19 ofertas

Año de construcción: usado
Ubicación: Land-wood chip heating nolting lcs rv 95/135

used, bj. 2010
135 kw
content v 880 l
control sutron bt 2
incl. automatic chip removal 

to the self-destruction
from site space ulm

technical data:

nolting furnaces lcs rv 95/135, which includes:
boiler lcs rv 95/135 according to din 4751
with integrated feed grate firing for the combustion of wood shavings, wood chips and other biomass of crushed.
three-pass tube boilers with a combustion train and two smoke tube trains.
steel boiler with inspection openings for the firebox and ash room
firebox lining made of heat-resistant refractory or fire concreting, pivoting revision and cleaning doors, generously dimensioned, insulated heating door with safety limit switches
combustion chamber with high-quality ceramic lining
firing socket with integrated feed grate firing.
the feed grate firing may well compensate for fuels with higher ash content and easy caking properties of the fuel.

ex duck drive for grate element movement, grate bars in high wear-resistant material quality with excellent thermal resistance properties.
the burned-out ashes falling from the rust in the channel of the ashes.

rated power: 135 kw
(depending on the fuel used and fuel moisture)

at increasing fuel humidity following benefits arising for the combustion plant:

% atroo % relative humidity performance 
20 15 135 kw
43 30 95 kw
82 45 85 kw

-maximum operating temperature/stb *: 90/100 â° c
* must be specified or 100/110 â° c
-max. operating pressure: 3.0 bar
-test pressure: 5,2 bar
-boiler weight: ca. 2135 kg

-dimensions:
-length: approx. 1925 mm (boiler without dust extractor)
-width: approx. 1020 mm (boiler)
-height: approx. 1760 mm (ok boiler)

accessories:
-set counter flanges on 65
-exhaust gas thermometer
-boiler thermometer
-schã¼r - and cleaning device

1 safety heat consumers
the safety heat exchanger is built directly into the boiler.
the flow pressure in the cold water pipe must be at least 2,0 bar.

a safety heat consumers is required according to din 4751.2 (closed systems). the required thermo valve, the thermal drain security must be on site (such as through the heating engineers).

1 rack unit
(insertion is performed from the back) consisting of:

-tray worm with gear motor auger with heat-resistant end
-dosing screw with gear motor and fuel template slot for better dosing of the quantity of fuel
-electrical back fire detectors
-thermostatic purge valve with water tank
-electrical fuel level monitoring in the shaft of the template
-additional thermostatic purge valve to the construction side connected directly to the water line
-rotary valves
gastight separation of fuel feeding steel rotor with 9 mm-thick fabric-reinforced rubber wings, powered by geared motor

1 dust collector lcs 133
multi cyclone dust collectors with single cyclones, cleaning, insulation and sheet metal panelling,

dust ton recording and dust bin, mounted suction draught fan with rotating body, balance wheel, motor with cooling disc, designed for thermal stress

1 electrical control and regulation system "lcr" with o2 control
in plc design with all necessary motor contactors and motor protection switches

data entry with clear, easy-to-use keypad, output on illuminated display

incl. device set:
-heated oxygen sensor
-vacuum switch
-temperature probe pt 100
-double thermostat
-waste gas thermostat

1 consumption-dependent power adjustment with vacuum control type "vala"

1 automatic ignition for combustion plant by hot air blower

1 exhaust gas recirculation included:
-partly insulated piping manifolds and flanges
-re circulation fan
-connector "piping"
-connecting piece "firing socket"
-electr. control "recirculation"

1 fire room temperature control to limit the temperature
in the hearth of the furnace base

scope of delivery:
-combustion chamber thermocouple
-control module

1 ash discharge screw "combustion chamber"
helical made of highly heat-resistant stainless steel
driven via worm gears ash support in separate ash container next to the boiler

1 ash "exchanger"
about wirbulatoren in the smoke pipes
the wirbulatoren promote the ashes forward into an ash collection box attached before the boiler.
from there, the ashes with an ash removal worm in a sideways next to the boiler tank is promoted.

1 exhaust pipe to the fireplace, d = 250 mm with arches and wall sleeve, approx. 2.5 m long without insulation

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

payment conditions: prices zuzã¼gl. used. vat, payment before picking up or shipping 

terms of delivery: from site

our general terms and conditions apply, see in the  WOOD CHIP HEATING NOLTING LCS RV 95/135 USED, BJ. 2010 135 KW CONTENT V 880 L CONTROL SUTRON BT 2 INCL. AUTOMATIC CHIP REMOVAL TO THE SELF-DESTRUCTION FROM SITE SPACE ULM TECHNICAL DATA: NOLTING FURNACES LCS RV 95/135, WHICH INCLUDES: BOILER LCS RV 95/135 ACCORDING TO DIN 4751 WITH INTEGRATED FEED GRATE FIRING FOR THE COMBUSTION OF WOOD SHAVINGS, WOOD CHIPS AND OTHER BIOMASS OF CRUSHED. THREE-PASS TUBE BOILERS WITH A COMBUSTION TRAIN AND TWO SMOKE TUBE TRAINS. STEEL BOILER WITH INSPECTION OPENINGS FOR THE FIREBOX AND ASH ROOM FIREBOX LINING MADE OF HEAT-RESISTANT REFRACTORY OR FIRE CONCRETING, PIVOTING REVISION AND CLEANING DOORS, GENEROUSLY DIMENSIONED, INSULATED HEATING DOOR WITH SAFETY LIMIT SWITCHES COMBUSTION CHAMBER WITH HIGH-QUALITY CERAMIC LINING FIRING SOCKET WITH INTEGRATED FEED GRATE FIRING. THE FEED GRATE FIRING MAY WELL COMPENSATE FOR FUELS WITH HIGHER ASH CONTENT AND EASY CAKING PROPERTIES OF THE FUEL. EX DUCK DRIVE FOR GRATE ELEMENT MOVEMENT, GRATE BARS IN HIGH WEAR-RESISTANT MATERIAL QUALITY WITH EXCELLENT THERMAL RESISTANCE PROPERTIES. THE BURNED-OUT ASHES FALLING FROM THE RUST IN THE CHANNEL OF THE ASHES. RATED POWER: 135 KW (DEPENDING ON THE FUEL USED AND FUEL MOISTURE) AT INCREASING FUEL HUMIDITY FOLLOWING BENEFITS ARISING FOR THE COMBUSTION PLANT: % ATROO % RELATIVE HUMIDITY PERFORMANCE 20 15 135 KW 43 30 95 KW 82 45 85 KW -MAXIMUM OPERATING TEMPERATURE/STB *: 90/100 ° C * MUST BE SPECIFIED OR 100/110 ° C -MAX. OPERATING PRESSURE: 3.0 BAR -TEST PRESSURE: 5,2 BAR -BOILER WEIGHT: CA. 2135 KG -DIMENSIONS: -LENGTH: APPROX. 1925 MM (BOILER WITHOUT DUST EXTRACTOR) -WIDTH: APPROX. 1020 MM (BOILER) -HEIGHT: APPROX. 1760 MM (OK BOILER) ACCESSORIES: -SET COUNTER FLANGES ON 65 -EXHAUST GAS THERMOMETER -BOILER THERMOMETER -SCHüR - AND CLEANING DEVICE 1 SAFETY HEAT CONSUMERS THE SAFETY HEAT EXCHANGER IS BUILT DIRECTLY INTO THE BOILER. THE FLOW PRESSURE IN THE COLD WATER PIPE MUST BE AT LEAST 2,0 BAR. A SAFETY HEAT CONSUMERS IS REQUIRED ACCORDING TO DIN 4751.2 (CLOSED SYSTEMS). THE REQUIRED THERMO VALVE, THE THERMAL DRAIN SECURITY MUST BE ON SITE (SUCH AS THROUGH THE HEATING ENGINEERS). 1 RACK UNIT (INSERTION IS PERFORMED FROM THE BACK) CONSISTING OF: -TRAY WORM WITH GEAR MOTOR AUGER WITH HEAT-RESISTANT END -DOSING SCREW WITH GEAR MOTOR AND FUEL TEMPLATE SLOT FOR BETTER DOSING OF THE QUANTITY OF FUEL -ELECTRICAL BACK FIRE DETECTORS -THERMOSTATIC PURGE VALVE WITH WATER TANK -ELECTRICAL FUEL LEVEL MONITORING IN THE SHAFT OF THE TEMPLATE -ADDITIONAL THERMOSTATIC PURGE VALVE TO THE CONSTRUCTION SIDE CONNECTED DIRECTLY TO THE WATER LINE -ROTARY VALVES GASTIGHT SEPARATION OF FUEL FEEDING STEEL ROTOR WITH 9 MM-THICK FABRIC-REINFORCED RUBBER WINGS, POWERED BY GEARED MOTOR 1 DUST COLLECTOR LCS 133 MULTI CYCLONE DUST COLLECTORS WITH SINGLE CYCLONES, CLEANING, INSULATION AND SHEET METAL PANELLING, DUST TON RECORDING AND DUST BIN, MOUNTED SUCTION DRAUGHT FAN WITH ROTATING BODY, BALANCE WHEEL, MOTOR WITH COOLING DISC, DESIGNED FOR THERMAL STRESS 1 ELECTRICAL CONTROL AND REGULATION SYSTEM "LCR" WITH O2 CONTROL IN PLC DESIGN WITH ALL NECESSARY MOTOR CONTACTORS AND MOTOR PROTECTION SWITCHES DATA ENTRY WITH CLEAR, EASY-TO-USE KEYPAD, OUTPUT ON ILLUMINATED DISPLAY INCL. DEVICE SET: -HEATED OXYGEN SENSOR -VACUUM SWITCH -TEMPERATURE PROBE PT 100 -DOUBLE THERMOSTAT -WASTE GAS THERMOSTAT 1 CONSUMPTION-DEPENDENT POWER ADJUSTMENT WITH VACUUM CONTROL TYPE "VALA" 1 AUTOMATIC IGNITION FOR COMBUSTION PLANT BY HOT AIR BLOWER 1 EXHAUST GAS RECIRCULATION INCLUDED: -PARTLY INSULATED PIPING MANIFOLDS AND FLANGES -RE CIRCULATION FAN -CONNECTOR "PIPING" -CONNECTING PIECE "FIRING SOCKET" -ELECTR. CONTROL "RECIRCULATION" 1 FIRE ROOM TEMPERATURE CONTROL TO LIMIT THE TEMPERATURE IN THE HEARTH OF THE FURNACE BASE SCOPE OF DELIVERY: -COMBUSTION CHAMBER THERMOCOUPLE -CONTROL MODULE 1 ASH DISCHARGE SCREW "COMBUSTION CHAMBER" HELICAL MADE OF HIGHLY HEAT-RESISTANT STAINLESS STEEL DRIVEN VIA WORM GEARS ASH SUPPORT IN SEPARATE ASH CONTAINER NEXT TO THE BOILER 1 ASH "EXCHANGER" ABOUT WIRBULATOREN IN THE SMOKE PIPES THE WIRBULATOREN PROMOTE THE ASHES FORWARD INTO AN ASH COLLECTION BOX ATTACHED BEFORE THE BOILER. FROM THERE, THE ASHES WITH AN ASH REMOVAL WORM IN A SIDEWAYS NEXT TO THE BOILER TANK IS PROMOTED. 1 EXHAUST PIPE TO THE FIREPLACE, D = 250 MM WITH ARCHES AND WALL SLEEVE, APPROX. 2.5 M LONG WITHOUT INSULATION HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE PAYMENT CONDITIONS: PRICES ZUZüGL. USED. VAT, PAYMENT BEFORE PICKING UP OR SHIPPING TERMS OF DELIVERY: FROM SITE OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>distance between columns:1180 mm<br/>stroke:5 - 120 mm<br/>distance table/ram, max. stroke up, adjustment up:490 mm<br/>no. of strokes:80 /min<br/>table surface area:1100 x 700 mm<br/>table height over floor:1040 mm<br/>side window:400 mm<br/>ram surface:900 x 500 mm<br/>ram adjustment:100 mm<br/>oil volume:1200 l<br/>material width of feeder:400 mm<br/>material thickness of feeder: - 4,0 mm<br/>feed length:0,1 - 6500 mm<br/>material width waste cutter:400 mm<br/>material thickness waste cutter: - 4,0 mm<br/>material cross-cut:1200 mm²<br/>power requirement:45,0 kw<br/>weight:12,0 t<br/>dimensions (wxdxh):2,5 x 1,9 x 3,7 m<br/>list price: in running function in our warehouse: <br/>german safety: permitted for manual loading:uvv 11.064 - vbg 7n5.2 <br/>knuckle-joint press:hydraulisch angetrieben <br/>conrollable dependant on pressure and way: <br/>stroke adjustment:automatisch <br/>ram adjustment:motorisch <br/>ram counterbalance:pneumatisch <br/>roll feed:alba, gvhy 400, yom 1993 <br/>scrap cutter:hms, azh-04/20 <br/>t-slots in table and ram acc. to specification:auf anfrage <br/><br/> PRESSURE:160 T
DISTANCE BETWEEN COLUMNS:1180 MM
STROKE:5 - 120 MM
DISTANCE TABLE/RAM, MAX. STROKE UP, ADJUSTMENT UP:490 MM
NO. OF STROKES:80 /MIN
TABLE SURFACE AREA:1100 X 700 MM
TABLE HEIGHT OVER FLOOR:1040 MM
SIDE WINDOW:400 MM
RAM SURFACE:900 X 500 MM
RAM ADJUSTMENT:100 MM
OIL VOLUME:1200 L
MATERIAL WIDTH OF FEEDER:400 MM
MATERIAL THICKNESS OF FEEDER: - 4,0 MM
FEED LENGTH:0,1 - 6500 MM
MATERIAL WIDTH WASTE CUTTER:400 MM
MATERIAL THICKNESS WASTE CUTTER: - 4,0 MM
MATERIAL CROSS-CUT:1200 MM²
POWER REQUIREMENT:45,0 KW
WEIGHT:12,0 T
DIMENSIONS (WXDXH):2,5 X 1,9 X 3,7 M
LIST PRICE: IN RUNNING FUNCTION IN OUR WAREHOUSE:
GERMAN SAFETY: PERMITTED FOR MANUAL LOADING:UVV 11.064 - VBG 7N5.2
KNUCKLE-JOINT PRESS:HYDRAULISCH ANGETRIEBEN
CONROLLABLE DEPENDANT ON PRESSURE AND WAY:
STROKE ADJUSTMENT:AUTOMATISCH
RAM ADJUSTMENT:MOTORISCH
RAM COUNTERBALANCE:PNEUMATISCH
ROLL FEED:ALBA, GVHY 400, YOM 1993
SCRAP CUTTER:HMS, AZH-04/20
T-SLOTS IN TABLE AND RAM ACC. TO SPECIFICATION:AUF ANFRAGE

Vendedor: Vögtle Service GmbH
Año de construcción: usado
Ubicación: Land-dewatering station with membrane filter press for kieselguhr sludge
 
this complete dewatering station was designed by limburg for kieselguhr waste dewatering in to semidry cakes for easy waste disposal. the process is suitable also for dewatering other type of sludges. actual dewatering is made with latham side bar membrane filter press which reaches over 50 % dry (by weight) content of waste cake, inlet sludge being between 10 and 20 % dry content filter press is equipped with an automatic cloth washing system and an automatic cake discharge. shaker bars for discharge and plate opening and closing functions are hydraulically operated (limburg cake release control system). cloth washing is made in cycles and during the wash cycle, wash arm will individually wash one chamber at a time. process includes a sludge tank with agitation, sludge and water pumps, filtrate water tank with pump, filter press with auxiliaries, supporting structures and control cabinet with siemens simatic s 7-400 plc and siemens op 7 display. equipment was delivered in year 2000 and it is still installed and in good operational condition.
 
technical data:
made by: limburg – latham
made in year: 2000
inlet sludge dry content: 10 – 20%
capacity: max 3600 kg dry product / 24 hours
cake dry content: > 50% by weight
filtrate dry solid content: < 2 % by weight
latham filter press: side bar membrane 630
total filter area: 6.9 m2
total chamber volume: 99.8 dm3
plate size: 630 mm
working pressure: 7 barg
number of chambers: 12 (expandable to 15)
plate transport: automatic, multiple cake discharge
membrane filtration pump: 159 litres / min
sludge tank: 6 m3, aisi 316l
sludge tank agitator: 0.75 kw, 80 rpm, blade 660 mm
sludge pump capacity: 511 litres / min
filtrate tank: 1.5 m3, aisi 316l   DEWATERING STATION WITH MEMBRANE FILTER PRESS FOR KIESELGUHR SLUDGE THIS COMPLETE DEWATERING STATION WAS DESIGNED BY LIMBURG FOR KIESELGUHR WASTE DEWATERING IN TO SEMIDRY CAKES FOR EASY WASTE DISPOSAL. THE PROCESS IS SUITABLE ALSO FOR DEWATERING OTHER TYPE OF SLUDGES. ACTUAL DEWATERING IS MADE WITH LATHAM SIDE BAR MEMBRANE FILTER PRESS WHICH REACHES OVER 50 % DRY (BY WEIGHT) CONTENT OF WASTE CAKE, INLET SLUDGE BEING BETWEEN 10 AND 20 % DRY CONTENT FILTER PRESS IS EQUIPPED WITH AN AUTOMATIC CLOTH WASHING SYSTEM AND AN AUTOMATIC CAKE DISCHARGE. SHAKER BARS FOR DISCHARGE AND PLATE OPENING AND CLOSING FUNCTIONS ARE HYDRAULICALLY OPERATED (LIMBURG CAKE RELEASE CONTROL SYSTEM). CLOTH WASHING IS MADE IN CYCLES AND DURING THE WASH CYCLE, WASH ARM WILL INDIVIDUALLY WASH ONE CHAMBER AT A TIME. PROCESS INCLUDES A SLUDGE TANK WITH AGITATION, SLUDGE AND WATER PUMPS, FILTRATE WATER TANK WITH PUMP, FILTER PRESS WITH AUXILIARIES, SUPPORTING STRUCTURES AND CONTROL CABINET WITH SIEMENS SIMATIC S 7-400 PLC AND SIEMENS OP 7 DISPLAY. EQUIPMENT WAS DELIVERED IN YEAR 2000 AND IT IS STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. TECHNICAL DATA: MADE BY: LIMBURG – LATHAM MADE IN YEAR: 2000 INLET SLUDGE DRY CONTENT: 10 – 20% CAPACITY: MAX 3600 KG DRY PRODUCT / 24 HOURS CAKE DRY CONTENT: > 50% BY WEIGHT FILTRATE DRY SOLID CONTENT: < 2 % BY WEIGHT LATHAM FILTER PRESS: SIDE BAR MEMBRANE 630 TOTAL FILTER AREA: 6.9 M2 TOTAL CHAMBER VOLUME: 99.8 DM3 PLATE SIZE: 630 MM WORKING PRESSURE: 7 BARG NUMBER OF CHAMBERS: 12 (EXPANDABLE TO 15) PLATE TRANSPORT: AUTOMATIC, MULTIPLE CAKE DISCHARGE MEMBRANE FILTRATION PUMP: 159 LITRES / MIN SLUDGE TANK: 6 M3, AISI 316L SLUDGE TANK AGITATOR: 0.75 KW, 80 RPM, BLADE 660 MM SLUDGE PUMP CAPACITY: 511 LITRES / MIN FILTRATE TANK: 1.5 M3, AISI 316L
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-automatic guillotine type  monguzzi tra 3050
second hand machine
mechanic cutting system
max. working length mm. 3050
max. height of pressure mm. 65
electric movement of the rear adjuster
motor power hp 7,5
weight kgs. 3000
volt. 380/50 AUTOMATIC GUILLOTINE TYPE MONGUZZI TRA 3050 SECOND HAND MACHINE MECHANIC CUTTING SYSTEM MAX. WORKING LENGTH MM. 3050 MAX. HEIGHT OF PRESSURE MM. 65 ELECTRIC MOVEMENT OF THE REAR ADJUSTER MOTOR POWER HP 7,5 WEIGHT KGS. 3000 VOLT. 380/50
Vendedor: IMALL
Año de construcción: usado
Precio: 1.200 €
Ubicación: Land-description
brand	ekobal
model	ekosack 50
id	0083
status	active
price	1.200 € + vat
year of manufacture	2007
location	oradea (ro)

hydraulic baling press ekobal ekopack 50 manufactured in 2007 for waste products. technical specifications: total dimensions (l x l x h): 855 x 680 x 1950 mm. bale dimensions (l x l x h): 600 x 400 x (300-700) mm. maximum bale weight: 40-70 kg. maximum pressure 5 tons ± 5%. surface pressure: 208 kpa. room dimensions (l x w x h): 600 x 400 x 900 mm. pressure compressor capacity: 0.216 m3, type of pressing chamber: interchangeable, stow-away, number of binding slots 2. pressing time: 25 s. power: 1.5 kw, voltage: 3 x 400 v / 50 hz, electrical protection: ip 54, hydraulically driven, machine weight: 310 kg.

exworks. price is negotiable. 


technical inspection can be organized at least 24 hrs before the due date

we speak english. wir sprechen deutsch. 
hablamos español. beszélünk magyarul.

irrtum, anderungen und zwischenverkauf vorbehalten /
subject to errors, changes and prior sale /
ne rezervam dreptul la greseli, modificari si vanzare prealabila.   DESCRIPTION BRAND EKOBAL MODEL EKOSACK 50 ID 0083 STATUS ACTIVE PRICE 1.200 € + VAT YEAR OF MANUFACTURE 2007 LOCATION ORADEA (RO) HYDRAULIC BALING PRESS EKOBAL EKOPACK 50 MANUFACTURED IN 2007 FOR WASTE PRODUCTS. TECHNICAL SPECIFICATIONS: TOTAL DIMENSIONS (L X L X H): 855 X 680 X 1950 MM. BALE DIMENSIONS (L X L X H): 600 X 400 X (300-700) MM. MAXIMUM BALE WEIGHT: 40-70 KG. MAXIMUM PRESSURE 5 TONS ± 5%. SURFACE PRESSURE: 208 KPA. ROOM DIMENSIONS (L X W X H): 600 X 400 X 900 MM. PRESSURE COMPRESSOR CAPACITY: 0.216 M3, TYPE OF PRESSING CHAMBER: INTERCHANGEABLE, STOW-AWAY, NUMBER OF BINDING SLOTS 2. PRESSING TIME: 25 S. POWER: 1.5 KW, VOLTAGE: 3 X 400 V / 50 HZ, ELECTRICAL PROTECTION: IP 54, HYDRAULICALLY DRIVEN, MACHINE WEIGHT: 310 KG. EXWORKS. PRICE IS NEGOTIABLE. TECHNICAL INSPECTION CAN BE ORGANIZED AT LEAST 24 HRS BEFORE THE DUE DATE WE SPEAK ENGLISH. WIR SPRECHEN DEUTSCH. HABLAMOS ESPAñOL. BESZéLüNK MAGYARUL. IRRTUM, ANDERUNGEN UND ZWISCHENVERKAUF VORBEHALTEN / SUBJECT TO ERRORS, CHANGES AND PRIOR SALE / NE REZERVAM DREPTUL LA GRESELI, MODIFICARI SI VANZARE PREALABILA.
Vendedor: Machine Saver Romania
Año de construcción: usado
Ubicación: Land-ca 1962
rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one operation individually, and with zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic waste ejection device, line 5301, max: 1300x1200mm, min: 250 mm, 3600/hours
 CA 1962 ROTATION SLOT - AND DIE-CUTTING MACHINE, STRENGTH OF CARDBOARD: 0,5-4 MM, THICKNESS OF THE CORRUGATED BOARD: 3-7 MM, CAPACITY (SPEED): UNTIL 3600 SINGLE CUTS PER HOUR, SLOTS AND BOOKLET EDGE AT SIDE PERFORMED IN A SINGLE PASS, SOIL OR COVER CAN IN ONE OPERATION INDIVIDUALLY, AND WITH ZENTRALO CUT TWICE, PRODUCED, ADDITIONAL DELIVERY ONE CUTTING AND CREASING DEVICE CAN CORRUGATED CARDBOARD IN A SINGLE PUNCHED, SLOTTED, AND GROOVED IN ONE DIRECTION AND CROPPED, AUTOMATIC WASTE EJECTION DEVICE, LINE 5301, MAX: 1300X1200MM, MIN: 250 MM, 3600/HOURS
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Ubicación: Land-semiautomatic pile turner baumann bsw 3-1000  <br/>  age 2001<br/>  machine number 800.43<br/>  <br/>  platform dimension inside 850 x 1370 mm<br/>  max. opening 1345 mm<br/>  min. opening 620 mm<br/>  max. pile weight 1000 kg<br/>   <br/>  machine comes with adjustable powerful air<br/>  <br/>  features: <br/>  -pile turning<br/>  -process of drying will be faster<br/>  -air will separate the printed sheets better<br/>  -change the pallet<br/>  -printers waste will be removed<br/>  <br/>  the price is 11000 euro without vat, lot<br/>  checked and cleaned condition<br/>  (required space approx. 2250 x 2250mm); good SEMIAUTOMATIC PILE TURNER BAUMANN BSW 3-1000
AGE 2001
MACHINE NUMBER 800.43

PLATFORM DIMENSION INSIDE 850 X 1370 MM
MAX. OPENING 1345 MM
MIN. OPENING 620 MM
MAX. PILE WEIGHT 1000 KG

MACHINE COMES WITH ADJUSTABLE POWERFUL AIR

FEATURES:
-PILE TURNING
-PROCESS OF DRYING WILL BE FASTER
-AIR WILL SEPARATE THE PRINTED SHEETS BETTER
-CHANGE THE PALLET
-PRINTERS WASTE WILL BE REMOVED

THE PRICE IS 11000 EURO WITHOUT VAT, LOT
CHECKED AND CLEANED CONDITION
(REQUIRED SPACE APPROX. 2250 X 2250MM); GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land- they offer here on einegebrauchte maxrac eceinfahr shelf system from lagerumbau.topp, neuwertigex warehouse 21698 harsefeld1. 512 plots / 2 high bodenlage7 pallets in the x 3 pallets 21 pallets x = 72 kanã¤lemehr or reduced quantities possible. mounting optional total: 4,500 plã¤tzevergleichen our offer please! this offer includes: material for: 1,512 stellplã¤tzegesamt: 72 channels of ã  21 paletten219 frame approximately 7,200 x 1,350 mm288 blades 6,000 mm144 bodenschienen438 traverses approximately 1400 mm438 ground anchor belastungsschilderflã¤chenbedarf 108 m x.  6 mis permissible channel load is 11,200 kg (when uniformly distribuited load) 800 kg per pallet 7 pallets at a time. connectors - easy assembly! frames are assembled. preassembled. shelves in other versions if you need, please contact us. we offer a comprehensive range of new and used racks and accessories and you assist in your planung.bitte note also our other auctions from the warehouse area in our shop. other accessories such as: starting corners, piling wall, pallet stops, chipboard, grates, depth bars u.v.m. available. shipping: cheaper shipping with several low-cost carriers can. please request, freight charges, stating your postal code and location, as well as the desired quantity. services: extensions, conversions, instandsetzungregalprã¼fung according to bgr 234 / din en 15635ankauf, recycling, waste disposal  THEY OFFER HERE ON EINEGEBRAUCHTE MAXRAC ECEINFAHR SHELF SYSTEM FROM LAGERUMBAU.TOPP, NEUWERTIGEX WAREHOUSE 21698 HARSEFELD1. 512 PLOTS / 2 HIGH BODENLAGE7 PALLETS IN THE X 3 PALLETS 21 PALLETS X = 72 KAN&ATILDE;&CURREN;LEMEHR OR REDUCED QUANTITIES POSSIBLE. MOUNTING OPTIONAL TOTAL: 4,500 PL&ATILDE;&CURREN;TZEVERGLEICHEN OUR OFFER PLEASE! THIS OFFER INCLUDES: MATERIAL FOR: 1,512 STELLPL&ATILDE;&CURREN;TZEGESAMT: 72 CHANNELS OF &ATILDE;&NBSP; 21 PALETTEN219 FRAME APPROXIMATELY 7,200 X 1,350 MM288 BLADES 6,000 MM144 BODENSCHIENEN438 TRAVERSES APPROXIMATELY 1400 MM438 GROUND ANCHOR BELASTUNGSSCHILDERFL&ATILDE;&CURREN;CHENBEDARF 108 M X. 6 MIS PERMISSIBLE CHANNEL LOAD IS 11,200 KG (WHEN UNIFORMLY DISTRIBUITED LOAD) 800 KG PER PALLET 7 PALLETS AT A TIME. CONNECTORS - EASY ASSEMBLY! FRAMES ARE ASSEMBLED. PREASSEMBLED. SHELVES IN OTHER VERSIONS IF YOU NEED, PLEASE CONTACT US. WE OFFER A COMPREHENSIVE RANGE OF NEW AND USED RACKS AND ACCESSORIES AND YOU ASSIST IN YOUR PLANUNG.BITTE NOTE ALSO OUR OTHER AUCTIONS FROM THE WAREHOUSE AREA IN OUR SHOP. OTHER ACCESSORIES SUCH AS: STARTING CORNERS, PILING WALL, PALLET STOPS, CHIPBOARD, GRATES, DEPTH BARS U.V.M. AVAILABLE. SHIPPING: CHEAPER SHIPPING WITH SEVERAL LOW-COST CARRIERS CAN. PLEASE REQUEST, FREIGHT CHARGES, STATING YOUR POSTAL CODE AND LOCATION, AS WELL AS THE DESIRED QUANTITY. SERVICES: EXTENSIONS, CONVERSIONS, INSTANDSETZUNGREGALPR&ATILDE;&FRAC14;FUNG ACCORDING TO BGR 234 / DIN EN 15635ANKAUF, RECYCLING, WASTE DISPOSAL
Vendedor: eth Ericus Transport u. Handelsges.mbH
Año de construcción: usado
Ubicación: Land-manufacturer paal
type pacomat 2
year of construction-1979
press press 27 to power main
feed channel 1000 x 650 mm (l x w)
theological the domestic troughput 200 cbm / h
bale size 700 x 1,000 mm (w x h) length adjustable
driving motor 20 kw
tying system 4-fold horizontal, fully automated
bale weight approx. 400 kg
transport dimensions only baler aprox. 7,600 x 1.720 x 2,500 mm (l x w x h)
machine weight baler 5 to
comments the baler which overhauled and tested. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.

producent paal
type pacomat 2
rok produkcji 1979
siå?a nacisku 27 t
wymiary wlotowego kanaå?u 1,000 x 650 mm (l x p)
teoretyczna wydajnoå?ä? 200 cbm / h
wymiary dieudonnã© 700 x 1,000 mm (s x h), då?ugoå?ä? zmienna
moc przyå?ä?czeniowa 20 kw
wiä?zanie 4-krotne horyzontalne, w peå?ni automatyczne
masa bala do ok. 400 kg
masa transportowa bez stempla 7,600 x 1.720 x 2,500 mm (l x s x h)
waga prasy ok. 5 t
uwagi prasa zostaå?a wyremontowana i poddana prã³bom. moå¼liwe obejrzenie maszyny na miejscu uprzednim umã³wieniu po.
 MANUFACTURER PAAL TYPE PACOMAT 2 YEAR OF CONSTRUCTION-1979 PRESS PRESS 27 TO POWER MAIN FEED CHANNEL 1000 X 650 MM (L X W) THEOLOGICAL THE DOMESTIC TROUGHPUT 200 CBM / H BALE SIZE 700 X 1,000 MM (W X H) LENGTH ADJUSTABLE DRIVING MOTOR 20 KW TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATED BALE WEIGHT APPROX. 400 KG TRANSPORT DIMENSIONS ONLY BALER APROX. 7,600 X 1.720 X 2,500 MM (L X W X H) MACHINE WEIGHT BALER 5 TO COMMENTS THE BALER WHICH OVERHAULED AND TESTED. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS. PRODUCENT PAAL TYPE PACOMAT 2 ROK PRODUKCJI 1979 SI&ARING;?A NACISKU 27 T WYMIARY WLOTOWEGO KANA&ARING;?U 1,000 X 650 MM (L X P) TEORETYCZNA WYDAJNO&ARING;?&AUML;? 200 CBM / H WYMIARY DIEUDONN&ATILDE;© 700 X 1,000 MM (S X H), D&ARING;?UGO&ARING;?&AUML;? ZMIENNA MOC PRZY&ARING;?&AUML;?CZENIOWA 20 KW WI&AUML;?ZANIE 4-KROTNE HORYZONTALNE, W PE&ARING;?NI AUTOMATYCZNE MASA BALA DO OK. 400 KG MASA TRANSPORTOWA BEZ STEMPLA 7,600 X 1.720 X 2,500 MM (L X S X H) WAGA PRASY OK. 5 T UWAGI PRASA ZOSTA&ARING;?A WYREMONTOWANA I PODDANA PR&ATILDE;&SUP3;BOM. MO&ARING;&FRAC14;LIWE OBEJRZENIE MASZYNY NA MIEJSCU UPRZEDNIM UM&ATILDE;&SUP3;WIENIU PO.
Vendedor: TCS Technical Consulting Szczecin Sp. z o.o.
Año de construcción: usado
Ubicación: Land-manufacturer paal
type pacomat 2s
year of construction 1998
press power main press 35 t
specific press capacity 5 kg / cmâ²
feed channel 1000 x 650 mm (l x w)
theo retic throughput rate 200 cbm / h
bale size 700 x 1,000 mm (w x h) length adjustable
driving motor 35 kw
tying system 4-fold horizontal, fully automated
bale weight approx. 450 kg
total dimensions 6,500 x 3,200 x 2,900 mm (l x w x h)
transport dimensions 6,500 x 1,600 x 2,900 mm (l x w x h)
machine weight baler approx. 8 to
	
comments: the baler has been overhauled and tested and is immediately ready for operation. inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors.

producent paal
type pacomat 2s
rok produkcji 1998
siå?a nacisku 35 t
siå?a nacisku jednostkowa 5.0 kg / cmâ²
wymiary wlotowego kanaå?u 1,000 x 650 mm (l x p)
teoretyczna wydajnoå?ä? 200 cbm / h
wymiary dieudonnã© 700 x 1,000 mm (s x h), då?ugoå?ä? zmienna
moc przyå?ä?czeniowa 35 kw
wiä?zanie 4-krotne horyzontalne, w peå?ni automatyczne
masa bala approx. 450 kg
wymiary maszyny 6,500 x 3,200 x 2,900 mm (l x s x h)
wymiary transportowe 6,500 x 1,600 x 2,900 mm (l x s x h)
waga prasy approx. 8 t
	
uwagi: prasa zostaå?a wyremontowana i poddana prã³bom. moå¼liwe obejrzenie maszyny na miejscu uprzednim umã³wieniu po.
 MANUFACTURER PAAL TYPE PACOMAT 2S YEAR OF CONSTRUCTION 1998 PRESS POWER MAIN PRESS 35 T SPECIFIC PRESS CAPACITY 5 KG / CM&ACIRC;&SUP2; FEED CHANNEL 1000 X 650 MM (L X W) THEO RETIC THROUGHPUT RATE 200 CBM / H BALE SIZE 700 X 1,000 MM (W X H) LENGTH ADJUSTABLE DRIVING MOTOR 35 KW TYING SYSTEM 4-FOLD HORIZONTAL, FULLY AUTOMATED BALE WEIGHT APPROX. 450 KG TOTAL DIMENSIONS 6,500 X 3,200 X 2,900 MM (L X W X H) TRANSPORT DIMENSIONS 6,500 X 1,600 X 2,900 MM (L X W X H) MACHINE WEIGHT BALER APPROX. 8 TO COMMENTS: THE BALER HAS BEEN OVERHAULED AND TESTED AND IS IMMEDIATELY READY FOR OPERATION. INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS. PRODUCENT PAAL TYPE PACOMAT 2S ROK PRODUKCJI 1998 SI&ARING;?A NACISKU 35 T SI&ARING;?A NACISKU JEDNOSTKOWA 5.0 KG / CM&ACIRC;&SUP2; WYMIARY WLOTOWEGO KANA&ARING;?U 1,000 X 650 MM (L X P) TEORETYCZNA WYDAJNO&ARING;?&AUML;? 200 CBM / H WYMIARY DIEUDONN&ATILDE;© 700 X 1,000 MM (S X H), D&ARING;?UGO&ARING;?&AUML;? ZMIENNA MOC PRZY&ARING;?&AUML;?CZENIOWA 35 KW WI&AUML;?ZANIE 4-KROTNE HORYZONTALNE, W PE&ARING;?NI AUTOMATYCZNE MASA BALA APPROX. 450 KG WYMIARY MASZYNY 6,500 X 3,200 X 2,900 MM (L X S X H) WYMIARY TRANSPORTOWE 6,500 X 1,600 X 2,900 MM (L X S X H) WAGA PRASY APPROX. 8 T UWAGI: PRASA ZOSTA&ARING;?A WYREMONTOWANA I PODDANA PR&ATILDE;&SUP3;BOM. MO&ARING;&FRAC14;LIWE OBEJRZENIE MASZYNY NA MIEJSCU UPRZEDNIM UM&ATILDE;&SUP3;WIENIU PO.
Vendedor: TCS Technical Consulting Szczecin Sp. z o.o.
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-euro press 5000 v5, obsolete force, 50 tons, built in 1996,.
slot slot 1,250 x 1,160 mm, power 37 kw, with
hook lift holder for mobile use

technical data

type europress 5000 v5
built in 1996
pressing force 50 t
power: 37 kw (1.motor 15 kw / 2 motor 22 kw)
nominal current of 60 a.
theoretical hourly capacity: 180-220 cbm under operating conditions
filler: 1250 x 1160 mm (l x w)
filling volume: maximum 1,4 m3
bale size: 730 x 1040 mm (h x w) length variable
bale weight: 450-550 kg, depend on material
setting: 5 x vertical
machine dimensions: approx. 6800 x 2005 x 3050 mm (l x w x h)
weight: approx. 9,500 t
this machine is to a channel baling presses with automatic
control setting, i.e. as soon as the material is entered, turns on the machine in automatic operation position independently, presses the discontinued material and automatically binds off after reaching a bale length. EURO PRESS 5000 V5, OBSOLETE FORCE, 50 TONS, BUILT IN 1996,. SLOT SLOT 1,250 X 1,160 MM, POWER 37 KW, WITH HOOK LIFT HOLDER FOR MOBILE USE TECHNICAL DATA TYPE EUROPRESS 5000 V5 BUILT IN 1996 PRESSING FORCE 50 T POWER: 37 KW (1.MOTOR 15 KW / 2 MOTOR 22 KW) NOMINAL CURRENT OF 60 A. THEORETICAL HOURLY CAPACITY: 180-220 CBM UNDER OPERATING CONDITIONS FILLER: 1250 X 1160 MM (L X W) FILLING VOLUME: MAXIMUM 1,4 M3 BALE SIZE: 730 X 1040 MM (H X W) LENGTH VARIABLE BALE WEIGHT: 450-550 KG, DEPEND ON MATERIAL SETTING: 5 X VERTICAL MACHINE DIMENSIONS: APPROX. 6800 X 2005 X 3050 MM (L X W X H) WEIGHT: APPROX. 9,500 T THIS MACHINE IS TO A CHANNEL BALING PRESSES WITH AUTOMATIC CONTROL SETTING, I.E. AS SOON AS THE MATERIAL IS ENTERED, TURNS ON THE MACHINE IN AUTOMATIC OPERATION POSITION INDEPENDENTLY, PRESSES THE DISCONTINUED MATERIAL AND AUTOMATICALLY BINDS OFF AFTER REACHING A BALE LENGTH.
Vendedor: Smellwell GmbH
Año de construcción: usado
Ubicación: Land-polar 115 autotrim polar 137 autotrim or <br>for guillotines with automatic waste removal device (ase) like perfecta 132 ts ase . the waste is discharged onto the initial cross conveyor (hf) installed under the guillotine. from here the waste is conveyed up (sf) into a bin.<br><br>the sf can be installed in three directions: straight away from the hf or right-angled to the left or righthand side.<br><br>waste conveyor sf inline (one element) with a narrower transport width is offered alternatively ? installed at the left or right straight away from the guillotine.<br>; good POLAR 115 AUTOTRIM POLAR 137 AUTOTRIM OR
FOR GUILLOTINES WITH AUTOMATIC WASTE REMOVAL DEVICE (ASE) LIKE PERFECTA 132 TS ASE . THE WASTE IS DISCHARGED ONTO THE INITIAL CROSS CONVEYOR (HF) INSTALLED UNDER THE GUILLOTINE. FROM HERE THE WASTE IS CONVEYED UP (SF) INTO A BIN.

THE SF CAN BE INSTALLED IN THREE DIRECTIONS: STRAIGHT AWAY FROM THE HF OR RIGHT-ANGLED TO THE LEFT OR RIGHTHAND SIDE.

WASTE CONVEYOR SF INLINE (ONE ELEMENT) WITH A NARROWER TRANSPORT WIDTH IS OFFERED ALTERNATIVELY ? INSTALLED AT THE LEFT OR RIGHT STRAIGHT AWAY FROM THE GUILLOTINE.
; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Precio: 13.300 €
Ubicación: Land-the matec hms-350 kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc.

all types of green waste such as bouquets, garden waste, potted plants, compost in each state, agricultural waste, earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. the hammer mill is equipped with impact tools made of hardox, the appropriate anvil blow bar and the following THE MATEC HMS-350 KLEINSHREDDER FOR PROFESSIONALS, WITH HAMMER MILL IS SUITABLE FOR CRUSHING OF GREEN WASTE, ETC. ALL TYPES OF GREEN WASTE SUCH AS BOUQUETS, GARDEN WASTE, POTTED PLANTS, COMPOST IN EACH STATE, AGRICULTURAL WASTE, EARTH, CEMETERY WASTE, LARGE WOOD CHIPS AND SMALL WOOD WASTE, ETC. CAN THUS BE CRUSHED. THE HAMMER MILL IS EQUIPPED WITH IMPACT TOOLS MADE OF HARDOX, THE APPROPRIATE ANVIL BLOW BAR AND THE FOLLOWING "DATA" ALSO MADE OF HARDOX. THE CONTENT OF FLOWER POTS, FLOWER BOXES, "BAKED TOGETHER" GRASS CUTTING, ETC. CAN THUS BE CRUSHED. THE COMBINATION OF ANVIL BLOW BAR BEFORE CALIBRATION AND SUBSEQUENT ANVIL CALCULATION FOR FINE CRUSHING RESULTS A HIGH THROUGHPUT CAPACITY WITH A SMALL EXPENDITURE OF ENERGY. ELECTRIC MOTOR 7.5 KW, A DIESEL ENGINE CAN 3X400V, 50 HZ, POWER OUTLET CONNECTION EURO 32 A REQUEST BE BUILT UP 350 MM DIAMETER INSERTION SLOT FLIGHT CIRCLE DIAMETER ROTOR 200 X 400 MM ROTOR WITH 2 PARTS OF THE HAMMER 2 X 13 HAMMERS MADE OF HARDOX SPEED ROTOR NOMINAL 1000 RPM. HEIGHT 1750 MM (CAN BE CUSTOMIZED) WEIGHT APPROX. 330 KG BODY BRAKE ON ALL WHEELS, TOWING EYE FRONT AND REAR, AUTOM. LOADING AVAILABLE ON REQUEST SPARE PARTS/SERVICE MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN SUBJECT TO CHANGES, ERRORS, AND INTERMEDIATE SALE! MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 1.150.000 €
Ubicación: Land-wood - fired biomass power plant / bio. power plant with generation

furnace  		brand c. combuster 
type   sdf 100 
capacity  7,500,000 k cal  / hr 
combustion capacity  2000kg / hour wood 
1000 kg / hour household waste  

beel industrial boilers - boiler brand 
type  minster  
steam capacity  8.5 ton / hour
steam pressure 13 bar 
5690 kw power  

turbo genset 		type  		turbodyne dresser rand 
 					520 kw electrical power

condenser 		type		alfa laval ak 20 fm 

fuel gas filter 	cloth filter bmd sl gtf 


this is rounded off with economiser, feed pumps, condensate tank, central switcbord, water softener, fireplace, 3 heaters, a shipping container, etc. 

pls. contact us fir more materials

for your att. a new plant like that will at least 16 million euro.
 

       WOOD - FIRED BIOMASS POWER PLANT / BIO. POWER PLANT WITH GENERATION FURNACE BRAND C. COMBUSTER TYPE SDF 100 CAPACITY 7,500,000 K CAL / HR COMBUSTION CAPACITY 2000KG / HOUR WOOD 1000 KG / HOUR HOUSEHOLD WASTE BEEL INDUSTRIAL BOILERS - BOILER BRAND TYPE MINSTER STEAM CAPACITY 8.5 TON / HOUR STEAM PRESSURE 13 BAR 5690 KW POWER TURBO GENSET TYPE TURBODYNE DRESSER RAND 520 KW ELECTRICAL POWER CONDENSER TYPE ALFA LAVAL AK 20 FM FUEL GAS FILTER CLOTH FILTER BMD SL GTF THIS IS ROUNDED OFF WITH ECONOMISER, FEED PUMPS, CONDENSATE TANK, CENTRAL SWITCBORD, WATER SOFTENER, FIREPLACE, 3 HEATERS, A SHIPPING CONTAINER, ETC. PLS. CONTACT US FIR MORE MATERIALS FOR YOUR ATT. A NEW PLANT LIKE THAT WILL AT LEAST 16 MILLION EURO.
Vendedor: Hadar Trading Ltd
Año de construcción: usado
Precio: 1.750.000 €
Ubicación: Land-wood - fired biomass power plant / bio. power plant with generation

furnace  		brand c. combuster 
type   sdf 100 
capacity  7,500,000 k cal  / hr 
combustion capacity  2000kg / hour wood 
1000 kg / hour household waste  

beel industrial boilers - boiler brand 
type  minster  
steam capacity  8.5 ton / hour
steam pressure 13 bar 
5690 kw power  

turbo genset 		type  		turbodyne dresser rand 
 					520 kw electrical power

condenser 		type		alfa laval ak 20 fm 

fuel gas filter 	cloth filter bmd sl gtf 


this is rounded off with economiser, feed pumps, condensate tank, central switcbord, water softener, fireplace, 3 heaters, a shipping container, etc. 

pls. contact us fir more materials


for your att. a new plant like that will at least 16 million euro.

       WOOD - FIRED BIOMASS POWER PLANT / BIO. POWER PLANT WITH GENERATION FURNACE BRAND C. COMBUSTER TYPE SDF 100 CAPACITY 7,500,000 K CAL / HR COMBUSTION CAPACITY 2000KG / HOUR WOOD 1000 KG / HOUR HOUSEHOLD WASTE BEEL INDUSTRIAL BOILERS - BOILER BRAND TYPE MINSTER STEAM CAPACITY 8.5 TON / HOUR STEAM PRESSURE 13 BAR 5690 KW POWER TURBO GENSET TYPE TURBODYNE DRESSER RAND 520 KW ELECTRICAL POWER CONDENSER TYPE ALFA LAVAL AK 20 FM FUEL GAS FILTER CLOTH FILTER BMD SL GTF THIS IS ROUNDED OFF WITH ECONOMISER, FEED PUMPS, CONDENSATE TANK, CENTRAL SWITCBORD, WATER SOFTENER, FIREPLACE, 3 HEATERS, A SHIPPING CONTAINER, ETC. PLS. CONTACT US FIR MORE MATERIALS FOR YOUR ATT. A NEW PLANT LIKE THAT WILL AT LEAST 16 MILLION EURO.
Vendedor: Hadar Trading Ltd
Año de construcción: usado
Precio: 1.150.000 €
Ubicación: Land-bio. power plant with generation

furnace  		brand c. combuster 
type   sdf 100 
capacity  7,500,000 k cal  / hr 
combustion capacity  2000kg / hour wood 
1000 kg / hour household waste  

beel industrial boilers - boiler brand 
type  minster  
steam capacity  8.5 ton / hour
steam pressure 13 bar 
5690 kw power  

turbo genset 		type  		turbodyne dresser rand 
 					520 kw electrical power

condenser 		type		alfa laval ak 20 fm 

fuel gas filter 	cloth filter bmd sl gtf 


this is rounded off with economiser, feed pumps, condensate tank, central switcbord, water softener, fireplace, 3 heaters, a shipping container, etc. 

pls. contact us fir more materials


for your att. a new plant like that will at least 16 million euro.

   BIO. POWER PLANT WITH GENERATION FURNACE BRAND C. COMBUSTER TYPE SDF 100 CAPACITY 7,500,000 K CAL / HR COMBUSTION CAPACITY 2000KG / HOUR WOOD 1000 KG / HOUR HOUSEHOLD WASTE BEEL INDUSTRIAL BOILERS - BOILER BRAND TYPE MINSTER STEAM CAPACITY 8.5 TON / HOUR STEAM PRESSURE 13 BAR 5690 KW POWER TURBO GENSET TYPE TURBODYNE DRESSER RAND 520 KW ELECTRICAL POWER CONDENSER TYPE ALFA LAVAL AK 20 FM FUEL GAS FILTER CLOTH FILTER BMD SL GTF THIS IS ROUNDED OFF WITH ECONOMISER, FEED PUMPS, CONDENSATE TANK, CENTRAL SWITCBORD, WATER SOFTENER, FIREPLACE, 3 HEATERS, A SHIPPING CONTAINER, ETC. PLS. CONTACT US FIR MORE MATERIALS FOR YOUR ATT. A NEW PLANT LIKE THAT WILL AT LEAST 16 MILLION EURO.
Vendedor: Hadar Trading Ltd
Año de construcción: usado
Ubicación: Land-1 margasa textile waste cutting machine type cmt 500
rotary cutter, year 2000, working width 500 mm, 2 sets of baldes, inverter 1 MARGASA TEXTILE WASTE CUTTING MACHINE TYPE CMT 500 ROTARY CUTTER, YEAR 2000, WORKING WIDTH 500 MM, 2 SETS OF BALDES, INVERTER
Vendedor: LUSAMATEX - Máquinas Têxteis, Lda.
Año de construcción: usado
Ubicación: Land-new v2a polymer station - no hours of operation!
-3 chambers
-2 agitators
dimensions: lxwxh 2, 25 x 0, 75 x 1, 25 m

-adjustable speed
-netzsch liquid polymer pump 0-25 l / h
-frequency inverter
-electronic level control on exactly 1 mm
-water valve 1 "with water quantity measurement 1 litre per pulse
(concentration is calculated automatically)

cabinet: siemens plc and lcd display in the door
active substance concentration can be adjusted
lcd display
the plant is located in top condition!

metering units are used, where larger amounts of polymers are required.
the application of polymers is often indispensable for processes of solid / liquid separation.

for the cleaning of waste water in treatment plants, clarification of raw and surface water including polymer solutions used.

this use of polymer solutions significantly improves the drainage behaviour of the thickened sludge in the downstream drainage systems. the sedimentation or flotation of suspended solids is accelerated.

polymers cannot be used mostly as a concentrate.
the system allows making a ready-made, highly effective polymer solution.
master polymer and water is mixed. a precise dosage of the polymer allows the eccentric screw pump.
the mixture is pumped into a solution tank and the dosage reaches to your locations.

the system is controlled by a plc.
it involves switching and control cabinet a new turnkey system without operating hours (!), including. NEW V2A POLYMER STATION - NO HOURS OF OPERATION! -3 CHAMBERS -2 AGITATORS DIMENSIONS: LXWXH 2, 25 X 0, 75 X 1, 25 M -ADJUSTABLE SPEED -NETZSCH LIQUID POLYMER PUMP 0-25 L / H -FREQUENCY INVERTER -ELECTRONIC LEVEL CONTROL ON EXACTLY 1 MM -WATER VALVE 1 "WITH WATER QUANTITY MEASUREMENT 1 LITRE PER PULSE (CONCENTRATION IS CALCULATED AUTOMATICALLY) CABINET: SIEMENS PLC AND LCD DISPLAY IN THE DOOR ACTIVE SUBSTANCE CONCENTRATION CAN BE ADJUSTED LCD DISPLAY THE PLANT IS LOCATED IN TOP CONDITION! METERING UNITS ARE USED, WHERE LARGER AMOUNTS OF POLYMERS ARE REQUIRED. THE APPLICATION OF POLYMERS IS OFTEN INDISPENSABLE FOR PROCESSES OF SOLID / LIQUID SEPARATION. FOR THE CLEANING OF WASTE WATER IN TREATMENT PLANTS, CLARIFICATION OF RAW AND SURFACE WATER INCLUDING POLYMER SOLUTIONS USED. THIS USE OF POLYMER SOLUTIONS SIGNIFICANTLY IMPROVES THE DRAINAGE BEHAVIOUR OF THE THICKENED SLUDGE IN THE DOWNSTREAM DRAINAGE SYSTEMS. THE SEDIMENTATION OR FLOTATION OF SUSPENDED SOLIDS IS ACCELERATED. POLYMERS CANNOT BE USED MOSTLY AS A CONCENTRATE. THE SYSTEM ALLOWS MAKING A READY-MADE, HIGHLY EFFECTIVE POLYMER SOLUTION. MASTER POLYMER AND WATER IS MIXED. A PRECISE DOSAGE OF THE POLYMER ALLOWS THE ECCENTRIC SCREW PUMP. THE MIXTURE IS PUMPED INTO A SOLUTION TANK AND THE DOSAGE REACHES TO YOUR LOCATIONS. THE SYSTEM IS CONTROLLED BY A PLC. IT INVOLVES SWITCHING AND CONTROL CABINET A NEW TURNKEY SYSTEM WITHOUT OPERATING HOURS (!), INCLUDING.
Vendedor: REWA Gruppe - REWA KFP GmbH
Año de construcción: usado
Ubicación: Land-mining technology used delivery options:

offers mining machinery and equipment
 
* abrasion-resistant materials
cables, hoses and tubes
* chains and wire ropes
chemicals and reagents
* communications systems and equipment
* continuous miner and cutting device
* control and automation systems
* conveyors, components, and accessories
* crusher, crushers and grinding mills
* dredging and dredge equipment
* drilling and blasting
* electrical appliances, batteries and lighting
motors, electric, and diesel
* environmental and emission control
* production and processing
* flotation, agglomeration and filtering
* gaskets and fasteners
* health and safety services and facilities
 
* heating, ventilation and air conditioning
* hydraulics and electromechanical equipment
* loaders, trucks and freight forwarding
 
* mining locomotives
* mining cars
* heavy opencast rail &amp; systems
* noise, shock control and anti-vibration
* off-highway maintenance equipment
* power supply, engines, transmissions and drive technology
* process and separation systems
* pumps, compressors, valves and actuators
* quality control, testing, and analysis
* screening, separation and vibration
* sensors and detectors
* shaft equipment, winding and winches
* software for mine data and resource management
* steel, metals, plastics and welding
* support technology and strata control
* surface and highwall mining machines
* survey systems and equipment
* tracks, wheels and tires
* tunnel construction equipment
* water and sewage management
* workshop equipment, consumables and lubricants

with best regards

equipos para la minería,.
 
* material resistant à la abrasión
* los cables, mangueras y tuberías
* las cadenas y cables metálicos
* productos of químicos y reactivos
* sistemas de comunicación y equipo
* mineros continua y equipo de corte
* sistemas de control y automatización
* transportadores, componentes y accesorios
* trituradoras, interruptores y molinos
* dragado y equipo de dragado
* perforación y voladura
* equipos eléctricos, pilas y de iluminación
* motores of eléctricos y diesel
* medio ambiente y el control de emisiones
* fabricación y mecanizado
* flotación, aglomeración y filtrado
* juntas y sello
* salud y servicios de seguridad y offer
 
* calefacción, ventilación y aire acondicionado
* hidráulica y equipos electromecánicos
* cargadores, camiones y transporte
 
* locomotoras minería
* los vagones minería
* minig rail &amp; sistemas
* el ruido, control de choque y vibraciones de lucha contra el
* fuera de carretera de mantenimiento de equipo
* fuente de alimentación, transmisión, motores y unidades
* plantas de procesos y sistemas de separación
* las bombas, compresores, válvulas y actuadores
* control de calidad, pruebas y of análisis
* detección, separación y vibraciones
* sensores y detectores
* equipo del eje la bobina y cabrestantes
* software para datos de minas y of gestión de recursos
* acero, metales especiales, plásticos y soldadura
* tecnología de apoyo y control de los estratos
* equipo de minería de superficie y highwall
* sistemas de estudio y equipo
* piezas, ruedas y of neumáticos
* sistemas de construcción de túneles y equipo
* agua y of gestión de aguas residual
* taller de equipos, consumibles y lubricantes

offer: mining equipment new and used
 
* abrasion resistant material
* cables, hoses and pipes
* chains and wire ropes
* chemicals and reagents
* communications systems and equipment
* continuous miners and cutting equipment
* control and automation systems
* conveyors, components and accessories
* crushers, breakers and grinding mills
* dredging and dredge equipment
* drilling and blasting
* electrical equipment, batteries and lighting
* engines, electric and diesel
* environment and emissions control
* fabrication and machining
* flotation, agglomeration and filtering
* gaskets and seals
* health and safety services and equipment
 
* heating, ventilation and air conditioning
* hydraulics and electromechanical equipment
* loaders, trucks and haulage
 
* mining locomotives
* mining cars
* minig rail &amp; systems
* noise, shock control and anti-vibration
* off-highway maintenance equipment
* power supply, engines, transmission and drives
* process plants and separation system
* pumps, compressors, valves and actuators
* quality control, testing and analysis
* screening, separation and vibration
* sensors and detectors
* shaft equipment, winding and winches
* software for mine data and resource management
* steel, special metals, plastics and welding
* support technology and strata control
* surface and highwall mining equipment
* survey systems and equipment
* tracks, wheels and tires
* tunnelling systems and equipment
* water and wastewater management
* workshop equipment, consumables and lubricants

semi-armor d'exploitation minière
 
atériaux résistants à l ' abrasion *.
* les câbles, tuyaux et conduites
* métalliques chaînes et câbles
* produits chimiques et réactifs
* communications systèmes et équipements
* les mineurs continue et de l ' Équipement de coupe
* contrôle et systèmes d ' automation
convoyeurs *, composants et accessoires
concasseur *, breakers et broyeurs
* dragage et de l ' Équipement de dragage
* forage et dynamitage
* appareils électriques, batteries et d ' éclairage
* les moteurs électriques et diesel
* environnement et de contrôle of the emission
fabrication and machining.
* flottation, agglomération et filtrage
joints and joints.
born santé et services de sécurité et Équipement
 
* chauffage, ventilation et climatisation
* hydraulique et de l ' équipement électromécanique
chargeuses *, de camions et de débardage
 
locomotives mines.
wagons miniers.
rail minig * &amp; systems
* bruit, le choc de contrôle et anti-vibration
* maintenance de l ' équipement of hors route
* feeding, moteurs, transmission and drives
* installation de traitement et separation system
* pompes, compresseurs, vannes et microtechnics
* contrôle de la qualité, d'essai et d'analyse
* dépistage, la séparation et de vibrations
* les capteurs et détecteurs
equipement of the puits *, liquidation et treuils
* logiciel pour extraire of données et gestion of the ressources
* acier, métaux spéciaux, plastiques et de soudage
* l ' appui technologique et le contrôle of strates
surface * et l ' équipement minier highwall
survey system * et de l ' équipement
* coups, roues et pneus
* systèmes de tunnels et de l ' équipement
* eau et de gestion of the eaux usées
* Équipement d ' atelier, consommables et lubrifiants

 MINING TECHNOLOGY USED DELIVERY OPTIONS: OFFERS MINING MACHINERY AND EQUIPMENT * ABRASION-RESISTANT MATERIALS CABLES, HOSES AND TUBES * CHAINS AND WIRE ROPES CHEMICALS AND REAGENTS * COMMUNICATIONS SYSTEMS AND EQUIPMENT * CONTINUOUS MINER AND CUTTING DEVICE * CONTROL AND AUTOMATION SYSTEMS * CONVEYORS, COMPONENTS, AND ACCESSORIES * CRUSHER, CRUSHERS AND GRINDING MILLS * DREDGING AND DREDGE EQUIPMENT * DRILLING AND BLASTING * ELECTRICAL APPLIANCES, BATTERIES AND LIGHTING MOTORS, ELECTRIC, AND DIESEL * ENVIRONMENTAL AND EMISSION CONTROL * PRODUCTION AND PROCESSING * FLOTATION, AGGLOMERATION AND FILTERING * GASKETS AND FASTENERS * HEALTH AND SAFETY SERVICES AND FACILITIES * HEATING, VENTILATION AND AIR CONDITIONING * HYDRAULICS AND ELECTROMECHANICAL EQUIPMENT * LOADERS, TRUCKS AND FREIGHT FORWARDING * MINING LOCOMOTIVES * MINING CARS * HEAVY OPENCAST RAIL &AMP; SYSTEMS * NOISE, SHOCK CONTROL AND ANTI-VIBRATION * OFF-HIGHWAY MAINTENANCE EQUIPMENT * POWER SUPPLY, ENGINES, TRANSMISSIONS AND DRIVE TECHNOLOGY * PROCESS AND SEPARATION SYSTEMS * PUMPS, COMPRESSORS, VALVES AND ACTUATORS * QUALITY CONTROL, TESTING, AND ANALYSIS * SCREENING, SEPARATION AND VIBRATION * SENSORS AND DETECTORS * SHAFT EQUIPMENT, WINDING AND WINCHES * SOFTWARE FOR MINE DATA AND RESOURCE MANAGEMENT * STEEL, METALS, PLASTICS AND WELDING * SUPPORT TECHNOLOGY AND STRATA CONTROL * SURFACE AND HIGHWALL MINING MACHINES * SURVEY SYSTEMS AND EQUIPMENT * TRACKS, WHEELS AND TIRES * TUNNEL CONSTRUCTION EQUIPMENT * WATER AND SEWAGE MANAGEMENT * WORKSHOP EQUIPMENT, CONSUMABLES AND LUBRICANTS WITH BEST REGARDS EQUIPOS PARA LA MINERíA,. * MATERIAL RESISTANT à LA ABRASIóN * LOS CABLES, MANGUERAS Y TUBERíAS * LAS CADENAS Y CABLES METáLICOS * PRODUCTOS OF QUíMICOS Y REACTIVOS * SISTEMAS DE COMUNICACIóN Y EQUIPO * MINEROS CONTINUA Y EQUIPO DE CORTE * SISTEMAS DE CONTROL Y AUTOMATIZACIóN * TRANSPORTADORES, COMPONENTES Y ACCESORIOS * TRITURADORAS, INTERRUPTORES Y MOLINOS * DRAGADO Y EQUIPO DE DRAGADO * PERFORACIóN Y VOLADURA * EQUIPOS ELéCTRICOS, PILAS Y DE ILUMINACIóN * MOTORES OF ELéCTRICOS Y DIESEL * MEDIO AMBIENTE Y EL CONTROL DE EMISIONES * FABRICACIóN Y MECANIZADO * FLOTACIóN, AGLOMERACIóN Y FILTRADO * JUNTAS Y SELLO * SALUD Y SERVICIOS DE SEGURIDAD Y OFFER * CALEFACCIóN, VENTILACIóN Y AIRE ACONDICIONADO * HIDRáULICA Y EQUIPOS ELECTROMECáNICOS * CARGADORES, CAMIONES Y TRANSPORTE * LOCOMOTORAS MINERíA * LOS VAGONES MINERíA * MINIG RAIL &AMP; SISTEMAS * EL RUIDO, CONTROL DE CHOQUE Y VIBRACIONES DE LUCHA CONTRA EL * FUERA DE CARRETERA DE MANTENIMIENTO DE EQUIPO * FUENTE DE ALIMENTACIóN, TRANSMISIóN, MOTORES Y UNIDADES * PLANTAS DE PROCESOS Y SISTEMAS DE SEPARACIóN * LAS BOMBAS, COMPRESORES, VáLVULAS Y ACTUADORES * CONTROL DE CALIDAD, PRUEBAS Y OF ANáLISIS * DETECCIóN, SEPARACIóN Y VIBRACIONES * SENSORES Y DETECTORES * EQUIPO DEL EJE LA BOBINA Y CABRESTANTES * SOFTWARE PARA DATOS DE MINAS Y OF GESTIóN DE RECURSOS * ACERO, METALES ESPECIALES, PLáSTICOS Y SOLDADURA * TECNOLOGíA DE APOYO Y CONTROL DE LOS ESTRATOS * EQUIPO DE MINERíA DE SUPERFICIE Y HIGHWALL * SISTEMAS DE ESTUDIO Y EQUIPO * PIEZAS, RUEDAS Y OF NEUMáTICOS * SISTEMAS DE CONSTRUCCIóN DE TúNELES Y EQUIPO * AGUA Y OF GESTIóN DE AGUAS RESIDUAL * TALLER DE EQUIPOS, CONSUMIBLES Y LUBRICANTES OFFER: MINING EQUIPMENT NEW AND USED * ABRASION RESISTANT MATERIAL * CABLES, HOSES AND PIPES * CHAINS AND WIRE ROPES * CHEMICALS AND REAGENTS * COMMUNICATIONS SYSTEMS AND EQUIPMENT * CONTINUOUS MINERS AND CUTTING EQUIPMENT * CONTROL AND AUTOMATION SYSTEMS * CONVEYORS, COMPONENTS AND ACCESSORIES * CRUSHERS, BREAKERS AND GRINDING MILLS * DREDGING AND DREDGE EQUIPMENT * DRILLING AND BLASTING * ELECTRICAL EQUIPMENT, BATTERIES AND LIGHTING * ENGINES, ELECTRIC AND DIESEL * ENVIRONMENT AND EMISSIONS CONTROL * FABRICATION AND MACHINING * FLOTATION, AGGLOMERATION AND FILTERING * GASKETS AND SEALS * HEALTH AND SAFETY SERVICES AND EQUIPMENT * HEATING, VENTILATION AND AIR CONDITIONING * HYDRAULICS AND ELECTROMECHANICAL EQUIPMENT * LOADERS, TRUCKS AND HAULAGE * MINING LOCOMOTIVES * MINING CARS * MINIG RAIL &AMP; SYSTEMS * NOISE, SHOCK CONTROL AND ANTI-VIBRATION * OFF-HIGHWAY MAINTENANCE EQUIPMENT * POWER SUPPLY, ENGINES, TRANSMISSION AND DRIVES * PROCESS PLANTS AND SEPARATION SYSTEM * PUMPS, COMPRESSORS, VALVES AND ACTUATORS * QUALITY CONTROL, TESTING AND ANALYSIS * SCREENING, SEPARATION AND VIBRATION * SENSORS AND DETECTORS * SHAFT EQUIPMENT, WINDING AND WINCHES * SOFTWARE FOR MINE DATA AND RESOURCE MANAGEMENT * STEEL, SPECIAL METALS, PLASTICS AND WELDING * SUPPORT TECHNOLOGY AND STRATA CONTROL * SURFACE AND HIGHWALL MINING EQUIPMENT * SURVEY SYSTEMS AND EQUIPMENT * TRACKS, WHEELS AND TIRES * TUNNELLING SYSTEMS AND EQUIPMENT * WATER AND WASTEWATER MANAGEMENT * WORKSHOP EQUIPMENT, CONSUMABLES AND LUBRICANTS SEMI-ARMOR D'EXPLOITATION MINIèRE ATéRIAUX RéSISTANTS à L ' ABRASION *. * LES CâBLES, TUYAUX ET CONDUITES * MéTALLIQUES CHAîNES ET CâBLES * PRODUITS CHIMIQUES ET RéACTIFS * COMMUNICATIONS SYSTèMES ET éQUIPEMENTS * LES MINEURS CONTINUE ET DE L ' ÉQUIPEMENT DE COUPE * CONTRôLE ET SYSTèMES D ' AUTOMATION CONVOYEURS *, COMPOSANTS ET ACCESSOIRES CONCASSEUR *, BREAKERS ET BROYEURS * DRAGAGE ET DE L ' ÉQUIPEMENT DE DRAGAGE * FORAGE ET DYNAMITAGE * APPAREILS éLECTRIQUES, BATTERIES ET D ' éCLAIRAGE * LES MOTEURS éLECTRIQUES ET DIESEL * ENVIRONNEMENT ET DE CONTRôLE OF THE EMISSION FABRICATION AND MACHINING. * FLOTTATION, AGGLOMéRATION ET FILTRAGE JOINTS AND JOINTS. BORN SANTé ET SERVICES DE SéCURITé ET ÉQUIPEMENT * CHAUFFAGE, VENTILATION ET CLIMATISATION * HYDRAULIQUE ET DE L ' éQUIPEMENT éLECTROMéCANIQUE CHARGEUSES *, DE CAMIONS ET DE DéBARDAGE LOCOMOTIVES MINES. WAGONS MINIERS. RAIL MINIG * &AMP; SYSTEMS * BRUIT, LE CHOC DE CONTRôLE ET ANTI-VIBRATION * MAINTENANCE DE L ' éQUIPEMENT OF HORS ROUTE * FEEDING, MOTEURS, TRANSMISSION AND DRIVES * INSTALLATION DE TRAITEMENT ET SEPARATION SYSTEM * POMPES, COMPRESSEURS, VANNES ET MICROTECHNICS * CONTRôLE DE LA QUALITé, D'ESSAI ET D'ANALYSE * DéPISTAGE, LA SéPARATION ET DE VIBRATIONS * LES CAPTEURS ET DéTECTEURS EQUIPEMENT OF THE PUITS *, LIQUIDATION ET TREUILS * LOGICIEL POUR EXTRAIRE OF DONNéES ET GESTION OF THE RESSOURCES * ACIER, MéTAUX SPéCIAUX, PLASTIQUES ET DE SOUDAGE * L ' APPUI TECHNOLOGIQUE ET LE CONTRôLE OF STRATES SURFACE * ET L ' éQUIPEMENT MINIER HIGHWALL SURVEY SYSTEM * ET DE L ' éQUIPEMENT * COUPS, ROUES ET PNEUS * SYSTèMES DE TUNNELS ET DE L ' éQUIPEMENT * EAU ET DE GESTION OF THE EAUX USéES * ÉQUIPEMENT D ' ATELIER, CONSOMMABLES ET LUBRIFIANTS
Vendedor: Trade and Translations
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)