185 ofertas

Año de construcción: 1994
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Pressing force: 170t, connected load: 14kW, weight: 9.5t. more

Año de construcción: usado
Ubicación: Land-de DE 71706 Markgröningen, Wilhelm-Haas-Str. 7
Vendedor: Batrekhy Engineering Services

Hydr. Shear EHT-LVD HST_C 31/6 Typ : HST 31/6 cutting length : 3050 mm cutting thicknis :6 mm Machine Nr.: 27064 Year : 2000 Transport, LxWxH: 4100x2000x2000 mm Weight : 5500 kg Electrical Back gauge: 1000 mm blade gap adjustment Plate holding device more

Año de construcción: 2004
Ubicación: ab Standort
Vendedor: Frech GmbH

sheet width: 3100 mm plate thickness: 6,00 mm distance between columns: mm total power requirement: 9,5 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 3,60 x 2,30 x 2,10 m Equipment: - Angle stop - Cutting angle adjustment - Cutting gap adjustment - Cutting length limit - Controlled back gauge more

Año de construcción: 1987
Ubicación: Land-de DE 71706 Markgröningen, Wilhelm-Haas-Str. 7
Vendedor: Batrekhy Engineering Services

Hydraulic Pressbrake Type: PPEB 80/3050 MNC SN: 13631 Power: 80 Ton Bendinglength: 3050 mm Year: 1987 Control MNC 85000 with 2D Grafik with one set tools more

Año de construcción: 1989
Ubicación: Ahaus
Vendedor: A+B Werkzeug Maschinen Handels GmbH

pressure: 100 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 250 mm stroke: 200 mm oil volume: 200 ltr. total power requirement: 19,0 KW weight of the machine ca.: 6.000 kg. range L-W-H: 3.550x2.100x2.700 mm more

Año de construcción: 1984
Ubicación: 63322 Rödermark, Odenwaldstr. 63
Vendedor: Mieth Maschinenhandel

Technical data: -Max working width 3100 mm - max cutting capacity St 40 6 mm -Angle adjustable mot. 0.5-3 ° -Cut gap adjustment - number of hydraulic hold-down device 17 PCs -Engine rear gauge 10-750 mm -front angle stop -Stroke rate depending on the angle and length 12-45 per/min -Hydraulic drive 400 V / 7.5 kW -Height 860 mm -Space requirement incl. back gauge, support arms approx. B 3950 x H 1800 x H 2200 mm -Weight approx. 4500 kg - with:-E foot switch -Cutting line illumination more

Año de construcción: 2003
Ubicación: Goldenstedt
Vendedor: WeMa A. Pigge GmbH

punching pressure: 16 t plate thickness: 8 mm plate length max.: 1250 mm sheet width - max.: 1000 mm engine output: 13 kW control: Cadman CNC voltage: 400 V weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3600 x 2300 x 2000 m more

Año de construcción: 1997
Ubicación: Salzburg Austria Europe
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

LVD press brake mod PPI 170-40-MNC 10 / BJ. 97 / 4000 x 170 T / light 3150 / stroke 200 / digital MNC 10 / throat depth 400 / 24 kW / full accessories / good condition fe.gi.maschinen.sbg.at LVD press brake mod PPI 170-40-MNC 10 / year 97 / 4000 x 170 t / light 3150 / tappet stroke 200 / digital MNC 10 / projection 400 / 24 kw / full accessories / good condition Fe.gi.Maschinen.SBG.at more

Año de construcción: 1972
Ubicación: 0
Vendedor: Markus Hirsch GmbH

sheet width: 4100 mm plate thickness: 12 mm distance between columns: 4100 mm cutting angle: 1-3 ° down holder: 20 St no. of strokes: 8-32 Hub/min rear stop: 1000 1000 total power requirement: 23 kW weight of the machine ca.: 23 t dimensions of the machine ca.: 5,4x2,5x3,2 m more

Año de construcción: 1978
Ubicación: Land-CZ Czech Republic, 25219 Rudna
Vendedor: CEE-Machines

The machine is in good technical condition, by prior arrangement, the opportunity to test. more

Año de construcción: usado
Ubicación: 0
Vendedor: Markus Hirsch GmbH

sheet width: 2540 mm plate thickness: 12 mm roll diameter: 260 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 1989
Precio: 12.500 
Ubicación: Land-pl Poland, 58-20 Dzierzoniów
Vendedor: ARTE FERRUM

100ton x 3000 mm, 1989 ', manual settings, 250 mm recess more

Año de construcción: 1970
Ubicación: Willich
Vendedor: Markus Hirsch GmbH

sheet width: 2500 mm plate thickness: 12 mm distance between columns: 2550 mm true cutting angle adjustable: cutting gap adjustment: fence: total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2,8x2x2 m more

Año de construcción: usado
Ubicación: 63322 Rödermark
Vendedor: Mieth Maschinenhandel

Technical data: -Pressure capacity 200 t -Working width 3050 mm -Clearance between the stands 2550 mm -Table width 180 mm -Throat depth 250 mm -Height 400 mm -Delivery speed 80 mm / sec. -Work speed 6.7 mm / sec. -Retraction speed 67 mm / sec. -Piston stroke 150 mm -Adjustment range fixed stops 120 mm -Drive 400 V 14.5 kW -Space requirement approx. B 3800 x H 2980 x D 1700 mm -Weight approx. 11500 kg -with: - back gauge with 2 stop finger - pointed tool - 4-way universal die - two hand control console, footswitch, more

Año de construcción: 2002
Ubicación: Düsseldorf Halle 2
Vendedor: WALTER KAMES GMBH

sheet width: 2500 mm plate thickness: 6 mm distance between columns: 2600 mm no. of downholder: 14 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 2008
Ubicación: Land-no NO
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: LVD Model: PPEB-8 80/3050 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2008 Production hours: 25000 Location: Norway Country of origin: Belgium GENERAL DATA: Machine weight: 6750 kg MAIN DRIVE: Pressing force: 800 kN Bending length: 2500 mm Crowning available: CNC Crowning Daylight: 240 mm CONTROL UNIT: Brand: DELEM Release: LVD CADMAN MEDIA: Main electronic connection: 400 V Power consumption: 12.5 kVA ADDITIONAL EQUIPMENT: 1 - ABB Robot more

Año de construcción: 1989
Ubicación: Heilbronn
Vendedor: Gustav Schönberger GmbH

pressure: 65 t chamfer lenght: 3000 mm distance between columns: 2550 mm weight of the machine ca.: 4,9 t Hinteranschlag Abkantwerkzeuge limit stop tools Technische Daten / technical details: Druck / pressure 65 to Abkantlänge / max. working length 3000 mm Durchg. zw. den Ständern / distance between the columns 2550 mm Biegehub / stroke 100 mm Ausladung / overhang 200 mm Abstand zwischen Tisch-Stößel / distance between table - ram 300 mm Anriebsleistung / drive capacity 4 kW Gewicht ca. / weight ca. 4900 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. more

Año de construcción: 2004
Ubicación: Land-no NO
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: LVD Model: Axel 3015 L Application type: Laser Cutting Machine type: Laser Cutting Machine Availability: Immediately Construction year: 2004 Production hours: 35000 Location: Norway Origin country: Germany GENERAL DATA: Measurements width: 7400 mm Measurements depth: 11000 mm Measurements height: 4000 mm Machine weight: 33250 kg MAIN DRIVE: Laser brand: FANUC LASER C4000 Laser power: 4 kW Laser type: CO2 CONTROL UNIT: Brand: GE FANUC Model: Series 160i-L MOVEMENT: X-AXIS: Movement: 3000 mm Y-AXIS: Movement: 1500 mm MACHINE SPECIFIC DATA: Number of cutting heads: 1 Size of cutting head 1: 7.5" MAX MATERIAL THICKNESS: Steel: 18 mm ... more

Año de construcción: 1990
Ubicación: Belgien
Vendedor: Knops Werkzeugmaschinen

pressure: 200 t chamfer lenght: 5000 mm distance between columns: 4050 mm Control: MNC 85000 stroke: 250 mm number of controlled axis: 7 (Y1+Y2+X+R+Z1+Z2+V) total power requirement: 22 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m hydraulic workpiece clamping: Technical specifications Force 2000kN Working length 5000mm Distance between uprights 4050mm Stroke 250mm Distance table ? ram 500mm Gap 350mm Width table 180mm Approach speed 100mm/s Working speed 10mm/s Return speed 73mm/s weight 21000 kg motor 22kW CNC COMMAND CONTROL MNC 85000 7 axes Y1 ? Y2 X ? R Z1 Z2 V : crowning table Hydraulic clamping of tooling Tooling included : R15.H225.26°5x1017mm V30.H90.30° 5x10 ... more

Año de construcción: 1977
Precio: 2.500 €
Ubicación: Land-pl PL
Vendedor: MASZYNERIA SP. Z O.O.

Hydraulic guillotine shears LVD MV 25/4 built in 1977. Characteristic data: - maximum thickness of cut sheet: 4 mm - maximum sheet width: 2500 mm more

Año de construcción: 1974
Ubicación: Metzingen
Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

pressure: 300 t chamfer lenght: 3500 mm distance between columns: 3150 mm total power requirement: 25 kW weight of the machine ca.: 22 t Pressure, max. 300 to Working width, max. 4,000 mm Working width between columns 3,150 mm Side daylight of each column 250 mm Max. distance between upper and lower tool holder w/o tools 550 mm Adjustment of upper tool holder, motor driven 260 mm Table size approx. 250 - 4,000 mm Table height above floor 1,000 - 1,600 mm Max. stroke 300 mm Stroke, pressing speed 8 - 80 mm/sec Stroke, rapid traverse 80 mm/sec Adjustment range of back guage, approx. 500 mm Pump drive 22 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 22 to Accessori ... more

Año de construcción: 2005
Ubicación: Land-tr TR
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: LVD Model: STRIPPIT Global 30 1525 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 25112 Location: Turkey Origin country: USA CONTROL UNIT: Brand: GE Fanuc Model: Series 180i-PB MOVEMENT: X-AXIS movement: 2576 mm Y-AXIS movement: 1611 mm more

Año de construcción: 1990
Ubicación: Land-DE Germany, 74219 Möckmühl-Züttlingen
Vendedor: EKW Werkzeugmaschinen AG & Co. KG

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: MNC 85 N column arm: 250 mm dayligth: 400 mm pressure ram stroke: 200 mm main drive: 10,5 kW total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m CNC control MNC 85 N Controlled backgauge 1 upper tool (split) - length 3000 mm 1 die V 10 - length 3000 mm (split version) 1 die V 16 - length 2500 mm (split version) 2-hand control panel with foot switch 2 front support arms more

Año de construcción: 2003
Precio: 14.975 €
Ubicación: Land-pl PL
Vendedor: MASZYNERIA SP. Z O.O.

LVD HST-E 31/6 CNC guillotine shears produced in 2003. Technical parameters of the CNC LVD HST-E 31/6 guillotine: - maximum cutting length: 3000 mm - rear bumper position: 5-1000 mm + manual 3.5-1000 mm - cutting on the rear bumper: 800 x 3000 mm - thickness of the material to be cut: steel - 6 mm, aluminum - 6 mm, St37 - 6 mm - power: 9.5 kW - dimensions of the guillotine (length x height x width): 4000 x 1760 x 2730 mm + handles 1120 mm more

Año de construcción: 1990
Ubicación: ab Lager Krefeld
Vendedor: FEYEN Maschinen GmbH

plate width: 3100 mm plate thickness: 6,35 mm distance between columns: 3150 mm voltage: 380 V frequency: 50 Hz power capacity: 7,5 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,0 x 5,5 x 2,2 m ? MNC 8000 control ? inlet with material feeder ? outlet with belt conveyor with scrap gate ? with mechanical section slot adjustment and eletrical adjustment for intersection angle more

Año de construcción: 2000
Precio: 26.250 €
Ubicación: Land-pl PL
Vendedor: MASZYNERIA SP. Z O.O.

The PPBL 200/30 LVD press brake was produced in 2000. The machine allows you to bend elements on the length of 3100 mm with a force of pressure of 200 tons. The control and control cabinet were completely modernized in November 2017 (the warranty is for the work carried out). Earlier modernization was carried out by HARTMANN from Germany. Technical data of the LVD PPBL 200/30 press: - pressure force: 200 tons - bending length: 3100 mm - Working distance: 160 mm - maximum pressure: 300 bar - power consumption: 11 kW - machine weight: 11200 kg - a complete electrical diagram more

Año de construcción: 1980
Ubicación: ab Lager Krefeld
Vendedor: FEYEN Maschinen GmbH

pressure: 65 t chamfer lenght: 2500 mm distance between columns: 2050 mm table width: 140 mm table height: 750 mm total power requirement: 8 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3, x 1,2 x 2,6 m Equipment: ? manual back stop ? upper and lower tools ? 2 manual operation / foot switch more

Año de construcción: 1999
Precio: 52.500 €
Ubicación: Italy
Vendedor: ARTE FERRUM

AXEL 3015 LVD laser Capacity 1500x3000 FANUC CNC control Loading and unloading system H work timer 39000 Radius On 20000 Max capacity Kw 3 Year 10/99 CE The machine is in operation possible test! more

Año de construcción: 1993
Ubicación: D - 77815 Bühl
Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH

sheet width: 1550 mm plate length: 2525 mm plate thickness: 6,4 mm Punching capacity: 200 kN speed of positioning X: 50 m/min speed of positioning Y: 50 m/mih no. of strokes: 200 / 400 Hub/min control: MNC 32000 ATC: 22 Pos total power requirement: 7,5 kW weight of the machine ca.: 21,3 t more

Año de construcción: 1981
Ubicación: Land-DE Germany, 73525 Schwäbisch Gmünd
Vendedor: IDS Trade GmbH

Plate shear LVD MVN 40/6.5 Cutting length 4,050 mm thickness 6 mm more

Año de construcción: 1992
Ubicación: D - 77815 Bühl
Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH

sheet width: 1025 mm plate length: 1275 mm plate thickness: 6,4 mm Punching capacity: 200 kN speed of positioning X: 50 m/min speed of positioning Y: 50 m/min no. of strokes: 220 / 400 Hub/min control: MNC 4000 ATC: 20 Pos. total power requirement: 7,5 kW weight of the machine ca.: 10,5 t more

Año de construcción: 1972
Precio: 8.200 €
Ubicación: Anemonenweg 8, 33335 Gütersloh, Deutschland
Vendedor: Venker Werkzeugmaschinen GmbH

Maximum cutting length: 2540 mm Maximum cutting thickness: 4 mm steel Moto. Back gauge up to 750 mm Side stop Weight: 4000 kg more

Año de construcción: 1987
Ubicación: D - 77815 Bühl
Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH

pressure: 175 t chamfer lenght: 3050 mm distance between columns: 2550 mm control: MNC 85000 stroke of upper beam: 250 mm distance beam - table: max. 500 mm throat: 300 mm table width: 180 mm feed down: 100 mm/sec feed up: 79,8 mm/sec working feed: 12,1 mm/sec tank capacity: 260 l engine output: 22 kW weight of the machine ca.: 14,0 t range L-W-H: 5,30 x 2,02 x 3,55 m acc.: upper and lower dies, rear stop more

Año de construcción: 1998
Ubicación: Land-es ES
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: LVD Model: PPEB 80/25 CAD-CNC Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 1998 Location: Spain Country of origin: Belgium GENERAL DATA: Measurements width: 5000 mm Measurements depth: 2000 mm Measurements height: 3000 mm Machine weight: 6200 kg MAIN DRIVE: Pressing force: 800 kN Bending length: 2600 mm Daylight: 400 mm Throat: 410 mm Main motor power: 12.5 kW MEDIA: Main electronic connection: 400 V more

Año de construcción: 1988
Ubicación: LAGER
Vendedor: BEMA

pressure: 100 t chamfer lenght: mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 2005
Ubicación: Land-pl PL
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: LVD Model: Siena 1225 TK Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 1080 Location: Poland Origin country: Belgium GENERAL DATA: Measurements width: 8500 mm Measurements depth: 6300 mm Measurements height: 2100 mm Machine weight: 11400 kg MAIN DRIVE: Punching force: 200 kN Maximum sheet thickness: 6.4 mm CONTROL UNIT: Brand: Fanuc Model: 18Oi-PB MOVEMENT: X-AXIS movement: 2500 mm Y-AXIS movement: 1250 mm WORKPIECE: Workpiece x: 2500 mm Workpiece y: 1250 mm MAX MATERIAL THICKNESS: Steel: 6.4 mm TOOLS: No. of stations: 27 No. of index: 3 MEDI ... more

Año de construcción: 1994
Precio: used machinery auction RESALE 10.800 €
Ubicación: Land-de DE Germany, 58710 Menden
Vendedor: Surplex GmbH

Weight approx.: 7500 kg pressure: 110 to pressing length: 3050 mm control: MNC 95C Dimensions (l x w x h) approx.: 1 x 1 x 1 mm Description: Factory no. 21.121/18.713.0 hydraulic clamping V-die PP 3160 hydraulic clamping ram PP 3100 analog R-axis monoblock X - axis Z1 - Z2 Axis more

Año de construcción: 2002
Ubicación: Land-pl PL
Vendedor: GINDUMAC GmbH

OVERVIEW: Brand: LVD Model: Delta 1000 EB Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2002 Location: Poland Origin country: Belgium GENERAL DATA: Measurements width: 4895 mm Measurements depth: 4650 mm Measurements height: 2120 mm Machine weight: 13000 kg MAIN DRIVE: Punching force: 200 kN Maximum sheet thickness: 6.4 mm CONTROL UNIT: Brand: LVD Model: NNC 32000 WORKPIECE: Workpiece x: 2050 mm Workpiece y: 1050 mm TOOLS: No. of stations: 20 No. of index: 2 MEDIA: Main electronic connection: 400 V / 50 HZ more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Capacity: 80 t Folding length: 2550 mm CNC Brand: Cadman CNC Model: Touch MAKE   LVD - Belgium TYPE    PPEB EASY FORM YEAR   2010 SPECIFICATIONS Controll   CADMAN TOUCH Pressbrake / Folding / Mech. / Hydr.  Pressbrake Hydraulic / Mechanical   Hydraulic    Bending length   2550 mm Distance between column   2000 mm  Press force   80 Ton Throat   200 mm Stroke   400 mm Die height   400 mm Backgauge stroke X in mm   600 mm Number off controlled axis  8 Axis X1 / Xz / r1 / Y / Z1 / V1 / Z 2 / W1 Power   11 kW D ... more

Año de construcción: 1996
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Max. pressing force: 3200kN, working length: 7215mm, column width: 6100mm, max. ram stroke: 250mm, max. table ram distance: 510mm, swing: 1000mm, table width: 250mm, closing speed: 80mm/s, working speed: 7mm/s, rewind speed: 70mm/s, oil tank capacity: 350l, weight: 36t. more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Capacity: 320 t Folding length: 4500 mm CNC Brand: Cadman Make LVD 4500 x 32 Type PPEB EFL TURBO Year 2005 CADMAN 10 Axis Capacity (metric tons) 320 Ton Folding length (mm) L = 4.500 Down stroke or Up stroke Die height  670 Tandem type Stroke 400 mm EFL Easy form measuring T1 and T2 bending help front sideWila hydraulic top & lower clamp more

Año de construcción: 1999
Ubicación: Land-DE Germany, 86161 Augsburg
Vendedor: rinke + Partner GmbH

LVD Cadman 5 Achsen CNC Bombierung 110 To x 3000 mm ohne Werkzeuge 25 kW Gewicht ca. 10 To more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Capacity: 320 t Folding length: 4000 mm Make LVD 320/4 Type PPEB 320 / 40 with MNC 85000 / C Year 90 er lvd ppeb 320 tons kantbank pressbrake abkantpresse Capacity (metric tons) 320 Folding length (mm) 4000 Down stroke or Up stroke Boven Tandem typeSingel 1 full set tooling more

Año de construcción: 1997
Ubicación: Land-uk UK
Vendedor: CNC Management Ltd

Make: LVD Model: Shape Delta 1000 Year: 1997 Condition: Used Machine type: Other Location of machine: United Kingdom Control: MNC 32000 Weight: 12600kg Machine Details Good working condition LVD Shape Delta 1000 CNC Punching Machine Capacity: 20 tons, Max sheet size: 2000x1000mm (without re-positioning), Number of turret positions: 20 (16 small, 4 large (2 auto index)), Motor: 7.5kw, more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Capacity: 40 t Folding length: 1250 mm CNC Brand: Elgo CNC Model: P 88 P Make LVD 1250 X 40 T Type PPBL - H Year 1996 ELGO P 88 P Capacity (metric tons) 40 T Folding length (mm) L = 1.250 Down stroke or Up stroke B = 1.050 Tandem type TOP more

Año de construcción: 2003
Ubicación: D - Brandenburg
Vendedor: 3p Vertriebsgesellschaft mbH

4up/6up indrum thermal ctp-system Luscher Xpose 75 age 2003 PC controller with Tiff shooter (pre-installed on Dell PowerEdge Server) Highwater Tiff-out Rip (pre-installed on second dell PowerEdge Server) Autofocus system resolution 2400 dpi 32 Thermal laser diodes with 830 nm, each 1 W high precision technology, easy handling long life laser diodes max. plate size: 760 x 760 mm min. plate size: 380 x 250 mm plate thickness: 0,15-0,3 mm min. 10 Micron data transfer: LVD-SCSI imaging speed: 135 mm/minute (depends) measurement: 2406 x 1149 x 1495 mm weight: ~ 900 kg ; good more

Año de construcción: usado
Ubicación: Land-NL Netherlands, 09155 Babberich
Vendedor: Mach4metal

Capacity: 80 t Folding length: 2550 mm CNC Brand: Cadman SPECIFICATIONS Controll  CADMAN Pressbrake / Folding / Mech. / Hydr.Pressbrake   Hydraulic / Mechanical  Hydraulic Bending length   2550 mm Distance between column  2050 mm Press force   80 Ton Throat   400 mm Stroke   200 mm Die height   400 mm Number off controlled axis  7 Power  12.5 kW more

Año de construcción: 1980
Ubicación: A - Oberösterreich
Vendedor: AUER
Año de construcción: usado
Ubicación: Land-be BE
Vendedor: APT International

Plaat afm. : 1270 x 3660 mm (met repositionering)Punching precision 0,1 mm -- Strokes 350/min2 x auto-index -- Max tooldia 114,3 mmTurretspeed 30 rpmSturing Amada metrecs RIC 1000Met manipulator MP 1224 NC -- Load & unloadVeel gereedschappen -- 4000 werkuren more

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)