29 ofertas

Año de construcción: usado
Ubicación: Land-kaiserstuepfler
wp comet stã¼pfler
2-row for hand use
weight range 40 to 80 grams / piece
manual operation
retractable outfeed conveyor
checked dguv v3
connection 400v, 1,1 kw, 16a-cee plug
dimensions: 550 x 420 x 530 mm wxdxh
second-hand machine cleaned and checked KAISERSTUEPFLER WP COMET STüPFLER 2-ROW FOR HAND USE WEIGHT RANGE 40 TO 80 GRAMS / PIECE MANUAL OPERATION RETRACTABLE OUTFEED CONVEYOR CHECKED DGUV V3 CONNECTION 400V, 1,1 KW, 16A-CEE PLUG DIMENSIONS: 550 X 420 X 530 MM WXDXH SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-type 2/50,  2 rows, \r\ncap. max. 5.500 pcs./h, max. 60 g\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new TYPE 2/50, 2 ROWS, \R\NCAP. MAX. 5.500 PCS./H, MAX. 60 G\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-complete reconditioned machine 5/2018 rotor storage: new
 bcnxpl3lzy
 clutch facing: new
 counter blades with reinforcement: new
 power bands: new
 knife holder: new
 seal-rotor: new
 sealing ring wall: new
 screening cassette: new
 wear plates: new
 all knives: new
 terminal strip above: new
 hydraulic oil: new

single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. 
 application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboard, art and foams, rubber, leather, textiles, bodenbelaege.etc. 
 work capacity: 1 x 200 kw
 enclosure: complete with r & d
 filler: 1770 x 1700 mm
 einvuellvolumen: approx. 3m 3
 job opening: 1770 x 1315 mm
 rotor length: 1770 mm
 rotor flight circle: 740 mm
 rotor speed: approx. 200-380 rpm
 rotor blades: 50 pieces
 geggenmesser below: 10 piece rubber comb above: 10 piece feed hydraulic: 11 kw
 printing: 30 mm (according to request) funnel: yes
 weight: ca. 18 tons
 dimensions lxwxh mm: 5100 x 2900 x 2700(h=4500 mm mit trichter) COMPLETE RECONDITIONED MACHINE 5/2018 ROTOR STORAGE: NEW BCNXPL3LZY CLUTCH FACING: NEW COUNTER BLADES WITH REINFORCEMENT: NEW POWER BANDS: NEW KNIFE HOLDER: NEW SEAL-ROTOR: NEW SEALING RING WALL: NEW SCREENING CASSETTE: NEW WEAR PLATES: NEW ALL KNIVES: NEW TERMINAL STRIP ABOVE: NEW HYDRAULIC OIL: NEW SINGLE-SHAFT SHREDDER IDEAL FOR THE MILLING, GRANULATION OF VORGESCHREDDERTEM MATERIAL. APPLICATION: INDUSTRIAL WASTE FOR THERMAL OR WERTSTOFFLLICHEN RECOVERY SUCH AS PAPER, CARDBOARD, ART AND FOAMS, RUBBER, LEATHER, TEXTILES, BODENBELAEGE.ETC. WORK CAPACITY: 1 X 200 KW ENCLOSURE: COMPLETE WITH R & D FILLER: 1770 X 1700 MM EINVUELLVOLUMEN: APPROX. 3M 3 JOB OPENING: 1770 X 1315 MM ROTOR LENGTH: 1770 MM ROTOR FLIGHT CIRCLE: 740 MM ROTOR SPEED: APPROX. 200-380 RPM ROTOR BLADES: 50 PIECES GEGGENMESSER BELOW: 10 PIECE RUBBER COMB ABOVE: 10 PIECE FEED HYDRAULIC: 11 KW PRINTING: 30 MM (ACCORDING TO REQUEST) FUNNEL: YES WEIGHT: CA. 18 TONS DIMENSIONS LXWXH MM: 5100 X 2900 X 2700(H=4500 MM MIT TRICHTER)
Vendedor: Recotech Recyclingmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-2 rows,\r\ntype 2/50,  cap. max. 5.500 pcs./h, max. 60 g\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new\r\n 2 ROWS,\R\NTYPE 2/50, CAP. MAX. 5.500 PCS./H, MAX. 60 G\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-komet 	plusvac 25	
twin chamber vacuum packer		
stainless frame, chamber sizes 550mm x 475mm x 80mm, sealing bar 450mm at either side of chamber
 KOMET PLUSVAC 25 TWIN CHAMBER VACUUM PACKER STAINLESS FRAME, CHAMBER SIZES 550MM X 475MM X 80MM, SEALING BAR 450MM AT EITHER SIDE OF CHAMBER
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-4 bottom units, split heads, each with 9 spindles, 32 mm centers<br/>2 side units<br/>manual setting with digital read-out<br/>quick-release chucks 4 BOTTOM UNITS, SPLIT HEADS, EACH WITH 9 SPINDLES, 32 MM CENTERS
2 SIDE UNITS
MANUAL SETTING WITH DIGITAL READ-OUT
QUICK-RELEASE CHUCKS
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-; good, fully functional state ; GOOD, FULLY FUNCTIONAL STATE
Vendedor: Weigel – Consulting
Año de construcción: usado
Precio: 550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-workpiece width: 70-1000mm, workpiece length: 215-2500mm, workpiece height: 10-25mm, drill power: 1.5kw, drill stroke: 60mm max., length: 11000mm, width: 10000mm, height: 3000mm, weight: 15t.  WORKPIECE WIDTH: 70-1000MM, WORKPIECE LENGTH: 215-2500MM, WORKPIECE HEIGHT: 10-25MM, DRILL POWER: 1.5KW, DRILL STROKE: 60MM MAX., LENGTH: 11000MM, WIDTH: 10000MM, HEIGHT: 3000MM, WEIGHT: 15T.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 75 €
Ubicación: Land-weight approx.: 4 kg<br/>dimensions (l x w x h) approx.: 500 x 30 x 20 mm<br/>description: 450 x 35 x 2 mm, 4/7 z WEIGHT APPROX.: 4 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 30 X 20 MM
DESCRIPTION: 450 X 35 X 2 MM, 4/7 Z
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-double chamber vacuum packaging machine komet sd 320, mc control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment.

you are very welcome to inspect and test the machine in our facility in koblenz, germany.
 DOUBLE CHAMBER VACUUM PACKAGING MACHINE KOMET SD 320, MC CONTROL, ALL STAINLESS STEEL, HIGH PERFORMANCE VACUUM PUMP, ELECTRONIC CONTROL, INLET PLATES FOR HEIGHT ADJUSTMENT. YOU ARE VERY WELCOME TO INSPECT AND TEST THE MACHINE IN OUR FACILITY IN KOBLENZ, GERMANY.
Vendedor: DL Leasing 1988 GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 600 x 50 x 20 mm<br/>description: 14 tpi, 550 x 45 x 2 mm WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 50 X 20 MM
DESCRIPTION: 14 TPI, 550 X 45 X 2 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-wheels 㘠300 mm, width 50 mm.
digital display, discs puller, wheel flange.
the machine was used until recently in the construction of the tool.
machine dimensions:
width 1800 mm
depth (max. 1695) 1270 mm
height 2000 mm
grinding length 500 mm
grinding width 350 mm
workpiece height 450 mm
table size 900 x 300 mm
el. magnetic 500 / 300 mm machine weight approx. 2,5 t
 WHEELS &ATILDE;˜ 300 MM, WIDTH 50 MM. DIGITAL DISPLAY, DISCS PULLER, WHEEL FLANGE. THE MACHINE WAS USED UNTIL RECENTLY IN THE CONSTRUCTION OF THE TOOL. MACHINE DIMENSIONS: WIDTH 1800 MM DEPTH (MAX. 1695) 1270 MM HEIGHT 2000 MM GRINDING LENGTH 500 MM GRINDING WIDTH 350 MM WORKPIECE HEIGHT 450 MM TABLE SIZE 900 X 300 MM EL. MAGNETIC 500 / 300 MM MACHINE WEIGHT APPROX. 2,5 T
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 600 x 50 x 20 mm<br/>description: 14 tpi, 575 x 50 x 2.5 mm, for kasto WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 50 X 20 MM
DESCRIPTION: 14 TPI, 575 X 50 X 2.5 MM, FOR KASTO
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 67.000 €
Ubicación: Land-1 piece rotary transfer machining machine
wenzler type mta 6
built in 1988
1995 general overhaul since that time more than 1 - ply ran. 

the machine has a plate with 6 piece chuck geiger and haag, a siemens s 5
control, hydraulic from bosch rexroth, coolant system and chip conveyors by knoll,

the machine has 10 units of machining units of 1 track with comet boring head, the
tool holder is sk 40.

for some critical editing tools with tool breakage control is
equipped.

on the machine t-pieces and contra-angle handpieces manufactured, i.e. that the blanks were inserted automatically into the machine and were taken out after editing again automatically.

the machine runs automatically.

you can cut parts for three way editing etc. their welding fittings and
cutting ring couplings etc.

-units 10 pcs 
-tool breakage control - conveyors - cooling plant - 1995 geometrically and electrically an overhaul - siemens s5 - after 5 years 1-layers in use - immediately applicable

reconditioned 1995 control: converted to s5 piece picking 6xkraftspannfutter by violinist and featuring hydraulic knoll chip conveyor with cooling device hague with rexroth part magazine on rotary indexing table and handling equipment for loading and removal 5 machining units radially and others 
1 x with komet boring head 1 x tapping unit 3 more horizontal machining units total 11 piece machining units with mountain drive power supply approx. 48 kw machine weight approx. 16 t, footprint of the machine 5.5 x 5.5 m, height 4 m  1 PIECE ROTARY TRANSFER MACHINING MACHINE WENZLER TYPE MTA 6 BUILT IN 1988 1995 GENERAL OVERHAUL SINCE THAT TIME MORE THAN 1 - PLY RAN. THE MACHINE HAS A PLATE WITH 6 PIECE CHUCK GEIGER AND HAAG, A SIEMENS S 5 CONTROL, HYDRAULIC FROM BOSCH REXROTH, COOLANT SYSTEM AND CHIP CONVEYORS BY KNOLL, THE MACHINE HAS 10 UNITS OF MACHINING UNITS OF 1 TRACK WITH COMET BORING HEAD, THE TOOL HOLDER IS SK 40. FOR SOME CRITICAL EDITING TOOLS WITH TOOL BREAKAGE CONTROL IS EQUIPPED. ON THE MACHINE T-PIECES AND CONTRA-ANGLE HANDPIECES MANUFACTURED, I.E. THAT THE BLANKS WERE INSERTED AUTOMATICALLY INTO THE MACHINE AND WERE TAKEN OUT AFTER EDITING AGAIN AUTOMATICALLY. THE MACHINE RUNS AUTOMATICALLY. YOU CAN CUT PARTS FOR THREE WAY EDITING ETC. THEIR WELDING FITTINGS AND CUTTING RING COUPLINGS ETC. -UNITS 10 PCS -TOOL BREAKAGE CONTROL - CONVEYORS - COOLING PLANT - 1995 GEOMETRICALLY AND ELECTRICALLY AN OVERHAUL - SIEMENS S5 - AFTER 5 YEARS 1-LAYERS IN USE - IMMEDIATELY APPLICABLE RECONDITIONED 1995 CONTROL: CONVERTED TO S5 PIECE PICKING 6XKRAFTSPANNFUTTER BY VIOLINIST AND FEATURING HYDRAULIC KNOLL CHIP CONVEYOR WITH COOLING DEVICE HAGUE WITH REXROTH PART MAGAZINE ON ROTARY INDEXING TABLE AND HANDLING EQUIPMENT FOR LOADING AND REMOVAL 5 MACHINING UNITS RADIALLY AND OTHERS 1 X WITH KOMET BORING HEAD 1 X TAPPING UNIT 3 MORE HORIZONTAL MACHINING UNITS TOTAL 11 PIECE MACHINING UNITS WITH MOUNTAIN DRIVE POWER SUPPLY APPROX. 48 KW MACHINE WEIGHT APPROX. 16 T, FOOTPRINT OF THE MACHINE 5.5 X 5.5 M, HEIGHT 4 M
Vendedor: W&T EFRA
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: approx. 30 pieces misc. manufacteurs and types of interfaces e.g.: collet chuck er16 komet abs80 shrink fit holder ø6-12 mm weldon/emuge, e.g. sk50 d32 din 1835b without pull-studs! toolholder partly new! WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: APPROX. 30 PIECES MISC. MANUFACTEURS AND TYPES OF INTERFACES E.G.: COLLET CHUCK ER16 KOMET ABS80 SHRINK FIT HOLDER ø6-12 MM WELDON/EMUGE, E.G. SK50 D32 DIN 1835B WITHOUT PULL-STUDS! TOOLHOLDER PARTLY NEW!
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: approx. 30 pieces misc. manufacteurs and types of interfaces e.g.: komet abs80 shrink fit holder ø6-18 mm weldon ø20-32 mm seco graflex toolsystem without pull-studs! toolholder partly new! WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: APPROX. 30 PIECES MISC. MANUFACTEURS AND TYPES OF INTERFACES E.G.: KOMET ABS80 SHRINK FIT HOLDER ø6-18 MM WELDON ø20-32 MM SECO GRAFLEX TOOLSYSTEM WITHOUT PULL-STUDS! TOOLHOLDER PARTLY NEW!
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: approx. 30 pieces various manufacteurs and types of interfaces e.g.: komet abs80 shrink fit ø8-32 mm weldon, emuge seco graflex toolsystem without pull-studs! toolholder partly new! WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: APPROX. 30 PIECES VARIOUS MANUFACTEURS AND TYPES OF INTERFACES E.G.: KOMET ABS80 SHRINK FIT ø8-32 MM WELDON, EMUGE SECO GRAFLEX TOOLSYSTEM WITHOUT PULL-STUDS! TOOLHOLDER PARTLY NEW!
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 300 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 600 mm<br/>description: approx. 30 pieces various manufacteurs and types of interfaces e.g.: komet abs50/63/80 shrink fit holder ø6-12 mm weldon collet chuck er16 seco graflex toolsystem various additional tool holder, e.g. emuge without pull-studs! toolholder partly new! WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: APPROX. 30 PIECES VARIOUS MANUFACTEURS AND TYPES OF INTERFACES E.G.: KOMET ABS50/63/80 SHRINK FIT HOLDER ø6-12 MM WELDON COLLET CHUCK ER16 SECO GRAFLEX TOOLSYSTEM VARIOUS ADDITIONAL TOOL HOLDER, E.G. EMUGE WITHOUT PULL-STUDS! TOOLHOLDER PARTLY NEW!
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 400 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 195 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 750 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 80 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 3.630 EU€
Ubicación: Land-the spreader is in good technical condition. operational damage was found in the form of dirt, residues of manure, traces of corrosion, paint chips and scratches. the tires of all wheels are the same mitas im-04 10.0 / 75 r15,3 with a tread height of 17 mm. THE SPREADER IS IN GOOD TECHNICAL CONDITION. OPERATIONAL DAMAGE WAS FOUND IN THE FORM OF DIRT, RESIDUES OF MANURE, TRACES OF CORROSION, PAINT CHIPS AND SCRATCHES. THE TIRES OF ALL WHEELS ARE THE SAME MITAS IM-04 10.0 / 75 R15,3 WITH A TREAD HEIGHT OF 17 MM.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-grinding length: 700 mm<br/>grinding width: 350 mm<br/>workpiece height: - mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 3,4 t<br/>dimensions: 2,87 x 1,73 x 2,12 m<br/>- with autom. vertical adjustment -<br/><br/>accessories: magnetic plate 700 x 300 mm, grinding wheel with flange,<br/>             dro on y-and z-axis, wheel trueing attachment, wet grinding<br/>             attachment<br/><br/><br/><br/><br/> GRINDING LENGTH: 700 MM
GRINDING WIDTH: 350 MM
WORKPIECE HEIGHT: - MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 3,4 T
DIMENSIONS: 2,87 X 1,73 X 2,12 M
- WITH AUTOM. VERTICAL ADJUSTMENT -

ACCESSORIES: MAGNETIC PLATE 700 X 300 MM, GRINDING WHEEL WITH FLANGE,
DRO ON Y-AND Z-AXIS, WHEEL TRUEING ATTACHMENT, WET GRINDING
ATTACHMENT




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KOMET types: