12 ofertas

Año de construcción: usado
Ubicación: Land-inlet diameter: 9.5-35mm, continuous reduction of diameter: 20-25% each calibre, pointing range: 80-200mm, roller rotational speed: 35-40/min, working height: 1100mm, motor power: 22kw, length: 850mm, width: 1600mm, weight: 2.2t, machine was scarcely used.  INLET DIAMETER: 9.5-35MM, CONTINUOUS REDUCTION OF DIAMETER: 20-25% EACH CALIBRE, POINTING RANGE: 80-200MM, ROLLER ROTATIONAL SPEED: 35-40/MIN, WORKING HEIGHT: 1100MM, MOTOR POWER: 22KW, LENGTH: 850MM, WIDTH: 1600MM, WEIGHT: 2.2T, MACHINE WAS SCARCELY USED.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-from: 4 mm<br/>up to: 16 mm<br/>quality: mit shear <br/>anspitzwalzmaschine<br/><br/>fabr. krollmann<br/>type. dwu 3<br/>year of construction. 1972<br/><br/>work area. 4 - 16 mm<br/>13 stitches<br/><br/>with laterally shear<br/><br/>drive motor. 220 / 380v, 3kw, 940rpm<br/><br/><br/><br/><br/> FROM: 4 MM
UP TO: 16 MM
QUALITY: MIT SHEAR
ANSPITZWALZMASCHINE

FABR. KROLLMANN
TYPE. DWU 3
YEAR OF CONSTRUCTION. 1972

WORK AREA. 4 - 16 MM
13 STITCHES

WITH LATERALLY SHEAR

DRIVE MOTOR. 220 / 380V, 3KW, 940RPM




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-wire diameter range: 1,8 -9,0 mm<br/> <br>number of kalibers: 13; verry good WIRE DIAMETER RANGE: 1,8 -9,0 MM

NUMBER OF KALIBERS: 13; VERRY GOOD
Vendedor: WEBER KG
Año de construcción: usado
Ubicación: Land-tube diameter: max. 80 mm<br/>number of tools: 4 <br/>pressure capacity max.: 800 kn t<br/>total wight: ca. 4 t<br/>hydraulic tube-pointing press<br/><br/>constr. krollmann<br/>type    hra 80/80-3<br/>year    2008<br/><br/>the pointing press is for the production of drawing-out devices of tubes<br/><br/>max. outer Ø of the tube 80 mm<br/>press force 800 kn at 250 bar<br/>pointing time approx.4 sec.- depending on tube diameter<br/>tool length 250 mm<br/><br/>hydraulic drive 45 kw, 1500 rpm<br/><br/>electrical with siemens simatic s7-300                     <br/>control system<br/>operating voltage. 500v ac, 50hz<br/>control voltage.   230v ac / 24v dc<br/><br/>the unit has approx. 3500 hours of operation.<br/><br/>total weight of the line approx. 4 to.<br/><br/><br/><br/><br/><br/> TUBE DIAMETER: MAX. 80 MM
NUMBER OF TOOLS: 4
PRESSURE CAPACITY MAX.: 800 KN T
TOTAL WIGHT: CA. 4 T
HYDRAULIC TUBE-POINTING PRESS

CONSTR. KROLLMANN
TYPE HRA 80/80-3
YEAR 2008

THE POINTING PRESS IS FOR THE PRODUCTION OF DRAWING-OUT DEVICES OF TUBES

MAX. OUTER Ø OF THE TUBE 80 MM
PRESS FORCE 800 KN AT 250 BAR
POINTING TIME APPROX.4 SEC.- DEPENDING ON TUBE DIAMETER
TOOL LENGTH 250 MM

HYDRAULIC DRIVE 45 KW, 1500 RPM

ELECTRICAL WITH SIEMENS SIMATIC S7-300
CONTROL SYSTEM
OPERATING VOLTAGE. 500V AC, 50HZ
CONTROL VOLTAGE. 230V AC / 24V DC

THE UNIT HAS APPROX. 3500 HOURS OF OPERATION.

TOTAL WEIGHT OF THE LINE APPROX. 4 TO.





Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-from: 3 mm<br/>up to: 8 mm<br/>quality: with shear <br/>roll pointing machine<br/>with shear<br/><br/>fabr. krollmann<br/>type. dwu -0a/s<br/>year of construction. 1981<br/><br/>working range:<br/>     for profiles<br/>      steel. 6 - 3 mm Ø<br/>      ne. 8 - 3mm Ø<br/>roller pair with 6 stepps<br/><br/>motor.  500v,50hz,1kw,960u/min<br/><br/>weight. about 3oo kg  <br/><br/><br/><br/><br/> FROM: 3 MM
UP TO: 8 MM
QUALITY: WITH SHEAR
ROLL POINTING MACHINE
WITH SHEAR

FABR. KROLLMANN
TYPE. DWU -0A/S
YEAR OF CONSTRUCTION. 1981

WORKING RANGE:
FOR PROFILES
STEEL. 6 - 3 MM Ø
NE. 8 - 3MM Ø
ROLLER PAIR WITH 6 STEPPS

MOTOR. 500V,50HZ,1KW,960U/MIN

WEIGHT. ABOUT 3OO KG




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-from: 7 mm<br/>up to: 22 mm<br/>quality: h+v <br/>roll pointing machine<br/>in two levels<br/><br/>fabr. krollmann<br/>type. duw - 4 + v<br/>year of construction. 1980<br/><br/>working range:<br/>     steel. 16 - 5 mm Ø<br/>     ne.    17 - 5 mm Ø<br/><br/>motor.  380/660v,50hz,4kw,960u/min<br/><br/>weight. about 1,4 tons.  <br/><br/><br/><br/><br/> FROM: 7 MM
UP TO: 22 MM
QUALITY: H+V
ROLL POINTING MACHINE
IN TWO LEVELS

FABR. KROLLMANN
TYPE. DUW - 4 + V
YEAR OF CONSTRUCTION. 1980

WORKING RANGE:
STEEL. 16 - 5 MM Ø
NE. 17 - 5 MM Ø

MOTOR. 380/660V,50HZ,4KW,960U/MIN

WEIGHT. ABOUT 1,4 TONS.




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-from: 3 mm<br/>up to: 11 mm<br/>quality: flat, round with shear<br/>horizontal pointing machine  with lateral shear<br/><br/>constr.              krollmann <br/>type                  dwu-3/sfl + zv<br/>year                  1980<br/>condition            good<br/><br/>working range:<br/><br/>pass  round 10 passes:   11 to  3 mm Ø<br/>pass  flat        3 passes:   practical thickness max: 11 to 3 mm<br/>                                          bale width each  40 mm<br/><br/>roller-Ø                              approx. 90 mm<br/>roller width                        approx. 260 mm<br/><br/>with cylinder central adjustment (zv) for easy readjustment of the puncture <br/>dimensions and with master lubrication.<br/><br/>lateral shear:                       knife length 170 mm<br/><br/>motor:                                    4 kw, 1460 rpm, 380 v, 50 cycles<br/><br/>approx. measurements: width: 1050 mm x depth 850 mm x height 1300 mm.<br/><br/>weight                                   approx.  860 kg<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> FROM: 3 MM
UP TO: 11 MM
QUALITY: FLAT, ROUND WITH SHEAR
HORIZONTAL POINTING MACHINE WITH LATERAL SHEAR

CONSTR. KROLLMANN
TYPE DWU-3/SFL + ZV
YEAR 1980
CONDITION GOOD

WORKING RANGE:

PASS ROUND 10 PASSES: 11 TO 3 MM Ø
PASS FLAT 3 PASSES: PRACTICAL THICKNESS MAX: 11 TO 3 MM
BALE WIDTH EACH 40 MM

ROLLER-Ø APPROX. 90 MM
ROLLER WIDTH APPROX. 260 MM

WITH CYLINDER CENTRAL ADJUSTMENT (ZV) FOR EASY READJUSTMENT OF THE PUNCTURE
DIMENSIONS AND WITH MASTER LUBRICATION.

LATERAL SHEAR: KNIFE LENGTH 170 MM

MOTOR: 4 KW, 1460 RPM, 380 V, 50 CYCLES

APPROX. MEASUREMENTS: WIDTH: 1050 MM X DEPTH 850 MM X HEIGHT 1300 MM.

WEIGHT APPROX. 860 KG














Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-working range: 55 mm<br/>number of tools: 4 <br/>workpiece length: 250 mm<br/>hydraulic tube pointer<br/>(for tag ends on thin-wall tubestubes)<br/><br/>constr.:             krollmann<br/>type:                  hra 4/80<br/>year:                 1996<br/><br/>working range:       Ø  55 mm<br/>tool length               250 mm<br/>press force            800 kn<br/><br/>1 tool set (4 pcs) for the whole working range.  <br/><br/>hydraulic motor      11 kw<br/><br/>scope of delivery:<br/>===============<br/>-  main machine body<br/>-  hydraulic systems with electrical cabinet<br/><br/>total weightt:    approx.  2.3 to.<br/><br/><br/><br/><br/> WORKING RANGE: 55 MM
NUMBER OF TOOLS: 4
WORKPIECE LENGTH: 250 MM
HYDRAULIC TUBE POINTER
(FOR TAG ENDS ON THIN-WALL TUBESTUBES)

CONSTR.: KROLLMANN
TYPE: HRA 4/80
YEAR: 1996

WORKING RANGE: Ø 55 MM
TOOL LENGTH 250 MM
PRESS FORCE 800 KN

1 TOOL SET (4 PCS) FOR THE WHOLE WORKING RANGE.

HYDRAULIC MOTOR 11 KW

SCOPE OF DELIVERY:
===============
- MAIN MACHINE BODY
- HYDRAULIC SYSTEMS WITH ELECTRICAL CABINET

TOTAL WEIGHTT: APPROX. 2.3 TO.




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-tube diameter: max. 30 mm<br/>workpiece length: 250 mm<br/>number of tools: 4 <br/>hydraulic tube-pointing press<br/>with notching device<br/><br/>fabr. krollmann<br/>type. hra 30 / 20-3<br/>year. 1981<br/><br/>the pointing press is for the production of drawing-out devices of tubes<br/><br/>max. outside Ø of the tube 30 mm<br/><br/>pressure force. 00 kn at 250 bar<br/><br/>tool length. 250 mm<br/><br/>hydraulic drive. 5.5kw, 1500 rev / min<br/><br/>operating voltage. 500v ac, 50hz<br/><br/>total weight of the system. about 1.6 tons.<br/><br/><br/><br/><br/> TUBE DIAMETER: MAX. 30 MM
WORKPIECE LENGTH: 250 MM
NUMBER OF TOOLS: 4
HYDRAULIC TUBE-POINTING PRESS
WITH NOTCHING DEVICE

FABR. KROLLMANN
TYPE. HRA 30 / 20-3
YEAR. 1981

THE POINTING PRESS IS FOR THE PRODUCTION OF DRAWING-OUT DEVICES OF TUBES

MAX. OUTSIDE Ø OF THE TUBE 30 MM

PRESSURE FORCE. 00 KN AT 250 BAR

TOOL LENGTH. 250 MM

HYDRAULIC DRIVE. 5.5KW, 1500 REV / MIN

OPERATING VOLTAGE. 500V AC, 50HZ

TOTAL WEIGHT OF THE SYSTEM. ABOUT 1.6 TONS.




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-tube diameter: max. 30 mm<br/>workpiece length: 250 mm<br/>number of tools: 4 <br/>hydraulic tube-pointing press<br/>with notching device<br/><br/>fabr. krollmann<br/>type. hra 30 / 20-3<br/>year. 1981<br/><br/>the pointing press is for the production of drawing-out devices of tubes<br/><br/>max. outside Ø of the tube 30 mm<br/><br/>pressure force. 00 kn at 250 bar<br/><br/>tool length. 250 mm<br/><br/>hydraulic drive. 5.5kw, 1500 rev / min<br/><br/>operating voltage. 500v ac, 50hz<br/><br/>total weight of the system. about 1.6 tons.<br/><br/><br/><br/><br/> TUBE DIAMETER: MAX. 30 MM
WORKPIECE LENGTH: 250 MM
NUMBER OF TOOLS: 4
HYDRAULIC TUBE-POINTING PRESS
WITH NOTCHING DEVICE

FABR. KROLLMANN
TYPE. HRA 30 / 20-3
YEAR. 1981

THE POINTING PRESS IS FOR THE PRODUCTION OF DRAWING-OUT DEVICES OF TUBES

MAX. OUTSIDE Ø OF THE TUBE 30 MM

PRESSURE FORCE. 00 KN AT 250 BAR

TOOL LENGTH. 250 MM

HYDRAULIC DRIVE. 5.5KW, 1500 REV / MIN

OPERATING VOLTAGE. 500V AC, 50HZ

TOTAL WEIGHT OF THE SYSTEM. ABOUT 1.6 TONS.




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-from: 3 mm<br/>up to: 8 mm<br/>quality: ... <br/>roll pointing machine<br/><br/>fabr. krollmann<br/>type. duw -0a<br/>year of construction. 1981<br/><br/>working range:<br/>     steel. 6 - 3 mm Ø<br/>     ne.    8 - 3mm Ø<br/><br/>roller pair with 13 steps<br/><br/>motor.  500v,50hz,1kw,960u/min<br/><br/>weight. about 3oo kg  <br/><br/><br/><br/><br/> FROM: 3 MM
UP TO: 8 MM
QUALITY: ...
ROLL POINTING MACHINE

FABR. KROLLMANN
TYPE. DUW -0A
YEAR OF CONSTRUCTION. 1981

WORKING RANGE:
STEEL. 6 - 3 MM Ø
NE. 8 - 3MM Ø

ROLLER PAIR WITH 13 STEPS

MOTOR. 500V,50HZ,1KW,960U/MIN

WEIGHT. ABOUT 3OO KG




Vendedor: Teutenberg Maschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-working range: 10 - 62 mm<br/>quality: hydraulisch <br/>feeding device for round hammer machine<br/><br/>constr.: krollmann<br/>year:    2004<br/>hydraulical operated clamping- and feeding unit with material stop<br/>for hammer-and reducing machines up to 62 mm material diameter.<br/><br/>clamping force: up to max. 37 000 n variable<br/>feeding power: up to 27000 n max., variable<br/>feed: max. 800 mm <br/>pointing length: 250 mm<br/><br/>complete with:<br/>- seperate hydraulic power unit<br/>- motor power: 15 kw, 400 v, 50hz<br/>- electrical cabinet<br/>- command desk<br/>- additionally one sound isolating cabin for a hammer machine<br/><br/>total weight: approx. 2 to.<br/><br/><br/><br/><br/><br/> WORKING RANGE: 10 - 62 MM
QUALITY: HYDRAULISCH
FEEDING DEVICE FOR ROUND HAMMER MACHINE

CONSTR.: KROLLMANN
YEAR: 2004
HYDRAULICAL OPERATED CLAMPING- AND FEEDING UNIT WITH MATERIAL STOP
FOR HAMMER-AND REDUCING MACHINES UP TO 62 MM MATERIAL DIAMETER.

CLAMPING FORCE: UP TO MAX. 37 000 N VARIABLE
FEEDING POWER: UP TO 27000 N MAX., VARIABLE
FEED: MAX. 800 MM
POINTING LENGTH: 250 MM

COMPLETE WITH:
- SEPERATE HYDRAULIC POWER UNIT
- MOTOR POWER: 15 KW, 400 V, 50HZ
- ELECTRICAL CABINET
- COMMAND DESK
- ADDITIONALLY ONE SOUND ISOLATING CABIN FOR A HAMMER MACHINE

TOTAL WEIGHT: APPROX. 2 TO.





Vendedor: Teutenberg Maschinen GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more KROLLMANN types: