124 ofertas

Año de construcción: 2004
Ubicación: Land-pl PL 93320 Lodz, Sarmacka 8/25
Vendedor: PaGaPlast

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 2004 Control/controller: MC 4 Clamping force/clamping force: 110 to Holmabstand/Dist.Betw.Tiebars: 470 mm x 470 mm Disk size/platen size: 745 x 745 mm WZ height/mould hight: min 300 mm Opening/opening stroke: 600 mm Plate distance of max/Max open daylight: 900 mm Auger/screw size: 40 mm Stroke volume/shot volume: 204 CC / 185 gram PS Spritzdr / injection pressure: 1860 bar General / General engine power: 18.5 kW Heating/heating power: 12 kW Dimensions/dimensions: 4.2 m x 1.5 m x 2.2 m Weight/weight: 5800 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 EUROMAP more

Año de construcción: 1995
Ubicación: Complast
Vendedor: Complast Gmbh

screw size:35 mm injection shot weight in Polysterol:142 g clamping force:1100 kN : INJECTION UNIT: screw size:35 mm max. swept volumne:156 cm³ injection shot weight in Polysterol:142 g/PS injection pressure:2.159 bar : CLAMPING UNIT: clamping force:110 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm center hole:125/175 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch Manual:deutsch : EQUIPMENT: robot interface:Euromap 12 core pull:1 x : OTHER DATAS: pump drive power:18,5 kW total connection power:29,5 kW total weight:8.000 kg dimension L x W x H:4,5 x 1,6 x 2,2 m standard Terms of payment: 100 % prior to delivery more

Año de construcción: 2002
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

warehouse no.: 502659 manufacturer: KRAUSS MAFFEI Typ: KM 420-1900 C2 Controller Unit: MC 4 year of construction: 2002 technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 4200 kN distance between tie bars h: 800 mm distance between tie bars v: 800 mm size of mould plates h: 1270 mm size of mould plates v: 1200 mm min. mould height: 580 mm max. open daylight: 1600 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centring device diameter of moving platen: 200 mm centring device diameter of fixed platen: 200 mm mould weight: 6700 kg technical data:i ... more

Año de construcción: 1996
Ubicación: Vorlauf
Vendedor: Complast Gmbh

screw size:40 mm injection shot weight in Polysterol:185 g clamping force:1250 kN : INJECTION UNIT:--- screw size:40 mm max. swept volumne:204 cm³ injection shot weight in Polysterol:185 g/PS injection pressure:1.860 bar : CLAMPING UNIT:--- clamping force:125 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Ja core pull:2 x : OTHER DATAS: pump drive power:18,5 kW total connection power:31,5 kW total weight:5.800 kg dimension L x W x H:4,2 x 1,3 x 2,2 m Terms of payment: 50 % with order, 50 % prior to delivery more

Año de construcción: 1999
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

warehouse no.: 502310 manufacturer: KRAUSS MAFFEI Typ: KM 30-220 C Controller Unit: MC 4 year of construction: 1999 technical data: Clamping unit clamping force: 300 kN distance between tie bars h: 320 mm distance between tie bars v: 320 mm size of mould plates h: 540 mm size of mould plates v: 540 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm technical data:injection unit screw diameter: 25 mm swept volume: 52 ccm injection pressure: 2500 bar equipment included ? CEE-socket 16A ? core pulling hydraulically 1x ? air valve 1x ? machine without material hopper ? Anti vibration mounts ? Schuko-socket 10A ? machine incl. wate ... more

Año de construcción: 1999
Ubicación: Vorlauf
Vendedor: Complast Gmbh

screw size:50 mm injection shot weight in Polysterol:393 g clamping force:1500 kN : INJECTION UNIT: screw size:50 mm max. swept volumne:432 cm³ injection shot weight in Polysterol:393 g/PS injection pressure:2.304 bar : CLAMPING UNIT: clamping force:150 t tie bar distance:500 x 500 mm mould hight min.:300 mm opening stroke:900 mm : CONTROL: microprocessor control:MC4 screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Euromap 12 core pull:2 x : OTHER DATAS: pump drive power:22,0 kW total connection power:35,0 kW total weight:7.600 kg dimension L x W x H:5,0 x 1,5 x 2,2 m Terms of payment: 100% prior to delivery more

Año de construcción: 2003
Ubicación: Land-de DE 52070 Aachen, Jülicher Str. 336
Vendedor: EuropNet GmbH

Year: 2003 Control unit: MC4 Injection Unit: .../1000 Screw diameter: 55 mm Injection pressure: 1904 bar Injection volume: 523 ccm Shot capacity: 476 g Clamping Unit: 200/... Clamping force: 200 t Platen size: 915 x 910 mm Distance between tie bars: 560 x 560 mm Mould height: 350 mm Opening storke: 700 mm Max.Daylight: 1050 mm Ejector stroke: 200 mm Drive power of the hydraulic pump: 37 kW Cylinder heating power: 18 kW General information: Delivery time: November Machine dimensions(m) LxWxH: 5,35x 1,90 x 2,25 m Weight: 10550 kg Equipment: - 1 x Pneumatic valve - 1 x Core pulls - Quality package - Increased oil cooler - Mecanic interface Eur ... more

Año de construcción: 1996
Ubicación: Complast
Vendedor: Complast Gmbh

screw size:80 mm injection shot weight in Polysterol:1304 g clamping force:3500 kN : INJECTION UNIT: screw size:80 mm max. swept volumne:1.433 cm³ injection shot weight in Polysterol:1.304 g/PS injection pressure:1.829 bar CLAMPING UNIT: clamping force:350 t tie bar distance:710 x 710 mm mould hight min.:380 mm mould height max.: mm opening stroke:920 mm CONTROL: microprocessor control:MC3-F screen text:deutsch / german Manual:deutsch / german EQUIPMENT: robot interface:Euromap 12 core pull:4 x OTHER DATAS: pump drive power:75,0 kW total connection power:111,0 kW total weight:19.000 kg dimension L x W x H:6,91 x 2,37 x 2,5 m Paymment: 100% prior to delivery more

Año de construcción: 2003
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Max. injection pressure: 2025bar, screw diameter: 30mm, max. injection weight: 96.5g, closing force: 500kN, horizontal/ vertical distance between tie bars: 320mm, max. daylight: 200mm, max. plate distance: 550mm, centering diameter: 125mm, ejector thread: M16, controls: MC4, operational hours: 42.000h. more

Año de construcción: 2000
Ubicación: Complast - Pegnitz
Vendedor: Complast Gmbh

screw size:55 mm injection shot weight in Polysterol:476 g clamping force:1500 kN : INJECTION UNIT: screw size:55 mm max. swept volumne:523 cm³ injection shot weight in Polysterol:476 g/PS injection pressure:1.904 bar : CLAMPING UNIT: clamping force:150 t tie bar distance:500 x 500 mm mould hight min.:300 mm opening stroke:900 mm : CONTROL: microprocessor control:MC4 screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Euromap 12 core pull:2 x : OTHER DATAS: pump drive power:22,0 kW total connection power:35,0 kW total weight:7.600 kg dimension L x W x H:5,0 x 1,5 x 2,2 m Terms of payment: 100% prior to delivery more

Año de construcción: 2002
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12047 Manufacturer Krauss Maffei Machine type KM 1600-14700 MC Year of manufacture 2002 Site Eschweiler Control type 4 MC Teletext in German Hours of operation 75000 h Delivery time immediately Price on request Technical details Clamping unit Clamping force of 16000 kN Tool opening force, max. 1109 kN 177 kN open driving force moving plate 153 kN close driving force moving plate Mounting plate (h x v) 2500 x 2110 mm Clear width (h x v) 1800 x 1400 mm Tool unclamping stroke 2500 mm Mould installation height min. 900 mm Mould installation height max. 1600 mm Opening width 3400 mm Injection unit Screw diameter 120 mm Ls/D ratio 22 Injection pressure 2266 ba ... more

Año de construcción: 2000
Ubicación: Complast - Pegnitz
Vendedor: Complast Gmbh

screw size:45 mm injection shot weight in Polysterol:250 g clamping force:800 kN : INJECTION UNIT: screw size:45 mm max. swept volumne:275 cm³ injection shot weight in Polysterol:250 g/PS injection pressure:1.878 bar CLAMPING UNIT: clamping force:80 t tie bar distance:405 x 405 mm mould hight min.:250 mm opening stroke:500 mm centering ejector plate:125 mm centering nozzleplate:125 mm CONTROL: microprocessor control:MC4 screen text:deutsch / german Manual:deutsch / german EQUIPMENT: robot interface:Euromap 12 core drawing:2 x OTHER DATAS: Total Heating Capacity:11,0 kW total connection power:29,5 kW total weight:3.500 kg dimension L x W x H:4,1 x 1.4 x 2,1 m Terms of payment: 100 % prior t ... more

