SEN ST&UUML;CK: 1, FR&AUML;SEN TASTEND VON OBEN ST&UUML;CK: YES, SCHMELZKLEBERSOFTFORMINGAGGREGAT HL 34: YES, SCHMELZKLEBERSOFTFORMINGAGGREGAT: YES, ROLLENMAGAZIN : 2, MEHRFACHDRUCKZONE 6-FACH: YES, KAPPAGGREGAT HL 05: YES, B&UUML;NDIFR&AUML;SEN: YES, RADIUSFR&AUML;SEN OBEN UNTEN: YES, NUTFR&AUML;SSAGGREGAT GESTEUERT: YES, ACHSENVERSTELLUNG : X/Z, RADIUSFR&AUML;SEN 2 OBEN UNTEN: YES, CORNER TRACING TYPE: FF 12, 4 MOTORS: YES, ARBEITSH&OUML;HE BIS MM KETTENOBERKANTE MM: 890, PNEUMATIKANSCHLU&SZLIG; BAR: 6, EINELEGEHILFE: VERL&AUML;NGERTE KETTE, FASE/RADIUSSCHLEIFAGGREGAT : 2, PROFILSCHLEIFAGGREGAT 2: 1, PRESSURE ZONE EXCHANGE SYSTEM: YES, STRIP MAGAZIN: NO, GLUE SYSTEM GRANULATE/CARTRIDGE: GRANULAT, TOP PRESSURE BELT/ROLLER: BAND, CENTRE SUPPORT: JA, NOISE ENCLOSURE: YES, YEAR :2002
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-complete rod milling machine for palisades vun 80-240 mm in diameter and up to 4 m in length, consisting of:-round wooden feeder levels separating feeding chain conveyor oswald round rod tiller rm 243 excerpt conveyor intermediate bachelor of palisadenfas - and kappagregat - electric control / control panel hydraulikaggregatbei needs can be supplied for an additional charge amounting to â?¬19,000 net: 1 stack machine for palisades from 80 to 240 mm diameter and 500 to 4,000 mm length of oswald engineering, comprising:-feeding conveyor stacking unit-bind station pull-out roller crosswise conveyor hydraulic unit control panel  COMPLETE ROD MILLING MACHINE FOR PALISADES VUN 80-240 MM IN DIAMETER AND UP TO 4 M IN LENGTH, CONSISTING OF:-ROUND WOODEN FEEDER LEVELS SEPARATING FEEDING CHAIN CONVEYOR OSWALD ROUND ROD TILLER RM 243 EXCERPT CONVEYOR INTERMEDIATE BACHELOR OF PALISADENFAS - AND KAPPAGREGAT - ELECTRIC CONTROL / CONTROL PANEL HYDRAULIKAGGREGATBEI NEEDS CAN BE SUPPLIED FOR AN ADDITIONAL CHARGE AMOUNTING TO &ACIRC;?&NOT;19,000 NET: 1 STACK MACHINE FOR PALISADES FROM 80 TO 240 MM DIAMETER AND 500 TO 4,000 MM LENGTH OF OSWALD ENGINEERING, COMPRISING:-FEEDING CONVEYOR STACKING UNIT-BIND STATION PULL-OUT ROLLER CROSSWISE CONVEYOR HYDRAULIC UNIT CONTROL PANEL
Vendedor: HV R. Heynlein
Año de construcción: usado
Ubicación: Land-manufacturer: homag, type: baz 20/50/16/1/ka, year: 1999, control: nc 83, software: woodwoop, barcode: yes, work piece width min-max mm: 1600, min.-max. workpiece length in mm: 5600 oder 2 x 2128, min.-max. workpiece height in mm: 10-60, working range x: 5600, working range y-axis: 1600, working range z: 250, c axis: yes, pendulum processing: yes, work piece width min-max mm: 1600, min.-max. workpiece length in mm: 5600 oder 2 x 2128, min.-max. workpiece height in mm: 10-60, number of milling spindles vertical: 1, tool adaption system: hsk 63, milling engine 1 hours power: 12, rpm 1): 1500-18000, kettenwechsler: yes, number of tools per tool-magazine: 70, mitfahrender werkzeugwechsler: yes, vertical drills-x: 10, drill vertical y: 7, 4 station allocation: yes, stops in the table front: yes, vacuum pumps m³/h: 250, saw unit: yes, edgebanding unit: 360 grad/stossverleimung, edgeband hight mm: 60, magazine qty: 2 x 6, radial arm machine: yes, incl. tools: yes, werkstückspannsystem: schmalz, automatic setting up table: yes, available: ca.juni, free text: inkl,messtaster/externe vorkappstation 6-fach rolle, year :1999 MANUFACTURER: HOMAG, TYPE: BAZ 20/50/16/1/KA, YEAR: 1999, CONTROL: NC 83, SOFTWARE: WOODWOOP, BARCODE: YES, WORK PIECE WIDTH MIN-MAX MM: 1600, MIN.-MAX. WORKPIECE LENGTH IN MM: 5600 ODER 2 X 2128, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, WORKING RANGE X: 5600, WORKING RANGE Y-AXIS: 1600, WORKING RANGE Z: 250, C AXIS: YES, PENDULUM PROCESSING: YES, WORK PIECE WIDTH MIN-MAX MM: 1600, MIN.-MAX. WORKPIECE LENGTH IN MM: 5600 ODER 2 X 2128, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, NUMBER OF MILLING SPINDLES VERTICAL: 1, TOOL ADAPTION SYSTEM: HSK 63, MILLING ENGINE 1 HOURS POWER: 12, RPM 1): 1500-18000, KETTENWECHSLER: YES, NUMBER OF TOOLS PER TOOL-MAGAZINE: 70, MITFAHRENDER WERKZEUGWECHSLER: YES, VERTICAL DRILLS-X: 10, DRILL VERTICAL Y: 7, 4 STATION ALLOCATION: YES, STOPS IN THE TABLE FRONT: YES, VACUUM PUMPS M&SUP3;/H: 250, SAW UNIT: YES, EDGEBANDING UNIT: 360 GRAD/STOSSVERLEIMUNG, EDGEBAND HIGHT MM: 60, MAGAZINE QTY: 2 X 6, RADIAL ARM MACHINE: YES, INCL. TOOLS: YES, WERKST&UUML;CKSPANNSYSTEM: SCHMALZ, AUTOMATIC SETTING UP TABLE: YES, AVAILABLE: CA.JUNI, FREE TEXT: INKL,MESSTASTER/EXTERNE VORKAPPSTATION 6-FACH ROLLE, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: kuka
model: kr 100-2 ha
application type: robotics
machine type: robot
availability: immediately
construction year: 2009
production hours: 0
location: germany
origin country: germany


the cell consists of 3 kuka kr 100-2 ha with krc2 controller. two robots are equipped with arm extension. the tig welding robot has 2 additional axes for driving the tilt and turn table. the tilt and turn table has a capacity of approx. 1000 kg. the robots are equipped with kuka safe operation v2.1, motion cooperation 2.1 (the two on the linear axis) and touch sense 1.2. one of the two robots on the linear axis also has two additional axes for controlling the linear axis and the lathe chuck. the linear axis has a length of 8300 mm. due to a business change of the company the automation cell has never been used and comes with 0 production hours. the cell can also be customized according to your production needs.


additional equipment:

- one of the robots has a fixed precitec yw 52 f100/250 llk welding head with cross-jet. the welding head is equipped with a beam splitter module for connecting a kappa observation camera.

- the other two robots are equipped with schunk quick couplers swk210 and one with collision and overload protection opr 131 and can be equipped with various tools. 

- further technical data on request.
 OVERVIEW: BRAND: KUKA MODEL: KR 100-2 HA APPLICATION TYPE: ROBOTICS MACHINE TYPE: ROBOT AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2009 PRODUCTION HOURS: 0 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY THE CELL CONSISTS OF 3 KUKA KR 100-2 HA WITH KRC2 CONTROLLER. TWO ROBOTS ARE EQUIPPED WITH ARM EXTENSION. THE TIG WELDING ROBOT HAS 2 ADDITIONAL AXES FOR DRIVING THE TILT AND TURN TABLE. THE TILT AND TURN TABLE HAS A CAPACITY OF APPROX. 1000 KG. THE ROBOTS ARE EQUIPPED WITH KUKA SAFE OPERATION V2.1, MOTION COOPERATION 2.1 (THE TWO ON THE LINEAR AXIS) AND TOUCH SENSE 1.2. ONE OF THE TWO ROBOTS ON THE LINEAR AXIS ALSO HAS TWO ADDITIONAL AXES FOR CONTROLLING THE LINEAR AXIS AND THE LATHE CHUCK. THE LINEAR AXIS HAS A LENGTH OF 8300 MM. DUE TO A BUSINESS CHANGE OF THE COMPANY THE AUTOMATION CELL HAS NEVER BEEN USED AND COMES WITH 0 PRODUCTION HOURS. THE CELL CAN ALSO BE CUSTOMIZED ACCORDING TO YOUR PRODUCTION NEEDS. ADDITIONAL EQUIPMENT: - ONE OF THE ROBOTS HAS A FIXED PRECITEC YW 52 F100/250 LLK WELDING HEAD WITH CROSS-JET. THE WELDING HEAD IS EQUIPPED WITH A BEAM SPLITTER MODULE FOR CONNECTING A KAPPA OBSERVATION CAMERA. - THE OTHER TWO ROBOTS ARE EQUIPPED WITH SCHUNK QUICK COUPLERS SWK210 AND ONE WITH COLLISION AND OVERLOAD PROTECTION OPR 131 AND CAN BE EQUIPPED WITH VARIOUS TOOLS. - FURTHER TECHNICAL DATA ON REQUEST.
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter:2000 mm<br/>gear width:980 mm<br/>max. module:34 <br/>weight of the machine ca.:20 t<br/>dimensions of the machine ca.:7,9 x 6,0 m<br/>max. helix angle:-35° / +35° °/deg. °<br/>stroke length max.:1000 mm<br/>rotary table diameter:1365 mm<br/>table load:20 t<br/>grinding wheel diameter:400 mm<br/>profile depth:75 mm<br/>power capacity:25 kw<br/><br/>description  cnc-profile gear grinding machine for grinding external spur and helical gears  hydrostatic guideways in rotary table, column, stroke saddle  equipment: * cnc-control kapp d300 for 7 axes: - z, w tangential travel of the slides - b head swivel - y column travel - x stroke saddle - a rotary table - u dresser movement * nc dressing unit with 1 dressing-spindle for diamont-dressing-disc * coolant device * oil-mist extractor * oil-coolant-system * machine housing * touch-probe inside the working-area for gear measuring * electronic hand-wheel * outboard-support * 3 off used dressing rolls  the machine was delivered in 2002 with the following software / options. · scope d300 · external toothing by means of dressable corundum grinding wheels and non-dressing cbn profile grinding wheels. · prepared for internal toothing by means of dressable and dress-free cbn profile grinding wheels · automatic feed control · modem connection incl. remote diagnosis · warm-up program · automatic shape and position correction of the grinding wheel software sms (grinding-measuring-grinding). · automatic generation of nc grinding programs · software for aligning splines with renishaw probes · cycle: align (probe = renishaw) · cycle: stock dividing (probe = renishaw)  the machine can be inspected under power in the factory.  changes and errors in the technical details and information reserved. MAX. WHEEL DIAMETER:2000 MM
GEAR WIDTH:980 MM
MAX. MODULE:34
WEIGHT OF THE MACHINE CA.:20 T
DIMENSIONS OF THE MACHINE CA.:7,9 X 6,0 M
MAX. HELIX ANGLE:-35° / +35° °/DEG. °
STROKE LENGTH MAX.:1000 MM
ROTARY TABLE DIAMETER:1365 MM
TABLE LOAD:20 T
GRINDING WHEEL DIAMETER:400 MM
PROFILE DEPTH:75 MM
POWER CAPACITY:25 KW

DESCRIPTION CNC-PROFILE GEAR GRINDING MACHINE FOR GRINDING EXTERNAL SPUR AND HELICAL GEARS HYDROSTATIC GUIDEWAYS IN ROTARY TABLE, COLUMN, STROKE SADDLE EQUIPMENT: * CNC-CONTROL KAPP D300 FOR 7 AXES: - Z, W TANGENTIAL TRAVEL OF THE SLIDES - B HEAD SWIVEL - Y COLUMN TRAVEL - X STROKE SADDLE - A ROTARY TABLE - U DRESSER MOVEMENT * NC DRESSING UNIT WITH 1 DRESSING-SPINDLE FOR DIAMONT-DRESSING-DISC * COOLANT DEVICE * OIL-MIST EXTRACTOR * OIL-COOLANT-SYSTEM * MACHINE HOUSING * TOUCH-PROBE INSIDE THE WORKING-AREA FOR GEAR MEASURING * ELECTRONIC HAND-WHEEL * OUTBOARD-SUPPORT * 3 OFF USED DRESSING ROLLS THE MACHINE WAS DELIVERED IN 2002 WITH THE FOLLOWING SOFTWARE / OPTIONS. · SCOPE D300 · EXTERNAL TOOTHING BY MEANS OF DRESSABLE CORUNDUM GRINDING WHEELS AND NON-DRESSING CBN PROFILE GRINDING WHEELS. · PREPARED FOR INTERNAL TOOTHING BY MEANS OF DRESSABLE AND DRESS-FREE CBN PROFILE GRINDING WHEELS · AUTOMATIC FEED CONTROL · MODEM CONNECTION INCL. REMOTE DIAGNOSIS · WARM-UP PROGRAM · AUTOMATIC SHAPE AND POSITION CORRECTION OF THE GRINDING WHEEL SOFTWARE SMS (GRINDING-MEASURING-GRINDING). · AUTOMATIC GENERATION OF NC GRINDING PROGRAMS · SOFTWARE FOR ALIGNING SPLINES WITH RENISHAW PROBES · CYCLE: ALIGN (PROBE = RENISHAW) · CYCLE: STOCK DIVIDING (PROBE = RENISHAW) THE MACHINE CAN BE INSPECTED UNDER POWER IN THE FACTORY. CHANGES AND ERRORS IN THE TECHNICAL DETAILS AND INFORMATION RESERVED.
Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Precio: 650 €
Ubicación: Land-saw unit with spahn housing for 400 mm blade
2 kw 2700 rpm
105 mm stroke
pneumatic stroke 
 SAW UNIT WITH SPAHN HOUSING FOR 400 MM BLADE 2 KW 2700 RPM 105 MM STROKE PNEUMATIC STROKE
Vendedor: Jürgen Erdmann
Año de construcción: usado
Ubicación: Land-max. wheel diameter: . mm<br/>gear width: . mm<br/>max. module: . <br/>min. module:  <br/>control:  <br/>total power requirement: 15 kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/>specifications<br/>max. grinding length (mm) 500<br/>max. grinding diameter (mm) Ø 300<br/>speed 5,000 - 25,000<br/>kw 15<br/>voltage 380v<br/>hertz 50<br/><br/> <br/><br/>including:<br/><br/>max. auto feed 15.000 mm/min<br/>max. feed carriage 21.700 mm /min<br/>angle grinding head 0 - 55 degrees<br/>helical pitch 10 - 90.000 mm<br/>max. positioning movement of grinding head 10 mm<br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: . MM
GEAR WIDTH: . MM
MAX. MODULE: .
MIN. MODULE:
CONTROL:
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M

SPECIFICATIONS
MAX. GRINDING LENGTH (MM) 500
MAX. GRINDING DIAMETER (MM) Ø 300
SPEED 5,000 - 25,000
KW 15
VOLTAGE 380V
HERTZ 50



INCLUDING:

MAX. AUTO FEED 15.000 MM/MIN
MAX. FEED CARRIAGE 21.700 MM /MIN
ANGLE GRINDING HEAD 0 - 55 DEGREES
HELICAL PITCH 10 - 90.000 MM
MAX. POSITIONING MOVEMENT OF GRINDING HEAD 10 MM





Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 23.900 €
Ubicación: Land-technische daten: - min. / max. kantendicke 0,4 - 3 mm<br/>- min. / max. werkstückhöhe 10 - 60 mm<br/>- min. werkstückbreite 80 mm<br/>- min. werkstücklänge 150 mm<br/>- motor vorschub 2,2 kw<br/>- stufenlose vorschubgeschwindigkeit 12/16/20 m/min.<br/>- schwenkbares bedienpult am maschineneinlauf in augenhöhe<br/>- beheiztes einlauflineal zur werkstückvorwärmung 0,12 kw<br/>- druckzone mit pneumatisch angetriebener hauptandruckrolle und nachruckrollen zur <br/>  verdichtung der leimfuge<br/>- zentral einstellbarer oberdruck<br/>- leimbecken teflon beschichtet für schmelzkleber-granulat, leistung 2,4 kw<br/>- leimangabe an das werkstück mittels leimrolle<br/>- elektronische temperaturregelung, arbeitstemperatur 180 - 200 cc<br/>- kettenvorschub<br/>- auflageteller für pvc und abs umleimer<br/>- pneumatische rollenkappung<br/>- kontrollampe für werkstückabstand - fügefräsaggregat mit 2 stück dia fügemesserköpfen<br/>  zum anfügen vor dem verleimteil, spindelverstellung vertikal,<br/>  elektropneumatische steuerung horizontal, 2 motoren je 1,8 kw , 200 hz, 12.000 u/min<br/>  (1 x gleich-, 1 x gegenlauf),max. spanabnahme / hub 3 mm - kappsägeaggregat für vorderen- und hinteren kantenüberstand.<br/>  hochpräzise linearführung.<br/>  2 motoren je 0,5 kw, 200 hz, 12.000 u/min<br/>  ziehender kappschnitt für hohe genauigkeit - bündig- und radiusfräsaggregat oben und unten<br/>  mit vertikaler und horizontaler tastung.<br/>  2 motoren je 0,75 kw, 200 hz, 12.000 u/min - formfräsaggregat (eckenkopieren) oben und unten, zum formfräsen von kopfkanten an postformingteilen <br/>  und eckenrunden von pvc-kanten. motor 0,75 kw, 200 hz, 12.000 u/min. - radiusziehklingenaggregat mit spänefangkasten<br/>  abtastung von oben, unten und seitlich<br/>  zum runden von vorgefrästen pvc-kanten. - flächenziehklingenaggregat<br/>  abtastung von oben, unten<br/>  zum abziehen des kleberrestes für eine saubere - schwabbelaggregat zum griffigmachen der kanten oben und unten.<br/>  2 motoren je 0,18 kw, 50 hz, 1400 u/min.<br/>  schräg- und höhenverstellbar - leistungsaufnahme gesamt 13,9 kw / 400 v<br/>- absaugstutzen 3 x fi 120 mm<br/>- druckluftanschluss 6 bar<br/>- abmessungen l=6130, b=1000, h=1600 mm<br/>- gewicht 2500 kg TECHNISCHE DATEN: - MIN. / MAX. KANTENDICKE 0,4 - 3 MM
- MIN. / MAX. WERKSTüCKHöHE 10 - 60 MM
- MIN. WERKSTüCKBREITE 80 MM
- MIN. WERKSTüCKLäNGE 150 MM
- MOTOR VORSCHUB 2,2 KW
- STUFENLOSE VORSCHUBGESCHWINDIGKEIT 12/16/20 M/MIN.
- SCHWENKBARES BEDIENPULT AM MASCHINENEINLAUF IN AUGENHöHE
- BEHEIZTES EINLAUFLINEAL ZUR WERKSTüCKVORWäRMUNG 0,12 KW
- DRUCKZONE MIT PNEUMATISCH ANGETRIEBENER HAUPTANDRUCKROLLE UND NACHRUCKROLLEN ZUR
  VERDICHTUNG DER LEIMFUGE
- ZENTRAL EINSTELLBARER OBERDRUCK
- LEIMBECKEN TEFLON BESCHICHTET FüR SCHMELZKLEBER-GRANULAT, LEISTUNG 2,4 KW
- LEIMANGABE AN DAS WERKSTüCK MITTELS LEIMROLLE
- ELEKTRONISCHE TEMPERATURREGELUNG, ARBEITSTEMPERATUR 180 - 200 CC
- KETTENVORSCHUB
- AUFLAGETELLER FüR PVC UND ABS UMLEIMER
- PNEUMATISCHE ROLLENKAPPUNG
- KONTROLLAMPE FüR WERKSTüCKABSTAND - FüGEFRäSAGGREGAT MIT 2 STüCK DIA FüGEMESSERKöPFEN
  ZUM ANFüGEN VOR DEM VERLEIMTEIL, SPINDELVERSTELLUNG VERTIKAL,
  ELEKTROPNEUMATISCHE STEUERUNG HORIZONTAL, 2 MOTOREN JE 1,8 KW , 200 HZ, 12.000 U/MIN
  (1 X GLEICH-, 1 X GEGENLAUF),MAX. SPANABNAHME / HUB 3 MM - KAPPSäGEAGGREGAT FüR VORDEREN- UND HINTEREN KANTENüBERSTAND.
  HOCHPRäZISE LINEARFüHRUNG.
  2 MOTOREN JE 0,5 KW, 200 HZ, 12.000 U/MIN
  ZIEHENDER KAPPSCHNITT FüR HOHE GENAUIGKEIT - BüNDIG- UND RADIUSFRäSAGGREGAT OBEN UND UNTEN
  MIT VERTIKALER UND HORIZONTALER TASTUNG.
  2 MOTOREN JE 0,75 KW, 200 HZ, 12.000 U/MIN - FORMFRäSAGGREGAT (ECKENKOPIEREN) OBEN UND UNTEN, ZUM FORMFRäSEN VON KOPFKANTEN AN POSTFORMINGTEILEN
  UND ECKENRUNDEN VON PVC-KANTEN. MOTOR 0,75 KW, 200 HZ, 12.000 U/MIN. - RADIUSZIEHKLINGENAGGREGAT MIT SPäNEFANGKASTEN
  ABTASTUNG VON OBEN, UNTEN UND SEITLICH
  ZUM RUNDEN VON VORGEFRäSTEN PVC-KANTEN. - FLäCHENZIEHKLINGENAGGREGAT
  ABTASTUNG VON OBEN, UNTEN
  ZUM ABZIEHEN DES KLEBERRESTES FüR EINE SAUBERE - SCHWABBELAGGREGAT ZUM GRIFFIGMACHEN DER KANTEN OBEN UND UNTEN.
  2 MOTOREN JE 0,18 KW, 50 HZ, 1400 U/MIN.
  SCHRäG- UND HöHENVERSTELLBAR - LEISTUNGSAUFNAHME GESAMT 13,9 KW / 400 V
- ABSAUGSTUTZEN 3 X FI 120 MM
- DRUCKLUFTANSCHLUSS 6 BAR
- ABMESSUNGEN L=6130, B=1000, H=1600 MM
- GEWICHT 2500 KG
Vendedor: Winter Holztechnik GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 300 mm<br/>gear width: 700 mm<br/>max. module: 12 <br/>min. module:  <br/>no. of teeth: 1 - 999 <br/>workpiece length - max.: 700 mm<br/>x-axis: 597 mm<br/>y-axis: 183 mm<br/>a- axis: 360 °<br/>b-axis: 182 °<br/>max.helical angle: +/-60 °<br/>taper diameter: 40 mm<br/>grinding wheel diameter: 200 mm<br/>workpiece diameter: 300 mm<br/>spindle speeds (infinitely variable): 2000 - 10000 u/min<br/>grinding slide work strokes: 550 mm<br/>grinding slide feeds: 15000 mm/min<br/>center distance betw. workpiece-tool min/max.: 200 <br/>max.helical angle: +/- 60 °<br/>pitch max.: 9000 mm<br/>pitch min.: 10 mm<br/>electrics - voltage/frequency: 380 / 50 v/hz<br/>total power requirement: 25 kw<br/>weight of the machine ca.: 6,0 t<br/>dimensions of the machine ca.: 5,6  x 3,4 x 1,7/2,9 m<br/>external gear grinding machine with optronic cnc model d 140 for x,y,b,a axis and external loading crane (250kg)<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 300 MM
GEAR WIDTH: 700 MM
MAX. MODULE: 12
MIN. MODULE:
NO. OF TEETH: 1 - 999
WORKPIECE LENGTH - MAX.: 700 MM
X-AXIS: 597 MM
Y-AXIS: 183 MM
A- AXIS: 360 °
B-AXIS: 182 °
MAX.HELICAL ANGLE: +/-60 °
TAPER DIAMETER: 40 MM
GRINDING WHEEL DIAMETER: 200 MM
WORKPIECE DIAMETER: 300 MM
SPINDLE SPEEDS (INFINITELY VARIABLE): 2000 - 10000 U/MIN
GRINDING SLIDE WORK STROKES: 550 MM
GRINDING SLIDE FEEDS: 15000 MM/MIN
CENTER DISTANCE BETW. WORKPIECE-TOOL MIN/MAX.: 200
MAX.HELICAL ANGLE: +/- 60 °
PITCH MAX.: 9000 MM
PITCH MIN.: 10 MM
ELECTRICS - VOLTAGE/FREQUENCY: 380 / 50 V/HZ
TOTAL POWER REQUIREMENT: 25 KW
WEIGHT OF THE MACHINE CA.: 6,0 T
DIMENSIONS OF THE MACHINE CA.: 5,6 X 3,4 X 1,7/2,9 M
EXTERNAL GEAR GRINDING MACHINE WITH OPTRONIC CNC MODEL D 140 FOR X,Y,B,A AXIS AND EXTERNAL LOADING CRANE (250KG)



Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 4.800 €
Ubicación: Land-kdp 112slk<br/>  caps from the roll up to 3mm edge thickness, gluing and kappsägen up to 5 mm thickness,<br/>  quick heating pool, electr. temperature regulator with led-actual value display, lock of the roller, central height upper pressure beam with integrated feed belt (stored resilient wheels), edge indentation and rolling capping pneumatic, inverter 300 hz,. rf caps saw unit electrically, pneumatically controlled sägeblattØ100mm, high frequency flush milling machine: equipped with combined exchange insert cutters for radius, straight and chamfer cutters, pull-out workpiece support rail front, digital position indicator for feed height adjustment edge thickness and milling, total capacity: ca. 11, 5 kw, heating capacity: 4, 5kw, compressed air connection: approx. 8 bar, weight: ca585kg KDP 112SLK
CAPS FROM THE ROLL UP TO 3MM EDGE THICKNESS, GLUING AND KAPPSäGEN UP TO 5 MM THICKNESS,
QUICK HEATING POOL, ELECTR. TEMPERATURE REGULATOR WITH LED-ACTUAL VALUE DISPLAY, LOCK OF THE ROLLER, CENTRAL HEIGHT UPPER PRESSURE BEAM WITH INTEGRATED FEED BELT (STORED RESILIENT WHEELS), EDGE INDENTATION AND ROLLING CAPPING PNEUMATIC, INVERTER 300 HZ,. RF CAPS SAW UNIT ELECTRICALLY, PNEUMATICALLY CONTROLLED SäGEBLATTØ100MM, HIGH FREQUENCY FLUSH MILLING MACHINE: EQUIPPED WITH COMBINED EXCHANGE INSERT CUTTERS FOR RADIUS, STRAIGHT AND CHAMFER CUTTERS, PULL-OUT WORKPIECE SUPPORT RAIL FRONT, DIGITAL POSITION INDICATOR FOR FEED HEIGHT ADJUSTMENT EDGE THICKNESS AND MILLING, TOTAL CAPACITY: CA. 11, 5 KW, HEATING CAPACITY: 4, 5KW, COMPRESSED AIR CONNECTION: APPROX. 8 BAR, WEIGHT: CA585KG
Vendedor: MSH-Maschinenhandel & Service GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 300 mm<br/>gear width: 700 mm<br/>max. module: 12 <br/>min. module:  <br/>no. of teeth: 1 - 999 <br/>workpiece length - max.: 700 mm<br/>x-axis: 597 mm<br/>y-axis: 183 mm<br/>a- axis: 360 °<br/>b-axis: 182 °<br/>max.helical angle: +/-60 °<br/>taper diameter: 40 mm<br/>grinding wheel diameter: 200 mm<br/>workpiece diameter: 300 mm<br/>spindle speeds (infinitely variable): 1250 - 6300 u/min<br/>grinding slide work strokes: 550 mm<br/>grinding slide feeds: 15000 mm/min<br/>center distance betw. workpiece-tool min/max.: 200 <br/>max.helical angle: +/- 60 °<br/>pitch max.: 9000 mm<br/>pitch min.: 10 mm<br/>electrics - voltage/frequency: 380 / 50 v/hz<br/>total power requirement: 25 kw<br/>weight of the machine ca.: 6,0 t<br/>dimensions of the machine ca.: 5,6  x 3,4 x 1,7/2,9 m<br/>external gear grinding machine with optronic cnc model d 140 for x,y,b,a axis and external loading crane (250kg)<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 300 MM
GEAR WIDTH: 700 MM
MAX. MODULE: 12
MIN. MODULE:
NO. OF TEETH: 1 - 999
WORKPIECE LENGTH - MAX.: 700 MM
X-AXIS: 597 MM
Y-AXIS: 183 MM
A- AXIS: 360 °
B-AXIS: 182 °
MAX.HELICAL ANGLE: +/-60 °
TAPER DIAMETER: 40 MM
GRINDING WHEEL DIAMETER: 200 MM
WORKPIECE DIAMETER: 300 MM
SPINDLE SPEEDS (INFINITELY VARIABLE): 1250 - 6300 U/MIN
GRINDING SLIDE WORK STROKES: 550 MM
GRINDING SLIDE FEEDS: 15000 MM/MIN
CENTER DISTANCE BETW. WORKPIECE-TOOL MIN/MAX.: 200
MAX.HELICAL ANGLE: +/- 60 °
PITCH MAX.: 9000 MM
PITCH MIN.: 10 MM
ELECTRICS - VOLTAGE/FREQUENCY: 380 / 50 V/HZ
TOTAL POWER REQUIREMENT: 25 KW
WEIGHT OF THE MACHINE CA.: 6,0 T
DIMENSIONS OF THE MACHINE CA.: 5,6 X 3,4 X 1,7/2,9 M
EXTERNAL GEAR GRINDING MACHINE WITH OPTRONIC CNC MODEL D 140 FOR X,Y,B,A AXIS AND EXTERNAL LOADING CRANE (250KG)



Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 40.000 €
Ubicación: Land-mixosaturator capacity 22 000 liters


---
we offer new and used machines. with any further questions, please do not hesitate to contact us.  MIXOSATURATOR CAPACITY 22 000 LITERS --- WE OFFER NEW AND USED MACHINES. WITH ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US.
Vendedor: Jawo Tech s.r.o.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 2000 mm<br/>gear width: 980 mm<br/>max. module: 34 <br/>min. module:  <br/>control: kapp d300 <br/>max. helix angle: -35° / +35° °/deg.<br/>stroke length max.: 1000 mm<br/>rotary table dia.: 1365 mm<br/>table load: 20 t<br/>max. dia. of grinding wheel: 400 mm<br/>profile depth: max. 75 mm<br/>power capacity: 25 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 20 t<br/>dimensions of the machine ca.: 7,9 x 6,0 m<br/>cnc-profile gear grinding machine for grinding external spur and helical gears<br/><br/>hydrostatic guideways in rotary table, column, stroke saddle<br/><br/>equipment:<br/>* cnc-control kapp d300 for 7 axes:<br/>- z, w tangential travel of the slides <br/>- b head swivel<br/>- y column travel<br/>- x stroke saddle<br/>- a rotary table<br/>- u dresser movement<br/>* nc dressing unit with 1 dressing-spindle for diamont-dressing-disc<br/>* coolant device<br/>* oil-mist extractor <br/>* oil-coolant-system <br/>* machine housing<br/>* touch-probe inside the working-area for gear measuring<br/>* electronic hand-wheel<br/>* outboard-support<br/>* 3 off used dressing rolls<br/><br/>the machine was delivered in 2002 with the following software / options.<br/>· scope d300<br/>· external toothing by means of dressable corundum grinding wheels and<br/>  non-dressing cbn profile grinding wheels.<br/>· prepared for internal toothing by means of dressable and dress-free cbn      <br/>  profile grinding wheels<br/>· automatic feed control<br/>· modem connection incl. remote diagnosis<br/>· warm-up program<br/>· automatic shape and position correction of the grinding wheel software sms   <br/>  (grinding-measuring-grinding).<br/>· automatic generation of nc grinding programs<br/>· software for aligning splines with renishaw probes<br/>· cycle: align (probe = renishaw)<br/>· cycle: stock dividing (probe = renishaw)<br/><br/>the machine can be inspected under power in the factory.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 2000 MM
GEAR WIDTH: 980 MM
MAX. MODULE: 34
MIN. MODULE:
CONTROL: KAPP D300
MAX. HELIX ANGLE: -35° / +35° °/DEG.
STROKE LENGTH MAX.: 1000 MM
ROTARY TABLE DIA.: 1365 MM
TABLE LOAD: 20 T
MAX. DIA. OF GRINDING WHEEL: 400 MM
PROFILE DEPTH: MAX. 75 MM
POWER CAPACITY: 25 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 20 T
DIMENSIONS OF THE MACHINE CA.: 7,9 X 6,0 M
CNC-PROFILE GEAR GRINDING MACHINE FOR GRINDING EXTERNAL SPUR AND HELICAL GEARS

HYDROSTATIC GUIDEWAYS IN ROTARY TABLE, COLUMN, STROKE SADDLE

EQUIPMENT:
* CNC-CONTROL KAPP D300 FOR 7 AXES:
- Z, W TANGENTIAL TRAVEL OF THE SLIDES
- B HEAD SWIVEL
- Y COLUMN TRAVEL
- X STROKE SADDLE
- A ROTARY TABLE
- U DRESSER MOVEMENT
* NC DRESSING UNIT WITH 1 DRESSING-SPINDLE FOR DIAMONT-DRESSING-DISC
* COOLANT DEVICE
* OIL-MIST EXTRACTOR
* OIL-COOLANT-SYSTEM
* MACHINE HOUSING
* TOUCH-PROBE INSIDE THE WORKING-AREA FOR GEAR MEASURING
* ELECTRONIC HAND-WHEEL
* OUTBOARD-SUPPORT
* 3 OFF USED DRESSING ROLLS

THE MACHINE WAS DELIVERED IN 2002 WITH THE FOLLOWING SOFTWARE / OPTIONS.
· SCOPE D300
· EXTERNAL TOOTHING BY MEANS OF DRESSABLE CORUNDUM GRINDING WHEELS AND
NON-DRESSING CBN PROFILE GRINDING WHEELS.
· PREPARED FOR INTERNAL TOOTHING BY MEANS OF DRESSABLE AND DRESS-FREE CBN
PROFILE GRINDING WHEELS
· AUTOMATIC FEED CONTROL
· MODEM CONNECTION INCL. REMOTE DIAGNOSIS
· WARM-UP PROGRAM
· AUTOMATIC SHAPE AND POSITION CORRECTION OF THE GRINDING WHEEL SOFTWARE SMS
(GRINDING-MEASURING-GRINDING).
· AUTOMATIC GENERATION OF NC GRINDING PROGRAMS
· SOFTWARE FOR ALIGNING SPLINES WITH RENISHAW PROBES
· CYCLE: ALIGN (PROBE = RENISHAW)
· CYCLE: STOCK DIVIDING (PROBE = RENISHAW)

THE MACHINE CAN BE INSPECTED UNDER POWER IN THE FACTORY.




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-mobile package crosscut saw holtec caps star o package cross-section up to 1.25 m x 1.25 m<br/>  o round wood diameter up to 1.60 m<br/>  o electric motor 11 kw<br/>  o pointed tooth chain<br/>  o double-sided stellitierte rail (quad reversible)<br/>  o bar length: 1.90 m MOBILE PACKAGE CROSSCUT SAW HOLTEC CAPS STAR O PACKAGE CROSS-SECTION UP TO 1.25 M X 1.25 M
O ROUND WOOD DIAMETER UP TO 1.60 M
O ELECTRIC MOTOR 11 KW
O POINTED TOOTH CHAIN
O DOUBLE-SIDED STELLITIERTE RAIL (QUAD REVERSIBLE)
O BAR LENGTH: 1.90 M
Vendedor: Kilian Nied Holztechnik
Año de construcción: usado
Ubicación: Land-grinding diameter: 250 mm<br/>grinding length: 780 mm<br/>clamping length: 800 mm<br/>total power requirement: 10 kw<br/>weight of the machine ca.: 6.500 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> GRINDING DIAMETER: 250 MM
GRINDING LENGTH: 780 MM
CLAMPING LENGTH: 800 MM
TOTAL POWER REQUIREMENT: 10 KW
WEIGHT OF THE MACHINE CA.: 6.500 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-the year of the saw is 2001. <br/>  <br/>  universal circular saw joinery carpentry<br/>  type uni 2406 top, cutting height 280 mm<br/>  carpentry universal woodworking circular saw crosscut, miter, miter - and longitudinal section<br/>  cutting height adjustable between 0 and 280 mm above a quick setting<br/>  turntable rotates 180 degrees, thus first and return saws in longitudinal section possible<br/>  moveable blade over spindle between 90 ° and 30 ° (0 °-60 °)<br/>  with laser<br/>  power 11.5 kw, cutting width setting the saw at the longitudinal cut up to 650 mm transverse process of the saw unit, thus fixed rollenbahmn, hand mobile saw unit, pneumatic-assisted<br/>  <br/>  in the saw are only commercially available stuff built up, the man at any time can buy.<br/>  we had no trouble or repair over the years.<br/>  the saw is suitable for the scallop, slitting, trimming, cutting, kappschitte and miter cuts.<br/>  we were very satisfied with the saw and regret it to give away the saw for reasons of space.<br/>  for further information we are available.<br/>  on request, we will send you a video. THE YEAR OF THE SAW IS 2001.

UNIVERSAL CIRCULAR SAW JOINERY CARPENTRY
TYPE UNI 2406 TOP, CUTTING HEIGHT 280 MM
CARPENTRY UNIVERSAL WOODWORKING CIRCULAR SAW CROSSCUT, MITER, MITER - AND LONGITUDINAL SECTION
CUTTING HEIGHT ADJUSTABLE BETWEEN 0 AND 280 MM ABOVE A QUICK SETTING
TURNTABLE ROTATES 180 DEGREES, THUS FIRST AND RETURN SAWS IN LONGITUDINAL SECTION POSSIBLE
MOVEABLE BLADE OVER SPINDLE BETWEEN 90 ° AND 30 ° (0 °-60 °)
WITH LASER
POWER 11.5 KW, CUTTING WIDTH SETTING THE SAW AT THE LONGITUDINAL CUT UP TO 650 MM TRANSVERSE PROCESS OF THE SAW UNIT, THUS FIXED ROLLENBAHMN, HAND MOBILE SAW UNIT, PNEUMATIC-ASSISTED

IN THE SAW ARE ONLY COMMERCIALLY AVAILABLE STUFF BUILT UP, THE MAN AT ANY TIME CAN BUY.
WE HAD NO TROUBLE OR REPAIR OVER THE YEARS.
THE SAW IS SUITABLE FOR THE SCALLOP, SLITTING, TRIMMING, CUTTING, KAPPSCHITTE AND MITER CUTS.
WE WERE VERY SATISFIED WITH THE SAW AND REGRET IT TO GIVE AWAY THE SAW FOR REASONS OF SPACE.
FOR FURTHER INFORMATION WE ARE AVAILABLE.
ON REQUEST, WE WILL SEND YOU A VIDEO.
Vendedor: Tischlereirundum
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 300 mm<br/>gear width: 700 mm<br/>max. module: 5 <br/>min. module: 1 <br/>total power requirement: 15 kw<br/>weight of the machine ca.: 5,5 t<br/>distance between centres / length of workpiece	700	mm<br/>height of centres above table	300	mm<br/>max. grinding length	550	mm<br/>workpiece Ø, min./max.	40 / 300	mm<br/>work spindle bore	120	mm<br/><br/>module range	1 - 5<br/>no. of teeth	1 - 999<br/><br/>grinding wheel speeds	2,000 - 6,000	rpm<br/>grinding wheel Ø, depending on module	40 - 200	mm<br/>grinding slide speed, horizontal, approx.	15	m/min<br/><br/>vertical adjustment of grinding spindle slide, max.	200	mm<br/>cross adjustment of grinding spindle slide	60	mm<br/><br/>spindle drive	4	kw<br/>total electrical load	15 kw  -  380 v  -  50	hz<br/>weight	5,500	kg<br/><br/>accessories / special features<br/>*	ideal machine for finish grinding of external straight teeth, using borazon diamond profile wheels. very suitable for small numbers of workpieces.  grinding wheel has to be changed after approx. 3,000 workpieces.  wheel can be recoated.<br/>*	optronic cnc control, model cnc d 107, for all 4 axes:  x, y, z and a (longitudinal table movement, vertical grinding slide movement, cross grinding slide movement, and indexing/no. of teeth).  all steps can be programmed directly on the control panel, including electronic handwheel, digital display of the program steps, ampere meter for the grinding spindle, digital error display, override, and automatic grinding cycle.<br/>*	crowning is possible via the control (copy function).<br/>*	hydraulic tailstock for workpiece clamping.<br/>*	fully covered working area with automatic sliding doors.     *   washing device.  <br/>*	central lubrication.     *   built-on switch cabinet.     *   built-on hydraulic unit.<br/>at present there is no coolant device available because the machine with connected to a central unit.<br/><br/>condition :  good.  machine can soon be inspected under power.<br/>delivery    :  ex stock, as inspected<br/>payment   :  net, after conclusion of contract<br/><br/>thank you for your interest.  we always have a good selection of gear machines available.  please let us know your requirements.<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 300 MM
GEAR WIDTH: 700 MM
MAX. MODULE: 5
MIN. MODULE: 1
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 5,5 T
DISTANCE BETWEEN CENTRES / LENGTH OF WORKPIECE 700 MM
HEIGHT OF CENTRES ABOVE TABLE 300 MM
MAX. GRINDING LENGTH 550 MM
WORKPIECE Ø, MIN./MAX. 40 / 300 MM
WORK SPINDLE BORE 120 MM

MODULE RANGE 1 - 5
NO. OF TEETH 1 - 999

GRINDING WHEEL SPEEDS 2,000 - 6,000 RPM
GRINDING WHEEL Ø, DEPENDING ON MODULE 40 - 200 MM
GRINDING SLIDE SPEED, HORIZONTAL, APPROX. 15 M/MIN

VERTICAL ADJUSTMENT OF GRINDING SPINDLE SLIDE, MAX. 200 MM
CROSS ADJUSTMENT OF GRINDING SPINDLE SLIDE 60 MM

SPINDLE DRIVE 4 KW
TOTAL ELECTRICAL LOAD 15 KW - 380 V - 50 HZ
WEIGHT 5,500 KG

ACCESSORIES / SPECIAL FEATURES
* IDEAL MACHINE FOR FINISH GRINDING OF EXTERNAL STRAIGHT TEETH, USING BORAZON DIAMOND PROFILE WHEELS. VERY SUITABLE FOR SMALL NUMBERS OF WORKPIECES. GRINDING WHEEL HAS TO BE CHANGED AFTER APPROX. 3,000 WORKPIECES. WHEEL CAN BE RECOATED.
* OPTRONIC CNC CONTROL, MODEL CNC D 107, FOR ALL 4 AXES: X, Y, Z AND A (LONGITUDINAL TABLE MOVEMENT, VERTICAL GRINDING SLIDE MOVEMENT, CROSS GRINDING SLIDE MOVEMENT, AND INDEXING/NO. OF TEETH). ALL STEPS CAN BE PROGRAMMED DIRECTLY ON THE CONTROL PANEL, INCLUDING ELECTRONIC HANDWHEEL, DIGITAL DISPLAY OF THE PROGRAM STEPS, AMPERE METER FOR THE GRINDING SPINDLE, DIGITAL ERROR DISPLAY, OVERRIDE, AND AUTOMATIC GRINDING CYCLE.
* CROWNING IS POSSIBLE VIA THE CONTROL (COPY FUNCTION).
* HYDRAULIC TAILSTOCK FOR WORKPIECE CLAMPING.
* FULLY COVERED WORKING AREA WITH AUTOMATIC SLIDING DOORS. * WASHING DEVICE.
* CENTRAL LUBRICATION. * BUILT-ON SWITCH CABINET. * BUILT-ON HYDRAULIC UNIT.
AT PRESENT THERE IS NO COOLANT DEVICE AVAILABLE BECAUSE THE MACHINE WITH CONNECTED TO A CENTRAL UNIT.

CONDITION : GOOD. MACHINE CAN SOON BE INSPECTED UNDER POWER.
DELIVERY : EX STOCK, AS INSPECTED
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT

THANK YOU FOR YOUR INTEREST. WE ALWAYS HAVE A GOOD SELECTION OF GEAR MACHINES AVAILABLE. PLEASE LET US KNOW YOUR REQUIREMENTS.



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-very nice good working sawmilling for sale !!<br/>  very nice well maintained sawmill line for sale !!<br/>  consisting of:<br/>  log task 4 strands,<br/>  isolation, regular users and depositors,<br/>  fully hydraulic tensioner mayerhofer,<br/>  gate line ewd gdz ge 71 (passage 71 cm)<br/>  riving knife,<br/>  schwartenkappsäge,<br/>  roller conveyor with pullers, cross conveyor for trimming,<br/>  <br/>  edger paul kme ii;<br/>  spreiselabscheider,<br/>  roller conveyor, abwurfrollengang .....<br/>  grinders<br/>  <br/>  very well-kept line!<br/>  ready to work !! VERY NICE GOOD WORKING SAWMILLING FOR SALE !!
VERY NICE WELL MAINTAINED SAWMILL LINE FOR SALE !!
CONSISTING OF:
LOG TASK 4 STRANDS,
ISOLATION, REGULAR USERS AND DEPOSITORS,
FULLY HYDRAULIC TENSIONER MAYERHOFER,
GATE LINE EWD GDZ GE 71 (PASSAGE 71 CM)
RIVING KNIFE,
SCHWARTENKAPPSäGE,
ROLLER CONVEYOR WITH PULLERS, CROSS CONVEYOR FOR TRIMMING,

EDGER PAUL KME II;
SPREISELABSCHEIDER,
ROLLER CONVEYOR, ABWURFROLLENGANG .....
GRINDERS

VERY WELL-KEPT LINE!
READY TO WORK !!
Vendedor: Heindl Handels GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 330 mm<br/>gear width: 700 mm<br/>max. module: 6 <br/>min. module: 1 <br/>total power requirement: 15 kw<br/>weight of the machine ca.: 5,5 t<br/>horizontal gear grinder, straight,<br/>modul 1-6<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 330 MM
GEAR WIDTH: 700 MM
MAX. MODULE: 6
MIN. MODULE: 1
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 5,5 T
HORIZONTAL GEAR GRINDER, STRAIGHT,
MODUL 1-6



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-heated blankets embossing machine krause old and unkapputbar<br/>  380 volts with thermostat; good HEATED BLANKETS EMBOSSING MACHINE KRAUSE OLD AND UNKAPPUTBAR
380 VOLTS WITH THERMOSTAT; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 300 mm<br/>gear width: 750 mm<br/>max. module: 10 <br/>total power requirement: 20 kw<br/>weight of the machine ca.: 7,5 t<br/>k a p p<br/>cnc-controlled horizontal gear and profile grinding machine<br/>model vas 482 cnc                 year 1984               serial no. 40.208<br/>__________________________________________________________________<br/>distance between centres / length of workpiece	750	mm<br/>height of centres above table			200	mm<br/>max. grinding length			550	mm<br/>workpiece Ø, min./max.	40 / 300	mm<br/>work spindle bore		120	mm<br/><br/>module range	1 - 10<br/>no. of teeth	1 - 999<br/><br/>grinding wheel speeds			2,000 - 16,000	rpm<br/>grinding wheel Ø, depending on module	40 - 200	mm<br/><br/>vertical adjustment of grinding spindle slide, max.	200	mm<br/>cross adjustment of grinding spindle slide	100	mm<br/><br/>spindle drive		6	kw<br/>total electrical load		20 kw  -  380 v  -  50	hz<br/>weight			7,500	kg<br/><br/>accessories / special features<br/>*	ideal machine for finish grinding of external straight and helical teeth, using borazon diamond profile wheels.   very suitable for small numbers of workpieces.  grinding wheel has to be changed after approx. 3,000 workpieces.  wheel can be recoated.<br/>*	optronic cnc control, model cnc d 140, for all 4 axes:  x, y, a and b (longitudinal table movement, vertical grinding slide movement, indexing/no. of teeth, and helical angle).  all steps can be programmed directly on the control panel, including electronic handwheel, digital display of the program steps, ampere meter for the grinding spindle, digital error display, override, and automatic grinding cycle.<br/>*	crowning is possible via the control (copy function).<br/>*	infinitely variable adjustment of grinding spindle drive 0 - 16,000 rpm.<br/>*	approx. 6 assorted grinding spindle units are available for easy change on grinding head.<br/>*	hydraulic tailstock for workpiece clamping.<br/>*	fully covered working area with automatic sliding doors.     *   washing device.  <br/>*	electronic centering device for finding the tooth gap.     *   workpiece pre-centering on table.<br/>*	central lubrication.     *   built-on switch cabinet.     *   built-on hydraulic unit.<br/>at present there is no coolant device available because the machine was connected to a central unit.<br/><br/><br/><br/>condition :  good.  machine can soon be inspected under power.<br/>delivery    :  ex stock, as inspected<br/>payment   :  net, after conclusion of contract<br/><br/>thank you for your interest.  we always have a good selection of gear machines available.  please let us know your requirements.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 300 MM
GEAR WIDTH: 750 MM
MAX. MODULE: 10
TOTAL POWER REQUIREMENT: 20 KW
WEIGHT OF THE MACHINE CA.: 7,5 T
K A P P
CNC-CONTROLLED HORIZONTAL GEAR AND PROFILE GRINDING MACHINE
MODEL VAS 482 CNC YEAR 1984 SERIAL NO. 40.208
__________________________________________________________________
DISTANCE BETWEEN CENTRES / LENGTH OF WORKPIECE 750 MM
HEIGHT OF CENTRES ABOVE TABLE 200 MM
MAX. GRINDING LENGTH 550 MM
WORKPIECE Ø, MIN./MAX. 40 / 300 MM
WORK SPINDLE BORE 120 MM

MODULE RANGE 1 - 10
NO. OF TEETH 1 - 999

GRINDING WHEEL SPEEDS 2,000 - 16,000 RPM
GRINDING WHEEL Ø, DEPENDING ON MODULE 40 - 200 MM

VERTICAL ADJUSTMENT OF GRINDING SPINDLE SLIDE, MAX. 200 MM
CROSS ADJUSTMENT OF GRINDING SPINDLE SLIDE 100 MM

SPINDLE DRIVE 6 KW
TOTAL ELECTRICAL LOAD 20 KW - 380 V - 50 HZ
WEIGHT 7,500 KG

ACCESSORIES / SPECIAL FEATURES
* IDEAL MACHINE FOR FINISH GRINDING OF EXTERNAL STRAIGHT AND HELICAL TEETH, USING BORAZON DIAMOND PROFILE WHEELS. VERY SUITABLE FOR SMALL NUMBERS OF WORKPIECES. GRINDING WHEEL HAS TO BE CHANGED AFTER APPROX. 3,000 WORKPIECES. WHEEL CAN BE RECOATED.
* OPTRONIC CNC CONTROL, MODEL CNC D 140, FOR ALL 4 AXES: X, Y, A AND B (LONGITUDINAL TABLE MOVEMENT, VERTICAL GRINDING SLIDE MOVEMENT, INDEXING/NO. OF TEETH, AND HELICAL ANGLE). ALL STEPS CAN BE PROGRAMMED DIRECTLY ON THE CONTROL PANEL, INCLUDING ELECTRONIC HANDWHEEL, DIGITAL DISPLAY OF THE PROGRAM STEPS, AMPERE METER FOR THE GRINDING SPINDLE, DIGITAL ERROR DISPLAY, OVERRIDE, AND AUTOMATIC GRINDING CYCLE.
* CROWNING IS POSSIBLE VIA THE CONTROL (COPY FUNCTION).
* INFINITELY VARIABLE ADJUSTMENT OF GRINDING SPINDLE DRIVE 0 - 16,000 RPM.
* APPROX. 6 ASSORTED GRINDING SPINDLE UNITS ARE AVAILABLE FOR EASY CHANGE ON GRINDING HEAD.
* HYDRAULIC TAILSTOCK FOR WORKPIECE CLAMPING.
* FULLY COVERED WORKING AREA WITH AUTOMATIC SLIDING DOORS. * WASHING DEVICE.
* ELECTRONIC CENTERING DEVICE FOR FINDING THE TOOTH GAP. * WORKPIECE PRE-CENTERING ON TABLE.
* CENTRAL LUBRICATION. * BUILT-ON SWITCH CABINET. * BUILT-ON HYDRAULIC UNIT.
AT PRESENT THERE IS NO COOLANT DEVICE AVAILABLE BECAUSE THE MACHINE WAS CONNECTED TO A CENTRAL UNIT.



CONDITION : GOOD. MACHINE CAN SOON BE INSPECTED UNDER POWER.
DELIVERY : EX STOCK, AS INSPECTED
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT

THANK YOU FOR YOUR INTEREST. WE ALWAYS HAVE A GOOD SELECTION OF GEAR MACHINES AVAILABLE. PLEASE LET US KNOW YOUR REQUIREMENTS.




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-mech. power max 9000 cycles/hour<br/>  max sheet size l baste 365 x b305 mm<br/>  min. sheet size l baste 145 x b100 mm<br/>  book thickness up to 10 mm<br/>  maximum book format l 360 x cropped b300 mm<br/>  minimum book format l 140, b 75 cropped mm asir 3 on all investors 4 double compact investors 1555 (of which 1 investors tiltable for hand conditioning in 3 places by e.g. konturgestanzten bow parts)<br/>  1 hand conditioning station<br/>  1 envelope folding feeder 1528<br/>  1 stapling machine 1550 with touch screen<br/>  -with side thickness control semko<br/>  2 stitching heads hk 75<br/>  1 three cutters 1565 medium cutter<br/>  1 delivery 1564 with gap compensation and controlled drive<br/>  3 pressure-vacuum pumps kta 80 in a laermgekappselten air oven; verry good MECH. POWER MAX 9000 CYCLES/HOUR
MAX SHEET SIZE L BASTE 365 X B305 MM
MIN. SHEET SIZE L BASTE 145 X B100 MM
BOOK THICKNESS UP TO 10 MM
MAXIMUM BOOK FORMAT L 360 X CROPPED B300 MM
MINIMUM BOOK FORMAT L 140, B 75 CROPPED MM ASIR 3 ON ALL INVESTORS 4 DOUBLE COMPACT INVESTORS 1555 (OF WHICH 1 INVESTORS TILTABLE FOR HAND CONDITIONING IN 3 PLACES BY E.G. KONTURGESTANZTEN BOW PARTS)
1 HAND CONDITIONING STATION
1 ENVELOPE FOLDING FEEDER 1528
1 STAPLING MACHINE 1550 WITH TOUCH SCREEN
-WITH SIDE THICKNESS CONTROL SEMKO
2 STITCHING HEADS HK 75
1 THREE CUTTERS 1565 MEDIUM CUTTER
1 DELIVERY 1564 WITH GAP COMPENSATION AND CONTROLLED DRIVE
3 PRESSURE-VACUUM PUMPS KTA 80 IN A LAERMGEKAPPSELTEN AIR OVEN; VERRY GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 250 mm<br/>gear width: 320 mm<br/>max. module: 10 <br/>min. module: 0,1 <br/>number of teeth: 2 - 999 <br/>max.helical angle: +/- 90 °<br/>grinding wheel diameter: max 200 mm<br/>x-axis: 320 mm<br/>y-axis: 150 mm<br/>z-axis: +/- 81,5 mm<br/>a- axis: 360 °<br/>b-axis: +/- 90 °<br/>control:  <br/>total power requirement: kapp d 200 cnc<br/>weight of the machine ca.: 9,5 t<br/>dimensions of the machine ca.: 5,1 x 4,3 x 2,6 m<br/>with complete cooling system <br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 250 MM
GEAR WIDTH: 320 MM
MAX. MODULE: 10
MIN. MODULE: 0,1
NUMBER OF TEETH: 2 - 999
MAX.HELICAL ANGLE: +/- 90 °
GRINDING WHEEL DIAMETER: MAX 200 MM
X-AXIS: 320 MM
Y-AXIS: 150 MM
Z-AXIS: +/- 81,5 MM
A- AXIS: 360 °
B-AXIS: +/- 90 °
CONTROL:
TOTAL POWER REQUIREMENT: KAPP D 200 CNC
WEIGHT OF THE MACHINE CA.: 9,5 T
DIMENSIONS OF THE MACHINE CA.: 5,1 X 4,3 X 2,6 M
WITH COMPLETE COOLING SYSTEM




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 3.700 €
Ubicación: Land-saw - motor 3.2 kw
 saw diameter 350 mm
 saw shaft diameter 40 mm
 saw speed 2800 rpm
 cutting speed m2-20 m / min horizontal axis - rotation - 60 â° 0 + 60 â°
 vertical axis - bevel 0 + 45 â°
 total weight of machine 1000 kg
 working table 2, 5 m in front of saw - 2.5 after saw
 table height 850 mm
 table width 500 mm
 machine dimensions: l b 5000 x 1950 x h 1650 mm SAW - MOTOR 3.2 KW SAW DIAMETER 350 MM SAW SHAFT DIAMETER 40 MM SAW SPEED 2800 RPM CUTTING SPEED M2-20 M / MIN HORIZONTAL AXIS - ROTATION - 60 &ACIRC;&DEG; 0 + 60 &ACIRC;&DEG; VERTICAL AXIS - BEVEL 0 + 45 &ACIRC;&DEG; TOTAL WEIGHT OF MACHINE 1000 KG WORKING TABLE 2, 5 M IN FRONT OF SAW - 2.5 AFTER SAW TABLE HEIGHT 850 MM TABLE WIDTH 500 MM MACHINE DIMENSIONS: L B 5000 X 1950 X H 1650 MM
Vendedor: Dematech s.r.o
Año de construcción: usado
Ubicación: Land-max. wheel diameter:240 mm<br/>gear width:450 mm<br/>max. module:5 <br/>min. module:1 <br/>max. number of teeth: <br/>min. number of teeth: <br/>workpiece weight: kg<br/>grinding wheel size: mm<br/>grinding spindle turning speeds at profiling: u/min<br/>spindle speeds (infinitely variable): u/min<br/>feed:: mm<br/>total power requirement: kw<br/>weight of the machine ca.:13 t<br/>dimensions of the machine ca.:7,93 x 4,85 x 2,52 m<br/>tip circle diameter:250 mm<br/>module range:0,5-10 profilschleifen <br/>max.helical angle:-+45 °<br/><br/>gear grinding machine in good condition equipped with: - loading- unloading unit - workpiece belt conveyor - dittel grinding wheel balancing device - reishaeur motor-driven diamond-wheel profiling device model rp-1+2sw, built onto the dressing  - various change gears for profiling the grinding worm.     - fully covered working area - separate switch and control cabinet, separate hydraulic unit in the cabin - grinding wheel flanges MAX. WHEEL DIAMETER:240 MM
GEAR WIDTH:450 MM
MAX. MODULE:5
MIN. MODULE:1
MAX. NUMBER OF TEETH:
MIN. NUMBER OF TEETH:
WORKPIECE WEIGHT: KG
GRINDING WHEEL SIZE: MM
GRINDING SPINDLE TURNING SPEEDS AT PROFILING: U/MIN
SPINDLE SPEEDS (INFINITELY VARIABLE): U/MIN
FEED:: MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.:13 T
DIMENSIONS OF THE MACHINE CA.:7,93 X 4,85 X 2,52 M
TIP CIRCLE DIAMETER:250 MM
MODULE RANGE:0,5-10 PROFILSCHLEIFEN
MAX.HELICAL ANGLE:-+45 °

GEAR GRINDING MACHINE IN GOOD CONDITION EQUIPPED WITH: - LOADING- UNLOADING UNIT - WORKPIECE BELT CONVEYOR - DITTEL GRINDING WHEEL BALANCING DEVICE - REISHAEUR MOTOR-DRIVEN DIAMOND-WHEEL PROFILING DEVICE MODEL RP-1+2SW, BUILT ONTO THE DRESSING - VARIOUS CHANGE GEARS FOR PROFILING THE GRINDING WORM. - FULLY COVERED WORKING AREA - SEPARATE SWITCH AND CONTROL CABINET, SEPARATE HYDRAULIC UNIT IN THE CABIN - GRINDING WHEEL FLANGES
Vendedor: HD Werkzeugmaschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KAPP types: