46 ofertas

Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-band saws-hydraulic amada hfa 400
manufacturer: amada weight: approx. 2.2 t
type: hfa 400

cutting width: 415 mm
cutting height: 415 mm
blade length: 4570 mm
blade width: 34 mm

machine dimensions (l x w x h): 2285 x 2697 x 1575 mm

complete engine package consisting of:

1 band saw amada hd 800 2. mechanical grinder lima 400 l 3 sadowski press brake hap 200 x 3600kn
4. darley table shears gs 3100 x 18 5 helmut lotze press brake 309 x 3000 kn 6 radial drilling machine wagner prc 60 7 elb flat sander swb 010 vaii of 8 heckert thrower fu 315/e of 9 nardini nd 220ae of 10 nardini sz 250 t 11 2 x ã¤tere milling 12 band saw ama small
13 welding equipment
 BAND SAWS-HYDRAULIC AMADA HFA 400 MANUFACTURER: AMADA WEIGHT: APPROX. 2.2 T TYPE: HFA 400 CUTTING WIDTH: 415 MM CUTTING HEIGHT: 415 MM BLADE LENGTH: 4570 MM BLADE WIDTH: 34 MM MACHINE DIMENSIONS (L X W X H): 2285 X 2697 X 1575 MM COMPLETE ENGINE PACKAGE CONSISTING OF: 1 BAND SAW AMADA HD 800 2. MECHANICAL GRINDER LIMA 400 L 3 SADOWSKI PRESS BRAKE HAP 200 X 3600KN 4. DARLEY TABLE SHEARS GS 3100 X 18 5 HELMUT LOTZE PRESS BRAKE 309 X 3000 KN 6 RADIAL DRILLING MACHINE WAGNER PRC 60 7 ELB FLAT SANDER SWB 010 VAII OF 8 HECKERT THROWER FU 315/E OF 9 NARDINI ND 220AE OF 10 NARDINI SZ 250 T 11 2 X äTERE MILLING 12 BAND SAW AMA SMALL 13 WELDING EQUIPMENT
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3500 mm<br/>stroke: 340 mm<br/>throat: 210 mm<br/>dayligth: 550 mm<br/>weight of the machine ca.: 16 t<br/>dimensions of the machine ca.:  4,00 x 2,40 x 3,18 m<br/>equipment:<br/>- control: dnc90<br/>- 2 movable support arms<br/>- central crowning<br/>- controlled axes: y1, y2, x, x1, z1, z2, r<br/>- upper tool about 3000mm, divided<br/>- block die 3000mm: v6, v32, v10, v36, v16, v24<br/><br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3500 MM
STROKE: 340 MM
THROAT: 210 MM
DAYLIGTH: 550 MM
WEIGHT OF THE MACHINE CA.: 16 T
DIMENSIONS OF THE MACHINE CA.: 4,00 X 2,40 X 3,18 M
EQUIPMENT:
- CONTROL: DNC90
- 2 MOVABLE SUPPORT ARMS
- CENTRAL CROWNING
- CONTROLLED AXES: Y1, Y2, X, X1, Z1, Z2, R
- UPPER TOOL ABOUT 3000MM, DIVIDED
- BLOCK DIE 3000MM: V6, V32, V10, V36, V16, V24





Vendedor: Frech GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-lathe nardini sz 250 t with digital display
manufacturer: nardini weight: 2,5 t type: sz 250 t

tip height: 260 mm
tip height for bed rip-offs: 350 mm
centre distance: 1500 mm
spindle speed: 19-1500 rpm
spindle passage: 80 mm
maximum circulation over bed: 500 mm
maximum circulation over cross slide: 300 mm

recording: mk4

machine dimensions (l x w x h): 3300 mm x 1200 mm x 1700 mm

complete engine package consisting of:

1 band saw amada hd 800 2. mechanical grinder lima 400 l 3 sadowski press brake hap 200 x 3600kn
4. darley table shears gs 3100 x 18 5 helmut lotze press brake 309 x 3000 kn 6 radial drilling machine wagner prc 60 7 elb flat sander swb 010 vaii of 8 heckert thrower fu 315/e of 9 nardini nd 220ae of 10 nardini sz 250 t 11 2 x ã¤tere milling 12 band saw ama small
13 welding equipment
 LATHE NARDINI SZ 250 T WITH DIGITAL DISPLAY MANUFACTURER: NARDINI WEIGHT: 2,5 T TYPE: SZ 250 T TIP HEIGHT: 260 MM TIP HEIGHT FOR BED RIP-OFFS: 350 MM CENTRE DISTANCE: 1500 MM SPINDLE SPEED: 19-1500 RPM SPINDLE PASSAGE: 80 MM MAXIMUM CIRCULATION OVER BED: 500 MM MAXIMUM CIRCULATION OVER CROSS SLIDE: 300 MM RECORDING: MK4 MACHINE DIMENSIONS (L X W X H): 3300 MM X 1200 MM X 1700 MM COMPLETE ENGINE PACKAGE CONSISTING OF: 1 BAND SAW AMADA HD 800 2. MECHANICAL GRINDER LIMA 400 L 3 SADOWSKI PRESS BRAKE HAP 200 X 3600KN 4. DARLEY TABLE SHEARS GS 3100 X 18 5 HELMUT LOTZE PRESS BRAKE 309 X 3000 KN 6 RADIAL DRILLING MACHINE WAGNER PRC 60 7 ELB FLAT SANDER SWB 010 VAII OF 8 HECKERT THROWER FU 315/E OF 9 NARDINI ND 220AE OF 10 NARDINI SZ 250 T 11 2 X &ATILDE;&CURREN;TERE MILLING 12 BAND SAW AMA SMALL 13 WELDING EQUIPMENT
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>chamfer lenght:3600 mm<br/>distance between columns:3050 mm<br/>arm length:300 mm<br/>table height:950 mm<br/>daylight opening:655 mm<br/>stroke:315 mm<br/>ajustment speed:125 mm/sec<br/>return speed:69 mm/sec<br/>working feed:10 mm/sec<br/>total power requirement:18,5 kw<br/>weight of the machine ca.:15,0 t<br/>dimensions of the machine ca.:5,0 x 2,1 x 3,2 m<br/><br/> PRESSURE:160 T
CHAMFER LENGHT:3600 MM
DISTANCE BETWEEN COLUMNS:3050 MM
ARM LENGTH:300 MM
TABLE HEIGHT:950 MM
DAYLIGHT OPENING:655 MM
STROKE:315 MM
AJUSTMENT SPEED:125 MM/SEC
RETURN SPEED:69 MM/SEC
WORKING FEED:10 MM/SEC
TOTAL POWER REQUIREMENT:18,5 KW
WEIGHT OF THE MACHINE CA.:15,0 T
DIMENSIONS OF THE MACHINE CA.:5,0 X 2,1 X 3,2 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-lathe nardini nd 220 ae with digital display
manufacturer: nardini weight: 1,7 t type: nd 220 ae

tip height: 220 mm
tip height for bed rip-offs: 330 mm
centre distance: 1500 mm
spindle speed: 25-2000 rpm
spindle passage: 52 mm maximum circular bed: 440 mm
maximum circulation over cross slide: 270 mm
maximum circulation in the offset front face plate: 200 mm
recording: mk3

machine dimensions (l x w x h): 3000 mm x 1050 mm x 1700 mm

complete engine package consisting of:

1 band saw amada hd 800 2. mechanical grinder lima 400 l 3 sadowski press brake hap 200 x 3600kn
4. darley table shears gs 3100 x 18 5 helmut lotze press brake 309 x 3000 kn 6 radial drilling machine wagner prc 60 7 elb flat sander swb 010 vaii of 8 heckert thrower fu 315/e of 9 nardini nd 220ae of 10 nardini sz 250 t 11 2 x ã¤tere milling 12 band saw ama small
13 welding equipment
 LATHE NARDINI ND 220 AE WITH DIGITAL DISPLAY MANUFACTURER: NARDINI WEIGHT: 1,7 T TYPE: ND 220 AE TIP HEIGHT: 220 MM TIP HEIGHT FOR BED RIP-OFFS: 330 MM CENTRE DISTANCE: 1500 MM SPINDLE SPEED: 25-2000 RPM SPINDLE PASSAGE: 52 MM MAXIMUM CIRCULAR BED: 440 MM MAXIMUM CIRCULATION OVER CROSS SLIDE: 270 MM MAXIMUM CIRCULATION IN THE OFFSET FRONT FACE PLATE: 200 MM RECORDING: MK3 MACHINE DIMENSIONS (L X W X H): 3000 MM X 1050 MM X 1700 MM COMPLETE ENGINE PACKAGE CONSISTING OF: 1 BAND SAW AMADA HD 800 2. MECHANICAL GRINDER LIMA 400 L 3 SADOWSKI PRESS BRAKE HAP 200 X 3600KN 4. DARLEY TABLE SHEARS GS 3100 X 18 5 HELMUT LOTZE PRESS BRAKE 309 X 3000 KN 6 RADIAL DRILLING MACHINE WAGNER PRC 60 7 ELB FLAT SANDER SWB 010 VAII OF 8 HECKERT THROWER FU 315/E OF 9 NARDINI ND 220AE OF 10 NARDINI SZ 250 T 11 2 X &ATILDE;&CURREN;TERE MILLING 12 BAND SAW AMA SMALL 13 WELDING EQUIPMENT
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3500 mm<br/>distance between columns:  mm<br/>number of working hours: 6785 h<br/>weight of the machine ca.: 11,2 t<br/>dimensions of the machine ca.: 4,65 x 1,40 x 2,75 m<br/>equipment:<br/>- hydraulic tool clamping above<br/>- support arms<br/>- multiple block matrix<br/>- cranked upper tool<br/>- control cybelec dnc70<br/>- axes controlled: x, r, y1, y2<br/>- cnc controlled crowning<br/><br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3500 MM
DISTANCE BETWEEN COLUMNS: MM
NUMBER OF WORKING HOURS: 6785 H
WEIGHT OF THE MACHINE CA.: 11,2 T
DIMENSIONS OF THE MACHINE CA.: 4,65 X 1,40 X 2,75 M
EQUIPMENT:
- HYDRAULIC TOOL CLAMPING ABOVE
- SUPPORT ARMS
- MULTIPLE BLOCK MATRIX
- CRANKED UPPER TOOL
- CONTROL CYBELEC DNC70
- AXES CONTROLLED: X, R, Y1, Y2
- CNC CONTROLLED CROWNING





Vendedor: Frech GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-thrower heckert
manufacturer: wmw heckert weight: 3, 85t type: fu 315/e

x travel: 850 mm
y travel: 270 mm
z travel: 355 mm

table size: 1250 mm x 315 mm
spindle retainer: sk 50 spindle speeds: 28-1400 rpm
spindle drive: 5.5 kw
spindle torque: 1850 nm max
feeds - longitudinal and transverse: 16-800 mm / min
feeds - vertical: 5-250 mm / min
rapid traverse, longitudinal and transverse: 3.15 m / min
rapid traverse vertical: 1 m / min
table load: 1000 kg
table swivel +/-: 45 â°

machine dimensions (l x w x h): 2400 mm x 1700 mm x 2000 mm

complete engine package consisting of:

1 band saw amada hd 800 2. mechanical grinder lima 400 l 3 sadowski press brake hap 200 x 3600kn
4. darley table shears gs 3100 x 18 5 helmut lotze press brake 309 x 3000 kn 6 radial drilling machine wagner prc 60 7 elb flat sander swb 010 vaii of 8 heckert thrower fu 315/e of 9 nardini nd 220ae of 10 nardini sz 250 t 11 2 x ã¤tere milling 12 band saw ama small
13 welding equipment
 THROWER HECKERT MANUFACTURER: WMW HECKERT WEIGHT: 3, 85T TYPE: FU 315/E X TRAVEL: 850 MM Y TRAVEL: 270 MM Z TRAVEL: 355 MM TABLE SIZE: 1250 MM X 315 MM SPINDLE RETAINER: SK 50 SPINDLE SPEEDS: 28-1400 RPM SPINDLE DRIVE: 5.5 KW SPINDLE TORQUE: 1850 NM MAX FEEDS - LONGITUDINAL AND TRANSVERSE: 16-800 MM / MIN FEEDS - VERTICAL: 5-250 MM / MIN RAPID TRAVERSE, LONGITUDINAL AND TRANSVERSE: 3.15 M / MIN RAPID TRAVERSE VERTICAL: 1 M / MIN TABLE LOAD: 1000 KG TABLE SWIVEL +/-: 45 &ACIRC;&DEG; MACHINE DIMENSIONS (L X W X H): 2400 MM X 1700 MM X 2000 MM COMPLETE ENGINE PACKAGE CONSISTING OF: 1 BAND SAW AMADA HD 800 2. MECHANICAL GRINDER LIMA 400 L 3 SADOWSKI PRESS BRAKE HAP 200 X 3600KN 4. DARLEY TABLE SHEARS GS 3100 X 18 5 HELMUT LOTZE PRESS BRAKE 309 X 3000 KN 6 RADIAL DRILLING MACHINE WAGNER PRC 60 7 ELB FLAT SANDER SWB 010 VAII OF 8 HECKERT THROWER FU 315/E OF 9 NARDINI ND 220AE OF 10 NARDINI SZ 250 T 11 2 X &ATILDE;&CURREN;TERE MILLING 12 BAND SAW AMA SMALL 13 WELDING EQUIPMENT
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 4040 mm<br/>plate thickness: 6,00 mm<br/>total power requirement: 17 kw<br/>weight of the machine ca.: 10 t<br/>dimensions of the machine ca.: 5,20 x 1,50 x 2,00 m<br/>equipments:<br/>- cutting length limit<br/>- cutting angle adjustment<br/>- elgo control<br/>- controlled back gauge<br/>- photocell for back room protection<br/>- angle stop + support arms<br/><br/><br/><br/><br/><br/> SHEET WIDTH: 4040 MM
PLATE THICKNESS: 6,00 MM
TOTAL POWER REQUIREMENT: 17 KW
WEIGHT OF THE MACHINE CA.: 10 T
DIMENSIONS OF THE MACHINE CA.: 5,20 X 1,50 X 2,00 M
EQUIPMENTS:
- CUTTING LENGTH LIMIT
- CUTTING ANGLE ADJUSTMENT
- ELGO CONTROL
- CONTROLLED BACK GAUGE
- PHOTOCELL FOR BACK ROOM PROTECTION
- ANGLE STOP + SUPPORT ARMS





Vendedor: Frech GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-elb grinding machine grinding-magnetic
manufacturer: elb grinding weight: 5 tons
type: swb 010 vaii

grinding width: 500 mm
distance table - spindle mid: 580 mm
magnetic clamping plate: 1000 mm x 400 mm x 80 mm
grinding wheel diameter: 300 mm x 50 mm x 76 mm
grinding wheel speed: 1400 â?? 2800 u/min
table speed: 1-30 m / min
cross rapid traverse rate: 1.2 m / min
automatic cross feed: 1-60 mm / stroke
rapid traverse vertical: 0.15 m / min

machine dimensions (l x w x h): 3300 x 2200 x 2500 mm

complete engine package consisting of:

1 band saw amada hd 800 2. mechanical grinder lima 400 l 3 sadowski press brake hap 200 x 3600kn
4. darley table shears gs 3100 x 18 5 helmut lotze press brake 309 x 3000 kn 6 radial drilling machine wagner prc 60 7 elb flat sander swb 010 vaii of 8 heckert thrower fu 315/e of 9 nardini nd 220ae of 10 nardini sz 250 t 11 2 x ã¤tere milling 12 band saw ama small
13 welding equipment
 ELB GRINDING MACHINE GRINDING-MAGNETIC MANUFACTURER: ELB GRINDING WEIGHT: 5 TONS TYPE: SWB 010 VAII GRINDING WIDTH: 500 MM DISTANCE TABLE - SPINDLE MID: 580 MM MAGNETIC CLAMPING PLATE: 1000 MM X 400 MM X 80 MM GRINDING WHEEL DIAMETER: 300 MM X 50 MM X 76 MM GRINDING WHEEL SPEED: 1400 &ACIRC;?? 2800 U/MIN TABLE SPEED: 1-30 M / MIN CROSS RAPID TRAVERSE RATE: 1.2 M / MIN AUTOMATIC CROSS FEED: 1-60 MM / STROKE RAPID TRAVERSE VERTICAL: 0.15 M / MIN MACHINE DIMENSIONS (L X W X H): 3300 X 2200 X 2500 MM COMPLETE ENGINE PACKAGE CONSISTING OF: 1 BAND SAW AMADA HD 800 2. MECHANICAL GRINDER LIMA 400 L 3 SADOWSKI PRESS BRAKE HAP 200 X 3600KN 4. DARLEY TABLE SHEARS GS 3100 X 18 5 HELMUT LOTZE PRESS BRAKE 309 X 3000 KN 6 RADIAL DRILLING MACHINE WAGNER PRC 60 7 ELB FLAT SANDER SWB 010 VAII OF 8 HECKERT THROWER FU 315/E OF 9 NARDINI ND 220AE OF 10 NARDINI SZ 250 T 11 2 X &ATILDE;&CURREN;TERE MILLING 12 BAND SAW AMA SMALL 13 WELDING EQUIPMENT
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 13.900 €
Ubicación: Land-weight approx.: 16000 kg<br/>dimensions (l x w x h) approx.: 7000 x 2800 x 1800 mm<br/>description: - max. folding thickness: 2,5 mm<br> - folding lenght: 6000 mm<br> - control unit: cnc cybelec 7300<br> - hydraulic driven<br> - comes with extra tools<br> - maschinennummer: 1316660002 WEIGHT APPROX.: 16000 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 2800 X 1800 MM
DESCRIPTION: - MAX. FOLDING THICKNESS: 2,5 MM
- FOLDING LENGHT: 6000 MM
- CONTROL UNIT: CNC CYBELEC 7300
- HYDRAULIC DRIVEN
- COMES WITH EXTRA TOOLS
- MASCHINENNUMMER: 1316660002
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-radial drill wagner prc 60
manufacturer: wagner
year of construction: 1991
weight: 7 t type: prc 60

cube table (l x w x h): 800 mm x 630 mm x 500
spindle taper: mk5
spindle stroke: 400 mm
throat depth min - max: 450 mm - 2000 mm
column diameter: 450 mm
senkrechtverst. boom: 800 mm
hubgeschw. boom: 1.02 m / min
number of speeds: 16 / 20-1600
drilling depth adjustment scale: 151 mm
spindle drive: 5.5 kw
jacks: 2,2 kw
pillar clamp: 0.75 kw

machine dimensions (l x w x h): 3000 mm x 1250 mm x 3300 mm

complete engine package consisting of:

1 band saw amada hd 800 2. mechanical grinder lima 400 l 3 sadowski press brake hap 200 x 3600kn
4. darley table shears gs 3100 x 18 5 helmut lotze press brake 309 x 3000 kn 6 radial drilling machine wagner prc 60 7 elb flat sander swb 010 vaii of 8 heckert thrower fu 315/e of 9 nardini nd 220ae of 10 nardini sz 250 t 11 2 x ã¤tere milling 12 band saw ama small
13 welding equipment
 RADIAL DRILL WAGNER PRC 60 MANUFACTURER: WAGNER YEAR OF CONSTRUCTION: 1991 WEIGHT: 7 T TYPE: PRC 60 CUBE TABLE (L X W X H): 800 MM X 630 MM X 500 SPINDLE TAPER: MK5 SPINDLE STROKE: 400 MM THROAT DEPTH MIN - MAX: 450 MM - 2000 MM COLUMN DIAMETER: 450 MM SENKRECHTVERST. BOOM: 800 MM HUBGESCHW. BOOM: 1.02 M / MIN NUMBER OF SPEEDS: 16 / 20-1600 DRILLING DEPTH ADJUSTMENT SCALE: 151 MM SPINDLE DRIVE: 5.5 KW JACKS: 2,2 KW PILLAR CLAMP: 0.75 KW MACHINE DIMENSIONS (L X W X H): 3000 MM X 1250 MM X 3300 MM COMPLETE ENGINE PACKAGE CONSISTING OF: 1 BAND SAW AMADA HD 800 2. MECHANICAL GRINDER LIMA 400 L 3 SADOWSKI PRESS BRAKE HAP 200 X 3600KN 4. DARLEY TABLE SHEARS GS 3100 X 18 5 HELMUT LOTZE PRESS BRAKE 309 X 3000 KN 6 RADIAL DRILLING MACHINE WAGNER PRC 60 7 ELB FLAT SANDER SWB 010 VAII OF 8 HECKERT THROWER FU 315/E OF 9 NARDINI ND 220AE OF 10 NARDINI SZ 250 T 11 2 X &ATILDE;&CURREN;TERE MILLING 12 BAND SAW AMA SMALL 13 WELDING EQUIPMENT
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 5.290 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 1300 x 1530 x 2900 mm<br/>description: - pressing force: 50 t<br> - working lenght: 1000 mm<br> - hydraulic tool clamping<br> - serial number: 013991001 WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 1300 X 1530 X 2900 MM
DESCRIPTION: - PRESSING FORCE: 50 T
- WORKING LENGHT: 1000 MM
- HYDRAULIC TOOL CLAMPING
- SERIAL NUMBER: 013991001
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 80.000 €
Ubicación: Land-cnc press brake hydraulic sadowski
manufacturer: sadowski
type: hap 200 x 3600kn length: 3010 mm
pressing force: 200 t
machine dimensions (lxwxh): 4300 mm x 2000 mm x 3200 mm

complete engine package consisting of:

1 band saw amada hd 800 2. mechanical grinder lima 400 l 3 sadowski press brake hap 200 x 3600kn
4. darley table shears gs 3100 x 18 5 helmut lotze press brake 309 x 3000 kn 6 radial drilling machine wagner prc 60 7 elb flat sander swb 010 vaii of 8 heckert thrower fu 315/e of 9 nardini nd 220ae of 10 nardini sz 250 t 11 2 x ã¤tere milling 12 band saw ama small
13 welding equipment
 CNC PRESS BRAKE HYDRAULIC SADOWSKI MANUFACTURER: SADOWSKI TYPE: HAP 200 X 3600KN LENGTH: 3010 MM PRESSING FORCE: 200 T MACHINE DIMENSIONS (LXWXH): 4300 MM X 2000 MM X 3200 MM COMPLETE ENGINE PACKAGE CONSISTING OF: 1 BAND SAW AMADA HD 800 2. MECHANICAL GRINDER LIMA 400 L 3 SADOWSKI PRESS BRAKE HAP 200 X 3600KN 4. DARLEY TABLE SHEARS GS 3100 X 18 5 HELMUT LOTZE PRESS BRAKE 309 X 3000 KN 6 RADIAL DRILLING MACHINE WAGNER PRC 60 7 ELB FLAT SANDER SWB 010 VAII OF 8 HECKERT THROWER FU 315/E OF 9 NARDINI ND 220AE OF 10 NARDINI SZ 250 T 11 2 X &ATILDE;&CURREN;TERE MILLING 12 BAND SAW AMA SMALL 13 WELDING EQUIPMENT
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Precio: 340 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: helmut lotze sheet metal technology
year of construction: 1995
type: 309 x 3000kn
cnc control: siemens td 390
working length: 3000 mm
pressing force: 300 t
machine dimensions (lxwxh): 4300 mm x 2000 mm x 3450 mm
 MANUFACTURER: HELMUT LOTZE SHEET METAL TECHNOLOGY YEAR OF CONSTRUCTION: 1995 TYPE: 309 X 3000KN CNC CONTROL: SIEMENS TD 390 WORKING LENGTH: 3000 MM PRESSING FORCE: 300 T MACHINE DIMENSIONS (LXWXH): 4300 MM X 2000 MM X 3450 MM
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: heesemann, type: profilklotzeinschleifgerät pwst, bauyeshr : 1994, control: hand, sanding belt hight: 80, tischlänge mm : 800, work piece hight min - max mm: 80, control panel on top: yes, radius sanding device: yes, profilwerkzeug-formschleifmaschine pws-t <crlf>für das massgenaue schleifen der konturen vorgearbeiteter<crlf>profilwerkzeuge, bestehend aus<crlf>über getriebemotor oszillierend,<crlf>profilwerkzeuge auf kreissegment schwenkbar gelagert.<crlf>, year :1994 MANUFACTURER: HEESEMANN, TYPE: PROFILKLOTZEINSCHLEIFGERäT PWST, BAUYESHR : 1994, CONTROL: HAND, SANDING BELT HIGHT: 80, TISCHLäNGE MM : 800, WORK PIECE HIGHT MIN - MAX MM: 80, CONTROL PANEL ON TOP: YES, RADIUS SANDING DEVICE: YES, PROFILWERKZEUG-FORMSCHLEIFMASCHINE PWS-T <CRLF>FüR DAS MASSGENAUE SCHLEIFEN DER KONTUREN VORGEARBEITETER<CRLF>PROFILWERKZEUGE, BESTEHEND AUS<CRLF>üBER GETRIEBEMOTOR OSZILLIEREND,<CRLF>PROFILWERKZEUGE AUF KREISSEGMENT SCHWENKBAR GELAGERT.<CRLF>, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	
	-maximum working width 1040 mm
	-maximum thickness of material st 37 approx.				   2.5 mm - bending angle by end-point - projection of the upper cheek tool front 150 mm
-maximum lifting height of the upper beam 240 mm
	-adjustability of the bending flange 40 mm
-e. - footswitch
	-upper cheek drive 400 v / 2,2 kw
	-bending beam drive 400 v / 3,0 kw
	-space requirement approx.	                 b h 2500 x 1450 x h 1100 mm
	-weight approx.							2700 kg
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 1040 MM -MAXIMUM THICKNESS OF MATERIAL ST 37 APPROX. 2.5 MM - BENDING ANGLE BY END-POINT - PROJECTION OF THE UPPER CHEEK TOOL FRONT 150 MM -MAXIMUM LIFTING HEIGHT OF THE UPPER BEAM 240 MM -ADJUSTABILITY OF THE BENDING FLANGE 40 MM -E. - FOOTSWITCH -UPPER CHEEK DRIVE 400 V / 2,2 KW -BENDING BEAM DRIVE 400 V / 3,0 KW -SPACE REQUIREMENT APPROX. B H 2500 X 1450 X H 1100 MM -WEIGHT APPROX. 2700 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-pressure: 4000 kn<br/>chamfer lenght: 6000 mm<br/>distance between columns: 5500 mm<br/>control: dnc 884 ps/b <br/>stroke: 150 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 25 t<br/>dimensions of the machine ca.: 7,0x2,5x3,5 m<br/>the machine can be used in tandem with no. 1075-6837, and has<br/>a cutting length of about 14.5 m<br/><br/>arm length of the holding device: 1200 mm<br/>press table height: 830 mm<br/>operation: two-hand console<br/><br/>2014 conversion of the control to dnc 884 ps / b with rotary encoder and linear <br/>encoder<br/>as a measuring system<br/>2014 inspection of the mechanical parts and replacement of the defective parts<br/><br/>the machine was mainly driven in single-shift operation and has steel plates<br/>bent to 5 mm.<br/>machine is equipped with a central lubrication.<br/><br/><br/><br/><br/> PRESSURE: 4000 KN
CHAMFER LENGHT: 6000 MM
DISTANCE BETWEEN COLUMNS: 5500 MM
CONTROL: DNC 884 PS/B
STROKE: 150 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 25 T
DIMENSIONS OF THE MACHINE CA.: 7,0X2,5X3,5 M
THE MACHINE CAN BE USED IN TANDEM WITH NO. 1075-6837, AND HAS
A CUTTING LENGTH OF ABOUT 14.5 M

ARM LENGTH OF THE HOLDING DEVICE: 1200 MM
PRESS TABLE HEIGHT: 830 MM
OPERATION: TWO-HAND CONSOLE

2014 CONVERSION OF THE CONTROL TO DNC 884 PS / B WITH ROTARY ENCODER AND LINEAR
ENCODER
AS A MEASURING SYSTEM
2014 INSPECTION OF THE MECHANICAL PARTS AND REPLACEMENT OF THE DEFECTIVE PARTS

THE MACHINE WAS MAINLY DRIVEN IN SINGLE-SHIFT OPERATION AND HAS STEEL PLATES
BENT TO 5 MM.
MACHINE IS EQUIPPED WITH A CENTRAL LUBRICATION.




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-ref.nr. 00522
designation of the plant press brake producer helmut lotze model 323.4100 built 06/1997
hours of operation 3 ply control robosoft gone, hl 345 graph
pressing force of 200 to
kant length 4.10 m mass between the studs 3.50 m hole in the c frame 500 mm
height 650 mm
stroke 300mm
r axis 200mm
stop in x 1000mm
stop fingers 4 x manually adjustable
last review 11/2017
	
with many tools many upper and sub-tools or assistants
incl. pneumatic romanipublished tool (4, 0 m) incl. tool cabinet, upper tools system amada, 2 compl. rates blockmatritzen 4-sided usable (4.0) tools worth nearly 20,000 euro are sold
tax base closing date for state	
 REF.NR. 00522 DESIGNATION OF THE PLANT PRESS BRAKE PRODUCER HELMUT LOTZE MODEL 323.4100 BUILT 06/1997 HOURS OF OPERATION 3 PLY CONTROL ROBOSOFT GONE, HL 345 GRAPH PRESSING FORCE OF 200 TO KANT LENGTH 4.10 M MASS BETWEEN THE STUDS 3.50 M HOLE IN THE C FRAME 500 MM HEIGHT 650 MM STROKE 300MM R AXIS 200MM STOP IN X 1000MM STOP FINGERS 4 X MANUALLY ADJUSTABLE LAST REVIEW 11/2017 WITH MANY TOOLS MANY UPPER AND SUB-TOOLS OR ASSISTANTS INCL. PNEUMATIC ROMANIPUBLISHED TOOL (4, 0 M) INCL. TOOL CABINET, UPPER TOOLS SYSTEM AMADA, 2 COMPL. RATES BLOCKMATRITZEN 4-SIDED USABLE (4.0) TOOLS WORTH NEARLY 20,000 EURO ARE SOLD TAX BASE CLOSING DATE FOR STATE
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-pressure: 4000 kn<br/>chamfer lenght: 7500 mm<br/>distance between columns: 7000 mm<br/>control: dnc 884 ps/b <br/>stroke: 150 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 28 t<br/>dimensions of the machine ca.: 8,5x2,5x3,5 m<br/>the machine can be used in tandem with no. 1075-6838, and has<br/>a cutting length of about 14.5 m<br/><br/>arm length of the holding device: 1200 mm<br/>press table height: 830 mm<br/>operation: two-hand console<br/><br/>2014 conversion of the control to dnc 884 ps / b with rotary encoder and linear <br/>encoder<br/>as a measuring system<br/>2014 inspection of the mechanical parts and replacement of the defective parts<br/><br/>the machine was mainly driven in single-shift operation and has steel plates<br/>bent to 5 mm.<br/>machine is equipped with a central lubrication.<br/><br/><br/><br/><br/> PRESSURE: 4000 KN
CHAMFER LENGHT: 7500 MM
DISTANCE BETWEEN COLUMNS: 7000 MM
CONTROL: DNC 884 PS/B
STROKE: 150 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 28 T
DIMENSIONS OF THE MACHINE CA.: 8,5X2,5X3,5 M
THE MACHINE CAN BE USED IN TANDEM WITH NO. 1075-6838, AND HAS
A CUTTING LENGTH OF ABOUT 14.5 M

ARM LENGTH OF THE HOLDING DEVICE: 1200 MM
PRESS TABLE HEIGHT: 830 MM
OPERATION: TWO-HAND CONSOLE

2014 CONVERSION OF THE CONTROL TO DNC 884 PS / B WITH ROTARY ENCODER AND LINEAR
ENCODER
AS A MEASURING SYSTEM
2014 INSPECTION OF THE MECHANICAL PARTS AND REPLACEMENT OF THE DEFECTIVE PARTS

THE MACHINE WAS MAINLY DRIVEN IN SINGLE-SHIFT OPERATION AND HAS STEEL PLATES
BENT TO 5 MM.
MACHINE IS EQUIPPED WITH A CENTRAL LUBRICATION.




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	
	-maximum working width 2540 mm
	-maximum thickness of material st 37 2 mm - preselected bending angle 0-135 â°
-maximum lifting height of the upper beam 240 mm
	-adjustability of the bending flange 40 mm
	-upper cheek drive 400 v / 2,0 kw
	-bending beam drive 400 v / 3,0 kw
	-space requirement approx.	               b h 3850 x 1450 x h 1100 mm
	-weight approx.						2500 kg
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 2540 MM -MAXIMUM THICKNESS OF MATERIAL ST 37 2 MM - PRESELECTED BENDING ANGLE 0-135 &ACIRC;&DEG; -MAXIMUM LIFTING HEIGHT OF THE UPPER BEAM 240 MM -ADJUSTABILITY OF THE BENDING FLANGE 40 MM -UPPER CHEEK DRIVE 400 V / 2,0 KW -BENDING BEAM DRIVE 400 V / 3,0 KW -SPACE REQUIREMENT APPROX. B H 3850 X 1450 X H 1100 MM -WEIGHT APPROX. 2500 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet width: 2500 mm<br/>plate thickness: 12 mm<br/>no. of strokes: 16 hub/min<br/>stroke: 107 mm<br/>total power requirement: 15 kw<br/><br/><br/><br/><br/> SHEET WIDTH: 2500 MM
PLATE THICKNESS: 12 MM
NO. OF STROKES: 16 HUB/MIN
STROKE: 107 MM
TOTAL POWER REQUIREMENT: 15 KW




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-max. working width: 3000mm, max. sheet thickness: 4mm, controls defective.  MAX. WORKING WIDTH: 3000MM, MAX. SHEET THICKNESS: 4MM, CONTROLS DEFECTIVE.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure: 200 t<br/>chamfer lenght: 5000 mm<br/>distance between columns: 4000 mm<br/>control: cybelec serie 8000 <br/>feed down: 75 mm/sec<br/>feed up: 42 mm/sec<br/>feed under pressure: 7,9 mm/sec<br/>stroke: 150 mm<br/>total power requirement: 18 kw<br/>weight of the machine ca.: 21 t<br/>electric welded all-steel design<br/>hydraulic drive via two pressure cylinders<br/>opening width between table and pressure bar max .: 540 mm<br/>central lubrication<br/>controlled axes<br/>press depth and backgauge<br/>overhauled 2003<br/>modernized control<br/>general overhaul of cylinders (seals and chrome plating)<br/><br/><br/><br/><br/> PRESSURE: 200 T
CHAMFER LENGHT: 5000 MM
DISTANCE BETWEEN COLUMNS: 4000 MM
CONTROL: CYBELEC SERIE 8000
FEED DOWN: 75 MM/SEC
FEED UP: 42 MM/SEC
FEED UNDER PRESSURE: 7,9 MM/SEC
STROKE: 150 MM
TOTAL POWER REQUIREMENT: 18 KW
WEIGHT OF THE MACHINE CA.: 21 T
ELECTRIC WELDED ALL-STEEL DESIGN
HYDRAULIC DRIVE VIA TWO PRESSURE CYLINDERS
OPENING WIDTH BETWEEN TABLE AND PRESSURE BAR MAX .: 540 MM
CENTRAL LUBRICATION
CONTROLLED AXES
PRESS DEPTH AND BACKGAUGE
OVERHAULED 2003
MODERNIZED CONTROL
GENERAL OVERHAUL OF CYLINDERS (SEALS AND CHROME PLATING)




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Precio: 4.400 €
Ubicación: Land-maximum cutting length: 2540 mm<br/>  <br/>  maximum cutting thickness: 5.5 mm steel<br/>  <br/>  back gauge up to 750 mm easily broken<br/>  <br/>  engine loses oil<br/>  <br/>  side stop<br/>  <br/>  weight: 4800 kg MAXIMUM CUTTING LENGTH: 2540 MM

MAXIMUM CUTTING THICKNESS: 5.5 MM STEEL

BACK GAUGE UP TO 750 MM EASILY BROKEN

ENGINE LOSES OIL

SIDE STOP

WEIGHT: 4800 KG
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 3540 mm<br/>plate thickness: 9 mm<br/>distance between columns: 3540 mm<br/>rear stop: 1250 mm<br/>motorica backgauge in extended performence: 1250 mm<br/>ball roller in the table<br/>angle stop<br/>support arms<br/>cutting angle adjustment<br/>gap adjustment<br/><br/><br/><br/><br/> SHEET WIDTH: 3540 MM
PLATE THICKNESS: 9 MM
DISTANCE BETWEEN COLUMNS: 3540 MM
REAR STOP: 1250 MM
MOTORICA BACKGAUGE IN EXTENDED PERFORMENCE: 1250 MM
BALL ROLLER IN THE TABLE
ANGLE STOP
SUPPORT ARMS
CUTTING ANGLE ADJUSTMENT
GAP ADJUSTMENT




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-metal sheet thickness: 6.5mm, bending length: 1500mm, tensioning spindel opening: 1595mm, opening width: 400mm, bending capacity: 135°, stop adjustment: 60-1000mm.  METAL SHEET THICKNESS: 6.5MM, BENDING LENGTH: 1500MM, TENSIONING SPINDEL OPENING: 1595MM, OPENING WIDTH: 400MM, BENDING CAPACITY: 135°, STOP ADJUSTMENT: 60-1000MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pressure: 200 t<br/>chamfer lenght: 4100 mm<br/>distance between columns: 3050 mm<br/>stroke: 0-100 mm<br/>dayligth: 500 mm<br/>engine output: 15 kw<br/>column arm: 250 mm<br/>dimensions (lxwxh): 4,05x1,65x3,3 m<br/>weight: 17 t<br/>with toolings complete<br/><br/><br/><br/><br/> PRESSURE: 200 T
CHAMFER LENGHT: 4100 MM
DISTANCE BETWEEN COLUMNS: 3050 MM
STROKE: 0-100 MM
DAYLIGTH: 500 MM
ENGINE OUTPUT: 15 KW
COLUMN ARM: 250 MM
DIMENSIONS (LXWXH): 4,05X1,65X3,3 M
WEIGHT: 17 T
WITH TOOLINGS COMPLETE




Vendedor: Gromag AG
Año de construcción: usado
Precio: 8.200 €
Ubicación: Land-maximum cutting length: 3040 mm<br/>  <br/>  maximum cutting thickness: 5 mm steel<br/>  <br/>  manual back gauge<br/>  <br/>  side stop<br/>  <br/>  weight: 5000 kg MAXIMUM CUTTING LENGTH: 3040 MM

MAXIMUM CUTTING THICKNESS: 5 MM STEEL

MANUAL BACK GAUGE

SIDE STOP

WEIGHT: 5000 KG
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 7.900 €
Ubicación: Land-sheet width: 4040 mm<br/>plate thickness: 4 mm<br/>distance between columns: 4040 mm<br/>back stop - adjustable: 1000 mm<br/>no. of strokes: 19 hub/min<br/>total power requirement: 15 kw<br/>weight of the machine ca.: 8,6 t<br/>dimensions of the machine ca.: 5,8 x 2,2 x 1,9 m<br/>rear stop can be oiperated electrically<br/>accessories: <br/>angle stop<br/>digital readout<br/><br/><br/><br/><br/> SHEET WIDTH: 4040 MM
PLATE THICKNESS: 4 MM
DISTANCE BETWEEN COLUMNS: 4040 MM
BACK STOP - ADJUSTABLE: 1000 MM
NO. OF STROKES: 19 HUB/MIN
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 8,6 T
DIMENSIONS OF THE MACHINE CA.: 5,8 X 2,2 X 1,9 M
REAR STOP CAN BE OIPERATED ELECTRICALLY
ACCESSORIES:
ANGLE STOP
DIGITAL READOUT




Vendedor: Gromag AG
Año de construcción: usado
Ubicación: Land-gr. cutting length: 2540 mm
gr. thickness: 14 mm
back gauge: up to 1000 mm
total power: 30 kw / 380 volt
machine weight: 11000 kg

equipment / accessories:

electrically adjustable back gauge up to 1000 mm
2 spare blades
rip fence
sheet support arms
foot switch

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the shear before making a purchase in our factory under power.
 GR. CUTTING LENGTH: 2540 MM GR. THICKNESS: 14 MM BACK GAUGE: UP TO 1000 MM TOTAL POWER: 30 KW / 380 VOLT MACHINE WEIGHT: 11000 KG EQUIPMENT / ACCESSORIES: ELECTRICALLY ADJUSTABLE BACK GAUGE UP TO 1000 MM 2 SPARE BLADES RIP FENCE SHEET SUPPORT ARMS FOOT SWITCH ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE SHEAR BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-sheet width: 3000 mm<br/>plate thickness: 3 mm<br/>no. of strokes: 28-115 p. min.<br/>fence distance: 1000 mm<br/>total power requirement: 8,6 kw<br/>weight of the machine ca.: 4,2 t<br/>dimensions of the machine ca.: 3,8 x 2 x 1,65 m<br/>condition: ready for operation:  <br/>electric 380 volt:  <br/>foot switch:  <br/>cutting lenght bound:  <br/>depth back gauge in the front adjustable:  <br/>with hand wheel with scale: 1000 mm<br/>support arms:  <br/>squaring arm:  <br/>machine dealer with own stock of 2500 m² and certification of the database<br/>machineseeker.<br/><br/><br/><br/><br/> SHEET WIDTH: 3000 MM
PLATE THICKNESS: 3 MM
NO. OF STROKES: 28-115 P. MIN.
FENCE DISTANCE: 1000 MM
TOTAL POWER REQUIREMENT: 8,6 KW
WEIGHT OF THE MACHINE CA.: 4,2 T
DIMENSIONS OF THE MACHINE CA.: 3,8 X 2 X 1,65 M
CONDITION: READY FOR OPERATION:
ELECTRIC 380 VOLT:
FOOT SWITCH:
CUTTING LENGHT BOUND:
DEPTH BACK GAUGE IN THE FRONT ADJUSTABLE:
WITH HAND WHEEL WITH SCALE: 1000 MM
SUPPORT ARMS:
SQUARING ARM:
MACHINE DEALER WITH OWN STOCK OF 2500 M² AND CERTIFICATION OF THE DATABASE
MACHINESEEKER.




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-working width: 3000 mm, thickness: 8 mm projection: 120 mm rear gauge: 1000 mm power: 380 v, 17 kw space: 4050 x 2100 x 1800 mm weight: 7800 kg 
 WORKING WIDTH: 3000 MM, THICKNESS: 8 MM PROJECTION: 120 MM REAR GAUGE: 1000 MM POWER: 380 V, 17 KW SPACE: 4050 X 2100 X 1800 MM WEIGHT: 7800 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pressure: 300 t<br/>chamfer lenght: 3050 mm<br/>distance between columns: . mm<br/>control: cybeleg <br/>type: dnc880s <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> PRESSURE: 300 T
CHAMFER LENGHT: 3050 MM
DISTANCE BETWEEN COLUMNS: . MM
CONTROL: CYBELEG
TYPE: DNC880S
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-working width: 5050 mm thickness: 10 mm power: 30 kw space: 2450 x 5600 x 2500 mm weight: 28000 kg 
 WORKING WIDTH: 5050 MM THICKNESS: 10 MM POWER: 30 KW SPACE: 2450 X 5600 X 2500 MM WEIGHT: 28000 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 4000 mm<br/>plate thickness: 4,00 mm<br/>weight of the machine ca.: 9 t<br/>dimensions of the machine ca.:  5,00 x 3,40 x 2,10 m<br/>- angle stop<br/>- conveyor belt with holding function<br/>- motorized backstop<br/><br/><br/><br/><br/> SHEET WIDTH: 4000 MM
PLATE THICKNESS: 4,00 MM
WEIGHT OF THE MACHINE CA.: 9 T
DIMENSIONS OF THE MACHINE CA.: 5,00 X 3,40 X 2,10 M
- ANGLE STOP
- CONVEYOR BELT WITH HOLDING FUNCTION
- MOTORIZED BACKSTOP




Vendedor: Frech GmbH
Año de construcción: usado
Ubicación: Land-working width: 2500 mm sheet thickness: 4 mm throat depth: 70 mm rear gauge: 520 mm power: 380 v, 6.3 kw space: 3200 x 2300 x 1270 mm weight: 4600 kg 
 WORKING WIDTH: 2500 MM SHEET THICKNESS: 4 MM THROAT DEPTH: 70 MM REAR GAUGE: 520 MM POWER: 380 V, 6.3 KW SPACE: 3200 X 2300 X 1270 MM WEIGHT: 4600 KG
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pressure: 100 t<br/>chamfer lenght: 3500 mm<br/>distance between columns: 2750 mm<br/>passage width: 2600 mm<br/>throat: 250 mm<br/>stroke: 0 - 146 mm<br/>dayligth: 400 mm<br/>table vertical adjustable: 70 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 10,2 t<br/>dimensions: 3,5 x 1,9 x 2,62 m<br/>acc.: upper and lower dies, back gauge<br/><br/><br/><br/><br/> PRESSURE: 100 T
CHAMFER LENGHT: 3500 MM
DISTANCE BETWEEN COLUMNS: 2750 MM
PASSAGE WIDTH: 2600 MM
THROAT: 250 MM
STROKE: 0 - 146 MM
DAYLIGTH: 400 MM
TABLE VERTICAL ADJUSTABLE: 70 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 10,2 T
DIMENSIONS: 3,5 X 1,9 X 2,62 M
ACC.: UPPER AND LOWER DIES, BACK GAUGE




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-article number: ma603
manufacturer: lotze
type: unknown
year of construction: approx. 1965
bending length [mm]: 2000
length [mm]: 3400
width [mm]: 1500
height [mm]: 1500
weight [kg]: ca. 4500
power supply: 380 v
usable height [mm]: 300
maximum sheet thickness [mm]: 5
operating modes:
semi automatic
vollautomatik
accessories:
rod d 10 mm
rod d 20 mm
electric new ARTICLE NUMBER: MA603 MANUFACTURER: LOTZE TYPE: UNKNOWN YEAR OF CONSTRUCTION: APPROX. 1965 BENDING LENGTH [MM]: 2000 LENGTH [MM]: 3400 WIDTH [MM]: 1500 HEIGHT [MM]: 1500 WEIGHT [KG]: CA. 4500 POWER SUPPLY: 380 V USABLE HEIGHT [MM]: 300 MAXIMUM SHEET THICKNESS [MM]: 5 OPERATING MODES: SEMI AUTOMATIC VOLLAUTOMATIK ACCESSORIES: ROD D 10 MM ROD D 20 MM ELECTRIC NEW
Vendedor: Ulrich Müller Maschinenhandel
Año de construcción: usado
Ubicación: Land-sheet width: 4040 mm<br/>plate thickness: 5 mm<br/>machine no.: 2524003 <br/><br/><br/><br/><br/> SHEET WIDTH: 4040 MM
PLATE THICKNESS: 5 MM
MACHINE NO.: 2524003




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-plate shear lotze kssy 30/8
-machine height ca. 1500 mm
-length of the machine ca. 3200 mm
-total width of the machine ca. 2200 mm
-weight approx. 8000kg
-the machine's width 2200mm
-length 3000 mm
-price must be replaced on request by the shear part of the hydraulic system with a little effort.

contact mr. müller (changes and errors in the technical data, information
and prices and subject to prior sale!)  PLATE SHEAR LOTZE KSSY 30/8 -MACHINE HEIGHT CA. 1500 MM -LENGTH OF THE MACHINE CA. 3200 MM -TOTAL WIDTH OF THE MACHINE CA. 2200 MM -WEIGHT APPROX. 8000KG -THE MACHINE'S WIDTH 2200MM -LENGTH 3000 MM -PRICE MUST BE REPLACED ON REQUEST BY THE SHEAR PART OF THE HYDRAULIC SYSTEM WITH A LITTLE EFFORT. CONTACT MR. M&UUML;LLER (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 5000 mm<br/>distance between columns: 4540 mm<br/>control: cybelec dnc 7000 <br/>column arm: 200 mm<br/>table width: 220 mm<br/>table height: 900 mm<br/>work stroke: 150 mm<br/>daylight opening: 490 mm<br/>feed down: 100 mm/sec<br/>: 7,5 mm/sec<br/>feed up: 68 mm/sec<br/>total power requirement: 12,5 kw<br/>weight of the machine ca.: 16.500 kg<br/>dimensions of the machine ca.:  m<br/>accessories / equipment:<br/><br/>- controlled axes: y1 - y2 - x<br/>- hydraulic upper tool clamping<br/><br/>youtube video link:<br/>https://youtu.be/w9d_oywujpu<br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 5000 MM
DISTANCE BETWEEN COLUMNS: 4540 MM
CONTROL: CYBELEC DNC 7000
COLUMN ARM: 200 MM
TABLE WIDTH: 220 MM
TABLE HEIGHT: 900 MM
WORK STROKE: 150 MM
DAYLIGHT OPENING: 490 MM
FEED DOWN: 100 MM/SEC
: 7,5 MM/SEC
FEED UP: 68 MM/SEC
TOTAL POWER REQUIREMENT: 12,5 KW
WEIGHT OF THE MACHINE CA.: 16.500 KG
DIMENSIONS OF THE MACHINE CA.: M
ACCESSORIES / EQUIPMENT:

- CONTROLLED AXES: Y1 - Y2 - X
- HYDRAULIC UPPER TOOL CLAMPING

YOUTUBE VIDEO LINK:
HTTPS://YOUTU.BE/W9D_OYWUJPU




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-press brake lotze pw 120-30
-tonnage 120 t.
-clearance between the page stands: 2500 mm
-machine height 3000 mm
-machine length 3200 mm
-length 3000 mm
-machine width 1500 mm
-weight 9000 kg
-price on request

contact mr. müller (changes and errors in the technical data, information
and prices and subject to prior sale!)
	 
  	  	  PRESS BRAKE LOTZE PW 120-30 -TONNAGE 120 T. -CLEARANCE BETWEEN THE PAGE STANDS: 2500 MM -MACHINE HEIGHT 3000 MM -MACHINE LENGTH 3200 MM -LENGTH 3000 MM -MACHINE WIDTH 1500 MM -WEIGHT 9000 KG -PRICE ON REQUEST CONTACT MR. M&UUML;LLER (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 6,5 mm st<br/>daylight opening: 280 mm<br/>bending speed: 5,0 mm/min<br/>engine output: 3,0 / 4,8 kw<br/>work height max.: 800 mm<br/>weight of the machine ca.: 8,0 t<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 6,5 MM ST
DAYLIGHT OPENING: 280 MM
BENDING SPEED: 5,0 MM/MIN
ENGINE OUTPUT: 3,0 / 4,8 KW
WORK HEIGHT MAX.: 800 MM
WEIGHT OF THE MACHINE CA.: 8,0 T




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 46325 Borken-Burlo
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-2 axes controlled 2 AXES CONTROLLED
Vendedor: APT International
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more LOTZE types: