29 ofertas

Año de construcción: usado
Ubicación: Land-used, year 2001.

ima avantage is 8200 a single-sided automatic edge shipping glue and finishing machine

in law execution
edge gluing with synthetic resin hot melt adhesive

technical data:
edging material:
a) veneer / coils and strips
b) plastic / coils and strips
c) solid wood mouldings
= edge height approx. 14-55 mm
edge thickness = approx. 0.4 20 mm
plate thickness = approx. 10-50 mm
min. panel width = 60 mm
min. panel length = 150 mm
max edge cross section:
-bar = approx. 20 x 50 mm
-pvc = approx. 3 x 55 mm
plates recusal from
the chain conveyor = 35 mm
drive for speed of
8-20 m / min, mech. infinitely variable

feed speed 4-20 m / min.

imatronic 121 with system software - integrated software plc replaced separate programmable machine controller
programming largely s5 compatible
-integrated control with maximum 64 routes features

486-compact pc industrial design with front panel (protection class ip 65),
hard disk 200 mb (minimum), ram 4 mb
floppy drive 3â½ "1.44 mb, screen color lcd

trimming unit 08.376
formatted to the edges after milling/calibration
workpieces or for milling of lateral grooves.
profiles, or folding
with 2 motors a 3.0 kw, 12000 rpm, 200 hz,
motor 1 in the tracking and motor 2 in the opposite direction working,

spotlight 300 lg, 1,5 kw, to the
preheating the workpiece edge

gluing unit 283.1513, straight edge 3 mm + bars

min. length of strip - simple/multiple roller 150 mm
min bar length 300 mm
min. strip height 14 mm
strip height 50 mm
maximum bar length at high hood 1200 mm

gluing unit designed for the pure mode,.

glue specification 0.8 l for pur glue
compl. m. cartridge & connectors

before melting pan approx. 1 l
regulated with a heating capacity 3 x 400 w

08.421, 2 motors, the top pressure mounted end-trimming unit
to the caps of the front and rear edges or edges overhang.
for caps cuts flush or with a chamfer, with 2 hm - cap saw blade 160 x 22 mm z = 48
min. plate recusal: approx. 30 mm + max edge or strip thickness
min. panel length: approx. 150 mm
min. distance between 2 pieces approx. 650 mm
maximum working speed: 20 m / min.
front / hinterkantentastschuh aussteuerbar
with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
max edge height 55 mm maximum edge thickness 20 mm
static frequency converter for motors
> 0.75 to 1.5 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz hor. pneum.. swivel device 0 + 10 â° for caps 08.421 per motor
with pneumatic ausrã¼ckbarer page keying, manually positioned on digital display.

milling unit 08.055 for 2 motors with heights keying, groping at the side,
up to 30 degrees, without tools with mechanical digital display 09 for the horizontal and vertical adjustment with single suction nozzle
before milling from above and below
with 1 motor of 1850 w, 400 v, 200 hz, 12000 rpm
20 degrees tilting working ikl658078 in the opposite direction
static frequency converter for motors > 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz ikl658648 motor with hsk holder
with side key skid for 1 motor, for the cracks, plate off and profile milling, ikl658805 2 st
linear axis for vertical motor positioning of the height of keying, fine adjustment

2 st pneumatic adjustment of the automatic upgrade at thin / thick edge or decommissioning at last

sound swallowing/guard for compound and 1 milling unit, suction connector 2 x 80 upwards,
locking mechanism according to the regulations of the bg

multiple processing unit 08.346,
to the fine milling and profile milling of the upper longitudinal edge as well as the front and rear edge.
with height and page keying,.
pneumatic feed motion horizontally and vertically.
with manual motor positioning in axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,.
with quick change facility, without any tools, including static frequency converters with automatic brake device. height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min. min. workpiece thickness at the corners copy 16 mm.

linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge)
 
tool hsk-25r to the copy / cut for r1-r3 only original equipment

multiple processing unit 08.346,
to the fine milling and profile milling the bottom lengthwise edge, as well as the front and rear edge, with height and page scanner,,
pneumatic feed motion horizontally and vertically. with manual motor positioning in
axle and radial direction via digital display, with 1 motor 660 w, 400 v, 200 hz, 12000 rpm,
with quick change facility, without any tools, including static frequency converter,.
with automatic brake device, height 235 mm,.
min. workpiece recusal 35 mm + edge thickness min. distance between 2 pieces: approx. 600 mm maximum speed: approx. 16 m / min.
min. werkstã¼ckdick corners copying 16 mm.
linear axis for horizontal motor positioning of the page scanner for automatic program change (radius - bevel) and fine adjustment at the mfa
with vertical positioning on 2 fixed points for automatic program change (e.g. bar/plastic edge) ikl0079659 79659 1 st
tool hsk-25r to the copy / cut for r1-r3 only original equipment

sound swallowing/guard with 2 hood suction nozzle ã?100 mm, below the transport chain, length 1200 mm

groove/groove/profile milling unit 08.183,
for cutting through side or bottom grooves, rebates or profiles, 1 motor
flã¤chennuten max to workpiece recusal minus 10 mm, swivel, without keying,
maximum engine power 3 kw without tool
with mechanical digital readout for the horizontal and vertical adjustment
 with 1 motor 3.0 kw, 12000 rpm, 200 hz, kns 51
maximum machining cross-section ca 20 m / min. approx. 70 qmm
working in the tracking
static frequency converter for motors
> 2.2 to 4.0 kw, incl. filter and braking resistor mains connection 3-phase, 400-480 v, +/-5%, 50/60 hz electro-pneumatic control of usage for the groove/groove/profilfrã¤sagg
sound swallowing/guard length 600-1050 mm

course reserve for 1 kantenschleif-unit with pre-wiring

profile scraping unit 08.519
the after scraping a upper and lower machined viertelkreisprofiles on glued on plastic edging materials, with pre-set hm scraper tools.
with height keying, side momentary mechanical digital display 09 for the horizontal and vertical adjustment, with electro-pneumatic horizontal jackshaft device for the upper and lower pulling blades unit with electro-pneumatic vertical release device for the lower unit of scraper
with single suction nozzle.
height 235 mm, min. workpiece thickness 16 mm iklr2 2 st
r = 2 mm
 
1 adjustment axis vertically for the profile scraper 08.519
dust-catching box for profile scraping unit

course reserve for 1 profile scraper with pre-wiring

auto-sensing scraping unit 08.50
to remove hot melt adhesives from the periphery of workpiece upper and subpages, controllable, with 2 cutting plates,
workpiece recusal min with 2 air nozzles to clean blow of the scraper 30 mm

course reserve for detergent indication with pre-wiring

fasschleif/buffing unit 08.612, not oscillating, after cleaning the top and bottom flush milled kantenmateriales or thick edges, polishing pivots on a vertical and horizontal axis
with 2 motors 0.25 kw, 230/400v, 50 hz, 1500 rpm.
with 1 polishing wheel diameter. 40 x 200 x 18
height 235 mm

pneumatic release device for the buffing unit 08.612

1 set of schwabbelscheiben2 st
for the aforementioned buffing unit 08.612 running in sticky-brite
complete with mounts
 
smoothness aggregate 08.53
to smooth the milled and
drawn out pvc/abs profile edge, for r = 1,3-4 mm, 1 upper and 1 lower smoothness zone,
min. workpiece thickness with horizontal pneumatic clutch device 16 mm

machine is still connected and can be seen in operation.
sale from location near stuttgart

the technical description comes from the original-from the manufacturer
 

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

delivery: from site's terms & conditions apply

USED, YEAR 2001. IMA AVANTAGE IS 8200 A SINGLE-SIDED AUTOMATIC EDGE SHIPPING GLUE AND FINISHING MACHINE IN LAW EXECUTION EDGE GLUING WITH SYNTHETIC RESIN HOT MELT ADHESIVE TECHNICAL DATA: EDGING MATERIAL: A) VENEER / COILS AND STRIPS B) PLASTIC / COILS AND STRIPS C) SOLID WOOD MOULDINGS = EDGE HEIGHT APPROX. 14-55 MM EDGE THICKNESS = APPROX. 0.4 20 MM PLATE THICKNESS = APPROX. 10-50 MM MIN. PANEL WIDTH = 60 MM MIN. PANEL LENGTH = 150 MM MAX EDGE CROSS SECTION: -BAR = APPROX. 20 X 50 MM -PVC = APPROX. 3 X 55 MM PLATES RECUSAL FROM THE CHAIN CONVEYOR = 35 MM DRIVE FOR SPEED OF 8-20 M / MIN, MECH. INFINITELY VARIABLE FEED SPEED 4-20 M / MIN. IMATRONIC 121 WITH SYSTEM SOFTWARE - INTEGRATED SOFTWARE PLC REPLACED SEPARATE PROGRAMMABLE MACHINE CONTROLLER PROGRAMMING LARGELY S5 COMPATIBLE -INTEGRATED CONTROL WITH MAXIMUM 64 ROUTES FEATURES 486-COMPACT PC INDUSTRIAL DESIGN WITH FRONT PANEL (PROTECTION CLASS IP 65), HARD DISK 200 MB (MINIMUM), RAM 4 MB FLOPPY DRIVE 3½ "1.44 MB, SCREEN COLOR LCD TRIMMING UNIT 08.376 FORMATTED TO THE EDGES AFTER MILLING/CALIBRATION WORKPIECES OR FOR MILLING OF LATERAL GROOVES. PROFILES, OR FOLDING WITH 2 MOTORS A 3.0 KW, 12000 RPM, 200 HZ, MOTOR 1 IN THE TRACKING AND MOTOR 2 IN THE OPPOSITE DIRECTION WORKING, SPOTLIGHT 300 LG, 1,5 KW, TO THE PREHEATING THE WORKPIECE EDGE GLUING UNIT 283.1513, STRAIGHT EDGE 3 MM + BARS MIN. LENGTH OF STRIP - SIMPLE/MULTIPLE ROLLER 150 MM MIN BAR LENGTH 300 MM MIN. STRIP HEIGHT 14 MM STRIP HEIGHT 50 MM MAXIMUM BAR LENGTH AT HIGH HOOD 1200 MM GLUING UNIT DESIGNED FOR THE PURE MODE,. GLUE SPECIFICATION 0.8 L FOR PUR GLUE COMPL. M. CARTRIDGE & CONNECTORS BEFORE MELTING PAN APPROX. 1 L REGULATED WITH A HEATING CAPACITY 3 X 400 W 08.421, 2 MOTORS, THE TOP PRESSURE MOUNTED END-TRIMMING UNIT TO THE CAPS OF THE FRONT AND REAR EDGES OR EDGES OVERHANG. FOR CAPS CUTS FLUSH OR WITH A CHAMFER, WITH 2 HM - CAP SAW BLADE 160 X 22 MM Z = 48 MIN. PLATE RECUSAL: APPROX. 30 MM + MAX EDGE OR STRIP THICKNESS MIN. PANEL LENGTH: APPROX. 150 MM MIN. DISTANCE BETWEEN 2 PIECES APPROX. 650 MM MAXIMUM WORKING SPEED: 20 M / MIN. FRONT / HINTERKANTENTASTSCHUH AUSSTEUERBAR WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. MAX EDGE HEIGHT 55 MM MAXIMUM EDGE THICKNESS 20 MM STATIC FREQUENCY CONVERTER FOR MOTORS > 0.75 TO 1.5 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ HOR. PNEUM.. SWIVEL DEVICE 0 + 10 ° FOR CAPS 08.421 PER MOTOR WITH PNEUMATIC AUSRüCKBARER PAGE KEYING, MANUALLY POSITIONED ON DIGITAL DISPLAY. MILLING UNIT 08.055 FOR 2 MOTORS WITH HEIGHTS KEYING, GROPING AT THE SIDE, UP TO 30 DEGREES, WITHOUT TOOLS WITH MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH SINGLE SUCTION NOZZLE BEFORE MILLING FROM ABOVE AND BELOW WITH 1 MOTOR OF 1850 W, 400 V, 200 HZ, 12000 RPM 20 DEGREES TILTING WORKING IKL658078 IN THE OPPOSITE DIRECTION STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ IKL658648 MOTOR WITH HSK HOLDER WITH SIDE KEY SKID FOR 1 MOTOR, FOR THE CRACKS, PLATE OFF AND PROFILE MILLING, IKL658805 2 ST LINEAR AXIS FOR VERTICAL MOTOR POSITIONING OF THE HEIGHT OF KEYING, FINE ADJUSTMENT 2 ST PNEUMATIC ADJUSTMENT OF THE AUTOMATIC UPGRADE AT THIN / THICK EDGE OR DECOMMISSIONING AT LAST SOUND SWALLOWING/GUARD FOR COMPOUND AND 1 MILLING UNIT, SUCTION CONNECTOR 2 X 80 UPWARDS, LOCKING MECHANISM ACCORDING TO THE REGULATIONS OF THE BG MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING OF THE UPPER LONGITUDINAL EDGE AS WELL AS THE FRONT AND REAR EDGE. WITH HEIGHT AND PAGE KEYING,. PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM,. WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTERS WITH AUTOMATIC BRAKE DEVICE. HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WORKPIECE THICKNESS AT THE CORNERS COPY 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT MULTIPLE PROCESSING UNIT 08.346, TO THE FINE MILLING AND PROFILE MILLING THE BOTTOM LENGTHWISE EDGE, AS WELL AS THE FRONT AND REAR EDGE, WITH HEIGHT AND PAGE SCANNER,, PNEUMATIC FEED MOTION HORIZONTALLY AND VERTICALLY. WITH MANUAL MOTOR POSITIONING IN AXLE AND RADIAL DIRECTION VIA DIGITAL DISPLAY, WITH 1 MOTOR 660 W, 400 V, 200 HZ, 12000 RPM, WITH QUICK CHANGE FACILITY, WITHOUT ANY TOOLS, INCLUDING STATIC FREQUENCY CONVERTER,. WITH AUTOMATIC BRAKE DEVICE, HEIGHT 235 MM,. MIN. WORKPIECE RECUSAL 35 MM + EDGE THICKNESS MIN. DISTANCE BETWEEN 2 PIECES: APPROX. 600 MM MAXIMUM SPEED: APPROX. 16 M / MIN. MIN. WERKSTüCKDICK CORNERS COPYING 16 MM. LINEAR AXIS FOR HORIZONTAL MOTOR POSITIONING OF THE PAGE SCANNER FOR AUTOMATIC PROGRAM CHANGE (RADIUS - BEVEL) AND FINE ADJUSTMENT AT THE MFA WITH VERTICAL POSITIONING ON 2 FIXED POINTS FOR AUTOMATIC PROGRAM CHANGE (E.G. BAR/PLASTIC EDGE) IKL0079659 79659 1 ST TOOL HSK-25R TO THE COPY / CUT FOR R1-R3 ONLY ORIGINAL EQUIPMENT SOUND SWALLOWING/GUARD WITH 2 HOOD SUCTION NOZZLE �100 MM, BELOW THE TRANSPORT CHAIN, LENGTH 1200 MM GROOVE/GROOVE/PROFILE MILLING UNIT 08.183, FOR CUTTING THROUGH SIDE OR BOTTOM GROOVES, REBATES OR PROFILES, 1 MOTOR FLäCHENNUTEN MAX TO WORKPIECE RECUSAL MINUS 10 MM, SWIVEL, WITHOUT KEYING, MAXIMUM ENGINE POWER 3 KW WITHOUT TOOL WITH MECHANICAL DIGITAL READOUT FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT WITH 1 MOTOR 3.0 KW, 12000 RPM, 200 HZ, KNS 51 MAXIMUM MACHINING CROSS-SECTION CA 20 M / MIN. APPROX. 70 QMM WORKING IN THE TRACKING STATIC FREQUENCY CONVERTER FOR MOTORS > 2.2 TO 4.0 KW, INCL. FILTER AND BRAKING RESISTOR MAINS CONNECTION 3-PHASE, 400-480 V, +/-5%, 50/60 HZ ELECTRO-PNEUMATIC CONTROL OF USAGE FOR THE GROOVE/GROOVE/PROFILFRäSAGG SOUND SWALLOWING/GUARD LENGTH 600-1050 MM COURSE RESERVE FOR 1 KANTENSCHLEIF-UNIT WITH PRE-WIRING PROFILE SCRAPING UNIT 08.519 THE AFTER SCRAPING A UPPER AND LOWER MACHINED VIERTELKREISPROFILES ON GLUED ON PLASTIC EDGING MATERIALS, WITH PRE-SET HM SCRAPER TOOLS. WITH HEIGHT KEYING, SIDE MOMENTARY MECHANICAL DIGITAL DISPLAY 09 FOR THE HORIZONTAL AND VERTICAL ADJUSTMENT, WITH ELECTRO-PNEUMATIC HORIZONTAL JACKSHAFT DEVICE FOR THE UPPER AND LOWER PULLING BLADES UNIT WITH ELECTRO-PNEUMATIC VERTICAL RELEASE DEVICE FOR THE LOWER UNIT OF SCRAPER WITH SINGLE SUCTION NOZZLE. HEIGHT 235 MM, MIN. WORKPIECE THICKNESS 16 MM IKLR2 2 ST R = 2 MM 1 ADJUSTMENT AXIS VERTICALLY FOR THE PROFILE SCRAPER 08.519 DUST-CATCHING BOX FOR PROFILE SCRAPING UNIT COURSE RESERVE FOR 1 PROFILE SCRAPER WITH PRE-WIRING AUTO-SENSING SCRAPING UNIT 08.50 TO REMOVE HOT MELT ADHESIVES FROM THE PERIPHERY OF WORKPIECE UPPER AND SUBPAGES, CONTROLLABLE, WITH 2 CUTTING PLATES, WORKPIECE RECUSAL MIN WITH 2 AIR NOZZLES TO CLEAN BLOW OF THE SCRAPER 30 MM COURSE RESERVE FOR DETERGENT INDICATION WITH PRE-WIRING FASSCHLEIF/BUFFING UNIT 08.612, NOT OSCILLATING, AFTER CLEANING THE TOP AND BOTTOM FLUSH MILLED KANTENMATERIALES OR THICK EDGES, POLISHING PIVOTS ON A VERTICAL AND HORIZONTAL AXIS WITH 2 MOTORS 0.25 KW, 230/400V, 50 HZ, 1500 RPM. WITH 1 POLISHING WHEEL DIAMETER. 40 X 200 X 18 HEIGHT 235 MM PNEUMATIC RELEASE DEVICE FOR THE BUFFING UNIT 08.612 1 SET OF SCHWABBELSCHEIBEN2 ST FOR THE AFOREMENTIONED BUFFING UNIT 08.612 RUNNING IN STICKY-BRITE COMPLETE WITH MOUNTS SMOOTHNESS AGGREGATE 08.53 TO SMOOTH THE MILLED AND DRAWN OUT PVC/ABS PROFILE EDGE, FOR R = 1,3-4 MM, 1 UPPER AND 1 LOWER SMOOTHNESS ZONE, MIN. WORKPIECE THICKNESS WITH HORIZONTAL PNEUMATIC CLUTCH DEVICE 16 MM MACHINE IS STILL CONNECTED AND CAN BE SEEN IN OPERATION. SALE FROM LOCATION NEAR STUTTGART THE TECHNICAL DESCRIPTION COMES FROM THE ORIGINAL-FROM THE MANUFACTURER HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE DELIVERY: FROM SITE'S TERMS & CONDITIONS APPLY
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-:ll 550 | ll 750 | ll950 <br/>turning diameter:550 | 750 | 950 mm<br/>turning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mm<br/>control:siemens/fanuc/fagor <br/>center height over bed:475|575|675 mm<br/>bed width:990 mm<br/>spindle bore:153/230/305/405 mm<br/>spindle nose:a2-11/a2-15/a2-20/a2-28 <br/>spindle speed:9-600/9-500/7-400/5-250  u/min<br/>spindle taper:6 mk<br/>spindle drive:22/26 (30/37 opt.) kw<br/>tool turret:4/8/12 hydraulisch oder elektrisch <br/>tool holder -shaft diameter:32 (40 opt.) mm<br/>tailstock quill diameter:165|200 mm<br/>tailstock quill adjustment:250 mm<br/>taper in tailstock:6 mk<br/>tailstock movement:über motor <br/>travel -x axis:370 | 480  mm<br/>travel - z:= spitzenweite mm<br/>servo motor x-axis:3 | 4 kw<br/>servo motor z-axis:4 | 7  kw<br/>rapid power traverse in x-and z direction:5/4 m/min<br/>hydraulic motor:2,2 (2,9 opt.) kw<br/>coolant pump drive:3 (15 opt.) | 15 bar<br/>weight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2/33 t<br/>machine length:5470/6470 /7470 /8470/9470/10470/11470/12470  mm<br/>machine width/height:3250 x 2370|3450 x 2370 mm<br/>max. workpiece weight -without tailstock:2000/2200/2400|2000/2200/2400|2200/2400/2600  kg<br/>max. workpiece weight between centres:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 kg<br/>workpiece weight in steadies max.:mit einer lünette:7000/8000/9000|mit einer lünette:7000/8000/9000|mit einer lünette:8000/9000/10000 kg<br/>workpiece weight in steadies max.:mit zwei lünetten:8888/9000/10000| mit zwei lünetten: 9000/10000/11000  kg<br/>turret:8-pos (12 pos) <br/>bed all of one piece and solid cast:monoblock-ausführung mit 5 führungsbahnen <br/>motorized tailstock: <br/>chip conveyor: <br/>cnc controller:siemens/fanuc/fagor <br/>: <br/>mpg hand wheel: <br/>levellig elements: <br/>tools: <br/>: <br/>halogen lamp: <br/>: <br/>ce-certificate: <br/>c-axis: <br/>y-axis: <br/>b-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests:manuell oder hydraulisch <br/>atc: <br/>boring bar holder: <br/>linear scales: <br/><br/>   5 bed way heavy duty cnc lathe  ll series  the new model \ :LL 550 | LL 750 | LL950
TURNING DIAMETER:550 | 750 | 950 MM
TURNING LENGTH:3000/4000/5000/6000/7000/8000/9000/12000/14000 MM
CONTROL:SIEMENS/FANUC/FAGOR
CENTER HEIGHT OVER BED:475|575|675 MM
BED WIDTH:990 MM
SPINDLE BORE:153/230/305/405 MM
SPINDLE NOSE:A2-11/A2-15/A2-20/A2-28
SPINDLE SPEED:9-600/9-500/7-400/5-250 U/MIN
SPINDLE TAPER:6 MK
SPINDLE DRIVE:22/26 (30/37 OPT.) KW
TOOL TURRET:4/8/12 HYDRAULISCH ODER ELEKTRISCH
TOOL HOLDER -SHAFT DIAMETER:32 (40 OPT.) MM
TAILSTOCK QUILL DIAMETER:165|200 MM
TAILSTOCK QUILL ADJUSTMENT:250 MM
TAPER IN TAILSTOCK:6 MK
TAILSTOCK MOVEMENT:üBER MOTOR
TRAVEL -X AXIS:370 | 480 MM
TRAVEL - Z:= SPITZENWEITE MM
SERVO MOTOR X-AXIS:3 | 4 KW
SERVO MOTOR Z-AXIS:4 | 7 KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:5/4 M/MIN
HYDRAULIC MOTOR:2,2 (2,9 OPT.) KW
COOLANT PUMP DRIVE:3 (15 OPT.) | 15 BAR
WEIGHT OF THE MACHINE CA.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2/33 T
MACHINE LENGTH:5470/6470 /7470 /8470/9470/10470/11470/12470 MM
MACHINE WIDTH/HEIGHT:3250 X 2370|3450 X 2370 MM
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK:2000/2200/2400|2000/2200/2400|2200/2400/2600 KG
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:8000/9000/10000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT ZWEI LüNETTEN:8888/9000/10000| MIT ZWEI LüNETTEN: 9000/10000/11000 KG
TURRET:8-POS (12 POS)
BED ALL OF ONE PIECE AND SOLID CAST:MONOBLOCK-AUSFüHRUNG MIT 5 FüHRUNGSBAHNEN
MOTORIZED TAILSTOCK:
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:
MPG HAND WHEEL:
LEVELLIG ELEMENTS:
TOOLS:
:
HALOGEN LAMP:
:
CE-CERTIFICATE:
C-AXIS:
Y-AXIS:
B-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:MANUELL ODER HYDRAULISCH
ATC:
BORING BAR HOLDER:
LINEAR SCALES:

5 BED WAY HEAVY DUTY CNC LATHE LL SERIES THE NEW MODEL \"LL\" SERIES IS DESIGNED FOR COMBINING MORE ADVANTAGE AND EVOLUTIONARY LARGE CNC LATHES. ESPECIALLY IDEAL FOR TURNING LONG SHAFT AND HOLLOW TUBES, IT OVERCOMES THE INTERFERENCE BETWEEN CARRIAGE AND STEADY RESTS COMPLETELY. IN ORDER TO INTEGRATE THE RIGIDITY OF A FLAT BED LATHE WITH THE ADVANTAGES OF A SLANT BED LATHE, TUSCAN HAVE CREATED A BRAND NEW CONSTRUCTION : THE 5 BED WAY HEAVY DUTY CNC LATHE. THE LL SERIES INTEGRATES THE ADVANTAGES OF SUPER RIGIDITY, HIGH EFFICIENCY AND PERFECT ACCURACY, IN ONE MACHINE. MAXIMUM CUTTING DIAMETER: 950MM. BETWEEN CENTRES: 4000MM - 8000MM. BED WIDTH: 990MM. SPINDLE BORE: 153MM, 230MM, 305MM. DOUBLE CHUCK IS AVAILABLE. MILLING FUNCTION IS OPTIONAL. RIGID AS A FLAT BED LATHE AND EFFICIENT AS A SLANT BED. NO INTERFERENCE. COMPACT TO SAVE SPACE. ECONOMIC. LARGER WORKING CAPACITY.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-:ll-1250 | ll-1450 | ll-1650 <br/>turning diameter:1250 | 1450 | 1650 mm<br/>turning length:5000/6000/7000/8000/9000/12000/14000/16000 mm<br/>control:siemens/fanuc/fagor <br/>center height over bed:705|805|905 mm<br/>width of cross cariage:600 mm<br/>bed width:1370 mm<br/>spindle bore:200 mm<br/>spindle nose:a2-15/a2-15/a2-20/a2-28 <br/>spindle speed:4-400  u/min<br/>spindle taper:6 mk<br/>spindle drive:22/26 (30/37 opt.) kw<br/>tool turret:4/8/12 hydraulisch oder elektrisch <br/>tool holder -shaft diameter:40 mm<br/>tailstock quill diameter:300 mm<br/>tailstock quill adjustment:250 mm<br/>taper in tailstock:7 mk<br/>tailstock movement:über motor (zahnstangenantrieb) <br/>travel -x axis:755 mm<br/>travel - z:= spitzenweite mm<br/>servo motor x-axis:4 kw<br/>servo motor z-axis:7 kw<br/>rapid power traverse in x-and z direction:5 m/min<br/>hydraulic motor:1,4 (ab 9m: 3,6) kw<br/>coolant pump drive:15 bar<br/>weight of the machine ca.:auf anfrage <br/>machine length:15150/16150/17150/18150/19150/20150 mm<br/>machine width/height:auf anfrage <br/>max. workpiece weight -without tailstock:2000/2200/2400|2000/2200/2400|2200/2400/2600  kg<br/>max. workpiece weight between centres:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 kg<br/>workpiece weight in steadies max.:mit einer lünette:7000/8000/9000|mit einer lünette:7000/8000/9000|mit einer lünette:8000/9000/10000 kg<br/>workpiece weight in steadies max.:mit zwei lünetten:8888/9000/10000| mit zwei lünetten: 9000/10000/11000  kg<br/>turret:4-pos (12 pos) <br/>bed all of one piece and solid cast:monoblock-ausführung mit 5 führungsbahnen <br/>motorized tailstock: <br/>chip conveyor: <br/>cnc controller:siemens/fanuc/fagor <br/>:2 türen vorne und hinten durchgehende wand <br/>mpg hand wheel: <br/>levellig elements: <br/>tools: <br/>: <br/>halogen lamp: <br/>: <br/>ce-certificate: <br/>c-axis: <br/>y-axis: <br/>b-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>steady rests:manuell oder hydraulisch <br/>atc: <br/>boring bar holder: <br/>linear scales: <br/><br/>   5 bed way heavy duty cnc lathe  ll series  the new model \ :LL-1250 | LL-1450 | LL-1650
TURNING DIAMETER:1250 | 1450 | 1650 MM
TURNING LENGTH:5000/6000/7000/8000/9000/12000/14000/16000 MM
CONTROL:SIEMENS/FANUC/FAGOR
CENTER HEIGHT OVER BED:705|805|905 MM
WIDTH OF CROSS CARIAGE:600 MM
BED WIDTH:1370 MM
SPINDLE BORE:200 MM
SPINDLE NOSE:A2-15/A2-15/A2-20/A2-28
SPINDLE SPEED:4-400 U/MIN
SPINDLE TAPER:6 MK
SPINDLE DRIVE:22/26 (30/37 OPT.) KW
TOOL TURRET:4/8/12 HYDRAULISCH ODER ELEKTRISCH
TOOL HOLDER -SHAFT DIAMETER:40 MM
TAILSTOCK QUILL DIAMETER:300 MM
TAILSTOCK QUILL ADJUSTMENT:250 MM
TAPER IN TAILSTOCK:7 MK
TAILSTOCK MOVEMENT:üBER MOTOR (ZAHNSTANGENANTRIEB)
TRAVEL -X AXIS:755 MM
TRAVEL - Z:= SPITZENWEITE MM
SERVO MOTOR X-AXIS:4 KW
SERVO MOTOR Z-AXIS:7 KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:5 M/MIN
HYDRAULIC MOTOR:1,4 (AB 9M: 3,6) KW
COOLANT PUMP DRIVE:15 BAR
WEIGHT OF THE MACHINE CA.:AUF ANFRAGE
MACHINE LENGTH:15150/16150/17150/18150/19150/20150 MM
MACHINE WIDTH/HEIGHT:AUF ANFRAGE
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK:2000/2200/2400|2000/2200/2400|2200/2400/2600 KG
MAX. WORKPIECE WEIGHT BETWEEN CENTRES:6000/7000/8000 |6000/7000/8000 |7000/8000/9000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:7000/8000/9000|MIT EINER LüNETTE:8000/9000/10000 KG
WORKPIECE WEIGHT IN STEADIES MAX.:MIT ZWEI LüNETTEN:8888/9000/10000| MIT ZWEI LüNETTEN: 9000/10000/11000 KG
TURRET:4-POS (12 POS)
BED ALL OF ONE PIECE AND SOLID CAST:MONOBLOCK-AUSFüHRUNG MIT 5 FüHRUNGSBAHNEN
MOTORIZED TAILSTOCK:
CHIP CONVEYOR:
CNC CONTROLLER:SIEMENS/FANUC/FAGOR
:2 TüREN VORNE UND HINTEN DURCHGEHENDE WAND
MPG HAND WHEEL:
LEVELLIG ELEMENTS:
TOOLS:
:
HALOGEN LAMP:
:
CE-CERTIFICATE:
C-AXIS:
Y-AXIS:
B-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
STEADY RESTS:MANUELL ODER HYDRAULISCH
ATC:
BORING BAR HOLDER:
LINEAR SCALES:

5 BED WAY HEAVY DUTY CNC LATHE LL SERIES THE NEW MODEL \"LL\" SERIES IS DESIGNED FOR COMBINING MORE ADVANTAGE AND EVOLUTIONARY LARGE CNC LATHES. ESPECIALLY IDEAL FOR TURNING LONG SHAFT AND HOLLOW TUBES, IT OVERCOMES THE INTERFERENCE BETWEEN CARRIAGE AND STEADY RESTS COMPLETELY. IN ORDER TO INTEGRATE THE RIGIDITY OF A FLAT BED LATHE WITH THE ADVANTAGES OF A SLANT BED LATHE, TUSCAN HAVE CREATED A BRAND NEW CONSTRUCTION : THE 5 BED WAY HEAVY DUTY CNC LATHE. THE LL SERIES INTEGRATES THE ADVANTAGES OF SUPER RIGIDITY, HIGH EFFICIENCY AND PERFECT ACCURACY, IN ONE MACHINE. DOUBLE CHUCK IS AVAILABLE. MILLING AND BORING FUNCTION IS OPTIONAL, ALSO SIMOULTANOUSLY. RIGID AS A FLAT BED LATHE AND EFFICIENT AS A SLANT BED. NO INTERFERENCE. COMPACT TO SAVE SPACE. ECONOMIC. LARGER WORKING CAPACITY.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-tool length - max.: 3200 mm<br/>floor-plate width: 3200 mm<br/>sheet thickness - max.: 6 mm<br/>stroke max.: 300 mm<br/>hollow: 400 mm<br/>angle: 0-135 °<br/>drive: 22,5 kw<br/>total power requirement:  kw<br/>weight of the machine ca.: 12 t<br/>dimensions of the machine ca.: 14,7x5,7x3,9 m<br/>an innovative bending machine with oscillating double table allows one<br/>fast, automatic and economical production of trapezoidal sheets for<br/>the shipbuilding.<br/><br/>the davi promau bending machine davi mfd (machine folding double) is rightly so<br/>referred to as novel: in essence, it resembles already known<br/>bending machines with oscillating table, but just in detail, the<br/>davi promaus machine has many innovative features on it, according to its <br/>manufacturer<br/>to higher performance than conventional bending machines<br/>it is possible. decisive here is the new concept of bending machine and<br/>automation. this unit is the basis for an fms bending system that<br/>exceptional production and reduced production costs<br/>guarantee. the mfd is mainly for the machining of medium sized<br/>and large sheets of mild steel designed. the clever bending mechanism<br/>with the possibility of the sheet in a single clamping both up and<br/>to bend downwards, allows the bending of parts of different<br/>sizes and masses. thanks to the two tables, the machine can immediately from one<br/>go over to the other bending type.<br/><br/>simplified sheet metal handling<br/>with a built-in table drehanipulator the sheet metal in all<br/>be rotated at any angle positions, such as the lateral edges<br/>to bend the sheet. the entire sheet movement takes place automatically. the<br/>the operator therefore only has to position the pallets with the raw sheet and <br/>the<br/>remove finished parts. so far required work steps like positioning<br/>or turning around and turning the sheet completely eliminated - an advantage, <br/>because<br/>just for turning the sheets, with often considerable sheet metal weight, were<br/>so far often multiple operators and / or a crane required, because even at<br/>the robot joint was able to achieve the required high<br/>do not apply torques for turning the metal sheets. the davi<br/>mfd bending machine was designed for two-sided bending of up to 4,100 mm long<br/>and 8 mm thick sheets. with the drehanipulator can<br/>sheet metal plates automatically rotated in all directions without operator <br/>intervention<br/>become.<br/><br/>market success<br/>the bending machine has, according to davi promau in various markets, such as <br/>in the<br/>united states and northern europe, already well received.<br/>she is valued mainly because of her reduced personnel expenses, the<br/>short cycle times and above all because of the great flexibility that over the<br/>software allows the transition from one bending angle to another, without<br/>that die or bending tool must be changed. according to davi it ??is<br/>mfd is an exclusive machine: »no other italian<br/>the manufacturer is currently producing similar machines, says the company. in<br/>europe is only a similar machine model produced in germany, the<br/>but only has an oscillating table (although this for the<br/>double function upper and lower table is usable). the bending machine is with<br/>oscillating double table and 9 cnc axes for machining up to 4,100 mm<br/>wide and 9 mm thick sheet metal plates equipped.<br/><br/>machine features<br/>both oscillating tables are equipped with a hold-down table, a rear<br/>support table and a manipulator for the positioning of the metal sheets<br/>fitted. it has collets for the exact positioning of the<br/>sheet metal plate under the bending tools. stephen lowe, product manager of<br/>manufacturer explains: »the main feature of this innovative unit lies<br/>in that the bend can be made up and down without<br/>that while the sheets, as in conventional bending presses, turned over by hand<br/>need to become. because of this advantage, the machine becomes a novelty in the<br/>bending sector represents, of many american and northern european<br/>companies. the davi mfd is designed for the production of thin and<br/>medium-strength structural steel products such as doors, cabinets,<br/>metal fixtures, shelves, kitchens, switchboards, etc., but also for<br/>6 to 8 mm thick kastenprofi le designed and was as flexible<br/>production system fms designed. the bending system has an automatic<br/>sheet feeder, a tafelvorschub- / turntable (manipulator) and a<br/>outfeed and stacking system for the discharge and subsequent stacking of<br/>finished sheet metal parts. the control is done with the nc system »genius«, <br/>that of<br/>davi promau was developed. in the fms version all can<br/>processing steps can be managed with this control, without a<br/>simulation of the duty cycle or a teach-in are required. this<br/>allows a much faster creation of the machine program. at<br/>thickness or material changes will be valuable set-up time for the<br/>machine saved, since neither the tools nor the collets of the manipulator<br/>have to be replaced.<br/><br/><br/><br/><br/><br/> TOOL LENGTH - MAX.: 3200 MM
FLOOR-PLATE WIDTH: 3200 MM
SHEET THICKNESS - MAX.: 6 MM
STROKE MAX.: 300 MM
HOLLOW: 400 MM
ANGLE: 0-135 °
DRIVE: 22,5 KW
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 12 T
DIMENSIONS OF THE MACHINE CA.: 14,7X5,7X3,9 M
AN INNOVATIVE BENDING MACHINE WITH OSCILLATING DOUBLE TABLE ALLOWS ONE
FAST, AUTOMATIC AND ECONOMICAL PRODUCTION OF TRAPEZOIDAL SHEETS FOR
THE SHIPBUILDING.

THE DAVI PROMAU BENDING MACHINE DAVI MFD (MACHINE FOLDING DOUBLE) IS RIGHTLY SO
REFERRED TO AS NOVEL: IN ESSENCE, IT RESEMBLES ALREADY KNOWN
BENDING MACHINES WITH OSCILLATING TABLE, BUT JUST IN DETAIL, THE
DAVI PROMAUS MACHINE HAS MANY INNOVATIVE FEATURES ON IT, ACCORDING TO ITS
MANUFACTURER
TO HIGHER PERFORMANCE THAN CONVENTIONAL BENDING MACHINES
IT IS POSSIBLE. DECISIVE HERE IS THE NEW CONCEPT OF BENDING MACHINE AND
AUTOMATION. THIS UNIT IS THE BASIS FOR AN FMS BENDING SYSTEM THAT
EXCEPTIONAL PRODUCTION AND REDUCED PRODUCTION COSTS
GUARANTEE. THE MFD IS MAINLY FOR THE MACHINING OF MEDIUM SIZED
AND LARGE SHEETS OF MILD STEEL DESIGNED. THE CLEVER BENDING MECHANISM
WITH THE POSSIBILITY OF THE SHEET IN A SINGLE CLAMPING BOTH UP AND
TO BEND DOWNWARDS, ALLOWS THE BENDING OF PARTS OF DIFFERENT
SIZES AND MASSES. THANKS TO THE TWO TABLES, THE MACHINE CAN IMMEDIATELY FROM ONE
GO OVER TO THE OTHER BENDING TYPE.

SIMPLIFIED SHEET METAL HANDLING
WITH A BUILT-IN TABLE DREHANIPULATOR THE SHEET METAL IN ALL
BE ROTATED AT ANY ANGLE POSITIONS, SUCH AS THE LATERAL EDGES
TO BEND THE SHEET. THE ENTIRE SHEET MOVEMENT TAKES PLACE AUTOMATICALLY. THE
THE OPERATOR THEREFORE ONLY HAS TO POSITION THE PALLETS WITH THE RAW SHEET AND
THE
REMOVE FINISHED PARTS. SO FAR REQUIRED WORK STEPS LIKE POSITIONING
OR TURNING AROUND AND TURNING THE SHEET COMPLETELY ELIMINATED - AN ADVANTAGE,
BECAUSE
JUST FOR TURNING THE SHEETS, WITH OFTEN CONSIDERABLE SHEET METAL WEIGHT, WERE
SO FAR OFTEN MULTIPLE OPERATORS AND / OR A CRANE REQUIRED, BECAUSE EVEN AT
THE ROBOT JOINT WAS ABLE TO ACHIEVE THE REQUIRED HIGH
DO NOT APPLY TORQUES FOR TURNING THE METAL SHEETS. THE DAVI
MFD BENDING MACHINE WAS DESIGNED FOR TWO-SIDED BENDING OF UP TO 4,100 MM LONG
AND 8 MM THICK SHEETS. WITH THE DREHANIPULATOR CAN
SHEET METAL PLATES AUTOMATICALLY ROTATED IN ALL DIRECTIONS WITHOUT OPERATOR
INTERVENTION
BECOME.

MARKET SUCCESS
THE BENDING MACHINE HAS, ACCORDING TO DAVI PROMAU IN VARIOUS MARKETS, SUCH AS
IN THE
UNITED STATES AND NORTHERN EUROPE, ALREADY WELL RECEIVED.
SHE IS VALUED MAINLY BECAUSE OF HER REDUCED PERSONNEL EXPENSES, THE
SHORT CYCLE TIMES AND ABOVE ALL BECAUSE OF THE GREAT FLEXIBILITY THAT OVER THE
SOFTWARE ALLOWS THE TRANSITION FROM ONE BENDING ANGLE TO ANOTHER, WITHOUT
THAT DIE OR BENDING TOOL MUST BE CHANGED. ACCORDING TO DAVI IT ??IS
MFD IS AN EXCLUSIVE MACHINE: »NO OTHER ITALIAN
THE MANUFACTURER IS CURRENTLY PRODUCING SIMILAR MACHINES, SAYS THE COMPANY. IN
EUROPE IS ONLY A SIMILAR MACHINE MODEL PRODUCED IN GERMANY, THE
BUT ONLY HAS AN OSCILLATING TABLE (ALTHOUGH THIS FOR THE
DOUBLE FUNCTION UPPER AND LOWER TABLE IS USABLE). THE BENDING MACHINE IS WITH
OSCILLATING DOUBLE TABLE AND 9 CNC AXES FOR MACHINING UP TO 4,100 MM
WIDE AND 9 MM THICK SHEET METAL PLATES EQUIPPED.

MACHINE FEATURES
BOTH OSCILLATING TABLES ARE EQUIPPED WITH A HOLD-DOWN TABLE, A REAR
SUPPORT TABLE AND A MANIPULATOR FOR THE POSITIONING OF THE METAL SHEETS
FITTED. IT HAS COLLETS FOR THE EXACT POSITIONING OF THE
SHEET METAL PLATE UNDER THE BENDING TOOLS. STEPHEN LOWE, PRODUCT MANAGER OF
MANUFACTURER EXPLAINS: »THE MAIN FEATURE OF THIS INNOVATIVE UNIT LIES
IN THAT THE BEND CAN BE MADE UP AND DOWN WITHOUT
THAT WHILE THE SHEETS, AS IN CONVENTIONAL BENDING PRESSES, TURNED OVER BY HAND
NEED TO BECOME. BECAUSE OF THIS ADVANTAGE, THE MACHINE BECOMES A NOVELTY IN THE
BENDING SECTOR REPRESENTS, OF MANY AMERICAN AND NORTHERN EUROPEAN
COMPANIES. THE DAVI MFD IS DESIGNED FOR THE PRODUCTION OF THIN AND
MEDIUM-STRENGTH STRUCTURAL STEEL PRODUCTS SUCH AS DOORS, CABINETS,
METAL FIXTURES, SHELVES, KITCHENS, SWITCHBOARDS, ETC., BUT ALSO FOR
6 TO 8 MM THICK KASTENPROFI LE DESIGNED AND WAS AS FLEXIBLE
PRODUCTION SYSTEM FMS DESIGNED. THE BENDING SYSTEM HAS AN AUTOMATIC
SHEET FEEDER, A TAFELVORSCHUB- / TURNTABLE (MANIPULATOR) AND A
OUTFEED AND STACKING SYSTEM FOR THE DISCHARGE AND SUBSEQUENT STACKING OF
FINISHED SHEET METAL PARTS. THE CONTROL IS DONE WITH THE NC SYSTEM »GENIUS«,
THAT OF
DAVI PROMAU WAS DEVELOPED. IN THE FMS VERSION ALL CAN
PROCESSING STEPS CAN BE MANAGED WITH THIS CONTROL, WITHOUT A
SIMULATION OF THE DUTY CYCLE OR A TEACH-IN ARE REQUIRED. THIS
ALLOWS A MUCH FASTER CREATION OF THE MACHINE PROGRAM. AT
THICKNESS OR MATERIAL CHANGES WILL BE VALUABLE SET-UP TIME FOR THE
MACHINE SAVED, SINCE NEITHER THE TOOLS NOR THE COLLETS OF THE MANIPULATOR
HAVE TO BE REPLACED.





Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-number of spindles: 6 st.<br/>working width: 230 mm<br/>working height: 120 mm<br/>length of the planing table: 2000 mm<br/>feed motor: 3 kw<br/>feed speed: 5-30 m/min.<br/>control: cnc <br/>weinig powermat 500 for window production with strip separation<br/>-------------------------------------------------- ---------------------<br/><br/>executive summary:<br/>-------------------------------------------------- ---------------------<br/>6 spindles hsk / powerlock with 7.5 kw and 8000 u / min each<br/>window package with glazing bead removal<br/>width, height and feed controlled by memory function<br/><br/><br/>detailed description:<br/>-------------------------------------------------- ---------------------<br/><br/>technical specifications:<br/>-------------------------<br/>working width 20 - 230 mm (with tool circle 93 - 125 mm)<br/>working height 8 - 120 mm (with tool circle 93 - 125 mm)<br/><br/>1. tool holder powerlock / hsk<br/>------------------------------<br/>first lower tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 125 - 180 mm<br/>in conjunction with powerlock 93 - 180 mm<br/>tool circle fold cutters 130-160 mm<br/>adjustment axial 17 mm<br/>folding device<br/>marathoncoating in front of 1st lower tool holder<br/><br/>2. tool holder powerlock / hsk<br/>------------------------------<br/>first right tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for spindle 80 mm<br/>adjustment axial for powerlock 55 mm<br/>adjustment radial<br/>min. tool diameter at stop level 93 mm<br/>max. tool diameter behind stop level 200 mm<br/>electronic digital display for radial adjustment<br/>electronic digital display for axial adjustment<br/><br/>3. tool holder powerlock / hsk<br/>------------------------------<br/>first left tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial for spindle 80 mm<br/>adjustment axial for powerlock 55 mm<br/><br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>4. tool holder powerlock / hsk<br/>------------------------------<br/>first upper tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>5. tool holder powerlock / hsk<br/>------------------------------<br/>second upper tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 200 mm<br/>tool circle for straight cutter heads max. 163 mm<br/>maximum throat depth 35 mm<br/>adjustment axial 40 mm<br/>motorized axis adjustment radially via memory control<br/>electronic digital display for axial adjustment<br/><br/>6. tool holder powerlock / hsk<br/>------------------------------<br/>second lower tool holder<br/>motor with brake 7.5 kw<br/>speed 8,000 rpm<br/>including high performance ball bearings<br/>tool circle 93 - 225 mm<br/>maximum throat depth 15 mm<br/>adjustment axial 40 mm<br/>adjustment radial<br/>min. tool diameter to the table level 93 mm<br/>max. tool diameter 6 mm below table level 225 mm<br/>electronic digital display for radial adjustment<br/>electronic digital display for axial adjustment<br/><br/>all tool holders with high concentricity.<br/>lubrication points for the axial tool receiving movement.<br/><br/>feed system<br/>------------------------------<br/>frequency-controlled feed, 5 - 30 m / min.<br/>steplessly adjustable with brake 3 kw<br/>feed roller before 1. lower tool<br/>pneumatically controlled high-low<br/>durofer pointed toothed rollers (weinig patent)<br/>with depth limiter and self-cleaning<br/>adjustment of the feed rollers opposite<br/>left tool holder, axial 35 mm<br/><br/>cnc-controlled adjustment and positioning of the feed high / low in<br/>connection with the memory function<br/><br/>electrical machinery<br/>------------------------------<br/>operating voltage 400 volts<br/>(voltage range 380 x 420 volts), 50 hz<br/>electrical design according to din vde 0113,<br/>electrical equipment of industrial machinery<br/>en60204, iec-204-1. further electrical regulations<br/>are not included.<br/>control cabinet (with control panel) separate from<br/>machine, distance control cabinet machine: 2.5 m<br/><br/>machine stand, table and stops<br/>------------------------------<br/>table 2 m long (incl.<br/>manual waxilitpumpe for tischentarzung.<br/>a powered rubber roller in the exit table,<br/>50 mm wide.<br/><br/>pressure rollers and guides<br/>------------------------------<br/>pressure rollers from above, sprung<br/>lateral pressure roller on infeed table, sprung<br/><br/>machine operation<br/>------------------------------<br/>memory function<br/>to save the setting values of profiles.<br/>tool holder axes and pressure elements before and after<br/>the upper tool holder with<br/>electronic double ads.<br/>function:<br/>- save the settings of the manufactured profile by pressing a button<br/>under a profile number<br/>- when selecting the profile number again, the electronic<br/>double - display the setting values<br/>- by manually adjusting the tool holders and the<br/>print items are matched the ads<br/>- 99 memory locations<br/><br/>3 radial cnc-controlled adjustment and positioning of the tool holders<br/>in conjunction with memory function, spindle no. 3,4,5<br/><br/>cnc - controlled adjustment and positioning of the feed<br/>high / low in conjunction with the memory function<br/><br/>safety and sound insulation<br/>------------------------------<br/>safety - full fairing<br/>easily foldable safety hood with window covers<br/>the entire work area and protects against mechanical<br/>hazards.<br/>when lifting the safety hood tool holders<br/>and feed automatically switched off.<br/>for ce version, the safety cover is opened during<br/>of automatic mode not possible.<br/>electromagnetic locking of the safety hood<br/>(only after the tools have come to a standstill, approx. 15 seconds,<br/>can the hood be opened)<br/>the machine comes with ce mark and its associated<br/>ec declaration of conformity delivered.<br/>interior light in the safety hood<br/>for ripping works e.g. sawing and multiple profiling,<br/>you need suitable protection devices.<br/><br/>option: planing heads + molding tools<br/><br/>(technical data according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/><br/> NUMBER OF SPINDLES: 6 ST.
WORKING WIDTH: 230 MM
WORKING HEIGHT: 120 MM
LENGTH OF THE PLANING TABLE: 2000 MM
FEED MOTOR: 3 KW
FEED SPEED: 5-30 M/MIN.
CONTROL: CNC
WEINIG POWERMAT 500 FOR WINDOW PRODUCTION WITH STRIP SEPARATION
-------------------------------------------------- ---------------------

EXECUTIVE SUMMARY:
-------------------------------------------------- ---------------------
6 SPINDLES HSK / POWERLOCK WITH 7.5 KW AND 8000 U / MIN EACH
WINDOW PACKAGE WITH GLAZING BEAD REMOVAL
WIDTH, HEIGHT AND FEED CONTROLLED BY MEMORY FUNCTION


DETAILED DESCRIPTION:
-------------------------------------------------- ---------------------

TECHNICAL SPECIFICATIONS:
-------------------------
WORKING WIDTH 20 - 230 MM (WITH TOOL CIRCLE 93 - 125 MM)
WORKING HEIGHT 8 - 120 MM (WITH TOOL CIRCLE 93 - 125 MM)

1. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LOWER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 125 - 180 MM
IN CONJUNCTION WITH POWERLOCK 93 - 180 MM
TOOL CIRCLE FOLD CUTTERS 130-160 MM
ADJUSTMENT AXIAL 17 MM
FOLDING DEVICE
MARATHONCOATING IN FRONT OF 1ST LOWER TOOL HOLDER

2. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST RIGHT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR SPINDLE 80 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER AT STOP LEVEL 93 MM
MAX. TOOL DIAMETER BEHIND STOP LEVEL 200 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

3. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST LEFT TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL FOR SPINDLE 80 MM
ADJUSTMENT AXIAL FOR POWERLOCK 55 MM

MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

4. TOOL HOLDER POWERLOCK / HSK
------------------------------
FIRST UPPER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

5. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND UPPER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 200 MM
TOOL CIRCLE FOR STRAIGHT CUTTER HEADS MAX. 163 MM
MAXIMUM THROAT DEPTH 35 MM
ADJUSTMENT AXIAL 40 MM
MOTORIZED AXIS ADJUSTMENT RADIALLY VIA MEMORY CONTROL
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

6. TOOL HOLDER POWERLOCK / HSK
------------------------------
SECOND LOWER TOOL HOLDER
MOTOR WITH BRAKE 7.5 KW
SPEED 8,000 RPM
INCLUDING HIGH PERFORMANCE BALL BEARINGS
TOOL CIRCLE 93 - 225 MM
MAXIMUM THROAT DEPTH 15 MM
ADJUSTMENT AXIAL 40 MM
ADJUSTMENT RADIAL
MIN. TOOL DIAMETER TO THE TABLE LEVEL 93 MM
MAX. TOOL DIAMETER 6 MM BELOW TABLE LEVEL 225 MM
ELECTRONIC DIGITAL DISPLAY FOR RADIAL ADJUSTMENT
ELECTRONIC DIGITAL DISPLAY FOR AXIAL ADJUSTMENT

ALL TOOL HOLDERS WITH HIGH CONCENTRICITY.
LUBRICATION POINTS FOR THE AXIAL TOOL RECEIVING MOVEMENT.

FEED SYSTEM
------------------------------
FREQUENCY-CONTROLLED FEED, 5 - 30 M / MIN.
STEPLESSLY ADJUSTABLE WITH BRAKE 3 KW
FEED ROLLER BEFORE 1. LOWER TOOL
PNEUMATICALLY CONTROLLED HIGH-LOW
DUROFER POINTED TOOTHED ROLLERS (WEINIG PATENT)
WITH DEPTH LIMITER AND SELF-CLEANING
ADJUSTMENT OF THE FEED ROLLERS OPPOSITE
LEFT TOOL HOLDER, AXIAL 35 MM

CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED HIGH / LOW IN
CONNECTION WITH THE MEMORY FUNCTION

ELECTRICAL MACHINERY
------------------------------
OPERATING VOLTAGE 400 VOLTS
(VOLTAGE RANGE 380 X 420 VOLTS), 50 HZ
ELECTRICAL DESIGN ACCORDING TO DIN VDE 0113,
ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINERY
EN60204, IEC-204-1. FURTHER ELECTRICAL REGULATIONS
ARE NOT INCLUDED.
CONTROL CABINET (WITH CONTROL PANEL) SEPARATE FROM
MACHINE, DISTANCE CONTROL CABINET MACHINE: 2.5 M

MACHINE STAND, TABLE AND STOPS
------------------------------
TABLE 2 M LONG (INCL.
MANUAL WAXILITPUMPE FOR TISCHENTARZUNG.
A POWERED RUBBER ROLLER IN THE EXIT TABLE,
50 MM WIDE.

PRESSURE ROLLERS AND GUIDES
------------------------------
PRESSURE ROLLERS FROM ABOVE, SPRUNG
LATERAL PRESSURE ROLLER ON INFEED TABLE, SPRUNG

MACHINE OPERATION
------------------------------
MEMORY FUNCTION
TO SAVE THE SETTING VALUES OF PROFILES.
TOOL HOLDER AXES AND PRESSURE ELEMENTS BEFORE AND AFTER
THE UPPER TOOL HOLDER WITH
ELECTRONIC DOUBLE ADS.
FUNCTION:
- SAVE THE SETTINGS OF THE MANUFACTURED PROFILE BY PRESSING A BUTTON
UNDER A PROFILE NUMBER
- WHEN SELECTING THE PROFILE NUMBER AGAIN, THE ELECTRONIC
DOUBLE - DISPLAY THE SETTING VALUES
- BY MANUALLY ADJUSTING THE TOOL HOLDERS AND THE
PRINT ITEMS ARE MATCHED THE ADS
- 99 MEMORY LOCATIONS

3 RADIAL CNC-CONTROLLED ADJUSTMENT AND POSITIONING OF THE TOOL HOLDERS
IN CONJUNCTION WITH MEMORY FUNCTION, SPINDLE NO. 3,4,5

CNC - CONTROLLED ADJUSTMENT AND POSITIONING OF THE FEED
HIGH / LOW IN CONJUNCTION WITH THE MEMORY FUNCTION

SAFETY AND SOUND INSULATION
------------------------------
SAFETY - FULL FAIRING
EASILY FOLDABLE SAFETY HOOD WITH WINDOW COVERS
THE ENTIRE WORK AREA AND PROTECTS AGAINST MECHANICAL
HAZARDS.
WHEN LIFTING THE SAFETY HOOD TOOL HOLDERS
AND FEED AUTOMATICALLY SWITCHED OFF.
FOR CE VERSION, THE SAFETY COVER IS OPENED DURING
OF AUTOMATIC MODE NOT POSSIBLE.
ELECTROMAGNETIC LOCKING OF THE SAFETY HOOD
(ONLY AFTER THE TOOLS HAVE COME TO A STANDSTILL, APPROX. 15 SECONDS,
CAN THE HOOD BE OPENED)
THE MACHINE COMES WITH CE MARK AND ITS ASSOCIATED
EC DECLARATION OF CONFORMITY DELIVERED.
INTERIOR LIGHT IN THE SAFETY HOOD
FOR RIPPING WORKS E.G. SAWING AND MULTIPLE PROFILING,
YOU NEED SUITABLE PROTECTION DEVICES.

OPTION: PLANING HEADS + MOLDING TOOLS

(TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)





Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-waterjet - cutting machine, year 2017 as new
milling spindle, 2 heads, changing tables

3,800 bar - for cutting foams, plastics, textile, leather, cardboard, etc.

make: expert systems technology / thyssen uhde
type: cutexpert variojet
year of constr.: 2017

work area: 2,000 x 1.600 mm
max material thickness: 100 mm
rapid traverse max: 60 m / min
cutting nozzle diameter: 0.08 - 0.20 mm high pressure pump
make: uhde thyssenkrupp
type: hps 4022
pressure max: 3,800 bar
power: 22 kw

milling spindle
make: jã¤ger
maximum speed: 30,000 rpm

equipment / options:
-2 heads, 1 x with a milling spindle
-changing tables
-tables designed with va honeycomb elements
-including bagging filter
-including mobile compressor (metabo)
--program controlled height adjustment
-dxf import module
-nesting software module
-software module material database

footprint approximately: b = approx. 9 x 4 m, weight: 3500 kg

condition:
almost as good as new machine, comes from insolventem operation. 
delivered 10/2017, only about a year in operation.

price:
new price = (without installation) 232,000,-â?¬
requirement, net, from location north rhine-westphalia / germany
 WATERJET - CUTTING MACHINE, YEAR 2017 AS NEW MILLING SPINDLE, 2 HEADS, CHANGING TABLES 3,800 BAR - FOR CUTTING FOAMS, PLASTICS, TEXTILE, LEATHER, CARDBOARD, ETC. MAKE: EXPERT SYSTEMS TECHNOLOGY / THYSSEN UHDE TYPE: CUTEXPERT VARIOJET YEAR OF CONSTR.: 2017 WORK AREA: 2,000 X 1.600 MM MAX MATERIAL THICKNESS: 100 MM RAPID TRAVERSE MAX: 60 M / MIN CUTTING NOZZLE DIAMETER: 0.08 - 0.20 MM HIGH PRESSURE PUMP MAKE: UHDE THYSSENKRUPP TYPE: HPS 4022 PRESSURE MAX: 3,800 BAR POWER: 22 KW MILLING SPINDLE MAKE: J&ATILDE;&CURREN;GER MAXIMUM SPEED: 30,000 RPM EQUIPMENT / OPTIONS: -2 HEADS, 1 X WITH A MILLING SPINDLE -CHANGING TABLES -TABLES DESIGNED WITH VA HONEYCOMB ELEMENTS -INCLUDING BAGGING FILTER -INCLUDING MOBILE COMPRESSOR (METABO) --PROGRAM CONTROLLED HEIGHT ADJUSTMENT -DXF IMPORT MODULE -NESTING SOFTWARE MODULE -SOFTWARE MODULE MATERIAL DATABASE FOOTPRINT APPROXIMATELY: B = APPROX. 9 X 4 M, WEIGHT: 3500 KG CONDITION: ALMOST AS GOOD AS NEW MACHINE, COMES FROM INSOLVENTEM OPERATION. DELIVERED 10/2017, ONLY ABOUT A YEAR IN OPERATION. PRICE: NEW PRICE = (WITHOUT INSTALLATION) 232,000,-&ACIRC;?&NOT; REQUIREMENT, NET, FROM LOCATION NORTH RHINE-WESTPHALIA / GERMANY
Vendedor: 5m+ GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 450 mm<br/>y-travel: 200 mm<br/>z-travel: 400 mm<br/>spindle turning speed range: 66 - 2840 (vertikal) u/min<br/>tool taper: 30 sk<br/>table surface area: 860 x 240 mm<br/>power capacity - milling spindle: 2 / 2,6 kw<br/>spindle turning speed range: 30 - 1280 (horizontal) u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: 850 kg<br/>dimensions of the machine ca.: 1400 x 1900 x 1800 mm<br/>universal milling machine in combined horizontal / vertical design<br/><br/>the machine comes from a training center and is in good and clean condition.<br/>1. hand machine<br/>operating hours 7737 h<br/><br/>equipments:<br/>3-axis d.r.o. heidenhain nd 550, without measuring scales and cables!<br/>table can be swiveled by max. 45 deg<br/>vertical milling head on top slide 125 mm adjustable<br/>in vertical milling work<br/>milling head can be swiveled +/- 90 deg manually<br/>vertical head with retractable quill, quill stroke 60 mm<br/>automatic table feeds infinitely variable along 0-1000 mm / min.<br/>rapid traverse along 1000 mm / min (jog control)<br/>ball screw for longitudinal movement of the table (dc and reverse milling)<br/>coolant system<br/>central lubrication, manually operated<br/>chip collection tray<br/>the accessories are extensive<br/><br/><br/><br/><br/> X-TRAVEL: 450 MM
Y-TRAVEL: 200 MM
Z-TRAVEL: 400 MM
SPINDLE TURNING SPEED RANGE: 66 - 2840 (VERTIKAL) U/MIN
TOOL TAPER: 30 SK
TABLE SURFACE AREA: 860 X 240 MM
POWER CAPACITY - MILLING SPINDLE: 2 / 2,6 KW
SPINDLE TURNING SPEED RANGE: 30 - 1280 (HORIZONTAL) U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 850 KG
DIMENSIONS OF THE MACHINE CA.: 1400 X 1900 X 1800 MM
UNIVERSAL MILLING MACHINE IN COMBINED HORIZONTAL / VERTICAL DESIGN

THE MACHINE COMES FROM A TRAINING CENTER AND IS IN GOOD AND CLEAN CONDITION.
1. HAND MACHINE
OPERATING HOURS 7737 H

EQUIPMENTS:
3-AXIS D.R.O. HEIDENHAIN ND 550, WITHOUT MEASURING SCALES AND CABLES!
TABLE CAN BE SWIVELED BY MAX. 45 DEG
VERTICAL MILLING HEAD ON TOP SLIDE 125 MM ADJUSTABLE
IN VERTICAL MILLING WORK
MILLING HEAD CAN BE SWIVELED +/- 90 DEG MANUALLY
VERTICAL HEAD WITH RETRACTABLE QUILL, QUILL STROKE 60 MM
AUTOMATIC TABLE FEEDS INFINITELY VARIABLE ALONG 0-1000 MM / MIN.
RAPID TRAVERSE ALONG 1000 MM / MIN (JOG CONTROL)
BALL SCREW FOR LONGITUDINAL MOVEMENT OF THE TABLE (DC AND REVERSE MILLING)
COOLANT SYSTEM
CENTRAL LUBRICATION, MANUALLY OPERATED
CHIP COLLECTION TRAY
THE ACCESSORIES ARE EXTENSIVE




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-no. 04031

for sale on behalf of customer

4 - page-planer / profile milling machine weinig pfa 22 n 8 + 1

machine comes from the production of parquet

technical details according to weinig datasheet or previous owner

year of construction: 1976
8 spindles
1 hl dressing spindle, 40 mm, 5.5 kw, 6000 rpm
2. hl fã¼gespindel, 3 kw, 40 mm, 6000 rpm
3. hl vertical spindle left, 5.5 kw, 40 mm, 6000 rpm
4. hl vertical spindle right, 5.5 kw, 40 mm, 6000 rpm
5 hl horizontal spindle top 7,5 kw, 40 mm, 6000 rpm
6 horizontal spindle below, bearing, jointer, 5.5 kw, 40 mm, 6000 rpm
7 horizontal spindle below, bearing, jointer, 7.5 kw, 50 mm, 6000 rpm
8 universal spindle 4 kw, 40 mm, 6000 rpm

dressing table 2 m central adjustment 0.55 kw
universal feed 5.5 kw
transport rollers 1 4 spindle, 5-8 spindle
pneumatic pressure
after the fã¼gespindel additional pendant
table top front left spindle with sliding roller
left spindle with sliding roller table top
table top front upper spindle with sliding roller
compared to the fã¼gespindel roller pressure
automatic waxilit pump for lubrication table

machine with add. lower spindle as rotaplanspindel
machine with second feed roller before the set off and sliding roller in the dressing table.
fã¼gelineal with replaceable strips
table top rotaplanspindel with 0.5 mm depth of cut.
machine driven table roller set off after the.

without tools, technical data are taken from original weinig ab, changes and errors reserved!
 
from location near salzburg
including loading

used machinery and equipment without further warranty.
technical data warranty!

subject to prior sale

terms of delivery: from site, free loaded on truck

our general terms and conditions apply, see in the   NO. 04031 FOR SALE ON BEHALF OF CUSTOMER 4 - PAGE-PLANER / PROFILE MILLING MACHINE WEINIG PFA 22 N 8 + 1 MACHINE COMES FROM THE PRODUCTION OF PARQUET TECHNICAL DETAILS ACCORDING TO WEINIG DATASHEET OR PREVIOUS OWNER YEAR OF CONSTRUCTION: 1976 8 SPINDLES 1 HL DRESSING SPINDLE, 40 MM, 5.5 KW, 6000 RPM 2. HL F&ATILDE;&FRAC14;GESPINDEL, 3 KW, 40 MM, 6000 RPM 3. HL VERTICAL SPINDLE LEFT, 5.5 KW, 40 MM, 6000 RPM 4. HL VERTICAL SPINDLE RIGHT, 5.5 KW, 40 MM, 6000 RPM 5 HL HORIZONTAL SPINDLE TOP 7,5 KW, 40 MM, 6000 RPM 6 HORIZONTAL SPINDLE BELOW, BEARING, JOINTER, 5.5 KW, 40 MM, 6000 RPM 7 HORIZONTAL SPINDLE BELOW, BEARING, JOINTER, 7.5 KW, 50 MM, 6000 RPM 8 UNIVERSAL SPINDLE 4 KW, 40 MM, 6000 RPM DRESSING TABLE 2 M CENTRAL ADJUSTMENT 0.55 KW UNIVERSAL FEED 5.5 KW TRANSPORT ROLLERS 1 4 SPINDLE, 5-8 SPINDLE PNEUMATIC PRESSURE AFTER THE F&ATILDE;&FRAC14;GESPINDEL ADDITIONAL PENDANT TABLE TOP FRONT LEFT SPINDLE WITH SLIDING ROLLER LEFT SPINDLE WITH SLIDING ROLLER TABLE TOP TABLE TOP FRONT UPPER SPINDLE WITH SLIDING ROLLER COMPARED TO THE F&ATILDE;&FRAC14;GESPINDEL ROLLER PRESSURE AUTOMATIC WAXILIT PUMP FOR LUBRICATION TABLE MACHINE WITH ADD. LOWER SPINDLE AS ROTAPLANSPINDEL MACHINE WITH SECOND FEED ROLLER BEFORE THE SET OFF AND SLIDING ROLLER IN THE DRESSING TABLE. F&ATILDE;&FRAC14;GELINEAL WITH REPLACEABLE STRIPS TABLE TOP ROTAPLANSPINDEL WITH 0.5 MM DEPTH OF CUT. MACHINE DRIVEN TABLE ROLLER SET OFF AFTER THE. WITHOUT TOOLS, TECHNICAL DATA ARE TAKEN FROM ORIGINAL WEINIG AB, CHANGES AND ERRORS RESERVED! FROM LOCATION NEAR SALZBURG INCLUDING LOADING USED MACHINERY AND EQUIPMENT WITHOUT FURTHER WARRANTY. TECHNICAL DATA WARRANTY! SUBJECT TO PRIOR SALE TERMS OF DELIVERY: FROM SITE, FREE LOADED ON TRUCK OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: 3.375 €
Ubicación: Land-alexanderwerk gun universal kã¼chenmaschine

the machine has the following facilities:

drive on moveable base with a pull-out shelf
meat grinder with stainless steel housing with various wolf slices without filling shell
vegetable cutter, which includes:

stainless steel work case
funnel attachment
trimming attachment without a slide and plungers
five grater cylinder
two wings of the grater
base support for cylinder
arc blade disk 2, 5 mm
arc blade washer 4 mm
blade disk 1, 3 mm

the cutting discs have shown signs of wear, but are in very good condition
meat grinder is currently without feed tray, may be we can organize these yet

the machine comes from a retirement home and is neat and quiet.
the test run video and more pictures available ALEXANDERWERK GUN UNIVERSAL K&ATILDE;&FRAC14;CHENMASCHINE THE MACHINE HAS THE FOLLOWING FACILITIES: DRIVE ON MOVEABLE BASE WITH A PULL-OUT SHELF MEAT GRINDER WITH STAINLESS STEEL HOUSING WITH VARIOUS WOLF SLICES WITHOUT FILLING SHELL VEGETABLE CUTTER, WHICH INCLUDES: STAINLESS STEEL WORK CASE FUNNEL ATTACHMENT TRIMMING ATTACHMENT WITHOUT A SLIDE AND PLUNGERS FIVE GRATER CYLINDER TWO WINGS OF THE GRATER BASE SUPPORT FOR CYLINDER ARC BLADE DISK 2, 5 MM ARC BLADE WASHER 4 MM BLADE DISK 1, 3 MM THE CUTTING DISCS HAVE SHOWN SIGNS OF WEAR, BUT ARE IN VERY GOOD CONDITION MEAT GRINDER IS CURRENTLY WITHOUT FEED TRAY, MAY BE WE CAN ORGANIZE THESE YET THE MACHINE COMES FROM A RETIREMENT HOME AND IS NEAT AND QUIET. THE TEST RUN VIDEO AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: 6.200 €
Ubicación: Land-edgebander euro akv2001dk by lifting skirt, only 4 m long, but fully equipped!
heating rail 8 mm equipment, four milling units, radius scraping and buffing wheel

edge thickness up to 8 mm
workpiece thickness up to 45 mm
feed approx. 11m / min
extraction adapter 140 mm

aggregates:
top pressure manually adjustable with handwheel and display
heating rail to preheat the plate, ideally in unheated garages
gluing unit with quick heating pool
pressure zone
compound miter saw
flush trimming unit, swiveling 15deg before milling
radius milling unit, equipped with r2
radius scraper r2, front einrueckbar
buffing unit

pull-out workpiece support
plate infeed and outlet type
hood latch
ce mark
operating instructions

the machine is equipped with fresh reversible knives and sharpened saw, is directly ready for use. the engine comes from a small operation, can be performed like.

machine dimensions approx. 4000 x 1250 x 1300mm (lxwxh)(inkl. teller und ausgeklappten auslegern), length without bracket 3380 mm
weight approx. 850kg.

a video of the current machine can be sent on request.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". EDGEBANDER EURO AKV2001DK BY LIFTING SKIRT, ONLY 4 M LONG, BUT FULLY EQUIPPED! HEATING RAIL 8 MM EQUIPMENT, FOUR MILLING UNITS, RADIUS SCRAPING AND BUFFING WHEEL EDGE THICKNESS UP TO 8 MM WORKPIECE THICKNESS UP TO 45 MM FEED APPROX. 11M / MIN EXTRACTION ADAPTER 140 MM AGGREGATES: TOP PRESSURE MANUALLY ADJUSTABLE WITH HANDWHEEL AND DISPLAY HEATING RAIL TO PREHEAT THE PLATE, IDEALLY IN UNHEATED GARAGES GLUING UNIT WITH QUICK HEATING POOL PRESSURE ZONE COMPOUND MITER SAW FLUSH TRIMMING UNIT, SWIVELING 15DEG BEFORE MILLING RADIUS MILLING UNIT, EQUIPPED WITH R2 RADIUS SCRAPER R2, FRONT EINRUECKBAR BUFFING UNIT PULL-OUT WORKPIECE SUPPORT PLATE INFEED AND OUTLET TYPE HOOD LATCH CE MARK OPERATING INSTRUCTIONS THE MACHINE IS EQUIPPED WITH FRESH REVERSIBLE KNIVES AND SHARPENED SAW, IS DIRECTLY READY FOR USE. THE ENGINE COMES FROM A SMALL OPERATION, CAN BE PERFORMED LIKE. MACHINE DIMENSIONS APPROX. 4000 X 1250 X 1300MM (LXWXH)(INKL. TELLER UND AUSGEKLAPPTEN AUSLEGERN), LENGTH WITHOUT BRACKET 3380 MM WEIGHT APPROX. 850KG. A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 8.800 €
Ubicación: Land-kmt mobile desludging

the cleanline mobile desludging system i removed sand deposits in the cutting basin during cutting operation.

technical data
filling volume without cutting basin 1 m3
sampling volume 3-4 m3/h
compressed air supply 4-6 bar, 1 m3/min
standard tube length 5 m
net weight 200 kg

length 1100 mm
width: 1000 mm
height 1750 mm

the cleanline comes with ce mark and declaration of conformity according to machinery directive 2006/42/ec. KMT MOBILE DESLUDGING THE CLEANLINE MOBILE DESLUDGING SYSTEM I REMOVED SAND DEPOSITS IN THE CUTTING BASIN DURING CUTTING OPERATION. TECHNICAL DATA FILLING VOLUME WITHOUT CUTTING BASIN 1 M3 SAMPLING VOLUME 3-4 M3/H COMPRESSED AIR SUPPLY 4-6 BAR, 1 M3/MIN STANDARD TUBE LENGTH 5 M NET WEIGHT 200 KG LENGTH 1100 MM WIDTH: 1000 MM HEIGHT 1750 MM THE CLEANLINE COMES WITH CE MARK AND DECLARATION OF CONFORMITY ACCORDING TO MACHINERY DIRECTIVE 2006/42/EC.
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Precio: 9.000 €
Ubicación: Land-meiko b230vap tape transport dishwashing

ideal for washing crates, plates, trays, etc...

the machine comes from the mental hospital and is in good condition. it has been serviced regularly by meiko.

3 tank engine

technical data:

number of selectable band speeds: 3
m/min for 2 minutes of contact time according to din 10510: 1.1
how to contact with distance mm: 2200
power plate/h at 2 minutes of contact time according to din 10510: 2500
power-plate/h (max) subject: pollution degree, drying time, type of dish, etc: 3000
number of washing and rinsing procedure: 5
chemiesparsystem css-basic: x.

pump power kw css top
v
va 1.7
hw i 1.7
hw ii.
hw iii

p 0,5

circulating capacity l/min css top
v
va 1,380
hw i 1,380
hw ii.
hw iii

p 60

power tank heating kw hw i: 10
hw ii: hw iii.
water capacity 300 l
rinse water (aws) 260 l / h
tankless water heater 13 kw
drying circulation m3/h 3,460
drying: heater/blower power kw 6/0.3
recovery volume m3/h 1,200 exhaust fan and drive 0.3 kw power motors 5.1 kw
power heating 29 kw
lem-saving kw in % 16%
aws-saving rinse water 19%

css top before rinsing zone = with integrated cleaner and energy-saving system
pre-wash zone = v/va
hw main washing zones = p = pump rinse zone
all information without guarantee  MEIKO B230VAP TAPE TRANSPORT DISHWASHING IDEAL FOR WASHING CRATES, PLATES, TRAYS, ETC... THE MACHINE COMES FROM THE MENTAL HOSPITAL AND IS IN GOOD CONDITION. IT HAS BEEN SERVICED REGULARLY BY MEIKO. 3 TANK ENGINE TECHNICAL DATA: NUMBER OF SELECTABLE BAND SPEEDS: 3 M/MIN FOR 2 MINUTES OF CONTACT TIME ACCORDING TO DIN 10510: 1.1 HOW TO CONTACT WITH DISTANCE MM: 2200 POWER PLATE/H AT 2 MINUTES OF CONTACT TIME ACCORDING TO DIN 10510: 2500 POWER-PLATE/H (MAX) SUBJECT: POLLUTION DEGREE, DRYING TIME, TYPE OF DISH, ETC: 3000 NUMBER OF WASHING AND RINSING PROCEDURE: 5 CHEMIESPARSYSTEM CSS-BASIC: X. PUMP POWER KW CSS TOP V VA 1.7 HW I 1.7 HW II. HW III P 0,5 CIRCULATING CAPACITY L/MIN CSS TOP V VA 1,380 HW I 1,380 HW II. HW III P 60 POWER TANK HEATING KW HW I: 10 HW II: HW III. WATER CAPACITY 300 L RINSE WATER (AWS) 260 L / H TANKLESS WATER HEATER 13 KW DRYING CIRCULATION M3/H 3,460 DRYING: HEATER/BLOWER POWER KW 6/0.3 RECOVERY VOLUME M3/H 1,200 EXHAUST FAN AND DRIVE 0.3 KW POWER MOTORS 5.1 KW POWER HEATING 29 KW LEM-SAVING KW IN % 16% AWS-SAVING RINSE WATER 19% CSS TOP BEFORE RINSING ZONE = WITH INTEGRATED CLEANER AND ENERGY-SAVING SYSTEM PRE-WASH ZONE = V/VA HW MAIN WASHING ZONES = P = PUMP RINSE ZONE ALL INFORMATION WITHOUT GUARANTEE
Vendedor: Gastro Gischas
Año de construcción: usado
Precio: 18.500 €
Ubicación: Land-biscuit packaging machine<br>manufacturer: rose forgrove<br>model: rf112<br>year of manufacture: 1991<br>still in occasional production until current stock of packing film is used<br>infeed length approx 6.3m (comes without supporting legs due to previous line installation)<br>speed up to 48 packs per minute<br>round, square or rectangular biscuits can be wrapped<br>pack length 75 to 305mm<br>biscuit size for the standard machine is diameter 44 to 80mm; length<br>44-80mm; width 25 to 80mm<br>with tear tape attachment<br>with photocell for printed film<br>run on a wide range of products including - (parts for these are included)<br>150g bourbon fingers 200g bourbon fingers 200g malted milk 400g malted<br>milk 300g malted milk / nice 300g oaties ( hob nob)<br>(not including coding units seen in photographs)<br>with operating manuals<br>some spares available<br>plc controller but not by a screen, the rf112 by a mitsubishi.<br>(subject to terms, it may be possible to arrange for it to be setup for<br>a particular product before collection); good condition BISCUIT PACKAGING MACHINE
MANUFACTURER: ROSE FORGROVE
MODEL: RF112
YEAR OF MANUFACTURE: 1991
STILL IN OCCASIONAL PRODUCTION UNTIL CURRENT STOCK OF PACKING FILM IS USED
INFEED LENGTH APPROX 6.3M (COMES WITHOUT SUPPORTING LEGS DUE TO PREVIOUS LINE INSTALLATION)
SPEED UP TO 48 PACKS PER MINUTE
ROUND, SQUARE OR RECTANGULAR BISCUITS CAN BE WRAPPED
PACK LENGTH 75 TO 305MM
BISCUIT SIZE FOR THE STANDARD MACHINE IS DIAMETER 44 TO 80MM; LENGTH
44-80MM; WIDTH 25 TO 80MM
WITH TEAR TAPE ATTACHMENT
WITH PHOTOCELL FOR PRINTED FILM
RUN ON A WIDE RANGE OF PRODUCTS INCLUDING - (PARTS FOR THESE ARE INCLUDED)
150G BOURBON FINGERS 200G BOURBON FINGERS 200G MALTED MILK 400G MALTED
MILK 300G MALTED MILK / NICE 300G OATIES ( HOB NOB)
(NOT INCLUDING CODING UNITS SEEN IN PHOTOGRAPHS)
WITH OPERATING MANUALS
SOME SPARES AVAILABLE
PLC CONTROLLER BUT NOT BY A SCREEN, THE RF112 BY A MITSUBISHI.
(SUBJECT TO TERMS, IT MAY BE POSSIBLE TO ARRANGE FOR IT TO BE SETUP FOR
A PARTICULAR PRODUCT BEFORE COLLECTION); GOOD CONDITION
Vendedor: Middle East Trading
Año de construcción: usado
Ubicación: Land-semiautomatic pile turner baumann bsw 3-1000  <br/>  age 2001<br/>  machine number 800.43<br/>  <br/>  platform dimension inside 850 x 1370 mm<br/>  max. opening 1345 mm<br/>  min. opening 620 mm<br/>  max. pile weight 1000 kg<br/>   <br/>  machine comes with adjustable powerful air<br/>  <br/>  features: <br/>  -pile turning<br/>  -process of drying will be faster<br/>  -air will separate the printed sheets better<br/>  -change the pallet<br/>  -printers waste will be removed<br/>  <br/>  the price is 11000 euro without vat, lot<br/>  checked and cleaned condition<br/>  (required space approx. 2250 x 2250mm); good SEMIAUTOMATIC PILE TURNER BAUMANN BSW 3-1000
AGE 2001
MACHINE NUMBER 800.43

PLATFORM DIMENSION INSIDE 850 X 1370 MM
MAX. OPENING 1345 MM
MIN. OPENING 620 MM
MAX. PILE WEIGHT 1000 KG

MACHINE COMES WITH ADJUSTABLE POWERFUL AIR

FEATURES:
-PILE TURNING
-PROCESS OF DRYING WILL BE FASTER
-AIR WILL SEPARATE THE PRINTED SHEETS BETTER
-CHANGE THE PALLET
-PRINTERS WASTE WILL BE REMOVED

THE PRICE IS 11000 EURO WITHOUT VAT, LOT
CHECKED AND CLEANED CONDITION
(REQUIRED SPACE APPROX. 2250 X 2250MM); GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-coffee/espresso maker
robust and stable construction
pressure is adjustable and therefore wieiche and solid dough can be contending
piece weights can round cast on uncooked dough in evenly
to only share the dough without work for use with wirkabschalter
including 3 working plate
dough dividing range 40-110 grams per piece weight
pasta insert 3300-1200 grams
share and act in one
the machine is approximately 540kg in weight
power approx. 1, 6kw
head for quick and easy cleaning manually backwards tilting
transmission parts running in an oil bath and grant long of machine laben
380 volt power
comes with instruction manual
on request complete reconditioning and repainting of the machine
trade-in and delivery on request
comes with instruction manual
the machine is used for the parts and work dough pieces for the production of pastries (bread rolls).

only one person is required to operate the machine.  COFFEE/ESPRESSO MAKER ROBUST AND STABLE CONSTRUCTION PRESSURE IS ADJUSTABLE AND THEREFORE WIEICHE AND SOLID DOUGH CAN BE CONTENDING PIECE WEIGHTS CAN ROUND CAST ON UNCOOKED DOUGH IN EVENLY TO ONLY SHARE THE DOUGH WITHOUT WORK FOR USE WITH WIRKABSCHALTER INCLUDING 3 WORKING PLATE DOUGH DIVIDING RANGE 40-110 GRAMS PER PIECE WEIGHT PASTA INSERT 3300-1200 GRAMS SHARE AND ACT IN ONE THE MACHINE IS APPROXIMATELY 540KG IN WEIGHT POWER APPROX. 1, 6KW HEAD FOR QUICK AND EASY CLEANING MANUALLY BACKWARDS TILTING TRANSMISSION PARTS RUNNING IN AN OIL BATH AND GRANT LONG OF MACHINE LABEN 380 VOLT POWER COMES WITH INSTRUCTION MANUAL ON REQUEST COMPLETE RECONDITIONING AND REPAINTING OF THE MACHINE TRADE-IN AND DELIVERY ON REQUEST COMES WITH INSTRUCTION MANUAL THE MACHINE IS USED FOR THE PARTS AND WORK DOUGH PIECES FOR THE PRODUCTION OF PASTRIES (BREAD ROLLS). ONLY ONE PERSON IS REQUIRED TO OPERATE THE MACHINE.
Vendedor: Güzel Taceddin
Año de construcción: usado
Precio: 150 €
Ubicación: Land-we offer:<br/>  <br/>  electric motor evic msz 152 220/380 v 4.0 kw 14401 rpm shaft 24 mm<br/>  <br/>  the electric motor comes from a wallpaper factory spare parts stock. he is in stock. outwardly he is dusty due to storage. .<br/>  <br/>  technical data<br/>  electric motor: msz 152<br/>  manufacturer: evic budapest<br/>  no. 534210<br/>  year of constr.: k.a..<br/>  voltage: 220v / 380v 3 ~ delta/star<br/>  power: 4,0 kw<br/>  speed: 1440 1/min<br/>  cos phi: 0.83<br/>  power: 15.2 / 8.8 delta/star<br/>  manufactured by: k. a.<br/>  shaft diameter: 28 mm<br/>  new price: eur250<br/>  weight: approx. 40 kg<br/>  <br/>  more advertised technical assets and metal working machinery in the range as follows:<br/>  <br/>  -siemens electric motor 1 la5130-4ca70 380/660 v 5.5 kw 1450 1/min<br/>  -electric motor k21r ip55 b3 520 kg 280 s4 400/690 v 75 kw 1480 1/min<br/>  -geared motor gargate 105 w wk1777504 with gear and brake<br/>  -switching unit contactor solenoid jungheinrich 24v 150 / 300 a eur50<br/>  -forklift linde h30t with gas tank, 2005, trip lex mast bra approx. 10000 h<br/>  -forklift yale glp16 af duplex mast year 98 sideshift<br/>  -shears wmw veb fritz heckert type sctp 16 x 3150 bj. 1984<br/>  -electric motor thurm kmb 100 220/380 v 1,0 kw 2051/min with or without claw<br/>  -1 x limit switch robotron 500v 6a ip 55 3.0 kw eur6<br/>  -switch-disconnector schneider ins250 100 3interpack with sammelsch... eur90<br/>  -sick retroreflective photoelectric w24-2 b 240 double lens new eur75<br/>  -position switch schmersal 1s,1oe,sp WE OFFER:

ELECTRIC MOTOR EVIC MSZ 152 220/380 V 4.0 KW 14401 RPM SHAFT 24 MM

THE ELECTRIC MOTOR COMES FROM A WALLPAPER FACTORY SPARE PARTS STOCK. HE IS IN STOCK. OUTWARDLY HE IS DUSTY DUE TO STORAGE. .

TECHNICAL DATA
ELECTRIC MOTOR: MSZ 152
MANUFACTURER: EVIC BUDAPEST
NO. 534210
YEAR OF CONSTR.: K.A..
VOLTAGE: 220V / 380V 3 ~ DELTA/STAR
POWER: 4,0 KW
SPEED: 1440 1/MIN
COS PHI: 0.83
POWER: 15.2 / 8.8 DELTA/STAR
MANUFACTURED BY: K. A.
SHAFT DIAMETER: 28 MM
NEW PRICE: EUR250
WEIGHT: APPROX. 40 KG

MORE ADVERTISED TECHNICAL ASSETS AND METAL WORKING MACHINERY IN THE RANGE AS FOLLOWS:

-SIEMENS ELECTRIC MOTOR 1 LA5130-4CA70 380/660 V 5.5 KW 1450 1/MIN
-ELECTRIC MOTOR K21R IP55 B3 520 KG 280 S4 400/690 V 75 KW 1480 1/MIN
-GEARED MOTOR GARGATE 105 W WK1777504 WITH GEAR AND BRAKE
-SWITCHING UNIT CONTACTOR SOLENOID JUNGHEINRICH 24V 150 / 300 A EUR50
-FORKLIFT LINDE H30T WITH GAS TANK, 2005, TRIP LEX MAST BRA APPROX. 10000 H
-FORKLIFT YALE GLP16 AF DUPLEX MAST YEAR 98 SIDESHIFT
-SHEARS WMW VEB FRITZ HECKERT TYPE SCTP 16 X 3150 BJ. 1984
-ELECTRIC MOTOR THURM KMB 100 220/380 V 1,0 KW 2051/MIN WITH OR WITHOUT CLAW
-1 X LIMIT SWITCH ROBOTRON 500V 6A IP 55 3.0 KW EUR6
-SWITCH-DISCONNECTOR SCHNEIDER INS250 100 3INTERPACK WITH SAMMELSCH... EUR90
-SICK RETROREFLECTIVE PHOTOELECTRIC W24-2 B 240 DOUBLE LENS NEW EUR75
-POSITION SWITCH SCHMERSAL 1S,1OE,SP
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-make: fanuc
model: r20001a/165f
condition: used
machine type: other 
location of machine: united kingdom 
control: rj3ib controller 
machine is fully functional? yes

machine details
the fanuc r2000ia with rj3ib controller is used by automotive companies worldwide, but is also suited to a wide range of applications in many other industries too. it has a very compact configuration which means that it can fit where many physically bigger robots would not. yet the r2000ia has industry leading payload capacity, reach and is among the fastest robot arms in its class.

this makes the r2000ia very useful in many applications such as press tending, injection moulding and die casting where the ability to fit in confined spaces is important. the narrow wrist design also helps in this regard.

the wrist axis are driven by motors placed at the back of the arm and are driven through drive-shafts. this design allows the wrist unit to be as compact as possible and also helps with the overall balance and weight distribution of the arm. the wrist of the r2000ia has an ip rating of ip67 and the rest of the arm is ip54.

the lower arm is single sided; this allows the robot to “flip over” and work behind itself. again this allows the r2000ia to be useful in more applications than earlier generations of robot using a parallel arm design. overall the arm is light, fast and compact without compromising on reach or payload.

typically, in a car plant, the r2000ia would be used mostly for spot welding and part handling. however, these are very simple applications for what is a very capable machine. sealing and gluing applications as well as grinding, de-burring, finishing and polishing are all well within capabilities. other tasks include inspection, testing, mig, tig and laser welding, handling, palletising, machine tending; essentially this is a very multipurpose robot indeed.

the r2000ia comes with the fanuc rj3ib controller. benefits of the rj3ib include fast boot up time, excellent connectivity, powerful programming language, built in safety circuits, expandable i/o and bus options. the rj3ib is also recognised as being very stable and reliable.

there are several varieties of r2000ia, the three most common types are:

r2000ia/165f – the standard 165kg payload arm
r2000ia/210f – the heavy-duty 210kg payload arm 
r2000ia/125l – long arm version giving extra reach

these are rare arm types that we also see:

r2000ia/165r – usually mounted on a pedestal above the work area
r2000ia/200r – heavy-duty pedestal robot
r2000ia/165cf – ultra compact short arm version
r2000ia/200fo – 200kg payload “forward option”
r2000ia/100p - pedestal mounting 3500mm reach for press tending
r2000ia/130u - ceiling mounted hanging robot

each robot is cleaned and tested. depending on condition, arms are also repainted. testing is done in both manual and auto. we also change any lubricants required and change the batteries.

the video below shows some typical applications of the r2000ia in an automotive plant, but the r2000ia is also used for many other applications.  MAKE: FANUC MODEL: R20001A/165F CONDITION: USED MACHINE TYPE: OTHER LOCATION OF MACHINE: UNITED KINGDOM CONTROL: RJ3IB CONTROLLER MACHINE IS FULLY FUNCTIONAL? YES MACHINE DETAILS THE FANUC R2000IA WITH RJ3IB CONTROLLER IS USED BY AUTOMOTIVE COMPANIES WORLDWIDE, BUT IS ALSO SUITED TO A WIDE RANGE OF APPLICATIONS IN MANY OTHER INDUSTRIES TOO. IT HAS A VERY COMPACT CONFIGURATION WHICH MEANS THAT IT CAN FIT WHERE MANY PHYSICALLY BIGGER ROBOTS WOULD NOT. YET THE R2000IA HAS INDUSTRY LEADING PAYLOAD CAPACITY, REACH AND IS AMONG THE FASTEST ROBOT ARMS IN ITS CLASS. THIS MAKES THE R2000IA VERY USEFUL IN MANY APPLICATIONS SUCH AS PRESS TENDING, INJECTION MOULDING AND DIE CASTING WHERE THE ABILITY TO FIT IN CONFINED SPACES IS IMPORTANT. THE NARROW WRIST DESIGN ALSO HELPS IN THIS REGARD. THE WRIST AXIS ARE DRIVEN BY MOTORS PLACED AT THE BACK OF THE ARM AND ARE DRIVEN THROUGH DRIVE-SHAFTS. THIS DESIGN ALLOWS THE WRIST UNIT TO BE AS COMPACT AS POSSIBLE AND ALSO HELPS WITH THE OVERALL BALANCE AND WEIGHT DISTRIBUTION OF THE ARM. THE WRIST OF THE R2000IA HAS AN IP RATING OF IP67 AND THE REST OF THE ARM IS IP54. THE LOWER ARM IS SINGLE SIDED; THIS ALLOWS THE ROBOT TO “FLIP OVER” AND WORK BEHIND ITSELF. AGAIN THIS ALLOWS THE R2000IA TO BE USEFUL IN MORE APPLICATIONS THAN EARLIER GENERATIONS OF ROBOT USING A PARALLEL ARM DESIGN. OVERALL THE ARM IS LIGHT, FAST AND COMPACT WITHOUT COMPROMISING ON REACH OR PAYLOAD. TYPICALLY, IN A CAR PLANT, THE R2000IA WOULD BE USED MOSTLY FOR SPOT WELDING AND PART HANDLING. HOWEVER, THESE ARE VERY SIMPLE APPLICATIONS FOR WHAT IS A VERY CAPABLE MACHINE. SEALING AND GLUING APPLICATIONS AS WELL AS GRINDING, DE-BURRING, FINISHING AND POLISHING ARE ALL WELL WITHIN CAPABILITIES. OTHER TASKS INCLUDE INSPECTION, TESTING, MIG, TIG AND LASER WELDING, HANDLING, PALLETISING, MACHINE TENDING; ESSENTIALLY THIS IS A VERY MULTIPURPOSE ROBOT INDEED. THE R2000IA COMES WITH THE FANUC RJ3IB CONTROLLER. BENEFITS OF THE RJ3IB INCLUDE FAST BOOT UP TIME, EXCELLENT CONNECTIVITY, POWERFUL PROGRAMMING LANGUAGE, BUILT IN SAFETY CIRCUITS, EXPANDABLE I/O AND BUS OPTIONS. THE RJ3IB IS ALSO RECOGNISED AS BEING VERY STABLE AND RELIABLE. THERE ARE SEVERAL VARIETIES OF R2000IA, THE THREE MOST COMMON TYPES ARE: R2000IA/165F – THE STANDARD 165KG PAYLOAD ARM R2000IA/210F – THE HEAVY-DUTY 210KG PAYLOAD ARM R2000IA/125L – LONG ARM VERSION GIVING EXTRA REACH THESE ARE RARE ARM TYPES THAT WE ALSO SEE: R2000IA/165R – USUALLY MOUNTED ON A PEDESTAL ABOVE THE WORK AREA R2000IA/200R – HEAVY-DUTY PEDESTAL ROBOT R2000IA/165CF – ULTRA COMPACT SHORT ARM VERSION R2000IA/200FO – 200KG PAYLOAD “FORWARD OPTION” R2000IA/100P - PEDESTAL MOUNTING 3500MM REACH FOR PRESS TENDING R2000IA/130U - CEILING MOUNTED HANGING ROBOT EACH ROBOT IS CLEANED AND TESTED. DEPENDING ON CONDITION, ARMS ARE ALSO REPAINTED. TESTING IS DONE IN BOTH MANUAL AND AUTO. WE ALSO CHANGE ANY LUBRICANTS REQUIRED AND CHANGE THE BATTERIES. THE VIDEO BELOW SHOWS SOME TYPICAL APPLICATIONS OF THE R2000IA IN AN AUTOMOTIVE PLANT, BUT THE R2000IA IS ALSO USED FOR MANY OTHER APPLICATIONS.
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-treif puma portioning for meat
fully stainless steel portion cutter. this particular treif puma comes with an automatic out-feed conveyor to take away the portioned product. very strong machine to cut fresh and frozen meat.
with the display and advanced plc it’s possible to make many programs without having to adjust the parameters each time the machine has to process different product.
therefore working with this machine is very easy.
the treif is delivered with many spare parts like;
(find photo’s for an overview)
2 new motors
new belts
4 x new and used blades.
new covers with safety switches
new plc
new electrical parts 


scotraco has many more machines available, we deal with meat/ fish processing and packaging machines. visit our profile or website for more information.

overview from our brands;
baader, marel, henkovac, henkelman, polyclip, automac, multivac, vc999, laska, kramer greber, scanvaegt, laska, koppens, cfs, gea, yamato, ishida, multipond, jasa, gks, innotech, boss, cryovac, ishida, busch  TREIF PUMA PORTIONING FOR MEAT FULLY STAINLESS STEEL PORTION CUTTER. THIS PARTICULAR TREIF PUMA COMES WITH AN AUTOMATIC OUT-FEED CONVEYOR TO TAKE AWAY THE PORTIONED PRODUCT. VERY STRONG MACHINE TO CUT FRESH AND FROZEN MEAT. WITH THE DISPLAY AND ADVANCED PLC IT’S POSSIBLE TO MAKE MANY PROGRAMS WITHOUT HAVING TO ADJUST THE PARAMETERS EACH TIME THE MACHINE HAS TO PROCESS DIFFERENT PRODUCT. THEREFORE WORKING WITH THIS MACHINE IS VERY EASY. THE TREIF IS DELIVERED WITH MANY SPARE PARTS LIKE; (FIND PHOTO’S FOR AN OVERVIEW) 2 NEW MOTORS NEW BELTS 4 X NEW AND USED BLADES. NEW COVERS WITH SAFETY SWITCHES NEW PLC NEW ELECTRICAL PARTS SCOTRACO HAS MANY MORE MACHINES AVAILABLE, WE DEAL WITH MEAT/ FISH PROCESSING AND PACKAGING MACHINES. VISIT OUR PROFILE OR WEBSITE FOR MORE INFORMATION. OVERVIEW FROM OUR BRANDS; BAADER, MAREL, HENKOVAC, HENKELMAN, POLYCLIP, AUTOMAC, MULTIVAC, VC999, LASKA, KRAMER GREBER, SCANVAEGT, LASKA, KOPPENS, CFS, GEA, YAMATO, ISHIDA, MULTIPOND, JASA, GKS, INNOTECH, BOSS, CRYOVAC, ISHIDA, BUSCH
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: advanced drum with outstanding output
the drum in the dpx 4 is based on the latest manufacturing technologies. it is made of extruded aluminum to ensure the highest degree of precision and accuracy. the dpx 4 will expose at any resolution between 1200 and 3000 dpi. this is achieved by automatically and dynamically adjusting the spot size through varying laser intensity and focus. this results in a perfect spot that gives you high quality prints.

the dpx 4 comes standard with one media compartment and a bacher 2000 punch set in the 425 mm position that can be easily changed to the 220 mm position. a separate bacher 220 mm punch and/or komori 550 mm punch are optional and field upgradeable.

the built-in twin-bath processor has one temperature controlled activator tank with mechanical stirrer and circulation pump to ensure even processing and a stabilizer tank. both tanks have sensors for controlling the chemistry level and active replenishment to ensure the correct level of new chemistry in the tanks and to achieve precise activation of the plate. the dryer unit is sensor equipped for computer controlled temperature, ensuring a properly dried, ready-to-use plate. the dpx 4\'s maintenance friendly design means the processor requires minimal attention and gives you more time for your core business - printing.
user friendly interface
the dpx is controlled by the pc-based dotmanager interface. this very easy to use interface gives you full control of the unit allowing you to monitor machine activity at any stage of plate production. the dotmanager covers everything from defining material set-ups, selecting material compartment and setting up the processor preferences. and the added benefit of the remote software feature helps keep your service cost down by allowing your service provider to perform service remotely.
flexible front-end connections
the dpx 4 offers you a choice of front-end connections. it can be connected to any common front-end workflow or we can custom design a workflow that precisely fits your operation. any option you choose is flexible and easy to use.
expand your business
with run lengths getting shorter and print pricing getting tighter, the dpx 4 and silver digiplate(tm) polyester plates combine to give you the speed you need and the flexibility you require, at a cost that will make you more competitive.; good .gif" alt="Land-computer to polyester plate system - mitsubishi silver digiplate

cost effective 4-up plate production
the market momentum behind polyester plate imaging continues to build. small to mid-sized printers who want to obtain the benefits of ctp without the cost of metal plates are finding polyester plates with dedicated polyester platesetters to be very attractive. the dpx 4 is a fully automated, highly productive, daylight operated computer to polyester plate system producing imaged, punched, dried and cut-to-size plates - ready-to-use. delivering high quality plates up to 26.77\" x 29.5\", the dpx 4 is the choice for outstanding 4-up process color work. operating and maintaining the unit is easy and saves valuable time. additionally - the dpx 4 has a very small footprint taking up a minimum of space and giving you more space for production.
advanced drum with outstanding output
the drum in the dpx 4 is based on the latest manufacturing technologies. it is made of extruded aluminum to ensure the highest degree of precision and accuracy. the dpx 4 will expose at any resolution between 1200 and 3000 dpi. this is achieved by automatically and dynamically adjusting the spot size through varying laser intensity and focus. this results in a perfect spot that gives you high quality prints.

the dpx 4 comes standard with one media compartment and a bacher 2000 punch set in the 425 mm position that can be easily changed to the 220 mm position. a separate bacher 220 mm punch and/or komori 550 mm punch are optional and field upgradeable.

the built-in twin-bath processor has one temperature controlled activator tank with mechanical stirrer and circulation pump to ensure even processing and a stabilizer tank. both tanks have sensors for controlling the chemistry level and active replenishment to ensure the correct level of new chemistry in the tanks and to achieve precise activation of the plate. the dryer unit is sensor equipped for computer controlled temperature, ensuring a properly dried, ready-to-use plate. the dpx 4\'s maintenance friendly design means the processor requires minimal attention and gives you more time for your core business - printing.
user friendly interface
the dpx is controlled by the pc-based dotmanager interface. this very easy to use interface gives you full control of the unit allowing you to monitor machine activity at any stage of plate production. the dotmanager covers everything from defining material set-ups, selecting material compartment and setting up the processor preferences. and the added benefit of the remote software feature helps keep your service cost down by allowing your service provider to perform service remotely.
flexible front-end connections
the dpx 4 offers you a choice of front-end connections. it can be connected to any common front-end workflow or we can custom design a workflow that precisely fits your operation. any option you choose is flexible and easy to use.
expand your business
with run lengths getting shorter and print pricing getting tighter, the dpx 4 and silver digiplate(tm) polyester plates combine to give you the speed you need and the flexibility you require, at a cost that will make you more competitive.; good " style="height: 18px;"> COMPUTER TO POLYESTER PLATE SYSTEM - MITSUBISHI SILVER DIGIPLATE

COST EFFECTIVE 4-UP PLATE PRODUCTION
THE MARKET MOMENTUM BEHIND POLYESTER PLATE IMAGING CONTINUES TO BUILD. SMALL TO MID-SIZED PRINTERS WHO WANT TO OBTAIN THE BENEFITS OF CTP WITHOUT THE COST OF METAL PLATES ARE FINDING POLYESTER PLATES WITH DEDICATED POLYESTER PLATESETTERS TO BE VERY ATTRACTIVE. THE DPX 4 IS A FULLY AUTOMATED, HIGHLY PRODUCTIVE, DAYLIGHT OPERATED COMPUTER TO POLYESTER PLATE SYSTEM PRODUCING IMAGED, PUNCHED, DRIED AND CUT-TO-SIZE PLATES - READY-TO-USE. DELIVERING HIGH QUALITY PLATES UP TO 26.77\" X 29.5\", THE DPX 4 IS THE CHOICE FOR OUTSTANDING 4-UP PROCESS COLOR WORK. OPERATING AND MAINTAINING THE UNIT IS EASY AND SAVES VALUABLE TIME. ADDITIONALLY - THE DPX 4 HAS A VERY SMALL FOOTPRINT TAKING UP A MINIMUM OF SPACE AND GIVING YOU MORE SPACE FOR PRODUCTION.
ADVANCED DRUM WITH OUTSTANDING OUTPUT
THE DRUM IN THE DPX 4 IS BASED ON THE LATEST MANUFACTURING TECHNOLOGIES. IT IS MADE OF EXTRUDED ALUMINUM TO ENSURE THE HIGHEST DEGREE OF PRECISION AND ACCURACY. THE DPX 4 WILL EXPOSE AT ANY RESOLUTION BETWEEN 1200 AND 3000 DPI. THIS IS ACHIEVED BY AUTOMATICALLY AND DYNAMICALLY ADJUSTING THE SPOT SIZE THROUGH VARYING LASER INTENSITY AND FOCUS. THIS RESULTS IN A PERFECT SPOT THAT GIVES YOU HIGH QUALITY PRINTS.

THE DPX 4 COMES STANDARD WITH ONE MEDIA COMPARTMENT AND A BACHER 2000 PUNCH SET IN THE 425 MM POSITION THAT CAN BE EASILY CHANGED TO THE 220 MM POSITION. A SEPARATE BACHER 220 MM PUNCH AND/OR KOMORI 550 MM PUNCH ARE OPTIONAL AND FIELD UPGRADEABLE.

THE BUILT-IN TWIN-BATH PROCESSOR HAS ONE TEMPERATURE CONTROLLED ACTIVATOR TANK WITH MECHANICAL STIRRER AND CIRCULATION PUMP TO ENSURE EVEN PROCESSING AND A STABILIZER TANK. BOTH TANKS HAVE SENSORS FOR CONTROLLING THE CHEMISTRY LEVEL AND ACTIVE REPLENISHMENT TO ENSURE THE CORRECT LEVEL OF NEW CHEMISTRY IN THE TANKS AND TO ACHIEVE PRECISE ACTIVATION OF THE PLATE. THE DRYER UNIT IS SENSOR EQUIPPED FOR COMPUTER CONTROLLED TEMPERATURE, ENSURING A PROPERLY DRIED, READY-TO-USE PLATE. THE DPX 4\'S MAINTENANCE FRIENDLY DESIGN MEANS THE PROCESSOR REQUIRES MINIMAL ATTENTION AND GIVES YOU MORE TIME FOR YOUR CORE BUSINESS - PRINTING.
USER FRIENDLY INTERFACE
THE DPX IS CONTROLLED BY THE PC-BASED DOTMANAGER INTERFACE. THIS VERY EASY TO USE INTERFACE GIVES YOU FULL CONTROL OF THE UNIT ALLOWING YOU TO MONITOR MACHINE ACTIVITY AT ANY STAGE OF PLATE PRODUCTION. THE DOTMANAGER COVERS EVERYTHING FROM DEFINING MATERIAL SET-UPS, SELECTING MATERIAL COMPARTMENT AND SETTING UP THE PROCESSOR PREFERENCES. AND THE ADDED BENEFIT OF THE REMOTE SOFTWARE FEATURE HELPS KEEP YOUR SERVICE COST DOWN BY ALLOWING YOUR SERVICE PROVIDER TO PERFORM SERVICE REMOTELY.
FLEXIBLE FRONT-END CONNECTIONS
THE DPX 4 OFFERS YOU A CHOICE OF FRONT-END CONNECTIONS. IT CAN BE CONNECTED TO ANY COMMON FRONT-END WORKFLOW OR WE CAN CUSTOM DESIGN A WORKFLOW THAT PRECISELY FITS YOUR OPERATION. ANY OPTION YOU CHOOSE IS FLEXIBLE AND EASY TO USE.
EXPAND YOUR BUSINESS
WITH RUN LENGTHS GETTING SHORTER AND PRINT PRICING GETTING TIGHTER, THE DPX 4 AND SILVER DIGIPLATE(TM) POLYESTER PLATES COMBINE TO GIVE YOU THE SPEED YOU NEED AND THE FLEXIBILITY YOU REQUIRE, AT A COST THAT WILL MAKE YOU MORE COMPETITIVE.; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-low cost mini hall kit (6m * 9m * 4m) 

we offer inexpensive gable roof garage kits made of galvanized steel lightweight profiles, which can be installed without heavy / expensive rental machinery (forklift / crane), therefore well suited for cost-conscious entrepreneurs, tradesmen as well as for the do-it-yourselfers. 

structural kit LOW COST MINI HALL KIT (6M * 9M * 4M) WE OFFER INEXPENSIVE GABLE ROOF GARAGE KITS MADE OF GALVANIZED STEEL LIGHTWEIGHT PROFILES, WHICH CAN BE INSTALLED WITHOUT HEAVY / EXPENSIVE RENTAL MACHINERY (FORKLIFT / CRANE), THEREFORE WELL SUITED FOR COST-CONSCIOUS ENTREPRENEURS, TRADESMEN AS WELL AS FOR THE DO-IT-YOURSELFERS. STRUCTURAL KIT "REF-NO. HBS30ST" HL6 * HB5 * TH2, 5 / FH3M GARAGE LENGTH: 6007 MM OUTER EDGE OF WALL BARS; GARAGE WIDTH: 4999 MM OUTER WALL TIES; EAVES HEIGHT: 2558 MM TOP FRAME TIES; GARAGE HEIGHT: 3064 MM TOP OF FRAME TIES; STRUCTURAL KIT "REF-NO. HBS54ST" HL9 * HB6 * TH3, 5 / FH4M GARAGE LENGTH: 9007MM OUTER EDGE OF WALL BARS; GARAGE WIDTH: 5999 MM OUTER WALL TIES; EAVES HEIGHT: 3558 MM TOP FRAME TIES; GARAGE HEIGHT: 4064 MM TOP FRAME TIES; SUITABILITY OF OUR STRUCTURAL KITS: OUR LIGHTWEIGHT STEEL KITS ARE SUITABLE FOR THE CONSTRUCTION OF SMALLER HALLS FOR STORING YOUR BELONGINGS, FOR THE STORAGE OF HAY, STRAW AND FEED SUPPLIES, FOR THE CONSTRUCTION OF SINGLE AND DOUBLE GARAGES, MACHINE HALLS, TYRE STORAGE BUILDING AND MANY MORE. DESCRIPTION & ADVANTAGES OF OUR KITS: LIGHTWEIGHT COLD ROLLED PROFILES ARE INCREASINGLY USED IN STRUCTURES DUE TO THEIR MATERIAL ADVANTAGES, BECAUSE SUCH HIGH-STRENGTH STEEL LIGHTWEIGHT PROFILES CAN REDUCE OFTEN THE WEIGHT OF STEEL-FRAME BY 50%, WHAT REDUCES THE COST SIGNIFICANTLY. THIS WEIGHT REDUCTION CAN GREATLY REDUCE INSTALLATION TIME AND ELIMINATE THE NEED FOR HEAVY CONSTRUCTION EQUIPMENT, WHAT MEANS ADDITIONAL COST SAVINGS FOR ASSEMBLY. IN ADDITION, THE REQUIREMENTS ON THE BASE PLATE ARE REDUCED DUE TO THE HIGH STRENGTH OF OUR LIGHT WEIGHT KITS. DOCUMENTATION: OUR MONO PITCHED / GABLE ROOF KITS COMPLY WITH THE EUROPE-WIDE HARMONISED "EURO CODES" AND ARE DESIGNED FOR A SNOW LOAD OF 1,2 KN/M² (120 KG / M²). EACH KIT COMES WITH DETAILED DESIGN CALCULATIONS INCLUDING DRAWINGS FOR EASY INSTALLATION ON SITE. ROOF & WALL CLADDING: THE BUILDING ENVELOPE CAN BE MADE OF BOX PROFILE STEEL SHEETS OR SANDWICH PANELS. OUR NET PRICES INCLUDE DELIVERY WITHIN GERMANY: PRICES UPON WRITTEN REQUEST. IF YOU HAVE QUESTIONS, PLEASE CONTACT US WITH YOUR FULL CONTACT DETAILS.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Ubicación: Land-double end profiling machine for the door and windows production<br><br>working width 4000 mm<br>3 aggregates on each side<br>1 x saw<br>2 x vertical miling aggregate - spindle stroke 800 mm!<br><br>long side profiling machine with 16 spindles<br><br><br>machine comes with a lot of spare parts!<br><br>further technical data on demand<br><br><br><br><br>advise used machines: <br><br>o technical data without obligation, mistake and intermediate sale reserve.<br>o price is considered ex-location price <br>o all articles or machines are bought as seen without any entitlement on warranty. <br>o it is left to the choice of the buyer to view the machines before at its location. <br>o special arrangements are possible but only valid in written form. <br><br>(we answer your inquiries only with stated address + telephone number!); very good, working condition, ex location DOUBLE END PROFILING MACHINE FOR THE DOOR AND WINDOWS PRODUCTION

WORKING WIDTH 4000 MM
3 AGGREGATES ON EACH SIDE
1 X SAW
2 X VERTICAL MILING AGGREGATE - SPINDLE STROKE 800 MM!

LONG SIDE PROFILING MACHINE WITH 16 SPINDLES


MACHINE COMES WITH A LOT OF SPARE PARTS!

FURTHER TECHNICAL DATA ON DEMAND




ADVISE USED MACHINES:

O TECHNICAL DATA WITHOUT OBLIGATION, MISTAKE AND INTERMEDIATE SALE RESERVE.
O PRICE IS CONSIDERED EX-LOCATION PRICE
O ALL ARTICLES OR MACHINES ARE BOUGHT AS SEEN WITHOUT ANY ENTITLEMENT ON WARRANTY.
O IT IS LEFT TO THE CHOICE OF THE BUYER TO VIEW THE MACHINES BEFORE AT ITS LOCATION.
O SPECIAL ARRANGEMENTS ARE POSSIBLE BUT ONLY VALID IN WRITTEN FORM.

(WE ANSWER YOUR INQUIRIES ONLY WITH STATED ADDRESS + TELEPHONE NUMBER!); VERY GOOD, WORKING CONDITION, EX LOCATION
Vendedor: PRATTES Maschinen-Handels GmbH
Año de construcción: usado
Precio: 4.700 €
Ubicación: Land-multivac r175 cd skin-pack thermoformer
full automatic skin-pack packaging machine

this multivac r175 cd skin-pack thermoformer has been in production since november 2014. very well maintained while this machine had a multivac service contract.
this full automatic thermoformer comes with a 3 tray mould with a tray size of 270mm x 133mm, packing up to 10 cycles (30 trays) per minute. delivered with a spare dome (packing process) and 12 pallets black base film.

the r175 sits in the compact thermoforming range from multivac, making it interesting for companies that are seeking a medium output in a compact production facility with little space.
suitable for many types of products like meat, fish, cheese, vegetables, fruits and many more.

darfresh / skin-pack technology
the darfresh packaging process uses specially formulated top and bottom webs to create a vacuum skin consumer pack that fits around the product like a second skin. the top shrink web wraps itself firmly but gently around every contour of the product without distorting its shape. the bottom and top webs are then heat-sealed together right up to the product’s edges to produce a securely and hygienically sealed pack.

the result is a tray:
with a high vacuum that guarantees a long shelf life
with a practically invisible top web that surrounds the product like a second skin, giving it a natural look for maximum merchandising appeal
with total surface sealing that prevents juice migration and keeps surface decoration securely in place
with multicolour printing capabilities for increased communication and attractiveness
that can be competitively presented at pos with multiple colour, imprint and label options
that guards against freezer burn during deep-freeze storage

key information:
- skin-pack (darfresh) technology
- tray size: 270mm x 133mm
- 3 trays per cycle
- max. output: 10 cycles (30 trays) per minute
- in operation untill july 2017
- power supply:
- 415/240v
- 50hz
- 3/n/pe ac
- 11,5 kw
- 42a nominal
- 50a maximum pre-fuse  


scotraco has many more machines available, we deal with meat/ fish processing and packaging machines. visit our profile or website for more information.

overview from our brands;
baader, marel, henkovac, henkelman, polyclip, automac, multivac, vc999, laska, kramer greber, scanvaegt, laska, koppens, cfs, gea, yamato, ishida, multipond, jasa, gks, innotech, boss, cryovac, ishida, busch MULTIVAC R175 CD SKIN-PACK THERMOFORMER FULL AUTOMATIC SKIN-PACK PACKAGING MACHINE THIS MULTIVAC R175 CD SKIN-PACK THERMOFORMER HAS BEEN IN PRODUCTION SINCE NOVEMBER 2014. VERY WELL MAINTAINED WHILE THIS MACHINE HAD A MULTIVAC SERVICE CONTRACT. THIS FULL AUTOMATIC THERMOFORMER COMES WITH A 3 TRAY MOULD WITH A TRAY SIZE OF 270MM X 133MM, PACKING UP TO 10 CYCLES (30 TRAYS) PER MINUTE. DELIVERED WITH A SPARE DOME (PACKING PROCESS) AND 12 PALLETS BLACK BASE FILM. THE R175 SITS IN THE COMPACT THERMOFORMING RANGE FROM MULTIVAC, MAKING IT INTERESTING FOR COMPANIES THAT ARE SEEKING A MEDIUM OUTPUT IN A COMPACT PRODUCTION FACILITY WITH LITTLE SPACE. SUITABLE FOR MANY TYPES OF PRODUCTS LIKE MEAT, FISH, CHEESE, VEGETABLES, FRUITS AND MANY MORE. DARFRESH / SKIN-PACK TECHNOLOGY THE DARFRESH PACKAGING PROCESS USES SPECIALLY FORMULATED TOP AND BOTTOM WEBS TO CREATE A VACUUM SKIN CONSUMER PACK THAT FITS AROUND THE PRODUCT LIKE A SECOND SKIN. THE TOP SHRINK WEB WRAPS ITSELF FIRMLY BUT GENTLY AROUND EVERY CONTOUR OF THE PRODUCT WITHOUT DISTORTING ITS SHAPE. THE BOTTOM AND TOP WEBS ARE THEN HEAT-SEALED TOGETHER RIGHT UP TO THE PRODUCT’S EDGES TO PRODUCE A SECURELY AND HYGIENICALLY SEALED PACK. THE RESULT IS A TRAY: WITH A HIGH VACUUM THAT GUARANTEES A LONG SHELF LIFE WITH A PRACTICALLY INVISIBLE TOP WEB THAT SURROUNDS THE PRODUCT LIKE A SECOND SKIN, GIVING IT A NATURAL LOOK FOR MAXIMUM MERCHANDISING APPEAL WITH TOTAL SURFACE SEALING THAT PREVENTS JUICE MIGRATION AND KEEPS SURFACE DECORATION SECURELY IN PLACE WITH MULTICOLOUR PRINTING CAPABILITIES FOR INCREASED COMMUNICATION AND ATTRACTIVENESS THAT CAN BE COMPETITIVELY PRESENTED AT POS WITH MULTIPLE COLOUR, IMPRINT AND LABEL OPTIONS THAT GUARDS AGAINST FREEZER BURN DURING DEEP-FREEZE STORAGE KEY INFORMATION: - SKIN-PACK (DARFRESH) TECHNOLOGY - TRAY SIZE: 270MM X 133MM - 3 TRAYS PER CYCLE - MAX. OUTPUT: 10 CYCLES (30 TRAYS) PER MINUTE - IN OPERATION UNTILL JULY 2017 - POWER SUPPLY: - 415/240V - 50HZ - 3/N/PE AC - 11,5 KW - 42A NOMINAL - 50A MAXIMUM PRE-FUSE SCOTRACO HAS MANY MORE MACHINES AVAILABLE, WE DEAL WITH MEAT/ FISH PROCESSING AND PACKAGING MACHINES. VISIT OUR PROFILE OR WEBSITE FOR MORE INFORMATION. OVERVIEW FROM OUR BRANDS; BAADER, MAREL, HENKOVAC, HENKELMAN, POLYCLIP, AUTOMAC, MULTIVAC, VC999, LASKA, KRAMER GREBER, SCANVAEGT, LASKA, KOPPENS, CFS, GEA, YAMATO, ISHIDA, MULTIPOND, JASA, GKS, INNOTECH, BOSS, CRYOVAC, ISHIDA, BUSCH
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: Land-manufacturer: heinrich kã¶llschenmaschinefabrik rheydt
model: on the 2000 x 20 machine no.: 761907
year of construction: 1976 weight: 24500kg

general information / technical data:
heavy mechanical bending machines from sturdy welding construction in very good condition
working width: 2000 mm
steel st 50 maximum material thickness: 20 mm
opening the top clamping (clamping cheek): 475 mm
adjustment of the beam: 200 mm motorized height adjustment
bending angle: 130â° via electrical rotation angle input can be set
upper cheek speed: 6 mm / sec
bending beam speed: 1.25 rpm (approx. 90 sec for 90 â° bend)
backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing)
dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm
bending actuator power: 30kw
power top clamping (clamping cheek): 22kw
power supply: 500volt 50 hz / control voltage 220volt

optional accessories:
&bull; 5 biegewerkzeugejeweils set of clamping and bending rail r 8, r 12, r 20, r40 15,r
&bull; folding rear gauge
&bull; central lubrication
&bull; machine documentation

comment:
&bull; machine comes from a repair operation
&bull; for the machine, a pit is 900mm deep (foundation) requires the substructure on the images of the rotary actuator is used only to run testing and demonstration.
 MANUFACTURER: HEINRICH K&ATILDE;&PARA;LLSCHENMASCHINEFABRIK RHEYDT MODEL: ON THE 2000 X 20 MACHINE NO.: 761907 YEAR OF CONSTRUCTION: 1976 WEIGHT: 24500KG GENERAL INFORMATION / TECHNICAL DATA: HEAVY MECHANICAL BENDING MACHINES FROM STURDY WELDING CONSTRUCTION IN VERY GOOD CONDITION WORKING WIDTH: 2000 MM STEEL ST 50 MAXIMUM MATERIAL THICKNESS: 20 MM OPENING THE TOP CLAMPING (CLAMPING CHEEK): 475 MM ADJUSTMENT OF THE BEAM: 200 MM MOTORIZED HEIGHT ADJUSTMENT BENDING ANGLE: 130&ACIRC;&DEG; VIA ELECTRICAL ROTATION ANGLE INPUT CAN BE SET UPPER CHEEK SPEED: 6 MM / SEC BENDING BEAM SPEED: 1.25 RPM (APPROX. 90 SEC FOR 90 &ACIRC;&DEG; BEND) BACKGAUGE: FROM 50 TO 999 MM ELECTRICALLY ADJUSTABLE, WITH DIGITAL DISPLAY OF LENGTH DIMENSIONS MACHINE: (H X W X D) 3600 X 4350 X 4400 MM (WITHOUT PIT / WITH BENDING BEAM LANDING) DIMENSIONS CABINET:(H X B X T) 1800 X 1200 X 400 MM BENDING ACTUATOR POWER: 30KW POWER TOP CLAMPING (CLAMPING CHEEK): 22KW POWER SUPPLY: 500VOLT 50 HZ / CONTROL VOLTAGE 220VOLT OPTIONAL ACCESSORIES: &BULL; 5 BIEGEWERKZEUGEJEWEILS SET OF CLAMPING AND BENDING RAIL R 8, R 12, R 20, R40 15,R &BULL; FOLDING REAR GAUGE &BULL; CENTRAL LUBRICATION &BULL; MACHINE DOCUMENTATION COMMENT: &BULL; MACHINE COMES FROM A REPAIR OPERATION &BULL; FOR THE MACHINE, A PIT IS 900MM DEEP (FOUNDATION) REQUIRES THE SUBSTRUCTURE ON THE IMAGES OF THE ROTARY ACTUATOR IS USED ONLY TO RUN TESTING AND DEMONSTRATION.
Vendedor: Wiemers AG
Año de construcción: usado
Precio: 1.300 €
Ubicación: Land-
here i offer a used brand kippbrã¤ter/bratt pan-tilting of the company "kã¼ppersbusch gelsenkirchen":
type: fep 910 ipx5 (kcf 0034)
material: stainless steel
operating mode: power 400 v - 16.25 kw - 50 hz
: height width 140 cm - 85 cm - depth 85 cm
the unit comes from a defunct commercial kitchen and worked perfectly until the end. it is in a very clean condition, without damage. according to information of the previous owner about 5 years young
accessories: 2 stainless steel hoses, 4 adjustable feet, 100 ltr. double insulation the capacity, pan lids.
 HERE I OFFER A USED BRAND KIPPBR&ATILDE;&CURREN;TER/BRATT PAN-TILTING OF THE COMPANY "K&ATILDE;&FRAC14;PPERSBUSCH GELSENKIRCHEN": TYPE: FEP 910 IPX5 (KCF 0034) MATERIAL: STAINLESS STEEL OPERATING MODE: POWER 400 V - 16.25 KW - 50 HZ : HEIGHT WIDTH 140 CM - 85 CM - DEPTH 85 CM THE UNIT COMES FROM A DEFUNCT COMMERCIAL KITCHEN AND WORKED PERFECTLY UNTIL THE END. IT IS IN A VERY CLEAN CONDITION, WITHOUT DAMAGE. ACCORDING TO INFORMATION OF THE PREVIOUS OWNER ABOUT 5 YEARS YOUNG ACCESSORIES: 2 STAINLESS STEEL HOSES, 4 ADJUSTABLE FEET, 100 LTR. DOUBLE INSULATION THE CAPACITY, PAN LIDS.
Vendedor: Herr Küppersbusch Kippung
Año de construcción: usado
Ubicación: Land-cold radial forging machine gfm shk-10 

yom: 1980
number of hammers:	4
max. forging force per hammer:	125 t
number of hammer strokes:	1000/min
length of hammer:	158 mm
range of switching the hammers for max. diameter 60 mm	
max. forging diameter:	45 mm
max. workpiece length:	900 mm
adjustable feed speed of clamping head:	0-12 mm/sec
force of steady rest at setting pressure of 30 bars v. v4	ca 5 t
electrical rated power:	140 kw
working voltage:	280 v, 50 hz
control voltage:	220 v, 50 hz
connection of cooling water:	r 1 ½”
inlet temperature of cooling water:	max. 30°c
consumption of cooling water:	9 m³/h
supply of compressed air:	st.r3 fixing dia 20
consumption of compressed air:
(watered air)	1 nm³/min
forging height over floor:	1250 mm
total height of machine:	2150 mm
total length of machine:	10150 mm
total width of machine (without electrical control cabinet):	5400 mm
machine weight:	22000 kg

the machine comes completely revamped with a new electrics, hydraulics, new original gfm control and with test run before delivery.
as new - ready to run
       COLD RADIAL FORGING MACHINE GFM SHK-10 YOM: 1980 NUMBER OF HAMMERS: 4 MAX. FORGING FORCE PER HAMMER: 125 T NUMBER OF HAMMER STROKES: 1000/MIN LENGTH OF HAMMER: 158 MM RANGE OF SWITCHING THE HAMMERS FOR MAX. DIAMETER 60 MM MAX. FORGING DIAMETER: 45 MM MAX. WORKPIECE LENGTH: 900 MM ADJUSTABLE FEED SPEED OF CLAMPING HEAD: 0-12 MM/SEC FORCE OF STEADY REST AT SETTING PRESSURE OF 30 BARS V. V4 CA 5 T ELECTRICAL RATED POWER: 140 KW WORKING VOLTAGE: 280 V, 50 HZ CONTROL VOLTAGE: 220 V, 50 HZ CONNECTION OF COOLING WATER: R 1 ½” INLET TEMPERATURE OF COOLING WATER: MAX. 30°C CONSUMPTION OF COOLING WATER: 9 M³/H SUPPLY OF COMPRESSED AIR: ST.R3 FIXING DIA 20 CONSUMPTION OF COMPRESSED AIR: (WATERED AIR) 1 NM³/MIN FORGING HEIGHT OVER FLOOR: 1250 MM TOTAL HEIGHT OF MACHINE: 2150 MM TOTAL LENGTH OF MACHINE: 10150 MM TOTAL WIDTH OF MACHINE (WITHOUT ELECTRICAL CONTROL CABINET): 5400 MM MACHINE WEIGHT: 22000 KG THE MACHINE COMES COMPLETELY REVAMPED WITH A NEW ELECTRICS, HYDRAULICS, NEW ORIGINAL GFM CONTROL AND WITH TEST RUN BEFORE DELIVERY. AS NEW - READY TO RUN
Vendedor: MetalEquip
Año de construcción: usado
Ubicación: Land-total plate size: 2120 x 760 mm plates size without pliers: 1900 x 600 mm thickness: 40 mm bore for bench dogs: diam. 19 mm clamping jaws left (front caliper): 500 x 55 mm jaws right (rear caliper): 470 x 120 mm clamping width front / rear caliper: 210 / 180 mm bank hook bar: 38 x 120 mm working height: 860 mm weight approx.: 73 kg comes with: drawer loading with 2 x round bench dogs short 2 x round bench dogs long cupboard with drawers eb 2 (art. no.: 14-2278)
 TOTAL PLATE SIZE: 2120 X 760 MM PLATES SIZE WITHOUT PLIERS: 1900 X 600 MM THICKNESS: 40 MM BORE FOR BENCH DOGS: DIAM. 19 MM CLAMPING JAWS LEFT (FRONT CALIPER): 500 X 55 MM JAWS RIGHT (REAR CALIPER): 470 X 120 MM CLAMPING WIDTH FRONT / REAR CALIPER: 210 / 180 MM BANK HOOK BAR: 38 X 120 MM WORKING HEIGHT: 860 MM WEIGHT APPROX.: 73 KG COMES WITH: DRAWER LOADING WITH 2 X ROUND BENCH DOGS SHORT 2 X ROUND BENCH DOGS LONG CUPBOARD WITH DRAWERS EB 2 (ART. NO.: 14-2278)
Vendedor: Weber Werkzeugmaschinen GbR
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MACHINE types: