153 ofertas

Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make hosokawa alpine ag, type 100-upz, no c-2118593, new 2011, grinder cryogenic laboratory grinding line (1x), material stainless steel , rotor size dia. 100mm, with grinding track , with hopper , feeding with rotating valve wirbelschnecken-kühler d60x700, motor mill 1,5 kw 400 volt, with variable speed drive , mounted on frame , with switchgear , floorspace 2,0x2,0m, total height 2,4m, weight 690kgsize reduction millsgrinders > size reduction mills what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE HOSOKAWA ALPINE AG, TYPE 100-UPZ, NO C-2118593, NEW 2011, GRINDER CRYOGENIC LABORATORY GRINDING LINE (1X), MATERIAL STAINLESS STEEL , ROTOR SIZE DIA. 100MM, WITH GRINDING TRACK , WITH HOPPER , FEEDING WITH ROTATING VALVE WIRBELSCHNECKEN-KüHLER D60X700, MOTOR MILL 1,5 KW 400 VOLT, WITH VARIABLE SPEED DRIVE , MOUNTED ON FRAME , WITH SWITCHGEAR , FLOORSPACE 2,0X2,0M, TOTAL HEIGHT 2,4M, WEIGHT 690KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-designed to meet all metals analysis requirements form routine use to metals research, the arl 4460 is the solution for ultimate analytical performance in varying laboratory conditions or in hostile environments.
ultimate detection limits, reproducibility and accuracy
speed, accuracy, stability, reliability
widest range of metals analysis
capability to identify and count inclusions and to calculate cleanness indexes
the ultimate in performance for spark emission metals analysis to allow rapid, reliable quality control of metals.

the arl 4460 is quite simply the best system for metals analysis produced to date. two important new capabilities have been added to thermo scientific well established spectrometer chassis: the patented current controlled source (ccs), which allows a faster attack on the sample and therefore permits faster analysis times and improved precision of analysis, and the time resolved spectroscopy (trs) system, which permits clearer differentiation between useful analytical signals and background, therefore allowing better limits of detection to be achieved. together, these capabilities substantially improve the performance of the oe technique and allow faster analyses (well inside one minute) and improved detection limits for trace analysis.

even more recently, a new sparkdat capability has been made available as an option on the arl 4460. this allows information to be gathered from the individual sparks and permits off-line investigation of DESIGNED TO MEET ALL METALS ANALYSIS REQUIREMENTS FORM ROUTINE USE TO METALS RESEARCH, THE ARL 4460 IS THE SOLUTION FOR ULTIMATE ANALYTICAL PERFORMANCE IN VARYING LABORATORY CONDITIONS OR IN HOSTILE ENVIRONMENTS. ULTIMATE DETECTION LIMITS, REPRODUCIBILITY AND ACCURACY SPEED, ACCURACY, STABILITY, RELIABILITY WIDEST RANGE OF METALS ANALYSIS CAPABILITY TO IDENTIFY AND COUNT INCLUSIONS AND TO CALCULATE CLEANNESS INDEXES THE ULTIMATE IN PERFORMANCE FOR SPARK EMISSION METALS ANALYSIS TO ALLOW RAPID, RELIABLE QUALITY CONTROL OF METALS. THE ARL 4460 IS QUITE SIMPLY THE BEST SYSTEM FOR METALS ANALYSIS PRODUCED TO DATE. TWO IMPORTANT NEW CAPABILITIES HAVE BEEN ADDED TO THERMO SCIENTIFIC WELL ESTABLISHED SPECTROMETER CHASSIS: THE PATENTED CURRENT CONTROLLED SOURCE (CCS), WHICH ALLOWS A FASTER ATTACK ON THE SAMPLE AND THEREFORE PERMITS FASTER ANALYSIS TIMES AND IMPROVED PRECISION OF ANALYSIS, AND THE TIME RESOLVED SPECTROSCOPY (TRS) SYSTEM, WHICH PERMITS CLEARER DIFFERENTIATION BETWEEN USEFUL ANALYTICAL SIGNALS AND BACKGROUND, THEREFORE ALLOWING BETTER LIMITS OF DETECTION TO BE ACHIEVED. TOGETHER, THESE CAPABILITIES SUBSTANTIALLY IMPROVE THE PERFORMANCE OF THE OE TECHNIQUE AND ALLOW FASTER ANALYSES (WELL INSIDE ONE MINUTE) AND IMPROVED DETECTION LIMITS FOR TRACE ANALYSIS. EVEN MORE RECENTLY, A NEW SPARKDAT CAPABILITY HAS BEEN MADE AVAILABLE AS AN OPTION ON THE ARL 4460. THIS ALLOWS INFORMATION TO BE GATHERED FROM THE INDIVIDUAL SPARKS AND PERMITS OFF-LINE INVESTIGATION OF "INCLUSIONS" IN METALS. SPECIFICATIONS SPECTROMETER DESIGN ONE METER, PASCHEN-RUNGE VACUUM POLYCHROMATOR MADE OF CAST IRON AND TEMPERATURE CONTROLLED TO ± 0.1° AT 38° C. MAXIMUM 60 CHANNELS. FJNSD9MTY SAMPLE STAND WITH SELF CONTAINED, RECIRCULATING COOLANT SYSTEM. ARGON FLUSHED TABLE. GRATINGS SPECTROMETER IS PROVIDED WITH ONE OF THE FOLLOWING GRATINGS, APPROPRIATELY CHOICEED FOR THE ANALYTICAL TASK: 1080 GR/MM, 1667 GR/MM, 2160 GR/MM. RESOLUTION DEPENDENT ON GRATING, SECONDARY SLIT, AND SPECTRAL ORDER. SLIT WIDTHS PRIMARY SLIT: 20 µM; SECONDARY SLIT: 25, 37.5, 50, 75 µM. PHOTOMULTIPLIER TUBES ø 28 MM, 10-STAGE SIDE WINDOW TUBES, FUSED QUARTZ OR GLASS ENVELOPE. CURRENT CONTROLLED SOURCE (CCS) AND TIME RESOLVED SPECTROSCOPY (TRS) TO EXTEND THE RANGE OF ANALYSIS CAPABILITIES. SPECTROMETER CONTROL ARL MMB 386 MICROPROCESSOR UTILIZING CMOS TECHNOLOGY WITH STATUS MEASURING CARD. A/D CONVERTERS AND ATTENUATORS INCLUDED FOR EACH CHANNEL. EACH ATTENUATOR HAS 41 STEPS. UP TO 12 PROGRAMMABLE ATTENUATORS ARE AVAILABLE AS AN OPTION. THE DYNAMIC RANGE OF THE MEASURING ELECTRONICS IS PROPORTIONAL TO THE MEASURING TIME, TYPICALLY 2*106 COUNTS/SEC. ANALYSIS TIME TYPICALLY LESS THAN 45 SECONDS (FOR 2 SPARKS) DEPENDING ON SAMPLE TYPE. ENVIRONMENTAL REQUIREMENTS AMBIENT TEMPERATURE 16-30° C (59-86° F); MAXIMUM RATE OF CHANGE ± 5°C/HOUR; RELATIVE HUMIDITY: 20-80%. ELECTRICAL REQUIREMENTS VOLTAGE 230 V + 10% - 15%, SINGLE-PHASE WITH PROTECTIVE GROUND (5 KVA REGULATOR REQUIRED IF FLUCTUATIONS EXCEED ± 10%). CURRENT 12A, FREQUENCY 50 OR 60 HZ; POWER 2.5 KVA; GROUNDING < 1½. IN CONFORMITY TO EUROPEAN DIRECTIVES (89/392/EEC MACHINERY), (73/23/EEC LOW VOLTAGE MATERIAL), (89/336/EEC ELECTROMAGNETIC COMPATIBILITY). ARGON REQUIREMENTS 99.995% MAXIMUM 5 PPM OXYGEN (MAXIMUM 2 PPM OXYGEN FOR SAMPLES WITH HIGH SI CONTENT). OPTIONAL ARGON PURIFIER AVAILABLE AND RECOMMENDED FOR LOW CARBON ANALYSIS. FOR NITROGEN, ARGON PURIFIER INCLUDED. FLOW: 5 L/MIN. DURING ANALYSIS; 0,7 L/MIN. STAND-BY. ENCLOSURE BUILT-IN DUST PROTECTION WITH HIGH CAPACITY COOLING FANS. DIMENSIONS 1385 MM (55 IN.) WIDE EXCLUDING EXCITATION STAND. 1690 MM (67 IN.) WIDE INCLUDING EXCITATION STAND. 1220 MM (48 IN.) HIGH, 855 MM (34 IN.) DEEP. TOTAL SYSTEM WEIGHT 520 KG (1058 LB) APPROXIMATELY. ACCESSORIES AND OPTIONS HOLDERS/ADAPTERS FOR SMALL AND PIN SAMPLES. CASTING MOLDS FOR FERROUS AND NON-FERROUS METALS. SAMPLE PREPARATION MACHINES FOR FERROUS AND NON-FERROUS METALS. ARGON PURIFICATION SYSTEMS. GAS DISTRIBUTION SYSTEM FOR BOTTLED ARGON. VOLTAGE STABILIZATION SYSTEMS. WINDOW MOUNTED LABORATORY AIR-CONDITIONERS.
Vendedor: Truck Outlet LTD
Año de construcción: usado
Ubicación: Land-make alpine augsburg, type 160-upz, no 5151.1, new 1988, grinder cryogenic laboratory grinding line (1x), pin disc mill /plate beater, material stainless steel , rotor size dia. 160 mm, feeding with vibro feeder en messer griesheim wirbelschnecken-kühler d60x700, motor mill 7,5/9,0 kw 380-420/440-480 volt, mounted on frame with filter and ventilator, with switchgear , floorspace 2,5x1,5m, total height 2,7m, weight 1000kgsize reduction millsgrinders > size reduction mills what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE ALPINE AUGSBURG, TYPE 160-UPZ, NO 5151.1, NEW 1988, GRINDER CRYOGENIC LABORATORY GRINDING LINE (1X), PIN DISC MILL /PLATE BEATER, MATERIAL STAINLESS STEEL , ROTOR SIZE DIA. 160 MM, FEEDING WITH VIBRO FEEDER EN MESSER GRIESHEIM WIRBELSCHNECKEN-KüHLER D60X700, MOTOR MILL 7,5/9,0 KW 380-420/440-480 VOLT, MOUNTED ON FRAME WITH FILTER AND VENTILATOR, WITH SWITCHGEAR , FLOORSPACE 2,5X1,5M, TOTAL HEIGHT 2,7M, WEIGHT 1000KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-injection molding plant with two husky hypet 300 for preform production 
 
this is complete pet preform production plant made by husky in year 2008. it includes two husky hypet 300 hpp injection molding machines with granulate silos, dryers and chillers and four sets of different tools for preforms. plant is installed and can be seen in operation. 
 
main characteristics of this plant 
•	two husky hypet 300 p100/110 e 120 hpp injection molding machine with 72 cavity molds 
•	two x 230 m3 aluminum resin silos with weights 
•	big bag emptying station 
•	two luxor 2400 pet resin dryers with silos, dry product hopper and conveying systems 
•	grinding mill for disqualified pet preforms and bottles 
•	gravimetric dosing and mixing unit gravicolor 1000r-3/0 for original and pet wastes 
•	dosing device minicolor g2 pet color volumetric dosing and missing unit  
•	water chiller with semi-hermetic screw compressor for cooling the tools (one for two machines) 
•	two two-sided preform filling systems for carton and lattice boxes
•	air cooled water cooler for 2 x hypet 300 machine cooling 
•	water softener for cooling system 
•	air compressor atlas-copco ga vsd 37 for two hypet machines 
•	laboratory equipment 
•	bridge crane 6.3 tons, span 12.5 meters 
 
the following hypet tools, one set for both machines 
• 0.33 liter wide neck 38mm 2-starter 16.5 grams
• 1.00 liter wide neck 38 mm 2-starter 28.5 grams
• 0.5 liter 28 mm with 15.4 grams of pco 1810
• 1.5 liters 28 mm with 31.3 grams pco 1810
 
video: abcs://youtu.be/sdzxif_hbz0 

 INJECTION MOLDING PLANT WITH TWO HUSKY HYPET 300 FOR PREFORM PRODUCTION THIS IS COMPLETE PET PREFORM PRODUCTION PLANT MADE BY HUSKY IN YEAR 2008. IT INCLUDES TWO HUSKY HYPET 300 HPP INJECTION MOLDING MACHINES WITH GRANULATE SILOS, DRYERS AND CHILLERS AND FOUR SETS OF DIFFERENT TOOLS FOR PREFORMS. PLANT IS INSTALLED AND CAN BE SEEN IN OPERATION. MAIN CHARACTERISTICS OF THIS PLANT • TWO HUSKY HYPET 300 P100/110 E 120 HPP INJECTION MOLDING MACHINE WITH 72 CAVITY MOLDS • TWO X 230 M3 ALUMINUM RESIN SILOS WITH WEIGHTS • BIG BAG EMPTYING STATION • TWO LUXOR 2400 PET RESIN DRYERS WITH SILOS, DRY PRODUCT HOPPER AND CONVEYING SYSTEMS • GRINDING MILL FOR DISQUALIFIED PET PREFORMS AND BOTTLES • GRAVIMETRIC DOSING AND MIXING UNIT GRAVICOLOR 1000R-3/0 FOR ORIGINAL AND PET WASTES • DOSING DEVICE MINICOLOR G2 PET COLOR VOLUMETRIC DOSING AND MISSING UNIT • WATER CHILLER WITH SEMI-HERMETIC SCREW COMPRESSOR FOR COOLING THE TOOLS (ONE FOR TWO MACHINES) • TWO TWO-SIDED PREFORM FILLING SYSTEMS FOR CARTON AND LATTICE BOXES • AIR COOLED WATER COOLER FOR 2 X HYPET 300 MACHINE COOLING • WATER SOFTENER FOR COOLING SYSTEM • AIR COMPRESSOR ATLAS-COPCO GA VSD 37 FOR TWO HYPET MACHINES • LABORATORY EQUIPMENT • BRIDGE CRANE 6.3 TONS, SPAN 12.5 METERS THE FOLLOWING HYPET TOOLS, ONE SET FOR BOTH MACHINES • 0.33 LITER WIDE NECK 38MM 2-STARTER 16.5 GRAMS • 1.00 LITER WIDE NECK 38 MM 2-STARTER 28.5 GRAMS • 0.5 LITER 28 MM WITH 15.4 GRAMS OF PCO 1810 • 1.5 LITERS 28 MM WITH 31.3 GRAMS PCO 1810 VIDEO: ABCS://YOUTU.BE/SDZXIF_HBZ0
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make vector corporation iowa usa, type ldcs-20/30 hi-coater, no 43994 / hct-217, new 1994, with 2 coating drums, coating installation (1x), material stainless steel , laboratory development coating system, batch size 1,3/3,75 ltr, pan diameter 290/360mm, pan depth 100/120mm, motor 0,07 kw, 90 volt (dc motor), with variable speed drive , with electric heating (3000 watt), with fan make eg&g rotron, type dr404al72m, motor 0,75 kw, 200-240/38-415 volt, with air filter , without spraying arm and without peristaltic pump, mounted on frame , mounted on wheels , with switch , floorspace 1,0x0,9 m, total height 1,5 m, weight 330 kgcoating panscoating pans > coating pans what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE VECTOR CORPORATION IOWA USA, TYPE LDCS-20/30 HI-COATER, NO 43994 / HCT-217, NEW 1994, WITH 2 COATING DRUMS, COATING INSTALLATION (1X), MATERIAL STAINLESS STEEL , LABORATORY DEVELOPMENT COATING SYSTEM, BATCH SIZE 1,3/3,75 LTR, PAN DIAMETER 290/360MM, PAN DEPTH 100/120MM, MOTOR 0,07 KW, 90 VOLT (DC MOTOR), WITH VARIABLE SPEED DRIVE , WITH ELECTRIC HEATING (3000 WATT), WITH FAN MAKE EG&G ROTRON, TYPE DR404AL72M, MOTOR 0,75 KW, 200-240/38-415 VOLT, WITH AIR FILTER , WITHOUT SPRAYING ARM AND WITHOUT PERISTALTIC PUMP, MOUNTED ON FRAME , MOUNTED ON WHEELS , WITH SWITCH , FLOORSPACE 1,0X0,9 M, TOTAL HEIGHT 1,5 M, WEIGHT 330 KGCOATING PANSCOATING PANS > COATING PANS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-laboratory mixer type:
ekato unimix lm6

 LABORATORY MIXER TYPE: EKATO UNIMIX LM6
Vendedor: Biovesta
Año de construcción: usado
Ubicación: Land-make matra, laboratory press (1x), stroke 160mm, platen sizes 240x180mm, daylight 160mm, between the sides of the frame 300mm, electric heated platens , with hydraulic unit , manual operated pump , number of temp. controllers 2, with switchgear , floorspace 0,9x0,8 m, total height 2,2 mlaboratory pressespresses > laboratory presses what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE MATRA, LABORATORY PRESS (1X), STROKE 160MM, PLATEN SIZES 240X180MM, DAYLIGHT 160MM, BETWEEN THE SIDES OF THE FRAME 300MM, ELECTRIC HEATED PLATENS , WITH HYDRAULIC UNIT , MANUAL OPERATED PUMP , NUMBER OF TEMP. CONTROLLERS 2, WITH SWITCHGEAR , FLOORSPACE 0,9X0,8 M, TOTAL HEIGHT 2,2 MLABORATORY PRESSESPRESSES > LABORATORY PRESSES WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-vacuum homogenizing system, make becomix

type rw 2.5

mobile table version with anchor stirrer, vacuum pump, steering, etc.
utility room:
operating temperature 100 â° c.
pressure-1 / + 1 bar, vacuum
content 5 litres
boiler room:
operating temperature 110 â° c
pressure 4 bar
4.8 kw
contents 2 litres VACUUM HOMOGENIZING SYSTEM, MAKE BECOMIX TYPE RW 2.5 MOBILE TABLE VERSION WITH ANCHOR STIRRER, VACUUM PUMP, STEERING, ETC. UTILITY ROOM: OPERATING TEMPERATURE 100 &ACIRC;&DEG; C. PRESSURE-1 / + 1 BAR, VACUUM CONTENT 5 LITRES BOILER ROOM: OPERATING TEMPERATURE 110 &ACIRC;&DEG; C PRESSURE 4 BAR 4.8 KW CONTENTS 2 LITRES
Vendedor: Remontag
Año de construcción: usado
Ubicación: Land-make the mickle laboratory engineering co., no 089-81, with cover , motor (220 volt, 1 ph), with switch , floorspace 0,5x0,5 m, total height 0,6 m, weight 60 kgkneaderskneaders > kneaders what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE THE MICKLE LABORATORY ENGINEERING CO., NO 089-81, WITH COVER , MOTOR (220 VOLT, 1 PH), WITH SWITCH , FLOORSPACE 0,5X0,5 M, TOTAL HEIGHT 0,6 M, WEIGHT 60 KGKNEADERSKNEADERS > KNEADERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-complete used  ice cream plant  & ice cream line

ice cream cups , capacity per hour
200cs/hr
ice cream cones, capacity per hour
250cs/hr 
ice cream stick line capacity per hour ?
300cs/hr crunch


production equipment

•           ice-cream freezers – tetra pak hoyer 'kf 1000 n. 1997, tetra pak hoyer 'kf
•           1150 n' 1997 and hoyer 'kf 1150xc'
•           ice-cream stick line (6 lanes) - simampolo, year: 2012
•           ice cream bulk filling machine - omari 2014
•           cup & cone filling machine (2 lanes) - gp  2003
•           ice-cream cup filling machine
•           hardening tunnel
•           ice cream flavor swirler
•           metal detector -loma 'iq2', loma 'iq3'1998
•           drum mobile stainless steel mixer
•           (2) tape dispensers - better packages, '333'
•           heat exchanger & pump -apv
laboratory equipment
•           water bath -memmert 'wb14'
•           viscometer -brookfield 'dv1+'
•           hand refractometers –atago.
•           refractometer - atago 'pr301' COMPLETE USED ICE CREAM PLANT & ICE CREAM LINE ICE CREAM CUPS , CAPACITY PER HOUR 200CS/HR ICE CREAM CONES, CAPACITY PER HOUR 250CS/HR ICE CREAM STICK LINE CAPACITY PER HOUR ? 300CS/HR CRUNCH PRODUCTION EQUIPMENT • ICE-CREAM FREEZERS – TETRA PAK HOYER 'KF 1000 N. 1997, TETRA PAK HOYER 'KF • 1150 N' 1997 AND HOYER 'KF 1150XC' • ICE-CREAM STICK LINE (6 LANES) - SIMAMPOLO, YEAR: 2012 • ICE CREAM BULK FILLING MACHINE - OMARI 2014 • CUP & CONE FILLING MACHINE (2 LANES) - GP 2003 • ICE-CREAM CUP FILLING MACHINE • HARDENING TUNNEL • ICE CREAM FLAVOR SWIRLER • METAL DETECTOR -LOMA 'IQ2', LOMA 'IQ3'1998 • DRUM MOBILE STAINLESS STEEL MIXER • (2) TAPE DISPENSERS - BETTER PACKAGES, '333' • HEAT EXCHANGER & PUMP -APV LABORATORY EQUIPMENT • WATER BATH -MEMMERT 'WB14' • VISCOMETER -BROOKFIELD 'DV1+' • HAND REFRACTOMETERS –ATAGO. • REFRACTOMETER - ATAGO 'PR301' "PALETTE" • GLASS HUMIDIFIERS. • FUME HOOD -SAFELAB AND LABCRAFT 'AIR XIS BRIS SAC' • EYE-WASH & SHOWER STATION • STAINLESS STEEL LABORATORY OVEN -MEMMERT 'INB 500' AND MEMMERT 'UNB 500' CONVEYORS • INCLINED BELT CONVEYORS • BELT CONVEYORS • ROLLER CONVEYOR AND GRAVITY-TYPE ROLLER CONVEYORS TANKS • STAINLESS STEEL ELEVATED MIXING TANK - APV • STAINLESS STEEL HOT WATER TANK • (2) HORIZONTAL ST STEEL PALM OIL TANK - 1000MM DIA X 1500MM LONG AND 1000MM DIA X 1500MM • PALM OIL MIXING TANK - 1800MM DIA X 1500MM HIGH • STAINLESS STEEL DE-CHLORINISED WATER TANK - 1800MM X 1600MM • STAINLESS STEEL JACKETED HOT WATER TANK - 1800MM DIA X 1600MM • STAINLESS STEEL HYDRATION TANKS - 1500MM DIA X 1400MM HIGH • CONDENSATE RETURN TANK - 1600MM DIA X 1400MM PLANT SUPPORT EQUIPMENT • COOLING TOWER • CHILLED WATER HEAT EXCHANGER - ALFA LAVAL 'M10 BWFG' • EVAPORATIVE CONDENSERS -EVAPCO AND DESCA 'CFRC 042' • DEMOUNTABLE CHILLER ROOM • (2) STEEL LOADING DOCKS - 2250MM X 2400MM • INFLATABLE DOCK SHELTER • (2) CHILLERS - INSUFLEX • AIR HANDLING UNIT - TRANE 'DWAA 1008 HA 4 A' WAREHOUSING • BOLTLESS STEEL RACKING • PALLET TRUCK & PLATFORM TROLLEY –EUROLIFTER PLEASE ASK FOR MORE PICTURES FOR FACTORY/ WE TRANSFER AND EQUIPMENT LIST DOCUMENTS ICE-CREAM STICK LINE (6 LANES) - SIMAMPOLO, YEAR:2012, C/W LAIF WRAPPER; JAMIE INK JET PRINTER; CARTON SEALING M/C MODEL EXC 103 SD; BELT CONVEYOR ; OPERATOR PLATFORM PHOTOS ARE ATTACHED
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-make brabender, type 813301, no 177502, material stainless steel , jacket , with top ram, test pressure , with top ram, capacity ± 0,5 ltr., double shaft kneader laboratory (1x), single geared , electric capacity 25 amp, 380 volt, mounted on frame , mounted on wheels , with switchgear (plasti-corder), floorspace 1,7x0,9 m, total height 2,0 mkneaderskneaders > kneaders what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE BRABENDER, TYPE 813301, NO 177502, MATERIAL STAINLESS STEEL , JACKET , WITH TOP RAM, TEST PRESSURE , WITH TOP RAM, CAPACITY ± 0,5 LTR., DOUBLE SHAFT KNEADER LABORATORY (1X), SINGLE GEARED , ELECTRIC CAPACITY 25 AMP, 380 VOLT, MOUNTED ON FRAME , MOUNTED ON WHEELS , WITH SWITCHGEAR (PLASTI-CORDER), FLOORSPACE 1,7X0,9 M, TOTAL HEIGHT 2,0 MKNEADERSKNEADERS > KNEADERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 4.999 €
Ubicación: Land-we sell a stone press for laboratory purposes. the press is in the very good clean condition. the press is however without control and without cooling unit. stones can be pushed down with the stone press (breaking load tested). the machine is vorfã¼hrbar on a tour. also she has been tested every year! WE SELL A STONE PRESS FOR LABORATORY PURPOSES. THE PRESS IS IN THE VERY GOOD CLEAN CONDITION. THE PRESS IS HOWEVER WITHOUT CONTROL AND WITHOUT COOLING UNIT. STONES CAN BE PUSHED DOWN WITH THE STONE PRESS (BREAKING LOAD TESTED). THE MACHINE IS VORF&ATILDE;&FRAC14;HRBAR ON A TOUR. ALSO SHE HAS BEEN TESTED EVERY YEAR!
Vendedor: Veit Dennert KG
Año de construcción: usado
Ubicación: Land-make kendro laboratory products hanau, type heraeus vacutherm vt-6060 m, no 40224336, new unknown, vacuum drying oven (1x), material stainless steel , max. temperature 200 degr. c., number of compartments: 1, capacity ± 50 ltr, internal width 400mm, internal depth 350mm, internal height 340mm, electric heating , electric capacity 1,7 kw, 230 volt (1 ph), number of doors: 1, working pressure vacuum, with switch , floorspace 0,8x0,7 m, total height 0,6 m, weight 100 kgdrying ovensdryers > drying ovens what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE KENDRO LABORATORY PRODUCTS HANAU, TYPE HERAEUS VACUTHERM VT-6060 M, NO 40224336, NEW UNKNOWN, VACUUM DRYING OVEN (1X), MATERIAL STAINLESS STEEL , MAX. TEMPERATURE 200 DEGR. C., NUMBER OF COMPARTMENTS: 1, CAPACITY ± 50 LTR, INTERNAL WIDTH 400MM, INTERNAL DEPTH 350MM, INTERNAL HEIGHT 340MM, ELECTRIC HEATING , ELECTRIC CAPACITY 1,7 KW, 230 VOLT (1 PH), NUMBER OF DOORS: 1, WORKING PRESSURE VACUUM, WITH SWITCH , FLOORSPACE 0,8X0,7 M, TOTAL HEIGHT 0,6 M, WEIGHT 100 KGDRYING OVENSDRYERS > DRYING OVENS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-m
machine type lathe - cycle make padovani controlled type laboratory e 200 x 1500 year 1994 control type cnc storage france country of origin italy delivery immediately cargo base stock p
technical details

turning diameter 400 mm turning length 1500 mm control siemens 805 t tip height 200 mm spindle bore 51 mm turning diameter over the cross slide 245 mm speed range - continuously variable 0-3000 rpm tool holder multifix total power requirement 12 kw machine weight approx. 2 t 
 
additional information

in condition
 control siemens 805 cnc  M MACHINE TYPE LATHE - CYCLE MAKE PADOVANI CONTROLLED TYPE LABORATORY E 200 X 1500 YEAR 1994 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN ITALY DELIVERY IMMEDIATELY CARGO BASE STOCK P TECHNICAL DETAILS TURNING DIAMETER 400 MM TURNING LENGTH 1500 MM CONTROL SIEMENS 805 T TIP HEIGHT 200 MM SPINDLE BORE 51 MM TURNING DIAMETER OVER THE CROSS SLIDE 245 MM SPEED RANGE - CONTINUOUSLY VARIABLE 0-3000 RPM TOOL HOLDER MULTIFIX TOTAL POWER REQUIREMENT 12 KW MACHINE WEIGHT APPROX. 2 T ADDITIONAL INFORMATION IN CONDITION CONTROL SIEMENS 805 CNC
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-make mondomix holland b.v., type a-05 mini compact + md 2.1 + mtm 369, no project 12351 / d 9100701.7/9013110.17, new 1991, foam mixer laboratory aerator (1x), material stainless steel , rotor/stator with pins , rotor sizes dia. 80x120mm, with jacket , with frequency controller , capacity 5-45 kg/hr, with pump , mounted on wheels , with switchgear , floorspace 1,8x1,0 m, total height 1,6 m, weight 400 kg, - with chiller and heater unitfoam mixersmixers > foam mixers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE MONDOMIX HOLLAND B.V., TYPE A-05 MINI COMPACT + MD 2.1 + MTM 369, NO PROJECT 12351 / D 9100701.7/9013110.17, NEW 1991, FOAM MIXER LABORATORY AERATOR (1X), MATERIAL STAINLESS STEEL , ROTOR/STATOR WITH PINS , ROTOR SIZES DIA. 80X120MM, WITH JACKET , WITH FREQUENCY CONTROLLER , CAPACITY 5-45 KG/HR, WITH PUMP , MOUNTED ON WHEELS , WITH SWITCHGEAR , FLOORSPACE 1,8X1,0 M, TOTAL HEIGHT 1,6 M, WEIGHT 400 KG, - WITH CHILLER AND HEATER UNITFOAM MIXERSMIXERS > FOAM MIXERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 200 €
Ubicación: Land-manufacturer: laboratory technique barkey.
approved for warming plasma/blood, for continuous operation.
dimensions: approx. 5300x300x300mm.
elek. voltage: 220v.
condition: good!

ps: visit us 2hand4saã¶e.de for more medical devices!
greetings MANUFACTURER: LABORATORY TECHNIQUE BARKEY. APPROVED FOR WARMING PLASMA/BLOOD, FOR CONTINUOUS OPERATION. DIMENSIONS: APPROX. 5300X300X300MM. ELEK. VOLTAGE: 220V. CONDITION: GOOD! PS: VISIT US 2HAND4SA&ATILDE;&PARA;E.DE FOR MORE MEDICAL DEVICES! GREETINGS
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-make büchi, type b-811, no 403652036680001, new unknown, destillation installation laboratory extraction system (1x), number of columns: 4, material glass , electric heated , solvent cups are missing, with condensor , material glass , with switch , floorspace 0,7x0,3 m, total height 0,8 mdistillationdistillation > distillation what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE BüCHI, TYPE B-811, NO 403652036680001, NEW UNKNOWN, DESTILLATION INSTALLATION LABORATORY EXTRACTION SYSTEM (1X), NUMBER OF COLUMNS: 4, MATERIAL GLASS , ELECTRIC HEATED , SOLVENT CUPS ARE MISSING, WITH CONDENSOR , MATERIAL GLASS , WITH SWITCH , FLOORSPACE 0,7X0,3 M, TOTAL HEIGHT 0,8 MDISTILLATIONDISTILLATION > DISTILLATION WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 2.990 €
Ubicación: Land-agitator, laboratory mixer, minibatch dissolver 20vh, diaf pilvad - used
manufacturer: diaf pilvad denmark
type: 20vh
for premixing, dispersing and final mixing of batches up to approx. 15 liters. the speed of the dissolver shaft can be continuously adjusted during operation and read on a scale. the dissolver is equipped with a hydraulic lifting and lowering device, which is operated with a hand pump and located on the side of the machine with a lifting height of about 350 mm. the standard motor is in explosion-proof version eex e ii t3.
 
advantages
- good homogenization and dispersion with low power consumption
- engine 1.35 kw
- very stable construction
- incl. stable support table for pleasant work
- manual hydraulic lifting and lowering device
- lifting height 350 mm
- easy to change the stirring shaft with stirring unit without any use of tools
- stepless speed control with speed display
- max. container volume: 20 liters gross
- container fixing device for containers Ø 100-250 mm
- explosion-proof version eex e ii t3
- vacuum equipment optionally available
 
dimensions:
table 80 x 80 x 50 cm high
machine 67 x 50 x 120cm high
weight: 113 kg
 
condition: used
year of construction 2008, the machine is in very good condition
 
(the current new price is € 10,760 excl. vat)
the selling price is € 2.990 excl. vat. AGITATOR, LABORATORY MIXER, MINIBATCH DISSOLVER 20VH, DIAF PILVAD - USED MANUFACTURER: DIAF PILVAD DENMARK TYPE: 20VH FOR PREMIXING, DISPERSING AND FINAL MIXING OF BATCHES UP TO APPROX. 15 LITERS. THE SPEED OF THE DISSOLVER SHAFT CAN BE CONTINUOUSLY ADJUSTED DURING OPERATION AND READ ON A SCALE. THE DISSOLVER IS EQUIPPED WITH A HYDRAULIC LIFTING AND LOWERING DEVICE, WHICH IS OPERATED WITH A HAND PUMP AND LOCATED ON THE SIDE OF THE MACHINE WITH A LIFTING HEIGHT OF ABOUT 350 MM. THE STANDARD MOTOR IS IN EXPLOSION-PROOF VERSION EEX E II T3. ADVANTAGES - GOOD HOMOGENIZATION AND DISPERSION WITH LOW POWER CONSUMPTION - ENGINE 1.35 KW - VERY STABLE CONSTRUCTION - INCL. STABLE SUPPORT TABLE FOR PLEASANT WORK - MANUAL HYDRAULIC LIFTING AND LOWERING DEVICE - LIFTING HEIGHT 350 MM - EASY TO CHANGE THE STIRRING SHAFT WITH STIRRING UNIT WITHOUT ANY USE OF TOOLS - STEPLESS SPEED CONTROL WITH SPEED DISPLAY - MAX. CONTAINER VOLUME: 20 LITERS GROSS - CONTAINER FIXING DEVICE FOR CONTAINERS Ø 100-250 MM - EXPLOSION-PROOF VERSION EEX E II T3 - VACUUM EQUIPMENT OPTIONALLY AVAILABLE DIMENSIONS: TABLE 80 X 80 X 50 CM HIGH MACHINE 67 X 50 X 120CM HIGH WEIGHT: 113 KG CONDITION: USED YEAR OF CONSTRUCTION 2008, THE MACHINE IS IN VERY GOOD CONDITION (THE CURRENT NEW PRICE IS € 10,760 EXCL. VAT) THE SELLING PRICE IS € 2.990 EXCL. VAT.
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-make unknown (manufacturer tag is missing), laboratory press (1x), platen sizes 200x160mm, electric heated platens , with switch , floorspace 0,7x0,6 m, total height 0,9 m, weight 70 kg, pneumatical laboratory pressespresses > laboratory presses what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE UNKNOWN (MANUFACTURER TAG IS MISSING), LABORATORY PRESS (1X), PLATEN SIZES 200X160MM, ELECTRIC HEATED PLATENS , WITH SWITCH , FLOORSPACE 0,7X0,6 M, TOTAL HEIGHT 0,9 M, WEIGHT 70 KG, PNEUMATICAL LABORATORY PRESSESPRESSES > LABORATORY PRESSES WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stephan universal machine
for mixing, cutting, emulsifying, etc.
for the production of high-quality laboratory samples etc.
type: um 12
manufacturer: stephan machinery, germany
bowl capacity: 12 litres
charge: 2... 8 litre
work tools:  knife with 2 blades
bowl and working tool stainless steel
cover with stirring blades; plastic transparent
working temperature:max.  95 c
motor: 380 v / 1.5 / 1.9 kw / 1.400 / 2.800 rpm 
accessories: emulsifying tool, knives, user manual etc.
dimensions: 0,6 x 0,4 x 0,6 m
weight: 50 kg
technical condition: in new condition    STEPHAN UNIVERSAL MACHINE FOR MIXING, CUTTING, EMULSIFYING, ETC. FOR THE PRODUCTION OF HIGH-QUALITY LABORATORY SAMPLES ETC. TYPE: UM 12 MANUFACTURER: STEPHAN MACHINERY, GERMANY BOWL CAPACITY: 12 LITRES CHARGE: 2... 8 LITRE WORK TOOLS: KNIFE WITH 2 BLADES BOWL AND WORKING TOOL STAINLESS STEEL COVER WITH STIRRING BLADES; PLASTIC TRANSPARENT WORKING TEMPERATURE:MAX. 95 C MOTOR: 380 V / 1.5 / 1.9 KW / 1.400 / 2.800 RPM ACCESSORIES: EMULSIFYING TOOL, KNIVES, USER MANUAL ETC. DIMENSIONS: 0,6 X 0,4 X 0,6 M WEIGHT: 50 KG TECHNICAL CONDITION: IN NEW CONDITION
Vendedor: MLT GmbH Dresden
Año de construcción: usado
Ubicación: Land-make rene moritz, type 10d, no 16317, new unknown, vessel tiltable, mixer laboratory turbo cleaver and powder mixer1x, material stainless steel , vessel dia. 240x300mm (conical), jacketed, capacity 10 ltr, with switch, - motor 0,5/1,0/1,5/3,0 kw, 380 volt (500/1000/1500/3000 rpm - dim. 0,8x0,5 m, height 1,5 m, weight 210 kgmiscellaneous mixersmiscellaneous > miscellaneous mixers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE RENE MORITZ, TYPE 10D, NO 16317, NEW UNKNOWN, VESSEL TILTABLE, MIXER LABORATORY TURBO CLEAVER AND POWDER MIXER1X, MATERIAL STAINLESS STEEL , VESSEL DIA. 240X300MM (CONICAL), JACKETED, CAPACITY 10 LTR, WITH SWITCH, - MOTOR 0,5/1,0/1,5/3,0 KW, 380 VOLT (500/1000/1500/3000 RPM - DIM. 0,8X0,5 M, HEIGHT 1,5 M, WEIGHT 210 KGMISCELLANEOUS MIXERSMISCELLANEOUS > MISCELLANEOUS MIXERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-stephan universal machine
for mixing, cutting, emulsifying, thermal treatment , working under vacuum etc.
for manufacture of confictionary, milk, deli, cosmetics and pharmaceutical products and high-quality laboratory samples 
type: umc 12
manufacturer: stephan machinery, germany
mach. nr: 719.908.01
bowl capacity: 12 litres
charge: 2... 8 litre
work tools: use knife with 2 blades
bowl and working tool stainless steel
stainless steel lid with sight glasses
motor: 1.5 / 1.9 kw / 1.400 / 2.800 rpm 
stainless steel lid with stirring blades; plastic transparent
double jacket for heating and cooling
working temperature: 95 c
temperature sensor connection
digital temperature display
vacuum equipment with vacuum connection and vacuum pump
accessories: emulsifying tool, blades, user manual etc.
electr. connection: 380 v, 50 hz
dimensions: 0,6 x 0,4 x 0,6 m
weight: about 60 kg
technical condition: used, revised in excellent operating condition
                           STEPHAN UNIVERSAL MACHINE FOR MIXING, CUTTING, EMULSIFYING, THERMAL TREATMENT , WORKING UNDER VACUUM ETC. FOR MANUFACTURE OF CONFICTIONARY, MILK, DELI, COSMETICS AND PHARMACEUTICAL PRODUCTS AND HIGH-QUALITY LABORATORY SAMPLES TYPE: UMC 12 MANUFACTURER: STEPHAN MACHINERY, GERMANY MACH. NR: 719.908.01 BOWL CAPACITY: 12 LITRES CHARGE: 2... 8 LITRE WORK TOOLS: USE KNIFE WITH 2 BLADES BOWL AND WORKING TOOL STAINLESS STEEL STAINLESS STEEL LID WITH SIGHT GLASSES MOTOR: 1.5 / 1.9 KW / 1.400 / 2.800 RPM STAINLESS STEEL LID WITH STIRRING BLADES; PLASTIC TRANSPARENT DOUBLE JACKET FOR HEATING AND COOLING WORKING TEMPERATURE: 95 C TEMPERATURE SENSOR CONNECTION DIGITAL TEMPERATURE DISPLAY VACUUM EQUIPMENT WITH VACUUM CONNECTION AND VACUUM PUMP ACCESSORIES: EMULSIFYING TOOL, BLADES, USER MANUAL ETC. ELECTR. CONNECTION: 380 V, 50 HZ DIMENSIONS: 0,6 X 0,4 X 0,6 M WEIGHT: ABOUT 60 KG TECHNICAL CONDITION: USED, REVISED IN EXCELLENT OPERATING CONDITION
Vendedor: MLT GmbH Dresden
Año de construcción: usado
Ubicación: Land-reactor (1x), material stainless steel , capacity 1 ltr., vessel sizes 100x160 mm, outlet 10 mm, with jacket , motor 0,37 kw, 220/380 volt, with switch , floorspace 0.6x0.3 m, total height 0.5 m, 1 laboratory ribbon blender/reactor, inlet 20 mm, vertical mixing shaft with ribbon, variable speed, built on frame.reactorsreactors > reactors what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! REACTOR (1X), MATERIAL STAINLESS STEEL , CAPACITY 1 LTR., VESSEL SIZES 100X160 MM, OUTLET 10 MM, WITH JACKET , MOTOR 0,37 KW, 220/380 VOLT, WITH SWITCH , FLOORSPACE 0.6X0.3 M, TOTAL HEIGHT 0.5 M, 1 LABORATORY RIBBON BLENDER/REACTOR, INLET 20 MM, VERTICAL MIXING SHAFT WITH RIBBON, VARIABLE SPEED, BUILT ON FRAME.REACTORSREACTORS > REACTORS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-laminarflow, stainless sterile workbench, cleanroom air hood, laminar flo box - second-hand
manufacturer: helmut seier gmbh,

the laminar flow box has been tested and measured by a laboratory equipment company, the filter of the system is completely in order and fully functional.

the plant consists of:
- the laminar flow box, which is placed on the workbench
- clean room air filter
- 2 fischbach fans
- electrical circuit and protection
- infinitely variable speed control of the fans
- including lighting for the workplace
- workbench with stainless work surface and stainless wall

technical specifications:
- laminar flow box made of steel sheet metal
- filter class h14
- cleanroom class ii
- volume flow 2 x 0-3595 m³ / h
- p 0.86 kw, 230 volts, 0-1390 u / min
- 0.4m / s air outlet speed
- filter surface = cleanroom work surface: 245 x 60cm

dimensions laminar flow box: l = 255, t = 70, h = 90cm, weight about 500kg,
dimensions workbench: l = 255, t = 80, h = 210cm, working height = 56cm (may be adjusted) weight about 400kg,
overall dimensions laminar flow box and workbench assembled: l = 255, t = 80, h = 300cm,

suitable e.g. for optics and laser technology, life sciences, printed circuit board manufacturing, electronic components, medical technology and the food industry
 LAMINARFLOW, STAINLESS STERILE WORKBENCH, CLEANROOM AIR HOOD, LAMINAR FLO BOX - SECOND-HAND MANUFACTURER: HELMUT SEIER GMBH, THE LAMINAR FLOW BOX HAS BEEN TESTED AND MEASURED BY A LABORATORY EQUIPMENT COMPANY, THE FILTER OF THE SYSTEM IS COMPLETELY IN ORDER AND FULLY FUNCTIONAL. THE PLANT CONSISTS OF: - THE LAMINAR FLOW BOX, WHICH IS PLACED ON THE WORKBENCH - CLEAN ROOM AIR FILTER - 2 FISCHBACH FANS - ELECTRICAL CIRCUIT AND PROTECTION - INFINITELY VARIABLE SPEED CONTROL OF THE FANS - INCLUDING LIGHTING FOR THE WORKPLACE - WORKBENCH WITH STAINLESS WORK SURFACE AND STAINLESS WALL TECHNICAL SPECIFICATIONS: - LAMINAR FLOW BOX MADE OF STEEL SHEET METAL - FILTER CLASS H14 - CLEANROOM CLASS II - VOLUME FLOW 2 X 0-3595 M³ / H - P 0.86 KW, 230 VOLTS, 0-1390 U / MIN - 0.4M / S AIR OUTLET SPEED - FILTER SURFACE = CLEANROOM WORK SURFACE: 245 X 60CM DIMENSIONS LAMINAR FLOW BOX: L = 255, T = 70, H = 90CM, WEIGHT ABOUT 500KG, DIMENSIONS WORKBENCH: L = 255, T = 80, H = 210CM, WORKING HEIGHT = 56CM (MAY BE ADJUSTED) WEIGHT ABOUT 400KG, OVERALL DIMENSIONS LAMINAR FLOW BOX AND WORKBENCH ASSEMBLED: L = 255, T = 80, H = 300CM, SUITABLE E.G. FOR OPTICS AND LASER TECHNOLOGY, LIFE SCIENCES, PRINTED CIRCUIT BOARD MANUFACTURING, ELECTRONIC COMPONENTS, MEDICAL TECHNOLOGY AND THE FOOD INDUSTRY
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-chamber volume: - liter<br/>useable volume: 1,5 liter<br/>friction: - <br/>motor drive power: 22 kw<br/>condition:        used - refurbished<br/><br/>specification:    laboratory internal mixer - used      <br/><br/>- capacity:       about 1,5 lts<br/>- closing system: frontal door with pneumatic pistons<br/>- pneumatic ram for loading of materials<br/>- rotors model:   tangential type<br/>- new rotary joints for water cooling<br/>- painting:       (color ral in according to your specifications)<br/>- dc engine:      22 kw,<br/>- new electric cabinet with driving system for variable speed of rotors<br/>- n.1 new electric panel<br/>- new on board electric system on the machine<br/>- safety devices in according to standard rules<br/>- manual of use and maintenance in english language and ce marking<br/>- reconditioned and guaranteed machine in according to standard rules<br/><br/>warranty: 1 year<br/><br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> CHAMBER VOLUME: - LITER
USEABLE VOLUME: 1,5 LITER
FRICTION: -
MOTOR DRIVE POWER: 22 KW
CONDITION: USED - REFURBISHED

SPECIFICATION: LABORATORY INTERNAL MIXER - USED

- CAPACITY: ABOUT 1,5 LTS
- CLOSING SYSTEM: FRONTAL DOOR WITH PNEUMATIC PISTONS
- PNEUMATIC RAM FOR LOADING OF MATERIALS
- ROTORS MODEL: TANGENTIAL TYPE
- NEW ROTARY JOINTS FOR WATER COOLING
- PAINTING: (COLOR RAL IN ACCORDING TO YOUR SPECIFICATIONS)
- DC ENGINE: 22 KW,
- NEW ELECTRIC CABINET WITH DRIVING SYSTEM FOR VARIABLE SPEED OF ROTORS
- N.1 NEW ELECTRIC PANEL
- NEW ON BOARD ELECTRIC SYSTEM ON THE MACHINE
- SAFETY DEVICES IN ACCORDING TO STANDARD RULES
- MANUAL OF USE AND MAINTENANCE IN ENGLISH LANGUAGE AND CE MARKING
- RECONDITIONED AND GUARANTEED MACHINE IN ACCORDING TO STANDARD RULES

WARRANTY: 1 YEAR




THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: MEB Maschinenhandel GmbH
Año de construcción: usado
Precio: 1.300 €
Ubicación: Land-laminarflow, sterile workbench, cleanroom air hood, laminar flo box - used
fischbach ventilation technology

the laminar flow box has been tested and measured by a laboratory equipment company, the filter of the system is completely in order and fully functional.

the plant consists of:
- the laminar flow box, where everything is installed
- clean room air filter
- fischbach fan d640 / e350.4
- electrical circuit and protection
- stepless speed control of the fan
- including lighting for the workplace

technical specifications:
- filter class h14
- cleanroom class ii
- volume flow 0-3160m³ / h
- p 0.35kw, 230 volts, 0-1435 rpm
- 0.4m / s air outlet speed
- filter surface = cleanroom work surface: 155 x 80cm

overall dimensions: l = 160, t = 85, h = 92cm, weight about 300kg
suitable e.g. for optics and laser technology, life sciences, printed circuit board manufacturing, electronic components, medical technology and the food industry
 LAMINARFLOW, STERILE WORKBENCH, CLEANROOM AIR HOOD, LAMINAR FLO BOX - USED FISCHBACH VENTILATION TECHNOLOGY THE LAMINAR FLOW BOX HAS BEEN TESTED AND MEASURED BY A LABORATORY EQUIPMENT COMPANY, THE FILTER OF THE SYSTEM IS COMPLETELY IN ORDER AND FULLY FUNCTIONAL. THE PLANT CONSISTS OF: - THE LAMINAR FLOW BOX, WHERE EVERYTHING IS INSTALLED - CLEAN ROOM AIR FILTER - FISCHBACH FAN D640 / E350.4 - ELECTRICAL CIRCUIT AND PROTECTION - STEPLESS SPEED CONTROL OF THE FAN - INCLUDING LIGHTING FOR THE WORKPLACE TECHNICAL SPECIFICATIONS: - FILTER CLASS H14 - CLEANROOM CLASS II - VOLUME FLOW 0-3160M³ / H - P 0.35KW, 230 VOLTS, 0-1435 RPM - 0.4M / S AIR OUTLET SPEED - FILTER SURFACE = CLEANROOM WORK SURFACE: 155 X 80CM OVERALL DIMENSIONS: L = 160, T = 85, H = 92CM, WEIGHT ABOUT 300KG SUITABLE E.G. FOR OPTICS AND LASER TECHNOLOGY, LIFE SCIENCES, PRINTED CIRCUIT BOARD MANUFACTURING, ELECTRONIC COMPONENTS, MEDICAL TECHNOLOGY AND THE FOOD INDUSTRY
Vendedor: IPV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 200 x 350 x 180 mm<br/>description: 1 x mettler type pj 400, 1 x class 4 gold scale WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 200 X 350 X 180 MM
DESCRIPTION: 1 X METTLER TYPE PJ 400, 1 X CLASS 4 GOLD SCALE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-one dinamometer brand tetechno automatic  year 1999  -  cn 10
one lab knitter  year  2005 mesdan  completed creel ONE DINAMOMETER BRAND TETECHNO AUTOMATIC YEAR 1999 - CN 10 ONE LAB KNITTER YEAR 2005 MESDAN COMPLETED CREEL
Vendedor: SERVICES FOR INDUSTRY SAGL
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 400 x 200 x 150 mm<br/>description: various sizes<br> in wooden boxes<br> plus laboratory tools<br> <br> <b>please note special pick-up times only 3 days<br> the buyer will be charged for the costs of stock transfer</b> . WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 200 X 150 MM
DESCRIPTION: VARIOUS SIZES
IN WOODEN BOXES
PLUS LABORATORY TOOLS

PLEASE NOTE SPECIAL PICK-UP TIMES ONLY 3 DAYS
THE BUYER WILL BE CHARGED FOR THE COSTS OF STOCK TRANSFER
.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-laboratory work bench, laboratory island up to 6 workstations ceramic surface, cabinet units, head tank medium tank, with 2 glass board levels approx. dimensions: l: 4.28 m b: 1.50 m working height 0.93 m tower: l: 3.36 m h 0.75 m there are 2 laboratory islands present 2-3 writing jobs price applies to 1 laboratory island   LABORATORY WORK BENCH, LABORATORY ISLAND UP TO 6 WORKSTATIONS CERAMIC SURFACE, CABINET UNITS, HEAD TANK MEDIUM TANK, WITH 2 GLASS BOARD LEVELS APPROX. DIMENSIONS: L: 4.28 M B: 1.50 M WORKING HEIGHT 0.93 M TOWER: L: 3.36 M H 0.75 M THERE ARE 2 LABORATORY ISLANDS PRESENT 2-3 WRITING JOBS PRICE APPLIES TO 1 LABORATORY ISLAND
Vendedor: unipo Gebäudemanagement GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 380 kg<br/>dimensions (l x w x h) approx.: 4040 x 530 x 960 mm<br/>description: with suction device, washbasin with settling basin, consisting of 6 elements which have to be dismantled for loading WEIGHT APPROX.: 380 KG
DIMENSIONS (L X W X H) APPROX.: 4040 X 530 X 960 MM
DESCRIPTION: WITH SUCTION DEVICE, WASHBASIN WITH SETTLING BASIN, CONSISTING OF 6 ELEMENTS WHICH HAVE TO BE DISMANTLED FOR LOADING
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-oystar hÜttlin laboratory fluid bed plant / coater unilab, new 2010

product container m / s volume 14.4 / 7.5 liters
number of filter cartridges 5
number of nozzles 2
nozzle feed: single feed via 2-head peristaltic pump 100-500m³ / h
process supply air temperature max. 80 ° c OYSTAR HÜTTLIN LABORATORY FLUID BED PLANT / COATER UNILAB, NEW 2010 PRODUCT CONTAINER M / S VOLUME 14.4 / 7.5 LITERS NUMBER OF FILTER CARTRIDGES 5 NUMBER OF NOZZLES 2 NOZZLE FEED: SINGLE FEED VIA 2-HEAD PERISTALTIC PUMP 100-500M³ / H PROCESS SUPPLY AIR TEMPERATURE MAX. 80 ° C
Vendedor: Maynards Europe GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 350 x 200 x 170 mm<br/>description: adjustable vibration intensity WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 200 X 170 MM
DESCRIPTION: ADJUSTABLE VIBRATION INTENSITY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-una machines for 4 bobin
perfect for laboratory or little production UNA MACHINES FOR 4 BOBIN PERFECT FOR LABORATORY OR LITTLE PRODUCTION
Vendedor: SERVICES FOR INDUSTRY SAGL
Año de construcción: usado
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 1290 x 1800 x 870 mm<br/>description: each with 2 drawers, individual dimensions 1290 x 600 x 870 mm WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 1290 X 1800 X 870 MM
DESCRIPTION: EACH WITH 2 DRAWERS, INDIVIDUAL DIMENSIONS 1290 X 600 X 870 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.900 €
Ubicación: Land-instrumentation laboratory acl 6000, device for performing tests to study of the coagulation or fibrinolysesytems
parameter determination:
coagulation tests:
pt-fibrinogen (prothrombin and fibrinogen concentration)
-aptt (active partial prothrombin time)
-tt (thrombin time)
-individual factors (ii, v, vii, viii, ix, x, xi, xii: two measuring ranges for high and low concentration)

chromogenic testing:
-antithrombin
-protein c
-plasminogen
-xa heparin
-fibrinogen according to clauss
- d-dimer

special tests:
-proclot (clotting protein c)
-protein s
-apc resistance v
-pro-il-complex
-hepatocomplex

sales commercial/dealer to our terms and conditions. errors and spelling mistakes possible, subject to prior sale! 


INSTRUMENTATION LABORATORY ACL 6000, DEVICE FOR PERFORMING TESTS TO STUDY OF THE COAGULATION OR FIBRINOLYSESYTEMS PARAMETER DETERMINATION: COAGULATION TESTS: PT-FIBRINOGEN (PROTHROMBIN AND FIBRINOGEN CONCENTRATION) -APTT (ACTIVE PARTIAL PROTHROMBIN TIME) -TT (THROMBIN TIME) -INDIVIDUAL FACTORS (II, V, VII, VIII, IX, X, XI, XII: TWO MEASURING RANGES FOR HIGH AND LOW CONCENTRATION) CHROMOGENIC TESTING: -ANTITHROMBIN -PROTEIN C -PLASMINOGEN -XA HEPARIN -FIBRINOGEN ACCORDING TO CLAUSS - D-DIMER SPECIAL TESTS: -PROCLOT (CLOTTING PROTEIN C) -PROTEIN S -APC RESISTANCE V -PRO-IL-COMPLEX -HEPATOCOMPLEX SALES COMMERCIAL/DEALER TO OUR TERMS AND CONDITIONS. ERRORS AND SPELLING MISTAKES POSSIBLE, SUBJECT TO PRIOR SALE!
Vendedor: P&U Medizintechnik
Año de construcción: usado
Precio: used machinery auction RESALE 65 €
Ubicación: Land-weight approx.: 25 kg<br/>dimensions (l x w x h) approx.: 800 x 800 x 500 mm<br/>description: distillation manufacturing equipment glows<br> <br> glass bowls, glass flasks, test tubes and holders<br> <br> <b>please note special pick-up times only 3 days<br> the buyer will be charged for the costs of stock transfer</b> . WEIGHT APPROX.: 25 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 800 X 500 MM
DESCRIPTION: DISTILLATION MANUFACTURING EQUIPMENT GLOWS

GLASS BOWLS, GLASS FLASKS, TEST TUBES AND HOLDERS

PLEASE NOTE SPECIAL PICK-UP TIMES ONLY 3 DAYS
THE BUYER WILL BE CHARGED FOR THE COSTS OF STOCK TRANSFER
.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 24.400 €
Ubicación: Land-minilab for rheological testing of plastics.

was used only in laboratory operation.

very well maintained condition.  MINILAB FOR RHEOLOGICAL TESTING OF PLASTICS. WAS USED ONLY IN LABORATORY OPERATION. VERY WELL MAINTAINED CONDITION.
Vendedor: Susanna Beck Plastics
Año de construcción: usado
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 1300 x 1300 x 950 mm<br/>description: individual dimensions 1260 x 620 x 920 mm, 1x substructure with hinged door and pull-out drawers, 1 x with sink, no drain WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 1300 X 1300 X 950 MM
DESCRIPTION: INDIVIDUAL DIMENSIONS 1260 X 620 X 920 MM, 1X SUBSTRUCTURE WITH HINGED DOOR AND PULL-OUT DRAWERS, 1 X WITH SINK, NO DRAIN
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.800 €
Ubicación: Land-gravimetric dosing unit.

was used only in laboratory operation.

excellent condition.  GRAVIMETRIC DOSING UNIT. WAS USED ONLY IN LABORATORY OPERATION. EXCELLENT CONDITION.
Vendedor: Susanna Beck Plastics
Año de construcción: usado
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 240 x 200 x 100 mm<br/>description: adjustable vibration intensity WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 240 X 200 X 100 MM
DESCRIPTION: ADJUSTABLE VIBRATION INTENSITY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty 1 x schwabenthan 150mm dia x 350mm wide two roll mill, 
manual nip adjustment, 
digital nip gap readout, 
electrically heated rolls, 
even/friction selectable gear ratios,
motor mounted under frame.
complete with electrical controls and in good condition.
o/a dimensions 2400 x 850mm. QTY 1 X SCHWABENTHAN 150MM DIA X 350MM WIDE TWO ROLL MILL, MANUAL NIP ADJUSTMENT, DIGITAL NIP GAP READOUT, ELECTRICALLY HEATED ROLLS, EVEN/FRICTION SELECTABLE GEAR RATIOS, MOTOR MOUNTED UNDER FRAME. COMPLETE WITH ELECTRICAL CONTROLS AND IN GOOD CONDITION. O/A DIMENSIONS 2400 X 850MM.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 400 x 200 x 100 mm<br/>description: model saws, pliers, surgical scissors, spatulas in various designs WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 200 X 100 MM
DESCRIPTION: MODEL SAWS, PLIERS, SURGICAL SCISSORS, SPATULAS IN VARIOUS DESIGNS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qty 1 x schwabenthan 200mm dia x 450mm wide two roll mill,
manual nip adjustment,
digital nip gap readout,
electrically heated rolls,
jahnel gearbox with 10hp motor to each roll (variable speed),
variable friction ratio/roll speeds,
stainless steel interlocked guards and tray.
complete with electrical controls and in good condition. 
o/a dimensions 2700 x 1500mm QTY 1 X SCHWABENTHAN 200MM DIA X 450MM WIDE TWO ROLL MILL, MANUAL NIP ADJUSTMENT, DIGITAL NIP GAP READOUT, ELECTRICALLY HEATED ROLLS, JAHNEL GEARBOX WITH 10HP MOTOR TO EACH ROLL (VARIABLE SPEED), VARIABLE FRICTION RATIO/ROLL SPEEDS, STAINLESS STEEL INTERLOCKED GUARDS AND TRAY. COMPLETE WITH ELECTRICAL CONTROLS AND IN GOOD CONDITION. O/A DIMENSIONS 2700 X 1500MM
Vendedor: Euro Rubber Lines
Año de construcción: usado
Precio: used machinery auction RESALE 110 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 1500 x 750 x 930 mm<br/>description: laboratory table 1500 x 750 x 930 mm<br> each transport trolley 750 x 600 x 830 mm<br> <br> <b>please note special pick-up times: only 3 days<br> the buyer will be charged for the costs of stock transfer</b> . WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 750 X 930 MM
DESCRIPTION: LABORATORY TABLE 1500 X 750 X 930 MM
EACH TRANSPORT TROLLEY 750 X 600 X 830 MM

PLEASE NOTE SPECIAL PICK-UP TIMES: ONLY 3 DAYS
THE BUYER WILL BE CHARGED FOR THE COSTS OF STOCK TRANSFER
.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer:	wiener duyvis
type:		w1s
year:		2015
volume	2,5kg/batch
enginepower:	0,75kw
dimensions:	800x400x1230mm
different:	machine is new, never used

we offer this machine in 'as is' condition, without warranty 
 MANUFACTURER: WIENER DUYVIS TYPE: W1S YEAR: 2015 VOLUME 2,5KG/BATCH ENGINEPOWER: 0,75KW DIMENSIONS: 800X400X1230MM DIFFERENT: MACHINE IS NEW, NEVER USED WE OFFER THIS MACHINE IN 'AS IS' CONDITION, WITHOUT WARRANTY
Vendedor: Peter Heidenreich Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 220 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 300 x 200 x 200 mm<br/>description: delivery rate 6 l/min<br> ultimate vacuum 100 mbar<br> max. allowable operating overpressure 2.5 bar<br> vacuum mounting plates diameter 160 and 100 mm<br> <br> <b>please note special pick-up times: only 3 days<br> the buyer will be charged for the costs of stock transfer</b> . WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 200 X 200 MM
DESCRIPTION: DELIVERY RATE 6 L/MIN
ULTIMATE VACUUM 100 MBAR
MAX. ALLOWABLE OPERATING OVERPRESSURE 2.5 BAR
VACUUM MOUNTING PLATES DIAMETER 160 AND 100 MM

PLEASE NOTE SPECIAL PICK-UP TIMES: ONLY 3 DAYS
THE BUYER WILL BE CHARGED FOR THE COSTS OF STOCK TRANSFER
.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-volume: 5 ltr.
material: stainless steel
drive: 0.37 kw; VOLUME: 5 LTR. MATERIAL: STAINLESS STEEL DRIVE: 0.37 KW;
Vendedor: Minox Maschinenhandels GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 10 kg<br/>dimensions (l x w x h) approx.: 300 x 200 x 220 mm<br/>description: water cooled, with foot switch WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 200 X 220 MM
DESCRIPTION: WATER COOLED, WITH FOOT SWITCH
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more types: