16 ofertas

Año de construcción: usado
Precio: 19.500 €
Ubicación: Land-paletten-drive-in rack, bito, max. 500 kg / pallet, height 6 meters, approximately 1,008 pitches - used:
 
price from site: â?¬19.500.-(net) plus dismantling etc.!
 
㪠only �19,34 / pitch!
 
manufacturer: bito
type: running-in shelf
year of construction: 2010
support type: p3
pallet weight: 500 kg
for euro-pallet: 800x1200x1700mm
storage: horizontal
number of shelves one above the other: 3
subject distance: 1,850 mm (can be changed)
number of channels: 16 entrances = 1008 pitches
depth of the channels: approx. 17, 30 m
height: approx. 6m
width of the rack system: approx. 22 m
condition: good
available: available now
location: space magdeburg PALETTEN-DRIVE-IN RACK, BITO, MAX. 500 KG / PALLET, HEIGHT 6 METERS, APPROXIMATELY 1,008 PITCHES - USED: PRICE FROM SITE: Â?¬19.500.-(NET) PLUS DISMANTLING ETC.! ê ONLY Â?¬19,34 / PITCH! MANUFACTURER: BITO TYPE: RUNNING-IN SHELF YEAR OF CONSTRUCTION: 2010 SUPPORT TYPE: P3 PALLET WEIGHT: 500 KG FOR EURO-PALLET: 800X1200X1700MM STORAGE: HORIZONTAL NUMBER OF SHELVES ONE ABOVE THE OTHER: 3 SUBJECT DISTANCE: 1,850 MM (CAN BE CHANGED) NUMBER OF CHANNELS: 16 ENTRANCES = 1008 PITCHES DEPTH OF THE CHANNELS: APPROX. 17, 30 M HEIGHT: APPROX. 6M WIDTH OF THE RACK SYSTEM: APPROX. 22 M CONDITION: GOOD AVAILABLE: AVAILABLE NOW LOCATION: SPACE MAGDEBURG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-de Germany, 74211 Leingarten
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-cnc 5-axis machining centre homag, type: bmg311/42/f/r, yom: 2015
machine number 0-201-23-0347
workpiece length
single 4200 mm; suspension 500-2440 mm - all units
individually 4375 mm; suspension 500-2615 mm-wz-diameter. 25 mm
workpiece width front 950 mm; rear 1400 mm rear - all units
front 1050 mm; back in 1550 mm milling wz-by. 25 mm
workpiece thickness of max 270 mm incl. clamping device
up to 60 mm with standard release procedures speed vector speed 70 m / min x = 35 m / min; y-axis = 60 m / min
z axis = 25 m / min
machine assembly: clamping table grid table: l = 4500 x w = 1500 mm
grid size 30 mm, groove width 7 mm, depth 7 mm, vacuum holes distance 120 mm
 
5-axis main spindle 10 kw drive 5 c of gimbal 5 achkopf for milling, drilling and sawing with any angle, interface for hsk 63 liquid cooling
	
plate changer 14 possible tools and aggregate equipment: 14 x diameter max 130 mm or 7 x diameter of maximum 180 mm + 7 x diameter 70 mm 600/720 m â³/h 2 vacuum system vacuum pump with nominal power 300 mâ³/h control may 2018 woodwop 7 / power control pc 85 plat zbedarf w/l/h 4500 x 9500 x 3000 mm
weight 8000 kg
site 39122 magdeburg

(errors and omissions in the technical data as well as subject to prior sale)

CNC 5-AXIS MACHINING CENTRE HOMAG, TYPE: BMG311/42/F/R, YOM: 2015 MACHINE NUMBER 0-201-23-0347 WORKPIECE LENGTH SINGLE 4200 MM; SUSPENSION 500-2440 MM - ALL UNITS INDIVIDUALLY 4375 MM; SUSPENSION 500-2615 MM-WZ-DIAMETER. 25 MM WORKPIECE WIDTH FRONT 950 MM; REAR 1400 MM REAR - ALL UNITS FRONT 1050 MM; BACK IN 1550 MM MILLING WZ-BY. 25 MM WORKPIECE THICKNESS OF MAX 270 MM INCL. CLAMPING DEVICE UP TO 60 MM WITH STANDARD RELEASE PROCEDURES SPEED VECTOR SPEED 70 M / MIN X = 35 M / MIN; Y-AXIS = 60 M / MIN Z AXIS = 25 M / MIN MACHINE ASSEMBLY: CLAMPING TABLE GRID TABLE: L = 4500 X W = 1500 MM GRID SIZE 30 MM, GROOVE WIDTH 7 MM, DEPTH 7 MM, VACUUM HOLES DISTANCE 120 MM 5-AXIS MAIN SPINDLE 10 KW DRIVE 5 C OF GIMBAL 5 ACHKOPF FOR MILLING, DRILLING AND SAWING WITH ANY ANGLE, INTERFACE FOR HSK 63 LIQUID COOLING PLATE CHANGER 14 POSSIBLE TOOLS AND AGGREGATE EQUIPMENT: 14 X DIAMETER MAX 130 MM OR 7 X DIAMETER OF MAXIMUM 180 MM + 7 X DIAMETER 70 MM 600/720 M ³/H 2 VACUUM SYSTEM VACUUM PUMP WITH NOMINAL POWER 300 M³/H CONTROL MAY 2018 WOODWOP 7 / POWER CONTROL PC 85 PLAT ZBEDARF W/L/H 4500 X 9500 X 3000 MM WEIGHT 8000 KG SITE 39122 MAGDEBURG (ERRORS AND OMISSIONS IN THE TECHNICAL DATA AS WELL AS SUBJECT TO PRIOR SALE)
Vendedor: GROMAR Mariola Groyecki
Año de construcción: usado
Ubicación: Land-de Germany, 74211 Leingarten
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-collector schuko, year: 2015
filter unit vacomat n-1000 20/50
filter surface area 50 mâ²
type of filter medium dry
filter regeneration pneumatic/mechanical; air consumption: 45 l with 4-6 bar per regeneration process
clean air fan type: vacovent 750 in the sound enclosure of the filter construction unit
power 7,5 kw; volumenstron 4900 mâ³/h at a pressure of 3,400 pa
swarf collection tray 2 piece + 2 ersatztspã¤nesammelbehã¤lter
automatic extinguishing system dimensions filter house lxwxh 1520 x 1520 x 2570 mm
dimensions base lxwxh 1600 x 1750 x 1500 mm
site 39126 magdeburg

(errors and omissions in the technical data as well as subject to prior sale)

COLLECTOR SCHUKO, YEAR: 2015 FILTER UNIT VACOMAT N-1000 20/50 FILTER SURFACE AREA 50 M² TYPE OF FILTER MEDIUM DRY FILTER REGENERATION PNEUMATIC/MECHANICAL; AIR CONSUMPTION: 45 L WITH 4-6 BAR PER REGENERATION PROCESS CLEAN AIR FAN TYPE: VACOVENT 750 IN THE SOUND ENCLOSURE OF THE FILTER CONSTRUCTION UNIT POWER 7,5 KW; VOLUMENSTRON 4900 M³/H AT A PRESSURE OF 3,400 PA SWARF COLLECTION TRAY 2 PIECE + 2 ERSATZTSPäNESAMMELBEHäLTER AUTOMATIC EXTINGUISHING SYSTEM DIMENSIONS FILTER HOUSE LXWXH 1520 X 1520 X 2570 MM DIMENSIONS BASE LXWXH 1600 X 1750 X 1500 MM SITE 39126 MAGDEBURG (ERRORS AND OMISSIONS IN THE TECHNICAL DATA AS WELL AS SUBJECT TO PRIOR SALE)
Vendedor: GROMAR Mariola Groyecki
Año de construcción: usado
Ubicación: Land-make: magdeburger<br/>year of manufacture: 1995<br/>type of machine: m 130<br/>cutting diameter: 250 mm<br/>control system: sinumerik 840 c<br/>turning length: 1000 mm<br/>bar: 77 mm<br/>speed range: 5.000 u/min<br/>tool turret: 12<br/> MAKE: MAGDEBURGER
YEAR OF MANUFACTURE: 1995
TYPE OF MACHINE: M 130
CUTTING DIAMETER: 250 MM
CONTROL SYSTEM: SINUMERIK 840 C
TURNING LENGTH: 1000 MM
BAR: 77 MM
SPEED RANGE: 5.000 U/MIN
TOOL TURRET: 12
Vendedor: Erdmann Export-Import
Año de construcción: usado
Precio: 18.000 €
Ubicación: Land-skl-magdeburg 36 / 24, b. in 1985, 270 hours. , 600 hp at 500 rpm, 500 kva, before 8 weeks last test run prior to removal. 17000 kg, excellent condition. SKL-MAGDEBURG 36 / 24, B. IN 1985, 270 HOURS. , 600 HP AT 500 RPM, 500 KVA, BEFORE 8 WEEKS LAST TEST RUN PRIOR TO REMOVAL. 17000 KG, EXCELLENT CONDITION.
Vendedor: DHT Carola Selck
Año de construcción: usado
Ubicación: Land-turning diameter: 550 mm<br/>turning length: 2000 mm<br/>control: sin840c <br/>swing over bed: 800 mm<br/>swing diameter over slide rest: 550 mm<br/>working diameter: 690 mm<br/>cross movement. (x-axis): 450 mm<br/>longitudinal traverse (z-axis): 2.100 mm<br/>y-axis: +/- 100 mm<br/>feed x/y/z-axis: 1 - 10.000 mm/min<br/>feed force x axis: 7,50 / 10,00 kn<br/>feed force z axis: 16,50 / 22,50 kn<br/>speeds: 4,6 - 2.800 u/min<br/>power capacity at 100 % load: 52,00 kw<br/>power capacity at 64 % load: 65,00 kw<br/>spindle diameter in front bearing: 170 mm<br/>spindle bore: 105 mm<br/>max. workpiece weight -without tailstock: 600 kg<br/>c-axis: 360 x 0,001 °<br/>driven tools turning speeds: 25 - 3.000 u/min<br/>number of tools: 12 <br/>tool taper: p90-din 69881 <br/>shaft cross cut: 32x32 mm<br/>steady for max. workpiece diameter from: 320 mm<br/>total power requirement: 78,00 kw<br/>weight of the machine ca.: 20,00 t<br/>dimensions of the machine ca.: 6,50 x 3,20 x h3,20 m<br/>cnc lathe with control simens sinumerik 840c, y-axis, tailstock,<br/>steady rest (smw / slu-5 / 60-320mm), c-axis, powered tools, coolant unit,<br/>chip conveyor, dust exhauster.<br/>machine can be inspected under power.<br/><br/><br/><br/><br/> TURNING DIAMETER: 550 MM
TURNING LENGTH: 2000 MM
CONTROL: SIN840C
SWING OVER BED: 800 MM
SWING DIAMETER OVER SLIDE REST: 550 MM
WORKING DIAMETER: 690 MM
CROSS MOVEMENT. (X-AXIS): 450 MM
LONGITUDINAL TRAVERSE (Z-AXIS): 2.100 MM
Y-AXIS: +/- 100 MM
FEED X/Y/Z-AXIS: 1 - 10.000 MM/MIN
FEED FORCE X AXIS: 7,50 / 10,00 KN
FEED FORCE Z AXIS: 16,50 / 22,50 KN
SPEEDS: 4,6 - 2.800 U/MIN
POWER CAPACITY AT 100 % LOAD: 52,00 KW
POWER CAPACITY AT 64 % LOAD: 65,00 KW
SPINDLE DIAMETER IN FRONT BEARING: 170 MM
SPINDLE BORE: 105 MM
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK: 600 KG
C-AXIS: 360 X 0,001 °
DRIVEN TOOLS TURNING SPEEDS: 25 - 3.000 U/MIN
NUMBER OF TOOLS: 12
TOOL TAPER: P90-DIN 69881
SHAFT CROSS CUT: 32X32 MM
STEADY FOR MAX. WORKPIECE DIAMETER FROM: 320 MM
TOTAL POWER REQUIREMENT: 78,00 KW
WEIGHT OF THE MACHINE CA.: 20,00 T
DIMENSIONS OF THE MACHINE CA.: 6,50 X 3,20 X H3,20 M
CNC LATHE WITH CONTROL SIMENS SINUMERIK 840C, Y-AXIS, TAILSTOCK,
STEADY REST (SMW / SLU-5 / 60-320MM), C-AXIS, POWERED TOOLS, COOLANT UNIT,
CHIP CONVEYOR, DUST EXHAUSTER.
MACHINE CAN BE INSPECTED UNDER POWER.




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-radial engine magdeburg
course: 2.5 m
arm: 1.6 m
with table
manufactured: germany   RADIAL ENGINE MAGDEBURG COURSE: 2.5 M ARM: 1.6 M WITH TABLE MANUFACTURED: GERMANY
Vendedor: occasionmachines
Año de construcción: usado
Ubicación: Land-turning diameter: 580 mm<br/>turning length: 915 mm<br/>control: siemens 840 d <br/>swing over bed: 580 mm<br/>swing diameter over slide rest: 410 mm<br/>x-travel: 450 mm<br/>z-travel: 915 mm<br/>y-axis: +100 / -50 mm<br/>c-axis: 0,001° deg.<br/>spindle bore: 97 mm<br/>spindle head: din55026 a8 <br/>spindle turning speed - stepless: 12,6 - 4000 u/min<br/>max. torque on the spindle: 1000 nm<br/>transmission ratio: 2 <br/>max. workpiece weight -without tailstock: 300 kg<br/>rapid travel - longitudinal/face: 15 m/min<br/>tailstock quill diameter: 95 mm<br/>tailstock quill stroke: 140 mm<br/>taper in tailstock mt: 4 <br/>main drive motor: (100/50% ed) 37 / 53 kw<br/>dimensions: 5,3 x 2,5 x 2,8 m<br/>total power requirement: 70 kva<br/>weight of the machine ca.: 8,5 t<br/>well-maintained cnc lathe with y-axis<br/>the machine has about 47000 hours of power on<br/>the following repairs have been carried out in the meantime:<br/>1. the controller, including hard drive and the interface v24 which in the<br/>pedal sits was renewed on feb. 2014.<br/>2. the chip conveyor was re-stored and got a new chain in may 2016<br/>3. the main drive module as well as the modules for the x-axis and z-axis in the<br/>control cabinets were renewed by siemens in june / and august 2016.<br/>this means that all important components have been renewed in recent years.<br/><br/>* cnc-control siemens 840d<br/>* 12-station turret<br/>* driven tools, motor 12 kw (40% ed), speed range 25-3000 rpm.<br/>* c-axis<br/>* y-axis<br/>* power chuck forkardt, diameter 315 mm<br/>* swarf conveyor<br/>* tailstock<br/>* several tool holders<br/>* spare part, new ball screw<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 580 MM
TURNING LENGTH: 915 MM
CONTROL: SIEMENS 840 D
SWING OVER BED: 580 MM
SWING DIAMETER OVER SLIDE REST: 410 MM
X-TRAVEL: 450 MM
Z-TRAVEL: 915 MM
Y-AXIS: +100 / -50 MM
C-AXIS: 0,001° DEG.
SPINDLE BORE: 97 MM
SPINDLE HEAD: DIN55026 A8
SPINDLE TURNING SPEED - STEPLESS: 12,6 - 4000 U/MIN
MAX. TORQUE ON THE SPINDLE: 1000 NM
TRANSMISSION RATIO: 2
MAX. WORKPIECE WEIGHT -WITHOUT TAILSTOCK: 300 KG
RAPID TRAVEL - LONGITUDINAL/FACE: 15 M/MIN
TAILSTOCK QUILL DIAMETER: 95 MM
TAILSTOCK QUILL STROKE: 140 MM
TAPER IN TAILSTOCK MT: 4
MAIN DRIVE MOTOR: (100/50% ED) 37 / 53 KW
DIMENSIONS: 5,3 X 2,5 X 2,8 M
TOTAL POWER REQUIREMENT: 70 KVA
WEIGHT OF THE MACHINE CA.: 8,5 T
WELL-MAINTAINED CNC LATHE WITH Y-AXIS
THE MACHINE HAS ABOUT 47000 HOURS OF POWER ON
THE FOLLOWING REPAIRS HAVE BEEN CARRIED OUT IN THE MEANTIME:
1. THE CONTROLLER, INCLUDING HARD DRIVE AND THE INTERFACE V24 WHICH IN THE
PEDAL SITS WAS RENEWED ON FEB. 2014.
2. THE CHIP CONVEYOR WAS RE-STORED AND GOT A NEW CHAIN IN MAY 2016
3. THE MAIN DRIVE MODULE AS WELL AS THE MODULES FOR THE X-AXIS AND Z-AXIS IN THE
CONTROL CABINETS WERE RENEWED BY SIEMENS IN JUNE / AND AUGUST 2016.
THIS MEANS THAT ALL IMPORTANT COMPONENTS HAVE BEEN RENEWED IN RECENT YEARS.

* CNC-CONTROL SIEMENS 840D
* 12-STATION TURRET
* DRIVEN TOOLS, MOTOR 12 KW (40% ED), SPEED RANGE 25-3000 RPM.
* C-AXIS
* Y-AXIS
* POWER CHUCK FORKARDT, DIAMETER 315 MM
* SWARF CONVEYOR
* TAILSTOCK
* SEVERAL TOOL HOLDERS
* SPARE PART, NEW BALL SCREW





Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-
general characteristics  
advances min / max spindle chuck  0,032/1,5  
max. distance spindle axis column  1.200 mm  
no. drill spindle speeds  15  
number of drill spindle advances  12  
speed  22,4/2.800 r.p.m.  
spindle displacement  360 mm  
Ø column  300 mm  
Ø spindle  80 mm  
table features  
maximum distance table to spindle  1.100 mm  
minimum distance table to spindle  750 mm  
surface of the table  1.300 x 750 mm  
electrical characteristics  
voltage  220/380v  
dimensions and weights  
high  2.900 mm  
long  2.200 mm  
weight  2.350 kg  
width  900 mm  
other features  
no. manufacturing  334  
total power  5.3 kw  
 
 
 GENERAL CHARACTERISTICS ADVANCES MIN / MAX SPINDLE CHUCK 0,032/1,5 MAX. DISTANCE SPINDLE AXIS COLUMN 1.200 MM NO. DRILL SPINDLE SPEEDS 15 NUMBER OF DRILL SPINDLE ADVANCES 12 SPEED 22,4/2.800 R.P.M. SPINDLE DISPLACEMENT 360 MM Ø COLUMN 300 MM Ø SPINDLE 80 MM TABLE FEATURES MAXIMUM DISTANCE TABLE TO SPINDLE 1.100 MM MINIMUM DISTANCE TABLE TO SPINDLE 750 MM SURFACE OF THE TABLE 1.300 X 750 MM ELECTRICAL CHARACTERISTICS VOLTAGE 220/380V DIMENSIONS AND WEIGHTS HIGH 2.900 MM LONG 2.200 MM WEIGHT 2.350 KG WIDTH 900 MM OTHER FEATURES NO. MANUFACTURING 334 TOTAL POWER 5.3 KW
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-bore diameter: max. 56 mm<br/>tool taper: mk 5 <br/>throat: 1600 mm<br/>turning speeds: 14 - 1800 u/min<br/>feed: 0,032 - 1,6 mm/u<br/>total power requirement: 7,50 kw<br/>weight of the machine ca.: 4,60 t<br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> BORE DIAMETER: MAX. 56 MM
TOOL TAPER: MK 5
THROAT: 1600 MM
TURNING SPEEDS: 14 - 1800 U/MIN
FEED: 0,032 - 1,6 MM/U
TOTAL POWER REQUIREMENT: 7,50 KW
WEIGHT OF THE MACHINE CA.: 4,60 T



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-top prism above 140 mm turning length 500 mm turning diameter over bed 300 mm turning diameter over continuous slide 170 mm spindle bore 25 mm 4 feed rates for each plan and longitudinal accessories: hand lever tailstock revolving lathe 2. steel bracket on cross support a roehm dreibackenfuetter a röhm four jaw chuck drive plate for lathe cable with cee plug 16 a manual eelektroschaltplan machine weight approx. 950 kg      TOP PRISM ABOVE 140 MM TURNING LENGTH 500 MM TURNING DIAMETER OVER BED 300 MM TURNING DIAMETER OVER CONTINUOUS SLIDE 170 MM SPINDLE BORE 25 MM 4 FEED RATES FOR EACH PLAN AND LONGITUDINAL ACCESSORIES: HAND LEVER TAILSTOCK REVOLVING LATHE 2. STEEL BRACKET ON CROSS SUPPORT A ROEHM DREIBACKENFUETTER A RöHM FOUR JAW CHUCK DRIVE PLATE FOR LATHE CABLE WITH CEE PLUG 16 A MANUAL EELEKTROSCHALTPLAN MACHINE WEIGHT APPROX. 950 KG
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-faceplate diameter: 3550 mm<br/>total power requirement: 55 kw<br/>weight of the machine ca.: 29 t<br/>centre height: 1250 mm<br/>turning diameter: max. 4500 mm<br/>turning speeds: 0,9 - 90 u/min<br/>feed: 0,06 - 8 mm/min<br/>bed height over floor: 560 mm <br/>bed slide: 1300 mm <br/>cross slide - travel: 750 mm<br/>travel of compound slide-rest: 620 mm<br/>max. torque on the faceplate: max. 50 knm <br/>flute distance: 250 mm <br/>rapide traverse: 5000 mm/min<br/>digital readout: heidenhain positip 855 <br/>turning length: 750 mm<br/>plate field: 1 <br/>supports: 2 <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> FACEPLATE DIAMETER: 3550 MM
TOTAL POWER REQUIREMENT: 55 KW
WEIGHT OF THE MACHINE CA.: 29 T
CENTRE HEIGHT: 1250 MM
TURNING DIAMETER: MAX. 4500 MM
TURNING SPEEDS: 0,9 - 90 U/MIN
FEED: 0,06 - 8 MM/MIN
BED HEIGHT OVER FLOOR: 560 MM
BED SLIDE: 1300 MM
CROSS SLIDE - TRAVEL: 750 MM
TRAVEL OF COMPOUND SLIDE-REST: 620 MM
MAX. TORQUE ON THE FACEPLATE: MAX. 50 KNM
FLUTE DISTANCE: 250 MM
RAPIDE TRAVERSE: 5000 MM/MIN
DIGITAL READOUT: HEIDENHAIN POSITIP 855
TURNING LENGTH: 750 MM
PLATE FIELD: 1
SUPPORTS: 2



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Precio: 18.000 €
Ubicación: Land-out of a v60 locomotive we got the engine. engine is running well-no further information

available so other parts of v60 (transmission has been sold already)

we are so ready to sell only parts of the engine    OUT OF A V60 LOCOMOTIVE WE GOT THE ENGINE. ENGINE IS RUNNING WELL-NO FURTHER INFORMATION AVAILABLE SO OTHER PARTS OF V60 (TRANSMISSION HAS BEEN SOLD ALREADY) WE ARE SO READY TO SELL ONLY PARTS OF THE ENGINE
Vendedor: Techno-Commerce GmbH
Año de construcción: usado
Ubicación: Land-siemens sinumerik 880 ge<br>centre height (mm) 270<br>centre distance (mm) <br>spindle bore (mm) <br> SIEMENS SINUMERIK 880 GE
CENTRE HEIGHT (MM) 270
CENTRE DISTANCE (MM)
SPINDLE BORE (MM)
Vendedor: Muller Machines SA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more MAGDEBURG types: