208 ofertas

Año de construcción: usado
Ubicación: Land-complete pet bottle filling line 5.500 bph

this complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. the line has filling non carbonated soft drinks in pet bottles cap pco 28 mm. frequent maintenance is still taking place (greasing and startup / test runs). it is completely installed and in excellent condition. dry end of the line is being used for repacking purpose. line has run 3 different bottle formats (biggest 2.0 liters). spare parts (limited) are available, all documentation is available. the line is in good condition, installed and powered and can be tested.

make: various, see details
built: 2006/2007 – installed 2007
capacity: up to 5.500 bph
container handling: pet, 8 oz to 2.0 liters
condition: good
running hours: 16500 hrs
power / voltage: 460 v / 60 hz

equipment included:

- bohm pressure vessel – 900 liters – type 2360
- aquafine uv desinfection unit
- kaeser air dryer + 40 bar air compressor – thp212 + csdx 137, 3580 l/min, 75.0 kw
- barter co2 filter – ebco 1500
- ingersoll rand – 7bar compressor
- 2x lmi dosing pumps and meters
- evapco cooling tower – pmc-220e
- membrafe amoniak membrame cooling – rl500-3
- 2x vilter amoniak compressors – zl46
- 1x pentair water filter
- pumps & filters (various)
- kosme preform hopper
- kosme preform elevating conveyor pfa 1500, 0.37 kw, 50 hz
- kosme preform alignment infeed conveyor
- kosme ksb 4l – linear blow moulder – 4 heads, 68 kw, 50 hz
- mta chiller for kosme blow moulder, 6 bar, 11.6 kw, 220 v / 60 hz
- mesal air conveyors, linear curves, 9 motors
- mesal manual outfeed airconveyor to labeler (height adjustment)
- trine wrap around labeler + glue pump
- mesal manual airconveyor infeed from labeler (height adjustment)
- mesal mixer for csd
- amoniak cooler mesal + alfa laval phe (m10-bwfm, 10 bar, 34.89 l)
- mesal rinser,filler,capper (tribloc 30/30/10) – manual infeed of caps
- mesal bottle conveyors + ss conveyor belts
- visial lightbox full bottle inspection (manual)
- control panel for conveyors + filler danfoss drives
- vitz packers, mechanical wrap only packer for 12 packs + heat tunnel, ht 74 de
- outfeed conveyor (manual palletizing)
- optional = 2x ss sugar dissolving tanks
- optional = 2x ss storage buffer tanks    COMPLETE PET BOTTLE FILLING LINE 5.500 BPH THIS COMPLETE LINE HAS BEEN BUILT IN 2006 AND 2007 – INSTALLED IN 2007 AND HAS BEEN TAKEN OUT OF SERVICE IN 2016. THE LINE HAS FILLING NON CARBONATED SOFT DRINKS IN PET BOTTLES CAP PCO 28 MM. FREQUENT MAINTENANCE IS STILL TAKING PLACE (GREASING AND STARTUP / TEST RUNS). IT IS COMPLETELY INSTALLED AND IN EXCELLENT CONDITION. DRY END OF THE LINE IS BEING USED FOR REPACKING PURPOSE. LINE HAS RUN 3 DIFFERENT BOTTLE FORMATS (BIGGEST 2.0 LITERS). SPARE PARTS (LIMITED) ARE AVAILABLE, ALL DOCUMENTATION IS AVAILABLE. THE LINE IS IN GOOD CONDITION, INSTALLED AND POWERED AND CAN BE TESTED. MAKE: VARIOUS, SEE DETAILS BUILT: 2006/2007 – INSTALLED 2007 CAPACITY: UP TO 5.500 BPH CONTAINER HANDLING: PET, 8 OZ TO 2.0 LITERS CONDITION: GOOD RUNNING HOURS: 16500 HRS POWER / VOLTAGE: 460 V / 60 HZ EQUIPMENT INCLUDED: - BOHM PRESSURE VESSEL – 900 LITERS – TYPE 2360 - AQUAFINE UV DESINFECTION UNIT - KAESER AIR DRYER + 40 BAR AIR COMPRESSOR – THP212 + CSDX 137, 3580 L/MIN, 75.0 KW - BARTER CO2 FILTER – EBCO 1500 - INGERSOLL RAND – 7BAR COMPRESSOR - 2X LMI DOSING PUMPS AND METERS - EVAPCO COOLING TOWER – PMC-220E - MEMBRAFE AMONIAK MEMBRAME COOLING – RL500-3 - 2X VILTER AMONIAK COMPRESSORS – ZL46 - 1X PENTAIR WATER FILTER - PUMPS & FILTERS (VARIOUS) - KOSME PREFORM HOPPER - KOSME PREFORM ELEVATING CONVEYOR PFA 1500, 0.37 KW, 50 HZ - KOSME PREFORM ALIGNMENT INFEED CONVEYOR - KOSME KSB 4L – LINEAR BLOW MOULDER – 4 HEADS, 68 KW, 50 HZ - MTA CHILLER FOR KOSME BLOW MOULDER, 6 BAR, 11.6 KW, 220 V / 60 HZ - MESAL AIR CONVEYORS, LINEAR CURVES, 9 MOTORS - MESAL MANUAL OUTFEED AIRCONVEYOR TO LABELER (HEIGHT ADJUSTMENT) - TRINE WRAP AROUND LABELER + GLUE PUMP - MESAL MANUAL AIRCONVEYOR INFEED FROM LABELER (HEIGHT ADJUSTMENT) - MESAL MIXER FOR CSD - AMONIAK COOLER MESAL + ALFA LAVAL PHE (M10-BWFM, 10 BAR, 34.89 L) - MESAL RINSER,FILLER,CAPPER (TRIBLOC 30/30/10) – MANUAL INFEED OF CAPS - MESAL BOTTLE CONVEYORS + SS CONVEYOR BELTS - VISIAL LIGHTBOX FULL BOTTLE INSPECTION (MANUAL) - CONTROL PANEL FOR CONVEYORS + FILLER DANFOSS DRIVES - VITZ PACKERS, MECHANICAL WRAP ONLY PACKER FOR 12 PACKS + HEAT TUNNEL, HT 74 DE - OUTFEED CONVEYOR (MANUAL PALLETIZING) - OPTIONAL = 2X SS SUGAR DISSOLVING TANKS - OPTIONAL = 2X SS STORAGE BUFFER TANKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-1 station, stainless steel, propan gas\r\nsizer: w/l  410, d 410, h 210 mm 1 STATION, STAINLESS STEEL, PROPAN GAS\R\NSIZER: W/L 410, D 410, H 210 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-filling line for csd and beer in pet bottles krones 4800 bph 
 
this pet line was installed in 2003 by krones, and is still in use until q2 of 2019. it has been filling beer and carbonated soft drinks in 1.0 to 2.5 liter bottles. the line is still installed and powered and can be dry tested. the blow molder needs thorough refurbishment, all other equipment are in good condition. the secondary packer has been used in shrink wrapping only, but it can be adapted for tray packing also. 
 
main technical data: 
 
manufacturer: 	krones (kosme), smi 
year: 	2003 
capacity: 	4000 bph, 1.0 ltr
	4600 bph, 1.5 ltr
	4000 bph, 2.0 and 2.5 ltr
neck format: 	pco 1810 long neck, 28 mm
operating hours: 	50 655 hrs 
control plc: 	siemens s7
 
main equipment: 
blow molder: 	kosme ksb 4000 serial no 4d117
flash pasteurizer: 	fisher eurocol 40 cgr, 60-220 hl/h, 16 bar, sn 27434 
filler: 	krones mecafill, tk-1440 vkp-pet 1.440-40-113 with 40 valves, 
k-121-756
rinser: 	krones variojet variojet 1.440-40-13, 40 nozzles, k-563-359
level inspector: 	stratec, toshiba d 0811 tubes  
labeler: 	krones contiroll 600-10, opp wrap-around label, hot melt glue 
data coder: 	domino 
secondary packer: 	smi lsk 30 t, 35 tact/h, shrink wrap and tray option, sn 8643 
 
 FILLING LINE FOR CSD AND BEER IN PET BOTTLES KRONES 4800 BPH THIS PET LINE WAS INSTALLED IN 2003 BY KRONES, AND IS STILL IN USE UNTIL Q2 OF 2019. IT HAS BEEN FILLING BEER AND CARBONATED SOFT DRINKS IN 1.0 TO 2.5 LITER BOTTLES. THE LINE IS STILL INSTALLED AND POWERED AND CAN BE DRY TESTED. THE BLOW MOLDER NEEDS THOROUGH REFURBISHMENT, ALL OTHER EQUIPMENT ARE IN GOOD CONDITION. THE SECONDARY PACKER HAS BEEN USED IN SHRINK WRAPPING ONLY, BUT IT CAN BE ADAPTED FOR TRAY PACKING ALSO. MAIN TECHNICAL DATA: MANUFACTURER: KRONES (KOSME), SMI YEAR: 2003 CAPACITY: 4000 BPH, 1.0 LTR 4600 BPH, 1.5 LTR 4000 BPH, 2.0 AND 2.5 LTR NECK FORMAT: PCO 1810 LONG NECK, 28 MM OPERATING HOURS: 50 655 HRS CONTROL PLC: SIEMENS S7 MAIN EQUIPMENT: BLOW MOLDER: KOSME KSB 4000 SERIAL NO 4D117 FLASH PASTEURIZER: FISHER EUROCOL 40 CGR, 60-220 HL/H, 16 BAR, SN 27434 FILLER: KRONES MECAFILL, TK-1440 VKP-PET 1.440-40-113 WITH 40 VALVES, K-121-756 RINSER: KRONES VARIOJET VARIOJET 1.440-40-13, 40 NOZZLES, K-563-359 LEVEL INSPECTOR: STRATEC, TOSHIBA D 0811 TUBES LABELER: KRONES CONTIROLL 600-10, OPP WRAP-AROUND LABEL, HOT MELT GLUE DATA CODER: DOMINO SECONDARY PACKER: SMI LSK 30 T, 35 TACT/H, SHRINK WRAP AND TRAY OPTION, SN 8643
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-steam peeling line 
steam peeler line
conveyor belt for the supply of potatoes to the destoner - destoner
- conveyor belt
- container for stones
- drum washing machine, brand schneider
- conveyor belt for the feeding of the potatoes into the steam peeler - steam peeler, brand odenberg, type orbit 750, yom 2008
volume: 750 liters, pressure: 14 bar
- screw conveyor, brand eima, built in 2005
- removal of potato peels, pkc, built in 2010
- brush washer, gouda
- screw conveyor, enbe, built in 1981
- cooling drum, brand eima, built in 2005 with ksb pump (2006) - transport pump for peeled potatoes
- controls for the peeling unit, spangler STEAM PEELING LINE STEAM PEELER LINE CONVEYOR BELT FOR THE SUPPLY OF POTATOES TO THE DESTONER - DESTONER - CONVEYOR BELT - CONTAINER FOR STONES - DRUM WASHING MACHINE, BRAND SCHNEIDER - CONVEYOR BELT FOR THE FEEDING OF THE POTATOES INTO THE STEAM PEELER - STEAM PEELER, BRAND ODENBERG, TYPE ORBIT 750, YOM 2008 VOLUME: 750 LITERS, PRESSURE: 14 BAR - SCREW CONVEYOR, BRAND EIMA, BUILT IN 2005 - REMOVAL OF POTATO PEELS, PKC, BUILT IN 2010 - BRUSH WASHER, GOUDA - SCREW CONVEYOR, ENBE, BUILT IN 1981 - COOLING DRUM, BRAND EIMA, BUILT IN 2005 WITH KSB PUMP (2006) - TRANSPORT PUMP FOR PEELED POTATOES - CONTROLS FOR THE PEELING UNIT, SPANGLER
Vendedor: Crezta Food Equipment
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-french fries line 4000 kg/h. 

calibrator by rollers
pre-heating first screw
pre-heating second screw
drum cooker
drum filter
fryer
holding belt
vibrating table
pre-cooler
pre-dryer
steam peeling line 
steam peeler line
conveyor belt for the supply of potatoes to the destoner - destoner
- conveyor belt
- container for stones
- drum washing machine, brand schneider
- conveyor belt for the feeding of the potatoes into the steam peeler - steam peeler, brand odenberg, type orbit 750, yom 2008
volume: 750 liters, pressure: 14 bar
- screw conveyor, brand eima, built in 2005
- removal of potato peels, pkc, built in 2010
- brush washer, gouda
- screw conveyor, enbe, built in 1981
- cooling drum, brand eima, built in 2005 with ksb pump (2006) - transport pump for peeled potatoes
- controls for the peeling unit, spangler
 FRENCH FRIES LINE 4000 KG/H. CALIBRATOR BY ROLLERS PRE-HEATING FIRST SCREW PRE-HEATING SECOND SCREW DRUM COOKER DRUM FILTER FRYER HOLDING BELT VIBRATING TABLE PRE-COOLER PRE-DRYER STEAM PEELING LINE STEAM PEELER LINE CONVEYOR BELT FOR THE SUPPLY OF POTATOES TO THE DESTONER - DESTONER - CONVEYOR BELT - CONTAINER FOR STONES - DRUM WASHING MACHINE, BRAND SCHNEIDER - CONVEYOR BELT FOR THE FEEDING OF THE POTATOES INTO THE STEAM PEELER - STEAM PEELER, BRAND ODENBERG, TYPE ORBIT 750, YOM 2008 VOLUME: 750 LITERS, PRESSURE: 14 BAR - SCREW CONVEYOR, BRAND EIMA, BUILT IN 2005 - REMOVAL OF POTATO PEELS, PKC, BUILT IN 2010 - BRUSH WASHER, GOUDA - SCREW CONVEYOR, ENBE, BUILT IN 1981 - COOLING DRUM, BRAND EIMA, BUILT IN 2005 WITH KSB PUMP (2006) - TRANSPORT PUMP FOR PEELED POTATOES - CONTROLS FOR THE PEELING UNIT, SPANGLER
Vendedor: Crezta Food Equipment
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine no. 307437
size: 40 x 57 cm  MACHINE NO. 307437 SIZE: 40 X 57 CM
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 98.500 €
Ubicación: Land-pressure booster plant for water supply. specifications: capacity: 40-1,000 m3/h / head: m 52, suction and pressure collector: dn 350 (pn10). description of the system: ksb pumps (1 x 30 kw and 3 x 75 kw), horizontal design, three-phase motors built on and frequency inverters, on frame ready for use mounted. including fittings and valves as well as electrical equipment and pump controller (plc control panel with connector for profibus dp). the system can be fitted together with the e-technology in a sea container. other informations: year of manufacture: 2018, the plant is available from july 2019   PRESSURE BOOSTER PLANT FOR WATER SUPPLY. SPECIFICATIONS: CAPACITY: 40-1,000 M3/H / HEAD: M 52, SUCTION AND PRESSURE COLLECTOR: DN 350 (PN10). DESCRIPTION OF THE SYSTEM: KSB PUMPS (1 X 30 KW AND 3 X 75 KW), HORIZONTAL DESIGN, THREE-PHASE MOTORS BUILT ON AND FREQUENCY INVERTERS, ON FRAME READY FOR USE MOUNTED. INCLUDING FITTINGS AND VALVES AS WELL AS ELECTRICAL EQUIPMENT AND PUMP CONTROLLER (PLC CONTROL PANEL WITH CONNECTOR FOR PROFIBUS DP). THE SYSTEM CAN BE FITTED TOGETHER WITH THE E-TECHNOLOGY IN A SEA CONTAINER. OTHER INFORMATIONS: YEAR OF MANUFACTURE: 2018, THE PLANT IS AVAILABLE FROM JULY 2019
Vendedor: Wasserwerk Gerauer Land
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 2.379 €
Ubicación: Land-pump housing + cover

mass bht mm:
700 x 760 x 600
 PUMP HOUSING + COVER MASS BHT MM: 700 X 760 X 600
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 2.399 €
Ubicación: Land-yhi2 conveying performance: q = 83 mâ³/h conveying height: h 40 m 8733240001 st 00117385 zn3804 c37x52 = mass bht mm:
650 x 640 x 550 dimensions flanges outside / inside mm:
220/100 200/80
 YHI2 CONVEYING PERFORMANCE: Q = 83 M³/H CONVEYING HEIGHT: H 40 M 8733240001 ST 00117385 ZN3804 C37X52 = MASS BHT MM: 650 X 640 X 550 DIMENSIONS FLANGES OUTSIDE / INSIDE MM: 220/100 200/80
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-vertical limbs pump in topfausfã¼hrungfã¶rderhã¶he: h = 25 m flow rate: q = 19m â³/hmaã?e bht approx. mm: 46102631 st1760 x 600 x 400maã?e flanges outside / inside mm: 200 / 100150 / 50  VERTICAL LIMBS PUMP IN TOPFAUSFüHRUNGFöRDERHöHE: H = 25 M FLOW RATE: Q = 19M ³/HMAÃ?E BHT APPROX. MM: 46102631 ST1760 X 600 X 400MAÃ?E FLANGES OUTSIDE / INSIDE MM: 200 / 100150 / 50
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 1.299 €
Ubicación: Land-ksb-no.: 46102307 yhib
delivery height: h = 110m flow rate: q = 50 mâ³/h

mass bht mm:
630 x 510 x 400 dimensions flanges outside / inside mm:
200 / 80
160 / 50
 KSB-NO.: 46102307 YHIB DELIVERY HEIGHT: H = 110M FLOW RATE: Q = 50 M³/H MASS BHT MM: 630 X 510 X 400 DIMENSIONS FLANGES OUTSIDE / INSIDE MM: 200 / 80 160 / 50
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 39.789 €
Ubicación: Land-flow rate: q = 540 mâ³/h conveying height: h = 212 m

plus pump casing part 101. 
weight approx. 10 t incl. frame

seriennumnmer: 8-g00-018834/1

mass bht mm:
1500 x 3500 x 1500

in caddy, ready for transport, crane to the loaded available
 FLOW RATE: Q = 540 M³/H CONVEYING HEIGHT: H = 212 M PLUS PUMP CASING PART 101. WEIGHT APPROX. 10 T INCL. FRAME SERIENNUMNMER: 8-G00-018834/1 MASS BHT MM: 1500 X 3500 X 1500 IN CADDY, READY FOR TRANSPORT, CRANE TO THE LOADED AVAILABLE
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 3.589 €
Ubicación: Land-flow rate: q = 105 mâ³/h conveying height: h = 150, 01 m serial number: 9971993545/000100/01 mass bht mm:
1000 x 545 x 390

dimensions flange approx. mm:
250 x 120
 FLOW RATE: Q = 105 M³/H CONVEYING HEIGHT: H = 150, 01 M SERIAL NUMBER: 9971993545/000100/01 MASS BHT MM: 1000 X 545 X 390 DIMENSIONS FLANGE APPROX. MM: 250 X 120
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 1.299 €
Ubicación: Land-remaining stock from power plant
was intended as a replacement pump for feuerlã¶schaufgaben

46102307
yhib
h = 110 m (head)
q = 50 mâ³/h (flow rate)
lp: h1kg310382

-with some spare sealing rings REMAINING STOCK FROM POWER PLANT WAS INTENDED AS A REPLACEMENT PUMP FOR FEUERLöSCHAUFGABEN 46102307 YHIB H = 110 M (HEAD) Q = 50 M³/H (FLOW RATE) LP: H1KG310382 -WITH SOME SPARE SEALING RINGS
Vendedor: Handeldienstleister
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-pet bottling line for beer manufacturer: 6000 fl / h - 2.0 l year: 2003, the system consists of: blow moulding machine: kosme ksb 4000 air conveyor: sipac rinser: krones variojet 40 filler: krones mecafill vkp 40 screw: with 10 heads for pco  28 pasteur: fishing 60-220 hl / h labeller: krones contiroll 600-10 schrumpfverpacker: smi - lsk 30t bottles - and gebindetransport: after layout 
 PET BOTTLING LINE FOR BEER MANUFACTURER: 6000 FL / H - 2.0 L YEAR: 2003, THE SYSTEM CONSISTS OF: BLOW MOULDING MACHINE: KOSME KSB 4000 AIR CONVEYOR: SIPAC RINSER: KRONES VARIOJET 40 FILLER: KRONES MECAFILL VKP 40 SCREW: WITH 10 HEADS FOR PCO 28 PASTEUR: FISHING 60-220 HL / H LABELLER: KRONES CONTIROLL 600-10 SCHRUMPFVERPACKER: SMI - LSK 30T BOTTLES - AND GEBINDETRANSPORT: AFTER LAYOUT
Vendedor: Mazuba GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 950 €
Ubicación: Land-standardised pump. low-pressure centrifugal pump STANDARDISED PUMP. LOW-PRESSURE CENTRIFUGAL PUMP
Vendedor: Auktionshaus Auktionspunkt . de
Año de construcción: usado
Precio: 500 €
Ubicación: Land-new ksb pump etabloc gn40
q 30-64 sqm / h h: 95-70m
also new with replacement pumps NEW KSB PUMP ETABLOC GN40 Q 30-64 SQM / H H: 95-70M ALSO NEW WITH REPLACEMENT PUMPS
Vendedor: Herr Voigt
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-standardised pump. low-pressure centrifugal pump STANDARDISED PUMP. LOW-PRESSURE CENTRIFUGAL PUMP
Vendedor: Auktionshaus Auktionspunkt . de
Año de construcción: usado
Ubicación: Land-blow molding machine kosme ksb 4000 
  
this blow molding machine was made by austrian kosme in 2000. it has four inline cavities and four heating modules. the machine is in fair condition with low operating hours and it was dismantled two years ago and placed in a warehouse. delivery includes preform feeding system with bunker, mta chiller and one 1.5-liter mold set.   
  
manufacturer	kosme / krones
manufacturer’s type	kosme ksb 4000 
manufacturing year	2000
serial number	40077
number of cavities	4 
number of heating modules	4
number of adjustment areas	8 
capacity	max 4,000 bph in 1.5 liter
total operating hours	29 942
bottles	pet cylindrical bottles 0.1 – 2.0 liters
neck format	pco 1881 - 28 mm
max bottle dimensions	diameter 110 mm, height 340 mm
control system	lenze
electric voltage 	400 v/ 50 hz, 100 a 
installed heating power	50 kw 
machine main dimensions	4200 x 1850 x 2200 (lxwxh)
machine weight	5500 kg 
  
 BLOW MOLDING MACHINE KOSME KSB 4000 THIS BLOW MOLDING MACHINE WAS MADE BY AUSTRIAN KOSME IN 2000. IT HAS FOUR INLINE CAVITIES AND FOUR HEATING MODULES. THE MACHINE IS IN FAIR CONDITION WITH LOW OPERATING HOURS AND IT WAS DISMANTLED TWO YEARS AGO AND PLACED IN A WAREHOUSE. DELIVERY INCLUDES PREFORM FEEDING SYSTEM WITH BUNKER, MTA CHILLER AND ONE 1.5-LITER MOLD SET. MANUFACTURER KOSME / KRONES MANUFACTURER’S TYPE KOSME KSB 4000 MANUFACTURING YEAR 2000 SERIAL NUMBER 40077 NUMBER OF CAVITIES 4 NUMBER OF HEATING MODULES 4 NUMBER OF ADJUSTMENT AREAS 8 CAPACITY MAX 4,000 BPH IN 1.5 LITER TOTAL OPERATING HOURS 29 942 BOTTLES PET CYLINDRICAL BOTTLES 0.1 – 2.0 LITERS NECK FORMAT PCO 1881 - 28 MM MAX BOTTLE DIMENSIONS DIAMETER 110 MM, HEIGHT 340 MM CONTROL SYSTEM LENZE ELECTRIC VOLTAGE 400 V/ 50 HZ, 100 A INSTALLED HEATING POWER 50 KW MACHINE MAIN DIMENSIONS 4200 X 1850 X 2200 (LXWXH) MACHINE WEIGHT 5500 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-standardised pump. low-pressure centrifugal pump STANDARDISED PUMP. LOW-PRESSURE CENTRIFUGAL PUMP
Vendedor: Auktionshaus Auktionspunkt . de
Año de construcción: usado
Precio: 550.000 €
Ubicación: Land-filling line krones / kosme pet 4500 bph for csd

the line was built by kosme (nowadays a part of krones) in 2007. it has been in water filling operation only less than 900 total operating hours and is still installed, powered and can be tested. line is also suitable for carbonated and non-carbonated soft drinks and waters. three sets of molds will be a part of this delivery. this line contains also mixer – carbonator which allows to produce carbonated soft drinks. condition is very good.

main characteristics of this line

manufacturer                             kosme / krones

manufacturing year                   2007

total operating hours                873 hours only

products                                   waters, csd

capacity                                  4500 bph in 1.5 liter pet

neck finish                              plastic scew pco 28 mm  

molds                                      2 l 47.5 gr, 1.5 l 39.5 gr and 0.5 l 20.5 gr

max co2 content                    8 gr / liter

max concentrate mix              1:7

electric suppy                         400v +/- 5% 50 hz +/- 0,5% 3ph+n+pe
 

list of main equipment, all made in year 2007

blow molding machine kosme ksb 3000 s1
          linear blow molding machine with capacity of 4500 bph in 1.5 liters

          equipped with kosmatic faulty pet bottle discharge system 

          includes preform feeding system and mta tae 051 chiller for blow molder

high pressure air compressor kaeser csdx 137 with high pressure dryer, micro filter and buffer tank
pneumatic conveyor kosme “lt”
pet bottle filler kosme isoblock nh 24/24/6. neck handling, isobaric filling, all parts aisi 304. 24 rinsing stations with spray and dip system, 24 filling nozzles and arol capper with 6 capping heads.
bottle conveyors type kosme “ft”
air dryer kosme “air 2000” with two blowers
labeler kosmr extra hot melt 8 t si 1. wraparound hot clue labeler for precut paper and plastic labels
shrink wrapping machine kosme with shrink tunnel. packaging formats 3x2 bottles for 1.5 and 2 liters and 3x4 for 0.5 liter bottles
mixer euromix 10 with carbonizer. designed to produce carbonated soft drinks by mixing water and syrup and adding co2. capacity 10 000 liters/hour, syrup-water mixing ration from 3:1 to 7:1, max co2 8 gr/liter
water ionizing unit kosme “ozomix 700” capacity 7000 l/h, max product temp 30c
automatic cip line kosme eurosan with 1 x 2 m3 insulated and 1 x 2 m3 not insulated tank.
liquid co2 tank buse
semiautomatic pallet stretch wrapping machine FILLING LINE KRONES / KOSME PET 4500 BPH FOR CSD THE LINE WAS BUILT BY KOSME (NOWADAYS A PART OF KRONES) IN 2007. IT HAS BEEN IN WATER FILLING OPERATION ONLY LESS THAN 900 TOTAL OPERATING HOURS AND IS STILL INSTALLED, POWERED AND CAN BE TESTED. LINE IS ALSO SUITABLE FOR CARBONATED AND NON-CARBONATED SOFT DRINKS AND WATERS. THREE SETS OF MOLDS WILL BE A PART OF THIS DELIVERY. THIS LINE CONTAINS ALSO MIXER – CARBONATOR WHICH ALLOWS TO PRODUCE CARBONATED SOFT DRINKS. CONDITION IS VERY GOOD. MAIN CHARACTERISTICS OF THIS LINE MANUFACTURER KOSME / KRONES MANUFACTURING YEAR 2007 TOTAL OPERATING HOURS 873 HOURS ONLY PRODUCTS WATERS, CSD CAPACITY 4500 BPH IN 1.5 LITER PET NECK FINISH PLASTIC SCEW PCO 28 MM MOLDS 2 L 47.5 GR, 1.5 L 39.5 GR AND 0.5 L 20.5 GR MAX CO2 CONTENT 8 GR / LITER MAX CONCENTRATE MIX 1:7 ELECTRIC SUPPY 400V +/- 5% 50 HZ +/- 0,5% 3PH+N+PE LIST OF MAIN EQUIPMENT, ALL MADE IN YEAR 2007 BLOW MOLDING MACHINE KOSME KSB 3000 S1 LINEAR BLOW MOLDING MACHINE WITH CAPACITY OF 4500 BPH IN 1.5 LITERS EQUIPPED WITH KOSMATIC FAULTY PET BOTTLE DISCHARGE SYSTEM INCLUDES PREFORM FEEDING SYSTEM AND MTA TAE 051 CHILLER FOR BLOW MOLDER HIGH PRESSURE AIR COMPRESSOR KAESER CSDX 137 WITH HIGH PRESSURE DRYER, MICRO FILTER AND BUFFER TANK PNEUMATIC CONVEYOR KOSME “LT” PET BOTTLE FILLER KOSME ISOBLOCK NH 24/24/6. NECK HANDLING, ISOBARIC FILLING, ALL PARTS AISI 304. 24 RINSING STATIONS WITH SPRAY AND DIP SYSTEM, 24 FILLING NOZZLES AND AROL CAPPER WITH 6 CAPPING HEADS. BOTTLE CONVEYORS TYPE KOSME “FT” AIR DRYER KOSME “AIR 2000” WITH TWO BLOWERS LABELER KOSMR EXTRA HOT MELT 8 T SI 1. WRAPAROUND HOT CLUE LABELER FOR PRECUT PAPER AND PLASTIC LABELS SHRINK WRAPPING MACHINE KOSME WITH SHRINK TUNNEL. PACKAGING FORMATS 3X2 BOTTLES FOR 1.5 AND 2 LITERS AND 3X4 FOR 0.5 LITER BOTTLES MIXER EUROMIX 10 WITH CARBONIZER. DESIGNED TO PRODUCE CARBONATED SOFT DRINKS BY MIXING WATER AND SYRUP AND ADDING CO2. CAPACITY 10 000 LITERS/HOUR, SYRUP-WATER MIXING RATION FROM 3:1 TO 7:1, MAX CO2 8 GR/LITER WATER IONIZING UNIT KOSME “OZOMIX 700” CAPACITY 7000 L/H, MAX PRODUCT TEMP 30C AUTOMATIC CIP LINE KOSME EUROSAN WITH 1 X 2 M3 INSULATED AND 1 X 2 M3 NOT INSULATED TANK. LIQUID CO2 TANK BUSE SEMIAUTOMATIC PALLET STRETCH WRAPPING MACHINE
Vendedor: Domarom Star Srl
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-standardised pump. low-pressure centrifugal pump STANDARDISED PUMP. LOW-PRESSURE CENTRIFUGAL PUMP
Vendedor: Auktionshaus Auktionspunkt . de
Año de construcción: usado
Precio: 750 €
Ubicación: Land-new ksb pump etaline gn 40-250 / 114 gn11
manufacturer: ksb
type: etaline gn 40-250 / 114 gn11

state:
the pump was bought from a spare parts store and is completely new!

technical specifications:
- ksb inline pump etaline 40-250 / 114, gn11,
- with ksb standard motor, 1.1 kw, 400v
- single-stage block pump, ip 55,
- head 13m, 18m³ / h, 1450 rpm,
- housing, impeller gray cast iron
- dn 40mm, pn 16, 
- weight 52kg
- length 440mm, width 330mm, height 550mm

current selling price € 1.590 excl. vat  NEW KSB PUMP ETALINE GN 40-250 / 114 GN11 MANUFACTURER: KSB TYPE: ETALINE GN 40-250 / 114 GN11 STATE: THE PUMP WAS BOUGHT FROM A SPARE PARTS STORE AND IS COMPLETELY NEW! TECHNICAL SPECIFICATIONS: - KSB INLINE PUMP ETALINE 40-250 / 114, GN11, - WITH KSB STANDARD MOTOR, 1.1 KW, 400V - SINGLE-STAGE BLOCK PUMP, IP 55, - HEAD 13M, 18M³ / H, 1450 RPM, - HOUSING, IMPELLER GRAY CAST IRON - DN 40MM, PN 16, - WEIGHT 52KG - LENGTH 440MM, WIDTH 330MM, HEIGHT 550MM CURRENT SELLING PRICE € 1.590 EXCL. VAT
Vendedor: IPV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 950 €
Ubicación: Land-standardised pump. low-pressure centrifugal pump STANDARDISED PUMP. LOW-PRESSURE CENTRIFUGAL PUMP
Vendedor: Auktionshaus Auktionspunkt . de
Año de construcción: usado
Precio: 449 €
Ubicación: Land-
2 piece ksb pumps
type krsf bloc 50-200

year of manufacture 1995 2.2 kw
1450 rpm 0.83 l/s or 50 l/min
pumping height 9 m

length 0.70 wide 0.30 height 0.40 m
flange inlet dn 65 dn 50 side
weight approx. 60 kg

very good condition

â?¬449 each

preferred site 76829 landau, pick up, delivery possible
 2 PIECE KSB PUMPS TYPE KRSF BLOC 50-200 YEAR OF MANUFACTURE 1995 2.2 KW 1450 RPM 0.83 L/S OR 50 L/MIN PUMPING HEIGHT 9 M LENGTH 0.70 WIDE 0.30 HEIGHT 0.40 M FLANGE INLET DN 65 DN 50 SIDE WEIGHT APPROX. 60 KG VERY GOOD CONDITION Â?¬449 EACH PREFERRED SITE 76829 LANDAU, PICK UP, DELIVERY POSSIBLE
Vendedor: Metall Technik Schuhmann
Año de construcción: usado
Precio: used machinery auction RESALE 950 €
Ubicación: Land-standardised pump. low-pressure centrifugal pump STANDARDISED PUMP. LOW-PRESSURE CENTRIFUGAL PUMP
Vendedor: Auktionshaus Auktionspunkt . de
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-ksb 60 mâ³/h, 131 m high, 37 kw, mtc-c65-3a high pressure pump / highpresure-pump, pump  KSB 60 M³/H, 131 M HIGH, 37 KW, MTC-C65-3A HIGH PRESSURE PUMP / HIGHPRESURE-PUMP, PUMP
Vendedor: 4LBiz Handelsgesellschaft UG
Año de construcción: usado
Precio: 350 €
Ubicación: Land-centrifugal pump, water pump, submersible pump<br /><br />- delivery capacity 3,000 liters / h<br />conveying height max 29 h m<br />-motor power 2.2 kw<br />speed 2870 rpm<br />pipe connection inlet dn 52<br />pipe connection output dn 40<br />dimensions 860/300 / h300 mm<br />-weight 44 kg CENTRIFUGAL PUMP, WATER PUMP, SUBMERSIBLE PUMP

- DELIVERY CAPACITY 3,000 LITERS / H
CONVEYING HEIGHT MAX 29 H M
-MOTOR POWER 2.2 KW
SPEED 2870 RPM
PIPE CONNECTION INLET DN 52
PIPE CONNECTION OUTPUT DN 40
DIMENSIONS 860/300 / H300 MM
-WEIGHT 44 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-ksb 85 mâ³/h, 191 m high, 75 kw, wfk 80/06-55.03-6.2 high pressure pump, highpresure pump, pump & engine, german machine year 2014 KSB 85 M&ACIRC;&SUP3;/H, 191 M HIGH, 75 KW, WFK 80/06-55.03-6.2 HIGH PRESSURE PUMP, HIGHPRESURE PUMP, PUMP & ENGINE, GERMAN MACHINE YEAR 2014
Vendedor: 4LBiz Handelsgesellschaft UG
Año de construcción: usado
Precio: 25 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 550 €
Ubicación: Land-gr. bohrlstg. in st.: 30 mm
stroke: 125 mm
rpm: 125-1850 rpm
spindle retainer: mk 4
throat depth: 260 mm
total power: 2,2 kw / 400 v
machine weight: 150 kg

equipment / accessories:

processed baseplate - allows the clamping of high directly on the base plate

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine in advance under power.
 GR. BOHRLSTG. IN ST.: 30 MM STROKE: 125 MM RPM: 125-1850 RPM SPINDLE RETAINER: MK 4 THROAT DEPTH: 260 MM TOTAL POWER: 2,2 KW / 400 V MACHINE WEIGHT: 150 KG EQUIPMENT / ACCESSORIES: PROCESSED BASEPLATE - ALLOWS THE CLAMPING OF HIGH DIRECTLY ON THE BASE PLATE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE IN ADVANCE UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-centrifugal pump ksb in in very good condition.
electrical motor aeg 18,5kw 400v 1450rpm
q=140-300 m3/h
h=24-18,5 m
for any questions please feel free to contact me:
d.nadnic@gmail.com
info@servisomega 
i send more pictures to e-mail.    CENTRIFUGAL PUMP KSB IN IN VERY GOOD CONDITION. ELECTRICAL MOTOR AEG 18,5KW 400V 1450RPM Q=140-300 M3/H H=24-18,5 M FOR ANY QUESTIONS PLEASE FEEL FREE TO CONTACT ME: D.NADNIC@GMAIL.COM INFO@SERVISOMEGA I SEND MORE PICTURES TO E-MAIL.
Vendedor: Servis omega d.o.o.
Año de construcción: usado
Precio: 80 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-centrifugal pump ksb in in very good condition.
electrical motor aeg 11kw 400v 1450rpm
q=180-270 m3/h
h=14.8-12.2 m
for any questions please feel free to contact me:
d.nadnic@gmail.com
info@servisomega    CENTRIFUGAL PUMP KSB IN IN VERY GOOD CONDITION. ELECTRICAL MOTOR AEG 11KW 400V 1450RPM Q=180-270 M3/H H=14.8-12.2 M FOR ANY QUESTIONS PLEASE FEEL FREE TO CONTACT ME: D.NADNIC@GMAIL.COM INFO@SERVISOMEGA
Vendedor: Servis omega d.o.o.
Año de construcción: usado
Precio: 60 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-for sale a used ksb etachtom water pump. please contact me for more information. thank you. FOR SALE A USED KSB ETACHTOM WATER PUMP. PLEASE CONTACT ME FOR MORE INFORMATION. THANK YOU.
Vendedor: Intermotor LTD
Año de construcción: usado
Precio: 60 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)