29 ofertas

Año de construcción: usado
Precio: 550.000 €
Ubicación: Land-filling line krones / kosme pet 4500 bph for csd

the line was built by kosme (nowadays a part of krones) in 2007. it has been in water filling operation only less than 900 total operating hours and is still installed, powered and can be tested. line is also suitable for carbonated and non-carbonated soft drinks and waters. three sets of molds will be a part of this delivery. this line contains also mixer – carbonator which allows to produce carbonated soft drinks. condition is very good.

main characteristics of this line

manufacturer                             kosme / krones

manufacturing year                   2007

total operating hours                873 hours only

products                                   waters, csd

capacity                                  4500 bph in 1.5 liter pet

neck finish                              plastic scew pco 28 mm  

molds                                      2 l 47.5 gr, 1.5 l 39.5 gr and 0.5 l 20.5 gr

max co2 content                    8 gr / liter

max concentrate mix              1:7

electric suppy                         400v +/- 5% 50 hz +/- 0,5% 3ph+n+pe
 

list of main equipment, all made in year 2007

blow molding machine kosme ksb 3000 s1
          linear blow molding machine with capacity of 4500 bph in 1.5 liters

          equipped with kosmatic faulty pet bottle discharge system 

          includes preform feeding system and mta tae 051 chiller for blow molder

high pressure air compressor kaeser csdx 137 with high pressure dryer, micro filter and buffer tank
pneumatic conveyor kosme “lt”
pet bottle filler kosme isoblock nh 24/24/6. neck handling, isobaric filling, all parts aisi 304. 24 rinsing stations with spray and dip system, 24 filling nozzles and arol capper with 6 capping heads.
bottle conveyors type kosme “ft”
air dryer kosme “air 2000” with two blowers
labeler kosmr extra hot melt 8 t si 1. wraparound hot clue labeler for precut paper and plastic labels
shrink wrapping machine kosme with shrink tunnel. packaging formats 3x2 bottles for 1.5 and 2 liters and 3x4 for 0.5 liter bottles
mixer euromix 10 with carbonizer. designed to produce carbonated soft drinks by mixing water and syrup and adding co2. capacity 10 000 liters/hour, syrup-water mixing ration from 3:1 to 7:1, max co2 8 gr/liter
water ionizing unit kosme “ozomix 700” capacity 7000 l/h, max product temp 30c
automatic cip line kosme eurosan with 1 x 2 m3 insulated and 1 x 2 m3 not insulated tank.
liquid co2 tank buse
semiautomatic pallet stretch wrapping machine FILLING LINE KRONES / KOSME PET 4500 BPH FOR CSD THE LINE WAS BUILT BY KOSME (NOWADAYS A PART OF KRONES) IN 2007. IT HAS BEEN IN WATER FILLING OPERATION ONLY LESS THAN 900 TOTAL OPERATING HOURS AND IS STILL INSTALLED, POWERED AND CAN BE TESTED. LINE IS ALSO SUITABLE FOR CARBONATED AND NON-CARBONATED SOFT DRINKS AND WATERS. THREE SETS OF MOLDS WILL BE A PART OF THIS DELIVERY. THIS LINE CONTAINS ALSO MIXER – CARBONATOR WHICH ALLOWS TO PRODUCE CARBONATED SOFT DRINKS. CONDITION IS VERY GOOD. MAIN CHARACTERISTICS OF THIS LINE MANUFACTURER KOSME / KRONES MANUFACTURING YEAR 2007 TOTAL OPERATING HOURS 873 HOURS ONLY PRODUCTS WATERS, CSD CAPACITY 4500 BPH IN 1.5 LITER PET NECK FINISH PLASTIC SCEW PCO 28 MM MOLDS 2 L 47.5 GR, 1.5 L 39.5 GR AND 0.5 L 20.5 GR MAX CO2 CONTENT 8 GR / LITER MAX CONCENTRATE MIX 1:7 ELECTRIC SUPPY 400V +/- 5% 50 HZ +/- 0,5% 3PH+N+PE LIST OF MAIN EQUIPMENT, ALL MADE IN YEAR 2007 BLOW MOLDING MACHINE KOSME KSB 3000 S1 LINEAR BLOW MOLDING MACHINE WITH CAPACITY OF 4500 BPH IN 1.5 LITERS EQUIPPED WITH KOSMATIC FAULTY PET BOTTLE DISCHARGE SYSTEM INCLUDES PREFORM FEEDING SYSTEM AND MTA TAE 051 CHILLER FOR BLOW MOLDER HIGH PRESSURE AIR COMPRESSOR KAESER CSDX 137 WITH HIGH PRESSURE DRYER, MICRO FILTER AND BUFFER TANK PNEUMATIC CONVEYOR KOSME “LT” PET BOTTLE FILLER KOSME ISOBLOCK NH 24/24/6. NECK HANDLING, ISOBARIC FILLING, ALL PARTS AISI 304. 24 RINSING STATIONS WITH SPRAY AND DIP SYSTEM, 24 FILLING NOZZLES AND AROL CAPPER WITH 6 CAPPING HEADS. BOTTLE CONVEYORS TYPE KOSME “FT” AIR DRYER KOSME “AIR 2000” WITH TWO BLOWERS LABELER KOSMR EXTRA HOT MELT 8 T SI 1. WRAPAROUND HOT CLUE LABELER FOR PRECUT PAPER AND PLASTIC LABELS SHRINK WRAPPING MACHINE KOSME WITH SHRINK TUNNEL. PACKAGING FORMATS 3X2 BOTTLES FOR 1.5 AND 2 LITERS AND 3X4 FOR 0.5 LITER BOTTLES MIXER EUROMIX 10 WITH CARBONIZER. DESIGNED TO PRODUCE CARBONATED SOFT DRINKS BY MIXING WATER AND SYRUP AND ADDING CO2. CAPACITY 10 000 LITERS/HOUR, SYRUP-WATER MIXING RATION FROM 3:1 TO 7:1, MAX CO2 8 GR/LITER WATER IONIZING UNIT KOSME “OZOMIX 700” CAPACITY 7000 L/H, MAX PRODUCT TEMP 30C AUTOMATIC CIP LINE KOSME EUROSAN WITH 1 X 2 M3 INSULATED AND 1 X 2 M3 NOT INSULATED TANK. LIQUID CO2 TANK BUSE SEMIAUTOMATIC PALLET STRETCH WRAPPING MACHINE
Vendedor: Domarom Star Srl
Año de construcción: usado
Ubicación: Land-filling line water and csd krones / kosme pet 4500 bph
  
the line was built by kosme (nowadays a part of krones) in 2009. it has been in water filling operation only less than 900 total operating hours and is still installed, powered and can be tested. line is also suitable for carbonated and non-carbonated soft drinks and waters. three sets of molds will be a part of this delivery. this line contains also mixer – carbonator which allows to produce carbonated soft drinks. condition is very good. 
  
main characteristics of this line
  
manufacturer  kosme / krones
manufacturing year    2007
total operating hours  873 hours only
products          waters, csd 
capacity          4500 bph in 1.5 liter pet
neck finish      plastic scew pco 28 mm       
molds  2 l 47.5 gr, 1.5 l 39.5 gr and 0.5 l 20.5 gr 
max co2 content       8 gr / liter
max concentrate mix  1:7 
electric supply            400v +/- 5% 50 hz +/- 0,5% 3ph+n+pe

 FILLING LINE WATER AND CSD KRONES / KOSME PET 4500 BPH THE LINE WAS BUILT BY KOSME (NOWADAYS A PART OF KRONES) IN 2009. IT HAS BEEN IN WATER FILLING OPERATION ONLY LESS THAN 900 TOTAL OPERATING HOURS AND IS STILL INSTALLED, POWERED AND CAN BE TESTED. LINE IS ALSO SUITABLE FOR CARBONATED AND NON-CARBONATED SOFT DRINKS AND WATERS. THREE SETS OF MOLDS WILL BE A PART OF THIS DELIVERY. THIS LINE CONTAINS ALSO MIXER – CARBONATOR WHICH ALLOWS TO PRODUCE CARBONATED SOFT DRINKS. CONDITION IS VERY GOOD. MAIN CHARACTERISTICS OF THIS LINE MANUFACTURER KOSME / KRONES MANUFACTURING YEAR 2007 TOTAL OPERATING HOURS 873 HOURS ONLY PRODUCTS WATERS, CSD CAPACITY 4500 BPH IN 1.5 LITER PET NECK FINISH PLASTIC SCEW PCO 28 MM MOLDS 2 L 47.5 GR, 1.5 L 39.5 GR AND 0.5 L 20.5 GR MAX CO2 CONTENT 8 GR / LITER MAX CONCENTRATE MIX 1:7 ELECTRIC SUPPLY 400V +/- 5% 50 HZ +/- 0,5% 3PH+N+PE
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-high-performance rotary labelling machine with 4 label dispensing units. machine processes self-adhesive labels by rotating the container plates. machine incl. infeed and outfeed conveyor as well as further accessories. HIGH-PERFORMANCE ROTARY LABELLING MACHINE WITH 4 LABEL DISPENSING UNITS. MACHINE PROCESSES SELF-ADHESIVE LABELS BY ROTATING THE CONTAINER PLATES. MACHINE INCL. INFEED AND OUTFEED CONVEYOR AS WELL AS FURTHER ACCESSORIES.
Vendedor: UNIGROUP AG
Año de construcción: usado
Ubicación: Land-krones pet abfüllanlage, leistung 6.000 flaschen / stunde, baujahr 2004, für bier und soft drinks + stille getränke. 1,0 + 1,5 + 2,0 + 2,5 liter.

krones pet filling line, capacity 6.000 bph, year 2004, for beer, csd and still drinks. 1,0 + 1,5 + 2,0 + 2,5 liter bottles. KRONES PET ABFüLLANLAGE, LEISTUNG 6.000 FLASCHEN / STUNDE, BAUJAHR 2004, FüR BIER UND SOFT DRINKS + STILLE GETRäNKE. 1,0 + 1,5 + 2,0 + 2,5 LITER. KRONES PET FILLING LINE, CAPACITY 6.000 BPH, YEAR 2004, FOR BEER, CSD AND STILL DRINKS. 1,0 + 1,5 + 2,0 + 2,5 LITER BOTTLES.
Vendedor: Ebert Technologie GmbH
Año de construcción: usado
Ubicación: Land-kosme ksb 4000 linear reheat stretch blow moulding machine, year 2000

includes:
* lanfranchi preform tipper
* preform hopper/elevator
* infeed rail

the machine was running until march 2017 with a maximum speed of 4000 bottles per hour (1.5l bottles).
it is in very good condition and immediately available
 KOSME KSB 4000 LINEAR REHEAT STRETCH BLOW MOULDING MACHINE, YEAR 2000 INCLUDES: * LANFRANCHI PREFORM TIPPER * PREFORM HOPPER/ELEVATOR * INFEED RAIL THE MACHINE WAS RUNNING UNTIL MARCH 2017 WITH A MAXIMUM SPEED OF 4000 BOTTLES PER HOUR (1.5L BOTTLES). IT IS IN VERY GOOD CONDITION AND IMMEDIATELY AVAILABLE
Vendedor: IPR-PETMachinery
Año de construcción: usado
Ubicación: Land-
sidel aseptic milk pet line for sale
item #:	usm-0072
category:	pet filling lines
status:	ready for shipment
idle assets 	manufacturer	capacity (specify the unit of measure)	year of manufacturing
preform oven	sidel	11200 bph	2000
blower / sbo 8 roue	 	11200bph	2000
filler / 8236 v12 r2 volumeter	 sidel - remy	11201 bph	2000
capper /  euro pk12 heads	sidel - arol	11200bph	2000
conveyors	gebo sorbal	11202 bph	2000
labeller / extra hot melt 504 12ts1e1	kosme	11200bph	 
shrink wrapper / tsp.30.clp	cermex	11203 bph	2000
oven	 	11200bph	2000
palletizer / p421.10	cermex	11204 bph	2000
strech wrapper / helix ms 30	robopac sistemi	11200bph	2000
line is operational & in excellent condition SIDEL ASEPTIC MILK PET LINE FOR SALE ITEM #: USM-0072 CATEGORY: PET FILLING LINES STATUS: READY FOR SHIPMENT IDLE ASSETS MANUFACTURER CAPACITY (SPECIFY THE UNIT OF MEASURE) YEAR OF MANUFACTURING PREFORM OVEN SIDEL 11200 BPH 2000 BLOWER / SBO 8 ROUE 11200BPH 2000 FILLER / 8236 V12 R2 VOLUMETER SIDEL - REMY 11201 BPH 2000 CAPPER / EURO PK12 HEADS SIDEL - AROL 11200BPH 2000 CONVEYORS GEBO SORBAL 11202 BPH 2000 LABELLER / EXTRA HOT MELT 504 12TS1E1 KOSME 11200BPH SHRINK WRAPPER / TSP.30.CLP CERMEX 11203 BPH 2000 OVEN 11200BPH 2000 PALLETIZER / P421.10 CERMEX 11204 BPH 2000 STRECH WRAPPER / HELIX MS 30 ROBOPAC SISTEMI 11200BPH 2000 LINE IS OPERATIONAL & IN EXCELLENT CONDITION
Vendedor: Used Sweden Machines
Año de construcción: usado
Ubicación: Land-pet filling line kosme / krones 7000 bph

this pet line was made in year 1998 / 1999 by kosme for filling carbonated soft drinks at capacity of 7000 bph in 1.5liter containers. the line was in operation till 2015 and it was carefully marked and professionally dismantled in july 2017. the owner made proper cip before dismantling. the line was filling carbonated soft drinks in 0.5 0.75 and 1.5liter pet bottles. attached a set of pictures both before and after dismantling.

note: we have a professional partner who can offer to reinstall and commissioning this line at around 50 000 + all lifting equipment costs – driver+rent- if it will be re-installed one-to-one!

technical specification of pet line kosme 7000 bph:

make: kosme, famix, heuft, kaeser, lanfranchi, logopak, melegari s.p.a.
capacity: 7.000 bottles/h at 1,5l bottle
manufacturing: 1998 / 1999
filling product: water and carbonated soft drinks size: 0,5l, 0,75l and 1,5l (including existing handling parts + moulds)
cap standard: plastic screw capper pco 1810 – 28 mm
consumer packaging: 3 x 2 film (pad possible)
pallet: euro pallet 1.200 x 800 mm
availability: immediately

list of machines:

2 blow moulding machines
blow moulding machine 1: make kosme ksb 4000, year 1999, operating hours: ca. 23.000
blow moulding machine 2: make kosme ksb 4000, year 1999, operating hours: ca. 23.000

one preform-container for both blow moulding machines, 2 elevators, 2 roller sorters

compressor kaeser 2 x ds 171, dryer kaeser td 245, 2 piston compressor

air conveyor lanfranchi, pneumatically adjustable, 6 blowers, control unit siemens s5

mixer famix, year 1998, capacity 12.000 l/h, control unit relay

rinser/füller-bloc make melegari s.p.a., iso jet 40/40/8, year 04/1999, rinser 40-digits, filler 40-sigits, screw capper 8-digits - make arol, pick and place, neck handling, mechanical filling system velcorin-machine make lewa, typ da 922

cap feeding unit melegari, elpne, year 04/1999, with blower

fill level inspector unit heuft, with pusher into container

bottle conveyor with plastic chain, accumulation table, cable tray - performance open basket cable tray control unit siemens s7 300

labelling machine kosme, hotmelt, guard door, direction of rotation r-l, direction standard, douple infeed worm, size 12 bottle table, processing of paper labels, wraparound adhesion with hotmelt

coding unit videojet, year 1999 dating device with ink, at bottle conveyor, diagonal from above on bottle shoulder

packaging machine dimac, starfilm ls c, year 1999, only foil – pad possible, 3-line infeed, processing of printed foil possible

pack conveyor partly roller chain, partly width plastic chain, control unit siemens s7 300

handle applicator make twin pac mge, year 1999 foil and separate labels from a magazine

palletiser kosme/cosma, year 1998, 1-lane infeed below, integrated turning unit, layer pad inserter, roller grouping station, control unit siemens s7 300

pallet stretcher kosme/cosma, year 1998 typ avatbr, system dreharm mit niederhalter

pallet labeler make logopak

pallet conveyor roll and chain, pallet storage unit  PET FILLING LINE KOSME / KRONES 7000 BPH THIS PET LINE WAS MADE IN YEAR 1998 / 1999 BY KOSME FOR FILLING CARBONATED SOFT DRINKS AT CAPACITY OF 7000 BPH IN 1.5LITER CONTAINERS. THE LINE WAS IN OPERATION TILL 2015 AND IT WAS CAREFULLY MARKED AND PROFESSIONALLY DISMANTLED IN JULY 2017. THE OWNER MADE PROPER CIP BEFORE DISMANTLING. THE LINE WAS FILLING CARBONATED SOFT DRINKS IN 0.5 0.75 AND 1.5LITER PET BOTTLES. ATTACHED A SET OF PICTURES BOTH BEFORE AND AFTER DISMANTLING. NOTE: WE HAVE A PROFESSIONAL PARTNER WHO CAN OFFER TO REINSTALL AND COMMISSIONING THIS LINE AT AROUND 50 000 + ALL LIFTING EQUIPMENT COSTS – DRIVER+RENT- IF IT WILL BE RE-INSTALLED ONE-TO-ONE! TECHNICAL SPECIFICATION OF PET LINE KOSME 7000 BPH: MAKE: KOSME, FAMIX, HEUFT, KAESER, LANFRANCHI, LOGOPAK, MELEGARI S.P.A. CAPACITY: 7.000 BOTTLES/H AT 1,5L BOTTLE MANUFACTURING: 1998 / 1999 FILLING PRODUCT: WATER AND CARBONATED SOFT DRINKS SIZE: 0,5L, 0,75L AND 1,5L (INCLUDING EXISTING HANDLING PARTS + MOULDS) CAP STANDARD: PLASTIC SCREW CAPPER PCO 1810 – 28 MM CONSUMER PACKAGING: 3 X 2 FILM (PAD POSSIBLE) PALLET: EURO PALLET 1.200 X 800 MM AVAILABILITY: IMMEDIATELY LIST OF MACHINES: 2 BLOW MOULDING MACHINES BLOW MOULDING MACHINE 1: MAKE KOSME KSB 4000, YEAR 1999, OPERATING HOURS: CA. 23.000 BLOW MOULDING MACHINE 2: MAKE KOSME KSB 4000, YEAR 1999, OPERATING HOURS: CA. 23.000 ONE PREFORM-CONTAINER FOR BOTH BLOW MOULDING MACHINES, 2 ELEVATORS, 2 ROLLER SORTERS COMPRESSOR KAESER 2 X DS 171, DRYER KAESER TD 245, 2 PISTON COMPRESSOR AIR CONVEYOR LANFRANCHI, PNEUMATICALLY ADJUSTABLE, 6 BLOWERS, CONTROL UNIT SIEMENS S5 MIXER FAMIX, YEAR 1998, CAPACITY 12.000 L/H, CONTROL UNIT RELAY RINSER/FüLLER-BLOC MAKE MELEGARI S.P.A., ISO JET 40/40/8, YEAR 04/1999, RINSER 40-DIGITS, FILLER 40-SIGITS, SCREW CAPPER 8-DIGITS - MAKE AROL, PICK AND PLACE, NECK HANDLING, MECHANICAL FILLING SYSTEM VELCORIN-MACHINE MAKE LEWA, TYP DA 922 CAP FEEDING UNIT MELEGARI, ELPNE, YEAR 04/1999, WITH BLOWER FILL LEVEL INSPECTOR UNIT HEUFT, WITH PUSHER INTO CONTAINER BOTTLE CONVEYOR WITH PLASTIC CHAIN, ACCUMULATION TABLE, CABLE TRAY - PERFORMANCE OPEN BASKET CABLE TRAY CONTROL UNIT SIEMENS S7 300 LABELLING MACHINE KOSME, HOTMELT, GUARD DOOR, DIRECTION OF ROTATION R-L, DIRECTION STANDARD, DOUPLE INFEED WORM, SIZE 12 BOTTLE TABLE, PROCESSING OF PAPER LABELS, WRAPAROUND ADHESION WITH HOTMELT CODING UNIT VIDEOJET, YEAR 1999 DATING DEVICE WITH INK, AT BOTTLE CONVEYOR, DIAGONAL FROM ABOVE ON BOTTLE SHOULDER PACKAGING MACHINE DIMAC, STARFILM LS C, YEAR 1999, ONLY FOIL – PAD POSSIBLE, 3-LINE INFEED, PROCESSING OF PRINTED FOIL POSSIBLE PACK CONVEYOR PARTLY ROLLER CHAIN, PARTLY WIDTH PLASTIC CHAIN, CONTROL UNIT SIEMENS S7 300 HANDLE APPLICATOR MAKE TWIN PAC MGE, YEAR 1999 FOIL AND SEPARATE LABELS FROM A MAGAZINE PALLETISER KOSME/COSMA, YEAR 1998, 1-LANE INFEED BELOW, INTEGRATED TURNING UNIT, LAYER PAD INSERTER, ROLLER GROUPING STATION, CONTROL UNIT SIEMENS S7 300 PALLET STRETCHER KOSME/COSMA, YEAR 1998 TYP AVATBR, SYSTEM DREHARM MIT NIEDERHALTER PALLET LABELER MAKE LOGOPAK PALLET CONVEYOR ROLL AND CHAIN, PALLET STORAGE UNIT
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks   COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-kosme 720 9t s2 e2, 2009, l05079001, kosme self adhesive
labeller, 2 station rotary labeller, front and back label application,
nominal speed 9,000bph. includes documentation the label
maximum height is 190mm. label length is relative to bottle
diameter. currently set up to run body and back label on glass
bottles
the labeller was originally formatted for 5 different bottle types as
listed below:
74.6mm diameter x 283.2mm height ±round bottle
73.6mm diameter x 300.4mm height ±round bottle
74.1mm diameter x 295.8mm height ±round bottle
86mm diameter x 315mm height ±round bottle
88.5mm length x 43.5 wide x 198.5mm height - flask KOSME 720 9T S2 E2, 2009, L05079001, KOSME SELF ADHESIVE LABELLER, 2 STATION ROTARY LABELLER, FRONT AND BACK LABEL APPLICATION, NOMINAL SPEED 9,000BPH. INCLUDES DOCUMENTATION THE LABEL MAXIMUM HEIGHT IS 190MM. LABEL LENGTH IS RELATIVE TO BOTTLE DIAMETER. CURRENTLY SET UP TO RUN BODY AND BACK LABEL ON GLASS BOTTLES THE LABELLER WAS ORIGINALLY FORMATTED FOR 5 DIFFERENT BOTTLE TYPES AS LISTED BELOW: 74.6MM DIAMETER X 283.2MM HEIGHT ±ROUND BOTTLE 73.6MM DIAMETER X 300.4MM HEIGHT ±ROUND BOTTLE 74.1MM DIAMETER X 295.8MM HEIGHT ±ROUND BOTTLE 86MM DIAMETER X 315MM HEIGHT ±ROUND BOTTLE 88.5MM LENGTH X 43.5 WIDE X 198.5MM HEIGHT - FLASK
Vendedor: INTER-MAQUINAS AGUILAR S.L
Año de construcción: usado
Ubicación: Land-- direction: r - l 
- capacity: max. 3‘000 btle/h
- self-adhesive labelling stations: 3 
- body label
- back label
- vintage/medallion
- bottle formats: 
  Ø 61.5, 60.9 / 56.9 conic, 78.9 / 72.9 conic, 75.0, 75.5, 76.2 mm
- machine for insertion in a line 
- machine in very good condition
- machine very well maintained
 - DIRECTION: R - L - CAPACITY: MAX. 3‘000 BTLE/H - SELF-ADHESIVE LABELLING STATIONS: 3 - BODY LABEL - BACK LABEL - VINTAGE/MEDALLION - BOTTLE FORMATS: Ø 61.5, 60.9 / 56.9 CONIC, 78.9 / 72.9 CONIC, 75.0, 75.5, 76.2 MM - MACHINE FOR INSERTION IN A LINE - MACHINE IN VERY GOOD CONDITION - MACHINE VERY WELL MAINTAINED
Vendedor: Dreier Oenotech SA
Año de construcción: usado
Precio: 20.000 €
Ubicación: Land-hot melt labeling machine for cylindrical containers

type of labbels: wraparound
type of bottle: 1.5 liters

capacity: 15 000 bph

---
we offer new and used machines. with any further questions, please do not hesitate to contact us.  HOT MELT LABELING MACHINE FOR CYLINDRICAL CONTAINERS TYPE OF LABBELS: WRAPAROUND TYPE OF BOTTLE: 1.5 LITERS CAPACITY: 15 000 BPH --- WE OFFER NEW AND USED MACHINES. WITH ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US.
Vendedor: Jawo Tech s.r.o.
Año de construcción: usado
Ubicación: Land-blowing machine unit, consisting of from 2 kosme ksb blow-moulding machines with a total capacity of up to 10,000 bottles per hour.

2 st. kosme ksb4000 blow moulder
currently, the system is overhauled complete general with warranty

technical data:
number of cavities: 4
bottle volume: 0.1 2.5 l
max bottle diameter: 110 mm
max bottle height: 340 mm
mouth diameter: 28 mm
max capacity: 5,000 r / h

dimensions:
length: 4.590 mm
width: 1700 mm
height: 2,450 mm
weight: 5.400 kg

facilities:
the system is equipped:
1 intermediate bulk containers for storage of preforms for 2 blow moulding machines
the system can be customized and visited with us.
 BLOWING MACHINE UNIT, CONSISTING OF FROM 2 KOSME KSB BLOW-MOULDING MACHINES WITH A TOTAL CAPACITY OF UP TO 10,000 BOTTLES PER HOUR. 2 ST. KOSME KSB4000 BLOW MOULDER CURRENTLY, THE SYSTEM IS OVERHAULED COMPLETE GENERAL WITH WARRANTY TECHNICAL DATA: NUMBER OF CAVITIES: 4 BOTTLE VOLUME: 0.1 2.5 L MAX BOTTLE DIAMETER: 110 MM MAX BOTTLE HEIGHT: 340 MM MOUTH DIAMETER: 28 MM MAX CAPACITY: 5,000 R / H DIMENSIONS: LENGTH: 4.590 MM WIDTH: 1700 MM HEIGHT: 2,450 MM WEIGHT: 5.400 KG FACILITIES: THE SYSTEM IS EQUIPPED: 1 INTERMEDIATE BULK CONTAINERS FOR STORAGE OF PREFORMS FOR 2 BLOW MOULDING MACHINES THE SYSTEM CAN BE CUSTOMIZED AND VISITED WITH US.
Vendedor: ALLFiLL GmbH
Año de construcción: usado
Precio: 139.000 €
Ubicación: Land-kosme ksb4000 blow moulder
2018 completely overhauled general (like new condition), with warranty technical specifications:
number of cavities: 4
bottle volume: 0.1 2.5 l
max bottle diameter: 110 mm
max bottle height: 340 mm
mouth diameter: 28 mm
max capacity: 5,000 r / h

dimensions:
length: 4.590 mm
width: 1.700 mm
height: 2,450 mm
weight: 5.400 kg

facilities:
the system is equipped:
intermediate bulk containers for storage of preforms 
 KOSME KSB4000 BLOW MOULDER 2018 COMPLETELY OVERHAULED GENERAL (LIKE NEW CONDITION), WITH WARRANTY TECHNICAL SPECIFICATIONS: NUMBER OF CAVITIES: 4 BOTTLE VOLUME: 0.1 2.5 L MAX BOTTLE DIAMETER: 110 MM MAX BOTTLE HEIGHT: 340 MM MOUTH DIAMETER: 28 MM MAX CAPACITY: 5,000 R / H DIMENSIONS: LENGTH: 4.590 MM WIDTH: 1.700 MM HEIGHT: 2,450 MM WEIGHT: 5.400 KG FACILITIES: THE SYSTEM IS EQUIPPED: INTERMEDIATE BULK CONTAINERS FOR STORAGE OF PREFORMS
Vendedor: ALLFiLL GmbH
Año de construcción: usado
Ubicación: Land-kosme ksb 2000 wide mouth reheat stretch blow moulding system, year 2002

includes:
* kosme ksb 2000 wm reheat stretch blow moulding machine
– jar preform specific infeed system
– mould chiller

possibility to offer blow moulds for 63mm neck diameter jars (drawings available upon request).

machine can handle up to 89mm neck diameter jar preforms.

system is in good working condition, has been decommissioned late may 2017 and as such cannot be seen in production.  KOSME KSB 2000 WIDE MOUTH REHEAT STRETCH BLOW MOULDING SYSTEM, YEAR 2002 INCLUDES: * KOSME KSB 2000 WM REHEAT STRETCH BLOW MOULDING MACHINE – JAR PREFORM SPECIFIC INFEED SYSTEM – MOULD CHILLER POSSIBILITY TO OFFER BLOW MOULDS FOR 63MM NECK DIAMETER JARS (DRAWINGS AVAILABLE UPON REQUEST). MACHINE CAN HANDLE UP TO 89MM NECK DIAMETER JAR PREFORMS. SYSTEM IS IN GOOD WORKING CONDITION, HAS BEEN DECOMMISSIONED LATE MAY 2017 AND AS SUCH CANNOT BE SEEN IN PRODUCTION.
Vendedor: IPR-PETMachinery
Año de construcción: usado
Ubicación: Land-one gallon pet mineral water bottling line, consisting of:

* kosme ksb 2000 reheat stretch blow moulding machine (2009)
– includes: preform tipper, preform hopper/elevator and infeed sorter.
– mta tae evo 051 mould chiller
– output capacity: 2,160 bph
* sacmi opera 210 empty bottle labeller (2009)
– output capacity: 7,200 bph
* federal mfg co 26.8r1204 filler/capper
– output capacity: 4,560 bph
– with cap feeder
* robert polypro 2149 handle applicator (2010)
– output capacity: 3,240 bph
* kister kayat sw35 case erector
* meypack vp-521 case packer (2004)
– output capacity: 3,000 cases/hr
* kettner krones uni 1n palletizer (2000)
* lantech qauto pallet wrapper (2008)
* various conveyors of the line: bottle conveyors, case conveyors, pallet conveyors
* domino dtx 1000 laser date coder (2015)
* waukesha cherry-burrell 5000 gallon tank (stainless steel)
* united bar code system apl 8100 (2014)
* pai water filtration system, with pacific ozone generator and trojan uvlogic applicator.

many more photos and line layout available upon request.
the line is still installed but not running product. it can be run upon appointment. ONE GALLON PET MINERAL WATER BOTTLING LINE, CONSISTING OF: * KOSME KSB 2000 REHEAT STRETCH BLOW MOULDING MACHINE (2009) – INCLUDES: PREFORM TIPPER, PREFORM HOPPER/ELEVATOR AND INFEED SORTER. – MTA TAE EVO 051 MOULD CHILLER – OUTPUT CAPACITY: 2,160 BPH * SACMI OPERA 210 EMPTY BOTTLE LABELLER (2009) – OUTPUT CAPACITY: 7,200 BPH * FEDERAL MFG CO 26.8R1204 FILLER/CAPPER – OUTPUT CAPACITY: 4,560 BPH – WITH CAP FEEDER * ROBERT POLYPRO 2149 HANDLE APPLICATOR (2010) – OUTPUT CAPACITY: 3,240 BPH * KISTER KAYAT SW35 CASE ERECTOR * MEYPACK VP-521 CASE PACKER (2004) – OUTPUT CAPACITY: 3,000 CASES/HR * KETTNER KRONES UNI 1N PALLETIZER (2000) * LANTECH QAUTO PALLET WRAPPER (2008) * VARIOUS CONVEYORS OF THE LINE: BOTTLE CONVEYORS, CASE CONVEYORS, PALLET CONVEYORS * DOMINO DTX 1000 LASER DATE CODER (2015) * WAUKESHA CHERRY-BURRELL 5000 GALLON TANK (STAINLESS STEEL) * UNITED BAR CODE SYSTEM APL 8100 (2014) * PAI WATER FILTRATION SYSTEM, WITH PACIFIC OZONE GENERATOR AND TROJAN UVLOGIC APPLICATOR. MANY MORE PHOTOS AND LINE LAYOUT AVAILABLE UPON REQUEST. THE LINE IS STILL INSTALLED BUT NOT RUNNING PRODUCT. IT CAN BE RUN UPON APPOINTMENT.
Vendedor: IPR-PETMachinery
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-gluing of oxes kosme. the performance of 1200 boxes per hour. 2005 year. good condition.  GLUING OF OXES KOSME. THE PERFORMANCE OF 1200 BOXES PER HOUR. 2005 YEAR. GOOD CONDITION.
Vendedor: Delta IK
Año de construcción: usado
Precio: 11.000 €
Ubicación: Land-forming boxes kosme. the performance of 1200 boxes per hour. 2001 year. good condition.  FORMING BOXES KOSME. THE PERFORMANCE OF 1200 BOXES PER HOUR. 2001 YEAR. GOOD CONDITION.
Vendedor: Delta IK
Año de construcción: usado
Precio: 14.000 €
Ubicación: Land-stacker box kosme. the performance of 10,000 bottles per hour. 2005 year. good condition.  STACKER BOX KOSME. THE PERFORMANCE OF 10,000 BOTTLES PER HOUR. 2005 YEAR. GOOD CONDITION.
Vendedor: Delta IK
Año de construcción: usado
Precio: 29.000 €
Ubicación: Land-labeling kosme. the performance of 10,000 bottles per hour. 3 positions. self-adhesive. 2005 year. good condition. LABELING KOSME. THE PERFORMANCE OF 10,000 BOTTLES PER HOUR. 3 POSITIONS. SELF-ADHESIVE. 2005 YEAR. GOOD CONDITION.
Vendedor: Delta IK
Año de construcción: usado
Ubicación: Land-self adhesive kosme
model: extra adhesive 720 6t s2 e2
hot melt
year of manufacture: 2000
2 stations: body labels, back labels
clock-wise: right-left
6 saddles
speed: 6.000 b/h
approx. size: 2.5 x2 x2m SELF ADHESIVE KOSME MODEL: EXTRA ADHESIVE 720 6T S2 E2 HOT MELT YEAR OF MANUFACTURE: 2000 2 STATIONS: BODY LABELS, BACK LABELS CLOCK-WISE: RIGHT-LEFT 6 SADDLES SPEED: 6.000 B/H APPROX. SIZE: 2.5 X2 X2M
Vendedor: INTER-MAQUINAS AGUILAR S.L
Año de construcción: usado
Ubicación: Land-from pet plant, for 3.300 bph, adjust to 0,5 lt. bottles, also possible is processing of 0,25 lt. - 2,0 lt. bottles, for sale:
- blow moulding machine, make kosme 3.000, built 2000, for 33.000 €, ex location, as is where is, ex location; already dismantled. FROM PET PLANT, FOR 3.300 BPH, ADJUST TO 0,5 LT. BOTTLES, ALSO POSSIBLE IS PROCESSING OF 0,25 LT. - 2,0 LT. BOTTLES, FOR SALE: - BLOW MOULDING MACHINE, MAKE KOSME 3.000, BUILT 2000, FOR 33.000 €, EX LOCATION, AS IS WHERE IS, EX LOCATION; ALREADY DISMANTLED.
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-- with 2 stations
- capacity: max. 3000 btle/h
- front label
- shoulder label
- smoothing station at the outlet
- outfeed table
- different bottle sizes (Ø 62, 66, 75, 77, 86 mm)
- revised machine
- in very good condition    - WITH 2 STATIONS - CAPACITY: MAX. 3000 BTLE/H - FRONT LABEL - SHOULDER LABEL - SMOOTHING STATION AT THE OUTLET - OUTFEED TABLE - DIFFERENT BOTTLE SIZES (Ø 62, 66, 75, 77, 86 MM) - REVISED MACHINE - IN VERY GOOD CONDITION
Vendedor: Dreier Oenotech SA
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-blow moulding machine  kosme
model ksb 3000
capacity: 4000 b / h
built in 2000   BLOW MOULDING MACHINE KOSME MODEL KSB 3000 CAPACITY: 4000 B / H BUILT IN 2000
Vendedor: B.M.G.e.K
Año de construcción: usado
Ubicación: Land-blowing machine of kosme
type: ksb3000
serial no: 30056
year of manufacturing: 2002
capacity: 3000bph
working hours: 38.000 h
with pco 28 mm neck
inclusive: tipper, preform silo, preform transport, preform feeding system and chiller
the machine which in production until beginning of 2016 (connected with power and can be lakes in production)
inclusive 2 blow mould kits you can choose from:
-1, 0ltr. round bottle
-1 25ltr. round bottle
-1 5ltr. round bottle
-1 5ltr. square bottle
-0, 5ltr. round bottle (design 1)
-0, 5ltr. round bottle (design 2)
-0, 5ltr. square bottle
each additional set is exclusive BLOWING MACHINE OF KOSME TYPE: KSB3000 SERIAL NO: 30056 YEAR OF MANUFACTURING: 2002 CAPACITY: 3000BPH WORKING HOURS: 38.000 H WITH PCO 28 MM NECK INCLUSIVE: TIPPER, PREFORM SILO, PREFORM TRANSPORT, PREFORM FEEDING SYSTEM AND CHILLER THE MACHINE WHICH IN PRODUCTION UNTIL BEGINNING OF 2016 (CONNECTED WITH POWER AND CAN BE LAKES IN PRODUCTION) INCLUSIVE 2 BLOW MOULD KITS YOU CAN CHOOSE FROM: -1, 0LTR. ROUND BOTTLE -1 25LTR. ROUND BOTTLE -1 5LTR. ROUND BOTTLE -1 5LTR. SQUARE BOTTLE -0, 5LTR. ROUND BOTTLE (DESIGN 1) -0, 5LTR. ROUND BOTTLE (DESIGN 2) -0, 5LTR. SQUARE BOTTLE EACH ADDITIONAL SET IS EXCLUSIVE
Vendedor: Kahl & Schlichterle
Año de construcción: usado
Ubicación: Land-labeling machine of kosme adhesive 4 t 2 s e2
-year of construction: 1993
-with 2 stations
-label
-back label
-roll-on station at the outlet
-outfeed table
-various bottle formats
-revised machine
-in very good condition
     LABELING MACHINE OF KOSME ADHESIVE 4 T 2 S E2 -YEAR OF CONSTRUCTION: 1993 -WITH 2 STATIONS -LABEL -BACK LABEL -ROLL-ON STATION AT THE OUTLET -OUTFEED TABLE -VARIOUS BOTTLE FORMATS -REVISED MACHINE -IN VERY GOOD CONDITION
Vendedor: Mazuba GmbH
Año de construcción: usado
Ubicación: Land-2 station for front and against label and neck label.

cold glue.

output: 10.000 bph  2 STATION FOR FRONT AND AGAINST LABEL AND NECK LABEL. COLD GLUE. OUTPUT: 10.000 BPH
Vendedor: INTER-MAQUINAS AGUILAR S.L
Año de construcción: usado
Ubicación: Land-used kosme ksb 3000, 3300 fl./h with 1.5 litre, incl. cooler, preformschuette and preformlader USED KOSME KSB 3000, 3300 FL./H WITH 1.5 LITRE, INCL. COOLER, PREFORMSCHUETTE AND PREFORMLADER
Vendedor: Füllmeister GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-kosme ksb 3000, with 3 tools, achievement approx. 3300 fl/h with 1.5 l KOSME KSB 3000, WITH 3 TOOLS, ACHIEVEMENT APPROX. 3300 FL/H WITH 1.5 L
Vendedor: Füllmeister GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KOSME types: