36 ofertas

Año de construcción: usado
Ubicación: Land-4.5 4.5" WELEX SINGLE MAIN EXTRUDER 30D VENTED. 150 HP DC MOTOR. HYDRAULIC SCREEN CHANGER MAAG 56/ 56 GEAR PUMP 15HP DC STATIC MIXER., WELEX ABA FEEDBLOCK. 2" , 24D WELEX SIDE MOUNTED COEXTRUDER WITH 20 KW DC MOTOR. 900 MM WIDE EDI FLEX LIP SHEET DIE . 1040 MM WIDE WELEX 3 ROLL COOLING/ POLISHING STACK HIGHLY POLISHED CHROME ROLLS 3 ZONE PUMP GROUP 3-ROLLER TAKE-OFF CONVEYOR 2 X RUBBER ROLL TAKE-OFF, WITH SAFETY COVERS FOR THE ROLLS INTERMEDIATE WINDER INLINE ILLIG RDM 70K, AGE 1999, WITH SIEMENS S5 PLC CONTROLS :- THERMOFORMER WITH AUTO-START FACILITY INDRAMAT SERVOMOTOR INDEXING MAX. MATERIAL WIDTH 730 MM MAX. INDEXING LENGTH 300 MM TOP & LOWER HEATERS, TOTAL CONNECTED LOAD TOP & BOTTOM HEATERS 74.2 KW DRIVE MOTOR 6.93 KW AUTO TRANSPORT RAIL SPREADING FOR PP SHEET SAG CONTROL MAX. FORMING AREA 680 X 280 MM PNEUMATIC PLUG ASSIST, MAX. PART HEIGHT 125 MM CONTROL CABINET WITH SIEMENS S5 OPTIMISED (PLC) CONTROLS ELAU B1 TOUCH PAD OPC WITH VDU DISPLAY AUTO LUBRICATION PUMP. INLINE ILLIG BGR53 COUNTER/ STACKER WITH SIEMENS S5 PLC, AGE 1999 INLINE GRINDER
Vendedor: SAMPLAST INC.
Año de construcción: usado
Ubicación: Land-film evaporator (2x) short path distillation, make uic gmbh, type ea150/kd50/kd10, no f403-3443, new 2003, stoomwezen, material stainless steel (1.4571), working pressure -1/10 bar, with condensor, mounted on frame, with switchgear, weight 4000 kg, extra specifications including degasser, vacuümunit and condenserunit, volume 0,031m3, (8x)heatexchanger for heating/cooling/condenser/evaporating, (4x)vacuum rootsblower, make busch, capacity 250-500 nm3/h, (1x)vacuum liquidring, make busch, capacity 108 nm3/h, (6x)feed/discharge gearpump, make maag, capacity 35 ltr/h, (3x)centrifugalpump, make gwk, capacity 1800 ltr/h, (1x )separatortank gas/liquid, make busch/aquamin, including monofluid unit, ss expansiontank 11ltr, make single type 0054/10: electric heater 4,5ltr, make single type 0054/1, power 18kw, 400 volt: cooler : coolingsurface 0,25m2, make viesel, type gak, tubes 0,9ltr, shell 1,45ltr: centrifugal pump, make speck, type ht/cy, 3,3 kw, 400 volt (atex) :film evaporatorsnew arrivalsdistillation > film evaporatorsnew arrivals what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! FILM EVAPORATOR (2X) SHORT PATH DISTILLATION, MAKE UIC GMBH, TYPE EA150/KD50/KD10, NO F403-3443, NEW 2003, STOOMWEZEN, MATERIAL STAINLESS STEEL (1.4571), WORKING PRESSURE -1/10 BAR, WITH CONDENSOR, MOUNTED ON FRAME, WITH SWITCHGEAR, WEIGHT 4000 KG, EXTRA SPECIFICATIONS INCLUDING DEGASSER, VACUüMUNIT AND CONDENSERUNIT, VOLUME 0,031M3, (8X)HEATEXCHANGER FOR HEATING/COOLING/CONDENSER/EVAPORATING, (4X)VACUUM ROOTSBLOWER, MAKE BUSCH, CAPACITY 250-500 NM3/H, (1X)VACUUM LIQUIDRING, MAKE BUSCH, CAPACITY 108 NM3/H, (6X)FEED/DISCHARGE GEARPUMP, MAKE MAAG, CAPACITY 35 LTR/H, (3X)CENTRIFUGALPUMP, MAKE GWK, CAPACITY 1800 LTR/H, (1X )SEPARATORTANK GAS/LIQUID, MAKE BUSCH/AQUAMIN, INCLUDING MONOFLUID UNIT, SS EXPANSIONTANK 11LTR, MAKE SINGLE TYPE 0054/10: ELECTRIC HEATER 4,5LTR, MAKE SINGLE TYPE 0054/1, POWER 18KW, 400 VOLT: COOLER : COOLINGSURFACE 0,25M2, MAKE VIESEL, TYPE GAK, TUBES 0,9LTR, SHELL 1,45LTR: CENTRIFUGAL PUMP, MAKE SPECK, TYPE HT/CY, 3,3 KW, 400 VOLT (ATEX) :FILM EVAPORATORSNEW ARRIVALSDISTILLATION > FILM EVAPORATORSNEW ARRIVALS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-inline welex coextrusion line for pp/ ps with inline illig rdm 70k, age 1990:-

4.5 INLINE WELEX COEXTRUSION LINE FOR PP/ PS WITH INLINE ILLIG RDM 70K, AGE 1990:- 4.5" WELEX SINGLE SCREW MAIN EXTRUDER 30D VENTED. HYDRAULIC SCREEN CHANGER MAAG 56/ 56 GEAR PUMP. STATIC MIXER., WELEX ABA FEEDBLOCK. 50 MM 24D WELEX SIDE MOUNTED COEXTRUDER 900 MM WIDE EDI FLEX LIP SHEET DIE 1040 MM WIDE WELEX 3-ROLL COOLING/ POLISHING STACK 3 ZONE PUMP GROUP 3-ROLLER TAKE-OFF CONVEYOR 2 X RUBBER ROLL TAKE-OFF, WITH SAFETY COVERS FOR THE ROLLS INTERMEDIATE WINDER. INLINE ILLIG RDM 70K, AGE 1990, WITH SCHLEICHER PLC CONTROLS :- INDRAMAT SERVOMOTOR INDEXING MAX. MATERIAL WIDTH 730 MM MAX. INDEXING LENGTH 300 MM TOP & LOWER HEATERS, AUTO TRANSPORT RAIL SPREADING FOR PP SHEET SAG CONTROL MAX. FORMING AREA 680 X 280 MM PNEUMATIC PLUG ASSIST, MAX. PART HEIGHT 125 MM CONTROL CABINET WITH OPTIMISED SCHLEICHER (PLC) CONTROLS AUTO LUBRICATION PUMP. INLINE ILLIG ÜG70B COUNTER/ STACKER, WITH DELIVERY CONVEYOR INLINE GRINDER
Vendedor: SAMPLAST INC.
Año de construcción: usado
Ubicación: Land-open vertical tank with maag gear pomp (1x), make unknown, material stainless steel, capacity 200 ltr, vessel sizes dia. 600x700mm, without cover, dished bottom, outlet via maag gear pump (50-150 ltr/hr), internal heating spiral, motor pump 0,25 kw, 220/380 volt (ex), mounted on legs, floorspace 1,0x0,9 m, total height 1,9 mvertical tankstanks > vertical tanks what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! OPEN VERTICAL TANK WITH MAAG GEAR POMP (1X), MAKE UNKNOWN, MATERIAL STAINLESS STEEL, CAPACITY 200 LTR, VESSEL SIZES DIA. 600X700MM, WITHOUT COVER, DISHED BOTTOM, OUTLET VIA MAAG GEAR PUMP (50-150 LTR/HR), INTERNAL HEATING SPIRAL, MOTOR PUMP 0,25 KW, 220/380 VOLT (EX), MOUNTED ON LEGS, FLOORSPACE 1,0X0,9 M, TOTAL HEIGHT 1,9 MVERTICAL TANKSTANKS > VERTICAL TANKS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-maag producer

model sh 100

maximum diameter of the cut wheel - 1200 mm.
wheel width - 320 mm,
max modules - 15.
min modules - 2,
weight of the machine - 9 tons
dimensions of the machine - 3.3 x 2.2 x 2.8 m. MAAG PRODUCER MODEL SH 100 MAXIMUM DIAMETER OF THE CUT WHEEL - 1200 MM. WHEEL WIDTH - 320 MM, MAX MODULES - 15. MIN MODULES - 2, WEIGHT OF THE MACHINE - 9 TONS DIMENSIONS OF THE MACHINE - 3.3 X 2.2 X 2.8 M.
Vendedor: Blachmix
Año de construcción: usado
Ubicación: Land-film evaporator, make uic gmbh, type kd10-2 s, new 1999, extra specifications short path vacuum distillation system kd10-2 s, pilot scale, manuf. by uic gmbh , built 1999, with 2 ss evaporators type kd 10 (evaporation surface 0,1 m²) with short path distillators type kd 10, volume: vessel: 7,2 l heating room: 0,7 l, condenser: 0,5 l, pressure: -1 bar, heating room -1/7bar, condenser -1/8bar, temperatures: vessel: 350°c, heating room 350°c, condenser 250°c, with 3 x 0,2 m² cold trap , stainless steel 1.4571, 30 l jacketed stainless steel receiver, heated ss melt funnel, trivac rotary vacuum pump , ruvac roots pump made by leybold . with heated maaggear pump pump system used for solids distillation, designed with 9 individual heating/cooling devices – also available under separate sku numbersfilm evaporatorsdistillation > film evaporators what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! FILM EVAPORATOR, MAKE UIC GMBH, TYPE KD10-2 S, NEW 1999, EXTRA SPECIFICATIONS SHORT PATH VACUUM DISTILLATION SYSTEM KD10-2 S, PILOT SCALE, MANUF. BY UIC GMBH , BUILT 1999, WITH 2 SS EVAPORATORS TYPE KD 10 (EVAPORATION SURFACE 0,1 M²) WITH SHORT PATH DISTILLATORS TYPE KD 10, VOLUME: VESSEL: 7,2 L HEATING ROOM: 0,7 L, CONDENSER: 0,5 L, PRESSURE: -1 BAR, HEATING ROOM -1/7BAR, CONDENSER -1/8BAR, TEMPERATURES: VESSEL: 350°C, HEATING ROOM 350°C, CONDENSER 250°C, WITH 3 X 0,2 M² COLD TRAP , STAINLESS STEEL 1.4571, 30 L JACKETED STAINLESS STEEL RECEIVER, HEATED SS MELT FUNNEL, TRIVAC ROTARY VACUUM PUMP , RUVAC ROOTS PUMP MADE BY LEYBOLD . WITH HEATED MAAGGEAR PUMP PUMP SYSTEM USED FOR SOLIDS DISTILLATION, DESIGNED WITH 9 INDIVIDUAL HEATING/COOLING DEVICES – ALSO AVAILABLE UNDER SEPARATE SKU NUMBERSFILM EVAPORATORSDISTILLATION > FILM EVAPORATORS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-type: test and inspection of gear wheels
weight: 530 kg.
notes:
work piece diameter min-max 15-300 mm (with pedestal) 600 mm (senzacolonna)-form 1-15-150 mm face width min-max TYPE: TEST AND INSPECTION OF GEAR WHEELS WEIGHT: 530 KG. NOTES: WORK PIECE DIAMETER MIN-MAX 15-300 MM (WITH PEDESTAL) 600 MM (SENZACOLONNA)-FORM 1-15-150 MM FACE WIDTH MIN-MAX
Vendedor: B.M. MACCHINE UTENSILI srl
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 450 mm<br/>gear width: 400 mm<br/>max. module: 20 <br/>min. module: 0,2 <br/>total power requirement:  kw<br/>weight of the machine ca.: 0,1 t<br/>dimensions of the machine ca.: 0,7 x 0,3 x 0,6 m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 450 MM
GEAR WIDTH: 400 MM
MAX. MODULE: 20
MIN. MODULE: 0,2
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,1 T
DIMENSIONS OF THE MACHINE CA.: 0,7 X 0,3 X 0,6 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-various maag pump e.g. extrex 90, 70, 56, and 36

reconditioned
 
available from stock in wuppertal.
more details on request VARIOUS MAAG PUMP E.G. EXTREX 90, 70, 56, AND 36 RECONDITIONED AVAILABLE FROM STOCK IN WUPPERTAL. MORE DETAILS ON REQUEST
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 600 mm<br/>gear width: 150 mm<br/>max. module: 15 <br/>min. module: 1 <br/>clamping length min.: 45 mm<br/>clamping length max.: 750 mm<br/>workpiece weight: 150 kg<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,55 t<br/>dimensions of the machine ca.: 1,2x0,8x1,95 m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 600 MM
GEAR WIDTH: 150 MM
MAX. MODULE: 15
MIN. MODULE: 1
CLAMPING LENGTH MIN.: 45 MM
CLAMPING LENGTH MAX.: 750 MM
WORKPIECE WEIGHT: 150 KG
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,55 T
DIMENSIONS OF THE MACHINE CA.: 1,2X0,8X1,95 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-sh75
max. wheel diameter 750 mm
gear width 200 mm
max. module 10
min. module 1
min. wheel diameter 30 mm
max. number of teeth 300
min. number of teeth 6
tooth helical angle min/max 0 / 60 °
min. ram stroke 0 mm
max. ram stroke 225 mm
table diameter 500 mm
table load 0,8 t
no. of strokes 23,5 - 150 hub/min
table hole 90 mm
total power requirement 7 kw
weight of the machine ca. 3,8 t
dimensions of the machine ca. 2,1 x 1,7 x 2,1 m SH75 MAX. WHEEL DIAMETER 750 MM GEAR WIDTH 200 MM MAX. MODULE 10 MIN. MODULE 1 MIN. WHEEL DIAMETER 30 MM MAX. NUMBER OF TEETH 300 MIN. NUMBER OF TEETH 6 TOOTH HELICAL ANGLE MIN/MAX 0 / 60 ° MIN. RAM STROKE 0 MM MAX. RAM STROKE 225 MM TABLE DIAMETER 500 MM TABLE LOAD 0,8 T NO. OF STROKES 23,5 - 150 HUB/MIN TABLE HOLE 90 MM TOTAL POWER REQUIREMENT 7 KW WEIGHT OF THE MACHINE CA. 3,8 T DIMENSIONS OF THE MACHINE CA. 2,1 X 1,7 X 2,1 M
Vendedor: Ing. Milan Pazout
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 3000 mm<br/>gear width: 430 mm<br/>max. module: 20 / 40 <br/>min. module: 2 <br/>min. wheel diameter: 60 mm<br/>max.helical angle: 45 °<br/>no. of teeth: 10 - 400 <br/>clamping table diameter: 1000 mm<br/>table hole: 360 mm<br/>table load capacity: 8000 kp<br/>ram stroke - adjustable min/max: 75 - 450 mm<br/>strokes of ram per min.: 4,5 - 107 <br/>main drive motor: 15 kw<br/>max. distance table - ram: 1300 mm<br/>total power requirement: ca. 20 kw<br/>weight of the machine ca.: 20 t<br/>dimensions of the machine ca.: 4,5 x 5,2 x 3,4 m<br/>overhauled the backlash of the table<br/>slide of the main head reconditioned in 2004 with resofil material<br/>- set of change gears.<br/>- counter support.<br/>- attachment for racks.<br/>- internal head with its transmission.<br/>- radial working system.<br/>- table diameter 1.400 mm.<br/>- external fix head.<br/>- complete conic rim support for external table<br/> swivelling cutter holder ds (oblique head) <br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 3000 MM
GEAR WIDTH: 430 MM
MAX. MODULE: 20 / 40
MIN. MODULE: 2
MIN. WHEEL DIAMETER: 60 MM
MAX.HELICAL ANGLE: 45 °
NO. OF TEETH: 10 - 400
CLAMPING TABLE DIAMETER: 1000 MM
TABLE HOLE: 360 MM
TABLE LOAD CAPACITY: 8000 KP
RAM STROKE - ADJUSTABLE MIN/MAX: 75 - 450 MM
STROKES OF RAM PER MIN.: 4,5 - 107
MAIN DRIVE MOTOR: 15 KW
MAX. DISTANCE TABLE - RAM: 1300 MM
TOTAL POWER REQUIREMENT: CA. 20 KW
WEIGHT OF THE MACHINE CA.: 20 T
DIMENSIONS OF THE MACHINE CA.: 4,5 X 5,2 X 3,4 M
OVERHAULED THE BACKLASH OF THE TABLE
SLIDE OF THE MAIN HEAD RECONDITIONED IN 2004 WITH RESOFIL MATERIAL
- SET OF CHANGE GEARS.
- COUNTER SUPPORT.
- ATTACHMENT FOR RACKS.
- INTERNAL HEAD WITH ITS TRANSMISSION.
- RADIAL WORKING SYSTEM.
- TABLE DIAMETER 1.400 MM.
- EXTERNAL FIX HEAD.
- COMPLETE CONIC RIM SUPPORT FOR EXTERNAL TABLE
SWIVELLING CUTTER HOLDER DS (OBLIQUE HEAD)





Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 5.950 €
Ubicación: Land-used tooth flanks schleifmaschinemarke: maag zurich
model hss 10
wheel diameter 150 mm!

we can specify shipping costs upon request stating your postal code!

contact person mr. mã¼ller
see also our over 200 more offers.
(subject to alterations reserved in the technical data, data and prices, as well as sale!) USED TOOTH FLANKS SCHLEIFMASCHINEMARKE: MAAG ZURICH MODEL HSS 10 WHEEL DIAMETER 150 MM! WE CAN SPECIFY SHIPPING COSTS UPON REQUEST STATING YOUR POSTAL CODE! CONTACT PERSON MR. M&ATILDE;&FRAC14;LLER SEE ALSO OUR OVER 200 MORE OFFERS. (SUBJECT TO ALTERATIONS RESERVED IN THE TECHNICAL DATA, DATA AND PRICES, AS WELL AS SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-knife length: 0 mm<br/>knife width: 0 mm<br/>knife thickness:  mm<br/>total power requirement: 1 kw<br/>weight: 1000 kg<br/>overall size:  mm<br/><br/><br/><br/><br/> KNIFE LENGTH: 0 MM
KNIFE WIDTH: 0 MM
KNIFE THICKNESS: MM
TOTAL POWER REQUIREMENT: 1 KW
WEIGHT: 1000 KG
OVERALL SIZE: MM




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-maximum-wheel diameter : 580 mm	
module - maximum: 15	
machine weight: 1000 kg	
machine dimensions: 2000 x 1100 x 1800 mm		  MAXIMUM-WHEEL DIAMETER : 580 MM MODULE - MAXIMUM: 15 MACHINE WEIGHT: 1000 KG MACHINE DIMENSIONS: 2000 X 1100 X 1800 MM
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: na mm<br/>gear width: na mm<br/>max. module:  <br/>min. module:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>manually operated 2-flank gear tester<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: NA MM
GEAR WIDTH: NA MM
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
MANUALLY OPERATED 2-FLANK GEAR TESTER




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-inline welex coextrusion line age 1996 and illig rdm 58/ 3 lid forming line, age 1989 :-

4-part maguire mixer/ doser
90 mm welex main extruder
50 mm welex coextruder
hydraulic screen changer
maag melt pump
coex. block
flexlip die
890 mm x 300 mm 3-roll cooling/ polishing stack
complete pump group

illig rdm 58/ 3 lidformer age 1989 with:
standard illig mechanical indexing
double heating, top heater 24.75 kw, lower heater 22.50 kw
form area 315 x 550 mm
max. sheet width 580
max. index 330
draw +/ - 30/ 30 mm
counter/ stacker unit
inline illig rs75 grinder with sound proof housing & blower

** inclusive of a 10 cavity lid mold for 86 mm dia lids, inclusive of complete stacking parts.
*** video with equipment in production available
  INLINE WELEX COEXTRUSION LINE AGE 1996 AND ILLIG RDM 58/ 3 LID FORMING LINE, AGE 1989 :- 4-PART MAGUIRE MIXER/ DOSER 90 MM WELEX MAIN EXTRUDER 50 MM WELEX COEXTRUDER HYDRAULIC SCREEN CHANGER MAAG MELT PUMP COEX. BLOCK FLEXLIP DIE 890 MM X 300 MM 3-ROLL COOLING/ POLISHING STACK COMPLETE PUMP GROUP ILLIG RDM 58/ 3 LIDFORMER AGE 1989 WITH: STANDARD ILLIG MECHANICAL INDEXING DOUBLE HEATING, TOP HEATER 24.75 KW, LOWER HEATER 22.50 KW FORM AREA 315 X 550 MM MAX. SHEET WIDTH 580 MAX. INDEX 330 DRAW +/ - 30/ 30 MM COUNTER/ STACKER UNIT INLINE ILLIG RS75 GRINDER WITH SOUND PROOF HOUSING & BLOWER ** INCLUSIVE OF A 10 CAVITY LID MOLD FOR 86 MM DIA LIDS, INCLUSIVE OF COMPLETE STACKING PARTS. *** VIDEO WITH EQUIPMENT IN PRODUCTION AVAILABLE
Vendedor: SAMPLAST INC.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 600 mm<br/>gear width: na mm<br/>max. module: 20 <br/>min. module:  <br/>working area: 600 x 150 mm<br/>number of axles: 3 st.<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>gear tester for profile and flank direction <br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 600 MM
GEAR WIDTH: NA MM
MAX. MODULE: 20
MIN. MODULE:
WORKING AREA: 600 X 150 MM
NUMBER OF AXLES: 3 ST.
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
GEAR TESTER FOR PROFILE AND FLANK DIRECTION




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter:3080 mm<br/>min. wheel diameter:200 mm<br/>gear width: mm<br/>module (generating cutter):50 <br/>module (profile cutter):25 <br/>max. number of teeth:1000 <br/>min. number of teeth:12 <br/>tool length - max.:ca. 312 mm<br/>min. ram stroke:70 mm<br/>dividing plate diameter:1116 mm<br/>table bore diameter:420 mm<br/>table travel max.:2 x 460 = 920 mm<br/>ram stroke speed:3,2 - 40 m/min.<br/>max. ram stroke:700 mm<br/>table load:15000 kg<br/>ram strokes per shifting:8 - 150 <br/>depth of hole:1200 mm<br/>max. wheel diameter (internal cutting):3300  mm<br/>max. dia. of teeth cutting (internal gearing):2940 mm<br/>distance between head and table:1180 mm<br/>gear width (internal cutting):365 mm<br/>clamping table diameter:1100 mm<br/>helical adjustment of ram:unbeschränkt/unlimited °<br/>max.helical angle:35  °<br/>dimensions of the machine ca.:6550 x 4275 x 3310 mm<br/>power capacity:71 kw<br/>weight of the machine ca.:38000 kg<br/>chip conveyor: 1<br/>local rim support (swivel head mounted): 1<br/>local rim support (bed mounted): 1<br/>internal gear cutting attachment jvs-250: 1<br/>work base plate Ø1800 mm: 1<br/>longitudinal correction device: <br/><br/>the machine is practically new and will be delivered with a precision chart. cutting quality din 7!  the main characteristics of the machine are excellent accuracy and high versatility in producing external gears, internal gears, herringbone gears, double helical gears and gear racks. the outstanding economy of the maag sh 250/300 s derives from the high metal removal rate (for material until 1400 n/mm2 and 400 hb) and simplicity of form and long tool life of the roughing cutter, which keeps the tooling costs extremely low. after the roughing operation, the gear teeth are finished machined in the same set-up by the generating method. and that makes it in most of all cases possible, to avoid grinding. with the full swivel cutter ram, any desired helix angle can be set. the finishing generating operation yields a very good tooth accuracy in short machining time. the machining cycles for the plunge cut and the generating operations take place automatically. the vertical working range is so large that even double-helical gears can usually be completely machined without altering the set-up. the cutter ram is driven by a dc reversible motor via a 7-start spindle. helical gears or double helical gears with a small run-out groove could be cut by a helical rack shaped cutter.  when using the swivelling cutter holder for cutting gears with great helix angles the ram stroke could be highly reduced. MAX. WHEEL DIAMETER:3080 MM
MIN. WHEEL DIAMETER:200 MM
GEAR WIDTH: MM
MODULE (GENERATING CUTTER):50
MODULE (PROFILE CUTTER):25
MAX. NUMBER OF TEETH:1000
MIN. NUMBER OF TEETH:12
TOOL LENGTH - MAX.:CA. 312 MM
MIN. RAM STROKE:70 MM
DIVIDING PLATE DIAMETER:1116 MM
TABLE BORE DIAMETER:420 MM
TABLE TRAVEL MAX.:2 X 460 = 920 MM
RAM STROKE SPEED:3,2 - 40 M/MIN.
MAX. RAM STROKE:700 MM
TABLE LOAD:15000 KG
RAM STROKES PER SHIFTING:8 - 150
DEPTH OF HOLE:1200 MM
MAX. WHEEL DIAMETER (INTERNAL CUTTING):3300 MM
MAX. DIA. OF TEETH CUTTING (INTERNAL GEARING):2940 MM
DISTANCE BETWEEN HEAD AND TABLE:1180 MM
GEAR WIDTH (INTERNAL CUTTING):365 MM
CLAMPING TABLE DIAMETER:1100 MM
HELICAL ADJUSTMENT OF RAM:UNBESCHRäNKT/UNLIMITED °
MAX.HELICAL ANGLE:35 °
DIMENSIONS OF THE MACHINE CA.:6550 X 4275 X 3310 MM
POWER CAPACITY:71 KW
WEIGHT OF THE MACHINE CA.:38000 KG
CHIP CONVEYOR: 1
LOCAL RIM SUPPORT (SWIVEL HEAD MOUNTED): 1
LOCAL RIM SUPPORT (BED MOUNTED): 1
INTERNAL GEAR CUTTING ATTACHMENT JVS-250: 1
WORK BASE PLATE Ø1800 MM: 1
LONGITUDINAL CORRECTION DEVICE:

THE MACHINE IS PRACTICALLY NEW AND WILL BE DELIVERED WITH A PRECISION CHART. CUTTING QUALITY DIN 7! THE MAIN CHARACTERISTICS OF THE MACHINE ARE EXCELLENT ACCURACY AND HIGH VERSATILITY IN PRODUCING EXTERNAL GEARS, INTERNAL GEARS, HERRINGBONE GEARS, DOUBLE HELICAL GEARS AND GEAR RACKS. THE OUTSTANDING ECONOMY OF THE MAAG SH 250/300 S DERIVES FROM THE HIGH METAL REMOVAL RATE (FOR MATERIAL UNTIL 1400 N/MM2 AND 400 HB) AND SIMPLICITY OF FORM AND LONG TOOL LIFE OF THE ROUGHING CUTTER, WHICH KEEPS THE TOOLING COSTS EXTREMELY LOW. AFTER THE ROUGHING OPERATION, THE GEAR TEETH ARE FINISHED MACHINED IN THE SAME SET-UP BY THE GENERATING METHOD. AND THAT MAKES IT IN MOST OF ALL CASES POSSIBLE, TO AVOID GRINDING. WITH THE FULL SWIVEL CUTTER RAM, ANY DESIRED HELIX ANGLE CAN BE SET. THE FINISHING GENERATING OPERATION YIELDS A VERY GOOD TOOTH ACCURACY IN SHORT MACHINING TIME. THE MACHINING CYCLES FOR THE PLUNGE CUT AND THE GENERATING OPERATIONS TAKE PLACE AUTOMATICALLY. THE VERTICAL WORKING RANGE IS SO LARGE THAT EVEN DOUBLE-HELICAL GEARS CAN USUALLY BE COMPLETELY MACHINED WITHOUT ALTERING THE SET-UP. THE CUTTER RAM IS DRIVEN BY A DC REVERSIBLE MOTOR VIA A 7-START SPINDLE. HELICAL GEARS OR DOUBLE HELICAL GEARS WITH A SMALL RUN-OUT GROOVE COULD BE CUT BY A HELICAL RACK SHAPED CUTTER. WHEN USING THE SWIVELLING CUTTER HOLDER FOR CUTTING GEARS WITH GREAT HELIX ANGLES THE RAM STROKE COULD BE HIGHLY REDUCED.
Vendedor: Teco Werkzeugmaschinen GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter:5000 mm<br/>gear width:520 mm<br/>max. module:40 <br/>min. module:5 <br/>number of teeth:12-500 <br/>max.helical angle:45 °<br/>stroke:80 - 560 mm<br/>table travel max.:900 mm<br/>table diameter:1500 mm<br/>table hole:310 mm<br/>workpiece weight:8000 kg<br/>strokes per minute:4,5-106 <br/>rotation feed:10-120 <br/>electrics - voltage/frequency:380 / 50 v/hz<br/>total power requirement:13 kw<br/>weight of the machine ca.:32 t<br/>dimensions of the machine ca.:6,2x4,0x3,7 m<br/>electric cabinet: 1<br/>internal shaping attachment jv 100: 1<br/><br/>the machine was overhauled in 1991 and was not used since!  the machine is for production of spur and helical gears of high accuracy. the machine produces in din quality 8 (din 7)! MAX. WHEEL DIAMETER:5000 MM
GEAR WIDTH:520 MM
MAX. MODULE:40
MIN. MODULE:5
NUMBER OF TEETH:12-500
MAX.HELICAL ANGLE:45 °
STROKE:80 - 560 MM
TABLE TRAVEL MAX.:900 MM
TABLE DIAMETER:1500 MM
TABLE HOLE:310 MM
WORKPIECE WEIGHT:8000 KG
STROKES PER MINUTE:4,5-106
ROTATION FEED:10-120
ELECTRICS - VOLTAGE/FREQUENCY:380 / 50 V/HZ
TOTAL POWER REQUIREMENT:13 KW
WEIGHT OF THE MACHINE CA.:32 T
DIMENSIONS OF THE MACHINE CA.:6,2X4,0X3,7 M
ELECTRIC CABINET: 1
INTERNAL SHAPING ATTACHMENT JV 100: 1

THE MACHINE WAS OVERHAULED IN 1991 AND WAS NOT USED SINCE! THE MACHINE IS FOR PRODUCTION OF SPUR AND HELICAL GEARS OF HIGH ACCURACY. THE MACHINE PRODUCES IN DIN QUALITY 8 (DIN 7)!
Vendedor: Teco Werkzeugmaschinen GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-general characteristics  
max. cutter's race  30 - 345 mm  
maxi. stroke  320 mm  
module  min: 2 / máx: 15  
Ø max. external carving  1.250 mm  
Ø max. inside  1.000 mm  
table features  
Ø table  750 mm  
dimensions and weights  
high  2.700 mm  
long  2.900 mm  
weight  10.000 kg  
width  2.200 mm  
other features  
included accessories  aparato de interiores, engranaje de cambio/ apparatus interior, gear change,  
no. manufacturing  5976  
url youtube  abc://youtu.be/7_rbtmdfr7k  
year  1.964  
 GENERAL CHARACTERISTICS MAX. CUTTER'S RACE 30 - 345 MM MAXI. STROKE 320 MM MODULE MIN: 2 / MáX: 15 Ø MAX. EXTERNAL CARVING 1.250 MM Ø MAX. INSIDE 1.000 MM TABLE FEATURES Ø TABLE 750 MM DIMENSIONS AND WEIGHTS HIGH 2.700 MM LONG 2.900 MM WEIGHT 10.000 KG WIDTH 2.200 MM OTHER FEATURES INCLUDED ACCESSORIES APARATO DE INTERIORES, ENGRANAJE DE CAMBIO/ APPARATUS INTERIOR, GEAR CHANGE, NO. MANUFACTURING 5976 URL YOUTUBE ABC://YOUTU.BE/7_RBTMDFR7K YEAR 1.964
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter:3080 mm<br/>min. wheel diameter:200 mm<br/>gear width:670 mm<br/>gear width:870 (drehklappe) mm<br/>max. module:25 (profilfräser) <br/>max. module:50 (generating-fräser) <br/>max. number of teeth:1000 <br/>min. number of teeth:12 <br/>tool length - max.:ca. 312 mm<br/>max. ram stroke:700 mm<br/>min. ram stroke:70 mm<br/>depth of hole:1200 mm<br/>dividing plate diameter:1116 mm<br/>table bore diameter:420 mm<br/>table travel max.:2 x 460 = 920 mm<br/>ram stroke speed:3,2 - 40 m/min.<br/>table load:15000 kg<br/>ram strokes per shifting:8 - 150 <br/>clamping table diameter:1100 mm<br/>helical adjustment of ram:unbeschränkt °<br/>max.helical angle:35 (drehklappe) °<br/>power capacity:71 kw<br/>weight of the machine ca.:38000 kg<br/>dimensions of the machine ca.:6550 x 4275 x 3310 mm<br/>chip conveyor: 1<br/> swivelling cutter holder ds-250: 1<br/>local rim support (bed mounted): 1<br/>local rim support (swivel head mounted): 1<br/>work base plate Ø 2600 mm: 1<br/> longitudinal correction device for 0,2 mm max. relief: 1<br/><br/>the machine is practically new and will be delivered with a precision chart. cutting quality din 7!  the main characteristics of the machine are excellent accuracy and high versatility in producing external gears, internal gears, herringbone gears, double helical gears and gear racks. the outstanding economy of the maag sh 250/300 s derives from the high metal removal rate (for material until 1400 n/mm2 and 400 hb) and simplicity of form and long tool life of the roughing cutter, which keeps the tooling costs extremely low. after the roughing operation, the gear teeth are finished machined in the same set-up by the generating method. and that makes it in most of all cases possible, to avoid grinding. with the full swivel cutter ram, any desired helix angle can be set. the finishing generating operation yields a very good tooth accuracy in short machining time. the machining cycles for the plunge cut and the generating operations take place automatically. the vertical working range is so large that even double-helical gears can usually be completely machined without altering the set-up. the cutter ram is driven by a dc reversible motor via a 7-start spindle. the machine is equipped with a swivelling cutter holder ds-250. helical gears or double helical gears with a small run-out groove could be cut by a helical rack shaped cutter. when using the swivelling cutter holder for cutting gears with great helix angles the ram stroke could be highly reduced. MAX. WHEEL DIAMETER:3080 MM
MIN. WHEEL DIAMETER:200 MM
GEAR WIDTH:670 MM
GEAR WIDTH:870 (DREHKLAPPE) MM
MAX. MODULE:25 (PROFILFRäSER)
MAX. MODULE:50 (GENERATING-FRäSER)
MAX. NUMBER OF TEETH:1000
MIN. NUMBER OF TEETH:12
TOOL LENGTH - MAX.:CA. 312 MM
MAX. RAM STROKE:700 MM
MIN. RAM STROKE:70 MM
DEPTH OF HOLE:1200 MM
DIVIDING PLATE DIAMETER:1116 MM
TABLE BORE DIAMETER:420 MM
TABLE TRAVEL MAX.:2 X 460 = 920 MM
RAM STROKE SPEED:3,2 - 40 M/MIN.
TABLE LOAD:15000 KG
RAM STROKES PER SHIFTING:8 - 150
CLAMPING TABLE DIAMETER:1100 MM
HELICAL ADJUSTMENT OF RAM:UNBESCHRäNKT °
MAX.HELICAL ANGLE:35 (DREHKLAPPE) °
POWER CAPACITY:71 KW
WEIGHT OF THE MACHINE CA.:38000 KG
DIMENSIONS OF THE MACHINE CA.:6550 X 4275 X 3310 MM
CHIP CONVEYOR: 1
SWIVELLING CUTTER HOLDER DS-250: 1
LOCAL RIM SUPPORT (BED MOUNTED): 1
LOCAL RIM SUPPORT (SWIVEL HEAD MOUNTED): 1
WORK BASE PLATE Ø 2600 MM: 1
LONGITUDINAL CORRECTION DEVICE FOR 0,2 MM MAX. RELIEF: 1

THE MACHINE IS PRACTICALLY NEW AND WILL BE DELIVERED WITH A PRECISION CHART. CUTTING QUALITY DIN 7! THE MAIN CHARACTERISTICS OF THE MACHINE ARE EXCELLENT ACCURACY AND HIGH VERSATILITY IN PRODUCING EXTERNAL GEARS, INTERNAL GEARS, HERRINGBONE GEARS, DOUBLE HELICAL GEARS AND GEAR RACKS. THE OUTSTANDING ECONOMY OF THE MAAG SH 250/300 S DERIVES FROM THE HIGH METAL REMOVAL RATE (FOR MATERIAL UNTIL 1400 N/MM2 AND 400 HB) AND SIMPLICITY OF FORM AND LONG TOOL LIFE OF THE ROUGHING CUTTER, WHICH KEEPS THE TOOLING COSTS EXTREMELY LOW. AFTER THE ROUGHING OPERATION, THE GEAR TEETH ARE FINISHED MACHINED IN THE SAME SET-UP BY THE GENERATING METHOD. AND THAT MAKES IT IN MOST OF ALL CASES POSSIBLE, TO AVOID GRINDING. WITH THE FULL SWIVEL CUTTER RAM, ANY DESIRED HELIX ANGLE CAN BE SET. THE FINISHING GENERATING OPERATION YIELDS A VERY GOOD TOOTH ACCURACY IN SHORT MACHINING TIME. THE MACHINING CYCLES FOR THE PLUNGE CUT AND THE GENERATING OPERATIONS TAKE PLACE AUTOMATICALLY. THE VERTICAL WORKING RANGE IS SO LARGE THAT EVEN DOUBLE-HELICAL GEARS CAN USUALLY BE COMPLETELY MACHINED WITHOUT ALTERING THE SET-UP. THE CUTTER RAM IS DRIVEN BY A DC REVERSIBLE MOTOR VIA A 7-START SPINDLE. THE MACHINE IS EQUIPPED WITH A SWIVELLING CUTTER HOLDER DS-250. HELICAL GEARS OR DOUBLE HELICAL GEARS WITH A SMALL RUN-OUT GROOVE COULD BE CUT BY A HELICAL RACK SHAPED CUTTER. WHEN USING THE SWIVELLING CUTTER HOLDER FOR CUTTING GEARS WITH GREAT HELIX ANGLES THE RAM STROKE COULD BE HIGHLY REDUCED.
Vendedor: Teco Werkzeugmaschinen GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-max. diameter 600 mm.
measuring height 250 mm.
machine weight 800 kg.    MAX. DIAMETER 600 MM. MEASURING HEIGHT 250 MM. MACHINE WEIGHT 800 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-lot of 6pcs. daub oven thermo-roll type rdto 08.12,5.10 sx02 or 10.12,5.10

a furnace for 20 sheets

usable area of 10 m² or 12 m²

6 oven total total area 60 m² or 72 m² - 120bleche

oven is in very excellent condition,

general and thorough overhauled and tested.

works like new.

very good steam.

secondary circuit for the baking chamber.

turbo equipment.

all maagnetic pump

incl. daub thermal oil boiler plant

including. 40 piece rack

sales including freight and installation

price on request   LOT OF 6PCS. DAUB OVEN THERMO-ROLL TYPE RDTO 08.12,5.10 SX02 OR 10.12,5.10 A FURNACE FOR 20 SHEETS USABLE AREA OF 10 M&SUP2; OR 12 M&SUP2; 6 OVEN TOTAL TOTAL AREA 60 M&SUP2; OR 72 M&SUP2; - 120BLECHE OVEN IS IN VERY EXCELLENT CONDITION, GENERAL AND THOROUGH OVERHAULED AND TESTED. WORKS LIKE NEW. VERY GOOD STEAM. SECONDARY CIRCUIT FOR THE BAKING CHAMBER. TURBO EQUIPMENT. ALL MAAGNETIC PUMP INCL. DAUB THERMAL OIL BOILER PLANT INCLUDING. 40 PIECE RACK SALES INCLUDING FREIGHT AND INSTALLATION PRICE ON REQUEST
Vendedor: Anbox
Año de construcción: usado
Ubicación: Land-vooraanslag (cnc gestuurd) VOORAANSLAG (CNC GESTUURD)
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-unit with 4 kw motor
with pressure accumulator
display 0-400 bar
built in 2008 UNIT WITH 4 KW MOTOR WITH PRESSURE ACCUMULATOR DISPLAY 0-400 BAR BUILT IN 2008
Vendedor: pmh gmbh
Año de construcción: usado
Ubicación: Land-maximum gear diameter: 750 mm max module: 25.10 max gear width: 200 mm table size: 460 mm maximum workpiece weight: 800 kg machine dimensions l x w x h: 2400 x 1800 x 2300 mm machine weight: 6400 kg the machine is in good technical condition, after consultation, you can test. MAXIMUM GEAR DIAMETER: 750 MM MAX MODULE: 25.10 MAX GEAR WIDTH: 200 MM TABLE SIZE: 460 MM MAXIMUM WORKPIECE WEIGHT: 800 KG MACHINE DIMENSIONS L X W X H: 2400 X 1800 X 2300 MM MACHINE WEIGHT: 6400 KG THE MACHINE IS IN GOOD TECHNICAL CONDITION, AFTER CONSULTATION, YOU CAN TEST.
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-4st. daub oven thermo-rolling type rdto 08.12,5.10 sx02
 ofen for 20 tins
 usable total area 9.60 m and * 178

 4 ofen totally total area 38.40 m and * 178
 - 80tins

 stove is in very good state
 general and thorough outdated and checked.
 functions as anew.
 very good steam.
 secondary circulation for the baking chamber.
 turbo-equipment.
 everything maagnetic pumps
 incl. daub thermooel-boiler arrangement
 including. 8 stuck anew stikkenwagen
 sales incl. cargo and assembly


 price on inquiry 4ST. DAUB OVEN THERMO-ROLLING TYPE RDTO 08.12,5.10 SX02 OFEN FOR 20 TINS USABLE TOTAL AREA 9.60 M AND * 178 4 OFEN TOTALLY TOTAL AREA 38.40 M AND * 178 - 80TINS STOVE IS IN VERY GOOD STATE GENERAL AND THOROUGH OUTDATED AND CHECKED. FUNCTIONS AS ANEW. VERY GOOD STEAM. SECONDARY CIRCULATION FOR THE BAKING CHAMBER. TURBO-EQUIPMENT. EVERYTHING MAAGNETIC PUMPS INCL. DAUB THERMOOEL-BOILER ARRANGEMENT INCLUDING. 8 STUCK ANEW STIKKENWAGEN SALES INCL. CARGO AND ASSEMBLY PRICE ON INQUIRY
Vendedor: Anbox
Año de construcción: usado
Ubicación: Land-2st. daub oven thermo-rolling type rdto 08.12,5.10 sx02
 ofen for 20 tins
 usable total area 10.00 m and * 178

 baking surface floor 1.00 m and * 178

 baking square measure floor 78 x 58 cm
 2 ofen totally total area 20.00 m and * 178
 - 40tins

 stove is in very good state
 general and thorough outdated.
 functions as anew.
 a very good steam.
 secondary circulation for the baking chamber.
 turbo-equipment.
 everything maagnetic pumps
 incl. daub thermooel-boiler arrangement with magnetic pumps
 including. 8 stuck anew stikkenwagen
 including. 80 stuck rand two rand alubleche
 sales incl. cargo and assembly on inquiry
 i also have to sell 2st. daub oven thermo-rolling type rdto 08.12,5.7 usable total area 7.00 m and * 178
 (7 auflage, high shelves)


 price on inquiry 2ST. DAUB OVEN THERMO-ROLLING TYPE RDTO 08.12,5.10 SX02 OFEN FOR 20 TINS USABLE TOTAL AREA 10.00 M AND * 178 BAKING SURFACE FLOOR 1.00 M AND * 178 BAKING SQUARE MEASURE FLOOR 78 X 58 CM 2 OFEN TOTALLY TOTAL AREA 20.00 M AND * 178 - 40TINS STOVE IS IN VERY GOOD STATE GENERAL AND THOROUGH OUTDATED. FUNCTIONS AS ANEW. A VERY GOOD STEAM. SECONDARY CIRCULATION FOR THE BAKING CHAMBER. TURBO-EQUIPMENT. EVERYTHING MAAGNETIC PUMPS INCL. DAUB THERMOOEL-BOILER ARRANGEMENT WITH MAGNETIC PUMPS INCLUDING. 8 STUCK ANEW STIKKENWAGEN INCLUDING. 80 STUCK RAND TWO RAND ALUBLECHE SALES INCL. CARGO AND ASSEMBLY ON INQUIRY I ALSO HAVE TO SELL 2ST. DAUB OVEN THERMO-ROLLING TYPE RDTO 08.12,5.7 USABLE TOTAL AREA 7.00 M AND * 178 (7 AUFLAGE, HIGH SHELVES) PRICE ON INQUIRY
Vendedor: Anbox
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-gear grinder maag (switzerland), type: sd65
max. diameter: 650 mms, module: 1.5 / 15
year of construction in 1979, with a lot of accessories!     GEAR GRINDER MAAG (SWITZERLAND), TYPE: SD65 MAX. DIAMETER: 650 MMS, MODULE: 1.5 / 15 YEAR OF CONSTRUCTION IN 1979, WITH A LOT OF ACCESSORIES!
Vendedor: IS Industriemaschinen- und Stahlwarenhandel Ali Fi
Año de construcción: usado
Ubicación: Land-maag melt pump, model ex 90 with drive

also available :

maag ex 70/70
maag ex 32/32 MAAG MELT PUMP, MODEL EX 90 WITH DRIVE ALSO AVAILABLE : MAAG EX 70/70 MAAG EX 32/32
Vendedor: pmh gmbh
Año de construcción: usado
Ubicación: Land-maag melt pump, model ex 70,
with 18 kw ac-drive
 
also available melt pumps:

maag ex 36/36
maag ex 70
MAAG MELT PUMP, MODEL EX 70, WITH 18 KW AC-DRIVE ALSO AVAILABLE MELT PUMPS: MAAG EX 36/36 MAAG EX 70
Vendedor: pmh gmbh
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MAAG types: