118 ofertas

Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-shop wolf / table wolf

mado

technical data:

type: primus / mew 603 d
    5.4/3.2 a / 1.45 kw / 50 hz, 230/380 volt / 2700 rpm
    ejector housing & nut stainless steel
    screw stainless steel
    stainless steel housing
    3-tlg. unger cutting system
    performance: approx. 350 kg / hour
    bowl volume: 6 liters
    machine new stored & new belt
    function checked, device is ready to plug & immediately ready for use!

the grinder works fine, see pictures original condition!  SHOP WOLF / TABLE WOLF MADO TECHNICAL DATA: TYPE: PRIMUS / MEW 603 D 5.4/3.2 A / 1.45 KW / 50 HZ, 230/380 VOLT / 2700 RPM EJECTOR HOUSING & NUT STAINLESS STEEL SCREW STAINLESS STEEL STAINLESS STEEL HOUSING 3-TLG. UNGER CUTTING SYSTEM PERFORMANCE: APPROX. 350 KG / HOUR BOWL VOLUME: 6 LITERS MACHINE NEW STORED & NEW BELT FUNCTION CHECKED, DEVICE IS READY TO PLUG & IMMEDIATELY READY FOR USE! THE GRINDER WORKS FINE, SEE PICTURES ORIGINAL CONDITION!
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Ubicación: Land-22,8 to, 5,6 m3 sigmadozerblade, a/c, central greasing, 3 teeth ripper; power [ps]: 220; gross weight [kg]: 22890; engine: komatsusaa6d114e-3 22,8 TO, 5,6 M3 SIGMADOZERBLADE, A/C, CENTRAL GREASING, 3 TEETH RIPPER; POWER [PS]: 220; GROSS WEIGHT [KG]: 22890; ENGINE: KOMATSUSAA6D114E-3
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-mado msm 765 sl supra 70, 70 liters bowl cutter, two bowl speeds, mixing speeds, knife head with 6 knives, refurbished  MADO MSM 765 SL SUPRA 70, 70 LITERS BOWL CUTTER, TWO BOWL SPEEDS, MIXING SPEEDS, KNIFE HEAD WITH 6 KNIVES, REFURBISHED
Vendedor: DL Leasing 1988 GmbH & Co. KG
Año de construcción: usado
Ubicación: Land--type: mew 620
-diameter: 98 mm
-voltage: 400 v / 50 hz
-power: 4 kw
-dimensions: 1000 x 710 x 1100 mm
-hopper volume: 70 l
-weight: approximately 285 kg
-yield: approximately 1400 kg/h  -TYPE: MEW 620 -DIAMETER: 98 MM -VOLTAGE: 400 V / 50 HZ -POWER: 4 KW -DIMENSIONS: 1000 X 710 X 1100 MM -HOPPER VOLUME: 70 L -WEIGHT: APPROXIMATELY 285 KG -YIELD: APPROXIMATELY 1400 KG/H
Vendedor: Europ-Equipement
Año de construcción: usado
Precio: 5.900 €
Ubicación: Land-refurbished, new angle meet grinder:
 manufacturer mado
 type mew 620
 built in 2006

 two new feed snails
 feed snails overhauled gearbox
 work worm gear new
 all belt new
 belt tension roller new
 enterprise-cutting set new

surcharge of eur 900 net: new unger-blade set

 the wolf is in like new condition
  REFURBISHED, NEW ANGLE MEET GRINDER: MANUFACTURER MADO TYPE MEW 620 BUILT IN 2006 TWO NEW FEED SNAILS FEED SNAILS OVERHAULED GEARBOX WORK WORM GEAR NEW ALL BELT NEW BELT TENSION ROLLER NEW ENTERPRISE-CUTTING SET NEW SURCHARGE OF EUR 900 NET: NEW UNGER-BLADE SET THE WOLF IS IN LIKE NEW CONDITION
Vendedor: Umrath Handel & Verwertung
Año de construcción: usado
Precio: 1.750 €
Ubicación: Land-mado mwf591 patron sausage filler

volume: 12 litres
floor space wxd: 315x450mm
height: 1076mm
weight: 90kg
voltage: 230v
power: 1000w

video about test run and more pictures available MADO MWF591 PATRON SAUSAGE FILLER VOLUME: 12 LITRES FLOOR SPACE WXD: 315X450MM HEIGHT: 1076MM WEIGHT: 90KG VOLTAGE: 230V POWER: 1000W VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-burner is suitable for a sheet metal thickness up to 100 mm.
table size: 3.0 m x 2.0 m

facilities:
optical scanning unit
cnc control (with disk)
burning cutting table with associated extraction
system can be equipped with 2 burners, one is currently equipped BURNER IS SUITABLE FOR A SHEET METAL THICKNESS UP TO 100 MM. TABLE SIZE: 3.0 M X 2.0 M FACILITIES: OPTICAL SCANNING UNIT CNC CONTROL (WITH DISK) BURNING CUTTING TABLE WITH ASSOCIATED EXTRACTION SYSTEM CAN BE EQUIPPED WITH 2 BURNERS, ONE IS CURRENTLY EQUIPPED
Vendedor: KW Maschinen GmbH
Año de construcción: usado
Ubicación: Land-thermoformer
material :pp bops, ops, gpps, ps,  hips, pvc, pet
forming area (vxh):	482x355
 THERMOFORMER MATERIAL :PP BOPS, OPS, GPPS, PS, HIPS, PVC, PET FORMING AREA (VXH): 482X355
Vendedor: MachinePoint
Año de construcción: usado
Ubicación: Land-cnc burning cutting machine with optical control
manufacturer: knife
type: corta arc 2000
year of construction: 1994
cnc control: ks20

optical control with photo desktop ph19
1 oxy-fuel burner
table: 2 x 4 m
career length: 6 m
 CNC BURNING CUTTING MACHINE WITH OPTICAL CONTROL MANUFACTURER: KNIFE TYPE: CORTA ARC 2000 YEAR OF CONSTRUCTION: 1994 CNC CONTROL: KS20 OPTICAL CONTROL WITH PHOTO DESKTOP PH19 1 OXY-FUEL BURNER TABLE: 2 X 4 M CAREER LENGTH: 6 M
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 10.500 €
Ubicación: Land-mixer- grinder

mado

technical data:

type: mew 724
    6.1/8.9 kw, 400 v / 50 hz / 15.3/17.8 a
    730/1440 rpm
    year of manufacture: 2009
    holeplate 114 mm
    cutting system d 114
    cutting rate: unger set 5 pieces
    hopper volume: 120 l
    transmission rate: 1600-2200 kg / h
    dimensions w/h/d 83 x 133 x 130 cm
    a speed for central mixing unit (mixed alternately left & right)
    2 speeds for the auger
    feed screw and mixing paddles stainless
    weight: approx. 370 kg

the grinder works fine, see pictures original condition!

if you have questions, email or call.  MIXER- GRINDER MADO TECHNICAL DATA: TYPE: MEW 724 6.1/8.9 KW, 400 V / 50 HZ / 15.3/17.8 A 730/1440 RPM YEAR OF MANUFACTURE: 2009 HOLEPLATE 114 MM CUTTING SYSTEM D 114 CUTTING RATE: UNGER SET 5 PIECES HOPPER VOLUME: 120 L TRANSMISSION RATE: 1600-2200 KG / H DIMENSIONS W/H/D 83 X 133 X 130 CM A SPEED FOR CENTRAL MIXING UNIT (MIXED ALTERNATELY LEFT & RIGHT) 2 SPEEDS FOR THE AUGER FEED SCREW AND MIXING PADDLES STAINLESS WEIGHT: APPROX. 370 KG THE GRINDER WORKS FINE, SEE PICTURES ORIGINAL CONDITION! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 2.200 €
Ubicación: Land-folders for the manufacture of a standing fold (see enclosed sheet) FOLDERS FOR THE MANUFACTURE OF A STANDING FOLD (SEE ENCLOSED SHEET)
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-fold former ras 22.10

chetan thickness up to max: 1.5 mm
speed: 6 / 12 m / min.
roll number: 7
 	 
power: 3,4 kw
machine lxwxh: mm
machine weight: 490 kg
country of origin: germany FOLD FORMER RAS 22.10 CHETAN THICKNESS UP TO MAX: 1.5 MM SPEED: 6 / 12 M / MIN. ROLL NUMBER: 7 POWER: 3,4 KW MACHINE LXWXH: MM MACHINE WEIGHT: 490 KG COUNTRY OF ORIGIN: GERMANY
Vendedor: Valk Machines B.V.
Año de construcción: usado
Precio: 770 €
Ubicación: Land-here an automatic burner car is sold by the manufacturer of messer griesheim, type quicky
with a range of practical options such as double insulation and optional mains voltages of 230 v and 115 v, the quickyâ® offers an increased level of security. the speed controller ergonomically integrated in the handle allows easy use.

simple adjustment possibilities of the burner position both in height and sideways and a cutting torch, clean cuts up to 100 mm structural steel, ensuring optimum results. 

the wide range of options makes the quickyâ® the optimal cutting machine for every application.  the wide range of practical options ensures flexible handling for numerous applications. 

features:
sure: topiary simply by hand double isolated and available with 115 v and 230 v, power supply, led
capacity by default up to 100 mm cutting thickness

condition used.
see pictures

cut thickness longitudinal 3-100 mm (vertical cutting) v-cuts (mitre cuts), automatic and circular cuts for diameter 60-1500 mm. continuously variable drive 100-1100mm / min stepless height and lateral adjustment of the burner. forward / reverse and overrunning clutch. 

for any further questions email or tel. 0160/3655231  
 HERE AN AUTOMATIC BURNER CAR IS SOLD BY THE MANUFACTURER OF MESSER GRIESHEIM, TYPE QUICKY WITH A RANGE OF PRACTICAL OPTIONS SUCH AS DOUBLE INSULATION AND OPTIONAL MAINS VOLTAGES OF 230 V AND 115 V, THE QUICKY® OFFERS AN INCREASED LEVEL OF SECURITY. THE SPEED CONTROLLER ERGONOMICALLY INTEGRATED IN THE HANDLE ALLOWS EASY USE. SIMPLE ADJUSTMENT POSSIBILITIES OF THE BURNER POSITION BOTH IN HEIGHT AND SIDEWAYS AND A CUTTING TORCH, CLEAN CUTS UP TO 100 MM STRUCTURAL STEEL, ENSURING OPTIMUM RESULTS. THE WIDE RANGE OF OPTIONS MAKES THE QUICKY® THE OPTIMAL CUTTING MACHINE FOR EVERY APPLICATION. THE WIDE RANGE OF PRACTICAL OPTIONS ENSURES FLEXIBLE HANDLING FOR NUMEROUS APPLICATIONS. FEATURES: SURE: TOPIARY SIMPLY BY HAND DOUBLE ISOLATED AND AVAILABLE WITH 115 V AND 230 V, POWER SUPPLY, LED CAPACITY BY DEFAULT UP TO 100 MM CUTTING THICKNESS CONDITION USED. SEE PICTURES CUT THICKNESS LONGITUDINAL 3-100 MM (VERTICAL CUTTING) V-CUTS (MITRE CUTS), AUTOMATIC AND CIRCULAR CUTS FOR DIAMETER 60-1500 MM. CONTINUOUSLY VARIABLE DRIVE 100-1100MM / MIN STEPLESS HEIGHT AND LATERAL ADJUSTMENT OF THE BURNER. FORWARD / REVERSE AND OVERRUNNING CLUTCH. FOR ANY FURTHER QUESTIONS EMAIL OR TEL. 0160/3655231
Vendedor: Herr Karl-Heinz Menzinger
Año de construcción: usado
Ubicación: Land-grader aew delford
year : 2003
number of gates : 12
max weight: 2000g
min weight : 20 gr
prepared for bags, or boxes
gate length : 40 cm
weigh bridge length : 50 cm
 GRADER AEW DELFORD YEAR : 2003 NUMBER OF GATES : 12 MAX WEIGHT: 2000G MIN WEIGHT : 20 GR PREPARED FOR BAGS, OR BOXES GATE LENGTH : 40 CM WEIGH BRIDGE LENGTH : 50 CM
Vendedor: GearLink lda
Año de construcción: usado
Ubicación: Land-make illig
model rdkp 72d
year 1997
delivery date immediately
stations forming, cutting and stacking
maximum forming area 680 x 500 mm
depth of draw 120 / 120 mm
film width 720 mm
max cycles/min 38
max index length 530 mm
tool closing force 180 kn
total connected load 40 kw
air consumption / cycle 322 nl
punching force 600 kn

all details are subject to change and/or errors.
all equipment is subject to availability and/or prior sale. MAKE ILLIG MODEL RDKP 72D YEAR 1997 DELIVERY DATE IMMEDIATELY STATIONS FORMING, CUTTING AND STACKING MAXIMUM FORMING AREA 680 X 500 MM DEPTH OF DRAW 120 / 120 MM FILM WIDTH 720 MM MAX CYCLES/MIN 38 MAX INDEX LENGTH 530 MM TOOL CLOSING FORCE 180 KN TOTAL CONNECTED LOAD 40 KW AIR CONSUMPTION / CYCLE 322 NL PUNCHING FORCE 600 KN ALL DETAILS ARE SUBJECT TO CHANGE AND/OR ERRORS. ALL EQUIPMENT IS SUBJECT TO AVAILABILITY AND/OR PRIOR SALE.
Vendedor: Prola Ltd
Año de construcción: usado
Ubicación: Land-make illig
model rv 53
year 1992
delivery date immediately
stations forming and cutting
maximum forming area 500 x 350 mm
minimum forming area 300 x 100 mm
height of forming above-below material 100 / 30 mm
maximum cycles-minute 20
total width incl control cabinet 1930 mm
total length incl roll stand 6330 mm
total height 2050 mm
total weight 3000 kg

all details are subject to change and/or errors. all equipment is subject to availability and/or prior sale. MAKE ILLIG MODEL RV 53 YEAR 1992 DELIVERY DATE IMMEDIATELY STATIONS FORMING AND CUTTING MAXIMUM FORMING AREA 500 X 350 MM MINIMUM FORMING AREA 300 X 100 MM HEIGHT OF FORMING ABOVE-BELOW MATERIAL 100 / 30 MM MAXIMUM CYCLES-MINUTE 20 TOTAL WIDTH INCL CONTROL CABINET 1930 MM TOTAL LENGTH INCL ROLL STAND 6330 MM TOTAL HEIGHT 2050 MM TOTAL WEIGHT 3000 KG ALL DETAILS ARE SUBJECT TO CHANGE AND/OR ERRORS. ALL EQUIPMENT IS SUBJECT TO AVAILABILITY AND/OR PRIOR SALE.
Vendedor: Prola Ltd
Año de construcción: usado
Ubicación: Land-multivac r275cd thermoformer for skin and map packaging
this line is a fully automatic weighing (bilwinco), filling (conveyor belt and groneweg) and packing (multivac r275cd) line.
multivac can also be sold separate.

for a quick overview have a look at the video below.

bilwinco multihead weigher
the production starts with a bilwinco 14 head stainless steel multihead weigher. this 14-head weigher is de-signed for the wet/dry food industry. the bw114w will weigh portions of up to 1000g at a speed of up to 130 portions per minute. the special design of the weighing buckets ensures a considerable noise reduction during the weighing process.
because of the conical design of the machine and the buckets this bilwinco can handle products very gently.
this machine is equipped with a collection gate. this increases the speed of the machine and also prevents damaging of the products.
the control unit of the multihead weigher is supplied with an ip65 touch screen with ethernet interface running on windows.
this bilwinco has a camera installed to be able to constantly monitor the production on top of the machine and also give a signal to the feeding conveyor belt to give more product for constant production.
groneweg filling machine
the filling of the fixed weight portions done by the bilwinco are transported and filled to the multivac by a very sophisticated  conveyor belt and groneweg filling machine. the portions are 1 by 1 dropped by the conveyor belt, the groneweg can divide each portions into each separate tray of the multivac. controlled by a central computer that arranges the whole line up to the multivac. therefore no manual labour is required.

multivac r275cd map/skin-pack
multivac r275cd thermoformer capable of doing map (modified atmosphere packing) and skin-pack. skin pack (or darfresh) is a film tightly secured around the product with a strong vacuum. for a very nice presentation of the product and longer shelflife benefits for numerous products.
the multivac is equipped with 2 strong busch pumps for the forming of the trays and for the vacuum necessary for the packing. also equipped with 2 labellers for the top and the bottom of the tray. the top labeller has a printer for extra information like packing dates, barcodes etc.
general benefits;

fully automatic weighing, filling and multivac packing line.
complete for map (modified atmosphere packing with vacuum and gas) 2 moulds available for map
skin-packing with multivac and cryovac darfresh technology with mould available.
build-in vacuum pumps by busch.
top labelling with printing head and bottom labelling device. (multivac mr6388)
only 359 production hours, machine is like new. MULTIVAC R275CD THERMOFORMER FOR SKIN AND MAP PACKAGING THIS LINE IS A FULLY AUTOMATIC WEIGHING (BILWINCO), FILLING (CONVEYOR BELT AND GRONEWEG) AND PACKING (MULTIVAC R275CD) LINE. MULTIVAC CAN ALSO BE SOLD SEPARATE. FOR A QUICK OVERVIEW HAVE A LOOK AT THE VIDEO BELOW. BILWINCO MULTIHEAD WEIGHER THE PRODUCTION STARTS WITH A BILWINCO 14 HEAD STAINLESS STEEL MULTIHEAD WEIGHER. THIS 14-HEAD WEIGHER IS DE-SIGNED FOR THE WET/DRY FOOD INDUSTRY. THE BW114W WILL WEIGH PORTIONS OF UP TO 1000G AT A SPEED OF UP TO 130 PORTIONS PER MINUTE. THE SPECIAL DESIGN OF THE WEIGHING BUCKETS ENSURES A CONSIDERABLE NOISE REDUCTION DURING THE WEIGHING PROCESS. BECAUSE OF THE CONICAL DESIGN OF THE MACHINE AND THE BUCKETS THIS BILWINCO CAN HANDLE PRODUCTS VERY GENTLY. THIS MACHINE IS EQUIPPED WITH A COLLECTION GATE. THIS INCREASES THE SPEED OF THE MACHINE AND ALSO PREVENTS DAMAGING OF THE PRODUCTS. THE CONTROL UNIT OF THE MULTIHEAD WEIGHER IS SUPPLIED WITH AN IP65 TOUCH SCREEN WITH ETHERNET INTERFACE RUNNING ON WINDOWS. THIS BILWINCO HAS A CAMERA INSTALLED TO BE ABLE TO CONSTANTLY MONITOR THE PRODUCTION ON TOP OF THE MACHINE AND ALSO GIVE A SIGNAL TO THE FEEDING CONVEYOR BELT TO GIVE MORE PRODUCT FOR CONSTANT PRODUCTION. GRONEWEG FILLING MACHINE THE FILLING OF THE FIXED WEIGHT PORTIONS DONE BY THE BILWINCO ARE TRANSPORTED AND FILLED TO THE MULTIVAC BY A VERY SOPHISTICATED CONVEYOR BELT AND GRONEWEG FILLING MACHINE. THE PORTIONS ARE 1 BY 1 DROPPED BY THE CONVEYOR BELT, THE GRONEWEG CAN DIVIDE EACH PORTIONS INTO EACH SEPARATE TRAY OF THE MULTIVAC. CONTROLLED BY A CENTRAL COMPUTER THAT ARRANGES THE WHOLE LINE UP TO THE MULTIVAC. THEREFORE NO MANUAL LABOUR IS REQUIRED. MULTIVAC R275CD MAP/SKIN-PACK MULTIVAC R275CD THERMOFORMER CAPABLE OF DOING MAP (MODIFIED ATMOSPHERE PACKING) AND SKIN-PACK. SKIN PACK (OR DARFRESH) IS A FILM TIGHTLY SECURED AROUND THE PRODUCT WITH A STRONG VACUUM. FOR A VERY NICE PRESENTATION OF THE PRODUCT AND LONGER SHELFLIFE BENEFITS FOR NUMEROUS PRODUCTS. THE MULTIVAC IS EQUIPPED WITH 2 STRONG BUSCH PUMPS FOR THE FORMING OF THE TRAYS AND FOR THE VACUUM NECESSARY FOR THE PACKING. ALSO EQUIPPED WITH 2 LABELLERS FOR THE TOP AND THE BOTTOM OF THE TRAY. THE TOP LABELLER HAS A PRINTER FOR EXTRA INFORMATION LIKE PACKING DATES, BARCODES ETC. GENERAL BENEFITS; FULLY AUTOMATIC WEIGHING, FILLING AND MULTIVAC PACKING LINE. COMPLETE FOR MAP (MODIFIED ATMOSPHERE PACKING WITH VACUUM AND GAS) 2 MOULDS AVAILABLE FOR MAP SKIN-PACKING WITH MULTIVAC AND CRYOVAC DARFRESH TECHNOLOGY WITH MOULD AVAILABLE. BUILD-IN VACUUM PUMPS BY BUSCH. TOP LABELLING WITH PRINTING HEAD AND BOTTOM LABELLING DEVICE. (MULTIVAC MR6388) ONLY 359 PRODUCTION HOURS, MACHINE IS LIKE NEW.
Vendedor: Scotraco B.V.
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-thermoforming vacuum forming-cutting-stacking
year: 1988
hours 12350 h technical specifications: forming area (vxh): 54x60, 5 material thickness (min): 0.25 mm material thickness (max): 1.80 mm number of stations: 3 products type: container feeding systems: roll fed film reel diameter: 1000 mm
transport accuracy (measured at skeleton): +-0.2 mm
vacuum pump suction power: 200 m3/h
connected electrical power 380v
movie level: 1300 mm
max speed: 3-8 cycle minute cutting force: 50,000 than
heating connected electric power: 6.4 kw
max heating plate temperature: 200 degrees c
cooling capacity for heating: 15,000 kj/h
mounting height or tool to upper table max/min: 140/80 mm
mounting height or tool to lower table: 60 mm

total electric power with lower heating and cutting heating: 29 kw
max diameter or waste reel (skeleton): 600 mm
machine weight: 6600 kg

it is regularly maintained

this machine is designed for top and bottom moulds.
it just depends on whether it is a positive or negative mold.
in both cases it is possible.
machine in very good condition
serial number:
34.117/73

THERMOFORMING VACUUM FORMING-CUTTING-STACKING YEAR: 1988 HOURS 12350 H TECHNICAL SPECIFICATIONS: FORMING AREA (VXH): 54X60, 5 MATERIAL THICKNESS (MIN): 0.25 MM MATERIAL THICKNESS (MAX): 1.80 MM NUMBER OF STATIONS: 3 PRODUCTS TYPE: CONTAINER FEEDING SYSTEMS: ROLL FED FILM REEL DIAMETER: 1000 MM TRANSPORT ACCURACY (MEASURED AT SKELETON): +-0.2 MM VACUUM PUMP SUCTION POWER: 200 M3/H CONNECTED ELECTRICAL POWER 380V MOVIE LEVEL: 1300 MM MAX SPEED: 3-8 CYCLE MINUTE CUTTING FORCE: 50,000 THAN HEATING CONNECTED ELECTRIC POWER: 6.4 KW MAX HEATING PLATE TEMPERATURE: 200 DEGREES C COOLING CAPACITY FOR HEATING: 15,000 KJ/H MOUNTING HEIGHT OR TOOL TO UPPER TABLE MAX/MIN: 140/80 MM MOUNTING HEIGHT OR TOOL TO LOWER TABLE: 60 MM TOTAL ELECTRIC POWER WITH LOWER HEATING AND CUTTING HEATING: 29 KW MAX DIAMETER OR WASTE REEL (SKELETON): 600 MM MACHINE WEIGHT: 6600 KG IT IS REGULARLY MAINTAINED THIS MACHINE IS DESIGNED FOR TOP AND BOTTOM MOULDS. IT JUST DEPENDS ON WHETHER IT IS A POSITIVE OR NEGATIVE MOLD. IN BOTH CASES IT IS POSSIBLE. MACHINE IN VERY GOOD CONDITION SERIAL NUMBER: 34.117/73
Vendedor: Gutenberg Grafishe Machines B.V.
Año de construcción: usado
Ubicación: Land-agk table for fish gutting

manufactured year: 2004

condition: excellent

designed for semi-manual processing fish. equipped with a special hook for hanging fish before gutting, device for suction offals and automatic brush for final cleaning of flesh. 

suitable for small restaurants, buffets and fish shops.

an operator can reach capacity in gutting up to 400 per hour.  

power: 0,38 kw

voltage: 380 v \ 50 hz

dimensions (lxwxh): 1200 x 600 x 850 mm

construction of table and order of tools required to all hygiene and safety demands. all internal organs and blood accurately carrying away by the suction device. AGK TABLE FOR FISH GUTTING MANUFACTURED YEAR: 2004 CONDITION: EXCELLENT DESIGNED FOR SEMI-MANUAL PROCESSING FISH. EQUIPPED WITH A SPECIAL HOOK FOR HANGING FISH BEFORE GUTTING, DEVICE FOR SUCTION OFFALS AND AUTOMATIC BRUSH FOR FINAL CLEANING OF FLESH. SUITABLE FOR SMALL RESTAURANTS, BUFFETS AND FISH SHOPS. AN OPERATOR CAN REACH CAPACITY IN GUTTING UP TO 400 PER HOUR. POWER: 0,38 KW VOLTAGE: 380 V \ 50 HZ DIMENSIONS (LXWXH): 1200 X 600 X 850 MM CONSTRUCTION OF TABLE AND ORDER OF TOOLS REQUIRED TO ALL HYGIENE AND SAFETY DEMANDS. ALL INTERNAL ORGANS AND BLOOD ACCURATELY CARRYING AWAY BY THE SUCTION DEVICE.
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-baader 581 filleting and belly trim machine for salmon and trout

condition: good, working

capacity: 25 fish per minute

size range: 2 - 7 kg

best fillet quality: clean end of heading, clean anal fin, no bone chips at tail area and white belly membrane on or off (c/d trim) BAADER 581 FILLETING AND BELLY TRIM MACHINE FOR SALMON AND TROUT CONDITION: GOOD, WORKING CAPACITY: 25 FISH PER MINUTE SIZE RANGE: 2 - 7 KG BEST FILLET QUALITY: CLEAN END OF HEADING, CLEAN ANAL FIN, NO BONE CHIPS AT TAIL AREA AND WHITE BELLY MEMBRANE ON OR OFF (C/D TRIM)
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-mustad autoline coastal system

manufactured year: 2006

condition: good, working

this line provides strong and proven solutions for vessels from approximately 10 meters, depending on the stability and deck space on board. setting and hauling 8.000 - 30.000 hooks in in-shore and often rocky sea-beds. can also combine different gear depending on seasons. 

advantages:

great return of investment by increased productivity, more hooks, and fewer bait expenses
less labor in a safer working environment 
ready to leave whenever - finished when you return to harbor 
easily adaptable to seasonal fisheries 
the attractive workspace also for generations to come 
the line consists of the next equipment:

1. hook separator hs sp 1000 

the main function of the hookseparator sp2000 is to separate the hoooks from the mainline and guide them onto the storage magazines. this is done automatically as the line is hauled onboard. the hookseparator is also a slack taker keeping tension on the line coming from the main hauler. 

2. baiter, coastal machine sb ez 1210


at three to four hooks per second the ma bm 3000 autobaiter cuts the bait at a pre-set size and baits the hooks consistently at a speed of up to 180 - 200 hooks per minute (3 - 4 hooks per second).

the bait is placed on a spiked conveyor belt that feeds it into the machine where the hooks trigger a knife to cut the bait at a pre-set size. equipped with the patented rotobaiter baiting system the bait is penetrated twice onto the hook before it's deployed over the stern.

3. hauling unit

4. magpacker system

it is a compact and functional storage of magazines loaded with hooks and line, tailored to available space on board the vessel. delivered with spacings between the magazines: 160 mm spacing < = 11 mm main line MUSTAD AUTOLINE COASTAL SYSTEM MANUFACTURED YEAR: 2006 CONDITION: GOOD, WORKING THIS LINE PROVIDES STRONG AND PROVEN SOLUTIONS FOR VESSELS FROM APPROXIMATELY 10 METERS, DEPENDING ON THE STABILITY AND DECK SPACE ON BOARD. SETTING AND HAULING 8.000 - 30.000 HOOKS IN IN-SHORE AND OFTEN ROCKY SEA-BEDS. CAN ALSO COMBINE DIFFERENT GEAR DEPENDING ON SEASONS. ADVANTAGES: GREAT RETURN OF INVESTMENT BY INCREASED PRODUCTIVITY, MORE HOOKS, AND FEWER BAIT EXPENSES LESS LABOR IN A SAFER WORKING ENVIRONMENT READY TO LEAVE WHENEVER - FINISHED WHEN YOU RETURN TO HARBOR EASILY ADAPTABLE TO SEASONAL FISHERIES THE ATTRACTIVE WORKSPACE ALSO FOR GENERATIONS TO COME THE LINE CONSISTS OF THE NEXT EQUIPMENT: 1. HOOK SEPARATOR HS SP 1000 THE MAIN FUNCTION OF THE HOOKSEPARATOR SP2000 IS TO SEPARATE THE HOOOKS FROM THE MAINLINE AND GUIDE THEM ONTO THE STORAGE MAGAZINES. THIS IS DONE AUTOMATICALLY AS THE LINE IS HAULED ONBOARD. THE HOOKSEPARATOR IS ALSO A SLACK TAKER KEEPING TENSION ON THE LINE COMING FROM THE MAIN HAULER. 2. BAITER, COASTAL MACHINE SB EZ 1210 AT THREE TO FOUR HOOKS PER SECOND THE MA BM 3000 AUTOBAITER CUTS THE BAIT AT A PRE-SET SIZE AND BAITS THE HOOKS CONSISTENTLY AT A SPEED OF UP TO 180 - 200 HOOKS PER MINUTE (3 - 4 HOOKS PER SECOND). THE BAIT IS PLACED ON A SPIKED CONVEYOR BELT THAT FEEDS IT INTO THE MACHINE WHERE THE HOOKS TRIGGER A KNIFE TO CUT THE BAIT AT A PRE-SET SIZE. EQUIPPED WITH THE PATENTED ROTOBAITER BAITING SYSTEM THE BAIT IS PENETRATED TWICE ONTO THE HOOK BEFORE IT'S DEPLOYED OVER THE STERN. 3. HAULING UNIT 4. MAGPACKER SYSTEM IT IS A COMPACT AND FUNCTIONAL STORAGE OF MAGAZINES LOADED WITH HOOKS AND LINE, TAILORED TO AVAILABLE SPACE ON BOARD THE VESSEL. DELIVERED WITH SPACINGS BETWEEN THE MAGAZINES: 160 MM SPACING < = 11 MM MAIN LINE
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-marel m3000 grader for 6 gates with bulk feeder

condition: good, working

single lane grader for raw material (fish, chicken, poultry, and meat). equipped with baskets and high-precision dynamic weighing unit.

the grader is able to sort production into 6 groups. it also has a batching function.

equipped with dynamic scales, separator with 6 gates, packing tables and out-feeding conveyor under the separator.

the machine is easy to set-up and operate. equipped with the user-friendly m3000 graphical interface.

m3000 industrial controller provides full production control. it also features flexible access control, which prevents unauthorized personnel from changing settings. when needed, the m3000 can also control in-feed and take away systems.

high-quality components to ensure long life and low maintenance. it is quick and easy to put the grader in a washing position that gives access to all parts that need to be cleaned.

additionally equipped with bulk feeder. MAREL M3000 GRADER FOR 6 GATES WITH BULK FEEDER CONDITION: GOOD, WORKING SINGLE LANE GRADER FOR RAW MATERIAL (FISH, CHICKEN, POULTRY, AND MEAT). EQUIPPED WITH BASKETS AND HIGH-PRECISION DYNAMIC WEIGHING UNIT. THE GRADER IS ABLE TO SORT PRODUCTION INTO 6 GROUPS. IT ALSO HAS A BATCHING FUNCTION. EQUIPPED WITH DYNAMIC SCALES, SEPARATOR WITH 6 GATES, PACKING TABLES AND OUT-FEEDING CONVEYOR UNDER THE SEPARATOR. THE MACHINE IS EASY TO SET-UP AND OPERATE. EQUIPPED WITH THE USER-FRIENDLY M3000 GRAPHICAL INTERFACE. M3000 INDUSTRIAL CONTROLLER PROVIDES FULL PRODUCTION CONTROL. IT ALSO FEATURES FLEXIBLE ACCESS CONTROL, WHICH PREVENTS UNAUTHORIZED PERSONNEL FROM CHANGING SETTINGS. WHEN NEEDED, THE M3000 CAN ALSO CONTROL IN-FEED AND TAKE AWAY SYSTEMS. HIGH-QUALITY COMPONENTS TO ENSURE LONG LIFE AND LOW MAINTENANCE. IT IS QUICK AND EASY TO PUT THE GRADER IN A WASHING POSITION THAT GIVES ACCESS TO ALL PARTS THAT NEED TO BE CLEANED. ADDITIONALLY EQUIPPED WITH BULK FEEDER.
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-the norfo beheading machine type 524 is specially developed for beheading salmon and similar types of fish with a total length of 30 to 70 cm. the machine meets the special demands set for beheading of these fish species.

the fish is placed with the gills on the feeding rail of the beheading machine with the belly towards the knives. by adjusting the height of the feeding rails the position of the cut is determined and thus also if the collarbone follows the head or the body. two spiked belts catch the fish and take it through 2 oblique positioned circular knives, which together with an adjustable plate, bends the head backward, and thus makes a perfect wedge-shaped cut, by means of which an optimal yield of the fish is obtained.

depending upon the operator routine the capacity can be up to 40 fish per minute.

all necessary adjustments when changing fish size/species are easily done and without use of tools.

it has a centrally placed emergency stop and a safety bar, which is activated if unexpected situations arise.

when beheading salmon, size 4-5 kg, with the collarbone placed on the body, the yield percentage to be obtained will be 92-93%. to compare this the yield percentage without collarbone will be 90-91%.

dimensions (lxwxh): approximately 900 x 850 x 1950 mm

weight: approximately 150 kg THE NORFO BEHEADING MACHINE TYPE 524 IS SPECIALLY DEVELOPED FOR BEHEADING SALMON AND SIMILAR TYPES OF FISH WITH A TOTAL LENGTH OF 30 TO 70 CM. THE MACHINE MEETS THE SPECIAL DEMANDS SET FOR BEHEADING OF THESE FISH SPECIES. THE FISH IS PLACED WITH THE GILLS ON THE FEEDING RAIL OF THE BEHEADING MACHINE WITH THE BELLY TOWARDS THE KNIVES. BY ADJUSTING THE HEIGHT OF THE FEEDING RAILS THE POSITION OF THE CUT IS DETERMINED AND THUS ALSO IF THE COLLARBONE FOLLOWS THE HEAD OR THE BODY. TWO SPIKED BELTS CATCH THE FISH AND TAKE IT THROUGH 2 OBLIQUE POSITIONED CIRCULAR KNIVES, WHICH TOGETHER WITH AN ADJUSTABLE PLATE, BENDS THE HEAD BACKWARD, AND THUS MAKES A PERFECT WEDGE-SHAPED CUT, BY MEANS OF WHICH AN OPTIMAL YIELD OF THE FISH IS OBTAINED. DEPENDING UPON THE OPERATOR ROUTINE THE CAPACITY CAN BE UP TO 40 FISH PER MINUTE. ALL NECESSARY ADJUSTMENTS WHEN CHANGING FISH SIZE/SPECIES ARE EASILY DONE AND WITHOUT USE OF TOOLS. IT HAS A CENTRALLY PLACED EMERGENCY STOP AND A SAFETY BAR, WHICH IS ACTIVATED IF UNEXPECTED SITUATIONS ARISE. WHEN BEHEADING SALMON, SIZE 4-5 KG, WITH THE COLLARBONE PLACED ON THE BODY, THE YIELD PERCENTAGE TO BE OBTAINED WILL BE 92-93%. TO COMPARE THIS THE YIELD PERCENTAGE WITHOUT COLLARBONE WILL BE 90-91%. DIMENSIONS (LXWXH): APPROXIMATELY 900 X 850 X 1950 MM WEIGHT: APPROXIMATELY 150 KG
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-cnc portal cutting machine
manufacturer: zinser
type: 3005
year of construction: 1995
cnc control: cnc 500

3 oxy-fuel burner
work area: 2,500 x 10.000 mm incl. table
 CNC PORTAL CUTTING MACHINE MANUFACTURER: ZINSER TYPE: 3005 YEAR OF CONSTRUCTION: 1995 CNC CONTROL: CNC 500 3 OXY-FUEL BURNER WORK AREA: 2,500 X 10.000 MM INCL. TABLE
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-package two cylinder

illig msz 600 year : 2008

illig msz 600 year : 2004

 

price for package 6000,00€ loaded on truck

 

 

for more information, do not hesitate to contact us snvimachinery@gmail 

 


 

mathieu moise

snvi energy graphic sasu
siège social : 22 rue du camp - 93230 romainville - france
siret 83067130100018 - r.c.s. bobigny
0033688070964
 PACKAGE TWO CYLINDER ILLIG MSZ 600 YEAR : 2008 ILLIG MSZ 600 YEAR : 2004 PRICE FOR PACKAGE 6000,00€ LOADED ON TRUCK FOR MORE INFORMATION, DO NOT HESITATE TO CONTACT US SNVIMACHINERY@GMAIL MATHIEU MOISE SNVI ENERGY GRAPHIC SASU SIèGE SOCIAL : 22 RUE DU CAMP - 93230 ROMAINVILLE - FRANCE SIRET 83067130100018 - R.C.S. BOBIGNY 0033688070964
Vendedor: SNVI ENERGY
Año de construcción: usado
Ubicación: Land-coating or spray line for meat/fish/vegetables/tk products
consisting of 2 units (water discharge with direct steam heating and marieniereinheit with blow-off), made completely of stainless steel.
unit for spraying food with water.
recycled water is automatically canceled by the product.

the spraying of the product is carried out by top and bottom separate tray for water, heated with steam, water circuit can be heated by the circulation pump over direct steam injection.
slowly running stainless steel mesh band (teflon glide stored)
task table:
width 100 cm
length 240cm
height 125cm

pickling unit with blow-off device can be activated optionally
circulation circuit for a liquid marinade, two pump drives as slow-speed centrifugal pump, flying separately controllable stored for top and bottom curtain of marinating.
made completely of stainless steel
working width 100 cm
working height 120 cm
length 140cm
 COATING OR SPRAY LINE FOR MEAT/FISH/VEGETABLES/TK PRODUCTS CONSISTING OF 2 UNITS (WATER DISCHARGE WITH DIRECT STEAM HEATING AND MARIENIEREINHEIT WITH BLOW-OFF), MADE COMPLETELY OF STAINLESS STEEL. UNIT FOR SPRAYING FOOD WITH WATER. RECYCLED WATER IS AUTOMATICALLY CANCELED BY THE PRODUCT. THE SPRAYING OF THE PRODUCT IS CARRIED OUT BY TOP AND BOTTOM SEPARATE TRAY FOR WATER, HEATED WITH STEAM, WATER CIRCUIT CAN BE HEATED BY THE CIRCULATION PUMP OVER DIRECT STEAM INJECTION. SLOWLY RUNNING STAINLESS STEEL MESH BAND (TEFLON GLIDE STORED) TASK TABLE: WIDTH 100 CM LENGTH 240CM HEIGHT 125CM PICKLING UNIT WITH BLOW-OFF DEVICE CAN BE ACTIVATED OPTIONALLY CIRCULATION CIRCUIT FOR A LIQUID MARINADE, TWO PUMP DRIVES AS SLOW-SPEED CENTRIFUGAL PUMP, FLYING SEPARATELY CONTROLLABLE STORED FOR TOP AND BOTTOM CURTAIN OF MARINATING. MADE COMPLETELY OF STAINLESS STEEL WORKING WIDTH 100 CM WORKING HEIGHT 120 CM LENGTH 140CM
Vendedor: Prime Catch Seafood GmbH
Año de construcción: usado
Ubicación: Land-max. forming area in forming/punching operation: 756x565 mm
min./max. film width: 805 mm
pos./neg. depth of draw: 120 / 120 mm
max. material thickness: 2,5 mm
max. feed length: 583 mm
forming/cutting force: 75.000 dna

illig stal 80 trim press could be offered inline MAX. FORMING AREA IN FORMING/PUNCHING OPERATION: 756X565 MM MIN./MAX. FILM WIDTH: 805 MM POS./NEG. DEPTH OF DRAW: 120 / 120 MM MAX. MATERIAL THICKNESS: 2,5 MM MAX. FEED LENGTH: 583 MM FORMING/CUTTING FORCE: 75.000 DNA ILLIG STAL 80 TRIM PRESS COULD BE OFFERED INLINE
Vendedor: Mega Plast GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-processing size 6000 x 2000 mm software nc cut 32 PROCESSING SIZE 6000 X 2000 MM SOFTWARE NC CUT 32
Vendedor: Herr Walter Volk
Año de construcción: usado
Ubicación: Land-complete system
capacity 80 ton per hour COMPLETE SYSTEM CAPACITY 80 TON PER HOUR
Vendedor: HHHTRADING
Año de construcción: usado
Ubicación: Land-roller grader
14 rollers
include infeed elevator
include 3x cross outfeed conveyors
4 grades

 ROLLER GRADER 14 ROLLERS INCLUDE INFEED ELEVATOR INCLUDE 3X CROSS OUTFEED CONVEYORS 4 GRADES
Vendedor: HHHTRADING
Año de construcción: usado
Ubicación: Land-thermoforming illig rv 74


size :  700x500

year : 1997

hours : 43483h

 

good condition france / available now

price 40000,00€ loaded on truck 


 

thermoforming illig rv 74


size :  700x500

year : 1993

hours : 40000 hours

 

good condition france / available now

price 25000,00€ loaded on truck 


 

thermoforming illig rv 53

size : 500x350 

year : 1990

lower mobile table 

 

good condition france / available now

price 23500,00€ loaded on truck


 

thermoforming illig rv 53

size : 500x350 

year : 1989

fixe mobile table 

 

good condition france / available now

price 15500,00€ loaded on truck


 

illig sb74 c4 shin-pack

size : 505 x 775 

year : 1983

renovated machine, repainted.

 

good condition france / available now

makke best offer


 

machine illig sb74 unwinder. thermotransverse cutter.

size : 500 x 700  

year : 1981

 

good condition france / available now

makke best offer


 

 

machine illig sb74 unwinder. thermotransverse cutter.

size : 500 x 700  

year : 1981

year: rebuilt machine, repainted in august 2006

 

good condition france / available now

makke best offer

 

machine illig sb53

size : 350x500  

year : 1986

max. drawing depth 200 mm 

 

good condition france / available now

price 65500,00€ loaded on truck


 

machine waiting to happen:

-2x cylinder illig a whit a green

-illig hsa 30

 

 

 

for more information, do not hesitate to contact us.

 

if you are looking for specific machines, please let us know with our network we can find it




snvi energy graphic sasu

siÈge social : 22 rue du camp - 93230 romainville - france

tel : 01 57 14 99 19 / mobile : 06 88 07 09 64  THERMOFORMING ILLIG RV 74 SIZE : 700X500 YEAR : 1997 HOURS : 43483H GOOD CONDITION FRANCE / AVAILABLE NOW PRICE 40000,00€ LOADED ON TRUCK THERMOFORMING ILLIG RV 74 SIZE : 700X500 YEAR : 1993 HOURS : 40000 HOURS GOOD CONDITION FRANCE / AVAILABLE NOW PRICE 25000,00€ LOADED ON TRUCK THERMOFORMING ILLIG RV 53 SIZE : 500X350 YEAR : 1990 LOWER MOBILE TABLE GOOD CONDITION FRANCE / AVAILABLE NOW PRICE 23500,00€ LOADED ON TRUCK THERMOFORMING ILLIG RV 53 SIZE : 500X350 YEAR : 1989 FIXE MOBILE TABLE GOOD CONDITION FRANCE / AVAILABLE NOW PRICE 15500,00€ LOADED ON TRUCK ILLIG SB74 C4 SHIN-PACK SIZE : 505 X 775 YEAR : 1983 RENOVATED MACHINE, REPAINTED. GOOD CONDITION FRANCE / AVAILABLE NOW MAKKE BEST OFFER MACHINE ILLIG SB74 UNWINDER. THERMOTRANSVERSE CUTTER. SIZE : 500 X 700 YEAR : 1981 GOOD CONDITION FRANCE / AVAILABLE NOW MAKKE BEST OFFER MACHINE ILLIG SB74 UNWINDER. THERMOTRANSVERSE CUTTER. SIZE : 500 X 700 YEAR : 1981 YEAR: REBUILT MACHINE, REPAINTED IN AUGUST 2006 GOOD CONDITION FRANCE / AVAILABLE NOW MAKKE BEST OFFER MACHINE ILLIG SB53 SIZE : 350X500 YEAR : 1986 MAX. DRAWING DEPTH 200 MM GOOD CONDITION FRANCE / AVAILABLE NOW PRICE 65500,00€ LOADED ON TRUCK MACHINE WAITING TO HAPPEN: -2X CYLINDER ILLIG A WHIT A GREEN -ILLIG HSA 30 FOR MORE INFORMATION, DO NOT HESITATE TO CONTACT US. IF YOU ARE LOOKING FOR SPECIFIC MACHINES, PLEASE LET US KNOW WITH OUR NETWORK WE CAN FIND IT SNVI ENERGY GRAPHIC SASU SIÈGE SOCIAL : 22 RUE DU CAMP - 93230 ROMAINVILLE - FRANCE TEL : 01 57 14 99 19 / MOBILE : 06 88 07 09 64
Vendedor: SNVI ENERGY
Año de construcción: usado
Ubicación: Land-make kiefel
model kmv 75d
year 2005
delivery date immediately
maximum forming area 750 x 540 mm
minimum forming area 400 x 250 mm
max tool dimensions 766 x 556 mm
depth of draw 150/50 mm
max sheet width 810 mm
pressure forming upto max 2.5 bar
max cycles / min 30
approx length 12800 mm
approx width 2600 mm
approx height 2700 mm
approx weight 11,000 kg

all details are subject to change and/or errors.
all equipment is subject to availability and/or prior sale  MAKE KIEFEL MODEL KMV 75D YEAR 2005 DELIVERY DATE IMMEDIATELY MAXIMUM FORMING AREA 750 X 540 MM MINIMUM FORMING AREA 400 X 250 MM MAX TOOL DIMENSIONS 766 X 556 MM DEPTH OF DRAW 150/50 MM MAX SHEET WIDTH 810 MM PRESSURE FORMING UPTO MAX 2.5 BAR MAX CYCLES / MIN 30 APPROX LENGTH 12800 MM APPROX WIDTH 2600 MM APPROX HEIGHT 2700 MM APPROX WEIGHT 11,000 KG ALL DETAILS ARE SUBJECT TO CHANGE AND/OR ERRORS. ALL EQUIPMENT IS SUBJECT TO AVAILABILITY AND/OR PRIOR SALE
Vendedor: Prola Ltd
Año de construcción: usado
Precio: used machinery auction RESALE 45.000 €
Ubicación: Land-gea, type: powerpak rt 460 type 2
bj. / ez: 2015, ident.-no.: 24600174
performance: max 26 kw, with vacuum pump busch r 5 ra 0302 d GEA, TYPE: POWERPAK RT 460 TYPE 2 BJ. / EZ: 2015, IDENT.-NO.: 24600174 PERFORMANCE: MAX 26 KW, WITH VACUUM PUMP BUSCH R 5 RA 0302 D
Vendedor: Industrie Auktionshaus Bickel KG
Año de construcción: usado
Ubicación: Land-kraftfomer eckold, type kf665

capacity: 6 mm steel
 	8 mm aluminium
 	4 mm stainless steel
 	 
horizontal projection: 675 mm
vertical projection: 450 mm
 	 
stroke adjustment: 80 mm
huzahl: 150/300/600 p/min
 	 
equipped with:
	-set diving fwa 802/4
 	-set routes fwr 803/4
 	-foot pedal
 	 
country of origin: switzerland
machine weight: 2.000 kg KRAFTFOMER ECKOLD, TYPE KF665 CAPACITY: 6 MM STEEL 8 MM ALUMINIUM 4 MM STAINLESS STEEL HORIZONTAL PROJECTION: 675 MM VERTICAL PROJECTION: 450 MM STROKE ADJUSTMENT: 80 MM HUZAHL: 150/300/600 P/MIN EQUIPPED WITH: -SET DIVING FWA 802/4 -SET ROUTES FWR 803/4 -FOOT PEDAL COUNTRY OF ORIGIN: SWITZERLAND MACHINE WEIGHT: 2.000 KG
Vendedor: Valk Machines B.V.
Año de construcción: usado
Ubicación: Land-thermoformeusse pozzo 
format : 700x500mm
année : 1995
emboutissage: 280 mm
équipée d'un massicot

elle est adaptée au prototypage, petites et moyennes series
utilisation de toutes les matières thermoformables

machine pour la production de pièces plastiques comme :
-emballage legers, blisters
emballages pharmaceutiques
emballages alimentaires
plateaux de manutention
callages techniques et robotiques
presentoirs pour plv
capots de machines
skin pack


illig, kiefel, arburg, battenfeld, billion, demag, dk, engel, fischer, husky, ads, krauss maffei, margarit, negri bossi, netstal, sandretto, windsor, amut, andouard, baston, samafor, tecnova, vobau, illig, cb concept, automa, bekum, krupp, magic, mag, putian, sipa,uniloy comec etc.

snvi energy graphic sasu
siÈge social : 22 rue du camp - 93230 romainville - france 
tel : 01 57 14 99 19 / mobile : 06 88 07 09 64  

 THERMOFORMEUSSE POZZO FORMAT : 700X500MM ANNéE : 1995 EMBOUTISSAGE: 280 MM éQUIPéE D'UN MASSICOT ELLE EST ADAPTéE AU PROTOTYPAGE, PETITES ET MOYENNES SERIES UTILISATION DE TOUTES LES MATIèRES THERMOFORMABLES MACHINE POUR LA PRODUCTION DE PIèCES PLASTIQUES COMME : -EMBALLAGE LEGERS, BLISTERS EMBALLAGES PHARMACEUTIQUES EMBALLAGES ALIMENTAIRES PLATEAUX DE MANUTENTION CALLAGES TECHNIQUES ET ROBOTIQUES PRESENTOIRS POUR PLV CAPOTS DE MACHINES SKIN PACK ILLIG, KIEFEL, ARBURG, BATTENFELD, BILLION, DEMAG, DK, ENGEL, FISCHER, HUSKY, ADS, KRAUSS MAFFEI, MARGARIT, NEGRI BOSSI, NETSTAL, SANDRETTO, WINDSOR, AMUT, ANDOUARD, BASTON, SAMAFOR, TECNOVA, VOBAU, ILLIG, CB CONCEPT, AUTOMA, BEKUM, KRUPP, MAGIC, MAG, PUTIAN, SIPA,UNILOY COMEC ETC. SNVI ENERGY GRAPHIC SASU SIÈGE SOCIAL : 22 RUE DU CAMP - 93230 ROMAINVILLE - FRANCE TEL : 01 57 14 99 19 / MOBILE : 06 88 07 09 64
Vendedor: SNVI ENERGY
Año de construcción: usado
Ubicación: Land-illig rv 74 
year : 1997



forming area (vxh): 700x500

depth of draw: 120 mm

material thickness (min): 0,15 mm

material thickness (max): 2 mm

number of stations: 3

feeding systems:roll fed

other specifications:
forming - cutting - stacking

forming machine:
min-max forming area : 400x250-700x500
min-max film width: 440-750mm
height of parts above / below the film level: 120 / 40mm
diameter of film reel: 1200mm
connected electric power from upper-lower heater: 16.2kw
level of the film: 1300mm
max speed: 20 / min
weight: 2600kg
vacuum forming only

cutting unit :
cutting area at top and bottom table: 700x500mm
cutting height above / below film level: 120 / 40mm
cutting force: 50,000 dan
connected electric power of heating: 6.4kw
max temperature of the heating plate: 200 c
cooling capacity for heating: 15,000 kj / h
tool mounting height to upper table max / min: 140 / 80mm
tool mounting height to bottom table: 60mm
power requirement: 3kw
weight of the machine: 4.000kg

complete features forming machine + cutting unit :
max speed: 20 / min
total electric power with lower heater: 46kw
total electric power with the lower heating and heating of the cutting unit : 52.4kw
total air consumption with stroke lengths max: 35 nl
operating pressure min: 6bar
recommended compressor power (effective): 1200 nl / min
max. diameter of waste reel (skeleton): 600mm
weight of the machine: 6600kg

working hours : 43483 h.
good condition
option: lower heating; adjustment perpendicular to the feed pitch

this machine does not have the forming pressure.
assembly of tools (original standard)
reel holder included.
no regulator station.

the machine will be reassembled and tested in dry cycle before departure

for more information contact us snvimachinery@gmail ILLIG RV 74 YEAR : 1997 FORMING AREA (VXH): 700X500 DEPTH OF DRAW: 120 MM MATERIAL THICKNESS (MIN): 0,15 MM MATERIAL THICKNESS (MAX): 2 MM NUMBER OF STATIONS: 3 FEEDING SYSTEMS:ROLL FED OTHER SPECIFICATIONS: FORMING - CUTTING - STACKING FORMING MACHINE: MIN-MAX FORMING AREA : 400X250-700X500 MIN-MAX FILM WIDTH: 440-750MM HEIGHT OF PARTS ABOVE / BELOW THE FILM LEVEL: 120 / 40MM DIAMETER OF FILM REEL: 1200MM CONNECTED ELECTRIC POWER FROM UPPER-LOWER HEATER: 16.2KW LEVEL OF THE FILM: 1300MM MAX SPEED: 20 / MIN WEIGHT: 2600KG VACUUM FORMING ONLY CUTTING UNIT : CUTTING AREA AT TOP AND BOTTOM TABLE: 700X500MM CUTTING HEIGHT ABOVE / BELOW FILM LEVEL: 120 / 40MM CUTTING FORCE: 50,000 DAN CONNECTED ELECTRIC POWER OF HEATING: 6.4KW MAX TEMPERATURE OF THE HEATING PLATE: 200 C COOLING CAPACITY FOR HEATING: 15,000 KJ / H TOOL MOUNTING HEIGHT TO UPPER TABLE MAX / MIN: 140 / 80MM TOOL MOUNTING HEIGHT TO BOTTOM TABLE: 60MM POWER REQUIREMENT: 3KW WEIGHT OF THE MACHINE: 4.000KG COMPLETE FEATURES FORMING MACHINE + CUTTING UNIT : MAX SPEED: 20 / MIN TOTAL ELECTRIC POWER WITH LOWER HEATER: 46KW TOTAL ELECTRIC POWER WITH THE LOWER HEATING AND HEATING OF THE CUTTING UNIT : 52.4KW TOTAL AIR CONSUMPTION WITH STROKE LENGTHS MAX: 35 NL OPERATING PRESSURE MIN: 6BAR RECOMMENDED COMPRESSOR POWER (EFFECTIVE): 1200 NL / MIN MAX. DIAMETER OF WASTE REEL (SKELETON): 600MM WEIGHT OF THE MACHINE: 6600KG WORKING HOURS : 43483 H. GOOD CONDITION OPTION: LOWER HEATING; ADJUSTMENT PERPENDICULAR TO THE FEED PITCH THIS MACHINE DOES NOT HAVE THE FORMING PRESSURE. ASSEMBLY OF TOOLS (ORIGINAL STANDARD) REEL HOLDER INCLUDED. NO REGULATOR STATION. THE MACHINE WILL BE REASSEMBLED AND TESTED IN DRY CYCLE BEFORE DEPARTURE FOR MORE INFORMATION CONTACT US SNVIMACHINERY@GMAIL
Vendedor: SNVI ENERGY
Año de construcción: usado
Ubicación: Land-glasierer for frozen seafood.
total 3 units in different version

the devices are made completely of stainless steel is composed of different layers with spray nozzles, which apply a thin film of water on the frozen product and vibratory plates.
z. b. glasierer 1 for approximately 1000 kg per hour product run
working width (bandwidth) 120 cm

length 275cm, width 175cm, height 142cm with 4 vibration levels, which apply a permanent to ensure the product. 

 GLASIERER FOR FROZEN SEAFOOD. TOTAL 3 UNITS IN DIFFERENT VERSION THE DEVICES ARE MADE COMPLETELY OF STAINLESS STEEL IS COMPOSED OF DIFFERENT LAYERS WITH SPRAY NOZZLES, WHICH APPLY A THIN FILM OF WATER ON THE FROZEN PRODUCT AND VIBRATORY PLATES. Z. B. GLASIERER 1 FOR APPROXIMATELY 1000 KG PER HOUR PRODUCT RUN WORKING WIDTH (BANDWIDTH) 120 CM LENGTH 275CM, WIDTH 175CM, HEIGHT 142CM WITH 4 VIBRATION LEVELS, WHICH APPLY A PERMANENT TO ENSURE THE PRODUCT.
Vendedor: Prime Catch Seafood GmbH
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-
this plant takes product at a height of 250cm an edelstahlbin ca 400 kg and the tipping mechanism brings the product into a drip pan filled with water, from where it is transferred to the production line. the plant was already professionally dismantled and stored on pallets in a dry production hall.

lifting station: weight approx. 1200kg, length 180cm, width 140 cm, height 250 cm

tray: weight: about 1500 kg, length 200 cm, width 140 cm, height 110 cm
 THIS PLANT TAKES PRODUCT AT A HEIGHT OF 250CM AN EDELSTAHLBIN CA 400 KG AND THE TIPPING MECHANISM BRINGS THE PRODUCT INTO A DRIP PAN FILLED WITH WATER, FROM WHERE IT IS TRANSFERRED TO THE PRODUCTION LINE. THE PLANT WAS ALREADY PROFESSIONALLY DISMANTLED AND STORED ON PALLETS IN A DRY PRODUCTION HALL. LIFTING STATION: WEIGHT APPROX. 1200KG, LENGTH 180CM, WIDTH 140 CM, HEIGHT 250 CM TRAY: WEIGHT: ABOUT 1500 KG, LENGTH 200 CM, WIDTH 140 CM, HEIGHT 110 CM
Vendedor: Prime Catch Seafood GmbH
Año de construcción: usado
Precio: 1 €
Ubicación: Land-long version 
options: 
product presser
vacuum and gas injection
vacuum pump sogeva 300
unwinder jumbo ar1000
cl953 edge cutter exit belt conveyor
current size :
width 280 mm
size 268 mm x move  337 mm
mould 105 mm x 300 mm unitaire
space filling product  1300 mm

now coupling with  associative dosing machine
 LONG VERSION OPTIONS: PRODUCT PRESSER VACUUM AND GAS INJECTION VACUUM PUMP SOGEVA 300 UNWINDER JUMBO AR1000 CL953 EDGE CUTTER EXIT BELT CONVEYOR CURRENT SIZE : WIDTH 280 MM SIZE 268 MM X MOVE 337 MM MOULD 105 MM X 300 MM UNITAIRE SPACE FILLING PRODUCT 1300 MM NOW COUPLING WITH ASSOCIATIVE DOSING MACHINE
Vendedor: IND-EQ
Año de construcción: usado
Ubicación: Land-deheading and filleting machine for fish, total dimensions: 3300 mm x 950 mm x 1310 mm DEHEADING AND FILLETING MACHINE FOR FISH, TOTAL DIMENSIONS: 3300 MM X 950 MM X 1310 MM
Vendedor: HHHTRADING
Año de construcción: usado
Ubicación: Land-moretti vpk-c 76 - year 1998. pet, ps, pp.
roll fed, forming, cutting, stacking thermoforming machine.
forming area 700x600mm, forming depth 120mm up and down.
hydraulic drive.
fully functional and working in production mostly pet thickness 0,20mm up to 1,20mm.
new chains and tft screen.
power in=215a 3/n/pe 380v.
full documentation for the machine is available containing electric and pneumatic diagrams, parts list, mechanical parts documentation.
at extra cost on sale are 8 different thermoforming molds too. MORETTI VPK-C 76 - YEAR 1998. PET, PS, PP. ROLL FED, FORMING, CUTTING, STACKING THERMOFORMING MACHINE. FORMING AREA 700X600MM, FORMING DEPTH 120MM UP AND DOWN. HYDRAULIC DRIVE. FULLY FUNCTIONAL AND WORKING IN PRODUCTION MOSTLY PET THICKNESS 0,20MM UP TO 1,20MM. NEW CHAINS AND TFT SCREEN. POWER IN=215A 3/N/PE 380V. FULL DOCUMENTATION FOR THE MACHINE IS AVAILABLE CONTAINING ELECTRIC AND PNEUMATIC DIAGRAMS, PARTS LIST, MECHANICAL PARTS DOCUMENTATION. AT EXTRA COST ON SALE ARE 8 DIFFERENT THERMOFORMING MOLDS TOO.
Vendedor: Panex Co
Año de construcción: usado
Ubicación: Land-make kiefel
model kmv 75d
year 2005
delivery date immediately
maximum forming area 750 x 540 mm
minimum forming area 400 x 250 mm
max tool dimensions 766 x 556 mm
depth of draw 150/50 mm
max sheet width 810 mm
pressure forming upto max 2.5 bar
max cycles / min 30
approx length 12800 mm
approx width 2600 mm
approx height 2700 mm
approx weight 11,000 kg

all details are subject to change and/or errors.
all equipment is subject to availability and/or prior sale MAKE KIEFEL MODEL KMV 75D YEAR 2005 DELIVERY DATE IMMEDIATELY MAXIMUM FORMING AREA 750 X 540 MM MINIMUM FORMING AREA 400 X 250 MM MAX TOOL DIMENSIONS 766 X 556 MM DEPTH OF DRAW 150/50 MM MAX SHEET WIDTH 810 MM PRESSURE FORMING UPTO MAX 2.5 BAR MAX CYCLES / MIN 30 APPROX LENGTH 12800 MM APPROX WIDTH 2600 MM APPROX HEIGHT 2700 MM APPROX WEIGHT 11,000 KG ALL DETAILS ARE SUBJECT TO CHANGE AND/OR ERRORS. ALL EQUIPMENT IS SUBJECT TO AVAILABILITY AND/OR PRIOR SALE
Vendedor: Prola Ltd
Año de construcción: usado
Ubicación: Land-we are pleased to offer the following machine subject to prior sale

illig sb 53
year : 1986
max. shaped area 350 x 500 mm
max. drawing depth 200 mm  

 WE ARE PLEASED TO OFFER THE FOLLOWING MACHINE SUBJECT TO PRIOR SALE ILLIG SB 53 YEAR : 1986 MAX. SHAPED AREA 350 X 500 MM MAX. DRAWING DEPTH 200 MM
Vendedor: SNVI ENERGY
Año de construcción: usado
Ubicación: Land-multivac r275mf skin-pack thermoformer
professionally taken out of production, in stock week 40.
the multivac r275 mf thermoforming packaging machine enables the production of multifresh™ vacuum skin packaging in large batches. it offers a great degree of variability with regard to multifresh applications. the packs are easy to open by means of an opening aid.
high-end machine in stunning condition with many options installed
the machine has two large busch pumps installed for very fast packing cycles. depending on set-up this machine ran ±10 cycles per minute. combined with this 6 tray mould it reached 60 trays per minute.
optional jumbo film unwind for less often film changes and keep production going.
fully automatic printing and labelling system.
available from stock, delivered with many extra’s like;
many spare parts
trolley to swap moulds
several pallets of top film
pallets with jumbo rolls bottom film.
1 new spare dome (mould)
1 new forming plate
multifresh
in the case of multifresh vacuum skin packing, a special skin film is used, which envelops the product without tension like a second skin, and which seals allover to the lower web. the upper web passes through a heating station to activate the film proper- ties, and it is then pre-stretched in the sealing die. MULTIVAC R275MF SKIN-PACK THERMOFORMER PROFESSIONALLY TAKEN OUT OF PRODUCTION, IN STOCK WEEK 40. THE MULTIVAC R275 MF THERMOFORMING PACKAGING MACHINE ENABLES THE PRODUCTION OF MULTIFRESH™ VACUUM SKIN PACKAGING IN LARGE BATCHES. IT OFFERS A GREAT DEGREE OF VARIABILITY WITH REGARD TO MULTIFRESH APPLICATIONS. THE PACKS ARE EASY TO OPEN BY MEANS OF AN OPENING AID. HIGH-END MACHINE IN STUNNING CONDITION WITH MANY OPTIONS INSTALLED THE MACHINE HAS TWO LARGE BUSCH PUMPS INSTALLED FOR VERY FAST PACKING CYCLES. DEPENDING ON SET-UP THIS MACHINE RAN ±10 CYCLES PER MINUTE. COMBINED WITH THIS 6 TRAY MOULD IT REACHED 60 TRAYS PER MINUTE. OPTIONAL JUMBO FILM UNWIND FOR LESS OFTEN FILM CHANGES AND KEEP PRODUCTION GOING. FULLY AUTOMATIC PRINTING AND LABELLING SYSTEM. AVAILABLE FROM STOCK, DELIVERED WITH MANY EXTRA’S LIKE; MANY SPARE PARTS TROLLEY TO SWAP MOULDS SEVERAL PALLETS OF TOP FILM PALLETS WITH JUMBO ROLLS BOTTOM FILM. 1 NEW SPARE DOME (MOULD) 1 NEW FORMING PLATE MULTIFRESH IN THE CASE OF MULTIFRESH VACUUM SKIN PACKING, A SPECIAL SKIN FILM IS USED, WHICH ENVELOPS THE PRODUCT WITHOUT TENSION LIKE A SECOND SKIN, AND WHICH SEALS ALLOVER TO THE LOWER WEB. THE UPPER WEB PASSES THROUGH A HEATING STATION TO ACTIVATE THE FILM PROPER- TIES, AND IT IS THEN PRE-STRETCHED IN THE SEALING DIE.
Vendedor: Scotraco B.V.
Año de construcción: usado
Ubicación: Land-complete line for processing fish, meat, shrimp and
the line consists of:

defrosting system
coating line
freezer line 1
freezer line 2
defrosting system 1
defrosting system_chamber wagon
mixing station
match prediction line
multivac thermoforming packaging machine type r 275
several z conveyors
several ishida 14 multihead weighers
several tubular bag machines
cartoning line 1
cartoning line 2

for more details see video
COMPLETE LINE FOR PROCESSING FISH, MEAT, SHRIMP AND THE LINE CONSISTS OF: DEFROSTING SYSTEM COATING LINE FREEZER LINE 1 FREEZER LINE 2 DEFROSTING SYSTEM 1 DEFROSTING SYSTEM_CHAMBER WAGON MIXING STATION MATCH PREDICTION LINE MULTIVAC THERMOFORMING PACKAGING MACHINE TYPE R 275 SEVERAL Z CONVEYORS SEVERAL ISHIDA 14 MULTIHEAD WEIGHERS SEVERAL TUBULAR BAG MACHINES CARTONING LINE 1 CARTONING LINE 2 FOR MORE DETAILS SEE VIDEO
Vendedor: 1&1 Pulspack
Año de construcción: usado
Ubicación: Land-stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.
 STAINLESS HORIZONTAL FISH SLICER WITH ADJUSTABLE THICKNESS, ADJUSTABLE STROKE AND SPEED.
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-fish head cutting machine	
a stand alone de heading unit for fish in the size range 500 grams to 3 kgs. a vee cut configuration ensures capture of the meat at the top of the head above the gill plate.
 FISH HEAD CUTTING MACHINE A STAND ALONE DE HEADING UNIT FOR FISH IN THE SIZE RANGE 500 GRAMS TO 3 KGS. A VEE CUT CONFIGURATION ENSURES CAPTURE OF THE MEAT AT THE TOP OF THE HEAD ABOVE THE GILL PLATE.
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-pin bone remover
stainless frame, belt dimensions 1600mm x 350mm, roller/blade 180mm length 
 PIN BONE REMOVER STAINLESS FRAME, BELT DIMENSIONS 1600MM X 350MM, ROLLER/BLADE 180MM LENGTH
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-horizontal salmon slicing machine	
2004, single lane long slicer for horizontal slicing of fresh, cold smoked salmon and similar kinds of fish. the slicer cuts long and consistent thin slices from the total length of the product
 HORIZONTAL SALMON SLICING MACHINE 2004, SINGLE LANE LONG SLICER FOR HORIZONTAL SLICING OF FRESH, COLD SMOKED SALMON AND SIMILAR KINDS OF FISH. THE SLICER CUTS LONG AND CONSISTENT THIN SLICES FROM THE TOTAL LENGTH OF THE PRODUCT
Vendedor: UFM
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MADO types: