209 ofertas

Año de construcción: usado
Ubicación: Land-type: tr 7 d 200.6,0/5s-84 m â²
built in 2000
total baking area: 84 mâ²
required thermal power total ca. 504 kw
number of baking chambers: 7
each baking chamber baking surface: 12 mâ²
usable bandwidth: 2 m
exterior, back doors, input and output-
fronts, both sides, show - and maintenance-
doors made of stainless steel

equipment each baking chamber:
special-hinge-plate belt miwe spb with average
going flat baking surface without mesh printing
band load up to 50 kg / m â²
electro mechanical belt drive
back height inside: 200 mm

incl. thermal oil: supply temperature: 320 â° c
thermo-oil backraumtermperatur up to 300 â° c
(info: thermo-oil was 2013 replaced/renewed)
the heating and humidification is performed by separate
guess low pressure steam boiler
accessories: loos low pressure steam boiler with water softener

incl. miwe boiler central hkz
boiler max power. 350 kw
with elco burner for natural gas
without tank tank!
year 2000 (2013 electrically partly renewed)

incl. miwe docking station ads
for fermentation car size: 2, 0 x 0, 6 x 1, 95 m (no car)
including safety device
built in 2000

incl. miwe butler
bandwidth/m: 2.0
step length/m: 1.20
with plc
tipping for rolls
built in 2000
 TYPE: TR 7 D 200.6,0/5S-84 M ² BUILT IN 2000 TOTAL BAKING AREA: 84 M² REQUIRED THERMAL POWER TOTAL CA. 504 KW NUMBER OF BAKING CHAMBERS: 7 EACH BAKING CHAMBER BAKING SURFACE: 12 M² USABLE BANDWIDTH: 2 M EXTERIOR, BACK DOORS, INPUT AND OUTPUT- FRONTS, BOTH SIDES, SHOW - AND MAINTENANCE- DOORS MADE OF STAINLESS STEEL EQUIPMENT EACH BAKING CHAMBER: SPECIAL-HINGE-PLATE BELT MIWE SPB WITH AVERAGE GOING FLAT BAKING SURFACE WITHOUT MESH PRINTING BAND LOAD UP TO 50 KG / M ² ELECTRO MECHANICAL BELT DRIVE BACK HEIGHT INSIDE: 200 MM INCL. THERMAL OIL: SUPPLY TEMPERATURE: 320 ° C THERMO-OIL BACKRAUMTERMPERATUR UP TO 300 ° C (INFO: THERMO-OIL WAS 2013 REPLACED/RENEWED) THE HEATING AND HUMIDIFICATION IS PERFORMED BY SEPARATE GUESS LOW PRESSURE STEAM BOILER ACCESSORIES: LOOS LOW PRESSURE STEAM BOILER WITH WATER SOFTENER INCL. MIWE BOILER CENTRAL HKZ BOILER MAX POWER. 350 KW WITH ELCO BURNER FOR NATURAL GAS WITHOUT TANK TANK! YEAR 2000 (2013 ELECTRICALLY PARTLY RENEWED) INCL. MIWE DOCKING STATION ADS FOR FERMENTATION CAR SIZE: 2, 0 X 0, 6 X 1, 95 M (NO CAR) INCLUDING SAFETY DEVICE BUILT IN 2000 INCL. MIWE BUTLER BANDWIDTH/M: 2.0 STEP LENGTH/M: 1.20 WITH PLC TIPPING FOR ROLLS BUILT IN 2000
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Ubicación: Land-amtec vertiwrap weigher double belt weighing system for large 1-50kg packs<br><br>double-belt weighing system for large volumes of 1-50kg of loose materials as bio-pharmaceuticals, food, farm chemical and fertilizer, building materials, ceramcis, chemicals, drug ingredients, seeds, cereals, charcoal, flow soil, plastic grains, etc. <br><br>- specifications: 65 liter hopper | all product contacting parts in stainless steel (ss340) | frame in mild steel with painted surface | accuracy (depending on product): 0,5-1,0% | pre-set-option for 10 programs | max. speed of the machine in neutral: 15 cycles/minute.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP WEIGHER DOUBLE BELT WEIGHING SYSTEM FOR LARGE 1-50KG PACKS

DOUBLE-BELT WEIGHING SYSTEM FOR LARGE VOLUMES OF 1-50KG OF LOOSE MATERIALS AS BIO-PHARMACEUTICALS, FOOD, FARM CHEMICAL AND FERTILIZER, BUILDING MATERIALS, CERAMCIS, CHEMICALS, DRUG INGREDIENTS, SEEDS, CEREALS, CHARCOAL, FLOW SOIL, PLASTIC GRAINS, ETC.

- SPECIFICATIONS: 65 LITER HOPPER | ALL PRODUCT CONTACTING PARTS IN STAINLESS STEEL (SS340) | FRAME IN MILD STEEL WITH PAINTED SURFACE | ACCURACY (DEPENDING ON PRODUCT): 0,5-1,0% | PRE-SET-OPTION FOR 10 PROGRAMS | MAX. SPEED OF THE MACHINE IN NEUTRAL: 15 CYCLES/MINUTE.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink s14 nt (no)tray<br><br>sleeve packer/film band roller for film wrapping of large products or product bundles packed on cardboard trays or loose. automatic infeed by conveyor and automatic outfeed through shrink tunnel (optional available: shrinktunnel-pe-xl). - technical specifications: mitsubishi/japan plc | 380v, 2kw | 6.0bar / 0.1m³/min | max. speed of the machine in neutral: 14 cycles/min | max. product dimensions (mm): l400xw300xh330 | sealing blade width: 700mm | machine dimensions (mm): l1360xw2720xh1900 | weight (net/gross): 465/550kg.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK S14 NT (NO)TRAY

SLEEVE PACKER/FILM BAND ROLLER FOR FILM WRAPPING OF LARGE PRODUCTS OR PRODUCT BUNDLES PACKED ON CARDBOARD TRAYS OR LOOSE. AUTOMATIC INFEED BY CONVEYOR AND AUTOMATIC OUTFEED THROUGH SHRINK TUNNEL (OPTIONAL AVAILABLE: SHRINKTUNNEL-PE-XL). - TECHNICAL SPECIFICATIONS: MITSUBISHI/JAPAN PLC | 380V, 2KW | 6.0BAR / 0.1M³/MIN | MAX. SPEED OF THE MACHINE IN NEUTRAL: 14 CYCLES/MIN | MAX. PRODUCT DIMENSIONS (MM): L400XW300XH330 | SEALING BLADE WIDTH: 700MM | MACHINE DIMENSIONS (MM): L1360XW2720XH1900 | WEIGHT (NET/GROSS): 465/550KG.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-steam boiler firetube loos universal ul-s-ie, 16 tons per hour, 16 bar

this boiler is three-pass single-flame tube/smoke tube type and it was delivered in 2003 by loos international. it can produce 16 tons / h saturated steam at 16 bar. it complete boiler with weishaupt low-nox, multifuel burner, economizer, gas control valves, combustion air fan and siemens simatic s7 controls. the boiler is still installed and in good operational condition.

the main characteristics:
made by: loos international in year 2003.
capacity: 16 tons / hour (12 mw), saturated steam
steam parameters: temperature 235 °c, max pressure 16 bar, saturated
burner type: weishaupt wkgl 70/2-a,
burner model: zm-1ln (multifuel, l
burner capacity: min. 1 100 kw - max. 12 000 kw.
fuel: natural gas & light fuel oil   STEAM BOILER FIRETUBE LOOS UNIVERSAL UL-S-IE, 16 TONS PER HOUR, 16 BAR THIS BOILER IS THREE-PASS SINGLE-FLAME TUBE/SMOKE TUBE TYPE AND IT WAS DELIVERED IN 2003 BY LOOS INTERNATIONAL. IT CAN PRODUCE 16 TONS / H SATURATED STEAM AT 16 BAR. IT COMPLETE BOILER WITH WEISHAUPT LOW-NOX, MULTIFUEL BURNER, ECONOMIZER, GAS CONTROL VALVES, COMBUSTION AIR FAN AND SIEMENS SIMATIC S7 CONTROLS. THE BOILER IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. THE MAIN CHARACTERISTICS: MADE BY: LOOS INTERNATIONAL IN YEAR 2003. CAPACITY: 16 TONS / HOUR (12 MW), SATURATED STEAM STEAM PARAMETERS: TEMPERATURE 235 °C, MAX PRESSURE 16 BAR, SATURATED BURNER TYPE: WEISHAUPT WKGL 70/2-A, BURNER MODEL: ZM-1LN (MULTIFUEL, L BURNER CAPACITY: MIN. 1 100 KW - MAX. 12 000 KW. FUEL: NATURAL GAS & LIGHT FUEL OIL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1991, 2017 overhauled<br/>hours of operation 40,586 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch panel<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled. the following work was carried out or parts were replaced.<br/>this press has been overhauled. following steps of repair and overhauling have been taken:<br/><br/>elder sps controls including enter and exit component assemblies were replaced by new controls of telemécanique tsx micro and the input commands in    the touch panel translated into russian.<br/>manual service push buttons were replaced by schneider tft touch panel 7,5? of type magelis.<br/>upper and lower light barriers including repeater (telco) have been renewed.<br/>the electric connection at hydraulic manifold is new, with partially renewed machine control cables and removal of needless connection.<br/>hydraulic oil tank has been emptied, cleaned and all filters were renewed.<br/>rubber gear for diminishing pressure between pumps and electric motors were renewed.<br/>pipes between high pressure part of the pump and hydraulic manifold have been renewed.<br/>cartridge cap on manifold has been sealed up newly.<br/>rubber buffers of pre-press flap are new.<br/>filling level indicator at tank has been renewed.<br/>measurement connections at hydraulic tank were altered.<br/>all flanges of hydraulic pipes have been sealed up newly.<br/>main cylinder, clam shell cylinder, needle cylinder and cylinder for wire core have all been sealed up newly.<br/>plunger of main cylinder, of clam shell cylinder and of needle cylinder have been ground and chrome-plated newly.<br/>all rollers and guide pulleys of press ram have been cleaned and loosened, the front rollers were renewed.<br/>wire guidance was cleaned and loosened, the back wire guidance rollers and wire core with pinhead rollers have been renewed.<br/>pinheads including blades have been reworked.<br/>hinges at press channel, on lateral parts and cap have been renewed.<br/>all hydraulic hoses of clam shell cylinders have been renewed.<br/><br/>inspections in russia, near moscow are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1991, 2017 OVERHAULED
HOURS OF OPERATION 40,586 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED. THE FOLLOWING WORK WAS CARRIED OUT OR PARTS WERE REPLACED.
THIS PRESS HAS BEEN OVERHAULED. FOLLOWING STEPS OF REPAIR AND OVERHAULING HAVE BEEN TAKEN:

ELDER SPS CONTROLS INCLUDING ENTER AND EXIT COMPONENT ASSEMBLIES WERE REPLACED BY NEW CONTROLS OF TELEMéCANIQUE TSX MICRO AND THE INPUT COMMANDS IN THE TOUCH PANEL TRANSLATED INTO RUSSIAN.
MANUAL SERVICE PUSH BUTTONS WERE REPLACED BY SCHNEIDER TFT TOUCH PANEL 7,5? OF TYPE MAGELIS.
UPPER AND LOWER LIGHT BARRIERS INCLUDING REPEATER (TELCO) HAVE BEEN RENEWED.
THE ELECTRIC CONNECTION AT HYDRAULIC MANIFOLD IS NEW, WITH PARTIALLY RENEWED MACHINE CONTROL CABLES AND REMOVAL OF NEEDLESS CONNECTION.
HYDRAULIC OIL TANK HAS BEEN EMPTIED, CLEANED AND ALL FILTERS WERE RENEWED.
RUBBER GEAR FOR DIMINISHING PRESSURE BETWEEN PUMPS AND ELECTRIC MOTORS WERE RENEWED.
PIPES BETWEEN HIGH PRESSURE PART OF THE PUMP AND HYDRAULIC MANIFOLD HAVE BEEN RENEWED.
CARTRIDGE CAP ON MANIFOLD HAS BEEN SEALED UP NEWLY.
RUBBER BUFFERS OF PRE-PRESS FLAP ARE NEW.
FILLING LEVEL INDICATOR AT TANK HAS BEEN RENEWED.
MEASUREMENT CONNECTIONS AT HYDRAULIC TANK WERE ALTERED.
ALL FLANGES OF HYDRAULIC PIPES HAVE BEEN SEALED UP NEWLY.
MAIN CYLINDER, CLAM SHELL CYLINDER, NEEDLE CYLINDER AND CYLINDER FOR WIRE CORE HAVE ALL BEEN SEALED UP NEWLY.
PLUNGER OF MAIN CYLINDER, OF CLAM SHELL CYLINDER AND OF NEEDLE CYLINDER HAVE BEEN GROUND AND CHROME-PLATED NEWLY.
ALL ROLLERS AND GUIDE PULLEYS OF PRESS RAM HAVE BEEN CLEANED AND LOOSENED, THE FRONT ROLLERS WERE RENEWED.
WIRE GUIDANCE WAS CLEANED AND LOOSENED, THE BACK WIRE GUIDANCE ROLLERS AND WIRE CORE WITH PINHEAD ROLLERS HAVE BEEN RENEWED.
PINHEADS INCLUDING BLADES HAVE BEEN REWORKED.
HINGES AT PRESS CHANNEL, ON LATERAL PARTS AND CAP HAVE BEEN RENEWED.
ALL HYDRAULIC HOSES OF CLAM SHELL CYLINDERS HAVE BEEN RENEWED.

INSPECTIONS IN RUSSIA, NEAR MOSCOW ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-steam boiler loos ul-s 22 t/h - 13 bar, natural gas + liquid fuel

complete boiler plant with loos universal ul-s 22000 high capacity steam boiler with exhaust gas economizer and all necessary auxiliaries, delivered in 2002 total operating hours approx 18000 h with gas only. the package includes boiler, feed water pumps, feed water tank and control panel. operated only less than 8000 hours. the equipment is in good condition. the plant is still installed and in operation.

boiler is a three-pass, smoke tube boiler with economizer. the burner is weishaupt multifuel (natural gas and light fuel oil) burner which is covered with easily removable insulation box. for natural gas feeding the boiler has gas control train system and for light liquid fuel two identical fuel pumps. plant has a approx 15 m3 feed water tank with deaerator controlled by separate siemens simatic s7 plc. the boiler unit has its own main control panels with simatic s7 plc with c7 operation panel

technical information:

boiler type: loos universal ul-s 22000
steam capacity: 22 tons / 13 bar saturated
burners: weishaupt multifuel
fuel: natural gas and light fuel oil
control system: loos with siemens simatic s7 plc
feed water tank: loos - 15 m3 with deaerator and s7 plc
feed water pumps: 2 x grundfoss sr32-9   STEAM BOILER LOOS UL-S 22 T/H - 13 BAR, NATURAL GAS + LIQUID FUEL COMPLETE BOILER PLANT WITH LOOS UNIVERSAL UL-S 22000 HIGH CAPACITY STEAM BOILER WITH EXHAUST GAS ECONOMIZER AND ALL NECESSARY AUXILIARIES, DELIVERED IN 2002 TOTAL OPERATING HOURS APPROX 18000 H WITH GAS ONLY. THE PACKAGE INCLUDES BOILER, FEED WATER PUMPS, FEED WATER TANK AND CONTROL PANEL. OPERATED ONLY LESS THAN 8000 HOURS. THE EQUIPMENT IS IN GOOD CONDITION. THE PLANT IS STILL INSTALLED AND IN OPERATION. BOILER IS A THREE-PASS, SMOKE TUBE BOILER WITH ECONOMIZER. THE BURNER IS WEISHAUPT MULTIFUEL (NATURAL GAS AND LIGHT FUEL OIL) BURNER WHICH IS COVERED WITH EASILY REMOVABLE INSULATION BOX. FOR NATURAL GAS FEEDING THE BOILER HAS GAS CONTROL TRAIN SYSTEM AND FOR LIGHT LIQUID FUEL TWO IDENTICAL FUEL PUMPS. PLANT HAS A APPROX 15 M3 FEED WATER TANK WITH DEAERATOR CONTROLLED BY SEPARATE SIEMENS SIMATIC S7 PLC. THE BOILER UNIT HAS ITS OWN MAIN CONTROL PANELS WITH SIMATIC S7 PLC WITH C7 OPERATION PANEL TECHNICAL INFORMATION: BOILER TYPE: LOOS UNIVERSAL UL-S 22000 STEAM CAPACITY: 22 TONS / 13 BAR SATURATED BURNERS: WEISHAUPT MULTIFUEL FUEL: NATURAL GAS AND LIGHT FUEL OIL CONTROL SYSTEM: LOOS WITH SIEMENS SIMATIC S7 PLC FEED WATER TANK: LOOS - 15 M3 WITH DEAERATOR AND S7 PLC FEED WATER PUMPS: 2 X GRUNDFOSS SR32-9
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2014<br/>hours of operation 6,518 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories :<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider. to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 6,518 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2014
HOURS OF OPERATION 6,518 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES :
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 6,518 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-conveyor belt tiedeken, above ground, effective width 1800/1400 mm
technical specification:
manufacturer stahlbau tiedeken
type conveyor belt
year of construction 1995

elevating conveyor: 
grade approx 30°
drive power 9,2 kw
axial distance 16500 mm
effective width 1400 mm
belt width 1400 mm
velocity 5 m/min
conveying quantity 3-5 t/h (loose material)
tappets height 40 mm
tappets distance 500 mm

feeding conveyor: 
drive power 1,5 kw
axial distance 5200 mm
effective width 1800 mm
belt width 1800 mm
velocity 6 m/min
conveying quantity 3-5 t/h (loose material) CONVEYOR BELT TIEDEKEN, ABOVE GROUND, EFFECTIVE WIDTH 1800/1400 MM TECHNICAL SPECIFICATION: MANUFACTURER STAHLBAU TIEDEKEN TYPE CONVEYOR BELT YEAR OF CONSTRUCTION 1995 ELEVATING CONVEYOR: GRADE APPROX 30° DRIVE POWER 9,2 KW AXIAL DISTANCE 16500 MM EFFECTIVE WIDTH 1400 MM BELT WIDTH 1400 MM VELOCITY 5 M/MIN CONVEYING QUANTITY 3-5 T/H (LOOSE MATERIAL) TAPPETS HEIGHT 40 MM TAPPETS DISTANCE 500 MM FEEDING CONVEYOR: DRIVE POWER 1,5 KW AXIAL DISTANCE 5200 MM EFFECTIVE WIDTH 1800 MM BELT WIDTH 1800 MM VELOCITY 6 M/MIN CONVEYING QUANTITY 3-5 T/H (LOOSE MATERIAL)
Vendedor: RDA Recycling Machinery GmbH
Año de construcción: usado
Ubicación: Land-technical data baler<br/>manufacturer hsm<br/>typ vk 4812 p<br/>year of construction 2016<br/>hours of operation 1,937 hours<br/>press power main press 48 tons<br/>specific press capacity 58,2 n/cm²<br/>feed channel 1,250 x 1,020 mm<br/>theoretic cycle time 24,5 sec.<br/>theoretic  throughput rate 151 m³/hour<br/>bale size 1,100 x 750 x 600 up to 1,200mm<br/>driving motor 15 kw<br/>connected load 17 kw<br/>rated current 36 a<br/>tying system 4-fold horizontal, fully automatic<br/>throughput rate at a<br/>bulk weight of 20 kg/cbm up to 3 tons/hour<br/>bulk weight of 50 kg/cbm up to 7,5 tons/hour<br/>bale weight up to 550 kg, depends on material<br/>sps controller (manuf., type) siemens<br/>operating panel (manuf., type) siemens hmi touch panel<br/>filling quantity hydraulic oil tank 300 l<br/>oil type hvi 46<br/>transport dimensions 8,500 x 2,500 x 2,700 mm (l x w x h)<br/>machine weight baler approx. 10 tons<br/><br/>equipment/accessories:<br/>funnel, two mobile wire coil stands for 40 kg wire rolls, bale slider.  to pre-compact and hold down voluminous materials such as loose cartons or foil, the machine is equipped with a small pre-compression flap, holding-down device.<br/><br/>condition of the baler:<br/>with only 1,937 operating hours, the press is in very good condition, immediately available and ready for operation.<br/><br/>comments:<br/>the documentation (manual, ce, electr./hydr.-drawings), are completely available.  inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA BALER
MANUFACTURER HSM
TYP VK 4812 P
YEAR OF CONSTRUCTION 2016
HOURS OF OPERATION 1,937 HOURS
PRESS POWER MAIN PRESS 48 TONS
SPECIFIC PRESS CAPACITY 58,2 N/CM²
FEED CHANNEL 1,250 X 1,020 MM
THEORETIC CYCLE TIME 24,5 SEC.
THEORETIC THROUGHPUT RATE 151 M³/HOUR
BALE SIZE 1,100 X 750 X 600 UP TO 1,200MM
DRIVING MOTOR 15 KW
CONNECTED LOAD 17 KW
RATED CURRENT 36 A
TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 20 KG/CBM UP TO 3 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM UP TO 7,5 TONS/HOUR
BALE WEIGHT UP TO 550 KG, DEPENDS ON MATERIAL
SPS CONTROLLER (MANUF., TYPE) SIEMENS
OPERATING PANEL (MANUF., TYPE) SIEMENS HMI TOUCH PANEL
FILLING QUANTITY HYDRAULIC OIL TANK 300 L
OIL TYPE HVI 46
TRANSPORT DIMENSIONS 8,500 X 2,500 X 2,700 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 10 TONS

EQUIPMENT/ACCESSORIES:
FUNNEL, TWO MOBILE WIRE COIL STANDS FOR 40 KG WIRE ROLLS, BALE SLIDER. TO PRE-COMPACT AND HOLD DOWN VOLUMINOUS MATERIALS SUCH AS LOOSE CARTONS OR FOIL, THE MACHINE IS EQUIPPED WITH A SMALL PRE-COMPRESSION FLAP, HOLDING-DOWN DEVICE.

CONDITION OF THE BALER:
WITH ONLY 1,937 OPERATING HOURS, THE PRESS IS IN VERY GOOD CONDITION, IMMEDIATELY AVAILABLE AND READY FOR OPERATION.

COMMENTS:
THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-1 aluminium outer silo

isolated, double wall

inside: 2,500 mm
outside: 2,600 mm
height: approx. 7,500 mm
with fluidised bed,.
sluices discharge,
loosening up
content ca: 25 to flour dust

for sale

price on request
tel. +49 172 8345457
  1 ALUMINIUM OUTER SILO ISOLATED, DOUBLE WALL INSIDE: 2,500 MM OUTSIDE: 2,600 MM HEIGHT: APPROX. 7,500 MM WITH FLUIDISED BED,. SLUICES DISCHARGE, LOOSENING UP CONTENT CA: 25 TO FLOUR DUST FOR SALE PRICE ON REQUEST TEL. +49 172 8345457
Vendedor: Silo- und Förderanlagen H. Schüler
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 4 mm<br/>distance between columns: 3080 mm<br/>control: siemens s7 <br/>bending angle max.: 130 °<br/>upper clamping stroke: 300 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 6,2 t<br/>dimensions of the machine ca.:  m<br/>ce signed:  <br/>electric 400 volt:  <br/>cnc-back gauge: 1000 mm<br/>crowning system:  <br/>cnc control with touchscreen:  <br/>automatic tool clamping: oben <br/>foot switch:  <br/>upper tool: 45 °<br/>the modern full hydraulic bending machine is the ideal solution for reliable, <br/>fast and precise bending. extremely versatile, flexible and easy to use.<br/>-    hydraulically driven upper and bending beam<br/>-    pointed upper beam rail 45 degrees<br/>-    rails of upper, lower and bending beam interchangeable<br/>-    operating panel with:<br/>     ?    indication of bending angle<br/>     ?    pre selection of bending angle<br/>     ?    tipp switch to operate upper and bending beam » automatic mode<br/>-    control system: plc - siemens - s7<br/>-    foot switch for manual and automatic operation ce ?certificate<br/>-    safety stop at approx. 25 mm upper beam height<br/>-    dynamic hydraulic camber - patented (with this dynamic hydraulic camber <br/>system it is possible to achieve a very good bending result over the full <br/>length. conventional systems are only able to bend specific sheets at specific <br/>angles with a specific mechanical camber. this new dynamic hydraulic camber <br/>allows you to bend any angle ?<br/>-    motor-controlled back gauge (1000 mm) with electronic position indicator <br/>of the back gauge. an easily manageable control panel allows to setting the <br/>desired back gauge value precisely. the back gauge adjusts accordingly. if you <br/>want to make many different bending and save time by eliminating manual <br/>measuring, we recommend this option.<br/>-    touchscreen: selection of back gauge values and bending angle with a <br/>microprocessor for the selection and storing of de up to 8 positions of the <br/>back gauge and up to 8 angles per bending part. it is possible to store up to <br/>999 bending parts (= 8 values for back gauge position and 8 values for bending <br/>angles) and recall of values via quick selection. the bending machine then <br/>operates the working steps automatically for each selected profile.<br/>-    automatic tool clamping: 7 simplify the changing of upper beam tools. with <br/>automatic clamping you loosen and fasten all your upper beam tools on the push <br/>of a button. you will change your tools at record speed.<br/><br/>unused hydraulic folding machine with special price.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 4 MM
DISTANCE BETWEEN COLUMNS: 3080 MM
CONTROL: SIEMENS S7
BENDING ANGLE MAX.: 130 °
UPPER CLAMPING STROKE: 300 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 6,2 T
DIMENSIONS OF THE MACHINE CA.: M
CE SIGNED:
ELECTRIC 400 VOLT:
CNC-BACK GAUGE: 1000 MM
CROWNING SYSTEM:
CNC CONTROL WITH TOUCHSCREEN:
AUTOMATIC TOOL CLAMPING: OBEN
FOOT SWITCH:
UPPER TOOL: 45 °
THE MODERN FULL HYDRAULIC BENDING MACHINE IS THE IDEAL SOLUTION FOR RELIABLE,
FAST AND PRECISE BENDING. EXTREMELY VERSATILE, FLEXIBLE AND EASY TO USE.
- HYDRAULICALLY DRIVEN UPPER AND BENDING BEAM
- POINTED UPPER BEAM RAIL 45 DEGREES
- RAILS OF UPPER, LOWER AND BENDING BEAM INTERCHANGEABLE
- OPERATING PANEL WITH:
? INDICATION OF BENDING ANGLE
? PRE SELECTION OF BENDING ANGLE
? TIPP SWITCH TO OPERATE UPPER AND BENDING BEAM » AUTOMATIC MODE
- CONTROL SYSTEM: PLC - SIEMENS - S7
- FOOT SWITCH FOR MANUAL AND AUTOMATIC OPERATION CE ?CERTIFICATE
- SAFETY STOP AT APPROX. 25 MM UPPER BEAM HEIGHT
- DYNAMIC HYDRAULIC CAMBER - PATENTED (WITH THIS DYNAMIC HYDRAULIC CAMBER
SYSTEM IT IS POSSIBLE TO ACHIEVE A VERY GOOD BENDING RESULT OVER THE FULL
LENGTH. CONVENTIONAL SYSTEMS ARE ONLY ABLE TO BEND SPECIFIC SHEETS AT SPECIFIC
ANGLES WITH A SPECIFIC MECHANICAL CAMBER. THIS NEW DYNAMIC HYDRAULIC CAMBER
ALLOWS YOU TO BEND ANY ANGLE ?
- MOTOR-CONTROLLED BACK GAUGE (1000 MM) WITH ELECTRONIC POSITION INDICATOR
OF THE BACK GAUGE. AN EASILY MANAGEABLE CONTROL PANEL ALLOWS TO SETTING THE
DESIRED BACK GAUGE VALUE PRECISELY. THE BACK GAUGE ADJUSTS ACCORDINGLY. IF YOU
WANT TO MAKE MANY DIFFERENT BENDING AND SAVE TIME BY ELIMINATING MANUAL
MEASURING, WE RECOMMEND THIS OPTION.
- TOUCHSCREEN: SELECTION OF BACK GAUGE VALUES AND BENDING ANGLE WITH A
MICROPROCESSOR FOR THE SELECTION AND STORING OF DE UP TO 8 POSITIONS OF THE
BACK GAUGE AND UP TO 8 ANGLES PER BENDING PART. IT IS POSSIBLE TO STORE UP TO
999 BENDING PARTS (= 8 VALUES FOR BACK GAUGE POSITION AND 8 VALUES FOR BENDING
ANGLES) AND RECALL OF VALUES VIA QUICK SELECTION. THE BENDING MACHINE THEN
OPERATES THE WORKING STEPS AUTOMATICALLY FOR EACH SELECTED PROFILE.
- AUTOMATIC TOOL CLAMPING: 7 SIMPLIFY THE CHANGING OF UPPER BEAM TOOLS. WITH
AUTOMATIC CLAMPING YOU LOOSEN AND FASTEN ALL YOUR UPPER BEAM TOOLS ON THE PUSH
OF A BUTTON. YOU WILL CHANGE YOUR TOOLS AT RECORD SPEED.

UNUSED HYDRAULIC FOLDING MACHINE WITH SPECIAL PRICE.
MACHINE DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-loos boiler
built in 2001
weishaupt oil burner
1250kg / h 10 bar LOOS BOILER BUILT IN 2001 WEISHAUPT OIL BURNER 1250KG / H 10 BAR
Vendedor: HFM Fleischereimaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 140 kg<br/>dimensions (l x w x h) approx.: 2100 x 650 x 1700 mm<br/>description: brush width 1400, diameter approx. 300 mm, motor 0.37 kw, 1390 rpm, 2 driven transport rollers, width 1300 mm, motor 0.37 kw, 2840 rpm, 1 loose transport roller width 1400 mm, passage height max. 100 mm WEIGHT APPROX.: 140 KG
DIMENSIONS (L X W X H) APPROX.: 2100 X 650 X 1700 MM
DESCRIPTION: BRUSH WIDTH 1400, DIAMETER APPROX. 300 MM, MOTOR 0.37 KW, 1390 RPM, 2 DRIVEN TRANSPORT ROLLERS, WIDTH 1300 MM, MOTOR 0.37 KW, 2840 RPM, 1 LOOSE TRANSPORT ROLLER WIDTH 1400 MM, PASSAGE HEIGHT MAX. 100 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ws32 bgp column drilling machine

-mk3
-automatic voeding
-traploos adjustable voedingssnelheid
-140/1960 t/m
-tapfunctie
-uitlading 150 mm
-panel 334 x 334 mm
-koeling
-beschermkap
-noodstop
-verlichting
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) WS32 BGP COLUMN DRILLING MACHINE -MK3 -AUTOMATIC VOEDING -TRAPLOOS ADJUSTABLE VOEDINGSSNELHEID -140/1960 T/M -TAPFUNCTIE -UITLADING 150 MM -PANEL 334 X 334 MM -KOELING -BESCHERMKAP -NOODSTOP -VERLICHTING -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: used machinery auction RESALE 4.100 €
Ubicación: Land-weight approx.: 3100 kg<br/>dimensions (l x w x h) approx.: 2400 x 1400 x 2100 mm<br/>description: jungheinrich gas forklift 1,6t with 13267 operating hours, triplex-hubgerüst 3100mm, min. operating height 2100m, forks 1150mm, super elastic tyres, slightly loosing oil on hydrostat WEIGHT APPROX.: 3100 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 1400 X 2100 MM
DESCRIPTION: JUNGHEINRICH GAS FORKLIFT 1,6T WITH 13267 OPERATING HOURS, TRIPLEX-HUBGERüST 3100MM, MIN. OPERATING HEIGHT 2100M, FORKS 1150MM, SUPER ELASTIC TYRES, SLIGHTLY LOOSING OIL ON HYDROSTAT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
sharpener kucharczyk type 2003
18 800 eur

the basic model of machine, wet sharpening saws
with straight teeth, naprzemiansko?nymi and trapezoidal.

-in stock
-year of manufacture 2006
-user manual

technical parameters:

-power supply 380-400v 50 hz
-diamond cke 150x6x1, 5 x 32

-grinding wheel speed 2800 rpm
-the diameter of the saw ostrzonych in the range 100-600 mm
-cnc 2 axes

-sharpening of saws, angle of attack and the clearance angle
-chilled coolant ecocool s co5
-has a snap-in to a sharpening no?yk

driver

-grinding machine with cnc control.
-the controller has memory to 128 programs, and program saw sharpening with wy?amanymi teeth.
-includes software for sharpening the same drink eg. wielopi? without having to commute to the tooth.

-blades rake angles and touchdowns, and trapezoidal teeth with inclination to 45 ° in both directions.
-sharpening angles and application is done by a single premise of saws without its removal.

the advantages of

our sharpener grinding wheel for the first transition enters the sawtooth only 0.2 mm, and then moves to the saw and begins the process of sharpening. after the last passage smoothing grinding away from the tooth and then leaves, which prevents damage to the tip of the tooth during the departure.

the application of pazurowego type feeder, provides very precise under grinding tooth that will be challenged. at the same time, prevents collisions of a grinding disc saws, if tine spacing is different, which is particularly applicable in the case of reconditioned saws.

brake, which keeps the ring from turning, is assisted air actuator. when the next tooth will loosen brake pressure, and then saw rotates loosely, then when you stop is firmly pressed against the pneumatic actuator to the incus. this process provides more accurate administration of the tooth under the grinding wheel, and while sharpening the saw is up to locked (does not move when focusing), which in the end positively affects the quality of sharpening. SHARPENER KUCHARCZYK TYPE 2003 18 800 EUR THE BASIC MODEL OF MACHINE, WET SHARPENING SAWS WITH STRAIGHT TEETH, NAPRZEMIANSKO?NYMI AND TRAPEZOIDAL. -IN STOCK -YEAR OF MANUFACTURE 2006 -USER MANUAL TECHNICAL PARAMETERS: -POWER SUPPLY 380-400V 50 HZ -DIAMOND CKE 150X6X1, 5 X 32 -GRINDING WHEEL SPEED 2800 RPM -THE DIAMETER OF THE SAW OSTRZONYCH IN THE RANGE 100-600 MM -CNC 2 AXES -SHARPENING OF SAWS, ANGLE OF ATTACK AND THE CLEARANCE ANGLE -CHILLED COOLANT ECOCOOL S CO5 -HAS A SNAP-IN TO A SHARPENING NO?YK DRIVER -GRINDING MACHINE WITH CNC CONTROL. -THE CONTROLLER HAS MEMORY TO 128 PROGRAMS, AND PROGRAM SAW SHARPENING WITH WY?AMANYMI TEETH. -INCLUDES SOFTWARE FOR SHARPENING THE SAME DRINK EG. WIELOPI? WITHOUT HAVING TO COMMUTE TO THE TOOTH. -BLADES RAKE ANGLES AND TOUCHDOWNS, AND TRAPEZOIDAL TEETH WITH INCLINATION TO 45 ° IN BOTH DIRECTIONS. -SHARPENING ANGLES AND APPLICATION IS DONE BY A SINGLE PREMISE OF SAWS WITHOUT ITS REMOVAL. THE ADVANTAGES OF OUR SHARPENER GRINDING WHEEL FOR THE FIRST TRANSITION ENTERS THE SAWTOOTH ONLY 0.2 MM, AND THEN MOVES TO THE SAW AND BEGINS THE PROCESS OF SHARPENING. AFTER THE LAST PASSAGE SMOOTHING GRINDING AWAY FROM THE TOOTH AND THEN LEAVES, WHICH PREVENTS DAMAGE TO THE TIP OF THE TOOTH DURING THE DEPARTURE. THE APPLICATION OF PAZUROWEGO TYPE FEEDER, PROVIDES VERY PRECISE UNDER GRINDING TOOTH THAT WILL BE CHALLENGED. AT THE SAME TIME, PREVENTS COLLISIONS OF A GRINDING DISC SAWS, IF TINE SPACING IS DIFFERENT, WHICH IS PARTICULARLY APPLICABLE IN THE CASE OF RECONDITIONED SAWS. BRAKE, WHICH KEEPS THE RING FROM TURNING, IS ASSISTED AIR ACTUATOR. WHEN THE NEXT TOOTH WILL LOOSEN BRAKE PRESSURE, AND THEN SAW ROTATES LOOSELY, THEN WHEN YOU STOP IS FIRMLY PRESSED AGAINST THE PNEUMATIC ACTUATOR TO THE INCUS. THIS PROCESS PROVIDES MORE ACCURATE ADMINISTRATION OF THE TOOTH UNDER THE GRINDING WHEEL, AND WHILE SHARPENING THE SAW IS UP TO LOCKED (DOES NOT MOVE WHEN FOCUSING), WHICH IN THE END POSITIVELY AFFECTS THE QUALITY OF SHARPENING.
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-weight approx.: 1500 kg<br/>dimensions (l x w x h) approx.: 1760 x 1275 x 1350 mm<br/>description: 1 x sumitomo semi-automatic dual spooler adapted for spooling of tight or loose buffered optical fibers 0.5 - 4.0 mm dia. could also be used for fine copper wire. traverse has automatic wire transfer. needs electrical cabinet. bobbin dia. 400 mm bobbin width 250 mm arbor dia. 38 mm bobbin weight 200 kg traverse by servo motor and chain. speed 250 rpm drive by 2 yaskawa electric 1.23 hp motors through gear reducers WEIGHT APPROX.: 1500 KG
DIMENSIONS (L X W X H) APPROX.: 1760 X 1275 X 1350 MM
DESCRIPTION: 1 X SUMITOMO SEMI-AUTOMATIC DUAL SPOOLER ADAPTED FOR SPOOLING OF TIGHT OR LOOSE BUFFERED OPTICAL FIBERS 0.5 - 4.0 MM DIA. COULD ALSO BE USED FOR FINE COPPER WIRE. TRAVERSE HAS AUTOMATIC WIRE TRANSFER. NEEDS ELECTRICAL CABINET. BOBBIN DIA. 400 MM BOBBIN WIDTH 250 MM ARBOR DIA. 38 MM BOBBIN WEIGHT 200 KG TRAVERSE BY SERVO MOTOR AND CHAIN. SPEED 250 RPM DRIVE BY 2 YASKAWA ELECTRIC 1.23 HP MOTORS THROUGH GEAR REDUCERS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 142.000 €
Ubicación: Land-horizontal packaging line for the semi-automatic production and filling of roughage or similar. system consists of a storage bunker with variable floor and loosening up rollers. double drum filter with dust extraction. drums in inclination and speed adjustable. weighing unit with volume control and fine dosage. verpresseinheit with hydraulicher compaction. output shaft with recording for plastic bags. packaging sizes: w: 400 mm h: 200 mm l: 0-1200 mm. control of the system via touch-screen control monitor HORIZONTAL PACKAGING LINE FOR THE SEMI-AUTOMATIC PRODUCTION AND FILLING OF ROUGHAGE OR SIMILAR. SYSTEM CONSISTS OF A STORAGE BUNKER WITH VARIABLE FLOOR AND LOOSENING UP ROLLERS. DOUBLE DRUM FILTER WITH DUST EXTRACTION. DRUMS IN INCLINATION AND SPEED ADJUSTABLE. WEIGHING UNIT WITH VOLUME CONTROL AND FINE DOSAGE. VERPRESSEINHEIT WITH HYDRAULICHER COMPACTION. OUTPUT SHAFT WITH RECORDING FOR PLASTIC BAGS. PACKAGING SIZES: W: 400 MM H: 200 MM L: 0-1200 MM. CONTROL OF THE SYSTEM VIA TOUCH-SCREEN CONTROL MONITOR
Vendedor: Meik Stromberg
Año de construcción: usado
Ubicación: Land-single sided edge banding machine
brand: ima
type: compact pc-6220 f
year: 2000

left hand machine
workpiece transport via a driven transport chain and adjustable top pressure
beckhoff control

need of space lxwxh mm: 7400x1500x2000mm
weight: approx. 3600kg

technical data:

edge material:
a) veneer/coil and strip ware,
b) pvc/coil and strip ware
c) solid wood strips

min. edge height = approx. 14 mm
max. edge height = approx. 55 mm
min. edge tickness = approx. 0,4 mm
max. edge thickness = approx. 20 mm
min. panel thickness = approx. 10 mm
min. panel thickness = approx. 16 mm at use of the multi function unit
max. panel thickness = approx. 50 mm
min. panel width = appprox . 60 mm
min. panel length = approx. 150 mm
max. strips = approx. 20x50 mm

panel supernatant from the chain conveyor = approx. 35 mm

pneumatic connection: approx. 7 - 8 bar

the basic machine of the ima-compact-pc consisting of:
a) basic frame as well as housing for electro installation
b) drive for the workpiece transport via mechanical controllable gear motor, feed speed approx. 8-20 m/min. (not the same as the working speed)
c) conveyor chain (80 mm wide + 60 mm long chain plates)
d) top pressure equipped with: 2 rows of rubber coated rollers, height adjustment (approx. 50 mm) central via handwheel
e) imatronic 121 sps control with central unit and control panel; brand beckhoff
f)  electro installation en, switch components in basic frame, operating elements in a separate control panel.
i) movable supporting rail approx. 700 mm for wide workpieces

line voltage: 3/n/pe, 400/230 v, 50 hz, +6/-10%
with resilient neutral wire
zeroing (fi circuit breaker just allowed with a pulse current-sensitive ground fault interrupter)
at order the information of the electro data sheet are relevant! differences have to be additionally offered (extra charge).
(if the line voltage can not be kept a voltage stabilizer need to be installed at the expense of the machine operator)
control voltage: 24 v dc / 230 v ac

lacquering:
- basic machine with hoods: grey white ral 9002 structure
- units: dust grey ral 7037 strukture u. smooth
- safety covers: signal red ral 301 structure
- motors: black ral 9005 silk-matt

adjustment via nc axis: horizontal adjustable, unheated infeed fence, pressure zone, flush milling, multi function unit, profile scraper

pre-milling unit for milling the edge/calibrating of formated workpieces or for milling of side grooves, chamfers or profiles, controllable, not swivable, without tracing, with 2 motors á 3 kw, 400 v, 200 hz, 12000 rpm, working flow in working and counter working direction, without profile tool, with 1 single suction hood Ø 120 mm, with static frequency inverter, horizontal and verticale adjustment with mechanical digital display, with blowing nozzle for the removal of loose particles from the workpiece surface and ir-heater.

gluing unit with closed oil-bath gear, temperature control with separate glue roller drive and 1 main pressure roller

hot melt application 0,8 l compl. with heating cartridge and suplly plug max. edge height 50 mm

single roller/strip magazine, feeding angle 8° for coil material up to 3 mm and strips up to 20 mm, end cutter pneumatic controlled, up to 3 mm edge thickness, max. edge cross sectional area 120 qmm, incl. restraint device for the coil ware, max. coilØ 860mm

5 re-pressure rollers with mech. digital display, pressure rollers single seitlich sprung and adjustbale on side.

end trimming unit
2 motors á 660 w, 400 v, 200 hz., 12000 rpm, installed on top pressure for the end trimming of the frontal and rear edge or strip supernatant,
for flush or chamfer cuts
with 2 hm-end trimming saw blades 160 x 22 mm z=48,
min. panel supernatant: approx. 30 mm + max. edge or strip thickness
min. panel length: approx. 150 mm
min. distance between 2 workpieces approx. 650 mm
max. working speed: 20 m/min.
frontal-/rear edge tracing shoe movable
max. edge height 55 mm ,max. edge thickness 20 mm
hor. pneum. swivable device 0+10°
with pneumatical movable side tracing,
manual positionable via digital display, 
static frequency inverter for motors >0,75 up to 1,5 kw, incl. filter and brake resistance power supply 3-phase, 400-480 v, +/-5%, 50/60 hz

milling unit for flush milling from top and bottom, for 2 motors á 1850 w, 400 v, 200 hz, 12000 rpm
max. approx. 3 degrees swivable (at workpiece thickness over 25 mm), with height tracing, without side tracing, motors ordered one above the other, without tool, with mechanical digital display 09 for the vertical adjustment, with single suction studs

motor with hsk-tool holder, working in counter direction

statical frequency changer for motors ?2,2 up to 4.0 kw, incl. filter and brake resistance power supply 3-phase, 400-480 v, +/-5%, 50/60 hz

sound absorbing/safety hood for end trimming and milling unit, suction studs lx100 und 2x80 to the top,

multi funct SINGLE SIDED EDGE BANDING MACHINE BRAND: IMA TYPE: COMPACT PC-6220 F YEAR: 2000 LEFT HAND MACHINE WORKPIECE TRANSPORT VIA A DRIVEN TRANSPORT CHAIN AND ADJUSTABLE TOP PRESSURE BECKHOFF CONTROL NEED OF SPACE LXWXH MM: 7400X1500X2000MM WEIGHT: APPROX. 3600KG TECHNICAL DATA: EDGE MATERIAL: A) VENEER/COIL AND STRIP WARE, B) PVC/COIL AND STRIP WARE C) SOLID WOOD STRIPS MIN. EDGE HEIGHT = APPROX. 14 MM MAX. EDGE HEIGHT = APPROX. 55 MM MIN. EDGE TICKNESS = APPROX. 0,4 MM MAX. EDGE THICKNESS = APPROX. 20 MM MIN. PANEL THICKNESS = APPROX. 10 MM MIN. PANEL THICKNESS = APPROX. 16 MM AT USE OF THE MULTI FUNCTION UNIT MAX. PANEL THICKNESS = APPROX. 50 MM MIN. PANEL WIDTH = APPPROX . 60 MM MIN. PANEL LENGTH = APPROX. 150 MM MAX. STRIPS = APPROX. 20X50 MM PANEL SUPERNATANT FROM THE CHAIN CONVEYOR = APPROX. 35 MM PNEUMATIC CONNECTION: APPROX. 7 - 8 BAR THE BASIC MACHINE OF THE IMA-COMPACT-PC CONSISTING OF: A) BASIC FRAME AS WELL AS HOUSING FOR ELECTRO INSTALLATION B) DRIVE FOR THE WORKPIECE TRANSPORT VIA MECHANICAL CONTROLLABLE GEAR MOTOR, FEED SPEED APPROX. 8-20 M/MIN. (NOT THE SAME AS THE WORKING SPEED) C) CONVEYOR CHAIN (80 MM WIDE + 60 MM LONG CHAIN PLATES) D) TOP PRESSURE EQUIPPED WITH: 2 ROWS OF RUBBER COATED ROLLERS, HEIGHT ADJUSTMENT (APPROX. 50 MM) CENTRAL VIA HANDWHEEL E) IMATRONIC 121 SPS CONTROL WITH CENTRAL UNIT AND CONTROL PANEL; BRAND BECKHOFF F) ELECTRO INSTALLATION EN, SWITCH COMPONENTS IN BASIC FRAME, OPERATING ELEMENTS IN A SEPARATE CONTROL PANEL. I) MOVABLE SUPPORTING RAIL APPROX. 700 MM FOR WIDE WORKPIECES LINE VOLTAGE: 3/N/PE, 400/230 V, 50 HZ, +6/-10% WITH RESILIENT NEUTRAL WIRE ZEROING (FI CIRCUIT BREAKER JUST ALLOWED WITH A PULSE CURRENT-SENSITIVE GROUND FAULT INTERRUPTER) AT ORDER THE INFORMATION OF THE ELECTRO DATA SHEET ARE RELEVANT! DIFFERENCES HAVE TO BE ADDITIONALLY OFFERED (EXTRA CHARGE). (IF THE LINE VOLTAGE CAN NOT BE KEPT A VOLTAGE STABILIZER NEED TO BE INSTALLED AT THE EXPENSE OF THE MACHINE OPERATOR) CONTROL VOLTAGE: 24 V DC / 230 V AC LACQUERING: - BASIC MACHINE WITH HOODS: GREY WHITE RAL 9002 STRUCTURE - UNITS: DUST GREY RAL 7037 STRUKTURE U. SMOOTH - SAFETY COVERS: SIGNAL RED RAL 301 STRUCTURE - MOTORS: BLACK RAL 9005 SILK-MATT ADJUSTMENT VIA NC AXIS: HORIZONTAL ADJUSTABLE, UNHEATED INFEED FENCE, PRESSURE ZONE, FLUSH MILLING, MULTI FUNCTION UNIT, PROFILE SCRAPER PRE-MILLING UNIT FOR MILLING THE EDGE/CALIBRATING OF FORMATED WORKPIECES OR FOR MILLING OF SIDE GROOVES, CHAMFERS OR PROFILES, CONTROLLABLE, NOT SWIVABLE, WITHOUT TRACING, WITH 2 MOTORS á 3 KW, 400 V, 200 HZ, 12000 RPM, WORKING FLOW IN WORKING AND COUNTER WORKING DIRECTION, WITHOUT PROFILE TOOL, WITH 1 SINGLE SUCTION HOOD Ø 120 MM, WITH STATIC FREQUENCY INVERTER, HORIZONTAL AND VERTICALE ADJUSTMENT WITH MECHANICAL DIGITAL DISPLAY, WITH BLOWING NOZZLE FOR THE REMOVAL OF LOOSE PARTICLES FROM THE WORKPIECE SURFACE AND IR-HEATER. GLUING UNIT WITH CLOSED OIL-BATH GEAR, TEMPERATURE CONTROL WITH SEPARATE GLUE ROLLER DRIVE AND 1 MAIN PRESSURE ROLLER HOT MELT APPLICATION 0,8 L COMPL. WITH HEATING CARTRIDGE AND SUPLLY PLUG MAX. EDGE HEIGHT 50 MM SINGLE ROLLER/STRIP MAGAZINE, FEEDING ANGLE 8° FOR COIL MATERIAL UP TO 3 MM AND STRIPS UP TO 20 MM, END CUTTER PNEUMATIC CONTROLLED, UP TO 3 MM EDGE THICKNESS, MAX. EDGE CROSS SECTIONAL AREA 120 QMM, INCL. RESTRAINT DEVICE FOR THE COIL WARE, MAX. COILØ 860MM 5 RE-PRESSURE ROLLERS WITH MECH. DIGITAL DISPLAY, PRESSURE ROLLERS SINGLE SEITLICH SPRUNG AND ADJUSTBALE ON SIDE. END TRIMMING UNIT 2 MOTORS á 660 W, 400 V, 200 HZ., 12000 RPM, INSTALLED ON TOP PRESSURE FOR THE END TRIMMING OF THE FRONTAL AND REAR EDGE OR STRIP SUPERNATANT, FOR FLUSH OR CHAMFER CUTS WITH 2 HM-END TRIMMING SAW BLADES 160 X 22 MM Z=48, MIN. PANEL SUPERNATANT: APPROX. 30 MM + MAX. EDGE OR STRIP THICKNESS MIN. PANEL LENGTH: APPROX. 150 MM MIN. DISTANCE BETWEEN 2 WORKPIECES APPROX. 650 MM MAX. WORKING SPEED: 20 M/MIN. FRONTAL-/REAR EDGE TRACING SHOE MOVABLE MAX. EDGE HEIGHT 55 MM ,MAX. EDGE THICKNESS 20 MM HOR. PNEUM. SWIVABLE DEVICE 0+10° WITH PNEUMATICAL MOVABLE SIDE TRACING, MANUAL POSITIONABLE VIA DIGITAL DISPLAY, STATIC FREQUENCY INVERTER FOR MOTORS >0,75 UP TO 1,5 KW, INCL. FILTER AND BRAKE RESISTANCE POWER SUPPLY 3-PHASE, 400-480 V, +/-5%, 50/60 HZ MILLING UNIT FOR FLUSH MILLING FROM TOP AND BOTTOM, FOR 2 MOTORS á 1850 W, 400 V, 200 HZ, 12000 RPM MAX. APPROX. 3 DEGREES SWIVABLE (AT WORKPIECE THICKNESS OVER 25 MM), WITH HEIGHT TRACING, WITHOUT SIDE TRACING, MOTORS ORDERED ONE ABOVE THE OTHER, WITHOUT TOOL, WITH MECHANICAL DIGITAL DISPLAY 09 FOR THE VERTICAL ADJUSTMENT, WITH SINGLE SUCTION STUDS MOTOR WITH HSK-TOOL HOLDER, WORKING IN COUNTER DIRECTION STATICAL FREQUENCY CHANGER FOR MOTORS ?2,2 UP TO 4.0 KW, INCL. FILTER AND BRAKE RESISTANCE POWER SUPPLY 3-PHASE, 400-480 V, +/-5%, 50/60 HZ SOUND ABSORBING/SAFETY HOOD FOR END TRIMMING AND MILLING UNIT, SUCTION STUDS LX100 UND 2X80 TO THE TOP, MULTI FUNCT
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-the device is used to erode broken drills and taps up to about m 20 directly on the drill steel.
thereby, a copper - hollow electrode in the head is clamped.
the hollow electrode has a smaller diameter than the broken tool. in the edm, the core piece of the broken tool is broken down. the cutting loose and can be removed easily. because the electrode comes with the core of the hole not in touch, the thread remains intact. the usual operating drilling emulsion is used as a coolant
power 3.6 kva          
  THE DEVICE IS USED TO ERODE BROKEN DRILLS AND TAPS UP TO ABOUT M 20 DIRECTLY ON THE DRILL STEEL. THEREBY, A COPPER - HOLLOW ELECTRODE IN THE HEAD IS CLAMPED. THE HOLLOW ELECTRODE HAS A SMALLER DIAMETER THAN THE BROKEN TOOL. IN THE EDM, THE CORE PIECE OF THE BROKEN TOOL IS BROKEN DOWN. THE CUTTING LOOSE AND CAN BE REMOVED EASILY. BECAUSE THE ELECTRODE COMES WITH THE CORE OF THE HOLE NOT IN TOUCH, THE THREAD REMAINS INTACT. THE USUAL OPERATING DRILLING EMULSION IS USED AS A COOLANT POWER 3.6 KVA
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-multi edge magazine for edge banding machines\r\nmake: isas\r\ntype: performance\r\n\r\nlength approx. 2000mm\r\nwidth approx. 2000mm\r\n\r\nmax. edge coil-Ø: 760mm\r\nmax. edge height: 28mm\r\nmax. edge thickness: 2mm\r\n\r\nconsisting of:\r\n- base frame\r\nwith movable thrust plates for take of edge coils, central stored, \r\n1x side shaft for quick supply and higher edge coils\r\n\r\n- upper frame\r\n30 mechanical clamping lever\r\n2 festo axes system for edge systems and loosen the clamping\r\ndrive with servo motor frequency controlled\r\n2 transport rollers central splitted and stored for edge transport forward/backward\r\n\r\n- strip guidance / hopper\r\n\r\n- transfer plate to the machine, special construction\r\n\r\n- control technique\r\nswitch box on the machine, wired\r\nsps control\r\n4 frequency inverter in the switch box\r\npotential free contacts for previous machine\r\n\r\n- display and operator surface 1\r\ntouch panel tp 615 lc fix mounted at the edg magazine,\r\nworking memory 256 mb, application memory 128 mb\r\n\r\n- display and operator surface 1\r\nvia 3tec standard (software for edge- and list management)\r\n\r\ncompressed air supply  6 bar\r\n\r\n- software 3 tec (own developed)\r\nproductions control\r\nlist entering of edge (code) possible,\r\negde pre-selection possible,\r\nedge change at pc,\r\ndisplaying of errors and warnings,\r\nhand function for output switch functions\r\nshaft management\r\nexpanding for automatical process in the named order of production\r\n(quantity: 1 piece) via scanner-interface\r\noperation mix possible\r\n\r\noptional available:\r\n- 60-fold edge magazine \r\nlenght: approx. 2700mm\r\nwidth: approx. 2700mm\r\nupper frame with 60 mechanical clamping levers\r\n\r\n- 90-fold edge magazine\r\nlength approx. 3900mm\r\nwidth approx. 2500mm\r\nupper frame with 90 mechanical clamping levers\r\n\r\nvideo - englisch version >>> MULTI EDGE MAGAZINE FOR EDGE BANDING MACHINES\R\NMAKE: ISAS\R\NTYPE: PERFORMANCE\R\N\R\NLENGTH APPROX. 2000MM\R\NWIDTH APPROX. 2000MM\R\N\R\NMAX. EDGE COIL-Ø: 760MM\R\NMAX. EDGE HEIGHT: 28MM\R\NMAX. EDGE THICKNESS: 2MM\R\N\R\NCONSISTING OF:\R\N- BASE FRAME\R\NWITH MOVABLE THRUST PLATES FOR TAKE OF EDGE COILS, CENTRAL STORED, \R\N1X SIDE SHAFT FOR QUICK SUPPLY AND HIGHER EDGE COILS\R\N\R\N- UPPER FRAME\R\N30 MECHANICAL CLAMPING LEVER\R\N2 FESTO AXES SYSTEM FOR EDGE SYSTEMS AND LOOSEN THE CLAMPING\R\NDRIVE WITH SERVO MOTOR FREQUENCY CONTROLLED\R\N2 TRANSPORT ROLLERS CENTRAL SPLITTED AND STORED FOR EDGE TRANSPORT FORWARD/BACKWARD\R\N\R\N- STRIP GUIDANCE / HOPPER\R\N\R\N- TRANSFER PLATE TO THE MACHINE, SPECIAL CONSTRUCTION\R\N\R\N- CONTROL TECHNIQUE\R\NSWITCH BOX ON THE MACHINE, WIRED\R\NSPS CONTROL\R\N4 FREQUENCY INVERTER IN THE SWITCH BOX\R\NPOTENTIAL FREE CONTACTS FOR PREVIOUS MACHINE\R\N\R\N- DISPLAY AND OPERATOR SURFACE 1\R\NTOUCH PANEL TP 615 LC FIX MOUNTED AT THE EDG MAGAZINE,\R\NWORKING MEMORY 256 MB, APPLICATION MEMORY 128 MB\R\N\R\N- DISPLAY AND OPERATOR SURFACE 1\R\NVIA 3TEC STANDARD (SOFTWARE FOR EDGE- AND LIST MANAGEMENT)\R\N\R\NCOMPRESSED AIR SUPPLY 6 BAR\R\N\R\N- SOFTWARE 3 TEC (OWN DEVELOPED)\R\NPRODUCTIONS CONTROL\R\NLIST ENTERING OF EDGE (CODE) POSSIBLE,\R\NEGDE PRE-SELECTION POSSIBLE,\R\NEDGE CHANGE AT PC,\R\NDISPLAYING OF ERRORS AND WARNINGS,\R\NHAND FUNCTION FOR OUTPUT SWITCH FUNCTIONS\R\NSHAFT MANAGEMENT\R\NEXPANDING FOR AUTOMATICAL PROCESS IN THE NAMED ORDER OF PRODUCTION\R\N(QUANTITY: 1 PIECE) VIA SCANNER-INTERFACE\R\NOPERATION MIX POSSIBLE\R\N\R\NOPTIONAL AVAILABLE:\R\N- 60-FOLD EDGE MAGAZINE \R\NLENGHT: APPROX. 2700MM\R\NWIDTH: APPROX. 2700MM\R\NUPPER FRAME WITH 60 MECHANICAL CLAMPING LEVERS\R\N\R\N- 90-FOLD EDGE MAGAZINE\R\NLENGTH APPROX. 3900MM\R\NWIDTH APPROX. 2500MM\R\NUPPER FRAME WITH 90 MECHANICAL CLAMPING LEVERS\R\N\R\NVIDEO - ENGLISCH VERSION >>>
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-execution: unit type: stationary version: skid frame specifications engine: engine manufacturer: mercedes engine type: om 352 engine no.: 352.960-058023 motor power: 56 ps cooling: water-cooled starting: electric 24 v dc speed: 1500 rpm kraftst off: heating oil en 590 technical data generator: generator manufacturer: a. van kaick generator type: dibs 42/40-4 gene. no.: 40613 generator power: 45 kva voltage: 400 / 231 volts power factor: cos. -phi 0.8 speed: 1500 rpm switchgear: execution: auto-start features: emergency operation switch: generator switch 3 pin delivery: width is supplied loose mm: 900 height mm: 1,000 depth mm: 400 tank: desing ng: width tank via the generator about mm: 650 height mm: 270 depth mm: 610 content / liter: approx. 100 dimensions of the unit: mm width approx.: 700 height mm: 1,100 length mm: 2,100 weight kg: 950 use: state: well get built: 1981 l ieferzeit: now operating hours: 522 location: verl - germany stock number: 1088 
 EXECUTION: UNIT TYPE: STATIONARY VERSION: SKID FRAME SPECIFICATIONS ENGINE: ENGINE MANUFACTURER: MERCEDES ENGINE TYPE: OM 352 ENGINE NO.: 352.960-058023 MOTOR POWER: 56 PS COOLING: WATER-COOLED STARTING: ELECTRIC 24 V DC SPEED: 1500 RPM KRAFTST OFF: HEATING OIL EN 590 TECHNICAL DATA GENERATOR: GENERATOR MANUFACTURER: A. VAN KAICK GENERATOR TYPE: DIBS 42/40-4 GENE. NO.: 40613 GENERATOR POWER: 45 KVA VOLTAGE: 400 / 231 VOLTS POWER FACTOR: COS. -PHI 0.8 SPEED: 1500 RPM SWITCHGEAR: EXECUTION: AUTO-START FEATURES: EMERGENCY OPERATION SWITCH: GENERATOR SWITCH 3 PIN DELIVERY: WIDTH IS SUPPLIED LOOSE MM: 900 HEIGHT MM: 1,000 DEPTH MM: 400 TANK: DESING NG: WIDTH TANK VIA THE GENERATOR ABOUT MM: 650 HEIGHT MM: 270 DEPTH MM: 610 CONTENT / LITER: APPROX. 100 DIMENSIONS OF THE UNIT: MM WIDTH APPROX.: 700 HEIGHT MM: 1,100 LENGTH MM: 2,100 WEIGHT KG: 950 USE: STATE: WELL GET BUILT: 1981 L IEFERZEIT: NOW OPERATING HOURS: 522 LOCATION: VERL - GERMANY STOCK NUMBER: 1088
Vendedor: Aggregatebau WA Notstromtechnik GmbH
Año de construcción: usado
Precio: 6.200 EU€
Ubicación: Land-metal fach t710 / 1 is a universal agricultural trailer, self-unloading trailer intended for transporting loose materials with two axes. METAL FACH T710 / 1 IS A UNIVERSAL AGRICULTURAL TRAILER, SELF-UNLOADING TRAILER INTENDED FOR TRANSPORTING LOOSE MATERIALS WITH TWO AXES.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-• 6-axes industrial robot with rotrol ii control unit
• loading capacity max.: 130kg
• dalex transformer mf90-500
• roboter-c50-welding tong new in 2008
• electrode force max.: 2.800n at 4bar
• safety housing
• turntable 180° with two work holding devices for welding
• user manual • 6-AXES INDUSTRIAL ROBOT WITH ROTROL II CONTROL UNIT • LOADING CAPACITY MAX.: 130KG • DALEX TRANSFORMER MF90-500 • ROBOTER-C50-WELDING TONG NEW IN 2008 • ELECTRODE FORCE MAX.: 2.800N AT 4BAR • SAFETY HOUSING • TURNTABLE 180° WITH TWO WORK HOLDING DEVICES FOR WELDING • USER MANUAL
Vendedor: OSKAR BROZIAT GMBH & CO.KG MASCHINEN + SERVICE
Año de construcción: usado
Ubicación: Land-bore diameter: variabel mm<br/>number of heads horizontal: 3 st.<br/>number of heads vertical: 4 st.<br/>dimensions (l/w/h): 5950x1500x2050 mm<br/>weight: 1000 kg<br/>drilling and milling center götzinger power drill from our demonstration room <br/>in oberkochen<br/><br/>with the götzinger powerdrill you can, depending on the type and design:<br/><br/>- drill on the front and on the long side<br/>- dowels of front doors, pegs, fighters<br/>- the drilling patterns are freely programmable<br/>- you can drill: handle slides and corner bearings, with quick-change<br/>  multiple spindle<br/>- you can: milling lock case, pusher and pz as well as 3d bands and<br/>  drill<br/>- the machine has a horizontal and a vertical milling unit<br/>- a simple control lets you create drilling and milling programs,<br/>  save and call again<br/><br/>base frame in sturdy design, covered with sheet metal<br/><br/>table top 1800 x 200 mm<br/><br/>processing unit:<br/><br/>x-axis - 500 mm travel path<br/>y-axis - 100 mm<br/>z-axis - 105 mm<br/><br/>1 drilling unit horizontal<br/>--------------------------<br/>drilling motor 220 v, 1,100 w<br/>collet holder d = 8/10<br/>4,000 - 11,000 rpm adjustable<br/><br/>1 drilling unit vertically from above - fixed<br/>--------------------------<br/>drilling motor 1,1 kw, 3,000 rpm<br/>wellhead schnellwechseleinrichtung<br/><br/>1 boring head bkf 2/3, for corner bearing incl. drill set, quick-change<br/>--------------------------<br/>at the loose item<br/><br/>1 boring head bkf 3, for olive incl. drill set, quick-change<br/>--------------------------<br/>at the loose item<br/><br/>1 drilling unit horizontal<br/>--------------------------<br/>drilling motor 1.1 kw, infinitely variable<br/>4,000 - 11,000 rpm, with collet chuck d = 8/10 mm<br/><br/>1 milling unit for lock case horizontal<br/>--------------------------<br/>milling motor 2.2 kw<br/>variable speed 3,000 - 16,000 rpm<br/>collet holder er 25<br/><br/>1 milling unit for lock case vertical<br/>--------------------------<br/>milling motor 2.2 kw<br/>variable speed 3,000 - 16,000 rpm<br/>collet holder er 25<br/><br/>1 length stop right and left, usable length 2.6 m, nc controlled<br/><br/>control: electro-pneumatic with three-axis<br/>nc positioning controller and integrated machine function<br/>input via tft display, 10 color<br/><br/>machine ce-compliant<br/><br/>(techn.according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> BORE DIAMETER: VARIABEL MM
NUMBER OF HEADS HORIZONTAL: 3 ST.
NUMBER OF HEADS VERTICAL: 4 ST.
DIMENSIONS (L/W/H): 5950X1500X2050 MM
WEIGHT: 1000 KG
DRILLING AND MILLING CENTER GöTZINGER POWER DRILL FROM OUR DEMONSTRATION ROOM
IN OBERKOCHEN

WITH THE GöTZINGER POWERDRILL YOU CAN, DEPENDING ON THE TYPE AND DESIGN:

- DRILL ON THE FRONT AND ON THE LONG SIDE
- DOWELS OF FRONT DOORS, PEGS, FIGHTERS
- THE DRILLING PATTERNS ARE FREELY PROGRAMMABLE
- YOU CAN DRILL: HANDLE SLIDES AND CORNER BEARINGS, WITH QUICK-CHANGE
MULTIPLE SPINDLE
- YOU CAN: MILLING LOCK CASE, PUSHER AND PZ AS WELL AS 3D BANDS AND
DRILL
- THE MACHINE HAS A HORIZONTAL AND A VERTICAL MILLING UNIT
- A SIMPLE CONTROL LETS YOU CREATE DRILLING AND MILLING PROGRAMS,
SAVE AND CALL AGAIN

BASE FRAME IN STURDY DESIGN, COVERED WITH SHEET METAL

TABLE TOP 1800 X 200 MM

PROCESSING UNIT:

X-AXIS - 500 MM TRAVEL PATH
Y-AXIS - 100 MM
Z-AXIS - 105 MM

1 DRILLING UNIT HORIZONTAL
--------------------------
DRILLING MOTOR 220 V, 1,100 W
COLLET HOLDER D = 8/10
4,000 - 11,000 RPM ADJUSTABLE

1 DRILLING UNIT VERTICALLY FROM ABOVE - FIXED
--------------------------
DRILLING MOTOR 1,1 KW, 3,000 RPM
WELLHEAD SCHNELLWECHSELEINRICHTUNG

1 BORING HEAD BKF 2/3, FOR CORNER BEARING INCL. DRILL SET, QUICK-CHANGE
--------------------------
AT THE LOOSE ITEM

1 BORING HEAD BKF 3, FOR OLIVE INCL. DRILL SET, QUICK-CHANGE
--------------------------
AT THE LOOSE ITEM

1 DRILLING UNIT HORIZONTAL
--------------------------
DRILLING MOTOR 1.1 KW, INFINITELY VARIABLE
4,000 - 11,000 RPM, WITH COLLET CHUCK D = 8/10 MM

1 MILLING UNIT FOR LOCK CASE HORIZONTAL
--------------------------
MILLING MOTOR 2.2 KW
VARIABLE SPEED 3,000 - 16,000 RPM
COLLET HOLDER ER 25

1 MILLING UNIT FOR LOCK CASE VERTICAL
--------------------------
MILLING MOTOR 2.2 KW
VARIABLE SPEED 3,000 - 16,000 RPM
COLLET HOLDER ER 25

1 LENGTH STOP RIGHT AND LEFT, USABLE LENGTH 2.6 M, NC CONTROLLED

CONTROL: ELECTRO-PNEUMATIC WITH THREE-AXIS
NC POSITIONING CONTROLLER AND INTEGRATED MACHINE FUNCTION
INPUT VIA TFT DISPLAY, 10 COLOR

MACHINE CE-COMPLIANT

(TECHN.ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-drum dryer / firewood drying kiln with 50m³ filling volume 

made in germany 
year of production/ first installation: 2007 / 2008 

outside dimensions 15,00 x 2,90 m length x width 
diameter of boiler: 2,50 m 
volume of the container: 58m³ 
for loose wood pieces from 20 – 70 cm length 
filling volume when bulk produce 50m³ 
rotation speed in the drum is adjustable. 
plant is complete with heat exchanger 

heat exchanger max. power: 
90° flow temperature water – ca. 250 kw 
at 12m³/h medium volume 250 kw 
at 15° c outside temperature ca. 250 kw 

power: 
hydr. aggregate 3 kw 
blower 7,5 kw 
drum power 8kw 
hydr. oil filling: bio 10 l 
noise emissions ca 98 db 

power supply: 
current consumption 45 a 
hedging 63 a 
apply voltage 3l/pen 400 v
frequency 50 hz 

weight of the plant: approx.. 12,5 tons 
complete technical documentation is available 
ex location nearby hannover, germany 
dismantling, loading and transport can be done by us – price on request 


 DRUM DRYER / FIREWOOD DRYING KILN WITH 50M³ FILLING VOLUME MADE IN GERMANY YEAR OF PRODUCTION/ FIRST INSTALLATION: 2007 / 2008 OUTSIDE DIMENSIONS 15,00 X 2,90 M LENGTH X WIDTH DIAMETER OF BOILER: 2,50 M VOLUME OF THE CONTAINER: 58M³ FOR LOOSE WOOD PIECES FROM 20 – 70 CM LENGTH FILLING VOLUME WHEN BULK PRODUCE 50M³ ROTATION SPEED IN THE DRUM IS ADJUSTABLE. PLANT IS COMPLETE WITH HEAT EXCHANGER HEAT EXCHANGER MAX. POWER: 90° FLOW TEMPERATURE WATER – CA. 250 KW AT 12M³/H MEDIUM VOLUME 250 KW AT 15° C OUTSIDE TEMPERATURE CA. 250 KW POWER: HYDR. AGGREGATE 3 KW BLOWER 7,5 KW DRUM POWER 8KW HYDR. OIL FILLING: BIO 10 L NOISE EMISSIONS CA 98 DB POWER SUPPLY: CURRENT CONSUMPTION 45 A HEDGING 63 A APPLY VOLTAGE 3L/PEN 400 V FREQUENCY 50 HZ WEIGHT OF THE PLANT: APPROX.. 12,5 TONS COMPLETE TECHNICAL DOCUMENTATION IS AVAILABLE EX LOCATION NEARBY HANNOVER, GERMANY DISMANTLING, LOADING AND TRANSPORT CAN BE DONE BY US – PRICE ON REQUEST
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-welder cloos glc 403 quinto

technical data and photos here WELDER CLOOS GLC 403 QUINTO TECHNICAL DATA AND PHOTOS HERE
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-qty.1 second-hand robot sawing line
mfc.:	fill gesellschaft m.b.h.		built:	2007
sub-suppliers:	pneumatic – festo, bosch		hydraulic – bosch
	gear motors, servo motors, control units – sew & siemens	robot - kuka
	saw motors – perske		lubrication unit – vogel  
vibrating channels – jöst        control system 840d – siemens	
basic data of the designed sawing line
different cutting sequences:	90° - chop cuttings	cuts with parallel miter
cuts with opposite miter	cuts with turned profiles – 3d-layer cuts – left & right parts
saw blade change:	approx. 5 min.
loose chips are blown out of the sawn profiles via nozzles and air curtains in automatic mode.
profile definition		profile length:	max. 7200 mm
	finished length:	up to 1750 mm at double miter	80-2500 mm at chop cuttings
	angles: 	0° - 60°		profile height:		20 – 150 mm (chop cuttings)
frame & layer dimensions		in the frame:  1200 mm	to the saw:  1000 mm
	stack in defined stacking boxes	separate layers or reduced width to saw
short & long length		short length:	80 – 499 mm	transverse transport for destacking
	up to 500 mm 	along then cross transport
clamping rest		max. length:	175 mm to aim for 150 mm
transverse transport	- short profiles are advanced by the following material
-	 in this case, the transverse transport is arranged movable, so that there is enough free space for sawing available
permanently sound pressure level	approx. 80 db(a) - measured in front of the saw line
 QTY.1 SECOND-HAND ROBOT SAWING LINE MFC.: FILL GESELLSCHAFT M.B.H. BUILT: 2007 SUB-SUPPLIERS: PNEUMATIC – FESTO, BOSCH HYDRAULIC – BOSCH GEAR MOTORS, SERVO MOTORS, CONTROL UNITS – SEW & SIEMENS ROBOT - KUKA SAW MOTORS – PERSKE LUBRICATION UNIT – VOGEL VIBRATING CHANNELS – JöST CONTROL SYSTEM 840D – SIEMENS BASIC DATA OF THE DESIGNED SAWING LINE DIFFERENT CUTTING SEQUENCES: 90° - CHOP CUTTINGS CUTS WITH PARALLEL MITER CUTS WITH OPPOSITE MITER CUTS WITH TURNED PROFILES – 3D-LAYER CUTS – LEFT & RIGHT PARTS SAW BLADE CHANGE: APPROX. 5 MIN. LOOSE CHIPS ARE BLOWN OUT OF THE SAWN PROFILES VIA NOZZLES AND AIR CURTAINS IN AUTOMATIC MODE. PROFILE DEFINITION PROFILE LENGTH: MAX. 7200 MM FINISHED LENGTH: UP TO 1750 MM AT DOUBLE MITER 80-2500 MM AT CHOP CUTTINGS ANGLES: 0° - 60° PROFILE HEIGHT: 20 – 150 MM (CHOP CUTTINGS) FRAME & LAYER DIMENSIONS IN THE FRAME: 1200 MM TO THE SAW: 1000 MM STACK IN DEFINED STACKING BOXES SEPARATE LAYERS OR REDUCED WIDTH TO SAW SHORT & LONG LENGTH SHORT LENGTH: 80 – 499 MM TRANSVERSE TRANSPORT FOR DESTACKING UP TO 500 MM ALONG THEN CROSS TRANSPORT CLAMPING REST MAX. LENGTH: 175 MM TO AIM FOR 150 MM TRANSVERSE TRANSPORT - SHORT PROFILES ARE ADVANCED BY THE FOLLOWING MATERIAL - IN THIS CASE, THE TRANSVERSE TRANSPORT IS ARRANGED MOVABLE, SO THAT THERE IS ENOUGH FREE SPACE FOR SAWING AVAILABLE PERMANENTLY SOUND PRESSURE LEVEL APPROX. 80 DB(A) - MEASURED IN FRONT OF THE SAW LINE
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: 1.550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-karmetal band saw

type kmt 220

-traploos instelbare lintzaag snelheid
-ver stek â° 60
-zaagdruk hydraulic regelbaar
-snelspanklem
-koeling
-afslag automatic
-noodstop
-documentatie
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) KARMETAL BAND SAW TYPE KMT 220 -TRAPLOOS INSTELBARE LINTZAAG SNELHEID -VER STEK &ACIRC;&DEG; 60 -ZAAGDRUK HYDRAULIC REGELBAAR -SNELSPANKLEM -KOELING -AFSLAG AUTOMATIC -NOODSTOP -DOCUMENTATIE -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-1 of used wrap-around packer, make khs/kisters, type wp 060 v (quick change-over via servos and spindles), new 2008, operating side left. capacity upto 60 cycles/minute. siemens s7 controls with rexroth mi-technology servo drives. nordson problue 50 hot-melt unit. used to pack various glass bottles (diameters 59 - 80 mm) as 4x2, 4x6 and 3x4 loose in wrap-around cartons. 1 OF USED WRAP-AROUND PACKER, MAKE KHS/KISTERS, TYPE WP 060 V (QUICK CHANGE-OVER VIA SERVOS AND SPINDLES), NEW 2008, OPERATING SIDE LEFT. CAPACITY UPTO 60 CYCLES/MINUTE. SIEMENS S7 CONTROLS WITH REXROTH MI-TECHNOLOGY SERVO DRIVES. NORDSON PROBLUE 50 HOT-MELT UNIT. USED TO PACK VARIOUS GLASS BOTTLES (DIAMETERS 59 - 80 MM) AS 4X2, 4X6 AND 3X4 LOOSE IN WRAP-AROUND CARTONS.
Vendedor: ERMI HOLLAND B.V.
Año de construcción: usado
Precio: 1.350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 2.950 €
Ubicación: Land-stephan vm100 vacuum mixer used

separator for liquid and solid media
slice the clock cover loose
time switches are defective, machine running in continuous operation
machine to drain and operate with low content tiltable
boiler capacity approx.: 140 litres
batch sizes: up to 100 liters
machine is heavily polluted and must be thoroughly cleaned prior to use
pressure gauge pointer is broken off, missing screw of the mixed use
locking lever must be checked, extends when swivelling back boiler by alone set
limit switches must be on the lid are made accessible at all times and readjusted

video about test run and more pictures available

mengtumbler, tumblers, vacuum tumbler, mixers, mixing machine, blender

STEPHAN VM100 VACUUM MIXER USED SEPARATOR FOR LIQUID AND SOLID MEDIA SLICE THE CLOCK COVER LOOSE TIME SWITCHES ARE DEFECTIVE, MACHINE RUNNING IN CONTINUOUS OPERATION MACHINE TO DRAIN AND OPERATE WITH LOW CONTENT TILTABLE BOILER CAPACITY APPROX.: 140 LITRES BATCH SIZES: UP TO 100 LITERS MACHINE IS HEAVILY POLLUTED AND MUST BE THOROUGHLY CLEANED PRIOR TO USE PRESSURE GAUGE POINTER IS BROKEN OFF, MISSING SCREW OF THE MIXED USE LOCKING LEVER MUST BE CHECKED, EXTENDS WHEN SWIVELLING BACK BOILER BY ALONE SET LIMIT SWITCHES MUST BE ON THE LID ARE MADE ACCESSIBLE AT ALL TIMES AND READJUSTED VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE MENGTUMBLER, TUMBLERS, VACUUM TUMBLER, MIXERS, MIXING MACHINE, BLENDER
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: 29.000 €
Ubicación: Land-product description according to the manufacturer:<br />
pallet supply the unit is equipped with a pallet lift with a range segment. there is also a manual supply and disposal of the machine with pallets (for example, with electric pallet truck, ant, etc.) from three sides possible. in this case, a ceiling height of 3 m is sufficient.<br />
<br />
construction year: new<br />
 zero operating hours<br />
<br />
container processing:<br />
processed are container without film such as folding cartons, boxes with loose lids or trays with and without cover. the basic machine is suitable for palletizing column layer patterns. interlocked layer can be realized by an optional pack turning facility. an optional intermediate layer processing is also possible<br />
<br />
remarks:<br />
never in use  fair copy. stand a few years in the warehouse. with siemens s7 controller.<br />
<br />
built in 2007 and was never in use !!!<br />
<br />
<br />
special price exclusive supply and installation<br />
availability:<br />
immediatelly<br />
<br />
capacity:<br />
150 lagen/h<br />
<br />
width:<br />
2360 mm<br />
<br />
height:<br />
2850mm<br />
<br />
length:<br />
4480 mm<br />
<br />
:<br />
das ist ein freitext<br />
<br />
description:<br />
30 °<br />
<br />
<br />

<br />
besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines.<br />
you have a first idea or even a concrete plan? it does not matter how far your project is, we support you in every phase!<br />
or do you want to sell or market your machine? we also buy machines or provide you with a marketing concept.<br />
ask for your individual offer or visit us in knetzgau. concerning bigger projects we can of course also visit you in your company to do an on-site survey.<br />
our drink technicians are working worldwide for our customers!<br />
we are looking forward to hearing from you.<br />
<br />
all information is supplied without guarantee. PRODUCT DESCRIPTION ACCORDING TO THE MANUFACTURER:
PALLET SUPPLY THE UNIT IS EQUIPPED WITH A PALLET LIFT WITH A RANGE SEGMENT. THERE IS ALSO A MANUAL SUPPLY AND DISPOSAL OF THE MACHINE WITH PALLETS (FOR EXAMPLE, WITH ELECTRIC PALLET TRUCK, ANT, ETC.) FROM THREE SIDES POSSIBLE. IN THIS CASE, A CEILING HEIGHT OF 3 M IS SUFFICIENT.

CONSTRUCTION YEAR: NEW
ZERO OPERATING HOURS

CONTAINER PROCESSING:
PROCESSED ARE CONTAINER WITHOUT FILM SUCH AS FOLDING CARTONS, BOXES WITH LOOSE LIDS OR TRAYS WITH AND WITHOUT COVER. THE BASIC MACHINE IS SUITABLE FOR PALLETIZING COLUMN LAYER PATTERNS. INTERLOCKED LAYER CAN BE REALIZED BY AN OPTIONAL PACK TURNING FACILITY. AN OPTIONAL INTERMEDIATE LAYER PROCESSING IS ALSO POSSIBLE

REMARKS:
NEVER IN USE FAIR COPY. STAND A FEW YEARS IN THE WAREHOUSE. WITH SIEMENS S7 CONTROLLER.

BUILT IN 2007 AND WAS NEVER IN USE !!!


SPECIAL PRICE EXCLUSIVE SUPPLY AND INSTALLATION
AVAILABILITY:
IMMEDIATELLY

CAPACITY:
150 LAGEN/H

WIDTH:
2360 MM

HEIGHT:
2850MM

LENGTH:
4480 MM

:
DAS IST EIN FREITEXT

DESCRIPTION:
30 °



BESIDES BUYING AND SELLING OF CONVEYORS AND MACHINES OUR STRENGTH LIES PARTICULARLY IN SERVICES AND PROJECT PLANNING, AS FOR EXAMPLE IN REBUILDING AND ADAPTING OF YOUR INSTALLATION AS WELL AS IN OVERHAUL AND RELOCATION OF MACHINES.
YOU HAVE A FIRST IDEA OR EVEN A CONCRETE PLAN? IT DOES NOT MATTER HOW FAR YOUR PROJECT IS, WE SUPPORT YOU IN EVERY PHASE!
OR DO YOU WANT TO SELL OR MARKET YOUR MACHINE? WE ALSO BUY MACHINES OR PROVIDE YOU WITH A MARKETING CONCEPT.
ASK FOR YOUR INDIVIDUAL OFFER OR VISIT US IN KNETZGAU. CONCERNING BIGGER PROJECTS WE CAN OF COURSE ALSO VISIT YOU IN YOUR COMPANY TO DO AN ON-SITE SURVEY.
OUR DRINK TECHNICIANS ARE WORKING WORLDWIDE FOR OUR CUSTOMERS!
WE ARE LOOKING FORWARD TO HEARING FROM YOU.

ALL INFORMATION IS SUPPLIED WITHOUT GUARANTEE.
Vendedor: DRINK Getränkemaschinen GmbH
Año de construcción: usado
Ubicación: Land-1 used weishaupt light oil burners
-----------------------------------------------
type: l 7 z
version: d
: kw 320 1.957
oil capacity: 27-165 kg / h
year of construction: 2000
ce mark: ce 0036

with loos enclosure, built in 2004 and
siemens control panel, type c7, simatic year 2014
1 USED WEISHAUPT LIGHT OIL BURNERS ----------------------------------------------- TYPE: L 7 Z VERSION: D : KW 320 1.957 OIL CAPACITY: 27-165 KG / H YEAR OF CONSTRUCTION: 2000 CE MARK: CE 0036 WITH LOOS ENCLOSURE, BUILT IN 2004 AND SIEMENS CONTROL PANEL, TYPE C7, SIMATIC YEAR 2014
Vendedor: Hermann Sprenger GmbH
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 500 mm<br/>height: 110 mm<br/>daylight: 240 mm<br/>external diameter: futter 320 mm<br/>external diameter: spannhebel 700 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 500 MM
HEIGHT: 110 MM
DAYLIGHT: 240 MM
EXTERNAL DIAMETER: FUTTER 320 MM
EXTERNAL DIAMETER: SPANNHEBEL 700 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 29 €
Ubicación: Land-heavy, high quality gratings (metal trays), support grid for pallet racks, over 3,500 pieces inserted, - used -:
 
price per grid: â?¬49 (net)
 
price in loss of at least 100 unit: 45.-â?¬ (net)
 
price in loss of at least 500 pieces: â?¬39.50 (net)
 
price in loss of at least 1,000 pieces: â?¬35 (net)
 
price in loss of the entire amount: 29.-â?¬ (net)
 
㨠per technical level in length approx. 2, 70 m 2 gratings needed!
 
grid floor for pallet racks, tie bar flush set
-for storing loose parts
-for the safety of passages and corridors
 
manufacturer, type: unknown
year of construction: 1997
gratings are high quality nature! these are hung between the truss levels.
 
left of the supporting surface (i.e. where the grating on the trusses lie on) and right are 3 each, 5 cm wide.
height approx 4 cm, per grating
maschweite: approx. 3.5 x 3, 5cm
weight: approx. 27kg / piece
 
dimensions per grid:
type 1: (main)
outside: ca width: 1, 33 m, depth: approx. 1m,.
inside: approx. width: 1, 33 m, depth: ca. 0, 94m,.
left of the supporting surface (i.e. where the grating on the trusses lie on) and right are 3 each, 5 cm wide.
height approx 4 cm, per grating
 
type 2: (rates on request)
exterior: approx. width: 1, 33 m, depth: approx. 1, 205m,.
inside: approx. width: 1, 33 m, depth: approx. 1, 13 m,.
i.e., the bottom left and right are 3 approx., 5 cm wide.
height approx 4 cm, per grating
 
 
type 3: (rates on request)
exterior: approx. width: 1, 34 m, depth: approx. 0, 995m,.
inside: approx. width: 1, 34 m, depth: ca. 0, 94m,.
the flat surface of this type of left and right are each approx. 2, 5 cm wide.
height approx. 3 cm per grating
 
 
type 4: (rates on request)
outside: ca width: 1, 27 m, depth: approx. 1, 20 m,
inside: approx. width: 1, 27 m, depth: approx. 1, 13 m,.
the flat surface of this type of left and right are each approx. 3, 5 cm wide.
height approx 4 cm, per grating
 
 
type 5: (rates on request)
outside: ca width: 1, 88 m, depth: approx. 1, 215m,.
inside: approx. width:? m, depth: approx. 1, 14 m,.
the flat surface of this type are each approximately 4 cm left and right.
 
 
type 6: (rates on request)
outside: ca width: 1, 33 m, depth: approx. 0, 985m,.
inside: approx. width: 1, 33 m, depth: approx. 0, 93m,.
the flat surface of this type of left and right are each approx. 2, 5 cm wide.
 
 
new price about 125-â?¬150 (net) / piece
 
gratings have been used in the following rack:
manufacturer: thyssen
type: multipal-n
year of construction: 1997
frame height: approx. 7, 20 m
max pallet load: approx. 666 kg / pallet or 1,000 kg for cross storage of pallets!
maximum load capacity:
profile: 100/20 x 2680mm: 2000kg
profile: u 100 x 2680mm: 2000kg
frame depth: 1, 05 m
traverse length: 2, 68 m beam width or depth: 5 cm
condition: good (the system is speed led little damage)
available: available now
location: room 71522 backnang HEAVY, HIGH QUALITY GRATINGS (METAL TRAYS), SUPPORT GRID FOR PALLET RACKS, OVER 3,500 PIECES INSERTED, - USED -: PRICE PER GRID: &ACIRC;?&NOT;49 (NET) PRICE IN LOSS OF AT LEAST 100 UNIT: 45.-&ACIRC;?&NOT; (NET) PRICE IN LOSS OF AT LEAST 500 PIECES: &ACIRC;?&NOT;39.50 (NET) PRICE IN LOSS OF AT LEAST 1,000 PIECES: &ACIRC;?&NOT;35 (NET) PRICE IN LOSS OF THE ENTIRE AMOUNT: 29.-&ACIRC;?&NOT; (NET) &ATILDE;&UML; PER TECHNICAL LEVEL IN LENGTH APPROX. 2, 70 M 2 GRATINGS NEEDED! GRID FLOOR FOR PALLET RACKS, TIE BAR FLUSH SET -FOR STORING LOOSE PARTS -FOR THE SAFETY OF PASSAGES AND CORRIDORS MANUFACTURER, TYPE: UNKNOWN YEAR OF CONSTRUCTION: 1997 GRATINGS ARE HIGH QUALITY NATURE! THESE ARE HUNG BETWEEN THE TRUSS LEVELS. LEFT OF THE SUPPORTING SURFACE (I.E. WHERE THE GRATING ON THE TRUSSES LIE ON) AND RIGHT ARE 3 EACH, 5 CM WIDE. HEIGHT APPROX 4 CM, PER GRATING MASCHWEITE: APPROX. 3.5 X 3, 5CM WEIGHT: APPROX. 27KG / PIECE DIMENSIONS PER GRID: TYPE 1: (MAIN) OUTSIDE: CA WIDTH: 1, 33 M, DEPTH: APPROX. 1M,. INSIDE: APPROX. WIDTH: 1, 33 M, DEPTH: CA. 0, 94M,. LEFT OF THE SUPPORTING SURFACE (I.E. WHERE THE GRATING ON THE TRUSSES LIE ON) AND RIGHT ARE 3 EACH, 5 CM WIDE. HEIGHT APPROX 4 CM, PER GRATING TYPE 2: (RATES ON REQUEST) EXTERIOR: APPROX. WIDTH: 1, 33 M, DEPTH: APPROX. 1, 205M,. INSIDE: APPROX. WIDTH: 1, 33 M, DEPTH: APPROX. 1, 13 M,. I.E., THE BOTTOM LEFT AND RIGHT ARE 3 APPROX., 5 CM WIDE. HEIGHT APPROX 4 CM, PER GRATING TYPE 3: (RATES ON REQUEST) EXTERIOR: APPROX. WIDTH: 1, 34 M, DEPTH: APPROX. 0, 995M,. INSIDE: APPROX. WIDTH: 1, 34 M, DEPTH: CA. 0, 94M,. THE FLAT SURFACE OF THIS TYPE OF LEFT AND RIGHT ARE EACH APPROX. 2, 5 CM WIDE. HEIGHT APPROX. 3 CM PER GRATING TYPE 4: (RATES ON REQUEST) OUTSIDE: CA WIDTH: 1, 27 M, DEPTH: APPROX. 1, 20 M, INSIDE: APPROX. WIDTH: 1, 27 M, DEPTH: APPROX. 1, 13 M,. THE FLAT SURFACE OF THIS TYPE OF LEFT AND RIGHT ARE EACH APPROX. 3, 5 CM WIDE. HEIGHT APPROX 4 CM, PER GRATING TYPE 5: (RATES ON REQUEST) OUTSIDE: CA WIDTH: 1, 88 M, DEPTH: APPROX. 1, 215M,. INSIDE: APPROX. WIDTH:? M, DEPTH: APPROX. 1, 14 M,. THE FLAT SURFACE OF THIS TYPE ARE EACH APPROXIMATELY 4 CM LEFT AND RIGHT. TYPE 6: (RATES ON REQUEST) OUTSIDE: CA WIDTH: 1, 33 M, DEPTH: APPROX. 0, 985M,. INSIDE: APPROX. WIDTH: 1, 33 M, DEPTH: APPROX. 0, 93M,. THE FLAT SURFACE OF THIS TYPE OF LEFT AND RIGHT ARE EACH APPROX. 2, 5 CM WIDE. NEW PRICE ABOUT 125-&ACIRC;?&NOT;150 (NET) / PIECE GRATINGS HAVE BEEN USED IN THE FOLLOWING RACK: MANUFACTURER: THYSSEN TYPE: MULTIPAL-N YEAR OF CONSTRUCTION: 1997 FRAME HEIGHT: APPROX. 7, 20 M MAX PALLET LOAD: APPROX. 666 KG / PALLET OR 1,000 KG FOR CROSS STORAGE OF PALLETS! MAXIMUM LOAD CAPACITY: PROFILE: 100/20 X 2680MM: 2000KG PROFILE: U 100 X 2680MM: 2000KG FRAME DEPTH: 1, 05 M TRAVERSE LENGTH: 2, 68 M BEAM WIDTH OR DEPTH: 5 CM CONDITION: GOOD (THE SYSTEM IS SPEED LED LITTLE DAMAGE) AVAILABLE: AVAILABLE NOW LOCATION: ROOM 71522 BACKNANG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 200 mm<br/>height: 67,5 mm<br/>daylight: 65 mm<br/>external diameter: futter 100 mm<br/>external diameter: spannhebel 360 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 200 MM
HEIGHT: 67,5 MM
DAYLIGHT: 65 MM
EXTERNAL DIAMETER: FUTTER 100 MM
EXTERNAL DIAMETER: SPANNHEBEL 360 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-description

robust mid-sized vertical form fill seal (vffs) machine. the ilapak vegatronic 1000 is a high-quality entry-level automatic intermittent bagger running pillow bags, block bottom bags, quattro and pouches for dry and wet applications with the option of modified atmosphere packaging (map).

ilapak's vegatronic series of vertical packaging machinery can produce the highest quality and most innovative range of pack styles, whilst delivering flexibility and exceptional performance. the vegatronic series is ideal for loose products, fresh or frozen produce, powders, granulated products and liquids.

wrapping materials: heat sealable materials, such as polypropylene, barrier films, laminates, as well as polyethylene films.

features                    
•manufacturer: ilapak
•model: vegatronic vt 1000
•function: vertical form fill sealing machine
•capacity: 100 bags / minute
•serial number: 0700708006
•year of manufacture: 2008
•total installed power: 5kw
•electrics: 400v / 50 hz / 3 phase
•see 'technical doc' link for further details
•bag size:
•min. width: 50mm (2 DESCRIPTION ROBUST MID-SIZED VERTICAL FORM FILL SEAL (VFFS) MACHINE. THE ILAPAK VEGATRONIC 1000 IS A HIGH-QUALITY ENTRY-LEVEL AUTOMATIC INTERMITTENT BAGGER RUNNING PILLOW BAGS, BLOCK BOTTOM BAGS, QUATTRO AND POUCHES FOR DRY AND WET APPLICATIONS WITH THE OPTION OF MODIFIED ATMOSPHERE PACKAGING (MAP). ILAPAK'S VEGATRONIC SERIES OF VERTICAL PACKAGING MACHINERY CAN PRODUCE THE HIGHEST QUALITY AND MOST INNOVATIVE RANGE OF PACK STYLES, WHILST DELIVERING FLEXIBILITY AND EXCEPTIONAL PERFORMANCE. THE VEGATRONIC SERIES IS IDEAL FOR LOOSE PRODUCTS, FRESH OR FROZEN PRODUCE, POWDERS, GRANULATED PRODUCTS AND LIQUIDS. WRAPPING MATERIALS: HEAT SEALABLE MATERIALS, SUCH AS POLYPROPYLENE, BARRIER FILMS, LAMINATES, AS WELL AS POLYETHYLENE FILMS. FEATURES •MANUFACTURER: ILAPAK •MODEL: VEGATRONIC VT 1000 •FUNCTION: VERTICAL FORM FILL SEALING MACHINE •CAPACITY: 100 BAGS / MINUTE •SERIAL NUMBER: 0700708006 •YEAR OF MANUFACTURE: 2008 •TOTAL INSTALLED POWER: 5KW •ELECTRICS: 400V / 50 HZ / 3 PHASE •SEE 'TECHNICAL DOC' LINK FOR FURTHER DETAILS •BAG SIZE: •MIN. WIDTH: 50MM (2") •MAX. WIDTH: 370MM (14.5") •LENGTH: 380MM (15") DIMENSIONS •DEPTH: 232.5 CMS •WIDTH: 128 CMS •HEIGHT: 128.5 CMS •WEIGHT: 800 KGS COUNTRY OF MANUFACTURE ITALY
Vendedor: Machinery World Ltd
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 400 mm<br/>height: 95 mm<br/>daylight: 170 mm<br/>external diameter: futter 250 mm<br/>external diameter: spannhebel 600 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 400 MM
HEIGHT: 95 MM
DAYLIGHT: 170 MM
EXTERNAL DIAMETER: FUTTER 250 MM
EXTERNAL DIAMETER: SPANNHEBEL 600 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-1 used steam boiler
---------------------------
manufacturer: loos gunzenhausen
type: u-hd 1250
heating surface approx.				: 20 sqm
power max.				: 1.250 kg/h
operating pressure: 13,00 bar
higher test pressure: 24.05 bar
water content at nw ca		: 993 l
water content fully ca			: 1,365 l
year of construction: 2003
ce marking: ce 0036

equipped with weishaupt leichtöl burner l7, cabinet, feed water pump
and the existing coarse and fine fittings.
1 USED STEAM BOILER --------------------------- MANUFACTURER: LOOS GUNZENHAUSEN TYPE: U-HD 1250 HEATING SURFACE APPROX. : 20 SQM POWER MAX. : 1.250 KG/H OPERATING PRESSURE: 13,00 BAR HIGHER TEST PRESSURE: 24.05 BAR WATER CONTENT AT NW CA : 993 L WATER CONTENT FULLY CA : 1,365 L YEAR OF CONSTRUCTION: 2003 CE MARKING: CE 0036 EQUIPPED WITH WEISHAUPT LEICHTöL BURNER L7, CABINET, FEED WATER PUMP AND THE EXISTING COARSE AND FINE FITTINGS.
Vendedor: Hermann Sprenger GmbH
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 300 mm<br/>height: 67,5 mm<br/>daylight: 100 mm<br/>external diameter: futter 150 mm<br/>external diameter: spannhebel 480 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 300 MM
HEIGHT: 67,5 MM
DAYLIGHT: 100 MM
EXTERNAL DIAMETER: FUTTER 150 MM
EXTERNAL DIAMETER: SPANNHEBEL 480 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-1 used steam boiler
---------------------------
manufacturer: loos gunzenhausen
type: u-hd 1250
heating surface approx.				: 20 sqm
power max.				: 1.250 kg/h
operating pressure: 10 bar
higher test pressure: 18 bar
water content at nw ca		: 993 l
water content fully ca			: 1,365 l
year of construction: 2002
ce marking: ce 0036

equipped with weishaupt light oil burner l7, cabinet, feed water pump
and the existing coarse and fine fittings.
1 USED STEAM BOILER --------------------------- MANUFACTURER: LOOS GUNZENHAUSEN TYPE: U-HD 1250 HEATING SURFACE APPROX. : 20 SQM POWER MAX. : 1.250 KG/H OPERATING PRESSURE: 10 BAR HIGHER TEST PRESSURE: 18 BAR WATER CONTENT AT NW CA : 993 L WATER CONTENT FULLY CA : 1,365 L YEAR OF CONSTRUCTION: 2002 CE MARKING: CE 0036 EQUIPPED WITH WEISHAUPT LIGHT OIL BURNER L7, CABINET, FEED WATER PUMP AND THE EXISTING COARSE AND FINE FITTINGS.
Vendedor: Hermann Sprenger GmbH
Año de construcción: usado
Ubicación: Land-current intensivity: 270 a<br/>performance dc max: 230 a<br/>performance ac max: 270 a<br/>weight of the machine ca.: 250 kg<br/>watercooled tig hose package: 4000 mm<br/>included:<br/>pressure regulator with flowmeter<br/><br/>good condition, leakage at the cooling device! has to be solded!<br/><br/><br/><br/><br/> CURRENT INTENSIVITY: 270 A
PERFORMANCE DC MAX: 230 A
PERFORMANCE AC MAX: 270 A
WEIGHT OF THE MACHINE CA.: 250 KG
WATERCOOLED TIG HOSE PACKAGE: 4000 MM
INCLUDED:
PRESSURE REGULATOR WITH FLOWMETER

GOOD CONDITION, LEAKAGE AT THE COOLING DEVICE! HAS TO BE SOLDED!




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-1 used steam boiler
---------------------------
make: loos, gunzenhausen
type: u-hd
heating surface approx.				: 53 sqm
capacity: 3,200 kg / h
previously operated with: 3.75 bar
operating pressure maximum in accordance with construction and pressure test: 10 bar
higher test pressure: 18 bar
water content at nw ca		: 2,650 l
water content fully ca			: 3,770 l
year of construction: 1995

equipped with weishaupt oil burner, mounted cabinet, on the body of the boiler feedwater pump and the existing coarse and fine fittings.
1 USED STEAM BOILER --------------------------- MAKE: LOOS, GUNZENHAUSEN TYPE: U-HD HEATING SURFACE APPROX. : 53 SQM CAPACITY: 3,200 KG / H PREVIOUSLY OPERATED WITH: 3.75 BAR OPERATING PRESSURE MAXIMUM IN ACCORDANCE WITH CONSTRUCTION AND PRESSURE TEST: 10 BAR HIGHER TEST PRESSURE: 18 BAR WATER CONTENT AT NW CA : 2,650 L WATER CONTENT FULLY CA : 3,770 L YEAR OF CONSTRUCTION: 1995 EQUIPPED WITH WEISHAUPT OIL BURNER, MOUNTED CABINET, ON THE BODY OF THE BOILER FEEDWATER PUMP AND THE EXISTING COARSE AND FINE FITTINGS.
Vendedor: Hermann Sprenger GmbH
Año de construcción: usado
Ubicación: Land-control: rotrol 16 <br/>number of controlled axis: 6 + 2 <br/>0: 10 kg<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.: 5,5x3,4x2,9 m<br/>it is a complete robot welding system of the type cloos romat<br/>76aw with tilting tables, welding power source cloos quinto profi sd and<br/>control cabinet + documentation.<br/>the robotic arm has 6 axes + 2 axes of rotation / tilt table makes 8 total<br/><br/>the plant has about 3000h operating hours and is functional.<br/><br/><br/><br/><br/> CONTROL: ROTROL 16
NUMBER OF CONTROLLED AXIS: 6 + 2
0: 10 KG
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: 5,5X3,4X2,9 M
IT IS A COMPLETE ROBOT WELDING SYSTEM OF THE TYPE CLOOS ROMAT
76AW WITH TILTING TABLES, WELDING POWER SOURCE CLOOS QUINTO PROFI SD AND
CONTROL CABINET + DOCUMENTATION.
THE ROBOTIC ARM HAS 6 AXES + 2 AXES OF ROTATION / TILT TABLE MAKES 8 TOTAL

THE PLANT HAS ABOUT 3000H OPERATING HOURS AND IS FUNCTIONAL.




Vendedor: IMZ Maschinen Vertriebs GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)