14 ofertas

Año de construcción: usado
Ubicación: Land-complete non-ferrous separation line dry and wet, equipped with:- charging bin- overbelt magnets- driple screen drum, lindemann- 3x eddy current separators, steinert nes- 2x titech (tomra) finders- hand-picking stationswemco heavy media installation double linecomplete line capacity 35.000 t/y, in 1-1.5 shifts.installation is still operational, well maintained and in good working condition. dry line installed in 2010, hms line 30 years ago.      COMPLETE NON-FERROUS SEPARATION LINE DRY AND WET, EQUIPPED WITH:- CHARGING BIN- OVERBELT MAGNETS- DRIPLE SCREEN DRUM, LINDEMANN- 3X EDDY CURRENT SEPARATORS, STEINERT NES- 2X TITECH (TOMRA) FINDERS- HAND-PICKING STATIONSWEMCO HEAVY MEDIA INSTALLATION DOUBLE LINECOMPLETE LINE CAPACITY 35.000 T/Y, IN 1-1.5 SHIFTS.INSTALLATION IS STILL OPERATIONAL, WELL MAINTAINED AND IN GOOD WORKING CONDITION. DRY LINE INSTALLED IN 2010, HMS LINE 30 YEARS AGO.
Vendedor: Klann Anlagentechnik GmbH
Año de construcción: usado
Precio: 22.500 €
Ubicación: Land-manufacturer lindemann<br/>typ bimax 12/110 k<br/>year of construction 1993<br/>hours of operation 34.887 h<br/>press power main press 120 tons<br/>press power free stamper 24 tons<br/>specific press capacity 9,91 kg/cm²<br/>feed channel 2,000 / 1,400 x 1,040 mm (l x w)<br/>bale size 1,100 x 1,100 mm (w x h) length adjustable<br/>driving motor 3 x 45 kw<br/>tying system 5-fold vertical, 3-fold horizontal, fully automated<br/>throughput rate at a  <br/>bulk weight of 30 kg/cbm approx. 10 up tp 12 tons/h<br/>bulk weight of 50 kg/cbm approx. 18 up to 26 tons/h<br/>bulk weight of 100 kg/cbm approx. 28 up to 40 tons/h<br/>bale weight 650 up to 950 kg<br/>volume hydraulic oil tank 2,500 l<br/>transport dimensions only baler approx. 11,800 x 2,400 x 3,550 mm (l x w x h)<br/>machine weight baler 35 tons<br/>accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.)  ruffler, 15 kw<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER LINDEMANN
TYP BIMAX 12/110 K
YEAR OF CONSTRUCTION 1993
HOURS OF OPERATION 34.887 H
PRESS POWER MAIN PRESS 120 TONS
PRESS POWER FREE STAMPER 24 TONS
SPECIFIC PRESS CAPACITY 9,91 KG/CM²
FEED CHANNEL 2,000 / 1,400 X 1,040 MM (L X W)
BALE SIZE 1,100 X 1,100 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 3 X 45 KW
TYING SYSTEM 5-FOLD VERTICAL, 3-FOLD HORIZONTAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 10 UP TP 12 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 18 UP TO 26 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 28 UP TO 40 TONS/H
BALE WEIGHT 650 UP TO 950 KG
VOLUME HYDRAULIC OIL TANK 2,500 L
TRANSPORT DIMENSIONS ONLY BALER APPROX. 11,800 X 2,400 X 3,550 MM (L X W X H)
MACHINE WEIGHT BALER 35 TONS
ACCESSORIES (RUFFLER, PRE-COMPRESSOR, PERFORATOR, CONVEYOR BELT, ETC.) RUFFLER, 15 KW

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-foot operated
wheels
overhauled

manufacturer: lindemann knife length: 406 mm
weight: 1070 kg
drive: 7,5 kw / 400 v
control: foot pedal
 FOOT OPERATED WHEELS OVERHAULED MANUFACTURER: LINDEMANN KNIFE LENGTH: 406 MM WEIGHT: 1070 KG DRIVE: 7,5 KW / 400 V CONTROL: FOOT PEDAL
Vendedor: Diebels GbR, Recyclingmaschinen
Año de construcción: usado
Precio: 26.500 €
Ubicación: Land-manufacturer lindemann<br/>typ bigro 1027 v<br/>year of construction 1989<br/>press power main press 100 tons<br/>specific press capacity 12,1 kg/cm²<br/>press power free stamper 24 tons<br/>feed channel 1,060 x 1,400 / 2,000 mm (l x w)<br/>bale size 1,100 x 750 mm (w x h) length adjustable<br/>driving motor 2 x 55 kw<br/>connected load 138 kw<br/>tying system 4-fold vertical, fully automated<br/>throughput rate at a  <br/>bulk weight of 20 up to 30 kg/cbm approx. 8 up to 11 to/h<br/>bulk weight of 40 up to 60 kg/cbm approx. 13 up to 16 to/h<br/>bulk weight of 70  up to 100 kg/cbm approx. 19 up to 23 to/h<br/>bale weight 520 up to 720 kg depending on material<br/>volume hydraulic oil tank 2,700 l<br/>sps controller (manuf., type) siemens s5 115 u cpu 941 with e-prom<br/>baler dimensions built up with hopper approx. 11,750 x 2,530 x 3,720 mm (l x w x h)<br/>transport dimensions only baler approx. 11,750 x 2,530 x 2,450 mm (l x w x h)<br/>machine weight baler approx. 26 tons<br/>accessories (ruffler, pre-compressor, perforator, conveyor belt, etc.)  ruffler with adjustable feed channel length 1,400 up to 2,000 mm<br/>condition of the baler, conveyor belt good condition for this age. baler is actual in working condition.<br/> <br/>comments: inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.<br/> <br/>technical data conveyor belt <br/>manufacturer ama werke<br/>typ kgf 2000-20750<br/>year of construction 05/2006<br/>length feeding conveyor 9,800 mm<br/>effecting width 1,910 mm<br/>height drive axle over ground approx. 4,000 mm<br/>height of side wall feeding conv. 600 mm<br/>height of side wall elevating conv. 800 mm MANUFACTURER LINDEMANN
TYP BIGRO 1027 V
YEAR OF CONSTRUCTION 1989
PRESS POWER MAIN PRESS 100 TONS
SPECIFIC PRESS CAPACITY 12,1 KG/CM²
PRESS POWER FREE STAMPER 24 TONS
FEED CHANNEL 1,060 X 1,400 / 2,000 MM (L X W)
BALE SIZE 1,100 X 750 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 2 X 55 KW
CONNECTED LOAD 138 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 UP TO 30 KG/CBM APPROX. 8 UP TO 11 TO/H
BULK WEIGHT OF 40 UP TO 60 KG/CBM APPROX. 13 UP TO 16 TO/H
BULK WEIGHT OF 70 UP TO 100 KG/CBM APPROX. 19 UP TO 23 TO/H
BALE WEIGHT 520 UP TO 720 KG DEPENDING ON MATERIAL
VOLUME HYDRAULIC OIL TANK 2,700 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS S5 115 U CPU 941 WITH E-PROM
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 11,750 X 2,530 X 3,720 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 11,750 X 2,530 X 2,450 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 26 TONS
ACCESSORIES (RUFFLER, PRE-COMPRESSOR, PERFORATOR, CONVEYOR BELT, ETC.) RUFFLER WITH ADJUSTABLE FEED CHANNEL LENGTH 1,400 UP TO 2,000 MM
CONDITION OF THE BALER, CONVEYOR BELT GOOD CONDITION FOR THIS AGE. BALER IS ACTUAL IN WORKING CONDITION.

COMMENTS: INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

TECHNICAL DATA CONVEYOR BELT
MANUFACTURER AMA WERKE
TYP KGF 2000-20750
YEAR OF CONSTRUCTION 05/2006
LENGTH FEEDING CONVEYOR 9,800 MM
EFFECTING WIDTH 1,910 MM
HEIGHT DRIVE AXLE OVER GROUND APPROX. 4,000 MM
HEIGHT OF SIDE WALL FEEDING CONV. 600 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 27.500 €
Ubicación: Land-semi-automatic channel baling press lindemann blt 614/55
price: 27 500 euro’s (netto price)
the machine is used, but in very good condition. it works perfect, available to be sold every moment. 
if you have any another questions, don’t hesitate to contact us!
telephone: +48 783 891 132 or e-mail adress: biuro@bartontech.pl  / bartontech.eu@gmail.com
our webpage: abc.bartontech.eu 
 SEMI-AUTOMATIC CHANNEL BALING PRESS LINDEMANN BLT 614/55 PRICE: 27 500 EURO’S (NETTO PRICE) THE MACHINE IS USED, BUT IN VERY GOOD CONDITION. IT WORKS PERFECT, AVAILABLE TO BE SOLD EVERY MOMENT. IF YOU HAVE ANY ANOTHER QUESTIONS, DON’T HESITATE TO CONTACT US! TELEPHONE: +48 783 891 132 OR E-MAIL ADRESS: BIURO@BARTONTECH.PL / BARTONTECH.EU@GMAIL.COM OUR WEBPAGE: ABC.BARTONTECH.EU
Vendedor: Bartontech
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand extrusion press including hydraulic unit & billet furnace
trade mark: 	lindeman	type:	back loading standard		original year: 	1972
1rst revamping: 	by omav in 1988		2nd revamping: 	by clecim in 2003
3rd revamping: 	by electric sogema in 2010
force: 		max 2000 mt at 310 bar		nominal force:	1800 mt at 280 bar
billet dia.:	7.5 inches – 193 mm		billet length:		max. 790 mm
 QTY. 1 SECOND-HAND EXTRUSION PRESS INCLUDING HYDRAULIC UNIT & BILLET FURNACE TRADE MARK: LINDEMAN TYPE: BACK LOADING STANDARD ORIGINAL YEAR: 1972 1RST REVAMPING: BY OMAV IN 1988 2ND REVAMPING: BY CLECIM IN 2003 3RD REVAMPING: BY ELECTRIC SOGEMA IN 2010 FORCE: MAX 2000 MT AT 310 BAR NOMINAL FORCE: 1800 MT AT 280 BAR BILLET DIA.: 7.5 INCHES – 193 MM BILLET LENGTH: MAX. 790 MM
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-stock number: u2245
used carbon steel hammer mill by lindemann (germany) type pza8-55s. machine has feeding inlet with dimensions length 1010 mm x width 660 mm x depth 450 mm. milling chamber has dimensions: length 1430 mm x width 550 mm. inside the milling chamber is installed rotor with diameter 800 mm x width 550 mm. on the rotor there are 4 shafts with hammers. each shaft has installed 14 hammers. total number of hammers is 56 pcs. each hammer has thickness 10 mm. bottom discharge of product. side doors with static knives from both sides of rotor are operated hydraulically. rotor is directly driven by electric motor 75 kw, 1480 rpm, 380 v, 50 hz. machine is mounted on carbon steel frame with three rubber supports.   STOCK NUMBER: U2245 USED CARBON STEEL HAMMER MILL BY LINDEMANN (GERMANY) TYPE PZA8-55S. MACHINE HAS FEEDING INLET WITH DIMENSIONS LENGTH 1010 MM X WIDTH 660 MM X DEPTH 450 MM. MILLING CHAMBER HAS DIMENSIONS: LENGTH 1430 MM X WIDTH 550 MM. INSIDE THE MILLING CHAMBER IS INSTALLED ROTOR WITH DIAMETER 800 MM X WIDTH 550 MM. ON THE ROTOR THERE ARE 4 SHAFTS WITH HAMMERS. EACH SHAFT HAS INSTALLED 14 HAMMERS. TOTAL NUMBER OF HAMMERS IS 56 PCS. EACH HAMMER HAS THICKNESS 10 MM. BOTTOM DISCHARGE OF PRODUCT. SIDE DOORS WITH STATIC KNIVES FROM BOTH SIDES OF ROTOR ARE OPERATED HYDRAULICALLY. ROTOR IS DIRECTLY DRIVEN BY ELECTRIC MOTOR 75 KW, 1480 RPM, 380 V, 50 HZ. MACHINE IS MOUNTED ON CARBON STEEL FRAME WITH THREE RUBBER SUPPORTS.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Ubicación: Land-automatic baler manufacturer: lindemann

type: bigro
 
technical data:
pressing force: 80 t
filler: 1,600 x 1,000 mm
channel format: 800 x 1100 mm
power: 2 x 22 kw optional with:
 
press feed conveyor
conveyor width: 1,200 mm
task length: 800 mm       AUTOMATIC BALER MANUFACTURER: LINDEMANN TYPE: BIGRO TECHNICAL DATA: PRESSING FORCE: 80 T FILLER: 1,600 X 1,000 MM CHANNEL FORMAT: 800 X 1100 MM POWER: 2 X 22 KW OPTIONAL WITH: PRESS FEED CONVEYOR CONVEYOR WIDTH: 1,200 MM TASK LENGTH: 800 MM
Vendedor: Brauner Recyclingtech GmbH
Año de construcción: usado
Ubicación: Land-lindemann 400 alligator shears
 blade length: 406 mm
 drive: 7,5 kw
 weight: 1070 kg
 foot operated
 wheels and truck intake
 overhaul   LINDEMANN 400 ALLIGATOR SHEARS BLADE LENGTH: 406 MM DRIVE: 7,5 KW WEIGHT: 1070 KG FOOT OPERATED WHEELS AND TRUCK INTAKE OVERHAUL
Vendedor: Diebels GbR, Recyclingmaschinen
Año de construcción: usado
Ubicación: Land-the year is unknown. 

manufacturer: lindemann drive: 22 kw package size: 30 x 30 x quantity box length: 1,15 m case width: 0.63 meters box depth: 0.70 metres of floor space: 8.5 meters x 4 meters machine is partially overhauled: controller was sealed cover fold-out cylinder was sealed lid has been stored new and new bolts made knife on the lid and on the box have been replaced _

the productionyear is unknown. 

manufacturer: lindemann drive: 22 kw package dimension: 30 x 30 x amount of material box length: 1.15 meters box width: 0.63 meters box depth: 0.70 meters floor space: 8.5 meters x 4 meters machine partly overhauled is: controller what sealed cover flap cylinder what sealed cover flap which stored and newly made new stud blades at the top flap and the box new     THE YEAR IS UNKNOWN. MANUFACTURER: LINDEMANN DRIVE: 22 KW PACKAGE SIZE: 30 X 30 X QUANTITY BOX LENGTH: 1,15 M CASE WIDTH: 0.63 METERS BOX DEPTH: 0.70 METRES OF FLOOR SPACE: 8.5 METERS X 4 METERS MACHINE IS PARTIALLY OVERHAULED: CONTROLLER WAS SEALED COVER FOLD-OUT CYLINDER WAS SEALED LID HAS BEEN STORED NEW AND NEW BOLTS MADE KNIFE ON THE LID AND ON THE BOX HAVE BEEN REPLACED _ THE PRODUCTIONYEAR IS UNKNOWN. MANUFACTURER: LINDEMANN DRIVE: 22 KW PACKAGE DIMENSION: 30 X 30 X AMOUNT OF MATERIAL BOX LENGTH: 1.15 METERS BOX WIDTH: 0.63 METERS BOX DEPTH: 0.70 METERS FLOOR SPACE: 8.5 METERS X 4 METERS MACHINE PARTLY OVERHAULED IS: CONTROLLER WHAT SEALED COVER FLAP CYLINDER WHAT SEALED COVER FLAP WHICH STORED AND NEWLY MADE NEW STUD BLADES AT THE TOP FLAP AND THE BOX NEW
Vendedor: Diebels GbR, Recyclingmaschinen
Año de construcción: usado
Ubicación: Land-channel baling presses lindemann
type bimax bj 1974.
last overhaul 1994 el. power 5 x 22 kw production output power up to 25-30to/h max pressure 300 bar pressure 100to bale dimension 1100 x 1000 x 1300-1500 bale weight 510-780 kg setting steel wire 5 x 3, 1 mm with conveyor belts and paper opener.
very good condition.
with conveyors and paper opener.
very good condition.

contact us by mail unter:rerec@web.de
or mobile: 0049 160 96232593
       CHANNEL BALING PRESSES LINDEMANN TYPE BIMAX BJ 1974. LAST OVERHAUL 1994 EL. POWER 5 X 22 KW PRODUCTION OUTPUT POWER UP TO 25-30TO/H MAX PRESSURE 300 BAR PRESSURE 100TO BALE DIMENSION 1100 X 1000 X 1300-1500 BALE WEIGHT 510-780 KG SETTING STEEL WIRE 5 X 3, 1 MM WITH CONVEYOR BELTS AND PAPER OPENER. VERY GOOD CONDITION. WITH CONVEYORS AND PAPER OPENER. VERY GOOD CONDITION. CONTACT US BY MAIL UNTER:REREC@WEB.DE OR MOBILE: 0049 160 96232593
Vendedor: Reinhard
Año de construcción: usado
Ubicación: Land-company lindemann			
type luneu nh 36			
year 1974; 2009 overhauled			
cutting width mm 1.000	
force maincylinder kn 3.000	
down holder force kn 500	
capacity t 3-6	
power kw 50	
filling bed m x m 3,6 x ,95	
machine weight ca. to 40	
place austria			
price ready for use, fca /on request					
available immediately
ready for use COMPANY LINDEMANN TYPE LUNEU NH 36 YEAR 1974; 2009 OVERHAULED CUTTING WIDTH MM 1.000 FORCE MAINCYLINDER KN 3.000 DOWN HOLDER FORCE KN 500 CAPACITY T 3-6 POWER KW 50 FILLING BED M X M 3,6 X ,95 MACHINE WEIGHT CA. TO 40 PLACE AUSTRIA PRICE READY FOR USE, FCA /ON REQUEST AVAILABLE IMMEDIATELY READY FOR USE
Vendedor: ATM Recyclingsystems GmbH
Año de construcción: usado
Ubicación: Land-company sawes 8 lindemann		
type sawes 8		
year 1969		
bale size mm 300 x 300 
force 1 step kn	1500
force 2 step kn	1500
force 3 step kn	2000
capacity:				
steel kg/std. 8000 - 10000
aluminium kg/std. 5000 - 7000
driving power kw 90
arrangement surface m x m 12 x 6 x 4,5
machine weight to 38t
press box opening m x m	1,5 x 1
location austria
automatic	
 COMPANY SAWES 8 LINDEMANN TYPE SAWES 8 YEAR 1969 BALE SIZE MM 300 X 300 FORCE 1 STEP KN 1500 FORCE 2 STEP KN 1500 FORCE 3 STEP KN 2000 CAPACITY: STEEL KG/STD. 8000 - 10000 ALUMINIUM KG/STD. 5000 - 7000 DRIVING POWER KW 90 ARRANGEMENT SURFACE M X M 12 X 6 X 4,5 MACHINE WEIGHT TO 38T PRESS BOX OPENING M X M 1,5 X 1 LOCATION AUSTRIA AUTOMATIC
Vendedor: ATM Recyclingsystems GmbH
Año de construcción: usado
Ubicación: Land-construction year 1966
bale size mm200x300
force 1 step kn 1,000
force 2 step kn 1,000
steel 1500-2500 kg
aluminium 800-1500 kg
driving power kw 22
arrangement surface 4 x 4 x 2m
machine weight to 7

automatic
control panel sps mitsubishi
including a new hopper
inspection possible  CONSTRUCTION YEAR 1966 BALE SIZE MM200X300 FORCE 1 STEP KN 1,000 FORCE 2 STEP KN 1,000 STEEL 1500-2500 KG ALUMINIUM 800-1500 KG DRIVING POWER KW 22 ARRANGEMENT SURFACE 4 X 4 X 2M MACHINE WEIGHT TO 7 AUTOMATIC CONTROL PANEL SPS MITSUBISHI INCLUDING A NEW HOPPER INSPECTION POSSIBLE
Vendedor: ATM Recyclingsystems GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more LINDEMANN types: