87 ofertas

Año de construcción: usado
Ubicación: Land-spaenefoerderer-knoll-200-s1-27-02-137
shipping time: immediately

number: 27-02-137

manufacturer: knoll
type: 200-s1

machine data
year of construction: approx. 1986
l x w x h: approx. 2200 x 600 x 1400 mm
weight: 350 kg

very good condition

technical data
dimensions module:
length: 1500 mm
width: 280 mm
discharge height: 1100 mm

accessories
other accessories on request
price and other specifications on request SPAENEFOERDERER-KNOLL-200-S1-27-02-137 SHIPPING TIME: IMMEDIATELY NUMBER: 27-02-137 MANUFACTURER: KNOLL TYPE: 200-S1 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1986 L X W X H: APPROX. 2200 X 600 X 1400 MM WEIGHT: 350 KG VERY GOOD CONDITION TECHNICAL DATA DIMENSIONS MODULE: LENGTH: 1500 MM WIDTH: 280 MM DISCHARGE HEIGHT: 1100 MM ACCESSORIES OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 560 mm<br/>z-travel: 600 mm<br/>control: heidenhain itnc 530 <br/>total power requirement: 70 kw<br/>weight of the machine ca.: 11.000 kg<br/>dimensions of the machine ca.:  m<br/>d e c k e l   m a h o      (germany)<br/>vertical cnc machining centre with high speed linear drives <br/>in 3 axis and in double column design for high precision work<br/>model  dmc 75 v linear                         year      2005<br/>_______________________________________________________                          <br/><br/>working range: longitudinal stroke x axis                      750    mm<br/>               vertical stroke     z axis                      600    mm<br/>               cross stroke        y axis                      560    mm<br/><br/>table clamping size                                      950 x 650    mm<br/>max. table load                                              1.000    kg<br/>max. height of workpiece                                       600    mm<br/><br/>tool holder cone                                            hsk 63<br/>spindle (kessler) speeds                                    18,000    rpm<br/>torque, max.                                                86/130    nm<br/>spindle run-up time / stop time                                3.2    sec<br/><br/>feeds / quickfeeds, x, y and z axes max.                    90,000    mm/min<br/>feed force                                            11.000/9.500    n<br/>axis acceleration, x / y / z axes                     15 / 12 / 18    m/s<br/><br/>spindle drive                     25/35    kw<br/>total electrical load, approx.       75    kw  -  400 v  -  50    hz<br/>weight, approx.                  11.000    kg<br/><br/>accessories / special features:<br/><br/>this machine is very interesting because of the very stable double column <br/>portal design and with the modern linear technology for fast and powerful <br/>high precision work.<br/> <br/>*   heidenhain modern  cnc control system model itnc 530 in 3 axes, with all <br/>    the usual options, cycles and sub programmes.<br/>*   table moves only in x axis and allows a comfortable loading of heavy <br/>    workpieces<br/>*   30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. <br/>    length 300 mm.  max. weight 10 kg.  cut-to-cut time 6 sec. pick-up by <br/>    main spindle.<br/>*   blum tool-breakage control, blum receiver for renishaw ?head, no head <br/>    available.<br/>*   double linear motors ensure very fast feed motions and strong feed power, <br/>    equipped with own cooling system.<br/>*   kessler milling spindle, liquid-cooled, steplessly programmable up to 18.000 rpm <br/>*   completely covered working area with 2 sliding doors, one with spin-type bull-eye.<br/>*   knoll coolant device with scraper-type chip conveyor and pressure pomp.<br/>*   spindle working hours approx. 23.000  h<br/><br/>condition   :     very good.  machine can soon be inspected under power.<br/>delivery    :     ex stock, as inspected.            <br/>payment     :     net, after conclusion of contract.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 560 MM
Z-TRAVEL: 600 MM
CONTROL: HEIDENHAIN ITNC 530
TOTAL POWER REQUIREMENT: 70 KW
WEIGHT OF THE MACHINE CA.: 11.000 KG
DIMENSIONS OF THE MACHINE CA.: M
D E C K E L M A H O (GERMANY)
VERTICAL CNC MACHINING CENTRE WITH HIGH SPEED LINEAR DRIVES
IN 3 AXIS AND IN DOUBLE COLUMN DESIGN FOR HIGH PRECISION WORK
MODEL DMC 75 V LINEAR YEAR 2005
_______________________________________________________

WORKING RANGE: LONGITUDINAL STROKE X AXIS 750 MM
VERTICAL STROKE Z AXIS 600 MM
CROSS STROKE Y AXIS 560 MM

TABLE CLAMPING SIZE 950 X 650 MM
MAX. TABLE LOAD 1.000 KG
MAX. HEIGHT OF WORKPIECE 600 MM

TOOL HOLDER CONE HSK 63
SPINDLE (KESSLER) SPEEDS 18,000 RPM
TORQUE, MAX. 86/130 NM
SPINDLE RUN-UP TIME / STOP TIME 3.2 SEC

FEEDS / QUICKFEEDS, X, Y AND Z AXES MAX. 90,000 MM/MIN
FEED FORCE 11.000/9.500 N
AXIS ACCELERATION, X / Y / Z AXES 15 / 12 / 18 M/S

SPINDLE DRIVE 25/35 KW
TOTAL ELECTRICAL LOAD, APPROX. 75 KW - 400 V - 50 HZ
WEIGHT, APPROX. 11.000 KG

ACCESSORIES / SPECIAL FEATURES:

THIS MACHINE IS VERY INTERESTING BECAUSE OF THE VERY STABLE DOUBLE COLUMN
PORTAL DESIGN AND WITH THE MODERN LINEAR TECHNOLOGY FOR FAST AND POWERFUL
HIGH PRECISION WORK.

* HEIDENHAIN MODERN CNC CONTROL SYSTEM MODEL ITNC 530 IN 3 AXES, WITH ALL
THE USUAL OPTIONS, CYCLES AND SUB PROGRAMMES.
* TABLE MOVES ONLY IN X AXIS AND ALLOWS A COMFORTABLE LOADING OF HEAVY
WORKPIECES
* 30-POSITION DISKTYPE TOOL MAGAZINE FOR MAX. TOOL Ø 100, 140 AND 200 MM X MAX.
LENGTH 300 MM. MAX. WEIGHT 10 KG. CUT-TO-CUT TIME 6 SEC. PICK-UP BY
MAIN SPINDLE.
* BLUM TOOL-BREAKAGE CONTROL, BLUM RECEIVER FOR RENISHAW ?HEAD, NO HEAD
AVAILABLE.
* DOUBLE LINEAR MOTORS ENSURE VERY FAST FEED MOTIONS AND STRONG FEED POWER,
EQUIPPED WITH OWN COOLING SYSTEM.
* KESSLER MILLING SPINDLE, LIQUID-COOLED, STEPLESSLY PROGRAMMABLE UP TO 18.000 RPM
* COMPLETELY COVERED WORKING AREA WITH 2 SLIDING DOORS, ONE WITH SPIN-TYPE BULL-EYE.
* KNOLL COOLANT DEVICE WITH SCRAPER-TYPE CHIP CONVEYOR AND PRESSURE POMP.
* SPINDLE WORKING HOURS APPROX. 23.000 H

CONDITION : VERY GOOD. MACHINE CAN SOON BE INSPECTED UNDER POWER.
DELIVERY : EX STOCK, AS INSPECTED.
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT.





Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-cnc bta deep hole boring machine gildemeister & knoll

drilling capacity: ã? 22 - ã? 250 mm
drilling depth: 0-2,200 mm
cnc control: siemens 840 d (new in 2012)
 	 
x axis: 2000 mm
y-axis: 2.200 mm
z-axis: 500 mm
 	 
spindle speeds: 0-800 rpm.
spindle feed: 0-4,000 rpm.
table dimensions: 1500 x 2,000 mm
table load: 10,000 kg
 	 
equipped with:
	-drill pipes, drill setups, drill bushings, dampers, etc.
 	-2 elb bezel
 	-various accessories
 	-operating instructions
 	-new control in 2012
 	 
country of origin: germany
machine weight: 10 ton
machine lxwxh: 6,000 x 5,000 x 1.600 mm CNC BTA DEEP HOLE BORING MACHINE GILDEMEISTER & KNOLL DRILLING CAPACITY: &ATILDE;? 22 - &ATILDE;? 250 MM DRILLING DEPTH: 0-2,200 MM CNC CONTROL: SIEMENS 840 D (NEW IN 2012) X AXIS: 2000 MM Y-AXIS: 2.200 MM Z-AXIS: 500 MM SPINDLE SPEEDS: 0-800 RPM. SPINDLE FEED: 0-4,000 RPM. TABLE DIMENSIONS: 1500 X 2,000 MM TABLE LOAD: 10,000 KG EQUIPPED WITH: -DRILL PIPES, DRILL SETUPS, DRILL BUSHINGS, DAMPERS, ETC. -2 ELB BEZEL -VARIOUS ACCESSORIES -OPERATING INSTRUCTIONS -NEW CONTROL IN 2012 COUNTRY OF ORIGIN: GERMANY MACHINE WEIGHT: 10 TON MACHINE LXWXH: 6,000 X 5,000 X 1.600 MM
Vendedor: Valk Machines B.V.
Año de construcción: usado
Ubicación: Land-faceplate diameter: 2000 mm<br/>swing diameter: 2400 mm<br/>turning height: 2000 mm<br/>max. workpiece weight: 20.000 kg<br/>vertical adjustment of the crossrail: ------- mm<br/>travel -x axis: 2400 mm<br/>travel -y axis: 2400 mm<br/>travel -z axis: 2000 mm<br/>control: siemens 840d <br/>number of controlled axis: 3 <br/>turning speed range: 2 - 224 u/min<br/>power capacity: 80 kw<br/>rapid speed: 6 m/min<br/>max. torque on the faceplate:  <br/>no. of tools in the magazine: 60 stück<br/>milling drive: 37 kw<br/>turning speed range - milling: 2000 u/min<br/>number of working hours: 750 h<br/>weight of the machine ca.: 100 t<br/>dimensions: 10,5 x 10,5 x 7,0 m<br/>cnc- vtl with milling- and grinding spindle. condition like new.<br/><br/>- coolant system and chip conveyor knoll<br/>- digital scales all axis<br/>- grinding spindel 3 kw/ 3.000 rpm<br/>- hydrostatic slideways<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 2000 MM
SWING DIAMETER: 2400 MM
TURNING HEIGHT: 2000 MM
MAX. WORKPIECE WEIGHT: 20.000 KG
VERTICAL ADJUSTMENT OF THE CROSSRAIL: ------- MM
TRAVEL -X AXIS: 2400 MM
TRAVEL -Y AXIS: 2400 MM
TRAVEL -Z AXIS: 2000 MM
CONTROL: SIEMENS 840D
NUMBER OF CONTROLLED AXIS: 3
TURNING SPEED RANGE: 2 - 224 U/MIN
POWER CAPACITY: 80 KW
RAPID SPEED: 6 M/MIN
MAX. TORQUE ON THE FACEPLATE:
NO. OF TOOLS IN THE MAGAZINE: 60 STüCK
MILLING DRIVE: 37 KW
TURNING SPEED RANGE - MILLING: 2000 U/MIN
NUMBER OF WORKING HOURS: 750 H
WEIGHT OF THE MACHINE CA.: 100 T
DIMENSIONS: 10,5 X 10,5 X 7,0 M
CNC- VTL WITH MILLING- AND GRINDING SPINDLE. CONDITION LIKE NEW.

- COOLANT SYSTEM AND CHIP CONVEYOR KNOLL
- DIGITAL SCALES ALL AXIS
- GRINDING SPINDEL 3 KW/ 3.000 RPM
- HYDROSTATIC SLIDEWAYS




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-vertical machining center
x 800 y500 z600
spindle sk 50 jis 6339 (mas-bt)
tool magazine 30 seats
internal coolant supply with knoll filter system
control msc-501 (fanuc)
 VERTICAL MACHINING CENTER X 800 Y500 Z600 SPINDLE SK 50 JIS 6339 (MAS-BT) TOOL MAGAZINE 30 SEATS INTERNAL COOLANT SUPPLY WITH KNOLL FILTER SYSTEM CONTROL MSC-501 (FANUC)
Vendedor: Coenders Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 1.400 €
Ubicación: Land-weight approx.: 650 kg<br/>dimensions (l x w x h) approx.: 1600 x 1200 x 1400 mm<br/>description: very little used hydrostatic filter unit. cool water tank 500 liters, with high pressure cooling pump knoll kts-25-50-t, double mahle filter WEIGHT APPROX.: 650 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1200 X 1400 MM
DESCRIPTION: VERY LITTLE USED HYDROSTATIC FILTER UNIT. COOL WATER TANK 500 LITERS, WITH HIGH PRESSURE COOLING PUMP KNOLL KTS-25-50-T, DOUBLE MAHLE FILTER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-advance notice:
cam controlled multi spindle automatic lathe, used
8 main spindles, max. bar diameter 35mm
pick up for rear machining
stock stand and reel,     
bar loader iemca pra iemca pra 52/33p rack type magazine
high pressure coolant pump knoll ae 1058,
coolant chiller hyfra vwk110-1-5
tooling: could be different like pictures 
 ADVANCE NOTICE: CAM CONTROLLED MULTI SPINDLE AUTOMATIC LATHE, USED 8 MAIN SPINDLES, MAX. BAR DIAMETER 35MM PICK UP FOR REAR MACHINING STOCK STAND AND REEL, BAR LOADER IEMCA PRA IEMCA PRA 52/33P RACK TYPE MAGAZINE HIGH PRESSURE COOLANT PUMP KNOLL AE 1058, COOLANT CHILLER HYFRA VWK110-1-5 TOOLING: COULD BE DIFFERENT LIKE PICTURES
Vendedor: TAR-Maschinen OHG - Vierkotten
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 7200 kg<br/>dimensions (l x w x h) approx.: 3400 x 3300 x 2910 mm<br/>description: table size 900 x 550 mm, table load 800 kg, displacements x / y / z 700/630/480 mm, feed rates up to 10 m / min, rapid traverse 30 m / min, spindle intake din 69871-40 (sk 40), spindle speed 30-8000 rpm, 30 tools in warehouse, control dialog 112, blum tool break detection, knoll clamping conveyor WEIGHT APPROX.: 7200 KG
DIMENSIONS (L X W X H) APPROX.: 3400 X 3300 X 2910 MM
DESCRIPTION: TABLE SIZE 900 X 550 MM, TABLE LOAD 800 KG, DISPLACEMENTS X / Y / Z 700/630/480 MM, FEED RATES UP TO 10 M / MIN, RAPID TRAVERSE 30 M / MIN, SPINDLE INTAKE DIN 69871-40 (SK 40), SPINDLE SPEED 30-8000 RPM, 30 TOOLS IN WAREHOUSE, CONTROL DIALOG 112, BLUM TOOL BREAK DETECTION, KNOLL CLAMPING CONVEYOR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-chip conveyor knoll 240-s1-
27-02-149
shipping time: immediately

number: 27-02-149

manufacturer: knoll
type: 240-s1

machine data
year of construction: approx. 1987
l x w x h: approx. 2500 x 600 x 1100 mm
weight: 350 kg

good general condition

technical data
dimensions module:
length: 1150 mm
width: approx. 360 mm
height: approx. 220 mm
band width: approx. 210 mm
discharge height: 800 mm

accessories
other accessories on request
price and other specifications on request CHIP CONVEYOR KNOLL 240-S1- 27-02-149 SHIPPING TIME: IMMEDIATELY NUMBER: 27-02-149 MANUFACTURER: KNOLL TYPE: 240-S1 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1987 L X W X H: APPROX. 2500 X 600 X 1100 MM WEIGHT: 350 KG GOOD GENERAL CONDITION TECHNICAL DATA DIMENSIONS MODULE: LENGTH: 1150 MM WIDTH: APPROX. 360 MM HEIGHT: APPROX. 220 MM BAND WIDTH: APPROX. 210 MM DISCHARGE HEIGHT: 800 MM ACCESSORIES OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-grinding length: 3000 mm<br/>grinding width: 250 mm<br/>workpiece height: 250 mm<br/>control: ab osai8600 <br/>max. workpiece diameter: 250 mm<br/>grinding wheel diam. min/max.: 330 / 460 <br/>longitudinal stroke: z: 3.000 mm<br/>vertical stroke: y: 185 mm<br/>clamping length max.: 3.800 mm<br/>grinding wheel peripheral speeds:: 35 m/s<br/>w-axis: +38 / -52 mm<br/>total power requirement: 40,00 kw<br/>weight of the machine ca.: 15,00 t<br/>dimensions of the machine ca.: 9,00 x 4,00 x h3,70 m<br/>profile grinding machine with allen bradley osai8600 control,<br/>autom. balancing device, coolant unit knoll,<br/>several grinding wheels and steadys.<br/>x-axis: workpiece rotation (0 - 360 °)<br/>y-axis: grinding wheels cross slide (+4 / -184mm)<br/>z-axis: longitudinal slide (+2935 / -25mm)<br/>w axis: pitch angle (+38 / -53 °)<br/><br/><br/><br/><br/> GRINDING LENGTH: 3000 MM
GRINDING WIDTH: 250 MM
WORKPIECE HEIGHT: 250 MM
CONTROL: AB OSAI8600
MAX. WORKPIECE DIAMETER: 250 MM
GRINDING WHEEL DIAM. MIN/MAX.: 330 / 460
LONGITUDINAL STROKE: Z: 3.000 MM
VERTICAL STROKE: Y: 185 MM
CLAMPING LENGTH MAX.: 3.800 MM
GRINDING WHEEL PERIPHERAL SPEEDS:: 35 M/S
W-AXIS: +38 / -52 MM
TOTAL POWER REQUIREMENT: 40,00 KW
WEIGHT OF THE MACHINE CA.: 15,00 T
DIMENSIONS OF THE MACHINE CA.: 9,00 X 4,00 X H3,70 M
PROFILE GRINDING MACHINE WITH ALLEN BRADLEY OSAI8600 CONTROL,
AUTOM. BALANCING DEVICE, COOLANT UNIT KNOLL,
SEVERAL GRINDING WHEELS AND STEADYS.
X-AXIS: WORKPIECE ROTATION (0 - 360 °)
Y-AXIS: GRINDING WHEELS CROSS SLIDE (+4 / -184MM)
Z-AXIS: LONGITUDINAL SLIDE (+2935 / -25MM)
W AXIS: PITCH ANGLE (+38 / -53 °)




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-knoll filter-system for grinding oil
beagv08srp
built in 2003 KNOLL FILTER-SYSTEM FOR GRINDING OIL BEAGV08SRP BUILT IN 2003
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.200 €
Ubicación: Land-weight approx.: 2500 kg<br/>control: fanuc 10 tf <br/>turning length: 600 mm<br/>dimensions (l x w x h) approx.: 2000 x 1290 x 1610 mm<br/>description: - control: fanuc 10 tf<br> - turning length: 600 mm<br> - bar capacity: 51 mm<br> - tool places: 10<br> - increased drive power: 11/15 kw<br> <br> single-spindle cnc lathe nakamura-tome tmc -20lr<br> - bar loader: stenzel turbostar ml-51<br> - chip conveyor: knoll<br> <br> the machine comes with extensive accessories: clamping jaws, feed stops, clamp holders. WEIGHT APPROX.: 2500 KG
CONTROL: FANUC 10 TF
TURNING LENGTH: 600 MM
DIMENSIONS (L X W X H) APPROX.: 2000 X 1290 X 1610 MM
DESCRIPTION: - CONTROL: FANUC 10 TF
- TURNING LENGTH: 600 MM
- BAR CAPACITY: 51 MM
- TOOL PLACES: 10
- INCREASED DRIVE POWER: 11/15 KW

SINGLE-SPINDLE CNC LATHE NAKAMURA-TOME TMC -20LR
- BAR LOADER: STENZEL TURBOSTAR ML-51
- CHIP CONVEYOR: KNOLL

THE MACHINE COMES WITH EXTENSIVE ACCESSORIES: CLAMPING JAWS, FEED STOPS, CLAMP HOLDERS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-traverse path x 550 mm
y stroke 410 mm
z stroke 450 mm
b-axis travel + 110 â° to â?? 110 â° degree
c-axis travel 360âº
pallet size 2 x ã? 130 mm
rapid traverse x-y-z 50 m / min.
spindle carrier bt 40 big + spindle speed 15,000 rpm.
15 kw
tool magazine 40 stations
		

equipment: ï?? 2 x pallet changer
ï?? 4 additional pallets
ï?? external cooling 1,4 bar / 1000 l / min.
ï?? direct measuring system (heidenhain)
ï?? knoll coolant system tg 1000 up to 70 bar, 3 levels
ï?? 2 spiral chip conveyors
ï?? 8 free m functions of ï?? cutting force monitoring
ï?? rotating viewing window, electrically ï?? weekly timer with warm-up cycle
 TRAVERSE PATH X 550 MM Y STROKE 410 MM Z STROKE 450 MM B-AXIS TRAVEL + 110 &ACIRC;&DEG; TO &ACIRC;?? 110 &ACIRC;&DEG; DEGREE C-AXIS TRAVEL 360&ACIRC;&ORDM; PALLET SIZE 2 X &ATILDE;? 130 MM RAPID TRAVERSE X-Y-Z 50 M / MIN. SPINDLE CARRIER BT 40 BIG + SPINDLE SPEED 15,000 RPM. 15 KW TOOL MAGAZINE 40 STATIONS EQUIPMENT: &IUML;?? 2 X PALLET CHANGER &IUML;?? 4 ADDITIONAL PALLETS &IUML;?? EXTERNAL COOLING 1,4 BAR / 1000 L / MIN. &IUML;?? DIRECT MEASURING SYSTEM (HEIDENHAIN) &IUML;?? KNOLL COOLANT SYSTEM TG 1000 UP TO 70 BAR, 3 LEVELS &IUML;?? 2 SPIRAL CHIP CONVEYORS &IUML;?? 8 FREE M FUNCTIONS OF &IUML;?? CUTTING FORCE MONITORING &IUML;?? ROTATING VIEWING WINDOW, ELECTRICALLY &IUML;?? WEEKLY TIMER WITH WARM-UP CYCLE
Vendedor: Gross Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 56.900 €
Ubicación: Land-weight approx.: 18000 kg<br/>dimensions (l x w x h) approx.: 7000 x 2700 x 2600 mm<br/>description: - machine no.: 650033<br> - turning length of x/z: 1250 mm<br> - with y- and c-axis<br> - disc turret with 12 driven tool stations<br> - nominal voltage: 400 v<br> - control voltage: 24 v<br> - nominal current: 140 a<br> - nominal power: 80 kw<br> - main spindle d102, size: 11 - din 55026/55021 and iso 702/1<br> - workpiece passage: max. 102 mm<br> - speed: max. 3000 rpm<br> - diameter at front bearing: 170 mm<br> - power at main spindle 100/40% dc: 53/68 kw<br> - torque value: 675/900 nm<br> - ball screw spindle diameter: 40 mm<br> - working travel: 220 mm<br> - rapid traverse: 12 m/min<br> - feed force: 24000 n<br> - workpiece passage: 102 mm<br> - stroke: 48 mm<br> - clamping force max. tension: 10900 dn, pressure: 12000 dn<br> multifunction unit:<br> - speed max.: 6000/1500 rpm<br> - tools: hsk a63<br> - diameter at front bearing: 75 mm<br> - internal coolant supply<br> - tool driving device with two couplings ffor turret tools<br> - speed: max. 6000 rpm<br> - power at n= 300: 8,5 kw<br> - torque value: 34 nm<br> tailstock slide:<br> - ball screw spindle diameter: 50 mm<br> - distance between centres: 1300 mm<br> - working travel: 1250 mm<br> - rapid traverse: 10 m/min<br> - pressing force: 15000 n<br> - tailstock quill: sk 40<br> - bearing diameter: 65 mm<br> - workpiece weight: 500 kg<br> - machine is equipped with a tailstock, one steady rest as well as one three-jaw chuck and chip conveyor nord, type: sk 71l/4 and a paper belt filter unit knoll, type: ae 1050<br> - with complete documentation<br> - with siemens sinumerik 840 d cnc control system<br> - included in delivery is a big lot of machine accessories, consisting of many jaws, tool holders, lathe tools and more.<br> - attention: technical data without any warranty<br> - attention: axle locks and lifting beam must be returned after delivery of the machine!<br> - the machine has to be picked up on 13th or WEIGHT APPROX.: 18000 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 2700 X 2600 MM
DESCRIPTION: - MACHINE NO.: 650033
- TURNING LENGTH OF X/Z: 1250 MM
- WITH Y- AND C-AXIS
- DISC TURRET WITH 12 DRIVEN TOOL STATIONS
- NOMINAL VOLTAGE: 400 V
- CONTROL VOLTAGE: 24 V
- NOMINAL CURRENT: 140 A
- NOMINAL POWER: 80 KW
- MAIN SPINDLE D102, SIZE: 11 - DIN 55026/55021 AND ISO 702/1
- WORKPIECE PASSAGE: MAX. 102 MM
- SPEED: MAX. 3000 RPM
- DIAMETER AT FRONT BEARING: 170 MM
- POWER AT MAIN SPINDLE 100/40% DC: 53/68 KW
- TORQUE VALUE: 675/900 NM
- BALL SCREW SPINDLE DIAMETER: 40 MM
- WORKING TRAVEL: 220 MM
- RAPID TRAVERSE: 12 M/MIN
- FEED FORCE: 24000 N
- WORKPIECE PASSAGE: 102 MM
- STROKE: 48 MM
- CLAMPING FORCE MAX. TENSION: 10900 DN, PRESSURE: 12000 DN
MULTIFUNCTION UNIT:
- SPEED MAX.: 6000/1500 RPM
- TOOLS: HSK A63
- DIAMETER AT FRONT BEARING: 75 MM
- INTERNAL COOLANT SUPPLY
- TOOL DRIVING DEVICE WITH TWO COUPLINGS FFOR TURRET TOOLS
- SPEED: MAX. 6000 RPM
- POWER AT N= 300: 8,5 KW
- TORQUE VALUE: 34 NM
TAILSTOCK SLIDE:
- BALL SCREW SPINDLE DIAMETER: 50 MM
- DISTANCE BETWEEN CENTRES: 1300 MM
- WORKING TRAVEL: 1250 MM
- RAPID TRAVERSE: 10 M/MIN
- PRESSING FORCE: 15000 N
- TAILSTOCK QUILL: SK 40
- BEARING DIAMETER: 65 MM
- WORKPIECE WEIGHT: 500 KG
- MACHINE IS EQUIPPED WITH A TAILSTOCK, ONE STEADY REST AS WELL AS ONE THREE-JAW CHUCK AND CHIP CONVEYOR NORD, TYPE: SK 71L/4 AND A PAPER BELT FILTER UNIT KNOLL, TYPE: AE 1050
- WITH COMPLETE DOCUMENTATION
- WITH SIEMENS SINUMERIK 840 D CNC CONTROL SYSTEM
- INCLUDED IN DELIVERY IS A BIG LOT OF MACHINE ACCESSORIES, CONSISTING OF MANY JAWS, TOOL HOLDERS, LATHE TOOLS AND MORE.
- ATTENTION: TECHNICAL DATA WITHOUT ANY WARRANTY
- ATTENTION: AXLE LOCKS AND LIFTING BEAM MUST BE RETURNED AFTER DELIVERY OF THE MACHINE!
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-central coolant system knoll.
with automatic filling and coolant-% mixing system

  CENTRAL COOLANT SYSTEM KNOLL. WITH AUTOMATIC FILLING AND COOLANT-% MIXING SYSTEM
Vendedor: Tegeno
Año de construcción: usado
Ubicación: Land-faceplate diameter: 1400 mm<br/>swing diameter: 1600 mm<br/>turning height: 1000 mm<br/>control: siemens 840 c <br/>cross rail - adjustment: 1000 mm<br/>: 1300 <br/>table rpm: 315 u/min.<br/>workpiece weight: 15000 kg<br/>feed range: 0,1 - 2.000 mm/min<br/>rapid traverse: 6000 mm/min<br/>spindle motor: 40/56 kw kw<br/>connected load: ca. 75 kva<br/>weight of the machine ca.: 40 t<br/>accessories:<br/>- 4 - nos. clamping vices<br/>- div. tool holder and cutting tools capto<br/>- chip conveyor<br/>- knoll coolant device<br/>- documentation<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 1400 MM
SWING DIAMETER: 1600 MM
TURNING HEIGHT: 1000 MM
CONTROL: SIEMENS 840 C
CROSS RAIL - ADJUSTMENT: 1000 MM
: 1300
TABLE RPM: 315 U/MIN.
WORKPIECE WEIGHT: 15000 KG
FEED RANGE: 0,1 - 2.000 MM/MIN
RAPID TRAVERSE: 6000 MM/MIN
SPINDLE MOTOR: 40/56 KW KW
CONNECTED LOAD: CA. 75 KVA
WEIGHT OF THE MACHINE CA.: 40 T
ACCESSORIES:
- 4 - NOS. CLAMPING VICES
- DIV. TOOL HOLDER AND CUTTING TOOLS CAPTO
- CHIP CONVEYOR
- KNOLL COOLANT DEVICE
- DOCUMENTATION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Precio: 700 €
Ubicación: Land-knoll pump kts-32-48 t screw pump neuwerig from stock, rust   KNOLL PUMP KTS-32-48 T SCREW PUMP NEUWERIG FROM STOCK, RUST
Vendedor: Krail GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 2000 x 1600 x 1400 mm<br/>description: coolant cleaning system se 450, yom 1988 WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 1600 X 1400 MM
DESCRIPTION: COOLANT CLEANING SYSTEM SE 450, YOM 1988
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-clamping fixture main and sub spindle 
double foot switch with protection cover for main and sub spindle 
tool holder capto c5 for rotary milling spindle 
chain tool magazine with 40 spots 
increase the possible indexing b-axis to 0,0001° 
i/f for high pressure coolant system 70 bar 
compressed air exhaust system for chuck (hs) and tool cutting (turning-milling spindle) 
chip conveyor 
part catcher
part conveyor belt 
agw revolver 2 
bar loader interface 
tapping without compensating chuck 
transformer 
knoll high pressure system  CLAMPING FIXTURE MAIN AND SUB SPINDLE DOUBLE FOOT SWITCH WITH PROTECTION COVER FOR MAIN AND SUB SPINDLE TOOL HOLDER CAPTO C5 FOR ROTARY MILLING SPINDLE CHAIN TOOL MAGAZINE WITH 40 SPOTS INCREASE THE POSSIBLE INDEXING B-AXIS TO 0,0001° I/F FOR HIGH PRESSURE COOLANT SYSTEM 70 BAR COMPRESSED AIR EXHAUST SYSTEM FOR CHUCK (HS) AND TOOL CUTTING (TURNING-MILLING SPINDLE) CHIP CONVEYOR PART CATCHER PART CONVEYOR BELT AGW REVOLVER 2 BAR LOADER INTERFACE TAPPING WITHOUT COMPENSATING CHUCK TRANSFORMER KNOLL HIGH PRESSURE SYSTEM
Vendedor: Andreas Zobel Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 2100 x 1000 x 1300 mm<br/>description: coolant cleaning system with chip conveyor WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 1000 X 1300 MM
DESCRIPTION: COOLANT CLEANING SYSTEM WITH CHIP CONVEYOR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-spindle unit with tool holder bt40 
tool magazine with 61 spots
workpiece measurement renishaw taster 
direct measuring system in the x -, y - and z-axis 
chip conveyor
i/f for coolant system and knoll 
load monitoring function 
knoll high-pressure system 
documentation (if applicable)  SPINDLE UNIT WITH TOOL HOLDER BT40 TOOL MAGAZINE WITH 61 SPOTS WORKPIECE MEASUREMENT RENISHAW TASTER DIRECT MEASURING SYSTEM IN THE X -, Y - AND Z-AXIS CHIP CONVEYOR I/F FOR COOLANT SYSTEM AND KNOLL LOAD MONITORING FUNCTION KNOLL HIGH-PRESSURE SYSTEM DOCUMENTATION (IF APPLICABLE)
Vendedor: Andreas Zobel Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 550 kg<br/>dimensions (l x w x h) approx.: 3000 x 1600 x 1250 mm<br/>description: serial number 2904875/01, including cooling water preparation system WEIGHT APPROX.: 550 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 1600 X 1250 MM
DESCRIPTION: SERIAL NUMBER 2904875/01, INCLUDING COOLING WATER PREPARATION SYSTEM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 27.000 €
Ubicación: Land-engine details

stock number 1105-02533 machine type machining center - vertical make chiron type fz 08 kw built in 2004 control type cnc storage france country of origin germany delivery immediately cargo base stock haguenau france technical details

x trail 450 mm y way 270 mm z-way 310 mm table size 660 350 x 2 mm spindle retainer hsk-a 40 speed range 20-15000 rpm speed - longitudinal/transverse/vertical 75 m / min distance spindle/table 170-420 mm number of tool magazine 24 tool diameter max . 63 mm tool length of max 160 mm tool weight of 2 kg total power of 17 kw additional information

control siemens 840 d wechselteiltisch 2 x 660 x 350 x 180 â°
 spindle 15000 rpm
 24 compartment tool changer
 ikz high pressure of 70 bars by knoll pump
 direct position measuring system
 spindle kuhler
 spaenefoerderer ENGINE DETAILS STOCK NUMBER 1105-02533 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE CHIRON TYPE FZ 08 KW BUILT IN 2004 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS X TRAIL 450 MM Y WAY 270 MM Z-WAY 310 MM TABLE SIZE 660 350 X 2 MM SPINDLE RETAINER HSK-A 40 SPEED RANGE 20-15000 RPM SPEED - LONGITUDINAL/TRANSVERSE/VERTICAL 75 M / MIN DISTANCE SPINDLE/TABLE 170-420 MM NUMBER OF TOOL MAGAZINE 24 TOOL DIAMETER MAX . 63 MM TOOL LENGTH OF MAX 160 MM TOOL WEIGHT OF 2 KG TOTAL POWER OF 17 KW ADDITIONAL INFORMATION CONTROL SIEMENS 840 D WECHSELTEILTISCH 2 X 660 X 350 X 180 &ACIRC;&DEG; SPINDLE 15000 RPM 24 COMPARTMENT TOOL CHANGER IKZ HIGH PRESSURE OF 70 BARS BY KNOLL PUMP DIRECT POSITION MEASURING SYSTEM SPINDLE KUHLER SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-workpiece length: 900 mm<br/>swing dia.: 180 mm<br/>clamping length: 900 mm<br/>workpiece diameter: 20 - 90 mm<br/>swing diameter: 180 mm<br/>control: fanuc 160-t model c <br/>c-axis: 180 °<br/>b-axis: 60 °<br/>z-axis: 1000 mm<br/>spindle speeds: 6000 u/min<br/>grinding spindle drive: 24 kw<br/>grinding spindle speed: 6000 u/min<br/>grinding wheel size: 400 x 127 mm<br/>total power requirement: 90 kw<br/>weight of the machine ca.: 16 t<br/>dimensions of the machine ca.:  m<br/>external grinding machine for external rounding & surface grinding of <br/>crankshafts (main bearing, flange and pin) with cbn grinding wheels and with a <br/>loading system from felsomat. equipped with:<br/>- cnc control fanuc 160-t model c<br/>- chuck, tailstock, power output device<br/>- marposs balancer e78<br/>- dittel m 5000<br/>- marposs p 5 measuring instrument for diameter<br/>- measuring probe for length dimensions<br/>- spindle with c-axis by 180 ° tiltable and rotatable about b-axis 60°<br/>- two arobotec lunettes (dia. 20-90mm)<br/>- oil mist extraction system lta<br/>- cooling unit by bkw<br/>- bosch hydraulic power pack<br/>- knoll pumps unit for connection to central coolant system<br/>- fire extinguisher and pressure relief valve<br/><br/>technical data of the felsomat filler of system:<br/>? year of construction 2009<br/>? basket loading with stacking cell<br/>? spc drawer<br/>? gantry loader with grapple<br/>? 90 ° corner converter<br/>? siemens 840 d control<br/>? system is fully functional<br/><br/><br/><br/><br/> WORKPIECE LENGTH: 900 MM
SWING DIA.: 180 MM
CLAMPING LENGTH: 900 MM
WORKPIECE DIAMETER: 20 - 90 MM
SWING DIAMETER: 180 MM
CONTROL: FANUC 160-T MODEL C
C-AXIS: 180 °
B-AXIS: 60 °
Z-AXIS: 1000 MM
SPINDLE SPEEDS: 6000 U/MIN
GRINDING SPINDLE DRIVE: 24 KW
GRINDING SPINDLE SPEED: 6000 U/MIN
GRINDING WHEEL SIZE: 400 X 127 MM
TOTAL POWER REQUIREMENT: 90 KW
WEIGHT OF THE MACHINE CA.: 16 T
DIMENSIONS OF THE MACHINE CA.: M
EXTERNAL GRINDING MACHINE FOR EXTERNAL ROUNDING & SURFACE GRINDING OF
CRANKSHAFTS (MAIN BEARING, FLANGE AND PIN) WITH CBN GRINDING WHEELS AND WITH A
LOADING SYSTEM FROM FELSOMAT. EQUIPPED WITH:
- CNC CONTROL FANUC 160-T MODEL C
- CHUCK, TAILSTOCK, POWER OUTPUT DEVICE
- MARPOSS BALANCER E78
- DITTEL M 5000
- MARPOSS P 5 MEASURING INSTRUMENT FOR DIAMETER
- MEASURING PROBE FOR LENGTH DIMENSIONS
- SPINDLE WITH C-AXIS BY 180 ° TILTABLE AND ROTATABLE ABOUT B-AXIS 60°
- TWO AROBOTEC LUNETTES (DIA. 20-90MM)
- OIL MIST EXTRACTION SYSTEM LTA
- COOLING UNIT BY BKW
- BOSCH HYDRAULIC POWER PACK
- KNOLL PUMPS UNIT FOR CONNECTION TO CENTRAL COOLANT SYSTEM
- FIRE EXTINGUISHER AND PRESSURE RELIEF VALVE

TECHNICAL DATA OF THE FELSOMAT FILLER OF SYSTEM:
? YEAR OF CONSTRUCTION 2009
? BASKET LOADING WITH STACKING CELL
? SPC DRAWER
? GANTRY LOADER WITH GRAPPLE
? 90 ° CORNER CONVERTER
? SIEMENS 840 D CONTROL
? SYSTEM IS FULLY FUNCTIONAL




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land- complete system with everything for the installation and operation see required accessories below!
traverse paths x 7000 y = z = 1600 w = 800 / quill stroke = 600 mm
overhaul 2007, origin year 1991: new control system siemens sinumerik 840 d, new engines, tracks new cabinets worked on. ecocut 1 was then operated only a few months *.
feed speed 12000 mm / min / / w-axis 6000 mm / min
turntable tdv 2 maximum workpiece weight 6 t / size 1000 x 1000
turntable tdv 3 maximum workpiece weight 12t / clamping surface 1250 x 1600
accessories: 2 new angle milling cutters / chain tool change system / plates / complete enclosure / knoll chip conveyor / exhaust / cooling plant with belt filter
all bwf fixators for positioning machine bed and plate field COMPLETE SYSTEM WITH EVERYTHING FOR THE INSTALLATION AND OPERATION SEE REQUIRED ACCESSORIES BELOW! TRAVERSE PATHS X 7000 Y = Z = 1600 W = 800 / QUILL STROKE = 600 MM OVERHAUL 2007, ORIGIN YEAR 1991: NEW CONTROL SYSTEM SIEMENS SINUMERIK 840 D, NEW ENGINES, TRACKS NEW CABINETS WORKED ON. ECOCUT 1 WAS THEN OPERATED ONLY A FEW MONTHS *. FEED SPEED 12000 MM / MIN / / W-AXIS 6000 MM / MIN TURNTABLE TDV 2 MAXIMUM WORKPIECE WEIGHT 6 T / SIZE 1000 X 1000 TURNTABLE TDV 3 MAXIMUM WORKPIECE WEIGHT 12T / CLAMPING SURFACE 1250 X 1600 ACCESSORIES: 2 NEW ANGLE MILLING CUTTERS / CHAIN TOOL CHANGE SYSTEM / PLATES / COMPLETE ENCLOSURE / KNOLL CHIP CONVEYOR / EXHAUST / COOLING PLANT WITH BELT FILTER ALL BWF FIXATORS FOR POSITIONING MACHINE BED AND PLATE FIELD
Vendedor: Schweizer Service
Año de construcción: usado
Ubicación: Land-liter capacity:  l<br/>used knoll filtration system for grinding machines<br/><br/>very good condition, dismantled and stored.<br/>peridoc maintanance by knoll.<br/><br/>machine has magnetic seperator.<br/><br/>data:<br/>material: steel<br/>cooling lubricant: emulsion<br/>machining process: roughing and finishing<br/>type of chips: grinding sludge 2.5 l/min<br/>volume flow max.: 300 l/min<br/>fleece width: 710 mm<br/><br/><br/><br/><br/> LITER CAPACITY: L
USED KNOLL FILTRATION SYSTEM FOR GRINDING MACHINES

VERY GOOD CONDITION, DISMANTLED AND STORED.
PERIDOC MAINTANANCE BY KNOLL.

MACHINE HAS MAGNETIC SEPERATOR.

DATA:
MATERIAL: STEEL
COOLING LUBRICANT: EMULSION
MACHINING PROCESS: ROUGHING AND FINISHING
TYPE OF CHIPS: GRINDING SLUDGE 2.5 L/MIN
VOLUME FLOW MAX.: 300 L/MIN
FLEECE WIDTH: 710 MM




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-14'588 spindle hours (counter cabinet)
approx. 4'000 hours of program course (nc-a panel)

vintage: 04.2007 / commissioning: 05.2008

control: matsuura g-tech - 32i (fanuc)
traverse path x / y / z: 520 / 730 / 510 mm
spindle speed: 45 15'000 rpm
toolholder: bt 40
tool changers: 120 seats

machine dimensions w x d x h: ca. 4300 x 7000 x 3100 mm (footprint)
weight: ca. 15'000 kg

table:
-pallet size: 300 x 300 mm
-maximum load: 200 kg
-maximum workpiece size ã? x h 520 mm x 350 mm

tool:
-maximum diameter: ã?96 mm / ã?150 mm
-maximum length: 300 mm
-maximum weight: 10 kg
-tool change time: 1.1 sec

process areas:
a-axis: + 110â° ~ - 110â°
b-axis: 360â°

feeds:
x-axis: 50 / 50 m / min
y-axis: 50 / 50 m / min
z-axis: 50 / 50 m / min
a-axis: 30 min-1
c-axis: 50 min-1

special accessories of the machine:

extension of the tool magazine of standard 30 to 120 tool locations, including preparation for 240 tool places

pallet changer with 2 pallets

hsc spindle of 40 - 15'000 rpm with big-plus recording, motor: 18,5 kw, max torque: 108 nm / 1320 min-1

direct measuring system (heidenhain) for x, y, and z axes

knoll high performance radiator:
-scraper conveyor or schanierbandspã¤nefã¶rderer lifting pump with chip removal to the operating side
-coolant through the spindle with coolant pump kts25-50 tons and 17 l/min at 70 bar, 5.5 kw, coolant pressure in 3 steps selectable
-external cooling with coolant pump, capacity 100 l/min at 1.4 bar
-coolant shower with coolant pump, capacity 270 l/min at 2.3 bar
-hydrostatfilte hl-450, filter capacity 450 l/min, dimension of the total unit l x w x h approx. 2.4 x 1.7 x 2.3 m, tank capacity approx. 1,100 litres

measuring probe renishaw omp 60 for the automatic zero setting and measuring of workpieces, the tool changer in the interchangeable spindle. including easy trial software, pressure gauge for tool length measurement and tool breakage detection

8 free m functions
rotating viewing window

optional accessories for the control:

cutting force monitoring

boost the workpiece coordinate system from 6 to 54

corner chamfer and round

automatic zero point carrying

expansion of the macro variables on 100-199, 500-999

iz2/150nf hsc precision control for simultaneous 5-axis machining, consisting of:
-fast data server function
high speed precision contour control
-nano smoothing
-dynamic zero carrying, there are up to 8 different zero points to carry available
-tcpc tool center control for 5-axis simultaneous milling
-swing cycle allows you to edit on an inclined working plane

errors of technical data and intermediate sales reserved! 14'588 SPINDLE HOURS (COUNTER CABINET) APPROX. 4'000 HOURS OF PROGRAM COURSE (NC-A PANEL) VINTAGE: 04.2007 / COMMISSIONING: 05.2008 CONTROL: MATSUURA G-TECH - 32I (FANUC) TRAVERSE PATH X / Y / Z: 520 / 730 / 510 MM SPINDLE SPEED: 45 15'000 RPM TOOLHOLDER: BT 40 TOOL CHANGERS: 120 SEATS MACHINE DIMENSIONS W X D X H: CA. 4300 X 7000 X 3100 MM (FOOTPRINT) WEIGHT: CA. 15'000 KG TABLE: -PALLET SIZE: 300 X 300 MM -MAXIMUM LOAD: 200 KG -MAXIMUM WORKPIECE SIZE &ATILDE;? X H 520 MM X 350 MM TOOL: -MAXIMUM DIAMETER: &ATILDE;?96 MM / &ATILDE;?150 MM -MAXIMUM LENGTH: 300 MM -MAXIMUM WEIGHT: 10 KG -TOOL CHANGE TIME: 1.1 SEC PROCESS AREAS: A-AXIS: + 110&ACIRC;&DEG; ~ - 110&ACIRC;&DEG; B-AXIS: 360&ACIRC;&DEG; FEEDS: X-AXIS: 50 / 50 M / MIN Y-AXIS: 50 / 50 M / MIN Z-AXIS: 50 / 50 M / MIN A-AXIS: 30 MIN-1 C-AXIS: 50 MIN-1 SPECIAL ACCESSORIES OF THE MACHINE: EXTENSION OF THE TOOL MAGAZINE OF STANDARD 30 TO 120 TOOL LOCATIONS, INCLUDING PREPARATION FOR 240 TOOL PLACES PALLET CHANGER WITH 2 PALLETS HSC SPINDLE OF 40 - 15'000 RPM WITH BIG-PLUS RECORDING, MOTOR: 18,5 KW, MAX TORQUE: 108 NM / 1320 MIN-1 DIRECT MEASURING SYSTEM (HEIDENHAIN) FOR X, Y, AND Z AXES KNOLL HIGH PERFORMANCE RADIATOR: -SCRAPER CONVEYOR OR SCHANIERBANDSP&ATILDE;&CURREN;NEF&ATILDE;&PARA;RDERER LIFTING PUMP WITH CHIP REMOVAL TO THE OPERATING SIDE -COOLANT THROUGH THE SPINDLE WITH COOLANT PUMP KTS25-50 TONS AND 17 L/MIN AT 70 BAR, 5.5 KW, COOLANT PRESSURE IN 3 STEPS SELECTABLE -EXTERNAL COOLING WITH COOLANT PUMP, CAPACITY 100 L/MIN AT 1.4 BAR -COOLANT SHOWER WITH COOLANT PUMP, CAPACITY 270 L/MIN AT 2.3 BAR -HYDROSTATFILTE HL-450, FILTER CAPACITY 450 L/MIN, DIMENSION OF THE TOTAL UNIT L X W X H APPROX. 2.4 X 1.7 X 2.3 M, TANK CAPACITY APPROX. 1,100 LITRES MEASURING PROBE RENISHAW OMP 60 FOR THE AUTOMATIC ZERO SETTING AND MEASURING OF WORKPIECES, THE TOOL CHANGER IN THE INTERCHANGEABLE SPINDLE. INCLUDING EASY TRIAL SOFTWARE, PRESSURE GAUGE FOR TOOL LENGTH MEASUREMENT AND TOOL BREAKAGE DETECTION 8 FREE M FUNCTIONS ROTATING VIEWING WINDOW OPTIONAL ACCESSORIES FOR THE CONTROL: CUTTING FORCE MONITORING BOOST THE WORKPIECE COORDINATE SYSTEM FROM 6 TO 54 CORNER CHAMFER AND ROUND AUTOMATIC ZERO POINT CARRYING EXPANSION OF THE MACRO VARIABLES ON 100-199, 500-999 IZ2/150NF HSC PRECISION CONTROL FOR SIMULTANEOUS 5-AXIS MACHINING, CONSISTING OF: -FAST DATA SERVER FUNCTION HIGH SPEED PRECISION CONTOUR CONTROL -NANO SMOOTHING -DYNAMIC ZERO CARRYING, THERE ARE UP TO 8 DIFFERENT ZERO POINTS TO CARRY AVAILABLE -TCPC TOOL CENTER CONTROL FOR 5-AXIS SIMULTANEOUS MILLING -SWING CYCLE ALLOWS YOU TO EDIT ON AN INCLINED WORKING PLANE ERRORS OF TECHNICAL DATA AND INTERMEDIATE SALES RESERVED!
Vendedor: Müller-Maschinen AG
Año de construcción: usado
Ubicación: Land-number of spindles: 9 <br/>spindle passage: 26 mm<br/>turning length: 26 mm<br/>control: siemens 840 d <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>workpiece:<br/>- max. clamping diam. 26 mm<br/>- 9 main spindles:<br/>- spindle 1 to 6: rated torque 18,5 nm<br/>- max. torque 50 nm<br/>- max. speed 7,000 rpm<br/>- spindles 7 to 9: rated torque 15 nm<br/>- max. torque 30 nm<br/>- max. speed 10,000 rpm<br/>travels (cross slide):<br/>- x (spindles 1 to 6): 70 mm<br/>- x (spindles 8 to 9): 110 mm<br/>- z: 125 mm<br/>- feeds: 30 m/min<br/>- feed power: 3kn<br/>travels (longitudinal slide): - x: 16 mm<br/>- z: 300 mm<br/>- feed power 3kn<br/>- feeds: 30 m/min<br/><br/>-cnc siemens 840 d<br/>- swarf conveyor and chiller 21,1 kw<br/>- knoll chiller<br/>- with pietro cucchi compact bar feeder 26 mm (rounded), 19 mm (squared), 22 mm <br/>(hexagonal)<br/><br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 9
SPINDLE PASSAGE: 26 MM
TURNING LENGTH: 26 MM
CONTROL: SIEMENS 840 D
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
WORKPIECE:
- MAX. CLAMPING DIAM. 26 MM
- 9 MAIN SPINDLES:
- SPINDLE 1 TO 6: RATED TORQUE 18,5 NM
- MAX. TORQUE 50 NM
- MAX. SPEED 7,000 RPM
- SPINDLES 7 TO 9: RATED TORQUE 15 NM
- MAX. TORQUE 30 NM
- MAX. SPEED 10,000 RPM
TRAVELS (CROSS SLIDE):
- X (SPINDLES 1 TO 6): 70 MM
- X (SPINDLES 8 TO 9): 110 MM
- Z: 125 MM
- FEEDS: 30 M/MIN
- FEED POWER: 3KN
TRAVELS (LONGITUDINAL SLIDE): - X: 16 MM
- Z: 300 MM
- FEED POWER 3KN
- FEEDS: 30 M/MIN

-CNC SIEMENS 840 D
- SWARF CONVEYOR AND CHILLER 21,1 KW
- KNOLL CHILLER
- WITH PIETRO CUCCHI COMPACT BAR FEEDER 26 MM (ROUNDED), 19 MM (SQUARED), 22 MM
(HEXAGONAL)





Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-no. 4648: 

1 used coolant reservoir with paper band filter
      and high pressure pump (approx. 40 bar)
make knoll / allweiler (stama), type kts - 25-50-t
new in 1994 with stainless steel tank approx. 600 l
work range: filtervliebreite approx. 700 mm
power: 5.5 kw

accessories: 
engine knoll
allweiler filters pf 100 cvs (bj. 1991)

other: 
stainless steel tank approx. 1570 x 800 x 500 mm
overall - dimensions 1800 x 850 x 1200 mm
weight 200 kg (estimated)

 NO. 4648: 1 USED COOLANT RESERVOIR WITH PAPER BAND FILTER AND HIGH PRESSURE PUMP (APPROX. 40 BAR) MAKE KNOLL / ALLWEILER (STAMA), TYPE KTS - 25-50-T NEW IN 1994 WITH STAINLESS STEEL TANK APPROX. 600 L WORK RANGE: FILTERVLIEBREITE APPROX. 700 MM POWER: 5.5 KW ACCESSORIES: ENGINE KNOLL ALLWEILER FILTERS PF 100 CVS (BJ. 1991) OTHER: STAINLESS STEEL TANK APPROX. 1570 X 800 X 500 MM OVERALL - DIMENSIONS 1800 X 850 X 1200 MM WEIGHT 200 KG (ESTIMATED)
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-turning diameter: 660 mm<br/>turning length: 1045 mm<br/>control: mazatrol pc fusion 640mt <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>mazatrol pc fusion 640 mt<br/>milling spindle above for turning and milling tools (b-axis)<br/>2x c-axis<br/>y-axis<br/>120-fold magazine (tool taper capto c6)<br/>main spindle: 3-jaw chuck schunk / hainbuch collet chuck device<br/>sub spindle: 3-jaw chuck schunk / hainbuch collet chuck device<br/>software for hobbing<br/>option package 5 axes simultan working<br/>knoll high pressure coolant device 70bar<br/>irco short bar loading device<br/><br/>technische daten / technical details:<br/>umlaufdurchmesser über bett / rotary diameter over bed    660    mm<br/>umlaufdurchmesser über schlitten / rotary diameter over sledge    660    mm<br/>max. drehdurchmesser / max. turning diameter    660    mm<br/>max. durchmesser bei stangenarbeiten / max. diameter at bar working    65    mm<br/>verfahrweg x-achse / travel x-axis    580    mm<br/>verfahrweg z-achse / travel z-axis    1045    mm<br/>verfahrweg y-achse / travel y-axis    +-80    mm<br/>verfahrweg w-achse / travel w-axis    1050    mm<br/>schwenkbereich b-achse / swivel range b-axis    -30 / +195    °<br/>drehzahlbereich / spindle speed range    35-5000    upm / rpm<br/>werkzeugaufnahme frässpindel / tool taper milling spindle    capto c6    <br/>drehzahlbereich frässpindel /speed of milling spindle    15-12000    upm / rpm<br/>anzahl der magazinplätze / number of places in magazine    120    fach /fold<br/>eilgang x,y,z / rapid feed x,y,z    38/26/38    m/min<br/>antriebsleistung haupt-/ gegenspindel 30%ed / drive capacity main spindle / sub <br/>spindle 30%ed    22/18,5    kw<br/>gewicht der maschine / weight    9700    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 660 MM
TURNING LENGTH: 1045 MM
CONTROL: MAZATROL PC FUSION 640MT
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
MAZATROL PC FUSION 640 MT
MILLING SPINDLE ABOVE FOR TURNING AND MILLING TOOLS (B-AXIS)
2X C-AXIS
Y-AXIS
120-FOLD MAGAZINE (TOOL TAPER CAPTO C6)
MAIN SPINDLE: 3-JAW CHUCK SCHUNK / HAINBUCH COLLET CHUCK DEVICE
SUB SPINDLE: 3-JAW CHUCK SCHUNK / HAINBUCH COLLET CHUCK DEVICE
SOFTWARE FOR HOBBING
OPTION PACKAGE 5 AXES SIMULTAN WORKING
KNOLL HIGH PRESSURE COOLANT DEVICE 70BAR
IRCO SHORT BAR LOADING DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
UMLAUFDURCHMESSER üBER BETT / ROTARY DIAMETER OVER BED 660 MM
UMLAUFDURCHMESSER üBER SCHLITTEN / ROTARY DIAMETER OVER SLEDGE 660 MM
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 660 MM
MAX. DURCHMESSER BEI STANGENARBEITEN / MAX. DIAMETER AT BAR WORKING 65 MM
VERFAHRWEG X-ACHSE / TRAVEL X-AXIS 580 MM
VERFAHRWEG Z-ACHSE / TRAVEL Z-AXIS 1045 MM
VERFAHRWEG Y-ACHSE / TRAVEL Y-AXIS +-80 MM
VERFAHRWEG W-ACHSE / TRAVEL W-AXIS 1050 MM
SCHWENKBEREICH B-ACHSE / SWIVEL RANGE B-AXIS -30 / +195 °
DREHZAHLBEREICH / SPINDLE SPEED RANGE 35-5000 UPM / RPM
WERKZEUGAUFNAHME FRäSSPINDEL / TOOL TAPER MILLING SPINDLE CAPTO C6
DREHZAHLBEREICH FRäSSPINDEL /SPEED OF MILLING SPINDLE 15-12000 UPM / RPM
ANZAHL DER MAGAZINPLäTZE / NUMBER OF PLACES IN MAGAZINE 120 FACH /FOLD
EILGANG X,Y,Z / RAPID FEED X,Y,Z 38/26/38 M/MIN
ANTRIEBSLEISTUNG HAUPT-/ GEGENSPINDEL 30%ED / DRIVE CAPACITY MAIN SPINDLE / SUB
SPINDLE 30%ED 22/18,5 KW
GEWICHT DER MASCHINE / WEIGHT 9700 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-stock no. 4647

1 used chip conveyor
make knoll / (stama), type 240 k-1 (formerly stama mc 330)
new in 1994 with work range 1600 x 200 mm

 STOCK NO. 4647 1 USED CHIP CONVEYOR MAKE KNOLL / (STAMA), TYPE 240 K-1 (FORMERLY STAMA MC 330) NEW IN 1994 WITH WORK RANGE 1600 X 200 MM
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-x-travel: 2050 mm<br/>y-travel: 850 mm<br/>z-travel: 750 mm<br/>control: osp-p300m <br/>rapid traverse x/z/y: 16 m/min.<br/>max. table load: 3800 kg<br/>worktool system: sk50 <br/>table-size: 2200x850 mm<br/>spindle capacity: 18,5 kw<br/>spindle turning speed range: 12000 u/min<br/>internal coolant system feed: 70 bar<br/>tool changer: 120 positionen<br/>weight of the machine ca.: 15 t<br/>equipment/accessories:<br/>- measuring probe renishaw<br/>- broken tool control<br/>- automatic centering of tools<br/>- high-pressure pump knoll for internal coolant supply 40 bar<br/>- preparation for internal coolant supply 70 bar<br/>- chip conveyor<br/>- fume extraction<br/><br/><br/><br/><br/> X-TRAVEL: 2050 MM
Y-TRAVEL: 850 MM
Z-TRAVEL: 750 MM
CONTROL: OSP-P300M
RAPID TRAVERSE X/Z/Y: 16 M/MIN.
MAX. TABLE LOAD: 3800 KG
WORKTOOL SYSTEM: SK50
TABLE-SIZE: 2200X850 MM
SPINDLE CAPACITY: 18,5 KW
SPINDLE TURNING SPEED RANGE: 12000 U/MIN
INTERNAL COOLANT SYSTEM FEED: 70 BAR
TOOL CHANGER: 120 POSITIONEN
WEIGHT OF THE MACHINE CA.: 15 T
EQUIPMENT/ACCESSORIES:
- MEASURING PROBE RENISHAW
- BROKEN TOOL CONTROL
- AUTOMATIC CENTERING OF TOOLS
- HIGH-PRESSURE PUMP KNOLL FOR INTERNAL COOLANT SUPPLY 40 BAR
- PREPARATION FOR INTERNAL COOLANT SUPPLY 70 BAR
- CHIP CONVEYOR
- FUME EXTRACTION




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-toyoda fh630 sx horizontal center
machine is purchased until 2015 by show room and gone in use! control, siemens 840 d sl (3d simulation tool paths and progarmsimulation u...)
x 1000
y-800
z-850
spindle speed: 14,000 rpm
toolholder: bt 50
maximum workpiece weight: 1200 kg
tool changers: 60 position
full 4th axis indexed 0.001 degrees!
2 pallets 630 x 630
ikz, interior cooling 70 bar knoll
: weight 20600
warning machine we from ca. 1/2019 until free.
in the interest of privileges to purchase will be acquired by the machine! TOYODA FH630 SX HORIZONTAL CENTER MACHINE IS PURCHASED UNTIL 2015 BY SHOW ROOM AND GONE IN USE! CONTROL, SIEMENS 840 D SL (3D SIMULATION TOOL PATHS AND PROGARMSIMULATION U...) X 1000 Y-800 Z-850 SPINDLE SPEED: 14,000 RPM TOOLHOLDER: BT 50 MAXIMUM WORKPIECE WEIGHT: 1200 KG TOOL CHANGERS: 60 POSITION FULL 4TH AXIS INDEXED 0.001 DEGREES! 2 PALLETS 630 X 630 IKZ, INTERIOR COOLING 70 BAR KNOLL : WEIGHT 20600 WARNING MACHINE WE FROM CA. 1/2019 UNTIL FREE. IN THE INTEREST OF PRIVILEGES TO PURCHASE WILL BE ACQUIRED BY THE MACHINE!
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Ubicación: Land-number of spindles: 8 <br/>spindle passage: 20 mm<br/>turning length: 80-100 mm<br/>control: pnc-deco fanuc<br/>turning speeds: 5000 u/min<br/>sub-spindle: 20 mm<br/>load magazine: iemca pra 52/33p<br/>number of working hours:  h<br/>equipped with:<br/>- 23 axes, 8 spindle <br/>- chip shut<br/>switch-on hours: 39.000 h<br/>(with coolant device ae1058 knoll chip conveyor)<br/>serial-no: 1713<br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 8
SPINDLE PASSAGE: 20 MM
TURNING LENGTH: 80-100 MM
CONTROL: PNC-DECO FANUC
TURNING SPEEDS: 5000 U/MIN
SUB-SPINDLE: 20 MM
LOAD MAGAZINE: IEMCA PRA 52/33P
NUMBER OF WORKING HOURS: H
EQUIPPED WITH:
- 23 AXES, 8 SPINDLE
- CHIP SHUT
SWITCH-ON HOURS: 39.000 H
(WITH COOLANT DEVICE AE1058 KNOLL CHIP CONVEYOR)
SERIAL-NO: 1713




Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-shw ufz 6.5, uf6
construction year: 2013

travel x/y/z:14.000/ 2,600 / 1300 mm
nc rotary tables diameter: 2,500 mm
universal head
speed range: 22-5,000 rpm
tool holder sk 50 big +.

control heidenhain itnc 530 hsci
workpiece weight max: 20 to
tool changer 66 sites
bum probe
collision protection system b 100
chip conveyor knoll
2 angle: 1,000 mm x 2,500 mm

special feature: two driving stand machines can be operated synchronously, simultaneous 5 axis machining SHW UFZ 6.5, UF6 CONSTRUCTION YEAR: 2013 TRAVEL X/Y/Z:14.000/ 2,600 / 1300 MM NC ROTARY TABLES DIAMETER: 2,500 MM UNIVERSAL HEAD SPEED RANGE: 22-5,000 RPM TOOL HOLDER SK 50 BIG +. CONTROL HEIDENHAIN ITNC 530 HSCI WORKPIECE WEIGHT MAX: 20 TO TOOL CHANGER 66 SITES BUM PROBE COLLISION PROTECTION SYSTEM B 100 CHIP CONVEYOR KNOLL 2 ANGLE: 1,000 MM X 2,500 MM SPECIAL FEATURE: TWO DRIVING STAND MACHINES CAN BE OPERATED SYNCHRONOUSLY, SIMULTANEOUS 5 AXIS MACHINING
Vendedor: Maturus Finance GmbH
Año de construcción: usado
Ubicación: Land-travel -x axis:560 mm<br/>travel -y axis:510 mm<br/>travel -z axis:510 mm<br/>control:fanuc 18 mc <br/>size of pallet:400 x 400 mm<br/>numbers of pallets:2 <br/>table load:0,5 t<br/>working diameter:610 mm<br/>b-axis:0,001 °<br/>rapid travel x/y/z:32000 mm/min<br/>feeds x/y/z -stepless:16000 mm/min<br/>tool magazin::40 bt 40 <br/>tool changing time:1,5 sec<br/>max. tool diameter:80/125 mm<br/>max. tool weight:10 kg<br/>spindle speed::12000 1/min<br/>spindle drive:22 / 18,5 kw<br/>max. torque on the spindle:167 nm<br/>capacity:55 kva<br/>weight of the machine ca.:8,7 t<br/>overall size:2500 x 3900 x 2700 mm<br/>coolant through spindle 50 bar knoll vrf unit: <br/>chip conveyor: <br/><br/> TRAVEL -X AXIS:560 MM
TRAVEL -Y AXIS:510 MM
TRAVEL -Z AXIS:510 MM
CONTROL:FANUC 18 MC
SIZE OF PALLET:400 X 400 MM
NUMBERS OF PALLETS:2
TABLE LOAD:0,5 T
WORKING DIAMETER:610 MM
B-AXIS:0,001 °
RAPID TRAVEL X/Y/Z:32000 MM/MIN
FEEDS X/Y/Z -STEPLESS:16000 MM/MIN
TOOL MAGAZIN::40 BT 40
TOOL CHANGING TIME:1,5 SEC
MAX. TOOL DIAMETER:80/125 MM
MAX. TOOL WEIGHT:10 KG
SPINDLE SPEED::12000 1/MIN
SPINDLE DRIVE:22 / 18,5 KW
MAX. TORQUE ON THE SPINDLE:167 NM
CAPACITY:55 KVA
WEIGHT OF THE MACHINE CA.:8,7 T
OVERALL SIZE:2500 X 3900 X 2700 MM
COOLANT THROUGH SPINDLE 50 BAR KNOLL VRF UNIT:
CHIP CONVEYOR:

Vendedor: BTT Bosetti TechTransfer
Año de construcción: usado
Ubicación: Land-filter performance 3 x 300 l
at least 900 l / min.
power 83 kw
weight approx. 5 t
pump, oil cooler, spindle cooling, condensers for outdoor use.
filter system was tuned for 5 gear grinding machines. FILTER PERFORMANCE 3 X 300 L AT LEAST 900 L / MIN. POWER 83 KW WEIGHT APPROX. 5 T PUMP, OIL COOLER, SPINDLE COOLING, CONDENSERS FOR OUTDOOR USE. FILTER SYSTEM WAS TUNED FOR 5 GEAR GRINDING MACHINES.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1020 mm<br/>y-travel: 510 mm<br/>z-travel: 460 mm<br/>control: matrix nexus <br/>tool taper: hsk 63 <br/>turning speeds: 25.000 u/min<br/>table-size: 1200x550 mm<br/>max. tool diameter: 80 mm<br/>max. tool-dia with free toolbox: 125 mm<br/>max. tool length: 300 mm<br/>tool changing time: 3,7 sec<br/>tool change unit: 60-fach <br/>total power requirement: 47 kva<br/>weight of the machine ca.: 8,5 t<br/>dimensions of the machine ca.: 3,0x2,5x2,9 m<br/>machine with the following additional options:<br/>- spindle speed 25,000 min-1 (hsk 63)<br/>- 60x tool magazine<br/>- signal lamp for processing end by a yellow signal light<br/>- pressure switch for coolant supply through the spindle<br/>- air blower on the workpiece<br/>- cooling with air through the spindle knoll<br/>- robot interface<br/>- automatic switch off via circuit breaker tripping<br/>- automatic door with two-hand switch<br/>- macro for tool break detection and mms in eia / iso<br/>- laser tool measurement (blum)<br/>- mazak montoring system b optical omp 60 including probe<br/>- reference groove for y-axis in the table<br/>- spindle alignment in several positions<br/>- 3d coordinates conversion<br/>- thread retraction function<br/>- cylinder interpolation g07.1<br/>- synchronous tapping<br/>- tool radius compensation 5 axes<br/>- chip conveyor system series iii with hdk 70 bar consisting of:<br/>  chip conveyor dual type<br/>  filtration system<br/>  coolant unit<br/>  high pressure cooling 70 bar with variable pressure stages (controlled via<br/>m functions of the machine)<br/><br/><br/>it was thus sealing surfaces, sealing levels in hardened materials in one<br/>tolerance class of ± 0,001mm milled.<br/>only hard-milled and copper electrodes were manufactured on this machine.<br/>no heavy cutting!<br/><br/><br/><br/><br/> X-TRAVEL: 1020 MM
Y-TRAVEL: 510 MM
Z-TRAVEL: 460 MM
CONTROL: MATRIX NEXUS
TOOL TAPER: HSK 63
TURNING SPEEDS: 25.000 U/MIN
TABLE-SIZE: 1200X550 MM
MAX. TOOL DIAMETER: 80 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 125 MM
MAX. TOOL LENGTH: 300 MM
TOOL CHANGING TIME: 3,7 SEC
TOOL CHANGE UNIT: 60-FACH
TOTAL POWER REQUIREMENT: 47 KVA
WEIGHT OF THE MACHINE CA.: 8,5 T
DIMENSIONS OF THE MACHINE CA.: 3,0X2,5X2,9 M
MACHINE WITH THE FOLLOWING ADDITIONAL OPTIONS:
- SPINDLE SPEED 25,000 MIN-1 (HSK 63)
- 60X TOOL MAGAZINE
- SIGNAL LAMP FOR PROCESSING END BY A YELLOW SIGNAL LIGHT
- PRESSURE SWITCH FOR COOLANT SUPPLY THROUGH THE SPINDLE
- AIR BLOWER ON THE WORKPIECE
- COOLING WITH AIR THROUGH THE SPINDLE KNOLL
- ROBOT INTERFACE
- AUTOMATIC SWITCH OFF VIA CIRCUIT BREAKER TRIPPING
- AUTOMATIC DOOR WITH TWO-HAND SWITCH
- MACRO FOR TOOL BREAK DETECTION AND MMS IN EIA / ISO
- LASER TOOL MEASUREMENT (BLUM)
- MAZAK MONTORING SYSTEM B OPTICAL OMP 60 INCLUDING PROBE
- REFERENCE GROOVE FOR Y-AXIS IN THE TABLE
- SPINDLE ALIGNMENT IN SEVERAL POSITIONS
- 3D COORDINATES CONVERSION
- THREAD RETRACTION FUNCTION
- CYLINDER INTERPOLATION G07.1
- SYNCHRONOUS TAPPING
- TOOL RADIUS COMPENSATION 5 AXES
- CHIP CONVEYOR SYSTEM SERIES III WITH HDK 70 BAR CONSISTING OF:
CHIP CONVEYOR DUAL TYPE
FILTRATION SYSTEM
COOLANT UNIT
HIGH PRESSURE COOLING 70 BAR WITH VARIABLE PRESSURE STAGES (CONTROLLED VIA
M FUNCTIONS OF THE MACHINE)


IT WAS THUS SEALING SURFACES, SEALING LEVELS IN HARDENED MATERIALS IN ONE
TOLERANCE CLASS OF ± 0,001MM MILLED.
ONLY HARD-MILLED AND COPPER ELECTRODES WERE MANUFACTURED ON THIS MACHINE.
NO HEAVY CUTTING!




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-indexing plate slots: 12, chuck diameter: 3x 8mm, 1x 6mm, controls: siemens coros op15, pneumatic feeder with additional hydraulic clamping, cam-controlled units, cut-off saw with circular saw blade, 2x radial quill units, 2x radial thread drilling units, 2x radial screw units with controls haba, 5x axial quill units for drilling and milling, 1x piercing unit, cooling system with chip conveyor knoll and bar loader iemca.  INDEXING PLATE SLOTS: 12, CHUCK DIAMETER: 3X 8MM, 1X 6MM, CONTROLS: SIEMENS COROS OP15, PNEUMATIC FEEDER WITH ADDITIONAL HYDRAULIC CLAMPING, CAM-CONTROLLED UNITS, CUT-OFF SAW WITH CIRCULAR SAW BLADE, 2X RADIAL QUILL UNITS, 2X RADIAL THREAD DRILLING UNITS, 2X RADIAL SCREW UNITS WITH CONTROLS HABA, 5X AXIAL QUILL UNITS FOR DRILLING AND MILLING, 1X PIERCING UNIT, COOLING SYSTEM WITH CHIP CONVEYOR KNOLL AND BAR LOADER IEMCA.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-control: siemens 840 d <br/>bar loader - 2 revolving workpiece feed and removal<br/>tool shots: hsk and vdi 40<br/>workpiece gripper on all 3 turrets<br/>left: 6-fold end turret<br/>then: nc vice<br/>center: 12-disc disc turret<br/>then: nc steady rest, self-centering, tailstock below,<br/>hydraulic double piston clamping cylinder above<br/>right: 12-disc disc turret for driven tools<br/>chip conveyor<br/>knoll plant 1500l<br/>coolant supply 7-30 bar<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> CONTROL: SIEMENS 840 D
BAR LOADER - 2 REVOLVING WORKPIECE FEED AND REMOVAL
TOOL SHOTS: HSK AND VDI 40
WORKPIECE GRIPPER ON ALL 3 TURRETS
LEFT: 6-FOLD END TURRET
THEN: NC VICE
CENTER: 12-DISC DISC TURRET
THEN: NC STEADY REST, SELF-CENTERING, TAILSTOCK BELOW,
HYDRAULIC DOUBLE PISTON CLAMPING CYLINDER ABOVE
RIGHT: 12-DISC DISC TURRET FOR DRIVEN TOOLS
CHIP CONVEYOR
KNOLL PLANT 1500L
COOLANT SUPPLY 7-30 BAR



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-overview
brand: heller
model: mci 25
application type: milling
machine type: machining centers (horizontal) 
availability: immediately
production year: 2005
location: turkey
origin country: germany 
production hours: 78000

general data
measurements width: 6500 mm 
measurements depth: 3500 mm 
measurements height: 3600 mm 
machine weight: 19000 kg

control unit
brand: siemens
model: sinumerik 840d
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 16000 1/min

movement
x-axis movement: 800 mm 
y-axis movement: 800 mm 
z-axis movement: 800 mm 
b-axis movement: 360 / 0.001°

workpiece
workpiece drm: 900 mm 
workpiece weight: 800 kg

table
outer length: 500 mm 
outer width: 630 mm

tools
slots in storage: 80
max weight: 12 kg
max tool diameter: 150 mm 
max tool length: 400 mm 
type of tool holder: hsk 63

media
main electronic connection: 400 v 
power consumption: 70 kva
chip conveyor: yes
internal cooling: yes

additional equipment
1: cooling system
2: chip conveyer knoll
3: infrared measuring probe renishaw

se full technical specifications of this machine at:
abc://bit.ly/2r7agkx  OVERVIEW BRAND: HELLER MODEL: MCI 25 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (HORIZONTAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2005 LOCATION: TURKEY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 78000 GENERAL DATA MEASUREMENTS WIDTH: 6500 MM MEASUREMENTS DEPTH: 3500 MM MEASUREMENTS HEIGHT: 3600 MM MACHINE WEIGHT: 19000 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 840D CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 16000 1/MIN MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 800 MM Z-AXIS MOVEMENT: 800 MM B-AXIS MOVEMENT: 360 / 0.001° WORKPIECE WORKPIECE DRM: 900 MM WORKPIECE WEIGHT: 800 KG TABLE OUTER LENGTH: 500 MM OUTER WIDTH: 630 MM TOOLS SLOTS IN STORAGE: 80 MAX WEIGHT: 12 KG MAX TOOL DIAMETER: 150 MM MAX TOOL LENGTH: 400 MM TYPE OF TOOL HOLDER: HSK 63 MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 70 KVA CHIP CONVEYOR: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: COOLING SYSTEM 2: CHIP CONVEYER KNOLL 3: INFRARED MEASURING PROBE RENISHAW SE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2R7AGKX
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-control: siemens 840 d <br/>bar loader - 2 revolving workpiece feed and removal<br/>tool shots: hsk and vdi 40<br/>workpiece gripper on all 3 turrets<br/>left: 6-fold end turret<br/>then: nc vice<br/>center: 12-disc disc turret<br/>then: nc steady rest, self-centering, tailstock below,<br/>hydraulic double piston clamping cylinder above<br/>right: 12-disc disc turret for driven tools<br/>chip conveyor<br/>knoll plant 1500l<br/>coolant supply 7-30 bar<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> CONTROL: SIEMENS 840 D
BAR LOADER - 2 REVOLVING WORKPIECE FEED AND REMOVAL
TOOL SHOTS: HSK AND VDI 40
WORKPIECE GRIPPER ON ALL 3 TURRETS
LEFT: 6-FOLD END TURRET
THEN: NC VICE
CENTER: 12-DISC DISC TURRET
THEN: NC STEADY REST, SELF-CENTERING, TAILSTOCK BELOW,
HYDRAULIC DOUBLE PISTON CLAMPING CYLINDER ABOVE
RIGHT: 12-DISC DISC TURRET FOR DRIVEN TOOLS
CHIP CONVEYOR
KNOLL PLANT 1500L
COOLANT SUPPLY 7-30 BAR



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-chiron fz 12 w (1999)

overview
brand: chiron
model: fz 12 w
application type: milling
machine type: machining centers (vertical)
availability: immediately
production year: 1999
location: lithuania
origin country: germany
production hours: 4606

general data
measurements width: 2240 mm
measurements depth: 3550 mm
measurements height: 2450 mm
machine weight: 4000 kg

control unit
brand: siemens
cnc main language: swedish/ english

main drive
number of spindles: 1
spindle speed range: 10500 rpm

movement
x-axis movement: 550 mm
y-axis movement: 400 mm
z-axis movement: 450 mm

workpiece
workpiece x: 550 mm
workpiece y: 400 mm
workpiece z: 450 mm

table
outer length: 300 mm
outer width: 660 mm

tools
slots in storage: 12
max weight: 4 kg
max tool diameter: 65 mm
max tool length: 220 mm

media
main electronic connection: 400 v
power consumption: 20 kva
chip conveyor: yes

additional equipment
1: chip conveyer knoll
2: filter knoll
3: emulsion absorber (upon request) CHIRON FZ 12 W (1999) OVERVIEW BRAND: CHIRON MODEL: FZ 12 W APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1999 LOCATION: LITHUANIA ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 4606 GENERAL DATA MEASUREMENTS WIDTH: 2240 MM MEASUREMENTS DEPTH: 3550 MM MEASUREMENTS HEIGHT: 2450 MM MACHINE WEIGHT: 4000 KG CONTROL UNIT BRAND: SIEMENS CNC MAIN LANGUAGE: SWEDISH/ ENGLISH MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 10500 RPM MOVEMENT X-AXIS MOVEMENT: 550 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 450 MM WORKPIECE WORKPIECE X: 550 MM WORKPIECE Y: 400 MM WORKPIECE Z: 450 MM TABLE OUTER LENGTH: 300 MM OUTER WIDTH: 660 MM TOOLS SLOTS IN STORAGE: 12 MAX WEIGHT: 4 KG MAX TOOL DIAMETER: 65 MM MAX TOOL LENGTH: 220 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 20 KVA CHIP CONVEYOR: YES ADDITIONAL EQUIPMENT 1: CHIP CONVEYER KNOLL 2: FILTER KNOLL 3: EMULSION ABSORBER (UPON REQUEST)
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-faceplate diameter: 1400 mm<br/>swing diameter: 1450 mm<br/>turning height: 1630 mm<br/>max. workpiece weight: 6300 kg<br/>reus: max. 250 u/min<br/>cross rail adjustment - vertical: 1250 mm<br/>max. ram stroke: 1100 mm<br/>control: siemens 840 d <br/>total power requirement: - kw<br/>weight of the machine ca.: - t<br/>- general reconditioned and modernized in 2001<br/>- cnc - control siemens sinumerik 840 d<br/>- chip conveyor<br/>- paperband filter knoll<br/>-<br/>machine wasnt in use in production<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 1400 MM
SWING DIAMETER: 1450 MM
TURNING HEIGHT: 1630 MM
MAX. WORKPIECE WEIGHT: 6300 KG
REUS: MAX. 250 U/MIN
CROSS RAIL ADJUSTMENT - VERTICAL: 1250 MM
MAX. RAM STROKE: 1100 MM
CONTROL: SIEMENS 840 D
TOTAL POWER REQUIREMENT: - KW
WEIGHT OF THE MACHINE CA.: - T
- GENERAL RECONDITIONED AND MODERNIZED IN 2001
- CNC - CONTROL SIEMENS SINUMERIK 840 D
- CHIP CONVEYOR
- PAPERBAND FILTER KNOLL
-
MACHINE WASNT IN USE IN PRODUCTION




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: chiron
model: fz 18l
application type: milling
machine type: vertical machining centers 
availability: immediately
construction year: 1996
production hours: 55000
location: croatia
origin country: germany

general data:
measurements width: 5665 mm
measurements depth: 3160 mm
measurements height: 3000 mm
machine weight: 7200 kg

control unit:
brand: siemens
model: sinumerik 810

movement:
x-axis movement: 2000 mm
y-axis movement: 400 mm
z-axis movement: 425 mm

table:
outer length: 2300 mm
outer width: 400 mm

media:
main electronic connection: 400 v / 50 hz
power consumption: 50 kva

additional equipment:
atc 36 places – without tools
extra magnet table
chip conveyor knoll
piesler grt160 rotary unit

see full technical specifications at: abc://bit.ly/2pv80yj

 OVERVIEW: BRAND: CHIRON MODEL: FZ 18L APPLICATION TYPE: MILLING MACHINE TYPE: VERTICAL MACHINING CENTERS AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 1996 PRODUCTION HOURS: 55000 LOCATION: CROATIA ORIGIN COUNTRY: GERMANY GENERAL DATA: MEASUREMENTS WIDTH: 5665 MM MEASUREMENTS DEPTH: 3160 MM MEASUREMENTS HEIGHT: 3000 MM MACHINE WEIGHT: 7200 KG CONTROL UNIT: BRAND: SIEMENS MODEL: SINUMERIK 810 MOVEMENT: X-AXIS MOVEMENT: 2000 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 425 MM TABLE: OUTER LENGTH: 2300 MM OUTER WIDTH: 400 MM MEDIA: MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ POWER CONSUMPTION: 50 KVA ADDITIONAL EQUIPMENT: ATC 36 PLACES – WITHOUT TOOLS EXTRA MAGNET TABLE CHIP CONVEYOR KNOLL PIESLER GRT160 ROTARY UNIT SEE FULL TECHNICAL SPECIFICATIONS AT: ABC://BIT.LY/2PV80YJ
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-x-travel:630 mm<br/>y-travel:600 mm<br/>z-travel:650 mm<br/>control:msx 502 mapps 3 <br/>spindle speeds:12000 1/min<br/>rapid travel x/y/z:32 m/min<br/>number of tool station:120 bt 40 sk40<br/>spindle drive:22 kw<br/>pallet dimension:500x500 mm<br/>numbers of pallets:3 <br/>table load:0,5 t<br/>working diameter:max. 610 mm<br/>max. tool length:360 mm<br/>max. tool weight:12 kg<br/>tool changing time:1,3 sec<br/>total power requirement:64 kva<br/>weight of the machine ca.:14 t<br/>dimensions of the machine ca.:3x4,5x3,4 m<br/>internal coolant system feed:knoll vrf750 / 50 bar <br/>b-axis fully integrated 360.000 x 0,001°: <br/>hydraulic supply through table for fixtures: <br/>chip conveyor: <br/><br/>horizontal machining center with 500 mm triple pallet changer,, 120 tool stations, trough spindle coolant 50 bar, 4th axis, chipconveyor, it has a hydralic system for through pallet clamping system for fixtures. a few weeks ago the machine has received a new main spindle for over 30.000 ? X-TRAVEL:630 MM
Y-TRAVEL:600 MM
Z-TRAVEL:650 MM
CONTROL:MSX 502 MAPPS 3
SPINDLE SPEEDS:12000 1/MIN
RAPID TRAVEL X/Y/Z:32 M/MIN
NUMBER OF TOOL STATION:120 BT 40 SK40
SPINDLE DRIVE:22 KW
PALLET DIMENSION:500X500 MM
NUMBERS OF PALLETS:3
TABLE LOAD:0,5 T
WORKING DIAMETER:MAX. 610 MM
MAX. TOOL LENGTH:360 MM
MAX. TOOL WEIGHT:12 KG
TOOL CHANGING TIME:1,3 SEC
TOTAL POWER REQUIREMENT:64 KVA
WEIGHT OF THE MACHINE CA.:14 T
DIMENSIONS OF THE MACHINE CA.:3X4,5X3,4 M
INTERNAL COOLANT SYSTEM FEED:KNOLL VRF750 / 50 BAR
B-AXIS FULLY INTEGRATED 360.000 X 0,001°:
HYDRAULIC SUPPLY THROUGH TABLE FOR FIXTURES:
CHIP CONVEYOR:

HORIZONTAL MACHINING CENTER WITH 500 MM TRIPLE PALLET CHANGER,, 120 TOOL STATIONS, TROUGH SPINDLE COOLANT 50 BAR, 4TH AXIS, CHIPCONVEYOR, IT HAS A HYDRALIC SYSTEM FOR THROUGH PALLET CLAMPING SYSTEM FOR FIXTURES. A FEW WEEKS AGO THE MACHINE HAS RECEIVED A NEW MAIN SPINDLE FOR OVER 30.000 ?
Vendedor: BTT Bosetti TechTransfer
Año de construcción: usado
Ubicación: Land-number of tool slots: 42, hollow taper: hsk 63a, tool mount: sk 40, max. tool length: 280mm, tool diameter: 78-160mm, tool weight: 5-8kg, compressed air supply: 5.5bar, compressed air consumption: 1000nl/min, control: siemens sinumerik 840d, including chip conveyor, 2 rotary axis peiseler awup 160, high pressure plant and drum filter knoll, tool changer is in need of repair.  NUMBER OF TOOL SLOTS: 42, HOLLOW TAPER: HSK 63A, TOOL MOUNT: SK 40, MAX. TOOL LENGTH: 280MM, TOOL DIAMETER: 78-160MM, TOOL WEIGHT: 5-8KG, COMPRESSED AIR SUPPLY: 5.5BAR, COMPRESSED AIR CONSUMPTION: 1000NL/MIN, CONTROL: SIEMENS SINUMERIK 840D, INCLUDING CHIP CONVEYOR, 2 ROTARY AXIS PEISELER AWUP 160, HIGH PRESSURE PLANT AND DRUM FILTER KNOLL, TOOL CHANGER IS IN NEED OF REPAIR.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 800 mm<br/>z-travel: 800 mm<br/>control: sin 840d <br/>size of pallet: 2x 500 x 630 mm<br/>workpiece weight: 800 kg<br/>spindle turning speed - stepless: 45 - 16.000 u/min<br/>spindle drive: 30,00 kw<br/>tool taper: hsk 63 <br/>feed x/y/z-axis: 1 - 1000 mm/min<br/>rapid traverse x/y/z: 40 m/min<br/>rapid traverse rotary table: 20 u/min<br/>tool diameter: 72 mm<br/>tool diameter with 2 vacant positions: 150 mm<br/>tool length - max.: 400 mm<br/>rotary table: 360000x0,001° mm/min<br/>range l-w-h: 18x10x5 m<br/>tool magazin:: 160 stück<br/>total power requirement: 56,00 kw<br/>weight of the machine ca.: je 12 t<br/>2 x horizontal machining center with palettsystem for 32 paletts and 2 <br/>preparing stations, hydraulical palett voltage<br/>siemens sin840d control,<br/>coolant unit knoll, chip conveyor, coolant through the spindle <br/>machine can be inspected under power.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 800 MM
Z-TRAVEL: 800 MM
CONTROL: SIN 840D
SIZE OF PALLET: 2X 500 X 630 MM
WORKPIECE WEIGHT: 800 KG
SPINDLE TURNING SPEED - STEPLESS: 45 - 16.000 U/MIN
SPINDLE DRIVE: 30,00 KW
TOOL TAPER: HSK 63
FEED X/Y/Z-AXIS: 1 - 1000 MM/MIN
RAPID TRAVERSE X/Y/Z: 40 M/MIN
RAPID TRAVERSE ROTARY TABLE: 20 U/MIN
TOOL DIAMETER: 72 MM
TOOL DIAMETER WITH 2 VACANT POSITIONS: 150 MM
TOOL LENGTH - MAX.: 400 MM
ROTARY TABLE: 360000X0,001° MM/MIN
RANGE L-W-H: 18X10X5 M
TOOL MAGAZIN:: 160 STüCK
TOTAL POWER REQUIREMENT: 56,00 KW
WEIGHT OF THE MACHINE CA.: JE 12 T
2 X HORIZONTAL MACHINING CENTER WITH PALETTSYSTEM FOR 32 PALETTS AND 2
PREPARING STATIONS, HYDRAULICAL PALETT VOLTAGE
SIEMENS SIN840D CONTROL,
COOLANT UNIT KNOLL, CHIP CONVEYOR, COOLANT THROUGH THE SPINDLE
MACHINE CAN BE INSPECTED UNDER POWER.





Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-max. rotational speed: 6000/min, torque: 105-145nm, number of tool slots revolver 1/ revolver 2: 8/ 6, tool system din 69880: 25mm, sledge stroke: 90mm, feed force: 5500nm, max. rapid traverse x-travel: 27m/min, max. rapid traverse z-travel: 36m/min, acceleration: 6m/s², rotational speed synchronous spindle: 4500/min, length: 6280mm, height: 1750mm, weight: 2.5t, including chip conveyor knoll 200 s-1/270 and various tools. MAX. ROTATIONAL SPEED: 6000/MIN, TORQUE: 105-145NM, NUMBER OF TOOL SLOTS REVOLVER 1/ REVOLVER 2: 8/ 6, TOOL SYSTEM DIN 69880: 25MM, SLEDGE STROKE: 90MM, FEED FORCE: 5500NM, MAX. RAPID TRAVERSE X-TRAVEL: 27M/MIN, MAX. RAPID TRAVERSE Z-TRAVEL: 36M/MIN, ACCELERATION: 6M/S², ROTATIONAL SPEED SYNCHRONOUS SPINDLE: 4500/MIN, LENGTH: 6280MM, HEIGHT: 1750MM, WEIGHT: 2.5T, INCLUDING CHIP CONVEYOR KNOLL 200 S-1/270 AND VARIOUS TOOLS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-spindle bore: 36 mm<br/>collet: 32 mm<br/>control: fanuc 160it <br/>additional information: <br/><br/>- 9-axis <br/>- y2 axis with 4 stations for turning and driving all 6 stations<br/>- 4-way distributor ½ with piping to counterspindle for flushing,<br/>rather than blowing out <br/>- chip conveyor knoll <br/>- tool monitoring system momo<br/><br/><br/><br/><br/> SPINDLE BORE: 36 MM
COLLET: 32 MM
CONTROL: FANUC 160IT
ADDITIONAL INFORMATION:

- 9-AXIS
- Y2 AXIS WITH 4 STATIONS FOR TURNING AND DRIVING ALL 6 STATIONS
- 4-WAY DISTRIBUTOR ½ WITH PIPING TO COUNTERSPINDLE FOR FLUSHING,
RATHER THAN BLOWING OUT
- CHIP CONVEYOR KNOLL
- TOOL MONITORING SYSTEM MOMO




Vendedor: STEINHAND GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KNOLL types: