lot of 2 todas las categorias

Ubicación: CNC LATHE GILDEMEISTER CTX 400 SERIES 2 WITH CONTROL ELTROPILOT 4290 YEAR OF CONSTRUCTION: 2003 CIRCULATION O ABOUT BED RAIL: 570 MM CIRCULATION O ON PLAN MANAGEMENT: 420 MM PLAN TRAVEL: 220 MM LONGITUDINAL TRAVEL: 635 MM SPINDLE BORE: 79 MM SPEED RANGE: 25-5000 RPM WITH THE FOLLOWING ACCESSORIES: SLIDING SCREEN DESIGN WITH INTERIOR LIGHTING 12 STATION TURRET WITH 6 DRIVEN STATIONS 3 JAW CHUCK RÃ?HM 0 160 MM (HYDRAULIC) CHIP CONVEYOR WITH COOLING DEVICE TWO PRESSURE COOLANT SYSTEM COLLET CHUCK HAINBUCH CHUCK FOOT SWITCH + TAILSTOCK TAILSTOCK WITH QUILL 5 PCS. MACHINE SHOES OPERATING INSTRUCTIONS

Ubicación: : 6 MM
: 3.100 MM
: 1,5 °
: 1.000 MOTORISCH MM
: 15 KW
: 4.180 MM
: 2.400 MM
: 2.000 MM
: 7.650 KG
SWING CUT CONSTRUCTION
NC-PRESELECTION SYSTEM D-TOUCH 7 WITH TOUCH SCREEN FOR BACK GAUGE, CUTTING LENGTH, QUANTITY, USB PORT
MOTORIZED BACK GAUGE 1000 MM ON BALL SCREWS, FOLDING UPWARDS
CLEAR CONTROL PANEL MOUNTED ON MOVEABLE ARM 
HYDRAULIC HOLD DOWN PISTONS ARE ARRANGED CLOSE TO THE CUTTING EDGE 
FOOT SWITCH 
CENTRAL, MANUAL BLADE GAP ADJUSTMENT 
CUTTING LINE ILLUMINATION 
BROAD TABLE WITH BALLS
PIECE COUNTER
SINGLE AND CONTINOUS STOKE
FOLD UP FINGER GUARD 1.000 MM
1 SQUARING ARM 1. 500 MM WITH SCALE, T-SLOT AND TILTING CAM 
2 SUPPORTING ARMS 1.000 MM WITH T-SLOT
SIMPLE REPLACEMENT AND GRINDING OF THE BLADES 
VARIABLE ADJUSTABLE CUTTING LENGTH FOR ECONOMIC PROCESSING 
LOWER BLADE FOURFOLD TURNABLE 
UPPER BLADE DOUBLE TURNABLE
OILFILLING
LIGHT BARRIER ON THE BACK OF THE MACHINE
QUALIFIED CUSTOMER SUPPORT 
USER MANUAL IN GERMAN AND ENGLISH
MACHINE IN CONFORMITY WITH CE-REGULATIONS

OPTIONAL PNEUMATIC SHEET SUPPORT, ? 4.750,--

WE HAVE MORE THAN 850 REFERENCES!

SHEET THICKNESS: 6 MM
CUTTING LENGTH: 3.100 MM
CUTTING ANGLE: 1,5°
BACK GAUGE: MOTORIZED 1.000 MM
MOTOR POWER: 15 KW
LENGTH:4.180 MM
WIDTH: 2.400 MM
HEIGTH: 2.000 MM
WEIGHT: 7.650 KG

Ubicación: FURNACE (1,600 ° C) SMA-REF-6414 CATEGORY: FURNACES MANUFACTURER: AEG ELOTHERM TYPE: MTG 2000 CRUCIBLE: CAPACITY: 2-2,5 T WORKING RANGE: TEMPERATURE: 1,600 ° C MAX : KW 1,000 CAST: 2,5 T / H STEEL: 2 T / H INGREDIENTS: OVEN ELECTR. CONTROL OPERATOR CONTROL BOOTH WATER COOLING PROTECTIVE DEVICES SPARE SPOOL (NEW) SPARE PARTS, PUMPS, ETC. WITHOUT TRANSFORMER CONDITION: READY FOR USE OVERHAULED IN 2004 LOCATION: NORDRHHEIN-WESTFALEN DIMENSIONS: WEIGHT: 1.5 T AVAILABILITY: IMMEDIATELY TERMS OF DELIVERY: FROM SITE FREE TRUCK LOADING TERMS OF PAYMENT: 100% PRIOR TO REMOVAL/LOADING

Ubicación: : 40 MM
: M 24
: M 30
SPINDLE TURNING SPEED - STEPLESS: 160-2250 U/MIN
: MK 3
SPINDLE STROKE: 120 MM
THROAT: 293 MM
COLUMN DIAMETER: 115 MM
: 515X360 MM
DISTANCE SPINDLE /TABLE: MIN./MAX. 117/701 MM
: 2 X 14 X 224 MM
FEED: 0,1 + 0,2 MM/U
MACHINE HEIGHT: 1840 MM
WEIGHT: 270 KG
DRIVE MOTOR: 1,0/1,6 KW
STANDARD EQUIPMENT:
- MAIN SWITCH (LOCKABLE) WITH OVERLOAD PROTECTION SWITCH
- SELF LOCKING MUSHROOM BUTTON FOR EMERGENCY-OFF SWITCH
- INFINITELY VARIABLE SPEED DRIVE
- DIGITAL RPM READ-OUT
- PROTECTION CLASS IP 54
- SPINDLE PROTECTION WITH ELECTRIC SECURITY
- LACQUER: DD-STRUCTURED GREY RAL 7035, ANTHRACITE RAL 7016

POS. 12
LED MACHINE LIGHT, WITH RADIALLY ADJUSTABLE LIGHT BEAM AND ON/OFF SWITCH

POS. 20.1
TAPPING ATTACHMENT, (AUTOMATIC REVERSE) WITH ADDITIONAL FOOT SWITCH, MAX. 6
TAPPED HOLES PER MINUTE (TAPPING CAPACITY DEPENDING ON RPM SPEED)

POS. 24
COOLANT ATTACHMENT A, CONSISTING OF:
COOLANT BASE PLATE WITH GRINDED SURFACE 320 X 320 MM AND 2 SLOTS, OVERLOAD
PROTECTED PUMP AND ACCESSORIES

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - 2 AUXILIARY TRANSFORMERS 15.000 V - 3.000 V (T3A, T4A) FROM 10 MVA - YEAR 1951 - NO. 1 TRANSFORMER FORMER STATION ENI - 250 KVA - 15,000 V - 380 V - YEAR 1975 OIL-FREE TRANSFORMERS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: CONSISTING OF VARIOUS CLAMPING JAWS, HAND TOOLS, INDEXABLE INSERTS, SUITABLE FOR LOT 20

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - VARIOUS LADDERS - MEMMERT OVEN FOR SILICA GEL - DIELECTRIC OIL ANALYSIS TOOL - OLD COPPER TRANSFORMERS - CABINETS WITH SMALL ELECTRICAL SPARE PARTS - MISCELLANEOUS EQUIPMENT FROM BROKEN WORKSHOP MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 830 X 370 X 850 MM
DESCRIPTION: FACE PLATE WITH A DIAMETER OF 800 MM, PASSAGE APPROX. 135 MM, FACE PLATE WIDTH APPROX. 145 MM

Ubicación: * SCHNEIDER SENATOR 76 E-LINE YEAR OF CONSTRUCTION: 1997 E-LINE VERSION AIR TABLE 2 X SIDE TABLES WITH AIR SPARE BLADE AVAILABLE NOW!

Ubicación: WEIGHT APPROX.: 400 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 600 MM
DESCRIPTION: CONSISTING OF VARIOUS LATHE TOOLS, 14 MULTIFIX QUICK-CLAMPING CASSETTES SIZE D, SUITABLE FOR LOT 20

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - MANUAL PRESS - FLAG TYPE GUDGEON - WELDING MACHINE FOR PEAD UP TO 200 MM - VARIOUS WELDING FITTINGS MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: WEIGHT APPROX.: 8500 KG
DIMENSIONS (L X W X H) APPROX.: 4700 X 3800 X 2700 MM
DESCRIPTION: TRAVELS X-AXIS 1000 MM, Y-AXIS 560 MM, Z-AXIS 800 MM, SPINDLE: TOOL HOLDER ISO 50, QUILL STROKE OF THE WORKING SPINDLE 125 MM, SPEEDS AND FEEDS: WORKING SPINDLE 20 TO 2000 RPM, FEED IN THE AXES X/Y/Z 1 TO 4000 MM/MIN., FEED FORCE IN THE X- AND Z-AXIS 8000 N, FEED FORCE IN THE Y-AXIS 24000 N, RAPID TRAVERSE IN ALL THREE AXES 6 M/MIN., TOTAL CONNECTED LOAD OF THE MACHINE 62.7 KVA, CONTROL PHILLIPS CNC 432, THE MACHINE HAS A B-AXIS, TECHNICAL DATA OF THE UNIVERSAL BUILT-IN ROTARY TABLE: CLAMPING SURFACE DIAMETER 1250 X 800 MM, CENTRING HOLE 42 MM, NUMBER OF T-SLOTS 7, ROTATABILITY OF THE TABLE PLATE 360°, MAX. TABLE LOAD 800 KG, SEE ATTACHED PDF DOCUMENT FOR FURTHER DETAILS

Ubicación: COMPL. LINE FOR PLASTIC FENSTERSMA-REF-6396KATEGORIE: PLASTIC WINDOW CONSTRUCTION COMPLETE PRODUKTIONSLINIENHERSTELLER: URBANBAUJAHR: 2001LEISTUNG: UP TO 30 WINDOWS PER 8 H SCHICHTMIT 3 MANNMASCHINEN: 1) DOUBLE MITER SAW HAFFNER DGS 187 K (1995) 2) COLD SAWS TRS 275 K () 2001) 3) WATER SLOT MILLING WS 95 K (2001) 4) COPY MILLING CUTTER M OLIVENBOHREINHEIT ((2001)5) SINGLE HEAD WELDING MACHINE AKS 1105 (2001) 6) TWO HEAD WELDING MACHINE AKS 5305/2 FF (2001) 7) PLASTERING MACHINE URBAN SV 480 (1995) 8) SNAP CUTTER GRAULE AKF 6/250 (2001) 9) SUCTION (2001) 10 ) GLASS STRIP SAW (2001) 11) SCREW FEEDER (2001) 12) STORAGE RACK FOR PROFILES (2001) 13) PROFILE CAR PWL 100 (2001) 14) REEL STAND (2001) 15) BENCH SWIVELING STH 2500 (2001) 16) WING MOUNTING STATION FMS 2430 (2010) 17) FITTING SHELF (2010) 18) BAND SAW (2010 ) 19) GLAZING PRESS 3,000 X 2,200 MM (2010) AND VARIOUS ACCESSORIES, ROLLER CONVEYORS, ETC. CONDITION: READY FOR USE IN STROMSTANDORT: BAYERNVERFüGBARKEIT: SOFORTLIEFERBEDINGUNGEN: LKWZAHLUNGSBEDINGUNGEN LOADED FROM STANDORTFREI: 100% PRIOR TO REMOVAL/LOADING

Ubicación: WEIGHT APPROX.: 20000 KG
DIMENSIONS (L X W X H) APPROX.: 9000 X 5000 X 5000 MM
DESCRIPTION: TABLE DIMENSIONS 3000 X 800 MM, NUMBER OF T-SLOTS 5, MAX. TABLE LOAD 5000 KG, TRAVEL X-AXIS 3000 MM, Y-AXIS 900 MM, Z-AXIS 1000 MM, FEEDS STEPLESS 1 - 5000 MM/MIN., MILLING HEAD IS ADJUSTABLE IN 2,5°, MAX. FEED FORCE IN ALL THREE AXES 25000 N, TOOL CHANGER WITH 24 TOOL PLACES, FOOTPRINT OF THE MACHINE 36 M², SPINDLE CONE HOLDER ISO 50, SWIVELLING AROUND THE SLIDING AXIS AUTOMATIC INDEXING IN 144 POSITIONS OF 2.5° (-180 TO +180°), DISTANCE SPINDLE NOSE FROM TABLE FROM TABLE 130 TO 1030 MM, SPINDLE SPEED STEPLESS 11 TO 2500 RPM, 22 KW (MAIN MOTOR), MAX. TORQUE AT THE SPINDLE 1200 NM, SPINDLE DIAMETER IN FRONT BEARING 100 MM, CONTROL HEIDENHAIN TNC 407 (MONITOR POWER SWITCH IS DEFECTIVE, OTHERWISE OTHERWISE EVERYTHING IS FUNCTIONAL)

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - MODEL M 200 LC6 - 18 KW MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR YOU CAN CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 300 X 200 MM
DESCRIPTION: THE CONTROL UNIT REGULATES THE AIR PRESSURE OF ALL COMPRESSORS (LOT 110, 111, 112)

Ubicación: GENERAL INFORMATION: BUILT IN 1999 CONTROL HEIDENHAIN TNC 410 TRAVERSE PATHS X 600 MM Y 400 MM Z 600 MM SPINDLE: MAXIMUM SPEED 9,000 RPM TABLE: DIMENSIONS 750 X 450 MM T-SLOT 14 MM H12 X 100 MM (MITTELNUT 14 MM H8) NUMBER OF T-SLOTS 3 TOOL CHANGER AND MAGAZINE: MAXIMUM TOOL LENGTH 225 MM MAX TOOL DIAMETER 100 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 130 MM MAXIMUM TOOL WEIGHT 6 KG MAXIMUM NUMBER OF TOOLS 24 CHUCK SK40 DIMENSIONS AND WEIGHT: 3.8 M X 3.5 M WEIGHT OF 3,200 KG

Ubicación: WEIGHT APPROX.: 4100 KG
DIMENSIONS (L X W X H) APPROX.: 2650 X 1700 X 2850 MM
DESCRIPTION: HAUSER S35-400 THREAD CUTTING MACHINE

ADJUSTMENT RANGES IN THE X-AXIS (TABLE SLIDE) 500 MM, IN THE Y-AXIS (CROSS SLIDE) 300 MM, IN THE W-AXIS (GRINDING HEAD) 450 MM
FEED AND PROCESSING SPEED IN THE X-AND Y-AXIS (CNC-CONTROLLED) 0-1200 MM/MIN, ADJUSTMENT SPEED 0-1200 MM/MIN
IN THE W-AXIS THREE-PHASE DRIVE APPROX. 900 MM/MIN
SMALLEST DISPLAY UNIT X, Y, U 0,0001 MM, SMALLEST DISPLAY UNIT Z 0,001 MM, SMALLEST DISPLAY UNIT C 0,0001°, ZERO POINT ARBITRARILY SELECTABLE
REASON DEVIATION X, Y, 0,003 MM
USABLE TABLE SURFACE 600 X 380 MM, PERMISSIBLE TABLE LOAD MAX. 250 KG, WIDTH OF THE T-SLOTS 10 MM, NUMBER OF T-SLOTS 6, DISTANCE BETWEEN THE T-SLOTS 50 MM
GRINDING SPINDLE SPEED INFINITELY VARIABLE, WITH ELECTRIC MOTORS 4500 - 80000 MIN1, WITH AIR TURBINES UP TO 100000 AND 160000 MIN1
PLANETARY SPEED C INFINITELY VARIABLE 5-250 MM1, NC/C INFINITELY VARIABLE 0-5 MIN1
WITH QUICK STROKE Z INFINITELY VARIABLE 0. 5-12000 MIN1, MAX- STROKE FREQUENCY 4 HZ
STROKE LENGTH Z INFINITELY VARIABLE (SHZ) MAX. 110 MM, STROKE LENGTH Z (MANUAL OPERATION) MAX. 120 MM, DIAMETER 100 MM, WEIGHT COMPENSATION PNEUMATIC
RADIAL INFEED OF THE GRINDING WHEEL NC/U 5. 5 MM
, CYLINDRICAL GRINDING (WITH DISC DIAMETER 100 MM, WITHOUT INTERMEDIATE PLATE MAX. DIAMETER 230 MM, WITH INTERMEDIATE PLATE MAX. DIAMETER 360 MM
INCLUDED ANGLE MAX. 16°, GRINDING DEPTH AT MAX. ANGLE MAX. 44 MM
,

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - SEAWATER CL ANALYZER ORION 1770 - MOISTURE ANALYZER - SIEMENS O2 ANALYZER - SICK ANALYSERS WITH SPARE PARTS - SIEMENS SO2 ANALYZER - SMOKE MOISTURE ANALYZER MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR YOU CAN CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: CAPACITY: 55000 BOTTLES/H
MAX. FILLING PRESSURE: 7 BAR
VOLUME PRODUCT-RING BOWL: 550 L
POWER CONSUMPTION: 25 KW
WEIGHT: 19 T
FORMATS: BOTTLE FORMATS: 0,33 L VICHY-BOTTLES, 0,5 L NRW-BOTTLES, BOTTLE DIAMETER: 50-75 MM, BOTTLE HEIGHT: 150-330 MM
MACHINE PITCH: FILLING VALVES: 130, DIVISION OF THE VALVES: 87 MM, CLOSURE HEADS: 26, DIVISION OF THE CLOSURE HEADS: 87 MM
DIRECTION: RIGHT-LEFT
OPERATION / CONTROL: SIEMENS S7
BASIC CONSTRUCTION: 10 CALOTTE FEET
EQUIPMENT: FILLING VALVES WITH INTEGRATED HOT WATER SCOURING, AUTOMATIC FILLING HEIGHT ADJUSTMENT, FOAMING BY MEANS OF AUTOMATICALLY POSITIONING HDE, BOTTLE CONTROL, AIR CO2 STERILIZER,
ACCESSORIES: CLOSING CONTAINER WITH MINI / MAXI CONTACT, MECHANICAL QUICK CLAMPING FOR FORMAT PARTS

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - HOISTS - TOOL MAGAZINE OFF. MECC. (EXCLUDING HOISTS) - HYDRAULIC JACKS - STEEL LIFTING ROPES - PNEUMATIC DRILLS - KEYS OF VARIOUS SIZES - LIFTING SLING BAR MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR YOU CAN CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: FILLING 6 KG, CAP. APPROX. 100 KG/H\R\N(EACH FILLING APPROX. 2 MIN.)\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW\R\N

Ubicación: MERCURY AUCTIONS IS OVERSEEING THE SALE OF WAREHOUSES AND EXTENSIVE EQUIPMENT OF ENEL POWER STATION OF GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA, VIA THE FORMER SEAPLANE BASE. THE VISIONS OF ASSETS ARE ORGANIZED INTO 19 26 12 TUESDAYS, MARCH 2 AND 9, AND ON APRIL, 9 A.M. TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. -MEASURING INSTRUMENTS MECHANICAL WORKSHOP (GAUGES) WILL SELL SEVERAL LOTS WHOSE FULL CATALOGUE IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 IN BUSINESS HOURS 9-13, 14:18

Ubicación: MANUFACTURER AVERMANN
TYP AVOS BP 1410 S 37-70
YEAR OF CONSTRUCTION 2003
WORKING HOURS 17,532 H
PRESS POWER MAIN PRESS 70 TONS
SPECIFIC PRESS CAPACITY 90,9 N/CM²
FEED CHANNEL 1.400 X 1.000 MM (L X W)
THEORETIC CYCLE TIME 10 SEC.
THROUGHPUT RATE 360 CBM/H
BALE SIZE 1.100 X 700 MM (W X H) LENGTH ADJUSTABLE
DRIVING MOTOR 37 KW
TYING SYSTEM 4-FOLD VERTICAL, FULLY AUTOMATED
THROUGHPUT RATE MAX. APPROX. 15 TONS/H
BALE WEIGHT UNTIL 550 KG
BALER DIMENSIONS BUILT UP WITH HOPPER APPROX. 8,390 X 2,355 X 3,780 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER APPROX. 8,390 X 2,355 X 2,800 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 15 TONS

COMMENTS: THE MACHINE WAS OVERHAULED END OF 2018 AND TESTED WITH MATERIAL.
AS AN OPTIONAL EXTRA, THE PRESS WAS EQUIPPED WITH A SPECIAL RAM, WHICH ONLY OPENS THE NEEDLE SLOTS HYDRAULICALLY DURING THE BINDING PHASE. WITH THIS FEATURE THE PRESS IS ABLE TO PRESS DIFFICULT MATERIALS AND RELIABLY TIE UP.

INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. BRAND BIMAK MOD: 13DA MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR YOU CAN CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: MANUFACTURER AVERMANN
TYP AVOS 1810S-90/100
YEAR OF CONSTRUCTION 2005
HOURS OF OPERATION 23,072 H
QUANTITY OF PRESSED BALES 16,163 PIECE
PRESS POWER MAIN PRESS 100 TONS
SPECIFIC PRESS CAPACITY 121,2 N/CM²
FEED CHANNEL 1,000 X 1,800 MM
CAPACITY PER CYCLE TIME 1,35 CM³
THEORETIC CYCLE TIME 12,5 SEC.
BALE SIZE 1,100 X 750 MM
DRIVING MOTOR 2 X 45 KW
CONNECTED LOAD 130 KW
TYING SYSTEM 5 FOLD VERTICAL, FULL AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 12,2 TONS/H
BULK WEIGHT OF 50 KG/CBM APPROX. 16,0 TONS/H
BULK WEIGHT OF 100 KG/CBM APPROX. 23,2 TONS/H
BALE WEIGHT 500 UP TO 800 KG, DEPENDS ON MATERIAL AND BALE LENGTH
VOLUME HYDRAULIC OIL TANK 2,000 L
SPS CONTROLLER (MANUF., TYPE) SIEMENS SIMATIC S7-300
TRANSPORT DIMENSIONS ONLY BALER 11.200 X 2.355 X 2.700 MM (WITHOUT FEEDING CHUTE)
MACHINE WEIGHT BALER APPROX. 24,5 TONS
ACCESSORIES: RUFFLER AND SPECIAL PRESS RAM

COMMENTS:
THE MACHINE IS EQUIPPED WITH A SPECIAL PRESSING RAM, WHICH OPENS THE NEEDLE SLOTS HYDRAULICALLY ONLY DURING THE BINDING PROCESS. WITH THIS FEATURE THE PRESS IS ABLE TO PRESS DIFFICULT MATERIALS AND RELIABLY TIE UP.

THE DOCUMENTATION (MANUAL, CE, ELECTR./HYDR.-DRAWINGS), ARE COMPLETELY AVAILABLE. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - GRINDING WHEELS - CUTTING MACHINE - SMALL MISCELLANEOUS EQUIPMENT MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR YOU CAN CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 4 ST.
SPINDLE DIAMETER: 60/50 MM
CONTROL: JA
!! MACHINE IS STILL IN USE !!

WINDOW SYSTEM GUBISCH EST-H 2000


ABLäNGSäGE
----------------
ENGINE 3 KW
SPEED: 3,000 RPM
SAW BLADE DIAMETER: 400 MM
FLANGE DIAMETER: 80 MM
ADJUSTMENT: HORIZONTAL: MANUAL AFTER MECHANICAL DISPLAY
ADJUSTMENT RANGE: 0 - 120 MM

LENGTH STOP
----------------------
LENGTH 3,250 MM, BY HAND

SLOT SPINDLE
-------------------
ENGINE 9.2 KW
SPINDLE SPEED: 4,500 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 300 MM
SPINDLE STROKE VERTICAL: 3 X 100 MM FOR IV 68 - IV 92
TOOL DIAMETER: MAX. 400 / MIN 240 MM
ADJUSTMENT: HORIZONTAL U. VERTICALLY IN THE U-HUB
ADJUSTMENT RANGE: VERTICAL 210 MM UNDER TABLE
NUMBER OF TOOLS: 3 TOOL SETS A 100 MM

SHORTEST WORKPIECES: 320 MM + SPIGOT


CLAMPING TABLE
----------------------

ON BALL GUIDE BUSHES AND ROLLER GUIDES

SWIVEL RANGE: YES, 60 DEGREES IN BOTH DIRECTIONS
SPEEDS: 0-28 M / MIN. INFINITELY VARIABLE, 4 SPEED RANGES
TYPE OF COUNTER-TIMBER: COUNTER-DISC FOR 6 TOOL CONTOUR CONTOURS, THE
BE AUTOMATICALLY CONTROLLED FOR THE INTENDED TOOL SETS.
HANDOVER: AUTOMATICALLY
MODE OF OPERATION: INDIVIDUAL PRODUCTION, FRAME-BY-FRAME PRODUCTION AND MASS
PRODUCTION POSSIBLE

LONGITUDINAL PROFILING
----------------------

1. PROFILE SPINDLE WITH SYNCHRONOUS DIPPING AUTOMATIC
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
EQUAL AND COUNTER RUN FOR TEAR-FREE REFOLDING
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

2. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 100 - 240 MM

3. PROFILE SPINDLE
--------------------
ENGINE 9.2 KW
SPINDLE SPEED 6,000 RPM
SPINDLE DIAMETER: 50 MM
SPINDLE LENGTH: 200 MM
SPINDLE STROKE VERTICAL: 2 X 100 MM FOR IV 68 - IV 92
CIRCLE DIAMETER: 240 MM

4. SPINDLE GLASS BEAD SAWING UNIT, HORIZONTALLY ABOVE
-------------------------------------------------- --------------------
ENGINE 3 KW
REVOLUTIONS: 3000 RPM
ADJUSTMENT: HORIZONTAL HIGH-LOW
CIRCLE DIAMETER: 250 MM
CLAMPING FLANGE HOLDER: 60 MM DIAMETER
PNEUMATIC GLAZING BEAD STRIP WITH NON-RETURN VALVE

OTHER FEATURES
-------------------------
UMFäLZEINRICHTUNG
LUBRICANT PUMP MAN.
OUTFEED ROLLER
SUPPORT RAIL, SWING-OUT AS FRAME SUPPORT, FROM 500 MM TO 1000 MM
TO FOLD OVER

12 INCH SCREEN CONTROL

OPTION:
********
USED WINDOW TOOLS OPPOLD IV 68/78 WOOD 13ER ACHSMAß
BORE: 60/50
140 DRAINAGE EDGE
SLOT: ZERO 322


(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)

Ubicación: X-TRAVEL: 1080MM, Y-TRAVEL: 710MM, Z-TRAVEL: 710MM, ROTATIONAL SPEED: 12,000/MIN, MAX. SPINDLE POWER: 15KW, TOOL CONE: SK 40, NUMBER OF TOOL SLOTS: 32, CONTROLS: GILDEMEISTER TNC 430, OPERATIONAL/ SPINDLE HOURS: CA. 35,000/ 10,000H, LENGTH: 3500MM, WIDTH: 2500MM, HEIGHT: 2650MM, WEIGHT: 9.5T, WITHOUT COOLANT SYSTEM, Y-AXIS TRACK NEEDS OVERHAULING.

Ubicación: WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 300 X 100 MM
DESCRIPTION: LOT OF MILLING TOOLS
DIAMATERS 10 - 15 - 25 MM
FOR FURTHER INFORMATION SEE PHOTOS

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. MODEL: D2 HP: 2.5 220 V 50 HZ 2860 RPM WILL SELL SEVERAL LOTS WHOSE FULL CATALOGUE IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 IN BUSINESS HOURS 9-13, 14:18

Ubicación: WEIGHT APPROX.: 30 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 750 X 100 MM
DESCRIPTION: LOT OF 18 MILLING TOOLS
DIAMATER 50 MM
FOR FURTHER INFORMATION SEE PHOTOS

Ubicación: USED SET UP INT. MACHINE NUMBER: M2748 MANUFACTURER MARTIN TYPE T 51 PLANING WIDTH 510 MM TASK TABLE LENGTH 1,400 MM TAX TABLE LENGTH 1,100 MM WEIGHT 850 KG TOTAL LENGTH APPROX. 2.75 M 4-DRUM SLOTTED TABLE LIPS HYDRAULIC TABLE ADJUSTMENT WITH GAUGE AND VARIOUS KNIVES ITEM LOCATION: 58730 FRöNDENBERG/RUHR THE MACHINE CAN BE VISITED LIKE TO SEE POWER AND TRIED OUT. WE WILL GLADLY SEND YOU MORE PHOTOS BY E-MAIL. A FORKLIFT/CRANE FOR LOADING IS AVAILABLE. WE RESERVE THE RIGHT TO A SALE. THERE IS THE WAY LEARNED TO EXAMINE SUBURB FOR SALE ARTICLES. SPECIFIC QUESTIONS SHOULD BE CLARIFIED IN ADVANCE. THE INFORMATION, TECHNICAL DATA, DIMENSIONS, YEAR, CONDITION ARE NON-BINDING AND WERE SHOWN TO THE BEST OF MY KNOWLEDGE AND BELIEF. ERRORS ARE RESERVED. THE WARRANTY / GUARANTEE IS EXCLUDED. THE GOODS WILL BE SOLD FROM LOCATION / CAMP, WITH NATIONAL TRANSFER OF RISK TO THE BUYER, THIS ALSO APPLIES TO A SHIPPING FROM US, WHICH WE HAVE CARRIED OUT ON YOUR BEHALF. THIS OFFER IS ONLY TO TRADERS, MERCHANTS AND LEGAL PERSONS. SPECIFIED TRADE NAMES, AND TRADEMARKS ARE PROPERTY OF THEIR OWNERS AND ARE USED ONLY FOR IDENTIFICATION AND DESCRIPTION OF PRODUCTS. THE STRUCTURE AND THE ELECTRICAL CONNECTION OF THE MACHINE / THE DEVICE MUST BE CARRIED OUT BY A QUALIFIED PERSON TRAINED OR CHECKED. SEE ALSO MY OTHER OFFERS. THE ARTICLE MUST BE PAID UNLESS OTHERWISE AGREED WITHIN 14 DAYS OF INVOICE CREATION AND PICKED UP. OTHERWISE, THE COST OF THE STORAGE CHARGE MUST BE MADE.

Ubicación: WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 200 X 50 MM
DESCRIPTION: LOT OF 6 MILLING TOOLS
DIAMATER 50 MM
FOR FURTHER INFORMATION SEE PHOTOS

Ubicación: WALDRICH COBURG MACHINE NAME SLOTTING MACHINE MANUFACTURER WALDRICH COBURG MODEL 5V LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION COBURG TABLE DIA 1250MM STROKE LENGTH 1300MM CENTER TO BACK 1300MM

Ubicación: WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 300 X 260 MM
DESCRIPTION: LOT OF MILLING TOOLS FOR MOULDER 40 MM DIAMETER
12 UNITS OF ø 125 X 50 X 40 MM
1 UNIT OF ø 125 X 120 X 40 MM
2 UNITS OF ø 125 X 30 X 40 MM

Ubicación: STANKO MACHINE NAME SLOTTING MACHINE MANUFACTURER STANKO MODEL NA LOCATION MUMBAI YEAR OF MANUFACTURING NA TECHNICAL SPECIFICATION STROKE LENGTH 250MM CENTER TO BACK 500MM

Ubicación: WEIGHT APPROX.: 1 KG
DIMENSIONS (L X W X H) APPROX.: 230 X 100 X 50 MM
DESCRIPTION: STOPPERS TO ADJUST THE BLADES OF THE MILLING GROUPS
FOR MORE INFORMATION SEE PHOTOS

Ubicación: OMERA EDGE BANDING MACHINE SPECIFICATIONS: OMERA R3 / 7-3 MOUNTED ON T - SLOT TABLE (1300 X 1000 MM) TWO-HAND OPERATING VOLTAGE 380 V WEIGHT 2000 KG THE MOTOR OF THE MACHINE HAS BEEN ELECTRICALLY TESTED AND WORKS FINE. OTHER FUNCTIONS OF THE MACHINE COULD NOT BE TESTED. AN INVOICE IS CREATED FOR YOU. THE VAT ID ACCORDING TO § 25A VAT ACT DOES NOT APPLY.

Ubicación: WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 400 X 280 MM
DESCRIPTION: PROTECTIVE SCREENS FOR SPINDLE MOULDER AXIS
MAXIMUM WORKING DIAMETER 160 MM
MINIMUM WORKING RADIUS 200 MM
MAXIMUM ELEVATION OF THE SCREEN 120 MM
DIAMETER OF THE OUTLET HOLE 110 MM
CE STANDARDS

Ubicación: AUTOM. SHELF STOCK OR AKL, 7.584 SHELF PLOTS, 250 KG LOAD CAPACITY, TABLARMAÃ?E 1.230 MM X 620 MM X 150 MM / 250 MM - USED -: PRICE FROM SITE: Â?¬225.000.-(NET) PLUS MONTAGES ETC.! 2-G SHELF WAREHOUSE WITH JUST DEEP STORAGE AND CONVEYOR SYSTEMS FOR THE CONNECTION OF 2 JOBS MANUFACTURER: TGW, A-4600 WELS TYPE: SHELF STORAGE YEAR OF CONSTRUCTION / OPERATION: 07.2007 DESCRIPTION: · LENGTH OF THE STREETS: CA 51M · HEIGHT OF THE SHELVES: CA 9, 3 M · SPRINKLER SYSTEM: NO STACKER CRANES O NUMBER: 2 O TYPE: STRATUS, LIFTING: SPECTRA RACK SYSTEM O NUMBER SHELF LOCATION: 7.584 SPECIALIST LOAD: 250 KG O SHELVES: § NUMBER OF SHELVES: 5.280 PCS., GALVANIZED STEEL (2MMM), SMOOTH GROUND ON 2 OPPOSITE SIDES WITH BAR CODE TAGS § DIMENSIONS: 1.230MM X 620MM X 150MM / 250MM § SEKTORIERUNG OF THE SHELVES POSSIBLE · CONVEYOR: 1 CROSS REVERSE THRUST CAR OF THE TWO STREETS AND TWO JOBS CONNECTS · NUMBER OF JOBS: 2 - CONCURRENT USE OF PAGING POSSIBLE / · SYSTEM PERFORMANCE: O RACK SERVING UNIT: BASED ON 76 AND PAGING / H IN THE DOUBLE PLAY CONDITION: GOOD AVAILABLE: FROM APPROXIMATELY APRIL 2020! LOCATION: AUSTRIA MORE PHOTOS ON REQUEST!

Ubicación: WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 250 MM
DESCRIPTION: PROTECTIVE SCREENS FOR SPINDLE MOULDER AXIS
FOR FURTHER INFORMATION SEE PHOTOS.

Ubicación: 5 HL QUANTITIES 6 HL TANK CAPACITY STEAM JACKET HEATING IN THE LAUTER TUN AND MASH TANK IN ADDITION ELECTRIC HEATING FOR OPERATION OF THE MASH TANK WITH 400V 32AMP / 20KW HEATING ELEMENTS (HEATING COIL CAN BE REMOVED) AGITATOR IN THE MASH TANK E.G. FOR SYRUP MAKING ICED TEA, ETC. HACK WORK FROM MARC FUNCTION WHIRPOOLFUNKTION SIGHT GLASS IN THE PIPES LAUTER SIGHT GLASS CIP SYSTEM RING NOZZLE ANSCHWäNZEN WATER 8CM MINERAL WOOL INSULATION STEEL SHEET 3 MM INNER TANK STEEL SHEET 2 MM PANEL LASERGESCHNITTENEN LAUTERING PLATE (REMOVABLE) MARC LECH TO THE OFF GRAINS MANHOLES WITH SIGHT GLASS 2 X 0, 7KW AGITATOR MOTORS ADJUSTABLE KALLOTENFUSS WORKING PLATFORM BETWEEN TWO TANKS PLATE COOLER COOLER SPICE 6 M 2 WORT AERATION ECKROHRSIEB(HOPFENSIEB) SEASONING 2 X 5 M MILK PIPE DN 50 HOSE PUMP STAINLESS STEEL 304 L

Ubicación: WEIGHT APPROX.: 16000 KG
DIMENSIONS (L X W X H) APPROX.: 13300 X 11110 X 2250 MM
DESCRIPTION: HOLZMA ANGLE PANEL SAW
SERIAL NUMBER 0-241-07-0047
MAXIMUM CUTTING LENGTH OF THE MAIN MACHINE 3200 MM
MAXIMUM CUTTING WIDTH OF THE MAIN MACHINE 3800 MM
MAXIMUM CUTTING HEIGHT OF THE MAIN MACHINE 110 MM
WITH LOADING TABLE
MEASURE OF THE TABLE 5000 X 2800 MM
MAXIMUM LOADING CAPACITY 3500 KG
REAR AND SIDE LOADING OF THE PANELS
NUMBER OF GRIPPERS OF THE MAIN PUSHER GROUP: 4
CUTTING DEVICE FOR THIN PANELS
MOTOR POWER OF MAIN MACHINE 18 KW
DIAMETER OF THE SCORING SAW OF THE MAIN MACHINE 180 MM
DIAMETER OF THE MAIN SAW 450 MM
NUMBER OF GRIPPERS OF THE TRANSVERSAL PUSHER GROUP: 12
SIDE ALIGNER
IT HAS 3 FLOATING FRONT TABLES OF 650 X 2150 X 1000 MM
HYDRAULIC GUILLOTINE OF LEFTOVERS
OUTPUT CONVEYOR BELT OF 10.000 X 350 MM
SECURITY SYSTEM OMRAN SAFETYLIGHT CURTAIN CAD MATIC CONTROL

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 660 X 430 MM
DESCRIPTION: LOT OF NEW SAW BLADES
2 FREUD SAW BLADES OF ø 250 X 4.2 X 130 MM
5 CMT SAW BLADES OF ø 250 X 4,4 X 130 MM
7 SATURNE SAW BLADES OF ø 350 X 4.2 X 80 MM
1 FREUD SAW BLADE OF ø 300 X 4,4 X 130 MM
1 SATURNE SAW BLADE OF ø 400 X 4 X 30 MM
1 FREUD SAW BLADE OF ø 300 X 4,4 X 130 MM
1 PREZISS SAW BLADE OF ø 150 X 3 X 60 MM
1 CMT SAW BLADE ø 150 X 2 X 30 MM

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: WEIGHT APPROX.: 120 KG
DIMENSIONS (L X W X H) APPROX.: 1250 X 1000 X 650 MM
DESCRIPTION: LOT OF DIFFERENT USED SAW BLADES
DIFFERENT DIAMETERS AND DIFFERENT BRANDS
FOR MORE INFORMATION SEE PHOTOS

Ubicación: MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - BIMAK - MOD. 40 TF/C MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.

Ubicación: WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 200 X 200 X 100 MM
DESCRIPTION: LOT OF 4 DIAMOND TOOLS
FOR FURTHER INFORMATION SEE PHOTOS