288 ofertas

Año de construcción: usado
Ubicación: Land-there is one polishing machine shl with an industrial robot kuka kr 16 available: (1) polishing machine shl: connected load: 16kva (2) industrial robot kuka kr 16: weight: 235kg, with sound proof cabin: 3000x3000x5000mm.  THERE IS ONE POLISHING MACHINE SHL WITH AN INDUSTRIAL ROBOT KUKA KR 16 AVAILABLE: (1) POLISHING MACHINE SHL: CONNECTED LOAD: 16KVA (2) INDUSTRIAL ROBOT KUKA KR 16: WEIGHT: 235KG, WITH SOUND PROOF CABIN: 3000X3000X5000MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-current capacity:250 kva<br/>workpiece dia.:- mm<br/>cross cut max.:- mm²<br/>max. friction force:81 kn bei 100 bar <br/>min. friction force:5,7 kn bei 7 bar <br/>max. upsetting force:120 kn bei 148 bar <br/>max. spindle speed:2.500 min-1<br/>max. slide stroke:400 mm<br/>spindle drive power:147 kw<br/>(frequency controlled three phase motor):- <br/>electrical supply data:- <br/>nominal voltage:400 / 50  v/hz<br/>total connected load:250 kva<br/>medium power requirement:50 kw<br/>medium power:250 a<br/>fuse:630 a träge <br/>cable cross section:240 mm2<br/>total power requirement: kw<br/>weight of the machine ca.: t<br/>dimensions of the machine ca.: m<br/><br/>electrical control: - siemens s7 - cpu 317-pn/dp (with profibus and ethernet) - control programmed in step 7 with graph 7 step chains - hydraulic system: make rexroth - main pump: make parker - spindle drive: make lenze incl. inverter (147 kw)  -  camless slide control   - kuka parameter monotoring  system  - clamping tools rotary fixed  - equipment, accessories:  - kuka friction welding machine rs 12 - short version - machine control with electrical cabinet - control unit panel pc 677b with step chain diagnosis - parameter monitoring device pcd 314 - remote diagnosis - camless slide control - clamping tools rotary - fixed - safety device - automatically operated control door - heating for the hydraulic system - fluid grease lubrication - scanner integrated in rs 12 - special drive 147 kw - ce declaration of conformity  the cooling of the main motor as well as the switch cabinet was carried out by decentralized service water cooling and must be ensured by a new cold water chiller if necessary.         -camless slide controlcamless slide control CURRENT CAPACITY:250 KVA
WORKPIECE DIA.:- MM
CROSS CUT MAX.:- MM²
MAX. FRICTION FORCE:81 KN BEI 100 BAR
MIN. FRICTION FORCE:5,7 KN BEI 7 BAR
MAX. UPSETTING FORCE:120 KN BEI 148 BAR
MAX. SPINDLE SPEED:2.500 MIN-1
MAX. SLIDE STROKE:400 MM
SPINDLE DRIVE POWER:147 KW
(FREQUENCY CONTROLLED THREE PHASE MOTOR):-
ELECTRICAL SUPPLY DATA:-
NOMINAL VOLTAGE:400 / 50 V/HZ
TOTAL CONNECTED LOAD:250 KVA
MEDIUM POWER REQUIREMENT:50 KW
MEDIUM POWER:250 A
FUSE:630 A TRäGE
CABLE CROSS SECTION:240 MM2
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M

ELECTRICAL CONTROL: - SIEMENS S7 - CPU 317-PN/DP (WITH PROFIBUS AND ETHERNET) - CONTROL PROGRAMMED IN STEP 7 WITH GRAPH 7 STEP CHAINS - HYDRAULIC SYSTEM: MAKE REXROTH - MAIN PUMP: MAKE PARKER - SPINDLE DRIVE: MAKE LENZE INCL. INVERTER (147 KW) - CAMLESS SLIDE CONTROL - KUKA PARAMETER MONOTORING SYSTEM - CLAMPING TOOLS ROTARY FIXED - EQUIPMENT, ACCESSORIES: - KUKA FRICTION WELDING MACHINE RS 12 - SHORT VERSION - MACHINE CONTROL WITH ELECTRICAL CABINET - CONTROL UNIT PANEL PC 677B WITH STEP CHAIN DIAGNOSIS - PARAMETER MONITORING DEVICE PCD 314 - REMOTE DIAGNOSIS - CAMLESS SLIDE CONTROL - CLAMPING TOOLS ROTARY - FIXED - SAFETY DEVICE - AUTOMATICALLY OPERATED CONTROL DOOR - HEATING FOR THE HYDRAULIC SYSTEM - FLUID GREASE LUBRICATION - SCANNER INTEGRATED IN RS 12 - SPECIAL DRIVE 147 KW - CE DECLARATION OF CONFORMITY THE COOLING OF THE MAIN MOTOR AS WELL AS THE SWITCH CABINET WAS CARRIED OUT BY DECENTRALIZED SERVICE WATER COOLING AND MUST BE ENSURED BY A NEW COLD WATER CHILLER IF NECESSARY. -CAMLESS SLIDE CONTROLCAMLESS SLIDE CONTROL
Vendedor: FLECKENSTEIN Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-axis: 6

control: krc2 ed 05

type: kr6

payload: 6 kg

hours of operation: approx. 31.139 h

distance: 1611 mm

year of construction: 2010

condition: used-ready condition

accessories: control, set of cables, manual control unit
  AXIS: 6 CONTROL: KRC2 ED 05 TYPE: KR6 PAYLOAD: 6 KG HOURS OF OPERATION: APPROX. 31.139 H DISTANCE: 1611 MM YEAR OF CONSTRUCTION: 2010 CONDITION: USED-READY CONDITION ACCESSORIES: CONTROL, SET OF CABLES, MANUAL CONTROL UNIT
Vendedor: FAMAG-Werkzeugfabrik GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 60.000 €
Ubicación: Land-weight approx.: 37000 kg<br/>dimensions (l x w x h) approx.: 50000 x 7500 x 2600 mm<br/>description: used for the production of scaffolding / mezzanine tables measuring 500 mm type aes , variable length, with patented system of clinching<br> usable working width profiling about 1000 mm<br> line composed of:<br> - unwinding reel with loading cot brand grandini model psp 10 year 2001, useful arm length about 1050 mm, equipped with upper premirotolo<br> - piemme brand feeder, year 2006, useful working width about 1100 mm equipped with in-line welding system for sheet metal tapes<br> - inlet profiling press machine<br> - profiling machine 20 + 15 steps, total 35 steps - cutting shears about 11 kw - island of clinching and assembly of aes brand with stacking robot brand kuka model kr 125/3 year 2002 control vkr c2<br> - <b> electrical system to be re-wired <,/ b>,</b> WEIGHT APPROX.: 37000 KG
DIMENSIONS (L X W X H) APPROX.: 50000 X 7500 X 2600 MM
DESCRIPTION: USED FOR THE PRODUCTION OF SCAFFOLDING / MEZZANINE TABLES MEASURING 500 MM TYPE AES , VARIABLE LENGTH, WITH PATENTED SYSTEM OF CLINCHING
USABLE WORKING WIDTH PROFILING ABOUT 1000 MM
LINE COMPOSED OF:
- UNWINDING REEL WITH LOADING COT BRAND GRANDINI MODEL PSP 10 YEAR 2001, USEFUL ARM LENGTH ABOUT 1050 MM, EQUIPPED WITH UPPER PREMIROTOLO
- PIEMME BRAND FEEDER, YEAR 2006, USEFUL WORKING WIDTH ABOUT 1100 MM EQUIPPED WITH IN-LINE WELDING SYSTEM FOR SHEET METAL TAPES
- INLET PROFILING PRESS MACHINE
- PROFILING MACHINE 20 + 15 STEPS, TOTAL 35 STEPS - CUTTING SHEARS ABOUT 11 KW - ISLAND OF CLINCHING AND ASSEMBLY OF AES BRAND WITH STACKING ROBOT BRAND KUKA MODEL KR 125/3 YEAR 2002 CONTROL VKR C2
- ELECTRICAL SYSTEM TO BE RE-WIRED <,/ B>,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-robots industrial robots
manufacturer: kuka
type: kr210 r3100 ultra year: 2015
(mint, for testing purposes, special painting in blue only)

ez13 055 ctr mb1 air air
ez36 ctr mb1 air air
range: 3,096 mm
weight: 1,145 kg
weight: 210kg
base mounting
area boundary a1 20 â° steps
control: kr c4 sc4. 1 x 11 x 51 x 66 pb io
software: krc4 docs & parts standard
software kss 8.3, 2, usertech v3, worksvisual
security interface x 11
interface implementation x 51
interface ethernet x 66
csp standard 2 x usb3. 0 / rj45 - ksi
extension digital i/o 16/16
profibus dp master/slave - ethercat
kuka smartpad 1.0
smartpad kuka extension cable 10 m
kuka connecting cable 7 m
 ROBOTS INDUSTRIAL ROBOTS MANUFACTURER: KUKA TYPE: KR210 R3100 ULTRA YEAR: 2015 (MINT, FOR TESTING PURPOSES, SPECIAL PAINTING IN BLUE ONLY) EZ13 055 CTR MB1 AIR AIR EZ36 CTR MB1 AIR AIR RANGE: 3,096 MM WEIGHT: 1,145 KG WEIGHT: 210KG BASE MOUNTING AREA BOUNDARY A1 20 &ACIRC;&DEG; STEPS CONTROL: KR C4 SC4. 1 X 11 X 51 X 66 PB IO SOFTWARE: KRC4 DOCS & PARTS STANDARD SOFTWARE KSS 8.3, 2, USERTECH V3, WORKSVISUAL SECURITY INTERFACE X 11 INTERFACE IMPLEMENTATION X 51 INTERFACE ETHERNET X 66 CSP STANDARD 2 X USB3. 0 / RJ45 - KSI EXTENSION DIGITAL I/O 16/16 PROFIBUS DP MASTER/SLAVE - ETHERCAT KUKA SMARTPAD 1.0 SMARTPAD KUKA EXTENSION CABLE 10 M KUKA CONNECTING CABLE 7 M
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 3.200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-kuka six-axis - robot
weight: 665 kg KUKA SIX-AXIS - ROBOT WEIGHT: 665 KG
Vendedor: Herr Peter Dango
Año de construcción: usado
Ubicación: Land-weight approx.: 10000 kg<br/>dimensions (l x w x h) approx.: 7000x1200x2800 mm<br/>description: <h3>used demmeler tool arena with linear axis 2.2</h3> <br> changing positions 2 x 5 (sk 50 din 69871)<br> tool places 192<br> including 6 axes kuka kr 140 l 120-2 on a 6500 mm long linear unit<br> WEIGHT APPROX.: 10000 KG
DIMENSIONS (L X W X H) APPROX.: 7000X1200X2800 MM
DESCRIPTION:

USED DEMMELER TOOL ARENA WITH LINEAR AXIS 2.2


CHANGING POSITIONS 2 X 5 (SK 50 DIN 69871)
TOOL PLACES 192
INCLUDING 6 AXES KUKA KR 140 L 120-2 ON A 6500 MM LONG LINEAR UNIT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-krc4 basic cabinet eu ral 7016
cl0bvs8
krc4 cabinet feet
label set de / en kr c4 security interface x 11
interfavedurchfã¼hrung x 51
interface ethernet x 66 kr c4 docs & parts standard kss 8.2 kuka. workvisual 2.4
very few hours and no signs of wear because it served as show robot.
available from february 2019! KRC4 BASIC CABINET EU RAL 7016 CL0BVS8 KRC4 CABINET FEET LABEL SET DE / EN KR C4 SECURITY INTERFACE X 11 INTERFAVEDURCHF&ATILDE;&FRAC14;HRUNG X 51 INTERFACE ETHERNET X 66 KR C4 DOCS & PARTS STANDARD KSS 8.2 KUKA. WORKVISUAL 2.4 VERY FEW HOURS AND NO SIGNS OF WEAR BECAUSE IT SERVED AS SHOW ROBOT. AVAILABLE FROM FEBRUARY 2019!
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 180000 kg<br/>x-travel: 12000 ( 2 x 5700 ) mm<br/>y-travel: 4140 mm<br/>z-travel: 3300 mm<br/>control: siemens 840 d  <br/>distance between columns: 4000 mm<br/>dimensions (l x w x h) approx.: 26200x12750x7700 mm<br/>turning speed range: 20-4000 ( 75 kw ) rpm<br/>distance between spindle/table: 3300 mm<br/>table surface area l x w : ( 2 x ) 2500 x 5000  mm<br/>feed range: 30000 mm/min<br/>tool taper: sk 50 <br/>description: <h3>used droop + rein with 6 controlled axes - portal machining center for heavy machining</h3> <br> <b>droop + rein</b> belongs today to <b>starrag group</b><br> <br> machine with serial number 800244 has approx. 68500 operating hours.<br> working hours of the main spindle approx. 15600 hours.<br> <br> controlled with <b>sinumerik 840d</b> control by <b>siemens</b><br> <br> ram unit r 75 with 75 kw and 5500 nm<br> <br> double table version - 2 tables with 5,000 x 2,500 mm each<br> tables can be used individually or coupled.<br> table load coupled 100 tons each per 50 tons<br> <br> <b>demmeler</b> tool changing system with 167 magazine places<br> inclusive <b>kuka</b> loading robot type krc2 und programming terminal<br> insertion table, 2 x 3 stations<br> <br> compact coolant system with ikz<br> chip conveyor<br> protective fence, cabin, video surveillance<br> <br> <b>the head magazine contains 8 milling heads:</b><br> <br> 1 universal milling head c- / b-axis full cnc<br> 4 angle milling heads (see pdf / pictures)<br> 3 header milling heads<br> the head change is automated.<br> <br> machine is equipped with additional accessories among other tool holders and clamping devices.<br> <br> please look to the information in pdf format, a video is also available!<br> <br> machine can be inspected under power!<br> <br> <b>disassembly including professional loading can be organized by surplex,<br> we work in cooperation with manufacturer.</b> WEIGHT APPROX.: 180000 KG
X-TRAVEL: 12000 ( 2 X 5700 ) MM
Y-TRAVEL: 4140 MM
Z-TRAVEL: 3300 MM
CONTROL: SIEMENS 840 D
DISTANCE BETWEEN COLUMNS: 4000 MM
DIMENSIONS (L X W X H) APPROX.: 26200X12750X7700 MM
TURNING SPEED RANGE: 20-4000 ( 75 KW ) RPM
DISTANCE BETWEEN SPINDLE/TABLE: 3300 MM
TABLE SURFACE AREA L X W : ( 2 X ) 2500 X 5000 MM
FEED RANGE: 30000 MM/MIN
TOOL TAPER: SK 50
DESCRIPTION:

USED DROOP + REIN WITH 6 CONTROLLED AXES - PORTAL MACHINING CENTER FOR HEAVY MACHINING


DROOP + REIN BELONGS TODAY TO STARRAG GROUP

MACHINE WITH SERIAL NUMBER 800244 HAS APPROX. 68500 OPERATING HOURS.
WORKING HOURS OF THE MAIN SPINDLE APPROX. 15600 HOURS.

CONTROLLED WITH SINUMERIK 840D CONTROL BY SIEMENS

RAM UNIT R 75 WITH 75 KW AND 5500 NM

DOUBLE TABLE VERSION - 2 TABLES WITH 5,000 X 2,500 MM EACH
TABLES CAN BE USED INDIVIDUALLY OR COUPLED.
TABLE LOAD COUPLED 100 TONS EACH PER 50 TONS

DEMMELER TOOL CHANGING SYSTEM WITH 167 MAGAZINE PLACES
INCLUSIVE KUKA LOADING ROBOT TYPE KRC2 UND PROGRAMMING TERMINAL
INSERTION TABLE, 2 X 3 STATIONS

COMPACT COOLANT SYSTEM WITH IKZ
CHIP CONVEYOR
PROTECTIVE FENCE, CABIN, VIDEO SURVEILLANCE

THE HEAD MAGAZINE CONTAINS 8 MILLING HEADS:

1 UNIVERSAL MILLING HEAD C- / B-AXIS FULL CNC
4 ANGLE MILLING HEADS (SEE PDF / PICTURES)
3 HEADER MILLING HEADS
THE HEAD CHANGE IS AUTOMATED.

MACHINE IS EQUIPPED WITH ADDITIONAL ACCESSORIES AMONG OTHER TOOL HOLDERS AND CLAMPING DEVICES.

PLEASE LOOK TO THE INFORMATION IN PDF FORMAT, A VIDEO IS ALSO AVAILABLE!

MACHINE CAN BE INSPECTED UNDER POWER!

DISASSEMBLY INCLUDING PROFESSIONAL LOADING CAN BE ORGANIZED BY SURPLEX,
WE WORK IN COOPERATION WITH MANUFACTURER.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-the pester machine is a two-station palletizer fitted with kuka (kr16) robot technology. the cartons are palletized by the pewo pal 6 form on pallets according to a product-specific palletizing scheme. THE PESTER MACHINE IS A TWO-STATION PALLETIZER FITTED WITH KUKA (KR16) ROBOT TECHNOLOGY. THE CARTONS ARE PALLETIZED BY THE PEWO PAL 6 FORM ON PALLETS ACCORDING TO A PRODUCT-SPECIFIC PALLETIZING SCHEME.
Vendedor: UNIGROUP AG
Año de construcción: usado
Ubicación: Land-numbers of torche: 1 <br/>type of gas: plasma <br/>workpiece length:  mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>beam coping robot in very good condition !<br/><br/>equipped with plasma cutting unit.<br/><br/>kuka robot control with 7 axes cnc control (6 robot axes and 1 portal axis)<br/><br/>the infeed roller-type conveyor with cross transport is 12 m long and the<br/>outfeed side with cross transport is 8 m long. transport system t 13<br/><br/>fast material cross transport<br/>material stock in heavy-duty steel construction<br/>sliding rails of synthetic material (polyamide) for low-noise material cross <br/>transport<br/>drag chains with transport claws<br/>drive system with continuously-variable frequency-controlled gear motor<br/><br/>measuring system for coping robot on the feed side, m 158 g sliding measuring  <br/>carriage with gripper<br/><br/>material size: width x height 1200 x 450 mm<br/>bevel angle max. ca. 45 deg.<br/><br/><br/><br/><br/><br/> NUMBERS OF TORCHE: 1
TYPE OF GAS: PLASMA
WORKPIECE LENGTH: MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
BEAM COPING ROBOT IN VERY GOOD CONDITION !

EQUIPPED WITH PLASMA CUTTING UNIT.

KUKA ROBOT CONTROL WITH 7 AXES CNC CONTROL (6 ROBOT AXES AND 1 PORTAL AXIS)

THE INFEED ROLLER-TYPE CONVEYOR WITH CROSS TRANSPORT IS 12 M LONG AND THE
OUTFEED SIDE WITH CROSS TRANSPORT IS 8 M LONG. TRANSPORT SYSTEM T 13

FAST MATERIAL CROSS TRANSPORT
MATERIAL STOCK IN HEAVY-DUTY STEEL CONSTRUCTION
SLIDING RAILS OF SYNTHETIC MATERIAL (POLYAMIDE) FOR LOW-NOISE MATERIAL CROSS
TRANSPORT
DRAG CHAINS WITH TRANSPORT CLAWS
DRIVE SYSTEM WITH CONTINUOUSLY-VARIABLE FREQUENCY-CONTROLLED GEAR MOTOR

MEASURING SYSTEM FOR COPING ROBOT ON THE FEED SIDE, M 158 G SLIDING MEASURING
CARRIAGE WITH GRIPPER

MATERIAL SIZE: WIDTH X HEIGHT 1200 X 450 MM
BEVEL ANGLE MAX. CA. 45 DEG.





Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-depalletizer khs innopal as-1-h with pallet magazine, year 2006
 
accurate and flexible high performance depalletizer innopal as-1-h with merkant 1 ahs-pl pallet magazine made by khs (germany) in year 2006, capacity 60 000 bph or 420 layers/hour. the innopal as-1-h is a bulk depalletizer is suitable for processing containers made of glass, plastic, or metal. fast product changeover is achieved thanks to a motor-driven adjustable push-off carriage. this equipment includes complete palletizing system with pallet infeed and outfeed conveyors, pallet magazine, bottle outfeed conveyor, layer removal robot with layer magazine, metal structure for whole system and control system. innopal as 1h is ideal machine for returnable or unstable containers. control panel is kuka and control system is siemens simatic s7. equipment is in good condition and ready for immediate delivery.
 
 
technical specifications:
manufacturer	khs
machine type	innopal as-1-h
manufacturer year	2006
capacity	60 000 bph or 420 layer/hour
used bottle size	0.5-liter glass bottles
control plc	siemens et 200m with kuka 
max block height including pallet	3000 mm.
pallet dimensions 	800 x 1450 mm and 1000 x 1250 mm.
machine dimensions	3610 x 3085 x 5725 mm.
machine weight	7500 kg.

 DEPALLETIZER KHS INNOPAL AS-1-H WITH PALLET MAGAZINE, YEAR 2006 ACCURATE AND FLEXIBLE HIGH PERFORMANCE DEPALLETIZER INNOPAL AS-1-H WITH MERKANT 1 AHS-PL PALLET MAGAZINE MADE BY KHS (GERMANY) IN YEAR 2006, CAPACITY 60 000 BPH OR 420 LAYERS/HOUR. THE INNOPAL AS-1-H IS A BULK DEPALLETIZER IS SUITABLE FOR PROCESSING CONTAINERS MADE OF GLASS, PLASTIC, OR METAL. FAST PRODUCT CHANGEOVER IS ACHIEVED THANKS TO A MOTOR-DRIVEN ADJUSTABLE PUSH-OFF CARRIAGE. THIS EQUIPMENT INCLUDES COMPLETE PALLETIZING SYSTEM WITH PALLET INFEED AND OUTFEED CONVEYORS, PALLET MAGAZINE, BOTTLE OUTFEED CONVEYOR, LAYER REMOVAL ROBOT WITH LAYER MAGAZINE, METAL STRUCTURE FOR WHOLE SYSTEM AND CONTROL SYSTEM. INNOPAL AS 1H IS IDEAL MACHINE FOR RETURNABLE OR UNSTABLE CONTAINERS. CONTROL PANEL IS KUKA AND CONTROL SYSTEM IS SIEMENS SIMATIC S7. EQUIPMENT IS IN GOOD CONDITION AND READY FOR IMMEDIATE DELIVERY. TECHNICAL SPECIFICATIONS: MANUFACTURER KHS MACHINE TYPE INNOPAL AS-1-H MANUFACTURER YEAR 2006 CAPACITY 60 000 BPH OR 420 LAYER/HOUR USED BOTTLE SIZE 0.5-LITER GLASS BOTTLES CONTROL PLC SIEMENS ET 200M WITH KUKA MAX BLOCK HEIGHT INCLUDING PALLET 3000 MM. PALLET DIMENSIONS 800 X 1450 MM AND 1000 X 1250 MM. MACHINE DIMENSIONS 3610 X 3085 X 5725 MM. MACHINE WEIGHT 7500 KG.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-pressure:    200 t<br/>distance between columns:  mm<br/>stroke:    250 mm<br/>--------------------------------------------------:  <br/>press design:  <br/>- drive system: eccentric / crank:        <br/>- frame design: h-frame, monoblock:        <br/>- openings in uprights: yes:        <br/>- number of suspensions:      1  <br/>- table cushion: yes:        <br/>press forces:  <br/>- total force (nominal):    200 to<br/>press table:  <br/>- table surface (left-right):   1000 mm<br/>- table surface (front-back):   1000 mm<br/>- height above floor level:    800 mm<br/>slide:  <br/>- table surface (left-right):   1120 mm<br/>- table surface (front-back):   1000 mm<br/>- stroke:    250 mm<br/>- stroke rate (max.):     35 /min<br/>slide (mechan. press):  <br/>- slide adjustment:    150 mm<br/>die cushion (table cushion):  <br/>- number of cushions:      1  <br/>- cushion force:     29 to<br/>- stroke:    125 mm<br/>- cushion plate surface (left-right):    650 mm<br/>- cushion plate surface (front-back):    650 mm<br/>ejector (table ejector):  <br/>- number of ejectors:      1  <br/>- stroke:    125 mm<br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:    625 mm<br/>- passline opening (free passage in side columns):    600 mm<br/>- free passage between side columns (height):    650 mm<br/>electrical specifications:  <br/>- total power consumption:     55 kw<br/>- mains voltage:    380 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   2500 mm<br/>- space requirements -front/back-:   1500 mm<br/>- total height:   6000 mm<br/>- total weight approx.:  15000 kg<br/>available:<br/>3 presses of the same characteristics<br/>3 kuka kr30 / 2 robots at ? 4500 per unit (not included in the offer)<br/><br/>video demo:<br/>https://youtu.be/dxxx9jpzqky<br/><br/><br/><br/><br/> PRESSURE: 200 T
DISTANCE BETWEEN COLUMNS: MM
STROKE: 250 MM
--------------------------------------------------:
PRESS DESIGN:
- DRIVE SYSTEM: ECCENTRIC / CRANK:
- FRAME DESIGN: H-FRAME, MONOBLOCK:
- OPENINGS IN UPRIGHTS: YES:
- NUMBER OF SUSPENSIONS: 1
- TABLE CUSHION: YES:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 200 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1000 MM
- TABLE SURFACE (FRONT-BACK): 1000 MM
- HEIGHT ABOVE FLOOR LEVEL: 800 MM
SLIDE:
- TABLE SURFACE (LEFT-RIGHT): 1120 MM
- TABLE SURFACE (FRONT-BACK): 1000 MM
- STROKE: 250 MM
- STROKE RATE (MAX.): 35 /MIN
SLIDE (MECHAN. PRESS):
- SLIDE ADJUSTMENT: 150 MM
DIE CUSHION (TABLE CUSHION):
- NUMBER OF CUSHIONS: 1
- CUSHION FORCE: 29 TO
- STROKE: 125 MM
- CUSHION PLATE SURFACE (LEFT-RIGHT): 650 MM
- CUSHION PLATE SURFACE (FRONT-BACK): 650 MM
EJECTOR (TABLE EJECTOR):
- NUMBER OF EJECTORS: 1
- STROKE: 125 MM
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 625 MM
- PASSLINE OPENING (FREE PASSAGE IN SIDE COLUMNS): 600 MM
- FREE PASSAGE BETWEEN SIDE COLUMNS (HEIGHT): 650 MM
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 55 KW
- MAINS VOLTAGE: 380 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 2500 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 1500 MM
- TOTAL HEIGHT: 6000 MM
- TOTAL WEIGHT APPROX.: 15000 KG
AVAILABLE:
3 PRESSES OF THE SAME CHARACTERISTICS
3 KUKA KR30 / 2 ROBOTS AT ? 4500 PER UNIT (NOT INCLUDED IN THE OFFER)

VIDEO DEMO:
HTTPS://YOUTU.BE/DXXX9JPZQKY




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line khs 40 000 bph with bwm
  
complete line made by khs in year 2000, capacity of 40 000 returnable glass bottles per hour, format of bottles 0.33, 0.5 & 0.65 used for beer. the line was stopped in 2014 and is still installed (only depalletizer and empty bottle conveyors we dismantled ) and the line can be dry tested for serious customers.
 
the list of main equipment:

1. depalletizer innopal as 1h, khs, 2004 with pallet magazine

    control system from kuka
    ser. ? k89400142-100
    machine dismantled and packed.

2. conveyor of empty bottles – missing
3. bwm innoclean ee 52/87 s22k, khs, 1999, double end

    control plc siemens s7
    washer cups made of stainless still
    four treatment sections
    ser. ? 1680

4. conveyor system for clean and empty bottles (with siemens s7 plc)
5. ebi filtec ft49 rld, year 1999

    control system from filtec
    inspection are figure, night, internal inclusions & color
    ser. ? 100144

6. ebi filtec omnivision, year 1999

    control system from filtec
    inspection is internal inclusions
    ser. ? 1200/3000

7. trap filtration system khs filtergehause 54x30, year 2005

    control cabinet with  siemens s7 plc
    two trap filters
    buffer tank volume13.8 m3. pressure 3 bar, year 1999 

8. filling block khs innofill em (svf) 120/18, year 1999

    control plc siemens s7
    over pressure filler with volumetric filling control
    three caps – crown, twistoff – first station & ring-pull – second ctation 
    co2 blowing
    ser. ? 47300

9. fbi heuft spectrum tx hbbvxti 60, 2006

    control – heuft
    inspection are cap & level

10. conveyor of full bottles (siemens s7)
11. pasteurizer innopas piisg 60-175, khs 2002

    control – siemens s7
    span of capacity – 80-100%
    four sections, stainless still
    ser. ? 0579

12. accumulator table  with siemens s7 plc
13. bottle dryer / blower aci , with siemens s7 plc
14. labeler khs innoket 2090/120-60 lm kt, year  2005 + with laser coder lasetec year 2007

    control plc siemens s7
    two stations (front, back, neck) for paper labels, cold glue
    three stations (front, back, neck) for film labels, self-adhesive labels
    60 bottle turtles, servos controlled
    ser. ?1164

15. label inspector khs metec promecon 2000, year 2006
16. labeler inspector khs metec promecon 4000, year 2006

    control system from promecon
    full inspection of bottles – labelers, cap, geometry

17. wrap around packer khs kisters 320/70, 2002 with cartons magazine

    control  plc siemens s7
    type ? 1 packing in 6x4 format in carton
    type ? 2 packing in carton crates 4 boxes on 6 bottles
    ser. ? 002393

18. open crate inspector filtec oc 300 , control plc siemens s7
19. carton box conveyors with flow divider, control plc siemens s7
20. box packing machine aries 906, year 2003 with carton magazine

    control plc siemens s7
    packing  bottles in 6bottle carton boxes

21. palletizer khs innopal lord 2bsn1, year1999 with pallet magazine

    control plc siemens s7
    pelletizing two pallet in parallel
    placing cardboard between layers   

22. pallet conveyors with siemens s7 plc
23. pallet wrapper robopac genesis, year 1997

    control plc siemens s7
    lifting table is missing  
    output conveyor
    ser. ? 467090298

24. pallet coder metec 
25. main electrical distribution cabinets GLASS BOTTLE FILLING LINE KHS 40 000 BPH WITH BWM COMPLETE LINE MADE BY KHS IN YEAR 2000, CAPACITY OF 40 000 RETURNABLE GLASS BOTTLES PER HOUR, FORMAT OF BOTTLES 0.33, 0.5 & 0.65 USED FOR BEER. THE LINE WAS STOPPED IN 2014 AND IS STILL INSTALLED (ONLY DEPALLETIZER AND EMPTY BOTTLE CONVEYORS WE DISMANTLED ) AND THE LINE CAN BE DRY TESTED FOR SERIOUS CUSTOMERS. THE LIST OF MAIN EQUIPMENT: 1. DEPALLETIZER INNOPAL AS 1H, KHS, 2004 WITH PALLET MAGAZINE CONTROL SYSTEM FROM KUKA SER. ? K89400142-100 MACHINE DISMANTLED AND PACKED. 2. CONVEYOR OF EMPTY BOTTLES – MISSING 3. BWM INNOCLEAN EE 52/87 S22K, KHS, 1999, DOUBLE END CONTROL PLC SIEMENS S7 WASHER CUPS MADE OF STAINLESS STILL FOUR TREATMENT SECTIONS SER. ? 1680 4. CONVEYOR SYSTEM FOR CLEAN AND EMPTY BOTTLES (WITH SIEMENS S7 PLC) 5. EBI FILTEC FT49 RLD, YEAR 1999 CONTROL SYSTEM FROM FILTEC INSPECTION ARE FIGURE, NIGHT, INTERNAL INCLUSIONS & COLOR SER. ? 100144 6. EBI FILTEC OMNIVISION, YEAR 1999 CONTROL SYSTEM FROM FILTEC INSPECTION IS INTERNAL INCLUSIONS SER. ? 1200/3000 7. TRAP FILTRATION SYSTEM KHS FILTERGEHAUSE 54X30, YEAR 2005 CONTROL CABINET WITH SIEMENS S7 PLC TWO TRAP FILTERS BUFFER TANK VOLUME13.8 M3. PRESSURE 3 BAR, YEAR 1999 8. FILLING BLOCK KHS INNOFILL EM (SVF) 120/18, YEAR 1999 CONTROL PLC SIEMENS S7 OVER PRESSURE FILLER WITH VOLUMETRIC FILLING CONTROL THREE CAPS – CROWN, TWISTOFF – FIRST STATION & RING-PULL – SECOND CTATION CO2 BLOWING SER. ? 47300 9. FBI HEUFT SPECTRUM TX HBBVXTI 60, 2006 CONTROL – HEUFT INSPECTION ARE CAP & LEVEL 10. CONVEYOR OF FULL BOTTLES (SIEMENS S7) 11. PASTEURIZER INNOPAS PIISG 60-175, KHS 2002 CONTROL – SIEMENS S7 SPAN OF CAPACITY – 80-100% FOUR SECTIONS, STAINLESS STILL SER. ? 0579 12. ACCUMULATOR TABLE WITH SIEMENS S7 PLC 13. BOTTLE DRYER / BLOWER ACI , WITH SIEMENS S7 PLC 14. LABELER KHS INNOKET 2090/120-60 LM KT, YEAR 2005 + WITH LASER CODER LASETEC YEAR 2007 CONTROL PLC SIEMENS S7 TWO STATIONS (FRONT, BACK, NECK) FOR PAPER LABELS, COLD GLUE THREE STATIONS (FRONT, BACK, NECK) FOR FILM LABELS, SELF-ADHESIVE LABELS 60 BOTTLE TURTLES, SERVOS CONTROLLED SER. ?1164 15. LABEL INSPECTOR KHS METEC PROMECON 2000, YEAR 2006 16. LABELER INSPECTOR KHS METEC PROMECON 4000, YEAR 2006 CONTROL SYSTEM FROM PROMECON FULL INSPECTION OF BOTTLES – LABELERS, CAP, GEOMETRY 17. WRAP AROUND PACKER KHS KISTERS 320/70, 2002 WITH CARTONS MAGAZINE CONTROL PLC SIEMENS S7 TYPE ? 1 PACKING IN 6X4 FORMAT IN CARTON TYPE ? 2 PACKING IN CARTON CRATES 4 BOXES ON 6 BOTTLES SER. ? 002393 18. OPEN CRATE INSPECTOR FILTEC OC 300 , CONTROL PLC SIEMENS S7 19. CARTON BOX CONVEYORS WITH FLOW DIVIDER, CONTROL PLC SIEMENS S7 20. BOX PACKING MACHINE ARIES 906, YEAR 2003 WITH CARTON MAGAZINE CONTROL PLC SIEMENS S7 PACKING BOTTLES IN 6BOTTLE CARTON BOXES 21. PALLETIZER KHS INNOPAL LORD 2BSN1, YEAR1999 WITH PALLET MAGAZINE CONTROL PLC SIEMENS S7 PELLETIZING TWO PALLET IN PARALLEL PLACING CARDBOARD BETWEEN LAYERS 22. PALLET CONVEYORS WITH SIEMENS S7 PLC 23. PALLET WRAPPER ROBOPAC GENESIS, YEAR 1997 CONTROL PLC SIEMENS S7 LIFTING TABLE IS MISSING OUTPUT CONVEYOR SER. ? 467090298 24. PALLET CODER METEC 25. MAIN ELECTRICAL DISTRIBUTION CABINETS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-manufacturer: homagtürenfertigung mit  mit verleimteil und kuka roboter, type: bof / baz20/50/18/2/d, year: 2002, control: homatic pc 83, software: woodwop, work piece width min-max mm: 1600, min.-max. workpiece length in mm: 800 - 3500, min.-max. workpiece height in mm: 12 - 60/120, working range x: 5800, working range y-axis: 1600, working range z: 160, c axis: 2, work piece width min-max mm: 1600, min.-max. workpiece length in mm: 800 - 3500, min.-max. workpiece height in mm: 12 - 60/120, number of milling spindles vertical: 2, tool adaption system: hsk f63, milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, kettenwechsler: 70, pickup wechlser: 6, number of tools per tool-magazine: 6 + 70+ 20, mitfahrender werkzeugwechsler: yes, belt conveyor: yes, 2 station allocation: yes, vacuum pumps m³/h: 2 x 66, rigging support table: automatisch, saw unit: yes, edgebanding unit: yes, edgeband hight mm: 90, radial arm machine: yes, laser positioning: yes, incl. tools: yes, schnittstelle dxf: yes, automatic setting up table: yes, destacking unit: yes, waste conveyor belt: yes, automatic charging: yes, free text: bestandteile der anlage: kuka roboter und rückführung transportrollengägen/wandress reinigungsanlage/etikettendrucker und komplettes werkzeug, year :2002 MANUFACTURER: HOMAGT&UUML;RENFERTIGUNG MIT MIT VERLEIMTEIL UND KUKA ROBOTER, TYPE: BOF / BAZ20/50/18/2/D, YEAR: 2002, CONTROL: HOMATIC PC 83, SOFTWARE: WOODWOP, WORK PIECE WIDTH MIN-MAX MM: 1600, MIN.-MAX. WORKPIECE LENGTH IN MM: 800 - 3500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 12 - 60/120, WORKING RANGE X: 5800, WORKING RANGE Y-AXIS: 1600, WORKING RANGE Z: 160, C AXIS: 2, WORK PIECE WIDTH MIN-MAX MM: 1600, MIN.-MAX. WORKPIECE LENGTH IN MM: 800 - 3500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 12 - 60/120, NUMBER OF MILLING SPINDLES VERTICAL: 2, TOOL ADAPTION SYSTEM: HSK F63, MILLING ENGINE 1 HOURS POWER: 14,5, RPM 1): 1500 - 18.000, MILLING ENGINE 2 HOURS POWER: 14,5, RPM 2): 1500 - 18.000, KETTENWECHSLER: 70, PICKUP WECHLSER: 6, NUMBER OF TOOLS PER TOOL-MAGAZINE: 6 + 70+ 20, MITFAHRENDER WERKZEUGWECHSLER: YES, BELT CONVEYOR: YES, 2 STATION ALLOCATION: YES, VACUUM PUMPS M&SUP3;/H: 2 X 66, RIGGING SUPPORT TABLE: AUTOMATISCH, SAW UNIT: YES, EDGEBANDING UNIT: YES, EDGEBAND HIGHT MM: 90, RADIAL ARM MACHINE: YES, LASER POSITIONING: YES, INCL. TOOLS: YES, SCHNITTSTELLE DXF: YES, AUTOMATIC SETTING UP TABLE: YES, DESTACKING UNIT: YES, WASTE CONVEYOR BELT: YES, AUTOMATIC CHARGING: YES, FREE TEXT: BESTANDTEILE DER ANLAGE: KUKA ROBOTER UND R&UUML;CKF&UUML;HRUNG TRANSPORTROLLENG&AUML;GEN/WANDRESS REINIGUNGSANLAGE/ETIKETTENDRUCKER UND KOMPLETTES WERKZEUG, YEAR :2002
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-filling line khs 50 000 bottles / hour for returnable glass bottles 
  
this glass line was installed and commissioned by khs in year 2008 and operation was stopped in year 2009 and it was then properly cleaned and preserved, all plc programs were copied in that time. equipment has just 3600 total working hours and presently complete line is in perfect condition. the line is designed to fill beer in 0.5 litre returnable glass bottles at capacity of 50 000 bph bottles arriving and leaving in plastic crates placed on wooden pallets. all bottle conveyors are made by khs and they have automatic lubrication system, sew servo drives and danfos frequency converters.  full documentation in german and russian language, plc programs with comments in german language. 
 
main characteristics of this line
  
manufacturer	khs germany 
manufacturing year	2008 
capacity	50 000 bph 
total running hours	approx. 3600 only 
bottles	returnable 0.5 liter glass
caps	crown cork  
plastic case size for 20 bottles	400 x 300 x 277 mm
crate on a pallet	10 in a layer, stacked in 5 layers  
pallet size	1200 x 1000 mm + euro pallet  
plc controls	siemens s7 series and kuka 
 FILLING LINE KHS 50 000 BOTTLES / HOUR FOR RETURNABLE GLASS BOTTLES THIS GLASS LINE WAS INSTALLED AND COMMISSIONED BY KHS IN YEAR 2008 AND OPERATION WAS STOPPED IN YEAR 2009 AND IT WAS THEN PROPERLY CLEANED AND PRESERVED, ALL PLC PROGRAMS WERE COPIED IN THAT TIME. EQUIPMENT HAS JUST 3600 TOTAL WORKING HOURS AND PRESENTLY COMPLETE LINE IS IN PERFECT CONDITION. THE LINE IS DESIGNED TO FILL BEER IN 0.5 LITRE RETURNABLE GLASS BOTTLES AT CAPACITY OF 50 000 BPH BOTTLES ARRIVING AND LEAVING IN PLASTIC CRATES PLACED ON WOODEN PALLETS. ALL BOTTLE CONVEYORS ARE MADE BY KHS AND THEY HAVE AUTOMATIC LUBRICATION SYSTEM, SEW SERVO DRIVES AND DANFOS FREQUENCY CONVERTERS. FULL DOCUMENTATION IN GERMAN AND RUSSIAN LANGUAGE, PLC PROGRAMS WITH COMMENTS IN GERMAN LANGUAGE. MAIN CHARACTERISTICS OF THIS LINE MANUFACTURER KHS GERMANY MANUFACTURING YEAR 2008 CAPACITY 50 000 BPH TOTAL RUNNING HOURS APPROX. 3600 ONLY BOTTLES RETURNABLE 0.5 LITER GLASS CAPS CROWN CORK PLASTIC CASE SIZE FOR 20 BOTTLES 400 X 300 X 277 MM CRATE ON A PALLET 10 IN A LAYER, STACKED IN 5 LAYERS PALLET SIZE 1200 X 1000 MM + EURO PALLET PLC CONTROLS SIEMENS S7 SERIES AND KUKA
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 88.000 €
Ubicación: Land-description:<br />\ncurrently, the packer  packs different types of standard beer bottles in the standard beer crate. max 375 cycles with 8 heads per 20 bottles incl. the environment with crate switch 1 on 2 lanes and box switch 2 lanes on a train.<br />\n<br />\nthe machine is still in operation until february 2019.<br />\n<br />\n<br />\nnumber of heads:<br />\n8<br />\n<br />\ncapacity:<br />\n30.000-60000 fl./h<br />\n<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NCURRENTLY, THE PACKER PACKS DIFFERENT TYPES OF STANDARD BEER BOTTLES IN THE STANDARD BEER CRATE. MAX 375 CYCLES WITH 8 HEADS PER 20 BOTTLES INCL. THE ENVIRONMENT WITH CRATE SWITCH 1 ON 2 LANES AND BOX SWITCH 2 LANES ON A TRAIN.
\N
\NTHE MACHINE IS STILL IN OPERATION UNTIL FEBRUARY 2019.
\N
\N
\NNUMBER OF HEADS:
\N8
\N
\NCAPACITY:
\N30.000-60000 FL./H
\N
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-thera are two identical robots available, max. load: 30kg, controls: rc 30/51, year of construction robot 1/ 2: 1994/ 1995.  THERA ARE TWO IDENTICAL ROBOTS AVAILABLE, MAX. LOAD: 30KG, CONTROLS: RC 30/51, YEAR OF CONSTRUCTION ROBOT 1/ 2: 1994/ 1995.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-description:<br />\npalletizer / pallet loader incl. kuka robot<br />\n<br />\nthe kuka robot distributes two crates coincident from the central single-lane inlet to two lanes. then the crates are centered and the loader loads 2 x 4 crates on the pallet.<br />\n<br />\nprice on request<br />\n<br />\npalletizer / pallet loader incl. kuka robot<br />\n<br />\nthe kuka robot distributes two crates coincident from the central single-lane inlet to two lanes. then the crates are centered and the loader loads 2 x 4 crates on the pallet.<br />\n<br />\nprice on request<br />\n<br />\n\r<br />\nbesides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />\r\nyou have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />\r\nor do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />\r\nask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />\r\nour drink technicians are working worldwide for our customers!<br />\r\nwe are looking forward to hearing from you.<br />\r\n<br />\r\nall information is supplied without guarantee. DESCRIPTION:
\NPALLETIZER / PALLET LOADER INCL. KUKA ROBOT
\N
\NTHE KUKA ROBOT DISTRIBUTES TWO CRATES COINCIDENT FROM THE CENTRAL SINGLE-LANE INLET TO TWO LANES. THEN THE CRATES ARE CENTERED AND THE LOADER LOADS 2 X 4 CRATES ON THE PALLET.
\N
\NPRICE ON REQUEST
\N
\NPALLETIZER / PALLET LOADER INCL. KUKA ROBOT
\N
\NTHE KUKA ROBOT DISTRIBUTES TWO CRATES COINCIDENT FROM THE CENTRAL SINGLE-LANE INLET TO TWO LANES. THEN THE CRATES ARE CENTERED AND THE LOADER LOADS 2 X 4 CRATES ON THE PALLET.
\N
\NPRICE ON REQUEST
\N
\N\R
\NBESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
\R\NYOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
\R\NOR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
\R\NASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
\R\NOUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
\R\NWE ARE LOOKING FORWARD TO HEARING FROM YOU.
\R\N
\R\NALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. payload: 125kg, max. additional load: 120kg, max. total load: 245kg, arm length: 1000mm, number of axis: 6, controls: k c1, weight: 975kg.  MAX. PAYLOAD: 125KG, MAX. ADDITIONAL LOAD: 120KG, MAX. TOTAL LOAD: 245KG, ARM LENGTH: 1000MM, NUMBER OF AXIS: 6, CONTROLS: K C1, WEIGHT: 975KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 6000 mm<br/>y-travel: 6000 mm<br/>: 4000 mm<br/>tool taper: hsk 63 a <br/>turning speeds: 18.000 u/min<br/>output: 13,5 kw<br/>traversing speed: 1,0 m/sec<br/>total power requirement:  kw<br/>weight of the machine ca.: 3,0 t<br/>dimensions of the machine ca.: 10x9x4 m<br/>kuka robot lr 210 r 3100 ultra / quantec series<br/>control: kr c4<br/>with all modules for application milling<br/>range: 3100 mm<br/>mounted on the x-y portal<br/><br/>high frequency spindle hsd<br/>tool change pneumatically<br/>water cooled<br/>mounted on the robot flange<br/><br/>xy surface portal 6x6 m for kuka robots<br/>robot hanging down<br/>the gantry portal consists of 2 gantry axes zld 52-52 as welded steel <br/>construction and 1 gantry axis zld 72-72 running on top of the girders<br/><br/>tool changing system<br/>2x automatic tool change for 10 tools hsk 63 a<br/><br/>software package cadcam 2d<br/><br/><br/><br/><br/> X-TRAVEL: 6000 MM
Y-TRAVEL: 6000 MM
: 4000 MM
TOOL TAPER: HSK 63 A
TURNING SPEEDS: 18.000 U/MIN
OUTPUT: 13,5 KW
TRAVERSING SPEED: 1,0 M/SEC
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 3,0 T
DIMENSIONS OF THE MACHINE CA.: 10X9X4 M
KUKA ROBOT LR 210 R 3100 ULTRA / QUANTEC SERIES
CONTROL: KR C4
WITH ALL MODULES FOR APPLICATION MILLING
RANGE: 3100 MM
MOUNTED ON THE X-Y PORTAL

HIGH FREQUENCY SPINDLE HSD
TOOL CHANGE PNEUMATICALLY
WATER COOLED
MOUNTED ON THE ROBOT FLANGE

XY SURFACE PORTAL 6X6 M FOR KUKA ROBOTS
ROBOT HANGING DOWN
THE GANTRY PORTAL CONSISTS OF 2 GANTRY AXES ZLD 52-52 AS WELDED STEEL
CONSTRUCTION AND 1 GANTRY AXIS ZLD 72-72 RUNNING ON TOP OF THE GIRDERS

TOOL CHANGING SYSTEM
2X AUTOMATIC TOOL CHANGE FOR 10 TOOLS HSK 63 A

SOFTWARE PACKAGE CADCAM 2D




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-operating hours: 500 h	
control system: krc v5.5.7	
low payloads : (6-22 kg)	
payload: 16 kg	
total load: 16 kg	
maximum reach: 1612 mm	
number of controlled axes: 6	
position repeatability:	
(iso 9283): ±0.04 mm	
weight: 245 kg	
kr 16 as a console robot	
kr 16 in the foundry variant OPERATING HOURS: 500 H CONTROL SYSTEM: KRC V5.5.7 LOW PAYLOADS : (6-22 KG) PAYLOAD: 16 KG TOTAL LOAD: 16 KG MAXIMUM REACH: 1612 MM NUMBER OF CONTROLLED AXES: 6 POSITION REPEATABILITY: (ISO 9283): ±0.04 MM WEIGHT: 245 KG KR 16 AS A CONSOLE ROBOT KR 16 IN THE FOUNDRY VARIANT
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 210 kg<br/>throat: 2900 mm<br/>payload: 180 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1245 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 210 KG
THROAT: 2900 MM
PAYLOAD: 180
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1245 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-stock no. 12047
manufacturer krauss maffei
machine type km 1600-14700 mc
year of manufacture 2002
site eschweiler
control type 4 mc
teletext in german
hours of operation 75000 h
delivery time immediately
price on request
technical details
clamping unit
clamping force of 16000 kn
tool opening force, max. 	1109 kn
177 kn open driving force moving plate
153 kn close driving force moving plate
mounting plate (h x v) 2500 x 2110 mm
clear width (h x v) 1800 x 1400 mm
tool unclamping stroke 2500 mm
mould installation height min. 	900 mm
mould installation height max. 	1600 mm
opening width 3400 mm
injection unit
screw diameter 120 mm
ls/d ratio 22
injection pressure 2266 bar
ccm displacement 6503
shot weight 5918 g
injection current 1151 cc/s
screw speed 80 1/min
plasticizing power max. 	129 g / s
nozzles attachment force 166 kn
electro-hydraulic equipment
rated power of pump motor 160 kw
installed heating capacity 91 kw
zones of control cylinder heating 7
dry run number 450 1/h
oil filling 2750 ltr.
dimensions and weights
space requirement approx. 	14.00 x 4,00 x 3,00 m
total 120,000 kg
maximum tool weight 43000 kg

accessories:
-dampers
-kuka robot svl 150l 100 k

additional information:
-1 x air valve
-3 x core pulling
-robot interface according to euromap 12
-machine without ejector STOCK NO. 12047 MANUFACTURER KRAUSS MAFFEI MACHINE TYPE KM 1600-14700 MC YEAR OF MANUFACTURE 2002 SITE ESCHWEILER CONTROL TYPE 4 MC TELETEXT IN GERMAN HOURS OF OPERATION 75000 H DELIVERY TIME IMMEDIATELY PRICE ON REQUEST TECHNICAL DETAILS CLAMPING UNIT CLAMPING FORCE OF 16000 KN TOOL OPENING FORCE, MAX. 1109 KN 177 KN OPEN DRIVING FORCE MOVING PLATE 153 KN CLOSE DRIVING FORCE MOVING PLATE MOUNTING PLATE (H X V) 2500 X 2110 MM CLEAR WIDTH (H X V) 1800 X 1400 MM TOOL UNCLAMPING STROKE 2500 MM MOULD INSTALLATION HEIGHT MIN. 900 MM MOULD INSTALLATION HEIGHT MAX. 1600 MM OPENING WIDTH 3400 MM INJECTION UNIT SCREW DIAMETER 120 MM LS/D RATIO 22 INJECTION PRESSURE 2266 BAR CCM DISPLACEMENT 6503 SHOT WEIGHT 5918 G INJECTION CURRENT 1151 CC/S SCREW SPEED 80 1/MIN PLASTICIZING POWER MAX. 129 G / S NOZZLES ATTACHMENT FORCE 166 KN ELECTRO-HYDRAULIC EQUIPMENT RATED POWER OF PUMP MOTOR 160 KW INSTALLED HEATING CAPACITY 91 KW ZONES OF CONTROL CYLINDER HEATING 7 DRY RUN NUMBER 450 1/H OIL FILLING 2750 LTR. DIMENSIONS AND WEIGHTS SPACE REQUIREMENT APPROX. 14.00 X 4,00 X 3,00 M TOTAL 120,000 KG MAXIMUM TOOL WEIGHT 43000 KG ACCESSORIES: -DAMPERS -KUKA ROBOT SVL 150L 100 K ADDITIONAL INFORMATION: -1 X AIR VALVE -3 X CORE PULLING -ROBOT INTERFACE ACCORDING TO EUROMAP 12 -MACHINE WITHOUT EJECTOR
Vendedor: Reza Zadeh Kunststoff- & Maschinentechnik GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2900 mm<br/>payload: 130 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1245 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2900 MM
PAYLOAD: 130
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1245 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-1 x industrial robot kuka ir 365 1 X INDUSTRIAL ROBOT KUKA IR 365
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 210 kg<br/>throat: 2700 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1165 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 210 KG
THROAT: 2700 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1165 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-load: 125kg, reach: 2410mm, table diameter: 600mm, max. table load: 500kg, controls: ver-1b, weight: 1,12t, including welding machine lorch saprom s8.  LOAD: 125KG, REACH: 2410MM, TABLE DIAMETER: 600MM, MAX. TABLE LOAD: 500KG, CONTROLS: VER-1B, WEIGHT: 1,12T, INCLUDING WELDING MACHINE LORCH SAPROM S8.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>payload: 150 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1245 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
PAYLOAD: 150
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1245 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-hot filling line pet 9.900 bph in 1 liter square bottles 
  
this is a complete line for hot filling of juices with pulp. the line was made in 2007 by various us and uk manufacturers and is in excellent condition. the line is complete from depalletizer and empty bottle inspection to secondary packing and pallet stretch wrapping. the filler includes a sealer which seals the bottle mouth with an aluminum foil before capping. the line is operational until may 2018 and can be seen in operation before that, and it is also available for an earlier sale.  
 
technical data: 
  
year: 	2007 
capacity: 	9.900 bph in 1 liter bottle
product: 	fruit juice with pulp
bottle sizes: 	1 liter square
	16 oz round
running hours: 	12.000 hrs approx.
electricity: 	230 / 460 v, 60 hz 
control plc: 	allen bradley 
 
list of main equipment:
 
1.	depalletizer: aidco, sweeptar dhbd 
2.	transfer unit: travtec, paratran ii
3.	date coder: hitachi, rx-sd160w
4.	visual bottle inspection: optel vision, op300
5.	bottle rinser: mcbrady engineering, 600-gripper 
6.	bottle filler: filler specialties, 8607ac12r
7.	bottle sealer: fords, press 330 md
8.	bottle capper: filler specialties 
9.	full bottle weight inspection unit: thermo fisher, acap/8120
10.	leak detection unit: teledyne taptone, t1000-f,c,x
11.	pasteurizer: g.c. evans, cc-8028
12.	labeler: ford engineering
13.	metal detector: thermo fisher, inscan 200 ei p/n 
14.	cap detector: unknown
15.	carton erector: lantech, c-2000
16.	bottle to carton packer: kuka, kr180pa, year 2003
17.	carton tape applicate: bel, 252v.02
18.	carton coder: evolution, c21030
19.	full carton inspector: thermo electron, ramsey ac4000
20.	palletizer robot: kuka, kr180pa, year 2004
21.	pallet stretch wrapper: cousins, 3300-a 
22.	conveyor system: hytrol
  
all equipment made in 2007, unless noted otherwise.  HOT FILLING LINE PET 9.900 BPH IN 1 LITER SQUARE BOTTLES THIS IS A COMPLETE LINE FOR HOT FILLING OF JUICES WITH PULP. THE LINE WAS MADE IN 2007 BY VARIOUS US AND UK MANUFACTURERS AND IS IN EXCELLENT CONDITION. THE LINE IS COMPLETE FROM DEPALLETIZER AND EMPTY BOTTLE INSPECTION TO SECONDARY PACKING AND PALLET STRETCH WRAPPING. THE FILLER INCLUDES A SEALER WHICH SEALS THE BOTTLE MOUTH WITH AN ALUMINUM FOIL BEFORE CAPPING. THE LINE IS OPERATIONAL UNTIL MAY 2018 AND CAN BE SEEN IN OPERATION BEFORE THAT, AND IT IS ALSO AVAILABLE FOR AN EARLIER SALE. TECHNICAL DATA: YEAR: 2007 CAPACITY: 9.900 BPH IN 1 LITER BOTTLE PRODUCT: FRUIT JUICE WITH PULP BOTTLE SIZES: 1 LITER SQUARE 16 OZ ROUND RUNNING HOURS: 12.000 HRS APPROX. ELECTRICITY: 230 / 460 V, 60 HZ CONTROL PLC: ALLEN BRADLEY LIST OF MAIN EQUIPMENT: 1. DEPALLETIZER: AIDCO, SWEEPTAR DHBD 2. TRANSFER UNIT: TRAVTEC, PARATRAN II 3. DATE CODER: HITACHI, RX-SD160W 4. VISUAL BOTTLE INSPECTION: OPTEL VISION, OP300 5. BOTTLE RINSER: MCBRADY ENGINEERING, 600-GRIPPER 6. BOTTLE FILLER: FILLER SPECIALTIES, 8607AC12R 7. BOTTLE SEALER: FORDS, PRESS 330 MD 8. BOTTLE CAPPER: FILLER SPECIALTIES 9. FULL BOTTLE WEIGHT INSPECTION UNIT: THERMO FISHER, ACAP/8120 10. LEAK DETECTION UNIT: TELEDYNE TAPTONE, T1000-F,C,X 11. PASTEURIZER: G.C. EVANS, CC-8028 12. LABELER: FORD ENGINEERING 13. METAL DETECTOR: THERMO FISHER, INSCAN 200 EI P/N 14. CAP DETECTOR: UNKNOWN 15. CARTON ERECTOR: LANTECH, C-2000 16. BOTTLE TO CARTON PACKER: KUKA, KR180PA, YEAR 2003 17. CARTON TAPE APPLICATE: BEL, 252V.02 18. CARTON CODER: EVOLUTION, C21030 19. FULL CARTON INSPECTOR: THERMO ELECTRON, RAMSEY AC4000 20. PALLETIZER ROBOT: KUKA, KR180PA, YEAR 2004 21. PALLET STRETCH WRAPPER: COUSINS, 3300-A 22. CONVEYOR SYSTEM: HYTROL ALL EQUIPMENT MADE IN 2007, UNLESS NOTED OTHERWISE.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>payload: 150 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1245 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
PAYLOAD: 150
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1245 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones-khs 55 0000 bph with bwm
 
this line is designed for new and returnable 0.33 and 0.5 liter glass bottles and it can handle up to 55 000 bph. the line was originally built in year 1998 but it has been heavily upgraded from 2002 to 2008. the line has two years ago refurbished khs bottle washer. original equipment has siemens simatic s5 plc but 2002 and onwards machines have simatic s7 plcs. secondary packaging of this line includes a tray shrink wrapper, palletizer and pallet shrink wrapper. the production stopped in 2016. all equipment is in good condition, the line is installed and ready for delivery.
 
the list of main equipment of the line:
 
• khs innopal depalletizer with empty pallet magazine, 2002, control kuka
• bottle conveyors, siemens s5
• bottle washer khs innoclean ee 52/87, up to 50.800 bph, single-end, 2002
• conveyor of empty bottles
• empty bottle inspector heuft spectrum hbbsx b72, four pushers, control heuft, 2008
• filling block khs innofill dr 132/24, crown/twist-off/ring-pull caps, siemens s5, 1998
• level inspector heuft spectrum hbbvxt i60, cap & level inspection, 2007
• conveyor for full bottles
• pasteurizer khs/apv, buffer tank kronjysk 130 hl, siemens s7, 1998
• labeler krones multimodul, three labels, paper & film, cold glue, servos, siemens s7, 2006
• label inspector krones fm-x, 2006
• shrink film packer khs kisters tsp 060b, 60 tact/min, tray+film, siemens s7, 2004
• palletizer krones/kettner, two pallets in parallel, pallet magazine, siemens s5, 2002
• conveyors of boxes, siemens s5
• pallet wrapper franpack, elevator table, siemens s 5, 1998
• main electrical distribution cabinets  GLASS BOTTLE FILLING LINE KRONES-KHS 55 0000 BPH WITH BWM THIS LINE IS DESIGNED FOR NEW AND RETURNABLE 0.33 AND 0.5 LITER GLASS BOTTLES AND IT CAN HANDLE UP TO 55 000 BPH. THE LINE WAS ORIGINALLY BUILT IN YEAR 1998 BUT IT HAS BEEN HEAVILY UPGRADED FROM 2002 TO 2008. THE LINE HAS TWO YEARS AGO REFURBISHED KHS BOTTLE WASHER. ORIGINAL EQUIPMENT HAS SIEMENS SIMATIC S5 PLC BUT 2002 AND ONWARDS MACHINES HAVE SIMATIC S7 PLCS. SECONDARY PACKAGING OF THIS LINE INCLUDES A TRAY SHRINK WRAPPER, PALLETIZER AND PALLET SHRINK WRAPPER. THE PRODUCTION STOPPED IN 2016. ALL EQUIPMENT IS IN GOOD CONDITION, THE LINE IS INSTALLED AND READY FOR DELIVERY. THE LIST OF MAIN EQUIPMENT OF THE LINE: • KHS INNOPAL DEPALLETIZER WITH EMPTY PALLET MAGAZINE, 2002, CONTROL KUKA • BOTTLE CONVEYORS, SIEMENS S5 • BOTTLE WASHER KHS INNOCLEAN EE 52/87, UP TO 50.800 BPH, SINGLE-END, 2002 • CONVEYOR OF EMPTY BOTTLES • EMPTY BOTTLE INSPECTOR HEUFT SPECTRUM HBBSX B72, FOUR PUSHERS, CONTROL HEUFT, 2008 • FILLING BLOCK KHS INNOFILL DR 132/24, CROWN/TWIST-OFF/RING-PULL CAPS, SIEMENS S5, 1998 • LEVEL INSPECTOR HEUFT SPECTRUM HBBVXT I60, CAP & LEVEL INSPECTION, 2007 • CONVEYOR FOR FULL BOTTLES • PASTEURIZER KHS/APV, BUFFER TANK KRONJYSK 130 HL, SIEMENS S7, 1998 • LABELER KRONES MULTIMODUL, THREE LABELS, PAPER & FILM, COLD GLUE, SERVOS, SIEMENS S7, 2006 • LABEL INSPECTOR KRONES FM-X, 2006 • SHRINK FILM PACKER KHS KISTERS TSP 060B, 60 TACT/MIN, TRAY+FILM, SIEMENS S7, 2004 • PALLETIZER KRONES/KETTNER, TWO PALLETS IN PARALLEL, PALLET MAGAZINE, SIEMENS S5, 2002 • CONVEYORS OF BOXES, SIEMENS S5 • PALLET WRAPPER FRANPACK, ELEVATOR TABLE, SIEMENS S 5, 1998 • MAIN ELECTRICAL DISTRIBUTION CABINETS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>payload: 150 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1245 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
PAYLOAD: 150
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1245 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-depalletizer khs innopal as-1-h with pallet magazine, year 2004
 
accurate and flexible high performance depalletizer innopal as-1-h with pallet magazine by khs (germany), manufactured in year 2004, capacity 60 000 bph or 420 layers/hour. the innopal as-1-h is a bulk depalletizer is suitable for processing containers made of glass, plastic, or metal. fast product changeover is achieved thanks to a motor-driven adjustable push-off carriage. the three-sided pallet in-feed area and the closed well in the push-off area makes the innopal as-1-h ideal for processing unstable containers. control panel is kuka and control system is siemens simatic s7. the delivery includes complete equipment for a depalletizing system. equipment is in very good condition and ready for immediate delivery.
 
 
technical specifications:
manufacturer: khs
machine type: innopal as-1-h
manufacturer year: 2004
capacity: 60 000 bph or 420 layer/hour
used bottle size: 0.5-liter glass bottles
max block height including pallet: 3000 mm.
pallet dimensions: 800 x 1450 mm and 1000 x 1250 mm.
machine dimensions: 3610 x 3085 x 5725 mm.
machine weight: 7500 kg.  DEPALLETIZER KHS INNOPAL AS-1-H WITH PALLET MAGAZINE, YEAR 2004 ACCURATE AND FLEXIBLE HIGH PERFORMANCE DEPALLETIZER INNOPAL AS-1-H WITH PALLET MAGAZINE BY KHS (GERMANY), MANUFACTURED IN YEAR 2004, CAPACITY 60 000 BPH OR 420 LAYERS/HOUR. THE INNOPAL AS-1-H IS A BULK DEPALLETIZER IS SUITABLE FOR PROCESSING CONTAINERS MADE OF GLASS, PLASTIC, OR METAL. FAST PRODUCT CHANGEOVER IS ACHIEVED THANKS TO A MOTOR-DRIVEN ADJUSTABLE PUSH-OFF CARRIAGE. THE THREE-SIDED PALLET IN-FEED AREA AND THE CLOSED WELL IN THE PUSH-OFF AREA MAKES THE INNOPAL AS-1-H IDEAL FOR PROCESSING UNSTABLE CONTAINERS. CONTROL PANEL IS KUKA AND CONTROL SYSTEM IS SIEMENS SIMATIC S7. THE DELIVERY INCLUDES COMPLETE EQUIPMENT FOR A DEPALLETIZING SYSTEM. EQUIPMENT IS IN VERY GOOD CONDITION AND READY FOR IMMEDIATE DELIVERY. TECHNICAL SPECIFICATIONS: MANUFACTURER: KHS MACHINE TYPE: INNOPAL AS-1-H MANUFACTURER YEAR: 2004 CAPACITY: 60 000 BPH OR 420 LAYER/HOUR USED BOTTLE SIZE: 0.5-LITER GLASS BOTTLES MAX BLOCK HEIGHT INCLUDING PALLET: 3000 MM. PALLET DIMENSIONS: 800 X 1450 MM AND 1000 X 1250 MM. MACHINE DIMENSIONS: 3610 X 3085 X 5725 MM. MACHINE WEIGHT: 7500 KG.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>payload: 150 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1245 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
PAYLOAD: 150
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1245 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-pet bottle filling line khs 15 750 - 30 000 bph

this complete beer filling line was delivered by khs in year 2005 and it is still installed and in very good condition. this line is complete from preform feeding equipment to delivery package palletizing. originally this line was designed to fill from 0.5, 1.5 to 2.0 liter pet bottles with max 6 gram / liter co2 and max + 16 c degree product temperature. in 2006 it was modified for 2.5 liter with adding a new labeler. line is available for immediate relocation

main characteristics of this line:
manufacturer: khs gmbh
operation started in: year 2006
total working hours: approx 27 000
condition: operation stopped in september 2014, installed
effective capacity: 30 000 bph in 0.5 l pet
22 000 bph in 1.5 l pet
15 750 bph in 2.0 l pet
neck standard: pco 28 mm
delivery packs 2.0 -2.5 l pet in 2 x 3 tray and shrink plastic
1.5 l pet in 3 x 3 tray and shrink plastic
1,5 l pet in 3 x 3 only shrink plastic
labeling: paper label, cold glue, front and neck
plastic label, hot glue, front
products used for: beer
control plc siemens simatic s 7 / et 200
line suitable with mixer for: carbonated and non carbonated drinks

videos of this line:

general introduction: abcs://abc.youtube.com/watch?v=r1zhabvf7bg

list of equipment
item 1: stretch blow molding machine sig blomax 14, serie iii
nominal capacity 32000 bph in 0.5 liter and 17 500 in 2.0 liter
max bottle height is 380 mm, max diameter 108 mm
serie iii is equipment with airback / air recycling system
complete preform feeding system by tanner with safety fence
riedel cooler for the blow molder equipment with r407c freon + radiator cooler

item 2: pet compressor ateliers francois 2100 nm3/h
compressor is 3-stage, intercooled ge68b, 480 rpm, 350 kw
air dryer and 40 bar galvanized air receiver 1 m3
radiator type water-air cooler for compressor cooling

item 3: khs air-conveyor system innoline ltr
automatic size adjustment- suitable for 49-108 mm diameter bottles

item 4: filler block with
rinser khs innorins pet-fr-zm 80/36
this is a mechanical rinser with a two-channel working for pre-rinsing
with water or disinfectant. final rinsing with water. 80 rinsing stations and 2880 mm rinser diamer.

filler - capper khs innofill drf pet 120 sc 10/36
the innofill drf pet is a computer-controlled, pet bottle filler that uses probes integrated into the filling tubes to determine fill levels. the filler has 120 filling nozzles and 10 capping stations for pco 28 caps. nsm magnettechnic cap feeding system.

item 5: filling control station heuft basic ba r20 with x-ray, capacity 25 000 bph

item 6: full bottle conveyor system innoline btr with automatic lubrication system

item 7: labeling machine innoket roland kh 20/5 ii, capacity 4000 - 32000 labels/h
this roland labelers has 20 bottle turrets and 2 labeling stations with 5-finger drums for label application. paper labels, cold glue system.

a feedscrew spaces the containers before they are channeled into the rotating machine
by an infeed star. hot glue is evenly distributed, thin film of glue on the gluing segments picks up labels from the stationary magazine. the individually spring loaded fingers of the gripper drum grasp the glued labels and apply them in the exact position on the containers.

item 8: laser marking system coder allmark al 882 aps

item 9: label inspector heuft basic ba r20 with x-ray

item 10: labeling machine krones contirol k-745-l17, year 2006
plastic labels, hot glue system, 2 rolls with automatic switch over
capacity 15 000 - 17 000 bph with 2.5 liter per

item 11: tray shrink packer khs tsp 35-700, year 2007
capacity up to 35 cycles per minute

item 12: tray conveyors khs innoline gtr with automatic lubrication system

item 13: label inserter metec on delivery packs

item 14: palletizer khs innopal pb 1/2 n2 capacity 27 000 bph in 1.5 liter
double line palletizer suitable for 800x1000 and 1000x1200 cm pallets
pallet magazine khs mph
carton layer inserter robot
khs ptr pallet conveyors
kuka / siemens plc controls

item 15: pallet stretch wrapper robopac helix hs 40
siemens simatic s 7 plc contols

item 16: pallet lift khs lord pac with a pallet coder  PET BOTTLE FILLING LINE KHS 15 750 - 30 000 BPH THIS COMPLETE BEER FILLING LINE WAS DELIVERED BY KHS IN YEAR 2005 AND IT IS STILL INSTALLED AND IN VERY GOOD CONDITION. THIS LINE IS COMPLETE FROM PREFORM FEEDING EQUIPMENT TO DELIVERY PACKAGE PALLETIZING. ORIGINALLY THIS LINE WAS DESIGNED TO FILL FROM 0.5, 1.5 TO 2.0 LITER PET BOTTLES WITH MAX 6 GRAM / LITER CO2 AND MAX + 16 C DEGREE PRODUCT TEMPERATURE. IN 2006 IT WAS MODIFIED FOR 2.5 LITER WITH ADDING A NEW LABELER. LINE IS AVAILABLE FOR IMMEDIATE RELOCATION MAIN CHARACTERISTICS OF THIS LINE: MANUFACTURER: KHS GMBH OPERATION STARTED IN: YEAR 2006 TOTAL WORKING HOURS: APPROX 27 000 CONDITION: OPERATION STOPPED IN SEPTEMBER 2014, INSTALLED EFFECTIVE CAPACITY: 30 000 BPH IN 0.5 L PET 22 000 BPH IN 1.5 L PET 15 750 BPH IN 2.0 L PET NECK STANDARD: PCO 28 MM DELIVERY PACKS 2.0 -2.5 L PET IN 2 X 3 TRAY AND SHRINK PLASTIC 1.5 L PET IN 3 X 3 TRAY AND SHRINK PLASTIC 1,5 L PET IN 3 X 3 ONLY SHRINK PLASTIC LABELING: PAPER LABEL, COLD GLUE, FRONT AND NECK PLASTIC LABEL, HOT GLUE, FRONT PRODUCTS USED FOR: BEER CONTROL PLC SIEMENS SIMATIC S 7 / ET 200 LINE SUITABLE WITH MIXER FOR: CARBONATED AND NON CARBONATED DRINKS VIDEOS OF THIS LINE: GENERAL INTRODUCTION: ABCS://ABC.YOUTUBE.COM/WATCH?V=R1ZHABVF7BG LIST OF EQUIPMENT ITEM 1: STRETCH BLOW MOLDING MACHINE SIG BLOMAX 14, SERIE III NOMINAL CAPACITY 32000 BPH IN 0.5 LITER AND 17 500 IN 2.0 LITER MAX BOTTLE HEIGHT IS 380 MM, MAX DIAMETER 108 MM SERIE III IS EQUIPMENT WITH AIRBACK / AIR RECYCLING SYSTEM COMPLETE PREFORM FEEDING SYSTEM BY TANNER WITH SAFETY FENCE RIEDEL COOLER FOR THE BLOW MOLDER EQUIPMENT WITH R407C FREON + RADIATOR COOLER ITEM 2: PET COMPRESSOR ATELIERS FRANCOIS 2100 NM3/H COMPRESSOR IS 3-STAGE, INTERCOOLED GE68B, 480 RPM, 350 KW AIR DRYER AND 40 BAR GALVANIZED AIR RECEIVER 1 M3 RADIATOR TYPE WATER-AIR COOLER FOR COMPRESSOR COOLING ITEM 3: KHS AIR-CONVEYOR SYSTEM INNOLINE LTR AUTOMATIC SIZE ADJUSTMENT- SUITABLE FOR 49-108 MM DIAMETER BOTTLES ITEM 4: FILLER BLOCK WITH RINSER KHS INNORINS PET-FR-ZM 80/36 THIS IS A MECHANICAL RINSER WITH A TWO-CHANNEL WORKING FOR PRE-RINSING WITH WATER OR DISINFECTANT. FINAL RINSING WITH WATER. 80 RINSING STATIONS AND 2880 MM RINSER DIAMER. FILLER - CAPPER KHS INNOFILL DRF PET 120 SC 10/36 THE INNOFILL DRF PET IS A COMPUTER-CONTROLLED, PET BOTTLE FILLER THAT USES PROBES INTEGRATED INTO THE FILLING TUBES TO DETERMINE FILL LEVELS. THE FILLER HAS 120 FILLING NOZZLES AND 10 CAPPING STATIONS FOR PCO 28 CAPS. NSM MAGNETTECHNIC CAP FEEDING SYSTEM. ITEM 5: FILLING CONTROL STATION HEUFT BASIC BA R20 WITH X-RAY, CAPACITY 25 000 BPH ITEM 6: FULL BOTTLE CONVEYOR SYSTEM INNOLINE BTR WITH AUTOMATIC LUBRICATION SYSTEM ITEM 7: LABELING MACHINE INNOKET ROLAND KH 20/5 II, CAPACITY 4000 - 32000 LABELS/H THIS ROLAND LABELERS HAS 20 BOTTLE TURRETS AND 2 LABELING STATIONS WITH 5-FINGER DRUMS FOR LABEL APPLICATION. PAPER LABELS, COLD GLUE SYSTEM. A FEEDSCREW SPACES THE CONTAINERS BEFORE THEY ARE CHANNELED INTO THE ROTATING MACHINE BY AN INFEED STAR. HOT GLUE IS EVENLY DISTRIBUTED, THIN FILM OF GLUE ON THE GLUING SEGMENTS PICKS UP LABELS FROM THE STATIONARY MAGAZINE. THE INDIVIDUALLY SPRING LOADED FINGERS OF THE GRIPPER DRUM GRASP THE GLUED LABELS AND APPLY THEM IN THE EXACT POSITION ON THE CONTAINERS. ITEM 8: LASER MARKING SYSTEM CODER ALLMARK AL 882 APS ITEM 9: LABEL INSPECTOR HEUFT BASIC BA R20 WITH X-RAY ITEM 10: LABELING MACHINE KRONES CONTIROL K-745-L17, YEAR 2006 PLASTIC LABELS, HOT GLUE SYSTEM, 2 ROLLS WITH AUTOMATIC SWITCH OVER CAPACITY 15 000 - 17 000 BPH WITH 2.5 LITER PER ITEM 11: TRAY SHRINK PACKER KHS TSP 35-700, YEAR 2007 CAPACITY UP TO 35 CYCLES PER MINUTE ITEM 12: TRAY CONVEYORS KHS INNOLINE GTR WITH AUTOMATIC LUBRICATION SYSTEM ITEM 13: LABEL INSERTER METEC ON DELIVERY PACKS ITEM 14: PALLETIZER KHS INNOPAL PB 1/2 N2 CAPACITY 27 000 BPH IN 1.5 LITER DOUBLE LINE PALLETIZER SUITABLE FOR 800X1000 AND 1000X1200 CM PALLETS PALLET MAGAZINE KHS MPH CARTON LAYER INSERTER ROBOT KHS PTR PALLET CONVEYORS KUKA / SIEMENS PLC CONTROLS ITEM 15: PALLET STRETCH WRAPPER ROBOPAC HELIX HS 40 SIEMENS SIMATIC S 7 PLC CONTOLS ITEM 16: PALLET LIFT KHS LORD PAC WITH A PALLET CODER
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1165 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1165 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: kuka
model: kr 100-2 ha
application type: robotics
machine type: robot
availability: immediately
construction year: 2009
production hours: 0
location: germany
origin country: germany


the cell consists of 3 kuka kr 100-2 ha with krc2 controller. two robots are equipped with arm extension. the tig welding robot has 2 additional axes for driving the tilt and turn table. the tilt and turn table has a capacity of approx. 1000 kg. the robots are equipped with kuka safe operation v2.1, motion cooperation 2.1 (the two on the linear axis) and touch sense 1.2. one of the two robots on the linear axis also has two additional axes for controlling the linear axis and the lathe chuck. the linear axis has a length of 8300 mm. due to a business change of the company the automation cell has never been used and comes with 0 production hours. the cell can also be customized according to your production needs.


additional equipment:

- one of the robots has a fixed precitec yw 52 f100/250 llk welding head with cross-jet. the welding head is equipped with a beam splitter module for connecting a kappa observation camera.

- the other two robots are equipped with schunk quick couplers swk210 and one with collision and overload protection opr 131 and can be equipped with various tools. 

- further technical data on request.
 OVERVIEW: BRAND: KUKA MODEL: KR 100-2 HA APPLICATION TYPE: ROBOTICS MACHINE TYPE: ROBOT AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2009 PRODUCTION HOURS: 0 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY THE CELL CONSISTS OF 3 KUKA KR 100-2 HA WITH KRC2 CONTROLLER. TWO ROBOTS ARE EQUIPPED WITH ARM EXTENSION. THE TIG WELDING ROBOT HAS 2 ADDITIONAL AXES FOR DRIVING THE TILT AND TURN TABLE. THE TILT AND TURN TABLE HAS A CAPACITY OF APPROX. 1000 KG. THE ROBOTS ARE EQUIPPED WITH KUKA SAFE OPERATION V2.1, MOTION COOPERATION 2.1 (THE TWO ON THE LINEAR AXIS) AND TOUCH SENSE 1.2. ONE OF THE TWO ROBOTS ON THE LINEAR AXIS ALSO HAS TWO ADDITIONAL AXES FOR CONTROLLING THE LINEAR AXIS AND THE LATHE CHUCK. THE LINEAR AXIS HAS A LENGTH OF 8300 MM. DUE TO A BUSINESS CHANGE OF THE COMPANY THE AUTOMATION CELL HAS NEVER BEEN USED AND COMES WITH 0 PRODUCTION HOURS. THE CELL CAN ALSO BE CUSTOMIZED ACCORDING TO YOUR PRODUCTION NEEDS. ADDITIONAL EQUIPMENT: - ONE OF THE ROBOTS HAS A FIXED PRECITEC YW 52 F100/250 LLK WELDING HEAD WITH CROSS-JET. THE WELDING HEAD IS EQUIPPED WITH A BEAM SPLITTER MODULE FOR CONNECTING A KAPPA OBSERVATION CAMERA. - THE OTHER TWO ROBOTS ARE EQUIPPED WITH SCHUNK QUICK COUPLERS SWK210 AND ONE WITH COLLISION AND OVERLOAD PROTECTION OPR 131 AND CAN BE EQUIPPED WITH VARIOUS TOOLS. - FURTHER TECHNICAL DATA ON REQUEST.
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1165 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1165 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-with kuka robots
year 2012
 WITH KUKA ROBOTS YEAR 2012
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1165 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1165 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Precio: 28.000 €
Ubicación: Land-
f 105   
1 khs robot palletizing plant with a
pallet plastic foil shrinking machine
int. no. a 11
manufacturer year is 2004
baujahr 2004		     	     
existing about:
- 1 empty pallet magazine
- 1 pallet roller transport conveyor , length 22,5 m
- 1 kuka robot palletizing plant with a grapple  tool
   for 2 x 4 cartons. one carton has 8 single packagings 
   with  1,0 ltr				                 	
- 1 a pre/arrangement in groups to have the right placing 
   for the grapple tool	     	     
- 1 carton flat spending plant to save the palled cartons 
   layer by layer 
- 1 carton proof plant fort he contours of the full pallets
- 1 pallet plastic foil shrinking pallets, manufacturer is robopak
- 1 transform plant for two ½ euro pallets on a normal euro pallet
- 1 logopak label printing and label spending machine
- 2 pallet corner transform machines

price up standing point:			28.000,00 euro


 F 105 1 KHS ROBOT PALLETIZING PLANT WITH A PALLET PLASTIC FOIL SHRINKING MACHINE INT. NO. A 11 MANUFACTURER YEAR IS 2004 BAUJAHR 2004 EXISTING ABOUT: - 1 EMPTY PALLET MAGAZINE - 1 PALLET ROLLER TRANSPORT CONVEYOR , LENGTH 22,5 M - 1 KUKA ROBOT PALLETIZING PLANT WITH A GRAPPLE TOOL FOR 2 X 4 CARTONS. ONE CARTON HAS 8 SINGLE PACKAGINGS WITH 1,0 LTR - 1 A PRE/ARRANGEMENT IN GROUPS TO HAVE THE RIGHT PLACING FOR THE GRAPPLE TOOL - 1 CARTON FLAT SPENDING PLANT TO SAVE THE PALLED CARTONS LAYER BY LAYER - 1 CARTON PROOF PLANT FORT HE CONTOURS OF THE FULL PALLETS - 1 PALLET PLASTIC FOIL SHRINKING PALLETS, MANUFACTURER IS ROBOPAK - 1 TRANSFORM PLANT FOR TWO ½ EURO PALLETS ON A NORMAL EURO PALLET - 1 LOGOPAK LABEL PRINTING AND LABEL SPENDING MACHINE - 2 PALLET CORNER TRANSFORM MACHINES PRICE UP STANDING POINT: 28.000,00 EURO
Vendedor: LM Dairy Consulting
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 3100 mm<br/>payload: 150 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1245 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 3100 MM
PAYLOAD: 150
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1245 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-kuka robot kr 180-2 pa for palletizing and depalletizing with hook for trays range: 3200 mm
load: 180 kg
weight: 1240 kg year of production: 2004
positioning accuracy is +/-0, 05 mm serial number: 940122

with control unit krc2
supply voltage: 575/480/400v
netzfreguenz: 50/60 hz
volllaststom: 15a
netzsischerung: 25a

kuka robot kr 180-2 pa for palletizing and depalletizing with gripper for trays
range of 3200 mm
carrying capacity: 180 kg
weight: 1240 kg
year of construction: 2004
positioning accuracy is +/-0.05mm
serial number: 940122
control unit krc2
connection voltage: 575/480 / 400v
power frequency: 50/60 hz
full load current: 15a
power supply: 25a
KUKA ROBOT KR 180-2 PA FOR PALLETIZING AND DEPALLETIZING WITH HOOK FOR TRAYS RANGE: 3200 MM LOAD: 180 KG WEIGHT: 1240 KG YEAR OF PRODUCTION: 2004 POSITIONING ACCURACY IS +/-0, 05 MM SERIAL NUMBER: 940122 WITH CONTROL UNIT KRC2 SUPPLY VOLTAGE: 575/480/400V NETZFREGUENZ: 50/60 HZ VOLLLASTSTOM: 15A NETZSISCHERUNG: 25A KUKA ROBOT KR 180-2 PA FOR PALLETIZING AND DEPALLETIZING WITH GRIPPER FOR TRAYS RANGE OF 3200 MM CARRYING CAPACITY: 180 KG WEIGHT: 1240 KG YEAR OF CONSTRUCTION: 2004 POSITIONING ACCURACY IS +/-0.05MM SERIAL NUMBER: 940122 CONTROL UNIT KRC2 CONNECTION VOLTAGE: 575/480 / 400V POWER FREQUENCY: 50/60 HZ FULL LOAD CURRENT: 15A POWER SUPPLY: 25A
Vendedor: 1&1 Pulspack
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>payload: 150 <br/>total power requirement:  kw<br/>weight of the machine ca.: 1165 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
PAYLOAD: 150
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1165 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-plant includes: (1) industrial robot kuka kr 150 l130-2 c 2000: number of axis: 6, rated payload: 130kg, additional load: 100kg, total load: 530kg max., range / speed: axis 1: +/-185° / 105°/s, axis 2: -146° / 110°/s, axis 3: -119° bis +155° / 95°/s, axis 4: +/-350° / 170°/s, axis 5: +/-125° / 170mm/s, axis 6: +/-350° / 238°/s, weight: 1,255t, year of construction: 2007 (2) industrial robot kuka kr 500-2 c: number of axis: 6, rated payload: 500kg, total load: 1t max., arm length: 2826mm, range / speed: axis:1 +/-185° / 69°/s, axis 2: -40° bis +110° / 69°/s, axis 3: -184° bis +60° / 69°/s, axis 4: +/-350° / 77°/s, axis 5: +/-118° / 76mm/s, axis 6: +/-350° / 120°/s, weight: 2,35t, year of construction: 2007, year of construction: 2007 (3) drum melter ico fs 20: output: 20-40kg/h, heating output: 4kw, length: 1200mm, width: 800mm, height: 1300-1600mm, weight: 400kg (4) hydraulic press vulkan (5) presses vulkan (6) cleaning cloth machine. PLANT INCLUDES: (1) INDUSTRIAL ROBOT KUKA KR 150 L130-2 C 2000: NUMBER OF AXIS: 6, RATED PAYLOAD: 130KG, ADDITIONAL LOAD: 100KG, TOTAL LOAD: 530KG MAX., RANGE / SPEED: AXIS 1: +/-185° / 105°/S, AXIS 2: -146° / 110°/S, AXIS 3: -119° BIS +155° / 95°/S, AXIS 4: +/-350° / 170°/S, AXIS 5: +/-125° / 170MM/S, AXIS 6: +/-350° / 238°/S, WEIGHT: 1,255T, YEAR OF CONSTRUCTION: 2007 (2) INDUSTRIAL ROBOT KUKA KR 500-2 C: NUMBER OF AXIS: 6, RATED PAYLOAD: 500KG, TOTAL LOAD: 1T MAX., ARM LENGTH: 2826MM, RANGE / SPEED: AXIS:1 +/-185° / 69°/S, AXIS 2: -40° BIS +110° / 69°/S, AXIS 3: -184° BIS +60° / 69°/S, AXIS 4: +/-350° / 77°/S, AXIS 5: +/-118° / 76MM/S, AXIS 6: +/-350° / 120°/S, WEIGHT: 2,35T, YEAR OF CONSTRUCTION: 2007, YEAR OF CONSTRUCTION: 2007 (3) DRUM MELTER ICO FS 20: OUTPUT: 20-40KG/H, HEATING OUTPUT: 4KW, LENGTH: 1200MM, WIDTH: 800MM, HEIGHT: 1300-1600MM, WEIGHT: 400KG (4) HYDRAULIC PRESS VULKAN (5) PRESSES VULKAN (6) CLEANING CLOTH MACHINE.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-number of controlled axis: 6 <br/>workpiece weight: 150 kg<br/>throat: 2700 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 1165 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: 6
WORKPIECE WEIGHT: 150 KG
THROAT: 2700 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1165 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-control fanuc series oi-tc
turning diameter 350 mm
turning diameter over bed 650 mm
turning length 300 mm
spindle speed 4000 1 / min
12-station turret
tailstock
chip conveyor

(identical 2nd machine with kuka robot connection available)

 CONTROL FANUC SERIES OI-TC TURNING DIAMETER 350 MM TURNING DIAMETER OVER BED 650 MM TURNING LENGTH 300 MM SPINDLE SPEED 4000 1 / MIN 12-STATION TURRET TAILSTOCK CHIP CONVEYOR (IDENTICAL 2ND MACHINE WITH KUKA ROBOT CONNECTION AVAILABLE)
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-number of controlled axis: unbkt. <br/>workpiece weight: unbkt. kg<br/>throat: unbkt. mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> NUMBER OF CONTROLLED AXIS: UNBKT.
WORKPIECE WEIGHT: UNBKT. KG
THROAT: UNBKT. MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: A-Z Maschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)