340 ofertas

Año de construcción: usado
Ubicación: Land-krauss maffei 80-340 c2
year of construction: 1994
bdz3tbeupm
circuit diagram: 697 1188
circuit diagram: 628 8205
u motors: 400 v
u motors: 400 v
power type: 50 hz
 KRAUSS MAFFEI 80-340 C2 YEAR OF CONSTRUCTION: 1994 BDZ3TBEUPM CIRCUIT DIAGRAM: 697 1188 CIRCUIT DIAGRAM: 628 8205 U MOTORS: 400 V U MOTORS: 400 V POWER TYPE: 50 HZ
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-krauss maffei 80 ton. injection molding

type km 80-390 c1
construction year 2001
dbb 405x405 mm.
screw diameter 40
moving plane stroke 500
calculated injection volume 204
n.3 air spray
machine certified for good conditions
can be seen running with client’s mould, previous appointment KRAUSS MAFFEI 80 TON. INJECTION MOLDING TYPE KM 80-390 C1 CONSTRUCTION YEAR 2001 DBB 405X405 MM. SCREW DIAMETER 40 MOVING PLANE STROKE 500 CALCULATED INJECTION VOLUME 204 N.3 AIR SPRAY MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-krauss maffei 80 ton. injection molding

type km 80-520 c1
construction year 2002
dbb 405x405 mm.
screw diameter 40
moving plane stroke 500
calculated injection volume 217
n.3 air spray
1 jack
machine certified for good conditions
can be seen running with client’s mould, previous appointment KRAUSS MAFFEI 80 TON. INJECTION MOLDING TYPE KM 80-520 C1 CONSTRUCTION YEAR 2002 DBB 405X405 MM. SCREW DIAMETER 40 MOVING PLANE STROKE 500 CALCULATED INJECTION VOLUME 217 N.3 AIR SPRAY 1 JACK MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine specification

year: 2003 
control unit: mc4 

injection unit: .../1000
screw diameter: 55 mm 
injection pressure: 1904 bar 
injection volume: 523 ccm 
shot capacity: 476 g 

clamping unit: 200/...
clamping force: 200 t 
platen size: 915 x 910 mm 
distance between tie bars: 560 x 560 mm 
mould height: 350 mm 
opening storke: 700 mm 
max.daylight: 1050 mm 
ejector stroke: 200 mm 
drive power of the hydraulic pump: 37 kw 
cylinder heating power: 18 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 5,35 x 1,90 x 2,25 m 
weight: 10550 kg 

equipment:
- 1 x pneumatic valve
- 1 x core pulls
- quality package
- increased oil cooler
- mecanic interface euromap 18 MACHINE SPECIFICATION YEAR: 2003 CONTROL UNIT: MC4 INJECTION UNIT: .../1000 SCREW DIAMETER: 55 MM INJECTION PRESSURE: 1904 BAR INJECTION VOLUME: 523 CCM SHOT CAPACITY: 476 G CLAMPING UNIT: 200/... CLAMPING FORCE: 200 T PLATEN SIZE: 915 X 910 MM DISTANCE BETWEEN TIE BARS: 560 X 560 MM MOULD HEIGHT: 350 MM OPENING STORKE: 700 MM MAX.DAYLIGHT: 1050 MM EJECTOR STROKE: 200 MM DRIVE POWER OF THE HYDRAULIC PUMP: 37 KW CYLINDER HEATING POWER: 18 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 5,35 X 1,90 X 2,25 M WEIGHT: 10550 KG EQUIPMENT: - 1 X PNEUMATIC VALVE - 1 X CORE PULLS - QUALITY PACKAGE - INCREASED OIL COOLER - MECANIC INTERFACE EUROMAP 18
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 12000 kg<br/>dimensions (l x w x h) approx.: 8000 x 1800 x 2500 mm<br/>description: international size designation 1200/250, closing unit: closing force 2500 kn, tool opening force 160 kn, size of the tool clamping plate 900 x 830 mm, clear span between the columns 630 x 560 mm, tool opening path max. 800 mm, tool installation height 350 to 1150 mm, hydraulic ejector, stroke 150 mm, power 60 kn, injection unit: work capacity 1200 cmmp, screw diameter 55/60/70 mm, injection pressure 2116/1778/1306 bar, stroke volume max. 570/678/923 cm³, moulded part weight 513/610/830 g, see attached pdf document for further details WEIGHT APPROX.: 12000 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 1800 X 2500 MM
DESCRIPTION: INTERNATIONAL SIZE DESIGNATION 1200/250, CLOSING UNIT: CLOSING FORCE 2500 KN, TOOL OPENING FORCE 160 KN, SIZE OF THE TOOL CLAMPING PLATE 900 X 830 MM, CLEAR SPAN BETWEEN THE COLUMNS 630 X 560 MM, TOOL OPENING PATH MAX. 800 MM, TOOL INSTALLATION HEIGHT 350 TO 1150 MM, HYDRAULIC EJECTOR, STROKE 150 MM, POWER 60 KN, INJECTION UNIT: WORK CAPACITY 1200 CMMP, SCREW DIAMETER 55/60/70 MM, INJECTION PRESSURE 2116/1778/1306 BAR, STROKE VOLUME MAX. 570/678/923 CM³, MOULDED PART WEIGHT 513/610/830 G, SEE ATTACHED PDF DOCUMENT FOR FURTHER DETAILS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-reconditioned 2-component krauss-maffei injection moulding machine with robot sepro RECONDITIONED 2-COMPONENT KRAUSS-MAFFEI INJECTION MOULDING MACHINE WITH ROBOT SEPRO
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-weight approx.: 130420 kg<br/>dimensions (l x w x h) approx.: 15600 x 3100 x 3010 mm<br/>description: tool closing force 18000 kn, tool opening force 1000 kn, tool opening path max. 1800 mm, clear distance between columns 1300 x 1300 mm, max. tool holder plate 1960 x 1960 mm, tool installation height 750 to 1350 mm, opening width max. 3150 mm, max. stroke of the hydraulic ejection 250 mm, ejection force 315 kn, heating: control area 6 output in kw for nozzles 0.67, in total 76.67, injection unit: work capacity 1015 knm, screw diameter 115/130/155 mm, spray pressure max. 1840/1440/1010 bar, spray force 1911 kn, stroke volume max. 5500/7030/10000 cm³, moulded part weight max. in polystyrene 4960/6310/9000 g, see attached pdf document for further details, a mixing unit is included WEIGHT APPROX.: 130420 KG
DIMENSIONS (L X W X H) APPROX.: 15600 X 3100 X 3010 MM
DESCRIPTION: TOOL CLOSING FORCE 18000 KN, TOOL OPENING FORCE 1000 KN, TOOL OPENING PATH MAX. 1800 MM, CLEAR DISTANCE BETWEEN COLUMNS 1300 X 1300 MM, MAX. TOOL HOLDER PLATE 1960 X 1960 MM, TOOL INSTALLATION HEIGHT 750 TO 1350 MM, OPENING WIDTH MAX. 3150 MM, MAX. STROKE OF THE HYDRAULIC EJECTION 250 MM, EJECTION FORCE 315 KN, HEATING: CONTROL AREA 6 OUTPUT IN KW FOR NOZZLES 0.67, IN TOTAL 76.67, INJECTION UNIT: WORK CAPACITY 1015 KNM, SCREW DIAMETER 115/130/155 MM, SPRAY PRESSURE MAX. 1840/1440/1010 BAR, SPRAY FORCE 1911 KN, STROKE VOLUME MAX. 5500/7030/10000 CM³, MOULDED PART WEIGHT MAX. IN POLYSTYRENE 4960/6310/9000 G, SEE ATTACHED PDF DOCUMENT FOR FURTHER DETAILS, A MIXING UNIT IS INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-		
		
make:	krauss maffei
type:		km200-1000 c2
built:	2005
serialnumber:	61006468
control:	mc4
location:  poland
country of origin:	germany
		
		
technical data	

screw dia:	55 mm
swept volume:	523 ccm
injection pressure:	1900 bar
		
clamping force:	2000 kn
tie bar distance:	630x560 mm
mould height min.:	350 mm
opening stroke:	700 mm	
		
power:	37 kw+19 kw
workinghours:	 45.094 h
dimensions:	5,32m x 1,90m x2,24m
weight:	9500 kg
		
equipment	

manual:	yes
robot slot: yes 

 + robot wittmann w621
  MAKE: KRAUSS MAFFEI TYPE: KM200-1000 C2 BUILT: 2005 SERIALNUMBER: 61006468 CONTROL: MC4 LOCATION: POLAND COUNTRY OF ORIGIN: GERMANY TECHNICAL DATA SCREW DIA: 55 MM SWEPT VOLUME: 523 CCM INJECTION PRESSURE: 1900 BAR CLAMPING FORCE: 2000 KN TIE BAR DISTANCE: 630X560 MM MOULD HEIGHT MIN.: 350 MM OPENING STROKE: 700 MM POWER: 37 KW+19 KW WORKINGHOURS: 45.094 H DIMENSIONS: 5,32M X 1,90M X2,24M WEIGHT: 9500 KG EQUIPMENT MANUAL: YES ROBOT SLOT: YES + ROBOT WITTMANN W621
Vendedor: TADplast
Año de construcción: usado
Ubicación: Land-screw size:40 mm<br/>injection shot weight in polysterol:183 g<br/>clamping force:800 kn<br/>: <br/>injection unit: <br/>screw size:40 mm<br/>max. swept volumne:204 cm³<br/>injection shot weight in polysterol:183 g/ps<br/>injection pressure:1.653 bar<br/>: <br/>clamping unit: <br/>clamping force:80 t<br/>distance between tie-bars h x v:405 x 405 mm<br/>mould hight min.:250 mm<br/>mould height max.:750 mm<br/>opening stroke:500 mm<br/>: <br/>control: <br/>microprocessor control:mc3f <br/>screen text:deutsch / german <br/>manual:deutsch / german <br/>: <br/>equipment: <br/>robot interface:nein/no <br/>core pull:1 <br/>without hopper / without water distributor: <br/>: <br/>other data: <br/>pump drive power:18,5 kw<br/>total connection power:31,2 kw<br/>total wight:3.600 kg<br/>dimension l x w x h:4,2 x 1,3 x 1,9 m<br/><br/>payment: 100% prior to delivery SCREW SIZE:40 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:183 G
CLAMPING FORCE:800 KN
:
INJECTION UNIT:
SCREW SIZE:40 MM
MAX. SWEPT VOLUMNE:204 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:183 G/PS
INJECTION PRESSURE:1.653 BAR
:
CLAMPING UNIT:
CLAMPING FORCE:80 T
DISTANCE BETWEEN TIE-BARS H X V:405 X 405 MM
MOULD HIGHT MIN.:250 MM
MOULD HEIGHT MAX.:750 MM
OPENING STROKE:500 MM
:
CONTROL:
MICROPROCESSOR CONTROL:MC3F
SCREEN TEXT:DEUTSCH / GERMAN
MANUAL:DEUTSCH / GERMAN
:
EQUIPMENT:
ROBOT INTERFACE:NEIN/NO
CORE PULL:1
WITHOUT HOPPER / WITHOUT WATER DISTRIBUTOR:
:
OTHER DATA:
PUMP DRIVE POWER:18,5 KW
TOTAL CONNECTION POWER:31,2 KW
TOTAL WIGHT:3.600 KG
DIMENSION L X W X H:4,2 X 1,3 X 1,9 M

PAYMENT: 100% PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Año de construcción: usado
Ubicación: Land-overview
brand: krauss maffei
model: 200-700 c2
application type: injection moulding 
machine type: injection moulding machines 
availability: immediately
production year: 1999
location: germany
origin country: germany
production hours: 18645

general data
measurements width: 5160 mm 
measurements depth: 1900 mm 
measurements height: 2240 mm 
machine weight: 8800 kg

control unit
brand: krauss maffei
cnc main language: german
cnc language customizable: yes

injection unit
screw diameter: 50 mm 
stroke volume: 377 cm3 
injection pressure: 1892 bar

clamping unit
clamping force: 2000 kn 
opening stroke: 1050 mm

additional equipment
1: feeding line

see full technical specifications of this machine at:
abc://bit.ly/2sxrf4p OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 200-700 C2 APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1999 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 18645 GENERAL DATA MEASUREMENTS WIDTH: 5160 MM MEASUREMENTS DEPTH: 1900 MM MEASUREMENTS HEIGHT: 2240 MM MACHINE WEIGHT: 8800 KG CONTROL UNIT BRAND: KRAUSS MAFFEI CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 50 MM STROKE VOLUME: 377 CM3 INJECTION PRESSURE: 1892 BAR CLAMPING UNIT CLAMPING FORCE: 2000 KN OPENING STROKE: 1050 MM ADDITIONAL EQUIPMENT 1: FEEDING LINE SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2SXRF4P
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-conical dryer (1x), make krauss maffei verfahrenstechnik gmbh, type tmd 0,25/160 titus-mixer-dryer, new 1995, material stainless steel (1.4571), capacity 380 ltr, useful capacity 250 ltr, largest cone diameter 1016mm, cone height 1066mm, dished top, stainless steel arm , mixing screw jacketed (6 ltr), motor 4,0 kw + 1,5 kw, 380 volt (ex), working pressure vac/3 bar, with jacket (96 ltr), working pressure 6 bar, max. temperature 165 degr. c., bottom outlet dia. 150mm, mach.no. 7005 / 742904/3, mounted on frame, with switchgear, floorspace 2,0x2,0 m, total height 3,5 m, weight 2650 kgconical dryersdryers > conical dryers CONICAL DRYER (1X), MAKE KRAUSS MAFFEI VERFAHRENSTECHNIK GMBH, TYPE TMD 0,25/160 TITUS-MIXER-DRYER, NEW 1995, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 380 LTR, USEFUL CAPACITY 250 LTR, LARGEST CONE DIAMETER 1016MM, CONE HEIGHT 1066MM, DISHED TOP, STAINLESS STEEL ARM , MIXING SCREW JACKETED (6 LTR), MOTOR 4,0 KW + 1,5 KW, 380 VOLT (EX), WORKING PRESSURE VAC/3 BAR, WITH JACKET (96 LTR), WORKING PRESSURE 6 BAR, MAX. TEMPERATURE 165 DEGR. C., BOTTOM OUTLET DIA. 150MM, MACH.NO. 7005 / 742904/3, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE 2,0X2,0 M, TOTAL HEIGHT 3,5 M, WEIGHT 2650 KGCONICAL DRYERSDRYERS > CONICAL DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 2004 
control unit: mc 4 

injection unit: .../220
screw diameter: 30 mm 
injection pressure: 2500 bar 
injection volume: 85 ccm 
shot capacity: 77 g 

clamping unit: km 80/...
clamping force: 80 t 
platen size: 610 x 610 mm 
distance between tie bars: 405 x 405 mm 
mould height: 350 ... mm 
opening storke: 500 mm 
max.daylight: 750 mm 
ejector stroke: 150 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,0 x 1,4 x 1,9 m 
weight: 2.960 kg 

equipment:
- 2 x core pull
- 8 x hotrunner controller
- position-regulated screw
- 1 x pneumatic needle valve nozzle
- interface for dosing unit and robot  MACHINE SPECIFICATION YEAR: 2004 CONTROL UNIT: MC 4 INJECTION UNIT: .../220 SCREW DIAMETER: 30 MM INJECTION PRESSURE: 2500 BAR INJECTION VOLUME: 85 CCM SHOT CAPACITY: 77 G CLAMPING UNIT: KM 80/... CLAMPING FORCE: 80 T PLATEN SIZE: 610 X 610 MM DISTANCE BETWEEN TIE BARS: 405 X 405 MM MOULD HEIGHT: 350 ... MM OPENING STORKE: 500 MM MAX.DAYLIGHT: 750 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,0 X 1,4 X 1,9 M WEIGHT: 2.960 KG EQUIPMENT: - 2 X CORE PULL - 8 X HOTRUNNER CONTROLLER - POSITION-REGULATED SCREW - 1 X PNEUMATIC NEEDLE VALVE NOZZLE - INTERFACE FOR DOSING UNIT AND ROBOT
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-rotating vacuum filter (1x), make krauss maffei, type sz-filter 0,25 m2, no 5514, new 1978, material stainless steel, filter surface 0,25 m2, drum sizes dia. 500x165mm, motor 0,28 kw, 220/380 volt (ex), with variable speed drive, with stirrer, with knive discharge schaberabnahme, with roll discharge walzenabnahme, with wire discharge schnürenabnahme, with vacuum pump (2x), motor 0,55 kw, 220/380 volt (ex), with vacuum vessel (2x), mounted on mild steel frame, with switchgear, floorspace 2,2x1,2 m, total height 2,2 m, weight 920 kgrotating vacuum filtersfilters > rotating vacuum filters ROTATING VACUUM FILTER (1X), MAKE KRAUSS MAFFEI, TYPE SZ-FILTER 0,25 M2, NO 5514, NEW 1978, MATERIAL STAINLESS STEEL, FILTER SURFACE 0,25 M2, DRUM SIZES DIA. 500X165MM, MOTOR 0,28 KW, 220/380 VOLT (EX), WITH VARIABLE SPEED DRIVE, WITH STIRRER, WITH KNIVE DISCHARGE SCHABERABNAHME, WITH ROLL DISCHARGE WALZENABNAHME, WITH WIRE DISCHARGE SCHNüRENABNAHME, WITH VACUUM PUMP (2X), MOTOR 0,55 KW, 220/380 VOLT (EX), WITH VACUUM VESSEL (2X), MOUNTED ON MILD STEEL FRAME, WITH SWITCHGEAR, FLOORSPACE 2,2X1,2 M, TOTAL HEIGHT 2,2 M, WEIGHT 920 KGROTATING VACUUM FILTERSFILTERS > ROTATING VACUUM FILTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: krauss maffei
model: 175-1900 cv
application type: injection moulding 
machine type: injection moulding machines 
availability: 01/01/2019
production year: 2002
location: germany
origin country: germany
production hours: 77389

general data
measurements width: 7500 mm 
measurements depth: 2000 mm 
measurements height: 4400 mm 
machine weight: 11800 kg

control unit
brand: krauss maffei
cnc main language: german 
cnc language customizable: yes

injection unit
screw diameter: 80 mm
shot weight: 1367 g/ps
stroke volume: 1367 cm3 
injection pressure: 1360 bar 
plasticising rate max: 135 g/s ps 
screw speed: 130 rpm
heating capacity: 49 kw 
adjustable heating zones: 9 
nozzle pressure: 110 kn

clamping unit
clamping force: 1750 kn
opening stroke: 700 mm
max open daylight: 1150 mm 
distance between bars: 560x560 mm 
mould height min: 450 mm
mould height max: 1150 mm
size of mold platens: 915x915 mm 
ejector stroke: 200 mm
ejector force for / back: 77/28 kn

media
power consumption: 198 kw

additional equipment
1: wittmann robot-system w633p -259 (300x1400)

see full technical specifications of this machine at: 
abc://bit.ly/2rx7ely
 OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 175-1900 CV APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: 01/01/2019 PRODUCTION YEAR: 2002 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 77389 GENERAL DATA MEASUREMENTS WIDTH: 7500 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 4400 MM MACHINE WEIGHT: 11800 KG CONTROL UNIT BRAND: KRAUSS MAFFEI CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 80 MM SHOT WEIGHT: 1367 G/PS STROKE VOLUME: 1367 CM3 INJECTION PRESSURE: 1360 BAR PLASTICISING RATE MAX: 135 G/S PS SCREW SPEED: 130 RPM HEATING CAPACITY: 49 KW ADJUSTABLE HEATING ZONES: 9 NOZZLE PRESSURE: 110 KN CLAMPING UNIT CLAMPING FORCE: 1750 KN OPENING STROKE: 700 MM MAX OPEN DAYLIGHT: 1150 MM DISTANCE BETWEEN BARS: 560X560 MM MOULD HEIGHT MIN: 450 MM MOULD HEIGHT MAX: 1150 MM SIZE OF MOLD PLATENS: 915X915 MM EJECTOR STROKE: 200 MM EJECTOR FORCE FOR / BACK: 77/28 KN MEDIA POWER CONSUMPTION: 198 KW ADDITIONAL EQUIPMENT 1: WITTMANN ROBOT-SYSTEM W633P -259 (300X1400) SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2RX7ELY
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-conical mixer cone screw mixer (1x), make krauss maffei, type titus, new 1981, material stainless steel (1.4541), capacity 37.500 ltr. (usefull 35.600 ltr.), largest cone diameter 4000mm, cone height 5805mm, dished top (870mm), motor 22,0/11,0 kw, 380 volt (ex), motor 0,37/1,5 kw, 380 volt (ex), working pressure 0,5/-0,6 mbar, test pressure 0,65 bar, half coil jacketed (70 ltr.), working pressure 6 bar, test pressure 7,8 bar, max. temperature 100 dgr.c., bottom discharge dia. 150mmconical mixersmixers > conical mixers CONICAL MIXER CONE SCREW MIXER (1X), MAKE KRAUSS MAFFEI, TYPE TITUS, NEW 1981, MATERIAL STAINLESS STEEL (1.4541), CAPACITY 37.500 LTR. (USEFULL 35.600 LTR.), LARGEST CONE DIAMETER 4000MM, CONE HEIGHT 5805MM, DISHED TOP (870MM), MOTOR 22,0/11,0 KW, 380 VOLT (EX), MOTOR 0,37/1,5 KW, 380 VOLT (EX), WORKING PRESSURE 0,5/-0,6 MBAR, TEST PRESSURE 0,65 BAR, HALF COIL JACKETED (70 LTR.), WORKING PRESSURE 6 BAR, TEST PRESSURE 7,8 BAR, MAX. TEMPERATURE 100 DGR.C., BOTTOM DISCHARGE DIA. 150MMCONICAL MIXERSMIXERS > CONICAL MIXERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: mc3f 

injection unit: .../390
screw diameter: 35 mm 
injection pressure: 2429 bar 
injection volume: 156 ccm 
shot capacity: 142 g 

clamping unit: km 125/...
clamping force: 125 t 
platen size: 745 x 770 mm 
distance between tie bars: 470 x 470 mm 
mould height: 300 mm 
opening storke: 600 mm 
max.daylight: 900 mm 
ejector stroke: 150 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,3 x 1,6 x 2,2 m 
weight: 5.800 kg 

equipment:
- robot interface as per euromap 12
- 2 x core pull
- 2 x pneumatic valve
- accumulator MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: MC3F INJECTION UNIT: .../390 SCREW DIAMETER: 35 MM INJECTION PRESSURE: 2429 BAR INJECTION VOLUME: 156 CCM SHOT CAPACITY: 142 G CLAMPING UNIT: KM 125/... CLAMPING FORCE: 125 T PLATEN SIZE: 745 X 770 MM DISTANCE BETWEEN TIE BARS: 470 X 470 MM MOULD HEIGHT: 300 MM OPENING STORKE: 600 MM MAX.DAYLIGHT: 900 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,3 X 1,6 X 2,2 M WEIGHT: 5.800 KG EQUIPMENT: - ROBOT INTERFACE AS PER EUROMAP 12 - 2 X CORE PULL - 2 X PNEUMATIC VALVE - ACCUMULATOR
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-heat exchanger (1x), make krauss maffei ag münchen, no 351397, new 1968, heating surface 3,0 m2, tube material stainless steel, shell material stainless steel, cover material stainless steel (1.4571), tube capacity 18 ltr, number of tubes: 52, tube diameter 10mm, tube length 1540mm, working pressure tubes 10 bar, test pressure tubes 13 bar, max. temperature 60 degr. c., shell capacity 70 ltr, working pressure shell vac/10 bar, test pressure shell 13 bar, max. temperature 200 degr. c., shell connections dia. 125mm + 2x dia. 40mm, cover connections 2x dia. 25mm, floorspace 2,0x0,5 m, weight 260 kgheat exchangersheat exchangers > heat exchangers HEAT EXCHANGER (1X), MAKE KRAUSS MAFFEI AG MüNCHEN, NO 351397, NEW 1968, HEATING SURFACE 3,0 M2, TUBE MATERIAL STAINLESS STEEL, SHELL MATERIAL STAINLESS STEEL, COVER MATERIAL STAINLESS STEEL (1.4571), TUBE CAPACITY 18 LTR, NUMBER OF TUBES: 52, TUBE DIAMETER 10MM, TUBE LENGTH 1540MM, WORKING PRESSURE TUBES 10 BAR, TEST PRESSURE TUBES 13 BAR, MAX. TEMPERATURE 60 DEGR. C., SHELL CAPACITY 70 LTR, WORKING PRESSURE SHELL VAC/10 BAR, TEST PRESSURE SHELL 13 BAR, MAX. TEMPERATURE 200 DEGR. C., SHELL CONNECTIONS DIA. 125MM + 2X DIA. 40MM, COVER CONNECTIONS 2X DIA. 25MM, FLOORSPACE 2,0X0,5 M, WEIGHT 260 KGHEAT EXCHANGERSHEAT EXCHANGERS > HEAT EXCHANGERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 1997 
control unit: mc3f 

injection unit: .../390
screw diameter: 40 mm 
injection pressure: 1860 bar 
injection volume: 204 ccm 
shot capacity: 185 g 

clamping unit: km 80/...
clamping force: 80 t 
platen size: 610 x 610 mm 
distance between tie bars: 405 x 405 mm 
mould height: 250 mm 
opening storke: 500 mm 
max.daylight: 750 mm 
ejector stroke: 150 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,1 x 1,4 x 2,1 m 
weight: 3500 kg 

equipment:
- robot interface as per euromap 12
- 2 x core pull
- 1 x pneumatic valve   MACHINE SPECIFICATION YEAR: 1997 CONTROL UNIT: MC3F INJECTION UNIT: .../390 SCREW DIAMETER: 40 MM INJECTION PRESSURE: 1860 BAR INJECTION VOLUME: 204 CCM SHOT CAPACITY: 185 G CLAMPING UNIT: KM 80/... CLAMPING FORCE: 80 T PLATEN SIZE: 610 X 610 MM DISTANCE BETWEEN TIE BARS: 405 X 405 MM MOULD HEIGHT: 250 MM OPENING STORKE: 500 MM MAX.DAYLIGHT: 750 MM EJECTOR STROKE: 150 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,1 X 1,4 X 2,1 M WEIGHT: 3500 KG EQUIPMENT: - ROBOT INTERFACE AS PER EUROMAP 12 - 2 X CORE PULL - 1 X PNEUMATIC VALVE
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-paddle dryer, make krauss maffei verfahrenstechnik gbmh, type reactotherm, no 08613/1, new 1994, continuous / batch, material stainless steel (1.4404), capacity +/- 80 ltr, trough sizes dia.300mm x1400mm, inlet (2x) dia.200mm, (1x) dia.150mm, outlet dia.200mm, working pressure 10 bar, with jacket, working pressure 16 bar, shaft can be heated, max. temperature 350 gr.c, motor 2,5-15 kw, 88-460 volt, 10-60 hz, mounted on frame, floorspace 3,4x1,6 m, total height 1,4 m, weight 1800 kgpaddle dryersdryers > paddle dryers PADDLE DRYER, MAKE KRAUSS MAFFEI VERFAHRENSTECHNIK GBMH, TYPE REACTOTHERM, NO 08613/1, NEW 1994, CONTINUOUS / BATCH, MATERIAL STAINLESS STEEL (1.4404), CAPACITY +/- 80 LTR, TROUGH SIZES DIA.300MM X1400MM, INLET (2X) DIA.200MM, (1X) DIA.150MM, OUTLET DIA.200MM, WORKING PRESSURE 10 BAR, WITH JACKET, WORKING PRESSURE 16 BAR, SHAFT CAN BE HEATED, MAX. TEMPERATURE 350 GR.C, MOTOR 2,5-15 KW, 88-460 VOLT, 10-60 HZ, MOUNTED ON FRAME, FLOORSPACE 3,4X1,6 M, TOTAL HEIGHT 1,4 M, WEIGHT 1800 KGPADDLE DRYERSDRYERS > PADDLE DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 2006 
control unit: mc4 

injection unit: .../2700
screw diameter: 70 mm 
injection pressure: 2389 bar 
injection volume: 1097 ccm 
shot capacity: 998 g 

clamping unit: 320/...
clamping force: 320 t 
platen size: 1060 x 1095 mm 
distance between tie bars: 710 x 710 mm 
mould height: 380... mm 
opening storke: 920 mm 
max.daylight: 1300 mm 
ejector stroke: 250 mm 
drive power of the hydraulic pump: 75 kw 
cylinder heating power: 47 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 7,3 x 2,1 x 2,5 m 
weight: 17000 kg 

equipment:
- 2 x pneumatic valve
- 3 x core pull
?- screw drive by three phase motor
- ?robot interface as per euromap 67 MACHINE SPECIFICATION YEAR: 2006 CONTROL UNIT: MC4 INJECTION UNIT: .../2700 SCREW DIAMETER: 70 MM INJECTION PRESSURE: 2389 BAR INJECTION VOLUME: 1097 CCM SHOT CAPACITY: 998 G CLAMPING UNIT: 320/... CLAMPING FORCE: 320 T PLATEN SIZE: 1060 X 1095 MM DISTANCE BETWEEN TIE BARS: 710 X 710 MM MOULD HEIGHT: 380... MM OPENING STORKE: 920 MM MAX.DAYLIGHT: 1300 MM EJECTOR STROKE: 250 MM DRIVE POWER OF THE HYDRAULIC PUMP: 75 KW CYLINDER HEATING POWER: 47 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 7,3 X 2,1 X 2,5 M WEIGHT: 17000 KG EQUIPMENT: - 2 X PNEUMATIC VALVE - 3 X CORE PULL ?- SCREW DRIVE BY THREE PHASE MOTOR - ?ROBOT INTERFACE AS PER EUROMAP 67
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-peeler centrifuge horizontalschälzentrifuge (1x), make krauss maffei, type hz-80/1 si, no 11120 / 300 232, new 1991, material stainless steel (1.4571/1.4581), basket sizes dia. 800x400mm, wall thickness 18mm, max. loading weight 103,7 kg, motor 37,0 kw, 380 volt (ex), max. basket speed 1900 rpm, with scraper, hydraulic operated, with hydraulic unit, floorspace 1,8x1,6 m, total height 1,5 m, weight 3000 kgpeeling centrifugescentrifuges > peeling centrifuges PEELER CENTRIFUGE HORIZONTALSCHäLZENTRIFUGE (1X), MAKE KRAUSS MAFFEI, TYPE HZ-80/1 SI, NO 11120 / 300 232, NEW 1991, MATERIAL STAINLESS STEEL (1.4571/1.4581), BASKET SIZES DIA. 800X400MM, WALL THICKNESS 18MM, MAX. LOADING WEIGHT 103,7 KG, MOTOR 37,0 KW, 380 VOLT (EX), MAX. BASKET SPEED 1900 RPM, WITH SCRAPER, HYDRAULIC OPERATED, WITH HYDRAULIC UNIT, FLOORSPACE 1,8X1,6 M, TOTAL HEIGHT 1,5 M, WEIGHT 3000 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: krauss maffei
model: tl 63
application type: sawing 
machine type: sawing machines 
availability: immediately 
production year: 2013 
location: austria
origin country: germany 
production hours: 0

general data
measurements width: 2593 mm 
measurements depth: 725 mm 
measurements height: 2880 mm 
machine weight: 400 kg

media
main electronic connection: 400 v

see full technical specifications of this machine at:
abc://bit.ly/2du7rus OVERVIEW BRAND: KRAUSS MAFFEI MODEL: TL 63 APPLICATION TYPE: SAWING MACHINE TYPE: SAWING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2013 LOCATION: AUSTRIA ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 0 GENERAL DATA MEASUREMENTS WIDTH: 2593 MM MEASUREMENTS DEPTH: 725 MM MEASUREMENTS HEIGHT: 2880 MM MACHINE WEIGHT: 400 KG MEDIA MAIN ELECTRONIC CONNECTION: 400 V SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2DU7RUS
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-paddle dryer reactotherm (1x), make krauss maffei, type rtd-30 / rtc-60, no 91085/1 (km order 361 704/1), new 1992, material stainless steel (1.4571), capacity 40 ltr, trough sizes dia. 270x650mm, inlet dia. 150mm, outlet dia. 40mm, working pressure vac/6 bar, with jacket (5 + 4,6 ltr), working pressure 25 bar, shaft can be heated (0,5 ltr), working pressure 25 bar, max. temperature 400 degr. c., with adjustable packing glands, motor 18,5 kw, 400 volt, mounted on frame , with filter type mf 0,5 m2, floorspace 3,3x1,4 m, total height 3,5 m, weight 2000 kgpaddle dryersdryers > paddle dryers PADDLE DRYER REACTOTHERM (1X), MAKE KRAUSS MAFFEI, TYPE RTD-30 / RTC-60, NO 91085/1 (KM ORDER 361 704/1), NEW 1992, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 40 LTR, TROUGH SIZES DIA. 270X650MM, INLET DIA. 150MM, OUTLET DIA. 40MM, WORKING PRESSURE VAC/6 BAR, WITH JACKET (5 + 4,6 LTR), WORKING PRESSURE 25 BAR, SHAFT CAN BE HEATED (0,5 LTR), WORKING PRESSURE 25 BAR, MAX. TEMPERATURE 400 DEGR. C., WITH ADJUSTABLE PACKING GLANDS, MOTOR 18,5 KW, 400 VOLT, MOUNTED ON FRAME , WITH FILTER TYPE MF 0,5 M2, FLOORSPACE 3,3X1,4 M, TOTAL HEIGHT 3,5 M, WEIGHT 2000 KGPADDLE DRYERSDRYERS > PADDLE DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-krauss maffei 80 ton. injection molding

type km 80-520 c1
construction year 2002
dbb 405x405 mm.
screw diameter 40
moving plane stroke 500
calculated injection volume 217
1 jack
n.3 air spray
machine certified for good conditions
can be seen running with client’s mould, previous appointment KRAUSS MAFFEI 80 TON. INJECTION MOLDING TYPE KM 80-520 C1 CONSTRUCTION YEAR 2002 DBB 405X405 MM. SCREW DIAMETER 40 MOVING PLANE STROKE 500 CALCULATED INJECTION VOLUME 217 1 JACK N.3 AIR SPRAY MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-peeler centrifuge (1x), make krauss maffei ag münchen, type hz-630 ph, no 11643, new 1997, material hastelloy (2.4602), basket sizes dia. 630x330mm, max. loading weight 52 kg, with hydraulic unit, motor 1,5 kw, 400 volt (ex), max. basket speed 2365 rpm, motor 22 kw, 400 volt (ex), with scraper, mounted on foundation plate, floorspace 2,5x1,5 m, total height 1,8 mpeeling centrifugescentrifuges > peeling centrifuges PEELER CENTRIFUGE (1X), MAKE KRAUSS MAFFEI AG MüNCHEN, TYPE HZ-630 PH, NO 11643, NEW 1997, MATERIAL HASTELLOY (2.4602), BASKET SIZES DIA. 630X330MM, MAX. LOADING WEIGHT 52 KG, WITH HYDRAULIC UNIT, MOTOR 1,5 KW, 400 VOLT (EX), MAX. BASKET SPEED 2365 RPM, MOTOR 22 KW, 400 VOLT (EX), WITH SCRAPER, MOUNTED ON FOUNDATION PLATE, FLOORSPACE 2,5X1,5 M, TOTAL HEIGHT 1,8 MPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-krauss maffei 80 ton. injection molding

km 80-390 c1
construction year 2001
dbb 405x405 mm.
screw diameter 40 mm.
calculated injection volume 204
moving plane stroke 500
n.3 air spray
machine certified for good conditions
can be seen running with client’s mould, previous appointment KRAUSS MAFFEI 80 TON. INJECTION MOLDING KM 80-390 C1 CONSTRUCTION YEAR 2001 DBB 405X405 MM. SCREW DIAMETER 40 MM. CALCULATED INJECTION VOLUME 204 MOVING PLANE STROKE 500 N.3 AIR SPRAY MACHINE CERTIFIED FOR GOOD CONDITIONS CAN BE SEEN RUNNING WITH CLIENT’S MOULD, PREVIOUS APPOINTMENT
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-peeler centrifuge (1x), make krauss maffei, type hz-630 ph (pharma), no 60000239, new 2000, material hastelloy c-22 (2.4602), basket sizes dia. 630x315mm, wall thickness 15mm, max. loading weight 54 kg, motor 18,5 kw, 400 volt (ex), max. basket speed 2270 rpm, with scraper, hydraulic operated, with hydraulic unit, mounted on frame, with switchgear, floorspace 2,8x1,8 m, total height 2,4 m, weight 3500 kgpeeling centrifugescentrifuges > peeling centrifuges PEELER CENTRIFUGE (1X), MAKE KRAUSS MAFFEI, TYPE HZ-630 PH (PHARMA), NO 60000239, NEW 2000, MATERIAL HASTELLOY C-22 (2.4602), BASKET SIZES DIA. 630X315MM, WALL THICKNESS 15MM, MAX. LOADING WEIGHT 54 KG, MOTOR 18,5 KW, 400 VOLT (EX), MAX. BASKET SPEED 2270 RPM, WITH SCRAPER, HYDRAULIC OPERATED, WITH HYDRAULIC UNIT, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE 2,8X1,8 M, TOTAL HEIGHT 2,4 M, WEIGHT 3500 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-krauss maffei 650-1900-520 cz (2003)

overview
brand: krauss maffei
model: 650-1900-520 cz
application type: injection moulding
machine type: injection moulding machines
availability: immediately
production year: 2003
location: germany
origin country: germany
production hours:

general data
measurements width: 9830 mm
measurements depth: 2760 mm
measurements height: 2460 mm
machine weight: 40170 kg

control unit
brand: krauss maffei
model: mc4
cnc main language: german
cnc language customizable: yes

injection unit
screw diameter: 70 mm
shot weight: 998 g/ps
stroke volume: 1097 cm³
injection pressure: 2389 bar
plasticising rate max: 83 g/s ps
screw speed: 218 1/min
heating capacity: 36 kw
adjustable heating zones: 7

clamping unit
clamping force: 6500 kn
opening stroke: 1750 mm
distance between bars: 1000x930 mm
mould height min: 600 mm
size of mold platens: 1490x1440 mm
ejector stroke: 1150 mm
ejector force for / back: 144 kn

media
internal cooling: yes

additional equipment
1: handling wittmann w632-0203 yom 2003 KRAUSS MAFFEI 650-1900-520 CZ (2003) OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 650-1900-520 CZ APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2003 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: GENERAL DATA MEASUREMENTS WIDTH: 9830 MM MEASUREMENTS DEPTH: 2760 MM MEASUREMENTS HEIGHT: 2460 MM MACHINE WEIGHT: 40170 KG CONTROL UNIT BRAND: KRAUSS MAFFEI MODEL: MC4 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 70 MM SHOT WEIGHT: 998 G/PS STROKE VOLUME: 1097 CM³ INJECTION PRESSURE: 2389 BAR PLASTICISING RATE MAX: 83 G/S PS SCREW SPEED: 218 1/MIN HEATING CAPACITY: 36 KW ADJUSTABLE HEATING ZONES: 7 CLAMPING UNIT CLAMPING FORCE: 6500 KN OPENING STROKE: 1750 MM DISTANCE BETWEEN BARS: 1000X930 MM MOULD HEIGHT MIN: 600 MM SIZE OF MOLD PLATENS: 1490X1440 MM EJECTOR STROKE: 1150 MM EJECTOR FORCE FOR / BACK: 144 KN MEDIA INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: HANDLING WITTMANN W632-0203 YOM 2003
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-paddle dryer reactotherm (1x), make kraus maffei, type rtd-8 (total heating surface 0,28 m2), no 8603, new 1990, material stainless steel (1.4571), capacity 8 ltr, trough sizes dia.170x375mm, working pressure vac/10 bar, test pressure 13 bar, with jacket (2 ltr), working pressure 16 bar, test pressure 22,1 bar, shaft can be heated (1 ltr), max. temperature 350 degr. c., motor 7,5 kw, 500 volt (ex), with variable speed drive (frequency inverter), mounted on frame, floorspace 1,8x0,9 m, total height 1,8 m, weight 700 kgpaddle dryersdryers > paddle dryers PADDLE DRYER REACTOTHERM (1X), MAKE KRAUS MAFFEI, TYPE RTD-8 (TOTAL HEATING SURFACE 0,28 M2), NO 8603, NEW 1990, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 8 LTR, TROUGH SIZES DIA.170X375MM, WORKING PRESSURE VAC/10 BAR, TEST PRESSURE 13 BAR, WITH JACKET (2 LTR), WORKING PRESSURE 16 BAR, TEST PRESSURE 22,1 BAR, SHAFT CAN BE HEATED (1 LTR), MAX. TEMPERATURE 350 DEGR. C., MOTOR 7,5 KW, 500 VOLT (EX), WITH VARIABLE SPEED DRIVE (FREQUENCY INVERTER), MOUNTED ON FRAME, FLOORSPACE 1,8X0,9 M, TOTAL HEIGHT 1,8 M, WEIGHT 700 KGPADDLE DRYERSDRYERS > PADDLE DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-krauss maffei 650-2300 b2 (1995)

overview
brand: krauss maffei
model: 650-2300 b2
application type: injection moulding
machine type: injection moulding machines
availability: immediately
production year: 1995
location: germany
origin country: germany
production hours:

general data
measurements width: 12420 mm
measurements depth: 3080 mm
measurements height: 2400 mm
machine weight: 45500 kg

control unit
brand: krauss maffei
model: mc3
cnc main language: german
cnc language customizable: yes

injection unit
screw diameter: 80 mm
shot weight: 1286 g/ps
injection pressure: 1626 bar
plasticising rate max: 137 g/s ps
screw speed: 277 1/min
heating capacity: 45 kw
adjustable heating zones: 7
nozzle pressure: 172.5 kn

clamping unit
clamping force: 6500 kn
opening stroke: 1150 mm
max open daylight: 1710 mm
distance between bars: 1000x900 mm
mould height min: 560 mm
size of mold platens: 1440x1350 mm
ejector stroke: 250 mm
ejector force for / back: 265 kn

media
power consumption: 110 kva

additional equipment
1: handling wittmann KRAUSS MAFFEI 650-2300 B2 (1995) OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 650-2300 B2 APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1995 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: GENERAL DATA MEASUREMENTS WIDTH: 12420 MM MEASUREMENTS DEPTH: 3080 MM MEASUREMENTS HEIGHT: 2400 MM MACHINE WEIGHT: 45500 KG CONTROL UNIT BRAND: KRAUSS MAFFEI MODEL: MC3 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 80 MM SHOT WEIGHT: 1286 G/PS INJECTION PRESSURE: 1626 BAR PLASTICISING RATE MAX: 137 G/S PS SCREW SPEED: 277 1/MIN HEATING CAPACITY: 45 KW ADJUSTABLE HEATING ZONES: 7 NOZZLE PRESSURE: 172.5 KN CLAMPING UNIT CLAMPING FORCE: 6500 KN OPENING STROKE: 1150 MM MAX OPEN DAYLIGHT: 1710 MM DISTANCE BETWEEN BARS: 1000X900 MM MOULD HEIGHT MIN: 560 MM SIZE OF MOLD PLATENS: 1440X1350 MM EJECTOR STROKE: 250 MM EJECTOR FORCE FOR / BACK: 265 KN MEDIA POWER CONSUMPTION: 110 KVA ADDITIONAL EQUIPMENT 1: HANDLING WITTMANN
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-peeler centrifuge (1x), make krauss maffei, type hz-63, no 5952, new 1968, material stainless steel (1.4571), basket sizes dia. 630x315mm, wall thickness 15mm, max. loading weight 43 kg, hydraulic drive, with hydraulic unit, max. basket speed 2400 rpm, with scraper, manual operated, mounted on foundation plate, floorspace 2,0x1,7 m, total height 1,9 mpeeling centrifugescentrifuges > peeling centrifuges PEELER CENTRIFUGE (1X), MAKE KRAUSS MAFFEI, TYPE HZ-63, NO 5952, NEW 1968, MATERIAL STAINLESS STEEL (1.4571), BASKET SIZES DIA. 630X315MM, WALL THICKNESS 15MM, MAX. LOADING WEIGHT 43 KG, HYDRAULIC DRIVE, WITH HYDRAULIC UNIT, MAX. BASKET SPEED 2400 RPM, WITH SCRAPER, MANUAL OPERATED, MOUNTED ON FOUNDATION PLATE, FLOORSPACE 2,0X1,7 M, TOTAL HEIGHT 1,9 MPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-connected load: 18kw, controls: krauss maffei, weight: 2.3t.  CONNECTED LOAD: 18KW, CONTROLS: KRAUSS MAFFEI, WEIGHT: 2.3T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-peeler centrifuge (1x), make krauss maffei, type hz-63 si, no 9352, new 1982, material stainless steel (1.4571/1.4581), basket sizes dia. 630x300mm, wall thickness 15mm, max. loading weight 50 kg, hydraulic drive, with hydraulic unit, motor 18,5 kw, 380 volt (ex), max. basket speed 2400 rpm, with scraper, motor 1,3 kw, 380-420/655-725 volt (ex), mounted on foundation plate, floorspace 2,5x1,8 m, total height 1,7 m, weight 4000 kgpeeling centrifugescentrifuges > peeling centrifuges PEELER CENTRIFUGE (1X), MAKE KRAUSS MAFFEI, TYPE HZ-63 SI, NO 9352, NEW 1982, MATERIAL STAINLESS STEEL (1.4571/1.4581), BASKET SIZES DIA. 630X300MM, WALL THICKNESS 15MM, MAX. LOADING WEIGHT 50 KG, HYDRAULIC DRIVE, WITH HYDRAULIC UNIT, MOTOR 18,5 KW, 380 VOLT (EX), MAX. BASKET SPEED 2400 RPM, WITH SCRAPER, MOTOR 1,3 KW, 380-420/655-725 VOLT (EX), MOUNTED ON FOUNDATION PLATE, FLOORSPACE 2,5X1,8 M, TOTAL HEIGHT 1,7 M, WEIGHT 4000 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-connected load: 19.15kw, controls: krauss maffei, weight: 2.3t.  CONNECTED LOAD: 19.15KW, CONTROLS: KRAUSS MAFFEI, WEIGHT: 2.3T.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-peeler centrifuge (1x), make krauss maffei, type hz-25, no 9876, material stainless steel, basket sizes dia. 250x125mm, with 2nd siphon basket, max. loading weight 4,95 kg, motor 2,2 kw, 500 volt (ex), with variable speed drive, max. basket speed 4000 rpm, with scraper, manual operated, mounted on frame, floorspace 0,9x0,8 m, total height 1,3 m, weight 350 kgpeeling centrifugescentrifuges > peeling centrifuges PEELER CENTRIFUGE (1X), MAKE KRAUSS MAFFEI, TYPE HZ-25, NO 9876, MATERIAL STAINLESS STEEL, BASKET SIZES DIA. 250X125MM, WITH 2ND SIPHON BASKET, MAX. LOADING WEIGHT 4,95 KG, MOTOR 2,2 KW, 500 VOLT (EX), WITH VARIABLE SPEED DRIVE, MAX. BASKET SPEED 4000 RPM, WITH SCRAPER, MANUAL OPERATED, MOUNTED ON FRAME, FLOORSPACE 0,9X0,8 M, TOTAL HEIGHT 1,3 M, WEIGHT 350 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-overview
brand: krauss maffei
model: 420-1900 c2
application type: injection moulding 
machine type: injection moulding machines 
availability: immediately
production year: 2006
location: czech republic
origin country: germany
production hours: 52000

general data
machine weight: 23090 kg

control unit
brand: krauss maffei
model: mc 5
cnc language customizable: yes

injection unit
screw diameter: 60 mm 
stroke volume: 769 cm³
injection pressure: 2420 bar 
screw speed: 285 1/min 
heating capacity: 75 kw

clamping unit
clamping force: 4200 kn

additional equipment
1: robot sepro s3

see full technical specifications of this machine at: abc://bit.ly/2dfdryj OVERVIEW BRAND: KRAUSS MAFFEI MODEL: 420-1900 C2 APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2006 LOCATION: CZECH REPUBLIC ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 52000 GENERAL DATA MACHINE WEIGHT: 23090 KG CONTROL UNIT BRAND: KRAUSS MAFFEI MODEL: MC 5 CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 60 MM STROKE VOLUME: 769 CM³ INJECTION PRESSURE: 2420 BAR SCREW SPEED: 285 1/MIN HEATING CAPACITY: 75 KW CLAMPING UNIT CLAMPING FORCE: 4200 KN ADDITIONAL EQUIPMENT 1: ROBOT SEPRO S3 SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2DFDRYJ
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-basket centrifuge (1x), make krauss maffei, type vzo-125/2,5, no 9708, new 1984, material stainless steel (1.4571), perforated basket, basket sizes dia. 1250x630mm, wall thickness 12mm, max. loading weight 485 kg, with scraper, hydraulic operated (motor hydr. unit 0,55 kw 220/380 volt ex), liquid outlet 165x165mm, motor 17,0/30,0 kw, 390 volt (ex), max. basket speed 950 rpm, mounted on foundation plate, floorspace 2,4x1,8 m, total height 2,8 mbasket centrifugescentrifuges > basket centrifuges BASKET CENTRIFUGE (1X), MAKE KRAUSS MAFFEI, TYPE VZO-125/2,5, NO 9708, NEW 1984, MATERIAL STAINLESS STEEL (1.4571), PERFORATED BASKET, BASKET SIZES DIA. 1250X630MM, WALL THICKNESS 12MM, MAX. LOADING WEIGHT 485 KG, WITH SCRAPER, HYDRAULIC OPERATED (MOTOR HYDR. UNIT 0,55 KW 220/380 VOLT EX), LIQUID OUTLET 165X165MM, MOTOR 17,0/30,0 KW, 390 VOLT (EX), MAX. BASKET SPEED 950 RPM, MOUNTED ON FOUNDATION PLATE, FLOORSPACE 2,4X1,8 M, TOTAL HEIGHT 2,8 MBASKET CENTRIFUGESCENTRIFUGES > BASKET CENTRIFUGES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-in transitus s.l we have a lot of diferents hydraulic valves for injection moulding machines, diferet brands like arburg, demag, krauss maffei, engel, etc. ask us via e-mail in transitus@transitus.net or visit our website where we have a big stock of it. IN TRANSITUS S.L WE HAVE A LOT OF DIFERENTS HYDRAULIC VALVES FOR INJECTION MOULDING MACHINES, DIFERET BRANDS LIKE ARBURG, DEMAG, KRAUSS MAFFEI, ENGEL, ETC. ASK US VIA E-MAIL IN TRANSITUS@TRANSITUS.NET OR VISIT OUR WEBSITE WHERE WE HAVE A BIG STOCK OF IT.
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-screw size:45 mm<br/>injection shot weight in polysterol:250 g<br/>clamping force:800 kn<br/>: <br/>injection unit: <br/>screw size:45 mm<br/>max. swept volumne:275 cm³<br/>injection shot weight in polysterol:250 g/ps<br/>injection pressure:1.878 bar<br/>clamping unit: <br/>clamping force:80 t<br/>tie bar distance:405 x 405 mm<br/>mould hight min.:250 mm<br/>opening stroke:500 mm<br/>centering ejector plate:125 mm<br/>centering nozzleplate:125 mm<br/>control: <br/>microprocessor control:mc4 <br/>screen text:deutsch / german <br/>manual:deutsch / german <br/>equipment: <br/>robot interface:euromap 12 <br/>core drawing:2 x <br/>other datas: <br/>total heating capacity:11,0 kw<br/>total connection power:29,5 kw<br/>total weight:3.500 kg<br/>dimension l x w x h:4,3 x 1.4 x 2,0 m<br/><br/> terms of payment: 100 % prior to delivery SCREW SIZE:45 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:250 G
CLAMPING FORCE:800 KN
:
INJECTION UNIT:
SCREW SIZE:45 MM
MAX. SWEPT VOLUMNE:275 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:250 G/PS
INJECTION PRESSURE:1.878 BAR
CLAMPING UNIT:
CLAMPING FORCE:80 T
TIE BAR DISTANCE:405 X 405 MM
MOULD HIGHT MIN.:250 MM
OPENING STROKE:500 MM
CENTERING EJECTOR PLATE:125 MM
CENTERING NOZZLEPLATE:125 MM
CONTROL:
MICROPROCESSOR CONTROL:MC4
SCREEN TEXT:DEUTSCH / GERMAN
MANUAL:DEUTSCH / GERMAN
EQUIPMENT:
ROBOT INTERFACE:EUROMAP 12
CORE DRAWING:2 X
OTHER DATAS:
TOTAL HEATING CAPACITY:11,0 KW
TOTAL CONNECTION POWER:29,5 KW
TOTAL WEIGHT:3.500 KG
DIMENSION L X W X H:4,3 X 1.4 X 2,0 M

TERMS OF PAYMENT: 100 % PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Año de construcción: usado
Ubicación: Land-in transitus s.l. we havew a lot of diferent electronic cards for injection moulding machines like arburg, demag,krauss-maffei, engel. please ask us via e-mail in transitus@transitus.net or visit our website and the big stock of it www.transitus.es IN TRANSITUS S.L. WE HAVEW A LOT OF DIFERENT ELECTRONIC CARDS FOR INJECTION MOULDING MACHINES LIKE ARBURG, DEMAG,KRAUSS-MAFFEI, ENGEL. PLEASE ASK US VIA E-MAIL IN TRANSITUS@TRANSITUS.NET OR VISIT OUR WEBSITE AND THE BIG STOCK OF IT WWW.TRANSITUS.ES
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-screw size: 90 x 30d mm<br/>capacity: 350-400 kg/h<br/>drive: 132 kw<br/>l/d:  0<br/>screw speeds: 110 u/min<br/>extrusion height: 1000 mm<br/>dimensions of the machine ca.: 4,1x1,8x2,45 m<br/>weight: 4,5 t<br/>operating hours: 45.300 h<br/>cylinder zones: 4<br/>adapter zone: 1<br/>tool zones: 7<br/>melt temperature display<br/>feed bush. grooved<br/>accessories: mixing part, granule funnel<br/><br/><br/><br/><br/> SCREW SIZE: 90 X 30D MM
CAPACITY: 350-400 KG/H
DRIVE: 132 KW
L/D: 0
SCREW SPEEDS: 110 U/MIN
EXTRUSION HEIGHT: 1000 MM
DIMENSIONS OF THE MACHINE CA.: 4,1X1,8X2,45 M
WEIGHT: 4,5 T
OPERATING HOURS: 45.300 H
CYLINDER ZONES: 4
ADAPTER ZONE: 1
TOOL ZONES: 7
MELT TEMPERATURE DISPLAY
FEED BUSH. GROOVED
ACCESSORIES: MIXING PART, GRANULE FUNNEL




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-year of construction 1998
clamping force: 250 to.
screw diameter: 60 mm
injection pressure: 2000 bar
stroke volume: 679 cm³
shot weight: 618 g
tie bar distance: 630 x 630 mm
size of platens: 995 x 1050 mm
mould installation height: 330 mm

robot engel of year of manufacture 2002 YEAR OF CONSTRUCTION 1998 CLAMPING FORCE: 250 TO. SCREW DIAMETER: 60 MM INJECTION PRESSURE: 2000 BAR STROKE VOLUME: 679 CM³ SHOT WEIGHT: 618 G TIE BAR DISTANCE: 630 X 630 MM SIZE OF PLATENS: 995 X 1050 MM MOULD INSTALLATION HEIGHT: 330 MM ROBOT ENGEL OF YEAR OF MANUFACTURE 2002
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-closing pressure: 16000 kn<br/>clamping plate: 2510 x 2080 mm<br/>cylinder head volume: 5881 cm³<br/>injection pressure: 1960 bar<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> CLOSING PRESSURE: 16000 KN
CLAMPING PLATE: 2510 X 2080 MM
CYLINDER HEAD VOLUME: 5881 CM³
INJECTION PRESSURE: 1960 BAR



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-there are two machines available, including work platform, 2x regenerated polyol pumps, 3x mixing heads, control cabinet, container and accessories, machines can be moved on a track.  THERE ARE TWO MACHINES AVAILABLE, INCLUDING WORK PLATFORM, 2X REGENERATED POLYOL PUMPS, 3X MIXING HEADS, CONTROL CABINET, CONTAINER AND ACCESSORIES, MACHINES CAN BE MOVED ON A TRACK.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-closing pressure: 30000 kn<br/>clamping plate: 2800 x 2500 mm<br/>cylinder head volume: 7240 cm³<br/>injection pressure:  1790 bar<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> CLOSING PRESSURE: 30000 KN
CLAMPING PLATE: 2800 X 2500 MM
CYLINDER HEAD VOLUME: 7240 CM³
INJECTION PRESSURE: 1790 BAR



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-overview:
brand: krauss maffei
model: 160-750 ex
application type: injection moulding
availability: 01/10/2018
construction year: 2010
production hours: 54001
location: spain

control unit:
brand: krauss maffei
model: mc5

injection unit:
screw diameter: 50 mm
shot weight: 357,6 g/ps
stroke volume: 393 cm³
injection pressure: 1982 bar
plasticizing rate max.: 62,2 g/s ps
screw speed: 458 1/min
nozzle pressure: 30 kn

clamping unit:
clamping force: 1600 kn
opening stroke: 450 mm
mould height min.: 300 mm
mould height max.: 550 mm
ejector stroke: 150 mm
ejector force for / back: 22 kn


see full technical specifications of this machine at: abc://bit.ly/2g7dt6p
 OVERVIEW: BRAND: KRAUSS MAFFEI MODEL: 160-750 EX APPLICATION TYPE: INJECTION MOULDING AVAILABILITY: 01/10/2018 CONSTRUCTION YEAR: 2010 PRODUCTION HOURS: 54001 LOCATION: SPAIN CONTROL UNIT: BRAND: KRAUSS MAFFEI MODEL: MC5 INJECTION UNIT: SCREW DIAMETER: 50 MM SHOT WEIGHT: 357,6 G/PS STROKE VOLUME: 393 CM³ INJECTION PRESSURE: 1982 BAR PLASTICIZING RATE MAX.: 62,2 G/S PS SCREW SPEED: 458 1/MIN NOZZLE PRESSURE: 30 KN CLAMPING UNIT: CLAMPING FORCE: 1600 KN OPENING STROKE: 450 MM MOULD HEIGHT MIN.: 300 MM MOULD HEIGHT MAX.: 550 MM EJECTOR STROKE: 150 MM EJECTOR FORCE FOR / BACK: 22 KN SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2G7DT6P
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-screw size:55 mm<br/>injection shot weight in polysterol:476 g<br/>clamping force:1500 kn<br/>: <br/>injection unit: <br/>screw size:55 mm<br/>max. swept volumne:523 cm³<br/>injection shot weight in polysterol:476 g/ps<br/>injection pressure:1.904 bar<br/>: <br/>clamping unit: <br/>clamping force:150 t<br/>tie bar distance:500 x 500 mm<br/>mould hight min.:300 mm<br/>opening stroke:900 mm<br/>: <br/>control: <br/>microprocessor control:mc4 <br/>screen text:deutsch / german <br/>manual:deutsch / german <br/>: <br/>equipment: <br/>robot interface:euromap 12 <br/>core pull:2 x  <br/>: <br/>other datas: <br/>pump drive power:22,0 kw<br/>total connection power:35,0 kw<br/>total weight:7.600 kg<br/>dimension l x w x h:5,0 x 1,5 x 2,2 m<br/><br/> terms of payment: 100% prior to delivery SCREW SIZE:55 MM
INJECTION SHOT WEIGHT IN POLYSTEROL:476 G
CLAMPING FORCE:1500 KN
:
INJECTION UNIT:
SCREW SIZE:55 MM
MAX. SWEPT VOLUMNE:523 CM³
INJECTION SHOT WEIGHT IN POLYSTEROL:476 G/PS
INJECTION PRESSURE:1.904 BAR
:
CLAMPING UNIT:
CLAMPING FORCE:150 T
TIE BAR DISTANCE:500 X 500 MM
MOULD HIGHT MIN.:300 MM
OPENING STROKE:900 MM
:
CONTROL:
MICROPROCESSOR CONTROL:MC4
SCREEN TEXT:DEUTSCH / GERMAN
MANUAL:DEUTSCH / GERMAN
:
EQUIPMENT:
ROBOT INTERFACE:EUROMAP 12
CORE PULL:2 X
:
OTHER DATAS:
PUMP DRIVE POWER:22,0 KW
TOTAL CONNECTION POWER:35,0 KW
TOTAL WEIGHT:7.600 KG
DIMENSION L X W X H:5,0 X 1,5 X 2,2 M

TERMS OF PAYMENT: 100% PRIOR TO DELIVERY
Vendedor: Complast Gmbh
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KRAUSS types: