141 ofertas

Año de construcción: usado
Ubicación: Land-semi-mobile batching plant type gromix m brs, capacity approx. 50 cbm/h, sicoma planet mixer, 4 fold series silo plant per 25 cbm per box, tape loading to the mixer, plc control system on windows based completely in a container installed, heating/hot water in the container

mistakes and intermediate sale reserve, sales from site SEMI-MOBILE BATCHING PLANT TYPE GROMIX M BRS, CAPACITY APPROX. 50 CBM/H, SICOMA PLANET MIXER, 4 FOLD SERIES SILO PLANT PER 25 CBM PER BOX, TAPE LOADING TO THE MIXER, PLC CONTROL SYSTEM ON WINDOWS BASED COMPLETELY IN A CONTAINER INSTALLED, HEATING/HOT WATER IN THE CONTAINER MISTAKES AND INTERMEDIATE SALE RESERVE, SALES FROM SITE
Vendedor: GROMITEC
Año de construcción: usado
Precio: used machinery auction RESALE 29.000 €
Ubicación: Land-weight approx.: 14000 kg<br/>x-travel: 2400 mm<br/>y-travel: 1200 mm<br/>z-travel: 1000 mm<br/>dimensions (l x w x h) approx.: 4500 x 2250 x 4000 mm<br/>description: brown & sharpe pmm-c coordinate measuring machine<br> <br> measuring software hexagon quindos 7 with v7.10.1363-r-7 license<br> <br> table dimensions lxb [in mm] 4100 x 1600 x 4000<br> pass [in mm] 1400 x 1600<br> measuring range: x= 2400 mm, y= 1200 mm, z= 1000 mm<br> allowed x-table load: 2000 kg<br> resolution: 0,05 micrometer<br> max. postioning speed: 400 mm/sec<br> max. acceleration: 3000 mm/sec²<br> <br> touch system:<br> touch frequency 30 points/min<br> max. scan speed 50 mm/sec<br> data rate up to 500 points/sec<br> touch force 0,01 bis 1,2 n, infinitely selectable<br> <br> measurement uncertainty iso 10 360-2:<br> volumetric measurement lenght uncertainty e: 1,8 + l/300 [micrometer]<br> volumetric touch uncertainty r: 1,5 [micrometer]<br> <br> electrical data:<br> operating voltage 208-500 v +/- 10%, 3 pe<br> frequency 50/60 hz<br> rated capacity 2,4 kva<br> average power consumption approx. 600 va inkl. host computer<br> protection of the machine t 16 a<br> <br> compressed air supply:<br> pressure ? 5,5 bar (? 6,5 bar for table load ? 1500 kg)<br> temperature 20 °c +/- 5°c<br> consumption 250 nl/m<br> <br> for futher technical data see pdf file<br> <br> scope of delivery:<br> - technical documentation incl. operating manual<br> - change racks<br> - 7 probe system incl. probes<br> - quindos 7 v7.10.1363-r-7 license<br> <br> the delivery does not include a pc or monitor<br> <br> the coordinate measuring machine will be dismantled and secured in the axis professionally from hexagon metrology gmbh<br> WEIGHT APPROX.: 14000 KG
X-TRAVEL: 2400 MM
Y-TRAVEL: 1200 MM
Z-TRAVEL: 1000 MM
DIMENSIONS (L X W X H) APPROX.: 4500 X 2250 X 4000 MM
DESCRIPTION: BROWN & SHARPE PMM-C COORDINATE MEASURING MACHINE

MEASURING SOFTWARE HEXAGON QUINDOS 7 WITH V7.10.1363-R-7 LICENSE

TABLE DIMENSIONS LXB [IN MM] 4100 X 1600 X 4000
PASS [IN MM] 1400 X 1600
MEASURING RANGE: X= 2400 MM, Y= 1200 MM, Z= 1000 MM
ALLOWED X-TABLE LOAD: 2000 KG
RESOLUTION: 0,05 MICROMETER
MAX. POSTIONING SPEED: 400 MM/SEC
MAX. ACCELERATION: 3000 MM/SEC²

TOUCH SYSTEM:
TOUCH FREQUENCY 30 POINTS/MIN
MAX. SCAN SPEED 50 MM/SEC
DATA RATE UP TO 500 POINTS/SEC
TOUCH FORCE 0,01 BIS 1,2 N, INFINITELY SELECTABLE

MEASUREMENT UNCERTAINTY ISO 10 360-2:
VOLUMETRIC MEASUREMENT LENGHT UNCERTAINTY E: 1,8 + L/300 [MICROMETER]
VOLUMETRIC TOUCH UNCERTAINTY R: 1,5 [MICROMETER]

ELECTRICAL DATA:
OPERATING VOLTAGE 208-500 V +/- 10%, 3 PE
FREQUENCY 50/60 HZ
RATED CAPACITY 2,4 KVA
AVERAGE POWER CONSUMPTION APPROX. 600 VA INKL. HOST COMPUTER
PROTECTION OF THE MACHINE T 16 A

COMPRESSED AIR SUPPLY:
PRESSURE ? 5,5 BAR (? 6,5 BAR FOR TABLE LOAD ? 1500 KG)
TEMPERATURE 20 °C +/- 5°C
CONSUMPTION 250 NL/M

FOR FUTHER TECHNICAL DATA SEE PDF FILE

SCOPE OF DELIVERY:
- TECHNICAL DOCUMENTATION INCL. OPERATING MANUAL
- CHANGE RACKS
- 7 PROBE SYSTEM INCL. PROBES
- QUINDOS 7 V7.10.1363-R-7 LICENSE

THE DELIVERY DOES NOT INCLUDE A PC OR MONITOR

THE COORDINATE MEASURING MACHINE WILL BE DISMANTLED AND SECURED IN THE AXIS PROFESSIONALLY FROM HEXAGON METROLOGY GMBH
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 79.500 €
Ubicación: Land-system professionally deinstalled 
mx 240 tube replaced december 2016 
goc5 console
software: 
cardiq snapshot, cardiac filter, ecg trace, smartscore
smart prep, smart speed, connect pro, patient 64 slice
power 440, direct 3d, vari viewer, helical tilt, vct highpower
neurofilter, automa, data export  SYSTEM PROFESSIONALLY DEINSTALLED MX 240 TUBE REPLACED DECEMBER 2016 GOC5 CONSOLE SOFTWARE: CARDIQ SNAPSHOT, CARDIAC FILTER, ECG TRACE, SMARTSCORE SMART PREP, SMART SPEED, CONNECT PRO, PATIENT 64 SLICE POWER 440, DIRECT 3D, VARI VIEWER, HELICAL TILT, VCT HIGHPOWER NEUROFILTER, AUTOMA, DATA EXPORT
Vendedor: Block Imaging International
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 600 x 300 x 300 mm<br/>description: sp4 standard parallign seam clamp was developed to quickly clamp and align solid surface materials in near perfect alignment<br> connecting two powerful venturi vacuum pods with precision linear bearings accomplish this<br> perfectly clamped seams with a minimum amount of time and effort<br> operates with shop air or a small portable air compressor, runs at 90psi<br> aligns surfaces as well as clamps seams<br> for further information see photos<br> WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 300 X 300 MM
DESCRIPTION: SP4 STANDARD PARALLIGN SEAM CLAMP WAS DEVELOPED TO QUICKLY CLAMP AND ALIGN SOLID SURFACE MATERIALS IN NEAR PERFECT ALIGNMENT
CONNECTING TWO POWERFUL VENTURI VACUUM PODS WITH PRECISION LINEAR BEARINGS ACCOMPLISH THIS
PERFECTLY CLAMPED SEAMS WITH A MINIMUM AMOUNT OF TIME AND EFFORT
OPERATES WITH SHOP AIR OR A SMALL PORTABLE AIR COMPRESSOR, RUNS AT 90PSI
ALIGNS SURFACES AS WELL AS CLAMPS SEAMS
FOR FURTHER INFORMATION SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-baier long abkantmaschine mod. bending master - bmh 8000-2 / bj. 78 / 8000 x 2 mm / automatic bending / 8 professional program - pnc control bms 131 / 2 compartment foot switch / 8 piece cylinder cheek / 8 pcs support loschen / good condition fe.gi.maschinen@sbg.at

baier long bending machine mod bending master - bmh 8000-2 / year 8000 x 2 mm/78 / automatic bending / 8 tray program - pnc control bms 131 / 2 tray foot switch / 8 pieces clamping cylinder / 8 pieces support holes / good condition
fe.gi.maschinen.sbg.at BAIER LONG ABKANTMASCHINE MOD. BENDING MASTER - BMH 8000-2 / BJ. 78 / 8000 X 2 MM / AUTOMATIC BENDING / 8 PROFESSIONAL PROGRAM - PNC CONTROL BMS 131 / 2 COMPARTMENT FOOT SWITCH / 8 PIECE CYLINDER CHEEK / 8 PCS SUPPORT LOSCHEN / GOOD CONDITION FE.GI.MASCHINEN@SBG.AT BAIER LONG BENDING MACHINE MOD BENDING MASTER - BMH 8000-2 / YEAR 8000 X 2 MM/78 / AUTOMATIC BENDING / 8 TRAY PROGRAM - PNC CONTROL BMS 131 / 2 TRAY FOOT SWITCH / 8 PIECES CLAMPING CYLINDER / 8 PIECES SUPPORT HOLES / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-table length:3000 mm<br/>table width:1500 mm<br/>table height:200 mm<br/>weight of the machine ca.:1,6 t<br/><br/> TABLE LENGTH:3000 MM
TABLE WIDTH:1500 MM
TABLE HEIGHT:200 MM
WEIGHT OF THE MACHINE CA.:1,6 T

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-faro gage power mounted on cart with granite slab (90x60x10cm). 
accessories:
granite plate 50x25cm
portable measuring foot
renishaw measuring sensor with sample test rig 2 x tp20 measuring ball d = 2 mm, 3 mm, 6mmkegelspitze
measuring heads with kali beer tool ball d = 3 mm, 6 mm
kali beer ball d = 25 mm with certificate (10/2018)
various fixing and clamping tools
sw and doongle FARO GAGE POWER MOUNTED ON CART WITH GRANITE SLAB (90X60X10CM). ACCESSORIES: GRANITE PLATE 50X25CM PORTABLE MEASURING FOOT RENISHAW MEASURING SENSOR WITH SAMPLE TEST RIG 2 X TP20 MEASURING BALL D = 2 MM, 3 MM, 6MMKEGELSPITZE MEASURING HEADS WITH KALI BEER TOOL BALL D = 3 MM, 6 MM KALI BEER BALL D = 25 MM WITH CERTIFICATE (10/2018) VARIOUS FIXING AND CLAMPING TOOLS SW AND DOONGLE
Vendedor: CITech AG
Año de construcción: usado
Ubicación: Land-table length:2400 mm<br/>table width:1200 mm<br/>table height:200 mm<br/>weight of the machine ca.:1,0 t<br/><br/> TABLE LENGTH:2400 MM
TABLE WIDTH:1200 MM
TABLE HEIGHT:200 MM
WEIGHT OF THE MACHINE CA.:1,0 T

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Precio: 48.600 €
Ubicación: Land-whole body 64 slice ct scanner, professionally deinstalled
system sn s0009, gantry sn ka17719001 
software revision v1.80 (service pack 1.11) with dicom q/r, mwm
mcs7070hp tube replaced august 2017 (currently <130,000 scan seconds)
72kw generator type ct-wg-70 (dom 2015) WHOLE BODY 64 SLICE CT SCANNER, PROFESSIONALLY DEINSTALLED SYSTEM SN S0009, GANTRY SN KA17719001 SOFTWARE REVISION V1.80 (SERVICE PACK 1.11) WITH DICOM Q/R, MWM MCS7070HP TUBE REPLACED AUGUST 2017 (CURRENTLY <130,000 SCAN SECONDS) 72KW GENERATOR TYPE CT-WG-70 (DOM 2015)
Vendedor: Block Imaging International
Año de construcción: usado
Ubicación: Land-table length:3000 mm<br/>table width:1500 mm<br/>table height:200 mm<br/>weight of the machine ca.:1,55 t<br/><br/> TABLE LENGTH:3000 MM
TABLE WIDTH:1500 MM
TABLE HEIGHT:200 MM
WEIGHT OF THE MACHINE CA.:1,55 T

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-offer this press (stamping press) to be seen here!

control cabinet is separated from the machine (unprofessional severed cable)
ask for still photos on request!

the press is ca from bj 2012 tel 0176 27 44 64 14 offer requested! OFFER THIS PRESS (STAMPING PRESS) TO BE SEEN HERE! CONTROL CABINET IS SEPARATED FROM THE MACHINE (UNPROFESSIONAL SEVERED CABLE) ASK FOR STILL PHOTOS ON REQUEST! THE PRESS IS CA FROM BJ 2012 TEL 0176 27 44 64 14 OFFER REQUESTED!
Vendedor: Herr Venjacob
Año de construcción: usado
Ubicación: Land-table length:2400 mm<br/>table width:1200 mm<br/>table height:200 mm<br/>weight of the machine ca.:1,0 t<br/><br/> TABLE LENGTH:2400 MM
TABLE WIDTH:1200 MM
TABLE HEIGHT:200 MM
WEIGHT OF THE MACHINE CA.:1,0 T

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-core d20a, lathe comes from a training workshop (total 3 machines are available of this type) state very well, with
guard / not cleaned off and glass scales and digital display of mitutoyo, central lubrication system, guided tours and refinished, dovetail guides at the flat after scraped, set games.
mechanics tested new, paint, chip wall back, chip tray below, guard with emergency off, tailstock, 3 jaw chuck, little water, chuck key, lighting
tip height 200 mm, centre distance 1000 mm, max.drehdurchmesser 600 mm, over bed 420 mm, over carriage bed width 260 mm, 300 mm,.
sale only to professionals
used, tested - so how you is, can be tested under power and visited
under exclusion of any warranty and guarantee there second-hand machine

free loading on trucks from location, shipment arrangement, placement and set up on request possible
available immediately CORE D20A, LATHE COMES FROM A TRAINING WORKSHOP (TOTAL 3 MACHINES ARE AVAILABLE OF THIS TYPE) STATE VERY WELL, WITH GUARD / NOT CLEANED OFF AND GLASS SCALES AND DIGITAL DISPLAY OF MITUTOYO, CENTRAL LUBRICATION SYSTEM, GUIDED TOURS AND REFINISHED, DOVETAIL GUIDES AT THE FLAT AFTER SCRAPED, SET GAMES. MECHANICS TESTED NEW, PAINT, CHIP WALL BACK, CHIP TRAY BELOW, GUARD WITH EMERGENCY OFF, TAILSTOCK, 3 JAW CHUCK, LITTLE WATER, CHUCK KEY, LIGHTING TIP HEIGHT 200 MM, CENTRE DISTANCE 1000 MM, MAX.DREHDURCHMESSER 600 MM, OVER BED 420 MM, OVER CARRIAGE BED WIDTH 260 MM, 300 MM,. SALE ONLY TO PROFESSIONALS USED, TESTED - SO HOW YOU IS, CAN BE TESTED UNDER POWER AND VISITED UNDER EXCLUSION OF ANY WARRANTY AND GUARANTEE THERE SECOND-HAND MACHINE FREE LOADING ON TRUCKS FROM LOCATION, SHIPMENT ARRANGEMENT, PLACEMENT AND SET UP ON REQUEST POSSIBLE AVAILABLE IMMEDIATELY
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Ubicación: Land-cutting capacity: 4300 mm x 4300 mm.<br/>sawblade height: 125 mm.<br/>main motor 13,5 kw / scoring motor 2,2 kw<br/>saw-carriage speed: 1-150 m/min. returnspeed 150 m/min.<br/>programm fence speed: 90 m/min (limited to 25 m/min)<br/>7 grippers, centers 75/275/475/1075/1825/2625/3425 mm.<br/>machine control: cadmatic 4 – professional<br/>hardware: windows xp (us) tft display<br/>software showing cutting plans 2-d/3-d, graphic malfunction diagnostics by video.<br/><br/>econolift:<br/>automatic panel feed through a front-mounted lifting table <br/>plate dimensions max. 4200 x 2200 mm<br/>max load: 7 tons<br/>construction year 2002 CUTTING CAPACITY: 4300 MM X 4300 MM.
SAWBLADE HEIGHT: 125 MM.
MAIN MOTOR 13,5 KW / SCORING MOTOR 2,2 KW
SAW-CARRIAGE SPEED: 1-150 M/MIN. RETURNSPEED 150 M/MIN.
PROGRAMM FENCE SPEED: 90 M/MIN (LIMITED TO 25 M/MIN)
7 GRIPPERS, CENTERS 75/275/475/1075/1825/2625/3425 MM.
MACHINE CONTROL: CADMATIC 4 – PROFESSIONAL
HARDWARE: WINDOWS XP (US) TFT DISPLAY
SOFTWARE SHOWING CUTTING PLANS 2-D/3-D, GRAPHIC MALFUNCTION DIAGNOSTICS BY VIDEO.

ECONOLIFT:
AUTOMATIC PANEL FEED THROUGH A FRONT-MOUNTED LIFTING TABLE
PLATE DIMENSIONS MAX. 4200 X 2200 MM
MAX LOAD: 7 TONS
CONSTRUCTION YEAR 2002
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-cover fp2, compl. disassembled and overhauled, condition like new paint new, mechanics kplt. tested and reconditioned, table planed, stripper, can bellows new (y), chuck sk40 s20, glass scale surcharge still installs, free loaded from site
sale only to professionals COVER FP2, COMPL. DISASSEMBLED AND OVERHAULED, CONDITION LIKE NEW PAINT NEW, MECHANICS KPLT. TESTED AND RECONDITIONED, TABLE PLANED, STRIPPER, CAN BELLOWS NEW (Y), CHUCK SK40 S20, GLASS SCALE SURCHARGE STILL INSTALLS, FREE LOADED FROM SITE SALE ONLY TO PROFESSIONALS
Vendedor: R.S.E cnc Maschinenservice
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.060 €
Ubicación: Land-we offer for sale: used pallet racks,

manufacturer: jungheinrich type: b

scope of delivery: for 84 pitches

15 stand, height approx. 2,250 x 1,100 mm

56 runs, approx. 1,900 x k130 mm

112 pins for trusses

30 ground anchor m 12 mm

technical data:

shelf height of 2,250 mm

shelf depth 1,100 mm

payload field 6,000 kg

load capacity per 3,000 kg pair of traverse

manufacturer jungheinrich type: b

blue border color

color of the bars yellow
 

shipping:
cheaper shipping with several low-cost carriers can. 

please ask the freight specifying your postcode and location, as well as the desired quantity.

the eth ericus transport - u. handelsges. m.b.h exclusively used pallet racks to professionally installed offers you
a testing stand according to din en 15635.

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

eth professional shelf since 1983. 
WE OFFER FOR SALE: USED PALLET RACKS, MANUFACTURER: JUNGHEINRICH TYPE: B SCOPE OF DELIVERY: FOR 84 PITCHES 15 STAND, HEIGHT APPROX. 2,250 X 1,100 MM 56 RUNS, APPROX. 1,900 X K130 MM 112 PINS FOR TRUSSES 30 GROUND ANCHOR M 12 MM TECHNICAL DATA: SHELF HEIGHT OF 2,250 MM SHELF DEPTH 1,100 MM PAYLOAD FIELD 6,000 KG LOAD CAPACITY PER 3,000 KG PAIR OF TRAVERSE MANUFACTURER JUNGHEINRICH TYPE: B BLUE BORDER COLOR COLOR OF THE BARS YELLOW SHIPPING: CHEAPER SHIPPING WITH SEVERAL LOW-COST CARRIERS CAN. PLEASE ASK THE FREIGHT SPECIFYING YOUR POSTCODE AND LOCATION, AS WELL AS THE DESIRED QUANTITY. THE ETH ERICUS TRANSPORT - U. HANDELSGES. M.B.H EXCLUSIVELY USED PALLET RACKS TO PROFESSIONALLY INSTALLED OFFERS YOU A TESTING STAND ACCORDING TO DIN EN 15635. WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.700 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 2400 x 800 x 1400 mm<br/>description: lot of 5 new tool trolleys, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 800 X 1400 MM
DESCRIPTION: LOT OF 5 NEW TOOL TROLLEYS, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.300 €
Ubicación: Land- we offer for sale:

pallet racks for 960 sites

manufacturer: euro stock

material:

19 uprights, approx. 6,200 x 1,000 mm

69 uprights, approx. 7,000 x 1,000 mm

480 traverses approximately 2,900 x k140 mm

960 pins 176 ground anchor m 12 mm

technical data:

frame elevation 6,200-7.000 mm

shelf depth 1000 mm

load range 933 kg

payload field 8,500 kg

payload specialist 2,800 kg

frame blue

beams blue

in stock: 21698 harsefeld

we offer a comprehensive range of new and used racks and accessories and assist in your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983.  WE OFFER FOR SALE: PALLET RACKS FOR 960 SITES MANUFACTURER: EURO STOCK MATERIAL: 19 UPRIGHTS, APPROX. 6,200 X 1,000 MM 69 UPRIGHTS, APPROX. 7,000 X 1,000 MM 480 TRAVERSES APPROXIMATELY 2,900 X K140 MM 960 PINS 176 GROUND ANCHOR M 12 MM TECHNICAL DATA: FRAME ELEVATION 6,200-7.000 MM SHELF DEPTH 1000 MM LOAD RANGE 933 KG PAYLOAD FIELD 8,500 KG PAYLOAD SPECIALIST 2,800 KG FRAME BLUE BEAMS BLUE IN STOCK: 21698 HARSEFELD WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND ASSIST IN YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.300 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 2400 x 1600 x 1400 mm<br/>description: lot of 10 new tool trolleys, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 1600 X 1400 MM
DESCRIPTION: LOT OF 10 NEW TOOL TROLLEYS, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-diesel generator power plant 119 mw with wartsila 7x18v46 hfo

this 119 mw power plant (iso condition) was delivered by wartsila in year 2002, operation started in 2003 and it has 7 x 18v46 diesel engines running on heavy fuel oil (hfo) at 500 rpm coupled with abb made brushless synchronous 11 kv / 50 hz alternators. i has been in operated under ppa and engines have been operated around 60 000 hours in base load power production. this power plant is designed and build by wartsila utilizing their highly standardized functional module delivery. operation and maintenance works were carried out strictly in accordance with wartsila manuals. the plant was professionally dismantled in 2017 and before dismantling 60 000 hour major overhauled was carried out to all engines. during the operation no any unexpected breakdowns has happened. delivery contains complete functioning power plant equipment with 110 kv switchyard equipment. buildings and tanks can be discussed but are not a part of our standard offering.

main plant characteristics at current site conditions:

power output iso from alternators: 119 mw at 110 kv / 50 hz
engines: 7 x 18v46 - 500 rpm
alternators: abb amg 1600 ss12 dseb self-cooled, brushless, synchronous
power factor: 0.8
efficiency: 0.97 (at rated output, 50 hz and power factor 0.8)
voltage: 11 000 v, with adjustment range +5 - 10%
frequency: 50 hz +/-5%
fuel consumption gross: 8290 - 8330 kj/kwh (43.4 to 43.2 % efficiency)
lube oil consumption: 0.7 g/kwh
cooling system: closed loop radiator cooling
fuel oil: hfo viscosity max 380 cst / 50 °c   DIESEL GENERATOR POWER PLANT 119 MW WITH WARTSILA 7X18V46 HFO THIS 119 MW POWER PLANT (ISO CONDITION) WAS DELIVERED BY WARTSILA IN YEAR 2002, OPERATION STARTED IN 2003 AND IT HAS 7 X 18V46 DIESEL ENGINES RUNNING ON HEAVY FUEL OIL (HFO) AT 500 RPM COUPLED WITH ABB MADE BRUSHLESS SYNCHRONOUS 11 KV / 50 HZ ALTERNATORS. I HAS BEEN IN OPERATED UNDER PPA AND ENGINES HAVE BEEN OPERATED AROUND 60 000 HOURS IN BASE LOAD POWER PRODUCTION. THIS POWER PLANT IS DESIGNED AND BUILD BY WARTSILA UTILIZING THEIR HIGHLY STANDARDIZED FUNCTIONAL MODULE DELIVERY. OPERATION AND MAINTENANCE WORKS WERE CARRIED OUT STRICTLY IN ACCORDANCE WITH WARTSILA MANUALS. THE PLANT WAS PROFESSIONALLY DISMANTLED IN 2017 AND BEFORE DISMANTLING 60 000 HOUR MAJOR OVERHAULED WAS CARRIED OUT TO ALL ENGINES. DURING THE OPERATION NO ANY UNEXPECTED BREAKDOWNS HAS HAPPENED. DELIVERY CONTAINS COMPLETE FUNCTIONING POWER PLANT EQUIPMENT WITH 110 KV SWITCHYARD EQUIPMENT. BUILDINGS AND TANKS CAN BE DISCUSSED BUT ARE NOT A PART OF OUR STANDARD OFFERING. MAIN PLANT CHARACTERISTICS AT CURRENT SITE CONDITIONS: POWER OUTPUT ISO FROM ALTERNATORS: 119 MW AT 110 KV / 50 HZ ENGINES: 7 X 18V46 - 500 RPM ALTERNATORS: ABB AMG 1600 SS12 DSEB SELF-COOLED, BRUSHLESS, SYNCHRONOUS POWER FACTOR: 0.8 EFFICIENCY: 0.97 (AT RATED OUTPUT, 50 HZ AND POWER FACTOR 0.8) VOLTAGE: 11 000 V, WITH ADJUSTMENT RANGE +5 - 10% FREQUENCY: 50 HZ +/-5% FUEL CONSUMPTION GROSS: 8290 - 8330 KJ/KWH (43.4 TO 43.2 % EFFICIENCY) LUBE OIL CONSUMPTION: 0.7 G/KWH COOLING SYSTEM: CLOSED LOOP RADIATOR COOLING FUEL OIL: HFO VISCOSITY MAX 380 CST / 50 °C
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-labeling machine krones contiroll hs 966-24, year 2012
 
this krones contiroll roll feed sleever has been used for three years before it was professionally dismantled, packaged for transportation and placed in a warehouse. it makes wrap-around plastic labels glued with two narrow strips of hotmelt glue on both ends of the label. labels are fed on two rolls and change from one to another roll is automatic. the machine is in very good condition, safely stored and ready for shipment. it has been used for wrap around label up to 45 000 bph using 20 oz hot fill vitamin water.
 
the equipment has following features:
 
- parallel configuration u (infeed and outfeed on same side)
- bottle orientation by vision system
- motorized bottle tabels, using servo motors
- cutting system plates using servo motor
- label lengths of between 172 mm and 640 mm can be handled with one labeling station
- motorized double reels with automatic splicing of the label webs during reel change-over
- all label transfers are done by vacuum grip system
- replaceable hot melt gluing unit
 
manufacturer: krones
type: contiroll hs 960-24 roll feed
manufactured in: 2012
type/serial: 810+764
capacity max: 750 bpm (45.000 bph)
container material: pet
running hours: approx 22.000
power / voltage: 460/266 v - 60 hz   LABELING MACHINE KRONES CONTIROLL HS 966-24, YEAR 2012 THIS KRONES CONTIROLL ROLL FEED SLEEVER HAS BEEN USED FOR THREE YEARS BEFORE IT WAS PROFESSIONALLY DISMANTLED, PACKAGED FOR TRANSPORTATION AND PLACED IN A WAREHOUSE. IT MAKES WRAP-AROUND PLASTIC LABELS GLUED WITH TWO NARROW STRIPS OF HOTMELT GLUE ON BOTH ENDS OF THE LABEL. LABELS ARE FED ON TWO ROLLS AND CHANGE FROM ONE TO ANOTHER ROLL IS AUTOMATIC. THE MACHINE IS IN VERY GOOD CONDITION, SAFELY STORED AND READY FOR SHIPMENT. IT HAS BEEN USED FOR WRAP AROUND LABEL UP TO 45 000 BPH USING 20 OZ HOT FILL VITAMIN WATER. THE EQUIPMENT HAS FOLLOWING FEATURES: - PARALLEL CONFIGURATION U (INFEED AND OUTFEED ON SAME SIDE) - BOTTLE ORIENTATION BY VISION SYSTEM - MOTORIZED BOTTLE TABELS, USING SERVO MOTORS - CUTTING SYSTEM PLATES USING SERVO MOTOR - LABEL LENGTHS OF BETWEEN 172 MM AND 640 MM CAN BE HANDLED WITH ONE LABELING STATION - MOTORIZED DOUBLE REELS WITH AUTOMATIC SPLICING OF THE LABEL WEBS DURING REEL CHANGE-OVER - ALL LABEL TRANSFERS ARE DONE BY VACUUM GRIP SYSTEM - REPLACEABLE HOT MELT GLUING UNIT MANUFACTURER: KRONES TYPE: CONTIROLL HS 960-24 ROLL FEED MANUFACTURED IN: 2012 TYPE/SERIAL: 810+764 CAPACITY MAX: 750 BPM (45.000 BPH) CONTAINER MATERIAL: PET RUNNING HOURS: APPROX 22.000 POWER / VOLTAGE: 460/266 V - 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-machine type machining center - universal make dmg type dmu 70 v year 2000 control type cnc storage france country of origin germany delivery immediately cargo base ex work technical details
x way 750 mm y-way 600 mm z-way 520 mm table size 㸠700 x 500 mm spindle retainer for sk 40 spindle speeds - variable 20-10,000 rpm feeds - longitudinal/transverse/vertical 20,000 mm / min rapid traverse 50 m/min tool changer 32 tool length of maximum tool weight of 315 mm ma x 6 table load of max 0.35 t machine weight kg approx. 7 d additional information
cnc heidenhain tnc 430
 magazine 32 professional sk 40 10000 rpm
 under current MACHINE TYPE MACHINING CENTER - UNIVERSAL MAKE DMG TYPE DMU 70 V YEAR 2000 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS X WAY 750 MM Y-WAY 600 MM Z-WAY 520 MM TABLE SIZE &ATILDE;&CEDIL; 700 X 500 MM SPINDLE RETAINER FOR SK 40 SPINDLE SPEEDS - VARIABLE 20-10,000 RPM FEEDS - LONGITUDINAL/TRANSVERSE/VERTICAL 20,000 MM / MIN RAPID TRAVERSE 50 M/MIN TOOL CHANGER 32 TOOL LENGTH OF MAXIMUM TOOL WEIGHT OF 315 MM MA X 6 TABLE LOAD OF MAX 0.35 T MACHINE WEIGHT KG APPROX. 7 D ADDITIONAL INFORMATION CNC HEIDENHAIN TNC 430 MAGAZINE 32 PROFESSIONAL SK 40 10000 RPM UNDER CURRENT
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 905005
number: 1 pcs.
manufacturer: traub
type: tnc 65 dgy
control: traub tx 8f
year of construction: 1996 (2011)
state of preservation: second-hand machine
machine a (hours): 18,500
stories about: 1 layers

description

turning

maximum turning diameter 300 mm
maximum turning length 450 mm
maximum swing over bed cover 480 mm
maximum chuck diameter 175 mm
max speed main spindle 5600 1/min
maximum performance main spindle in ed 10-40 / 100% 18.5 kw
main spindle spindle passage 65 mm
spindle flange size a6 main spindle
axes on the main spindle unit c
hollow clamping cylinder to the main spindle
maximum rotation speed 5600 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 11 kw
spindle passage sub-spindle 65 mm
spindle flange size counter spindle a6
axis counter spindle unit v/c
travel in v counter spindle unit 520 mm
maximum rapid traverse speed v counter spindle unit 30 m / min
coolant through the spindle
werkstã¼ckausstosser in the counter spindle

turret top
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the revolver x/y/z axes
travel in x/y/z 140/70/450 mm
maximum rapid traverse in x/y/z 15/6/30 m / min

gun down
number of stations of which powered 10/10
tool holder in the turret vdi 30
speed tool drive 4000 1/min
the turret of x/z axes
travel in x/y/z 140 /-/ 450 mm
maximum rapid traverse in x/y/z 15 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
hinged belt chip conveyor
machine is / was operated with emulsion
coolant system
the belt of part of
precast acceptance facility
bar loader/bar feeder traub stamag dn 61

general technical data

total power consumption 49 kva
machine dimensions (lxwxh) approx. 2562 x 1969 x 1790 mm
machine weight approx. 6500 kg

comment

the engine was overhauled 2011 completely professionally and was since less than single shift operation.
we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 905005 NUMBER: 1 PCS. MANUFACTURER: TRAUB TYPE: TNC 65 DGY CONTROL: TRAUB TX 8F YEAR OF CONSTRUCTION: 1996 (2011) STATE OF PRESERVATION: SECOND-HAND MACHINE MACHINE A (HOURS): 18,500 STORIES ABOUT: 1 LAYERS DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 300 MM MAXIMUM TURNING LENGTH 450 MM MAXIMUM SWING OVER BED COVER 480 MM MAXIMUM CHUCK DIAMETER 175 MM MAX SPEED MAIN SPINDLE 5600 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 18.5 KW MAIN SPINDLE SPINDLE PASSAGE 65 MM SPINDLE FLANGE SIZE A6 MAIN SPINDLE AXES ON THE MAIN SPINDLE UNIT C HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM ROTATION SPEED 5600 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 11 KW SPINDLE PASSAGE SUB-SPINDLE 65 MM SPINDLE FLANGE SIZE COUNTER SPINDLE A6 AXIS COUNTER SPINDLE UNIT V/C TRAVEL IN V COUNTER SPINDLE UNIT 520 MM MAXIMUM RAPID TRAVERSE SPEED V COUNTER SPINDLE UNIT 30 M / MIN COOLANT THROUGH THE SPINDLE WERKST&ATILDE;&FRAC14;CKAUSSTOSSER IN THE COUNTER SPINDLE TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE REVOLVER X/Y/Z AXES TRAVEL IN X/Y/Z 140/70/450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15/6/30 M / MIN GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 10/10 TOOL HOLDER IN THE TURRET VDI 30 SPEED TOOL DRIVE 4000 1/MIN THE TURRET OF X/Z AXES TRAVEL IN X/Y/Z 140 /-/ 450 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 15 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA HINGED BELT CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION COOLANT SYSTEM THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER TRAUB STAMAG DN 61 GENERAL TECHNICAL DATA TOTAL POWER CONSUMPTION 49 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 2562 X 1969 X 1790 MM MACHINE WEIGHT APPROX. 6500 KG COMMENT THE ENGINE WAS OVERHAULED 2011 COMPLETELY PROFESSIONALLY AND WAS SINCE LESS THAN SINGLE SHIFT OPERATION. WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-miter bandsaw behringer

hbp 263 g-type

year of manufacture 2004

cutting diameter: 260 mm

blade length: 4640 mm

cutting width: 400 x 260 mm

material height: 800 mm

band saw blade dimensions: 4640 x 34 x 1,1 mm

miter cuts / + degree :-30 + 60 â° c

cutting speed: 20-140 m / min

power: 4,0 kw

microschmiereinrichtung

machine weight approx.: 1.5 t

mechanical length stop with roller conveyor 4 m

feed roller 6 m
the offer is aimed exclusively at professionals in the sense of ⧠14bgb
no sales to private! MITER BANDSAW BEHRINGER HBP 263 G-TYPE YEAR OF MANUFACTURE 2004 CUTTING DIAMETER: 260 MM BLADE LENGTH: 4640 MM CUTTING WIDTH: 400 X 260 MM MATERIAL HEIGHT: 800 MM BAND SAW BLADE DIMENSIONS: 4640 X 34 X 1,1 MM MITER CUTS / + DEGREE :-30 + 60 &ACIRC;&DEG; C CUTTING SPEED: 20-140 M / MIN POWER: 4,0 KW MICROSCHMIEREINRICHTUNG MACHINE WEIGHT APPROX.: 1.5 T MECHANICAL LENGTH STOP WITH ROLLER CONVEYOR 4 M FEED ROLLER 6 M THE OFFER IS AIMED EXCLUSIVELY AT PROFESSIONALS IN THE SENSE OF &ACIRC;&SECT; 14BGB NO SALES TO PRIVATE!
Vendedor: Jens Kürschner Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 370 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 800 mm<br/>description: new, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 800 MM
DESCRIPTION: NEW, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-box washer is designed for semi-automatic washing kistenów and wooden containers, standard. the use of washers in the process helps to reduce the consumption of water, detergent and energy. once the toll is one case has, the process consists of successive stages automatically washing and rinsing.
high performance and power washing, in conjunction with a professional detergent washing guarantee receipt of the highest quality cleaning items in the continuous washing system with closed circuit washing and rinsing, and technological transfer. thanks to the use of high-pressure fans and to optimize the construction of drying tunnel, it is possible to achieve best drying effects in continuous movement. using additional regulation of flows it is possible to economical setting machines for minimize the consumption of water, energy and detergents.   BOX WASHER IS DESIGNED FOR SEMI-AUTOMATIC WASHING KISTENóW AND WOODEN CONTAINERS, STANDARD. THE USE OF WASHERS IN THE PROCESS HELPS TO REDUCE THE CONSUMPTION OF WATER, DETERGENT AND ENERGY. ONCE THE TOLL IS ONE CASE HAS, THE PROCESS CONSISTS OF SUCCESSIVE STAGES AUTOMATICALLY WASHING AND RINSING. HIGH PERFORMANCE AND POWER WASHING, IN CONJUNCTION WITH A PROFESSIONAL DETERGENT WASHING GUARANTEE RECEIPT OF THE HIGHEST QUALITY CLEANING ITEMS IN THE CONTINUOUS WASHING SYSTEM WITH CLOSED CIRCUIT WASHING AND RINSING, AND TECHNOLOGICAL TRANSFER. THANKS TO THE USE OF HIGH-PRESSURE FANS AND TO OPTIMIZE THE CONSTRUCTION OF DRYING TUNNEL, IT IS POSSIBLE TO ACHIEVE BEST DRYING EFFECTS IN CONTINUOUS MOVEMENT. USING ADDITIONAL REGULATION OF FLOWS IT IS POSSIBLE TO ECONOMICAL SETTING MACHINES FOR MINIMIZE THE CONSUMPTION OF WATER, ENERGY AND DETERGENTS.
Vendedor: Machine-For-Sale.com
Año de construcción: usado
Precio: used machinery auction RESALE 1.700 €
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 2400 x 800 x 1400 mm<br/>description: lot of 5 new tool trolleys, comprehensive of tools and accessories as shown in the picture WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 800 X 1400 MM
DESCRIPTION: LOT OF 5 NEW TOOL TROLLEYS, COMPREHENSIVE OF TOOLS AND ACCESSORIES AS SHOWN IN THE PICTURE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 24 €
Ubicación: Land-we offer for sale:

pallet rack accessories

used tie-bars

manufacturer: bito

yr0iig
suitable for the rack system bito pro frame 2012

1 traverse/mat, about 3,600 x pt 120 mm

2 locking pins

-500 piece from stock available 21698 harsefeld

technical data:

maximum load per 3.100 kg pair of traverse

manufacturer: bito type: pro

color of the bars blue

cheaper shipping with several low-cost carriers can.

please ask the freight specifying your postcode and location, as well as the desired quantity.

we offer a comprehensive range of new and used racks and accessories and we can assist in your planning.

we offer new and used pallet racks, en 15635 withstanding scrutiny according to din.

eth professional shelf since 1983.
WE OFFER FOR SALE: PALLET RACK ACCESSORIES USED TIE-BARS MANUFACTURER: BITO YR0IIG SUITABLE FOR THE RACK SYSTEM BITO PRO FRAME 2012 1 TRAVERSE/MAT, ABOUT 3,600 X PT 120 MM 2 LOCKING PINS -500 PIECE FROM STOCK AVAILABLE 21698 HARSEFELD TECHNICAL DATA: MAXIMUM LOAD PER 3.100 KG PAIR OF TRAVERSE MANUFACTURER: BITO TYPE: PRO COLOR OF THE BARS BLUE CHEAPER SHIPPING WITH SEVERAL LOW-COST CARRIERS CAN. PLEASE ASK THE FREIGHT SPECIFYING YOUR POSTCODE AND LOCATION, AS WELL AS THE DESIRED QUANTITY. WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND WE CAN ASSIST IN YOUR PLANNING. WE OFFER NEW AND USED PALLET RACKS, EN 15635 WITHSTANDING SCRUTINY ACCORDING TO DIN. ETH PROFESSIONAL SHELF SINCE 1983.
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Precio: used machinery auction RESALE 25 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 1000 x 600 x 1110 mm<br/>description: portable pneumatic machinery WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 1000 X 600 X 1110 MM
DESCRIPTION: PORTABLE PNEUMATIC MACHINERY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tray shrink wrapper variopac tfs-60, year 2002

this shrink wrapping machine was delivered by kettner in 2002. it has been used for 0.5 liter glass bottles on a carton tray and wrap it in to shrink wrapped plastic film with the capacity of 60 cycles per hour or 42 000 bph. the equipment is currently dismantled and packed professionally by a khs contractor. it is in good condition, ready for immediate relocation.

made by kettner gmbh
model variopac tfs-60
year of commission 2002
serial number 8803026
capacity 60 cycle per minute / 42 000 bph
packing configuration: 3 x 4 bottle trays
material stainless steel
size of bottles used 0.5 liter glass
voltage and frequency 3 x 380 v - 50 hz   TRAY SHRINK WRAPPER VARIOPAC TFS-60, YEAR 2002 THIS SHRINK WRAPPING MACHINE WAS DELIVERED BY KETTNER IN 2002. IT HAS BEEN USED FOR 0.5 LITER GLASS BOTTLES ON A CARTON TRAY AND WRAP IT IN TO SHRINK WRAPPED PLASTIC FILM WITH THE CAPACITY OF 60 CYCLES PER HOUR OR 42 000 BPH. THE EQUIPMENT IS CURRENTLY DISMANTLED AND PACKED PROFESSIONALLY BY A KHS CONTRACTOR. IT IS IN GOOD CONDITION, READY FOR IMMEDIATE RELOCATION. MADE BY KETTNER GMBH MODEL VARIOPAC TFS-60 YEAR OF COMMISSION 2002 SERIAL NUMBER 8803026 CAPACITY 60 CYCLE PER MINUTE / 42 000 BPH PACKING CONFIGURATION: 3 X 4 BOTTLE TRAYS MATERIAL STAINLESS STEEL SIZE OF BOTTLES USED 0.5 LITER GLASS VOLTAGE AND FREQUENCY 3 X 380 V - 50 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 240 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 600 x 800 x 600  mm<br/>description: esab compact 315 e welding device<br> <br> professional, welding power 50a/15v - 315a/30v WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 800 X 600 MM
DESCRIPTION: ESAB COMPACT 315 E WELDING DEVICE

PROFESSIONAL, WELDING POWER 50A/15V - 315A/30V
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-keg filling unit for 5 liter party - keg, semiautomatic esau hueber 110 kph
 
this keg filler is semiautomatic with 3 filling heads, handtmann mms micro filtration system and cap closing unit manufactured in 2007 and hardy used and it was dismantled in year 2012 - the equipment was in excellent condition when dismantled professionally and placed in a container. the line has filling capacity of 110 kegs / hour. the empty and clean keg is placed manually onto filler and lifted manually back to the transport belt once filled. the sensor recognizes placed keg and starts filling automatically, a probe sensor in return air channel controls the filling level. the equipment purges kegs with co2 for air removal and them pressurizes the keg. the beer valve and return valve are opened simultaneously and the keg will be filled from bottom to top. once filled, the kegs will moved to closing unit and further along the transport belt ready for packaging. beer filling system includes micro filtration system for for high efficiency separation of particles and microorganism by multi-layer filter sheets made of cellulose and diatomaceous.
 
manufacturer: esau & hueber gmbh, germany
made in year: 2007
capacity: 110 pieces of 5 litres kegs / hour
filling unit: esau & hueber semi-fill with 3 filling heads
cap closing unit: esau & hueber ser semiautomatic
beer filtration: handtmann mms 070 - capacity 30 hl / h
control system: siemens simatic s7-300   KEG FILLING UNIT FOR 5 LITER PARTY - KEG, SEMIAUTOMATIC ESAU HUEBER 110 KPH THIS KEG FILLER IS SEMIAUTOMATIC WITH 3 FILLING HEADS, HANDTMANN MMS MICRO FILTRATION SYSTEM AND CAP CLOSING UNIT MANUFACTURED IN 2007 AND HARDY USED AND IT WAS DISMANTLED IN YEAR 2012 - THE EQUIPMENT WAS IN EXCELLENT CONDITION WHEN DISMANTLED PROFESSIONALLY AND PLACED IN A CONTAINER. THE LINE HAS FILLING CAPACITY OF 110 KEGS / HOUR. THE EMPTY AND CLEAN KEG IS PLACED MANUALLY ONTO FILLER AND LIFTED MANUALLY BACK TO THE TRANSPORT BELT ONCE FILLED. THE SENSOR RECOGNIZES PLACED KEG AND STARTS FILLING AUTOMATICALLY, A PROBE SENSOR IN RETURN AIR CHANNEL CONTROLS THE FILLING LEVEL. THE EQUIPMENT PURGES KEGS WITH CO2 FOR AIR REMOVAL AND THEM PRESSURIZES THE KEG. THE BEER VALVE AND RETURN VALVE ARE OPENED SIMULTANEOUSLY AND THE KEG WILL BE FILLED FROM BOTTOM TO TOP. ONCE FILLED, THE KEGS WILL MOVED TO CLOSING UNIT AND FURTHER ALONG THE TRANSPORT BELT READY FOR PACKAGING. BEER FILLING SYSTEM INCLUDES MICRO FILTRATION SYSTEM FOR FOR HIGH EFFICIENCY SEPARATION OF PARTICLES AND MICROORGANISM BY MULTI-LAYER FILTER SHEETS MADE OF CELLULOSE AND DIATOMACEOUS. MANUFACTURER: ESAU & HUEBER GMBH, GERMANY MADE IN YEAR: 2007 CAPACITY: 110 PIECES OF 5 LITRES KEGS / HOUR FILLING UNIT: ESAU & HUEBER SEMI-FILL WITH 3 FILLING HEADS CAP CLOSING UNIT: ESAU & HUEBER SER SEMIAUTOMATIC BEER FILTRATION: HANDTMANN MMS 070 - CAPACITY 30 HL / H CONTROL SYSTEM: SIEMENS SIMATIC S7-300
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-baz hurco vmx50t

!!! feed and not while vise!

-4905 spindle hours
-traverse path x/y/z 1270/660/610
-spindle sk50 8000 u/min
-30 professional tool changer - internal coolant
-spindle probe renishaw
-incl. approx. 30-40 iso50 shots
-dxf import
 BAZ HURCO VMX50T !!! FEED AND NOT WHILE VISE! -4905 SPINDLE HOURS -TRAVERSE PATH X/Y/Z 1270/660/610 -SPINDLE SK50 8000 U/MIN -30 PROFESSIONAL TOOL CHANGER - INTERNAL COOLANT -SPINDLE PROBE RENISHAW -INCL. APPROX. 30-40 ISO50 SHOTS -DXF IMPORT
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-for the professional processing of wood or wood-like surfaces.

features:
1 combined grinding unit with:
-an automatically serving, profiled
steel contact roller with grain size compensation
to calibrate, 160 mm diameter
-an electronically controlled
limb pressure bar segment width 35 mm,.
for fine grinding
-cutting speed 18 m/s.
-80 mm wide grinding usage (felt 0.55)
-belt feed with infinitely variable feed speed, 2.5-13 m / min
-pneum.. belt tension with integrated belt edge compensation
-touch-screen display with 125 free programmable memory locations
-consistent workpiece infeed height by
adjustment of the upper part of the machine
-plate (900 mm) folding, with role
-finish brush spout side

technical data:
working width: 1350 mm
workpiece infeed height: 900 mm
tape exchange page links
workpiece thickness of 3-160 mm
belt width: 1370 mm
belt length: 2150 mm
operating voltage: 400 v / 50 hz
drive motor unit: 15 kw
dust nozzle:
1 x dm 180 mm (unit 1)
suction capacity: about 1,830 m â³/h FOR THE PROFESSIONAL PROCESSING OF WOOD OR WOOD-LIKE SURFACES. FEATURES: 1 COMBINED GRINDING UNIT WITH: -AN AUTOMATICALLY SERVING, PROFILED STEEL CONTACT ROLLER WITH GRAIN SIZE COMPENSATION TO CALIBRATE, 160 MM DIAMETER -AN ELECTRONICALLY CONTROLLED LIMB PRESSURE BAR SEGMENT WIDTH 35 MM,. FOR FINE GRINDING -CUTTING SPEED 18 M/S. -80 MM WIDE GRINDING USAGE (FELT 0.55) -BELT FEED WITH INFINITELY VARIABLE FEED SPEED, 2.5-13 M / MIN -PNEUM.. BELT TENSION WITH INTEGRATED BELT EDGE COMPENSATION -TOUCH-SCREEN DISPLAY WITH 125 FREE PROGRAMMABLE MEMORY LOCATIONS -CONSISTENT WORKPIECE INFEED HEIGHT BY ADJUSTMENT OF THE UPPER PART OF THE MACHINE -PLATE (900 MM) FOLDING, WITH ROLE -FINISH BRUSH SPOUT SIDE TECHNICAL DATA: WORKING WIDTH: 1350 MM WORKPIECE INFEED HEIGHT: 900 MM TAPE EXCHANGE PAGE LINKS WORKPIECE THICKNESS OF 3-160 MM BELT WIDTH: 1370 MM BELT LENGTH: 2150 MM OPERATING VOLTAGE: 400 V / 50 HZ DRIVE MOTOR UNIT: 15 KW DUST NOZZLE: 1 X DM 180 MM (UNIT 1) SUCTION CAPACITY: ABOUT 1,830 M &ACIRC;&SUP3;/H
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 100 €
Ubicación: Land-we bought long stocks 383 pcs. fluorescent tubes from a stock of spare parts, new, which we offer here:
black light, uv fluorescent tubes, cold white, ex protected fluorescent tubes, tanning lamps, studio lamps, fly fishing lamps, etc.

the lights are in the retail package!

on a photo you will find 18 types and their prices. we have determined the lowest market price.
want to buy a position we will give you - 40% on the market price.
would you buy the complete packet we will give you - 60% on the market price, that are € 1076.
minimum sales amount € 100
 
1) 32 pcs. fluorescent black light, f15t12/350bl/500/ph, d38x380mm, sylvania
2) 20 pcs. uv fluorescent lamps with shatter protection f20w / 350bl, d38x590mm, sylvania
3) 20 fluorescent tube, tlk 40w/05, d38x590mm, philips
4) 25 pcs. cool white fluorescent lamp tl-d 18w 840 super 80 master d28x590mm, philips
5) 25 pcs. black light fluorescent, sylvania, f15w/t8/bl, d26x450mm
6) 28 pcs. cool white fluorescent lamp, master tl-d 36w / 840 / 2 l, d28x1200mm, philips
7) 32 pcs. fluorescent lamp tl-m40w/83rs, d38x1200mm, philips
8) 43 pcs. fluorescent lamp, tl40w-33, d38x1200mm, philips
9) 7 pcs. ex-protected cool white fluorescent lamp, l40w/640 xl, d38x1200mm, osram
10) 23 pcs. solarium lamp, studio light, professional 100w-r, d38x1760mm, philips
11) 29 stk. solarium tubes turbo power plus r 160 watts, d38x1760mm, soltron
12) 14 pcs. cool white fluorescent lamp, lumilux l30w/21-840, d26x790mm, osram
13) 25 pcs. daylight-white fluorescent lamp, lumilux de luxe, l36w/954-1, d26x1200mm, osram
14) 30 pcs. cool white fluorescent lamp, lumilux fh28w/840, d16x1150mm, osram
15) 9 pcs. cool white fluorescent lamp, lumilux l36w / 21 x, d26x1200mm, osram
16) 9 ex protected long life lights, super ex 58w-4100, d26x1480, ceag
18) 5 pcs. tld fly fishing lamp 15w/05, d28x437mm, philips
(19) 7 pcs. fluorescent green, tl-d 18w/17, d27x590mm, philips

  WE BOUGHT LONG STOCKS 383 PCS. FLUORESCENT TUBES FROM A STOCK OF SPARE PARTS, NEW, WHICH WE OFFER HERE: BLACK LIGHT, UV FLUORESCENT TUBES, COLD WHITE, EX PROTECTED FLUORESCENT TUBES, TANNING LAMPS, STUDIO LAMPS, FLY FISHING LAMPS, ETC. THE LIGHTS ARE IN THE RETAIL PACKAGE! ON A PHOTO YOU WILL FIND 18 TYPES AND THEIR PRICES. WE HAVE DETERMINED THE LOWEST MARKET PRICE. WANT TO BUY A POSITION WE WILL GIVE YOU - 40% ON THE MARKET PRICE. WOULD YOU BUY THE COMPLETE PACKET WE WILL GIVE YOU - 60% ON THE MARKET PRICE, THAT ARE € 1076. MINIMUM SALES AMOUNT € 100 1) 32 PCS. FLUORESCENT BLACK LIGHT, F15T12/350BL/500/PH, D38X380MM, SYLVANIA 2) 20 PCS. UV FLUORESCENT LAMPS WITH SHATTER PROTECTION F20W / 350BL, D38X590MM, SYLVANIA 3) 20 FLUORESCENT TUBE, TLK 40W/05, D38X590MM, PHILIPS 4) 25 PCS. COOL WHITE FLUORESCENT LAMP TL-D 18W 840 SUPER 80 MASTER D28X590MM, PHILIPS 5) 25 PCS. BLACK LIGHT FLUORESCENT, SYLVANIA, F15W/T8/BL, D26X450MM 6) 28 PCS. COOL WHITE FLUORESCENT LAMP, MASTER TL-D 36W / 840 / 2 L, D28X1200MM, PHILIPS 7) 32 PCS. FLUORESCENT LAMP TL-M40W/83RS, D38X1200MM, PHILIPS 8) 43 PCS. FLUORESCENT LAMP, TL40W-33, D38X1200MM, PHILIPS 9) 7 PCS. EX-PROTECTED COOL WHITE FLUORESCENT LAMP, L40W/640 XL, D38X1200MM, OSRAM 10) 23 PCS. SOLARIUM LAMP, STUDIO LIGHT, PROFESSIONAL 100W-R, D38X1760MM, PHILIPS 11) 29 STK. SOLARIUM TUBES TURBO POWER PLUS R 160 WATTS, D38X1760MM, SOLTRON 12) 14 PCS. COOL WHITE FLUORESCENT LAMP, LUMILUX L30W/21-840, D26X790MM, OSRAM 13) 25 PCS. DAYLIGHT-WHITE FLUORESCENT LAMP, LUMILUX DE LUXE, L36W/954-1, D26X1200MM, OSRAM 14) 30 PCS. COOL WHITE FLUORESCENT LAMP, LUMILUX FH28W/840, D16X1150MM, OSRAM 15) 9 PCS. COOL WHITE FLUORESCENT LAMP, LUMILUX L36W / 21 X, D26X1200MM, OSRAM 16) 9 EX PROTECTED LONG LIFE LIGHTS, SUPER EX 58W-4100, D26X1480, CEAG 18) 5 PCS. TLD FLY FISHING LAMP 15W/05, D28X437MM, PHILIPS (19) 7 PCS. FLUORESCENT GREEN, TL-D 18W/17, D27X590MM, PHILIPS
Vendedor: IPV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-the cy270n is the perfect universal band saw for every metal worker, artisan, or other professionals.

-the machine is suitable for the cutting of steel, stainless steel and aluminium profiles.
-blade - page guide each 6-set of ball bearings
blade back guide set of ball bearings
-manometer for belt tension
-ergonomic handle
electrical kã¼hlmittellpumpe
-hydrauliches lowering the saw frame (adjustable)
-automatic shut-off
-2 reversible saw speeds
-with sturdy pedestal

data
connection voltage 400 v
motor power 1100 w
coolant pump 100 w
weight approx. 190 kg
machine dimensions lxdxh 1430 x 720 x 1700 mm
cutting speeds 45 + 90 m / min
band saw blade dimensions 2480 x 27 x 0,9 mm
working height 910 mm
cutting capacity round 90 â° and 225 mm
cutting capacity 90 â° 200 x 200 mm square
section flat 90 â° 245 x 150 mm
cutting area around 45â° 160 mm
section square 45 â° 160 x 160 mm
cutting area around 60 â° 100 mm
cutting range, square 60 â° 100 x 100 mm

scope of delivery:
bi metal saw strip
workpiece stop THE CY270N IS THE PERFECT UNIVERSAL BAND SAW FOR EVERY METAL WORKER, ARTISAN, OR OTHER PROFESSIONALS. -THE MACHINE IS SUITABLE FOR THE CUTTING OF STEEL, STAINLESS STEEL AND ALUMINIUM PROFILES. -BLADE - PAGE GUIDE EACH 6-SET OF BALL BEARINGS BLADE BACK GUIDE SET OF BALL BEARINGS -MANOMETER FOR BELT TENSION -ERGONOMIC HANDLE ELECTRICAL K&ATILDE;&FRAC14;HLMITTELLPUMPE -HYDRAULICHES LOWERING THE SAW FRAME (ADJUSTABLE) -AUTOMATIC SHUT-OFF -2 REVERSIBLE SAW SPEEDS -WITH STURDY PEDESTAL DATA CONNECTION VOLTAGE 400 V MOTOR POWER 1100 W COOLANT PUMP 100 W WEIGHT APPROX. 190 KG MACHINE DIMENSIONS LXDXH 1430 X 720 X 1700 MM CUTTING SPEEDS 45 + 90 M / MIN BAND SAW BLADE DIMENSIONS 2480 X 27 X 0,9 MM WORKING HEIGHT 910 MM CUTTING CAPACITY ROUND 90 &ACIRC;&DEG; AND 225 MM CUTTING CAPACITY 90 &ACIRC;&DEG; 200 X 200 MM SQUARE SECTION FLAT 90 &ACIRC;&DEG; 245 X 150 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 160 MM SECTION SQUARE 45 &ACIRC;&DEG; 160 X 160 MM CUTTING AREA AROUND 60 &ACIRC;&DEG; 100 MM CUTTING RANGE, SQUARE 60 &ACIRC;&DEG; 100 X 100 MM SCOPE OF DELIVERY: BI METAL SAW STRIP WORKPIECE STOP
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 145.000 €
Ubicación: Land- 
machine type machining center - vertical make hurco type vmx 64 i year 2016 control type cnc storage customer country of origin taiwan delivery immediately free cargo base loaded trucks from site technical details

x trail 1625 mm y route 860 mm z-way 760 mm table size 1700 x 900 mm control wimax spindle speed 12000 rpm spindle motor 19 kw spindle torque 295 nm magazine capacity 40 pcs 
recording sk 40 inner coolant supply 20 cash used vertical machining center with double arm tool changer.

-control wimax - helicoidal immersion
-double arm tool changer bt 40 40 professional - pocket milling with islands
 -internal coolant with band filter system 20 bar
 renishaw probe MACHINE TYPE MACHINING CENTER - VERTICAL MAKE HURCO TYPE VMX 64 I YEAR 2016 CONTROL TYPE CNC STORAGE CUSTOMER COUNTRY OF ORIGIN TAIWAN DELIVERY IMMEDIATELY FREE CARGO BASE LOADED TRUCKS FROM SITE TECHNICAL DETAILS X TRAIL 1625 MM Y ROUTE 860 MM Z-WAY 760 MM TABLE SIZE 1700 X 900 MM CONTROL WIMAX SPINDLE SPEED 12000 RPM SPINDLE MOTOR 19 KW SPINDLE TORQUE 295 NM MAGAZINE CAPACITY 40 PCS RECORDING SK 40 INNER COOLANT SUPPLY 20 CASH USED VERTICAL MACHINING CENTER WITH DOUBLE ARM TOOL CHANGER. -CONTROL WIMAX - HELICOIDAL IMMERSION -DOUBLE ARM TOOL CHANGER BT 40 40 PROFESSIONAL - POCKET MILLING WITH ISLANDS -INTERNAL COOLANT WITH BAND FILTER SYSTEM 20 BAR RENISHAW PROBE
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 360 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 980 x 460 x 770 mm<br/>description: static resistance 650 kg. distributed weight. integrated ergonomic handle within the worktop. polypropylene worktop. central locking with two reversible keys providing security. anti-shock protection on all four corners. optimized storage compatible with the fixman modular storage system. full extension ball bearing drawer sliders open and close easier. drawer release mechanism incorporated within the handle, to prevent accidental drawe operating. heavy duty wheels. 125 mm diameter for easy crossing of obstacles. non-protruding wheels for easy manoeuvring around the workshop. two fixed wheels and two castors, one with brake. WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 460 X 770 MM
DESCRIPTION: STATIC RESISTANCE 650 KG. DISTRIBUTED WEIGHT. INTEGRATED ERGONOMIC HANDLE WITHIN THE WORKTOP. POLYPROPYLENE WORKTOP. CENTRAL LOCKING WITH TWO REVERSIBLE KEYS PROVIDING SECURITY. ANTI-SHOCK PROTECTION ON ALL FOUR CORNERS. OPTIMIZED STORAGE COMPATIBLE WITH THE FIXMAN MODULAR STORAGE SYSTEM. FULL EXTENSION BALL BEARING DRAWER SLIDERS OPEN AND CLOSE EASIER. DRAWER RELEASE MECHANISM INCORPORATED WITHIN THE HANDLE, TO PREVENT ACCIDENTAL DRAWE OPERATING. HEAVY DUTY WHEELS. 125 MM DIAMETER FOR EASY CROSSING OF OBSTACLES. NON-PROTRUDING WHEELS FOR EASY MANOEUVRING AROUND THE WORKSHOP. TWO FIXED WHEELS AND TWO CASTORS, ONE WITH BRAKE.
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)