Año de construcción: usado
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12046 Manufacturer Krauss Maffei Machine type KM 800-5700 MC Year of manufacture 2002 Site Eschweiler Control type 4 MC Teletext in German Hours of operation 75000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 8000 kN Tool opening force, max. 503 kN 99 kN open driving force moving plate 92 kN close driving force moving plate (H x v) plate 1600 x 1510 mm 1120 x 1000 mm clear width (h x v) Tool unclamping stroke 1400 mm Mould installation height min. 600 mm Mould installation height max. 1100 mm Opening width 2000 mm Ejector stroke 250 mm Ejector force forward/back 226 kN Injection unit Screw diameter 95 mm Ls/ ... more

Año de construcción: 1985
Ubicación: Land-DE Germany, 42781 Haan
Vendedor: PLAMA Engineering GmbH

PVC, venting, counter rotation, calibrationtable with vacuumpump, puller 3 t. max. 240mm width, saw up to 240mm, tilting table 6m long more

Año de construcción: 2015
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12102 Manufacturer Krauss Maffei Machine type KM 1600-17200 MX Year 2015 Site Eschweiler Control type MC 6 Teletext in German Hours of operation 9187 h Delivery time immediately Price on request Technical details Clamping unit Clamping force of 16000 kN Tool opening force, max. 1120 kN Mounting plate (h x v) 2550 x 2100 mm 1850 x 1400 mm clear width (h x v) Tool unclamping stroke 2700 mm Mould installation height min. 700 mm Mould installation height max. 1600 mm Opening width 3400 mm Ejector stroke 350 mm Ejector force forward/back 300 kN Injection unit Screw diameter 135 mm Ls/D ratio 23 Injection pressure 1784 bar Ccm displacement 9662 Shot weight 8 ... more

Año de construcción: usado
Ubicación: Land-DE Germany, 42781 Haan
Vendedor: PLAMA Engineering GmbH

10 cavities, max 14000 bottles/hr, preform silo, Preform ascending conveyor, fitted for PCO Ø 28 mm (1810). Against surplus price: complete compressor system, mould chiller and moulds more

Año de construcción: 2003
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12024 Manufacturer Krauss Maffei Machine type KM 1000-8100 MC Built in 2003 Site Eschweiler Control type 4 MC Teletext in German Hours of operation 67000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 10000 kN Tool opening force, max. 623 kN 133 kN open driving force moving plate 110 kN close driving force moving plate Mounting plate (h x v) 1960 x 1740 mm Clear width (h x v) 1400 x 1120 mm Tool unclamping stroke 1700 mm Mould installation height min. 700 mm Mould installation height max. 1200 mm Opening width 2400 mm Ejector stroke 250 mm Ejector force forward/back 226 kN Injection unit Screw diameter 105 mm  ... more

Año de construcción: 1999
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11778 Manufacturer Krauss Maffei Type of machine KM 500-2700-C2 Built in 1999 Site Eschweiler Control type 4 MC Teletext in German Delivery time immediately Price on request Technical details Clamping unit Closing force 5000 kN Tool opening force, max. 280 kN 124 kN open driving force moving plate 102 kN close driving force moving plate Mounting plate (h x v) 1270 x 1200 mm Clear width (h x v) 900 x 800 mm Tool unclamping stroke 1170 mm Mould installation height min. 480 mm Opening width 1650 mm Ejector stroke 250 mm Ejector force forward/back 95 kN Injection unit Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 cc Shot  ... more

Año de construcción: 1997
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11991 Manufacturer Krauss Maffei Machine type KM 420-2700 C1 Year of construction 1997 Site Eschweiler Control type MC3 R Teletext in German Hours of operation 135000 h Delivery time immediately Price on request Technical details Clamping unit KN clamping force 4200 Tool opening force, max. 250 kN 124 kN open driving force moving plate 102 kN close driving force moving plate Mounting plate (h x v) 1270 x 1200 mm Clear width (h x v) 800 x 800 mm Tool unclamping stroke 1020 mm Mould installation height min. 380 mm Opening width 1400 mm Ejector stroke 250 mm Ejector force forward/back 95 kN Injection unit Screw diameter 80 mm Ls/D ratio of 20 Injection pres ... more

Año de construcción: 2011
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11971 Manufacturer Krauss Maffei Machine type KM 200-1400 CX Year 2011 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 22500 h Delivery time immediately Price on request Technical details Clamping unit KN clamping force 2000 Tool opening force, max. 101 kN 50 kN open driving force moving plate 42 kN close driving force moving plate Mounting plate (h x v) 915 x 915 mm Clear width (h x v) 560 x 560 mm Tool unclamping stroke 700 mm Mould installation height min. 350 mm Opening width 1050 mm Ejector stroke 200 mm Ejector force forward/back 58 kN Injection unit Screw diameter 60 mm Ls/D ratio 21 Injection pressure 2000 b ... more

Año de construcción: 2013
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11964 Manufacturer Krauss Maffei Machine type KM 200-1000 CX Year 2013 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 16000 h Delivery time immediately Price on request Technical details Clamping unit KN clamping force 2000 Tool opening force, max. 101 kN 50 kN open driving force moving plate 42 kN close driving force moving plate Mounting plate (h x v) 915 x 915 mm Clear width (h x v) 560 x 560 mm Tool unclamping stroke 700 mm Mould installation height min. 350 mm Opening width 1050 mm Ejector stroke 200 mm Ejector force forward/back 58 kN Injection unit Screw diameter 55 mm Ls/D ratio of 20 Injection pressure 190 ... more

Año de construcción: 2013
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11963 Manufacturer Krauss Maffei Machine type KM 200-1000 CX Year 2013 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 15000 h Delivery time immediately Price on request Technical details Clamping unit KN clamping force 2000 Tool opening force, max. 101 kN 50 kN open driving force moving plate 42 kN close driving force moving plate Mounting plate (h x v) 915 x 915 mm Clear width (h x v) 560 x 560 mm Tool unclamping stroke 700 mm Mould installation height min. 350 mm Opening width 1050 mm Ejector stroke 200 mm Ejector force forward/back 58 kN Injection unit Screw diameter 55 mm Ls/D ratio of 20 Injection pressure 190 ... more

Año de construcción: 2018
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12103 Manufacturer Krauss Maffei Machine type KM 200-1000 CX Year 2018 Site Eschweiler Control type MC 6 Teletext in German Hours of operation 2 h Delivery time immediately Price on request Technical details Clamping unit KN clamping force 2000 Tool opening force, max. 101 kN Mounting plate (h x v) 985 x 915 mm Clear width (h x v) 630 x 560 mm Tool unclamping stroke 700 mm Mould installation height min. 350 mm Opening width 1050 mm Ejector stroke 200 mm Ejector force forward/back 58 kN Injection unit Screw diameter 55 mm Ls/D ratio of 20 Injection pressure 1904 bar Stroke volume 523 cc Shot weight 476 g Injection current 216 CC/s Screw speed 280 1/min  ... more

Año de construcción: 2011
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11962 Manufacturer Krauss Maffei Machine type KM 160-750 CX Year 2011 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 24000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 1600 kN Tool opening force, max. 87 kN 45 kN open driving force moving plate Driving force portable plate closing 38 kN Mounting plate (h x v) 820 x 845 mm Clear width (h x v) 520 x 520 mm Tool unclamping stroke 600 mm Mould installation height min. 350 mm Opening width 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 50 mm Ls/D ratio 22 Injection pressure 2304 b ... more

Año de construcción: 2011
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11970 Manufacturer Krauss Maffei Machine type KM 160-1000 CX Year 2011 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 24000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 1600 kN Tool opening force, max. 87 kN 45 kN open driving force moving plate Driving force portable plate closing 38 kN Mounting plate (h x v) 820 x 845 mm Clear width (h x v) 520 x 520 mm Tool unclamping stroke 650 mm Mould installation height min. 300 mm Opening width 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 55 mm Ls/D ratio of 20 Injection pressure 19 ... more

Año de construcción: 2012
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11966 Manufacturer Krauss Maffei Machine type KM 160-750 CX Year 2012 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 17000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 1600 kN Tool opening force, max. 89 kN 45 kN open driving force moving plate Driving force portable plate closing 38 kN Mounting plate (h x v) 820 x 845 mm Clear width (h x v) 520 x 520 mm Tool unclamping stroke 650 mm Mould installation height min. 300 mm Opening width 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 50 mm Ls/D ratio of 20 Injection pressure 189 ... more

Año de construcción: 2011
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11961 Manufacturer Krauss Maffei Machine type KM 160-1000 CX Year 2011 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 24000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 1600 kN Tool opening force, max. 87 kN 45 kN open driving force moving plate Driving force portable plate closing 38 kN Mounting plate (h x v) 820 x 845 mm Clear width (h x v) 520 x 520 mm Tool unclamping stroke 650 mm Mould installation height min. 300 mm Opening width 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 55 mm Ls/D ratio of 20 Injection pressure 19 ... more

Año de construcción: usado
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11969 Manufacturer Krauss Maffei Machine type KM 160-1000 CX Year 2011 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 22000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 1600 kN Tool opening force, max. 86 kN 44 kN open driving force moving plate 37 kN close driving force moving plate Mounting plate (h x v) 820 x 845 mm Clear width (h x v) 520 x 520 mm Tool unclamping stroke 650 mm Mould installation height min. 300 mm Opening width 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 55 mm Ls/D ratio of 20 Injection pressure 1904 b ... more

Año de construcción: 2004
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12099 Manufacturer Krauss Maffei Machine type KM 150-520 C1 Year of manufacture 2004 Site Eschweiler Control type 4 MC Teletext in German Hours of operation 62000 h Delivery time immediately Price on request Technical details Clamping unit Clamping force of 1500 kN Tool opening force, max. 86 kN 45 kN open driving force moving plate 34 kN close driving force moving plate Mounting plate (h x v) 780 x 790 mm Clear width (h x v) 500 x 500 mm Tool unclamping stroke 600 mm Mould installation height min. 300 mm Opening width 900 mm Ejector stroke 150 mm Ejector force forward/back 22 kN Injection unit Screw diameter 45 mm Ls/D ratio of 20 Injection pressure 187 ... more

Año de construcción: 2004
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12096 Manufacturer Krauss Maffei Machine type KM 125-520 C2 Year of manufacture 2004 Site Eschweiler Control type 4 MC Teletext in German Hours of operation 71000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 1250 kN Tool opening force, max. 70 kN 35 kN open driving force moving plate 28 kN close driving force moving plate Mounting plate (h x v) 805 x 770 mm Clear width (h x v) 530 x 470 mm Tool unclamping stroke 600 mm Mould installation height min. 300 mm Opening width 900 mm Ejector stroke 150 mm Ejector force forward/back 22 kN Injection unit Screw diameter 45 mm Ls/D ratio of 20 Injection pressure 1878 ba ... more

Año de construcción: 2011
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11965 Manufacturer Krauss Maffei Machine type KM 130-750 CX Year 2011 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 22000 h Delivery time immediately Price on request Technical details Clamping unit Locking force 1300 kN Tool opening force, max. 70 kN 35 kN open driving force moving plate 31 kN close driving force moving plate Mounting plate (h x v) 745 x 770 mm Clear width (h x v) 470 x 470 mm Tool unclamping stroke 600 mm Mould installation height min. 300 mm Opening width 900 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 45 mm Ls/D ratio 22 Injection pressure 2336 bar  ... more

Año de construcción: 2011
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11967 Manufacturer Krauss Maffei Machine type KM 130-750 CX Year 2011 Site Eschweiler Control type MC 5 Screen text German/French/Turkish Hours of operation 22000 h Delivery time immediately Price on request Technical details Clamping unit Locking force 1300 kN Tool opening force, max. 70 kN 35 kN open driving force moving plate 31 kN close driving force moving plate Mounting plate (h x v) 745 x 770 mm Clear width (h x v) 470 x 470 mm Tool unclamping stroke 600 mm Mould installation height min. 300 mm Opening width 900 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 50 mm Ls/D ratio of 20 Injection pressure 1892 ba ... more

Año de construcción: 2017
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 12105 Manufacturer Krauss Maffei Machine type KM 80-380 CX Year 2017 Site Eschweiler Control type MC 6 Teletext in German Delivery time immediately Price on request Technical details Clamping unit Closing force 800 kN Tool opening force, max. 55 kN Mounting plate (h x v) 670 x 670 mm Clear width (h x v) 420 x 420 mm Tool unclamping stroke 500 mm Mould installation height min. 250 mm Opening width 750 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2429 bar Ccm stroke volume 154 Shot weight 140 g Injection power 96 CC/s Screw conveyor speed of 295 1/min Plasticizing power max ... more

Año de construcción: 2012
Ubicación: 52249 Eschweiler, Hermann-Hollerith-Str. 9
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11972 Manufacturer Krauss Maffei Machine type KM 80-380 CX Year 2012 Site Eschweiler Control type MC5 Screen text German/Turkish/French Hours of operation 14000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 800 kN Tool opening force, max. 55 kN 31 kN open driving force moving plate 22 kN close driving force moving plate Mounting plate (h x v) 670 x 670 mm Clear width (h x v) 420 x 420 mm Tool unclamping stroke 500 mm Mould installation height min. 250 mm Opening width 750 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection unit Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2249 bar Ccm ... more

Año de construcción: 2000
Ubicación: 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

warehouse no.: 502585 manufacturer: KRAUSS MAFFEI Typ: KM 650-2700 C1 Controller Unit: MC4 year of construction: 2000 operating hours: 76571 h clamping force: 6500 kN distance between tie bars h: 1000 mm distance between tie bars v: 930 mm size of mould plates h: 1510 mm size of mould plates v: 1370 mm min. mould height: 850 mm max. open daylight: 2000 mm opening stroke: 1150 mm Spfeotzt screw diameter: 90 mm swept volume: 1833 ccm injection pressure: 1445 bar equipment included ? interface EUROMAP 13 ? Hydraulically actuated needle shut-off-nozzle ? machine with material hopper ? CEE-socket 32A ? Machine without Handling ? machine incl. water flow regulator ?  ... more

Año de construcción: 2010
Ubicación: 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

warehouse no.: 502657 manufacturer: KRAUSS MAFFEI Typ: KM 800-6100 MX Controller Unit: MC5 year of construction: 2010 operating hours: 22000 h clamping force: 8000 kN distance between tie bars h: 1120 mm distance between tie bars v: 1000 mm size of mould plates h: 1600 mm size of mould plates v: 1530 mm min. mould height: 500 mm max. mould height: 1100 mm max. open daylight: 2100 mm opening stroke: 1600 mm screw diameter: 85 mm swept volume: 2695 ccm injection pressure: 2242 bar equipment included ? machine incl. Handling ? machine incl. safety fencing ? screw extremely wear resistant and corrosion resistant ? Bi-metallic barrel ? core pulling hydraul ... more

Año de construcción: 2007
Precio: used machinery auction RESALE 22.500 €
Ubicación: Lindau
Vendedor: Troostwijk Auctions

Injection molding machine (KM07); clamping force 2.000 kN; clamping plate (hxv) 915 x 915 mm; clear width 560 x 560 mm; mould opening stroke max 700 mm; mould height min 350 mm; opening width 1.050 mm; ejector stroke 200 mm; injection unit SP750; screw speed 340/450 rpm; screw diameter 40 mm; heating capacity 15,54 kW; control MC5 2.2; weight 10.350 kg; granulator single conveyor Wittmann feedmax 18; without handling system; without temperature control units more

Año de construcción: 2007
Precio: used machinery auction RESALE 25.000 €
Ubicación: Lindau
Vendedor: Troostwijk Auctions

Injection molding machine (KM04); clamping force 3.000 kN; opening width 1.150 m; clamping plate (hxv) 995 x 1.050 mm; clear width 630 x 630 mm; mould height min 330 mm; ejector stroke 200 mm; max. tool weight 3.430 kg; injection unit SP1000; screw speed 368/453 rpm; screw diameter 50 mm; heating capacity 19 kW; control MC4 1.7; weight 14.370 kg; granulator single conveyor Wittmann feedmax 18; without handling system; without temperature control units more

Año de construcción: 1999
Ubicación: 93320 Lodz, Sarmacka 8/25
Vendedor: PaGaPlast

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 200-1000 C1 Year/year: 1999 Control/controller: MC 4 Clamping force/clamping force: 200 to Holmabstand/Dist.Betw.Tiebars: 560 mm x 560 mm Disk size/platen size: 915 mm x 915 mm WZ height/mould hight: min 350 mm Opening/opening stroke: 700 mm Plate distance of max/Max open daylight: 1050 mm Auger/screw size: 55 mm Stroke volume/shot volume: 523 ccm / 476 gram PS Spritzdr / injection pressure: 1904 bar General / General engine power: 30 kW Heating/heating power: 18 kW Dimensions/dimensions: 5.3 x 1.9 m x 2.25 m Weight/weight: 9500 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Lubricat ... more

Año de construcción: usado
Ubicación: Land-de Germany, 41812 Erkelenz
Vendedor: Maschinenhandel Kmet

for Krauss-Maffei SP 520 screw diameter 40 mm maximum temperature: 375 °, Max pressure 2377 bar more

Año de construcción: 2006
Ubicación: Land-AT Austria, 2512 Tribuswinkel
Vendedor: Lovric Maschinenhandel e.U.

Offer / offer: > KRAUSS MAFFEI KM 1600/12000/390 MZ spin > Robot included Krauss Maffei > year 2006 Technical specifications: Clamping force: 1600 ton Shot weight (max): 4727 g Distance between tie-bars (H): 1850 mm Distance between tie-bars (V): 1400 mm Platen size (H): 2500 mm Platen size (V): 2100 mm Screw diameter: 105 mm Control type: Electronic MC4 Mould height (max): 2800 mm Mould height (min): 1800 mm Daylight between platens (max): 4300 mm Opening stroke (max.): 2500 mm Ejector force: 14.20 ton Core pulls: Yes Number of core pulls: 6 Screw L/D ratio: 23 Screw speed: 158 rpm Injection volume: 5193 cc  ... more

Año de construcción: 2005
Ubicación: Land-es ES
Vendedor: EVERMAK

Conected. Working hours: 8,052 h Maximum injection weight: 618 gr Distance between columns: 560/560 mm Closing force: 1750/2000 kn Dimensions of the plates: 915x 915 mm Diameter of the screw: 60 mm. Mold height, max weight: 2535 kg Minimum mold height: 350 mm Mold opening stroke: 700 mm Ejection stroke: 200 mm Extrusion force: 58/28 kn Number of noos: 2 Screw ratio: 21 Srew speed: 1 / min 259/368 Theoretical injection volume: Cm3 679 Injection pressure: 2000 BAR Injection flow rate: Cm3 / s 848 Maximum nozzle support force: KN 110 Nozzle stroke: 250 mm more

Año de construcción: 2006
Ubicación: Land-at AT
Vendedor: Lovric Maschinenhandel e.U.

Angebot / Offer: ?> ?KRAUSS MAFFEI ? KM ?1600/12000/390 MZ > Robot Krauss Maffei included > ?year 2006? ? Technical Specifications: Clamping Force: 1600 ton Shot Weight (Max): 4727 g Distance Between Tie-Bars (H): 1850 mm Distance Between Tie-Bars (V): 1400 mm Platen Size (H): 2500 mm Platen Size (V): 2100 mm Screw Diameter: 105 mm Control Type:Electronic MC4 Mould Height (Max): 2800 mm Mould Height (Min): 1800 mm Daylight Between Platens (Max): 4300 mm Opening Stroke (Max): 2500 mm Ejector Force: 14,20 ton Core Pulls:Yes Number Of Core Pulls: 6 Screw L/D Ratio: 23 Screw Speed: 158 rpm Injection Volume: 5193 cm³ Injec ... more

Año de construcción: 1998
Ubicación: Land-de Germany, 52070 Aachen
Vendedor: EuropNet GmbH

Machine specification Year: 1998 Injection Unit: .../390 Screw diameter: 35 mm Injection pressure: 2429 bar Injection volume: 156 ccm Shot capacity: 142 g Clamping Unit: KM 125/... Clamping force: 125 t Platen size: 745 x 770 mm Distance between tie bars: 470 x 470 mm Mould height: 300 mm Opening storke: 600 mm Max.Daylight: 900 mm Ejector stroke: 150 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 4,3 x 1,6 x 2,2 m Weight: 5.800 kg Equipment: - Robot interface as per Euromap 12 - 2 x Core pull - 2 x Pneumatic valve more

Año de construcción: 1997
Ubicación: Land-de Germany, 52070 Aachen
Vendedor: EuropNet GmbH

Machine specification Year: 1997 Control unit: MC3F Injection Unit: .../390 Screw diameter: 40 mm Injection pressure: 1860 bar Injection volume: 204 ccm Shot capacity: 185 g Clamping Unit: KM 80/... Clamping force: 80 t Platen size: 610 x 610 mm Distance between tie bars: 405 x 405 mm Mould height: 250 mm Opening storke: 500 mm Max.Daylight: 750 mm Ejector stroke: 150 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 4,1 x 1,4 x 2,1 m Weight: 3.500 kg Equipment: - Robot interface as per Euromap 12 - 2 x Core pull - 1 x Pneumatic valve more

Año de construcción: 2004
Ubicación: 40764 Langenfeld
Vendedor: Maschinenhandel Borowski GmbH

warehouse no.: 502565 manufacturer: KRAUSS MAFFEI Typ: KM 500-2700 C2 Controller Unit: MC 4 year of construction: 2004 This KM 500-2700 C2 from 2004 is freshly cleaned and will be delivered tested. The unit includes the handling LR 150, also from Krauss Maffei. The clamping unit is fully hydraulic system with position control. The Movements of it are actuated by proportional valve. The mould-movement and ejector-movement are using ultrasonic position transducer. Adjustable by the VDU is the clamping pressure and closing/opening speed. The central hydraulic ejector could be adjusting via VDU. The mould safety is choiceable by 3 steps. The stroke speeds and pressures. The mo ... more

Año de construcción: 2007
Ubicación: Eschweiler
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11872 Manufacturer Krauss Maffei Machine type KM 300-2700-C2 Built in 2007 Site Eschweiler Control type 4 MC Teletext in German Hours of operation 53675 h Delivery time immediately Price on request Technical details Clamping unit Clamping force of 3000 kN Tool opening force, max. 160 kN 86 kN open driving force moving plate 68 kN close driving force moving plate Mounting plate (h x v) 995 x 1050 mm Clear width (h x v) 630 x 630 mm Tool unclamping stroke 820 mm Mould installation height min. 330 mm Opening width 1150 mm Ejector stroke 200 mm Ejector force forward/back 58 kN Injection unit Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Str ... more

Año de construcción: 2009
Ubicación: Eschweiler
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11905 Manufacturer Krauss Maffei Machine type KM 160-750 EX Year of construction 2009 Site Eschweiler Control type MC 5 Teletext in German Hours of operation 36000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 1600 kN Mounting plate (h x v) 930 x 845 mm Clear width (h x v) 630 x 520 mm Tool unclamping stroke 450 mm Mould installation height min. 300 mm Mould installation height max. 550 mm Opening width 1000 mm Ejector stroke 150 mm Ejector force forward/back 22 kN Injection unit Screw diameter 40 mm Ls/D ratio 25.2 Injection pressure 2500 bar Stroke volume 241 cc Shot weight 219 g Injection power 377 CC/s S ... more

Año de construcción: 2008
Ubicación: Land-de Germany, 52249 Eschweiler
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11906 Manufacturer Krauss Maffei KM 80-380 EX machine type Built in 2008 Site Eschweiler Control type MC 5 Teletext in German Hours of operation 51000 h Delivery time immediately Price on request Technical details Clamping unit Closing force 800 kN Mounting plate (h x v) 750 x 660 mm Size (h x v) 520 x 420 mm clear Tool unclamping stroke 360 mm Mould installation height min. 300 mm Mould installation height max. 580 mm Opening width 940 mm Ejector stroke 100 mm Ejector force forward/back 22 kN Injection unit Screw diameter 35 mm Ls/D ratio 22.9 Injection pressure 2429 bar Stroke volume 156 cc Shot weight 142 g Injection power 289 CC/s Screw speed 477 1 ... more

Año de construcción: 2005
Ubicación: Eschweiler
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG

Stock no. 11945 Manufacturer Krauss Maffei Machine type KM 420-1900 C2 Built in 2005 Site Eschweiler Control type 4 MC Teletext in German Hours of operation 46000 h Delivery time immediately Price on request Technical details Clamping unit KN clamping force 4200 Tool opening force, max. 250 kN 124 kN open driving force moving plate 102 kN close driving force moving plate Mounting plate (h x v) 1270 x 1200 mm Clear width (h x v) 800 x 800 mm Tool unclamping stroke 1020 mm Mould installation height min. 380 mm Opening width 1400 mm Ejector stroke 250 mm Ejector force forward/back 95 kN Injection unit Screw diameter 50 mm Ls/D ratio 22 Injection pressure 2304 bar St ... more

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KRAUSS types: