27 ofertas

Año de construcción: usado
Ubicación: Land-complete edge processing line consisting of:<br/>  <br/>  o homag edge sanding machine type skl 76;<br/>  o engine number: 0-204-25-0001;<br/>  o built in 1985. <br/>  o 2 milling units tape loops just;<br/>  o 2 x profile grinding. <br/>  o 1 x copy loop above, 2 x brush station;<br/>  o 1 x ligmatech return type zhr 02/11/075, nr. 0-305-07-2691, bj. 2003;<br/>  <br/>  machine is located in a very good state of maintenance and can be tested. <br/>  <br/>  international buyers are welcome!; ready for operation COMPLETE EDGE PROCESSING LINE CONSISTING OF:

O HOMAG EDGE SANDING MACHINE TYPE SKL 76;
O ENGINE NUMBER: 0-204-25-0001;
O BUILT IN 1985.
O 2 MILLING UNITS TAPE LOOPS JUST;
O 2 X PROFILE GRINDING.
O 1 X COPY LOOP ABOVE, 2 X BRUSH STATION;
O 1 X LIGMATECH RETURN TYPE ZHR 02/11/075, NR. 0-305-07-2691, BJ. 2003;

MACHINE IS LOCATED IN A VERY GOOD STATE OF MAINTENANCE AND CAN BE TESTED.

INTERNATIONAL BUYERS ARE WELCOME!; READY FOR OPERATION
Vendedor: Driftmeier Vermögensverwaltungs GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 13.500 €
Ubicación: Land-serial number: 0-261-02-1540 <br/>weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 9000 x2400x 2400 mm<br/>feed: 11-20 m/min<br/>edge thickness: 0,4 - 12 mm<br/>workpiece thickness: 8 - 60  mm<br/>joint trimming unit: ja  <br/>gluing unit: quickmelt <br/>snipping unit: hl 6210  2 x 0,35 kw <br/>rough trimming unit: bf 6230 2 x 0,55kw <br/>fine trimming unit: bf 6335 2x0,55 kw <br/>profile trimming unit: ff 6240 ( 4 motore 0,3 kw) <br/>universal trimming unit: nf3400 nut einheit/grooving unit 1,85kw <br/>flat scraping unit: zf 6600 <br/>profile scraping unit: zk 6510 <br/>total power approx: 18,5 kw<br/>edge magazine with: 1 -fold roller<br/>description: powerful brandt profiline kdn ( kdf) 780 edgebander<br> <br> the machine was later equipped with the joint trimming unit<br> - infeed fence adjustable by programm control<br> - pressure zone adjustable by programm control<br> - quickmelt gluing unit<br> - edge thickness adjustable by programm control<br> - automatic edge-feed<br> - pneumatic adjustment of snipping unit chamfer/straight<br> <br> 1st trimming unit equipped with<br>  , ,pneumatic 2-spot adjustment of vertical sensing rolls<br>  , ,pneumatic axial adjustment<br> <br> 2nd trimming unit equipped with<br>  , ,nc servo motor positioning for different edge<br>  , ,thickness and profiles<br> <br> grooving unit 1,84 kw with:<br>  , ,pneumatic set-in and out ( no intermittent control )<br>  , ,height adjustment by a motor driven axis<br> <br> profile scraper unit with:<br> pneumatic addjustment ( in/out)<br> <br> -interface for return conveying system<br> <br> - ligmatech return conveying system zhr 15.<br> function & specifications:<br> after panels have been edgebanded, they are automatically lifted upwards by a unique scissors action, transferred to a top feeder unit, which feeds the panels onto a gravity roller track for return to operator, crosswise fed panels are automatically rotated for lengthwis SERIAL NUMBER: 0-261-02-1540
WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X2400X 2400 MM
FEED: 11-20 M/MIN
EDGE THICKNESS: 0,4 - 12 MM
WORKPIECE THICKNESS: 8 - 60 MM
JOINT TRIMMING UNIT: JA
GLUING UNIT: QUICKMELT
SNIPPING UNIT: HL 6210 2 X 0,35 KW
ROUGH TRIMMING UNIT: BF 6230 2 X 0,55KW
FINE TRIMMING UNIT: BF 6335 2X0,55 KW
PROFILE TRIMMING UNIT: FF 6240 ( 4 MOTORE 0,3 KW)
UNIVERSAL TRIMMING UNIT: NF3400 NUT EINHEIT/GROOVING UNIT 1,85KW
FLAT SCRAPING UNIT: ZF 6600
PROFILE SCRAPING UNIT: ZK 6510
TOTAL POWER APPROX: 18,5 KW
EDGE MAGAZINE WITH: 1 -FOLD ROLLER
DESCRIPTION: POWERFUL BRANDT PROFILINE KDN ( KDF) 780 EDGEBANDER

THE MACHINE WAS LATER EQUIPPED WITH THE JOINT TRIMMING UNIT
- INFEED FENCE ADJUSTABLE BY PROGRAMM CONTROL
- PRESSURE ZONE ADJUSTABLE BY PROGRAMM CONTROL
- QUICKMELT GLUING UNIT
- EDGE THICKNESS ADJUSTABLE BY PROGRAMM CONTROL
- AUTOMATIC EDGE-FEED
- PNEUMATIC ADJUSTMENT OF SNIPPING UNIT CHAMFER/STRAIGHT

1ST TRIMMING UNIT EQUIPPED WITH
&NBSP,&NBSP,PNEUMATIC 2-SPOT ADJUSTMENT OF VERTICAL SENSING ROLLS
&NBSP,&NBSP,PNEUMATIC AXIAL ADJUSTMENT

2ND TRIMMING UNIT EQUIPPED WITH
&NBSP,&NBSP,NC SERVO MOTOR POSITIONING FOR DIFFERENT EDGE
&NBSP,&NBSP,THICKNESS AND PROFILES

GROOVING UNIT 1,84 KW WITH:
&NBSP,&NBSP,PNEUMATIC SET-IN AND OUT ( NO INTERMITTENT CONTROL )
&NBSP,&NBSP,HEIGHT ADJUSTMENT BY A MOTOR DRIVEN AXIS

PROFILE SCRAPER UNIT WITH:
PNEUMATIC ADDJUSTMENT ( IN/OUT)

-INTERFACE FOR RETURN CONVEYING SYSTEM

- LIGMATECH RETURN CONVEYING SYSTEM ZHR 15.
FUNCTION & SPECIFICATIONS:
AFTER PANELS HAVE BEEN EDGEBANDED, THEY ARE AUTOMATICALLY LIFTED UPWARDS BY A UNIQUE SCISSORS ACTION, TRANSFERRED TO A TOP FEEDER UNIT, WHICH FEEDS THE PANELS ONTO A GRAVITY ROLLER TRACK FOR RETURN TO OPERATOR, CROSSWISE FED PANELS ARE AUTOMATICALLY ROTATED FOR LENGTHWIS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--white belt conveyor<br/>  -strap length: 2,500 mm - belt width: 650 mm - the speed is adjustable - including belt tensioner -WHITE BELT CONVEYOR
-STRAP LENGTH: 2,500 MM - BELT WIDTH: 650 MM - THE SPEED IS ADJUSTABLE - INCLUDING BELT TENSIONER
Vendedor: Driftmeier Vermögensverwaltungs GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 19.200 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 5000 x 2300 x 2100 mm<br/>description: position 1 - type: transfer - brand: ligmatech  position 2 - type: packing-wrapping machine - brand: ligmatech - model: vkc 100   useful working width 200 - 1000 mm   min. / max. working thickness 50 / 200 mm   useful working length: 500 / 2500 mm norm and optional for the security   security norme ce mark  pinomatic not included WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2300 X 2100 MM
DESCRIPTION: POSITION 1 - TYPE: TRANSFER - BRAND: LIGMATECH POSITION 2 - TYPE: PACKING-WRAPPING MACHINE - BRAND: LIGMATECH - MODEL: VKC 100 USEFUL WORKING WIDTH 200 - 1000 MM MIN. / MAX. WORKING THICKNESS 50 / 200 MM USEFUL WORKING LENGTH: 500 / 2500 MM NORM AND OPTIONAL FOR THE SECURITY SECURITY NORME CE MARK PINOMATIC NOT INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-line includes: (1) stacking machine ligmatech (2) longitudinal edge banding machine homag for thin and softforming edges with joining and various post-processing aggregates (3) rotary station (4) transverse edge banding machine homag for thin edges with joining and various post-processing aggregates, cleaning belt and free space.  LINE INCLUDES: (1) STACKING MACHINE LIGMATECH (2) LONGITUDINAL EDGE BANDING MACHINE HOMAG FOR THIN AND SOFTFORMING EDGES WITH JOINING AND VARIOUS POST-PROCESSING AGGREGATES (3) ROTARY STATION (4) TRANSVERSE EDGE BANDING MACHINE HOMAG FOR THIN EDGES WITH JOINING AND VARIOUS POST-PROCESSING AGGREGATES, CLEANING BELT AND FREE SPACE.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 19.800 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 5300 x 2300 x 3150 mm<br/>description: max. machining length 2500 mm, max. machining width 600 mm, max. working height 1300 mm, min. working height 250 mm, control system homatic nc 21, safety standard ce mark WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 5300 X 2300 X 3150 MM
DESCRIPTION: MAX. MACHINING LENGTH 2500 MM, MAX. MACHINING WIDTH 600 MM, MAX. WORKING HEIGHT 1300 MM, MIN. WORKING HEIGHT 250 MM, CONTROL SYSTEM HOMATIC NC 21, SAFETY STANDARD CE MARK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-electrical spindle drive<br/>min/max furniture length: 28 cm / 2m50<br/>min/max furniture height: 35 cm /1m40<br/>min/max furniture width: 30 / 80 cm<br/>working height: 30 cm<br/>pressure horizontal and vertical: 15 to 25 kn<br/>2 speeds: 25 and 50 mm/s<br/>total power installed: 4 kw ELECTRICAL SPINDLE DRIVE
MIN/MAX FURNITURE LENGTH: 28 CM / 2M50
MIN/MAX FURNITURE HEIGHT: 35 CM /1M40
MIN/MAX FURNITURE WIDTH: 30 / 80 CM
WORKING HEIGHT: 30 CM
PRESSURE HORIZONTAL AND VERTICAL: 15 TO 25 KN
2 SPEEDS: 25 AND 50 MM/S
TOTAL POWER INSTALLED: 4 KW
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-return conveyor for panels coming out of a single sided shaping or edge banding machine with fence at the left and with a length of approx.  7,5 m.<br/>max. panelsizes: 2000 x 800 mm., min. 300 x 150 mm.<br/>at the machine outfeed, a table with angular transport brings the panels on the return conveyor belt RETURN CONVEYOR FOR PANELS COMING OUT OF A SINGLE SIDED SHAPING OR EDGE BANDING MACHINE WITH FENCE AT THE LEFT AND WITH A LENGTH OF APPROX. 7,5 M.
MAX. PANELSIZES: 2000 X 800 MM., MIN. 300 X 150 MM.
AT THE MACHINE OUTFEED, A TABLE WITH ANGULAR TRANSPORT BRINGS THE PANELS ON THE RETURN CONVEYOR BELT
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-cardboard packaging machine for flat-pack furniture with 3 packing stations, stationary boxing machine and manual stacking after closing<br/><br/>package sizes: <br/>length 450 to 3000 mm<br/>width 170 to 1000 mm<br/>heigth 28 to 250 mm<br/>weight: to 70 kg.<br/>capacity: 6 to 7 packages/min<br/><br/>elements:<br/>1 x belt vtb05/28/10   3000 x 1000 mm, 900 mm height, 7-40 m/min<br/>3 x belt vtb05/58/10   6000 x 1000 mm, 900 mm height, 7-40 m/min<br/>1 x roller conveyor tr 10/30/14 <br/>1 x roller conveyor tr 10/45/14<br/>1 x cardboard closing machine vkv60, working length- and crosswise<br/>incoming packages are glued lengthwise and positioned at the front,   <br/>they are then closed lengthwise and in the meanwhile crosswises glued and closed at the head, then the package is forwarded, positioned to the back and glued and closed at the back.<br/>1 x hotmelt unit, 8 lit, 12 kw <br/>1 x roller conveyor tr 10/35/12 CARDBOARD PACKAGING MACHINE FOR FLAT-PACK FURNITURE WITH 3 PACKING STATIONS, STATIONARY BOXING MACHINE AND MANUAL STACKING AFTER CLOSING

PACKAGE SIZES:
LENGTH 450 TO 3000 MM
WIDTH 170 TO 1000 MM
HEIGTH 28 TO 250 MM
WEIGHT: TO 70 KG.
CAPACITY: 6 TO 7 PACKAGES/MIN

ELEMENTS:
1 X BELT VTB05/28/10 3000 X 1000 MM, 900 MM HEIGHT, 7-40 M/MIN
3 X BELT VTB05/58/10 6000 X 1000 MM, 900 MM HEIGHT, 7-40 M/MIN
1 X ROLLER CONVEYOR TR 10/30/14
1 X ROLLER CONVEYOR TR 10/45/14
1 X CARDBOARD CLOSING MACHINE VKV60, WORKING LENGTH- AND CROSSWISE
INCOMING PACKAGES ARE GLUED LENGTHWISE AND POSITIONED AT THE FRONT,
THEY ARE THEN CLOSED LENGTHWISE AND IN THE MEANWHILE CROSSWISES GLUED AND CLOSED AT THE HEAD, THEN THE PACKAGE IS FORWARDED, POSITIONED TO THE BACK AND GLUED AND CLOSED AT THE BACK.
1 X HOTMELT UNIT, 8 LIT, 12 KW
1 X ROLLER CONVEYOR TR 10/35/12
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-conveyor belt (4 pieces)\r\nmake: ligmatech\r\nyear: 1999\r\n\r\n2x with motor\r\nmotor: (1x 0,55 kw & 1x 0,7 kw)\r\nlength: 2,45 m\r\nwidth (belt): 65 cm\r\nwidth (table): 80 cm\r\n\r\n1 x with motor (0,75kw) \r\nlength: 5 m\r\nwidth (belt): 65 cm\r\nwidth (table): 80 cm\r\n\r\n(1 x perhaps with motor (0,75kw) missing pulley\r\nlength: 5 m\r\nwidth (belt): 65 cm\r\nwidth (table): 80 cm)\r\n\r\nthe conveyor height is adjustable from approx. 70 - 100 cm.\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. data are for information and are not binding. CONVEYOR BELT (4 PIECES)\R\NMAKE: LIGMATECH\R\NYEAR: 1999\R\N\R\N2X WITH MOTOR\R\NMOTOR: (1X 0,55 KW & 1X 0,7 KW)\R\NLENGTH: 2,45 M\R\NWIDTH (BELT): 65 CM\R\NWIDTH (TABLE): 80 CM\R\N\R\N1 X WITH MOTOR (0,75KW) \R\NLENGTH: 5 M\R\NWIDTH (BELT): 65 CM\R\NWIDTH (TABLE): 80 CM\R\N\R\N(1 X PERHAPS WITH MOTOR (0,75KW) MISSING PULLEY\R\NLENGTH: 5 M\R\NWIDTH (BELT): 65 CM\R\NWIDTH (TABLE): 80 CM)\R\N\R\NTHE CONVEYOR HEIGHT IS ADJUSTABLE FROM APPROX. 70 - 100 CM.\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATA ARE FOR INFORMATION AND ARE NOT BINDING.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-single sided egde banding machine\r\nbrand: brandt\r\ntype: kd 99 f\r\nyear: 1999\r\n\r\nwith ligmatech workpiece return type: zhr 15\r\n\r\ntechnical data:\r\n\r\nelectrical interface ligmatech zhr 15\r\n\r\nv-belt top up to 1500 mm (installing) length\r\n\r\ninfeed fence adjustable\r\n\r\nspecial infeed fence for the process of laminate overhangs\r\nmin. workpiece thickness: 16 mm\r\nmax. laminate overhang: 5 mm\r\n\r\nprogram controlled adjustment infeed fence\r\n\r\nprogram controlled adjustment pressure zone\r\n\r\npre-milling unit 2 x 3,0 kw 200 hz\r\n\r\ngluing unit qa 34 quickmelt (changable)\r\n\r\nend trimming unit hl 83 chamfer / straight\r\nmax. cross-section 900 mm2\r\nmax. 45 mm x 20 mm\r\n\r\nrough milling unit 2x1,5 kw 0 degrees\r\n\r\nmilling unit 2 x 0,55 kw 0 - 25 degrees\r\nnote: version as multi-step unit incl. program controlled 6-axes-adjustment and multi-step tools r=2 mm / r=3 mm / chamfer\r\n\r\ncontour trimmng unit top / bottom 4 x 0,3 kw\r\n\r\nscraping unit for pvc edges\r\n\r\nflat scraping unit glued joint\r\n\r\nbuffing unit oscillating with insert control\r\n\r\nnc 21-kompakt\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n\r\n SINGLE SIDED EGDE BANDING MACHINE\R\NBRAND: BRANDT\R\NTYPE: KD 99 F\R\NYEAR: 1999\R\N\R\NWITH LIGMATECH WORKPIECE RETURN TYPE: ZHR 15\R\N\R\NTECHNICAL DATA:\R\N\R\NELECTRICAL INTERFACE LIGMATECH ZHR 15\R\N\R\NV-BELT TOP UP TO 1500 MM (INSTALLING) LENGTH\R\N\R\NINFEED FENCE ADJUSTABLE\R\N\R\NSPECIAL INFEED FENCE FOR THE PROCESS OF LAMINATE OVERHANGS\R\NMIN. WORKPIECE THICKNESS: 16 MM\R\NMAX. LAMINATE OVERHANG: 5 MM\R\N\R\NPROGRAM CONTROLLED ADJUSTMENT INFEED FENCE\R\N\R\NPROGRAM CONTROLLED ADJUSTMENT PRESSURE ZONE\R\N\R\NPRE-MILLING UNIT 2 X 3,0 KW 200 HZ\R\N\R\NGLUING UNIT QA 34 QUICKMELT (CHANGABLE)\R\N\R\NEND TRIMMING UNIT HL 83 CHAMFER / STRAIGHT\R\NMAX. CROSS-SECTION 900 MM2\R\NMAX. 45 MM X 20 MM\R\N\R\NROUGH MILLING UNIT 2X1,5 KW 0 DEGREES\R\N\R\NMILLING UNIT 2 X 0,55 KW 0 - 25 DEGREES\R\NNOTE: VERSION AS MULTI-STEP UNIT INCL. PROGRAM CONTROLLED 6-AXES-ADJUSTMENT AND MULTI-STEP TOOLS R=2 MM / R=3 MM / CHAMFER\R\N\R\NCONTOUR TRIMMNG UNIT TOP / BOTTOM 4 X 0,3 KW\R\N\R\NSCRAPING UNIT FOR PVC EDGES\R\N\R\NFLAT SCRAPING UNIT GLUED JOINT\R\N\R\NBUFFING UNIT OSCILLATING WITH INSERT CONTROL\R\N\R\NNC 21-KOMPAKT\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: ima, type: compact, year: 1995, min-max edge material mm: 0,5-3,0, work piece width min-max mm: 80, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-50, min-max feed m/min: ca.15, einlauflineal gesteuert: no, premilling: yes, application of separation agent: yes, ir zone: yes, coil magazine: 1, strip magazin: 1, min.-max. batten magazine mm: 1, bevel milling: yes, 2 motors: yes, radius scraper: yes, type of scraper: yes, spraying system 2: yes, bonding part eva: yes, groove milling: yes, buffing unit: yes, top pressure belt/roller: rolle, work piece refeeding: ligmatech zhr 02, year :1995 MANUFACTURER: IMA, TYPE: COMPACT, YEAR: 1995, MIN-MAX EDGE MATERIAL MM: 0,5-3,0, WORK PIECE WIDTH MIN-MAX MM: 80, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-50, MIN-MAX FEED M/MIN: CA.15, EINLAUFLINEAL GESTEUERT: NO, PREMILLING: YES, APPLICATION OF SEPARATION AGENT: YES, IR ZONE: YES, COIL MAGAZINE: 1, STRIP MAGAZIN: 1, MIN.-MAX. BATTEN MAGAZINE MM: 1, BEVEL MILLING: YES, 2 MOTORS: YES, RADIUS SCRAPER: YES, TYPE OF SCRAPER: YES, SPRAYING SYSTEM 2: YES, BONDING PART EVA: YES, GROOVE MILLING: YES, BUFFING UNIT: YES, TOP PRESSURE BELT/ROLLER: ROLLE, WORK PIECE REFEEDING: LIGMATECH ZHR 02, YEAR :1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-durchlaufbohrmaschine nottmeyer\r\nmit ligmatech drehstapler zde uni-jet DURCHLAUFBOHRMASCHINE NOTTMEYER\R\NMIT LIGMATECH DREHSTAPLER ZDE UNI-JET
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-rückführung\r\nhersteller: ligmatech\r\ntyp: zhr 15/xx/re\r\nbaujahr: 1995\r\n\r\nfür rechtsmaschine\r\n RüCKFüHRUNG\R\NHERSTELLER: LIGMATECH\R\NTYP: ZHR 15/XX/RE\R\NBAUJAHR: 1995\R\N\R\NFüR RECHTSMASCHINE\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 11.800 €
Ubicación: Land-single sided edge banding machine\r\nbrand: homag\r\ntype: kl 76/a3/s2 optimat\r\nyear: 1996\r\n\r\ntechnical data:\r\n\r\ntop pressure:\r\nwith driven v-belt\r\nmotorical height adjustment\r\n\r\n- enter nc16\r\n- programmable logic control (sps)\r\n\r\n- feed stepless adjustable 18-24 m/min.\r\n- working height 950 mm\r\n- working width min.: 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12-60 mm\r\n- edge material coil 0,3-3 mm\r\n- edge cross sectional area max. 135 mm2\r\n- coil Ø max. 900 mm\r\n\r\nworkpiece support for single sided machine\r\nextension of the workpiece support: 6 x left hand side\r\nadditional extension of workpiece support up to max. 1500 mm incl. supports from ground\r\n\r\npre-installation for addition of boomerang/ligmatech\r\n\r\npre-milling unit:\r\n2 motors each 3 kw\r\n\r\nhot melt unit\r\nmelting unit with granulate tank\r\n\r\nextension of magazine to 6 coils\r\nedge thickness 2x3 mm und 4x1 mm\r\ncoil Ø 2x900 mm and 4x600 mm\r\ncoil change automatical or manual\r\nrest length monitoring at 2400 mm\r\n\r\npressure zone\r\n1 driven pre-pressure rollers Ø 150 mm\r\n2 post-pressure rollers Ø 70 mm\r\n\r\nend trimming unit hl81 chamfer/straight\r\n2 motors each 0,18 kw\r\nadjusting device chamfer/straight for hl end trimming\r\n\r\nrough milling unit 0,55 kw \r\n2 motors one above the other each 0,55 kw\r\n\r\nprofile milling unit fk03\r\n2 motors each 0,55 kw\r\nautomatical 4-fold tool changer\r\nselector switch lengthwise-/all round milling.\r\nfeed max. 20 m/min.\r\nworkpiece length min.: 240 mm single sided, 240 mm double sided\r\ndistance between workpieces min. 650 mm\r\nworkpiece thickness 12-60 mm\r\nthe min. workpiece length increases up to 230mm at use of workpieces with more than 40 mm thickness\r\n\r\npost-cleaning device profile\r\n2 x left hand side profile scraper for post-cleaninn device\r\npost-cleaning device glued joint\r\n1 x empty space left hand side approx. 345 mm\r\nbuffing unit top and bottom with oscillation\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n SINGLE SIDED EDGE BANDING MACHINE\R\NBRAND: HOMAG\R\NTYPE: KL 76/A3/S2 OPTIMAT\R\NYEAR: 1996\R\N\R\NTECHNICAL DATA:\R\N\R\NTOP PRESSURE:\R\NWITH DRIVEN V-BELT\R\NMOTORICAL HEIGHT ADJUSTMENT\R\N\R\N- ENTER NC16\R\N- PROGRAMMABLE LOGIC CONTROL (SPS)\R\N\R\N- FEED STEPLESS ADJUSTABLE 18-24 M/MIN.\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.: 55 MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM (DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12-60 MM\R\N- EDGE MATERIAL COIL 0,3-3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX. 135 MM2\R\N- COIL Ø MAX. 900 MM\R\N\R\NWORKPIECE SUPPORT FOR SINGLE SIDED MACHINE\R\NEXTENSION OF THE WORKPIECE SUPPORT: 6 X LEFT HAND SIDE\R\NADDITIONAL EXTENSION OF WORKPIECE SUPPORT UP TO MAX. 1500 MM INCL. SUPPORTS FROM GROUND\R\N\R\NPRE-INSTALLATION FOR ADDITION OF BOOMERANG/LIGMATECH\R\N\R\NPRE-MILLING UNIT:\R\N2 MOTORS EACH 3 KW\R\N\R\NHOT MELT UNIT\R\NMELTING UNIT WITH GRANULATE TANK\R\N\R\NEXTENSION OF MAGAZINE TO 6 COILS\R\NEDGE THICKNESS 2X3 MM UND 4X1 MM\R\NCOIL Ø 2X900 MM AND 4X600 MM\R\NCOIL CHANGE AUTOMATICAL OR MANUAL\R\NREST LENGTH MONITORING AT 2400 MM\R\N\R\NPRESSURE ZONE\R\N1 DRIVEN PRE-PRESSURE ROLLERS Ø 150 MM\R\N2 POST-PRESSURE ROLLERS Ø 70 MM\R\N\R\NEND TRIMMING UNIT HL81 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,18 KW\R\NADJUSTING DEVICE CHAMFER/STRAIGHT FOR HL END TRIMMING\R\N\R\NROUGH MILLING UNIT 0,55 KW \R\N2 MOTORS ONE ABOVE THE OTHER EACH 0,55 KW\R\N\R\NPROFILE MILLING UNIT FK03\R\N2 MOTORS EACH 0,55 KW\R\NAUTOMATICAL 4-FOLD TOOL CHANGER\R\NSELECTOR SWITCH LENGTHWISE-/ALL ROUND MILLING.\R\NFEED MAX. 20 M/MIN.\R\NWORKPIECE LENGTH MIN.: 240 MM SINGLE SIDED, 240 MM DOUBLE SIDED\R\NDISTANCE BETWEEN WORKPIECES MIN. 650 MM\R\NWORKPIECE THICKNESS 12-60 MM\R\NTHE MIN. WORKPIECE LENGTH INCREASES UP TO 230MM AT USE OF WORKPIECES WITH MORE THAN 40 MM THICKNESS\R\N\R\NPOST-CLEANING DEVICE PROFILE\R\N2 X LEFT HAND SIDE PROFILE SCRAPER FOR POST-CLEANINN DEVICE\R\NPOST-CLEANING DEVICE GLUED JOINT\R\N1 X EMPTY SPACE LEFT HAND SIDE APPROX. 345 MM\R\NBUFFING UNIT TOP AND BOTTOM WITH OSCILLATION\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 31.500 €
Ubicación: Land-single sided edge banding machine\r\nmake: homag\r\ntype: kl 79/a20/s2-20mm\r\nyear: 2000\r\n\r\ntechnical data:\r\ncoil or as strip, up to 20 mm edge thickness, in lenghtwise and crosswise feed.\r\n\r\ncontrol nc21\r\n\r\n- feed stepless controllable 18 - 24 m/min\r\n- working height 950 mm\r\n- working width min.:\r\n- 55 mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length)\r\n- workpiece overhang 30 mm\r\n- workpiece thickness 12 - 60 mm\r\n- edge material strip max. 0,4 - 20 mm\r\n- edge cross sectional area strip max. 900 mm2\r\n- edge material coil 0,3 - 3 mm\r\n- edge cross sectional area max.: at pvc 135 mm2,  at veneer 100 mm2\r\n- coil Ø max. 830 mm\r\n- floor condition should match the foundation plan.\r\n\r\nsliding table\r\n- for rectangular feed at single sided processing.\r\n-workpiece dimensions max. 500 x 1600 mm\r\n\r\nanti-stick solvent application\r\n-via spraying nozzles top/bottom\r\n\r\npre-milling unit \r\n2 motoren je 3 kw, 150 hz, 9000 1/min.\r\n\r\nworkpiece pre-heating:\r\nto heat the workpiece edge before glue application for a better glue quality\r\n\r\ngluing unit a20:\r\nconsisting of:\r\nhot melt unit 0a34\r\n\r\nmagazine\r\nfor strip ware, massive edges and coil ware\r\nfeed of strip ware via vacuum succer\r\nedge monitoring with automatical feed stop at missing edge\r\n\r\npressure zone c\r\n1 driven pre-pressure roller Ø 150 mm\r\n6 post-pressure rollers Ø 70 mm\r\npressure adjustments pneumatical\r\ncentral adjustment on different edge thicknesses\r\n\r\nautomatical adjustment pressure zone optimat\r\nfor automatical adjustment of pressure zone at different edge thickness\r\n\r\n1 pc. chip removal conveyor for optimat installed in machine stand.\r\n\r\nend trimming unit hl 83 chamfer/straight\r\n2 motors each 0,5 kw, 200 hz., 12000 rpm.\r\nfor the end trimming of edge overhangs on frontal and rear edge\r\nedge thickness chamfer max. 3 mm\r\n\r\nautomatical adjustment hl 81/83\r\nfor electropneumatical setup from chamfer to straight and stepless adjustment of foldable side stop for chamfer end trimming at different edge thicknesses.\r\n\r\npneumatical adjustment end trimming motor lateral for electropneumatical side adjustments of end trimming motors on 2 positions.\r\nposition 1 - flush trimming\r\nposition 2 - end trimming with overhang - for post-milling with profile milling unit\r\n\r\n1 pc rough milling unit 1,5 kw optimat\r\n2 motors one above the other each 1,5 kw, 200 hz., 12000 rpm.\r\n\r\n1 pc pneumatical adjustment rough milling unit optimat on 2 positions\r\nposition 1 - rough milling with edge overhang (approx. 0,2 mm)\r\nposition 2 - flush milling without edge overhang\r\n\r\n1 pc. profile milling unit fk 13 8-fold automatical\r\nfor processing of edge overhangs on the workpiece top- and bottom edge as well for milling arround top- and bottom edge in connection to end trimming unit and rough milling unit.\r\n2 motors each 0,4 kw, 200 hz., 12000 rpm.\r\nautomatical 8 -fold tool changer.\r\nselector switch lengthwise-/surround milling.\r\nfeed max. 20 m/min.\r\nworkpiece length min. -  240 mm single sidede, 120 mm double sided\r\ndistance between workpieces min. 650 mm\r\nworkpiece thickness 12  -  60 mm\r\nedge thickness max. 5 mm\r\n\r\nautomatical adjustment for fk-device\r\nfor automatical adjustment at same radii on different edge thickness f.e. r=3 mm on egde thickness 3 mm or 6 mm and for moving out of the working area.\r\n\r\n1 x universal milling unit 4 kw controlled uf11\r\n- installed on back side of miller stand\r\n- cross support with spindle adjustment\r\n- 1 motor 4 kw, 150 hz., 9000 rpm\r\n- swivable max. 90 degrees\r\n\r\n1 pc. re-cleaning unit profile\r\ntracing from above, bottom and side for chamfering or rounding of rough milled pvc-edges. blowing nozzles electropneumatical controlled.\r\n\r\n1 pc. pvc-chip tear off top/bottom for better pvc-chip removal\r\n\r\n2 pcs. pneumatic adjustment re-cleaning profil optimat\r\nfor electropneumatical lateral move out of the working area.\r\n\r\n1 pc. re-cleaning device glued joint\r\nremove of glue rests in the area of glued joint. tracing from top and bottom.\r\n\r\n1 pc. pneumatic adjusments re-cleaning profil optimat\r\nfor electropneumatical lateral move out of the working area\r\n\r\n1 pc. buffing unit top and bottom with oscilating for making the edges handy.\r\n2 motors each 0,25 kw, tilt and height adjustable\r\n\r\nligmatech workpiece return\r\nzhr 10/s left hand side 9500 mm\r\n\r\nfor edge banding machine left hand side, length approx. 9500 mm\r\nthe workpiece return zhr 10 allows the one-man-operation of single sided throughfeed machines. workpieces which come out of the machine are transported to a roller conveyor and will be crosswise transfered via a driven v-belt and will be returned via a belt and a roller table.\r\n\r\nthe option turning plus top pressure allows the 90° turn of workpieces coming out of the machine and will be lengthwise returned\r\n\r\nthe following version consists of:\r\n-  roller conveyor tr 10/42/22 with takeover v-belts of the kl\r\nturning plate with turn support, thickness adjustment manual\r\nsmall parts construction set in front of cycle fenc SINGLE SIDED EDGE BANDING MACHINE\R\NMAKE: HOMAG\R\NTYPE: KL 79/A20/S2-20MM\R\NYEAR: 2000\R\N\R\NTECHNICAL DATA:\R\NCOIL OR AS STRIP, UP TO 20 MM EDGE THICKNESS, IN LENGHTWISE AND CROSSWISE FEED.\R\N\R\NCONTROL NC21\R\N\R\N- FEED STEPLESS CONTROLLABLE 18 - 24 M/MIN\R\N- WORKING HEIGHT 950 MM\R\N- WORKING WIDTH MIN.:\R\N- 55 MM AT WORKPIECE THICKNESS 22 MM, 100 MM AT WORKPIECE THICKNESS 60 MM (DEPENDING ON THE WORKPIECE LENGTH)\R\N- WORKPIECE OVERHANG 30 MM\R\N- WORKPIECE THICKNESS 12 - 60 MM\R\N- EDGE MATERIAL STRIP MAX. 0,4 - 20 MM\R\N- EDGE CROSS SECTIONAL AREA STRIP MAX. 900 MM2\R\N- EDGE MATERIAL COIL 0,3 - 3 MM\R\N- EDGE CROSS SECTIONAL AREA MAX.: AT PVC 135 MM2, AT VENEER 100 MM2\R\N- COIL Ø MAX. 830 MM\R\N- FLOOR CONDITION SHOULD MATCH THE FOUNDATION PLAN.\R\N\R\NSLIDING TABLE\R\N- FOR RECTANGULAR FEED AT SINGLE SIDED PROCESSING.\R\N-WORKPIECE DIMENSIONS MAX. 500 X 1600 MM\R\N\R\NANTI-STICK SOLVENT APPLICATION\R\N-VIA SPRAYING NOZZLES TOP/BOTTOM\R\N\R\NPRE-MILLING UNIT \R\N2 MOTOREN JE 3 KW, 150 HZ, 9000 1/MIN.\R\N\R\NWORKPIECE PRE-HEATING:\R\NTO HEAT THE WORKPIECE EDGE BEFORE GLUE APPLICATION FOR A BETTER GLUE QUALITY\R\N\R\NGLUING UNIT A20:\R\NCONSISTING OF:\R\NHOT MELT UNIT 0A34\R\N\R\NMAGAZINE\R\NFOR STRIP WARE, MASSIVE EDGES AND COIL WARE\R\NFEED OF STRIP WARE VIA VACUUM SUCCER\R\NEDGE MONITORING WITH AUTOMATICAL FEED STOP AT MISSING EDGE\R\N\R\NPRESSURE ZONE C\R\N1 DRIVEN PRE-PRESSURE ROLLER Ø 150 MM\R\N6 POST-PRESSURE ROLLERS Ø 70 MM\R\NPRESSURE ADJUSTMENTS PNEUMATICAL\R\NCENTRAL ADJUSTMENT ON DIFFERENT EDGE THICKNESSES\R\N\R\NAUTOMATICAL ADJUSTMENT PRESSURE ZONE OPTIMAT\R\NFOR AUTOMATICAL ADJUSTMENT OF PRESSURE ZONE AT DIFFERENT EDGE THICKNESS\R\N\R\N1 PC. CHIP REMOVAL CONVEYOR FOR OPTIMAT INSTALLED IN MACHINE STAND.\R\N\R\NEND TRIMMING UNIT HL 83 CHAMFER/STRAIGHT\R\N2 MOTORS EACH 0,5 KW, 200 HZ., 12000 RPM.\R\NFOR THE END TRIMMING OF EDGE OVERHANGS ON FRONTAL AND REAR EDGE\R\NEDGE THICKNESS CHAMFER MAX. 3 MM\R\N\R\NAUTOMATICAL ADJUSTMENT HL 81/83\R\NFOR ELECTROPNEUMATICAL SETUP FROM CHAMFER TO STRAIGHT AND STEPLESS ADJUSTMENT OF FOLDABLE SIDE STOP FOR CHAMFER END TRIMMING AT DIFFERENT EDGE THICKNESSES.\R\N\R\NPNEUMATICAL ADJUSTMENT END TRIMMING MOTOR LATERAL FOR ELECTROPNEUMATICAL SIDE ADJUSTMENTS OF END TRIMMING MOTORS ON 2 POSITIONS.\R\NPOSITION 1 - FLUSH TRIMMING\R\NPOSITION 2 - END TRIMMING WITH OVERHANG - FOR POST-MILLING WITH PROFILE MILLING UNIT\R\N\R\N1 PC ROUGH MILLING UNIT 1,5 KW OPTIMAT\R\N2 MOTORS ONE ABOVE THE OTHER EACH 1,5 KW, 200 HZ., 12000 RPM.\R\N\R\N1 PC PNEUMATICAL ADJUSTMENT ROUGH MILLING UNIT OPTIMAT ON 2 POSITIONS\R\NPOSITION 1 - ROUGH MILLING WITH EDGE OVERHANG (APPROX. 0,2 MM)\R\NPOSITION 2 - FLUSH MILLING WITHOUT EDGE OVERHANG\R\N\R\N1 PC. PROFILE MILLING UNIT FK 13 8-FOLD AUTOMATICAL\R\NFOR PROCESSING OF EDGE OVERHANGS ON THE WORKPIECE TOP- AND BOTTOM EDGE AS WELL FOR MILLING ARROUND TOP- AND BOTTOM EDGE IN CONNECTION TO END TRIMMING UNIT AND ROUGH MILLING UNIT.\R\N2 MOTORS EACH 0,4 KW, 200 HZ., 12000 RPM.\R\NAUTOMATICAL 8 -FOLD TOOL CHANGER.\R\NSELECTOR SWITCH LENGTHWISE-/SURROUND MILLING.\R\NFEED MAX. 20 M/MIN.\R\NWORKPIECE LENGTH MIN. - 240 MM SINGLE SIDEDE, 120 MM DOUBLE SIDED\R\NDISTANCE BETWEEN WORKPIECES MIN. 650 MM\R\NWORKPIECE THICKNESS 12 - 60 MM\R\NEDGE THICKNESS MAX. 5 MM\R\N\R\NAUTOMATICAL ADJUSTMENT FOR FK-DEVICE\R\NFOR AUTOMATICAL ADJUSTMENT AT SAME RADII ON DIFFERENT EDGE THICKNESS F.E. R=3 MM ON EGDE THICKNESS 3 MM OR 6 MM AND FOR MOVING OUT OF THE WORKING AREA.\R\N\R\N1 X UNIVERSAL MILLING UNIT 4 KW CONTROLLED UF11\R\N- INSTALLED ON BACK SIDE OF MILLER STAND\R\N- CROSS SUPPORT WITH SPINDLE ADJUSTMENT\R\N- 1 MOTOR 4 KW, 150 HZ., 9000 RPM\R\N- SWIVABLE MAX. 90 DEGREES\R\N\R\N1 PC. RE-CLEANING UNIT PROFILE\R\NTRACING FROM ABOVE, BOTTOM AND SIDE FOR CHAMFERING OR ROUNDING OF ROUGH MILLED PVC-EDGES. BLOWING NOZZLES ELECTROPNEUMATICAL CONTROLLED.\R\N\R\N1 PC. PVC-CHIP TEAR OFF TOP/BOTTOM FOR BETTER PVC-CHIP REMOVAL\R\N\R\N2 PCS. PNEUMATIC ADJUSTMENT RE-CLEANING PROFIL OPTIMAT\R\NFOR ELECTROPNEUMATICAL LATERAL MOVE OUT OF THE WORKING AREA.\R\N\R\N1 PC. RE-CLEANING DEVICE GLUED JOINT\R\NREMOVE OF GLUE RESTS IN THE AREA OF GLUED JOINT. TRACING FROM TOP AND BOTTOM.\R\N\R\N1 PC. PNEUMATIC ADJUSMENTS RE-CLEANING PROFIL OPTIMAT\R\NFOR ELECTROPNEUMATICAL LATERAL MOVE OUT OF THE WORKING AREA\R\N\R\N1 PC. BUFFING UNIT TOP AND BOTTOM WITH OSCILATING FOR MAKING THE EDGES HANDY.\R\N2 MOTORS EACH 0,25 KW, TILT AND HEIGHT ADJUSTABLE\R\N\R\NLIGMATECH WORKPIECE RETURN\R\NZHR 10/S LEFT HAND SIDE 9500 MM\R\N\R\NFOR EDGE BANDING MACHINE LEFT HAND SIDE, LENGTH APPROX. 9500 MM\R\NTHE WORKPIECE RETURN ZHR 10 ALLOWS THE ONE-MAN-OPERATION OF SINGLE SIDED THROUGHFEED MACHINES. WORKPIECES WHICH COME OUT OF THE MACHINE ARE TRANSPORTED TO A ROLLER CONVEYOR AND WILL BE CROSSWISE TRANSFERED VIA A DRIVEN V-BELT AND WILL BE RETURNED VIA A BELT AND A ROLLER TABLE.\R\N\R\NTHE OPTION TURNING PLUS TOP PRESSURE ALLOWS THE 90° TURN OF WORKPIECES COMING OUT OF THE MACHINE AND WILL BE LENGTHWISE RETURNED\R\N\R\NTHE FOLLOWING VERSION CONSISTS OF:\R\N- ROLLER CONVEYOR TR 10/42/22 WITH TAKEOVER V-BELTS OF THE KL\R\NTURNING PLATE WITH TURN SUPPORT, THICKNESS ADJUSTMENT MANUAL\R\NSMALL PARTS CONSTRUCTION SET IN FRONT OF CYCLE FENC
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-rückführung für einseitige kantenanleimmaschine (rechtsmaschine)\r\nfabrikat: ligmatech\r\ntyp: zhr 05/r/105\r\nbaujahr: 2000\r\n\r\nlänge: ca. 12 meter\r\n\r\n RüCKFüHRUNG FüR EINSEITIGE KANTENANLEIMMASCHINE (RECHTSMASCHINE)\R\NFABRIKAT: LIGMATECH\R\NTYP: ZHR 05/R/105\R\NBAUJAHR: 2000\R\N\R\NLäNGE: CA. 12 METER\R\N\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-serial number: 0-200-19-1438 <br/>weight approx.: 5000 kg<br/>dimensions (l x w x h) approx.: 1x1x1 mm<br/>feed: 18 m/min<br/>edge thickness: 0,4 - 20 mm<br/>workpiece thickness: 12 - 60 mm<br/>joint trimming unit: 2 x 3 kw <br/>gluing unit: a20 / a34 <br/>snipping unit: 2 x hl84/85  0,5 kw <br/>rough trimming unit: 2 x 1,5 <br/>profile trimming unit: 2 x fk11 0,5 kw <br/>edge sanding unit: fa11 <br/>edge buffing unit: ja/ yes <br/>workpiece pre heater: ja/ yes <br/>workpiece overhang: 30 mm<br/>description: homag optimat kal 310/6/a20/s2 edgebander + ligmatech zhr05 <h3>homag optimat kal 310/6/a20/s2 kantenanleimmaschine + ligmatech zhr05</h3>  homatic-elektroniksteuerung:<br> - steuerung speicherprogrammierbar (sps) - streckensteuerung integriert, zur berührungslosen steuerung der bearbeitungsaggregate <br> steuerung nc21: - echtzeitbetriebssystem os9 - bedienung mit windows-standard <br> technische daten: - vorschub 18 m/min - arbeitshöhe 950 mm - arbeitsbreite minimal: - 55 mm bei werkstückdicke 22 mm -100 mm bei werkstückdicke 60 mm (abhängig von der werkstücklänge) - werkstücküberstand 30 mm - werkstückdicke 12 - 60 mm - kantenmaterial streifen max. 0,4 - 20 mm - kantenquerschnitt streifen max. 900 mm2 - kantenmaterial rolle 0,3 - 3 mm - kantenquerschnitt max. - bei pvc 135 mm2 - bei furnier 100 mm2 - rollendurchmesser max. 830 mm - pneumatikanschluss 7-8 bar <br> fÜgefrÄsaggregat - 2 motoren je 3 kw, 150 hz., 9000 1/min - elektropneumatische steuerung des 1 motors - werkstückabblasvorrichtung <br> werkstÜckvorwÄrmung verleimteil a20 - schmelzkleberaggregat a34 - leimbehälter 5l - temperaturregelung elektronisch - aufschmelzleistung max. 8 kg/h  magazin - für massivkanten, streifenware und rollenware - zuführung der streifenware über vakuumsauger - kantenüberwachung mit automatischem vorschubstop bei fehlender kante - magazinhöhenverstellung über spindel verstellweg +/- 10 mm - rollentrenneinrichtung - druckzone c - druckeinstellung SERIAL NUMBER: 0-200-19-1438
WEIGHT APPROX.: 5000 KG
DIMENSIONS (L X W X H) APPROX.: 1X1X1 MM
FEED: 18 M/MIN
EDGE THICKNESS: 0,4 - 20 MM
WORKPIECE THICKNESS: 12 - 60 MM
JOINT TRIMMING UNIT: 2 X 3 KW
GLUING UNIT: A20 / A34
SNIPPING UNIT: 2 X HL84/85 0,5 KW
ROUGH TRIMMING UNIT: 2 X 1,5
PROFILE TRIMMING UNIT: 2 X FK11 0,5 KW
EDGE SANDING UNIT: FA11
EDGE BUFFING UNIT: JA/ YES
WORKPIECE PRE HEATER: JA/ YES
WORKPIECE OVERHANG: 30 MM
DESCRIPTION: HOMAG OPTIMAT KAL 310/6/A20/S2 EDGEBANDER + LIGMATECH ZHR05

HOMAG OPTIMAT KAL 310/6/A20/S2 KANTENANLEIMMASCHINE + LIGMATECH ZHR05

HOMATIC-ELEKTRONIKSTEUERUNG:
- STEUERUNG SPEICHERPROGRAMMIERBAR (SPS) - STRECKENSTEUERUNG INTEGRIERT, ZUR BERüHRUNGSLOSEN STEUERUNG DER BEARBEITUNGSAGGREGATE
STEUERUNG NC21: - ECHTZEITBETRIEBSSYSTEM OS9 - BEDIENUNG MIT WINDOWS-STANDARD
TECHNISCHE DATEN: - VORSCHUB 18 M/MIN - ARBEITSHöHE 950 MM - ARBEITSBREITE MINIMAL: - 55 MM BEI WERKSTüCKDICKE 22 MM -100 MM BEI WERKSTüCKDICKE 60 MM (ABHäNGIG VON DER WERKSTüCKLäNGE) - WERKSTüCKüBERSTAND 30 MM - WERKSTüCKDICKE 12 - 60 MM - KANTENMATERIAL STREIFEN MAX. 0,4 - 20 MM - KANTENQUERSCHNITT STREIFEN MAX. 900 MM2 - KANTENMATERIAL ROLLE 0,3 - 3 MM - KANTENQUERSCHNITT MAX. - BEI PVC 135 MM2 - BEI FURNIER 100 MM2 - ROLLENDURCHMESSER MAX. 830 MM - PNEUMATIKANSCHLUSS 7-8 BAR
FÜGEFRÄSAGGREGAT - 2 MOTOREN JE 3 KW, 150 HZ., 9000 1/MIN - ELEKTROPNEUMATISCHE STEUERUNG DES 1 MOTORS - WERKSTüCKABBLASVORRICHTUNG
WERKSTÜCKVORWÄRMUNG VERLEIMTEIL A20 - SCHMELZKLEBERAGGREGAT A34 - LEIMBEHäLTER 5L - TEMPERATURREGELUNG ELEKTRONISCH - AUFSCHMELZLEISTUNG MAX. 8 KG/H MAGAZIN - FüR MASSIVKANTEN, STREIFENWARE UND ROLLENWARE - ZUFüHRUNG DER STREIFENWARE üBER VAKUUMSAUGER - KANTENüBERWACHUNG MIT AUTOMATISCHEM VORSCHUBSTOP BEI FEHLENDER KANTE - MAGAZINHöHENVERSTELLUNG üBER SPINDEL VERSTELLWEG +/- 10 MM - ROLLENTRENNEINRICHTUNG - DRUCKZONE C - DRUCKEINSTELLUNG
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-serial number: 0-261-07-2549 <br/>weight approx.: 4000 kg<br/>control: power control pc 20+ <br/>dimensions (l x w x h) approx.: 7860 x 1550 x 2300 mm<br/>feed: 8 - 20 m/min<br/>edge thickness: 0,4 - 12 mm<br/>workpiece thickness: 8 - 100 mm<br/>joint trimming unit: fg 3530 (2 x 4,50 kw) <br/>gluing unit: quickmelt a34 / pur <br/>snipping unit: hl 6120 (2 x 0,35 kw) <br/>rough trimming unit: vf 6210 (2 x 0,55 kw) <br/>fine trimming unit: mf 6210 (2 x 0,55kw) <br/>profile trimming unit: ff 6270 (4 x 0,30 kw) <br/>flat scraping unit: zf 6600 <br/>profile scraping unit: mf 6500 <br/>edge buffing unit: fp 6810 <br/>refeed system: ligmatech zhr05/r/075 <br/>edge magazine with: 1 -fold roller<br/>description: <b>brandt kdf 790 edgebander with ligmatech zhr05/r/075 feedback system.</b><br> <br> versatile use by workpiece height up to 100 mm<br> <br> - extended program adjustable inlet ruler<br> - belt top pressure<br> - automatic edge feed<br> - heavy program adjustable pressure zone<br> - quick change gluing unit<br> - release agent specification workpiece SERIAL NUMBER: 0-261-07-2549
WEIGHT APPROX.: 4000 KG
CONTROL: POWER CONTROL PC 20+
DIMENSIONS (L X W X H) APPROX.: 7860 X 1550 X 2300 MM
FEED: 8 - 20 M/MIN
EDGE THICKNESS: 0,4 - 12 MM
WORKPIECE THICKNESS: 8 - 100 MM
JOINT TRIMMING UNIT: FG 3530 (2 X 4,50 KW)
GLUING UNIT: QUICKMELT A34 / PUR
SNIPPING UNIT: HL 6120 (2 X 0,35 KW)
ROUGH TRIMMING UNIT: VF 6210 (2 X 0,55 KW)
FINE TRIMMING UNIT: MF 6210 (2 X 0,55KW)
PROFILE TRIMMING UNIT: FF 6270 (4 X 0,30 KW)
FLAT SCRAPING UNIT: ZF 6600
PROFILE SCRAPING UNIT: MF 6500
EDGE BUFFING UNIT: FP 6810
REFEED SYSTEM: LIGMATECH ZHR05/R/075
EDGE MAGAZINE WITH: 1 -FOLD ROLLER
DESCRIPTION: BRANDT KDF 790 EDGEBANDER WITH LIGMATECH ZHR05/R/075 FEEDBACK SYSTEM.

VERSATILE USE BY WORKPIECE HEIGHT UP TO 100 MM

- EXTENDED PROGRAM ADJUSTABLE INLET RULER
- BELT TOP PRESSURE
- AUTOMATIC EDGE FEED
- HEAVY PROGRAM ADJUSTABLE PRESSURE ZONE
- QUICK CHANGE GLUING UNIT
- RELEASE AGENT SPECIFICATION WORKPIECE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: ligmatech, type: profi td/31/25/12, year: ca.2004, control: siemens, turning device: wendevorrichtung, working length max mm: 2800, working widht max mm: 1300, feeding speed max m/min: 10-30, feeding speed continous adjustable: yes, headroom adjustable: yes, roller diameter mm: 80, working hight mm: +-900, engine power kw: 6, dimensions l x w x h mm: 6200 x 2800, free text: fahrbar rolle, year :ca.2004 MANUFACTURER: LIGMATECH, TYPE: PROFI TD/31/25/12, YEAR: CA.2004, CONTROL: SIEMENS, TURNING DEVICE: WENDEVORRICHTUNG, WORKING LENGTH MAX MM: 2800, WORKING WIDHT MAX MM: 1300, FEEDING SPEED MAX M/MIN: 10-30, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, HEADROOM ADJUSTABLE: YES, ROLLER DIAMETER MM: 80, WORKING HIGHT MM: +-900, ENGINE POWER KW: 6, DIMENSIONS L X W X H MM: 6200 X 2800, FREE TEXT: FAHRBAR ROLLE, YEAR :CA.2004
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: limatech, type: mps 20, year: 1998, work piece width min-max mm: 800, min.-max. workpiece length in mm: 2500, min.-max. workpiece height in mm: 1300, feeding speed max m/min: ca. 30, feeding speed continous adjustable: yes, machine rigging: automatisch, compressed air bar: 6, wight approx. kg: 3000, year :1998 MANUFACTURER: LIMATECH, TYPE: MPS 20, YEAR: 1998, WORK PIECE WIDTH MIN-MAX MM: 800, MIN.-MAX. WORKPIECE LENGTH IN MM: 2500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 1300, FEEDING SPEED MAX M/MIN: CA. 30, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, MACHINE RIGGING: AUTOMATISCH, COMPRESSED AIR BAR: 6, WIGHT APPROX. KG: 3000, YEAR :1998
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: ligmatech, type: stapelmat zhk 10, year: 1990, control: ligmatech, work piece width min-max mm: 140-800, min.-max. workpiece length in mm: 160-1200, min.-max. workpiece height in mm: 10-60, year :1990 MANUFACTURER: LIGMATECH, TYPE: STAPELMAT ZHK 10, YEAR: 1990, CONTROL: LIGMATECH, WORK PIECE WIDTH MIN-MAX MM: 140-800, MIN.-MAX. WORKPIECE LENGTH IN MM: 160-1200, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, YEAR :1990
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: ligmatech  korpussaufrichter, type: mtk 10, year: 1999, control: yes, corpus length max mm: 2200, working hight mm: ca.500, pneumatical: yes, rollentransport: yes, single machine: yes, total lenght: 2500, working hight adjustable mm: yes, pneumatischer korpussaufrichter, year :1999 MANUFACTURER: LIGMATECH KORPUSSAUFRICHTER, TYPE: MTK 10, YEAR: 1999, CONTROL: YES, CORPUS LENGTH MAX MM: 2200, WORKING HIGHT MM: CA.500, PNEUMATICAL: YES, ROLLENTRANSPORT: YES, SINGLE MACHINE: YES, TOTAL LENGHT: 2500, WORKING HIGHT ADJUSTABLE MM: YES, PNEUMATISCHER KORPUSSAUFRICHTER, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: ligmatech, type: td/31/25/12, year: 1997, control: siemens, turning device: wendevorrichtung, working length max mm: 2800, working widht max mm: 1300, feeding speed max m/min: 10-30, feeding speed continous adjustable: yes, headroom adjustable: yes, roller diameter mm: 80, working hight mm: +-900, engine power kw: 6, dimensions l x w x h mm: 6200 x 2800, free text: fahrbar rolle, year :1997 MANUFACTURER: LIGMATECH, TYPE: TD/31/25/12, YEAR: 1997, CONTROL: SIEMENS, TURNING DEVICE: WENDEVORRICHTUNG, WORKING LENGTH MAX MM: 2800, WORKING WIDHT MAX MM: 1300, FEEDING SPEED MAX M/MIN: 10-30, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, HEADROOM ADJUSTABLE: YES, ROLLER DIAMETER MM: 80, WORKING HIGHT MM: +-900, ENGINE POWER KW: 6, DIMENSIONS L X W X H MM: 6200 X 2800, FREE TEXT: FAHRBAR ROLLE, YEAR :1997
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 5000 kg<br/>control: power control pc 20+ <br/>dimensions (l x w x h) approx.: 13500 x 2500 x 2700 mm<br/>feed: 8 - 20 m/min<br/>edge thickness: 0,4 - 12 mm<br/>workpiece thickness: 8 - 60 mm<br/>joint trimming unit: 2 x 2,2 kw <br/>gluing unit: quickmelt a20 <br/>snipping unit: 2 x 0,35 kw <br/>rough trimming unit: 2 x 0,55 kw <br/>profile trimming unit: mf 60 servotrim (2 x 0,4 kw) <br/>flat scraping unit: ja / yes <br/>profile scraping unit: ja / yes <br/>edge buffing unit: ja / yes <br/>refeed system: ligmatech zhr 01/r/065 <br/>edge magazine with: 1 -fold roller<br/>description: <b>very well-kept and high-end equipped brandt kdf 880 profi edgebander with top pressure belt and including ligmatech zhr 01/r/065 (yom 2004) feedback system.</b><br>  <br>  <b>technical data and equipment:</b><br>  - top pressure height adjustment motor-driven and with top pressure belt<br>  - extension infeed fence by 300 mm and with motor-driven adjustment<br>  - release agent spray unit<br>  - automatic edge pull-in<br>  - pressure zone with motor-driven adjustment<br>  - trimming unit with pneumatic adjustment chamfer/straight<br>  - milling unit with motor-driven axis adjustment<br>  - milling unit with multiple roller keying<br>  - multifunctional shaping cutter unit mf 60 servotrim with hsk 25<br>  - mf 60 servo-driven movement sequence with soft-touch function<br>  <br>  (the availability of the used brandt - ligmatech depends on the delivery of the new machine!) WEIGHT APPROX.: 5000 KG
CONTROL: POWER CONTROL PC 20+
DIMENSIONS (L X W X H) APPROX.: 13500 X 2500 X 2700 MM
FEED: 8 - 20 M/MIN
EDGE THICKNESS: 0,4 - 12 MM
WORKPIECE THICKNESS: 8 - 60 MM
JOINT TRIMMING UNIT: 2 X 2,2 KW
GLUING UNIT: QUICKMELT A20
SNIPPING UNIT: 2 X 0,35 KW
ROUGH TRIMMING UNIT: 2 X 0,55 KW
PROFILE TRIMMING UNIT: MF 60 SERVOTRIM (2 X 0,4 KW)
FLAT SCRAPING UNIT: JA / YES
PROFILE SCRAPING UNIT: JA / YES
EDGE BUFFING UNIT: JA / YES
REFEED SYSTEM: LIGMATECH ZHR 01/R/065
EDGE MAGAZINE WITH: 1 -FOLD ROLLER
DESCRIPTION: VERY WELL-KEPT AND HIGH-END EQUIPPED BRANDT KDF 880 PROFI EDGEBANDER WITH TOP PRESSURE BELT AND INCLUDING LIGMATECH ZHR 01/R/065 (YOM 2004) FEEDBACK SYSTEM.

TECHNICAL DATA AND EQUIPMENT:
- TOP PRESSURE HEIGHT ADJUSTMENT MOTOR-DRIVEN AND WITH TOP PRESSURE BELT
- EXTENSION INFEED FENCE BY 300 MM AND WITH MOTOR-DRIVEN ADJUSTMENT
- RELEASE AGENT SPRAY UNIT
- AUTOMATIC EDGE PULL-IN
- PRESSURE ZONE WITH MOTOR-DRIVEN ADJUSTMENT
- TRIMMING UNIT WITH PNEUMATIC ADJUSTMENT CHAMFER/STRAIGHT
- MILLING UNIT WITH MOTOR-DRIVEN AXIS ADJUSTMENT
- MILLING UNIT WITH MULTIPLE ROLLER KEYING
- MULTIFUNCTIONAL SHAPING CUTTER UNIT MF 60 SERVOTRIM WITH HSK 25
- MF 60 SERVO-DRIVEN MOVEMENT SEQUENCE WITH SOFT-TOUCH FUNCTION

(THE AVAILABILITY OF THE USED BRANDT - LIGMATECH DEPENDS ON THE DELIVERY OF THE NEW MACHINE!)
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-serial number: 0-200-01-1384 <br/>weight approx.: 6000 kg<br/>control: pc22 <br/>dimensions (l x w x h) approx.: 13000 x 2300 x 2300 mm<br/>feed: 18 - 25 m/min<br/>edge thickness: 0,4 - 3 mm<br/>workpiece thickness: 8 - 60 mm<br/>joint trimming unit: 2 x 3,0 kw <br/>gluing unit: a3 / quickmelt / c <br/>snipping unit: hl84 (2 x 0,22 kw) <br/>rough trimming unit: 2 x 0,55 kw <br/>profile trimming unit: fk11 (2 x 0,4 kw) <br/>flat scraping unit: ja / yes <br/>profile scraping unit: ja / yes <br/>edge buffing unit: ja / yes <br/>edge magazine with: 6 -fold roller<br/>workpiece overhang: 30 mm<br/>description: homag profi kal 310/7/a3 edgebander<br> <br> further equipment:<br> - release agent spraying unit<br> - servo edge feeding<br> <br> (the ligmatech return system is not included!) SERIAL NUMBER: 0-200-01-1384
WEIGHT APPROX.: 6000 KG
CONTROL: PC22
DIMENSIONS (L X W X H) APPROX.: 13000 X 2300 X 2300 MM
FEED: 18 - 25 M/MIN
EDGE THICKNESS: 0,4 - 3 MM
WORKPIECE THICKNESS: 8 - 60 MM
JOINT TRIMMING UNIT: 2 X 3,0 KW
GLUING UNIT: A3 / QUICKMELT / C
SNIPPING UNIT: HL84 (2 X 0,22 KW)
ROUGH TRIMMING UNIT: 2 X 0,55 KW
PROFILE TRIMMING UNIT: FK11 (2 X 0,4 KW)
FLAT SCRAPING UNIT: JA / YES
PROFILE SCRAPING UNIT: JA / YES
EDGE BUFFING UNIT: JA / YES
EDGE MAGAZINE WITH: 6 -FOLD ROLLER
WORKPIECE OVERHANG: 30 MM
DESCRIPTION: HOMAG PROFI KAL 310/7/A3 EDGEBANDER

FURTHER EQUIPMENT:
- RELEASE AGENT SPRAYING UNIT
- SERVO EDGE FEEDING

(THE LIGMATECH RETURN SYSTEM IS NOT INCLUDED!)
Vendedor: Surplex GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more LIGMATECH types: