21 ofertas

Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-wibrorynna

technical parameters:

-wood chip technology

-inlet width 400 mm
-inlet height 140 mm
-2 knives

-sieve with dimensions of 60 mm x 90 mm
-main engine power 33 kw
-2 motors feed 2 x 1.5 kw
-the rotor length 400 mm
-rotor diameter 450 mm

-the feed rollers in good condition
-wibrorynna
-the length of the tray 4900 mm
overall dimensions:

-length of 9000 mm
– width 2100 mm
-height 1500 mm

-weight approx. 2000 kg

the main features of the machine:

* robust construction
* austrian production lindner
the commendable
* for each professional -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -WIBRORYNNA TECHNICAL PARAMETERS: -WOOD CHIP TECHNOLOGY -INLET WIDTH 400 MM -INLET HEIGHT 140 MM -2 KNIVES -SIEVE WITH DIMENSIONS OF 60 MM X 90 MM -MAIN ENGINE POWER 33 KW -2 MOTORS FEED 2 X 1.5 KW -THE ROTOR LENGTH 400 MM -ROTOR DIAMETER 450 MM -THE FEED ROLLERS IN GOOD CONDITION -WIBRORYNNA -THE LENGTH OF THE TRAY 4900 MM OVERALL DIMENSIONS: -LENGTH OF 9000 MM – WIDTH 2100 MM -HEIGHT 1500 MM -WEIGHT APPROX. 2000 KG THE MAIN FEATURES OF THE MACHINE: * ROBUST CONSTRUCTION * AUSTRIAN PRODUCTION LINDNER THE COMMENDABLE * FOR EACH PROFESSIONAL
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-weight approx.: 8000 kg<br/>dimensions (l x w x h) approx.: 5000 x 2200 x 2500 mm<br/>description: grinding wheel Ø 350 mm max. width of grinding wheel 40 mm grinding table: swivable 25° total power requirement 21 kw weight of the machine ca. 8 t dimensions of the machine ca. 4300 x 2050 x 1820 mm centre distance 1200 mm threading length bei steigungswinkel 25 grad recht 850 mm threading length bei steigungswinkel 25 grad links 865 mm table travel max 920 mm grinding dia min rotary grinding 0 - 200 mm grinding dia rotary grinding 200 mm max. workpiece diameter 220 mm height of centres der maschine 1060 mm profile depth 28 ( modul 12) mm pivoting angle of timing disk 25 grad rechts und links ° dist. grinding spindle - clamping device min 136 mm dist. grinding spindle - clamping device max 276 mm grinding wheel hole diameter 160 mm rapid return speed 30 mm peripheral speed 35 m/sec turning speeds 1910 u/min relief of the tap max 6 mm WEIGHT APPROX.: 8000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2200 X 2500 MM
DESCRIPTION: GRINDING WHEEL Ø 350 MM MAX. WIDTH OF GRINDING WHEEL 40 MM GRINDING TABLE: SWIVABLE 25° TOTAL POWER REQUIREMENT 21 KW WEIGHT OF THE MACHINE CA. 8 T DIMENSIONS OF THE MACHINE CA. 4300 X 2050 X 1820 MM CENTRE DISTANCE 1200 MM THREADING LENGTH BEI STEIGUNGSWINKEL 25 GRAD RECHT 850 MM THREADING LENGTH BEI STEIGUNGSWINKEL 25 GRAD LINKS 865 MM TABLE TRAVEL MAX 920 MM GRINDING DIA MIN ROTARY GRINDING 0 - 200 MM GRINDING DIA ROTARY GRINDING 200 MM MAX. WORKPIECE DIAMETER 220 MM HEIGHT OF CENTRES DER MASCHINE 1060 MM PROFILE DEPTH 28 ( MODUL 12) MM PIVOTING ANGLE OF TIMING DISK 25 GRAD RECHTS UND LINKS ° DIST. GRINDING SPINDLE - CLAMPING DEVICE MIN 136 MM DIST. GRINDING SPINDLE - CLAMPING DEVICE MAX 276 MM GRINDING WHEEL HOLE DIAMETER 160 MM RAPID RETURN SPEED 30 MM PERIPHERAL SPEED 35 M/SEC TURNING SPEEDS 1910 U/MIN RELIEF OF THE TAP MAX 6 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-inlet width 500 mm. intake height 180 mm. 4 piece-feed rollers. 2 piece feed gear box with the 4.0 kw. rotor with 2 knives. screen 45 x 55 mm. 
drive motor 37 kw belt. damper. electric control cabinet with control. steel substructure.
 INLET WIDTH 500 MM. INTAKE HEIGHT 180 MM. 4 PIECE-FEED ROLLERS. 2 PIECE FEED GEAR BOX WITH THE 4.0 KW. ROTOR WITH 2 KNIVES. SCREEN 45 X 55 MM. DRIVE MOTOR 37 KW BELT. DAMPER. ELECTRIC CONTROL CABINET WITH CONTROL. STEEL SUBSTRUCTURE.
Vendedor: Rodenbach + Wolf GmbH & Co. KG
Año de construcción: usado
Precio: 14.900 €
Ubicación: Land-; gross weight [kg]: 18000; transmission: sonstige; front tyre size: 385/65r22.5; rear tyre size: 385/65r22.5; accessories: abs; colour: weiß; suspension type: luft/luft; max payload [kg]: 14600 ; GROSS WEIGHT [KG]: 18000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 385/65R22.5; REAR TYRE SIZE: 385/65R22.5; ACCESSORIES: ABS; COLOUR: WEIß; SUSPENSION TYPE: LUFT/LUFT; MAX PAYLOAD [KG]: 14600
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-vibrotable width 7 m, length 12 m  VIBROTABLE WIDTH 7 M, LENGTH 12 M
Vendedor: Heindl Handels GmbH
Año de construcción: usado
Ubicación: Land-workpiece diameter: 1 - 25 mm<br/>threading length: 90 mm<br/>thread pitch: 0,125 - 4 mm<br/>spindle turning speed range: 1340 , 1520 u/min<br/>clamping length max.: 190 mm<br/>workpiece turning speeds: 5 - 150 u/min<br/>max. dia. of grinding wheel: 375 - 500 mm<br/>no. of t-slots: 1 - 4 stück<br/>total power requirement: 7,2 kw<br/>weight of the machine ca.: 1,8 t<br/>dimensions of the machine ca.: 1,8 x 1,4 x 1,6 m<br/><br/><br/><br/><br/> WORKPIECE DIAMETER: 1 - 25 MM
THREADING LENGTH: 90 MM
THREAD PITCH: 0,125 - 4 MM
SPINDLE TURNING SPEED RANGE: 1340 , 1520 U/MIN
CLAMPING LENGTH MAX.: 190 MM
WORKPIECE TURNING SPEEDS: 5 - 150 U/MIN
MAX. DIA. OF GRINDING WHEEL: 375 - 500 MM
NO. OF T-SLOTS: 1 - 4 STüCK
TOTAL POWER REQUIREMENT: 7,2 KW
WEIGHT OF THE MACHINE CA.: 1,8 T
DIMENSIONS OF THE MACHINE CA.: 1,8 X 1,4 X 1,6 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-long discharge conveyor, hakenmobil, 2.700bh, schredder lindner urraco 75 d bj. 2014 good car operative state.
shredder lindner urraco 75 d built in 2014 2,700 working hours, hook lift frame, long conveyour.
good conditon now available.

contact at: rerec@web.d
or mobile: 0049 160 96232593 LONG DISCHARGE CONVEYOR, HAKENMOBIL, 2.700BH, SCHREDDER LINDNER URRACO 75 D BJ. 2014 GOOD CAR OPERATIVE STATE. SHREDDER LINDNER URRACO 75 D BUILT IN 2014 2,700 WORKING HOURS, HOOK LIFT FRAME, LONG CONVEYOUR. GOOD CONDITON NOW AVAILABLE. CONTACT AT: REREC@WEB.D OR MOBILE: 0049 160 96232593
Vendedor: Reinhard
Año de construcción: usado
Precio: 64.400 EU?
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-extraction chain  belt (lindner)

manufacturer: lindner
4.350 mm long
with central chain transport and paddles
flat type on supports
stainless steel structure
5 kw motor + gearbox
construction year 2013
500 mm.outer width
400 mm.inside width EXTRACTION CHAIN BELT (LINDNER) MANUFACTURER: LINDNER 4.350 MM LONG WITH CENTRAL CHAIN TRANSPORT AND PADDLES FLAT TYPE ON SUPPORTS STAINLESS STEEL STRUCTURE 5 KW MOTOR + GEARBOX CONSTRUCTION YEAR 2013 500 MM.OUTER WIDTH 400 MM.INSIDE WIDTH
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-table diameter: 440 mm<br/>workpiece weight: 500 kg<br/>table height: 325 mm<br/>loading area: 700 x 540 mm<br/>no. of flutes: 7 stück<br/>groove width: 24 mm<br/>flute depth: 24 mm<br/>groove width: oben 15 mm<br/>swivable: 90 °<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,50 t<br/>dimensions of the machine ca.:  m<br/>mit teilscheibe handgetrieben<br/><br/><br/><br/><br/> TABLE DIAMETER: 440 MM
WORKPIECE WEIGHT: 500 KG
TABLE HEIGHT: 325 MM
LOADING AREA: 700 X 540 MM
NO. OF FLUTES: 7 STüCK
GROOVE WIDTH: 24 MM
FLUTE DEPTH: 24 MM
GROOVE WIDTH: OBEN 15 MM
SWIVABLE: 90 °
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,50 T
DIMENSIONS OF THE MACHINE CA.: M
MIT TEILSCHEIBE HANDGETRIEBEN




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-complete reconditioned machine 5/2018 rotor storage: new
 bcnxpl3lzy
 clutch facing: new
 counter blades with reinforcement: new
 power bands: new
 knife holder: new
 seal-rotor: new
 sealing ring wall: new
 screening cassette: new
 wear plates: new
 all knives: new
 terminal strip above: new
 hydraulic oil: new

single-shaft shredder ideal for the milling, granulation of vorgeschreddertem material. 
 application: industrial waste for thermal or wertstoffllichen recovery such as paper, cardboard, art and foams, rubber, leather, textiles, bodenbelaege.etc. 
 work capacity: 1 x 200 kw
 enclosure: complete with r &amp; d
 filler: 1770 x 1700 mm
 einvuellvolumen: approx. 3m 3
 job opening: 1770 x 1315 mm
 rotor length: 1770 mm
 rotor flight circle: 740 mm
 rotor speed: approx. 200-380 rpm
 rotor blades: 50 pieces
 geggenmesser below: 10 piece rubber comb above: 10 piece feed hydraulic: 11 kw
 printing: 30 mm (according to request) funnel: yes
 weight: ca. 18 tons
 dimensions lxwxh mm: 5100 x 2900 x 2700(h=4500 mm mit trichter) COMPLETE RECONDITIONED MACHINE 5/2018 ROTOR STORAGE: NEW BCNXPL3LZY CLUTCH FACING: NEW COUNTER BLADES WITH REINFORCEMENT: NEW POWER BANDS: NEW KNIFE HOLDER: NEW SEAL-ROTOR: NEW SEALING RING WALL: NEW SCREENING CASSETTE: NEW WEAR PLATES: NEW ALL KNIVES: NEW TERMINAL STRIP ABOVE: NEW HYDRAULIC OIL: NEW SINGLE-SHAFT SHREDDER IDEAL FOR THE MILLING, GRANULATION OF VORGESCHREDDERTEM MATERIAL. APPLICATION: INDUSTRIAL WASTE FOR THERMAL OR WERTSTOFFLLICHEN RECOVERY SUCH AS PAPER, CARDBOARD, ART AND FOAMS, RUBBER, LEATHER, TEXTILES, BODENBELAEGE.ETC. WORK CAPACITY: 1 X 200 KW ENCLOSURE: COMPLETE WITH R &AMP; D FILLER: 1770 X 1700 MM EINVUELLVOLUMEN: APPROX. 3M 3 JOB OPENING: 1770 X 1315 MM ROTOR LENGTH: 1770 MM ROTOR FLIGHT CIRCLE: 740 MM ROTOR SPEED: APPROX. 200-380 RPM ROTOR BLADES: 50 PIECES GEGGENMESSER BELOW: 10 PIECE RUBBER COMB ABOVE: 10 PIECE FEED HYDRAULIC: 11 KW PRINTING: 30 MM (ACCORDING TO REQUEST) FUNNEL: YES WEIGHT: CA. 18 TONS DIMENSIONS LXWXH MM: 5100 X 2900 X 2700(H=4500 MM MIT TRICHTER)
Vendedor: Recotech Recyclingmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-table diameter: 400 mm<br/>workpiece weight: 500 kg<br/>table height: 170 mm<br/>loading area: 750 x 450 mm<br/>no. of flutes: 8 stück<br/>groove width: 20 mm<br/>flute depth: 22 mm<br/>groove width: oben 12 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,50 t<br/>dimensions of the machine ca.:  m<br/>mit teilscheibe handgetrieben<br/><br/><br/><br/><br/> TABLE DIAMETER: 400 MM
WORKPIECE WEIGHT: 500 KG
TABLE HEIGHT: 170 MM
LOADING AREA: 750 X 450 MM
NO. OF FLUTES: 8 STüCK
GROOVE WIDTH: 20 MM
FLUTE DEPTH: 22 MM
GROOVE WIDTH: OBEN 12 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,50 T
DIMENSIONS OF THE MACHINE CA.: M
MIT TEILSCHEIBE HANDGETRIEBEN




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-extraction chain  belt (lindner)
9.600 mm long
with central chain transport and paddles
flat type on supports
painted steel
5 kw motor + gearbox
construction year 2013
500 mm.outer width
400 mm.inside width EXTRACTION CHAIN BELT (LINDNER) 9.600 MM LONG WITH CENTRAL CHAIN TRANSPORT AND PADDLES FLAT TYPE ON SUPPORTS PAINTED STEEL 5 KW MOTOR + GEARBOX CONSTRUCTION YEAR 2013 500 MM.OUTER WIDTH 400 MM.INSIDE WIDTH
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-table diameter: 600 mm<br/>workpiece weight: 500 kg<br/>table height: 200 mm<br/>loading area: 950 x 600 mm<br/>no. of flutes: 8 stück<br/>groove width: 25 mm<br/>flute depth: 10 mm<br/>groove width: oben 15 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,50 t<br/>dimensions of the machine ca.:  m<br/>mit teilscheibe handangetrieben<br/><br/><br/><br/><br/> TABLE DIAMETER: 600 MM
WORKPIECE WEIGHT: 500 KG
TABLE HEIGHT: 200 MM
LOADING AREA: 950 X 600 MM
NO. OF FLUTES: 8 STüCK
GROOVE WIDTH: 25 MM
FLUTE DEPTH: 10 MM
GROOVE WIDTH: OBEN 15 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,50 T
DIMENSIONS OF THE MACHINE CA.: M
MIT TEILSCHEIBE HANDANGETRIEBEN




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-spindle diameter 105 mm<br/>  x way 600 mm<br/>  y-way 400 mm<br/>  spindle unloading 475 mm<br/>  spindle speeds - variable 70-2000 rpm<br/>  tabletop 800 x 400 mm<br/>  machine weight approx. 2,5 t<br/>  space requirement approx. 2.0 x 2.0 x 2.2 m<br/>  kl. / gr. distance table spindle 70-550 mm<br/>  spindle motion automatically 310 mm<br/>  feed of the spindle 0.02/0.08/0.2 mm / rev SPINDLE DIAMETER 105 MM
X WAY 600 MM
Y-WAY 400 MM
SPINDLE UNLOADING 475 MM
SPINDLE SPEEDS - VARIABLE 70-2000 RPM
TABLETOP 800 X 400 MM
MACHINE WEIGHT APPROX. 2,5 T
SPACE REQUIREMENT APPROX. 2.0 X 2.0 X 2.2 M
KL. / GR. DISTANCE TABLE SPINDLE 70-550 MM
SPINDLE MOTION AUTOMATICALLY 310 MM
FEED OF THE SPINDLE 0.02/0.08/0.2 MM / REV
Vendedor: GambTec
Año de construcción: usado
Ubicación: Land-workpiece diameter: 550 mm<br/>threading length: 2000 mm<br/>thread pitch: 1 - 150 mm<br/>total power requirement: 10,5 kw<br/>weight of the machine ca.: 14,2 t<br/>dimensions of the machine ca.: 6500 x 3700 mm<br/>well-preserved machine with extensive accessories:<br/><br/>coolant device with 2 pumps for top and bottom cooling<br/>-complete gear set with correction wheels<br/>-part device for multi-start thread and axial table displacement<br/>-automatic 3 diamond dressing device<br/>-automatic roll-up device for multi-section grinding wheels<br/>-3 large steady rest<br/>-4 small steady rest<br/>-25 grinding wheel flanges<br/>various grinding wheels<br/><br/><br/><br/><br/> WORKPIECE DIAMETER: 550 MM
THREADING LENGTH: 2000 MM
THREAD PITCH: 1 - 150 MM
TOTAL POWER REQUIREMENT: 10,5 KW
WEIGHT OF THE MACHINE CA.: 14,2 T
DIMENSIONS OF THE MACHINE CA.: 6500 X 3700 MM
WELL-PRESERVED MACHINE WITH EXTENSIVE ACCESSORIES:

COOLANT DEVICE WITH 2 PUMPS FOR TOP AND BOTTOM COOLING
-COMPLETE GEAR SET WITH CORRECTION WHEELS
-PART DEVICE FOR MULTI-START THREAD AND AXIAL TABLE DISPLACEMENT
-AUTOMATIC 3 DIAMOND DRESSING DEVICE
-AUTOMATIC ROLL-UP DEVICE FOR MULTI-SECTION GRINDING WHEELS
-3 LARGE STEADY REST
-4 SMALL STEADY REST
-25 GRINDING WHEEL FLANGES
VARIOUS GRINDING WHEELS




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Precio: 16.000 €
Ubicación: Land-komplette hackanlage lindner 150/400 37kw mit vibrorinne ca. 17 m,<br/> <br>siebzone ca. 5m, bogenfoerderer ca. 6 m hoehe, laengskratzer in 3 bunker ca.12m,<br/> <br>trommelsieb; ready for work KOMPLETTE HACKANLAGE LINDNER 150/400 37KW MIT VIBRORINNE CA. 17 M,

SIEBZONE CA. 5M, BOGENFOERDERER CA. 6 M HOEHE, LAENGSKRATZER IN 3 BUNKER CA.12M,

TROMMELSIEB; READY FOR WORK
Vendedor: Heindl Handels GmbH
Año de construcción: usado
Ubicación: Land-workpiece diameter: 320 mm<br/>threading length: 300 mm<br/>thread pitch:  mm<br/>total power requirement: 90 kw<br/>weight of the machine ca.: 12000 kg<br/>dimensions of the machine ca.:  m<br/>thread and worm grinder for steering worms<br/><br/><br/><br/> WORKPIECE DIAMETER: 320 MM
THREADING LENGTH: 300 MM
THREAD PITCH: MM
TOTAL POWER REQUIREMENT: 90 KW
WEIGHT OF THE MACHINE CA.: 12000 KG
DIMENSIONS OF THE MACHINE CA.: M
THREAD AND WORM GRINDER FOR STEERING WORMS



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-kb-1843 lindner lb15
jig boring machine, including many accessories

article number: kb-1843
brand: lindner
model: lb 15
series no.: 511
voltage: 380
frequency (hz): 50
rpm: 2500-1900
dimensions lxwxh (mm): 4300 x 3800 x 2630
stucco number in stock: 1
ca weight (kg): 7000
made in: germany
table dimensions (mm): 1100 x 600
ã? diameter (mm): mk 20 / 30 / 40
comments: very tidy and complete machine, lot owner of parts and tools, coming from 1st
 
price (ex vat): &euro; 5.500,00 KB-1843 LINDNER LB15 JIG BORING MACHINE, INCLUDING MANY ACCESSORIES ARTICLE NUMBER: KB-1843 BRAND: LINDNER MODEL: LB 15 SERIES NO.: 511 VOLTAGE: 380 FREQUENCY (HZ): 50 RPM: 2500-1900 DIMENSIONS LXWXH (MM): 4300 X 3800 X 2630 STUCCO NUMBER IN STOCK: 1 CA WEIGHT (KG): 7000 MADE IN: GERMANY TABLE DIMENSIONS (MM): 1100 X 600 &ATILDE;? DIAMETER (MM): MK 20 / 30 / 40 COMMENTS: VERY TIDY AND COMPLETE MACHINE, LOT OWNER OF PARTS AND TOOLS, COMING FROM 1ST PRICE (EX VAT): &EURO; 5.500,00
Vendedor: H.O. J.Kelders. b.v.
Año de construcción: usado
Ubicación: Land-dividing head fabr. lindner, fabr. no. 7519   DIVIDING HEAD FABR. LINDNER, FABR. NO. 7519
Vendedor: Herr Kurt Hinst
Año de construcción: usado
Precio: 50 €
Ubicación: Land-div. fuses z.b lindner new product for 30% reduction 6 pcs. original packed to 50.-net.
others on request.

info under 0170 / 2204056
mail to fa.raupp@t-online DIV. FUSES Z.B LINDNER NEW PRODUCT FOR 30% REDUCTION 6 PCS. ORIGINAL PACKED TO 50.-NET. OTHERS ON REQUEST. INFO UNDER 0170 / 2204056 MAIL TO FA.RAUPP@T-ONLINE
Vendedor: Fa. Manfred Raupp Industrietechnik
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more LINDNER types: