17 ofertas

Año de construcción: usado
Ubicación: Land-hydraulic press lauffer & butscher ops 60

pressing force: 60 t
operating pressure: 298 bar
height: 300 mm
piston stroke: 150 mm
passage between d. pillars: 330mm
table area: 330x180mm
lower: 34 mm / sec
presses: 3.4 mm / sec retreat: 65 mm / sec distance between columns: 330mm
distance from mounting surface until plunger: 300 mm
clamping surface: 430x250mm
electric hydr. control with pressure and stroke-dependent reverse and following preselectable selector switch operating modes:
a.) set (inching)
(b).) 1-manual operation c.) 2-hand safety operation
d.) continuous hub operation, but without timer, durchfalloch 110 mm in the table, insert plate hardened u. ground.

good condition fully functional can be visited on site and tried out.
shipping abroad.

visit:

basically i would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. please ask questions before you purchase to avoid ambiguity.
for general questions or an appointment for a visit i am at the below telephone number, available.

errors in the description and intermediate sale is reserved.

the vat is shown separately on my bills.

shipping with freight forwarding. HYDRAULIC PRESS LAUFFER & BUTSCHER OPS 60 PRESSING FORCE: 60 T OPERATING PRESSURE: 298 BAR HEIGHT: 300 MM PISTON STROKE: 150 MM PASSAGE BETWEEN D. PILLARS: 330MM TABLE AREA: 330X180MM LOWER: 34 MM / SEC PRESSES: 3.4 MM / SEC RETREAT: 65 MM / SEC DISTANCE BETWEEN COLUMNS: 330MM DISTANCE FROM MOUNTING SURFACE UNTIL PLUNGER: 300 MM CLAMPING SURFACE: 430X250MM ELECTRIC HYDR. CONTROL WITH PRESSURE AND STROKE-DEPENDENT REVERSE AND FOLLOWING PRESELECTABLE SELECTOR SWITCH OPERATING MODES: A.) SET (INCHING) (B).) 1-MANUAL OPERATION C.) 2-HAND SAFETY OPERATION D.) CONTINUOUS HUB OPERATION, BUT WITHOUT TIMER, DURCHFALLOCH 110 MM IN THE TABLE, INSERT PLATE HARDENED U. GROUND. GOOD CONDITION FULLY FUNCTIONAL CAN BE VISITED ON SITE AND TRIED OUT. SHIPPING ABROAD. VISIT: BASICALLY I WOULD LIKE TO POINT OUT THAT THE ARTICLE MAY BE VIEWED AND TESTED UNDER POWER TO EXCLUDE MISUNDERSTANDINGS, LIKE BEFORE YOU BUY. PLEASE ASK QUESTIONS BEFORE YOU PURCHASE TO AVOID AMBIGUITY. FOR GENERAL QUESTIONS OR AN APPOINTMENT FOR A VISIT I AM AT THE BELOW TELEPHONE NUMBER, AVAILABLE. ERRORS IN THE DESCRIPTION AND INTERMEDIATE SALE IS RESERVED. THE VAT IS SHOWN SEPARATELY ON MY BILLS. SHIPPING WITH FREIGHT FORWARDING.
Vendedor: Erwin Knoll Import & Export
Año de construcción: usado
Ubicación: Land-pressure total: 200 ton retraction force: 24 ton stroke: 360 mm daylight: 630 mm table surface area : 1.000 x 800 mm ram surface area: 1.000 x 800 mm cushion capacity in table: 100 ton cushion stroke: 160 mm cushion area: 630 x 560 mm ejector in ram: 10 ton upper ejector stroke: 160 mm approach speed: 454 mm / sec working speed: 51 mm / sec return speed: 454 mm / sec free frontal opening l-r: 1.020 mm free lateral opening f-b: 400 mm table height over floor: 750 mm oil volume: 1.430 l required power: 62 kw weight of machine approx.: 17,3 ton PRESSURE TOTAL: 200 TON RETRACTION FORCE: 24 TON STROKE: 360 MM DAYLIGHT: 630 MM TABLE SURFACE AREA : 1.000 X 800 MM RAM SURFACE AREA: 1.000 X 800 MM CUSHION CAPACITY IN TABLE: 100 TON CUSHION STROKE: 160 MM CUSHION AREA: 630 X 560 MM EJECTOR IN RAM: 10 TON UPPER EJECTOR STROKE: 160 MM APPROACH SPEED: 454 MM / SEC WORKING SPEED: 51 MM / SEC RETURN SPEED: 454 MM / SEC FREE FRONTAL OPENING L-R: 1.020 MM FREE LATERAL OPENING F-B: 400 MM TABLE HEIGHT OVER FLOOR: 750 MM OIL VOLUME: 1.430 L REQUIRED POWER: 62 KW WEIGHT OF MACHINE APPROX.: 17,3 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-used, functional condition of production changeover<br/>  <br/>  1 x lauffer ept 63 hydraulic settings change presses of 63 t following deficiencies are known:<br/>  pump defective, press works currently only with pressing force 40 t! <br/>  <br/>  facilities:<br/>  light curtain<br/>  2-hand operation<br/>  siemens s5 115u control specifications:<br/>  maximum pressing force: 630 kn<br/>  maximum withdrawal force: 75 kn<br/>  piston stroke: 165 mm<br/>  height: 404 mm<br/>  throat depth: 275 mm<br/>  table surface: 630 x 500 mm table hole / slot: 80 mm<br/>  t-slots in the table: 18 h11<br/>  table height: 850 mm<br/>  tappet surface: 500 x 400 mm<br/>  stamp borehole with turnbuckle: 50 h7<br/>  power: 11 kw<br/>  <br/>  speeds:<br/>  rapid traverse max: 357 mm / s<br/>  at 100%, press force: 49 mm / s<br/>  return max: 384 mm / s<br/>  <br/>  connection data:<br/>  380 v 50 hz<br/>  27 a<br/>  13 kw<br/>  <br/>  accident prevention regulations valid until 07/2017<br/>  <br/>  including technical documentation dimensions lxwxh: ca. 1700 x 1300 x 2950 mm<br/>  weight: approx. 5000 kg immediately from stock available for casting. <br/>  <br/>  changes / errors in the specifications and subject to prior sale! USED, FUNCTIONAL CONDITION OF PRODUCTION CHANGEOVER

1 X LAUFFER EPT 63 HYDRAULIC SETTINGS CHANGE PRESSES OF 63 T FOLLOWING DEFICIENCIES ARE KNOWN:
PUMP DEFECTIVE, PRESS WORKS CURRENTLY ONLY WITH PRESSING FORCE 40 T!

FACILITIES:
LIGHT CURTAIN
2-HAND OPERATION
SIEMENS S5 115U CONTROL SPECIFICATIONS:
MAXIMUM PRESSING FORCE: 630 KN
MAXIMUM WITHDRAWAL FORCE: 75 KN
PISTON STROKE: 165 MM
HEIGHT: 404 MM
THROAT DEPTH: 275 MM
TABLE SURFACE: 630 X 500 MM TABLE HOLE / SLOT: 80 MM
T-SLOTS IN THE TABLE: 18 H11
TABLE HEIGHT: 850 MM
TAPPET SURFACE: 500 X 400 MM
STAMP BOREHOLE WITH TURNBUCKLE: 50 H7
POWER: 11 KW

SPEEDS:
RAPID TRAVERSE MAX: 357 MM / S
AT 100%, PRESS FORCE: 49 MM / S
RETURN MAX: 384 MM / S

CONNECTION DATA:
380 V 50 HZ
27 A
13 KW

ACCIDENT PREVENTION REGULATIONS VALID UNTIL 07/2017

INCLUDING TECHNICAL DOCUMENTATION DIMENSIONS LXWXH: CA. 1700 X 1300 X 2950 MM
WEIGHT: APPROX. 5000 KG IMMEDIATELY FROM STOCK AVAILABLE FOR CASTING.

CHANGES / ERRORS IN THE SPECIFICATIONS AND SUBJECT TO PRIOR SALE!
Vendedor: Weigel – Consulting
Año de construcción: usado
Ubicación: Land-pressure: 63 t<br/>throat: 280 mm<br/>stroke: 170 mm<br/>ram surface: 450x370 mm<br/>table surface area: 650x500 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 7,0 t<br/>dimensions of the machine ca.: 1400x2000x2900 m<br/><br/><br/><br/><br/> PRESSURE: 63 T
THROAT: 280 MM
STROKE: 170 MM
RAM SURFACE: 450X370 MM
TABLE SURFACE AREA: 650X500 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 7,0 T
DIMENSIONS OF THE MACHINE CA.: 1400X2000X2900 M




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-pressure: 25 t<br/>throat: 500 mm<br/>stroke: 160 mm<br/>table surface area: 800 x 500 mm<br/>ram head dimension: 150 x 400 mm<br/>table hole: 10 x 520 mm<br/>dayligth: 500 mm<br/>weight of the machine ca.: 2800 kg<br/>dimensions of the machine ca.: 1 x 1,8 x 2,97 m<br/>electric 380 volt:  <br/>security controll:  <br/>light barrier:  <br/>protective railing:  <br/>two-hand and food triggering:  <br/>machine was equipped 1998 with new cybelec-cnc-control dnc 50.<br/>machine dealer with own stock of 2500 m² and certification of the database<br/>machineseeker.<br/><br/><br/><br/><br/> PRESSURE: 25 T
THROAT: 500 MM
STROKE: 160 MM
TABLE SURFACE AREA: 800 X 500 MM
RAM HEAD DIMENSION: 150 X 400 MM
TABLE HOLE: 10 X 520 MM
DAYLIGTH: 500 MM
WEIGHT OF THE MACHINE CA.: 2800 KG
DIMENSIONS OF THE MACHINE CA.: 1 X 1,8 X 2,97 M
ELECTRIC 380 VOLT:
SECURITY CONTROLL:
LIGHT BARRIER:
PROTECTIVE RAILING:
TWO-HAND AND FOOD TRIGGERING:
MACHINE WAS EQUIPPED 1998 WITH NEW CYBELEC-CNC-CONTROL DNC 50.
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pressure:0200 t<br/>distance between columns:1020 mm<br/>stroke:380 mm<br/>distance table/ram, max. stroke up, adjustment up:630 mm<br/>table surface area:1000 x 840 mm<br/>pressure of drawing cushion in table:63 t<br/>stroke of drawing cushion in table:200 mm<br/>die cushion area:650 x 520 mm<br/>table height over floor:850 mm<br/>side window:425 mm<br/>ram surface:1000 x 840 mm<br/>speed down:320 mm/s<br/>speed up:312 mm/s<br/>working speed:38 mm/s<br/>oil volume:850 l<br/>power requirement:55,0 + 5,5 kw<br/>weight:16,0 t<br/>dimensions (wxdxh):2,65 x 2,3 x 4,2 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>light guard:sick <br/>cutting impact cushioning: <br/>depth stop:mechanical <br/>ram interlocking: <br/>drawing cushion in table and ram: <br/>foundation pit:not necessary <br/><br/> PRESSURE:0200 T
DISTANCE BETWEEN COLUMNS:1020 MM
STROKE:380 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:630 MM
TABLE SURFACE AREA:1000 X 840 MM
PRESSURE OF DRAWING CUSHION IN TABLE:63 T
STROKE OF DRAWING CUSHION IN TABLE:200 MM
DIE CUSHION AREA:650 X 520 MM
TABLE HEIGHT OVER FLOOR:850 MM
SIDE WINDOW:425 MM
RAM SURFACE:1000 X 840 MM
SPEED DOWN:320 MM/S
SPEED UP:312 MM/S
WORKING SPEED:38 MM/S
OIL VOLUME:850 L
POWER REQUIREMENT:55,0 + 5,5 KW
WEIGHT:16,0 T
DIMENSIONS (WXDXH):2,65 X 2,3 X 4,2 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
LIGHT GUARD:SICK
CUTTING IMPACT CUSHIONING:
DEPTH STOP:MECHANICAL
RAM INTERLOCKING:
DRAWING CUSHION IN TABLE AND RAM:
FOUNDATION PIT:NOT NECESSARY

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure: 40 t<br/>passage width: 200 - 600 mm<br/>stroke: 160 mm<br/>control: siemens simatic s5-110 <br/>draw back pressure: 5,60 t<br/>table-size: 560 x 450 mm<br/>table height over floor: 850 mm<br/>mounting height table-stroke: 360 mm<br/>hole in the table: 80 mm<br/>tank capacity: max. 295 l<br/>total power requirement: 9 kw<br/>weight of the machine ca.: 4,50 t<br/>dimensions of the machine ca.: 1,38 x 1,35 x 2,76 m<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> PRESSURE: 40 T
PASSAGE WIDTH: 200 - 600 MM
STROKE: 160 MM
CONTROL: SIEMENS SIMATIC S5-110
DRAW BACK PRESSURE: 5,60 T
TABLE-SIZE: 560 X 450 MM
TABLE HEIGHT OVER FLOOR: 850 MM
MOUNTING HEIGHT TABLE-STROKE: 360 MM
HOLE IN THE TABLE: 80 MM
TANK CAPACITY: MAX. 295 L
TOTAL POWER REQUIREMENT: 9 KW
WEIGHT OF THE MACHINE CA.: 4,50 T
DIMENSIONS OF THE MACHINE CA.: 1,38 X 1,35 X 2,76 M



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-pressure total: 63 ton stroke: 160 mm daylight: 400 mm distance between the columns: 670 mm spindle adjustment: 250 mm table surface area : 630 x 500 mm ram surface area: 500 x 400 mm roll bending adjustment: 850 mm cushion capacity in table: 160 ton cushion stroke: 80 mm cushion area: 125 mm approach speed: 330 mm / sec working speed: 36 mm / sec return speed: 305 mm / sec oil volume: 250 l required power: 11 kw weight of machine approx.: 3,5 ton PRESSURE TOTAL: 63 TON STROKE: 160 MM DAYLIGHT: 400 MM DISTANCE BETWEEN THE COLUMNS: 670 MM SPINDLE ADJUSTMENT: 250 MM TABLE SURFACE AREA : 630 X 500 MM RAM SURFACE AREA: 500 X 400 MM ROLL BENDING ADJUSTMENT: 850 MM CUSHION CAPACITY IN TABLE: 160 TON CUSHION STROKE: 80 MM CUSHION AREA: 125 MM APPROACH SPEED: 330 MM / SEC WORKING SPEED: 36 MM / SEC RETURN SPEED: 305 MM / SEC OIL VOLUME: 250 L REQUIRED POWER: 11 KW WEIGHT OF MACHINE APPROX.: 3,5 TON
Vendedor: Pressen HAAS GmbH
Año de construcción: usado
Ubicación: Land-pressure:025 t<br/>throat:255 mm<br/>stroke:250 mm<br/>distance table/ram, max. stroke up, adjustment up:400 mm<br/>table surface area:800 x 400 mm<br/>table height over floor:850 mm<br/>die cushion pressure in table:6 t<br/>die cushion stroke in table:100 mm<br/>die cushion area in table:380 x 250 mm<br/>capacity of ejector in ram:2 t<br/>stroke of ejector in ram:40 mm<br/>ram surface:450 x 360 mm<br/>speed down:400 mm/s<br/>speed up:28 - 60 mm/s<br/>working speed:360 mm/s<br/>oil volume:180 l<br/>power requirement:22,0 kva<br/>weight:3,4 t<br/>dimensions (wxdxh):1,35 x 2,2 x 2,9 m<br/>ejector in ram:hydraulic <br/>die cushion in table:hydraulic <br/><br/> PRESSURE:025 T
THROAT:255 MM
STROKE:250 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:400 MM
TABLE SURFACE AREA:800 X 400 MM
TABLE HEIGHT OVER FLOOR:850 MM
DIE CUSHION PRESSURE IN TABLE:6 T
DIE CUSHION STROKE IN TABLE:100 MM
DIE CUSHION AREA IN TABLE:380 X 250 MM
CAPACITY OF EJECTOR IN RAM:2 T
STROKE OF EJECTOR IN RAM:40 MM
RAM SURFACE:450 X 360 MM
SPEED DOWN:400 MM/S
SPEED UP:28 - 60 MM/S
WORKING SPEED:360 MM/S
OIL VOLUME:180 L
POWER REQUIREMENT:22,0 KVA
WEIGHT:3,4 T
DIMENSIONS (WXDXH):1,35 X 2,2 X 2,9 M
EJECTOR IN RAM:HYDRAULIC
DIE CUSHION IN TABLE:HYDRAULIC

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:0320 t<br/>distance between columns:1530/1370 mm<br/>stroke:320 mm<br/>distance table/ram, stroke up:830 mm<br/>table surface area:1500 x 650 mm<br/>die cushion pressure in table:12,5 t<br/>table height over floor:1100 mm<br/>side window:570 mm<br/>ram surface:1240 x 650 mm<br/>capacity of ejector in table:12,5 t<br/>speed down:450 mm/s<br/>speed up:440 mm/s<br/>working speed:63,6 mm/s<br/>oil volume:2100 l<br/>power requirement:2 x 45,0 kw<br/>weight:27,0 t<br/>dimensions (wxdxh):4,0  x 2,3  x 4,9 m<br/>list price: in running function in our warehouse: <br/>list price: including new electrical controls:siemens s 7 <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>drawing cushion in table:hydraulic <br/>drawing cushion in ram:hydraulic <br/>ram interlocking:hydraulic <br/><br/> PRESSURE:0320 T
DISTANCE BETWEEN COLUMNS:1530/1370 MM
STROKE:320 MM
DISTANCE TABLE/RAM, STROKE UP:830 MM
TABLE SURFACE AREA:1500 X 650 MM
DIE CUSHION PRESSURE IN TABLE:12,5 T
TABLE HEIGHT OVER FLOOR:1100 MM
SIDE WINDOW:570 MM
RAM SURFACE:1240 X 650 MM
CAPACITY OF EJECTOR IN TABLE:12,5 T
SPEED DOWN:450 MM/S
SPEED UP:440 MM/S
WORKING SPEED:63,6 MM/S
OIL VOLUME:2100 L
POWER REQUIREMENT:2 X 45,0 KW
WEIGHT:27,0 T
DIMENSIONS (WXDXH):4,0 X 2,3 X 4,9 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
LIST PRICE: INCLUDING NEW ELECTRICAL CONTROLS:SIEMENS S 7
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
DRAWING CUSHION IN TABLE:HYDRAULIC
DRAWING CUSHION IN RAM:HYDRAULIC
RAM INTERLOCKING:HYDRAULIC

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:0160 t<br/>distance between columns:1600/1420 mm<br/>stroke:345 mm<br/>distance table/ram, max. stroke up, adjustment up:830 mm<br/>table surface area:1460 x 850 mm<br/>table height over floor:1100 mm<br/>side window:770 mm<br/>ram surface:1410 x 850 mm<br/>speed down:540 mm/s<br/>speed up:520 mm/s<br/>working speed:26 - 85 mm/s<br/>oil volume:2100 l<br/>power requirement:45,0 kw<br/>weight:23,0 t<br/>dimensions (wxdxh):4,0 x 2,3 x 4,9 m<br/>list price: in running function in our warehouse: <br/>list price: including new electrical controls:siemens s 7 <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>ram interlocking:hydraulisch <br/><br/> PRESSURE:0160 T
DISTANCE BETWEEN COLUMNS:1600/1420 MM
STROKE:345 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:830 MM
TABLE SURFACE AREA:1460 X 850 MM
TABLE HEIGHT OVER FLOOR:1100 MM
SIDE WINDOW:770 MM
RAM SURFACE:1410 X 850 MM
SPEED DOWN:540 MM/S
SPEED UP:520 MM/S
WORKING SPEED:26 - 85 MM/S
OIL VOLUME:2100 L
POWER REQUIREMENT:45,0 KW
WEIGHT:23,0 T
DIMENSIONS (WXDXH):4,0 X 2,3 X 4,9 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
LIST PRICE: INCLUDING NEW ELECTRICAL CONTROLS:SIEMENS S 7
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
RAM INTERLOCKING:HYDRAULISCH

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:0200 t<br/>distance between columns:1800 mm<br/>stroke:710 mm<br/>distance table/ram, max. stroke up, adjustment up:1100 mm<br/>table surface area:1600 x 1300 mm<br/>pressure of drawing cushion in table:80 t<br/>stroke of drawing cushion in table:250 mm<br/>die cushion area:1400 x 1080 mm<br/>table height over floor:800 mm<br/>side window:1300 mm<br/>ram surface:1660 x 1300 mm<br/>speed down:400 mm/s<br/>speed up:410 mm/s<br/>working speed:14,3 x 49,7 mm/s<br/>oil volume: l<br/>height over floor:5,05 m<br/>height beneath floor:0,4 m<br/>power requirement:46,0 kw<br/>weight:25,0 t<br/>dimensions (wxdxh):3,65 x 3,3 x 5,4 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>light guard at front and back:sick <br/>drawing cushion in table:hydraulic <br/>ejector in ram:hydraulic <br/>conrollable dependant on pressure/time and way: <br/>depth stop:mechanical <br/>cutting impact cushioning: <br/>two-hand operation: <br/><br/> PRESSURE:0200 T
DISTANCE BETWEEN COLUMNS:1800 MM
STROKE:710 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:1100 MM
TABLE SURFACE AREA:1600 X 1300 MM
PRESSURE OF DRAWING CUSHION IN TABLE:80 T
STROKE OF DRAWING CUSHION IN TABLE:250 MM
DIE CUSHION AREA:1400 X 1080 MM
TABLE HEIGHT OVER FLOOR:800 MM
SIDE WINDOW:1300 MM
RAM SURFACE:1660 X 1300 MM
SPEED DOWN:400 MM/S
SPEED UP:410 MM/S
WORKING SPEED:14,3 X 49,7 MM/S
OIL VOLUME: L
HEIGHT OVER FLOOR:5,05 M
HEIGHT BENEATH FLOOR:0,4 M
POWER REQUIREMENT:46,0 KW
WEIGHT:25,0 T
DIMENSIONS (WXDXH):3,65 X 3,3 X 5,4 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
LIGHT GUARD AT FRONT AND BACK:SICK
DRAWING CUSHION IN TABLE:HYDRAULIC
EJECTOR IN RAM:HYDRAULIC
CONROLLABLE DEPENDANT ON PRESSURE/TIME AND WAY:
DEPTH STOP:MECHANICAL
CUTTING IMPACT CUSHIONING:
TWO-HAND OPERATION:

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:100 t<br/>throat:540 mm<br/>stroke:560 mm<br/>distance table/ram, max. stroke up, adjustment up:800 mm<br/>table surface area:1000 x 1000 mm<br/>pressure of drawing cushion in table:50 t<br/>stroke of drawing cushion in table:200 mm<br/>die cushion area:710 x 650 mm<br/>table height over floor:910 mm<br/>ram surface:1000 x 1000 mm<br/>capacity of ejector in ram:2 t<br/>ejector stroke in ram:200 mm<br/>return capacity:19,5 t<br/>speed down:400 mm/s<br/>speed up:300 mm/s<br/>working speed:57,7 mm/s<br/>oil volume:650 l<br/>power requirement:37,5 kw<br/>weight:15,0 t<br/>dimensions (wxdxh):1,5 x 2,5 x 4,45 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>drawing cushion / ejector in table:hydraulisch <br/>ejector in ram:hydraulisch <br/>depth stop:mechanisch <br/>cutting impact cushioning: <br/>two-hand operation: <br/><br/> PRESSURE:100 T
THROAT:540 MM
STROKE:560 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:800 MM
TABLE SURFACE AREA:1000 X 1000 MM
PRESSURE OF DRAWING CUSHION IN TABLE:50 T
STROKE OF DRAWING CUSHION IN TABLE:200 MM
DIE CUSHION AREA:710 X 650 MM
TABLE HEIGHT OVER FLOOR:910 MM
RAM SURFACE:1000 X 1000 MM
CAPACITY OF EJECTOR IN RAM:2 T
EJECTOR STROKE IN RAM:200 MM
RETURN CAPACITY:19,5 T
SPEED DOWN:400 MM/S
SPEED UP:300 MM/S
WORKING SPEED:57,7 MM/S
OIL VOLUME:650 L
POWER REQUIREMENT:37,5 KW
WEIGHT:15,0 T
DIMENSIONS (WXDXH):1,5 X 2,5 X 4,45 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
DRAWING CUSHION / EJECTOR IN TABLE:HYDRAULISCH
EJECTOR IN RAM:HYDRAULISCH
DEPTH STOP:MECHANISCH
CUTTING IMPACT CUSHIONING:
TWO-HAND OPERATION:

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:0200 t<br/>distance between columns:970 mm<br/>stroke:360 mm<br/>distance table/ram, max. stroke up, adjustment up:630 mm<br/>table surface area:1000 x 800 mm<br/>capacity of ejector:10 t<br/>ejector stroke in table:160 mm<br/>table height over floor:850 mm<br/>side window:400 mm<br/>ram surface:1000 x 800 mm<br/>speed down:420 mm/s<br/>speed up:410 mm/s<br/>working speed:50 mm/s<br/>oil volume:1240 l<br/>return capacity:24 t<br/>power requirement:45,0 + 15,0 kw<br/>weight:16,0 t<br/>dimensions (wxdxh):2,7 x 2,5 x 4,3 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>conrollable dependant on pressure/time and way: <br/>cutting impact cushioning: <br/>mechanical depth stop: <br/>ram interlocking:mechanisch <br/>two-hand operation: <br/>foundation pit:nicht erforderlich <br/><br/> PRESSURE:0200 T
DISTANCE BETWEEN COLUMNS:970 MM
STROKE:360 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:630 MM
TABLE SURFACE AREA:1000 X 800 MM
CAPACITY OF EJECTOR:10 T
EJECTOR STROKE IN TABLE:160 MM
TABLE HEIGHT OVER FLOOR:850 MM
SIDE WINDOW:400 MM
RAM SURFACE:1000 X 800 MM
SPEED DOWN:420 MM/S
SPEED UP:410 MM/S
WORKING SPEED:50 MM/S
OIL VOLUME:1240 L
RETURN CAPACITY:24 T
POWER REQUIREMENT:45,0 + 15,0 KW
WEIGHT:16,0 T
DIMENSIONS (WXDXH):2,7 X 2,5 X 4,3 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
CONROLLABLE DEPENDANT ON PRESSURE/TIME AND WAY:
CUTTING IMPACT CUSHIONING:
MECHANICAL DEPTH STOP:
RAM INTERLOCKING:MECHANISCH
TWO-HAND OPERATION:
FOUNDATION PIT:NICHT ERFORDERLICH

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:0160 t<br/>distance between columns:1580/1360 mm<br/>stroke:320 mm<br/>distance table/ram, max. stroke up, adjustment up:830 mm<br/>table surface area:1460 x 850 mm<br/>table height over floor:1100 mm<br/>side window:870 mm<br/>ram surface:1400 x 850 mm<br/>speed down:540 mm/s<br/>speed up:520 mm/s<br/>working speed:26 - 85 mm/s<br/>oil volume:2100 l<br/>power requirement:45,0 kw<br/>weight:22,6 t<br/>dimensions (wxdxh):4,0 x 2,3 x 4,9 m<br/>list price: in running function in our warehouse: <br/>list price: including new electrical controls:siemens s 7 <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>ram interlocking:hydraulisch <br/><br/> PRESSURE:0160 T
DISTANCE BETWEEN COLUMNS:1580/1360 MM
STROKE:320 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:830 MM
TABLE SURFACE AREA:1460 X 850 MM
TABLE HEIGHT OVER FLOOR:1100 MM
SIDE WINDOW:870 MM
RAM SURFACE:1400 X 850 MM
SPEED DOWN:540 MM/S
SPEED UP:520 MM/S
WORKING SPEED:26 - 85 MM/S
OIL VOLUME:2100 L
POWER REQUIREMENT:45,0 KW
WEIGHT:22,6 T
DIMENSIONS (WXDXH):4,0 X 2,3 X 4,9 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
LIST PRICE: INCLUDING NEW ELECTRICAL CONTROLS:SIEMENS S 7
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
RAM INTERLOCKING:HYDRAULISCH

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-pressure:0350 t<br/>distance between columns:1350 mm<br/>stroke:900 mm<br/>distance table/ram, max. stroke up, adjustment up:1300 mm<br/>table surface area:1300 x 1000 mm<br/>pressure of drawing cushion in table:100 t<br/>stroke of drawing cushion in table:380 mm<br/>die cushion area:350 x 285 mm<br/>capacity of ejector in ram:25 t<br/>ejector stroke in ram:200 mm<br/>table height over floor:750 mm<br/>ram surface:1300 x 1000 mm<br/>speed down:500 mm/s<br/>speed up:160 - 470 mm/s<br/>working speed:16 - 44 mm/s<br/>drawing speed:57 - 160 mm/s<br/>return capacity:32 t<br/>oil volume:1700 l<br/>height over floor:5,28 m<br/>power requirement:91,0 kw<br/>weight: t<br/>dimensions (wxdxh):3,75 x 2,8 x 7,2 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>light guard:sick <br/>drawing cushion in table:hydraulic <br/>ejector in ram:hydraulic <br/>ram interlocking:in tdc <br/>two-hand operation: <br/>foundation pit:necessary <br/><br/> PRESSURE:0350 T
DISTANCE BETWEEN COLUMNS:1350 MM
STROKE:900 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:1300 MM
TABLE SURFACE AREA:1300 X 1000 MM
PRESSURE OF DRAWING CUSHION IN TABLE:100 T
STROKE OF DRAWING CUSHION IN TABLE:380 MM
DIE CUSHION AREA:350 X 285 MM
CAPACITY OF EJECTOR IN RAM:25 T
EJECTOR STROKE IN RAM:200 MM
TABLE HEIGHT OVER FLOOR:750 MM
RAM SURFACE:1300 X 1000 MM
SPEED DOWN:500 MM/S
SPEED UP:160 - 470 MM/S
WORKING SPEED:16 - 44 MM/S
DRAWING SPEED:57 - 160 MM/S
RETURN CAPACITY:32 T
OIL VOLUME:1700 L
HEIGHT OVER FLOOR:5,28 M
POWER REQUIREMENT:91,0 KW
WEIGHT: T
DIMENSIONS (WXDXH):3,75 X 2,8 X 7,2 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
LIGHT GUARD:SICK
DRAWING CUSHION IN TABLE:HYDRAULIC
EJECTOR IN RAM:HYDRAULIC
RAM INTERLOCKING:IN TDC
TWO-HAND OPERATION:
FOUNDATION PIT:NECESSARY

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-<br>capacity (metric tons) 400<br>stroke (mm) 730<br>distance column/center (throat) (mm) 1000<br>day light (mm) <br>bed length (mm) 1000<br>bed width (mm) 1000<br>
CAPACITY (METRIC TONS) 400
STROKE (MM) 730
DISTANCE COLUMN/CENTER (THROAT) (MM) 1000
DAY LIGHT (MM)
BED LENGTH (MM) 1000
BED WIDTH (MM) 1000
Vendedor: Muller Machines SA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)